diff options
Diffstat (limited to 'drivers/staging/wlags49_h2/wl_if.h')
| -rw-r--r-- | drivers/staging/wlags49_h2/wl_if.h | 221 |
1 files changed, 221 insertions, 0 deletions
diff --git a/drivers/staging/wlags49_h2/wl_if.h b/drivers/staging/wlags49_h2/wl_if.h new file mode 100644 index 00000000..425d3733 --- /dev/null +++ b/drivers/staging/wlags49_h2/wl_if.h @@ -0,0 +1,221 @@ +/******************************************************************************* + * Agere Systems Inc. + * Wireless device driver for Linux (wlags49). + * + * Copyright (c) 1998-2003 Agere Systems Inc. + * All rights reserved. + * http://www.agere.com + * + * Initially developed by TriplePoint, Inc. + * http://www.triplepoint.com + * + *------------------------------------------------------------------------------ + * + * Driver common header for info needed by driver source and user-space + * processes communicating with the driver. + * + *------------------------------------------------------------------------------ + * + * SOFTWARE LICENSE + * + * This software is provided subject to the following terms and conditions, + * which you should read carefully before using the software. Using this + * software indicates your acceptance of these terms and conditions. If you do + * not agree with these terms and conditions, do not use the software. + * + * Copyright © 2003 Agere Systems Inc. + * All rights reserved. + * + * Redistribution and use in source or binary forms, with or without + * modifications, are permitted provided that the following conditions are met: + * + * . Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following Disclaimer as comments in the code as + * well as in the documentation and/or other materials provided with the + * distribution. + * + * . Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following Disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * . Neither the name of Agere Systems Inc. nor the names of the contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Disclaimer + * + * THIS SOFTWARE IS PROVIDED AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY + * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN + * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + ******************************************************************************/ + +#ifndef __WAVELAN2_IF_H__ +#define __WAVELAN2_IF_H__ + + + + +/******************************************************************************* + * constant definitions + ******************************************************************************/ +#define MAX_LTV_BUF_SIZE (512 - (sizeof(hcf_16) * 2)) + +#define HCF_TALLIES_SIZE (sizeof(CFG_HERMES_TALLIES_STRCT) + \ + (sizeof(hcf_16) * 2)) + +#define HCF_MAX_MULTICAST 16 +#define HCF_MAX_NAME_LEN 32 +#define MAX_LINE_SIZE 256 +#define HCF_NUM_IO_PORTS 0x80 +#define TX_TIMEOUT ((800 * HZ) / 1000) + + +/* PE1DNN + * Better data from the real world. Not scientific but empirical data gathered + * from a Thomson Speedtouch 110 which is identified as: + * PCMCIA Info: "Agere Systems" "Wireless PC Card Model 0110" + * Manufacture ID: 0156,0003 + * Lowest measurment for noise floor seen is value 54 + * Highest signal strength in close proximity to the AP seen is value 118 + * Very good must be around 100 (otherwise its never "full scale" + * All other constants are derrived from these. This makes the signal gauge + * work for me... + */ +#define HCF_MIN_SIGNAL_LEVEL 54 +#define HCF_MAX_SIGNAL_LEVEL 100 +#define HCF_MIN_NOISE_LEVEL HCF_MIN_SIGNAL_LEVEL +#define HCF_MAX_NOISE_LEVEL HCF_MAX_SIGNAL_LEVEL +#define HCF_0DBM_OFFSET (HCF_MAX_SIGNAL_LEVEL + 1) +#define HCF_MIN_COMM_QUALITY 0 +#define HCF_MAX_COMM_QUALITY (HCF_MAX_SIGNAL_LEVEL - \ + HCF_MIN_NOISE_LEVEL + 1) + + +/* For encryption (WEP) */ +#define MIN_KEY_SIZE 5 /* 40 bits RC4 - WEP */ +#define MAX_KEY_SIZE 13 /* 104 bits */ +#define MAX_KEYS 4 + +#define RADIO_CHANNELS 14 +#define RADIO_SENSITIVITY_LEVELS 3 +#define RADIO_TX_POWER_MWATT 32 +#define RADIO_TX_POWER_DBM 15 + +#define MIN_RTS_BYTES 0 +#define MAX_RTS_BYTES 2347 + +#define MAX_RATES 8 +#define MEGABIT (1024 * 1024) + +#define HCF_FAILURE 0xFF +#define UIL_FAILURE 0xFF +#define CFG_UIL_CONNECT 0xA123 /* Define differently? */ +#define CFG_UIL_CONNECT_ACK_CODE 0x5653435A /* VSCZ */ +#define WVLAN2_UIL_CONNECTED (0x01L << 0) +#define WVLAN2_UIL_BUSY (0x01L << 1) + + + + +/******************************************************************************* + * driver ioctl interface + ******************************************************************************/ +#define WVLAN2_IOCTL_UIL SIOCDEVPRIVATE + +/* The UIL Interface used in conjunction with the WVLAN2_IOCTL_UIL code above + is defined in mdd.h. A quick reference of the UIL codes is listed below */ +/* +UIL_FUN_CONNECT +UIL_FUN_DISCONNECT +UIL_FUN_ACTION + UIL_ACT_BLOCK + UIL_ACT_UNBLOCK + UIL_ACT_SCA + UIL_ACT_DIAG + UIL_ACT_APPLY +UIL_FUN_SEND_DIAG_MSG +UIL_FUN_GET_INFO +UIL_FUN_PUT_INFO +*/ + +#define SIOCSIWNETNAME (SIOCDEVPRIVATE + 1) +#define SIOCGIWNETNAME (SIOCDEVPRIVATE + 2) +#define SIOCSIWSTANAME (SIOCDEVPRIVATE + 3) +#define SIOCGIWSTANAME (SIOCDEVPRIVATE + 4) +#define SIOCSIWPORTTYPE (SIOCDEVPRIVATE + 5) +#define SIOCGIWPORTTYPE (SIOCDEVPRIVATE + 6) + +/* IOCTL code for the RTS interface */ +#define WL_IOCTL_RTS (SIOCDEVPRIVATE + 7) + +/* IOCTL subcodes for WL_IOCTL_RTS */ +#define WL_IOCTL_RTS_READ 1 +#define WL_IOCTL_RTS_WRITE 2 +#define WL_IOCTL_RTS_BATCH_READ 3 +#define WL_IOCTL_RTS_BATCH_WRITE 4 + + +/******************************************************************************* + * STRUCTURE DEFINITIONS + ******************************************************************************/ +typedef struct { + __u16 length; + __u8 name[HCF_MAX_NAME_LEN]; +} +wvName_t; + + +typedef struct { + hcf_16 len; + hcf_16 typ; + union { + hcf_8 u8[MAX_LTV_BUF_SIZE / sizeof(hcf_8)]; + hcf_16 u16[MAX_LTV_BUF_SIZE / sizeof(hcf_16)]; + hcf_32 u32[MAX_LTV_BUF_SIZE / sizeof(hcf_32)]; + } u; +} +ltv_t; + + +struct uilreq { + union { + char ifrn_name[IFNAMSIZ]; + } ifr_ifrn; + + IFBP hcfCtx; + __u8 command; + __u8 result; + + /* The data field in this structure is typically an LTV of some type. + The len field is the size of the buffer in bytes, as opposed to words + (like the L-field in the LTV */ + __u16 len; + void *data; +}; + + +struct rtsreq { + union { + char ifrn_name[IFNAMSIZ]; + } + ifr_ifrn; + + __u16 typ; + __u16 reg; + __u16 len; + __u16 *data; +}; + + +#endif /* __WAVELAN2_IF_H__ */ + |