Initial file dump from open source releaseHEADmaster

1 files changed, 221 insertions, 0 deletions

diff --git a/drivers/staging/wlags49_h2/wl_if.h b/drivers/staging/wlags49_h2/wl_if.h
new file mode 100644
index 00000000..425d3733
--- /dev/null
+++ b/drivers/staging/wlags49_h2/wl_if.h
@@ -0,0 +1,221 @@
+/*******************************************************************************
+ * Agere Systems Inc.
+ * Wireless device driver for Linux (wlags49).
+ *
+ * Copyright (c) 1998-2003 Agere Systems Inc.
+ * All rights reserved.
+ *   http://www.agere.com
+ *
+ * Initially developed by TriplePoint, Inc.
+ *   http://www.triplepoint.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ *   Driver common header for info needed by driver source and user-space
+ *   processes communicating with the driver.
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software.  Using this
+ * software indicates your acceptance of these terms and conditions.  If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2003 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following Disclaimer as comments in the code as
+ *    well as in the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following Disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ ******************************************************************************/
+
+#ifndef __WAVELAN2_IF_H__
+#define __WAVELAN2_IF_H__
+
+
+
+
+/*******************************************************************************
+ *  constant definitions
+ ******************************************************************************/
+#define MAX_LTV_BUF_SIZE            (512 - (sizeof(hcf_16) * 2))
+
+#define HCF_TALLIES_SIZE            (sizeof(CFG_HERMES_TALLIES_STRCT) + \
+				    (sizeof(hcf_16) * 2))
+
+#define HCF_MAX_MULTICAST           16
+#define HCF_MAX_NAME_LEN            32
+#define MAX_LINE_SIZE               256
+#define HCF_NUM_IO_PORTS            0x80
+#define TX_TIMEOUT                  ((800 * HZ) / 1000)
+
+
+/* PE1DNN
+ * Better data from the real world. Not scientific but empirical data gathered
+ * from a Thomson Speedtouch 110 which is identified as:
+ * PCMCIA Info: "Agere Systems" "Wireless PC Card Model 0110"
+ *              Manufacture ID: 0156,0003
+ * Lowest measurment for noise floor seen is value 54
+ * Highest signal strength in close proximity to the AP seen is value 118
+ * Very good must be around 100 (otherwise its never "full scale"
+ * All other constants are derrived from these. This makes the signal gauge
+ * work for me...
+ */
+#define HCF_MIN_SIGNAL_LEVEL        54
+#define HCF_MAX_SIGNAL_LEVEL        100
+#define HCF_MIN_NOISE_LEVEL         HCF_MIN_SIGNAL_LEVEL
+#define HCF_MAX_NOISE_LEVEL         HCF_MAX_SIGNAL_LEVEL
+#define HCF_0DBM_OFFSET             (HCF_MAX_SIGNAL_LEVEL + 1)
+#define HCF_MIN_COMM_QUALITY        0
+#define HCF_MAX_COMM_QUALITY        (HCF_MAX_SIGNAL_LEVEL - \
+					HCF_MIN_NOISE_LEVEL + 1)
+
+
+/* For encryption (WEP) */
+#define MIN_KEY_SIZE                5       /* 40 bits RC4 - WEP */
+#define MAX_KEY_SIZE                13      /* 104 bits */
+#define MAX_KEYS                    4
+
+#define RADIO_CHANNELS              14
+#define RADIO_SENSITIVITY_LEVELS    3
+#define RADIO_TX_POWER_MWATT        32
+#define RADIO_TX_POWER_DBM          15
+
+#define MIN_RTS_BYTES               0
+#define MAX_RTS_BYTES               2347
+
+#define MAX_RATES                   8
+#define MEGABIT                     (1024 * 1024)
+
+#define HCF_FAILURE                 0xFF
+#define UIL_FAILURE		            0xFF
+#define CFG_UIL_CONNECT             0xA123          /* Define differently? */
+#define CFG_UIL_CONNECT_ACK_CODE    0x5653435A      /* VSCZ */
+#define WVLAN2_UIL_CONNECTED        (0x01L << 0)
+#define WVLAN2_UIL_BUSY             (0x01L << 1)
+
+
+
+
+/*******************************************************************************
+ * driver ioctl interface
+ ******************************************************************************/
+#define WVLAN2_IOCTL_UIL            SIOCDEVPRIVATE
+
+/* The UIL Interface used in conjunction with the WVLAN2_IOCTL_UIL code above
+   is defined in mdd.h. A quick reference of the UIL codes is listed below */
+/*
+UIL_FUN_CONNECT
+UIL_FUN_DISCONNECT
+UIL_FUN_ACTION
+    UIL_ACT_BLOCK
+    UIL_ACT_UNBLOCK
+    UIL_ACT_SCA
+    UIL_ACT_DIAG
+    UIL_ACT_APPLY
+UIL_FUN_SEND_DIAG_MSG
+UIL_FUN_GET_INFO
+UIL_FUN_PUT_INFO
+*/
+
+#define SIOCSIWNETNAME              (SIOCDEVPRIVATE + 1)
+#define SIOCGIWNETNAME              (SIOCDEVPRIVATE + 2)
+#define SIOCSIWSTANAME              (SIOCDEVPRIVATE + 3)
+#define SIOCGIWSTANAME              (SIOCDEVPRIVATE + 4)
+#define SIOCSIWPORTTYPE             (SIOCDEVPRIVATE + 5)
+#define SIOCGIWPORTTYPE             (SIOCDEVPRIVATE + 6)
+
+/* IOCTL code for the RTS interface */
+#define WL_IOCTL_RTS                (SIOCDEVPRIVATE + 7)
+
+/* IOCTL subcodes for WL_IOCTL_RTS */
+#define WL_IOCTL_RTS_READ           1
+#define WL_IOCTL_RTS_WRITE          2
+#define WL_IOCTL_RTS_BATCH_READ     3
+#define WL_IOCTL_RTS_BATCH_WRITE    4
+
+
+/*******************************************************************************
+ * STRUCTURE DEFINITIONS
+ ******************************************************************************/
+typedef struct {
+	__u16   length;
+	__u8    name[HCF_MAX_NAME_LEN];
+}
+wvName_t;
+
+
+typedef struct {
+	hcf_16      len;
+	hcf_16      typ;
+	union {
+		hcf_8       u8[MAX_LTV_BUF_SIZE / sizeof(hcf_8)];
+		hcf_16      u16[MAX_LTV_BUF_SIZE / sizeof(hcf_16)];
+		hcf_32      u32[MAX_LTV_BUF_SIZE / sizeof(hcf_32)];
+	} u;
+}
+ltv_t;
+
+
+struct uilreq {
+	union {
+		char    ifrn_name[IFNAMSIZ];
+	} ifr_ifrn;
+
+	IFBP        hcfCtx;
+	__u8        command;
+	__u8        result;
+
+	/* The data field in this structure is typically an LTV of some type.
+	   The len field is the size of the buffer in bytes, as opposed to words
+	   (like the L-field in the LTV */
+	__u16       len;
+	void       *data;
+};
+
+
+struct rtsreq {
+	union {
+		char    ifrn_name[IFNAMSIZ];
+	}
+	ifr_ifrn;
+
+	__u16   typ;
+	__u16   reg;
+	__u16   len;
+	__u16   *data;
+};
+
+
+#endif  /* __WAVELAN2_IF_H__ */
+