1 files changed, 30 insertions, 0 deletions
diff --git a/boards/ek-lm4f232/usb_host_keyboard/readme.txt b/boards/ek-lm4f232/usb_host_keyboard/readme.txt
new file mode 100644
index 0000000..a2a8af9
--- /dev/null
+++ b/boards/ek-lm4f232/usb_host_keyboard/readme.txt
@@ -0,0 +1,30 @@
+USB HID Keyboard Host
+
+This example application demonstrates how to support a USB keyboard
+attached to the evaluation kit board.  The display will show if a keyboard
+is currently connected and the current state of the Caps Lock key on the
+keyboard that is connected on the bottom status area of the screen.
+Pressing any keys on the keyboard will cause them to be printed on the
+screen and to be sent out the UART at 115200 baud with no parity, 8 bits
+and 1 stop bit.  Any keyboard that supports the USB HID BIOS protocol
+should work with this demo application.
+
+-------------------------------------------------------------------------------
+
+Copyright (c) 2012-2014 Texas Instruments Incorporated.  All rights reserved.
+Software License Agreement
+
+Texas Instruments (TI) is supplying this software for use solely and
+exclusively on TI's microcontroller products. The software is owned by
+TI and/or its suppliers, and is protected under applicable copyright
+laws. You may not combine this software with "viral" open-source
+software in order to form a larger program.
+
+THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+DAMAGES, FOR ANY REASON WHATSOEVER.
+
+This is part of revision 2.1.0.12573 of the EK-LM4F232 Firmware Package.