Add more board models

1 files changed, 30 insertions, 0 deletions

diff --git a/boards/ek-lm4f232/usb_host_keyboard/readme.txt b/boards/ek-lm4f232/usb_host_keyboard/readme.txt
new file mode 100644
index 0000000..a2a8af9
--- /dev/null
+++ b/boards/ek-lm4f232/usb_host_keyboard/readme.txt
@@ -0,0 +1,30 @@
+USB HID Keyboard Host

+

+This example application demonstrates how to support a USB keyboard

+attached to the evaluation kit board.  The display will show if a keyboard

+is currently connected and the current state of the Caps Lock key on the

+keyboard that is connected on the bottom status area of the screen.

+Pressing any keys on the keyboard will cause them to be printed on the

+screen and to be sent out the UART at 115200 baud with no parity, 8 bits

+and 1 stop bit.  Any keyboard that supports the USB HID BIOS protocol

+should work with this demo application.

+

+-------------------------------------------------------------------------------

+

+Copyright (c) 2012-2014 Texas Instruments Incorporated.  All rights reserved.

+Software License Agreement

+

+Texas Instruments (TI) is supplying this software for use solely and

+exclusively on TI's microcontroller products. The software is owned by

+TI and/or its suppliers, and is protected under applicable copyright

+laws. You may not combine this software with "viral" open-source

+software in order to form a larger program.

+

+THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.

+NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT

+NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

+A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY

+CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL

+DAMAGES, FOR ANY REASON WHATSOEVER.

+

+This is part of revision 2.1.0.12573 of the EK-LM4F232 Firmware Package.