diff options
| author | Yuval Adam <yuv.adm@gmail.com> | 2014-08-08 14:42:07 +0300 |
|---|---|---|
| committer | Yuval Adam <yuv.adm@gmail.com> | 2014-08-08 14:42:07 +0300 |
| commit | a6163888f3c56123b1db313743c6147ba498732c (patch) | |
| tree | ff7d15d991d1d09ba6cbc0cec80924f57445bfdd /third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net | |
| parent | c3e4c9a25c2910d2d66d52215b3406b13d5b23d5 (diff) | |
Add third_party libs
Diffstat (limited to 'third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net')
11 files changed, 4185 insertions, 0 deletions
diff --git a/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/clock-arch.h b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/clock-arch.h new file mode 100644 index 0000000..73d32e2 --- /dev/null +++ b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/clock-arch.h @@ -0,0 +1,42 @@ +/*
+ * Copyright (c) 2006, Swedish Institute of Computer Science.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Institute nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * This file is part of the uIP TCP/IP stack
+ *
+ * $Id: clock-arch.h,v 1.2 2006/06/12 08:00:31 adam Exp $
+ */
+
+#ifndef __CLOCK_ARCH_H__
+#define __CLOCK_ARCH_H__
+
+#include "FreeRTOS.h"
+
+typedef portTickType clock_time_t;
+#define CLOCK_CONF_SECOND configTICK_RATE_HZ
+
+#endif /* __CLOCK_ARCH_H__ */
diff --git a/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/lc-switch.h b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/lc-switch.h new file mode 100644 index 0000000..17c8811 --- /dev/null +++ b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/lc-switch.h @@ -0,0 +1,76 @@ +/*
+ * Copyright (c) 2004-2005, Swedish Institute of Computer Science.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Institute nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * This file is part of the uIP TCP/IP stack
+ *
+ * Author: Adam Dunkels <adam@sics.se>
+ *
+ * $Id: lc-switch.h,v 1.2 2006/06/12 08:00:30 adam Exp $
+ */
+
+/**
+ * \addtogroup lc
+ * @{
+ */
+
+/**
+ * \file
+ * Implementation of local continuations based on switch() statment
+ * \author Adam Dunkels <adam@sics.se>
+ *
+ * This implementation of local continuations uses the C switch()
+ * statement to resume execution of a function somewhere inside the
+ * function's body. The implementation is based on the fact that
+ * switch() statements are able to jump directly into the bodies of
+ * control structures such as if() or while() statmenets.
+ *
+ * This implementation borrows heavily from Simon Tatham's coroutines
+ * implementation in C:
+ * http://www.chiark.greenend.org.uk/~sgtatham/coroutines.html
+ */
+
+#ifndef __LC_SWITCH_H__
+#define __LC_SWTICH_H__
+
+/* WARNING! lc implementation using switch() does not work if an
+ LC_SET() is done within another switch() statement! */
+
+/** \hideinitializer */
+typedef unsigned short lc_t;
+
+#define LC_INIT(s) s = 0;
+
+#define LC_RESUME(s) switch(s) { case 0:
+
+#define LC_SET(s) s = __LINE__; case __LINE__:
+
+#define LC_END(s) }
+
+#endif /* __LC_SWITCH_H__ */
+
+/** @} */
diff --git a/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/lc.h b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/lc.h new file mode 100644 index 0000000..3ad83cd --- /dev/null +++ b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/lc.h @@ -0,0 +1,131 @@ +/*
+ * Copyright (c) 2004-2005, Swedish Institute of Computer Science.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Institute nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * This file is part of the uIP TCP/IP stack
+ *
+ * Author: Adam Dunkels <adam@sics.se>
+ *
+ * $Id: lc.h,v 1.2 2006/06/12 08:00:30 adam Exp $
+ */
+
+/**
+ * \addtogroup pt
+ * @{
+ */
+
+/**
+ * \defgroup lc Local continuations
+ * @{
+ *
+ * Local continuations form the basis for implementing protothreads. A
+ * local continuation can be <i>set</i> in a specific function to
+ * capture the state of the function. After a local continuation has
+ * been set can be <i>resumed</i> in order to restore the state of the
+ * function at the point where the local continuation was set.
+ *
+ *
+ */
+
+/**
+ * \file lc.h
+ * Local continuations
+ * \author
+ * Adam Dunkels <adam@sics.se>
+ *
+ */
+
+#ifdef DOXYGEN
+/**
+ * Initialize a local continuation.
+ *
+ * This operation initializes the local continuation, thereby
+ * unsetting any previously set continuation state.
+ *
+ * \hideinitializer
+ */
+#define LC_INIT(lc)
+
+/**
+ * Set a local continuation.
+ *
+ * The set operation saves the state of the function at the point
+ * where the operation is executed. As far as the set operation is
+ * concerned, the state of the function does <b>not</b> include the
+ * call-stack or local (automatic) variables, but only the program
+ * counter and such CPU registers that needs to be saved.
+ *
+ * \hideinitializer
+ */
+#define LC_SET(lc)
+
+/**
+ * Resume a local continuation.
+ *
+ * The resume operation resumes a previously set local continuation, thus
+ * restoring the state in which the function was when the local
+ * continuation was set. If the local continuation has not been
+ * previously set, the resume operation does nothing.
+ *
+ * \hideinitializer
+ */
+#define LC_RESUME(lc)
+
+/**
+ * Mark the end of local continuation usage.
+ *
+ * The end operation signifies that local continuations should not be
+ * used any more in the function. This operation is not needed for
+ * most implementations of local continuation, but is required by a
+ * few implementations.
+ *
+ * \hideinitializer
+ */
+#define LC_END(lc)
+
+/**
+ * \var typedef lc_t;
+ *
+ * The local continuation type.
+ *
+ * \hideinitializer
+ */
+#endif /* DOXYGEN */
+
+#ifndef __LC_H__
+#define __LC_H__
+
+#ifdef LC_CONF_INCLUDE
+#include LC_CONF_INCLUDE
+#else
+#include "lc-switch.h"
+#endif /* LC_CONF_INCLUDE */
+
+#endif /* __LC_H__ */
+
+/** @} */
+/** @} */
diff --git a/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/pack_struct_end.h b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/pack_struct_end.h new file mode 100644 index 0000000..a23febe --- /dev/null +++ b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/pack_struct_end.h @@ -0,0 +1,33 @@ +#ifdef __GNUC__
+ __attribute__( (packed) );
+#endif
+
+#ifdef _SH
+ #ifdef __RENESAS__
+ ;
+ #pragma unpack
+ #endif
+#endif
+
+#ifdef __RX
+ #ifdef __RENESAS__
+ ;
+ /* Nothing to do. */
+ #endif
+#endif
+
+
+#ifdef __ICCRX__
+ ;
+ #pragma pack()
+#endif
+
+#ifdef __ICCARM__
+ ;
+ #pragma pack()
+#endif
+
+
+#ifdef __CC_ARM
+ ;
+#endif
diff --git a/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/pack_struct_start.h b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/pack_struct_start.h new file mode 100644 index 0000000..49a4dc9 --- /dev/null +++ b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/pack_struct_start.h @@ -0,0 +1,34 @@ +#ifdef __GNUC__
+
+/* Nothing to do here. */
+;
+#endif
+
+/* Used by SH2A port. */
+#ifdef _SH
+ #ifdef __RENESAS__
+ #pragma pack 1
+ #endif
+#endif
+
+
+#ifdef __RX
+ #ifdef __RENESAS__
+ /* Nothing to do. */
+ #endif
+#endif
+
+
+#ifdef __ICCRX__
+ #pragma pack(1)
+#endif
+
+
+#ifdef __ICCARM__
+ #pragma pack(1)
+#endif
+
+#ifdef __CC_ARM
+ __packed
+#endif
+
diff --git a/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/psock.h b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/psock.h new file mode 100644 index 0000000..8d41258 --- /dev/null +++ b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/psock.h @@ -0,0 +1,380 @@ +/*
+ * Copyright (c) 2004, Swedish Institute of Computer Science.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Institute nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * This file is part of the uIP TCP/IP stack
+ *
+ * Author: Adam Dunkels <adam@sics.se>
+ *
+ * $Id: psock.h,v 1.3 2006/06/12 08:00:30 adam Exp $
+ */
+
+/**
+ * \defgroup psock Protosockets library
+ * @{
+ *
+ * The protosocket library provides an interface to the uIP stack that is
+ * similar to the traditional BSD socket interface. Unlike programs
+ * written for the ordinary uIP event-driven interface, programs
+ * written with the protosocket library are executed in a sequential
+ * fashion and does not have to be implemented as explicit state
+ * machines.
+ *
+ * Protosockets only work with TCP connections.
+ *
+ * The protosocket library uses \ref pt protothreads to provide
+ * sequential control flow. This makes the protosockets lightweight in
+ * terms of memory, but also means that protosockets inherits the
+ * functional limitations of protothreads. Each protosocket lives only
+ * within a single function. Automatic variables (stack variables) are
+ * not retained across a protosocket library function call.
+ *
+ * \note Because the protosocket library uses protothreads, local
+ * variables will not always be saved across a call to a protosocket
+ * library function. It is therefore advised that local variables are
+ * used with extreme care.
+ *
+ * The protosocket library provides functions for sending data without
+ * having to deal with retransmissions and acknowledgements, as well
+ * as functions for reading data without having to deal with data
+ * being split across more than one TCP segment.
+ *
+ * Because each protosocket runs as a protothread, the protosocket has to be
+ * started with a call to PSOCK_BEGIN() at the start of the function
+ * in which the protosocket is used. Similarly, the protosocket protothread can
+ * be terminated by a call to PSOCK_EXIT().
+ *
+ */
+
+/**
+ * \file
+ * Protosocket library header file
+ * \author
+ * Adam Dunkels <adam@sics.se>
+ *
+ */
+
+#ifndef __PSOCK_H__
+#define __PSOCK_H__
+
+#include "uipopt.h"
+#include "pt.h"
+
+ /*
+ * The structure that holds the state of a buffer.
+ *
+ * This structure holds the state of a uIP buffer. The structure has
+ * no user-visible elements, but is used through the functions
+ * provided by the library.
+ *
+ */
+struct psock_buf {
+ u8_t *ptr;
+ unsigned short left;
+};
+
+/**
+ * The representation of a protosocket.
+ *
+ * The protosocket structrure is an opaque structure with no user-visible
+ * elements.
+ */
+struct psock {
+ struct pt pt, psockpt; /* Protothreads - one that's using the psock
+ functions, and one that runs inside the
+ psock functions. */
+ const u8_t *sendptr; /* Pointer to the next data to be sent. */
+ u8_t *readptr; /* Pointer to the next data to be read. */
+
+ char *bufptr; /* Pointer to the buffer used for buffering
+ incoming data. */
+
+ u16_t sendlen; /* The number of bytes left to be sent. */
+ u16_t readlen; /* The number of bytes left to be read. */
+
+ struct psock_buf buf; /* The structure holding the state of the
+ input buffer. */
+ unsigned int bufsize; /* The size of the input buffer. */
+
+ unsigned char state; /* The state of the protosocket. */
+};
+
+void psock_init(struct psock *psock, char *buffer, unsigned int buffersize);
+/**
+ * Initialize a protosocket.
+ *
+ * This macro initializes a protosocket and must be called before the
+ * protosocket is used. The initialization also specifies the input buffer
+ * for the protosocket.
+ *
+ * \param psock (struct psock *) A pointer to the protosocket to be
+ * initialized
+ *
+ * \param buffer (char *) A pointer to the input buffer for the
+ * protosocket.
+ *
+ * \param buffersize (unsigned int) The size of the input buffer.
+ *
+ * \hideinitializer
+ */
+#define PSOCK_INIT(psock, buffer, buffersize) \
+ psock_init(psock, buffer, buffersize)
+
+/**
+ * Start the protosocket protothread in a function.
+ *
+ * This macro starts the protothread associated with the protosocket and
+ * must come before other protosocket calls in the function it is used.
+ *
+ * \param psock (struct psock *) A pointer to the protosocket to be
+ * started.
+ *
+ * \hideinitializer
+ */
+#define PSOCK_BEGIN(psock) PT_BEGIN(&((psock)->pt))
+
+PT_THREAD(psock_send(struct psock *psock, const char *buf, unsigned int len));
+/**
+ * Send data.
+ *
+ * This macro sends data over a protosocket. The protosocket protothread blocks
+ * until all data has been sent and is known to have been received by
+ * the remote end of the TCP connection.
+ *
+ * \param psock (struct psock *) A pointer to the protosocket over which
+ * data is to be sent.
+ *
+ * \param data (char *) A pointer to the data that is to be sent.
+ *
+ * \param datalen (unsigned int) The length of the data that is to be
+ * sent.
+ *
+ * \hideinitializer
+ */
+#define PSOCK_SEND(psock, data, datalen) \
+ PT_WAIT_THREAD(&((psock)->pt), psock_send(psock, data, datalen))
+
+/**
+ * \brief Send a null-terminated string.
+ * \param psock Pointer to the protosocket.
+ * \param str The string to be sent.
+ *
+ * This function sends a null-terminated string over the
+ * protosocket.
+ *
+ * \hideinitializer
+ */
+#define PSOCK_SEND_STR(psock, str) \
+ PT_WAIT_THREAD(&((psock)->pt), psock_send(psock, str, strlen(str)))
+
+PT_THREAD(psock_generator_send(struct psock *psock,
+ unsigned short (*f)(void *), void *arg));
+
+/**
+ * \brief Generate data with a function and send it
+ * \param psock Pointer to the protosocket.
+ * \param generator Pointer to the generator function
+ * \param arg Argument to the generator function
+ *
+ * This function generates data and sends it over the
+ * protosocket. This can be used to dynamically generate
+ * data for a transmission, instead of generating the data
+ * in a buffer beforehand. This function reduces the need for
+ * buffer memory. The generator function is implemented by
+ * the application, and a pointer to the function is given
+ * as an argument with the call to PSOCK_GENERATOR_SEND().
+ *
+ * The generator function should place the generated data
+ * directly in the uip_appdata buffer, and return the
+ * length of the generated data. The generator function is
+ * called by the protosocket layer when the data first is
+ * sent, and once for every retransmission that is needed.
+ *
+ * \hideinitializer
+ */
+#define PSOCK_GENERATOR_SEND(psock, generator, arg) \
+ PT_WAIT_THREAD(&((psock)->pt), \
+ psock_generator_send(psock, generator, arg))
+
+
+/**
+ * Close a protosocket.
+ *
+ * This macro closes a protosocket and can only be called from within the
+ * protothread in which the protosocket lives.
+ *
+ * \param psock (struct psock *) A pointer to the protosocket that is to
+ * be closed.
+ *
+ * \hideinitializer
+ */
+#define PSOCK_CLOSE(psock) uip_close()
+
+PT_THREAD(psock_readbuf(struct psock *psock));
+/**
+ * Read data until the buffer is full.
+ *
+ * This macro will block waiting for data and read the data into the
+ * input buffer specified with the call to PSOCK_INIT(). Data is read
+ * until the buffer is full..
+ *
+ * \param psock (struct psock *) A pointer to the protosocket from which
+ * data should be read.
+ *
+ * \hideinitializer
+ */
+#define PSOCK_READBUF(psock) \
+ PT_WAIT_THREAD(&((psock)->pt), psock_readbuf(psock))
+
+PT_THREAD(psock_readto(struct psock *psock, unsigned char c));
+/**
+ * Read data up to a specified character.
+ *
+ * This macro will block waiting for data and read the data into the
+ * input buffer specified with the call to PSOCK_INIT(). Data is only
+ * read until the specifieed character appears in the data stream.
+ *
+ * \param psock (struct psock *) A pointer to the protosocket from which
+ * data should be read.
+ *
+ * \param c (char) The character at which to stop reading.
+ *
+ * \hideinitializer
+ */
+#define PSOCK_READTO(psock, c) \
+ PT_WAIT_THREAD(&((psock)->pt), psock_readto(psock, c))
+
+/**
+ * The length of the data that was previously read.
+ *
+ * This macro returns the length of the data that was previously read
+ * using PSOCK_READTO() or PSOCK_READ().
+ *
+ * \param psock (struct psock *) A pointer to the protosocket holding the data.
+ *
+ * \hideinitializer
+ */
+#define PSOCK_DATALEN(psock) psock_datalen(psock)
+
+u16_t psock_datalen(struct psock *psock);
+
+/**
+ * Exit the protosocket's protothread.
+ *
+ * This macro terminates the protothread of the protosocket and should
+ * almost always be used in conjunction with PSOCK_CLOSE().
+ *
+ * \sa PSOCK_CLOSE_EXIT()
+ *
+ * \param psock (struct psock *) A pointer to the protosocket.
+ *
+ * \hideinitializer
+ */
+#define PSOCK_EXIT(psock) PT_EXIT(&((psock)->pt))
+
+/**
+ * Close a protosocket and exit the protosocket's protothread.
+ *
+ * This macro closes a protosocket and exits the protosocket's protothread.
+ *
+ * \param psock (struct psock *) A pointer to the protosocket.
+ *
+ * \hideinitializer
+ */
+#define PSOCK_CLOSE_EXIT(psock) \
+ do { \
+ PSOCK_CLOSE(psock); \
+ PSOCK_EXIT(psock); \
+ } while(0)
+
+/**
+ * Declare the end of a protosocket's protothread.
+ *
+ * This macro is used for declaring that the protosocket's protothread
+ * ends. It must always be used together with a matching PSOCK_BEGIN()
+ * macro.
+ *
+ * \param psock (struct psock *) A pointer to the protosocket.
+ *
+ * \hideinitializer
+ */
+#define PSOCK_END(psock) PT_END(&((psock)->pt))
+
+char psock_newdata(struct psock *s);
+
+/**
+ * Check if new data has arrived on a protosocket.
+ *
+ * This macro is used in conjunction with the PSOCK_WAIT_UNTIL()
+ * macro to check if data has arrived on a protosocket.
+ *
+ * \param psock (struct psock *) A pointer to the protosocket.
+ *
+ * \hideinitializer
+ */
+#define PSOCK_NEWDATA(psock) psock_newdata(psock)
+
+/**
+ * Wait until a condition is true.
+ *
+ * This macro blocks the protothread until the specified condition is
+ * true. The macro PSOCK_NEWDATA() can be used to check if new data
+ * arrives when the protosocket is waiting.
+ *
+ * Typically, this macro is used as follows:
+ *
+ \code
+ PT_THREAD(thread(struct psock *s, struct timer *t))
+ {
+ PSOCK_BEGIN(s);
+
+ PSOCK_WAIT_UNTIL(s, PSOCK_NEWADATA(s) || timer_expired(t));
+
+ if(PSOCK_NEWDATA(s)) {
+ PSOCK_READTO(s, '\n');
+ } else {
+ handle_timed_out(s);
+ }
+
+ PSOCK_END(s);
+ }
+ \endcode
+ *
+ * \param psock (struct psock *) A pointer to the protosocket.
+ * \param condition The condition to wait for.
+ *
+ * \hideinitializer
+ */
+#define PSOCK_WAIT_UNTIL(psock, condition) \
+ PT_WAIT_UNTIL(&((psock)->pt), (condition));
+
+#define PSOCK_WAIT_THREAD(psock, condition) \
+ PT_WAIT_THREAD(&((psock)->pt), (condition))
+
+#endif /* __PSOCK_H__ */
+
+/** @} */
diff --git a/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/pt.h b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/pt.h new file mode 100644 index 0000000..00ddd44 --- /dev/null +++ b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/pt.h @@ -0,0 +1,323 @@ +/*
+ * Copyright (c) 2004-2005, Swedish Institute of Computer Science.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Institute nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * This file is part of the uIP TCP/IP stack
+ *
+ * Author: Adam Dunkels <adam@sics.se>
+ *
+ * $Id: pt.h,v 1.2 2006/06/12 08:00:30 adam Exp $
+ */
+
+/**
+ * \addtogroup pt
+ * @{
+ */
+
+/**
+ * \file
+ * Protothreads implementation.
+ * \author
+ * Adam Dunkels <adam@sics.se>
+ *
+ */
+
+#ifndef __PT_H__
+#define __PT_H__
+
+#include "lc.h"
+
+struct pt {
+ lc_t lc;
+};
+
+#define PT_WAITING 0
+#define PT_EXITED 1
+#define PT_ENDED 2
+#define PT_YIELDED 3
+
+/**
+ * \name Initialization
+ * @{
+ */
+
+/**
+ * Initialize a protothread.
+ *
+ * Initializes a protothread. Initialization must be done prior to
+ * starting to execute the protothread.
+ *
+ * \param pt A pointer to the protothread control structure.
+ *
+ * \sa PT_SPAWN()
+ *
+ * \hideinitializer
+ */
+#define PT_INIT(pt) LC_INIT((pt)->lc)
+
+/** @} */
+
+/**
+ * \name Declaration and definition
+ * @{
+ */
+
+/**
+ * Declaration of a protothread.
+ *
+ * This macro is used to declare a protothread. All protothreads must
+ * be declared with this macro.
+ *
+ * \param name_args The name and arguments of the C function
+ * implementing the protothread.
+ *
+ * \hideinitializer
+ */
+#define PT_THREAD(name_args) char name_args
+
+/**
+ * Declare the start of a protothread inside the C function
+ * implementing the protothread.
+ *
+ * This macro is used to declare the starting point of a
+ * protothread. It should be placed at the start of the function in
+ * which the protothread runs. All C statements above the PT_BEGIN()
+ * invokation will be executed each time the protothread is scheduled.
+ *
+ * \param pt A pointer to the protothread control structure.
+ *
+ * \hideinitializer
+ */
+#define PT_BEGIN(pt) { char PT_YIELD_FLAG = 1; LC_RESUME((pt)->lc)
+
+/**
+ * Declare the end of a protothread.
+ *
+ * This macro is used for declaring that a protothread ends. It must
+ * always be used together with a matching PT_BEGIN() macro.
+ *
+ * \param pt A pointer to the protothread control structure.
+ *
+ * \hideinitializer
+ */
+#define PT_END(pt) LC_END((pt)->lc); PT_YIELD_FLAG = 0; \
+ PT_INIT(pt); return PT_ENDED; }
+
+/** @} */
+
+/**
+ * \name Blocked wait
+ * @{
+ */
+
+/**
+ * Block and wait until condition is true.
+ *
+ * This macro blocks the protothread until the specified condition is
+ * true.
+ *
+ * \param pt A pointer to the protothread control structure.
+ * \param condition The condition.
+ *
+ * \hideinitializer
+ */
+#define PT_WAIT_UNTIL(pt, condition) \
+ do { \
+ LC_SET((pt)->lc); \
+ if(!(condition)) { \
+ return PT_WAITING; \
+ } \
+ } while(0)
+
+/**
+ * Block and wait while condition is true.
+ *
+ * This function blocks and waits while condition is true. See
+ * PT_WAIT_UNTIL().
+ *
+ * \param pt A pointer to the protothread control structure.
+ * \param cond The condition.
+ *
+ * \hideinitializer
+ */
+#define PT_WAIT_WHILE(pt, cond) PT_WAIT_UNTIL((pt), !(cond))
+
+/** @} */
+
+/**
+ * \name Hierarchical protothreads
+ * @{
+ */
+
+/**
+ * Block and wait until a child protothread completes.
+ *
+ * This macro schedules a child protothread. The current protothread
+ * will block until the child protothread completes.
+ *
+ * \note The child protothread must be manually initialized with the
+ * PT_INIT() function before this function is used.
+ *
+ * \param pt A pointer to the protothread control structure.
+ * \param thread The child protothread with arguments
+ *
+ * \sa PT_SPAWN()
+ *
+ * \hideinitializer
+ */
+#define PT_WAIT_THREAD(pt, thread) PT_WAIT_WHILE((pt), PT_SCHEDULE(thread))
+
+/**
+ * Spawn a child protothread and wait until it exits.
+ *
+ * This macro spawns a child protothread and waits until it exits. The
+ * macro can only be used within a protothread.
+ *
+ * \param pt A pointer to the protothread control structure.
+ * \param child A pointer to the child protothread's control structure.
+ * \param thread The child protothread with arguments
+ *
+ * \hideinitializer
+ */
+#define PT_SPAWN(pt, child, thread) \
+ do { \
+ PT_INIT((child)); \
+ PT_WAIT_THREAD((pt), (thread)); \
+ } while(0)
+
+/** @} */
+
+/**
+ * \name Exiting and restarting
+ * @{
+ */
+
+/**
+ * Restart the protothread.
+ *
+ * This macro will block and cause the running protothread to restart
+ * its execution at the place of the PT_BEGIN() call.
+ *
+ * \param pt A pointer to the protothread control structure.
+ *
+ * \hideinitializer
+ */
+#define PT_RESTART(pt) \
+ do { \
+ PT_INIT(pt); \
+ return PT_WAITING; \
+ } while(0)
+
+/**
+ * Exit the protothread.
+ *
+ * This macro causes the protothread to exit. If the protothread was
+ * spawned by another protothread, the parent protothread will become
+ * unblocked and can continue to run.
+ *
+ * \param pt A pointer to the protothread control structure.
+ *
+ * \hideinitializer
+ */
+#define PT_EXIT(pt) \
+ do { \
+ PT_INIT(pt); \
+ return PT_EXITED; \
+ } while(0)
+
+/** @} */
+
+/**
+ * \name Calling a protothread
+ * @{
+ */
+
+/**
+ * Schedule a protothread.
+ *
+ * This function shedules a protothread. The return value of the
+ * function is non-zero if the protothread is running or zero if the
+ * protothread has exited.
+ *
+ * \param f The call to the C function implementing the protothread to
+ * be scheduled
+ *
+ * \hideinitializer
+ */
+#define PT_SCHEDULE(f) ((f) == PT_WAITING)
+
+/** @} */
+
+/**
+ * \name Yielding from a protothread
+ * @{
+ */
+
+/**
+ * Yield from the current protothread.
+ *
+ * This function will yield the protothread, thereby allowing other
+ * processing to take place in the system.
+ *
+ * \param pt A pointer to the protothread control structure.
+ *
+ * \hideinitializer
+ */
+#define PT_YIELD(pt) \
+ do { \
+ PT_YIELD_FLAG = 0; \
+ LC_SET((pt)->lc); \
+ if(PT_YIELD_FLAG == 0) { \
+ return PT_YIELDED; \
+ } \
+ } while(0)
+
+/**
+ * \brief Yield from the protothread until a condition occurs.
+ * \param pt A pointer to the protothread control structure.
+ * \param cond The condition.
+ *
+ * This function will yield the protothread, until the
+ * specified condition evaluates to true.
+ *
+ *
+ * \hideinitializer
+ */
+#define PT_YIELD_UNTIL(pt, cond) \
+ do { \
+ PT_YIELD_FLAG = 0; \
+ LC_SET((pt)->lc); \
+ if((PT_YIELD_FLAG == 0) || !(cond)) { \
+ return PT_YIELDED; \
+ } \
+ } while(0)
+
+/** @} */
+
+#endif /* __PT_H__ */
+
+/** @} */
diff --git a/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/uip.h b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/uip.h new file mode 100644 index 0000000..3a0ed19 --- /dev/null +++ b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/uip.h @@ -0,0 +1,2184 @@ +
+ /**
+ * \addtogroup uip
+ * @{
+ */
+
+/**
+ * \file
+ * Header file for the uIP TCP/IP stack.
+ * \author Adam Dunkels <adam@dunkels.com>
+ * \author Julien Abeille <jabeille@cisco.com> (IPv6 related code)
+ * \author Mathilde Durvy <mdurvy@cisco.com> (IPv6 related code)
+ *
+ * The uIP TCP/IP stack header file contains definitions for a number
+ * of C macros that are used by uIP programs as well as internal uIP
+ * structures, TCP/IP header structures and function declarations.
+ *
+ */
+
+/*
+ * Copyright (c) 2001-2003, Adam Dunkels.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote
+ * products derived from this software without specific prior
+ * written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * This file is part of the uIP TCP/IP stack.
+ *
+ * $Id: uip.h,v 1.24 2009/04/06 13:18:50 nvt-se Exp $
+ *
+ */
+#ifndef __UIP_H__
+#define __UIP_H__
+
+#include "net/uipopt.h"
+#include "uip-conf.h"
+
+/**
+ * Representation of an IP address.
+ *
+ */
+#if UIP_CONF_IPV6 != 0
+ typedef union uip_ip6addr_t
+ {
+ u8_t u8[16]; /* Initializer, must come first!!! */
+ u16_t u16[8];
+ } uip_ip6addr_t;
+
+ typedef uip_ip6addr_t uip_ipaddr_t;
+#else /* UIP_CONF_IPV6 */
+ #ifdef __CC_ARM
+ __packed /* The ARM compiler insists on this being packed, but with other compilers packing it generates a warning as it will be packed anyway. */
+ #endif
+
+ typedef union uip_ip4addr_t
+ {
+ u8_t u8[4]; /* Initializer, must come first!!! */
+ u16_t u16[2];
+ } uip_ip4addr_t;
+ typedef uip_ip4addr_t uip_ipaddr_t;
+#endif /* UIP_CONF_IPV6 */
+
+/*---------------------------------------------------------------------------*/
+
+/** \brief 16 bit 802.15.4 address */
+struct uip_802154_shortaddr
+{
+ u8_t addr[2];
+};
+
+/** \brief 64 bit 802.15.4 address */
+struct uip_802154_longaddr
+{
+ u8_t addr[8];
+};
+
+/** \brief 802.11 address */
+struct uip_80211_addr
+{
+ u8_t addr[6];
+};
+
+/** \brief 802.3 address */
+#include "net/pack_struct_start.h"
+struct uip_eth_addr
+{
+ u8_t addr[6];
+}
+#include "net/pack_struct_end.h"
+
+#ifdef UIP_CONF_LL_802154
+
+ /** \brief 802.15.4 address */
+ typedef struct uip_802154_longaddr uip_lladdr_t;
+ #define UIP_802154_SHORTADDR_LEN 2
+ #define UIP_802154_LONGADDR_LEN 8
+ #define UIP_LLADDR_LEN UIP_802154_LONGADDR_LEN
+#else /*UIP_CONF_LL_802154*/
+ #ifdef UIP_CONF_LL_80211
+ /** \brief 802.11 address */
+ typedef struct uip_80211_addr uip_lladdr_t;
+ #define UIP_LLADDR_LEN 6
+ #else /*UIP_CONF_LL_80211*/
+
+ /** \brief Ethernet address */
+ typedef struct uip_eth_addr uip_lladdr_t;
+
+ #define UIP_LLADDR_LEN 6
+ #endif /*UIP_CONF_LL_80211*/
+#endif /*UIP_CONF_LL_802154*/
+
+//_RB_#include "net/tcpip.h"
+
+/*---------------------------------------------------------------------------*/
+
+/* First, the functions that should be called from the
+ * system. Initialization, the periodic timer, and incoming packets are
+ * handled by the following three functions.
+ */
+
+/**
+ * \defgroup uipconffunc uIP configuration functions
+ * @{
+ *
+ * The uIP configuration functions are used for setting run-time
+ * parameters in uIP such as IP addresses.
+ */
+
+/**
+ * Set the IP address of this host.
+ *
+ * The IP address is represented as a 4-byte array where the first
+ * octet of the IP address is put in the first member of the 4-byte
+ * array.
+ *
+ * Example:
+ \code
+
+ uip_ipaddr_t addr;
+
+ uip_ipaddr(&addr, 192,168,1,2);
+ uip_sethostaddr(&addr);
+
+ \endcode
+ * \param addr A pointer to an IP address of type uip_ipaddr_t;
+ *
+ * \sa uip_ipaddr()
+ *
+ * \hideinitializer
+ */
+#define uip_sethostaddr( addr ) uip_ipaddr_copy( &uip_hostaddr, (addr) )
+
+/**
+ * Get the IP address of this host.
+ *
+ * The IP address is represented as a 4-byte array where the first
+ * octet of the IP address is put in the first member of the 4-byte
+ * array.
+ *
+ * Example:
+ \code
+ uip_ipaddr_t hostaddr;
+
+ uip_gethostaddr(&hostaddr);
+ \endcode
+ * \param addr A pointer to a uip_ipaddr_t variable that will be
+ * filled in with the currently configured IP address.
+ *
+ * \hideinitializer
+ */
+#define uip_gethostaddr( addr ) uip_ipaddr_copy( (addr), &uip_hostaddr )
+
+/**
+ * Set the default router's IP address.
+ *
+ * \param addr A pointer to a uip_ipaddr_t variable containing the IP
+ * address of the default router.
+ *
+ * \sa uip_ipaddr()
+ *
+ * \hideinitializer
+ */
+#define uip_setdraddr( addr ) uip_ipaddr_copy( &uip_draddr, (addr) )
+
+/**
+ * Set the netmask.
+ *
+ * \param addr A pointer to a uip_ipaddr_t variable containing the IP
+ * address of the netmask.
+ *
+ * \sa uip_ipaddr()
+ *
+ * \hideinitializer
+ */
+#define uip_setnetmask( addr ) uip_ipaddr_copy( &uip_netmask, (addr) )
+
+/**
+ * Get the default router's IP address.
+ *
+ * \param addr A pointer to a uip_ipaddr_t variable that will be
+ * filled in with the IP address of the default router.
+ *
+ * \hideinitializer
+ */
+#define uip_getdraddr( addr ) uip_ipaddr_copy( (addr), &uip_draddr )
+
+/**
+ * Get the netmask.
+ *
+ * \param addr A pointer to a uip_ipaddr_t variable that will be
+ * filled in with the value of the netmask.
+ *
+ * \hideinitializer
+ */
+#define uip_getnetmask( addr ) uip_ipaddr_copy( (addr), &uip_netmask )
+
+/** @} */
+
+/**
+ * \defgroup uipinit uIP initialization functions
+ * @{
+ *
+ * The uIP initialization functions are used for booting uIP.
+ */
+
+/**
+ * uIP initialization function.
+ *
+ * This function should be called at boot up to initilize the uIP
+ * TCP/IP stack.
+ */
+void uip_init( void );
+
+/**
+ * uIP initialization function.
+ *
+ * This function may be used at boot time to set the initial ip_id.
+ */
+void uip_setipid( u16_t id );
+
+/** @} */
+
+/**
+ * \defgroup uipdevfunc uIP device driver functions
+ * @{
+ *
+ * These functions are used by a network device driver for interacting
+ * with uIP.
+ */
+
+/**
+ * Process an incoming packet.
+ *
+ * This function should be called when the device driver has received
+ * a packet from the network. The packet from the device driver must
+ * be present in the uip_buf buffer, and the length of the packet
+ * should be placed in the uip_len variable.
+ *
+ * When the function returns, there may be an outbound packet placed
+ * in the uip_buf packet buffer. If so, the uip_len variable is set to
+ * the length of the packet. If no packet is to be sent out, the
+ * uip_len variable is set to 0.
+ *
+ * The usual way of calling the function is presented by the source
+ * code below.
+ \code
+ uip_len = devicedriver_poll();
+ if(uip_len > 0) {
+ uip_input();
+ if(uip_len > 0) {
+ devicedriver_send();
+ }
+ }
+ \endcode
+ *
+ * \note If you are writing a uIP device driver that needs ARP
+ * (Address Resolution Protocol), e.g., when running uIP over
+ * Ethernet, you will need to call the uIP ARP code before calling
+ * this function:
+ \code
+ #define BUF ((struct uip_eth_hdr *)&uip_buf[0])
+ uip_len = ethernet_devicedrver_poll();
+ if(uip_len > 0) {
+ if(BUF->type == HTONS(UIP_ETHTYPE_IP)) {
+ uip_arp_ipin();
+ uip_input();
+ if(uip_len > 0) {
+ uip_arp_out();
+ ethernet_devicedriver_send();
+ }
+ } else if(BUF->type == HTONS(UIP_ETHTYPE_ARP)) {
+ uip_arp_arpin();
+ if(uip_len > 0) {
+ ethernet_devicedriver_send();
+ }
+ }
+ \endcode
+ *
+ * \hideinitializer
+ */
+#define uip_input() uip_process( UIP_DATA )
+
+/**
+ * Periodic processing for a connection identified by its number.
+ *
+ * This function does the necessary periodic processing (timers,
+ * polling) for a uIP TCP conneciton, and should be called when the
+ * periodic uIP timer goes off. It should be called for every
+ * connection, regardless of whether they are open of closed.
+ *
+ * When the function returns, it may have an outbound packet waiting
+ * for service in the uIP packet buffer, and if so the uip_len
+ * variable is set to a value larger than zero. The device driver
+ * should be called to send out the packet.
+ *
+ * The usual way of calling the function is through a for() loop like
+ * this:
+ \code
+ for(i = 0; i < UIP_CONNS; ++i) {
+ uip_periodic(i);
+ if(uip_len > 0) {
+ devicedriver_send();
+ }
+ }
+ \endcode
+ *
+ * \note If you are writing a uIP device driver that needs ARP
+ * (Address Resolution Protocol), e.g., when running uIP over
+ * Ethernet, you will need to call the uip_arp_out() function before
+ * calling the device driver:
+ \code
+ for(i = 0; i < UIP_CONNS; ++i) {
+ uip_periodic(i);
+ if(uip_len > 0) {
+ uip_arp_out();
+ ethernet_devicedriver_send();
+ }
+ }
+ \endcode
+ *
+ * \param conn The number of the connection which is to be periodically polled.
+ *
+ * \hideinitializer
+ */
+#ifdef UIP_TCP
+#define uip_periodic( conn ) \
+ do \
+ { \
+ uip_conn = &uip_conns[conn]; \
+ uip_process( UIP_TIMER ); \
+ } while( 0 )
+
+/**
+ *
+ *
+ */
+#define uip_conn_active( conn ) ( uip_conns[conn].tcpstateflags != UIP_CLOSED )
+
+/**
+ * Perform periodic processing for a connection identified by a pointer
+ * to its structure.
+ *
+ * Same as uip_periodic() but takes a pointer to the actual uip_conn
+ * struct instead of an integer as its argument. This function can be
+ * used to force periodic processing of a specific connection.
+ *
+ * \param conn A pointer to the uip_conn struct for the connection to
+ * be processed.
+ *
+ * \hideinitializer
+ */
+#define uip_periodic_conn( conn ) \
+ do \
+ { \
+ uip_conn = conn; \
+ uip_process( UIP_TIMER ); \
+ } while( 0 )
+
+/**
+ * Request that a particular connection should be polled.
+ *
+ * Similar to uip_periodic_conn() but does not perform any timer
+ * processing. The application is polled for new data.
+ *
+ * \param conn A pointer to the uip_conn struct for the connection to
+ * be processed.
+ *
+ * \hideinitializer
+ */
+#define uip_poll_conn( conn ) \
+ do \
+ { \
+ uip_conn = conn; \
+ uip_process( UIP_POLL_REQUEST ); \
+ } while( 0 )
+#endif /* UIP_TCP */
+
+#ifdef UIP_UDP
+
+/**
+ * Periodic processing for a UDP connection identified by its number.
+ *
+ * This function is essentially the same as uip_periodic(), but for
+ * UDP connections. It is called in a similar fashion as the
+ * uip_periodic() function:
+ \code
+ for(i = 0; i < UIP_UDP_CONNS; i++) {
+ uip_udp_periodic(i);
+ if(uip_len > 0) {
+ devicedriver_send();
+ }
+ }
+ \endcode
+ *
+ * \note As for the uip_periodic() function, special care has to be
+ * taken when using uIP together with ARP and Ethernet:
+ \code
+ for(i = 0; i < UIP_UDP_CONNS; i++) {
+ uip_udp_periodic(i);
+ if(uip_len > 0) {
+ uip_arp_out();
+ ethernet_devicedriver_send();
+ }
+ }
+ \endcode
+ *
+ * \param conn The number of the UDP connection to be processed.
+ *
+ * \hideinitializer
+ */
+#define uip_udp_periodic( conn ) \
+ do \
+ { \
+ uip_udp_conn = &uip_udp_conns[conn]; \
+ uip_process( UIP_UDP_TIMER ); \
+ } while( 0 )
+
+/**
+ * Periodic processing for a UDP connection identified by a pointer to
+ * its structure.
+ *
+ * Same as uip_udp_periodic() but takes a pointer to the actual
+ * uip_conn struct instead of an integer as its argument. This
+ * function can be used to force periodic processing of a specific
+ * connection.
+ *
+ * \param conn A pointer to the uip_udp_conn struct for the connection
+ * to be processed.
+ *
+ * \hideinitializer
+ */
+#define uip_udp_periodic_conn( conn ) \
+ do \
+ { \
+ uip_udp_conn = conn; \
+ uip_process( UIP_UDP_TIMER ); \
+ } while( 0 )
+#endif /* UIP_UDP */
+
+ /** \brief Abandon the reassembly of the current packet */
+ void uip_reass_over( void );
+
+/**
+ * The uIP packet buffer.
+ *
+ * The uip_buf array is used to hold incoming and outgoing
+ * packets. The device driver should place incoming data into this
+ * buffer. When sending data, the device driver should read the link
+ * level headers and the TCP/IP headers from this buffer. The size of
+ * the link level headers is configured by the UIP_LLH_LEN define.
+ *
+ * \note The application data need not be placed in this buffer, so
+ * the device driver must read it from the place pointed to by the
+ * uip_appdata pointer as illustrated by the following example:
+ \code
+ void
+ devicedriver_send(void)
+ {
+ hwsend(&uip_buf[0], UIP_LLH_LEN);
+ if(uip_len <= UIP_LLH_LEN + UIP_TCPIP_HLEN) {
+ hwsend(&uip_buf[UIP_LLH_LEN], uip_len - UIP_LLH_LEN);
+ } else {
+ hwsend(&uip_buf[UIP_LLH_LEN], UIP_TCPIP_HLEN);
+ hwsend(uip_appdata, uip_len - UIP_TCPIP_HLEN - UIP_LLH_LEN);
+ }
+ }
+ \endcode
+*/
+#ifndef UIP_CONF_EXTERNAL_BUFFER
+CCIF extern u8_t uip_buf[UIP_BUFSIZE + 2];
+#else
+CCIF extern unsigned char *uip_buf;
+#endif
+
+/** @} */
+
+/*---------------------------------------------------------------------------*/
+
+/* Functions that are used by the uIP application program. Opening and
+ * closing connections, sending and receiving data, etc. is all
+ * handled by the functions below.
+ */
+
+/**
+ * \defgroup uipappfunc uIP application functions
+ * @{
+ *
+ * Functions used by an application running of top of uIP.
+ */
+
+/**
+ * Start listening to the specified port.
+ *
+ * \note Since this function expects the port number in network byte
+ * order, a conversion using HTONS() or htons() is necessary.
+ *
+ \code
+ uip_listen(HTONS(80));
+ \endcode
+ *
+ * \param port A 16-bit port number in network byte order.
+ */
+void uip_listen( u16_t port );
+
+/**
+ * Stop listening to the specified port.
+ *
+ * \note Since this function expects the port number in network byte
+ * order, a conversion using HTONS() or htons() is necessary.
+ *
+ \code
+ uip_unlisten(HTONS(80));
+ \endcode
+ *
+ * \param port A 16-bit port number in network byte order.
+ */
+void uip_unlisten( u16_t port );
+
+/**
+ * Connect to a remote host using TCP.
+ *
+ * This function is used to start a new connection to the specified
+ * port on the specified host. It allocates a new connection identifier,
+ * sets the connection to the SYN_SENT state and sets the
+ * retransmission timer to 0. This will cause a TCP SYN segment to be
+ * sent out the next time this connection is periodically processed,
+ * which usually is done within 0.5 seconds after the call to
+ * uip_connect().
+ *
+ * \note This function is available only if support for active open
+ * has been configured by defining UIP_ACTIVE_OPEN to 1 in uipopt.h.
+ *
+ * \note Since this function requires the port number to be in network
+ * byte order, a conversion using HTONS() or htons() is necessary.
+ *
+ \code
+ uip_ipaddr_t ipaddr;
+
+ uip_ipaddr(&ipaddr, 192,168,1,2);
+ uip_connect(&ipaddr, HTONS(80));
+ \endcode
+ *
+ * \param ripaddr The IP address of the remote host.
+ *
+ * \param port A 16-bit port number in network byte order.
+ *
+ * \return A pointer to the uIP connection identifier for the new connection,
+ * or NULL if no connection could be allocated.
+ *
+ */
+struct uip_conn *uip_connect( uip_ipaddr_t *ripaddr, u16_t port );
+
+/**
+ * \internal
+ *
+ * Check if a connection has outstanding (i.e., unacknowledged) data.
+ *
+ * \param conn A pointer to the uip_conn structure for the connection.
+ *
+ * \hideinitializer
+ */
+#define uip_outstanding( conn ) ( (conn)->len )
+
+/**
+ * Send data on the current connection.
+ *
+ * This function is used to send out a single segment of TCP
+ * data. Only applications that have been invoked by uIP for event
+ * processing can send data.
+ *
+ * The amount of data that actually is sent out after a call to this
+ * function is determined by the maximum amount of data TCP allows. uIP
+ * will automatically crop the data so that only the appropriate
+ * amount of data is sent. The function uip_mss() can be used to query
+ * uIP for the amount of data that actually will be sent.
+ *
+ * \note This function does not guarantee that the sent data will
+ * arrive at the destination. If the data is lost in the network, the
+ * application will be invoked with the uip_rexmit() event being
+ * set. The application will then have to resend the data using this
+ * function.
+ *
+ * \param data A pointer to the data which is to be sent.
+ *
+ * \param len The maximum amount of data bytes to be sent.
+ *
+ * \hideinitializer
+ */
+CCIF void uip_send( const void *data, int len );
+
+/**
+ * The length of any incoming data that is currently available (if available)
+ * in the uip_appdata buffer.
+ *
+ * The test function uip_data() must first be used to check if there
+ * is any data available at all.
+ *
+ * \hideinitializer
+ */
+
+/*void uip_datalen(void);*/
+#define uip_datalen() uip_len
+
+/**
+ * The length of any out-of-band data (urgent data) that has arrived
+ * on the connection.
+ *
+ * \note The configuration parameter UIP_URGDATA must be set for this
+ * function to be enabled.
+ *
+ * \hideinitializer
+ */
+#define uip_urgdatalen() uip_urglen
+
+/**
+ * Close the current connection.
+ *
+ * This function will close the current connection in a nice way.
+ *
+ * \hideinitializer
+ */
+#define uip_close() ( uip_flags = UIP_CLOSE )
+
+/**
+ * Abort the current connection.
+ *
+ * This function will abort (reset) the current connection, and is
+ * usually used when an error has occurred that prevents using the
+ * uip_close() function.
+ *
+ * \hideinitializer
+ */
+#define uip_abort() ( uip_flags = UIP_ABORT )
+
+/**
+ * Tell the sending host to stop sending data.
+ *
+ * This function will close our receiver's window so that we stop
+ * receiving data for the current connection.
+ *
+ * \hideinitializer
+ */
+#define uip_stop() ( uip_conn->tcpstateflags |= UIP_STOPPED )
+
+/**
+ * Find out if the current connection has been previously stopped with
+ * uip_stop().
+ *
+ * \hideinitializer
+ */
+#define uip_stopped( conn ) ( (conn)->tcpstateflags & UIP_STOPPED )
+
+/**
+ * Restart the current connection, if is has previously been stopped
+ * with uip_stop().
+ *
+ * This function will open the receiver's window again so that we
+ * start receiving data for the current connection.
+ *
+ * \hideinitializer
+ */
+#define uip_restart() \
+ do \
+ { \
+ uip_flags |= UIP_NEWDATA; \
+ uip_conn->tcpstateflags &= ~UIP_STOPPED; \
+ } while( 0 )
+
+ /* uIP tests that can be made to determine in what state the current
+ connection is, and what the application function should do. */
+
+/**
+ * Is the current connection a UDP connection?
+ *
+ * This function checks whether the current connection is a UDP connection.
+ *
+ * \hideinitializer
+ *
+ */
+#define uip_udpconnection() ( uip_conn == NULL )
+
+/**
+ * Is new incoming data available?
+ *
+ * Will reduce to non-zero if there is new data for the application
+ * present at the uip_appdata pointer. The size of the data is
+ * available through the uip_len variable.
+ *
+ * \hideinitializer
+ */
+#define uip_newdata() ( uip_flags & UIP_NEWDATA )
+
+/**
+ * Has previously sent data been acknowledged?
+ *
+ * Will reduce to non-zero if the previously sent data has been
+ * acknowledged by the remote host. This means that the application
+ * can send new data.
+ *
+ * \hideinitializer
+ */
+#define uip_acked() ( uip_flags & UIP_ACKDATA )
+
+/**
+ * Has the connection just been connected?
+ *
+ * Reduces to non-zero if the current connection has been connected to
+ * a remote host. This will happen both if the connection has been
+ * actively opened (with uip_connect()) or passively opened (with
+ * uip_listen()).
+ *
+ * \hideinitializer
+ */
+#define uip_connected() ( uip_flags & UIP_CONNECTED )
+
+/**
+ * Has the connection been closed by the other end?
+ *
+ * Is non-zero if the connection has been closed by the remote
+ * host. The application may then do the necessary clean-ups.
+ *
+ * \hideinitializer
+ */
+#define uip_closed() ( uip_flags & UIP_CLOSE )
+
+/**
+ * Has the connection been aborted by the other end?
+ *
+ * Non-zero if the current connection has been aborted (reset) by the
+ * remote host.
+ *
+ * \hideinitializer
+ */
+#define uip_aborted() ( uip_flags & UIP_ABORT )
+
+/**
+ * Has the connection timed out?
+ *
+ * Non-zero if the current connection has been aborted due to too many
+ * retransmissions.
+ *
+ * \hideinitializer
+ */
+#define uip_timedout() ( uip_flags & UIP_TIMEDOUT )
+
+/**
+ * Do we need to retransmit previously data?
+ *
+ * Reduces to non-zero if the previously sent data has been lost in
+ * the network, and the application should retransmit it. The
+ * application should send the exact same data as it did the last
+ * time, using the uip_send() function.
+ *
+ * \hideinitializer
+ */
+#define uip_rexmit() ( uip_flags & UIP_REXMIT )
+
+/**
+ * Is the connection being polled by uIP?
+ *
+ * Is non-zero if the reason the application is invoked is that the
+ * current connection has been idle for a while and should be
+ * polled.
+ *
+ * The polling event can be used for sending data without having to
+ * wait for the remote host to send data.
+ *
+ * \hideinitializer
+ */
+#define uip_poll() ( uip_flags & UIP_POLL )
+
+/**
+ * Get the initial maximum segment size (MSS) of the current
+ * connection.
+ *
+ * \hideinitializer
+ */
+#define uip_initialmss() ( uip_conn->initialmss )
+
+/**
+ * Get the current maximum segment size that can be sent on the current
+ * connection.
+ *
+ * The current maximum segment size that can be sent on the
+ * connection is computed from the receiver's window and the MSS of
+ * the connection (which also is available by calling
+ * uip_initialmss()).
+ *
+ * \hideinitializer
+ */
+#define uip_mss() ( uip_conn->mss )
+ /**
+ * Set up a new UDP connection.
+ *
+ * This function sets up a new UDP connection. The function will
+ * automatically allocate an unused local port for the new
+ * connection. However, another port can be chosen by using the
+ * uip_udp_bind() call, after the uip_udp_new() function has been
+ * called.
+ *
+ * Example:
+ \code
+ uip_ipaddr_t addr;
+ struct uip_udp_conn *c;
+
+ uip_ipaddr(&addr, 192,168,2,1);
+ c = uip_udp_new(&addr, HTONS(12345));
+ if(c != NULL) {
+ uip_udp_bind(c, HTONS(12344));
+ }
+ \endcode
+ * \param ripaddr The IP address of the remote host.
+ *
+ * \param rport The remote port number in network byte order.
+ *
+ * \return The uip_udp_conn structure for the new connection or NULL
+ * if no connection could be allocated.
+ */
+ struct uip_udp_conn *uip_udp_new( const uip_ipaddr_t *ripaddr, u16_t rport );
+
+/**
+ * Removed a UDP connection.
+ *
+ * \param conn A pointer to the uip_udp_conn structure for the connection.
+ *
+ * \hideinitializer
+ */
+#define uip_udp_remove( conn ) ( conn )->lport = 0
+
+/**
+ * Bind a UDP connection to a local port.
+ *
+ * \param conn A pointer to the uip_udp_conn structure for the
+ * connection.
+ *
+ * \param port The local port number, in network byte order.
+ *
+ * \hideinitializer
+ */
+#define uip_udp_bind( conn, port ) ( conn )->lport = port
+
+/**
+ * Send a UDP datagram of length len on the current connection.
+ *
+ * This function can only be called in response to a UDP event (poll
+ * or newdata). The data must be present in the uip_buf buffer, at the
+ * place pointed to by the uip_appdata pointer.
+ *
+ * \param len The length of the data in the uip_buf buffer.
+ *
+ * \hideinitializer
+ */
+#define uip_udp_send( len ) uip_send( ( char * ) uip_appdata, len )
+
+/** @} */
+
+/* uIP convenience and converting functions. */
+
+/**
+ * \defgroup uipconvfunc uIP conversion functions
+ * @{
+ *
+ * These functions can be used for converting between different data
+ * formats used by uIP.
+ */
+
+/**
+ * Convert an IP address to four bytes separated by commas.
+ *
+ * Example:
+ \code
+ uip_ipaddr_t ipaddr;
+ printf("ipaddr=%d.%d.%d.%d\n", uip_ipaddr_to_quad(&ipaddr));
+ \endcode
+ *
+ * \param a A pointer to a uip_ipaddr_t.
+ * \hideinitializer
+ */
+#define uip_ipaddr_to_quad( a ) ( a )->u8[0], ( a )->u8[1], ( a )->u8[2], ( a )->u8[3]
+
+/**
+ * Construct an IP address from four bytes.
+ *
+ * This function constructs an IP address of the type that uIP handles
+ * internally from four bytes. The function is handy for specifying IP
+ * addresses to use with e.g. the uip_connect() function.
+ *
+ * Example:
+ \code
+ uip_ipaddr_t ipaddr;
+ struct uip_conn *c;
+
+ uip_ipaddr(&ipaddr, 192,168,1,2);
+ c = uip_connect(&ipaddr, HTONS(80));
+ \endcode
+ *
+ * \param addr A pointer to a uip_ipaddr_t variable that will be
+ * filled in with the IP address.
+ *
+ * \param addr0 The first octet of the IP address.
+ * \param addr1 The second octet of the IP address.
+ * \param addr2 The third octet of the IP address.
+ * \param addr3 The forth octet of the IP address.
+ *
+ * \hideinitializer
+ */
+#define uip_ipaddr( addr, addr0, addr1, addr2, addr3 ) \
+ do \
+ { \
+ ( addr )->u8[0] = addr0; \
+ ( addr )->u8[1] = addr1; \
+ ( addr )->u8[2] = addr2; \
+ ( addr )->u8[3] = addr3; \
+ } while( 0 )
+
+/**
+ * Construct an IPv6 address from eight 16-bit words.
+ *
+ * This function constructs an IPv6 address.
+ *
+ * \hideinitializer
+ */
+#define uip_ip6addr( addr, addr0, addr1, addr2, addr3, addr4, addr5, addr6, addr7 ) \
+ do \
+ { \
+ ( addr )->u16[0] = HTONS( addr0 ); \
+ ( addr )->u16[1] = HTONS( addr1 ); \
+ ( addr )->u16[2] = HTONS( addr2 ); \
+ ( addr )->u16[3] = HTONS( addr3 ); \
+ ( addr )->u16[4] = HTONS( addr4 ); \
+ ( addr )->u16[5] = HTONS( addr5 ); \
+ ( addr )->u16[6] = HTONS( addr6 ); \
+ ( addr )->u16[7] = HTONS( addr7 ); \
+ } while( 0 ) /**
+ * Construct an IPv6 address from eight 8-bit words.
+ *
+ * This function constructs an IPv6 address.
+ *
+ * \hideinitializer
+ */
+#define uip_ip6addr_u8 ( addr, addr0, addr1, addr2, addr3, addr4, addr5, addr6, addr7, addr8, addr9, addr10, addr11, addr12, addr13, addr14, \
+ addr15 ) do \
+ {\
+ ( addr )->u8[0] = addr0; \
+ ( addr )->u8[1] = addr1; \
+ ( addr )->u8[2] = addr2; \
+ ( addr )->u8[3] = addr3; \
+ ( addr )->u8[4] = addr4; \
+ ( addr )->u8[5] = addr5; \
+ ( addr )->u8[6] = addr6; \
+ ( addr )->u8[7] = addr7; \
+ ( addr )->u8[8] = addr8; \
+ ( addr )->u8[9] = addr9; \
+ ( addr )->u8[10] = addr10; \
+ ( addr )->u8[11] = addr11; \
+ ( addr )->u8[12] = addr12; \
+ ( addr )->u8[13] = addr13; \
+ ( addr )->u8[14] = addr14; \
+ ( addr )->u8[15] = addr15; \
+ } while( 0 )
+ /**
+ * Copy an IP address to another IP address.
+ *
+ * Copies an IP address from one place to another.
+ *
+ * Example:
+ \code
+ uip_ipaddr_t ipaddr1, ipaddr2;
+
+ uip_ipaddr(&ipaddr1, 192,16,1,2);
+ uip_ipaddr_copy(&ipaddr2, &ipaddr1);
+ \endcode
+ *
+ * \param dest The destination for the copy.
+ * \param src The source from where to copy.
+ *
+ * \hideinitializer
+ */
+#ifndef uip_ipaddr_copy
+ #define uip_ipaddr_copy( dest, src ) \
+ do \
+ { \
+ (dest)->u8[0] = (src)->u8[0]; \
+ (dest)->u8[1] = (src)->u8[1]; \
+ (dest)->u8[2] = (src)->u8[2]; \
+ (dest)->u8[3] = (src)->u8[3]; \
+ } while( 0 )
+#endif
+
+ /**
+ * Compare two IP addresses
+ *
+ * Compares two IP addresses.
+ *
+ * Example:
+ \code
+ uip_ipaddr_t ipaddr1, ipaddr2;
+
+ uip_ipaddr(&ipaddr1, 192,16,1,2);
+ if(uip_ipaddr_cmp(&ipaddr2, &ipaddr1)) {
+ printf("They are the same");
+ }
+ \endcode
+ *
+ * \param addr1 The first IP address.
+ * \param addr2 The second IP address.
+ *
+ * \hideinitializer
+ */
+#if !UIP_CONF_IPV6
+#define uip_ipaddr_cmp( addr1, addr2 ) ( (addr1)->u16[0] == (addr2)->u16[0] && (addr1)->u16[1] == (addr2)->u16[1] )
+#else /* !UIP_CONF_IPV6 */
+#define uip_ipaddr_cmp( addr1, addr2 ) ( memcmp(addr1, addr2, sizeof(uip_ip6addr_t)) == 0 )
+#endif /* !UIP_CONF_IPV6 */
+
+ /**
+ * Compare two IP addresses with netmasks
+ *
+ * Compares two IP addresses with netmasks. The masks are used to mask
+ * out the bits that are to be compared.
+ *
+ * Example:
+ \code
+ uip_ipaddr_t ipaddr1, ipaddr2, mask;
+
+ uip_ipaddr(&mask, 255,255,255,0);
+ uip_ipaddr(&ipaddr1, 192,16,1,2);
+ uip_ipaddr(&ipaddr2, 192,16,1,3);
+ if(uip_ipaddr_maskcmp(&ipaddr1, &ipaddr2, &mask)) {
+ printf("They are the same");
+ }
+ \endcode
+ *
+ * \param addr1 The first IP address.
+ * \param addr2 The second IP address.
+ * \param mask The netmask.
+ *
+ * \hideinitializer
+ */
+#if !UIP_CONF_IPV6
+#define uip_ipaddr_maskcmp( addr1, addr2, mask ) \
+ ( \
+ (((( u16_t * ) addr1)[0] & (( u16_t * ) mask)[0]) == ((( u16_t * ) addr2)[0] & (( u16_t * ) mask)[0])) && \
+ (((( u16_t * ) addr1)[1] & (( u16_t * ) mask)[1]) == ((( u16_t * ) addr2)[1] & (( u16_t * ) mask)[1])) \
+ )
+#else
+#define uip_ipaddr_prefixcmp( addr1, addr2, length ) ( memcmp(addr1, addr2, length >> 3) == 0 )
+#endif
+
+ /**
+ * Check if an address is a broadcast address for a network.
+ *
+ * Checks if an address is the broadcast address for a network. The
+ * network is defined by an IP address that is on the network and the
+ * network's netmask.
+ *
+ * \param addr The IP address.
+ * \param netaddr The network's IP address.
+ * \param netmask The network's netmask.
+ *
+ * \hideinitializer
+ */
+
+ /*#define uip_ipaddr_isbroadcast(addr, netaddr, netmask)
+ ((uip_ipaddr_t *)(addr)).u16 & ((uip_ipaddr_t *)(addr)).u16*/
+
+/**
+ * Mask out the network part of an IP address.
+ *
+ * Masks out the network part of an IP address, given the address and
+ * the netmask.
+ *
+ * Example:
+ \code
+ uip_ipaddr_t ipaddr1, ipaddr2, netmask;
+
+ uip_ipaddr(&ipaddr1, 192,16,1,2);
+ uip_ipaddr(&netmask, 255,255,255,0);
+ uip_ipaddr_mask(&ipaddr2, &ipaddr1, &netmask);
+ \endcode
+ *
+ * In the example above, the variable "ipaddr2" will contain the IP
+ * address 192.168.1.0.
+ *
+ * \param dest Where the result is to be placed.
+ * \param src The IP address.
+ * \param mask The netmask.
+ *
+ * \hideinitializer
+ */
+#define uip_ipaddr_mask( dest, src, mask ) \
+ do \
+ { \
+ ( ( u16_t * ) dest )[0] = ( ( u16_t * ) src )[0] & ( ( u16_t * ) mask )[0]; \
+ ( ( u16_t * ) dest )[1] = ( ( u16_t * ) src )[1] & ( ( u16_t * ) mask )[1]; \
+ } while( 0 )
+
+/**
+ * Pick the first octet of an IP address.
+ *
+ * Picks out the first octet of an IP address.
+ *
+ * Example:
+ \code
+ uip_ipaddr_t ipaddr;
+ u8_t octet;
+
+ uip_ipaddr(&ipaddr, 1,2,3,4);
+ octet = uip_ipaddr1(&ipaddr);
+ \endcode
+ *
+ * In the example above, the variable "octet" will contain the value 1.
+ *
+ * \hideinitializer
+ */
+#define uip_ipaddr1( addr ) ( (addr)->u8[0] )
+
+/**
+ * Pick the second octet of an IP address.
+ *
+ * Picks out the second octet of an IP address.
+ *
+ * Example:
+ \code
+ uip_ipaddr_t ipaddr;
+ u8_t octet;
+
+ uip_ipaddr(&ipaddr, 1,2,3,4);
+ octet = uip_ipaddr2(&ipaddr);
+ \endcode
+ *
+ * In the example above, the variable "octet" will contain the value 2.
+ *
+ * \hideinitializer
+ */
+#define uip_ipaddr2( addr ) ( (addr)->u8[1] )
+
+/**
+ * Pick the third octet of an IP address.
+ *
+ * Picks out the third octet of an IP address.
+ *
+ * Example:
+ \code
+ uip_ipaddr_t ipaddr;
+ u8_t octet;
+
+ uip_ipaddr(&ipaddr, 1,2,3,4);
+ octet = uip_ipaddr3(&ipaddr);
+ \endcode
+ *
+ * In the example above, the variable "octet" will contain the value 3.
+ *
+ * \hideinitializer
+ */
+#define uip_ipaddr3( addr ) ( (addr)->u8[2] )
+
+/**
+ * Pick the fourth octet of an IP address.
+ *
+ * Picks out the fourth octet of an IP address.
+ *
+ * Example:
+ \code
+ uip_ipaddr_t ipaddr;
+ u8_t octet;
+
+ uip_ipaddr(&ipaddr, 1,2,3,4);
+ octet = uip_ipaddr4(&ipaddr);
+ \endcode
+ *
+ * In the example above, the variable "octet" will contain the value 4.
+ *
+ * \hideinitializer
+ */
+#define uip_ipaddr4( addr ) ( (addr)->u8[3] )
+ /**
+ * Convert 16-bit quantity from host byte order to network byte order.
+ *
+ * This macro is primarily used for converting constants from host
+ * byte order to network byte order. For converting variables to
+ * network byte order, use the htons() function instead.
+ *
+ * \hideinitializer
+ */
+#ifndef HTONS
+#if UIP_BYTE_ORDER == UIP_BIG_ENDIAN
+#define HTONS( n ) ( n )
+#define HTONL( n ) ( n )
+#else /* UIP_BYTE_ORDER == UIP_BIG_ENDIAN */
+#define HTONS( n ) ( u16_t ) ( (((u16_t) (n)) << 8) | (((u16_t) (n)) >> 8) )
+#define HTONL( n ) ( ((u32_t) HTONS(n) << 16) | HTONS((u32_t) (n) >> 16) )
+#endif /* UIP_BYTE_ORDER == UIP_BIG_ENDIAN */
+#else
+#error "HTONS already defined!"
+#endif /* HTONS */
+
+ /**
+ * Convert 16-bit quantity from host byte order to network byte order.
+ *
+ * This function is primarily used for converting variables from host
+ * byte order to network byte order. For converting constants to
+ * network byte order, use the HTONS() macro instead.
+ */
+#ifndef htons
+ CCIF u16_t htons( u16_t val );
+#endif /* htons */
+
+#ifndef ntohs
+ #define ntohs htons
+#endif
+
+#ifndef htonl
+ CCIF u32_t htonl( u32_t val );
+#endif /* htonl */
+
+#ifndef ntohl
+ #define ntohl htonl
+#endif
+
+/** @} */
+
+/**
+ * Pointer to the application data in the packet buffer.
+ *
+ * This pointer points to the application data when the application is
+ * called. If the application wishes to send data, the application may
+ * use this space to write the data into before calling uip_send().
+ */
+CCIF extern void *uip_appdata;
+
+#if UIP_URGDATA > 0
+
+/* u8_t *uip_urgdata:
+ *
+ * This pointer points to any urgent data that has been received. Only
+ * present if compiled with support for urgent data (UIP_URGDATA).
+ */
+extern void *uip_urgdata;
+#endif /* UIP_URGDATA > 0 */
+
+/**
+ * \defgroup uipdrivervars Variables used in uIP device drivers
+ * @{
+ *
+ * uIP has a few global variables that are used in device drivers for
+ * uIP.
+ */
+
+/**
+ * The length of the packet in the uip_buf buffer.
+ *
+ * The global variable uip_len holds the length of the packet in the
+ * uip_buf buffer.
+ *
+ * When the network device driver calls the uIP input function,
+ * uip_len should be set to the length of the packet in the uip_buf
+ * buffer.
+ *
+ * When sending packets, the device driver should use the contents of
+ * the uip_len variable to determine the length of the outgoing
+ * packet.
+ *
+ */
+CCIF extern u16_t uip_len;
+
+/**
+ * The length of the extension headers
+ */
+extern u8_t uip_ext_len;
+
+/** @} */
+#if UIP_URGDATA > 0
+extern u16_t uip_urglen, uip_surglen;
+#endif /* UIP_URGDATA > 0 */
+
+/**
+ * Representation of a uIP TCP connection.
+ *
+ * The uip_conn structure is used for identifying a connection. All
+ * but one field in the structure are to be considered read-only by an
+ * application. The only exception is the appstate field whose purpose
+ * is to let the application store application-specific state (e.g.,
+ * file pointers) for the connection. The type of this field is
+ * configured in the "uipopt.h" header file.
+ */
+struct uip_conn
+{
+ uip_ipaddr_t ripaddr; /**< The IP address of the remote host. */
+
+ u16_t lport; /**< The local TCP port, in network byte order. */
+ u16_t rport; /**< The local remote TCP port, in network byte
+ order. */
+
+ u8_t rcv_nxt[4]; /**< The sequence number that we expect to
+ receive next. */
+ u8_t snd_nxt[4]; /**< The sequence number that was last sent by
+ us. */
+ u16_t len; /**< Length of the data that was previously sent. */
+ u16_t mss; /**< Current maximum segment size for the
+ connection. */
+ u16_t initialmss; /**< Initial maximum segment size for the
+ connection. */
+ u8_t sa; /**< Retransmission time-out calculation state
+ variable. */
+ u8_t sv; /**< Retransmission time-out calculation state
+ variable. */
+ u8_t rto; /**< Retransmission time-out. */
+ u8_t tcpstateflags; /**< TCP state and flags. */
+ u8_t timer; /**< The retransmission timer. */
+ u8_t nrtx; /**< The number of retransmissions for the last
+ segment sent. */
+
+ /** The application state. */
+ uip_tcp_appstate_t appstate;
+};
+
+/**
+ * Pointer to the current TCP connection.
+ *
+ * The uip_conn pointer can be used to access the current TCP
+ * connection.
+ */
+CCIF extern struct uip_conn *uip_conn;
+#ifdef UIP_TCP
+
+/* The array containing all uIP connections. */
+CCIF extern struct uip_conn uip_conns[UIP_CONNS];
+#endif
+
+/**
+ * \addtogroup uiparch
+ * @{
+ */
+
+/**
+ * 4-byte array used for the 32-bit sequence number calculations.
+ */
+extern u8_t uip_acc32[4];
+
+/** @} */
+#if UIP_UDP == 1
+/**
+ * Representation of a uIP UDP connection.
+ */
+struct uip_udp_conn
+{
+ uip_ipaddr_t ripaddr; /**< The IP address of the remote peer. */
+ u16_t lport; /**< The local port number in network byte order. */
+ u16_t rport; /**< The remote port number in network byte order. */
+ u8_t ttl; /**< Default time-to-live. */
+
+ /** The application state. */
+ uip_udp_appstate_t appstate;
+};
+
+/**
+ * The current UDP connection.
+ */
+extern struct uip_udp_conn *uip_udp_conn;
+extern struct uip_udp_conn uip_udp_conns[UIP_UDP_CONNS];
+#endif /* UIP_UDP */
+
+struct uip_router
+{
+ int ( *activate ) ( void );
+ int ( *deactivate ) ( void );
+ uip_ipaddr_t * ( *lookup ) ( uip_ipaddr_t *destipaddr, uip_ipaddr_t *nexthop );
+};
+
+#ifdef UIP_CONF_ROUTER
+extern const struct uip_router *uip_router;
+
+/**
+ * uIP routing driver registration function.
+ */
+void uip_router_register( const struct uip_router *router );
+#endif /*UIP_CONF_ROUTER*/
+
+#ifdef UIP_CONF_ICMP6
+struct uip_icmp6_conn
+{
+ uip_icmp6_appstate_t appstate;
+};
+extern struct uip_icmp6_conn uip_icmp6_conns;
+#endif /*UIP_CONF_ICMP6*/
+
+/**
+ * The uIP TCP/IP statistics.
+ *
+ * This is the variable in which the uIP TCP/IP statistics are gathered.
+ */
+#if UIP_STATISTICS == 1
+extern struct uip_stats uip_stat;
+#define UIP_STAT( s ) s
+#else
+#define UIP_STAT( s )
+#endif /* UIP_STATISTICS == 1 */
+
+/**
+ * The structure holding the TCP/IP statistics that are gathered if
+ * UIP_STATISTICS is set to 1.
+ *
+ */
+struct uip_stats
+{
+ struct
+ {
+ uip_stats_t recv; /**< Number of received packets at the IP
+ layer. */
+ uip_stats_t sent; /**< Number of sent packets at the IP
+ layer. */
+ uip_stats_t forwarded; /**< Number of forwarded packets at the IP
+ layer. */
+ uip_stats_t drop; /**< Number of dropped packets at the IP
+ layer. */
+ uip_stats_t vhlerr; /**< Number of packets dropped due to wrong
+ IP version or header length. */
+ uip_stats_t hblenerr; /**< Number of packets dropped due to wrong
+ IP length, high byte. */
+ uip_stats_t lblenerr; /**< Number of packets dropped due to wrong
+ IP length, low byte. */
+ uip_stats_t fragerr; /**< Number of packets dropped since they
+ were IP fragments. */
+ uip_stats_t chkerr; /**< Number of packets dropped due to IP
+ checksum errors. */
+ uip_stats_t protoerr; /**< Number of packets dropped since they
+ were neither ICMP, UDP nor TCP. */
+ } ip; /**< IP statistics. */
+ struct
+ {
+ uip_stats_t recv; /**< Number of received ICMP packets. */
+ uip_stats_t sent; /**< Number of sent ICMP packets. */
+ uip_stats_t drop; /**< Number of dropped ICMP packets. */
+ uip_stats_t typeerr; /**< Number of ICMP packets with a wrong
+ type. */
+ uip_stats_t chkerr; /**< Number of ICMP packets with a bad
+ checksum. */
+ } icmp; /**< ICMP statistics. */
+#ifdef UIP_TCP
+ struct
+ {
+ uip_stats_t recv; /**< Number of recived TCP segments. */
+ uip_stats_t sent; /**< Number of sent TCP segments. */
+ uip_stats_t drop; /**< Number of dropped TCP segments. */
+ uip_stats_t chkerr; /**< Number of TCP segments with a bad
+ checksum. */
+ uip_stats_t ackerr; /**< Number of TCP segments with a bad ACK
+ number. */
+ uip_stats_t rst; /**< Number of recevied TCP RST (reset) segments. */
+ uip_stats_t rexmit; /**< Number of retransmitted TCP segments. */
+ uip_stats_t syndrop; /**< Number of dropped SYNs due to too few
+ connections was avaliable. */
+ uip_stats_t synrst; /**< Number of SYNs for closed ports,
+ triggering a RST. */
+ } tcp; /**< TCP statistics. */
+#endif
+#ifdef UIP_UDP
+ struct
+ {
+ uip_stats_t drop; /**< Number of dropped UDP segments. */
+ uip_stats_t recv; /**< Number of recived UDP segments. */
+ uip_stats_t sent; /**< Number of sent UDP segments. */
+ uip_stats_t chkerr; /**< Number of UDP segments with a bad
+ checksum. */
+ } udp; /**< UDP statistics. */
+#endif /* UIP_UDP */
+#if UIP_CONF_IPV6 != 0
+ struct
+ {
+ uip_stats_t drop; /**< Number of dropped ND6 packets. */
+ uip_stats_t recv; /**< Number of recived ND6 packets */
+ uip_stats_t sent; /**< Number of sent ND6 packets */
+ } nd6;
+#endif /*UIP_CONF_IPV6*/
+};
+
+/*---------------------------------------------------------------------------*/
+
+/* All the stuff below this point is internal to uIP and should not be
+ * used directly by an application or by a device driver.
+ */
+
+/*---------------------------------------------------------------------------*/
+
+/* u8_t uip_flags:
+ *
+ * When the application is called, uip_flags will contain the flags
+ * that are defined in this file. Please read below for more
+ * information.
+ */
+CCIF extern u8_t uip_flags;
+
+/* The following flags may be set in the global variable uip_flags
+ before calling the application callback. The UIP_ACKDATA,
+ UIP_NEWDATA, and UIP_CLOSE flags may both be set at the same time,
+ whereas the others are mutually exclusive. Note that these flags
+ should *NOT* be accessed directly, but only through the uIP
+ functions/macros. */
+#define UIP_ACKDATA 1 /* Signifies that the outstanding data was
+ acked and the application should send
+ out new data instead of retransmitting
+ the last data. */
+#define UIP_NEWDATA 2 /* Flags the fact that the peer has sent
+ us new data. */
+#define UIP_REXMIT 4 /* Tells the application to retransmit the
+ data that was last sent. */
+#define UIP_POLL 8 /* Used for polling the application, to
+ check if the application has data that
+ it wants to send. */
+#define UIP_CLOSE 16 /* The remote host has closed the
+ connection, thus the connection has
+ gone away. Or the application signals
+ that it wants to close the
+ connection. */
+#define UIP_ABORT 32 /* The remote host has aborted the
+ connection, thus the connection has
+ gone away. Or the application signals
+ that it wants to abort the
+ connection. */
+#define UIP_CONNECTED 64 /* We have got a connection from a remote
+ host and have set up a new connection
+ for it, or an active connection has
+ been successfully established. */
+
+#define UIP_TIMEDOUT 128 /* The connection has been aborted due to
+ too many retransmissions. */
+
+/**
+ * \brief process the options within a hop by hop or destination option header
+ * \retval 0: nothing to send,
+ * \retval 1: drop pkt
+ * \retval 2: ICMP error message to send
+*/
+
+/*static u8_t
+uip_ext_hdr_options_process(); */
+
+/* uip_process(flag):
+ *
+ * The actual uIP function which does all the work.
+ */
+void uip_process( u8_t flag );
+
+/* The following flags are passed as an argument to the uip_process()
+ function. They are used to distinguish between the two cases where
+ uip_process() is called. It can be called either because we have
+ incoming data that should be processed, or because the periodic
+ timer has fired. These values are never used directly, but only in
+ the macros defined in this file. */
+#define UIP_DATA 1 /* Tells uIP that there is incoming
+ data in the uip_buf buffer. The
+ length of the data is stored in the
+ global variable uip_len. */
+#define UIP_TIMER 2 /* Tells uIP that the periodic timer
+ has fired. */
+#define UIP_POLL_REQUEST 3 /* Tells uIP that a connection should
+ be polled. */
+#define UIP_UDP_SEND_CONN 4 /* Tells uIP that a UDP datagram
+ should be constructed in the
+ uip_buf buffer. */
+#ifdef UIP_UDP
+#define UIP_UDP_TIMER 5
+#endif /* UIP_UDP */
+
+/* The TCP states used in the uip_conn->tcpstateflags. */
+#define UIP_CLOSED 0
+#define UIP_SYN_RCVD 1
+#define UIP_SYN_SENT 2
+#define UIP_ESTABLISHED 3
+#define UIP_FIN_WAIT_1 4
+#define UIP_FIN_WAIT_2 5
+#define UIP_CLOSING 6
+#define UIP_TIME_WAIT 7
+#define UIP_LAST_ACK 8
+#define UIP_TS_MASK 15
+
+#define UIP_STOPPED 16
+
+/* The TCP and IP headers. */
+#include "net/pack_struct_start.h"
+struct uip_tcpip_hdr
+{
+#if UIP_CONF_IPV6 != 0
+ /* IPv6 header. */
+ u8_t vtc, tcflow;
+ u16_t flow;
+ u8_t len[2];
+ u8_t proto, ttl;
+ uip_ip6addr_t srcipaddr, destipaddr;
+#else /* UIP_CONF_IPV6 */
+ /* IPv4 header. */
+ u8_t vhl, tos, len[2], ipid[2], ipoffset[2], ttl, proto;
+ u16_t ipchksum;
+ uip_ipaddr_t srcipaddr, destipaddr;
+#endif /* UIP_CONF_IPV6 */
+
+ /* TCP header. */
+ u16_t srcport, destport;
+ u8_t seqno[4], ackno[4], tcpoffset, flags, wnd[2];
+ u16_t tcpchksum;
+ u8_t urgp[2];
+ u8_t optdata[4];
+}
+#include "net/pack_struct_end.h"
+
+/* The ICMP and IP headers. */
+#include "net/pack_struct_start.h"
+struct uip_icmpip_hdr
+{
+#if UIP_CONF_IPV6 != 0
+ /* IPv6 header. */
+ u8_t vtc, tcf;
+ u16_t flow;
+ u8_t len[2];
+ u8_t proto, ttl;
+ uip_ip6addr_t srcipaddr, destipaddr;
+#else /* UIP_CONF_IPV6 */
+ /* IPv4 header. */
+ u8_t vhl, tos, len[2], ipid[2], ipoffset[2], ttl, proto;
+ u16_t ipchksum;
+ uip_ipaddr_t srcipaddr, destipaddr;
+#endif /* UIP_CONF_IPV6 */
+
+ /* ICMP header. */
+ u8_t type, icode;
+ u16_t icmpchksum;
+#if !UIP_CONF_IPV6
+ u16_t id, seqno;
+ u8_t payload[1];
+#endif /* !UIP_CONF_IPV6 */
+}
+
+#include "net/pack_struct_end.h"
+
+/* The UDP and IP headers. */
+#include "net/pack_struct_start.h"
+struct uip_udpip_hdr
+{
+#if UIP_CONF_IPV6 != 0
+ /* IPv6 header. */
+ u8_t vtc, tcf;
+ u16_t flow;
+ u8_t len[2];
+ u8_t proto, ttl;
+ uip_ip6addr_t srcipaddr, destipaddr;
+#else /* UIP_CONF_IPV6 */
+ /* IP header. */
+ u8_t vhl, tos, len[2], ipid[2], ipoffset[2], ttl, proto;
+ u16_t ipchksum;
+ uip_ipaddr_t srcipaddr, destipaddr;
+#endif /* UIP_CONF_IPV6 */
+
+ /* UDP header. */
+ u16_t srcport, destport;
+ u16_t udplen;
+ u16_t udpchksum;
+}
+
+#include "net/pack_struct_end.h"
+
+/*
+ * In IPv6 the length of the L3 headers before the transport header is
+ * not fixed, due to the possibility to include extension option headers
+ * after the IP header. hence we split here L3 and L4 headers
+ */
+
+/* The IP header */
+struct uip_ip_hdr
+{
+#if UIP_CONF_IPV6 != 0
+ /* IPV6 header */
+ u8_t vtc;
+ u8_t tcflow;
+ u16_t flow;
+ u8_t len[2];
+ u8_t proto, ttl;
+ uip_ip6addr_t srcipaddr, destipaddr;
+#else /* UIP_CONF_IPV6 */
+ /* IPV4 header */
+ u8_t vhl, tos, len[2], ipid[2], ipoffset[2], ttl, proto;
+ u16_t ipchksum;
+ uip_ipaddr_t srcipaddr, destipaddr;
+#endif /* UIP_CONF_IPV6 */
+};
+
+/*
+ * IPv6 extension option headers: we are able to process
+ * the 4 extension headers defined in RFC2460 (IPv6):
+ * - Hop by hop option header, destination option header:
+ * These two are not used by any core IPv6 protocol, hence
+ * we just read them and go to the next. They convey options,
+ * the options defined in RFC2460 are Pad1 and PadN, which do
+ * some padding, and that we do not need to read (the length
+ * field in the header is enough)
+ * - Routing header: this one is most notably used by MIPv6,
+ * which we do not implement, hence we just read it and go
+ * to the next
+ * - Fragmentation header: we read this header and are able to
+ * reassemble packets
+ *
+ * We do not offer any means to send packets with extension headers
+ *
+ * We do not implement Authentication and ESP headers, which are
+ * used in IPSec and defined in RFC4302,4303,4305,4385
+ */
+
+/* common header part */
+struct uip_ext_hdr
+{
+ u8_t next;
+ u8_t len;
+};
+
+/* Hop by Hop option header */
+struct uip_hbho_hdr
+{
+ u8_t next;
+ u8_t len;
+};
+
+/* destination option header */
+struct uip_desto_hdr
+{
+ u8_t next;
+ u8_t len;
+};
+
+/* We do not define structures for PAD1 and PADN options */
+
+/*
+ * routing header
+ * the routing header as 4 common bytes, then routing header type
+ * specific data there are several types of routing header. Type 0 was
+ * deprecated as per RFC5095 most notable other type is 2, used in
+ * RFC3775 (MIPv6) here we do not implement MIPv6, so we just need to
+ * parse the 4 first bytes
+ */
+struct uip_routing_hdr
+{
+ u8_t next;
+ u8_t len;
+ u8_t routing_type;
+ u8_t seg_left;
+};
+
+/* fragmentation header */
+struct uip_frag_hdr
+{
+ u8_t next;
+ u8_t res;
+ u16_t offsetresmore;
+ u32_t id;
+};
+
+/*
+ * an option within the destination or hop by hop option headers
+ * it contains type an length, which is true for all options but PAD1
+ */
+struct uip_ext_hdr_opt
+{
+ u8_t type;
+ u8_t len;
+};
+
+/* PADN option */
+struct uip_ext_hdr_opt_padn
+{
+ u8_t opt_type;
+ u8_t opt_len;
+};
+
+/* TCP header */
+struct uip_tcp_hdr
+{
+ u16_t srcport;
+ u16_t destport;
+ u8_t seqno[4];
+ u8_t ackno[4];
+ u8_t tcpoffset;
+ u8_t flags;
+ u8_t wnd[2];
+ u16_t tcpchksum;
+ u8_t urgp[2];
+ u8_t optdata[4];
+};
+
+/* The ICMP headers. */
+struct uip_icmp_hdr
+{
+ u8_t type, icode;
+ u16_t icmpchksum;
+#if !UIP_CONF_IPV6
+ u16_t id, seqno;
+#endif /* !UIP_CONF_IPV6 */
+};
+
+/* The UDP headers. */
+struct uip_udp_hdr
+{
+ u16_t srcport;
+ u16_t destport;
+ u16_t udplen;
+ u16_t udpchksum;
+};
+
+/**
+ * The buffer size available for user data in the \ref uip_buf buffer.
+ *
+ * This macro holds the available size for user data in the \ref
+ * uip_buf buffer. The macro is intended to be used for checking
+ * bounds of available user data.
+ *
+ * Example:
+ \code
+ snprintf(uip_appdata, UIP_APPDATA_SIZE, "%u\n", i);
+ \endcode
+ *
+ * \hideinitializer
+ */
+#define UIP_APPDATA_SIZE ( UIP_BUFSIZE - UIP_LLH_LEN - UIP_TCPIP_HLEN )
+#define UIP_APPDATA_PTR ( void * ) &uip_buf[UIP_LLH_LEN + UIP_TCPIP_HLEN]
+
+#define UIP_PROTO_ICMP 1
+#define UIP_PROTO_TCP 6
+#define UIP_PROTO_UDP 17
+#define UIP_PROTO_ICMP6 58
+
+#if UIP_CONF_IPV6 != 0
+
+/** @{ */
+
+/** \brief extension headers types */
+#define UIP_PROTO_HBHO 0
+#define UIP_PROTO_DESTO 60
+#define UIP_PROTO_ROUTING 43
+#define UIP_PROTO_FRAG 44
+#define UIP_PROTO_NONE 59
+
+/** @} */
+
+/** @{ */
+
+/** \brief Destination and Hop By Hop extension headers option types */
+#define UIP_EXT_HDR_OPT_PAD1 0
+#define UIP_EXT_HDR_OPT_PADN 1
+
+/** @} */
+
+/** @{ */
+
+/**
+ * \brief Bitmaps for extension header processing
+ *
+ * When processing extension headers, we should record somehow which one we
+ * see, because you cannot have twice the same header, except for destination
+ * We store all this in one u8_t bitmap one bit for each header expected. The
+ * order in the bitmap is the order recommended in RFC2460
+ */
+#define UIP_EXT_HDR_BITMAP_HBHO 0x01
+#define UIP_EXT_HDR_BITMAP_DESTO1 0x02
+#define UIP_EXT_HDR_BITMAP_ROUTING 0x04
+#define UIP_EXT_HDR_BITMAP_FRAG 0x08
+#define UIP_EXT_HDR_BITMAP_AH 0x10
+#define UIP_EXT_HDR_BITMAP_ESP 0x20
+#define UIP_EXT_HDR_BITMAP_DESTO2 0x40
+
+/** @} */
+#endif /* UIP_CONF_IPV6 */
+
+/* Header sizes. */
+#if UIP_CONF_IPV6 != 0
+#define UIP_IPH_LEN 40
+#define UIP_FRAGH_LEN 8
+#else /* UIP_CONF_IPV6 */
+#define UIP_IPH_LEN 20 /* Size of IP header */
+#endif /* UIP_CONF_IPV6 */
+
+#define UIP_UDPH_LEN 8 /* Size of UDP header */
+#define UIP_TCPH_LEN 20 /* Size of TCP header */
+#ifdef UIP_IPH_LEN
+#define UIP_ICMPH_LEN 4 /* Size of ICMP header */
+#endif
+#define UIP_IPUDPH_LEN ( UIP_UDPH_LEN + UIP_IPH_LEN ) /* Size of IP +
+ * UDP
+ * header */
+#define UIP_IPTCPH_LEN ( UIP_TCPH_LEN + UIP_IPH_LEN ) /* Size of IP +
+ * TCP
+ * header */
+#define UIP_TCPIP_HLEN UIP_IPTCPH_LEN
+#define UIP_IPICMPH_LEN ( UIP_IPH_LEN + UIP_ICMPH_LEN ) /* size of ICMP
+ + IP header */
+#define UIP_LLIPH_LEN ( UIP_LLH_LEN + UIP_IPH_LEN ) /* size of L2
+ + IP header */
+#if UIP_CONF_IPV6 != 0
+
+/**
+ * The sums below are quite used in ND. When used for uip_buf, we
+ * include link layer length when used for uip_len, we do not, hence
+ * we need values with and without LLH_LEN we do not use capital
+ * letters as these values are variable
+ */
+#define uip_l2_l3_hdr_len ( UIP_LLH_LEN + UIP_IPH_LEN + uip_ext_len )
+#define uip_l2_l3_icmp_hdr_len ( UIP_LLH_LEN + UIP_IPH_LEN + uip_ext_len + UIP_ICMPH_LEN )
+#define uip_l3_hdr_len ( UIP_IPH_LEN + uip_ext_len )
+#define uip_l3_icmp_hdr_len ( UIP_IPH_LEN + uip_ext_len + UIP_ICMPH_LEN )
+#endif /*UIP_CONF_IPV6*/
+
+#ifdef UIP_FIXEDADDR
+CCIF extern const uip_ipaddr_t uip_hostaddr, uip_netmask, uip_draddr;
+#else /* UIP_FIXEDADDR */
+CCIF extern uip_ipaddr_t uip_hostaddr, uip_netmask, uip_draddr;
+#endif /* UIP_FIXEDADDR */
+CCIF extern const uip_ipaddr_t uip_broadcast_addr;
+CCIF extern const uip_ipaddr_t uip_all_zeroes_addr;
+
+#ifdef UIP_FIXEDETHADDR
+CCIF extern const uip_lladdr_t uip_lladdr;
+#else
+CCIF extern uip_lladdr_t uip_lladdr;
+#endif
+#if UIP_CONF_IPV6 != 0
+
+/**
+ * \brief Is IPv6 address a the unspecified address
+ * a is of type uip_ipaddr_t
+ */
+#define uip_is_addr_unspecified( a ) \
+ ( \
+ (((a)->u16[0]) == 0) && \
+ (((a)->u16[1]) == 0) && \
+ (((a)->u16[2]) == 0) && \
+ (((a)->u16[3]) == 0) && \
+ (((a)->u16[4]) == 0) && \
+ (((a)->u16[5]) == 0) && \
+ (((a)->u16[6]) == 0) && \
+ (((a)->u16[7]) == 0) \
+ )
+
+/** \brief Is IPv6 address a the link local all-nodes multicast address */
+#define uip_is_addr_linklocal_allnodes_mcast( a ) \
+ ( \
+ (((a)->u8[0]) == 0xff) && \
+ (((a)->u8[1]) == 0x02) && \
+ (((a)->u16[1]) == 0) && \
+ (((a)->u16[2]) == 0) && \
+ (((a)->u16[3]) == 0) && \
+ (((a)->u16[4]) == 0) && \
+ (((a)->u16[5]) == 0) && \
+ (((a)->u16[6]) == 0) && \
+ (((a)->u8[14]) == 0) && \
+ (((a)->u8[15]) == 0x01) \
+ )
+
+/** \brief set IP address a to unspecified */
+#define uip_create_unspecified( a ) uip_ip6addr( a, 0, 0, 0, 0, 0, 0, 0, 0 )
+
+/** \brief set IP address a to the link local all-nodes multicast address */
+#define uip_create_linklocal_allnodes_mcast( a ) uip_ip6addr( a, 0xff02, 0, 0, 0, 0, 0, 0, 0x0001 )
+
+/** \brief set IP address a to the link local all-routers multicast address */
+#define uip_create_linklocal_allrouters_mcast( a ) uip_ip6addr( a, 0xff02, 0, 0, 0, 0, 0, 0, 0x0002 )
+
+/**
+ * \brief is addr (a) a solicited node multicast address, see RFC3513
+ * a is of type uip_ipaddr_t*
+ */
+#define uip_is_addr_solicited_node( a ) \
+ ( \
+ (((a)->u8[0]) == 0xFF) && \
+ (((a)->u8[1]) == 0x02) && \
+ (((a)->u16[1]) == 0) && \
+ (((a)->u16[2]) == 0) && \
+ (((a)->u16[3]) == 0) && \
+ (((a)->u16[4]) == 0) && \
+ (((a)->u16[5]) == 1) && \
+ (((a)->u8[12]) == 0xFF) \
+ )
+
+/**
+ * \briefput in b the solicited node address corresponding to address a
+ * both a and b are of type uip_ipaddr_t*
+ * */
+#define uip_create_solicited_node( a, b ) \
+ ( ((b)->u8[0]) = 0xFF ); \
+ ( ((b)->u8[1]) = 0x02 ); \
+ ( ((b)->u16[1]) = 0 ); \
+ ( ((b)->u16[2]) = 0 ); \
+ ( ((b)->u16[3]) = 0 ); \
+ ( ((b)->u16[4]) = 0 ); \
+ ( ((b)->u8[10]) = 0 ); \
+ ( ((b)->u8[11]) = 0x01 ); \
+ ( ((b)->u8[12]) = 0xFF ); \
+ ( ((b)->u8[13]) = ((a)->u8[13]) ); \
+ ( ((b)->u16[7]) = ((a)->u16[7]) )
+
+/**
+ * \brief is addr (a) a link local unicast address, see RFC3513
+ * i.e. is (a) on prefix FE80::/10
+ * a is of type uip_ipaddr_t*
+ */
+#define uip_is_addr_link_local( a ) ( (((a)->u8[0]) == 0xFE) && (((a)->u8[1]) == 0x80) )
+
+/**
+ * \brief was addr (a) forged based on the mac address m
+ * a type is uip_ipaddr_t
+ * m type is uiplladdr_t
+ */
+#ifdef UIP_CONF_LL_802154
+#define uip_is_addr_mac_addr_based( a, m ) \
+ ( \
+ (((a)->u8[8]) == (((m)->addr[0]) ^ 0x02)) && \
+ (((a)->u8[9]) == (m)->addr[1]) && \
+ (((a)->u8[10]) == (m)->addr[2]) && \
+ (((a)->u8[11]) == (m)->addr[3]) && \
+ (((a)->u8[12]) == (m)->addr[4]) && \
+ (((a)->u8[13]) == (m)->addr[5]) && \
+ (((a)->u8[14]) == (m)->addr[6]) && \
+ (((a)->u8[15]) == (m)->addr[7]) \
+ )
+#else
+#define uip_is_addr_mac_addr_based( a, m ) \
+ ( \
+ (((a)->u8[8]) == (((m)->addr[0]) | 0x02)) && \
+ (((a)->u8[9]) == (m)->addr[1]) && \
+ (((a)->u8[10]) == (m)->addr[2]) && \
+ (((a)->u8[11]) == 0xff) && \
+ (((a)->u8[12]) == 0xfe) && \
+ (((a)->u8[13]) == (m)->addr[3]) && \
+ (((a)->u8[14]) == (m)->addr[4]) && \
+ (((a)->u8[15]) == (m)->addr[5]) \
+ )
+#endif /*UIP_CONF_LL_802154*/
+
+/**
+ * \brief is address a multicast address, see RFC 3513
+ * a is of type uip_ipaddr_t*
+ * */
+#define uip_is_addr_mcast( a ) ( ((a)->u8[0]) == 0xFF )
+
+/**
+ * \brief is group-id of multicast address a
+ * the all nodes group-id
+ */
+#define uip_is_mcast_group_id_all_nodes( a ) \
+ ( \
+ (((a)->u16[1]) == 0) && \
+ (((a)->u16[2]) == 0) && \
+ (((a)->u16[3]) == 0) && \
+ (((a)->u16[4]) == 0) && \
+ (((a)->u16[5]) == 0) && \
+ (((a)->u16[6]) == 0) && \
+ (((a)->u8[14]) == 0) && \
+ (((a)->u8[15]) == 1) \
+ )
+
+/**
+ * \brief is group-id of multicast address a
+ * the all routers group-id
+ */
+#define uip_is_mcast_group_id_all_routers( a ) \
+ ( \
+ (((a)->u16[1]) == 0) && \
+ (((a)->u16[2]) == 0) && \
+ (((a)->u16[3]) == 0) && \
+ (((a)->u16[4]) == 0) && \
+ (((a)->u16[5]) == 0) && \
+ (((a)->u16[6]) == 0) && \
+ (((a)->u8[14]) == 0) && \
+ (((a)->u8[15]) == 2) \
+ )
+#endif /*UIP_CONF_IPV6*/
+
+/**
+ * Calculate the Internet checksum over a buffer.
+ *
+ * The Internet checksum is the one's complement of the one's
+ * complement sum of all 16-bit words in the buffer.
+ *
+ * See RFC1071.
+ *
+ * \param buf A pointer to the buffer over which the checksum is to be
+ * computed.
+ *
+ * \param len The length of the buffer over which the checksum is to
+ * be computed.
+ *
+ * \return The Internet checksum of the buffer.
+ */
+u16_t uip_chksum( u16_t *buf, u16_t len );
+
+/**
+ * Calculate the IP header checksum of the packet header in uip_buf.
+ *
+ * The IP header checksum is the Internet checksum of the 20 bytes of
+ * the IP header.
+ *
+ * \return The IP header checksum of the IP header in the uip_buf
+ * buffer.
+ */
+u16_t uip_ipchksum( void );
+
+/**
+ * Calculate the TCP checksum of the packet in uip_buf and uip_appdata.
+ *
+ * The TCP checksum is the Internet checksum of data contents of the
+ * TCP segment, and a pseudo-header as defined in RFC793.
+ *
+ * \return The TCP checksum of the TCP segment in uip_buf and pointed
+ * to by uip_appdata.
+ */
+u16_t uip_tcpchksum( void );
+
+/**
+ * Calculate the UDP checksum of the packet in uip_buf and uip_appdata.
+ *
+ * The UDP checksum is the Internet checksum of data contents of the
+ * UDP segment, and a pseudo-header as defined in RFC768.
+ *
+ * \return The UDP checksum of the UDP segment in uip_buf and pointed
+ * to by uip_appdata.
+ */
+u16_t uip_udpchksum( void );
+
+/**
+ * Calculate the ICMP checksum of the packet in uip_buf.
+ *
+ * \return The ICMP checksum of the ICMP packet in uip_buf
+ */
+u16_t uip_icmp6chksum( void );
+
+/* Events that can get posted to the uIP event queue. These are events
+originating from the Ethernet interface or from a timer. */
+#define uipETHERNET_RX_EVENT 0x01UL
+#define uipETHERNET_TX_EVENT 0x02UL
+#define uipARP_TIMER_EVENT 0x04UL
+#define uipPERIODIC_TIMER_EVENT 0x08UL
+#define uipAPPLICATION_SEND_EVENT 0x10UL
+
+
+#endif /* __UIP_H__ */
+
+/** @} */
diff --git a/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/uip_arch.h b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/uip_arch.h new file mode 100644 index 0000000..b529a73 --- /dev/null +++ b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/uip_arch.h @@ -0,0 +1,138 @@ +/**
+ * \addtogroup uip
+ * {@
+ */
+
+/**
+ * \defgroup uiparch Architecture specific uIP functions
+ * @{
+ *
+ * The functions in the architecture specific module implement the IP
+ * check sum and 32-bit additions.
+ *
+ * The IP checksum calculation is the most computationally expensive
+ * operation in the TCP/IP stack and it therefore pays off to
+ * implement this in efficient assembler. The purpose of the uip-arch
+ * module is to let the checksum functions to be implemented in
+ * architecture specific assembler.
+ *
+ */
+
+/**
+ * \file
+ * Declarations of architecture specific functions.
+ * \author Adam Dunkels <adam@dunkels.com>
+ */
+
+/*
+ * Copyright (c) 2001, Adam Dunkels.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote
+ * products derived from this software without specific prior
+ * written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * This file is part of the uIP TCP/IP stack.
+ *
+ * $Id: uip_arch.h,v 1.1 2006/06/17 22:41:19 adamdunkels Exp $
+ *
+ */
+
+#ifndef __UIP_ARCH_H__
+#define __UIP_ARCH_H__
+
+#include "net/uip.h"
+
+/**
+ * Carry out a 32-bit addition.
+ *
+ * Because not all architectures for which uIP is intended has native
+ * 32-bit arithmetic, uIP uses an external C function for doing the
+ * required 32-bit additions in the TCP protocol processing. This
+ * function should add the two arguments and place the result in the
+ * global variable uip_acc32.
+ *
+ * \note The 32-bit integer pointed to by the op32 parameter and the
+ * result in the uip_acc32 variable are in network byte order (big
+ * endian).
+ *
+ * \param op32 A pointer to a 4-byte array representing a 32-bit
+ * integer in network byte order (big endian).
+ *
+ * \param op16 A 16-bit integer in host byte order.
+ */
+void uip_add32(u8_t *op32, u16_t op16);
+
+/**
+ * Calculate the Internet checksum over a buffer.
+ *
+ * The Internet checksum is the one's complement of the one's
+ * complement sum of all 16-bit words in the buffer.
+ *
+ * See RFC1071.
+ *
+ * \note This function is not called in the current version of uIP,
+ * but future versions might make use of it.
+ *
+ * \param buf A pointer to the buffer over which the checksum is to be
+ * computed.
+ *
+ * \param len The length of the buffer over which the checksum is to
+ * be computed.
+ *
+ * \return The Internet checksum of the buffer.
+ */
+u16_t uip_chksum(u16_t *buf, u16_t len);
+
+/**
+ * Calculate the IP header checksum of the packet header in uip_buf.
+ *
+ * The IP header checksum is the Internet checksum of the 20 bytes of
+ * the IP header.
+ *
+ * \return The IP header checksum of the IP header in the uip_buf
+ * buffer.
+ */
+u16_t uip_ipchksum(void);
+
+/**
+ * Calculate the TCP checksum of the packet in uip_buf and uip_appdata.
+ *
+ * The TCP checksum is the Internet checksum of data contents of the
+ * TCP segment, and a pseudo-header as defined in RFC793.
+ *
+ * \note The uip_appdata pointer that points to the packet data may
+ * point anywhere in memory, so it is not possible to simply calculate
+ * the Internet checksum of the contents of the uip_buf buffer.
+ *
+ * \return The TCP checksum of the TCP segment in uip_buf and pointed
+ * to by uip_appdata.
+ */
+u16_t uip_tcpchksum(void);
+
+u16_t uip_udpchksum(void);
+
+/** @} */
+/** @} */
+
+#endif /* __UIP_ARCH_H__ */
diff --git a/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/uip_arp.h b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/uip_arp.h new file mode 100644 index 0000000..e04d353 --- /dev/null +++ b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/uip_arp.h @@ -0,0 +1,149 @@ +/**
+ * \addtogroup uip
+ * @{
+ */
+
+/**
+ * \addtogroup uiparp
+ * @{
+ */
+
+/**
+ * \file
+ * Macros and definitions for the ARP module.
+ * \author Adam Dunkels <adam@dunkels.com>
+ */
+
+/*
+ * Copyright (c) 2001-2003, Adam Dunkels.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote
+ * products derived from this software without specific prior
+ * written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * This file is part of the uIP TCP/IP stack.
+ *
+ * $Id: uip_arp.h,v 1.2 2006/08/26 23:58:45 oliverschmidt Exp $
+ *
+ */
+#ifndef __UIP_ARP_H__
+#define __UIP_ARP_H__
+
+#include "net/uip.h"
+
+CCIF extern struct uip_eth_addr uip_ethaddr;
+
+/**
+ * The Ethernet header.
+ */
+#include "net/pack_struct_start.h"
+struct uip_eth_hdr
+{
+ struct uip_eth_addr dest;
+ struct uip_eth_addr src;
+ u16_t type;
+}
+
+#include "net/pack_struct_end.h"
+
+#define UIP_ETHTYPE_ARP 0x0806
+#define UIP_ETHTYPE_IP 0x0800
+#define UIP_ETHTYPE_IPV6 0x86dd
+
+/* The uip_arp_init() function must be called before any of the other
+ ARP functions. */
+void uip_arp_init( void );
+
+/* The uip_arp_ipin() function should be called whenever an IP packet
+ arrives from the Ethernet. This function refreshes the ARP table or
+ inserts a new mapping if none exists. The function assumes that an
+ IP packet with an Ethernet header is present in the uip_buf buffer
+ and that the length of the packet is in the uip_len variable. */
+
+/*void uip_arp_ipin(void);*/
+#define uip_arp_ipin()
+
+/* The uip_arp_arpin() should be called when an ARP packet is received
+ by the Ethernet driver. This function also assumes that the
+ Ethernet frame is present in the uip_buf buffer. When the
+ uip_arp_arpin() function returns, the contents of the uip_buf
+ buffer should be sent out on the Ethernet if the uip_len variable
+ is > 0. */
+void uip_arp_arpin( void );
+
+/* The uip_arp_out() function should be called when an IP packet
+ should be sent out on the Ethernet. This function creates an
+ Ethernet header before the IP header in the uip_buf buffer. The
+ Ethernet header will have the correct Ethernet MAC destination
+ address filled in if an ARP table entry for the destination IP
+ address (or the IP address of the default router) is present. If no
+ such table entry is found, the IP packet is overwritten with an ARP
+ request and we rely on TCP to retransmit the packet that was
+ overwritten. In any case, the uip_len variable holds the length of
+ the Ethernet frame that should be transmitted. */
+void uip_arp_out( void );
+
+/* The uip_arp_timer() function should be called every ten seconds. It
+ is responsible for flushing old entries in the ARP table. */
+void uip_arp_timer( void );
+
+/** @} */
+
+/**
+ * \addtogroup uipconffunc
+ * @{
+ */
+
+/**
+ * Specifiy the Ethernet MAC address.
+ *
+ * The ARP code needs to know the MAC address of the Ethernet card in
+ * order to be able to respond to ARP queries and to generate working
+ * Ethernet headers.
+ *
+ * \note This macro only specifies the Ethernet MAC address to the ARP
+ * code. It cannot be used to change the MAC address of the Ethernet
+ * card.
+ *
+ * \param eaddr A pointer to a struct uip_eth_addr containing the
+ * Ethernet MAC address of the Ethernet card.
+ *
+ * \hideinitializer
+ */
+#define uip_setethaddr( eaddr ) \
+ do \
+ { \
+ uip_ethaddr.addr[0] = eaddr.addr[0]; \
+ uip_ethaddr.addr[1] = eaddr.addr[1]; \
+ uip_ethaddr.addr[2] = eaddr.addr[2]; \
+ uip_ethaddr.addr[3] = eaddr.addr[3]; \
+ uip_ethaddr.addr[4] = eaddr.addr[4]; \
+ uip_ethaddr.addr[5] = eaddr.addr[5]; \
+ } while( 0 )
+
+ /** @} */
+#endif /* __UIP_ARP_H__ */
+
+ /** @} */
+
diff --git a/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/uipopt.h b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/uipopt.h new file mode 100644 index 0000000..ddf6a24 --- /dev/null +++ b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/uipopt.h @@ -0,0 +1,695 @@ +/**
+ * \addtogroup uip
+ * @{
+ */
+
+/**
+ * \defgroup uipopt Configuration options for uIP
+ * @{
+ *
+ * uIP is configured using the per-project configuration file
+ * "uipopt.h". This file contains all compile-time options for uIP and
+ * should be tweaked to match each specific project. The uIP
+ * distribution contains a documented example "uipopt.h" that can be
+ * copied and modified for each project.
+ *
+ * \note Contiki does not use the uipopt.h file to configure uIP, but
+ * uses a per-port uip-conf.h file that should be edited instead.
+ */
+
+/**
+ * \file
+ * Configuration options for uIP.
+ * \author Adam Dunkels <adam@dunkels.com>
+ *
+ * This file is used for tweaking various configuration options for
+ * uIP. You should make a copy of this file into one of your project's
+ * directories instead of editing this example "uipopt.h" file that
+ * comes with the uIP distribution.
+ */
+
+/*
+ * Copyright (c) 2001-2003, Adam Dunkels.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote
+ * products derived from this software without specific prior
+ * written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * This file is part of the uIP TCP/IP stack.
+ *
+ * $Id: uipopt.h,v 1.11 2009/04/10 00:37:48 adamdunkels Exp $
+ *
+ */
+#ifndef __UIPOPT_H__
+#define __UIPOPT_H__
+
+#ifndef UIP_LITTLE_ENDIAN
+#define UIP_LITTLE_ENDIAN 3412
+#endif /* UIP_LITTLE_ENDIAN */
+#ifndef UIP_BIG_ENDIAN
+#define UIP_BIG_ENDIAN 1234
+#endif /* UIP_BIG_ENDIAN */
+
+#include "uip-conf.h"
+//_RB_#include "contiki-conf.h"
+
+/*------------------------------------------------------------------------------*/
+
+/**
+ * \defgroup uipoptstaticconf Static configuration options
+ * @{
+ *
+ * These configuration options can be used for setting the IP address
+ * settings statically, but only if UIP_FIXEDADDR is set to 1. The
+ * configuration options for a specific node includes IP address,
+ * netmask and default router as well as the Ethernet address. The
+ * netmask, default router and Ethernet address are applicable only
+ * if uIP should be run over Ethernet.
+ *
+ * This options are meaningful only for the IPv4 code.
+ *
+ * All of these should be changed to suit your project.
+ */
+
+/**
+ * Determines if uIP should use a fixed IP address or not.
+ *
+ * If uIP should use a fixed IP address, the settings are set in the
+ * uipopt.h file. If not, the macros uip_sethostaddr(),
+ * uip_setdraddr() and uip_setnetmask() should be used instead.
+ *
+ * \hideinitializer
+ */
+#ifdef UIP_CONF_FIXEDADDR
+#define UIP_FIXED_ADDR UIP_CONF_FIXEDADDR
+#define UIP_FIXEDADDR 1
+#endif
+
+/**
+ * Ping IP address assignment.
+ *
+ * uIP uses a "ping" packets for setting its own IP address if this
+ * option is set. If so, uIP will start with an empty IP address and
+ * the destination IP address of the first incoming "ping" (ICMP echo)
+ * packet will be used for setting the hosts IP address.
+ *
+ * \note This works only if UIP_FIXEDADDR is 0.
+ *
+ * \hideinitializer
+ */
+#ifdef UIP_CONF_PINGADDRCONF
+#define UIP_PINGADDRCONF UIP_CONF_PINGADDRCONF
+#else /* UIP_CONF_PINGADDRCONF */
+#define UIP_PINGADDRCONF 0
+#endif /* UIP_CONF_PINGADDRCONF */
+
+/**
+ * Specifies if the uIP ARP module should be compiled with a fixed
+ * Ethernet MAC address or not.
+ *
+ * If this configuration option is 0, the macro uip_setethaddr() can
+ * be used to specify the Ethernet address at run-time.
+ *
+ * \hideinitializer
+ */
+#define UIP_FIXEDETHADDR 0
+
+/** @} */
+
+/*------------------------------------------------------------------------------*/
+
+/**
+ * \defgroup uipoptip IP configuration options
+ * @{
+ *
+ */
+
+/**
+ * The IP TTL (time to live) of IP packets sent by uIP.
+ *
+ * This should normally not be changed.
+ */
+#define UIP_TTL 64
+
+/**
+ * The maximum time an IP fragment should wait in the reassembly
+ * buffer before it is dropped.
+ *
+ */
+#define UIP_REASS_MAXAGE 60 /*60s*/
+
+/**
+ * Turn on support for IP packet reassembly.
+ *
+ * uIP supports reassembly of fragmented IP packets. This features
+ * requires an additional amount of RAM to hold the reassembly buffer
+ * and the reassembly code size is approximately 700 bytes. The
+ * reassembly buffer is of the same size as the uip_buf buffer
+ * (configured by UIP_BUFSIZE).
+ *
+ * \note IP packet reassembly is not heavily tested.
+ *
+ * \hideinitializer
+ */
+#ifdef UIP_CONF_REASSEMBLY
+#define UIP_REASSEMBLY UIP_CONF_REASSEMBLY
+#else /* UIP_CONF_REASSEMBLY */
+#define UIP_REASSEMBLY 0
+#endif /* UIP_CONF_REASSEMBLY */
+
+/** @} */
+
+/*------------------------------------------------------------------------------*/
+
+/**
+ * \defgroup uipoptipv6 IPv6 configuration options
+ * @{
+ *
+ */
+
+/** The maximum transmission unit at the IP Layer*/
+#define UIP_LINK_MTU 1280
+
+#ifndef UIP_CONF_IPV6
+
+/** Do we use IPv6 or not (default: no) */
+#define UIP_CONF_IPV6 0
+#endif
+#ifndef UIP_CONF_IPV6_QUEUE_PKT
+
+/** Do we do per %neighbor queuing during address resolution (default: no) */
+#define UIP_CONF_IPV6_QUEUE_PKT 0
+#endif
+#ifndef UIP_CONF_IPV6_CHECKS
+
+/** Do we do IPv6 consistency checks (highly recommended, default: yes) */
+#define UIP_CONF_IPV6_CHECKS 1
+#endif
+#ifndef UIP_CONF_IPV6_REASSEMBLY
+
+/** Do we do IPv6 fragmentation (default: no) */
+#define UIP_CONF_IPV6_REASSEMBLY 0
+#endif
+#ifndef UIP_CONF_NETIF_MAX_ADDRESSES
+
+/** Default number of IPv6 addresses associated to the node's interface */
+#define UIP_CONF_NETIF_MAX_ADDRESSES 3
+#endif
+#ifndef UIP_CONF_ND6_MAX_PREFIXES
+
+/** Default number of IPv6 prefixes associated to the node's interface */
+#define UIP_CONF_ND6_MAX_PREFIXES 3
+#endif
+#ifndef UIP_CONF_ND6_MAX_NEIGHBORS
+
+/** Default number of neighbors that can be stored in the %neighbor cache */
+#define UIP_CONF_ND6_MAX_NEIGHBORS 4
+#endif
+#ifndef UIP_CONF_ND6_MAX_DEFROUTERS
+
+/** Minimum number of default routers */
+#define UIP_CONF_ND6_MAX_DEFROUTERS 2
+#endif
+
+/** @} */
+
+/*------------------------------------------------------------------------------*/
+
+/**
+ * \defgroup uipoptudp UDP configuration options
+ * @{
+ *
+ * \note The UDP support in uIP is still not entirely complete; there
+ * is no support for sending or receiving broadcast or multicast
+ * packets, but it works well enough to support a number of vital
+ * applications such as DNS queries, though
+ */
+
+/**
+ * Toggles whether UDP support should be compiled in or not.
+ *
+ * \hideinitializer
+ */
+#ifdef UIP_CONF_UDP
+#define UIP_UDP UIP_CONF_UDP
+#else /* UIP_CONF_UDP */
+#define UIP_UDP 0
+#endif /* UIP_CONF_UDP */
+
+/**
+ * Toggles if UDP checksums should be used or not.
+ *
+ * \note Support for UDP checksums is currently not included in uIP,
+ * so this option has no function.
+ *
+ * \hideinitializer
+ */
+#ifdef UIP_CONF_UDP_CHECKSUMS
+#define UIP_UDP_CHECKSUMS UIP_CONF_UDP_CHECKSUMS
+#else
+#define UIP_UDP_CHECKSUMS 0
+#endif
+
+/**
+ * The maximum amount of concurrent UDP connections.
+ *
+ * \hideinitializer
+ */
+#ifdef UIP_CONF_UDP_CONNS
+#define UIP_UDP_CONNS UIP_CONF_UDP_CONNS
+#else /* UIP_CONF_UDP_CONNS */
+#define UIP_UDP_CONNS 10
+#endif /* UIP_CONF_UDP_CONNS */
+
+/**
+ * The name of the function that should be called when UDP datagrams arrive.
+ *
+ * \hideinitializer
+ */
+
+/** @} */
+
+/*------------------------------------------------------------------------------*/
+
+/**
+ * \defgroup uipopttcp TCP configuration options
+ * @{
+ */
+
+/**
+ * Toggles whether UDP support should be compiled in or not.
+ *
+ * \hideinitializer
+ */
+#ifdef UIP_CONF_TCP
+#define UIP_TCP UIP_CONF_TCP
+#else /* UIP_CONF_UDP */
+#define UIP_TCP 1
+#endif /* UIP_CONF_UDP */
+
+/**
+ * Determines if support for opening connections from uIP should be
+ * compiled in.
+ *
+ * If the applications that are running on top of uIP for this project
+ * do not need to open outgoing TCP connections, this configuration
+ * option can be turned off to reduce the code size of uIP.
+ *
+ * \hideinitializer
+ */
+#ifndef UIP_CONF_ACTIVE_OPEN
+#define UIP_ACTIVE_OPEN 1
+#else /* UIP_CONF_ACTIVE_OPEN */
+#define UIP_ACTIVE_OPEN UIP_CONF_ACTIVE_OPEN
+#endif /* UIP_CONF_ACTIVE_OPEN */
+
+/**
+ * The maximum number of simultaneously open TCP connections.
+ *
+ * Since the TCP connections are statically allocated, turning this
+ * configuration knob down results in less RAM used. Each TCP
+ * connection requires approximately 30 bytes of memory.
+ *
+ * \hideinitializer
+ */
+#ifndef UIP_CONF_MAX_CONNECTIONS
+#define UIP_CONNS 10
+#else /* UIP_CONF_MAX_CONNECTIONS */
+#define UIP_CONNS UIP_CONF_MAX_CONNECTIONS
+#endif /* UIP_CONF_MAX_CONNECTIONS */
+
+/**
+ * The maximum number of simultaneously listening TCP ports.
+ *
+ * Each listening TCP port requires 2 bytes of memory.
+ *
+ * \hideinitializer
+ */
+#ifndef UIP_CONF_MAX_LISTENPORTS
+#define UIP_LISTENPORTS 20
+#else /* UIP_CONF_MAX_LISTENPORTS */
+#define UIP_LISTENPORTS UIP_CONF_MAX_LISTENPORTS
+#endif /* UIP_CONF_MAX_LISTENPORTS */
+
+/**
+ * Determines if support for TCP urgent data notification should be
+ * compiled in.
+ *
+ * Urgent data (out-of-band data) is a rarely used TCP feature that
+ * very seldom would be required.
+ *
+ * \hideinitializer
+ */
+#define UIP_URGDATA 0
+
+/**
+ * The initial retransmission timeout counted in timer pulses.
+ *
+ * This should not be changed.
+ */
+#define UIP_RTO 3
+
+/**
+ * The maximum number of times a segment should be retransmitted
+ * before the connection should be aborted.
+ *
+ * This should not be changed.
+ */
+#define UIP_MAXRTX 8
+
+/**
+ * The maximum number of times a SYN segment should be retransmitted
+ * before a connection request should be deemed to have been
+ * unsuccessful.
+ *
+ * This should not need to be changed.
+ */
+#define UIP_MAXSYNRTX 5
+
+/**
+ * The TCP maximum segment size.
+ *
+ * This is should not be to set to more than
+ * UIP_BUFSIZE - UIP_LLH_LEN - UIP_TCPIP_HLEN.
+ */
+#ifdef UIP_CONF_TCP_MSS
+#define UIP_TCP_MSS UIP_CONF_TCP_MSS
+#else
+#define UIP_TCP_MSS ( UIP_BUFSIZE - UIP_LLH_LEN - UIP_TCPIP_HLEN )
+#endif
+
+/**
+ * The size of the advertised receiver's window.
+ *
+ * Should be set low (i.e., to the size of the uip_buf buffer) if the
+ * application is slow to process incoming data, or high (32768 bytes)
+ * if the application processes data quickly.
+ *
+ * \hideinitializer
+ */
+#ifndef UIP_CONF_RECEIVE_WINDOW
+#define UIP_RECEIVE_WINDOW UIP_TCP_MSS
+#else
+#define UIP_RECEIVE_WINDOW UIP_CONF_RECEIVE_WINDOW
+#endif
+
+/**
+ * How long a connection should stay in the TIME_WAIT state.
+ *
+ * This configuration option has no real implication, and it should be
+ * left untouched.
+ */
+#define UIP_TIME_WAIT_TIMEOUT 120
+
+/** @} */
+
+/*------------------------------------------------------------------------------*/
+
+/**
+ * \defgroup uipoptarp ARP configuration options
+ * @{
+ */
+
+/**
+ * The size of the ARP table.
+ *
+ * This option should be set to a larger value if this uIP node will
+ * have many connections from the local network.
+ *
+ * \hideinitializer
+ */
+#ifdef UIP_CONF_ARPTAB_SIZE
+#define UIP_ARPTAB_SIZE UIP_CONF_ARPTAB_SIZE
+#else
+#define UIP_ARPTAB_SIZE 8
+#endif
+
+/**
+ * The maximum age of ARP table entries measured in 10ths of seconds.
+ *
+ * An UIP_ARP_MAXAGE of 120 corresponds to 20 minutes (BSD
+ * default).
+ */
+#define UIP_ARP_MAXAGE 120
+
+/** @} */
+
+/*------------------------------------------------------------------------------*/
+
+/**
+ * \defgroup uipoptmac layer 2 options (for ipv6)
+ * @{
+ */
+#define UIP_DEFAULT_PREFIX_LEN 64
+
+/** @} */
+
+/*------------------------------------------------------------------------------*/
+
+/**
+ * \defgroup uipoptsics 6lowpan options (for ipv6)
+ * @{
+ */
+
+/**
+ * Timeout for packet reassembly at the 6lowpan layer
+ * (should be < 60s)
+ */
+#ifdef SICSLOWPAN_CONF_MAXAGE
+#define SICSLOWPAN_REASS_MAXAGE SICSLOWPAN_CONF_MAXAGE
+#else
+#define SICSLOWPAN_REASS_MAXAGE 20
+#endif
+
+/**
+ * Do we compress the IP header or not (default: no)
+ */
+#ifndef SICSLOWPAN_CONF_COMPRESSION
+#define SICSLOWPAN_CONF_COMPRESSION 0
+#endif
+
+/**
+ * If we use IPHC compression, how many address contexts do we support
+ */
+#ifndef SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS
+#define SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS 1
+#endif
+
+/**
+ * Do we support 6lowpan fragmentation
+ */
+#ifndef SICSLOWPAN_CONF_FRAG
+#define SICSLOWPAN_CONF_FRAG 0
+#endif
+
+/** @} */
+
+/*------------------------------------------------------------------------------*/
+
+/**
+ * \defgroup uipoptgeneral General configuration options
+ * @{
+ */
+
+/**
+ * The size of the uIP packet buffer.
+ *
+ * The uIP packet buffer should not be smaller than 60 bytes, and does
+ * not need to be larger than 1514 bytes. Lower size results in lower
+ * TCP throughput, larger size results in higher TCP throughput.
+ *
+ * \hideinitializer
+ */
+#ifndef UIP_CONF_BUFFER_SIZE
+#define UIP_BUFSIZE UIP_LINK_MTU + UIP_LLH_LEN
+#else /* UIP_CONF_BUFFER_SIZE */
+#define UIP_BUFSIZE UIP_CONF_BUFFER_SIZE
+#endif /* UIP_CONF_BUFFER_SIZE */
+
+/**
+ * Determines if statistics support should be compiled in.
+ *
+ * The statistics is useful for debugging and to show the user.
+ *
+ * \hideinitializer
+ */
+#ifndef UIP_CONF_STATISTICS
+#define UIP_STATISTICS 0
+#else /* UIP_CONF_STATISTICS */
+#define UIP_STATISTICS UIP_CONF_STATISTICS
+#endif /* UIP_CONF_STATISTICS */
+
+/**
+ * Determines if logging of certain events should be compiled in.
+ *
+ * This is useful mostly for debugging. The function uip_log()
+ * must be implemented to suit the architecture of the project, if
+ * logging is turned on.
+ *
+ * \hideinitializer
+ */
+#ifndef UIP_CONF_LOGGING
+#define UIP_LOGGING 0
+#else /* UIP_CONF_LOGGING */
+#define UIP_LOGGING UIP_CONF_LOGGING
+#endif /* UIP_CONF_LOGGING */
+
+/**
+ * Broadcast support.
+ *
+ * This flag configures IP broadcast support. This is useful only
+ * together with UDP.
+ *
+ * \hideinitializer
+ *
+ */
+#ifndef UIP_CONF_BROADCAST
+#define UIP_BROADCAST 0
+#else /* UIP_CONF_BROADCAST */
+#define UIP_BROADCAST UIP_CONF_BROADCAST
+#endif /* UIP_CONF_BROADCAST */
+
+/**
+ * Print out a uIP log message.
+ *
+ * This function must be implemented by the module that uses uIP, and
+ * is called by uIP whenever a log message is generated.
+ */
+void uip_log( char *msg );
+
+/**
+ * The link level header length.
+ *
+ * This is the offset into the uip_buf where the IP header can be
+ * found. For Ethernet, this should be set to 14. For SLIP, this
+ * should be set to 0.
+ *
+ * \note we probably won't use this constant for other link layers than
+ * ethernet as they have variable header length (this is due to variable
+ * number and type of address fields and to optional security features)
+ * E.g.: 802.15.4 -> 2 + (1/2*4/8) + 0/5/6/10/14
+ * 802.11 -> 4 + (6*3/4) + 2
+ * \hideinitializer
+ */
+#ifdef UIP_CONF_LLH_LEN
+#define UIP_LLH_LEN UIP_CONF_LLH_LEN
+#else /* UIP_LLH_LEN */
+#define UIP_LLH_LEN 14
+#endif /* UIP_CONF_LLH_LEN */
+
+/** @} */
+
+/*------------------------------------------------------------------------------*/
+
+/**
+ * \defgroup uipoptcpu CPU architecture configuration
+ * @{
+ *
+ * The CPU architecture configuration is where the endianess of the
+ * CPU on which uIP is to be run is specified. Most CPUs today are
+ * little endian, and the most notable exception are the Motorolas
+ * which are big endian. The BYTE_ORDER macro should be changed to
+ * reflect the CPU architecture on which uIP is to be run.
+ */
+
+/**
+ * The byte order of the CPU architecture on which uIP is to be run.
+ *
+ * This option can be either UIP_BIG_ENDIAN (Motorola byte order) or
+ * UIP_LITTLE_ENDIAN (Intel byte order).
+ *
+ * \hideinitializer
+ */
+#ifdef UIP_CONF_BYTE_ORDER
+#define UIP_BYTE_ORDER UIP_CONF_BYTE_ORDER
+#else /* UIP_CONF_BYTE_ORDER */
+#define UIP_BYTE_ORDER UIP_LITTLE_ENDIAN
+#endif /* UIP_CONF_BYTE_ORDER */
+
+/** @} */
+
+/*------------------------------------------------------------------------------*/
+
+/**
+ * \defgroup uipoptapp Application specific configurations
+ * @{
+ *
+ * An uIP application is implemented using a single application
+ * function that is called by uIP whenever a TCP/IP event occurs. The
+ * name of this function must be registered with uIP at compile time
+ * using the UIP_APPCALL definition.
+ *
+ * uIP applications can store the application state within the
+ * uip_conn structure by specifying the type of the application
+ * structure by typedef:ing the type uip_tcp_appstate_t and uip_udp_appstate_t.
+ *
+ * The file containing the definitions must be included in the
+ * uipopt.h file.
+ *
+ * The following example illustrates how this can look.
+ \code
+
+ void httpd_appcall(void);
+ #define UIP_APPCALL httpd_appcall
+
+ struct httpd_state {
+ u8_t state;
+ u16_t count;
+ char *dataptr;
+ char *script;
+ };
+ typedef struct httpd_state uip_tcp_appstate_t
+ \endcode
+*/
+
+/**
+ * \var #define UIP_APPCALL
+ *
+ * The name of the application function that uIP should call in
+ * response to TCP/IP events.
+ *
+ */
+
+/**
+ * \var typedef uip_tcp_appstate_t
+ *
+ * The type of the application state that is to be stored in the
+ * uip_conn structure. This usually is typedef:ed to a struct holding
+ * application state information.
+ */
+
+/**
+ * \var typedef uip_udp_appstate_t
+ *
+ * The type of the application state that is to be stored in the
+ * uip_conn structure. This usually is typedef:ed to a struct holding
+ * application state information.
+ */
+
+/** @} */
+#endif /* __UIPOPT_H__ */
+
+/** @} */
+
+/** @} */
|