From a6163888f3c56123b1db313743c6147ba498732c Mon Sep 17 00:00:00 2001 From: Yuval Adam Date: Fri, 8 Aug 2014 14:42:07 +0300 Subject: Add third_party libs --- .../Common/ethernet/FreeTCPIP/net/clock-arch.h | 42 + .../Demo/Common/ethernet/FreeTCPIP/net/lc-switch.h | 76 + .../Demo/Common/ethernet/FreeTCPIP/net/lc.h | 131 ++ .../ethernet/FreeTCPIP/net/pack_struct_end.h | 33 + .../ethernet/FreeTCPIP/net/pack_struct_start.h | 34 + .../Demo/Common/ethernet/FreeTCPIP/net/psock.h | 380 ++++ .../Demo/Common/ethernet/FreeTCPIP/net/pt.h | 323 +++ .../Demo/Common/ethernet/FreeTCPIP/net/uip.h | 2184 ++++++++++++++++++++ .../Demo/Common/ethernet/FreeTCPIP/net/uip_arch.h | 138 ++ .../Demo/Common/ethernet/FreeTCPIP/net/uip_arp.h | 149 ++ .../Demo/Common/ethernet/FreeTCPIP/net/uipopt.h | 695 +++++++ 11 files changed, 4185 insertions(+) create mode 100644 third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/clock-arch.h create mode 100644 third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/lc-switch.h create mode 100644 third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/lc.h create mode 100644 third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/pack_struct_end.h create mode 100644 third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/pack_struct_start.h create mode 100644 third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/psock.h create mode 100644 third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/pt.h create mode 100644 third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/uip.h create mode 100644 third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/uip_arch.h create mode 100644 third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/uip_arp.h create mode 100644 third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/uipopt.h (limited to 'third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net') diff --git a/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/clock-arch.h b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/clock-arch.h new file mode 100644 index 0000000..73d32e2 --- /dev/null +++ b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/clock-arch.h @@ -0,0 +1,42 @@ +/* + * Copyright (c) 2006, Swedish Institute of Computer Science. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Institute nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * This file is part of the uIP TCP/IP stack + * + * $Id: clock-arch.h,v 1.2 2006/06/12 08:00:31 adam Exp $ + */ + +#ifndef __CLOCK_ARCH_H__ +#define __CLOCK_ARCH_H__ + +#include "FreeRTOS.h" + +typedef portTickType clock_time_t; +#define CLOCK_CONF_SECOND configTICK_RATE_HZ + +#endif /* __CLOCK_ARCH_H__ */ diff --git a/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/lc-switch.h b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/lc-switch.h new file mode 100644 index 0000000..17c8811 --- /dev/null +++ b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/lc-switch.h @@ -0,0 +1,76 @@ +/* + * Copyright (c) 2004-2005, Swedish Institute of Computer Science. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Institute nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * This file is part of the uIP TCP/IP stack + * + * Author: Adam Dunkels + * + * $Id: lc-switch.h,v 1.2 2006/06/12 08:00:30 adam Exp $ + */ + +/** + * \addtogroup lc + * @{ + */ + +/** + * \file + * Implementation of local continuations based on switch() statment + * \author Adam Dunkels + * + * This implementation of local continuations uses the C switch() + * statement to resume execution of a function somewhere inside the + * function's body. The implementation is based on the fact that + * switch() statements are able to jump directly into the bodies of + * control structures such as if() or while() statmenets. + * + * This implementation borrows heavily from Simon Tatham's coroutines + * implementation in C: + * http://www.chiark.greenend.org.uk/~sgtatham/coroutines.html + */ + +#ifndef __LC_SWITCH_H__ +#define __LC_SWTICH_H__ + +/* WARNING! lc implementation using switch() does not work if an + LC_SET() is done within another switch() statement! */ + +/** \hideinitializer */ +typedef unsigned short lc_t; + +#define LC_INIT(s) s = 0; + +#define LC_RESUME(s) switch(s) { case 0: + +#define LC_SET(s) s = __LINE__; case __LINE__: + +#define LC_END(s) } + +#endif /* __LC_SWITCH_H__ */ + +/** @} */ diff --git a/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/lc.h b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/lc.h new file mode 100644 index 0000000..3ad83cd --- /dev/null +++ b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/lc.h @@ -0,0 +1,131 @@ +/* + * Copyright (c) 2004-2005, Swedish Institute of Computer Science. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Institute nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * This file is part of the uIP TCP/IP stack + * + * Author: Adam Dunkels + * + * $Id: lc.h,v 1.2 2006/06/12 08:00:30 adam Exp $ + */ + +/** + * \addtogroup pt + * @{ + */ + +/** + * \defgroup lc Local continuations + * @{ + * + * Local continuations form the basis for implementing protothreads. A + * local continuation can be set in a specific function to + * capture the state of the function. After a local continuation has + * been set can be resumed in order to restore the state of the + * function at the point where the local continuation was set. + * + * + */ + +/** + * \file lc.h + * Local continuations + * \author + * Adam Dunkels + * + */ + +#ifdef DOXYGEN +/** + * Initialize a local continuation. + * + * This operation initializes the local continuation, thereby + * unsetting any previously set continuation state. + * + * \hideinitializer + */ +#define LC_INIT(lc) + +/** + * Set a local continuation. + * + * The set operation saves the state of the function at the point + * where the operation is executed. As far as the set operation is + * concerned, the state of the function does not include the + * call-stack or local (automatic) variables, but only the program + * counter and such CPU registers that needs to be saved. + * + * \hideinitializer + */ +#define LC_SET(lc) + +/** + * Resume a local continuation. + * + * The resume operation resumes a previously set local continuation, thus + * restoring the state in which the function was when the local + * continuation was set. If the local continuation has not been + * previously set, the resume operation does nothing. + * + * \hideinitializer + */ +#define LC_RESUME(lc) + +/** + * Mark the end of local continuation usage. + * + * The end operation signifies that local continuations should not be + * used any more in the function. This operation is not needed for + * most implementations of local continuation, but is required by a + * few implementations. + * + * \hideinitializer + */ +#define LC_END(lc) + +/** + * \var typedef lc_t; + * + * The local continuation type. + * + * \hideinitializer + */ +#endif /* DOXYGEN */ + +#ifndef __LC_H__ +#define __LC_H__ + +#ifdef LC_CONF_INCLUDE +#include LC_CONF_INCLUDE +#else +#include "lc-switch.h" +#endif /* LC_CONF_INCLUDE */ + +#endif /* __LC_H__ */ + +/** @} */ +/** @} */ diff --git a/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/pack_struct_end.h b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/pack_struct_end.h new file mode 100644 index 0000000..a23febe --- /dev/null +++ b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/pack_struct_end.h @@ -0,0 +1,33 @@ +#ifdef __GNUC__ + __attribute__( (packed) ); +#endif + +#ifdef _SH + #ifdef __RENESAS__ + ; + #pragma unpack + #endif +#endif + +#ifdef __RX + #ifdef __RENESAS__ + ; + /* Nothing to do. */ + #endif +#endif + + +#ifdef __ICCRX__ + ; + #pragma pack() +#endif + +#ifdef __ICCARM__ + ; + #pragma pack() +#endif + + +#ifdef __CC_ARM + ; +#endif diff --git a/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/pack_struct_start.h b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/pack_struct_start.h new file mode 100644 index 0000000..49a4dc9 --- /dev/null +++ b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/pack_struct_start.h @@ -0,0 +1,34 @@ +#ifdef __GNUC__ + +/* Nothing to do here. */ +; +#endif + +/* Used by SH2A port. */ +#ifdef _SH + #ifdef __RENESAS__ + #pragma pack 1 + #endif +#endif + + +#ifdef __RX + #ifdef __RENESAS__ + /* Nothing to do. */ + #endif +#endif + + +#ifdef __ICCRX__ + #pragma pack(1) +#endif + + +#ifdef __ICCARM__ + #pragma pack(1) +#endif + +#ifdef __CC_ARM + __packed +#endif + diff --git a/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/psock.h b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/psock.h new file mode 100644 index 0000000..8d41258 --- /dev/null +++ b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/psock.h @@ -0,0 +1,380 @@ +/* + * Copyright (c) 2004, Swedish Institute of Computer Science. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Institute nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * This file is part of the uIP TCP/IP stack + * + * Author: Adam Dunkels + * + * $Id: psock.h,v 1.3 2006/06/12 08:00:30 adam Exp $ + */ + +/** + * \defgroup psock Protosockets library + * @{ + * + * The protosocket library provides an interface to the uIP stack that is + * similar to the traditional BSD socket interface. Unlike programs + * written for the ordinary uIP event-driven interface, programs + * written with the protosocket library are executed in a sequential + * fashion and does not have to be implemented as explicit state + * machines. + * + * Protosockets only work with TCP connections. + * + * The protosocket library uses \ref pt protothreads to provide + * sequential control flow. This makes the protosockets lightweight in + * terms of memory, but also means that protosockets inherits the + * functional limitations of protothreads. Each protosocket lives only + * within a single function. Automatic variables (stack variables) are + * not retained across a protosocket library function call. + * + * \note Because the protosocket library uses protothreads, local + * variables will not always be saved across a call to a protosocket + * library function. It is therefore advised that local variables are + * used with extreme care. + * + * The protosocket library provides functions for sending data without + * having to deal with retransmissions and acknowledgements, as well + * as functions for reading data without having to deal with data + * being split across more than one TCP segment. + * + * Because each protosocket runs as a protothread, the protosocket has to be + * started with a call to PSOCK_BEGIN() at the start of the function + * in which the protosocket is used. Similarly, the protosocket protothread can + * be terminated by a call to PSOCK_EXIT(). + * + */ + +/** + * \file + * Protosocket library header file + * \author + * Adam Dunkels + * + */ + +#ifndef __PSOCK_H__ +#define __PSOCK_H__ + +#include "uipopt.h" +#include "pt.h" + + /* + * The structure that holds the state of a buffer. + * + * This structure holds the state of a uIP buffer. The structure has + * no user-visible elements, but is used through the functions + * provided by the library. + * + */ +struct psock_buf { + u8_t *ptr; + unsigned short left; +}; + +/** + * The representation of a protosocket. + * + * The protosocket structrure is an opaque structure with no user-visible + * elements. + */ +struct psock { + struct pt pt, psockpt; /* Protothreads - one that's using the psock + functions, and one that runs inside the + psock functions. */ + const u8_t *sendptr; /* Pointer to the next data to be sent. */ + u8_t *readptr; /* Pointer to the next data to be read. */ + + char *bufptr; /* Pointer to the buffer used for buffering + incoming data. */ + + u16_t sendlen; /* The number of bytes left to be sent. */ + u16_t readlen; /* The number of bytes left to be read. */ + + struct psock_buf buf; /* The structure holding the state of the + input buffer. */ + unsigned int bufsize; /* The size of the input buffer. */ + + unsigned char state; /* The state of the protosocket. */ +}; + +void psock_init(struct psock *psock, char *buffer, unsigned int buffersize); +/** + * Initialize a protosocket. + * + * This macro initializes a protosocket and must be called before the + * protosocket is used. The initialization also specifies the input buffer + * for the protosocket. + * + * \param psock (struct psock *) A pointer to the protosocket to be + * initialized + * + * \param buffer (char *) A pointer to the input buffer for the + * protosocket. + * + * \param buffersize (unsigned int) The size of the input buffer. + * + * \hideinitializer + */ +#define PSOCK_INIT(psock, buffer, buffersize) \ + psock_init(psock, buffer, buffersize) + +/** + * Start the protosocket protothread in a function. + * + * This macro starts the protothread associated with the protosocket and + * must come before other protosocket calls in the function it is used. + * + * \param psock (struct psock *) A pointer to the protosocket to be + * started. + * + * \hideinitializer + */ +#define PSOCK_BEGIN(psock) PT_BEGIN(&((psock)->pt)) + +PT_THREAD(psock_send(struct psock *psock, const char *buf, unsigned int len)); +/** + * Send data. + * + * This macro sends data over a protosocket. The protosocket protothread blocks + * until all data has been sent and is known to have been received by + * the remote end of the TCP connection. + * + * \param psock (struct psock *) A pointer to the protosocket over which + * data is to be sent. + * + * \param data (char *) A pointer to the data that is to be sent. + * + * \param datalen (unsigned int) The length of the data that is to be + * sent. + * + * \hideinitializer + */ +#define PSOCK_SEND(psock, data, datalen) \ + PT_WAIT_THREAD(&((psock)->pt), psock_send(psock, data, datalen)) + +/** + * \brief Send a null-terminated string. + * \param psock Pointer to the protosocket. + * \param str The string to be sent. + * + * This function sends a null-terminated string over the + * protosocket. + * + * \hideinitializer + */ +#define PSOCK_SEND_STR(psock, str) \ + PT_WAIT_THREAD(&((psock)->pt), psock_send(psock, str, strlen(str))) + +PT_THREAD(psock_generator_send(struct psock *psock, + unsigned short (*f)(void *), void *arg)); + +/** + * \brief Generate data with a function and send it + * \param psock Pointer to the protosocket. + * \param generator Pointer to the generator function + * \param arg Argument to the generator function + * + * This function generates data and sends it over the + * protosocket. This can be used to dynamically generate + * data for a transmission, instead of generating the data + * in a buffer beforehand. This function reduces the need for + * buffer memory. The generator function is implemented by + * the application, and a pointer to the function is given + * as an argument with the call to PSOCK_GENERATOR_SEND(). + * + * The generator function should place the generated data + * directly in the uip_appdata buffer, and return the + * length of the generated data. The generator function is + * called by the protosocket layer when the data first is + * sent, and once for every retransmission that is needed. + * + * \hideinitializer + */ +#define PSOCK_GENERATOR_SEND(psock, generator, arg) \ + PT_WAIT_THREAD(&((psock)->pt), \ + psock_generator_send(psock, generator, arg)) + + +/** + * Close a protosocket. + * + * This macro closes a protosocket and can only be called from within the + * protothread in which the protosocket lives. + * + * \param psock (struct psock *) A pointer to the protosocket that is to + * be closed. + * + * \hideinitializer + */ +#define PSOCK_CLOSE(psock) uip_close() + +PT_THREAD(psock_readbuf(struct psock *psock)); +/** + * Read data until the buffer is full. + * + * This macro will block waiting for data and read the data into the + * input buffer specified with the call to PSOCK_INIT(). Data is read + * until the buffer is full.. + * + * \param psock (struct psock *) A pointer to the protosocket from which + * data should be read. + * + * \hideinitializer + */ +#define PSOCK_READBUF(psock) \ + PT_WAIT_THREAD(&((psock)->pt), psock_readbuf(psock)) + +PT_THREAD(psock_readto(struct psock *psock, unsigned char c)); +/** + * Read data up to a specified character. + * + * This macro will block waiting for data and read the data into the + * input buffer specified with the call to PSOCK_INIT(). Data is only + * read until the specifieed character appears in the data stream. + * + * \param psock (struct psock *) A pointer to the protosocket from which + * data should be read. + * + * \param c (char) The character at which to stop reading. + * + * \hideinitializer + */ +#define PSOCK_READTO(psock, c) \ + PT_WAIT_THREAD(&((psock)->pt), psock_readto(psock, c)) + +/** + * The length of the data that was previously read. + * + * This macro returns the length of the data that was previously read + * using PSOCK_READTO() or PSOCK_READ(). + * + * \param psock (struct psock *) A pointer to the protosocket holding the data. + * + * \hideinitializer + */ +#define PSOCK_DATALEN(psock) psock_datalen(psock) + +u16_t psock_datalen(struct psock *psock); + +/** + * Exit the protosocket's protothread. + * + * This macro terminates the protothread of the protosocket and should + * almost always be used in conjunction with PSOCK_CLOSE(). + * + * \sa PSOCK_CLOSE_EXIT() + * + * \param psock (struct psock *) A pointer to the protosocket. + * + * \hideinitializer + */ +#define PSOCK_EXIT(psock) PT_EXIT(&((psock)->pt)) + +/** + * Close a protosocket and exit the protosocket's protothread. + * + * This macro closes a protosocket and exits the protosocket's protothread. + * + * \param psock (struct psock *) A pointer to the protosocket. + * + * \hideinitializer + */ +#define PSOCK_CLOSE_EXIT(psock) \ + do { \ + PSOCK_CLOSE(psock); \ + PSOCK_EXIT(psock); \ + } while(0) + +/** + * Declare the end of a protosocket's protothread. + * + * This macro is used for declaring that the protosocket's protothread + * ends. It must always be used together with a matching PSOCK_BEGIN() + * macro. + * + * \param psock (struct psock *) A pointer to the protosocket. + * + * \hideinitializer + */ +#define PSOCK_END(psock) PT_END(&((psock)->pt)) + +char psock_newdata(struct psock *s); + +/** + * Check if new data has arrived on a protosocket. + * + * This macro is used in conjunction with the PSOCK_WAIT_UNTIL() + * macro to check if data has arrived on a protosocket. + * + * \param psock (struct psock *) A pointer to the protosocket. + * + * \hideinitializer + */ +#define PSOCK_NEWDATA(psock) psock_newdata(psock) + +/** + * Wait until a condition is true. + * + * This macro blocks the protothread until the specified condition is + * true. The macro PSOCK_NEWDATA() can be used to check if new data + * arrives when the protosocket is waiting. + * + * Typically, this macro is used as follows: + * + \code + PT_THREAD(thread(struct psock *s, struct timer *t)) + { + PSOCK_BEGIN(s); + + PSOCK_WAIT_UNTIL(s, PSOCK_NEWADATA(s) || timer_expired(t)); + + if(PSOCK_NEWDATA(s)) { + PSOCK_READTO(s, '\n'); + } else { + handle_timed_out(s); + } + + PSOCK_END(s); + } + \endcode + * + * \param psock (struct psock *) A pointer to the protosocket. + * \param condition The condition to wait for. + * + * \hideinitializer + */ +#define PSOCK_WAIT_UNTIL(psock, condition) \ + PT_WAIT_UNTIL(&((psock)->pt), (condition)); + +#define PSOCK_WAIT_THREAD(psock, condition) \ + PT_WAIT_THREAD(&((psock)->pt), (condition)) + +#endif /* __PSOCK_H__ */ + +/** @} */ diff --git a/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/pt.h b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/pt.h new file mode 100644 index 0000000..00ddd44 --- /dev/null +++ b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/pt.h @@ -0,0 +1,323 @@ +/* + * Copyright (c) 2004-2005, Swedish Institute of Computer Science. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Institute nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * This file is part of the uIP TCP/IP stack + * + * Author: Adam Dunkels + * + * $Id: pt.h,v 1.2 2006/06/12 08:00:30 adam Exp $ + */ + +/** + * \addtogroup pt + * @{ + */ + +/** + * \file + * Protothreads implementation. + * \author + * Adam Dunkels + * + */ + +#ifndef __PT_H__ +#define __PT_H__ + +#include "lc.h" + +struct pt { + lc_t lc; +}; + +#define PT_WAITING 0 +#define PT_EXITED 1 +#define PT_ENDED 2 +#define PT_YIELDED 3 + +/** + * \name Initialization + * @{ + */ + +/** + * Initialize a protothread. + * + * Initializes a protothread. Initialization must be done prior to + * starting to execute the protothread. + * + * \param pt A pointer to the protothread control structure. + * + * \sa PT_SPAWN() + * + * \hideinitializer + */ +#define PT_INIT(pt) LC_INIT((pt)->lc) + +/** @} */ + +/** + * \name Declaration and definition + * @{ + */ + +/** + * Declaration of a protothread. + * + * This macro is used to declare a protothread. All protothreads must + * be declared with this macro. + * + * \param name_args The name and arguments of the C function + * implementing the protothread. + * + * \hideinitializer + */ +#define PT_THREAD(name_args) char name_args + +/** + * Declare the start of a protothread inside the C function + * implementing the protothread. + * + * This macro is used to declare the starting point of a + * protothread. It should be placed at the start of the function in + * which the protothread runs. All C statements above the PT_BEGIN() + * invokation will be executed each time the protothread is scheduled. + * + * \param pt A pointer to the protothread control structure. + * + * \hideinitializer + */ +#define PT_BEGIN(pt) { char PT_YIELD_FLAG = 1; LC_RESUME((pt)->lc) + +/** + * Declare the end of a protothread. + * + * This macro is used for declaring that a protothread ends. It must + * always be used together with a matching PT_BEGIN() macro. + * + * \param pt A pointer to the protothread control structure. + * + * \hideinitializer + */ +#define PT_END(pt) LC_END((pt)->lc); PT_YIELD_FLAG = 0; \ + PT_INIT(pt); return PT_ENDED; } + +/** @} */ + +/** + * \name Blocked wait + * @{ + */ + +/** + * Block and wait until condition is true. + * + * This macro blocks the protothread until the specified condition is + * true. + * + * \param pt A pointer to the protothread control structure. + * \param condition The condition. + * + * \hideinitializer + */ +#define PT_WAIT_UNTIL(pt, condition) \ + do { \ + LC_SET((pt)->lc); \ + if(!(condition)) { \ + return PT_WAITING; \ + } \ + } while(0) + +/** + * Block and wait while condition is true. + * + * This function blocks and waits while condition is true. See + * PT_WAIT_UNTIL(). + * + * \param pt A pointer to the protothread control structure. + * \param cond The condition. + * + * \hideinitializer + */ +#define PT_WAIT_WHILE(pt, cond) PT_WAIT_UNTIL((pt), !(cond)) + +/** @} */ + +/** + * \name Hierarchical protothreads + * @{ + */ + +/** + * Block and wait until a child protothread completes. + * + * This macro schedules a child protothread. The current protothread + * will block until the child protothread completes. + * + * \note The child protothread must be manually initialized with the + * PT_INIT() function before this function is used. + * + * \param pt A pointer to the protothread control structure. + * \param thread The child protothread with arguments + * + * \sa PT_SPAWN() + * + * \hideinitializer + */ +#define PT_WAIT_THREAD(pt, thread) PT_WAIT_WHILE((pt), PT_SCHEDULE(thread)) + +/** + * Spawn a child protothread and wait until it exits. + * + * This macro spawns a child protothread and waits until it exits. The + * macro can only be used within a protothread. + * + * \param pt A pointer to the protothread control structure. + * \param child A pointer to the child protothread's control structure. + * \param thread The child protothread with arguments + * + * \hideinitializer + */ +#define PT_SPAWN(pt, child, thread) \ + do { \ + PT_INIT((child)); \ + PT_WAIT_THREAD((pt), (thread)); \ + } while(0) + +/** @} */ + +/** + * \name Exiting and restarting + * @{ + */ + +/** + * Restart the protothread. + * + * This macro will block and cause the running protothread to restart + * its execution at the place of the PT_BEGIN() call. + * + * \param pt A pointer to the protothread control structure. + * + * \hideinitializer + */ +#define PT_RESTART(pt) \ + do { \ + PT_INIT(pt); \ + return PT_WAITING; \ + } while(0) + +/** + * Exit the protothread. + * + * This macro causes the protothread to exit. If the protothread was + * spawned by another protothread, the parent protothread will become + * unblocked and can continue to run. + * + * \param pt A pointer to the protothread control structure. + * + * \hideinitializer + */ +#define PT_EXIT(pt) \ + do { \ + PT_INIT(pt); \ + return PT_EXITED; \ + } while(0) + +/** @} */ + +/** + * \name Calling a protothread + * @{ + */ + +/** + * Schedule a protothread. + * + * This function shedules a protothread. The return value of the + * function is non-zero if the protothread is running or zero if the + * protothread has exited. + * + * \param f The call to the C function implementing the protothread to + * be scheduled + * + * \hideinitializer + */ +#define PT_SCHEDULE(f) ((f) == PT_WAITING) + +/** @} */ + +/** + * \name Yielding from a protothread + * @{ + */ + +/** + * Yield from the current protothread. + * + * This function will yield the protothread, thereby allowing other + * processing to take place in the system. + * + * \param pt A pointer to the protothread control structure. + * + * \hideinitializer + */ +#define PT_YIELD(pt) \ + do { \ + PT_YIELD_FLAG = 0; \ + LC_SET((pt)->lc); \ + if(PT_YIELD_FLAG == 0) { \ + return PT_YIELDED; \ + } \ + } while(0) + +/** + * \brief Yield from the protothread until a condition occurs. + * \param pt A pointer to the protothread control structure. + * \param cond The condition. + * + * This function will yield the protothread, until the + * specified condition evaluates to true. + * + * + * \hideinitializer + */ +#define PT_YIELD_UNTIL(pt, cond) \ + do { \ + PT_YIELD_FLAG = 0; \ + LC_SET((pt)->lc); \ + if((PT_YIELD_FLAG == 0) || !(cond)) { \ + return PT_YIELDED; \ + } \ + } while(0) + +/** @} */ + +#endif /* __PT_H__ */ + +/** @} */ diff --git a/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/uip.h b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/uip.h new file mode 100644 index 0000000..3a0ed19 --- /dev/null +++ b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/uip.h @@ -0,0 +1,2184 @@ + + /** + * \addtogroup uip + * @{ + */ + +/** + * \file + * Header file for the uIP TCP/IP stack. + * \author Adam Dunkels + * \author Julien Abeille (IPv6 related code) + * \author Mathilde Durvy (IPv6 related code) + * + * The uIP TCP/IP stack header file contains definitions for a number + * of C macros that are used by uIP programs as well as internal uIP + * structures, TCP/IP header structures and function declarations. + * + */ + +/* + * Copyright (c) 2001-2003, Adam Dunkels. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote + * products derived from this software without specific prior + * written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * This file is part of the uIP TCP/IP stack. + * + * $Id: uip.h,v 1.24 2009/04/06 13:18:50 nvt-se Exp $ + * + */ +#ifndef __UIP_H__ +#define __UIP_H__ + +#include "net/uipopt.h" +#include "uip-conf.h" + +/** + * Representation of an IP address. + * + */ +#if UIP_CONF_IPV6 != 0 + typedef union uip_ip6addr_t + { + u8_t u8[16]; /* Initializer, must come first!!! */ + u16_t u16[8]; + } uip_ip6addr_t; + + typedef uip_ip6addr_t uip_ipaddr_t; +#else /* UIP_CONF_IPV6 */ + #ifdef __CC_ARM + __packed /* The ARM compiler insists on this being packed, but with other compilers packing it generates a warning as it will be packed anyway. */ + #endif + + typedef union uip_ip4addr_t + { + u8_t u8[4]; /* Initializer, must come first!!! */ + u16_t u16[2]; + } uip_ip4addr_t; + typedef uip_ip4addr_t uip_ipaddr_t; +#endif /* UIP_CONF_IPV6 */ + +/*---------------------------------------------------------------------------*/ + +/** \brief 16 bit 802.15.4 address */ +struct uip_802154_shortaddr +{ + u8_t addr[2]; +}; + +/** \brief 64 bit 802.15.4 address */ +struct uip_802154_longaddr +{ + u8_t addr[8]; +}; + +/** \brief 802.11 address */ +struct uip_80211_addr +{ + u8_t addr[6]; +}; + +/** \brief 802.3 address */ +#include "net/pack_struct_start.h" +struct uip_eth_addr +{ + u8_t addr[6]; +} +#include "net/pack_struct_end.h" + +#ifdef UIP_CONF_LL_802154 + + /** \brief 802.15.4 address */ + typedef struct uip_802154_longaddr uip_lladdr_t; + #define UIP_802154_SHORTADDR_LEN 2 + #define UIP_802154_LONGADDR_LEN 8 + #define UIP_LLADDR_LEN UIP_802154_LONGADDR_LEN +#else /*UIP_CONF_LL_802154*/ + #ifdef UIP_CONF_LL_80211 + /** \brief 802.11 address */ + typedef struct uip_80211_addr uip_lladdr_t; + #define UIP_LLADDR_LEN 6 + #else /*UIP_CONF_LL_80211*/ + + /** \brief Ethernet address */ + typedef struct uip_eth_addr uip_lladdr_t; + + #define UIP_LLADDR_LEN 6 + #endif /*UIP_CONF_LL_80211*/ +#endif /*UIP_CONF_LL_802154*/ + +//_RB_#include "net/tcpip.h" + +/*---------------------------------------------------------------------------*/ + +/* First, the functions that should be called from the + * system. Initialization, the periodic timer, and incoming packets are + * handled by the following three functions. + */ + +/** + * \defgroup uipconffunc uIP configuration functions + * @{ + * + * The uIP configuration functions are used for setting run-time + * parameters in uIP such as IP addresses. + */ + +/** + * Set the IP address of this host. + * + * The IP address is represented as a 4-byte array where the first + * octet of the IP address is put in the first member of the 4-byte + * array. + * + * Example: + \code + + uip_ipaddr_t addr; + + uip_ipaddr(&addr, 192,168,1,2); + uip_sethostaddr(&addr); + + \endcode + * \param addr A pointer to an IP address of type uip_ipaddr_t; + * + * \sa uip_ipaddr() + * + * \hideinitializer + */ +#define uip_sethostaddr( addr ) uip_ipaddr_copy( &uip_hostaddr, (addr) ) + +/** + * Get the IP address of this host. + * + * The IP address is represented as a 4-byte array where the first + * octet of the IP address is put in the first member of the 4-byte + * array. + * + * Example: + \code + uip_ipaddr_t hostaddr; + + uip_gethostaddr(&hostaddr); + \endcode + * \param addr A pointer to a uip_ipaddr_t variable that will be + * filled in with the currently configured IP address. + * + * \hideinitializer + */ +#define uip_gethostaddr( addr ) uip_ipaddr_copy( (addr), &uip_hostaddr ) + +/** + * Set the default router's IP address. + * + * \param addr A pointer to a uip_ipaddr_t variable containing the IP + * address of the default router. + * + * \sa uip_ipaddr() + * + * \hideinitializer + */ +#define uip_setdraddr( addr ) uip_ipaddr_copy( &uip_draddr, (addr) ) + +/** + * Set the netmask. + * + * \param addr A pointer to a uip_ipaddr_t variable containing the IP + * address of the netmask. + * + * \sa uip_ipaddr() + * + * \hideinitializer + */ +#define uip_setnetmask( addr ) uip_ipaddr_copy( &uip_netmask, (addr) ) + +/** + * Get the default router's IP address. + * + * \param addr A pointer to a uip_ipaddr_t variable that will be + * filled in with the IP address of the default router. + * + * \hideinitializer + */ +#define uip_getdraddr( addr ) uip_ipaddr_copy( (addr), &uip_draddr ) + +/** + * Get the netmask. + * + * \param addr A pointer to a uip_ipaddr_t variable that will be + * filled in with the value of the netmask. + * + * \hideinitializer + */ +#define uip_getnetmask( addr ) uip_ipaddr_copy( (addr), &uip_netmask ) + +/** @} */ + +/** + * \defgroup uipinit uIP initialization functions + * @{ + * + * The uIP initialization functions are used for booting uIP. + */ + +/** + * uIP initialization function. + * + * This function should be called at boot up to initilize the uIP + * TCP/IP stack. + */ +void uip_init( void ); + +/** + * uIP initialization function. + * + * This function may be used at boot time to set the initial ip_id. + */ +void uip_setipid( u16_t id ); + +/** @} */ + +/** + * \defgroup uipdevfunc uIP device driver functions + * @{ + * + * These functions are used by a network device driver for interacting + * with uIP. + */ + +/** + * Process an incoming packet. + * + * This function should be called when the device driver has received + * a packet from the network. The packet from the device driver must + * be present in the uip_buf buffer, and the length of the packet + * should be placed in the uip_len variable. + * + * When the function returns, there may be an outbound packet placed + * in the uip_buf packet buffer. If so, the uip_len variable is set to + * the length of the packet. If no packet is to be sent out, the + * uip_len variable is set to 0. + * + * The usual way of calling the function is presented by the source + * code below. + \code + uip_len = devicedriver_poll(); + if(uip_len > 0) { + uip_input(); + if(uip_len > 0) { + devicedriver_send(); + } + } + \endcode + * + * \note If you are writing a uIP device driver that needs ARP + * (Address Resolution Protocol), e.g., when running uIP over + * Ethernet, you will need to call the uIP ARP code before calling + * this function: + \code + #define BUF ((struct uip_eth_hdr *)&uip_buf[0]) + uip_len = ethernet_devicedrver_poll(); + if(uip_len > 0) { + if(BUF->type == HTONS(UIP_ETHTYPE_IP)) { + uip_arp_ipin(); + uip_input(); + if(uip_len > 0) { + uip_arp_out(); + ethernet_devicedriver_send(); + } + } else if(BUF->type == HTONS(UIP_ETHTYPE_ARP)) { + uip_arp_arpin(); + if(uip_len > 0) { + ethernet_devicedriver_send(); + } + } + \endcode + * + * \hideinitializer + */ +#define uip_input() uip_process( UIP_DATA ) + +/** + * Periodic processing for a connection identified by its number. + * + * This function does the necessary periodic processing (timers, + * polling) for a uIP TCP conneciton, and should be called when the + * periodic uIP timer goes off. It should be called for every + * connection, regardless of whether they are open of closed. + * + * When the function returns, it may have an outbound packet waiting + * for service in the uIP packet buffer, and if so the uip_len + * variable is set to a value larger than zero. The device driver + * should be called to send out the packet. + * + * The usual way of calling the function is through a for() loop like + * this: + \code + for(i = 0; i < UIP_CONNS; ++i) { + uip_periodic(i); + if(uip_len > 0) { + devicedriver_send(); + } + } + \endcode + * + * \note If you are writing a uIP device driver that needs ARP + * (Address Resolution Protocol), e.g., when running uIP over + * Ethernet, you will need to call the uip_arp_out() function before + * calling the device driver: + \code + for(i = 0; i < UIP_CONNS; ++i) { + uip_periodic(i); + if(uip_len > 0) { + uip_arp_out(); + ethernet_devicedriver_send(); + } + } + \endcode + * + * \param conn The number of the connection which is to be periodically polled. + * + * \hideinitializer + */ +#ifdef UIP_TCP +#define uip_periodic( conn ) \ + do \ + { \ + uip_conn = &uip_conns[conn]; \ + uip_process( UIP_TIMER ); \ + } while( 0 ) + +/** + * + * + */ +#define uip_conn_active( conn ) ( uip_conns[conn].tcpstateflags != UIP_CLOSED ) + +/** + * Perform periodic processing for a connection identified by a pointer + * to its structure. + * + * Same as uip_periodic() but takes a pointer to the actual uip_conn + * struct instead of an integer as its argument. This function can be + * used to force periodic processing of a specific connection. + * + * \param conn A pointer to the uip_conn struct for the connection to + * be processed. + * + * \hideinitializer + */ +#define uip_periodic_conn( conn ) \ + do \ + { \ + uip_conn = conn; \ + uip_process( UIP_TIMER ); \ + } while( 0 ) + +/** + * Request that a particular connection should be polled. + * + * Similar to uip_periodic_conn() but does not perform any timer + * processing. The application is polled for new data. + * + * \param conn A pointer to the uip_conn struct for the connection to + * be processed. + * + * \hideinitializer + */ +#define uip_poll_conn( conn ) \ + do \ + { \ + uip_conn = conn; \ + uip_process( UIP_POLL_REQUEST ); \ + } while( 0 ) +#endif /* UIP_TCP */ + +#ifdef UIP_UDP + +/** + * Periodic processing for a UDP connection identified by its number. + * + * This function is essentially the same as uip_periodic(), but for + * UDP connections. It is called in a similar fashion as the + * uip_periodic() function: + \code + for(i = 0; i < UIP_UDP_CONNS; i++) { + uip_udp_periodic(i); + if(uip_len > 0) { + devicedriver_send(); + } + } + \endcode + * + * \note As for the uip_periodic() function, special care has to be + * taken when using uIP together with ARP and Ethernet: + \code + for(i = 0; i < UIP_UDP_CONNS; i++) { + uip_udp_periodic(i); + if(uip_len > 0) { + uip_arp_out(); + ethernet_devicedriver_send(); + } + } + \endcode + * + * \param conn The number of the UDP connection to be processed. + * + * \hideinitializer + */ +#define uip_udp_periodic( conn ) \ + do \ + { \ + uip_udp_conn = &uip_udp_conns[conn]; \ + uip_process( UIP_UDP_TIMER ); \ + } while( 0 ) + +/** + * Periodic processing for a UDP connection identified by a pointer to + * its structure. + * + * Same as uip_udp_periodic() but takes a pointer to the actual + * uip_conn struct instead of an integer as its argument. This + * function can be used to force periodic processing of a specific + * connection. + * + * \param conn A pointer to the uip_udp_conn struct for the connection + * to be processed. + * + * \hideinitializer + */ +#define uip_udp_periodic_conn( conn ) \ + do \ + { \ + uip_udp_conn = conn; \ + uip_process( UIP_UDP_TIMER ); \ + } while( 0 ) +#endif /* UIP_UDP */ + + /** \brief Abandon the reassembly of the current packet */ + void uip_reass_over( void ); + +/** + * The uIP packet buffer. + * + * The uip_buf array is used to hold incoming and outgoing + * packets. The device driver should place incoming data into this + * buffer. When sending data, the device driver should read the link + * level headers and the TCP/IP headers from this buffer. The size of + * the link level headers is configured by the UIP_LLH_LEN define. + * + * \note The application data need not be placed in this buffer, so + * the device driver must read it from the place pointed to by the + * uip_appdata pointer as illustrated by the following example: + \code + void + devicedriver_send(void) + { + hwsend(&uip_buf[0], UIP_LLH_LEN); + if(uip_len <= UIP_LLH_LEN + UIP_TCPIP_HLEN) { + hwsend(&uip_buf[UIP_LLH_LEN], uip_len - UIP_LLH_LEN); + } else { + hwsend(&uip_buf[UIP_LLH_LEN], UIP_TCPIP_HLEN); + hwsend(uip_appdata, uip_len - UIP_TCPIP_HLEN - UIP_LLH_LEN); + } + } + \endcode +*/ +#ifndef UIP_CONF_EXTERNAL_BUFFER +CCIF extern u8_t uip_buf[UIP_BUFSIZE + 2]; +#else +CCIF extern unsigned char *uip_buf; +#endif + +/** @} */ + +/*---------------------------------------------------------------------------*/ + +/* Functions that are used by the uIP application program. Opening and + * closing connections, sending and receiving data, etc. is all + * handled by the functions below. + */ + +/** + * \defgroup uipappfunc uIP application functions + * @{ + * + * Functions used by an application running of top of uIP. + */ + +/** + * Start listening to the specified port. + * + * \note Since this function expects the port number in network byte + * order, a conversion using HTONS() or htons() is necessary. + * + \code + uip_listen(HTONS(80)); + \endcode + * + * \param port A 16-bit port number in network byte order. + */ +void uip_listen( u16_t port ); + +/** + * Stop listening to the specified port. + * + * \note Since this function expects the port number in network byte + * order, a conversion using HTONS() or htons() is necessary. + * + \code + uip_unlisten(HTONS(80)); + \endcode + * + * \param port A 16-bit port number in network byte order. + */ +void uip_unlisten( u16_t port ); + +/** + * Connect to a remote host using TCP. + * + * This function is used to start a new connection to the specified + * port on the specified host. It allocates a new connection identifier, + * sets the connection to the SYN_SENT state and sets the + * retransmission timer to 0. This will cause a TCP SYN segment to be + * sent out the next time this connection is periodically processed, + * which usually is done within 0.5 seconds after the call to + * uip_connect(). + * + * \note This function is available only if support for active open + * has been configured by defining UIP_ACTIVE_OPEN to 1 in uipopt.h. + * + * \note Since this function requires the port number to be in network + * byte order, a conversion using HTONS() or htons() is necessary. + * + \code + uip_ipaddr_t ipaddr; + + uip_ipaddr(&ipaddr, 192,168,1,2); + uip_connect(&ipaddr, HTONS(80)); + \endcode + * + * \param ripaddr The IP address of the remote host. + * + * \param port A 16-bit port number in network byte order. + * + * \return A pointer to the uIP connection identifier for the new connection, + * or NULL if no connection could be allocated. + * + */ +struct uip_conn *uip_connect( uip_ipaddr_t *ripaddr, u16_t port ); + +/** + * \internal + * + * Check if a connection has outstanding (i.e., unacknowledged) data. + * + * \param conn A pointer to the uip_conn structure for the connection. + * + * \hideinitializer + */ +#define uip_outstanding( conn ) ( (conn)->len ) + +/** + * Send data on the current connection. + * + * This function is used to send out a single segment of TCP + * data. Only applications that have been invoked by uIP for event + * processing can send data. + * + * The amount of data that actually is sent out after a call to this + * function is determined by the maximum amount of data TCP allows. uIP + * will automatically crop the data so that only the appropriate + * amount of data is sent. The function uip_mss() can be used to query + * uIP for the amount of data that actually will be sent. + * + * \note This function does not guarantee that the sent data will + * arrive at the destination. If the data is lost in the network, the + * application will be invoked with the uip_rexmit() event being + * set. The application will then have to resend the data using this + * function. + * + * \param data A pointer to the data which is to be sent. + * + * \param len The maximum amount of data bytes to be sent. + * + * \hideinitializer + */ +CCIF void uip_send( const void *data, int len ); + +/** + * The length of any incoming data that is currently available (if available) + * in the uip_appdata buffer. + * + * The test function uip_data() must first be used to check if there + * is any data available at all. + * + * \hideinitializer + */ + +/*void uip_datalen(void);*/ +#define uip_datalen() uip_len + +/** + * The length of any out-of-band data (urgent data) that has arrived + * on the connection. + * + * \note The configuration parameter UIP_URGDATA must be set for this + * function to be enabled. + * + * \hideinitializer + */ +#define uip_urgdatalen() uip_urglen + +/** + * Close the current connection. + * + * This function will close the current connection in a nice way. + * + * \hideinitializer + */ +#define uip_close() ( uip_flags = UIP_CLOSE ) + +/** + * Abort the current connection. + * + * This function will abort (reset) the current connection, and is + * usually used when an error has occurred that prevents using the + * uip_close() function. + * + * \hideinitializer + */ +#define uip_abort() ( uip_flags = UIP_ABORT ) + +/** + * Tell the sending host to stop sending data. + * + * This function will close our receiver's window so that we stop + * receiving data for the current connection. + * + * \hideinitializer + */ +#define uip_stop() ( uip_conn->tcpstateflags |= UIP_STOPPED ) + +/** + * Find out if the current connection has been previously stopped with + * uip_stop(). + * + * \hideinitializer + */ +#define uip_stopped( conn ) ( (conn)->tcpstateflags & UIP_STOPPED ) + +/** + * Restart the current connection, if is has previously been stopped + * with uip_stop(). + * + * This function will open the receiver's window again so that we + * start receiving data for the current connection. + * + * \hideinitializer + */ +#define uip_restart() \ + do \ + { \ + uip_flags |= UIP_NEWDATA; \ + uip_conn->tcpstateflags &= ~UIP_STOPPED; \ + } while( 0 ) + + /* uIP tests that can be made to determine in what state the current + connection is, and what the application function should do. */ + +/** + * Is the current connection a UDP connection? + * + * This function checks whether the current connection is a UDP connection. + * + * \hideinitializer + * + */ +#define uip_udpconnection() ( uip_conn == NULL ) + +/** + * Is new incoming data available? + * + * Will reduce to non-zero if there is new data for the application + * present at the uip_appdata pointer. The size of the data is + * available through the uip_len variable. + * + * \hideinitializer + */ +#define uip_newdata() ( uip_flags & UIP_NEWDATA ) + +/** + * Has previously sent data been acknowledged? + * + * Will reduce to non-zero if the previously sent data has been + * acknowledged by the remote host. This means that the application + * can send new data. + * + * \hideinitializer + */ +#define uip_acked() ( uip_flags & UIP_ACKDATA ) + +/** + * Has the connection just been connected? + * + * Reduces to non-zero if the current connection has been connected to + * a remote host. This will happen both if the connection has been + * actively opened (with uip_connect()) or passively opened (with + * uip_listen()). + * + * \hideinitializer + */ +#define uip_connected() ( uip_flags & UIP_CONNECTED ) + +/** + * Has the connection been closed by the other end? + * + * Is non-zero if the connection has been closed by the remote + * host. The application may then do the necessary clean-ups. + * + * \hideinitializer + */ +#define uip_closed() ( uip_flags & UIP_CLOSE ) + +/** + * Has the connection been aborted by the other end? + * + * Non-zero if the current connection has been aborted (reset) by the + * remote host. + * + * \hideinitializer + */ +#define uip_aborted() ( uip_flags & UIP_ABORT ) + +/** + * Has the connection timed out? + * + * Non-zero if the current connection has been aborted due to too many + * retransmissions. + * + * \hideinitializer + */ +#define uip_timedout() ( uip_flags & UIP_TIMEDOUT ) + +/** + * Do we need to retransmit previously data? + * + * Reduces to non-zero if the previously sent data has been lost in + * the network, and the application should retransmit it. The + * application should send the exact same data as it did the last + * time, using the uip_send() function. + * + * \hideinitializer + */ +#define uip_rexmit() ( uip_flags & UIP_REXMIT ) + +/** + * Is the connection being polled by uIP? + * + * Is non-zero if the reason the application is invoked is that the + * current connection has been idle for a while and should be + * polled. + * + * The polling event can be used for sending data without having to + * wait for the remote host to send data. + * + * \hideinitializer + */ +#define uip_poll() ( uip_flags & UIP_POLL ) + +/** + * Get the initial maximum segment size (MSS) of the current + * connection. + * + * \hideinitializer + */ +#define uip_initialmss() ( uip_conn->initialmss ) + +/** + * Get the current maximum segment size that can be sent on the current + * connection. + * + * The current maximum segment size that can be sent on the + * connection is computed from the receiver's window and the MSS of + * the connection (which also is available by calling + * uip_initialmss()). + * + * \hideinitializer + */ +#define uip_mss() ( uip_conn->mss ) + /** + * Set up a new UDP connection. + * + * This function sets up a new UDP connection. The function will + * automatically allocate an unused local port for the new + * connection. However, another port can be chosen by using the + * uip_udp_bind() call, after the uip_udp_new() function has been + * called. + * + * Example: + \code + uip_ipaddr_t addr; + struct uip_udp_conn *c; + + uip_ipaddr(&addr, 192,168,2,1); + c = uip_udp_new(&addr, HTONS(12345)); + if(c != NULL) { + uip_udp_bind(c, HTONS(12344)); + } + \endcode + * \param ripaddr The IP address of the remote host. + * + * \param rport The remote port number in network byte order. + * + * \return The uip_udp_conn structure for the new connection or NULL + * if no connection could be allocated. + */ + struct uip_udp_conn *uip_udp_new( const uip_ipaddr_t *ripaddr, u16_t rport ); + +/** + * Removed a UDP connection. + * + * \param conn A pointer to the uip_udp_conn structure for the connection. + * + * \hideinitializer + */ +#define uip_udp_remove( conn ) ( conn )->lport = 0 + +/** + * Bind a UDP connection to a local port. + * + * \param conn A pointer to the uip_udp_conn structure for the + * connection. + * + * \param port The local port number, in network byte order. + * + * \hideinitializer + */ +#define uip_udp_bind( conn, port ) ( conn )->lport = port + +/** + * Send a UDP datagram of length len on the current connection. + * + * This function can only be called in response to a UDP event (poll + * or newdata). The data must be present in the uip_buf buffer, at the + * place pointed to by the uip_appdata pointer. + * + * \param len The length of the data in the uip_buf buffer. + * + * \hideinitializer + */ +#define uip_udp_send( len ) uip_send( ( char * ) uip_appdata, len ) + +/** @} */ + +/* uIP convenience and converting functions. */ + +/** + * \defgroup uipconvfunc uIP conversion functions + * @{ + * + * These functions can be used for converting between different data + * formats used by uIP. + */ + +/** + * Convert an IP address to four bytes separated by commas. + * + * Example: + \code + uip_ipaddr_t ipaddr; + printf("ipaddr=%d.%d.%d.%d\n", uip_ipaddr_to_quad(&ipaddr)); + \endcode + * + * \param a A pointer to a uip_ipaddr_t. + * \hideinitializer + */ +#define uip_ipaddr_to_quad( a ) ( a )->u8[0], ( a )->u8[1], ( a )->u8[2], ( a )->u8[3] + +/** + * Construct an IP address from four bytes. + * + * This function constructs an IP address of the type that uIP handles + * internally from four bytes. The function is handy for specifying IP + * addresses to use with e.g. the uip_connect() function. + * + * Example: + \code + uip_ipaddr_t ipaddr; + struct uip_conn *c; + + uip_ipaddr(&ipaddr, 192,168,1,2); + c = uip_connect(&ipaddr, HTONS(80)); + \endcode + * + * \param addr A pointer to a uip_ipaddr_t variable that will be + * filled in with the IP address. + * + * \param addr0 The first octet of the IP address. + * \param addr1 The second octet of the IP address. + * \param addr2 The third octet of the IP address. + * \param addr3 The forth octet of the IP address. + * + * \hideinitializer + */ +#define uip_ipaddr( addr, addr0, addr1, addr2, addr3 ) \ + do \ + { \ + ( addr )->u8[0] = addr0; \ + ( addr )->u8[1] = addr1; \ + ( addr )->u8[2] = addr2; \ + ( addr )->u8[3] = addr3; \ + } while( 0 ) + +/** + * Construct an IPv6 address from eight 16-bit words. + * + * This function constructs an IPv6 address. + * + * \hideinitializer + */ +#define uip_ip6addr( addr, addr0, addr1, addr2, addr3, addr4, addr5, addr6, addr7 ) \ + do \ + { \ + ( addr )->u16[0] = HTONS( addr0 ); \ + ( addr )->u16[1] = HTONS( addr1 ); \ + ( addr )->u16[2] = HTONS( addr2 ); \ + ( addr )->u16[3] = HTONS( addr3 ); \ + ( addr )->u16[4] = HTONS( addr4 ); \ + ( addr )->u16[5] = HTONS( addr5 ); \ + ( addr )->u16[6] = HTONS( addr6 ); \ + ( addr )->u16[7] = HTONS( addr7 ); \ + } while( 0 ) /** + * Construct an IPv6 address from eight 8-bit words. + * + * This function constructs an IPv6 address. + * + * \hideinitializer + */ +#define uip_ip6addr_u8 ( addr, addr0, addr1, addr2, addr3, addr4, addr5, addr6, addr7, addr8, addr9, addr10, addr11, addr12, addr13, addr14, \ + addr15 ) do \ + {\ + ( addr )->u8[0] = addr0; \ + ( addr )->u8[1] = addr1; \ + ( addr )->u8[2] = addr2; \ + ( addr )->u8[3] = addr3; \ + ( addr )->u8[4] = addr4; \ + ( addr )->u8[5] = addr5; \ + ( addr )->u8[6] = addr6; \ + ( addr )->u8[7] = addr7; \ + ( addr )->u8[8] = addr8; \ + ( addr )->u8[9] = addr9; \ + ( addr )->u8[10] = addr10; \ + ( addr )->u8[11] = addr11; \ + ( addr )->u8[12] = addr12; \ + ( addr )->u8[13] = addr13; \ + ( addr )->u8[14] = addr14; \ + ( addr )->u8[15] = addr15; \ + } while( 0 ) + /** + * Copy an IP address to another IP address. + * + * Copies an IP address from one place to another. + * + * Example: + \code + uip_ipaddr_t ipaddr1, ipaddr2; + + uip_ipaddr(&ipaddr1, 192,16,1,2); + uip_ipaddr_copy(&ipaddr2, &ipaddr1); + \endcode + * + * \param dest The destination for the copy. + * \param src The source from where to copy. + * + * \hideinitializer + */ +#ifndef uip_ipaddr_copy + #define uip_ipaddr_copy( dest, src ) \ + do \ + { \ + (dest)->u8[0] = (src)->u8[0]; \ + (dest)->u8[1] = (src)->u8[1]; \ + (dest)->u8[2] = (src)->u8[2]; \ + (dest)->u8[3] = (src)->u8[3]; \ + } while( 0 ) +#endif + + /** + * Compare two IP addresses + * + * Compares two IP addresses. + * + * Example: + \code + uip_ipaddr_t ipaddr1, ipaddr2; + + uip_ipaddr(&ipaddr1, 192,16,1,2); + if(uip_ipaddr_cmp(&ipaddr2, &ipaddr1)) { + printf("They are the same"); + } + \endcode + * + * \param addr1 The first IP address. + * \param addr2 The second IP address. + * + * \hideinitializer + */ +#if !UIP_CONF_IPV6 +#define uip_ipaddr_cmp( addr1, addr2 ) ( (addr1)->u16[0] == (addr2)->u16[0] && (addr1)->u16[1] == (addr2)->u16[1] ) +#else /* !UIP_CONF_IPV6 */ +#define uip_ipaddr_cmp( addr1, addr2 ) ( memcmp(addr1, addr2, sizeof(uip_ip6addr_t)) == 0 ) +#endif /* !UIP_CONF_IPV6 */ + + /** + * Compare two IP addresses with netmasks + * + * Compares two IP addresses with netmasks. The masks are used to mask + * out the bits that are to be compared. + * + * Example: + \code + uip_ipaddr_t ipaddr1, ipaddr2, mask; + + uip_ipaddr(&mask, 255,255,255,0); + uip_ipaddr(&ipaddr1, 192,16,1,2); + uip_ipaddr(&ipaddr2, 192,16,1,3); + if(uip_ipaddr_maskcmp(&ipaddr1, &ipaddr2, &mask)) { + printf("They are the same"); + } + \endcode + * + * \param addr1 The first IP address. + * \param addr2 The second IP address. + * \param mask The netmask. + * + * \hideinitializer + */ +#if !UIP_CONF_IPV6 +#define uip_ipaddr_maskcmp( addr1, addr2, mask ) \ + ( \ + (((( u16_t * ) addr1)[0] & (( u16_t * ) mask)[0]) == ((( u16_t * ) addr2)[0] & (( u16_t * ) mask)[0])) && \ + (((( u16_t * ) addr1)[1] & (( u16_t * ) mask)[1]) == ((( u16_t * ) addr2)[1] & (( u16_t * ) mask)[1])) \ + ) +#else +#define uip_ipaddr_prefixcmp( addr1, addr2, length ) ( memcmp(addr1, addr2, length >> 3) == 0 ) +#endif + + /** + * Check if an address is a broadcast address for a network. + * + * Checks if an address is the broadcast address for a network. The + * network is defined by an IP address that is on the network and the + * network's netmask. + * + * \param addr The IP address. + * \param netaddr The network's IP address. + * \param netmask The network's netmask. + * + * \hideinitializer + */ + + /*#define uip_ipaddr_isbroadcast(addr, netaddr, netmask) + ((uip_ipaddr_t *)(addr)).u16 & ((uip_ipaddr_t *)(addr)).u16*/ + +/** + * Mask out the network part of an IP address. + * + * Masks out the network part of an IP address, given the address and + * the netmask. + * + * Example: + \code + uip_ipaddr_t ipaddr1, ipaddr2, netmask; + + uip_ipaddr(&ipaddr1, 192,16,1,2); + uip_ipaddr(&netmask, 255,255,255,0); + uip_ipaddr_mask(&ipaddr2, &ipaddr1, &netmask); + \endcode + * + * In the example above, the variable "ipaddr2" will contain the IP + * address 192.168.1.0. + * + * \param dest Where the result is to be placed. + * \param src The IP address. + * \param mask The netmask. + * + * \hideinitializer + */ +#define uip_ipaddr_mask( dest, src, mask ) \ + do \ + { \ + ( ( u16_t * ) dest )[0] = ( ( u16_t * ) src )[0] & ( ( u16_t * ) mask )[0]; \ + ( ( u16_t * ) dest )[1] = ( ( u16_t * ) src )[1] & ( ( u16_t * ) mask )[1]; \ + } while( 0 ) + +/** + * Pick the first octet of an IP address. + * + * Picks out the first octet of an IP address. + * + * Example: + \code + uip_ipaddr_t ipaddr; + u8_t octet; + + uip_ipaddr(&ipaddr, 1,2,3,4); + octet = uip_ipaddr1(&ipaddr); + \endcode + * + * In the example above, the variable "octet" will contain the value 1. + * + * \hideinitializer + */ +#define uip_ipaddr1( addr ) ( (addr)->u8[0] ) + +/** + * Pick the second octet of an IP address. + * + * Picks out the second octet of an IP address. + * + * Example: + \code + uip_ipaddr_t ipaddr; + u8_t octet; + + uip_ipaddr(&ipaddr, 1,2,3,4); + octet = uip_ipaddr2(&ipaddr); + \endcode + * + * In the example above, the variable "octet" will contain the value 2. + * + * \hideinitializer + */ +#define uip_ipaddr2( addr ) ( (addr)->u8[1] ) + +/** + * Pick the third octet of an IP address. + * + * Picks out the third octet of an IP address. + * + * Example: + \code + uip_ipaddr_t ipaddr; + u8_t octet; + + uip_ipaddr(&ipaddr, 1,2,3,4); + octet = uip_ipaddr3(&ipaddr); + \endcode + * + * In the example above, the variable "octet" will contain the value 3. + * + * \hideinitializer + */ +#define uip_ipaddr3( addr ) ( (addr)->u8[2] ) + +/** + * Pick the fourth octet of an IP address. + * + * Picks out the fourth octet of an IP address. + * + * Example: + \code + uip_ipaddr_t ipaddr; + u8_t octet; + + uip_ipaddr(&ipaddr, 1,2,3,4); + octet = uip_ipaddr4(&ipaddr); + \endcode + * + * In the example above, the variable "octet" will contain the value 4. + * + * \hideinitializer + */ +#define uip_ipaddr4( addr ) ( (addr)->u8[3] ) + /** + * Convert 16-bit quantity from host byte order to network byte order. + * + * This macro is primarily used for converting constants from host + * byte order to network byte order. For converting variables to + * network byte order, use the htons() function instead. + * + * \hideinitializer + */ +#ifndef HTONS +#if UIP_BYTE_ORDER == UIP_BIG_ENDIAN +#define HTONS( n ) ( n ) +#define HTONL( n ) ( n ) +#else /* UIP_BYTE_ORDER == UIP_BIG_ENDIAN */ +#define HTONS( n ) ( u16_t ) ( (((u16_t) (n)) << 8) | (((u16_t) (n)) >> 8) ) +#define HTONL( n ) ( ((u32_t) HTONS(n) << 16) | HTONS((u32_t) (n) >> 16) ) +#endif /* UIP_BYTE_ORDER == UIP_BIG_ENDIAN */ +#else +#error "HTONS already defined!" +#endif /* HTONS */ + + /** + * Convert 16-bit quantity from host byte order to network byte order. + * + * This function is primarily used for converting variables from host + * byte order to network byte order. For converting constants to + * network byte order, use the HTONS() macro instead. + */ +#ifndef htons + CCIF u16_t htons( u16_t val ); +#endif /* htons */ + +#ifndef ntohs + #define ntohs htons +#endif + +#ifndef htonl + CCIF u32_t htonl( u32_t val ); +#endif /* htonl */ + +#ifndef ntohl + #define ntohl htonl +#endif + +/** @} */ + +/** + * Pointer to the application data in the packet buffer. + * + * This pointer points to the application data when the application is + * called. If the application wishes to send data, the application may + * use this space to write the data into before calling uip_send(). + */ +CCIF extern void *uip_appdata; + +#if UIP_URGDATA > 0 + +/* u8_t *uip_urgdata: + * + * This pointer points to any urgent data that has been received. Only + * present if compiled with support for urgent data (UIP_URGDATA). + */ +extern void *uip_urgdata; +#endif /* UIP_URGDATA > 0 */ + +/** + * \defgroup uipdrivervars Variables used in uIP device drivers + * @{ + * + * uIP has a few global variables that are used in device drivers for + * uIP. + */ + +/** + * The length of the packet in the uip_buf buffer. + * + * The global variable uip_len holds the length of the packet in the + * uip_buf buffer. + * + * When the network device driver calls the uIP input function, + * uip_len should be set to the length of the packet in the uip_buf + * buffer. + * + * When sending packets, the device driver should use the contents of + * the uip_len variable to determine the length of the outgoing + * packet. + * + */ +CCIF extern u16_t uip_len; + +/** + * The length of the extension headers + */ +extern u8_t uip_ext_len; + +/** @} */ +#if UIP_URGDATA > 0 +extern u16_t uip_urglen, uip_surglen; +#endif /* UIP_URGDATA > 0 */ + +/** + * Representation of a uIP TCP connection. + * + * The uip_conn structure is used for identifying a connection. All + * but one field in the structure are to be considered read-only by an + * application. The only exception is the appstate field whose purpose + * is to let the application store application-specific state (e.g., + * file pointers) for the connection. The type of this field is + * configured in the "uipopt.h" header file. + */ +struct uip_conn +{ + uip_ipaddr_t ripaddr; /**< The IP address of the remote host. */ + + u16_t lport; /**< The local TCP port, in network byte order. */ + u16_t rport; /**< The local remote TCP port, in network byte + order. */ + + u8_t rcv_nxt[4]; /**< The sequence number that we expect to + receive next. */ + u8_t snd_nxt[4]; /**< The sequence number that was last sent by + us. */ + u16_t len; /**< Length of the data that was previously sent. */ + u16_t mss; /**< Current maximum segment size for the + connection. */ + u16_t initialmss; /**< Initial maximum segment size for the + connection. */ + u8_t sa; /**< Retransmission time-out calculation state + variable. */ + u8_t sv; /**< Retransmission time-out calculation state + variable. */ + u8_t rto; /**< Retransmission time-out. */ + u8_t tcpstateflags; /**< TCP state and flags. */ + u8_t timer; /**< The retransmission timer. */ + u8_t nrtx; /**< The number of retransmissions for the last + segment sent. */ + + /** The application state. */ + uip_tcp_appstate_t appstate; +}; + +/** + * Pointer to the current TCP connection. + * + * The uip_conn pointer can be used to access the current TCP + * connection. + */ +CCIF extern struct uip_conn *uip_conn; +#ifdef UIP_TCP + +/* The array containing all uIP connections. */ +CCIF extern struct uip_conn uip_conns[UIP_CONNS]; +#endif + +/** + * \addtogroup uiparch + * @{ + */ + +/** + * 4-byte array used for the 32-bit sequence number calculations. + */ +extern u8_t uip_acc32[4]; + +/** @} */ +#if UIP_UDP == 1 +/** + * Representation of a uIP UDP connection. + */ +struct uip_udp_conn +{ + uip_ipaddr_t ripaddr; /**< The IP address of the remote peer. */ + u16_t lport; /**< The local port number in network byte order. */ + u16_t rport; /**< The remote port number in network byte order. */ + u8_t ttl; /**< Default time-to-live. */ + + /** The application state. */ + uip_udp_appstate_t appstate; +}; + +/** + * The current UDP connection. + */ +extern struct uip_udp_conn *uip_udp_conn; +extern struct uip_udp_conn uip_udp_conns[UIP_UDP_CONNS]; +#endif /* UIP_UDP */ + +struct uip_router +{ + int ( *activate ) ( void ); + int ( *deactivate ) ( void ); + uip_ipaddr_t * ( *lookup ) ( uip_ipaddr_t *destipaddr, uip_ipaddr_t *nexthop ); +}; + +#ifdef UIP_CONF_ROUTER +extern const struct uip_router *uip_router; + +/** + * uIP routing driver registration function. + */ +void uip_router_register( const struct uip_router *router ); +#endif /*UIP_CONF_ROUTER*/ + +#ifdef UIP_CONF_ICMP6 +struct uip_icmp6_conn +{ + uip_icmp6_appstate_t appstate; +}; +extern struct uip_icmp6_conn uip_icmp6_conns; +#endif /*UIP_CONF_ICMP6*/ + +/** + * The uIP TCP/IP statistics. + * + * This is the variable in which the uIP TCP/IP statistics are gathered. + */ +#if UIP_STATISTICS == 1 +extern struct uip_stats uip_stat; +#define UIP_STAT( s ) s +#else +#define UIP_STAT( s ) +#endif /* UIP_STATISTICS == 1 */ + +/** + * The structure holding the TCP/IP statistics that are gathered if + * UIP_STATISTICS is set to 1. + * + */ +struct uip_stats +{ + struct + { + uip_stats_t recv; /**< Number of received packets at the IP + layer. */ + uip_stats_t sent; /**< Number of sent packets at the IP + layer. */ + uip_stats_t forwarded; /**< Number of forwarded packets at the IP + layer. */ + uip_stats_t drop; /**< Number of dropped packets at the IP + layer. */ + uip_stats_t vhlerr; /**< Number of packets dropped due to wrong + IP version or header length. */ + uip_stats_t hblenerr; /**< Number of packets dropped due to wrong + IP length, high byte. */ + uip_stats_t lblenerr; /**< Number of packets dropped due to wrong + IP length, low byte. */ + uip_stats_t fragerr; /**< Number of packets dropped since they + were IP fragments. */ + uip_stats_t chkerr; /**< Number of packets dropped due to IP + checksum errors. */ + uip_stats_t protoerr; /**< Number of packets dropped since they + were neither ICMP, UDP nor TCP. */ + } ip; /**< IP statistics. */ + struct + { + uip_stats_t recv; /**< Number of received ICMP packets. */ + uip_stats_t sent; /**< Number of sent ICMP packets. */ + uip_stats_t drop; /**< Number of dropped ICMP packets. */ + uip_stats_t typeerr; /**< Number of ICMP packets with a wrong + type. */ + uip_stats_t chkerr; /**< Number of ICMP packets with a bad + checksum. */ + } icmp; /**< ICMP statistics. */ +#ifdef UIP_TCP + struct + { + uip_stats_t recv; /**< Number of recived TCP segments. */ + uip_stats_t sent; /**< Number of sent TCP segments. */ + uip_stats_t drop; /**< Number of dropped TCP segments. */ + uip_stats_t chkerr; /**< Number of TCP segments with a bad + checksum. */ + uip_stats_t ackerr; /**< Number of TCP segments with a bad ACK + number. */ + uip_stats_t rst; /**< Number of recevied TCP RST (reset) segments. */ + uip_stats_t rexmit; /**< Number of retransmitted TCP segments. */ + uip_stats_t syndrop; /**< Number of dropped SYNs due to too few + connections was avaliable. */ + uip_stats_t synrst; /**< Number of SYNs for closed ports, + triggering a RST. */ + } tcp; /**< TCP statistics. */ +#endif +#ifdef UIP_UDP + struct + { + uip_stats_t drop; /**< Number of dropped UDP segments. */ + uip_stats_t recv; /**< Number of recived UDP segments. */ + uip_stats_t sent; /**< Number of sent UDP segments. */ + uip_stats_t chkerr; /**< Number of UDP segments with a bad + checksum. */ + } udp; /**< UDP statistics. */ +#endif /* UIP_UDP */ +#if UIP_CONF_IPV6 != 0 + struct + { + uip_stats_t drop; /**< Number of dropped ND6 packets. */ + uip_stats_t recv; /**< Number of recived ND6 packets */ + uip_stats_t sent; /**< Number of sent ND6 packets */ + } nd6; +#endif /*UIP_CONF_IPV6*/ +}; + +/*---------------------------------------------------------------------------*/ + +/* All the stuff below this point is internal to uIP and should not be + * used directly by an application or by a device driver. + */ + +/*---------------------------------------------------------------------------*/ + +/* u8_t uip_flags: + * + * When the application is called, uip_flags will contain the flags + * that are defined in this file. Please read below for more + * information. + */ +CCIF extern u8_t uip_flags; + +/* The following flags may be set in the global variable uip_flags + before calling the application callback. The UIP_ACKDATA, + UIP_NEWDATA, and UIP_CLOSE flags may both be set at the same time, + whereas the others are mutually exclusive. Note that these flags + should *NOT* be accessed directly, but only through the uIP + functions/macros. */ +#define UIP_ACKDATA 1 /* Signifies that the outstanding data was + acked and the application should send + out new data instead of retransmitting + the last data. */ +#define UIP_NEWDATA 2 /* Flags the fact that the peer has sent + us new data. */ +#define UIP_REXMIT 4 /* Tells the application to retransmit the + data that was last sent. */ +#define UIP_POLL 8 /* Used for polling the application, to + check if the application has data that + it wants to send. */ +#define UIP_CLOSE 16 /* The remote host has closed the + connection, thus the connection has + gone away. Or the application signals + that it wants to close the + connection. */ +#define UIP_ABORT 32 /* The remote host has aborted the + connection, thus the connection has + gone away. Or the application signals + that it wants to abort the + connection. */ +#define UIP_CONNECTED 64 /* We have got a connection from a remote + host and have set up a new connection + for it, or an active connection has + been successfully established. */ + +#define UIP_TIMEDOUT 128 /* The connection has been aborted due to + too many retransmissions. */ + +/** + * \brief process the options within a hop by hop or destination option header + * \retval 0: nothing to send, + * \retval 1: drop pkt + * \retval 2: ICMP error message to send +*/ + +/*static u8_t +uip_ext_hdr_options_process(); */ + +/* uip_process(flag): + * + * The actual uIP function which does all the work. + */ +void uip_process( u8_t flag ); + +/* The following flags are passed as an argument to the uip_process() + function. They are used to distinguish between the two cases where + uip_process() is called. It can be called either because we have + incoming data that should be processed, or because the periodic + timer has fired. These values are never used directly, but only in + the macros defined in this file. */ +#define UIP_DATA 1 /* Tells uIP that there is incoming + data in the uip_buf buffer. The + length of the data is stored in the + global variable uip_len. */ +#define UIP_TIMER 2 /* Tells uIP that the periodic timer + has fired. */ +#define UIP_POLL_REQUEST 3 /* Tells uIP that a connection should + be polled. */ +#define UIP_UDP_SEND_CONN 4 /* Tells uIP that a UDP datagram + should be constructed in the + uip_buf buffer. */ +#ifdef UIP_UDP +#define UIP_UDP_TIMER 5 +#endif /* UIP_UDP */ + +/* The TCP states used in the uip_conn->tcpstateflags. */ +#define UIP_CLOSED 0 +#define UIP_SYN_RCVD 1 +#define UIP_SYN_SENT 2 +#define UIP_ESTABLISHED 3 +#define UIP_FIN_WAIT_1 4 +#define UIP_FIN_WAIT_2 5 +#define UIP_CLOSING 6 +#define UIP_TIME_WAIT 7 +#define UIP_LAST_ACK 8 +#define UIP_TS_MASK 15 + +#define UIP_STOPPED 16 + +/* The TCP and IP headers. */ +#include "net/pack_struct_start.h" +struct uip_tcpip_hdr +{ +#if UIP_CONF_IPV6 != 0 + /* IPv6 header. */ + u8_t vtc, tcflow; + u16_t flow; + u8_t len[2]; + u8_t proto, ttl; + uip_ip6addr_t srcipaddr, destipaddr; +#else /* UIP_CONF_IPV6 */ + /* IPv4 header. */ + u8_t vhl, tos, len[2], ipid[2], ipoffset[2], ttl, proto; + u16_t ipchksum; + uip_ipaddr_t srcipaddr, destipaddr; +#endif /* UIP_CONF_IPV6 */ + + /* TCP header. */ + u16_t srcport, destport; + u8_t seqno[4], ackno[4], tcpoffset, flags, wnd[2]; + u16_t tcpchksum; + u8_t urgp[2]; + u8_t optdata[4]; +} +#include "net/pack_struct_end.h" + +/* The ICMP and IP headers. */ +#include "net/pack_struct_start.h" +struct uip_icmpip_hdr +{ +#if UIP_CONF_IPV6 != 0 + /* IPv6 header. */ + u8_t vtc, tcf; + u16_t flow; + u8_t len[2]; + u8_t proto, ttl; + uip_ip6addr_t srcipaddr, destipaddr; +#else /* UIP_CONF_IPV6 */ + /* IPv4 header. */ + u8_t vhl, tos, len[2], ipid[2], ipoffset[2], ttl, proto; + u16_t ipchksum; + uip_ipaddr_t srcipaddr, destipaddr; +#endif /* UIP_CONF_IPV6 */ + + /* ICMP header. */ + u8_t type, icode; + u16_t icmpchksum; +#if !UIP_CONF_IPV6 + u16_t id, seqno; + u8_t payload[1]; +#endif /* !UIP_CONF_IPV6 */ +} + +#include "net/pack_struct_end.h" + +/* The UDP and IP headers. */ +#include "net/pack_struct_start.h" +struct uip_udpip_hdr +{ +#if UIP_CONF_IPV6 != 0 + /* IPv6 header. */ + u8_t vtc, tcf; + u16_t flow; + u8_t len[2]; + u8_t proto, ttl; + uip_ip6addr_t srcipaddr, destipaddr; +#else /* UIP_CONF_IPV6 */ + /* IP header. */ + u8_t vhl, tos, len[2], ipid[2], ipoffset[2], ttl, proto; + u16_t ipchksum; + uip_ipaddr_t srcipaddr, destipaddr; +#endif /* UIP_CONF_IPV6 */ + + /* UDP header. */ + u16_t srcport, destport; + u16_t udplen; + u16_t udpchksum; +} + +#include "net/pack_struct_end.h" + +/* + * In IPv6 the length of the L3 headers before the transport header is + * not fixed, due to the possibility to include extension option headers + * after the IP header. hence we split here L3 and L4 headers + */ + +/* The IP header */ +struct uip_ip_hdr +{ +#if UIP_CONF_IPV6 != 0 + /* IPV6 header */ + u8_t vtc; + u8_t tcflow; + u16_t flow; + u8_t len[2]; + u8_t proto, ttl; + uip_ip6addr_t srcipaddr, destipaddr; +#else /* UIP_CONF_IPV6 */ + /* IPV4 header */ + u8_t vhl, tos, len[2], ipid[2], ipoffset[2], ttl, proto; + u16_t ipchksum; + uip_ipaddr_t srcipaddr, destipaddr; +#endif /* UIP_CONF_IPV6 */ +}; + +/* + * IPv6 extension option headers: we are able to process + * the 4 extension headers defined in RFC2460 (IPv6): + * - Hop by hop option header, destination option header: + * These two are not used by any core IPv6 protocol, hence + * we just read them and go to the next. They convey options, + * the options defined in RFC2460 are Pad1 and PadN, which do + * some padding, and that we do not need to read (the length + * field in the header is enough) + * - Routing header: this one is most notably used by MIPv6, + * which we do not implement, hence we just read it and go + * to the next + * - Fragmentation header: we read this header and are able to + * reassemble packets + * + * We do not offer any means to send packets with extension headers + * + * We do not implement Authentication and ESP headers, which are + * used in IPSec and defined in RFC4302,4303,4305,4385 + */ + +/* common header part */ +struct uip_ext_hdr +{ + u8_t next; + u8_t len; +}; + +/* Hop by Hop option header */ +struct uip_hbho_hdr +{ + u8_t next; + u8_t len; +}; + +/* destination option header */ +struct uip_desto_hdr +{ + u8_t next; + u8_t len; +}; + +/* We do not define structures for PAD1 and PADN options */ + +/* + * routing header + * the routing header as 4 common bytes, then routing header type + * specific data there are several types of routing header. Type 0 was + * deprecated as per RFC5095 most notable other type is 2, used in + * RFC3775 (MIPv6) here we do not implement MIPv6, so we just need to + * parse the 4 first bytes + */ +struct uip_routing_hdr +{ + u8_t next; + u8_t len; + u8_t routing_type; + u8_t seg_left; +}; + +/* fragmentation header */ +struct uip_frag_hdr +{ + u8_t next; + u8_t res; + u16_t offsetresmore; + u32_t id; +}; + +/* + * an option within the destination or hop by hop option headers + * it contains type an length, which is true for all options but PAD1 + */ +struct uip_ext_hdr_opt +{ + u8_t type; + u8_t len; +}; + +/* PADN option */ +struct uip_ext_hdr_opt_padn +{ + u8_t opt_type; + u8_t opt_len; +}; + +/* TCP header */ +struct uip_tcp_hdr +{ + u16_t srcport; + u16_t destport; + u8_t seqno[4]; + u8_t ackno[4]; + u8_t tcpoffset; + u8_t flags; + u8_t wnd[2]; + u16_t tcpchksum; + u8_t urgp[2]; + u8_t optdata[4]; +}; + +/* The ICMP headers. */ +struct uip_icmp_hdr +{ + u8_t type, icode; + u16_t icmpchksum; +#if !UIP_CONF_IPV6 + u16_t id, seqno; +#endif /* !UIP_CONF_IPV6 */ +}; + +/* The UDP headers. */ +struct uip_udp_hdr +{ + u16_t srcport; + u16_t destport; + u16_t udplen; + u16_t udpchksum; +}; + +/** + * The buffer size available for user data in the \ref uip_buf buffer. + * + * This macro holds the available size for user data in the \ref + * uip_buf buffer. The macro is intended to be used for checking + * bounds of available user data. + * + * Example: + \code + snprintf(uip_appdata, UIP_APPDATA_SIZE, "%u\n", i); + \endcode + * + * \hideinitializer + */ +#define UIP_APPDATA_SIZE ( UIP_BUFSIZE - UIP_LLH_LEN - UIP_TCPIP_HLEN ) +#define UIP_APPDATA_PTR ( void * ) &uip_buf[UIP_LLH_LEN + UIP_TCPIP_HLEN] + +#define UIP_PROTO_ICMP 1 +#define UIP_PROTO_TCP 6 +#define UIP_PROTO_UDP 17 +#define UIP_PROTO_ICMP6 58 + +#if UIP_CONF_IPV6 != 0 + +/** @{ */ + +/** \brief extension headers types */ +#define UIP_PROTO_HBHO 0 +#define UIP_PROTO_DESTO 60 +#define UIP_PROTO_ROUTING 43 +#define UIP_PROTO_FRAG 44 +#define UIP_PROTO_NONE 59 + +/** @} */ + +/** @{ */ + +/** \brief Destination and Hop By Hop extension headers option types */ +#define UIP_EXT_HDR_OPT_PAD1 0 +#define UIP_EXT_HDR_OPT_PADN 1 + +/** @} */ + +/** @{ */ + +/** + * \brief Bitmaps for extension header processing + * + * When processing extension headers, we should record somehow which one we + * see, because you cannot have twice the same header, except for destination + * We store all this in one u8_t bitmap one bit for each header expected. The + * order in the bitmap is the order recommended in RFC2460 + */ +#define UIP_EXT_HDR_BITMAP_HBHO 0x01 +#define UIP_EXT_HDR_BITMAP_DESTO1 0x02 +#define UIP_EXT_HDR_BITMAP_ROUTING 0x04 +#define UIP_EXT_HDR_BITMAP_FRAG 0x08 +#define UIP_EXT_HDR_BITMAP_AH 0x10 +#define UIP_EXT_HDR_BITMAP_ESP 0x20 +#define UIP_EXT_HDR_BITMAP_DESTO2 0x40 + +/** @} */ +#endif /* UIP_CONF_IPV6 */ + +/* Header sizes. */ +#if UIP_CONF_IPV6 != 0 +#define UIP_IPH_LEN 40 +#define UIP_FRAGH_LEN 8 +#else /* UIP_CONF_IPV6 */ +#define UIP_IPH_LEN 20 /* Size of IP header */ +#endif /* UIP_CONF_IPV6 */ + +#define UIP_UDPH_LEN 8 /* Size of UDP header */ +#define UIP_TCPH_LEN 20 /* Size of TCP header */ +#ifdef UIP_IPH_LEN +#define UIP_ICMPH_LEN 4 /* Size of ICMP header */ +#endif +#define UIP_IPUDPH_LEN ( UIP_UDPH_LEN + UIP_IPH_LEN ) /* Size of IP + + * UDP + * header */ +#define UIP_IPTCPH_LEN ( UIP_TCPH_LEN + UIP_IPH_LEN ) /* Size of IP + + * TCP + * header */ +#define UIP_TCPIP_HLEN UIP_IPTCPH_LEN +#define UIP_IPICMPH_LEN ( UIP_IPH_LEN + UIP_ICMPH_LEN ) /* size of ICMP + + IP header */ +#define UIP_LLIPH_LEN ( UIP_LLH_LEN + UIP_IPH_LEN ) /* size of L2 + + IP header */ +#if UIP_CONF_IPV6 != 0 + +/** + * The sums below are quite used in ND. When used for uip_buf, we + * include link layer length when used for uip_len, we do not, hence + * we need values with and without LLH_LEN we do not use capital + * letters as these values are variable + */ +#define uip_l2_l3_hdr_len ( UIP_LLH_LEN + UIP_IPH_LEN + uip_ext_len ) +#define uip_l2_l3_icmp_hdr_len ( UIP_LLH_LEN + UIP_IPH_LEN + uip_ext_len + UIP_ICMPH_LEN ) +#define uip_l3_hdr_len ( UIP_IPH_LEN + uip_ext_len ) +#define uip_l3_icmp_hdr_len ( UIP_IPH_LEN + uip_ext_len + UIP_ICMPH_LEN ) +#endif /*UIP_CONF_IPV6*/ + +#ifdef UIP_FIXEDADDR +CCIF extern const uip_ipaddr_t uip_hostaddr, uip_netmask, uip_draddr; +#else /* UIP_FIXEDADDR */ +CCIF extern uip_ipaddr_t uip_hostaddr, uip_netmask, uip_draddr; +#endif /* UIP_FIXEDADDR */ +CCIF extern const uip_ipaddr_t uip_broadcast_addr; +CCIF extern const uip_ipaddr_t uip_all_zeroes_addr; + +#ifdef UIP_FIXEDETHADDR +CCIF extern const uip_lladdr_t uip_lladdr; +#else +CCIF extern uip_lladdr_t uip_lladdr; +#endif +#if UIP_CONF_IPV6 != 0 + +/** + * \brief Is IPv6 address a the unspecified address + * a is of type uip_ipaddr_t + */ +#define uip_is_addr_unspecified( a ) \ + ( \ + (((a)->u16[0]) == 0) && \ + (((a)->u16[1]) == 0) && \ + (((a)->u16[2]) == 0) && \ + (((a)->u16[3]) == 0) && \ + (((a)->u16[4]) == 0) && \ + (((a)->u16[5]) == 0) && \ + (((a)->u16[6]) == 0) && \ + (((a)->u16[7]) == 0) \ + ) + +/** \brief Is IPv6 address a the link local all-nodes multicast address */ +#define uip_is_addr_linklocal_allnodes_mcast( a ) \ + ( \ + (((a)->u8[0]) == 0xff) && \ + (((a)->u8[1]) == 0x02) && \ + (((a)->u16[1]) == 0) && \ + (((a)->u16[2]) == 0) && \ + (((a)->u16[3]) == 0) && \ + (((a)->u16[4]) == 0) && \ + (((a)->u16[5]) == 0) && \ + (((a)->u16[6]) == 0) && \ + (((a)->u8[14]) == 0) && \ + (((a)->u8[15]) == 0x01) \ + ) + +/** \brief set IP address a to unspecified */ +#define uip_create_unspecified( a ) uip_ip6addr( a, 0, 0, 0, 0, 0, 0, 0, 0 ) + +/** \brief set IP address a to the link local all-nodes multicast address */ +#define uip_create_linklocal_allnodes_mcast( a ) uip_ip6addr( a, 0xff02, 0, 0, 0, 0, 0, 0, 0x0001 ) + +/** \brief set IP address a to the link local all-routers multicast address */ +#define uip_create_linklocal_allrouters_mcast( a ) uip_ip6addr( a, 0xff02, 0, 0, 0, 0, 0, 0, 0x0002 ) + +/** + * \brief is addr (a) a solicited node multicast address, see RFC3513 + * a is of type uip_ipaddr_t* + */ +#define uip_is_addr_solicited_node( a ) \ + ( \ + (((a)->u8[0]) == 0xFF) && \ + (((a)->u8[1]) == 0x02) && \ + (((a)->u16[1]) == 0) && \ + (((a)->u16[2]) == 0) && \ + (((a)->u16[3]) == 0) && \ + (((a)->u16[4]) == 0) && \ + (((a)->u16[5]) == 1) && \ + (((a)->u8[12]) == 0xFF) \ + ) + +/** + * \briefput in b the solicited node address corresponding to address a + * both a and b are of type uip_ipaddr_t* + * */ +#define uip_create_solicited_node( a, b ) \ + ( ((b)->u8[0]) = 0xFF ); \ + ( ((b)->u8[1]) = 0x02 ); \ + ( ((b)->u16[1]) = 0 ); \ + ( ((b)->u16[2]) = 0 ); \ + ( ((b)->u16[3]) = 0 ); \ + ( ((b)->u16[4]) = 0 ); \ + ( ((b)->u8[10]) = 0 ); \ + ( ((b)->u8[11]) = 0x01 ); \ + ( ((b)->u8[12]) = 0xFF ); \ + ( ((b)->u8[13]) = ((a)->u8[13]) ); \ + ( ((b)->u16[7]) = ((a)->u16[7]) ) + +/** + * \brief is addr (a) a link local unicast address, see RFC3513 + * i.e. is (a) on prefix FE80::/10 + * a is of type uip_ipaddr_t* + */ +#define uip_is_addr_link_local( a ) ( (((a)->u8[0]) == 0xFE) && (((a)->u8[1]) == 0x80) ) + +/** + * \brief was addr (a) forged based on the mac address m + * a type is uip_ipaddr_t + * m type is uiplladdr_t + */ +#ifdef UIP_CONF_LL_802154 +#define uip_is_addr_mac_addr_based( a, m ) \ + ( \ + (((a)->u8[8]) == (((m)->addr[0]) ^ 0x02)) && \ + (((a)->u8[9]) == (m)->addr[1]) && \ + (((a)->u8[10]) == (m)->addr[2]) && \ + (((a)->u8[11]) == (m)->addr[3]) && \ + (((a)->u8[12]) == (m)->addr[4]) && \ + (((a)->u8[13]) == (m)->addr[5]) && \ + (((a)->u8[14]) == (m)->addr[6]) && \ + (((a)->u8[15]) == (m)->addr[7]) \ + ) +#else +#define uip_is_addr_mac_addr_based( a, m ) \ + ( \ + (((a)->u8[8]) == (((m)->addr[0]) | 0x02)) && \ + (((a)->u8[9]) == (m)->addr[1]) && \ + (((a)->u8[10]) == (m)->addr[2]) && \ + (((a)->u8[11]) == 0xff) && \ + (((a)->u8[12]) == 0xfe) && \ + (((a)->u8[13]) == (m)->addr[3]) && \ + (((a)->u8[14]) == (m)->addr[4]) && \ + (((a)->u8[15]) == (m)->addr[5]) \ + ) +#endif /*UIP_CONF_LL_802154*/ + +/** + * \brief is address a multicast address, see RFC 3513 + * a is of type uip_ipaddr_t* + * */ +#define uip_is_addr_mcast( a ) ( ((a)->u8[0]) == 0xFF ) + +/** + * \brief is group-id of multicast address a + * the all nodes group-id + */ +#define uip_is_mcast_group_id_all_nodes( a ) \ + ( \ + (((a)->u16[1]) == 0) && \ + (((a)->u16[2]) == 0) && \ + (((a)->u16[3]) == 0) && \ + (((a)->u16[4]) == 0) && \ + (((a)->u16[5]) == 0) && \ + (((a)->u16[6]) == 0) && \ + (((a)->u8[14]) == 0) && \ + (((a)->u8[15]) == 1) \ + ) + +/** + * \brief is group-id of multicast address a + * the all routers group-id + */ +#define uip_is_mcast_group_id_all_routers( a ) \ + ( \ + (((a)->u16[1]) == 0) && \ + (((a)->u16[2]) == 0) && \ + (((a)->u16[3]) == 0) && \ + (((a)->u16[4]) == 0) && \ + (((a)->u16[5]) == 0) && \ + (((a)->u16[6]) == 0) && \ + (((a)->u8[14]) == 0) && \ + (((a)->u8[15]) == 2) \ + ) +#endif /*UIP_CONF_IPV6*/ + +/** + * Calculate the Internet checksum over a buffer. + * + * The Internet checksum is the one's complement of the one's + * complement sum of all 16-bit words in the buffer. + * + * See RFC1071. + * + * \param buf A pointer to the buffer over which the checksum is to be + * computed. + * + * \param len The length of the buffer over which the checksum is to + * be computed. + * + * \return The Internet checksum of the buffer. + */ +u16_t uip_chksum( u16_t *buf, u16_t len ); + +/** + * Calculate the IP header checksum of the packet header in uip_buf. + * + * The IP header checksum is the Internet checksum of the 20 bytes of + * the IP header. + * + * \return The IP header checksum of the IP header in the uip_buf + * buffer. + */ +u16_t uip_ipchksum( void ); + +/** + * Calculate the TCP checksum of the packet in uip_buf and uip_appdata. + * + * The TCP checksum is the Internet checksum of data contents of the + * TCP segment, and a pseudo-header as defined in RFC793. + * + * \return The TCP checksum of the TCP segment in uip_buf and pointed + * to by uip_appdata. + */ +u16_t uip_tcpchksum( void ); + +/** + * Calculate the UDP checksum of the packet in uip_buf and uip_appdata. + * + * The UDP checksum is the Internet checksum of data contents of the + * UDP segment, and a pseudo-header as defined in RFC768. + * + * \return The UDP checksum of the UDP segment in uip_buf and pointed + * to by uip_appdata. + */ +u16_t uip_udpchksum( void ); + +/** + * Calculate the ICMP checksum of the packet in uip_buf. + * + * \return The ICMP checksum of the ICMP packet in uip_buf + */ +u16_t uip_icmp6chksum( void ); + +/* Events that can get posted to the uIP event queue. These are events +originating from the Ethernet interface or from a timer. */ +#define uipETHERNET_RX_EVENT 0x01UL +#define uipETHERNET_TX_EVENT 0x02UL +#define uipARP_TIMER_EVENT 0x04UL +#define uipPERIODIC_TIMER_EVENT 0x08UL +#define uipAPPLICATION_SEND_EVENT 0x10UL + + +#endif /* __UIP_H__ */ + +/** @} */ diff --git a/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/uip_arch.h b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/uip_arch.h new file mode 100644 index 0000000..b529a73 --- /dev/null +++ b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/uip_arch.h @@ -0,0 +1,138 @@ +/** + * \addtogroup uip + * {@ + */ + +/** + * \defgroup uiparch Architecture specific uIP functions + * @{ + * + * The functions in the architecture specific module implement the IP + * check sum and 32-bit additions. + * + * The IP checksum calculation is the most computationally expensive + * operation in the TCP/IP stack and it therefore pays off to + * implement this in efficient assembler. The purpose of the uip-arch + * module is to let the checksum functions to be implemented in + * architecture specific assembler. + * + */ + +/** + * \file + * Declarations of architecture specific functions. + * \author Adam Dunkels + */ + +/* + * Copyright (c) 2001, Adam Dunkels. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote + * products derived from this software without specific prior + * written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * This file is part of the uIP TCP/IP stack. + * + * $Id: uip_arch.h,v 1.1 2006/06/17 22:41:19 adamdunkels Exp $ + * + */ + +#ifndef __UIP_ARCH_H__ +#define __UIP_ARCH_H__ + +#include "net/uip.h" + +/** + * Carry out a 32-bit addition. + * + * Because not all architectures for which uIP is intended has native + * 32-bit arithmetic, uIP uses an external C function for doing the + * required 32-bit additions in the TCP protocol processing. This + * function should add the two arguments and place the result in the + * global variable uip_acc32. + * + * \note The 32-bit integer pointed to by the op32 parameter and the + * result in the uip_acc32 variable are in network byte order (big + * endian). + * + * \param op32 A pointer to a 4-byte array representing a 32-bit + * integer in network byte order (big endian). + * + * \param op16 A 16-bit integer in host byte order. + */ +void uip_add32(u8_t *op32, u16_t op16); + +/** + * Calculate the Internet checksum over a buffer. + * + * The Internet checksum is the one's complement of the one's + * complement sum of all 16-bit words in the buffer. + * + * See RFC1071. + * + * \note This function is not called in the current version of uIP, + * but future versions might make use of it. + * + * \param buf A pointer to the buffer over which the checksum is to be + * computed. + * + * \param len The length of the buffer over which the checksum is to + * be computed. + * + * \return The Internet checksum of the buffer. + */ +u16_t uip_chksum(u16_t *buf, u16_t len); + +/** + * Calculate the IP header checksum of the packet header in uip_buf. + * + * The IP header checksum is the Internet checksum of the 20 bytes of + * the IP header. + * + * \return The IP header checksum of the IP header in the uip_buf + * buffer. + */ +u16_t uip_ipchksum(void); + +/** + * Calculate the TCP checksum of the packet in uip_buf and uip_appdata. + * + * The TCP checksum is the Internet checksum of data contents of the + * TCP segment, and a pseudo-header as defined in RFC793. + * + * \note The uip_appdata pointer that points to the packet data may + * point anywhere in memory, so it is not possible to simply calculate + * the Internet checksum of the contents of the uip_buf buffer. + * + * \return The TCP checksum of the TCP segment in uip_buf and pointed + * to by uip_appdata. + */ +u16_t uip_tcpchksum(void); + +u16_t uip_udpchksum(void); + +/** @} */ +/** @} */ + +#endif /* __UIP_ARCH_H__ */ diff --git a/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/uip_arp.h b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/uip_arp.h new file mode 100644 index 0000000..e04d353 --- /dev/null +++ b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/uip_arp.h @@ -0,0 +1,149 @@ +/** + * \addtogroup uip + * @{ + */ + +/** + * \addtogroup uiparp + * @{ + */ + +/** + * \file + * Macros and definitions for the ARP module. + * \author Adam Dunkels + */ + +/* + * Copyright (c) 2001-2003, Adam Dunkels. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote + * products derived from this software without specific prior + * written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * This file is part of the uIP TCP/IP stack. + * + * $Id: uip_arp.h,v 1.2 2006/08/26 23:58:45 oliverschmidt Exp $ + * + */ +#ifndef __UIP_ARP_H__ +#define __UIP_ARP_H__ + +#include "net/uip.h" + +CCIF extern struct uip_eth_addr uip_ethaddr; + +/** + * The Ethernet header. + */ +#include "net/pack_struct_start.h" +struct uip_eth_hdr +{ + struct uip_eth_addr dest; + struct uip_eth_addr src; + u16_t type; +} + +#include "net/pack_struct_end.h" + +#define UIP_ETHTYPE_ARP 0x0806 +#define UIP_ETHTYPE_IP 0x0800 +#define UIP_ETHTYPE_IPV6 0x86dd + +/* The uip_arp_init() function must be called before any of the other + ARP functions. */ +void uip_arp_init( void ); + +/* The uip_arp_ipin() function should be called whenever an IP packet + arrives from the Ethernet. This function refreshes the ARP table or + inserts a new mapping if none exists. The function assumes that an + IP packet with an Ethernet header is present in the uip_buf buffer + and that the length of the packet is in the uip_len variable. */ + +/*void uip_arp_ipin(void);*/ +#define uip_arp_ipin() + +/* The uip_arp_arpin() should be called when an ARP packet is received + by the Ethernet driver. This function also assumes that the + Ethernet frame is present in the uip_buf buffer. When the + uip_arp_arpin() function returns, the contents of the uip_buf + buffer should be sent out on the Ethernet if the uip_len variable + is > 0. */ +void uip_arp_arpin( void ); + +/* The uip_arp_out() function should be called when an IP packet + should be sent out on the Ethernet. This function creates an + Ethernet header before the IP header in the uip_buf buffer. The + Ethernet header will have the correct Ethernet MAC destination + address filled in if an ARP table entry for the destination IP + address (or the IP address of the default router) is present. If no + such table entry is found, the IP packet is overwritten with an ARP + request and we rely on TCP to retransmit the packet that was + overwritten. In any case, the uip_len variable holds the length of + the Ethernet frame that should be transmitted. */ +void uip_arp_out( void ); + +/* The uip_arp_timer() function should be called every ten seconds. It + is responsible for flushing old entries in the ARP table. */ +void uip_arp_timer( void ); + +/** @} */ + +/** + * \addtogroup uipconffunc + * @{ + */ + +/** + * Specifiy the Ethernet MAC address. + * + * The ARP code needs to know the MAC address of the Ethernet card in + * order to be able to respond to ARP queries and to generate working + * Ethernet headers. + * + * \note This macro only specifies the Ethernet MAC address to the ARP + * code. It cannot be used to change the MAC address of the Ethernet + * card. + * + * \param eaddr A pointer to a struct uip_eth_addr containing the + * Ethernet MAC address of the Ethernet card. + * + * \hideinitializer + */ +#define uip_setethaddr( eaddr ) \ + do \ + { \ + uip_ethaddr.addr[0] = eaddr.addr[0]; \ + uip_ethaddr.addr[1] = eaddr.addr[1]; \ + uip_ethaddr.addr[2] = eaddr.addr[2]; \ + uip_ethaddr.addr[3] = eaddr.addr[3]; \ + uip_ethaddr.addr[4] = eaddr.addr[4]; \ + uip_ethaddr.addr[5] = eaddr.addr[5]; \ + } while( 0 ) + + /** @} */ +#endif /* __UIP_ARP_H__ */ + + /** @} */ + diff --git a/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/uipopt.h b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/uipopt.h new file mode 100644 index 0000000..ddf6a24 --- /dev/null +++ b/third_party/FreeRTOS/Demo/Common/ethernet/FreeTCPIP/net/uipopt.h @@ -0,0 +1,695 @@ +/** + * \addtogroup uip + * @{ + */ + +/** + * \defgroup uipopt Configuration options for uIP + * @{ + * + * uIP is configured using the per-project configuration file + * "uipopt.h". This file contains all compile-time options for uIP and + * should be tweaked to match each specific project. The uIP + * distribution contains a documented example "uipopt.h" that can be + * copied and modified for each project. + * + * \note Contiki does not use the uipopt.h file to configure uIP, but + * uses a per-port uip-conf.h file that should be edited instead. + */ + +/** + * \file + * Configuration options for uIP. + * \author Adam Dunkels + * + * This file is used for tweaking various configuration options for + * uIP. You should make a copy of this file into one of your project's + * directories instead of editing this example "uipopt.h" file that + * comes with the uIP distribution. + */ + +/* + * Copyright (c) 2001-2003, Adam Dunkels. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote + * products derived from this software without specific prior + * written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * This file is part of the uIP TCP/IP stack. + * + * $Id: uipopt.h,v 1.11 2009/04/10 00:37:48 adamdunkels Exp $ + * + */ +#ifndef __UIPOPT_H__ +#define __UIPOPT_H__ + +#ifndef UIP_LITTLE_ENDIAN +#define UIP_LITTLE_ENDIAN 3412 +#endif /* UIP_LITTLE_ENDIAN */ +#ifndef UIP_BIG_ENDIAN +#define UIP_BIG_ENDIAN 1234 +#endif /* UIP_BIG_ENDIAN */ + +#include "uip-conf.h" +//_RB_#include "contiki-conf.h" + +/*------------------------------------------------------------------------------*/ + +/** + * \defgroup uipoptstaticconf Static configuration options + * @{ + * + * These configuration options can be used for setting the IP address + * settings statically, but only if UIP_FIXEDADDR is set to 1. The + * configuration options for a specific node includes IP address, + * netmask and default router as well as the Ethernet address. The + * netmask, default router and Ethernet address are applicable only + * if uIP should be run over Ethernet. + * + * This options are meaningful only for the IPv4 code. + * + * All of these should be changed to suit your project. + */ + +/** + * Determines if uIP should use a fixed IP address or not. + * + * If uIP should use a fixed IP address, the settings are set in the + * uipopt.h file. If not, the macros uip_sethostaddr(), + * uip_setdraddr() and uip_setnetmask() should be used instead. + * + * \hideinitializer + */ +#ifdef UIP_CONF_FIXEDADDR +#define UIP_FIXED_ADDR UIP_CONF_FIXEDADDR +#define UIP_FIXEDADDR 1 +#endif + +/** + * Ping IP address assignment. + * + * uIP uses a "ping" packets for setting its own IP address if this + * option is set. If so, uIP will start with an empty IP address and + * the destination IP address of the first incoming "ping" (ICMP echo) + * packet will be used for setting the hosts IP address. + * + * \note This works only if UIP_FIXEDADDR is 0. + * + * \hideinitializer + */ +#ifdef UIP_CONF_PINGADDRCONF +#define UIP_PINGADDRCONF UIP_CONF_PINGADDRCONF +#else /* UIP_CONF_PINGADDRCONF */ +#define UIP_PINGADDRCONF 0 +#endif /* UIP_CONF_PINGADDRCONF */ + +/** + * Specifies if the uIP ARP module should be compiled with a fixed + * Ethernet MAC address or not. + * + * If this configuration option is 0, the macro uip_setethaddr() can + * be used to specify the Ethernet address at run-time. + * + * \hideinitializer + */ +#define UIP_FIXEDETHADDR 0 + +/** @} */ + +/*------------------------------------------------------------------------------*/ + +/** + * \defgroup uipoptip IP configuration options + * @{ + * + */ + +/** + * The IP TTL (time to live) of IP packets sent by uIP. + * + * This should normally not be changed. + */ +#define UIP_TTL 64 + +/** + * The maximum time an IP fragment should wait in the reassembly + * buffer before it is dropped. + * + */ +#define UIP_REASS_MAXAGE 60 /*60s*/ + +/** + * Turn on support for IP packet reassembly. + * + * uIP supports reassembly of fragmented IP packets. This features + * requires an additional amount of RAM to hold the reassembly buffer + * and the reassembly code size is approximately 700 bytes. The + * reassembly buffer is of the same size as the uip_buf buffer + * (configured by UIP_BUFSIZE). + * + * \note IP packet reassembly is not heavily tested. + * + * \hideinitializer + */ +#ifdef UIP_CONF_REASSEMBLY +#define UIP_REASSEMBLY UIP_CONF_REASSEMBLY +#else /* UIP_CONF_REASSEMBLY */ +#define UIP_REASSEMBLY 0 +#endif /* UIP_CONF_REASSEMBLY */ + +/** @} */ + +/*------------------------------------------------------------------------------*/ + +/** + * \defgroup uipoptipv6 IPv6 configuration options + * @{ + * + */ + +/** The maximum transmission unit at the IP Layer*/ +#define UIP_LINK_MTU 1280 + +#ifndef UIP_CONF_IPV6 + +/** Do we use IPv6 or not (default: no) */ +#define UIP_CONF_IPV6 0 +#endif +#ifndef UIP_CONF_IPV6_QUEUE_PKT + +/** Do we do per %neighbor queuing during address resolution (default: no) */ +#define UIP_CONF_IPV6_QUEUE_PKT 0 +#endif +#ifndef UIP_CONF_IPV6_CHECKS + +/** Do we do IPv6 consistency checks (highly recommended, default: yes) */ +#define UIP_CONF_IPV6_CHECKS 1 +#endif +#ifndef UIP_CONF_IPV6_REASSEMBLY + +/** Do we do IPv6 fragmentation (default: no) */ +#define UIP_CONF_IPV6_REASSEMBLY 0 +#endif +#ifndef UIP_CONF_NETIF_MAX_ADDRESSES + +/** Default number of IPv6 addresses associated to the node's interface */ +#define UIP_CONF_NETIF_MAX_ADDRESSES 3 +#endif +#ifndef UIP_CONF_ND6_MAX_PREFIXES + +/** Default number of IPv6 prefixes associated to the node's interface */ +#define UIP_CONF_ND6_MAX_PREFIXES 3 +#endif +#ifndef UIP_CONF_ND6_MAX_NEIGHBORS + +/** Default number of neighbors that can be stored in the %neighbor cache */ +#define UIP_CONF_ND6_MAX_NEIGHBORS 4 +#endif +#ifndef UIP_CONF_ND6_MAX_DEFROUTERS + +/** Minimum number of default routers */ +#define UIP_CONF_ND6_MAX_DEFROUTERS 2 +#endif + +/** @} */ + +/*------------------------------------------------------------------------------*/ + +/** + * \defgroup uipoptudp UDP configuration options + * @{ + * + * \note The UDP support in uIP is still not entirely complete; there + * is no support for sending or receiving broadcast or multicast + * packets, but it works well enough to support a number of vital + * applications such as DNS queries, though + */ + +/** + * Toggles whether UDP support should be compiled in or not. + * + * \hideinitializer + */ +#ifdef UIP_CONF_UDP +#define UIP_UDP UIP_CONF_UDP +#else /* UIP_CONF_UDP */ +#define UIP_UDP 0 +#endif /* UIP_CONF_UDP */ + +/** + * Toggles if UDP checksums should be used or not. + * + * \note Support for UDP checksums is currently not included in uIP, + * so this option has no function. + * + * \hideinitializer + */ +#ifdef UIP_CONF_UDP_CHECKSUMS +#define UIP_UDP_CHECKSUMS UIP_CONF_UDP_CHECKSUMS +#else +#define UIP_UDP_CHECKSUMS 0 +#endif + +/** + * The maximum amount of concurrent UDP connections. + * + * \hideinitializer + */ +#ifdef UIP_CONF_UDP_CONNS +#define UIP_UDP_CONNS UIP_CONF_UDP_CONNS +#else /* UIP_CONF_UDP_CONNS */ +#define UIP_UDP_CONNS 10 +#endif /* UIP_CONF_UDP_CONNS */ + +/** + * The name of the function that should be called when UDP datagrams arrive. + * + * \hideinitializer + */ + +/** @} */ + +/*------------------------------------------------------------------------------*/ + +/** + * \defgroup uipopttcp TCP configuration options + * @{ + */ + +/** + * Toggles whether UDP support should be compiled in or not. + * + * \hideinitializer + */ +#ifdef UIP_CONF_TCP +#define UIP_TCP UIP_CONF_TCP +#else /* UIP_CONF_UDP */ +#define UIP_TCP 1 +#endif /* UIP_CONF_UDP */ + +/** + * Determines if support for opening connections from uIP should be + * compiled in. + * + * If the applications that are running on top of uIP for this project + * do not need to open outgoing TCP connections, this configuration + * option can be turned off to reduce the code size of uIP. + * + * \hideinitializer + */ +#ifndef UIP_CONF_ACTIVE_OPEN +#define UIP_ACTIVE_OPEN 1 +#else /* UIP_CONF_ACTIVE_OPEN */ +#define UIP_ACTIVE_OPEN UIP_CONF_ACTIVE_OPEN +#endif /* UIP_CONF_ACTIVE_OPEN */ + +/** + * The maximum number of simultaneously open TCP connections. + * + * Since the TCP connections are statically allocated, turning this + * configuration knob down results in less RAM used. Each TCP + * connection requires approximately 30 bytes of memory. + * + * \hideinitializer + */ +#ifndef UIP_CONF_MAX_CONNECTIONS +#define UIP_CONNS 10 +#else /* UIP_CONF_MAX_CONNECTIONS */ +#define UIP_CONNS UIP_CONF_MAX_CONNECTIONS +#endif /* UIP_CONF_MAX_CONNECTIONS */ + +/** + * The maximum number of simultaneously listening TCP ports. + * + * Each listening TCP port requires 2 bytes of memory. + * + * \hideinitializer + */ +#ifndef UIP_CONF_MAX_LISTENPORTS +#define UIP_LISTENPORTS 20 +#else /* UIP_CONF_MAX_LISTENPORTS */ +#define UIP_LISTENPORTS UIP_CONF_MAX_LISTENPORTS +#endif /* UIP_CONF_MAX_LISTENPORTS */ + +/** + * Determines if support for TCP urgent data notification should be + * compiled in. + * + * Urgent data (out-of-band data) is a rarely used TCP feature that + * very seldom would be required. + * + * \hideinitializer + */ +#define UIP_URGDATA 0 + +/** + * The initial retransmission timeout counted in timer pulses. + * + * This should not be changed. + */ +#define UIP_RTO 3 + +/** + * The maximum number of times a segment should be retransmitted + * before the connection should be aborted. + * + * This should not be changed. + */ +#define UIP_MAXRTX 8 + +/** + * The maximum number of times a SYN segment should be retransmitted + * before a connection request should be deemed to have been + * unsuccessful. + * + * This should not need to be changed. + */ +#define UIP_MAXSYNRTX 5 + +/** + * The TCP maximum segment size. + * + * This is should not be to set to more than + * UIP_BUFSIZE - UIP_LLH_LEN - UIP_TCPIP_HLEN. + */ +#ifdef UIP_CONF_TCP_MSS +#define UIP_TCP_MSS UIP_CONF_TCP_MSS +#else +#define UIP_TCP_MSS ( UIP_BUFSIZE - UIP_LLH_LEN - UIP_TCPIP_HLEN ) +#endif + +/** + * The size of the advertised receiver's window. + * + * Should be set low (i.e., to the size of the uip_buf buffer) if the + * application is slow to process incoming data, or high (32768 bytes) + * if the application processes data quickly. + * + * \hideinitializer + */ +#ifndef UIP_CONF_RECEIVE_WINDOW +#define UIP_RECEIVE_WINDOW UIP_TCP_MSS +#else +#define UIP_RECEIVE_WINDOW UIP_CONF_RECEIVE_WINDOW +#endif + +/** + * How long a connection should stay in the TIME_WAIT state. + * + * This configuration option has no real implication, and it should be + * left untouched. + */ +#define UIP_TIME_WAIT_TIMEOUT 120 + +/** @} */ + +/*------------------------------------------------------------------------------*/ + +/** + * \defgroup uipoptarp ARP configuration options + * @{ + */ + +/** + * The size of the ARP table. + * + * This option should be set to a larger value if this uIP node will + * have many connections from the local network. + * + * \hideinitializer + */ +#ifdef UIP_CONF_ARPTAB_SIZE +#define UIP_ARPTAB_SIZE UIP_CONF_ARPTAB_SIZE +#else +#define UIP_ARPTAB_SIZE 8 +#endif + +/** + * The maximum age of ARP table entries measured in 10ths of seconds. + * + * An UIP_ARP_MAXAGE of 120 corresponds to 20 minutes (BSD + * default). + */ +#define UIP_ARP_MAXAGE 120 + +/** @} */ + +/*------------------------------------------------------------------------------*/ + +/** + * \defgroup uipoptmac layer 2 options (for ipv6) + * @{ + */ +#define UIP_DEFAULT_PREFIX_LEN 64 + +/** @} */ + +/*------------------------------------------------------------------------------*/ + +/** + * \defgroup uipoptsics 6lowpan options (for ipv6) + * @{ + */ + +/** + * Timeout for packet reassembly at the 6lowpan layer + * (should be < 60s) + */ +#ifdef SICSLOWPAN_CONF_MAXAGE +#define SICSLOWPAN_REASS_MAXAGE SICSLOWPAN_CONF_MAXAGE +#else +#define SICSLOWPAN_REASS_MAXAGE 20 +#endif + +/** + * Do we compress the IP header or not (default: no) + */ +#ifndef SICSLOWPAN_CONF_COMPRESSION +#define SICSLOWPAN_CONF_COMPRESSION 0 +#endif + +/** + * If we use IPHC compression, how many address contexts do we support + */ +#ifndef SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS +#define SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS 1 +#endif + +/** + * Do we support 6lowpan fragmentation + */ +#ifndef SICSLOWPAN_CONF_FRAG +#define SICSLOWPAN_CONF_FRAG 0 +#endif + +/** @} */ + +/*------------------------------------------------------------------------------*/ + +/** + * \defgroup uipoptgeneral General configuration options + * @{ + */ + +/** + * The size of the uIP packet buffer. + * + * The uIP packet buffer should not be smaller than 60 bytes, and does + * not need to be larger than 1514 bytes. Lower size results in lower + * TCP throughput, larger size results in higher TCP throughput. + * + * \hideinitializer + */ +#ifndef UIP_CONF_BUFFER_SIZE +#define UIP_BUFSIZE UIP_LINK_MTU + UIP_LLH_LEN +#else /* UIP_CONF_BUFFER_SIZE */ +#define UIP_BUFSIZE UIP_CONF_BUFFER_SIZE +#endif /* UIP_CONF_BUFFER_SIZE */ + +/** + * Determines if statistics support should be compiled in. + * + * The statistics is useful for debugging and to show the user. + * + * \hideinitializer + */ +#ifndef UIP_CONF_STATISTICS +#define UIP_STATISTICS 0 +#else /* UIP_CONF_STATISTICS */ +#define UIP_STATISTICS UIP_CONF_STATISTICS +#endif /* UIP_CONF_STATISTICS */ + +/** + * Determines if logging of certain events should be compiled in. + * + * This is useful mostly for debugging. The function uip_log() + * must be implemented to suit the architecture of the project, if + * logging is turned on. + * + * \hideinitializer + */ +#ifndef UIP_CONF_LOGGING +#define UIP_LOGGING 0 +#else /* UIP_CONF_LOGGING */ +#define UIP_LOGGING UIP_CONF_LOGGING +#endif /* UIP_CONF_LOGGING */ + +/** + * Broadcast support. + * + * This flag configures IP broadcast support. This is useful only + * together with UDP. + * + * \hideinitializer + * + */ +#ifndef UIP_CONF_BROADCAST +#define UIP_BROADCAST 0 +#else /* UIP_CONF_BROADCAST */ +#define UIP_BROADCAST UIP_CONF_BROADCAST +#endif /* UIP_CONF_BROADCAST */ + +/** + * Print out a uIP log message. + * + * This function must be implemented by the module that uses uIP, and + * is called by uIP whenever a log message is generated. + */ +void uip_log( char *msg ); + +/** + * The link level header length. + * + * This is the offset into the uip_buf where the IP header can be + * found. For Ethernet, this should be set to 14. For SLIP, this + * should be set to 0. + * + * \note we probably won't use this constant for other link layers than + * ethernet as they have variable header length (this is due to variable + * number and type of address fields and to optional security features) + * E.g.: 802.15.4 -> 2 + (1/2*4/8) + 0/5/6/10/14 + * 802.11 -> 4 + (6*3/4) + 2 + * \hideinitializer + */ +#ifdef UIP_CONF_LLH_LEN +#define UIP_LLH_LEN UIP_CONF_LLH_LEN +#else /* UIP_LLH_LEN */ +#define UIP_LLH_LEN 14 +#endif /* UIP_CONF_LLH_LEN */ + +/** @} */ + +/*------------------------------------------------------------------------------*/ + +/** + * \defgroup uipoptcpu CPU architecture configuration + * @{ + * + * The CPU architecture configuration is where the endianess of the + * CPU on which uIP is to be run is specified. Most CPUs today are + * little endian, and the most notable exception are the Motorolas + * which are big endian. The BYTE_ORDER macro should be changed to + * reflect the CPU architecture on which uIP is to be run. + */ + +/** + * The byte order of the CPU architecture on which uIP is to be run. + * + * This option can be either UIP_BIG_ENDIAN (Motorola byte order) or + * UIP_LITTLE_ENDIAN (Intel byte order). + * + * \hideinitializer + */ +#ifdef UIP_CONF_BYTE_ORDER +#define UIP_BYTE_ORDER UIP_CONF_BYTE_ORDER +#else /* UIP_CONF_BYTE_ORDER */ +#define UIP_BYTE_ORDER UIP_LITTLE_ENDIAN +#endif /* UIP_CONF_BYTE_ORDER */ + +/** @} */ + +/*------------------------------------------------------------------------------*/ + +/** + * \defgroup uipoptapp Application specific configurations + * @{ + * + * An uIP application is implemented using a single application + * function that is called by uIP whenever a TCP/IP event occurs. The + * name of this function must be registered with uIP at compile time + * using the UIP_APPCALL definition. + * + * uIP applications can store the application state within the + * uip_conn structure by specifying the type of the application + * structure by typedef:ing the type uip_tcp_appstate_t and uip_udp_appstate_t. + * + * The file containing the definitions must be included in the + * uipopt.h file. + * + * The following example illustrates how this can look. + \code + + void httpd_appcall(void); + #define UIP_APPCALL httpd_appcall + + struct httpd_state { + u8_t state; + u16_t count; + char *dataptr; + char *script; + }; + typedef struct httpd_state uip_tcp_appstate_t + \endcode +*/ + +/** + * \var #define UIP_APPCALL + * + * The name of the application function that uIP should call in + * response to TCP/IP events. + * + */ + +/** + * \var typedef uip_tcp_appstate_t + * + * The type of the application state that is to be stored in the + * uip_conn structure. This usually is typedef:ed to a struct holding + * application state information. + */ + +/** + * \var typedef uip_udp_appstate_t + * + * The type of the application state that is to be stored in the + * uip_conn structure. This usually is typedef:ed to a struct holding + * application state information. + */ + +/** @} */ +#endif /* __UIPOPT_H__ */ + +/** @} */ + +/** @} */ -- cgit v1.3.1