Add more board models

1 files changed, 45 insertions, 0 deletions

diff --git a/boards/dk-tm4c129x/ble_btool/readme.txt b/boards/dk-tm4c129x/ble_btool/readme.txt
new file mode 100644
index 0000000..c19917d
--- /dev/null
+++ b/boards/dk-tm4c129x/ble_btool/readme.txt
@@ -0,0 +1,45 @@
+Bluetooth Low Energy ``BTool''

+

+This application connects the ICDI virtual UART0 with UART3, so that

+the BTool application running on PC can control the CC2540/CC2541 through

+the TM4C129X.

+

+The CC254X device should be programmed with HostTestRelease(Network

+Processor) application.  A hex file containing this application can be

+found in the BLE stack 1.4.0 release under

+C:\\...\\BLE-CC254x-1.4.0\\Accessories\\HexFiles\\

+CC254X_SmartRF_HostTestRelease_All.hex. Please refer to the Bluetooth Low

+Energy CC254X Development Kit User's Guide for information on how to load

+the hex file to the CC254X. This User's Guide can be found in

+http://www.ti.com/lit/ug/swru301a/swru301a.pdf

+

+On the TM4C129X development board, make sure that jumpers PJ0 and PJ1

+are connected to the "EM_UART" side to ensure that the UART3 TX and RX

+signals are routed to the EM header.  UART3 is used to communicate between

+the TM4C129X and the CC2540 device.

+

+BTool is a PC application that allows a user to form a connection between

+two BLE devices. For more details on BTool, please refer to the above

+User's Guide. The installer for BTool is included in the BLE stack 1.4.0

+release under C:\\...\\BLE-CC254x-1.4.0\\Accessories\\BTool\\

+

+

+-------------------------------------------------------------------------------

+

+Copyright (c) 2013-2014 Texas Instruments Incorporated.  All rights reserved.

+Software License Agreement

+

+Texas Instruments (TI) is supplying this software for use solely and

+exclusively on TI's microcontroller products. The software is owned by

+TI and/or its suppliers, and is protected under applicable copyright

+laws. You may not combine this software with "viral" open-source

+software in order to form a larger program.

+

+THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.

+NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT

+NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

+A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY

+CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL

+DAMAGES, FOR ANY REASON WHATSOEVER.

+

+This is part of revision 2.1.0.12573 of the DK-TM4C129X Firmware Package.