Dir structure overhaul

1 files changed, 0 insertions, 78 deletions

diff --git a/project0/project0.icf b/project0/project0.icf
deleted file mode 100644
index 980a972..0000000
--- a/project0/project0.icf
+++ /dev/null
@@ -1,78 +0,0 @@
-//*****************************************************************************

-//

-// project0.icf - Linker configuration file for project0.

-//

-// Copyright (c) 2012 Texas Instruments Incorporated.  All rights reserved.

-// Software License Agreement

-// 

-// Texas Instruments (TI) is supplying this software for use solely and

-// exclusively on TI's microcontroller products. The software is owned by

-// TI and/or its suppliers, and is protected under applicable copyright

-// laws. You may not combine this software with "viral" open-source

-// software in order to form a larger program.

-// 

-// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.

-// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT

-// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

-// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY

-// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL

-// DAMAGES, FOR ANY REASON WHATSOEVER.

-// 

-// This is part of revision 9453 of the EK-LM4F120XL Firmware Package.

-//

-//*****************************************************************************

-

-//

-// Define a memory region that covers the entire 4 GB addressible space of the

-// processor.

-//

-define memory mem with size = 4G;

-

-//

-// Define a region for the on-chip flash.

-//

-define region FLASH = mem:[from 0x00000000 to 0x0003ffff];

-

-//

-// Define a region for the on-chip SRAM.

-//

-define region SRAM = mem:[from 0x20000000 to 0x20007fff];

-

-//

-// Define a block for the heap.  The size should be set to something other

-// than zero if things in the C library that require the heap are used.

-//

-define block HEAP with alignment = 8, size = 0x00000000 { };

-

-//

-// Indicate that the read/write values should be initialized by copying from

-// flash.

-//

-initialize by copy { readwrite };

-

-//

-// Indicate that the noinit values should be left alone.  This includes the

-// stack, which if initialized will destroy the return address from the

-// initialization code, causing the processor to branch to zero and fault.

-//

-do not initialize { section .noinit };

-

-//

-// Place the interrupt vectors at the start of flash.

-//

-place at start of FLASH { readonly section .intvec };

-

-//

-// Place the remainder of the read-only items into flash.

-//

-place in FLASH { readonly };

-

-//

-// Place the RAM vector table at the start of SRAM.

-//

-place at start of SRAM { section VTABLE };

-

-//

-// Place all read/write items into SRAM.

-//

-place in SRAM { readwrite, block HEAP };