diff options
| author | Yuval Adam <yuv.adm@gmail.com> | 2012-10-29 23:04:06 +0200 |
|---|---|---|
| committer | Yuval Adam <yuv.adm@gmail.com> | 2012-10-29 23:04:06 +0200 |
| commit | 48395c0348a1a3fa3330e397d2463f62ff5c45c7 (patch) | |
| tree | 79014820daabff32e6216bc8655a1635a680fab2 | |
| parent | b09e109db5f03993738fe62e9fa82d0b15ee3ec8 (diff) | |
Dir structure overhaul
39 files changed, 0 insertions, 4349 deletions
diff --git a/project0/Makefile b/project0/Makefile deleted file mode 100644 index 2ca4acc..0000000 --- a/project0/Makefile +++ /dev/null @@ -1,91 +0,0 @@ -#******************************************************************************
-#
-# Makefile - Rules for building the Project Zero Example.
-#
-# Copyright (c) 2012 Texas Instruments Incorporated. All rights reserved.
-# Software License Agreement
-#
-# Texas Instruments (TI) is supplying this software for use solely and
-# exclusively on TI's microcontroller products. The software is owned by
-# TI and/or its suppliers, and is protected under applicable copyright
-# laws. You may not combine this software with "viral" open-source
-# software in order to form a larger program.
-#
-# THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
-# NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
-# NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
-# CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
-# DAMAGES, FOR ANY REASON WHATSOEVER.
-#
-# This is part of revision 9453 of the EK-LM4F120XL Firmware Package.
-#
-#******************************************************************************
-
-#
-# Defines the part type that this project uses.
-#
-PART=LM4F120H5QR
-
-#
-# Set the processor variant.
-#
-VARIANT=cm4f
-
-#
-# The base directory for StellarisWare.
-#
-ROOT=..
-
-#
-# Include the common make definitions.
-#
-include ${ROOT}/makedefs
-
-#
-# Where to find source files that do not live in this directory.
-#
-VPATH=../drivers
-VPATH+=../../../utils
-
-#
-# Where to find header files that do not live in the source directory.
-#
-IPATH=..
-IPATH+=../../..
-
-#
-# The default rule, which causes the Project Zero Example to be built.
-#
-all: ${COMPILER}
-all: ${COMPILER}/project0.axf
-
-#
-# The rule to clean out all the build products.
-#
-clean:
- @rm -rf ${COMPILER} ${wildcard *~}
-
-#
-# The rule to create the target directory.
-#
-${COMPILER}:
- @mkdir -p ${COMPILER}
-
-#
-# Rules for building the Project Zero Example.
-#
-${COMPILER}/project0.axf: ${COMPILER}/project0.o
-${COMPILER}/project0.axf: ${COMPILER}/startup_${COMPILER}.o
-${COMPILER}/project0.axf: ${ROOT}/driverlib/${COMPILER}-cm4f/libdriver-cm4f.a
-${COMPILER}/project0.axf: project0.ld
-SCATTERgcc_project0=project0.ld
-ENTRY_project0=ResetISR
-CFLAGSgcc=-DTARGET_IS_BLIZZARD_RA2
-
-#
-# Include the automatically generated dependency files.
-#
-ifneq (${MAKECMDGOALS},clean)
--include ${wildcard ${COMPILER}/*.d} __dummy__
-endif
diff --git a/project0/ccs/.ccsimportspec b/project0/ccs/.ccsimportspec deleted file mode 100644 index a3940d4..0000000 --- a/project0/ccs/.ccsimportspec +++ /dev/null @@ -1,8 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?>
-<importSpec>
- <source root="..">
- <file name="project0.c"/>
- <file regex=".*_ccs\.cmd"/>
- <file name="startup_ccs.c"/>
- </source>
-</importSpec>
diff --git a/project0/ccs/.ccsproject b/project0/ccs/.ccsproject deleted file mode 100644 index 56793f4..0000000 --- a/project0/ccs/.ccsproject +++ /dev/null @@ -1,12 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<?ccsproject version="1.0"?>
-
-<projectOptions>
-<deviceVariant value="Cortex M.LM4F120H5QR"/>
-<deviceFamily value="TMS470"/>
-<deviceEndianness value="little"/>
-<codegenToolVersion value="4.9.5"/>
-<isElfFormat value="true"/>
-<connection value=""/>
-<rts value="libc.a"/>
-</projectOptions>
diff --git a/project0/ccs/.cproject b/project0/ccs/.cproject deleted file mode 100644 index 7e60e98..0000000 --- a/project0/ccs/.cproject +++ /dev/null @@ -1,193 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<?fileVersion 4.0.0?>
-
-<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
- <storageModule moduleId="org.eclipse.cdt.core.settings">
- <cconfiguration id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1835172360">
- <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1835172360" moduleId="org.eclipse.cdt.core.settings" name="Debug">
- <macros>
- <stringMacro name="SW_ROOT" type="VALUE_PATH_DIR" value="${PROJECT_ROOT}/../../../.."/>
- </macros>
- <externalSettings/>
- <extensions>
- <extension id="com.ti.ccstudio.binaryparser.CoffParser" point="org.eclipse.cdt.core.BinaryParser"/>
- <extension id="com.ti.ccstudio.errorparser.CoffErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
- <extension id="com.ti.ccstudio.errorparser.LinkErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
- <extension id="com.ti.ccstudio.errorparser.AsmErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
- </extensions>
- </storageModule>
- <storageModule moduleId="cdtBuildSystem" version="4.0.0">
- <configuration artifactExtension="out" artifactName="${ProjName}" buildProperties="" cleanCommand="${CG_CLEAN_CMD}" description="" id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1835172360" name="Debug" parent="com.ti.ccstudio.buildDefinitions.TMS470.Debug" postbuildStep=""${CCE_INSTALL_ROOT}/utils/tiobj2bin/tiobj2bin" "${BuildArtifactFileName}" "${BuildArtifactFileBaseName}.bin" "${CG_TOOL_ROOT}/bin/ofd470" "${CG_TOOL_ROOT}/bin/hex470" "${CCE_INSTALL_ROOT}/utils/tiobj2bin/mkhex4bin"">
- <folderInfo id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1835172360." name="/" resourcePath="">
- <toolChain id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.exe.DebugToolchain.735647688" name="TI Build Tools" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.exe.DebugToolchain" targetTool="com.ti.ccstudio.buildDefinitions.TMS470_4.9.exe.linkerDebug.637918715">
- <option id="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS.1016712738" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS" valueType="stringList">
- <listOptionValue builtIn="false" value="DEVICE_CONFIGURATION_ID=Cortex M.LM4F120H5QR"/>
- <listOptionValue builtIn="false" value="DEVICE_ENDIANNESS=little"/>
- <listOptionValue builtIn="false" value="OUTPUT_FORMAT=ELF"/>
- <listOptionValue builtIn="false" value="CCS_MBS_VERSION=5.1.0.01"/>
- <listOptionValue builtIn="false" value="RUNTIME_SUPPORT_LIBRARY=libc.a"/>
- <listOptionValue builtIn="false" value="OUTPUT_TYPE=executable"/>
- </option>
- <option id="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION.1146626505" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION" value="4.9.5" valueType="string"/>
- <targetPlatform id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.exe.targetPlatformDebug.1546873011" name="Platform" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.exe.targetPlatformDebug"/>
- <builder buildPath="${BuildDirectory}" id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.exe.builderDebug.1028411084" name="GNU Make.Debug" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.exe.builderDebug"/>
- <tool id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.exe.compilerDebug.6845598" name="ARM Compiler" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.exe.compilerDebug">
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.SILICON_VERSION.1935934088" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.SILICON_VERSION" value="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.SILICON_VERSION.7M4" valueType="enumerated"/>
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.CODE_STATE.1291035187" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.CODE_STATE" value="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.CODE_STATE.16" valueType="enumerated"/>
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.ABI.294973872" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.ABI" value="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.ABI.eabi" valueType="enumerated"/>
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.FLOAT_SUPPORT.1228335254" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.FLOAT_SUPPORT" value="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.FLOAT_SUPPORT.FPv4SPD16" valueType="enumerated"/>
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.DEBUGGING_MODEL.1099357815" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.DEBUGGING_MODEL" value="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.DEBUGGING_MODEL.SYMDEBUG__DWARF" valueType="enumerated"/>
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.DIAG_WARNING.963255708" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.DIAG_WARNING" valueType="stringList">
- <listOptionValue builtIn="false" value="225"/>
- </option>
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.DISPLAY_ERROR_NUMBER.1607120221" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.INCLUDE_PATH.1645036701" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.INCLUDE_PATH" valueType="includePath">
- <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
- <listOptionValue builtIn="false" value=""${SW_ROOT}/boards/ek-lm4f120xl""/>
- <listOptionValue builtIn="false" value=""${SW_ROOT}""/>
- </option>
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.LITTLE_ENDIAN.229864396" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.LITTLE_ENDIAN" value="true" valueType="boolean"/>
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.GEN_FUNC_SUBSECTIONS.983616835" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.GEN_FUNC_SUBSECTIONS" value="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.GEN_FUNC_SUBSECTIONS.on" valueType="enumerated"/>
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.OPT_LEVEL.165543231" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.OPT_LEVEL" value="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.OPT_LEVEL.2" valueType="enumerated"/>
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.GCC.663529283" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.GCC" value="true" valueType="boolean"/>
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.UAL.1597415839" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.UAL" value="true" valueType="boolean"/>
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.DEFINE.1746539742" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.DEFINE" valueType="definedSymbols">
- <listOptionValue builtIn="false" value="ccs="ccs""/>
- <listOptionValue builtIn="false" value="PART_LM4F120H5QR"/>
- <listOptionValue builtIn="false" value="TARGET_IS_BLIZZARD_RA2"/>
- </option>
- <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compiler.inputType__C_SRCS.349574899" name="C Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compiler.inputType__C_SRCS"/>
- <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compiler.inputType__CPP_SRCS.1208218083" name="C++ Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compiler.inputType__CPP_SRCS"/>
- <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compiler.inputType__ASM_SRCS.1622024232" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compiler.inputType__ASM_SRCS"/>
- <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compiler.inputType__ASM2_SRCS.2127337764" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compiler.inputType__ASM2_SRCS"/>
- </tool>
- <tool id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.exe.linkerDebug.637918715" name="ARM Linker" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.exe.linkerDebug">
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.linkerID.MAP_FILE.535273242" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.linkerID.MAP_FILE" value=""project0_ccs.map"" valueType="string"/>
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.linkerID.STACK_SIZE.1685291543" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.linkerID.STACK_SIZE" value="256" valueType="string"/>
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.linkerID.HEAP_SIZE.902596268" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.linkerID.HEAP_SIZE" value="0" valueType="string"/>
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.linkerID.OUTPUT_FILE.228548514" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.linkerID.OUTPUT_FILE" value=""${ProjName}.out"" valueType="string"/>
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.linkerID.DISPLAY_ERROR_NUMBER.1264116850" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.linkerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.linkerID.SEARCH_PATH.1757016192" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.linkerID.SEARCH_PATH" valueType="stringList">
- <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/lib""/>
- <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
- </option>
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.linkerID.LIBRARY.1804880214" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.linkerID.LIBRARY" valueType="libs">
- <listOptionValue builtIn="false" value=""libc.a""/>
- <listOptionValue builtIn="false" value=""${SW_ROOT}/driverlib/ccs-cm4f/Debug/driverlib-cm4f.lib""/>
- </option>
- </tool>
- </toolChain>
- </folderInfo>
- </configuration>
- </storageModule>
- <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
- </cconfiguration>
- <cconfiguration id="com.ti.ccstudio.buildDefinitions.TMS470.Release.87993350">
- <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.ti.ccstudio.buildDefinitions.TMS470.Release.87993350" moduleId="org.eclipse.cdt.core.settings" name="Release">
- <macros>
- <stringMacro name="SW_ROOT" type="VALUE_PATH_DIR" value="${PROJECT_ROOT}/../../../.."/>
- </macros>
- <externalSettings/>
- <extensions>
- <extension id="com.ti.ccstudio.binaryparser.CoffParser" point="org.eclipse.cdt.core.BinaryParser"/>
- <extension id="com.ti.ccstudio.errorparser.CoffErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
- <extension id="com.ti.ccstudio.errorparser.LinkErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
- <extension id="com.ti.ccstudio.errorparser.AsmErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
- </extensions>
- </storageModule>
- <storageModule moduleId="cdtBuildSystem" version="4.0.0">
- <configuration artifactExtension="out" artifactName="${ProjName}" buildProperties="" cleanCommand="${CG_CLEAN_CMD}" description="" id="com.ti.ccstudio.buildDefinitions.TMS470.Release.87993350" name="Release" parent="com.ti.ccstudio.buildDefinitions.TMS470.Release" postbuildStep=""${CCE_INSTALL_ROOT}/utils/tiobj2bin/tiobj2bin" "${BuildArtifactFileName}" "${BuildArtifactFileBaseName}.bin" "${CG_TOOL_ROOT}/bin/ofd470" "${CG_TOOL_ROOT}/bin/hex470" "${CCE_INSTALL_ROOT}/utils/tiobj2bin/mkhex4bin"">
- <folderInfo id="com.ti.ccstudio.buildDefinitions.TMS470.Release.87993350." name="/" resourcePath="">
- <toolChain id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.exe.ReleaseToolchain.1408634035" name="TI Build Tools" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.exe.ReleaseToolchain" targetTool="com.ti.ccstudio.buildDefinitions.TMS470_4.9.exe.linkerRelease.1541604295">
- <option id="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS.1729326865" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS" valueType="stringList">
- <listOptionValue builtIn="false" value="DEVICE_CONFIGURATION_ID=Cortex M.LM4F120H5QR"/>
- <listOptionValue builtIn="false" value="DEVICE_ENDIANNESS=little"/>
- <listOptionValue builtIn="false" value="OUTPUT_FORMAT=ELF"/>
- <listOptionValue builtIn="false" value="CCS_MBS_VERSION=5.1.0.01"/>
- <listOptionValue builtIn="false" value="RUNTIME_SUPPORT_LIBRARY=libc.a"/>
- <listOptionValue builtIn="false" value="OUTPUT_TYPE=executable"/>
- </option>
- <option id="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION.1457303932" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION" value="4.9.5" valueType="string"/>
- <targetPlatform id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.exe.targetPlatformRelease.444162117" name="Platform" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.exe.targetPlatformRelease"/>
- <builder buildPath="${BuildDirectory}" id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.exe.builderRelease.853928149" name="GNU Make.Release" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.exe.builderRelease"/>
- <tool id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.exe.compilerRelease.1803079425" name="ARM Compiler" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.exe.compilerRelease">
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.SILICON_VERSION.1452245210" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.SILICON_VERSION" value="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.SILICON_VERSION.7M4" valueType="enumerated"/>
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.CODE_STATE.255313322" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.CODE_STATE" value="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.CODE_STATE.16" valueType="enumerated"/>
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.ABI.1981156076" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.ABI" value="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.ABI.eabi" valueType="enumerated"/>
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.FLOAT_SUPPORT.883013763" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.FLOAT_SUPPORT" value="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.FLOAT_SUPPORT.FPv4SPD16" valueType="enumerated"/>
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.DIAG_WARNING.428862693" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.DIAG_WARNING" valueType="stringList">
- <listOptionValue builtIn="false" value="225"/>
- </option>
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.DISPLAY_ERROR_NUMBER.275845875" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.INCLUDE_PATH.471732208" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.INCLUDE_PATH" valueType="includePath">
- <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
- <listOptionValue builtIn="false" value=""${SW_ROOT}/boards/ek-lm4f120xl""/>
- <listOptionValue builtIn="false" value=""${SW_ROOT}""/>
- </option>
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.LITTLE_ENDIAN.376537501" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.LITTLE_ENDIAN" value="true" valueType="boolean"/>
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.GEN_FUNC_SUBSECTIONS.208415878" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.GEN_FUNC_SUBSECTIONS" value="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.GEN_FUNC_SUBSECTIONS.on" valueType="enumerated"/>
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.GCC.1529876754" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.GCC" value="true" valueType="boolean"/>
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.UAL.1861196022" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.UAL" value="true" valueType="boolean"/>
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.DEFINE.1403000817" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compilerID.DEFINE" valueType="definedSymbols">
- <listOptionValue builtIn="false" value="ccs="ccs""/>
- <listOptionValue builtIn="false" value="PART_LM4F120H5QR"/>
- <listOptionValue builtIn="false" value="TARGET_IS_BLIZZARD_RA2"/>
- </option>
- <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compiler.inputType__C_SRCS.1243659757" name="C Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compiler.inputType__C_SRCS"/>
- <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compiler.inputType__CPP_SRCS.1763650865" name="C++ Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compiler.inputType__CPP_SRCS"/>
- <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compiler.inputType__ASM_SRCS.766410837" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compiler.inputType__ASM_SRCS"/>
- <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compiler.inputType__ASM2_SRCS.1009872645" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.compiler.inputType__ASM2_SRCS"/>
- </tool>
- <tool id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.exe.linkerRelease.1541604295" name="ARM Linker" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.exe.linkerRelease">
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.linkerID.MAP_FILE.483101051" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.linkerID.MAP_FILE" value=""project0_ccs.map"" valueType="string"/>
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.linkerID.STACK_SIZE.1574252329" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.linkerID.STACK_SIZE" value="256" valueType="string"/>
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.linkerID.HEAP_SIZE.1882669692" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.linkerID.HEAP_SIZE" value="0" valueType="string"/>
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.linkerID.OUTPUT_FILE.867404651" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.linkerID.OUTPUT_FILE" value=""${ProjName}.out"" valueType="string"/>
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.linkerID.DISPLAY_ERROR_NUMBER.1910020154" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.linkerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.linkerID.SEARCH_PATH.392260041" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.linkerID.SEARCH_PATH" valueType="stringList">
- <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/lib""/>
- <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
- </option>
- <option id="com.ti.ccstudio.buildDefinitions.TMS470_4.9.linkerID.LIBRARY.374208202" superClass="com.ti.ccstudio.buildDefinitions.TMS470_4.9.linkerID.LIBRARY" valueType="libs">
- <listOptionValue builtIn="false" value=""libc.a""/>
- <listOptionValue builtIn="false" value=""${SW_ROOT}/driverlib/ccs-cm4f/Debug/driverlib-cm4f.lib""/>
- </option>
- </tool>
- </toolChain>
- </folderInfo>
- </configuration>
- </storageModule>
- <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
- </cconfiguration>
- </storageModule>
- <storageModule moduleId="cdtBuildSystem" version="4.0.0">
- <project id="project0.com.ti.ccstudio.buildDefinitions.TMS470.ProjectType.1673461371" name="ARM" projectType="com.ti.ccstudio.buildDefinitions.TMS470.ProjectType"/>
- </storageModule>
- <storageModule moduleId="scannerConfiguration">
- <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
- <scannerConfigBuildInfo instanceId="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1835172360;com.ti.ccstudio.buildDefinitions.TMS470.Debug.1835172360.;com.ti.ccstudio.buildDefinitions.TMS470_4.9.exe.compilerDebug.6845598;com.ti.ccstudio.buildDefinitions.TMS470_4.9.compiler.inputType__ASM2_SRCS.2127337764">
- <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="com.ti.ccstudio.project.core.CCSScannerDiscoveryProfile"/>
- </scannerConfigBuildInfo>
- <scannerConfigBuildInfo instanceId="com.ti.ccstudio.buildDefinitions.TMS470.Release.87993350;com.ti.ccstudio.buildDefinitions.TMS470.Release.87993350.;com.ti.ccstudio.buildDefinitions.TMS470_4.9.exe.compilerRelease.1803079425;com.ti.ccstudio.buildDefinitions.TMS470_4.9.compiler.inputType__ASM_SRCS.766410837">
- <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="com.ti.ccstudio.project.core.CCSScannerDiscoveryProfile"/>
- </scannerConfigBuildInfo>
- <scannerConfigBuildInfo instanceId="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1835172360;com.ti.ccstudio.buildDefinitions.TMS470.Debug.1835172360.;com.ti.ccstudio.buildDefinitions.TMS470_4.9.exe.compilerDebug.6845598;com.ti.ccstudio.buildDefinitions.TMS470_4.9.compiler.inputType__CPP_SRCS.1208218083">
- <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="com.ti.ccstudio.project.core.CCSScannerDiscoveryProfile"/>
- </scannerConfigBuildInfo>
- <scannerConfigBuildInfo instanceId="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1835172360;com.ti.ccstudio.buildDefinitions.TMS470.Debug.1835172360.;com.ti.ccstudio.buildDefinitions.TMS470_4.9.exe.compilerDebug.6845598;com.ti.ccstudio.buildDefinitions.TMS470_4.9.compiler.inputType__C_SRCS.349574899">
- <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="com.ti.ccstudio.project.core.CCSScannerDiscoveryProfile"/>
- </scannerConfigBuildInfo>
- <scannerConfigBuildInfo instanceId="com.ti.ccstudio.buildDefinitions.TMS470.Release.87993350;com.ti.ccstudio.buildDefinitions.TMS470.Release.87993350.;com.ti.ccstudio.buildDefinitions.TMS470_4.9.exe.compilerRelease.1803079425;com.ti.ccstudio.buildDefinitions.TMS470_4.9.compiler.inputType__CPP_SRCS.1763650865">
- <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="com.ti.ccstudio.project.core.CCSScannerDiscoveryProfile"/>
- </scannerConfigBuildInfo>
- <scannerConfigBuildInfo instanceId="com.ti.ccstudio.buildDefinitions.TMS470.Release.87993350;com.ti.ccstudio.buildDefinitions.TMS470.Release.87993350.;com.ti.ccstudio.buildDefinitions.TMS470_4.9.exe.compilerRelease.1803079425;com.ti.ccstudio.buildDefinitions.TMS470_4.9.compiler.inputType__C_SRCS.1243659757">
- <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="com.ti.ccstudio.project.core.CCSScannerDiscoveryProfile"/>
- </scannerConfigBuildInfo>
- <scannerConfigBuildInfo instanceId="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1835172360;com.ti.ccstudio.buildDefinitions.TMS470.Debug.1835172360.;com.ti.ccstudio.buildDefinitions.TMS470_4.9.exe.compilerDebug.6845598;com.ti.ccstudio.buildDefinitions.TMS470_4.9.compiler.inputType__ASM_SRCS.1622024232">
- <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="com.ti.ccstudio.project.core.CCSScannerDiscoveryProfile"/>
- </scannerConfigBuildInfo>
- <scannerConfigBuildInfo instanceId="com.ti.ccstudio.buildDefinitions.TMS470.Release.87993350;com.ti.ccstudio.buildDefinitions.TMS470.Release.87993350.;com.ti.ccstudio.buildDefinitions.TMS470_4.9.exe.compilerRelease.1803079425;com.ti.ccstudio.buildDefinitions.TMS470_4.9.compiler.inputType__ASM2_SRCS.1009872645">
- <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="com.ti.ccstudio.project.core.CCSScannerDiscoveryProfile"/>
- </scannerConfigBuildInfo>
- </storageModule>
-</cproject>
diff --git a/project0/ccs/.project b/project0/ccs/.project deleted file mode 100644 index 37096d0..0000000 --- a/project0/ccs/.project +++ /dev/null @@ -1,106 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?>
-<projectDescription>
- <name>project0</name>
- <comment></comment>
- <projects>
- </projects>
- <buildSpec>
- <buildCommand>
- <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
- <arguments>
- <dictionary>
- <key>?name?</key>
- <value></value>
- </dictionary>
- <dictionary>
- <key>org.eclipse.cdt.make.core.append_environment</key>
- <value>true</value>
- </dictionary>
- <dictionary>
- <key>org.eclipse.cdt.make.core.autoBuildTarget</key>
- <value>all</value>
- </dictionary>
- <dictionary>
- <key>org.eclipse.cdt.make.core.buildArguments</key>
- <value>-k</value>
- </dictionary>
- <dictionary>
- <key>org.eclipse.cdt.make.core.buildCommand</key>
- <value>${CCS_UTILS_DIR}/bin/gmake</value>
- </dictionary>
- <dictionary>
- <key>org.eclipse.cdt.make.core.buildLocation</key>
- <value>${BuildDirectory}</value>
- </dictionary>
- <dictionary>
- <key>org.eclipse.cdt.make.core.cleanBuildTarget</key>
- <value>clean</value>
- </dictionary>
- <dictionary>
- <key>org.eclipse.cdt.make.core.contents</key>
- <value>org.eclipse.cdt.make.core.activeConfigSettings</value>
- </dictionary>
- <dictionary>
- <key>org.eclipse.cdt.make.core.enableAutoBuild</key>
- <value>true</value>
- </dictionary>
- <dictionary>
- <key>org.eclipse.cdt.make.core.enableCleanBuild</key>
- <value>true</value>
- </dictionary>
- <dictionary>
- <key>org.eclipse.cdt.make.core.enableFullBuild</key>
- <value>true</value>
- </dictionary>
- <dictionary>
- <key>org.eclipse.cdt.make.core.fullBuildTarget</key>
- <value>all</value>
- </dictionary>
- <dictionary>
- <key>org.eclipse.cdt.make.core.stopOnError</key>
- <value>false</value>
- </dictionary>
- <dictionary>
- <key>org.eclipse.cdt.make.core.useDefaultBuildCmd</key>
- <value>true</value>
- </dictionary>
- </arguments>
- </buildCommand>
- <buildCommand>
- <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
- <triggers>full,incremental,</triggers>
- <arguments>
- </arguments>
- </buildCommand>
- </buildSpec>
- <natures>
- <nature>com.ti.ccstudio.core.ccsNature</nature>
- <nature>org.eclipse.cdt.core.cnature</nature>
- <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
- <nature>org.eclipse.cdt.core.ccnature</nature>
- <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
- </natures>
- <linkedResources>
- <link>
- <name>project0.c</name>
- <type>1</type>
- <locationURI>SW_ROOT/boards/ek-lm4f120xl/project0/project0.c</locationURI>
- </link>
- <link>
- <name>project0_ccs.cmd</name>
- <type>1</type>
- <locationURI>SW_ROOT/boards/ek-lm4f120xl/project0/project0_ccs.cmd</locationURI>
- </link>
- <link>
- <name>startup_ccs.c</name>
- <type>1</type>
- <locationURI>SW_ROOT/boards/ek-lm4f120xl/project0/startup_ccs.c</locationURI>
- </link>
- </linkedResources>
- <variableList>
- <variable>
- <name>SW_ROOT</name>
- <value>$%7BPARENT-4-PROJECT_LOC%7D</value>
- </variable>
- </variableList>
-</projectDescription>
diff --git a/project0/ccs/.settings/org.eclipse.cdt.codan.core.prefs b/project0/ccs/.settings/org.eclipse.cdt.codan.core.prefs deleted file mode 100644 index 98b6350..0000000 --- a/project0/ccs/.settings/org.eclipse.cdt.codan.core.prefs +++ /dev/null @@ -1,3 +0,0 @@ -eclipse.preferences.version=1
-inEditor=false
-onBuild=false
diff --git a/project0/ccs/Debug/project0.bin b/project0/ccs/Debug/project0.bin Binary files differdeleted file mode 100644 index 1516fbb..0000000 --- a/project0/ccs/Debug/project0.bin +++ /dev/null diff --git a/project0/ccs/Debug/project0.out b/project0/ccs/Debug/project0.out Binary files differdeleted file mode 100644 index 824a460..0000000 --- a/project0/ccs/Debug/project0.out +++ /dev/null diff --git a/project0/ccs/macros.ini_initial b/project0/ccs/macros.ini_initial deleted file mode 100644 index 588017d..0000000 --- a/project0/ccs/macros.ini_initial +++ /dev/null @@ -1 +0,0 @@ -SW_ROOT = ../../../..
diff --git a/project0/ccs/target_config.ccxml b/project0/ccs/target_config.ccxml deleted file mode 100644 index 469eea0..0000000 --- a/project0/ccs/target_config.ccxml +++ /dev/null @@ -1,13 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<configurations XML_version="1.2" id="configurations_0">
- <configuration XML_version="1.2" id="Stellaris In-Circuit Debug Interface_0">
- <instance XML_version="1.2" desc="Stellaris In-Circuit Debug Interface_0" href="connections/Stellaris_ICDI_Connection.xml" id="Stellaris In-Circuit Debug Interface_0" xml="Stellaris_ICDI_Connection.xml" xmlpath="connections"/>
- <connection XML_version="1.2" id="Stellaris In-Circuit Debug Interface_0">
- <instance XML_version="1.2" href="drivers/stellaris_cs_dap.xml" id="drivers" xml="stellaris_cs_dap.xml" xmlpath="drivers"/>
- <instance XML_version="1.2" href="drivers/stellaris_cortex_m4.xml" id="drivers" xml="stellaris_cortex_m4.xml" xmlpath="drivers"/>
- <platform XML_version="1.2" id="platform_0">
- <instance XML_version="1.2" desc="Stellaris LM4F120H5QR_0" href="devices/lm4f120h5qr.xml" id="Stellaris LM4F120H5QR_0" xml="lm4f120h5qr.xml" xmlpath="devices"/>
- </platform>
- </connection>
- </configuration>
-</configurations>
diff --git a/project0/ewarm/Exe/project0.bin b/project0/ewarm/Exe/project0.bin Binary files differdeleted file mode 100644 index 178c12d..0000000 --- a/project0/ewarm/Exe/project0.bin +++ /dev/null diff --git a/project0/ewarm/Exe/project0.out b/project0/ewarm/Exe/project0.out Binary files differdeleted file mode 100644 index df3dbdf..0000000 --- a/project0/ewarm/Exe/project0.out +++ /dev/null diff --git a/project0/gcc/project0.axf b/project0/gcc/project0.axf Binary files differdeleted file mode 100755 index 6ce6973..0000000 --- a/project0/gcc/project0.axf +++ /dev/null diff --git a/project0/gcc/project0.bin b/project0/gcc/project0.bin Binary files differdeleted file mode 100755 index a9847a8..0000000 --- a/project0/gcc/project0.bin +++ /dev/null diff --git a/project0/gcc/project0.d b/project0/gcc/project0.d deleted file mode 100644 index b10333b..0000000 --- a/project0/gcc/project0.d +++ /dev/null @@ -1,2 +0,0 @@ -gcc/project0.o: project0.c ../inc/hw_types.h ../inc/hw_memmap.h \ - ../driverlib/sysctl.h ../driverlib/gpio.h ../driverlib/pin_map.h diff --git a/project0/gcc/project0.o b/project0/gcc/project0.o Binary files differdeleted file mode 100644 index fc32eaa..0000000 --- a/project0/gcc/project0.o +++ /dev/null diff --git a/project0/gcc/startup_gcc.d b/project0/gcc/startup_gcc.d deleted file mode 100644 index 90778fb..0000000 --- a/project0/gcc/startup_gcc.d +++ /dev/null @@ -1 +0,0 @@ -gcc/startup_gcc.o: startup_gcc.c ../inc/hw_nvic.h ../inc/hw_types.h diff --git a/project0/gcc/startup_gcc.o b/project0/gcc/startup_gcc.o Binary files differdeleted file mode 100644 index cf55879..0000000 --- a/project0/gcc/startup_gcc.o +++ /dev/null diff --git a/project0/project0.c b/project0/project0.c deleted file mode 100644 index 02e2b34..0000000 --- a/project0/project0.c +++ /dev/null @@ -1,112 +0,0 @@ -//*****************************************************************************
-//
-// project0.c - Example to demonstrate minimal StellarisWare setup
-//
-// Copyright (c) 2012 Texas Instruments Incorporated. All rights reserved.
-// Software License Agreement
-//
-// Texas Instruments (TI) is supplying this software for use solely and
-// exclusively on TI's microcontroller products. The software is owned by
-// TI and/or its suppliers, and is protected under applicable copyright
-// laws. You may not combine this software with "viral" open-source
-// software in order to form a larger program.
-//
-// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
-// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
-// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
-// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
-// DAMAGES, FOR ANY REASON WHATSOEVER.
-//
-// This is part of revision 9453 of the EK-LM4F120XL Firmware Package.
-//
-//*****************************************************************************
-
-#include "inc/hw_types.h"
-#include "inc/hw_memmap.h"
-#include "driverlib/sysctl.h"
-#include "driverlib/gpio.h"
-
-//*****************************************************************************
-//
-// Define pin to LED color mapping.
-//
-//*****************************************************************************
-
-#define RED_LED GPIO_PIN_1
-#define BLUE_LED GPIO_PIN_2
-#define GREEN_LED GPIO_PIN_3
-
-//*****************************************************************************
-//
-//! \addtogroup example_list
-//! <h1>Project Zero (project0)</h1>
-//!
-//! This example demonstrates the use of StellarisWare to setup the clocks
-//! and toggle GPIO pins to make the LED's blink. This is a good place to
-//! start understanding your launchpad and the tools that can be used to
-//! program it. See http://www.ti.com/stellaris-launchpad/project0 for more
-//! information and tutorial videos.
-//!
-//
-//*****************************************************************************
-
-
-//*****************************************************************************
-//
-// Main 'C' Language entry point. Toggle an LED using StellarisWare.
-// See www.ti.com/stellaris-launchpad/project0 for more information and
-// tutorial videos.
-//
-//*****************************************************************************
-int
-main(void)
-{
- //
- // Setup the system clock to run at 50 Mhz from PLL with crystal reference
- //
- SysCtlClockSet(SYSCTL_SYSDIV_4|SYSCTL_USE_PLL|SYSCTL_XTAL_16MHZ|
- SYSCTL_OSC_MAIN);
-
- //
- // Enable and configure the GPIO port for the LED operation.
- //
- SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOF);
- GPIOPinTypeGPIOOutput(GPIO_PORTF_BASE, RED_LED|BLUE_LED|GREEN_LED);
-
- //
- // Loop Forever
- //
- while(1)
- {
- //
- // Turn on the LED
- //
- GPIOPinWrite(GPIO_PORTF_BASE, RED_LED|BLUE_LED|GREEN_LED, RED_LED);
-
- //
- // Delay for a bit
- //
- SysCtlDelay(2000000);
-
- //
- // Turn on the LED
- //
- GPIOPinWrite(GPIO_PORTF_BASE, RED_LED|BLUE_LED|GREEN_LED, BLUE_LED);
-
- //
- // Delay for a bit
- //
- SysCtlDelay(2000000);
-
- //
- // Turn on the LED
- //
- GPIOPinWrite(GPIO_PORTF_BASE, RED_LED|BLUE_LED|GREEN_LED, GREEN_LED);
-
- //
- // Delay for a bit
- //
- SysCtlDelay(2000000);
- }
-}
diff --git a/project0/project0.ewd b/project0/project0.ewd deleted file mode 100644 index b8eeac7..0000000 --- a/project0/project0.ewd +++ /dev/null @@ -1,614 +0,0 @@ -<?xml version="1.0" encoding="iso-8859-1"?>
-
-<project>
- <fileVersion>1</fileVersion>
- <configuration>
- <name>Debug</name>
- <toolchain>
- <name>ARM</name>
- </toolchain>
- <debug>1</debug>
- <settings>
- <name>C-SPY</name>
- <archiveVersion>2</archiveVersion>
- <data>
- <version>15</version>
- <wantNonLocal>1</wantNonLocal>
- <debug>1</debug>
- <option>
- <name>CInput</name>
- <state>1</state>
- </option>
- <option>
- <name>CEndian</name>
- <state>1</state>
- </option>
- <option>
- <name>CProcessor</name>
- <state>1</state>
- </option>
- <option>
- <name>OCVariant</name>
- <state>0</state>
- </option>
- <option>
- <name>MacOverride</name>
- <state>0</state>
- </option>
- <option>
- <name>MacFile</name>
- <state></state>
- </option>
- <option>
- <name>MemOverride</name>
- <state>0</state>
- </option>
- <option>
- <name>MemFile</name>
- <state>$TOOLKIT_DIR$\CONFIG\debugger\TexasInstruments\lm4f120h5qr.svd.xml</state>
- </option>
- <option>
- <name>RunToEnable</name>
- <state>1</state>
- </option>
- <option>
- <name>RunToName</name>
- <state>main</state>
- </option>
- <option>
- <name>CExtraOptionsCheck</name>
- <state>0</state>
- </option>
- <option>
- <name>CExtraOptions</name>
- <state></state>
- </option>
- <option>
- <name>CFpuProcessor</name>
- <state>1</state>
- </option>
- <option>
- <name>OCDDFArgumentProducer</name>
- <state></state>
- </option>
- <option>
- <name>OCDownloadSuppressDownload</name>
- <state>0</state>
- </option>
- <option>
- <name>OCDownloadVerifyAll</name>
- <state>1</state>
- </option>
- <option>
- <name>OCProductVersion</name>
- <state>5.11.0.50579</state>
- </option>
- <option>
- <name>OCDynDriverList</name>
- <state>LMIFTDI_ID</state>
- </option>
- <option>
- <name>OCLastSavedByProductVersion</name>
- <state>5.11.0.50579</state>
- </option>
- <option>
- <name>OCDownloadAttachToProgram</name>
- <state>0</state>
- </option>
- <option>
- <name>FlashLoaders</name>
- <state>,,,,(default),</state>
- </option>
- <option>
- <name>UseFlashLoader</name>
- <state>1</state>
- </option>
- <option>
- <name>CLowLevel</name>
- <state>1</state>
- </option>
- <option>
- <name>OCBE8Slave</name>
- <state>1</state>
- </option>
- </data>
- </settings>
- <settings>
- <name>ARMSIM_ID</name>
- <archiveVersion>2</archiveVersion>
- <data>
- <version>1</version>
- <wantNonLocal>1</wantNonLocal>
- <debug>1</debug>
- <option>
- <name>OCSimDriverInfo</name>
- <state>1</state>
- </option>
- <option>
- <name>OCSimEnablePSP</name>
- <state>0</state>
- </option>
- <option>
- <name>OCSimPspOverrideConfig</name>
- <state>0</state>
- </option>
- <option>
- <name>OCSimPspConfigFile</name>
- <state></state>
- </option>
- </data>
- </settings>
- <settings>
- <name>ANGEL_ID</name>
- <archiveVersion>2</archiveVersion>
- <data>
- <version>0</version>
- <wantNonLocal>1</wantNonLocal>
- <debug>1</debug>
- <option>
- <name>CCAngelHeartbeat</name>
- <state>1</state>
- </option>
- <option>
- <name>CAngelCommunication</name>
- <state>1</state>
- </option>
- <option>
- <name>CAngelCommBaud</name>
- <version>0</version>
- <state>3</state>
- </option>
- <option>
- <name>CAngelCommPort</name>
- <version>0</version>
- <state>0</state>
- </option>
- <option>
- <name>ANGELTCPIP</name>
- <state>aaa.bbb.ccc.ddd</state>
- </option>
- <option>
- <name>DoAngelLogfile</name>
- <state>0</state>
- </option>
- <option>
- <name>AngelLogFile</name>
- <state>$TOOLKIT_DIR$\cspycomm.log</state>
- </option>
- <option>
- <name>OCDriverInfo</name>
- <state>1</state>
- </option>
- </data>
- </settings>
- <settings>
- <name>GDBSERVER_ID</name>
- <archiveVersion>2</archiveVersion>
- <data>
- <version>0</version>
- <wantNonLocal>1</wantNonLocal>
- <debug>1</debug>
- <option>
- <name>OCDriverInfo</name>
- <state>1</state>
- </option>
- <option>
- <name>TCPIP</name>
- <state>aaa.bbb.ccc.ddd</state>
- </option>
- <option>
- <name>DoLogfile</name>
- <state>0</state>
- </option>
- <option>
- <name>LogFile</name>
- <state>$TOOLKIT_DIR$\cspycomm.log</state>
- </option>
- <option>
- <name>CCJTagBreakpointRadio</name>
- <state>0</state>
- </option>
- <option>
- <name>CCJTagDoUpdateBreakpoints</name>
- <state>0</state>
- </option>
- <option>
- <name>CCJTagUpdateBreakpoints</name>
- <state>main</state>
- </option>
- </data>
- </settings>
- <settings>
- <name>IARROM_ID</name>
- <archiveVersion>2</archiveVersion>
- <data>
- <version>0</version>
- <wantNonLocal>1</wantNonLocal>
- <debug>1</debug>
- <option>
- <name>CRomLogFileCheck</name>
- <state>0</state>
- </option>
- <option>
- <name>CRomLogFileEditB</name>
- <state>$TOOLKIT_DIR$\cspycomm.log</state>
- </option>
- <option>
- <name>CRomCommunication</name>
- <state>0</state>
- </option>
- <option>
- <name>CRomCommPort</name>
- <version>0</version>
- <state>0</state>
- </option>
- <option>
- <name>CRomCommBaud</name>
- <version>0</version>
- <state>7</state>
- </option>
- <option>
- <name>OCDriverInfo</name>
- <state>1</state>
- </option>
- </data>
- </settings>
- <settings>
- <name>JLINK_ID</name>
- <archiveVersion>2</archiveVersion>
- <data>
- <version>9</version>
- <wantNonLocal>1</wantNonLocal>
- <debug>1</debug>
- <option>
- <name>JLinkSpeed</name>
- <state>32</state>
- </option>
- <option>
- <name>CCJLinkDoLogfile</name>
- <state>0</state>
- </option>
- <option>
- <name>CCJLinkLogFile</name>
- <state>$TOOLKIT_DIR$\cspycomm.log</state>
- </option>
- <option>
- <name>CCJLinkHWResetDelay</name>
- <state>0</state>
- </option>
- <option>
- <name>OCDriverInfo</name>
- <state>1</state>
- </option>
- <option>
- <name>JLinkInitialSpeed</name>
- <state>32</state>
- </option>
- <option>
- <name>CCDoJlinkMultiTarget</name>
- <state>0</state>
- </option>
- <option>
- <name>CCScanChainNonARMDevices</name>
- <state>0</state>
- </option>
- <option>
- <name>CCJLinkMultiTarget</name>
- <state>0</state>
- </option>
- <option>
- <name>CCJLinkIRLength</name>
- <state>0</state>
- </option>
- <option>
- <name>CCJLinkCommRadio</name>
- <state>0</state>
- </option>
- <option>
- <name>CCJLinkTCPIP</name>
- <state>aaa.bbb.ccc.ddd</state>
- </option>
- <option>
- <name>CCJLinkSpeedRadioV2</name>
- <state>0</state>
- </option>
- <option>
- <name>CCUSBDevice</name>
- <version>0</version>
- <state>0</state>
- </option>
- <option>
- <name>CCRDICatchReset</name>
- <state>0</state>
- </option>
- <option>
- <name>CCRDICatchUndef</name>
- <state>0</state>
- </option>
- <option>
- <name>CCRDICatchSWI</name>
- <state>0</state>
- </option>
- <option>
- <name>CCRDICatchData</name>
- <state>0</state>
- </option>
- <option>
- <name>CCRDICatchPrefetch</name>
- <state>0</state>
- </option>
- <option>
- <name>CCRDICatchIRQ</name>
- <state>0</state>
- </option>
- <option>
- <name>CCRDICatchFIQ</name>
- <state>0</state>
- </option>
- <option>
- <name>CCJLinkBreakpointRadio</name>
- <state>0</state>
- </option>
- <option>
- <name>CCJLinkDoUpdateBreakpoints</name>
- <state>0</state>
- </option>
- <option>
- <name>CCJLinkUpdateBreakpoints</name>
- <state>main</state>
- </option>
- <option>
- <name>CCJLinkInterfaceRadio</name>
- <state>0</state>
- </option>
- <option>
- <name>OCJLinkAttachSlave</name>
- <state>1</state>
- </option>
- <option>
- <name>CCJLinkResetList</name>
- <version>0</version>
- <state>5</state>
- </option>
- </data>
- </settings>
- <settings>
- <name>LMIFTDI_ID</name>
- <archiveVersion>2</archiveVersion>
- <data>
- <version>1</version>
- <wantNonLocal>1</wantNonLocal>
- <debug>1</debug>
- <option>
- <name>OCDriverInfo</name>
- <state>1</state>
- </option>
- <option>
- <name>LmiftdiSpeed</name>
- <state>500</state>
- </option>
- <option>
- <name>CCLmiftdiDoLogfile</name>
- <state>0</state>
- </option>
- <option>
- <name>CCLmiftdiLogFile</name>
- <state>$TOOLKIT_DIR$\cspycomm.log</state>
- </option>
- </data>
- </settings>
- <settings>
- <name>MACRAIGOR_ID</name>
- <archiveVersion>2</archiveVersion>
- <data>
- <version>2</version>
- <wantNonLocal>1</wantNonLocal>
- <debug>1</debug>
- <option>
- <name>jtag</name>
- <version>0</version>
- <state>0</state>
- </option>
- <option>
- <name>EmuSpeed</name>
- <state>1</state>
- </option>
- <option>
- <name>TCPIP</name>
- <state>aaa.bbb.ccc.ddd</state>
- </option>
- <option>
- <name>DoLogfile</name>
- <state>0</state>
- </option>
- <option>
- <name>LogFile</name>
- <state>$TOOLKIT_DIR$\cspycomm.log</state>
- </option>
- <option>
- <name>DoEmuMultiTarget</name>
- <state>0</state>
- </option>
- <option>
- <name>EmuMultiTarget</name>
- <state>0@ARM7TDMI</state>
- </option>
- <option>
- <name>EmuHWReset</name>
- <state>0</state>
- </option>
- <option>
- <name>CEmuCommBaud</name>
- <version>0</version>
- <state>4</state>
- </option>
- <option>
- <name>CEmuCommPort</name>
- <version>0</version>
- <state>0</state>
- </option>
- <option>
- <name>jtago</name>
- <version>0</version>
- <state>0</state>
- </option>
- <option>
- <name>OCDriverInfo</name>
- <state>1</state>
- </option>
- <option>
- <name>UnusedAddr</name>
- <state>0x00800000</state>
- </option>
- <option>
- <name>CCMacraigorHWResetDelay</name>
- <state></state>
- </option>
- <option>
- <name>CCJTagBreakpointRadio</name>
- <state>0</state>
- </option>
- <option>
- <name>CCJTagDoUpdateBreakpoints</name>
- <state>0</state>
- </option>
- <option>
- <name>CCJTagUpdateBreakpoints</name>
- <state>main</state>
- </option>
- </data>
- </settings>
- <settings>
- <name>RDI_ID</name>
- <archiveVersion>2</archiveVersion>
- <data>
- <version>1</version>
- <wantNonLocal>1</wantNonLocal>
- <debug>1</debug>
- <option>
- <name>CRDIDriverDll</name>
- <state>Browse to your RDI driver</state>
- </option>
- <option>
- <name>CRDILogFileCheck</name>
- <state>0</state>
- </option>
- <option>
- <name>CRDILogFileEdit</name>
- <state>$TOOLKIT_DIR$\cspycomm.log</state>
- </option>
- <option>
- <name>CCRDIHWReset</name>
- <state>0</state>
- </option>
- <option>
- <name>CCRDICatchReset</name>
- <state>0</state>
- </option>
- <option>
- <name>CCRDICatchUndef</name>
- <state>0</state>
- </option>
- <option>
- <name>CCRDICatchSWI</name>
- <state>0</state>
- </option>
- <option>
- <name>CCRDICatchData</name>
- <state>0</state>
- </option>
- <option>
- <name>CCRDICatchPrefetch</name>
- <state>0</state>
- </option>
- <option>
- <name>CCRDICatchIRQ</name>
- <state>0</state>
- </option>
- <option>
- <name>CCRDICatchFIQ</name>
- <state>0</state>
- </option>
- <option>
- <name>CCRDIUseETM</name>
- <state>0</state>
- </option>
- <option>
- <name>OCDriverInfo</name>
- <state>1</state>
- </option>
- </data>
- </settings>
- <settings>
- <name>THIRDPARTY_ID</name>
- <archiveVersion>2</archiveVersion>
- <data>
- <version>0</version>
- <wantNonLocal>1</wantNonLocal>
- <debug>1</debug>
- <option>
- <name>CThirdPartyDriverDll</name>
- <state>Browse to your third-party driver</state>
- </option>
- <option>
- <name>CThirdPartyLogFileCheck</name>
- <state>0</state>
- </option>
- <option>
- <name>CThirdPartyLogFileEditB</name>
- <state>$TOOLKIT_DIR$\cspycomm.log</state>
- </option>
- <option>
- <name>OCDriverInfo</name>
- <state>1</state>
- </option>
- </data>
- </settings>
- <debuggerPlugins>
- <plugin>
- <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ewplugin</file>
- <loadFlag>0</loadFlag>
- </plugin>
- <plugin>
- <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ewplugin</file>
- <loadFlag>0</loadFlag>
- </plugin>
- <plugin>
- <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
- <loadFlag>0</loadFlag>
- </plugin>
- <plugin>
- <file>$TOOLKIT_DIR$\plugins\rtos\OSE\OseEpsilonPlugin.ewplugin</file>
- <loadFlag>0</loadFlag>
- </plugin>
- <plugin>
- <file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
- <loadFlag>0</loadFlag>
- </plugin>
- <plugin>
- <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ewplugin</file>
- <loadFlag>0</loadFlag>
- </plugin>
- <plugin>
- <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
- <loadFlag>0</loadFlag>
- </plugin>
- <plugin>
- <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
- <loadFlag>1</loadFlag>
- </plugin>
- <plugin>
- <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
- <loadFlag>0</loadFlag>
- </plugin>
- <plugin>
- <file>$EW_DIR$\common\plugins\Profiling\Profiling.ENU.ewplugin</file>
- <loadFlag>1</loadFlag>
- </plugin>
- <plugin>
- <file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file>
- <loadFlag>1</loadFlag>
- </plugin>
- </debuggerPlugins>
- </configuration>
-</project>
diff --git a/project0/project0.ewp b/project0/project0.ewp deleted file mode 100644 index f88099b..0000000 --- a/project0/project0.ewp +++ /dev/null @@ -1,786 +0,0 @@ -<?xml version="1.0" encoding="iso-8859-1"?>
-
-<project>
- <fileVersion>1</fileVersion>
- <configuration>
- <name>Debug</name>
- <toolchain>
- <name>ARM</name>
- </toolchain>
- <debug>1</debug>
- <settings>
- <name>General</name>
- <archiveVersion>3</archiveVersion>
- <data>
- <version>14</version>
- <wantNonLocal>1</wantNonLocal>
- <debug>1</debug>
- <option>
- <name>ExePath</name>
- <state>ewarm\Exe</state>
- </option>
- <option>
- <name>ObjPath</name>
- <state>ewarm\Obj</state>
- </option>
- <option>
- <name>ListPath</name>
- <state>ewarm\List</state>
- </option>
- <option>
- <name>Variant</name>
- <version>19</version>
- <state>39</state>
- </option>
- <option>
- <name>GEndianMode</name>
- <state>0</state>
- </option>
- <option>
- <name>Input variant</name>
- <version>1</version>
- <state>3</state>
- </option>
- <option>
- <name>Input description</name>
- <state>No specifier n, no float nor long long, no scan set, no assignment suppressing.</state>
- </option>
- <option>
- <name>Output variant</name>
- <version>0</version>
- <state>3</state>
- </option>
- <option>
- <name>Output description</name>
- <state>No specifier a, A, no specifier n, no float nor long long, no flags.</state>
- </option>
- <option>
- <name>GOutputBinary</name>
- <state>0</state>
- </option>
- <option>
- <name>FPU</name>
- <version>2</version>
- <state>5</state>
- </option>
- <option>
- <name>OGCoreOrChip</name>
- <state>1</state>
- </option>
- <option>
- <name>GRuntimeLibSelect</name>
- <version>0</version>
- <state>1</state>
- </option>
- <option>
- <name>GRuntimeLibSelectSlave</name>
- <version>0</version>
- <state>1</state>
- </option>
- <option>
- <name>RTDescription</name>
- <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
- </option>
- <option>
- <name>RTConfigPath</name>
- <state>$TOOLKIT_DIR$\INC\DLib_Config_Normal.h</state>
- </option>
- <option>
- <name>OGProductVersion</name>
- <state>5.11.0.50579</state>
- </option>
- <option>
- <name>OGLastSavedByProductVersion</name>
- <state>5.11.0.50579</state>
- </option>
- <option>
- <name>GeneralMisraRules</name>
- <version>0</version>
- <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
- </option>
- <option>
- <name>GeneralEnableMisra</name>
- <state>0</state>
- </option>
- <option>
- <name>GeneralMisraVerbose</name>
- <state>0</state>
- </option>
- <option>
- <name>OGChipSelectEditMenu</name>
- <state>LM4F120H5QR TexasInstruments LM4F120H5QR</state>
- </option>
- <option>
- <name>GenLowLevelInterface</name>
- <state>1</state>
- </option>
- <option>
- <name>GEndianModeBE</name>
- <state>1</state>
- </option>
- <option>
- <name>OGBufferedTerminalOutput</name>
- <state>0</state>
- </option>
- </data>
- </settings>
- <settings>
- <name>ICCARM</name>
- <archiveVersion>2</archiveVersion>
- <data>
- <version>19</version>
- <wantNonLocal>1</wantNonLocal>
- <debug>1</debug>
- <option>
- <name>CCDefines</name>
- <state>ewarm</state>
- <state>PART_LM4F120H5QR</state>
- <state>TARGET_IS_BLIZZARD_RA2</state>
- </option>
- <option>
- <name>CCPreprocFile</name>
- <state>0</state>
- </option>
- <option>
- <name>CCPreprocComments</name>
- <state>0</state>
- </option>
- <option>
- <name>CCPreprocLine</name>
- <state>0</state>
- </option>
- <option>
- <name>CCListCFile</name>
- <state>0</state>
- </option>
- <option>
- <name>CCListCMnemonics</name>
- <state>0</state>
- </option>
- <option>
- <name>CCListCMessages</name>
- <state>0</state>
- </option>
- <option>
- <name>CCListAssFile</name>
- <state>0</state>
- </option>
- <option>
- <name>CCListAssSource</name>
- <state>0</state>
- </option>
- <option>
- <name>CCEnableRemarks</name>
- <state>0</state>
- </option>
- <option>
- <name>CCDiagSuppress</name>
- <state>Pa050</state>
- </option>
- <option>
- <name>CCDiagRemark</name>
- <state></state>
- </option>
- <option>
- <name>CCDiagWarning</name>
- <state></state>
- </option>
- <option>
- <name>CCDiagError</name>
- <state></state>
- </option>
- <option>
- <name>CCObjPrefix</name>
- <state>1</state>
- </option>
- <option>
- <name>CCAllowList</name>
- <version>1</version>
- <state>1111111</state>
- </option>
- <option>
- <name>CCDebugInfo</name>
- <state>1</state>
- </option>
- <option>
- <name>IEndianMode</name>
- <state>1</state>
- </option>
- <option>
- <name>IProcessor</name>
- <state>1</state>
- </option>
- <option>
- <name>IExtraOptionsCheck</name>
- <state>0</state>
- </option>
- <option>
- <name>IExtraOptions</name>
- <state></state>
- </option>
- <option>
- <name>CCLangConformance</name>
- <state>0</state>
- </option>
- <option>
- <name>CCSignedPlainChar</name>
- <state>1</state>
- </option>
- <option>
- <name>CCRequirePrototypes</name>
- <state>0</state>
- </option>
- <option>
- <name>CCMultibyteSupport</name>
- <state>0</state>
- </option>
- <option>
- <name>CCDiagWarnAreErr</name>
- <state>0</state>
- </option>
- <option>
- <name>CCCompilerRuntimeInfo</name>
- <state>0</state>
- </option>
- <option>
- <name>IFpuProcessor</name>
- <state>1</state>
- </option>
- <option>
- <name>OutputFile</name>
- <state>$FILE_BNAME$.o</state>
- </option>
- <option>
- <name>CCLangSelect</name>
- <state>0</state>
- </option>
- <option>
- <name>CCLibConfigHeader</name>
- <state>1</state>
- </option>
- <option>
- <name>PreInclude</name>
- <state></state>
- </option>
- <option>
- <name>CompilerMisraRules</name>
- <version>0</version>
- <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
- </option>
- <option>
- <name>CompilerMisraOverride</name>
- <state>0</state>
- </option>
- <option>
- <name>CCIncludePath2</name>
- <state>$PROJ_DIR$\..</state>
- <state>$PROJ_DIR$\..\..\..</state>
- </option>
- <option>
- <name>CCStdIncCheck</name>
- <state>0</state>
- </option>
- <option>
- <name>CCStdIncludePath</name>
- <state>$TOOLKIT_DIR$\INC\</state>
- </option>
- <option>
- <name>CCCodeSection</name>
- <state>.text</state>
- </option>
- <option>
- <name>IInterwork2</name>
- <state>0</state>
- </option>
- <option>
- <name>IProcessorMode2</name>
- <state>1</state>
- </option>
- <option>
- <name>CCOptLevel</name>
- <state>3</state>
- </option>
- <option>
- <name>CCOptStrategy</name>
- <version>0</version>
- <state>1</state>
- </option>
- <option>
- <name>CCOptLevelSlave</name>
- <state>3</state>
- </option>
- </data>
- </settings>
- <settings>
- <name>AARM</name>
- <archiveVersion>2</archiveVersion>
- <data>
- <version>7</version>
- <wantNonLocal>1</wantNonLocal>
- <debug>1</debug>
- <option>
- <name>AObjPrefix</name>
- <state>1</state>
- </option>
- <option>
- <name>AEndian</name>
- <state>1</state>
- </option>
- <option>
- <name>ACaseSensitivity</name>
- <state>1</state>
- </option>
- <option>
- <name>MacroChars</name>
- <version>0</version>
- <state>0</state>
- </option>
- <option>
- <name>AWarnEnable</name>
- <state>0</state>
- </option>
- <option>
- <name>AWarnWhat</name>
- <state>0</state>
- </option>
- <option>
- <name>AWarnOne</name>
- <state></state>
- </option>
- <option>
- <name>AWarnRange1</name>
- <state></state>
- </option>
- <option>
- <name>AWarnRange2</name>
- <state></state>
- </option>
- <option>
- <name>ADebug</name>
- <state>1</state>
- </option>
- <option>
- <name>AltRegisterNames</name>
- <state>0</state>
- </option>
- <option>
- <name>ADefines</name>
- <state>ewarm</state>
- </option>
- <option>
- <name>AList</name>
- <state>0</state>
- </option>
- <option>
- <name>AListHeader</name>
- <state>1</state>
- </option>
- <option>
- <name>AListing</name>
- <state>1</state>
- </option>
- <option>
- <name>Includes</name>
- <state>0</state>
- </option>
- <option>
- <name>MacDefs</name>
- <state>0</state>
- </option>
- <option>
- <name>MacExps</name>
- <state>1</state>
- </option>
- <option>
- <name>MacExec</name>
- <state>0</state>
- </option>
- <option>
- <name>OnlyAssed</name>
- <state>0</state>
- </option>
- <option>
- <name>MultiLine</name>
- <state>0</state>
- </option>
- <option>
- <name>PageLengthCheck</name>
- <state>0</state>
- </option>
- <option>
- <name>PageLength</name>
- <state>80</state>
- </option>
- <option>
- <name>TabSpacing</name>
- <state>8</state>
- </option>
- <option>
- <name>AXRef</name>
- <state>0</state>
- </option>
- <option>
- <name>AXRefDefines</name>
- <state>0</state>
- </option>
- <option>
- <name>AXRefInternal</name>
- <state>0</state>
- </option>
- <option>
- <name>AXRefDual</name>
- <state>0</state>
- </option>
- <option>
- <name>AProcessor</name>
- <state>1</state>
- </option>
- <option>
- <name>AFpuProcessor</name>
- <state>1</state>
- </option>
- <option>
- <name>AOutputFile</name>
- <state>$FILE_BNAME$.o</state>
- </option>
- <option>
- <name>AMultibyteSupport</name>
- <state>0</state>
- </option>
- <option>
- <name>ALimitErrorsCheck</name>
- <state>0</state>
- </option>
- <option>
- <name>ALimitErrorsEdit</name>
- <state>100</state>
- </option>
- <option>
- <name>AIgnoreStdInclude</name>
- <state>0</state>
- </option>
- <option>
- <name>AStdIncludes</name>
- <state>$TOOLKIT_DIR$\INC\</state>
- </option>
- <option>
- <name>AUserIncludes</name>
- <state>$PROJ_DIR$\..</state>
- <state>$PROJ_DIR$\..\..\..</state>
- </option>
- <option>
- <name>AExtraOptionsCheckV2</name>
- <state>0</state>
- </option>
- <option>
- <name>AExtraOptionsV2</name>
- <state></state>
- </option>
- </data>
- </settings>
- <settings>
- <name>OBJCOPY</name>
- <archiveVersion>0</archiveVersion>
- <data>
- <version>1</version>
- <wantNonLocal>1</wantNonLocal>
- <debug>1</debug>
- <option>
- <name>OOCOutputFormat</name>
- <version>1</version>
- <state>2</state>
- </option>
- <option>
- <name>OCOutputOverride</name>
- <state>0</state>
- </option>
- <option>
- <name>OOCOutputFile</name>
- <state>project0.bin</state>
- </option>
- <option>
- <name>OOCCommandLineProducer</name>
- <state>1</state>
- </option>
- <option>
- <name>OOCObjCopyEnable</name>
- <state>1</state>
- </option>
- </data>
- </settings>
- <settings>
- <name>CUSTOM</name>
- <archiveVersion>3</archiveVersion>
- <data>
- <extensions></extensions>
- <cmdline></cmdline>
- </data>
- </settings>
- <settings>
- <name>BICOMP</name>
- <archiveVersion>0</archiveVersion>
- <data/>
- </settings>
- <settings>
- <name>BUILDACTION</name>
- <archiveVersion>1</archiveVersion>
- <data>
- <prebuild></prebuild>
- <postbuild></postbuild>
- </data>
- </settings>
- <settings>
- <name>ILINK</name>
- <archiveVersion>0</archiveVersion>
- <data>
- <version>5</version>
- <wantNonLocal>1</wantNonLocal>
- <debug>1</debug>
- <option>
- <name>IlinkLibIOConfig</name>
- <state>1</state>
- </option>
- <option>
- <name>XLinkMisraHandler</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkInputFileSlave</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkOutputFile</name>
- <state>project0.out</state>
- </option>
- <option>
- <name>IlinkDebugInfoEnable</name>
- <state>1</state>
- </option>
- <option>
- <name>IlinkKeepSymbols</name>
- <state></state>
- </option>
- <option>
- <name>IlinkRawBinaryFile</name>
- <state></state>
- </option>
- <option>
- <name>IlinkRawBinarySymbol</name>
- <state></state>
- </option>
- <option>
- <name>IlinkRawBinarySegment</name>
- <state></state>
- </option>
- <option>
- <name>IlinkRawBinaryAlign</name>
- <state></state>
- </option>
- <option>
- <name>IlinkDefines</name>
- <state></state>
- </option>
- <option>
- <name>IlinkConfigDefines</name>
- <state></state>
- </option>
- <option>
- <name>IlinkMapFile</name>
- <state>1</state>
- </option>
- <option>
- <name>IlinkLogFile</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkLogInitialization</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkLogModule</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkLogSection</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkLogVeneer</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkIcfOverride</name>
- <state>1</state>
- </option>
- <option>
- <name>IlinkIcfFile</name>
- <state>$PROJ_DIR$\project0.icf</state>
- </option>
- <option>
- <name>IlinkIcfFileSlave</name>
- <state></state>
- </option>
- <option>
- <name>IlinkEnableRemarks</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkSuppressDiags</name>
- <state></state>
- </option>
- <option>
- <name>IlinkTreatAsRem</name>
- <state></state>
- </option>
- <option>
- <name>IlinkTreatAsWarn</name>
- <state></state>
- </option>
- <option>
- <name>IlinkTreatAsErr</name>
- <state></state>
- </option>
- <option>
- <name>IlinkWarningsAreErrors</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkUseExtraOptions</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkExtraOptions</name>
- <state></state>
- </option>
- <option>
- <name>IlinkLowLevelInterfaceSlave</name>
- <state>1</state>
- </option>
- <option>
- <name>IlinkAutoLibEnable</name>
- <state>1</state>
- </option>
- <option>
- <name>IlinkAdditionalLibs</name>
- <state></state>
- </option>
- <option>
- <name>IlinkOverrideProgramEntryLabel</name>
- <state>1</state>
- </option>
- <option>
- <name>IlinkProgramEntryLabelSelect</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkProgramEntryLabel</name>
- <state>__iar_program_start</state>
- </option>
- <option>
- <name>IlinkNXPLPCChecksum</name>
- <state>0</state>
- </option>
- <option>
- <name>DoFill</name>
- <state>0</state>
- </option>
- <option>
- <name>FillerByte</name>
- <state>0xFF</state>
- </option>
- <option>
- <name>FillerStart</name>
- <state>0x0</state>
- </option>
- <option>
- <name>FillerEnd</name>
- <state>0x0</state>
- </option>
- <option>
- <name>CrcSize</name>
- <version>0</version>
- <state>1</state>
- </option>
- <option>
- <name>CrcAlign</name>
- <state>1</state>
- </option>
- <option>
- <name>CrcAlgo</name>
- <state>1</state>
- </option>
- <option>
- <name>CrcPoly</name>
- <state>0x11021</state>
- </option>
- <option>
- <name>CrcCompl</name>
- <version>0</version>
- <state>0</state>
- </option>
- <option>
- <name>CrcBitOrder</name>
- <version>0</version>
- <state>0</state>
- </option>
- <option>
- <name>CrcInitialValue</name>
- <state>0x0</state>
- </option>
- <option>
- <name>DoCrc</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkBE8Slave</name>
- <state>1</state>
- </option>
- <option>
- <name>IlinkBufferedTerminalOutput</name>
- <state>1</state>
- </option>
- </data>
- </settings>
- <settings>
- <name>IARCHIVE</name>
- <archiveVersion>0</archiveVersion>
- <data>
- <version>0</version>
- <wantNonLocal>1</wantNonLocal>
- <debug>1</debug>
- <option>
- <name>IarchiveInputs</name>
- <state></state>
- </option>
- <option>
- <name>IarchiveOverride</name>
- <state>0</state>
- </option>
- <option>
- <name>IarchiveOutput</name>
- <state>###Unitialized###</state>
- </option>
- </data>
- </settings>
- <settings>
- <name>BILINK</name>
- <archiveVersion>0</archiveVersion>
- <data/>
- </settings>
- </configuration>
- <group>
- <name>Libraries</name>
- <file>
- <name>$PROJ_DIR$\..\..\..\driverlib\ewarm-cm4f\Exe\driverlib-cm4f.a</name>
- </file>
- </group>
- <group>
- <name>Source</name>
- <file>
- <name>$PROJ_DIR$\project0.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\startup_ewarm.c</name>
- </file>
- </group>
-</project>
diff --git a/project0/project0.icf b/project0/project0.icf deleted file mode 100644 index 980a972..0000000 --- a/project0/project0.icf +++ /dev/null @@ -1,78 +0,0 @@ -//*****************************************************************************
-//
-// project0.icf - Linker configuration file for project0.
-//
-// Copyright (c) 2012 Texas Instruments Incorporated. All rights reserved.
-// Software License Agreement
-//
-// Texas Instruments (TI) is supplying this software for use solely and
-// exclusively on TI's microcontroller products. The software is owned by
-// TI and/or its suppliers, and is protected under applicable copyright
-// laws. You may not combine this software with "viral" open-source
-// software in order to form a larger program.
-//
-// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
-// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
-// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
-// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
-// DAMAGES, FOR ANY REASON WHATSOEVER.
-//
-// This is part of revision 9453 of the EK-LM4F120XL Firmware Package.
-//
-//*****************************************************************************
-
-//
-// Define a memory region that covers the entire 4 GB addressible space of the
-// processor.
-//
-define memory mem with size = 4G;
-
-//
-// Define a region for the on-chip flash.
-//
-define region FLASH = mem:[from 0x00000000 to 0x0003ffff];
-
-//
-// Define a region for the on-chip SRAM.
-//
-define region SRAM = mem:[from 0x20000000 to 0x20007fff];
-
-//
-// Define a block for the heap. The size should be set to something other
-// than zero if things in the C library that require the heap are used.
-//
-define block HEAP with alignment = 8, size = 0x00000000 { };
-
-//
-// Indicate that the read/write values should be initialized by copying from
-// flash.
-//
-initialize by copy { readwrite };
-
-//
-// Indicate that the noinit values should be left alone. This includes the
-// stack, which if initialized will destroy the return address from the
-// initialization code, causing the processor to branch to zero and fault.
-//
-do not initialize { section .noinit };
-
-//
-// Place the interrupt vectors at the start of flash.
-//
-place at start of FLASH { readonly section .intvec };
-
-//
-// Place the remainder of the read-only items into flash.
-//
-place in FLASH { readonly };
-
-//
-// Place the RAM vector table at the start of SRAM.
-//
-place at start of SRAM { section VTABLE };
-
-//
-// Place all read/write items into SRAM.
-//
-place in SRAM { readwrite, block HEAP };
diff --git a/project0/project0.ld b/project0/project0.ld deleted file mode 100644 index 1e3b975..0000000 --- a/project0/project0.ld +++ /dev/null @@ -1,57 +0,0 @@ -/******************************************************************************
- *
- * project0.ld - Linker configuration file for project0.
- *
- * Copyright (c) 2012 Texas Instruments Incorporated. All rights reserved.
- * Software License Agreement
- *
- * Texas Instruments (TI) is supplying this software for use solely and
- * exclusively on TI's microcontroller products. The software is owned by
- * TI and/or its suppliers, and is protected under applicable copyright
- * laws. You may not combine this software with "viral" open-source
- * software in order to form a larger program.
- *
- * THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
- * NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
- * NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
- * CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
- * DAMAGES, FOR ANY REASON WHATSOEVER.
- *
- * This is part of revision 9453 of the EK-LM4F120XL Firmware Package.
- *
- *****************************************************************************/
-
-MEMORY
-{
- FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x00040000
- SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000
-}
-
-SECTIONS
-{
- .text :
- {
- _text = .;
- KEEP(*(.isr_vector))
- *(.text*)
- *(.rodata*)
- _etext = .;
- } > FLASH
-
- .data : AT(ADDR(.text) + SIZEOF(.text))
- {
- _data = .;
- *(vtable)
- *(.data*)
- _edata = .;
- } > SRAM
-
- .bss :
- {
- _bss = .;
- *(.bss*)
- *(COMMON)
- _ebss = .;
- } > SRAM
-}
diff --git a/project0/project0.sct b/project0/project0.sct deleted file mode 100644 index a4da7fd..0000000 --- a/project0/project0.sct +++ /dev/null @@ -1,47 +0,0 @@ -;******************************************************************************
-;
-; project0.sct - Linker configuration file for project0.
-;
-; Copyright (c) 2012 Texas Instruments Incorporated. All rights reserved.
-; Software License Agreement
-;
-; Texas Instruments (TI) is supplying this software for use solely and
-; exclusively on TI's microcontroller products. The software is owned by
-; TI and/or its suppliers, and is protected under applicable copyright
-; laws. You may not combine this software with "viral" open-source
-; software in order to form a larger program.
-;
-; THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
-; NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
-; NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-; A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
-; CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
-; DAMAGES, FOR ANY REASON WHATSOEVER.
-;
-; This is part of revision 9453 of the EK-LM4F120XL Firmware Package.
-;
-;******************************************************************************
-
-LR_IROM 0x00000000 0x00040000
-{
- ;
- ; Specify the Execution Address of the code and the size.
- ;
- ER_IROM 0x00000000 0x00040000
- {
- *.o (RESET, +First)
- * (InRoot$$Sections, +RO)
- }
-
- ;
- ; Specify the Execution Address of the data area.
- ;
- RW_IRAM 0x20000000 0x00008000
- {
- ;
- ; Uncomment the following line in order to use IntRegister().
- ;
- ;* (vtable, +First)
- * (+RW, +ZI)
- }
-}
diff --git a/project0/project0.sgxx b/project0/project0.sgxx Binary files differdeleted file mode 100644 index 541e44e..0000000 --- a/project0/project0.sgxx +++ /dev/null diff --git a/project0/project0.uvopt b/project0/project0.uvopt deleted file mode 100644 index f86df0f..0000000 --- a/project0/project0.uvopt +++ /dev/null @@ -1,289 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
-<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
-
- <SchemaVersion>1.0</SchemaVersion>
-
- <Header>### uVision Project, (C) Keil Software</Header>
-
- <Extensions>
- <cExt>*.c</cExt>
- <aExt>*.s*; *.src; *.a*</aExt>
- <oExt>*.obj</oExt>
- <lExt>*.lib</lExt>
- <tExt>*.txt; *.h; *.inc</tExt>
- <pExt>*.plm</pExt>
- <CppX>*.cpp</CppX>
- </Extensions>
-
- <DaveTm>
- <dwLowDateTime>0</dwLowDateTime>
- <dwHighDateTime>0</dwHighDateTime>
- </DaveTm>
-
- <Target>
- <TargetName>project0</TargetName>
- <ToolsetNumber>0x4</ToolsetNumber>
- <ToolsetName>ARM-ADS</ToolsetName>
- <TargetOption>
- <CLKADS>8000000</CLKADS>
- <OPTTT>
- <gFlags>1</gFlags>
- <BeepAtEnd>1</BeepAtEnd>
- <RunSim>1</RunSim>
- <RunTarget>0</RunTarget>
- </OPTTT>
- <OPTHX>
- <HexSelection>1</HexSelection>
- <FlashByte>65535</FlashByte>
- <HexRangeLowAddress>0</HexRangeLowAddress>
- <HexRangeHighAddress>0</HexRangeHighAddress>
- <HexOffset>0</HexOffset>
- </OPTHX>
- <OPTLEX>
- <PageWidth>79</PageWidth>
- <PageLength>66</PageLength>
- <TabStop>8</TabStop>
- <ListingPath>.\rvmdk\</ListingPath>
- </OPTLEX>
- <ListingPage>
- <CreateCListing>1</CreateCListing>
- <CreateAListing>1</CreateAListing>
- <CreateLListing>1</CreateLListing>
- <CreateIListing>0</CreateIListing>
- <AsmCond>1</AsmCond>
- <AsmSymb>1</AsmSymb>
- <AsmXref>0</AsmXref>
- <CCond>1</CCond>
- <CCode>0</CCode>
- <CListInc>0</CListInc>
- <CSymb>0</CSymb>
- <LinkerCodeListing>0</LinkerCodeListing>
- </ListingPage>
- <OPTXL>
- <LMap>1</LMap>
- <LComments>1</LComments>
- <LGenerateSymbols>1</LGenerateSymbols>
- <LLibSym>1</LLibSym>
- <LLines>1</LLines>
- <LLocSym>1</LLocSym>
- <LPubSym>1</LPubSym>
- <LXref>0</LXref>
- <LExpSel>0</LExpSel>
- </OPTXL>
- <OPTFL>
- <tvExp>1</tvExp>
- <tvExpOptDlg>0</tvExpOptDlg>
- <IsCurrentTarget>1</IsCurrentTarget>
- </OPTFL>
- <CpuCode>255</CpuCode>
- <Books>
- <Book>
- <Number>0</Number>
- <Title>Data Sheet</Title>
- <Path>DATASHTS\Luminary\LM4F120H5QR.PDF</Path>
- </Book>
- </Books>
- <DllOpt>
- <SimDllName>SARMCM3.DLL</SimDllName>
- <SimDllArguments>-MPU</SimDllArguments>
- <SimDlgDllName>DCM.DLL</SimDlgDllName>
- <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
- <TargetDllName>SARMCM3.DLL</TargetDllName>
- <TargetDllArguments>-MPU</TargetDllArguments>
- <TargetDlgDllName>TCM.DLL</TargetDlgDllName>
- <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
- </DllOpt>
- <DebugOpt>
- <uSim>0</uSim>
- <uTrg>1</uTrg>
- <sLdApp>1</sLdApp>
- <sGomain>1</sGomain>
- <sRbreak>1</sRbreak>
- <sRwatch>1</sRwatch>
- <sRmem>1</sRmem>
- <sRfunc>1</sRfunc>
- <sRbox>1</sRbox>
- <tLdApp>1</tLdApp>
- <tGomain>0</tGomain>
- <tRbreak>1</tRbreak>
- <tRwatch>1</tRwatch>
- <tRmem>1</tRmem>
- <tRfunc>0</tRfunc>
- <tRbox>1</tRbox>
- <sRunDeb>0</sRunDeb>
- <sLrtime>0</sLrtime>
- <nTsel>4</nTsel>
- <sDll></sDll>
- <sDllPa></sDllPa>
- <sDlgDll></sDlgDll>
- <sDlgPa></sDlgPa>
- <sIfile></sIfile>
- <tDll></tDll>
- <tDllPa></tDllPa>
- <tDlgDll></tDlgDll>
- <tDlgPa></tDlgPa>
- <tIfile></tIfile>
- <pMon>BIN\lmidk-agdi.dll</pMon>
- </DebugOpt>
- <TargetDriverDllRegistry>
- <SetRegEntry>
- <Number>0</Number>
- <Key>lmidk-agdi</Key>
- <Name>-O4614 -S3 -FO29</Name>
- </SetRegEntry>
- <SetRegEntry>
- <Number>0</Number>
- <Key>DLGTARM</Key>
- <Name></Name>
- </SetRegEntry>
- <SetRegEntry>
- <Number>0</Number>
- <Key>ARMDBGFLAGS</Key>
- <Name></Name>
- </SetRegEntry>
- </TargetDriverDllRegistry>
- <DebugFlag>
- <trace>0</trace>
- <periodic>1</periodic>
- <aLwin>0</aLwin>
- <aCover>0</aCover>
- <aSer1>0</aSer1>
- <aSer2>0</aSer2>
- <aPa>0</aPa>
- <viewmode>1</viewmode>
- <vrSel>0</vrSel>
- <aSym>0</aSym>
- <aTbox>0</aTbox>
- <AscS1>0</AscS1>
- <AscS2>0</AscS2>
- <AscS3>0</AscS3>
- <aSer3>0</aSer3>
- <eProf>0</eProf>
- <aLa>0</aLa>
- <aPa1>0</aPa1>
- <AscS4>0</AscS4>
- <aSer4>0</aSer4>
- <StkLoc>0</StkLoc>
- <TrcWin>0</TrcWin>
- <newCpu>0</newCpu>
- <uProt>0</uProt>
- </DebugFlag>
- <LintExecutable></LintExecutable>
- <LintConfigFile></LintConfigFile>
- </TargetOption>
- </Target>
-
- <Group>
- <GroupName>Source</GroupName>
- <tvExp>1</tvExp>
- <tvExpOptDlg>0</tvExpOptDlg>
- <cbSel>0</cbSel>
- <File>
- <GroupNumber>1</GroupNumber>
- <FileNumber>1</FileNumber>
- <FileType>1</FileType>
- <tvExp>0</tvExp>
- <Focus>0</Focus>
- <ColumnNumber>0</ColumnNumber>
- <tvExpOptDlg>0</tvExpOptDlg>
- <TopLine>0</TopLine>
- <CurrentLine>0</CurrentLine>
- <bDave2>0</bDave2>
- <PathWithFileName>.\project0.c</PathWithFileName>
- <FilenameWithoutPath>project0.c</FilenameWithoutPath>
- </File>
- <File>
- <GroupNumber>1</GroupNumber>
- <FileNumber>2</FileNumber>
- <FileType>2</FileType>
- <tvExp>0</tvExp>
- <Focus>0</Focus>
- <ColumnNumber>0</ColumnNumber>
- <tvExpOptDlg>0</tvExpOptDlg>
- <TopLine>0</TopLine>
- <CurrentLine>0</CurrentLine>
- <bDave2>0</bDave2>
- <PathWithFileName>.\startup_rvmdk.S</PathWithFileName>
- <FilenameWithoutPath>startup_rvmdk.S</FilenameWithoutPath>
- </File>
- </Group>
-
- <Group>
- <GroupName>Libraries</GroupName>
- <tvExp>1</tvExp>
- <tvExpOptDlg>0</tvExpOptDlg>
- <cbSel>0</cbSel>
- <File>
- <GroupNumber>2</GroupNumber>
- <FileNumber>3</FileNumber>
- <FileType>4</FileType>
- <tvExp>0</tvExp>
- <Focus>0</Focus>
- <ColumnNumber>0</ColumnNumber>
- <tvExpOptDlg>0</tvExpOptDlg>
- <TopLine>0</TopLine>
- <CurrentLine>0</CurrentLine>
- <bDave2>0</bDave2>
- <PathWithFileName>..\..\..\driverlib\rvmdk-cm4f\driverlib-cm4f.lib</PathWithFileName>
- <FilenameWithoutPath>driverlib-cm4f.lib</FilenameWithoutPath>
- </File>
- </Group>
-
- <Group>
- <GroupName>Documentation</GroupName>
- <tvExp>1</tvExp>
- <tvExpOptDlg>0</tvExpOptDlg>
- <cbSel>0</cbSel>
- <File>
- <GroupNumber>3</GroupNumber>
- <FileNumber>4</FileNumber>
- <FileType>5</FileType>
- <tvExp>0</tvExp>
- <Focus>1</Focus>
- <ColumnNumber>0</ColumnNumber>
- <tvExpOptDlg>0</tvExpOptDlg>
- <TopLine>1</TopLine>
- <CurrentLine>1</CurrentLine>
- <bDave2>0</bDave2>
- <PathWithFileName>.\readme.txt</PathWithFileName>
- <FilenameWithoutPath>readme.txt</FilenameWithoutPath>
- <WindowPosition>
- <length>44</length>
- <flags>0</flags>
- <showCmd>1</showCmd>
- <MinPosition>
- <xPos>-1</xPos>
- <yPos>-1</yPos>
- </MinPosition>
- <MaxPosition>
- <xPos>-1</xPos>
- <yPos>-1</yPos>
- </MaxPosition>
- <NormalPosition>
- <Top>0</Top>
- <Left>0</Left>
- <Right>729</Right>
- <Bottom>300</Bottom>
- </NormalPosition>
- </WindowPosition>
- </File>
- </Group>
-
- <MDIGroups>
- <Orientation>1</Orientation>
- <ActiveMDIGroup>0</ActiveMDIGroup>
- <MDIGroup>
- <Size>100</Size>
- <ActiveTab>0</ActiveTab>
- <Documents>
- <Doc>
- <Name>.\readme.txt</Name>
- <ColumnNumber>0</ColumnNumber>
- <TopLine>1</TopLine>
- <CurrentLine>1</CurrentLine>
- </Doc>
- </Documents>
- </MDIGroup>
- </MDIGroups>
-
-</ProjectOpt>
diff --git a/project0/project0.uvproj b/project0/project0.uvproj deleted file mode 100644 index 31c0d5b..0000000 --- a/project0/project0.uvproj +++ /dev/null @@ -1,424 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
-<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
-
- <SchemaVersion>1.1</SchemaVersion>
-
- <Header>### uVision Project, (C) Keil Software</Header>
-
- <Targets>
- <Target>
- <TargetName>project0</TargetName>
- <ToolsetNumber>0x4</ToolsetNumber>
- <ToolsetName>ARM-ADS</ToolsetName>
- <TargetOption>
- <TargetCommonOption>
- <Device>LM4F120H5QR</Device>
- <Vendor>Texas Instruments</Vendor>
- <Cpu>IRAM(0x20000000-0x20007FFF) IROM(0-0x3FFFF) CLOCK(8000000) CPUTYPE("Cortex-M4") FPU2</Cpu>
- <FlashUtilSpec></FlashUtilSpec>
- <StartupFile>"STARTUP\Luminary\Startup.s" ("Luminary Startup Code")</StartupFile>
- <FlashDriverDll>UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0LM4F_256 -FS00 -FL040000)</FlashDriverDll>
- <DeviceId>5919</DeviceId>
- <RegisterFile>LM4Fxxxx.H</RegisterFile>
- <MemoryEnv></MemoryEnv>
- <Cmp></Cmp>
- <Asm></Asm>
- <Linker></Linker>
- <OHString></OHString>
- <InfinionOptionDll></InfinionOptionDll>
- <SLE66CMisc></SLE66CMisc>
- <SLE66AMisc></SLE66AMisc>
- <SLE66LinkerMisc></SLE66LinkerMisc>
- <UseEnv>0</UseEnv>
- <BinPath></BinPath>
- <IncludePath></IncludePath>
- <LibPath></LibPath>
- <RegisterFilePath>Luminary\</RegisterFilePath>
- <DBRegisterFilePath>Luminary\</DBRegisterFilePath>
- <TargetStatus>
- <Error>0</Error>
- <ExitCodeStop>0</ExitCodeStop>
- <ButtonStop>0</ButtonStop>
- <NotGenerated>0</NotGenerated>
- <InvalidFlash>1</InvalidFlash>
- </TargetStatus>
- <OutputDirectory>.\rvmdk\</OutputDirectory>
- <OutputName>project0</OutputName>
- <CreateExecutable>1</CreateExecutable>
- <CreateLib>0</CreateLib>
- <CreateHexFile>0</CreateHexFile>
- <DebugInformation>1</DebugInformation>
- <BrowseInformation>1</BrowseInformation>
- <ListingPath>.\rvmdk\</ListingPath>
- <HexFormatSelection>1</HexFormatSelection>
- <Merge32K>0</Merge32K>
- <CreateBatchFile>0</CreateBatchFile>
- <BeforeCompile>
- <RunUserProg1>0</RunUserProg1>
- <RunUserProg2>0</RunUserProg2>
- <UserProg1Name></UserProg1Name>
- <UserProg2Name></UserProg2Name>
- <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
- <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
- </BeforeCompile>
- <BeforeMake>
- <RunUserProg1>0</RunUserProg1>
- <RunUserProg2>0</RunUserProg2>
- <UserProg1Name></UserProg1Name>
- <UserProg2Name></UserProg2Name>
- <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
- <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
- </BeforeMake>
- <AfterMake>
- <RunUserProg1>1</RunUserProg1>
- <RunUserProg2>0</RunUserProg2>
- <UserProg1Name>fromelf --bin --output .\rvmdk\project0.bin .\rvmdk\project0.axf</UserProg1Name>
- <UserProg2Name></UserProg2Name>
- <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
- <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
- </AfterMake>
- <SelectedForBatchBuild>0</SelectedForBatchBuild>
- <SVCSIdString></SVCSIdString>
- </TargetCommonOption>
- <CommonProperty>
- <UseCPPCompiler>0</UseCPPCompiler>
- <RVCTCodeConst>0</RVCTCodeConst>
- <RVCTZI>0</RVCTZI>
- <RVCTOtherData>0</RVCTOtherData>
- <ModuleSelection>0</ModuleSelection>
- <IncludeInBuild>1</IncludeInBuild>
- <AlwaysBuild>0</AlwaysBuild>
- <GenerateAssemblyFile>0</GenerateAssemblyFile>
- <AssembleAssemblyFile>0</AssembleAssemblyFile>
- <PublicsOnly>0</PublicsOnly>
- <StopOnExitCode>3</StopOnExitCode>
- <CustomArgument></CustomArgument>
- <IncludeLibraryModules></IncludeLibraryModules>
- </CommonProperty>
- <DllOption>
- <SimDllName>SARMCM3.DLL</SimDllName>
- <SimDllArguments>-MPU</SimDllArguments>
- <SimDlgDll>DCM.DLL</SimDlgDll>
- <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
- <TargetDllName>SARMCM3.DLL</TargetDllName>
- <TargetDllArguments>-MPU</TargetDllArguments>
- <TargetDlgDll>TCM.DLL</TargetDlgDll>
- <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
- </DllOption>
- <DebugOption>
- <OPTHX>
- <HexSelection>1</HexSelection>
- <HexRangeLowAddress>0</HexRangeLowAddress>
- <HexRangeHighAddress>0</HexRangeHighAddress>
- <HexOffset>0</HexOffset>
- <Oh166RecLen>16</Oh166RecLen>
- </OPTHX>
- <Simulator>
- <UseSimulator>0</UseSimulator>
- <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
- <RunToMain>1</RunToMain>
- <RestoreBreakpoints>1</RestoreBreakpoints>
- <RestoreWatchpoints>1</RestoreWatchpoints>
- <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
- <RestoreFunctions>1</RestoreFunctions>
- <RestoreToolbox>1</RestoreToolbox>
- <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
- </Simulator>
- <Target>
- <UseTarget>1</UseTarget>
- <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
- <RunToMain>0</RunToMain>
- <RestoreBreakpoints>1</RestoreBreakpoints>
- <RestoreWatchpoints>1</RestoreWatchpoints>
- <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
- <RestoreFunctions>0</RestoreFunctions>
- <RestoreToolbox>1</RestoreToolbox>
- </Target>
- <RunDebugAfterBuild>0</RunDebugAfterBuild>
- <TargetSelection>4</TargetSelection>
- <SimDlls>
- <CpuDll></CpuDll>
- <CpuDllArguments></CpuDllArguments>
- <PeripheralDll></PeripheralDll>
- <PeripheralDllArguments></PeripheralDllArguments>
- <InitializationFile></InitializationFile>
- </SimDlls>
- <TargetDlls>
- <CpuDll></CpuDll>
- <CpuDllArguments></CpuDllArguments>
- <PeripheralDll></PeripheralDll>
- <PeripheralDllArguments></PeripheralDllArguments>
- <InitializationFile></InitializationFile>
- <Driver>BIN\lmidk-agdi.dll</Driver>
- </TargetDlls>
- </DebugOption>
- <Utilities>
- <Flash1>
- <UseTargetDll>1</UseTargetDll>
- <UseExternalTool>0</UseExternalTool>
- <RunIndependent>0</RunIndependent>
- <UpdateFlashBeforeDebugging>0</UpdateFlashBeforeDebugging>
- <Capability>1</Capability>
- <DriverSelection>4099</DriverSelection>
- </Flash1>
- <Flash2>BIN\lmidk-agdi.dll</Flash2>
- <Flash3></Flash3>
- <Flash4></Flash4>
- </Utilities>
- <TargetArmAds>
- <ArmAdsMisc>
- <GenerateListings>0</GenerateListings>
- <asHll>1</asHll>
- <asAsm>1</asAsm>
- <asMacX>1</asMacX>
- <asSyms>1</asSyms>
- <asFals>1</asFals>
- <asDbgD>1</asDbgD>
- <asForm>1</asForm>
- <ldLst>0</ldLst>
- <ldmm>1</ldmm>
- <ldXref>1</ldXref>
- <BigEnd>0</BigEnd>
- <AdsALst>0</AdsALst>
- <AdsACrf>0</AdsACrf>
- <AdsANop>0</AdsANop>
- <AdsANot>0</AdsANot>
- <AdsLLst>1</AdsLLst>
- <AdsLmap>1</AdsLmap>
- <AdsLcgr>1</AdsLcgr>
- <AdsLsym>1</AdsLsym>
- <AdsLszi>1</AdsLszi>
- <AdsLtoi>1</AdsLtoi>
- <AdsLsun>1</AdsLsun>
- <AdsLven>1</AdsLven>
- <AdsLsxf>1</AdsLsxf>
- <RvctClst>0</RvctClst>
- <GenPPlst>0</GenPPlst>
- <AdsCpuType>"Cortex-M4"</AdsCpuType>
- <RvctDeviceName></RvctDeviceName>
- <mOS>0</mOS>
- <uocRom>0</uocRom>
- <uocRam>0</uocRam>
- <hadIROM>1</hadIROM>
- <hadIRAM>1</hadIRAM>
- <hadXRAM>0</hadXRAM>
- <uocXRam>0</uocXRam>
- <RvdsVP>2</RvdsVP>
- <hadIRAM2>0</hadIRAM2>
- <hadIROM2>0</hadIROM2>
- <StupSel>8</StupSel>
- <useUlib>1</useUlib>
- <EndSel>0</EndSel>
- <uLtcg>0</uLtcg>
- <RoSelD>3</RoSelD>
- <RwSelD>3</RwSelD>
- <CodeSel>0</CodeSel>
- <OptFeed>0</OptFeed>
- <NoZi1>0</NoZi1>
- <NoZi2>0</NoZi2>
- <NoZi3>0</NoZi3>
- <NoZi4>0</NoZi4>
- <NoZi5>0</NoZi5>
- <Ro1Chk>0</Ro1Chk>
- <Ro2Chk>0</Ro2Chk>
- <Ro3Chk>0</Ro3Chk>
- <Ir1Chk>1</Ir1Chk>
- <Ir2Chk>0</Ir2Chk>
- <Ra1Chk>0</Ra1Chk>
- <Ra2Chk>0</Ra2Chk>
- <Ra3Chk>0</Ra3Chk>
- <Im1Chk>1</Im1Chk>
- <Im2Chk>0</Im2Chk>
- <OnChipMemories>
- <Ocm1>
- <Type>0</Type>
- <StartAddress>0x0</StartAddress>
- <Size>0x0</Size>
- </Ocm1>
- <Ocm2>
- <Type>0</Type>
- <StartAddress>0x0</StartAddress>
- <Size>0x0</Size>
- </Ocm2>
- <Ocm3>
- <Type>0</Type>
- <StartAddress>0x0</StartAddress>
- <Size>0x0</Size>
- </Ocm3>
- <Ocm4>
- <Type>0</Type>
- <StartAddress>0x0</StartAddress>
- <Size>0x0</Size>
- </Ocm4>
- <Ocm5>
- <Type>0</Type>
- <StartAddress>0x0</StartAddress>
- <Size>0x0</Size>
- </Ocm5>
- <Ocm6>
- <Type>0</Type>
- <StartAddress>0x0</StartAddress>
- <Size>0x0</Size>
- </Ocm6>
- <IRAM>
- <Type>0</Type>
- <StartAddress>0x20000000</StartAddress>
- <Size>0x8000</Size>
- </IRAM>
- <IROM>
- <Type>1</Type>
- <StartAddress>0x0</StartAddress>
- <Size>0x40000</Size>
- </IROM>
- <XRAM>
- <Type>0</Type>
- <StartAddress>0x0</StartAddress>
- <Size>0x0</Size>
- </XRAM>
- <OCR_RVCT1>
- <Type>1</Type>
- <StartAddress>0x0</StartAddress>
- <Size>0x0</Size>
- </OCR_RVCT1>
- <OCR_RVCT2>
- <Type>1</Type>
- <StartAddress>0x0</StartAddress>
- <Size>0x0</Size>
- </OCR_RVCT2>
- <OCR_RVCT3>
- <Type>1</Type>
- <StartAddress>0x0</StartAddress>
- <Size>0x0</Size>
- </OCR_RVCT3>
- <OCR_RVCT4>
- <Type>1</Type>
- <StartAddress>0x0</StartAddress>
- <Size>0x40000</Size>
- </OCR_RVCT4>
- <OCR_RVCT5>
- <Type>1</Type>
- <StartAddress>0x0</StartAddress>
- <Size>0x0</Size>
- </OCR_RVCT5>
- <OCR_RVCT6>
- <Type>0</Type>
- <StartAddress>0x0</StartAddress>
- <Size>0x0</Size>
- </OCR_RVCT6>
- <OCR_RVCT7>
- <Type>0</Type>
- <StartAddress>0x0</StartAddress>
- <Size>0x0</Size>
- </OCR_RVCT7>
- <OCR_RVCT8>
- <Type>0</Type>
- <StartAddress>0x0</StartAddress>
- <Size>0x0</Size>
- </OCR_RVCT8>
- <OCR_RVCT9>
- <Type>0</Type>
- <StartAddress>0x20000000</StartAddress>
- <Size>0x8000</Size>
- </OCR_RVCT9>
- <OCR_RVCT10>
- <Type>0</Type>
- <StartAddress>0x0</StartAddress>
- <Size>0x0</Size>
- </OCR_RVCT10>
- </OnChipMemories>
- <RvctStartVector></RvctStartVector>
- </ArmAdsMisc>
- <Cads>
- <interw>0</interw>
- <Optim>3</Optim>
- <oTime>0</oTime>
- <SplitLS>0</SplitLS>
- <OneElfS>1</OneElfS>
- <Strict>0</Strict>
- <EnumInt>0</EnumInt>
- <PlainCh>0</PlainCh>
- <Ropi>0</Ropi>
- <Rwpi>0</Rwpi>
- <wLevel>2</wLevel>
- <uThumb>0</uThumb>
- <VariousControls>
- <MiscControls></MiscControls>
- <Define>rvmdk PART_LM4F120H5QR TARGET_IS_BLIZZARD_RA2</Define>
- <Undefine></Undefine>
- <IncludePath>..;..\..\..;</IncludePath>
- </VariousControls>
- </Cads>
- <Aads>
- <interw>1</interw>
- <Ropi>0</Ropi>
- <Rwpi>0</Rwpi>
- <thumb>0</thumb>
- <SplitLS>0</SplitLS>
- <SwStkChk>0</SwStkChk>
- <NoWarn>0</NoWarn>
- <VariousControls>
- <MiscControls></MiscControls>
- <Define></Define>
- <Undefine></Undefine>
- <IncludePath></IncludePath>
- </VariousControls>
- </Aads>
- <LDads>
- <umfTarg>0</umfTarg>
- <Ropi>0</Ropi>
- <Rwpi>0</Rwpi>
- <noStLib>0</noStLib>
- <RepFail>1</RepFail>
- <useFile>0</useFile>
- <TextAddressRange>0x00000000</TextAddressRange>
- <DataAddressRange>0x20000000</DataAddressRange>
- <ScatterFile>project0.sct</ScatterFile>
- <IncludeLibs></IncludeLibs>
- <IncludeLibsPath></IncludeLibsPath>
- <Misc>--entry Reset_Handler</Misc>
- <LinkerInputFile></LinkerInputFile>
- <DisabledWarnings></DisabledWarnings>
- </LDads>
- </TargetArmAds>
- </TargetOption>
- <Groups>
- <Group>
- <GroupName>Source</GroupName>
- <Files>
- <File>
- <FileName>project0.c</FileName>
- <FileType>1</FileType>
- <FilePath>.\project0.c</FilePath>
- </File>
- <File>
- <FileName>startup_rvmdk.S</FileName>
- <FileType>2</FileType>
- <FilePath>.\startup_rvmdk.S</FilePath>
- </File>
- </Files>
- </Group>
- <Group>
- <GroupName>Libraries</GroupName>
- <Files>
- <File>
- <FileName>driverlib-cm4f.lib</FileName>
- <FileType>4</FileType>
- <FilePath>..\..\..\driverlib\rvmdk-cm4f\driverlib-cm4f.lib</FilePath>
- </File>
- </Files>
- </Group>
- <Group>
- <GroupName>Documentation</GroupName>
- <Files>
- <File>
- <FileName>readme.txt</FileName>
- <FileType>5</FileType>
- <FilePath>.\readme.txt</FilePath>
- </File>
- </Files>
- </Group>
- </Groups>
- </Target>
- </Targets>
-
-</Project>
diff --git a/project0/project0_ccs.cmd b/project0/project0_ccs.cmd deleted file mode 100644 index 94f8933..0000000 --- a/project0/project0_ccs.cmd +++ /dev/null @@ -1,70 +0,0 @@ -/******************************************************************************
- *
- * project0_ccs.cmd - CCS linker configuration file for project0.
- *
- * Copyright (c) 2012 Texas Instruments Incorporated. All rights reserved.
- * Software License Agreement
- *
- * Texas Instruments (TI) is supplying this software for use solely and
- * exclusively on TI's microcontroller products. The software is owned by
- * TI and/or its suppliers, and is protected under applicable copyright
- * laws. You may not combine this software with "viral" open-source
- * software in order to form a larger program.
- *
- * THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
- * NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
- * NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
- * CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
- * DAMAGES, FOR ANY REASON WHATSOEVER.
- *
- * This is part of revision 9453 of the EK-LM4F120XL Firmware Package.
- *
- *****************************************************************************/
-
---retain=g_pfnVectors
-
-/* The following command line options are set as part of the CCS project. */
-/* If you are building using the command line, or for some reason want to */
-/* define them here, you can uncomment and modify these lines as needed. */
-/* If you are using CCS for building, it is probably better to make any such */
-/* modifications in your CCS project and leave this file alone. */
-/* */
-/* --heap_size=0 */
-/* --stack_size=256 */
-/* --library=rtsv7M3_T_le_eabi.lib */
-
-/* The starting address of the application. Normally the interrupt vectors */
-/* must be located at the beginning of the application. */
-#define APP_BASE 0x00000000
-#define RAM_BASE 0x20000000
-
-/* System memory map */
-
-MEMORY
-{
- /* Application stored in and executes from internal flash */
- FLASH (RX) : origin = APP_BASE, length = 0x00040000
- /* Application uses internal RAM for data */
- SRAM (RWX) : origin = 0x20000000, length = 0x00008000
-}
-
-/* Section allocation in memory */
-
-SECTIONS
-{
- .intvecs: > APP_BASE
- .text : > FLASH
- .const : > FLASH
- .cinit : > FLASH
- .pinit : > FLASH
- .init_array : > FLASH
-
- .vtable : > RAM_BASE
- .data : > SRAM
- .bss : > SRAM
- .sysmem : > SRAM
- .stack : > SRAM
-}
-
-__STACK_TOP = __stack + 256;
diff --git a/project0/project0_sourcerygxx.ld b/project0/project0_sourcerygxx.ld deleted file mode 100644 index 0a3e316..0000000 --- a/project0/project0_sourcerygxx.ld +++ /dev/null @@ -1,31 +0,0 @@ -/******************************************************************************
- *
- * project0_sourcerygxx.ld - Scatter file for Sourcery CodeBench
- *
- * Copyright (c) 2012 Texas Instruments Incorporated. All rights reserved.
- * Software License Agreement
- *
- * Texas Instruments (TI) is supplying this software for use solely and
- * exclusively on TI's microcontroller products. The software is owned by
- * TI and/or its suppliers, and is protected under applicable copyright
- * laws. You may not combine this software with "viral" open-source
- * software in order to form a larger program.
- *
- * THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
- * NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
- * NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
- * CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
- * DAMAGES, FOR ANY REASON WHATSOEVER.
- *
- * This is part of revision 9453 of the EK-LM4F120XL Firmware Package.
- *
- *****************************************************************************/
-
-/******************************************************************************
- *
- * Define the end of the heap space, which determines the beginning of the
- * stack space.
- *
- *****************************************************************************/
-__cs3_heap_end = __cs3_region_end_ram - 256;
diff --git a/project0/readme.txt b/project0/readme.txt deleted file mode 100644 index 390355d..0000000 --- a/project0/readme.txt +++ /dev/null @@ -1,28 +0,0 @@ -Project Zero
-
-This example demonstrates the use of StellarisWare to setup the clocks
-and toggle GPIO pins to make the LED's blink. This is a good place to
-start understanding your launchpad and the tools that can be used to
-program it. See http://www.ti.com/stellaris-launchpad/project0 for more
-information and tutorial videos.
-
-
--------------------------------------------------------------------------------
-
-Copyright (c) 2012 Texas Instruments Incorporated. All rights reserved.
-Software License Agreement
-
-Texas Instruments (TI) is supplying this software for use solely and
-exclusively on TI's microcontroller products. The software is owned by
-TI and/or its suppliers, and is protected under applicable copyright
-laws. You may not combine this software with "viral" open-source
-software in order to form a larger program.
-
-THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
-NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
-NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
-CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
-DAMAGES, FOR ANY REASON WHATSOEVER.
-
-This is part of revision 9453 of the EK-LM4F120XL Firmware Package.
diff --git a/project0/rvmdk/project0.axf b/project0/rvmdk/project0.axf Binary files differdeleted file mode 100644 index 118732a..0000000 --- a/project0/rvmdk/project0.axf +++ /dev/null diff --git a/project0/rvmdk/project0.bin b/project0/rvmdk/project0.bin Binary files differdeleted file mode 100644 index c889517..0000000 --- a/project0/rvmdk/project0.bin +++ /dev/null diff --git a/project0/sourcerygxx/project0.axf b/project0/sourcerygxx/project0.axf Binary files differdeleted file mode 100644 index 1150349..0000000 --- a/project0/sourcerygxx/project0.axf +++ /dev/null diff --git a/project0/sourcerygxx/project0.bin b/project0/sourcerygxx/project0.bin Binary files differdeleted file mode 100644 index 867049c..0000000 --- a/project0/sourcerygxx/project0.bin +++ /dev/null diff --git a/project0/startup_ccs.c b/project0/startup_ccs.c deleted file mode 100644 index 9f15b47..0000000 --- a/project0/startup_ccs.c +++ /dev/null @@ -1,291 +0,0 @@ -//*****************************************************************************
-//
-// startup_ccs.c - Startup code for use with TI's Code Composer Studio.
-//
-// Copyright (c) 2012 Texas Instruments Incorporated. All rights reserved.
-// Software License Agreement
-//
-// Texas Instruments (TI) is supplying this software for use solely and
-// exclusively on TI's microcontroller products. The software is owned by
-// TI and/or its suppliers, and is protected under applicable copyright
-// laws. You may not combine this software with "viral" open-source
-// software in order to form a larger program.
-//
-// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
-// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
-// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
-// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
-// DAMAGES, FOR ANY REASON WHATSOEVER.
-//
-// This is part of revision 9453 of the EK-LM4F120XL Firmware Package.
-//
-//*****************************************************************************
-
-//*****************************************************************************
-//
-// Forward declaration of the default fault handlers.
-//
-//*****************************************************************************
-void ResetISR(void);
-static void NmiSR(void);
-static void FaultISR(void);
-static void IntDefaultHandler(void);
-
-//*****************************************************************************
-//
-// External declaration for the reset handler that is to be called when the
-// processor is started
-//
-//*****************************************************************************
-extern void _c_int00(void);
-
-//*****************************************************************************
-//
-// Linker variable that marks the top of the stack.
-//
-//*****************************************************************************
-extern unsigned long __STACK_TOP;
-
-//*****************************************************************************
-//
-// The vector table. Note that the proper constructs must be placed on this to
-// ensure that it ends up at physical address 0x0000.0000 or at the start of
-// the program if located at a start address other than 0.
-//
-//*****************************************************************************
-#pragma DATA_SECTION(g_pfnVectors, ".intvecs")
-void (* const g_pfnVectors[])(void) =
-{
- (void (*)(void))((unsigned long)&__STACK_TOP),
- // The initial stack pointer
- ResetISR, // The reset handler
- NmiSR, // The NMI handler
- FaultISR, // The hard fault handler
- IntDefaultHandler, // The MPU fault handler
- IntDefaultHandler, // The bus fault handler
- IntDefaultHandler, // The usage fault handler
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- IntDefaultHandler, // SVCall handler
- IntDefaultHandler, // Debug monitor handler
- 0, // Reserved
- IntDefaultHandler, // The PendSV handler
- IntDefaultHandler, // The SysTick handler
- IntDefaultHandler, // GPIO Port A
- IntDefaultHandler, // GPIO Port B
- IntDefaultHandler, // GPIO Port C
- IntDefaultHandler, // GPIO Port D
- IntDefaultHandler, // GPIO Port E
- IntDefaultHandler, // UART0 Rx and Tx
- IntDefaultHandler, // UART1 Rx and Tx
- IntDefaultHandler, // SSI0 Rx and Tx
- IntDefaultHandler, // I2C0 Master and Slave
- IntDefaultHandler, // PWM Fault
- IntDefaultHandler, // PWM Generator 0
- IntDefaultHandler, // PWM Generator 1
- IntDefaultHandler, // PWM Generator 2
- IntDefaultHandler, // Quadrature Encoder 0
- IntDefaultHandler, // ADC Sequence 0
- IntDefaultHandler, // ADC Sequence 1
- IntDefaultHandler, // ADC Sequence 2
- IntDefaultHandler, // ADC Sequence 3
- IntDefaultHandler, // Watchdog timer
- IntDefaultHandler, // Timer 0 subtimer A
- IntDefaultHandler, // Timer 0 subtimer B
- IntDefaultHandler, // Timer 1 subtimer A
- IntDefaultHandler, // Timer 1 subtimer B
- IntDefaultHandler, // Timer 2 subtimer A
- IntDefaultHandler, // Timer 2 subtimer B
- IntDefaultHandler, // Analog Comparator 0
- IntDefaultHandler, // Analog Comparator 1
- IntDefaultHandler, // Analog Comparator 2
- IntDefaultHandler, // System Control (PLL, OSC, BO)
- IntDefaultHandler, // FLASH Control
- IntDefaultHandler, // GPIO Port F
- IntDefaultHandler, // GPIO Port G
- IntDefaultHandler, // GPIO Port H
- IntDefaultHandler, // UART2 Rx and Tx
- IntDefaultHandler, // SSI1 Rx and Tx
- IntDefaultHandler, // Timer 3 subtimer A
- IntDefaultHandler, // Timer 3 subtimer B
- IntDefaultHandler, // I2C1 Master and Slave
- IntDefaultHandler, // Quadrature Encoder 1
- IntDefaultHandler, // CAN0
- IntDefaultHandler, // CAN1
- IntDefaultHandler, // CAN2
- IntDefaultHandler, // Ethernet
- IntDefaultHandler, // Hibernate
- IntDefaultHandler, // USB0
- IntDefaultHandler, // PWM Generator 3
- IntDefaultHandler, // uDMA Software Transfer
- IntDefaultHandler, // uDMA Error
- IntDefaultHandler, // ADC1 Sequence 0
- IntDefaultHandler, // ADC1 Sequence 1
- IntDefaultHandler, // ADC1 Sequence 2
- IntDefaultHandler, // ADC1 Sequence 3
- IntDefaultHandler, // I2S0
- IntDefaultHandler, // External Bus Interface 0
- IntDefaultHandler, // GPIO Port J
- IntDefaultHandler, // GPIO Port K
- IntDefaultHandler, // GPIO Port L
- IntDefaultHandler, // SSI2 Rx and Tx
- IntDefaultHandler, // SSI3 Rx and Tx
- IntDefaultHandler, // UART3 Rx and Tx
- IntDefaultHandler, // UART4 Rx and Tx
- IntDefaultHandler, // UART5 Rx and Tx
- IntDefaultHandler, // UART6 Rx and Tx
- IntDefaultHandler, // UART7 Rx and Tx
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- IntDefaultHandler, // I2C2 Master and Slave
- IntDefaultHandler, // I2C3 Master and Slave
- IntDefaultHandler, // Timer 4 subtimer A
- IntDefaultHandler, // Timer 4 subtimer B
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- IntDefaultHandler, // Timer 5 subtimer A
- IntDefaultHandler, // Timer 5 subtimer B
- IntDefaultHandler, // Wide Timer 0 subtimer A
- IntDefaultHandler, // Wide Timer 0 subtimer B
- IntDefaultHandler, // Wide Timer 1 subtimer A
- IntDefaultHandler, // Wide Timer 1 subtimer B
- IntDefaultHandler, // Wide Timer 2 subtimer A
- IntDefaultHandler, // Wide Timer 2 subtimer B
- IntDefaultHandler, // Wide Timer 3 subtimer A
- IntDefaultHandler, // Wide Timer 3 subtimer B
- IntDefaultHandler, // Wide Timer 4 subtimer A
- IntDefaultHandler, // Wide Timer 4 subtimer B
- IntDefaultHandler, // Wide Timer 5 subtimer A
- IntDefaultHandler, // Wide Timer 5 subtimer B
- IntDefaultHandler, // FPU
- IntDefaultHandler, // PECI 0
- IntDefaultHandler, // LPC 0
- IntDefaultHandler, // I2C4 Master and Slave
- IntDefaultHandler, // I2C5 Master and Slave
- IntDefaultHandler, // GPIO Port M
- IntDefaultHandler, // GPIO Port N
- IntDefaultHandler, // Quadrature Encoder 2
- IntDefaultHandler, // Fan 0
- 0, // Reserved
- IntDefaultHandler, // GPIO Port P (Summary or P0)
- IntDefaultHandler, // GPIO Port P1
- IntDefaultHandler, // GPIO Port P2
- IntDefaultHandler, // GPIO Port P3
- IntDefaultHandler, // GPIO Port P4
- IntDefaultHandler, // GPIO Port P5
- IntDefaultHandler, // GPIO Port P6
- IntDefaultHandler, // GPIO Port P7
- IntDefaultHandler, // GPIO Port Q (Summary or Q0)
- IntDefaultHandler, // GPIO Port Q1
- IntDefaultHandler, // GPIO Port Q2
- IntDefaultHandler, // GPIO Port Q3
- IntDefaultHandler, // GPIO Port Q4
- IntDefaultHandler, // GPIO Port Q5
- IntDefaultHandler, // GPIO Port Q6
- IntDefaultHandler, // GPIO Port Q7
- IntDefaultHandler, // GPIO Port R
- IntDefaultHandler, // GPIO Port S
- IntDefaultHandler, // PWM 1 Generator 0
- IntDefaultHandler, // PWM 1 Generator 1
- IntDefaultHandler, // PWM 1 Generator 2
- IntDefaultHandler, // PWM 1 Generator 3
- IntDefaultHandler // PWM 1 Fault
-};
-
-//*****************************************************************************
-//
-// This is the code that gets called when the processor first starts execution
-// following a reset event. Only the absolutely necessary set is performed,
-// after which the application supplied entry() routine is called. Any fancy
-// actions (such as making decisions based on the reset cause register, and
-// resetting the bits in that register) are left solely in the hands of the
-// application.
-//
-//*****************************************************************************
-void
-ResetISR(void)
-{
- //
- // Jump to the CCS C initialization routine. This will enable the
- // floating-point unit as well, so that does not need to be done here.
- //
- __asm(" .global _c_int00\n"
- " b.w _c_int00");
-}
-
-//*****************************************************************************
-//
-// This is the code that gets called when the processor receives a NMI. This
-// simply enters an infinite loop, preserving the system state for examination
-// by a debugger.
-//
-//*****************************************************************************
-static void
-NmiSR(void)
-{
- //
- // Enter an infinite loop.
- //
- while(1)
- {
- }
-}
-
-//*****************************************************************************
-//
-// This is the code that gets called when the processor receives a fault
-// interrupt. This simply enters an infinite loop, preserving the system state
-// for examination by a debugger.
-//
-//*****************************************************************************
-static void
-FaultISR(void)
-{
- //
- // Enter an infinite loop.
- //
- while(1)
- {
- }
-}
-
-//*****************************************************************************
-//
-// This is the code that gets called when the processor receives an unexpected
-// interrupt. This simply enters an infinite loop, preserving the system state
-// for examination by a debugger.
-//
-//*****************************************************************************
-static void
-IntDefaultHandler(void)
-{
- //
- // Go into an infinite loop.
- //
- while(1)
- {
- }
-}
diff --git a/project0/startup_ewarm.c b/project0/startup_ewarm.c deleted file mode 100644 index d7c43dd..0000000 --- a/project0/startup_ewarm.c +++ /dev/null @@ -1,325 +0,0 @@ -//*****************************************************************************
-//
-// startup_ewarm.c - Startup code for use with IAR's Embedded Workbench,
-// version 5.
-//
-// Copyright (c) 2012 Texas Instruments Incorporated. All rights reserved.
-// Software License Agreement
-//
-// Texas Instruments (TI) is supplying this software for use solely and
-// exclusively on TI's microcontroller products. The software is owned by
-// TI and/or its suppliers, and is protected under applicable copyright
-// laws. You may not combine this software with "viral" open-source
-// software in order to form a larger program.
-//
-// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
-// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
-// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
-// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
-// DAMAGES, FOR ANY REASON WHATSOEVER.
-//
-// This is part of revision 9453 of the EK-LM4F120XL Firmware Package.
-//
-//*****************************************************************************
-
-#include "inc/hw_nvic.h"
-#include "inc/hw_types.h"
-
-//*****************************************************************************
-//
-// Enable the IAR extensions for this source file.
-//
-//*****************************************************************************
-#pragma language=extended
-
-//*****************************************************************************
-//
-// Forward declaration of the default fault handlers.
-//
-//*****************************************************************************
-void ResetISR(void);
-static void NmiSR(void);
-static void FaultISR(void);
-static void IntDefaultHandler(void);
-
-//*****************************************************************************
-//
-// The entry point for the application startup code.
-//
-//*****************************************************************************
-extern void __iar_program_start(void);
-
-//*****************************************************************************
-//
-// Reserve space for the system stack.
-//
-//*****************************************************************************
-static unsigned long pulStack[64] @ ".noinit";
-
-//*****************************************************************************
-//
-// A union that describes the entries of the vector table. The union is needed
-// since the first entry is the stack pointer and the remainder are function
-// pointers.
-//
-//*****************************************************************************
-typedef union
-{
- void (*pfnHandler)(void);
- unsigned long ulPtr;
-}
-uVectorEntry;
-
-//*****************************************************************************
-//
-// The vector table. Note that the proper constructs must be placed on this to
-// ensure that it ends up at physical address 0x0000.0000.
-//
-//*****************************************************************************
-__root const uVectorEntry __vector_table[] @ ".intvec" =
-{
- { .ulPtr = (unsigned long)pulStack + sizeof(pulStack) },
- // The initial stack pointer
- ResetISR, // The reset handler
- NmiSR, // The NMI handler
- FaultISR, // The hard fault handler
- IntDefaultHandler, // The MPU fault handler
- IntDefaultHandler, // The bus fault handler
- IntDefaultHandler, // The usage fault handler
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- IntDefaultHandler, // SVCall handler
- IntDefaultHandler, // Debug monitor handler
- 0, // Reserved
- IntDefaultHandler, // The PendSV handler
- IntDefaultHandler, // The SysTick handler
- IntDefaultHandler, // GPIO Port A
- IntDefaultHandler, // GPIO Port B
- IntDefaultHandler, // GPIO Port C
- IntDefaultHandler, // GPIO Port D
- IntDefaultHandler, // GPIO Port E
- IntDefaultHandler, // UART0 Rx and Tx
- IntDefaultHandler, // UART1 Rx and Tx
- IntDefaultHandler, // SSI0 Rx and Tx
- IntDefaultHandler, // I2C0 Master and Slave
- IntDefaultHandler, // PWM Fault
- IntDefaultHandler, // PWM Generator 0
- IntDefaultHandler, // PWM Generator 1
- IntDefaultHandler, // PWM Generator 2
- IntDefaultHandler, // Quadrature Encoder 0
- IntDefaultHandler, // ADC Sequence 0
- IntDefaultHandler, // ADC Sequence 1
- IntDefaultHandler, // ADC Sequence 2
- IntDefaultHandler, // ADC Sequence 3
- IntDefaultHandler, // Watchdog timer
- IntDefaultHandler, // Timer 0 subtimer A
- IntDefaultHandler, // Timer 0 subtimer B
- IntDefaultHandler, // Timer 1 subtimer A
- IntDefaultHandler, // Timer 1 subtimer B
- IntDefaultHandler, // Timer 2 subtimer A
- IntDefaultHandler, // Timer 2 subtimer B
- IntDefaultHandler, // Analog Comparator 0
- IntDefaultHandler, // Analog Comparator 1
- IntDefaultHandler, // Analog Comparator 2
- IntDefaultHandler, // System Control (PLL, OSC, BO)
- IntDefaultHandler, // FLASH Control
- IntDefaultHandler, // GPIO Port F
- IntDefaultHandler, // GPIO Port G
- IntDefaultHandler, // GPIO Port H
- IntDefaultHandler, // UART2 Rx and Tx
- IntDefaultHandler, // SSI1 Rx and Tx
- IntDefaultHandler, // Timer 3 subtimer A
- IntDefaultHandler, // Timer 3 subtimer B
- IntDefaultHandler, // I2C1 Master and Slave
- IntDefaultHandler, // Quadrature Encoder 1
- IntDefaultHandler, // CAN0
- IntDefaultHandler, // CAN1
- IntDefaultHandler, // CAN2
- IntDefaultHandler, // Ethernet
- IntDefaultHandler, // Hibernate
- IntDefaultHandler, // USB0
- IntDefaultHandler, // PWM Generator 3
- IntDefaultHandler, // uDMA Software Transfer
- IntDefaultHandler, // uDMA Error
- IntDefaultHandler, // ADC1 Sequence 0
- IntDefaultHandler, // ADC1 Sequence 1
- IntDefaultHandler, // ADC1 Sequence 2
- IntDefaultHandler, // ADC1 Sequence 3
- IntDefaultHandler, // I2S0
- IntDefaultHandler, // External Bus Interface 0
- IntDefaultHandler, // GPIO Port J
- IntDefaultHandler, // GPIO Port K
- IntDefaultHandler, // GPIO Port L
- IntDefaultHandler, // SSI2 Rx and Tx
- IntDefaultHandler, // SSI3 Rx and Tx
- IntDefaultHandler, // UART3 Rx and Tx
- IntDefaultHandler, // UART4 Rx and Tx
- IntDefaultHandler, // UART5 Rx and Tx
- IntDefaultHandler, // UART6 Rx and Tx
- IntDefaultHandler, // UART7 Rx and Tx
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- IntDefaultHandler, // I2C2 Master and Slave
- IntDefaultHandler, // I2C3 Master and Slave
- IntDefaultHandler, // Timer 4 subtimer A
- IntDefaultHandler, // Timer 4 subtimer B
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- IntDefaultHandler, // Timer 5 subtimer A
- IntDefaultHandler, // Timer 5 subtimer B
- IntDefaultHandler, // Wide Timer 0 subtimer A
- IntDefaultHandler, // Wide Timer 0 subtimer B
- IntDefaultHandler, // Wide Timer 1 subtimer A
- IntDefaultHandler, // Wide Timer 1 subtimer B
- IntDefaultHandler, // Wide Timer 2 subtimer A
- IntDefaultHandler, // Wide Timer 2 subtimer B
- IntDefaultHandler, // Wide Timer 3 subtimer A
- IntDefaultHandler, // Wide Timer 3 subtimer B
- IntDefaultHandler, // Wide Timer 4 subtimer A
- IntDefaultHandler, // Wide Timer 4 subtimer B
- IntDefaultHandler, // Wide Timer 5 subtimer A
- IntDefaultHandler, // Wide Timer 5 subtimer B
- IntDefaultHandler, // FPU
- IntDefaultHandler, // PECI 0
- IntDefaultHandler, // LPC 0
- IntDefaultHandler, // I2C4 Master and Slave
- IntDefaultHandler, // I2C5 Master and Slave
- IntDefaultHandler, // GPIO Port M
- IntDefaultHandler, // GPIO Port N
- IntDefaultHandler, // Quadrature Encoder 2
- IntDefaultHandler, // Fan 0
- 0, // Reserved
- IntDefaultHandler, // GPIO Port P (Summary or P0)
- IntDefaultHandler, // GPIO Port P1
- IntDefaultHandler, // GPIO Port P2
- IntDefaultHandler, // GPIO Port P3
- IntDefaultHandler, // GPIO Port P4
- IntDefaultHandler, // GPIO Port P5
- IntDefaultHandler, // GPIO Port P6
- IntDefaultHandler, // GPIO Port P7
- IntDefaultHandler, // GPIO Port Q (Summary or Q0)
- IntDefaultHandler, // GPIO Port Q1
- IntDefaultHandler, // GPIO Port Q2
- IntDefaultHandler, // GPIO Port Q3
- IntDefaultHandler, // GPIO Port Q4
- IntDefaultHandler, // GPIO Port Q5
- IntDefaultHandler, // GPIO Port Q6
- IntDefaultHandler, // GPIO Port Q7
- IntDefaultHandler, // GPIO Port R
- IntDefaultHandler, // GPIO Port S
- IntDefaultHandler, // PWM 1 Generator 0
- IntDefaultHandler, // PWM 1 Generator 1
- IntDefaultHandler, // PWM 1 Generator 2
- IntDefaultHandler, // PWM 1 Generator 3
- IntDefaultHandler // PWM 1 Fault
-};
-
-//*****************************************************************************
-//
-// This is the code that gets called when the processor first starts execution
-// following a reset event. Only the absolutely necessary set is performed,
-// after which the application supplied entry() routine is called. Any fancy
-// actions (such as making decisions based on the reset cause register, and
-// resetting the bits in that register) are left solely in the hands of the
-// application.
-//
-//*****************************************************************************
-void
-ResetISR(void)
-{
- //
- // Enable the floating-point unit. This must be done here to handle the
- // case where main() uses floating-point and the function prologue saves
- // floating-point registers (which will fault if floating-point is not
- // enabled). Any configuration of the floating-point unit using DriverLib
- // APIs must be done here prior to the floating-point unit being enabled.
- //
- // Note that this does not use DriverLib since it might not be included in
- // this project.
- //
- HWREG(NVIC_CPAC) = ((HWREG(NVIC_CPAC) &
- ~(NVIC_CPAC_CP10_M | NVIC_CPAC_CP11_M)) |
- NVIC_CPAC_CP10_FULL | NVIC_CPAC_CP11_FULL);
-
- //
- // Call the application's entry point.
- //
- __iar_program_start();
-}
-
-//*****************************************************************************
-//
-// This is the code that gets called when the processor receives a NMI. This
-// simply enters an infinite loop, preserving the system state for examination
-// by a debugger.
-//
-//*****************************************************************************
-static void
-NmiSR(void)
-{
- //
- // Enter an infinite loop.
- //
- while(1)
- {
- }
-}
-
-//*****************************************************************************
-//
-// This is the code that gets called when the processor receives a fault
-// interrupt. This simply enters an infinite loop, preserving the system state
-// for examination by a debugger.
-//
-//*****************************************************************************
-static void
-FaultISR(void)
-{
- //
- // Enter an infinite loop.
- //
- while(1)
- {
- }
-}
-
-//*****************************************************************************
-//
-// This is the code that gets called when the processor receives an unexpected
-// interrupt. This simply enters an infinite loop, preserving the system state
-// for examination by a debugger.
-//
-//*****************************************************************************
-static void
-IntDefaultHandler(void)
-{
- //
- // Go into an infinite loop.
- //
- while(1)
- {
- }
-}
diff --git a/project0/startup_gcc.c b/project0/startup_gcc.c deleted file mode 100644 index 85b7513..0000000 --- a/project0/startup_gcc.c +++ /dev/null @@ -1,341 +0,0 @@ -//*****************************************************************************
-//
-// startup_gcc.c - Startup code for use with GNU tools.
-//
-// Copyright (c) 2012 Texas Instruments Incorporated. All rights reserved.
-// Software License Agreement
-//
-// Texas Instruments (TI) is supplying this software for use solely and
-// exclusively on TI's microcontroller products. The software is owned by
-// TI and/or its suppliers, and is protected under applicable copyright
-// laws. You may not combine this software with "viral" open-source
-// software in order to form a larger program.
-//
-// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
-// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
-// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
-// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
-// DAMAGES, FOR ANY REASON WHATSOEVER.
-//
-// This is part of revision 9453 of the EK-LM4F120XL Firmware Package.
-//
-//*****************************************************************************
-
-#include "inc/hw_nvic.h"
-#include "inc/hw_types.h"
-
-//*****************************************************************************
-//
-// Forward declaration of the default fault handlers.
-//
-//*****************************************************************************
-void ResetISR(void);
-static void NmiSR(void);
-static void FaultISR(void);
-static void IntDefaultHandler(void);
-
-//*****************************************************************************
-//
-// The entry point for the application.
-//
-//*****************************************************************************
-extern int main(void);
-
-//*****************************************************************************
-//
-// Reserve space for the system stack.
-//
-//*****************************************************************************
-static unsigned long pulStack[64];
-
-//*****************************************************************************
-//
-// The vector table. Note that the proper constructs must be placed on this to
-// ensure that it ends up at physical address 0x0000.0000.
-//
-//*****************************************************************************
-__attribute__ ((section(".isr_vector")))
-void (* const g_pfnVectors[])(void) =
-{
- (void (*)(void))((unsigned long)pulStack + sizeof(pulStack)),
- // The initial stack pointer
- ResetISR, // The reset handler
- NmiSR, // The NMI handler
- FaultISR, // The hard fault handler
- IntDefaultHandler, // The MPU fault handler
- IntDefaultHandler, // The bus fault handler
- IntDefaultHandler, // The usage fault handler
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- IntDefaultHandler, // SVCall handler
- IntDefaultHandler, // Debug monitor handler
- 0, // Reserved
- IntDefaultHandler, // The PendSV handler
- IntDefaultHandler, // The SysTick handler
- IntDefaultHandler, // GPIO Port A
- IntDefaultHandler, // GPIO Port B
- IntDefaultHandler, // GPIO Port C
- IntDefaultHandler, // GPIO Port D
- IntDefaultHandler, // GPIO Port E
- IntDefaultHandler, // UART0 Rx and Tx
- IntDefaultHandler, // UART1 Rx and Tx
- IntDefaultHandler, // SSI0 Rx and Tx
- IntDefaultHandler, // I2C0 Master and Slave
- IntDefaultHandler, // PWM Fault
- IntDefaultHandler, // PWM Generator 0
- IntDefaultHandler, // PWM Generator 1
- IntDefaultHandler, // PWM Generator 2
- IntDefaultHandler, // Quadrature Encoder 0
- IntDefaultHandler, // ADC Sequence 0
- IntDefaultHandler, // ADC Sequence 1
- IntDefaultHandler, // ADC Sequence 2
- IntDefaultHandler, // ADC Sequence 3
- IntDefaultHandler, // Watchdog timer
- IntDefaultHandler, // Timer 0 subtimer A
- IntDefaultHandler, // Timer 0 subtimer B
- IntDefaultHandler, // Timer 1 subtimer A
- IntDefaultHandler, // Timer 1 subtimer B
- IntDefaultHandler, // Timer 2 subtimer A
- IntDefaultHandler, // Timer 2 subtimer B
- IntDefaultHandler, // Analog Comparator 0
- IntDefaultHandler, // Analog Comparator 1
- IntDefaultHandler, // Analog Comparator 2
- IntDefaultHandler, // System Control (PLL, OSC, BO)
- IntDefaultHandler, // FLASH Control
- IntDefaultHandler, // GPIO Port F
- IntDefaultHandler, // GPIO Port G
- IntDefaultHandler, // GPIO Port H
- IntDefaultHandler, // UART2 Rx and Tx
- IntDefaultHandler, // SSI1 Rx and Tx
- IntDefaultHandler, // Timer 3 subtimer A
- IntDefaultHandler, // Timer 3 subtimer B
- IntDefaultHandler, // I2C1 Master and Slave
- IntDefaultHandler, // Quadrature Encoder 1
- IntDefaultHandler, // CAN0
- IntDefaultHandler, // CAN1
- IntDefaultHandler, // CAN2
- IntDefaultHandler, // Ethernet
- IntDefaultHandler, // Hibernate
- IntDefaultHandler, // USB0
- IntDefaultHandler, // PWM Generator 3
- IntDefaultHandler, // uDMA Software Transfer
- IntDefaultHandler, // uDMA Error
- IntDefaultHandler, // ADC1 Sequence 0
- IntDefaultHandler, // ADC1 Sequence 1
- IntDefaultHandler, // ADC1 Sequence 2
- IntDefaultHandler, // ADC1 Sequence 3
- IntDefaultHandler, // I2S0
- IntDefaultHandler, // External Bus Interface 0
- IntDefaultHandler, // GPIO Port J
- IntDefaultHandler, // GPIO Port K
- IntDefaultHandler, // GPIO Port L
- IntDefaultHandler, // SSI2 Rx and Tx
- IntDefaultHandler, // SSI3 Rx and Tx
- IntDefaultHandler, // UART3 Rx and Tx
- IntDefaultHandler, // UART4 Rx and Tx
- IntDefaultHandler, // UART5 Rx and Tx
- IntDefaultHandler, // UART6 Rx and Tx
- IntDefaultHandler, // UART7 Rx and Tx
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- IntDefaultHandler, // I2C2 Master and Slave
- IntDefaultHandler, // I2C3 Master and Slave
- IntDefaultHandler, // Timer 4 subtimer A
- IntDefaultHandler, // Timer 4 subtimer B
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- 0, // Reserved
- IntDefaultHandler, // Timer 5 subtimer A
- IntDefaultHandler, // Timer 5 subtimer B
- IntDefaultHandler, // Wide Timer 0 subtimer A
- IntDefaultHandler, // Wide Timer 0 subtimer B
- IntDefaultHandler, // Wide Timer 1 subtimer A
- IntDefaultHandler, // Wide Timer 1 subtimer B
- IntDefaultHandler, // Wide Timer 2 subtimer A
- IntDefaultHandler, // Wide Timer 2 subtimer B
- IntDefaultHandler, // Wide Timer 3 subtimer A
- IntDefaultHandler, // Wide Timer 3 subtimer B
- IntDefaultHandler, // Wide Timer 4 subtimer A
- IntDefaultHandler, // Wide Timer 4 subtimer B
- IntDefaultHandler, // Wide Timer 5 subtimer A
- IntDefaultHandler, // Wide Timer 5 subtimer B
- IntDefaultHandler, // FPU
- IntDefaultHandler, // PECI 0
- IntDefaultHandler, // LPC 0
- IntDefaultHandler, // I2C4 Master and Slave
- IntDefaultHandler, // I2C5 Master and Slave
- IntDefaultHandler, // GPIO Port M
- IntDefaultHandler, // GPIO Port N
- IntDefaultHandler, // Quadrature Encoder 2
- IntDefaultHandler, // Fan 0
- 0, // Reserved
- IntDefaultHandler, // GPIO Port P (Summary or P0)
- IntDefaultHandler, // GPIO Port P1
- IntDefaultHandler, // GPIO Port P2
- IntDefaultHandler, // GPIO Port P3
- IntDefaultHandler, // GPIO Port P4
- IntDefaultHandler, // GPIO Port P5
- IntDefaultHandler, // GPIO Port P6
- IntDefaultHandler, // GPIO Port P7
- IntDefaultHandler, // GPIO Port Q (Summary or Q0)
- IntDefaultHandler, // GPIO Port Q1
- IntDefaultHandler, // GPIO Port Q2
- IntDefaultHandler, // GPIO Port Q3
- IntDefaultHandler, // GPIO Port Q4
- IntDefaultHandler, // GPIO Port Q5
- IntDefaultHandler, // GPIO Port Q6
- IntDefaultHandler, // GPIO Port Q7
- IntDefaultHandler, // GPIO Port R
- IntDefaultHandler, // GPIO Port S
- IntDefaultHandler, // PWM 1 Generator 0
- IntDefaultHandler, // PWM 1 Generator 1
- IntDefaultHandler, // PWM 1 Generator 2
- IntDefaultHandler, // PWM 1 Generator 3
- IntDefaultHandler // PWM 1 Fault
-};
-
-//*****************************************************************************
-//
-// The following are constructs created by the linker, indicating where the
-// the "data" and "bss" segments reside in memory. The initializers for the
-// for the "data" segment resides immediately following the "text" segment.
-//
-//*****************************************************************************
-extern unsigned long _etext;
-extern unsigned long _data;
-extern unsigned long _edata;
-extern unsigned long _bss;
-extern unsigned long _ebss;
-
-//*****************************************************************************
-//
-// This is the code that gets called when the processor first starts execution
-// following a reset event. Only the absolutely necessary set is performed,
-// after which the application supplied entry() routine is called. Any fancy
-// actions (such as making decisions based on the reset cause register, and
-// resetting the bits in that register) are left solely in the hands of the
-// application.
-//
-//*****************************************************************************
-void
-ResetISR(void)
-{
- unsigned long *pulSrc, *pulDest;
-
- //
- // Copy the data segment initializers from flash to SRAM.
- //
- pulSrc = &_etext;
- for(pulDest = &_data; pulDest < &_edata; )
- {
- *pulDest++ = *pulSrc++;
- }
-
- //
- // Zero fill the bss segment.
- //
- __asm(" ldr r0, =_bss\n"
- " ldr r1, =_ebss\n"
- " mov r2, #0\n"
- " .thumb_func\n"
- "zero_loop:\n"
- " cmp r0, r1\n"
- " it lt\n"
- " strlt r2, [r0], #4\n"
- " blt zero_loop");
-
- //
- // Enable the floating-point unit. This must be done here to handle the
- // case where main() uses floating-point and the function prologue saves
- // floating-point registers (which will fault if floating-point is not
- // enabled). Any configuration of the floating-point unit using DriverLib
- // APIs must be done here prior to the floating-point unit being enabled.
- //
- // Note that this does not use DriverLib since it might not be included in
- // this project.
- //
- HWREG(NVIC_CPAC) = ((HWREG(NVIC_CPAC) &
- ~(NVIC_CPAC_CP10_M | NVIC_CPAC_CP11_M)) |
- NVIC_CPAC_CP10_FULL | NVIC_CPAC_CP11_FULL);
-
- //
- // Call the application's entry point.
- //
- main();
-}
-
-//*****************************************************************************
-//
-// This is the code that gets called when the processor receives a NMI. This
-// simply enters an infinite loop, preserving the system state for examination
-// by a debugger.
-//
-//*****************************************************************************
-static void
-NmiSR(void)
-{
- //
- // Enter an infinite loop.
- //
- while(1)
- {
- }
-}
-
-//*****************************************************************************
-//
-// This is the code that gets called when the processor receives a fault
-// interrupt. This simply enters an infinite loop, preserving the system state
-// for examination by a debugger.
-//
-//*****************************************************************************
-static void
-FaultISR(void)
-{
- //
- // Enter an infinite loop.
- //
- while(1)
- {
- }
-}
-
-//*****************************************************************************
-//
-// This is the code that gets called when the processor receives an unexpected
-// interrupt. This simply enters an infinite loop, preserving the system state
-// for examination by a debugger.
-//
-//*****************************************************************************
-static void
-IntDefaultHandler(void)
-{
- //
- // Go into an infinite loop.
- //
- while(1)
- {
- }
-}
diff --git a/project0/startup_rvmdk.S b/project0/startup_rvmdk.S deleted file mode 100644 index 53d4dc9..0000000 --- a/project0/startup_rvmdk.S +++ /dev/null @@ -1,351 +0,0 @@ -; <<< Use Configuration Wizard in Context Menu >>>
-;******************************************************************************
-;
-; startup_rvmdk.S - Startup code for use with Keil's uVision.
-;
-; Copyright (c) 2012 Texas Instruments Incorporated. All rights reserved.
-; Software License Agreement
-;
-; Texas Instruments (TI) is supplying this software for use solely and
-; exclusively on TI's microcontroller products. The software is owned by
-; TI and/or its suppliers, and is protected under applicable copyright
-; laws. You may not combine this software with "viral" open-source
-; software in order to form a larger program.
-;
-; THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
-; NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
-; NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-; A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
-; CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
-; DAMAGES, FOR ANY REASON WHATSOEVER.
-;
-; This is part of revision 9453 of the EK-LM4F120XL Firmware Package.
-;
-;******************************************************************************
-
-;******************************************************************************
-;
-; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
-;
-;******************************************************************************
-Stack EQU 0x00000100
-
-;******************************************************************************
-;
-; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
-;
-;******************************************************************************
-Heap EQU 0x00000000
-
-;******************************************************************************
-;
-; Allocate space for the stack.
-;
-;******************************************************************************
- AREA STACK, NOINIT, READWRITE, ALIGN=3
-StackMem
- SPACE Stack
-__initial_sp
-
-;******************************************************************************
-;
-; Allocate space for the heap.
-;
-;******************************************************************************
- AREA HEAP, NOINIT, READWRITE, ALIGN=3
-__heap_base
-HeapMem
- SPACE Heap
-__heap_limit
-
-;******************************************************************************
-;
-; Indicate that the code in this file preserves 8-byte alignment of the stack.
-;
-;******************************************************************************
- PRESERVE8
-
-;******************************************************************************
-;
-; Place code into the reset code section.
-;
-;******************************************************************************
- AREA RESET, CODE, READONLY
- THUMB
-
-;******************************************************************************
-;
-; The vector table.
-;
-;******************************************************************************
- EXPORT __Vectors
-__Vectors
- DCD StackMem + Stack ; Top of Stack
- DCD Reset_Handler ; Reset Handler
- DCD NmiSR ; NMI Handler
- DCD FaultISR ; Hard Fault Handler
- DCD IntDefaultHandler ; The MPU fault handler
- DCD IntDefaultHandler ; The bus fault handler
- DCD IntDefaultHandler ; The usage fault handler
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD IntDefaultHandler ; SVCall handler
- DCD IntDefaultHandler ; Debug monitor handler
- DCD 0 ; Reserved
- DCD IntDefaultHandler ; The PendSV handler
- DCD IntDefaultHandler ; The SysTick handler
- DCD IntDefaultHandler ; GPIO Port A
- DCD IntDefaultHandler ; GPIO Port B
- DCD IntDefaultHandler ; GPIO Port C
- DCD IntDefaultHandler ; GPIO Port D
- DCD IntDefaultHandler ; GPIO Port E
- DCD IntDefaultHandler ; UART0 Rx and Tx
- DCD IntDefaultHandler ; UART1 Rx and Tx
- DCD IntDefaultHandler ; SSI0 Rx and Tx
- DCD IntDefaultHandler ; I2C0 Master and Slave
- DCD IntDefaultHandler ; PWM Fault
- DCD IntDefaultHandler ; PWM Generator 0
- DCD IntDefaultHandler ; PWM Generator 1
- DCD IntDefaultHandler ; PWM Generator 2
- DCD IntDefaultHandler ; Quadrature Encoder 0
- DCD IntDefaultHandler ; ADC Sequence 0
- DCD IntDefaultHandler ; ADC Sequence 1
- DCD IntDefaultHandler ; ADC Sequence 2
- DCD IntDefaultHandler ; ADC Sequence 3
- DCD IntDefaultHandler ; Watchdog timer
- DCD IntDefaultHandler ; Timer 0 subtimer A
- DCD IntDefaultHandler ; Timer 0 subtimer B
- DCD IntDefaultHandler ; Timer 1 subtimer A
- DCD IntDefaultHandler ; Timer 1 subtimer B
- DCD IntDefaultHandler ; Timer 2 subtimer A
- DCD IntDefaultHandler ; Timer 2 subtimer B
- DCD IntDefaultHandler ; Analog Comparator 0
- DCD IntDefaultHandler ; Analog Comparator 1
- DCD IntDefaultHandler ; Analog Comparator 2
- DCD IntDefaultHandler ; System Control (PLL, OSC, BO)
- DCD IntDefaultHandler ; FLASH Control
- DCD IntDefaultHandler ; GPIO Port F
- DCD IntDefaultHandler ; GPIO Port G
- DCD IntDefaultHandler ; GPIO Port H
- DCD IntDefaultHandler ; UART2 Rx and Tx
- DCD IntDefaultHandler ; SSI1 Rx and Tx
- DCD IntDefaultHandler ; Timer 3 subtimer A
- DCD IntDefaultHandler ; Timer 3 subtimer B
- DCD IntDefaultHandler ; I2C1 Master and Slave
- DCD IntDefaultHandler ; Quadrature Encoder 1
- DCD IntDefaultHandler ; CAN0
- DCD IntDefaultHandler ; CAN1
- DCD IntDefaultHandler ; CAN2
- DCD IntDefaultHandler ; Ethernet
- DCD IntDefaultHandler ; Hibernate
- DCD IntDefaultHandler ; USB0
- DCD IntDefaultHandler ; PWM Generator 3
- DCD IntDefaultHandler ; uDMA Software Transfer
- DCD IntDefaultHandler ; uDMA Error
- DCD IntDefaultHandler ; ADC1 Sequence 0
- DCD IntDefaultHandler ; ADC1 Sequence 1
- DCD IntDefaultHandler ; ADC1 Sequence 2
- DCD IntDefaultHandler ; ADC1 Sequence 3
- DCD IntDefaultHandler ; I2S0
- DCD IntDefaultHandler ; External Bus Interface 0
- DCD IntDefaultHandler ; GPIO Port J
- DCD IntDefaultHandler ; GPIO Port K
- DCD IntDefaultHandler ; GPIO Port L
- DCD IntDefaultHandler ; SSI2 Rx and Tx
- DCD IntDefaultHandler ; SSI3 Rx and Tx
- DCD IntDefaultHandler ; UART3 Rx and Tx
- DCD IntDefaultHandler ; UART4 Rx and Tx
- DCD IntDefaultHandler ; UART5 Rx and Tx
- DCD IntDefaultHandler ; UART6 Rx and Tx
- DCD IntDefaultHandler ; UART7 Rx and Tx
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD IntDefaultHandler ; I2C2 Master and Slave
- DCD IntDefaultHandler ; I2C3 Master and Slave
- DCD IntDefaultHandler ; Timer 4 subtimer A
- DCD IntDefaultHandler ; Timer 4 subtimer B
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD IntDefaultHandler ; Timer 5 subtimer A
- DCD IntDefaultHandler ; Timer 5 subtimer B
- DCD IntDefaultHandler ; Wide Timer 0 subtimer A
- DCD IntDefaultHandler ; Wide Timer 0 subtimer B
- DCD IntDefaultHandler ; Wide Timer 1 subtimer A
- DCD IntDefaultHandler ; Wide Timer 1 subtimer B
- DCD IntDefaultHandler ; Wide Timer 2 subtimer A
- DCD IntDefaultHandler ; Wide Timer 2 subtimer B
- DCD IntDefaultHandler ; Wide Timer 3 subtimer A
- DCD IntDefaultHandler ; Wide Timer 3 subtimer B
- DCD IntDefaultHandler ; Wide Timer 4 subtimer A
- DCD IntDefaultHandler ; Wide Timer 4 subtimer B
- DCD IntDefaultHandler ; Wide Timer 5 subtimer A
- DCD IntDefaultHandler ; Wide Timer 5 subtimer B
- DCD IntDefaultHandler ; FPU
- DCD IntDefaultHandler ; PECI 0
- DCD IntDefaultHandler ; LPC 0
- DCD IntDefaultHandler ; I2C4 Master and Slave
- DCD IntDefaultHandler ; I2C5 Master and Slave
- DCD IntDefaultHandler ; GPIO Port M
- DCD IntDefaultHandler ; GPIO Port N
- DCD IntDefaultHandler ; Quadrature Encoder 2
- DCD IntDefaultHandler ; Fan 0
- DCD 0 ; Reserved
- DCD IntDefaultHandler ; GPIO Port P (Summary or P0)
- DCD IntDefaultHandler ; GPIO Port P1
- DCD IntDefaultHandler ; GPIO Port P2
- DCD IntDefaultHandler ; GPIO Port P3
- DCD IntDefaultHandler ; GPIO Port P4
- DCD IntDefaultHandler ; GPIO Port P5
- DCD IntDefaultHandler ; GPIO Port P6
- DCD IntDefaultHandler ; GPIO Port P7
- DCD IntDefaultHandler ; GPIO Port Q (Summary or Q0)
- DCD IntDefaultHandler ; GPIO Port Q1
- DCD IntDefaultHandler ; GPIO Port Q2
- DCD IntDefaultHandler ; GPIO Port Q3
- DCD IntDefaultHandler ; GPIO Port Q4
- DCD IntDefaultHandler ; GPIO Port Q5
- DCD IntDefaultHandler ; GPIO Port Q6
- DCD IntDefaultHandler ; GPIO Port Q7
- DCD IntDefaultHandler ; GPIO Port R
- DCD IntDefaultHandler ; GPIO Port S
- DCD IntDefaultHandler ; PWM 1 Generator 0
- DCD IntDefaultHandler ; PWM 1 Generator 1
- DCD IntDefaultHandler ; PWM 1 Generator 2
- DCD IntDefaultHandler ; PWM 1 Generator 3
- DCD IntDefaultHandler ; PWM 1 Fault
-
-;******************************************************************************
-;
-; This is the code that gets called when the processor first starts execution
-; following a reset event.
-;
-;******************************************************************************
- EXPORT Reset_Handler
-Reset_Handler
- ;
- ; Enable the floating-point unit. This must be done here to handle the
- ; case where main() uses floating-point and the function prologue saves
- ; floating-point registers (which will fault if floating-point is not
- ; enabled). Any configuration of the floating-point unit using
- ; DriverLib APIs must be done here prior to the floating-point unit
- ; being enabled.
- ;
- ; Note that this does not use DriverLib since it might not be included
- ; in this project.
- ;
- MOVW R0, #0xED88
- MOVT R0, #0xE000
- LDR R1, [R0]
- ORR R1, #0x00F00000
- STR R1, [R0]
-
- ;
- ; Call the C library enty point that handles startup. This will copy
- ; the .data section initializers from flash to SRAM and zero fill the
- ; .bss section.
- ;
- IMPORT __main
- B __main
-
-;******************************************************************************
-;
-; This is the code that gets called when the processor receives a NMI. This
-; simply enters an infinite loop, preserving the system state for examination
-; by a debugger.
-;
-;******************************************************************************
-NmiSR
- B NmiSR
-
-;******************************************************************************
-;
-; This is the code that gets called when the processor receives a fault
-; interrupt. This simply enters an infinite loop, preserving the system state
-; for examination by a debugger.
-;
-;******************************************************************************
-FaultISR
- B FaultISR
-
-;******************************************************************************
-;
-; This is the code that gets called when the processor receives an unexpected
-; interrupt. This simply enters an infinite loop, preserving the system state
-; for examination by a debugger.
-;
-;******************************************************************************
-IntDefaultHandler
- B IntDefaultHandler
-
-;******************************************************************************
-;
-; Make sure the end of this section is aligned.
-;
-;******************************************************************************
- ALIGN
-
-;******************************************************************************
-;
-; Some code in the normal code section for initializing the heap and stack.
-;
-;******************************************************************************
- AREA |.text|, CODE, READONLY
-
-;******************************************************************************
-;
-; The function expected of the C library startup code for defining the stack
-; and heap memory locations. For the C library version of the startup code,
-; provide this function so that the C library initialization code can find out
-; the location of the stack and heap.
-;
-;******************************************************************************
- IF :DEF: __MICROLIB
- EXPORT __initial_sp
- EXPORT __heap_base
- EXPORT __heap_limit
- ELSE
- IMPORT __use_two_region_memory
- EXPORT __user_initial_stackheap
-__user_initial_stackheap
- LDR R0, =HeapMem
- LDR R1, =(StackMem + Stack)
- LDR R2, =(HeapMem + Heap)
- LDR R3, =StackMem
- BX LR
- ENDIF
-
-;******************************************************************************
-;
-; Make sure the end of this section is aligned.
-;
-;******************************************************************************
- ALIGN
-
-;******************************************************************************
-;
-; Tell the assembler that we're done.
-;
-;******************************************************************************
- END
diff --git a/project0/startup_sourcerygxx.S b/project0/startup_sourcerygxx.S deleted file mode 100644 index b720839..0000000 --- a/project0/startup_sourcerygxx.S +++ /dev/null @@ -1,75 +0,0 @@ -//*****************************************************************************
-//
-// startup_sourcerygxx.S - Startup code for Sourcery CodeBench.
-//
-// Copyright (c) 2012 Texas Instruments Incorporated. All rights reserved.
-// Software License Agreement
-//
-// Texas Instruments (TI) is supplying this software for use solely and
-// exclusively on TI's microcontroller products. The software is owned by
-// TI and/or its suppliers, and is protected under applicable copyright
-// laws. You may not combine this software with "viral" open-source
-// software in order to form a larger program.
-//
-// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
-// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
-// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
-// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
-// DAMAGES, FOR ANY REASON WHATSOEVER.
-//
-// This is part of revision 9453 of the EK-LM4F120XL Firmware Package.
-//
-//*****************************************************************************
-
- .syntax unified
- .thumb
-
-//*****************************************************************************
-//
-// Place this code into the .cs3.reset section so that it can be executed prior
-// to the startup code in Sourcery CodeBench.
-//
-//*****************************************************************************
- .section .cs3.reset,"x"
-
-//*****************************************************************************
-//
-// The reset handler, which overrides the one provided by CS3.
-//
-//*****************************************************************************
- .globl __cs3_reset
- .thumb_func
-__cs3_reset:
- //
- // Enable the floating-point unit. This must be done here to handle the
- // case where main() uses floating-point and the function prologue saves
- // floating-point registers (which will fault if floating-point is not
- // enabled). Any configuration of the floating-point unit using DriverLib
- // APIs must be done here prior to the floating-point unit being enabled.
- //
- // Note that this does not use DriverLib since it might not be included in
- // this project.
- //
- movw r0, #0xed88
- movt r0, #0xe000
- ldr r1, [r0]
- orr r1, #0x00f00000
- str r1, [r0]
-
- //
- // Branch to the normal CS3 startup code.
- //
- .extern __cs3_reset_ekc_lm4f232
- ldr r0, =__cs3_reset_ekc_lm4f232
- bx r0
-
- //
- // Place the literal pool here.
- //
- .ltorg
-
- //
- // The end of the file.
- //
- .end
|