diff options
Diffstat (limited to 'include/linux/battery/fuelgauge/dummy_fuelgauge.h')
| -rw-r--r-- | include/linux/battery/fuelgauge/dummy_fuelgauge.h | 312 |
1 files changed, 312 insertions, 0 deletions
diff --git a/include/linux/battery/fuelgauge/dummy_fuelgauge.h b/include/linux/battery/fuelgauge/dummy_fuelgauge.h new file mode 100644 index 00000000..41b92e68 --- /dev/null +++ b/include/linux/battery/fuelgauge/dummy_fuelgauge.h @@ -0,0 +1,312 @@ +/* + * Copyright (C) 2011 STMicroelectronics. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __STC3115_BATTERY_H_ +#define __STC3115_BATTERY_H_ + +#include <linux/android_alarm.h> + +#define GG_VERSION "2.00a" + +/*Function declaration*/ +int STC31xx_SetPowerSavingMode(void); +int STC31xx_StopPowerSavingMode(void); +int STC31xx_AlarmSet(void); +int STC31xx_AlarmStop(void); +int STC31xx_AlarmGet(void); +int STC31xx_AlarmClear(void); +int STC31xx_AlarmSetVoltageThreshold(int VoltThresh); +int STC31xx_AlarmSetSOCThreshold(int SOCThresh); +int STC31xx_RelaxTmrSet(int CurrentThreshold); + +extern int MainTrim(struct i2c_client *client); +/* ******************************************************************************** */ +/* STC311x DEVICE SELECTION */ +/* STC3115 version only */ +/* -------------------------------------------------------------------------------- */ +#define STC3115 +#define BATD_UC8 +/* ******************************************************************************** */ + + +/* Private define ------------------------------------------------------------*/ + + +/* ******************************************************************************** */ +/* SPECIAL FUNCTIONS */ +/* -------------------------------------------------------------------------------- */ +/* */ +/* define TEMPCOMP_SOC to enable SOC temperature compensation */ +#define TEMPCOMP_SOC + +/* ******************************************************************************** */ + + +/* ******************************************************************************** */ +/* INTERNAL PARAMETERS */ +/* TO BE ADJUSTED ACCORDING TO BATTERY/APPLICATION CHARACTERISTICS */ +/* -------------------------------------------------------------------------------- */ +/* */ +#define BATT_CHG_VOLTAGE 4250 /* min voltage at the end of the charge (mV) */ +#define BATT_MIN_VOLTAGE 3300 /* nearly empty battery detection level (mV) */ +#define MAX_HRSOC 51200 /* 100% in 1/512% units*/ +#define MAX_SOC 1000 /* 100% in 0.1% units */ +/* */ +#define CHG_MIN_CURRENT 200 /* min charge current in mA */ +#define CHG_END_CURRENT 20 /* end charge current in mA */ +#define APP_MIN_CURRENT (-5) /* minimum application current consumption in mA ( <0 !) */ +#define APP_MIN_VOLTAGE 3000 /* application cut-off voltage */ +#define TEMP_MIN_ADJ (-5) /* minimum temperature for gain adjustment */ + +#define VMTEMPTABLE { 85, 90, 100, 160, 320, 440, 840 } /* normalized VM_CNF at 60, 40, 25, 10, 0, -10C, -20C */ + +#define AVGFILTER 4 /* average filter constant */ + +/* ******************************************************************************** */ + +/* Private define ------------------------------------------------------------*/ + +#define STC31xx_SLAVE_ADDRESS 0xE0 /* STC31xx 8-bit address byte */ + +/*Address of the STC311x register --------------------------------------------*/ +#define STC311x_REG_MODE 0x00 /* Mode Register */ +#define STC311x_REG_CTRL 0x01 /* Control and Status Register */ +#define STC311x_REG_SOC 0x02 /* SOC Data (2 bytes) */ +#define STC311x REG_COUNTER 0x04 /* Number of Conversion (2 bytes) */ +#define STC311x_REG_CURRENT 0x06 /* Battery Current (2 bytes) */ +#define STC311x_REG_VOLTAGE 0x08 /* Battery Voltage (2 bytes) */ +#define STC311x_REG_TEMPERATURE 0x0A /* Temperature */ +#define STC311x_REG_CC_ADJ_HIGH 0x0B /* CC adjustement */ +#define STC311x_REG_VM_ADJ_HIGH 0x0C /* VM adjustement */ +#define STC311x_REG_CC_ADJ_LOW 0x19 /* CC adjustement */ +#define STC311x_REG_VM_ADJ_LOW 0x1A /* VM adjustement */ +#define STC311x_ACC_CC_ADJ_HIGH 0x1B /* CC accumulator */ +#define STC311x_ACC_CC_ADJ_LOW 0x1C /* CC accumulator */ +#define STC311x_ACC_VM_ADJ_HIGH 0x1D /* VM accumulator */ +#define STC311x_ACC_VM_ADJ_LOW 0x1E /* VM accumulator */ +#define STC311x_REG_OCV 0x0D /* Battery OCV (2 bytes) */ +#define STC311x_REG_CC_CNF 0x0F /* CC configuration (2 bytes) */ +#define STC311x_REG_VM_CNF 0x11 /* VM configuration (2 bytes) */ +#define STC311x_REG_ALARM_SOC 0x13 /* SOC alarm level */ +#define STC311x_REG_ALARM_VOLTAGE 0x14 /* Low voltage alarm level */ +#define STC311x_REG_CURRENT_THRES 0x15 /* Current threshold for relaxation */ +#define STC311x_REG_RELAX_COUNT 0x16 /* Voltage relaxation counter */ +#define STC311x_REG_RELAX_MAX 0x17 /* Voltage relaxation max count */ + +/*Bit mask definition*/ +#define STC311x_VMODE 0x01 /* Voltage mode bit mask */ +#define STC311x_ALM_ENA 0x08 /* Alarm enable bit mask */ +#define STC311x_GG_RUN 0x10 /* Alarm enable bit mask */ +#define STC311x_FORCE_CC 0x20 /* Force CC bit mask */ +#define STC311x_FORCE_VM 0x40 /* Force VM bit mask */ +#define STC311x_SOFTPOR 0x11 /* soft reset */ +#define STC311x_CLR_VM_ADJ 0x02 /* Clear VM ADJ register bit mask */ +#define STC311x_CLR_CC_ADJ 0x04 /* Clear CC ADJ register bit mask */ + +#define STC311x_REG_ID 0x18 /* Chip ID (1 byte) */ +#define STC311x_ID 0x13 /* STC3115 ID */ +#define STC311x_ID_2 0x14 /* STC3115 ID */ + +#define STC311x_REG_RAM 0x20 /* General Purpose RAM Registers */ +#define RAM_SIZE 16 /* Total RAM size of STC3115 in bytes */ + +#define STC311x_REG_OCVTAB 0x30 +#define OCVTAB_SIZE 16 /* OCVTAB size of STC3115 in bytes */ + +#define VCOUNT 4 /* counter value for 1st current/temp measurements */ + + +#define M_STAT 0x1010 /* GG_RUN & PORDET mask in STC311x_BattDataTypeDef status word */ +#define M_RST 0x1800 /* BATFAIL & PORDET mask */ +#define M_RUN 0x0010 /* GG_RUN mask in STC311x_BattDataTypeDef status word */ +#define M_GGVM 0x0400 /* GG_VM mask */ +#define M_BATFAIL 0x0800 /* BATFAIL mask*/ +#define M_VMOD 0x0001 /* VMODE mask */ + +#define OK 0 + +/* STC311x RAM test word */ +#define RAM_TSTWORD 0x53A9 + +/* Gas gauge states */ +#define GG_INIT 'I' +#define GG_RUNNING 'R' +#define GG_POWERDN 'D' + +#define VM_MODE 1 +#define CC_MODE 0 + +#define STC311x_VF_BATTERY_ON 200 +#define STC311x_VF_BATTERY_OFF 0 + +/* gas gauge structure definition ------------------------------------*/ + +#define NTEMP 7 +static const int TempTable[NTEMP] = {60, 40, 25, 10, 0, -10, -20} ; /* temperature table from 60C to -20C (descending order!) */ +static const int DefVMTempTable[NTEMP] = VMTEMPTABLE; + +/* Private variables ---------------------------------------------------------*/ + +/* #define CurrentFactor (24084/SENSERESISTOR) LSB=5.88uV/R= ~24084/R/4096 - convert to mA */ +#define VoltageFactor 9011 /* LSB=2.20mV ~9011/4096 - convert to mV */ + + +/* structure of the STC311x battery monitoring parameters */ +typedef struct { + int Voltage; /* battery voltage in mV */ + int Current; /* battery current in mA */ + int Temperature; /* battery temperature in 0.1C */ + int SOC; /* battery relative SOC (%) in 0.1% */ + int OCV; + int AvgSOC; + int AvgCurrent; + int AvgVoltage; + int AvgTemperature; + int ChargeValue; /* remaining capacity in mAh */ + int RemTime; /* battery remaining operating time during discharge (min) */ + int State; /* charge (>0)/discharge(<0) state */ + int CalStat; /* Internal status */ + /* -- parameters -- */ + int Vmode; /* 1=Voltage mode, 0=mixed mode */ + int Alm_SOC; /* SOC alm level */ + int Alm_Vbat; /* Vbat alm level */ + int CC_cnf; /* nominal CC_cnf */ + int VM_cnf; /* nominal VM cnf */ + int Cnom; /* nominal capacity in mAh */ + int Rsense; /* sense resistor */ + int RelaxCurrent; /* current for relaxation (< C/20) */ + int Adaptive; /* adaptive mode */ + int CapDerating[6]; /* capacity derating in 0.1%, for temp = 60, 40, 25, 10, 0, -10 C */ + int OCVOffset[16]; /* OCV curve adjustment */ + int OCVOffset2[16]; /* OCV curve adjustment */ + int ExternalTemperature; + int ForceExternalTemperature; +} GasGauge_DataTypeDef; + +/* structure of the STC311x battery monitoring data */ +typedef struct { + /* STC311x data */ + int STC_Status; /* status word */ + int Vmode; /* 1=Voltage mode, 0=mixed mode */ + int Voltage; /* voltage in mV */ + int Current; /* current in mA */ + int Temperature; /* temperature in 0.1C */ + int HRSOC; /* uncompensated SOC in 1/512% */ + int OCV; /* OCV in mV*/ + int ConvCounter; /* convertion counter */ + int RelaxTimer; /* current relax timer value */ + int CC_adj; /* CC adj */ + int VM_adj; /* VM adj */ + /* results & internals */ + int SOC; /* compensated SOC in 0.1% */ + int AvgSOC; /* in 0.1% */ + int AvgVoltage; + int AvgCurrent; + int AvgTemperature; + int AccSOC; + int AccVoltage; + int AccCurrent; + int AccTemperature; + int BattState; + int GG_Mode; /* 1=VM active, 0=CC active */ + int LastMode; + int LastSOC; + int LastTemperature; + int BattOnline; // BATD + int IDCode; + /* parameters */ + int Alm_SOC; /* SOC alm level in % */ + int Alm_Vbat; /* Vbat alm level in mV */ + int CC_cnf; /* nominal CC_cnf */ + int VM_cnf; /* nominal VM cnf */ + int Cnom; /* nominal capacity is mAh */ + int Rsense; /* sense resistor in milliOhms */ + int CurrentFactor; + int RelaxThreshold; /* current threshold for VM (mA) */ + int Adaptive; /* adaptive mode */ + int VM_TempTable[NTEMP]; + int CapacityDerating[NTEMP]; + char OCVOffset[OCVTAB_SIZE]; + char OCVOffset2[OCVTAB_SIZE]; +} STC311x_BattDataTypeDef; + +static STC311x_BattDataTypeDef BattData; /* STC311x data */ + +/* structure of the STC311x RAM registers for the Gas Gauge algorithm data */ +static union { + unsigned char db[RAM_SIZE]; /* last byte holds the CRC */ + struct { + short int TstWord; /* 0-1 */ + short int HRSOC; /* 2-3 SOC backup */ + short int CC_cnf; /* 4-5 current CC_cnf */ + short int VM_cnf; /* 6-7 current VM_cnf */ + char SOC; /* 8 SOC for trace (in %) */ + char GG_Status; /* 9 */ + /* bytes ..RAM_SIZE-2 are free, last byte RAM_SIZE-1 is the CRC */ + } reg; +} GG_Ram; + +int Capacity_Adjust; + +/* -------------------------------------------------------------------------------- */ +/* INTERNAL ANDROID DRIVER PARAMETERS */ +/* TO BE ADJUSTED ACCORDING TO BATTERY/APPLICATION CHARACTERISTICS */ +/* -------------------------------------------------------------------------------- */ + +#define STC3100_BATTERY_FULL 95 +#define STC311x_DELAY 1000 + +/* ******************************************************************************** */ + +/* ******************************************************************************** */ + +static struct i2c_client *sav_client; + +struct stc311x_chip { + struct i2c_client *client; + struct delayed_work work; + struct power_supply battery; + struct stc311x_platform_data *pdata; + + /* State Of Connect */ + int online; + /* battery SOC (capacity) */ + int batt_soc; + /* battery voltage */ + int batt_voltage; + /* Current */ + int batt_current; + /* State Of Charge */ + int status; + +}; + +struct sec_fg_info { + int (*battery_online)(void); + int (*charger_online)(void); + int (*charger_enable)(void); + int (*power_supply_register)(struct device *parent, struct power_supply *psy); + void (*power_supply_unregister)(struct power_supply *psy); + + int Vmode; /* 1=Voltage mode, 0=mixed mode */ + int Alm_SOC; /* SOC alm level %*/ + int Alm_Vbat; /* Vbat alm level mV*/ + int CC_cnf; /* nominal CC_cnf */ + int VM_cnf; /* nominal VM cnf */ + int Cnom; /* nominal capacity in mAh */ + int Rsense; /* sense resistor mOhms*/ + int RelaxCurrent; /* current for relaxation in mA (< C/20) */ + int Adaptive; /* 1=Adaptive mode enabled, 0=Adaptive mode disabled */ + int CapDerating[7]; /* capacity derating in 0.1%, for temp = 60, 40, 25, 10, 0, -10 °C,-20°C */ + int OCVOffset[16]; /* OCV curve adjustment */ + int OCVOffset2[16]; /* OCV curve adjustment */ + int (*ExternalTemperature) (void); /*External temperature fonction, return °C*/ + int ForceExternalTemperature; /* 1=External temperature, 0=STC3115 temperature */ +}; + +#endif |