diff options
Diffstat (limited to 'drivers/usb/gadget/dwc_otg/dwc_otg_cil.h')
| -rw-r--r-- | drivers/usb/gadget/dwc_otg/dwc_otg_cil.h | 1498 |
1 files changed, 1498 insertions, 0 deletions
diff --git a/drivers/usb/gadget/dwc_otg/dwc_otg_cil.h b/drivers/usb/gadget/dwc_otg/dwc_otg_cil.h new file mode 100644 index 00000000..f3dfa804 --- /dev/null +++ b/drivers/usb/gadget/dwc_otg/dwc_otg_cil.h @@ -0,0 +1,1498 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.h $ + * $Revision: #123 $ + * $Date: 2012/08/10 $ + * $Change: 2047372 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ + +#if !defined(__DWC_CIL_H__) +#define __DWC_CIL_H__ + +#include <linux/scatterlist.h> +#include "dwc_list.h" +#include "dwc_otg_dbg.h" +#include "dwc_otg_regs.h" + +#include "dwc_otg_core_if.h" +#include "dwc_otg_adp.h" + +/** + * @file + * This file contains the interface to the Core Interface Layer. + */ + +#ifdef DWC_UTE_CFI + +#define MAX_DMA_DESCS_PER_EP 256 + +/** + * Enumeration for the data buffer mode + */ +typedef enum _data_buffer_mode { + BM_STANDARD = 0, /* data buffer is in normal mode */ + BM_SG = 1, /* data buffer uses the scatter/gather mode */ + BM_CONCAT = 2, /* data buffer uses the concatenation mode */ + BM_CIRCULAR = 3, /* data buffer uses the circular DMA mode */ + BM_ALIGN = 4 /* data buffer is in buffer alignment mode */ +} data_buffer_mode_e; +#endif //DWC_UTE_CFI + +/** Macros defined for DWC OTG HW Release version */ + +#define OTG_CORE_REV_2_60a 0x4F54260A +#define OTG_CORE_REV_2_71a 0x4F54271A +#define OTG_CORE_REV_2_72a 0x4F54272A +#define OTG_CORE_REV_2_80a 0x4F54280A +#define OTG_CORE_REV_2_81a 0x4F54281A +#define OTG_CORE_REV_2_90a 0x4F54290A +#define OTG_CORE_REV_2_91a 0x4F54291A +#define OTG_CORE_REV_2_92a 0x4F54292A +#define OTG_CORE_REV_2_93a 0x4F54293A +#define OTG_CORE_REV_2_94a 0x4F54294A +#define OTG_CORE_REV_3_00a 0x4F54300A + +/** + * Information for each ISOC packet. + */ +typedef struct iso_pkt_info { + uint32_t offset; + uint32_t length; + int32_t status; +} iso_pkt_info_t; + +/** + * The <code>dwc_ep</code> structure represents the state of a single + * endpoint when acting in device mode. It contains the data items + * needed for an endpoint to be activated and transfer packets. + */ +typedef struct dwc_ep { + /** EP number used for register address lookup */ + uint8_t num; + /** EP direction 0 = OUT */ + unsigned is_in:1; + /** EP active. */ + unsigned active:1; + + /** + * Periodic Tx FIFO # for IN EPs For INTR EP set to 0 to use non-periodic + * Tx FIFO. If dedicated Tx FIFOs are enabled Tx FIFO # FOR IN EPs*/ + unsigned tx_fifo_num:4; + /** EP type: 0 - Control, 1 - ISOC, 2 - BULK, 3 - INTR */ + unsigned type:2; +#define DWC_OTG_EP_TYPE_CONTROL 0 +#define DWC_OTG_EP_TYPE_ISOC 1 +#define DWC_OTG_EP_TYPE_BULK 2 +#define DWC_OTG_EP_TYPE_INTR 3 + + /** DATA start PID for INTR and BULK EP */ + unsigned data_pid_start:1; + /** Frame (even/odd) for ISOC EP */ + unsigned even_odd_frame:1; + /** Max Packet bytes */ + unsigned maxpacket:11; + + /** Max Transfer size */ + uint32_t maxxfer; + + /** @name Transfer state */ + /** @{ */ + + /** + * Pointer to the beginning of the transfer buffer -- do not modify + * during transfer. + */ + + dwc_dma_t dma_addr; + + dwc_dma_t dma_desc_addr; + dwc_otg_dev_dma_desc_t *desc_addr; + + uint8_t *start_xfer_buff; + /** pointer to the transfer buffer */ + uint8_t *xfer_buff; + /** Number of bytes to transfer */ + unsigned xfer_len:19; + /** Number of bytes transferred. */ + unsigned xfer_count:19; + /** Sent ZLP */ + unsigned sent_zlp:1; + /** Total len for control transfer */ + unsigned total_len:19; + + /** stall clear flag */ + unsigned stall_clear_flag:1; + + /** SETUP pkt cnt rollover flag for EP0 out*/ + unsigned stp_rollover; + +#ifdef DWC_UTE_CFI + /* The buffer mode */ + data_buffer_mode_e buff_mode; + + /* The chain of DMA descriptors. + * MAX_DMA_DESCS_PER_EP will be allocated for each active EP. + */ + dwc_otg_dma_desc_t *descs; + + /* The DMA address of the descriptors chain start */ + dma_addr_t descs_dma_addr; + /** This variable stores the length of the last enqueued request */ + uint32_t cfi_req_len; +#endif //DWC_UTE_CFI + +/** Max DMA Descriptor count for any EP */ +#define MAX_DMA_DESC_CNT 256 + /** Allocated DMA Desc count */ + uint32_t desc_cnt; + + /** bInterval */ + uint32_t bInterval; + /** Next frame num to setup next ISOC transfer */ + uint32_t frame_num; + /** Indicates SOF number overrun in DSTS */ + uint8_t frm_overrun; + +#ifdef DWC_UTE_PER_IO + /** Next frame num for which will be setup DMA Desc */ + uint32_t xiso_frame_num; + /** bInterval */ + uint32_t xiso_bInterval; + /** Count of currently active transfers - shall be either 0 or 1 */ + int xiso_active_xfers; + int xiso_queued_xfers; +#endif +#ifdef DWC_EN_ISOC + /** + * Variables specific for ISOC EPs + * + */ + /** DMA addresses of ISOC buffers */ + dwc_dma_t dma_addr0; + dwc_dma_t dma_addr1; + + dwc_dma_t iso_dma_desc_addr; + dwc_otg_dev_dma_desc_t *iso_desc_addr; + + /** pointer to the transfer buffers */ + uint8_t *xfer_buff0; + uint8_t *xfer_buff1; + + /** number of ISOC Buffer is processing */ + uint32_t proc_buf_num; + /** Interval of ISOC Buffer processing */ + uint32_t buf_proc_intrvl; + /** Data size for regular frame */ + uint32_t data_per_frame; + + /* todo - pattern data support is to be implemented in the future */ + /** Data size for pattern frame */ + uint32_t data_pattern_frame; + /** Frame number of pattern data */ + uint32_t sync_frame; + + /** bInterval */ + uint32_t bInterval; + /** ISO Packet number per frame */ + uint32_t pkt_per_frm; + /** Next frame num for which will be setup DMA Desc */ + uint32_t next_frame; + /** Number of packets per buffer processing */ + uint32_t pkt_cnt; + /** Info for all isoc packets */ + iso_pkt_info_t *pkt_info; + /** current pkt number */ + uint32_t cur_pkt; + /** current pkt number */ + uint8_t *cur_pkt_addr; + /** current pkt number */ + uint32_t cur_pkt_dma_addr; +#endif /* DWC_EN_ISOC */ + +/** @} */ +} dwc_ep_t; + +/* + * Reasons for halting a host channel. + */ +typedef enum dwc_otg_halt_status { + DWC_OTG_HC_XFER_NO_HALT_STATUS, + DWC_OTG_HC_XFER_COMPLETE, + DWC_OTG_HC_XFER_URB_COMPLETE, + DWC_OTG_HC_XFER_ACK, + DWC_OTG_HC_XFER_NAK, + DWC_OTG_HC_XFER_NYET, + DWC_OTG_HC_XFER_STALL, + DWC_OTG_HC_XFER_XACT_ERR, + DWC_OTG_HC_XFER_FRAME_OVERRUN, + DWC_OTG_HC_XFER_BABBLE_ERR, + DWC_OTG_HC_XFER_DATA_TOGGLE_ERR, + DWC_OTG_HC_XFER_AHB_ERR, + DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE, + DWC_OTG_HC_XFER_URB_DEQUEUE +} dwc_otg_halt_status_e; + +/** + * Host channel descriptor. This structure represents the state of a single + * host channel when acting in host mode. It contains the data items needed to + * transfer packets to an endpoint via a host channel. + */ +typedef struct dwc_hc { + /** Host channel number used for register address lookup */ + uint8_t hc_num; + + /** Device to access */ + unsigned dev_addr:7; + + /** EP to access */ + unsigned ep_num:4; + + /** EP direction. 0: OUT, 1: IN */ + unsigned ep_is_in:1; + + /** + * EP speed. + * One of the following values: + * - DWC_OTG_EP_SPEED_LOW + * - DWC_OTG_EP_SPEED_FULL + * - DWC_OTG_EP_SPEED_HIGH + */ + unsigned speed:2; +#define DWC_OTG_EP_SPEED_LOW 0 +#define DWC_OTG_EP_SPEED_FULL 1 +#define DWC_OTG_EP_SPEED_HIGH 2 + + /** + * Endpoint type. + * One of the following values: + * - DWC_OTG_EP_TYPE_CONTROL: 0 + * - DWC_OTG_EP_TYPE_ISOC: 1 + * - DWC_OTG_EP_TYPE_BULK: 2 + * - DWC_OTG_EP_TYPE_INTR: 3 + */ + unsigned ep_type:2; + + /** Max packet size in bytes */ + unsigned max_packet:11; + + /** + * PID for initial transaction. + * 0: DATA0,<br> + * 1: DATA2,<br> + * 2: DATA1,<br> + * 3: MDATA (non-Control EP), + * SETUP (Control EP) + */ + unsigned data_pid_start:2; +#define DWC_OTG_HC_PID_DATA0 0 +#define DWC_OTG_HC_PID_DATA2 1 +#define DWC_OTG_HC_PID_DATA1 2 +#define DWC_OTG_HC_PID_MDATA 3 +#define DWC_OTG_HC_PID_SETUP 3 + + /** Number of periodic transactions per (micro)frame */ + unsigned multi_count:2; + + /** @name Transfer State */ + /** @{ */ + + /** Pointer to the current transfer buffer position. */ + uint8_t *xfer_buff; + /** + * In Buffer DMA mode this buffer will be used + * if xfer_buff is not DWORD aligned. + */ + dwc_dma_t align_buff; + /** Total number of bytes to transfer. */ + uint32_t xfer_len; + /** Number of bytes transferred so far. */ + uint32_t xfer_count; + /** Packet count at start of transfer.*/ + uint16_t start_pkt_count; + + /** + * Flag to indicate whether the transfer has been started. Set to 1 if + * it has been started, 0 otherwise. + */ + uint8_t xfer_started; + + /** + * Set to 1 to indicate that a PING request should be issued on this + * channel. If 0, process normally. + */ + uint8_t do_ping; + + /** + * Set to 1 to indicate that the error count for this transaction is + * non-zero. Set to 0 if the error count is 0. + */ + uint8_t error_state; + + /** + * Set to 1 to indicate that this channel should be halted the next + * time a request is queued for the channel. This is necessary in + * slave mode if no request queue space is available when an attempt + * is made to halt the channel. + */ + uint8_t halt_on_queue; + + /** + * Set to 1 if the host channel has been halted, but the core is not + * finished flushing queued requests. Otherwise 0. + */ + uint8_t halt_pending; + + /** + * Reason for halting the host channel. + */ + dwc_otg_halt_status_e halt_status; + + /* + * Split settings for the host channel + */ + uint8_t do_split; /**< Enable split for the channel */ + uint8_t complete_split; /**< Enable complete split */ + uint8_t hub_addr; /**< Address of high speed hub */ + + uint8_t port_addr; /**< Port of the low/full speed device */ + /** Split transaction position + * One of the following values: + * - DWC_HCSPLIT_XACTPOS_MID + * - DWC_HCSPLIT_XACTPOS_BEGIN + * - DWC_HCSPLIT_XACTPOS_END + * - DWC_HCSPLIT_XACTPOS_ALL */ + uint8_t xact_pos; + + /** Set when the host channel does a short read. */ + uint8_t short_read; + + /** + * Number of requests issued for this channel since it was assigned to + * the current transfer (not counting PINGs). + */ + uint8_t requests; + + /** + * Queue Head for the transfer being processed by this channel. + */ + struct dwc_otg_qh *qh; + + /** @} */ + + /** Entry in list of host channels. */ + DWC_CIRCLEQ_ENTRY(dwc_hc) hc_list_entry; + + /** @name Descriptor DMA support */ + /** @{ */ + + /** Number of Transfer Descriptors */ + uint16_t ntd; + + /** Descriptor List DMA address */ + dwc_dma_t desc_list_addr; + + /** Scheduling micro-frame bitmap. */ + uint8_t schinfo; + + /** @} */ +} dwc_hc_t; + +/** + * The following parameters may be specified when starting the module. These + * parameters define how the DWC_otg controller should be configured. + */ +typedef struct dwc_otg_core_params { + int32_t opt; + + /** + * Specifies the OTG capabilities. The driver will automatically + * detect the value for this parameter if none is specified. + * 0 - HNP and SRP capable (default) + * 1 - SRP Only capable + * 2 - No HNP/SRP capable + */ + int32_t otg_cap; + + /** + * Specifies whether to use slave or DMA mode for accessing the data + * FIFOs. The driver will automatically detect the value for this + * parameter if none is specified. + * 0 - Slave + * 1 - DMA (default, if available) + */ + int32_t dma_enable; + + /** + * When DMA mode is enabled specifies whether to use address DMA or DMA + * Descriptor mode for accessing the data FIFOs in device mode. The driver + * will automatically detect the value for this if none is specified. + * 0 - address DMA + * 1 - DMA Descriptor(default, if available) + */ + int32_t dma_desc_enable; + /** The DMA Burst size (applicable only for External DMA + * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32) + */ + int32_t dma_burst_size; /* Translate this to GAHBCFG values */ + + /** + * Specifies the maximum speed of operation in host and device mode. + * The actual speed depends on the speed of the attached device and + * the value of phy_type. The actual speed depends on the speed of the + * attached device. + * 0 - High Speed (default) + * 1 - Full Speed + */ + int32_t speed; + /** Specifies whether low power mode is supported when attached + * to a Full Speed or Low Speed device in host mode. + * 0 - Don't support low power mode (default) + * 1 - Support low power mode + */ + int32_t host_support_fs_ls_low_power; + + /** Specifies the PHY clock rate in low power mode when connected to a + * Low Speed device in host mode. This parameter is applicable only if + * HOST_SUPPORT_FS_LS_LOW_POWER is enabled. If PHY_TYPE is set to FS + * then defaults to 6 MHZ otherwise 48 MHZ. + * + * 0 - 48 MHz + * 1 - 6 MHz + */ + int32_t host_ls_low_power_phy_clk; + + /** + * 0 - Use cC FIFO size parameters + * 1 - Allow dynamic FIFO sizing (default) + */ + int32_t enable_dynamic_fifo; + + /** Total number of 4-byte words in the data FIFO memory. This + * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic + * Tx FIFOs. + * 32 to 32768 (default 8192) + * Note: The total FIFO memory depth in the FPGA configuration is 8192. + */ + int32_t data_fifo_size; + + /** Number of 4-byte words in the Rx FIFO in device mode when dynamic + * FIFO sizing is enabled. + * 16 to 32768 (default 1064) + */ + int32_t dev_rx_fifo_size; + + /** Number of 4-byte words in the non-periodic Tx FIFO in device mode + * when dynamic FIFO sizing is enabled. + * 16 to 32768 (default 1024) + */ + int32_t dev_nperio_tx_fifo_size; + + /** Number of 4-byte words in each of the periodic Tx FIFOs in device + * mode when dynamic FIFO sizing is enabled. + * 4 to 768 (default 256) + */ + uint32_t dev_perio_tx_fifo_size[MAX_PERIO_FIFOS]; + + /** Number of 4-byte words in the Rx FIFO in host mode when dynamic + * FIFO sizing is enabled. + * 16 to 32768 (default 1024) + */ + int32_t host_rx_fifo_size; + + /** Number of 4-byte words in the non-periodic Tx FIFO in host mode + * when Dynamic FIFO sizing is enabled in the core. + * 16 to 32768 (default 1024) + */ + int32_t host_nperio_tx_fifo_size; + + /** Number of 4-byte words in the host periodic Tx FIFO when dynamic + * FIFO sizing is enabled. + * 16 to 32768 (default 1024) + */ + int32_t host_perio_tx_fifo_size; + + /** The maximum transfer size supported in bytes. + * 2047 to 65,535 (default 65,535) + */ + int32_t max_transfer_size; + + /** The maximum number of packets in a transfer. + * 15 to 511 (default 511) + */ + int32_t max_packet_count; + + /** The number of host channel registers to use. + * 1 to 16 (default 12) + * Note: The FPGA configuration supports a maximum of 12 host channels. + */ + int32_t host_channels; + + /** The number of endpoints in addition to EP0 available for device + * mode operations. + * 1 to 15 (default 6 IN and OUT) + * Note: The FPGA configuration supports a maximum of 6 IN and OUT + * endpoints in addition to EP0. + */ + int32_t dev_endpoints; + + /** + * Specifies the type of PHY interface to use. By default, the driver + * will automatically detect the phy_type. + * + * 0 - Full Speed PHY + * 1 - UTMI+ (default) + * 2 - ULPI + */ + int32_t phy_type; + + /** + * Specifies the UTMI+ Data Width. This parameter is + * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI + * PHY_TYPE, this parameter indicates the data width between + * the MAC and the ULPI Wrapper.) Also, this parameter is + * applicable only if the OTG_HSPHY_WIDTH cC parameter was set + * to "8 and 16 bits", meaning that the core has been + * configured to work at either data path width. + * + * 8 or 16 bits (default 16) + */ + int32_t phy_utmi_width; + + /** + * Specifies whether the ULPI operates at double or single + * data rate. This parameter is only applicable if PHY_TYPE is + * ULPI. + * + * 0 - single data rate ULPI interface with 8 bit wide data + * bus (default) + * 1 - double data rate ULPI interface with 4 bit wide data + * bus + */ + int32_t phy_ulpi_ddr; + + /** + * Specifies whether to use the internal or external supply to + * drive the vbus with a ULPI phy. + */ + int32_t phy_ulpi_ext_vbus; + + /** + * Specifies whether to use the I2Cinterface for full speed PHY. This + * parameter is only applicable if PHY_TYPE is FS. + * 0 - No (default) + * 1 - Yes + */ + int32_t i2c_enable; + + int32_t ulpi_fs_ls; + + int32_t ts_dline; + + /** + * Specifies whether dedicated transmit FIFOs are + * enabled for non periodic IN endpoints in device mode + * 0 - No + * 1 - Yes + */ + int32_t en_multiple_tx_fifo; + + /** Number of 4-byte words in each of the Tx FIFOs in device + * mode when dynamic FIFO sizing is enabled. + * 4 to 768 (default 256) + */ + uint32_t dev_tx_fifo_size[MAX_TX_FIFOS]; + + /** Thresholding enable flag- + * bit 0 - enable non-ISO Tx thresholding + * bit 1 - enable ISO Tx thresholding + * bit 2 - enable Rx thresholding + */ + uint32_t thr_ctl; + + /** Thresholding length for Tx + * FIFOs in 32 bit DWORDs + */ + uint32_t tx_thr_length; + + /** Thresholding length for Rx + * FIFOs in 32 bit DWORDs + */ + uint32_t rx_thr_length; + + /** + * Specifies whether LPM (Link Power Management) support is enabled + */ + int32_t lpm_enable; + + /** Per Transfer Interrupt + * mode enable flag + * 1 - Enabled + * 0 - Disabled + */ + int32_t pti_enable; + + /** Multi Processor Interrupt + * mode enable flag + * 1 - Enabled + * 0 - Disabled + */ + int32_t mpi_enable; + + /** IS_USB Capability + * 1 - Enabled + * 0 - Disabled + */ + int32_t ic_usb_cap; + + /** AHB Threshold Ratio + * 2'b00 AHB Threshold = MAC Threshold + * 2'b01 AHB Threshold = 1/2 MAC Threshold + * 2'b10 AHB Threshold = 1/4 MAC Threshold + * 2'b11 AHB Threshold = 1/8 MAC Threshold + */ + int32_t ahb_thr_ratio; + + /** ADP Support + * 1 - Enabled + * 0 - Disabled + */ + int32_t adp_supp_enable; + + /** HFIR Reload Control + * 0 - The HFIR cannot be reloaded dynamically. + * 1 - Allow dynamic reloading of the HFIR register during runtime. + */ + int32_t reload_ctl; + + /** DCFG: Enable device Out NAK + * 0 - The core does not set NAK after Bulk Out transfer complete. + * 1 - The core sets NAK after Bulk OUT transfer complete. + */ + int32_t dev_out_nak; + + /** DCFG: Enable Continue on BNA + * After receiving BNA interrupt the core disables the endpoint,when the + * endpoint is re-enabled by the application the core starts processing + * 0 - from the DOEPDMA descriptor + * 1 - from the descriptor which received the BNA. + */ + int32_t cont_on_bna; + + /** GAHBCFG: AHB Single Support + * This bit when programmed supports SINGLE transfers for remainder + * data in a transfer for DMA mode of operation. + * 0 - in this case the remainder data will be sent using INCR burst size. + * 1 - in this case the remainder data will be sent using SINGLE burst size. + */ + int32_t ahb_single; + + /** Core Power down mode + * 0 - No Power Down is enabled + * 1 - Reserved + * 2 - Complete Power Down (Hibernation) + */ + int32_t power_down; + + /** OTG revision supported + * 0 - OTG 1.3 revision + * 1 - OTG 2.0 revision + */ + int32_t otg_ver; + +} dwc_otg_core_params_t; + +#ifdef DEBUG +struct dwc_otg_core_if; +typedef struct hc_xfer_info { + struct dwc_otg_core_if *core_if; + dwc_hc_t *hc; +} hc_xfer_info_t; +#endif + +typedef struct ep_xfer_info { + struct dwc_otg_core_if *core_if; + dwc_ep_t *ep; + uint8_t state; +} ep_xfer_info_t; +/* + * Device States + */ +typedef enum dwc_otg_lx_state { + /** On state */ + DWC_OTG_L0, + /** LPM sleep state*/ + DWC_OTG_L1, + /** USB suspend state*/ + DWC_OTG_L2, + /** Off state*/ + DWC_OTG_L3 +} dwc_otg_lx_state_e; + +struct dwc_otg_global_regs_backup { + uint32_t gotgctl_local; + uint32_t gintmsk_local; + uint32_t gahbcfg_local; + uint32_t gusbcfg_local; + uint32_t grxfsiz_local; + uint32_t gnptxfsiz_local; +#ifdef CONFIG_USB_DWC_OTG_LPM + uint32_t glpmcfg_local; +#endif + uint32_t gi2cctl_local; + uint32_t hptxfsiz_local; + uint32_t pcgcctl_local; + uint32_t gdfifocfg_local; + uint32_t dtxfsiz_local[MAX_EPS_CHANNELS]; + uint32_t gpwrdn_local; + uint32_t xhib_pcgcctl; + uint32_t xhib_gpwrdn; +}; + +struct dwc_otg_host_regs_backup { + uint32_t hcfg_local; + uint32_t haintmsk_local; + uint32_t hcintmsk_local[MAX_EPS_CHANNELS]; + uint32_t hprt0_local; + uint32_t hfir_local; +}; + +struct dwc_otg_dev_regs_backup { + uint32_t dcfg; + uint32_t dctl; + uint32_t daintmsk; + uint32_t diepmsk; + uint32_t doepmsk; + uint32_t diepctl[MAX_EPS_CHANNELS]; + uint32_t dieptsiz[MAX_EPS_CHANNELS]; + uint32_t diepdma[MAX_EPS_CHANNELS]; +}; +/** + * The <code>dwc_otg_core_if</code> structure contains information needed to manage + * the DWC_otg controller acting in either host or device mode. It + * represents the programming view of the controller as a whole. + */ +struct dwc_otg_core_if { + /** Parameters that define how the core should be configured.*/ + dwc_otg_core_params_t *core_params; + + /** Core Global registers starting at offset 000h. */ + dwc_otg_core_global_regs_t *core_global_regs; + + /** Device-specific information */ + dwc_otg_dev_if_t *dev_if; + /** Host-specific information */ + dwc_otg_host_if_t *host_if; + + /** Value from SNPSID register */ + uint32_t snpsid; + + /* + * Set to 1 if the core PHY interface bits in USBCFG have been + * initialized. + */ + uint8_t phy_init_done; + + /* + * SRP Success flag, set by srp success interrupt in FS I2C mode + */ + uint8_t srp_success; + uint8_t srp_timer_started; + /** Timer for SRP. If it expires before SRP is successful + * clear the SRP. */ + dwc_timer_t *srp_timer; + +#ifdef DWC_DEV_SRPCAP + /* This timer is needed to power on the hibernated host core if SRP is not + * initiated on connected SRP capable device for limited period of time + */ + uint8_t pwron_timer_started; + dwc_timer_t *pwron_timer; +#endif + /* Common configuration information */ + /** Power and Clock Gating Control Register */ + volatile uint32_t *pcgcctl; +#define DWC_OTG_PCGCCTL_OFFSET 0xE00 + + /** Push/pop addresses for endpoints or host channels.*/ + uint32_t *data_fifo[MAX_EPS_CHANNELS]; +#define DWC_OTG_DATA_FIFO_OFFSET 0x1000 +#define DWC_OTG_DATA_FIFO_SIZE 0x1000 + + /** Total RAM for FIFOs (Bytes) */ + uint16_t total_fifo_size; + /** Size of Rx FIFO (Bytes) */ + uint16_t rx_fifo_size; + /** Size of Non-periodic Tx FIFO (Bytes) */ + uint16_t nperio_tx_fifo_size; + + /** 1 if DMA is enabled, 0 otherwise. */ + uint8_t dma_enable; + + /** 1 if DMA descriptor is enabled, 0 otherwise. */ + uint8_t dma_desc_enable; + + /** 1 if PTI Enhancement mode is enabled, 0 otherwise. */ + uint8_t pti_enh_enable; + + /** 1 if MPI Enhancement mode is enabled, 0 otherwise. */ + uint8_t multiproc_int_enable; + + /** 1 if dedicated Tx FIFOs are enabled, 0 otherwise. */ + uint8_t en_multiple_tx_fifo; + + /** Set to 1 if multiple packets of a high-bandwidth transfer is in + * process of being queued */ + uint8_t queuing_high_bandwidth; + + /** Hardware Configuration -- stored here for convenience.*/ + hwcfg1_data_t hwcfg1; + hwcfg2_data_t hwcfg2; + hwcfg3_data_t hwcfg3; + hwcfg4_data_t hwcfg4; + fifosize_data_t hptxfsiz; + + /** Host and Device Configuration -- stored here for convenience.*/ + hcfg_data_t hcfg; + dcfg_data_t dcfg; + + /** The operational State, during transations + * (a_host>>a_peripherial and b_device=>b_host) this may not + * match the core but allows the software to determine + * transitions. + */ + uint8_t op_state; + + /** + * Set to 1 if the HCD needs to be restarted on a session request + * interrupt. This is required if no connector ID status change has + * occurred since the HCD was last disconnected. + */ + uint8_t restart_hcd_on_session_req; + + /** HCD callbacks */ + /** A-Device is a_host */ +#define A_HOST (1) + /** A-Device is a_suspend */ +#define A_SUSPEND (2) + /** A-Device is a_peripherial */ +#define A_PERIPHERAL (3) + /** B-Device is operating as a Peripheral. */ +#define B_PERIPHERAL (4) + /** B-Device is operating as a Host. */ +#define B_HOST (5) + + /** HCD callbacks */ + struct dwc_otg_cil_callbacks *hcd_cb; + /** PCD callbacks */ + struct dwc_otg_cil_callbacks *pcd_cb; + + /** Device mode Periodic Tx FIFO Mask */ + uint32_t p_tx_msk; + /** Device mode Periodic Tx FIFO Mask */ + uint32_t tx_msk; + + /** Workqueue object used for handling several interrupts */ + dwc_workq_t *wq_otg; + + /** Timer object used for handling "Wakeup Detected" Interrupt */ + dwc_timer_t *wkp_timer; + /** This arrays used for debug purposes for DEV OUT NAK enhancement */ + uint32_t start_doeptsiz_val[MAX_EPS_CHANNELS]; + ep_xfer_info_t ep_xfer_info[MAX_EPS_CHANNELS]; + dwc_timer_t *ep_xfer_timer[MAX_EPS_CHANNELS]; +#ifdef DEBUG + uint32_t start_hcchar_val[MAX_EPS_CHANNELS]; + + hc_xfer_info_t hc_xfer_info[MAX_EPS_CHANNELS]; + dwc_timer_t *hc_xfer_timer[MAX_EPS_CHANNELS]; + + uint32_t hfnum_7_samples; + uint64_t hfnum_7_frrem_accum; + uint32_t hfnum_0_samples; + uint64_t hfnum_0_frrem_accum; + uint32_t hfnum_other_samples; + uint64_t hfnum_other_frrem_accum; +#endif + +#ifdef DWC_UTE_CFI + uint16_t pwron_rxfsiz; + uint16_t pwron_gnptxfsiz; + uint16_t pwron_txfsiz[15]; + + uint16_t init_rxfsiz; + uint16_t init_gnptxfsiz; + uint16_t init_txfsiz[15]; +#endif + + /** Lx state of device */ + dwc_otg_lx_state_e lx_state; + + /** Saved Core Global registers */ + struct dwc_otg_global_regs_backup *gr_backup; + /** Saved Host registers */ + struct dwc_otg_host_regs_backup *hr_backup; + /** Saved Device registers */ + struct dwc_otg_dev_regs_backup *dr_backup; + + /** Power Down Enable */ + uint32_t power_down; + + /** ADP support Enable */ + uint32_t adp_enable; + + /** ADP structure object */ + dwc_otg_adp_t adp; + + /** hibernation/suspend flag */ + int hibernation_suspend; + + /** Device mode extended hibernation flag */ + int xhib; + + /** OTG revision supported */ + uint32_t otg_ver; + + /** OTG status flag used for HNP polling */ + uint8_t otg_sts; + + /** Pointer to either hcd->lock or pcd->lock */ + dwc_spinlock_t *lock; + + /** Start predict NextEP based on Learning Queue if equal 1, + * also used as counter of disabled NP IN EP's */ + uint8_t start_predict; + + /** NextEp sequence, including EP0: nextep_seq[] = EP if non-periodic and + * active, 0xff otherwise */ + uint8_t nextep_seq[MAX_EPS_CHANNELS]; + + /** Index of fisrt EP in nextep_seq array which should be re-enabled **/ + uint8_t first_in_nextep_seq; + + /** Frame number while entering to ISR - needed for ISOCs **/ + uint32_t frame_num; + +}; + +/** DWC_otg request structure. + * This structure is a list of requests. + */ + +typedef struct dwc_otg_pcd_request { + void *priv; + void *buf; + dwc_dma_t dma; + uint32_t num_mapped_sgs; + struct scatterlist *sg; + uint32_t length; + uint32_t actual; + + unsigned short_packet:1; + unsigned sent_zlp:1; + unsigned mapped;//for DMA transfer lee + /** + * Used instead of original buffer if + * it(physical address) is not dword-aligned. + **/ + uint8_t *dw_align_buf; + dwc_dma_t dw_align_buf_dma; + + DWC_CIRCLEQ_ENTRY(dwc_otg_pcd_request) queue_entry; +#ifdef DWC_UTE_PER_IO + struct dwc_iso_xreq_port ext_req; + //void *priv_ereq_nport; /* */ +#endif +} dwc_otg_pcd_request_t; + +DWC_CIRCLEQ_HEAD(req_list, dwc_otg_pcd_request); + + +#ifdef DEBUG +/* + * This function is called when transfer is timed out. + */ +extern void hc_xfer_timeout(void *ptr); +#endif + +/* + * This function is called when transfer is timed out on endpoint. + */ +extern void ep_xfer_timeout(void *ptr); + +/* + * The following functions are functions for works + * using during handling some interrupts + */ +extern void w_conn_id_status_change(void *p); + +extern void w_wakeup_detected(void *p); + +/** Saves global register values into system memory. */ +extern int dwc_otg_save_global_regs(dwc_otg_core_if_t * core_if); +/** Saves device register values into system memory. */ +extern int dwc_otg_save_dev_regs(dwc_otg_core_if_t * core_if); +/** Saves host register values into system memory. */ +extern int dwc_otg_save_host_regs(dwc_otg_core_if_t * core_if); +/** Restore global register values. */ +extern int dwc_otg_restore_global_regs(dwc_otg_core_if_t * core_if); +/** Restore host register values. */ +extern int dwc_otg_restore_host_regs(dwc_otg_core_if_t * core_if, int reset); +/** Restore device register values. */ +extern int dwc_otg_restore_dev_regs(dwc_otg_core_if_t * core_if, + int rem_wakeup); +extern int restore_lpm_i2c_regs(dwc_otg_core_if_t * core_if); +extern int restore_essential_regs(dwc_otg_core_if_t * core_if, int rmode, + int is_host); + +extern int dwc_otg_host_hibernation_restore(dwc_otg_core_if_t * core_if, + int restore_mode, int reset); +extern int dwc_otg_device_hibernation_restore(dwc_otg_core_if_t * core_if, + int rem_wakeup, int reset); + +/* + * The following functions support initialization of the CIL driver component + * and the DWC_otg controller. + */ +extern void dwc_otg_core_host_init(dwc_otg_core_if_t * _core_if); +extern void dwc_otg_core_dev_init(dwc_otg_core_if_t * _core_if); + +/** @name Device CIL Functions + * The following functions support managing the DWC_otg controller in device + * mode. + */ +/**@{*/ +extern void dwc_otg_wakeup(dwc_otg_core_if_t * _core_if); +extern void dwc_otg_read_setup_packet(dwc_otg_core_if_t * _core_if, + uint32_t * _dest); +extern uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t * _core_if); +extern void dwc_otg_ep0_activate(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep); +extern void dwc_otg_ep_activate(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep); +extern void dwc_otg_ep_deactivate(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep); +extern void dwc_otg_ep_start_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep, + dwc_otg_pcd_request_t *req); +extern void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t * _core_if, + dwc_ep_t * _ep); +extern void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t * _core_if, + dwc_ep_t * _ep); +extern void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t * _core_if, + dwc_ep_t * _ep); +extern void dwc_otg_ep_write_packet(dwc_otg_core_if_t * _core_if, + dwc_ep_t * _ep, int _dma); +extern void dwc_otg_ep_set_stall(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep); +extern void dwc_otg_ep_clear_stall(dwc_otg_core_if_t * _core_if, + dwc_ep_t * _ep); +extern void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t * _core_if); + +#ifdef DWC_EN_ISOC +extern void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t * core_if, + dwc_ep_t * ep); +extern void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t * core_if, + dwc_ep_t * ep); +#endif /* DWC_EN_ISOC */ +/**@}*/ + +/** @name Host CIL Functions + * The following functions support managing the DWC_otg controller in host + * mode. + */ +/**@{*/ +extern void dwc_otg_hc_init(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc); +extern void dwc_otg_hc_halt(dwc_otg_core_if_t * _core_if, + dwc_hc_t * _hc, dwc_otg_halt_status_e _halt_status); +extern void dwc_otg_hc_cleanup(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc); +extern void dwc_otg_hc_start_transfer(dwc_otg_core_if_t * _core_if, + dwc_hc_t * _hc); +extern int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t * _core_if, + dwc_hc_t * _hc); +extern void dwc_otg_hc_do_ping(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc); +extern void dwc_otg_hc_write_packet(dwc_otg_core_if_t * _core_if, + dwc_hc_t * _hc); +extern void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t * _core_if); +extern void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t * _core_if); + +extern void dwc_otg_hc_start_transfer_ddma(dwc_otg_core_if_t * core_if, + dwc_hc_t * hc); + +extern uint32_t calc_frame_interval(dwc_otg_core_if_t * core_if); + +/* Macro used to clear one channel interrupt */ +#define clear_hc_int(_hc_regs_, _intr_) \ +do { \ + hcint_data_t hcint_clear = {.d32 = 0}; \ + hcint_clear.b._intr_ = 1; \ + DWC_WRITE_REG32(&(_hc_regs_)->hcint, hcint_clear.d32); \ +} while (0) + +/* + * Macro used to disable one channel interrupt. Channel interrupts are + * disabled when the channel is halted or released by the interrupt handler. + * There is no need to handle further interrupts of that type until the + * channel is re-assigned. In fact, subsequent handling may cause crashes + * because the channel structures are cleaned up when the channel is released. + */ +#define disable_hc_int(_hc_regs_, _intr_) \ +do { \ + hcintmsk_data_t hcintmsk = {.d32 = 0}; \ + hcintmsk.b._intr_ = 1; \ + DWC_MODIFY_REG32(&(_hc_regs_)->hcintmsk, hcintmsk.d32, 0); \ +} while (0) + +/** + * This function Reads HPRT0 in preparation to modify. It keeps the + * WC bits 0 so that if they are read as 1, they won't clear when you + * write it back + */ +static inline uint32_t dwc_otg_read_hprt0(dwc_otg_core_if_t * _core_if) +{ + hprt0_data_t hprt0; + hprt0.d32 = DWC_READ_REG32(_core_if->host_if->hprt0); + hprt0.b.prtena = 0; + hprt0.b.prtconndet = 0; + hprt0.b.prtenchng = 0; + hprt0.b.prtovrcurrchng = 0; + return hprt0.d32; +} + +/**@}*/ + +/** @name Common CIL Functions + * The following functions support managing the DWC_otg controller in either + * device or host mode. + */ +/**@{*/ + +extern void dwc_otg_read_packet(dwc_otg_core_if_t * core_if, + uint8_t * dest, uint16_t bytes); + +extern void dwc_otg_flush_tx_fifo(dwc_otg_core_if_t * _core_if, const int _num); +extern void dwc_otg_flush_rx_fifo(dwc_otg_core_if_t * _core_if); +extern void dwc_otg_core_reset(dwc_otg_core_if_t * _core_if); + +/** + * This function returns the Core Interrupt register. + */ +static inline uint32_t dwc_otg_read_core_intr(dwc_otg_core_if_t * core_if) +{ + return (DWC_READ_REG32(&core_if->core_global_regs->gintsts) & + DWC_READ_REG32(&core_if->core_global_regs->gintmsk)); +} + +/** + * This function returns the OTG Interrupt register. + */ +static inline uint32_t dwc_otg_read_otg_intr(dwc_otg_core_if_t * core_if) +{ + return (DWC_READ_REG32(&core_if->core_global_regs->gotgint)); +} + +/** + * This function reads the Device All Endpoints Interrupt register and + * returns the IN endpoint interrupt bits. + */ +static inline uint32_t dwc_otg_read_dev_all_in_ep_intr(dwc_otg_core_if_t * + core_if) +{ + + uint32_t v; + + if (core_if->multiproc_int_enable) { + v = DWC_READ_REG32(&core_if->dev_if-> + dev_global_regs->deachint) & + DWC_READ_REG32(&core_if-> + dev_if->dev_global_regs->deachintmsk); + } else { + v = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daint) & + DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daintmsk); + } + return (v & 0xffff); +} + +/** + * This function reads the Device All Endpoints Interrupt register and + * returns the OUT endpoint interrupt bits. + */ +static inline uint32_t dwc_otg_read_dev_all_out_ep_intr(dwc_otg_core_if_t * + core_if) +{ + uint32_t v; + + if (core_if->multiproc_int_enable) { + v = DWC_READ_REG32(&core_if->dev_if-> + dev_global_regs->deachint) & + DWC_READ_REG32(&core_if-> + dev_if->dev_global_regs->deachintmsk); + } else { + v = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daint) & + DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daintmsk); + } + + return ((v & 0xffff0000) >> 16); +} + +/** + * This function returns the Device IN EP Interrupt register + */ +static inline uint32_t dwc_otg_read_dev_in_ep_intr(dwc_otg_core_if_t * core_if, + dwc_ep_t * ep) +{ + dwc_otg_dev_if_t *dev_if = core_if->dev_if; + uint32_t v, msk, emp; + + if (core_if->multiproc_int_enable) { + msk = + DWC_READ_REG32(&dev_if-> + dev_global_regs->diepeachintmsk[ep->num]); + emp = + DWC_READ_REG32(&dev_if-> + dev_global_regs->dtknqr4_fifoemptymsk); + msk |= ((emp >> ep->num) & 0x1) << 7; + v = DWC_READ_REG32(&dev_if->in_ep_regs[ep->num]->diepint) & msk; + } else { + msk = DWC_READ_REG32(&dev_if->dev_global_regs->diepmsk); + emp = + DWC_READ_REG32(&dev_if-> + dev_global_regs->dtknqr4_fifoemptymsk); + msk |= ((emp >> ep->num) & 0x1) << 7; + v = DWC_READ_REG32(&dev_if->in_ep_regs[ep->num]->diepint) & msk; + } + + return v; +} + +/** + * This function returns the Device OUT EP Interrupt register + */ +static inline uint32_t dwc_otg_read_dev_out_ep_intr(dwc_otg_core_if_t * + _core_if, dwc_ep_t * _ep) +{ + dwc_otg_dev_if_t *dev_if = _core_if->dev_if; + uint32_t v; + doepmsk_data_t msk = {.d32 = 0 }; + + if (_core_if->multiproc_int_enable) { + msk.d32 = + DWC_READ_REG32(&dev_if-> + dev_global_regs->doepeachintmsk[_ep->num]); + if (_core_if->pti_enh_enable) { + msk.b.pktdrpsts = 1; + } + v = DWC_READ_REG32(&dev_if-> + out_ep_regs[_ep->num]->doepint) & msk.d32; + } else { + msk.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->doepmsk); + if (_core_if->pti_enh_enable) { + msk.b.pktdrpsts = 1; + } + v = DWC_READ_REG32(&dev_if-> + out_ep_regs[_ep->num]->doepint) & msk.d32; + } + return v; +} + +/** + * This function returns the Host All Channel Interrupt register + */ +static inline uint32_t dwc_otg_read_host_all_channels_intr(dwc_otg_core_if_t * + _core_if) +{ + return (DWC_READ_REG32(&_core_if->host_if->host_global_regs->haint)); +} + +static inline uint32_t dwc_otg_read_host_channel_intr(dwc_otg_core_if_t * + _core_if, dwc_hc_t * _hc) +{ + return (DWC_READ_REG32 + (&_core_if->host_if->hc_regs[_hc->hc_num]->hcint)); +} + +/** + * This function returns the mode of the operation, host or device. + * + * @return 0 - Device Mode, 1 - Host Mode + */ +static inline uint32_t dwc_otg_mode(dwc_otg_core_if_t * _core_if) +{ + return (DWC_READ_REG32(&_core_if->core_global_regs->gintsts) & 0x1); +} + +/**@}*/ + +/** + * DWC_otg CIL callback structure. This structure allows the HCD and + * PCD to register functions used for starting and stopping the PCD + * and HCD for role change on for a DRD. + */ +typedef struct dwc_otg_cil_callbacks { + /** Start function for role change */ + int (*start) (void *_p); + /** Stop Function for role change */ + int (*stop) (void *_p); + /** Disconnect Function for role change */ + int (*disconnect) (void *_p); + /** Resume/Remote wakeup Function */ + int (*resume_wakeup) (void *_p); + /** Suspend function */ + int (*suspend) (void *_p); + /** Session Start (SRP) */ + int (*session_start) (void *_p); +#ifdef CONFIG_USB_DWC_OTG_LPM + /** Sleep (switch to L0 state) */ + int (*sleep) (void *_p); +#endif + /** Pointer passed to start() and stop() */ + void *p; +} dwc_otg_cil_callbacks_t; + +extern void dwc_otg_cil_register_pcd_callbacks(dwc_otg_core_if_t * _core_if, + dwc_otg_cil_callbacks_t * _cb, + void *_p); +extern void dwc_otg_cil_register_hcd_callbacks(dwc_otg_core_if_t * _core_if, + dwc_otg_cil_callbacks_t * _cb, + void *_p); + +void dwc_otg_initiate_srp(dwc_otg_core_if_t * core_if); + +////////////////////////////////////////////////////////////////////// +/** Start the HCD. Helper function for using the HCD callbacks. + * + * @param core_if Programming view of DWC_otg controller. + */ +static inline void cil_hcd_start(dwc_otg_core_if_t * core_if) +{ + if (core_if->hcd_cb && core_if->hcd_cb->start) { + core_if->hcd_cb->start(core_if->hcd_cb->p); + } +} + +/** Stop the HCD. Helper function for using the HCD callbacks. + * + * @param core_if Programming view of DWC_otg controller. + */ +static inline void cil_hcd_stop(dwc_otg_core_if_t * core_if) +{ + if (core_if->hcd_cb && core_if->hcd_cb->stop) { + core_if->hcd_cb->stop(core_if->hcd_cb->p); + } +} + +/** Disconnect the HCD. Helper function for using the HCD callbacks. + * + * @param core_if Programming view of DWC_otg controller. + */ +static inline void cil_hcd_disconnect(dwc_otg_core_if_t * core_if) +{ + if (core_if->hcd_cb && core_if->hcd_cb->disconnect) { + core_if->hcd_cb->disconnect(core_if->hcd_cb->p); + } +} + +/** Inform the HCD the a New Session has begun. Helper function for + * using the HCD callbacks. + * + * @param core_if Programming view of DWC_otg controller. + */ +static inline void cil_hcd_session_start(dwc_otg_core_if_t * core_if) +{ + if (core_if->hcd_cb && core_if->hcd_cb->session_start) { + core_if->hcd_cb->session_start(core_if->hcd_cb->p); + } +} + +#ifdef CONFIG_USB_DWC_OTG_LPM +/** + * Inform the HCD about LPM sleep. + * Helper function for using the HCD callbacks. + * + * @param core_if Programming view of DWC_otg controller. + */ +static inline void cil_hcd_sleep(dwc_otg_core_if_t * core_if) +{ + if (core_if->hcd_cb && core_if->hcd_cb->sleep) { + core_if->hcd_cb->sleep(core_if->hcd_cb->p); + } +} +#endif + +/** Resume the HCD. Helper function for using the HCD callbacks. + * + * @param core_if Programming view of DWC_otg controller. + */ +static inline void cil_hcd_resume(dwc_otg_core_if_t * core_if) +{ + if (core_if->hcd_cb && core_if->hcd_cb->resume_wakeup) { + core_if->hcd_cb->resume_wakeup(core_if->hcd_cb->p); + } +} + +/** Start the PCD. Helper function for using the PCD callbacks. + * + * @param core_if Programming view of DWC_otg controller. + */ +static inline void cil_pcd_start(dwc_otg_core_if_t * core_if) +{ + if (core_if->pcd_cb && core_if->pcd_cb->start) { + core_if->pcd_cb->start(core_if->pcd_cb->p); + } +} + +/** Stop the PCD. Helper function for using the PCD callbacks. + * + * @param core_if Programming view of DWC_otg controller. + */ +static inline void cil_pcd_stop(dwc_otg_core_if_t * core_if) +{ + if (core_if->pcd_cb && core_if->pcd_cb->stop) { + core_if->pcd_cb->stop(core_if->pcd_cb->p); + } +} + +/** Suspend the PCD. Helper function for using the PCD callbacks. + * + * @param core_if Programming view of DWC_otg controller. + */ +static inline void cil_pcd_suspend(dwc_otg_core_if_t * core_if) +{ + if (core_if->pcd_cb && core_if->pcd_cb->suspend) { + core_if->pcd_cb->suspend(core_if->pcd_cb->p); + } +} + +/** Resume the PCD. Helper function for using the PCD callbacks. + * + * @param core_if Programming view of DWC_otg controller. + */ +static inline void cil_pcd_resume(dwc_otg_core_if_t * core_if) +{ + if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) { + core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p); + } +} + +////////////////////////////////////////////////////////////////////// + +#endif |