diff options
Diffstat (limited to 'drivers/usb/dwc3/core.c')
| -rw-r--r-- | drivers/usb/dwc3/core.c | 780 |
1 files changed, 780 insertions, 0 deletions
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c new file mode 100644 index 00000000..1d386030 --- /dev/null +++ b/drivers/usb/dwc3/core.c @@ -0,0 +1,780 @@ +/** + * core.c - DesignWare USB3 DRD Controller Core file + * + * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com + * + * Authors: Felipe Balbi <balbi@ti.com>, + * Sebastian Andrzej Siewior <bigeasy@linutronix.de> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2, as published by the Free + * Software Foundation. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <linux/list.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/of.h> + +#include <linux/usb/otg.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> + +#include "core.h" +#include "gadget.h" +#include "io.h" + +#include "debug.h" + +static char *maximum_speed = "super"; +module_param(maximum_speed, charp, 0); +MODULE_PARM_DESC(maximum_speed, "Maximum supported speed."); + +/* -------------------------------------------------------------------------- */ + +void dwc3_set_mode(struct dwc3 *dwc, u32 mode) +{ + u32 reg; + + reg = dwc3_readl(dwc->regs, DWC3_GCTL); + reg &= ~(DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG)); + reg |= DWC3_GCTL_PRTCAPDIR(mode); + dwc3_writel(dwc->regs, DWC3_GCTL, reg); +} + +/** + * dwc3_core_soft_reset - Issues core soft reset and PHY reset + * @dwc: pointer to our context structure + */ +static void dwc3_core_soft_reset(struct dwc3 *dwc) +{ + u32 reg; + + /* Before Resetting PHY, put Core in Reset */ + reg = dwc3_readl(dwc->regs, DWC3_GCTL); + reg |= DWC3_GCTL_CORESOFTRESET; + dwc3_writel(dwc->regs, DWC3_GCTL, reg); + + /* Assert USB3 PHY reset */ + reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); + reg |= DWC3_GUSB3PIPECTL_PHYSOFTRST; + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); + + /* Assert USB2 PHY reset */ + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + reg |= DWC3_GUSB2PHYCFG_PHYSOFTRST; + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + + usb_phy_init(dwc->usb2_phy); + usb_phy_init(dwc->usb3_phy); + mdelay(100); + + /* Clear USB3 PHY reset */ + reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); + reg &= ~DWC3_GUSB3PIPECTL_PHYSOFTRST; + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); + + /* Clear USB2 PHY reset */ + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + reg &= ~DWC3_GUSB2PHYCFG_PHYSOFTRST; + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + + mdelay(100); + + /* After PHYs are stable we can take Core out of reset state */ + reg = dwc3_readl(dwc->regs, DWC3_GCTL); + reg &= ~DWC3_GCTL_CORESOFTRESET; + dwc3_writel(dwc->regs, DWC3_GCTL, reg); +} + +/** + * dwc3_free_one_event_buffer - Frees one event buffer + * @dwc: Pointer to our controller context structure + * @evt: Pointer to event buffer to be freed + */ +static void dwc3_free_one_event_buffer(struct dwc3 *dwc, + struct dwc3_event_buffer *evt) +{ + dma_free_coherent(dwc->dev, evt->length, evt->buf, evt->dma); +} + +/** + * dwc3_alloc_one_event_buffer - Allocates one event buffer structure + * @dwc: Pointer to our controller context structure + * @length: size of the event buffer + * + * Returns a pointer to the allocated event buffer structure on success + * otherwise ERR_PTR(errno). + */ +static struct dwc3_event_buffer *dwc3_alloc_one_event_buffer(struct dwc3 *dwc, + unsigned length) +{ + struct dwc3_event_buffer *evt; + + evt = devm_kzalloc(dwc->dev, sizeof(*evt), GFP_KERNEL); + if (!evt) + return ERR_PTR(-ENOMEM); + + evt->dwc = dwc; + evt->length = length; + evt->buf = dma_alloc_coherent(dwc->dev, length, + &evt->dma, GFP_KERNEL); + if (!evt->buf) + return ERR_PTR(-ENOMEM); + + return evt; +} + +/** + * dwc3_free_event_buffers - frees all allocated event buffers + * @dwc: Pointer to our controller context structure + */ +static void dwc3_free_event_buffers(struct dwc3 *dwc) +{ + struct dwc3_event_buffer *evt; + int i; + + for (i = 0; i < dwc->num_event_buffers; i++) { + evt = dwc->ev_buffs[i]; + if (evt) + dwc3_free_one_event_buffer(dwc, evt); + } +} + +/** + * dwc3_alloc_event_buffers - Allocates @num event buffers of size @length + * @dwc: pointer to our controller context structure + * @length: size of event buffer + * + * Returns 0 on success otherwise negative errno. In the error case, dwc + * may contain some buffers allocated but not all which were requested. + */ +static int dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length) +{ + int num; + int i; + + num = DWC3_NUM_INT(dwc->hwparams.hwparams1); + dwc->num_event_buffers = num; + + dwc->ev_buffs = devm_kzalloc(dwc->dev, sizeof(*dwc->ev_buffs) * num, + GFP_KERNEL); + if (!dwc->ev_buffs) { + dev_err(dwc->dev, "can't allocate event buffers array\n"); + return -ENOMEM; + } + + for (i = 0; i < num; i++) { + struct dwc3_event_buffer *evt; + + evt = dwc3_alloc_one_event_buffer(dwc, length); + if (IS_ERR(evt)) { + dev_err(dwc->dev, "can't allocate event buffer\n"); + return PTR_ERR(evt); + } + dwc->ev_buffs[i] = evt; + } + + return 0; +} + +/** + * dwc3_event_buffers_setup - setup our allocated event buffers + * @dwc: pointer to our controller context structure + * + * Returns 0 on success otherwise negative errno. + */ +static int dwc3_event_buffers_setup(struct dwc3 *dwc) +{ + struct dwc3_event_buffer *evt; + int n; + + for (n = 0; n < dwc->num_event_buffers; n++) { + evt = dwc->ev_buffs[n]; + dev_dbg(dwc->dev, "Event buf %p dma %08llx length %d\n", + evt->buf, (unsigned long long) evt->dma, + evt->length); + + evt->lpos = 0; + + dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n), + lower_32_bits(evt->dma)); + dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n), + upper_32_bits(evt->dma)); + dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n), + evt->length & 0xffff); + dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(n), 0); + } + + return 0; +} + +static void dwc3_event_buffers_cleanup(struct dwc3 *dwc) +{ + struct dwc3_event_buffer *evt; + int n; + + for (n = 0; n < dwc->num_event_buffers; n++) { + evt = dwc->ev_buffs[n]; + + evt->lpos = 0; + + dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n), 0); + dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n), 0); + dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n), 0); + dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(n), 0); + } +} + +static void dwc3_core_num_eps(struct dwc3 *dwc) +{ + struct dwc3_hwparams *parms = &dwc->hwparams; + + dwc->num_in_eps = DWC3_NUM_IN_EPS(parms); + dwc->num_out_eps = DWC3_NUM_EPS(parms) - dwc->num_in_eps; + + dev_vdbg(dwc->dev, "found %d IN and %d OUT endpoints\n", + dwc->num_in_eps, dwc->num_out_eps); +} + +static void dwc3_cache_hwparams(struct dwc3 *dwc) +{ + struct dwc3_hwparams *parms = &dwc->hwparams; + + parms->hwparams0 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS0); + parms->hwparams1 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS1); + parms->hwparams2 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS2); + parms->hwparams3 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS3); + parms->hwparams4 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS4); + parms->hwparams5 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS5); + parms->hwparams6 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS6); + parms->hwparams7 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS7); + parms->hwparams8 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS8); +} + +/** + * dwc3_core_init - Low-level initialization of DWC3 Core + * @dwc: Pointer to our controller context structure + * + * Returns 0 on success otherwise negative errno. + */ +static int dwc3_core_init(struct dwc3 *dwc) +{ + unsigned long timeout; + u32 reg; + int ret; + + reg = dwc3_readl(dwc->regs, DWC3_GSNPSID); + /* This should read as U3 followed by revision number */ + if ((reg & DWC3_GSNPSID_MASK) != 0x55330000) { + dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n"); + ret = -ENODEV; + goto err0; + } + dwc->revision = reg; + + /* issue device SoftReset too */ + timeout = jiffies + msecs_to_jiffies(500); + dwc3_writel(dwc->regs, DWC3_DCTL, DWC3_DCTL_CSFTRST); + do { + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + if (!(reg & DWC3_DCTL_CSFTRST)) + break; + + if (time_after(jiffies, timeout)) { + dev_err(dwc->dev, "Reset Timed Out\n"); + ret = -ETIMEDOUT; + goto err0; + } + + cpu_relax(); + } while (true); + + dwc3_core_soft_reset(dwc); + + reg = dwc3_readl(dwc->regs, DWC3_GCTL); + reg &= ~DWC3_GCTL_SCALEDOWN_MASK; + reg &= ~DWC3_GCTL_DISSCRAMBLE; + + switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1)) { + case DWC3_GHWPARAMS1_EN_PWROPT_CLK: + reg &= ~DWC3_GCTL_DSBLCLKGTNG; + break; + default: + dev_dbg(dwc->dev, "No power optimization available\n"); + } + + /* + * WORKAROUND: DWC3 revisions <1.90a have a bug + * where the device can fail to connect at SuperSpeed + * and falls back to high-speed mode which causes + * the device to enter a Connect/Disconnect loop + */ + if (dwc->revision < DWC3_REVISION_190A) + reg |= DWC3_GCTL_U2RSTECN; + + dwc3_core_num_eps(dwc); + + dwc3_writel(dwc->regs, DWC3_GCTL, reg); + + return 0; + +err0: + return ret; +} + +static void dwc3_core_exit(struct dwc3 *dwc) +{ + usb_phy_shutdown(dwc->usb2_phy); + usb_phy_shutdown(dwc->usb3_phy); +} + +#define DWC3_ALIGN_MASK (16 - 1) + +static int dwc3_probe(struct platform_device *pdev) +{ + struct device_node *node = pdev->dev.of_node; + struct resource *res; + struct dwc3 *dwc; + struct device *dev = &pdev->dev; + + int ret = -ENOMEM; + + void __iomem *regs; + void *mem; + + u8 mode; + + mem = devm_kzalloc(dev, sizeof(*dwc) + DWC3_ALIGN_MASK, GFP_KERNEL); + if (!mem) { + dev_err(dev, "not enough memory\n"); + return -ENOMEM; + } + dwc = PTR_ALIGN(mem, DWC3_ALIGN_MASK + 1); + dwc->mem = mem; + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res) { + dev_err(dev, "missing IRQ\n"); + return -ENODEV; + } + dwc->xhci_resources[1].start = res->start; + dwc->xhci_resources[1].end = res->end; + dwc->xhci_resources[1].flags = res->flags; + dwc->xhci_resources[1].name = res->name; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(dev, "missing memory resource\n"); + return -ENODEV; + } + dwc->xhci_resources[0].start = res->start; + dwc->xhci_resources[0].end = dwc->xhci_resources[0].start + + DWC3_XHCI_REGS_END; + dwc->xhci_resources[0].flags = res->flags; + dwc->xhci_resources[0].name = res->name; + + /* + * Request memory region but exclude xHCI regs, + * since it will be requested by the xhci-plat driver. + */ + res = devm_request_mem_region(dev, res->start + DWC3_GLOBALS_REGS_START, + resource_size(res) - DWC3_GLOBALS_REGS_START, + dev_name(dev)); + if (!res) { + dev_err(dev, "can't request mem region\n"); + return -ENOMEM; + } + + regs = devm_ioremap_nocache(dev, res->start, resource_size(res)); + if (!regs) { + dev_err(dev, "ioremap failed\n"); + return -ENOMEM; + } + + if (node) { + dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 0); + dwc->usb3_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 1); + } else { + dwc->usb2_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); + dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3); + } + + if (IS_ERR(dwc->usb2_phy)) { + ret = PTR_ERR(dwc->usb2_phy); + + /* + * if -ENXIO is returned, it means PHY layer wasn't + * enabled, so it makes no sense to return -EPROBE_DEFER + * in that case, since no PHY driver will ever probe. + */ + if (ret == -ENXIO) + return ret; + + dev_err(dev, "no usb2 phy configured\n"); + return -EPROBE_DEFER; + } + + if (IS_ERR(dwc->usb3_phy)) { + ret = PTR_ERR(dwc->usb3_phy); + + /* + * if -ENXIO is returned, it means PHY layer wasn't + * enabled, so it makes no sense to return -EPROBE_DEFER + * in that case, since no PHY driver will ever probe. + */ + if (ret == -ENXIO) + return ret; + + dev_err(dev, "no usb3 phy configured\n"); + return -EPROBE_DEFER; + } + + usb_phy_set_suspend(dwc->usb2_phy, 0); + usb_phy_set_suspend(dwc->usb3_phy, 0); + + spin_lock_init(&dwc->lock); + platform_set_drvdata(pdev, dwc); + + dwc->regs = regs; + dwc->regs_size = resource_size(res); + dwc->dev = dev; + + dev->dma_mask = dev->parent->dma_mask; + dev->dma_parms = dev->parent->dma_parms; + dma_set_coherent_mask(dev, dev->parent->coherent_dma_mask); + + if (!strncmp("super", maximum_speed, 5)) + dwc->maximum_speed = DWC3_DCFG_SUPERSPEED; + else if (!strncmp("high", maximum_speed, 4)) + dwc->maximum_speed = DWC3_DCFG_HIGHSPEED; + else if (!strncmp("full", maximum_speed, 4)) + dwc->maximum_speed = DWC3_DCFG_FULLSPEED1; + else if (!strncmp("low", maximum_speed, 3)) + dwc->maximum_speed = DWC3_DCFG_LOWSPEED; + else + dwc->maximum_speed = DWC3_DCFG_SUPERSPEED; + + dwc->needs_fifo_resize = of_property_read_bool(node, "tx-fifo-resize"); + + pm_runtime_enable(dev); + pm_runtime_get_sync(dev); + pm_runtime_forbid(dev); + + dwc3_cache_hwparams(dwc); + + ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_SIZE); + if (ret) { + dev_err(dwc->dev, "failed to allocate event buffers\n"); + ret = -ENOMEM; + goto err0; + } + + ret = dwc3_core_init(dwc); + if (ret) { + dev_err(dev, "failed to initialize core\n"); + goto err0; + } + + ret = dwc3_event_buffers_setup(dwc); + if (ret) { + dev_err(dwc->dev, "failed to setup event buffers\n"); + goto err1; + } + + if (IS_ENABLED(CONFIG_USB_DWC3_HOST)) + mode = DWC3_MODE_HOST; + else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET)) + mode = DWC3_MODE_DEVICE; + else + mode = DWC3_MODE_DRD; + + switch (mode) { + case DWC3_MODE_DEVICE: + dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE); + ret = dwc3_gadget_init(dwc); + if (ret) { + dev_err(dev, "failed to initialize gadget\n"); + goto err2; + } + break; + case DWC3_MODE_HOST: + dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_HOST); + ret = dwc3_host_init(dwc); + if (ret) { + dev_err(dev, "failed to initialize host\n"); + goto err2; + } + break; + case DWC3_MODE_DRD: + dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG); + ret = dwc3_host_init(dwc); + if (ret) { + dev_err(dev, "failed to initialize host\n"); + goto err2; + } + + ret = dwc3_gadget_init(dwc); + if (ret) { + dev_err(dev, "failed to initialize gadget\n"); + goto err2; + } + break; + default: + dev_err(dev, "Unsupported mode of operation %d\n", mode); + goto err2; + } + dwc->mode = mode; + + ret = dwc3_debugfs_init(dwc); + if (ret) { + dev_err(dev, "failed to initialize debugfs\n"); + goto err3; + } + + pm_runtime_allow(dev); + + return 0; + +err3: + switch (mode) { + case DWC3_MODE_DEVICE: + dwc3_gadget_exit(dwc); + break; + case DWC3_MODE_HOST: + dwc3_host_exit(dwc); + break; + case DWC3_MODE_DRD: + dwc3_host_exit(dwc); + dwc3_gadget_exit(dwc); + break; + default: + /* do nothing */ + break; + } + +err2: + dwc3_event_buffers_cleanup(dwc); + +err1: + dwc3_core_exit(dwc); + +err0: + dwc3_free_event_buffers(dwc); + + return ret; +} + +static int dwc3_remove(struct platform_device *pdev) +{ + struct dwc3 *dwc = platform_get_drvdata(pdev); + + dwc3_debugfs_exit(dwc); + + switch (dwc->mode) { + case DWC3_MODE_DEVICE: + dwc3_gadget_exit(dwc); + break; + case DWC3_MODE_HOST: + dwc3_host_exit(dwc); + break; + case DWC3_MODE_DRD: + dwc3_host_exit(dwc); + dwc3_gadget_exit(dwc); + break; + default: + /* do nothing */ + break; + } + + dwc3_event_buffers_cleanup(dwc); + dwc3_free_event_buffers(dwc); + + usb_phy_set_suspend(dwc->usb2_phy, 1); + usb_phy_set_suspend(dwc->usb3_phy, 1); + + dwc3_core_exit(dwc); + + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int dwc3_prepare(struct device *dev) +{ + struct dwc3 *dwc = dev_get_drvdata(dev); + unsigned long flags; + + spin_lock_irqsave(&dwc->lock, flags); + + switch (dwc->mode) { + case DWC3_MODE_DEVICE: + case DWC3_MODE_DRD: + dwc3_gadget_prepare(dwc); + /* FALLTHROUGH */ + case DWC3_MODE_HOST: + default: + dwc3_event_buffers_cleanup(dwc); + break; + } + + spin_unlock_irqrestore(&dwc->lock, flags); + + return 0; +} + +static void dwc3_complete(struct device *dev) +{ + struct dwc3 *dwc = dev_get_drvdata(dev); + unsigned long flags; + + spin_lock_irqsave(&dwc->lock, flags); + + switch (dwc->mode) { + case DWC3_MODE_DEVICE: + case DWC3_MODE_DRD: + dwc3_gadget_complete(dwc); + /* FALLTHROUGH */ + case DWC3_MODE_HOST: + default: + dwc3_event_buffers_setup(dwc); + break; + } + + spin_unlock_irqrestore(&dwc->lock, flags); +} + +static int dwc3_suspend(struct device *dev) +{ + struct dwc3 *dwc = dev_get_drvdata(dev); + unsigned long flags; + + spin_lock_irqsave(&dwc->lock, flags); + + switch (dwc->mode) { + case DWC3_MODE_DEVICE: + case DWC3_MODE_DRD: + dwc3_gadget_suspend(dwc); + /* FALLTHROUGH */ + case DWC3_MODE_HOST: + default: + /* do nothing */ + break; + } + + dwc->gctl = dwc3_readl(dwc->regs, DWC3_GCTL); + spin_unlock_irqrestore(&dwc->lock, flags); + + usb_phy_shutdown(dwc->usb3_phy); + usb_phy_shutdown(dwc->usb2_phy); + + return 0; +} + +static int dwc3_resume(struct device *dev) +{ + struct dwc3 *dwc = dev_get_drvdata(dev); + unsigned long flags; + + usb_phy_init(dwc->usb3_phy); + usb_phy_init(dwc->usb2_phy); + msleep(100); + + spin_lock_irqsave(&dwc->lock, flags); + + dwc3_writel(dwc->regs, DWC3_GCTL, dwc->gctl); + + switch (dwc->mode) { + case DWC3_MODE_DEVICE: + case DWC3_MODE_DRD: + dwc3_gadget_resume(dwc); + /* FALLTHROUGH */ + case DWC3_MODE_HOST: + default: + /* do nothing */ + break; + } + + spin_unlock_irqrestore(&dwc->lock, flags); + + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + + return 0; +} + +static const struct dev_pm_ops dwc3_dev_pm_ops = { + .prepare = dwc3_prepare, + .complete = dwc3_complete, + + SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume) +}; + +#define DWC3_PM_OPS &(dwc3_dev_pm_ops) +#else +#define DWC3_PM_OPS NULL +#endif + +#ifdef CONFIG_OF +static const struct of_device_id of_dwc3_match[] = { + { + .compatible = "synopsys,dwc3" + }, + { }, +}; +MODULE_DEVICE_TABLE(of, of_dwc3_match); +#endif + +static struct platform_driver dwc3_driver = { + .probe = dwc3_probe, + .remove = dwc3_remove, + .driver = { + .name = "dwc3", + .of_match_table = of_match_ptr(of_dwc3_match), + .pm = DWC3_PM_OPS, + }, +}; + +module_platform_driver(dwc3_driver); + +MODULE_ALIAS("platform:dwc3"); +MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>"); +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_DESCRIPTION("DesignWare USB3 DRD Controller Driver"); |