diff options
Diffstat (limited to 'drivers/ata/ahci_platform.c')
| -rw-r--r-- | drivers/ata/ahci_platform.c | 350 |
1 files changed, 350 insertions, 0 deletions
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c new file mode 100644 index 00000000..7a8a2841 --- /dev/null +++ b/drivers/ata/ahci_platform.c @@ -0,0 +1,350 @@ +/* + * AHCI SATA platform driver + * + * Copyright 2004-2005 Red Hat, Inc. + * Jeff Garzik <jgarzik@pobox.com> + * Copyright 2010 MontaVista Software, LLC. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + */ + +#include <linux/clk.h> +#include <linux/kernel.h> +#include <linux/gfp.h> +#include <linux/module.h> +#include <linux/pm.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/libata.h> +#include <linux/ahci_platform.h> +#include "ahci.h" + +static void ahci_host_stop(struct ata_host *host); + +enum ahci_type { + AHCI, /* standard platform ahci */ + IMX53_AHCI, /* ahci on i.mx53 */ + STRICT_AHCI, /* delayed DMA engine start */ +}; + +static struct platform_device_id ahci_devtype[] = { + { + .name = "ahci", + .driver_data = AHCI, + }, { + .name = "imx53-ahci", + .driver_data = IMX53_AHCI, + }, { + .name = "strict-ahci", + .driver_data = STRICT_AHCI, + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(platform, ahci_devtype); + +static struct ata_port_operations ahci_platform_ops = { + .inherits = &ahci_ops, + .host_stop = ahci_host_stop, +}; + +static struct ata_port_operations ahci_platform_retry_srst_ops = { + .inherits = &ahci_pmp_retry_srst_ops, + .host_stop = ahci_host_stop, +}; + +static const struct ata_port_info ahci_port_info[] = { + /* by features */ + [AHCI] = { + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_platform_ops, + }, + [IMX53_AHCI] = { + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_platform_retry_srst_ops, + }, + [STRICT_AHCI] = { + AHCI_HFLAGS (AHCI_HFLAG_DELAY_ENGINE), + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_platform_ops, + }, +}; + +static struct scsi_host_template ahci_platform_sht = { + AHCI_SHT("ahci_platform"), +}; + +static int ahci_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct ahci_platform_data *pdata = dev_get_platdata(dev); + const struct platform_device_id *id = platform_get_device_id(pdev); + struct ata_port_info pi = ahci_port_info[id ? id->driver_data : 0]; + const struct ata_port_info *ppi[] = { &pi, NULL }; + struct ahci_host_priv *hpriv; + struct ata_host *host; + struct resource *mem; + int irq; + int n_ports; + int i; + int rc; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem) { + dev_err(dev, "no mmio space\n"); + return -EINVAL; + } + + irq = platform_get_irq(pdev, 0); + if (irq <= 0) { + dev_err(dev, "no irq\n"); + return -EINVAL; + } + + if (pdata && pdata->ata_port_info) + pi = *pdata->ata_port_info; + + hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL); + if (!hpriv) { + dev_err(dev, "can't alloc ahci_host_priv\n"); + return -ENOMEM; + } + + hpriv->flags |= (unsigned long)pi.private_data; + + hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem)); + if (!hpriv->mmio) { + dev_err(dev, "can't map %pR\n", mem); + return -ENOMEM; + } + + hpriv->clk = clk_get(dev, NULL); + if (IS_ERR(hpriv->clk)) { + dev_err(dev, "can't get clock\n"); + } else { + rc = clk_prepare_enable(hpriv->clk); + if (rc) { + dev_err(dev, "clock prepare enable failed"); + goto free_clk; + } + } + + /* + * Some platforms might need to prepare for mmio region access, + * which could be done in the following init call. So, the mmio + * region shouldn't be accessed before init (if provided) has + * returned successfully. + */ + if (pdata && pdata->init) { + rc = pdata->init(dev, hpriv->mmio); + if (rc) + goto disable_unprepare_clk; + } + + ahci_save_initial_config(dev, hpriv, + pdata ? pdata->force_port_map : 0, + pdata ? pdata->mask_port_map : 0); + + /* prepare host */ + if (hpriv->cap & HOST_CAP_NCQ) + pi.flags |= ATA_FLAG_NCQ; + + if (hpriv->cap & HOST_CAP_PMP) + pi.flags |= ATA_FLAG_PMP; + + ahci_set_em_messages(hpriv, &pi); + + /* CAP.NP sometimes indicate the index of the last enabled + * port, at other times, that of the last possible port, so + * determining the maximum port number requires looking at + * both CAP.NP and port_map. + */ + n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map)); + + host = ata_host_alloc_pinfo(dev, ppi, n_ports); + if (!host) { + rc = -ENOMEM; + goto pdata_exit; + } + + host->private_data = hpriv; + + if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss) + host->flags |= ATA_HOST_PARALLEL_SCAN; + else + printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n"); + + if (pi.flags & ATA_FLAG_EM) + ahci_reset_em(host); + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + + ata_port_desc(ap, "mmio %pR", mem); + ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80); + + /* set enclosure management message type */ + if (ap->flags & ATA_FLAG_EM) + ap->em_message_type = hpriv->em_msg_type; + + /* disabled/not-implemented port */ + if (!(hpriv->port_map & (1 << i))) + ap->ops = &ata_dummy_port_ops; + } + + rc = ahci_reset_controller(host); + if (rc) + goto pdata_exit; + + ahci_init_controller(host); + ahci_print_info(host, "platform"); + + rc = ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED, + &ahci_platform_sht); + if (rc) + goto pdata_exit; + + return 0; +pdata_exit: + if (pdata && pdata->exit) + pdata->exit(dev); +disable_unprepare_clk: + if (!IS_ERR(hpriv->clk)) + clk_disable_unprepare(hpriv->clk); +free_clk: + if (!IS_ERR(hpriv->clk)) + clk_put(hpriv->clk); + return rc; +} + +static void ahci_host_stop(struct ata_host *host) +{ + struct device *dev = host->dev; + struct ahci_platform_data *pdata = dev_get_platdata(dev); + struct ahci_host_priv *hpriv = host->private_data; + + if (pdata && pdata->exit) + pdata->exit(dev); + + if (!IS_ERR(hpriv->clk)) { + clk_disable_unprepare(hpriv->clk); + clk_put(hpriv->clk); + } +} + +#ifdef CONFIG_PM_SLEEP +static int ahci_suspend(struct device *dev) +{ + struct ahci_platform_data *pdata = dev_get_platdata(dev); + struct ata_host *host = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host->private_data; + void __iomem *mmio = hpriv->mmio; + u32 ctl; + int rc; + + if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) { + dev_err(dev, "firmware update required for suspend/resume\n"); + return -EIO; + } + + /* + * AHCI spec rev1.1 section 8.3.3: + * Software must disable interrupts prior to requesting a + * transition of the HBA to D3 state. + */ + ctl = readl(mmio + HOST_CTL); + ctl &= ~HOST_IRQ_EN; + writel(ctl, mmio + HOST_CTL); + readl(mmio + HOST_CTL); /* flush */ + + rc = ata_host_suspend(host, PMSG_SUSPEND); + if (rc) + return rc; + + if (pdata && pdata->suspend) + return pdata->suspend(dev); + + if (!IS_ERR(hpriv->clk)) + clk_disable_unprepare(hpriv->clk); + + return 0; +} + +static int ahci_resume(struct device *dev) +{ + struct ahci_platform_data *pdata = dev_get_platdata(dev); + struct ata_host *host = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host->private_data; + int rc; + + if (!IS_ERR(hpriv->clk)) { + rc = clk_prepare_enable(hpriv->clk); + if (rc) { + dev_err(dev, "clock prepare enable failed"); + return rc; + } + } + + if (pdata && pdata->resume) { + rc = pdata->resume(dev); + if (rc) + goto disable_unprepare_clk; + } + + if (dev->power.power_state.event == PM_EVENT_SUSPEND) { + rc = ahci_reset_controller(host); + if (rc) + goto disable_unprepare_clk; + + ahci_init_controller(host); + } + + ata_host_resume(host); + + return 0; + +disable_unprepare_clk: + if (!IS_ERR(hpriv->clk)) + clk_disable_unprepare(hpriv->clk); + + return rc; +} +#endif + +static SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_suspend, ahci_resume); + +static const struct of_device_id ahci_of_match[] = { + { .compatible = "snps,spear-ahci", }, + {}, +}; +MODULE_DEVICE_TABLE(of, ahci_of_match); + +static struct platform_driver ahci_driver = { + .probe = ahci_probe, + .remove = ata_platform_remove_one, + .driver = { + .name = "ahci", + .owner = THIS_MODULE, + .of_match_table = ahci_of_match, + .pm = &ahci_pm_ops, + }, + .id_table = ahci_devtype, +}; +module_platform_driver(ahci_driver); + +MODULE_DESCRIPTION("AHCI SATA platform driver"); +MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:ahci"); |
