diff options
Diffstat (limited to 'arch/arm/mach-shmobile/board-ag5evm.c')
| -rw-r--r-- | arch/arm/mach-shmobile/board-ag5evm.c | 672 |
1 files changed, 672 insertions, 0 deletions
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c new file mode 100644 index 00000000..c7540710 --- /dev/null +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -0,0 +1,672 @@ +/* + * arch/arm/mach-shmobile/board-ag5evm.c + * + * Copyright (C) 2010 Takashi Yoshii <yoshii.takashi.zj@renesas.com> + * Copyright (C) 2009 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/dma-mapping.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> +#include <linux/serial_sci.h> +#include <linux/smsc911x.h> +#include <linux/gpio.h> +#include <linux/videodev2.h> +#include <linux/input.h> +#include <linux/input/sh_keysc.h> +#include <linux/mmc/host.h> +#include <linux/mmc/sh_mmcif.h> +#include <linux/mmc/sh_mobile_sdhi.h> +#include <linux/mfd/tmio.h> +#include <linux/sh_clk.h> +#include <linux/irqchip/arm-gic.h> +#include <video/sh_mobile_lcdc.h> +#include <video/sh_mipi_dsi.h> +#include <sound/sh_fsi.h> +#include <mach/hardware.h> +#include <mach/irqs.h> +#include <mach/sh73a0.h> +#include <mach/common.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/hardware/cache-l2x0.h> +#include <asm/traps.h> + +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + +static struct resource smsc9220_resources[] = { + [0] = { + .start = 0x14000000, + .end = 0x14000000 + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = SH73A0_PINT0_IRQ(2), /* PINTA2 */ + .flags = IORESOURCE_IRQ, + }, +}; + +static struct smsc911x_platform_config smsc9220_platdata = { + .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, + .phy_interface = PHY_INTERFACE_MODE_MII, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, +}; + +static struct platform_device eth_device = { + .name = "smsc911x", + .id = 0, + .dev = { + .platform_data = &smsc9220_platdata, + }, + .resource = smsc9220_resources, + .num_resources = ARRAY_SIZE(smsc9220_resources), +}; + +static struct sh_keysc_info keysc_platdata = { + .mode = SH_KEYSC_MODE_6, + .scan_timing = 3, + .delay = 100, + .keycodes = { + KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, KEY_F, KEY_G, + KEY_H, KEY_I, KEY_J, KEY_K, KEY_L, KEY_M, KEY_N, + KEY_O, KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T, KEY_U, + KEY_V, KEY_W, KEY_X, KEY_Y, KEY_Z, KEY_HOME, KEY_SLEEP, + KEY_SPACE, KEY_9, KEY_6, KEY_3, KEY_WAKEUP, KEY_RIGHT, \ + KEY_COFFEE, + KEY_0, KEY_8, KEY_5, KEY_2, KEY_DOWN, KEY_ENTER, KEY_UP, + KEY_KPASTERISK, KEY_7, KEY_4, KEY_1, KEY_STOP, KEY_LEFT, \ + KEY_COMPUTER, + }, +}; + +static struct resource keysc_resources[] = { + [0] = { + .name = "KEYSC", + .start = 0xe61b0000, + .end = 0xe61b0098 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gic_spi(71), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device keysc_device = { + .name = "sh_keysc", + .id = 0, + .num_resources = ARRAY_SIZE(keysc_resources), + .resource = keysc_resources, + .dev = { + .platform_data = &keysc_platdata, + }, +}; + +/* FSI A */ +static struct resource fsi_resources[] = { + [0] = { + .name = "FSI", + .start = 0xEC230000, + .end = 0xEC230400 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gic_spi(146), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device fsi_device = { + .name = "sh_fsi2", + .id = -1, + .num_resources = ARRAY_SIZE(fsi_resources), + .resource = fsi_resources, +}; + +/* Fixed 1.8V regulator to be used by MMCIF */ +static struct regulator_consumer_supply fixed1v8_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"), +}; + +static struct resource sh_mmcif_resources[] = { + [0] = { + .name = "MMCIF", + .start = 0xe6bd0000, + .end = 0xe6bd00ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gic_spi(141), + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = gic_spi(140), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct sh_mmcif_plat_data sh_mmcif_platdata = { + .sup_pclk = 0, + .ocr = MMC_VDD_165_195, + .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, +}; + +static struct platform_device mmc_device = { + .name = "sh_mmcif", + .id = 0, + .dev = { + .dma_mask = NULL, + .coherent_dma_mask = 0xffffffff, + .platform_data = &sh_mmcif_platdata, + }, + .num_resources = ARRAY_SIZE(sh_mmcif_resources), + .resource = sh_mmcif_resources, +}; + +/* IrDA */ +static struct resource irda_resources[] = { + [0] = { + .start = 0xE6D00000, + .end = 0xE6D01FD4 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gic_spi(95), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device irda_device = { + .name = "sh_irda", + .id = 0, + .resource = irda_resources, + .num_resources = ARRAY_SIZE(irda_resources), +}; + +/* MIPI-DSI */ +static struct resource mipidsi0_resources[] = { + [0] = { + .name = "DSI0", + .start = 0xfeab0000, + .end = 0xfeab3fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "DSI0", + .start = 0xfeab4000, + .end = 0xfeab7fff, + .flags = IORESOURCE_MEM, + }, +}; + +static int sh_mipi_set_dot_clock(struct platform_device *pdev, + void __iomem *base, + int enable) +{ + struct clk *pck, *phy; + int ret; + + pck = clk_get(&pdev->dev, "dsip_clk"); + if (IS_ERR(pck)) { + ret = PTR_ERR(pck); + goto sh_mipi_set_dot_clock_pck_err; + } + + phy = clk_get(&pdev->dev, "dsiphy_clk"); + if (IS_ERR(phy)) { + ret = PTR_ERR(phy); + goto sh_mipi_set_dot_clock_phy_err; + } + + if (enable) { + clk_set_rate(pck, clk_round_rate(pck, 24000000)); + clk_set_rate(phy, clk_round_rate(pck, 510000000)); + clk_enable(pck); + clk_enable(phy); + } else { + clk_disable(pck); + clk_disable(phy); + } + + ret = 0; + + clk_put(phy); +sh_mipi_set_dot_clock_phy_err: + clk_put(pck); +sh_mipi_set_dot_clock_pck_err: + return ret; +} + +static struct sh_mipi_dsi_info mipidsi0_info = { + .data_format = MIPI_RGB888, + .channel = LCDC_CHAN_MAINLCD, + .lane = 2, + .vsynw_offset = 20, + .clksrc = 1, + .flags = SH_MIPI_DSI_HSABM | + SH_MIPI_DSI_SYNC_PULSES_MODE | + SH_MIPI_DSI_HSbyteCLK, + .set_dot_clock = sh_mipi_set_dot_clock, +}; + +static struct platform_device mipidsi0_device = { + .name = "sh-mipi-dsi", + .num_resources = ARRAY_SIZE(mipidsi0_resources), + .resource = mipidsi0_resources, + .id = 0, + .dev = { + .platform_data = &mipidsi0_info, + }, +}; + +static unsigned char lcd_backlight_seq[3][2] = { + { 0x04, 0x07 }, + { 0x23, 0x80 }, + { 0x03, 0x01 }, +}; + +static int lcd_backlight_set_brightness(int brightness) +{ + struct i2c_adapter *adap; + struct i2c_msg msg; + unsigned int i; + int ret; + + if (brightness == 0) { + /* Reset the chip */ + gpio_set_value(235, 0); + mdelay(24); + gpio_set_value(235, 1); + return 0; + } + + adap = i2c_get_adapter(1); + if (adap == NULL) + return -ENODEV; + + for (i = 0; i < ARRAY_SIZE(lcd_backlight_seq); i++) { + msg.addr = 0x6d; + msg.buf = &lcd_backlight_seq[i][0]; + msg.len = 2; + msg.flags = 0; + + ret = i2c_transfer(adap, &msg, 1); + if (ret < 0) + break; + } + + i2c_put_adapter(adap); + return ret < 0 ? ret : 0; +} + +/* LCDC0 */ +static const struct fb_videomode lcdc0_modes[] = { + { + .name = "R63302(QHD)", + .xres = 544, + .yres = 961, + .left_margin = 72, + .right_margin = 600, + .hsync_len = 16, + .upper_margin = 8, + .lower_margin = 8, + .vsync_len = 2, + .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT, + }, +}; + +static struct sh_mobile_lcdc_info lcdc0_info = { + .clock_source = LCDC_CLK_PERIPHERAL, + .ch[0] = { + .chan = LCDC_CHAN_MAINLCD, + .interface_type = RGB24, + .clock_divider = 1, + .flags = LCDC_FLAGS_DWPOL, + .fourcc = V4L2_PIX_FMT_RGB565, + .lcd_modes = lcdc0_modes, + .num_modes = ARRAY_SIZE(lcdc0_modes), + .panel_cfg = { + .width = 44, + .height = 79, + }, + .bl_info = { + .name = "sh_mobile_lcdc_bl", + .max_brightness = 1, + .set_brightness = lcd_backlight_set_brightness, + }, + .tx_dev = &mipidsi0_device, + } +}; + +static struct resource lcdc0_resources[] = { + [0] = { + .name = "LCDC0", + .start = 0xfe940000, /* P4-only space */ + .end = 0xfe943fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = intcs_evt2irq(0x580), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device lcdc0_device = { + .name = "sh_mobile_lcdc_fb", + .num_resources = ARRAY_SIZE(lcdc0_resources), + .resource = lcdc0_resources, + .id = 0, + .dev = { + .platform_data = &lcdc0_info, + .coherent_dma_mask = ~0, + }, +}; + +/* Fixed 2.8V regulators to be used by SDHI0 */ +static struct regulator_consumer_supply fixed2v8_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), +}; + +/* SDHI0 */ +static struct sh_mobile_sdhi_info sdhi0_info = { + .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD, + .tmio_caps = MMC_CAP_SD_HIGHSPEED, + .tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29, + .cd_gpio = 251, +}; + +static struct resource sdhi0_resources[] = { + [0] = { + .name = "SDHI0", + .start = 0xee100000, + .end = 0xee1000ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = SH_MOBILE_SDHI_IRQ_CARD_DETECT, + .start = gic_spi(83), + .flags = IORESOURCE_IRQ, + }, + [2] = { + .name = SH_MOBILE_SDHI_IRQ_SDCARD, + .start = gic_spi(84), + .flags = IORESOURCE_IRQ, + }, + [3] = { + .name = SH_MOBILE_SDHI_IRQ_SDIO, + .start = gic_spi(85), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sdhi0_device = { + .name = "sh_mobile_sdhi", + .id = 0, + .num_resources = ARRAY_SIZE(sdhi0_resources), + .resource = sdhi0_resources, + .dev = { + .platform_data = &sdhi0_info, + }, +}; + +/* Fixed 3.3V regulator to be used by SDHI1 */ +static struct regulator_consumer_supply cn4_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), +}; + +static struct regulator_init_data cn4_power_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(cn4_power_consumers), + .consumer_supplies = cn4_power_consumers, +}; + +static struct fixed_voltage_config cn4_power_info = { + .supply_name = "CN4 SD/MMC Vdd", + .microvolts = 3300000, + .gpio = 114, + .enable_high = 1, + .init_data = &cn4_power_init_data, +}; + +static struct platform_device cn4_power = { + .name = "reg-fixed-voltage", + .id = 2, + .dev = { + .platform_data = &cn4_power_info, + }, +}; + +static void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state) +{ + static int power_gpio = -EINVAL; + + if (power_gpio < 0) { + int ret = gpio_request_one(114, GPIOF_OUT_INIT_LOW, + "sdhi1_power"); + if (!ret) + power_gpio = 114; + } + + /* + * If requesting the GPIO above failed, it means, that the regulator got + * probed and grabbed the GPIO, but we don't know, whether the sdhi + * driver already uses the regulator. If it doesn't, we have to toggle + * the GPIO ourselves, even though it is now owned by the fixed + * regulator driver. We have to live with the race in case the driver + * gets unloaded and the GPIO freed between these two steps. + */ + gpio_set_value(114, state); +} + +static struct sh_mobile_sdhi_info sh_sdhi1_info = { + .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT, + .tmio_caps = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ, + .tmio_ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .set_pwr = ag5evm_sdhi1_set_pwr, +}; + +static struct resource sdhi1_resources[] = { + [0] = { + .name = "SDHI1", + .start = 0xee120000, + .end = 0xee1200ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = SH_MOBILE_SDHI_IRQ_CARD_DETECT, + .start = gic_spi(87), + .flags = IORESOURCE_IRQ, + }, + [2] = { + .name = SH_MOBILE_SDHI_IRQ_SDCARD, + .start = gic_spi(88), + .flags = IORESOURCE_IRQ, + }, + [3] = { + .name = SH_MOBILE_SDHI_IRQ_SDIO, + .start = gic_spi(89), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sdhi1_device = { + .name = "sh_mobile_sdhi", + .id = 1, + .dev = { + .platform_data = &sh_sdhi1_info, + }, + .num_resources = ARRAY_SIZE(sdhi1_resources), + .resource = sdhi1_resources, +}; + +static struct platform_device *ag5evm_devices[] __initdata = { + &cn4_power, + ð_device, + &keysc_device, + &fsi_device, + &mmc_device, + &irda_device, + &mipidsi0_device, + &lcdc0_device, + &sdhi0_device, + &sdhi1_device, +}; + +static unsigned long pin_pullup_conf[] = { + PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0), +}; + +static const struct pinctrl_map ag5evm_pinctrl_map[] = { + /* FSIA */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0", + "fsia_mclk_in", "fsia"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0", + "fsia_sclk_in", "fsia"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0", + "fsia_data_in", "fsia"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0", + "fsia_data_out", "fsia"), + /* I2C2 & I2C3 */ + PIN_MAP_MUX_GROUP_DEFAULT("i2c-sh_mobile.2", "pfc-sh73a0", + "i2c2_0", "i2c2"), + PIN_MAP_MUX_GROUP_DEFAULT("i2c-sh_mobile.3", "pfc-sh73a0", + "i2c3_0", "i2c3"), + /* IrDA */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_irda.0", "pfc-sh73a0", + "irda_0", "irda"), + /* KEYSC */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", + "keysc_in8", "keysc"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", + "keysc_out04", "keysc"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", + "keysc_out5", "keysc"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", + "keysc_out6_0", "keysc"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", + "keysc_out7_0", "keysc"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", + "keysc_out8_0", "keysc"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", + "keysc_out9_2", "keysc"), + PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", + "keysc_in8", pin_pullup_conf), + /* MMCIF */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0", + "mmc0_data8_0", "mmc0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0", + "mmc0_ctrl_0", "mmc0"), + PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mmcif.0", "pfc-sh73a0", + "PORT279", pin_pullup_conf), + PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0", + "mmc0_data8_0", pin_pullup_conf), + /* SCIFA2 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh73a0", + "scifa2_data_0", "scifa2"), + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh73a0", + "scifa2_ctrl_0", "scifa2"), + /* SDHI0 (CN15 [SD I/F]) */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0", + "sdhi0_data4", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0", + "sdhi0_ctrl", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0", + "sdhi0_wp", "sdhi0"), + /* SDHI1 (CN4 [WLAN I/F]) */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0", + "sdhi1_data4", "sdhi1"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0", + "sdhi1_ctrl", "sdhi1"), + PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0", + "sdhi1_data4", pin_pullup_conf), + PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0", + "PORT263", pin_pullup_conf), +}; + +static void __init ag5evm_init(void) +{ + regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers, + ARRAY_SIZE(fixed1v8_power_consumers), 1800000); + regulator_register_always_on(1, "fixed-2.8V", fixed2v8_power_consumers, + ARRAY_SIZE(fixed2v8_power_consumers), 3300000); + regulator_register_fixed(3, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + + pinctrl_register_mappings(ag5evm_pinctrl_map, + ARRAY_SIZE(ag5evm_pinctrl_map)); + sh73a0_pinmux_init(); + + /* enable MMCIF */ + gpio_request_one(208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */ + + /* enable SMSC911X */ + gpio_request_one(144, GPIOF_IN, NULL); /* PINTA2 */ + gpio_request_one(145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */ + + /* LCD panel */ + gpio_request_one(217, GPIOF_OUT_INIT_LOW, NULL); /* RESET */ + mdelay(1); + gpio_set_value(217, 1); + mdelay(100); + + /* LCD backlight controller */ + gpio_request_one(235, GPIOF_OUT_INIT_LOW, NULL); /* RESET */ + lcd_backlight_set_brightness(0); + +#ifdef CONFIG_CACHE_L2X0 + /* Shared attribute override enable, 64K*8way */ + l2x0_init(IOMEM(0xf0100000), 0x00460000, 0xc2000fff); +#endif + sh73a0_add_standard_devices(); + platform_add_devices(ag5evm_devices, ARRAY_SIZE(ag5evm_devices)); +} + +MACHINE_START(AG5EVM, "ag5evm") + .smp = smp_ops(sh73a0_smp_ops), + .map_io = sh73a0_map_io, + .init_early = sh73a0_add_early_devices, + .nr_irqs = NR_IRQS_LEGACY, + .init_irq = sh73a0_init_irq, + .init_machine = ag5evm_init, + .init_late = shmobile_init_late, + .init_time = sh73a0_earlytimer_init, +MACHINE_END |