diff options
Diffstat (limited to 'arch/arm/mach-omap2/Kconfig')
| -rw-r--r-- | arch/arm/mach-omap2/Kconfig | 432 |
1 files changed, 432 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig new file mode 100644 index 00000000..42afc668 --- /dev/null +++ b/arch/arm/mach-omap2/Kconfig @@ -0,0 +1,432 @@ +config ARCH_OMAP + bool + +config ARCH_OMAP2PLUS + bool "TI OMAP2/3/4/5 SoCs with device tree support" if (ARCH_MULTI_V6 || ARCH_MULTI_V7) + select ARCH_HAS_CPUFREQ + select ARCH_HAS_HOLES_MEMORYMODEL + select ARCH_OMAP + select ARCH_REQUIRE_GPIOLIB + select CLKDEV_LOOKUP + select CLKSRC_MMIO + select GENERIC_CLOCKEVENTS + select GENERIC_IRQ_CHIP + select HAVE_CLK + select OMAP_DM_TIMER + select PINCTRL + select PROC_DEVICETREE if PROC_FS + select SOC_BUS + select SPARSE_IRQ + select USE_OF + help + Systems based on OMAP2, OMAP3, OMAP4 or OMAP5 + + +if ARCH_OMAP2PLUS + +menu "TI OMAP2/3/4 Specific Features" + +config ARCH_OMAP2PLUS_TYPICAL + bool "Typical OMAP configuration" + default y + select AEABI + select HIGHMEM + select I2C + select I2C_OMAP + select MENELAUS if ARCH_OMAP2 + select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5 + select PM_RUNTIME + select REGULATOR + select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4 + select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4 + select VFP + help + Compile a kernel suitable for booting most boards + +config SOC_HAS_OMAP2_SDRC + bool "OMAP2 SDRAM Controller support" + +config SOC_HAS_REALTIME_COUNTER + bool "Real time free running counter" + depends on SOC_OMAP5 + default y + +config ARCH_OMAP2 + bool "TI OMAP2" + depends on ARCH_OMAP2PLUS + depends on ARCH_MULTI_V6 + default y + select CPU_V6 + select MULTI_IRQ_HANDLER + select SOC_HAS_OMAP2_SDRC + select COMMON_CLK + +config ARCH_OMAP3 + bool "TI OMAP3" + depends on ARCH_OMAP2PLUS + depends on ARCH_MULTI_V7 + default y + select ARCH_HAS_OPP + select ARM_CPU_SUSPEND if PM + select CPU_V7 + select MULTI_IRQ_HANDLER + select OMAP_INTERCONNECT + select PM_OPP if PM + select PM_RUNTIME if CPU_IDLE + select SOC_HAS_OMAP2_SDRC + select COMMON_CLK + select USB_ARCH_HAS_EHCI if USB_SUPPORT + +config ARCH_OMAP4 + bool "TI OMAP4" + default y + depends on ARCH_OMAP2PLUS + depends on ARCH_MULTI_V7 + select ARCH_HAS_OPP + select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP + select ARM_CPU_SUSPEND if PM + select ARM_ERRATA_720789 + select ARM_GIC + select CACHE_L2X0 + select CPU_V7 + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if LOCAL_TIMERS + select HAVE_SMP + select LOCAL_TIMERS if SMP + select OMAP_INTERCONNECT + select PL310_ERRATA_588369 + select PL310_ERRATA_727915 + select PM_OPP if PM + select PM_RUNTIME if CPU_IDLE + select USB_ARCH_HAS_EHCI if USB_SUPPORT + select COMMON_CLK + select ARM_ERRATA_754322 + select ARM_ERRATA_775420 + +config SOC_OMAP5 + bool "TI OMAP5" + depends on ARCH_MULTI_V7 + select ARM_CPU_SUSPEND if PM + select ARM_GIC + select CPU_V7 + select HAVE_SMP + select COMMON_CLK + select HAVE_ARM_ARCH_TIMER + +comment "OMAP Core Type" + depends on ARCH_OMAP2 + +config SOC_OMAP2420 + bool "OMAP2420 support" + depends on ARCH_OMAP2 + default y + select OMAP_DM_TIMER + select SOC_HAS_OMAP2_SDRC + +config SOC_OMAP2430 + bool "OMAP2430 support" + depends on ARCH_OMAP2 + default y + select SOC_HAS_OMAP2_SDRC + +config SOC_OMAP3430 + bool "OMAP3430 support" + depends on ARCH_OMAP3 + default y + select SOC_HAS_OMAP2_SDRC + +config SOC_TI81XX + bool "TI81XX support" + depends on ARCH_OMAP3 + default y + +config SOC_AM33XX + bool "AM33XX support" + depends on ARCH_MULTI_V7 + default y + select ARM_CPU_SUSPEND if PM + select CPU_V7 + select MULTI_IRQ_HANDLER + select COMMON_CLK + +config OMAP_PACKAGE_ZAF + bool + +config OMAP_PACKAGE_ZAC + bool + +config OMAP_PACKAGE_CBC + bool + +config OMAP_PACKAGE_CBB + bool + +config OMAP_PACKAGE_CUS + bool + +config OMAP_PACKAGE_CBP + bool + +config OMAP_PACKAGE_CBL + bool + +config OMAP_PACKAGE_CBS + bool + +comment "OMAP Board Type" + depends on ARCH_OMAP2PLUS + +config MACH_OMAP_GENERIC + bool "Generic OMAP2+ board" + depends on ARCH_OMAP2PLUS + default y + help + Support for generic TI OMAP2+ boards using Flattened Device Tree. + More information at Documentation/devicetree + +config MACH_OMAP2_TUSB6010 + bool + depends on ARCH_OMAP2 && SOC_OMAP2420 + default y if MACH_NOKIA_N8X0 + +config MACH_OMAP_H4 + bool "OMAP 2420 H4 board" + depends on SOC_OMAP2420 + default y + select OMAP_DEBUG_DEVICES + select OMAP_PACKAGE_ZAF + +config MACH_OMAP_2430SDP + bool "OMAP 2430 SDP board" + depends on SOC_OMAP2430 + default y + select OMAP_PACKAGE_ZAC + +config MACH_OMAP3_BEAGLE + bool "OMAP3 BEAGLE board" + depends on ARCH_OMAP3 + default y + select OMAP_PACKAGE_CBB + +config MACH_DEVKIT8000 + bool "DEVKIT8000 board" + depends on ARCH_OMAP3 + default y + select OMAP_PACKAGE_CUS + +config MACH_OMAP_LDP + bool "OMAP3 LDP board" + depends on ARCH_OMAP3 + default y + select OMAP_PACKAGE_CBB + +config MACH_OMAP3530_LV_SOM + bool "OMAP3 Logic 3530 LV SOM board" + depends on ARCH_OMAP3 + default y + select OMAP_PACKAGE_CBB + help + Support for the LogicPD OMAP3530 SOM Development kit + for full description please see the products webpage at + http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap35x-development-kit + +config MACH_OMAP3_TORPEDO + bool "OMAP3 Logic 35x Torpedo board" + depends on ARCH_OMAP3 + default y + select OMAP_PACKAGE_CBB + help + Support for the LogicPD OMAP35x Torpedo Development kit + for full description please see the products webpage at + http://www.logicpd.com/products/development-kits/zoom-omap35x-torpedo-development-kit + +config MACH_OVERO + bool "Gumstix Overo board" + depends on ARCH_OMAP3 + default y + select OMAP_PACKAGE_CBB + +config MACH_OMAP3EVM + bool "OMAP 3530 EVM board" + depends on ARCH_OMAP3 + default y + select OMAP_PACKAGE_CBB + +config MACH_OMAP3517EVM + bool "OMAP3517/ AM3517 EVM board" + depends on ARCH_OMAP3 + default y + select OMAP_PACKAGE_CBB + +config MACH_CRANEBOARD + bool "AM3517/05 CRANE board" + depends on ARCH_OMAP3 + select OMAP_PACKAGE_CBB + +config MACH_OMAP3_PANDORA + bool "OMAP3 Pandora" + depends on ARCH_OMAP3 + default y + select OMAP_PACKAGE_CBB + select REGULATOR_FIXED_VOLTAGE if REGULATOR + +config MACH_TOUCHBOOK + bool "OMAP3 Touch Book" + depends on ARCH_OMAP3 + default y + select OMAP_PACKAGE_CBB + +config MACH_OMAP_3430SDP + bool "OMAP 3430 SDP board" + depends on ARCH_OMAP3 + default y + select OMAP_PACKAGE_CBB + +config MACH_NOKIA_N800 + bool + +config MACH_NOKIA_N810 + bool + +config MACH_NOKIA_N810_WIMAX + bool + +config MACH_NOKIA_N8X0 + bool "Nokia N800/N810" + depends on SOC_OMAP2420 + default y + select MACH_NOKIA_N800 + select MACH_NOKIA_N810 + select MACH_NOKIA_N810_WIMAX + select OMAP_PACKAGE_ZAC + +config MACH_NOKIA_RM680 + bool "Nokia N950 (RM-680) / N9 (RM-696) phones" + depends on ARCH_OMAP3 + default y + select MACH_NOKIA_RM696 + select OMAP_PACKAGE_CBB + +config MACH_NOKIA_RX51 + bool "Nokia N900 (RX-51) phone" + depends on ARCH_OMAP3 + default y + select OMAP_PACKAGE_CBB + +config MACH_OMAP_ZOOM2 + bool "OMAP3 Zoom2 board" + depends on ARCH_OMAP3 + default y + select OMAP_PACKAGE_CBB + select REGULATOR_FIXED_VOLTAGE if REGULATOR + +config MACH_OMAP_ZOOM3 + bool "OMAP3630 Zoom3 board" + depends on ARCH_OMAP3 + default y + select OMAP_PACKAGE_CBP + select REGULATOR_FIXED_VOLTAGE if REGULATOR + +config MACH_CM_T35 + bool "CompuLab CM-T35/CM-T3730 modules" + depends on ARCH_OMAP3 + default y + select MACH_CM_T3730 + select OMAP_PACKAGE_CUS + +config MACH_CM_T3517 + bool "CompuLab CM-T3517 module" + depends on ARCH_OMAP3 + default y + select OMAP_PACKAGE_CBB + +config MACH_CM_T3730 + bool + +config MACH_IGEP0020 + bool "IGEP v2 board" + depends on ARCH_OMAP3 + default y + select OMAP_PACKAGE_CBB + +config MACH_IGEP0030 + bool "IGEP OMAP3 module" + depends on ARCH_OMAP3 + default y + select MACH_IGEP0020 + select OMAP_PACKAGE_CBB + +config MACH_SBC3530 + bool "OMAP3 SBC STALKER board" + depends on ARCH_OMAP3 + default y + select OMAP_PACKAGE_CUS + +config MACH_OMAP_3630SDP + bool "OMAP3630 SDP board" + depends on ARCH_OMAP3 + default y + select OMAP_PACKAGE_CBP + +config MACH_TI8168EVM + bool "TI8168 Evaluation Module" + depends on SOC_TI81XX + default y + +config MACH_TI8148EVM + bool "TI8148 Evaluation Module" + depends on SOC_TI81XX + default y + +config MACH_OMAP_4430SDP + bool "OMAP 4430 SDP board" + default y + depends on ARCH_OMAP4 + select OMAP_PACKAGE_CBL + select OMAP_PACKAGE_CBS + select REGULATOR_FIXED_VOLTAGE if REGULATOR + +config MACH_OMAP4_PANDA + bool "OMAP4 Panda Board" + default y + depends on ARCH_OMAP4 + select OMAP_PACKAGE_CBL + select OMAP_PACKAGE_CBS + select REGULATOR_FIXED_VOLTAGE if REGULATOR + +config OMAP3_SDRC_AC_TIMING + bool "Enable SDRC AC timing register changes" + depends on ARCH_OMAP3 + default n + help + If you know that none of your system initiators will attempt to + access SDRAM during CORE DVFS, select Y here. This should boost + SDRAM performance at lower CORE OPPs. There are relatively few + users who will wish to say yes at this point - almost everyone will + wish to say no. Selecting yes without understanding what is + going on could result in system crashes; + +config OMAP4_ERRATA_I688 + bool "OMAP4 errata: Async Bridge Corruption" + depends on (ARCH_OMAP4 || SOC_OMAP5) && !ARCH_MULTIPLATFORM + select ARCH_HAS_BARRIERS + help + If a data is stalled inside asynchronous bridge because of back + pressure, it may be accepted multiple times, creating pointer + misalignment that will corrupt next transfers on that data path + until next reset of the system (No recovery procedure once the + issue is hit, the path remains consistently broken). Async bridge + can be found on path between MPU to EMIF and MPU to L3 interconnect. + This situation can happen only when the idle is initiated by a + Master Request Disconnection (which is trigged by software when + executing WFI on CPU). + The work-around for this errata needs all the initiators connected + through async bridge must ensure that data path is properly drained + before issuing WFI. This condition will be met if one Strongly ordered + access is performed to the target right before executing the WFI. + In MPU case, L3 T2ASYNC FIFO and DDR T2ASYNC FIFO needs to be drained. + IO barrier ensure that there is no synchronisation loss on initiators + operating on both interconnect port simultaneously. +endmenu + +endif |