diff options
Diffstat (limited to 'arch/arm/mach-clps711x')
19 files changed, 2023 insertions, 0 deletions
diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig new file mode 100644 index 00000000..2d00165e --- /dev/null +++ b/arch/arm/mach-clps711x/Kconfig @@ -0,0 +1,56 @@ +if ARCH_CLPS711X + +menu "CLPS711X/EP721X/EP731X Implementations" + +config ARCH_AUTCPU12 + bool "AUTCPU12" + help + Say Y if you intend to run the kernel on the autronix autcpu12 + board. This board is based on a Cirrus Logic CS89712. + +config ARCH_CDB89712 + bool "CDB89712" + help + This is an evaluation board from Cirrus for the CS89712 processor. + The board includes 2 serial ports, Ethernet, IRDA, and expansion + headers. It comes with 16 MB SDRAM and 8 MB flash ROM. + +config ARCH_CLEP7312 + bool "CLEP7312" + help + Boards based on the Cirrus Logic 7212/7312 chips. + +config ARCH_EDB7211 + bool "EDB7211" + select ARCH_SELECT_MEMORY_MODEL + select ARCH_SPARSEMEM_ENABLE + help + Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211 + evaluation board. + +config ARCH_P720T + bool "P720T" + help + Say Y here if you intend to run this kernel on the ARM Prospector + 720T. + +config ARCH_FORTUNET + bool "FORTUNET" + +config EP72XX_ROM_BOOT + bool "EP721x/EP731x ROM boot" + help + If you say Y here, your CLPS711x-based kernel will use the bootstrap + mode memory map instead of the normal memory map. + + Processors derived from the Cirrus CLPS711X core support two boot + modes. Normal mode boots from the external memory device at CS0. + Bootstrap mode rearranges parts of the memory map, placing an + internal 128 byte bootstrap ROM at CS0. This option performs the + address map changes required to support booting in this mode. + + You almost surely want to say N here. + +endmenu + +endif diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile new file mode 100644 index 00000000..992995af --- /dev/null +++ b/arch/arm/mach-clps711x/Makefile @@ -0,0 +1,17 @@ +# +# Makefile for the linux kernel. +# + +# Object file lists. + +obj-y := common.o +obj-m := +obj-n := +obj- := + +obj-$(CONFIG_ARCH_AUTCPU12) += board-autcpu12.o +obj-$(CONFIG_ARCH_CDB89712) += board-cdb89712.o +obj-$(CONFIG_ARCH_CLEP7312) += board-clep7312.o +obj-$(CONFIG_ARCH_EDB7211) += board-edb7211.o +obj-$(CONFIG_ARCH_FORTUNET) += board-fortunet.o +obj-$(CONFIG_ARCH_P720T) += board-p720t.o diff --git a/arch/arm/mach-clps711x/Makefile.boot b/arch/arm/mach-clps711x/Makefile.boot new file mode 100644 index 00000000..eba77d35 --- /dev/null +++ b/arch/arm/mach-clps711x/Makefile.boot @@ -0,0 +1,5 @@ +# The standard locations for stuff on CLPS711x type processors +params_phys-y := 0xc0000100 +# Should probably have some agreement on these... +initrd_phys-$(CONFIG_ARCH_P720T) := 0xc0400000 +initrd_phys-$(CONFIG_ARCH_CDB89712) := 0x00700000 diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c new file mode 100644 index 00000000..f3858470 --- /dev/null +++ b/arch/arm/mach-clps711x/board-autcpu12.c @@ -0,0 +1,179 @@ +/* + * linux/arch/arm/mach-clps711x/autcpu12.c + * + * (c) 2001 Thomas Gleixner, autronix automation <gleixner@autronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/nand-gpio.h> +#include <linux/platform_device.h> +#include <linux/basic_mmio_gpio.h> + +#include <mach/hardware.h> +#include <asm/sizes.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/pgtable.h> +#include <asm/page.h> + +#include <asm/mach/map.h> +#include <mach/autcpu12.h> + +#include "common.h" + +#define AUTCPU12_CS8900_BASE (CS2_PHYS_BASE + 0x300) +#define AUTCPU12_CS8900_IRQ (IRQ_EINT3) + +#define AUTCPU12_SMC_BASE (CS1_PHYS_BASE + 0x06000000) +#define AUTCPU12_SMC_SEL_BASE (AUTCPU12_SMC_BASE + 0x10) + +#define AUTCPU12_MMGPIO_BASE (CLPS711X_NR_GPIO) +#define AUTCPU12_SMC_NCE (AUTCPU12_MMGPIO_BASE + 0) /* Bit 0 */ +#define AUTCPU12_SMC_RDY CLPS711X_GPIO(1, 2) +#define AUTCPU12_SMC_ALE CLPS711X_GPIO(1, 3) +#define AUTCPU12_SMC_CLE CLPS711X_GPIO(1, 3) + +static struct resource autcpu12_cs8900_resource[] __initdata = { + DEFINE_RES_MEM(AUTCPU12_CS8900_BASE, SZ_1K), + DEFINE_RES_IRQ(AUTCPU12_CS8900_IRQ), +}; + +static struct resource autcpu12_nvram_resource[] __initdata = { + DEFINE_RES_MEM_NAMED(AUTCPU12_PHYS_NVRAM, SZ_128K, "SRAM"), +}; + +static struct platform_device autcpu12_nvram_pdev __initdata = { + .name = "autcpu12_nvram", + .id = -1, + .resource = autcpu12_nvram_resource, + .num_resources = ARRAY_SIZE(autcpu12_nvram_resource), +}; + +static struct resource autcpu12_nand_resource[] __initdata = { + DEFINE_RES_MEM(AUTCPU12_SMC_BASE, SZ_16), +}; + +static struct mtd_partition autcpu12_nand_parts[] __initdata = { + { + .name = "Flash partition 1", + .offset = 0, + .size = SZ_8M, + }, + { + .name = "Flash partition 2", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static void __init autcpu12_adjust_parts(struct gpio_nand_platdata *pdata, + size_t sz) +{ + switch (sz) { + case SZ_16M: + case SZ_32M: + break; + case SZ_64M: + case SZ_128M: + pdata->parts[0].size = SZ_16M; + break; + default: + pr_warn("Unsupported SmartMedia device size %u\n", sz); + break; + } +} + +static struct gpio_nand_platdata autcpu12_nand_pdata __initdata = { + .gpio_rdy = AUTCPU12_SMC_RDY, + .gpio_nce = AUTCPU12_SMC_NCE, + .gpio_ale = AUTCPU12_SMC_ALE, + .gpio_cle = AUTCPU12_SMC_CLE, + .gpio_nwp = -1, + .chip_delay = 20, + .parts = autcpu12_nand_parts, + .num_parts = ARRAY_SIZE(autcpu12_nand_parts), + .adjust_parts = autcpu12_adjust_parts, +}; + +static struct platform_device autcpu12_nand_pdev __initdata = { + .name = "gpio-nand", + .id = -1, + .resource = autcpu12_nand_resource, + .num_resources = ARRAY_SIZE(autcpu12_nand_resource), + .dev = { + .platform_data = &autcpu12_nand_pdata, + }, +}; + +static struct resource autcpu12_mmgpio_resource[] __initdata = { + DEFINE_RES_MEM_NAMED(AUTCPU12_SMC_SEL_BASE, SZ_1, "dat"), +}; + +static struct bgpio_pdata autcpu12_mmgpio_pdata __initdata = { + .base = AUTCPU12_MMGPIO_BASE, + .ngpio = 8, +}; + +static struct platform_device autcpu12_mmgpio_pdev __initdata = { + .name = "basic-mmio-gpio", + .id = -1, + .resource = autcpu12_mmgpio_resource, + .num_resources = ARRAY_SIZE(autcpu12_mmgpio_resource), + .dev = { + .platform_data = &autcpu12_mmgpio_pdata, + }, +}; + +static void __init autcpu12_init(void) +{ + platform_device_register_simple("video-clps711x", 0, NULL, 0); + platform_device_register_simple("cs89x0", 0, autcpu12_cs8900_resource, + ARRAY_SIZE(autcpu12_cs8900_resource)); + platform_device_register(&autcpu12_mmgpio_pdev); + platform_device_register(&autcpu12_nvram_pdev); +} + +static void __init autcpu12_init_late(void) +{ + if (IS_ENABLED(MTD_NAND_GPIO) && IS_ENABLED(GPIO_GENERIC_PLATFORM)) { + /* We are need both drivers to handle NAND */ + platform_device_register(&autcpu12_nand_pdev); + } +} + +MACHINE_START(AUTCPU12, "autronix autcpu12") + /* Maintainer: Thomas Gleixner */ + .atag_offset = 0x20000, + .nr_irqs = CLPS711X_NR_IRQS, + .map_io = clps711x_map_io, + .init_irq = clps711x_init_irq, + .init_time = clps711x_timer_init, + .init_machine = autcpu12_init, + .init_late = autcpu12_init_late, + .handle_irq = clps711x_handle_irq, + .restart = clps711x_restart, +MACHINE_END + diff --git a/arch/arm/mach-clps711x/board-cdb89712.c b/arch/arm/mach-clps711x/board-cdb89712.c new file mode 100644 index 00000000..baab7da3 --- /dev/null +++ b/arch/arm/mach-clps711x/board-cdb89712.c @@ -0,0 +1,147 @@ +/* + * linux/arch/arm/mach-clps711x/cdb89712.c + * + * Copyright (C) 2000-2001 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> + +#include <linux/mtd/physmap.h> +#include <linux/mtd/plat-ram.h> +#include <linux/mtd/partitions.h> + +#include <mach/hardware.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include "common.h" + +#define CDB89712_CS8900_BASE (CS2_PHYS_BASE + 0x300) +#define CDB89712_CS8900_IRQ (IRQ_EINT3) + +static struct resource cdb89712_cs8900_resource[] __initdata = { + DEFINE_RES_MEM(CDB89712_CS8900_BASE, SZ_1K), + DEFINE_RES_IRQ(CDB89712_CS8900_IRQ), +}; + +static struct mtd_partition cdb89712_flash_partitions[] __initdata = { + { + .name = "Flash", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data cdb89712_flash_pdata __initdata = { + .width = 4, + .probe_type = "map_rom", + .parts = cdb89712_flash_partitions, + .nr_parts = ARRAY_SIZE(cdb89712_flash_partitions), +}; + +static struct resource cdb89712_flash_resources[] __initdata = { + DEFINE_RES_MEM(CS0_PHYS_BASE, SZ_8M), +}; + +static struct platform_device cdb89712_flash_pdev __initdata = { + .name = "physmap-flash", + .id = 0, + .resource = cdb89712_flash_resources, + .num_resources = ARRAY_SIZE(cdb89712_flash_resources), + .dev = { + .platform_data = &cdb89712_flash_pdata, + }, +}; + +static struct mtd_partition cdb89712_bootrom_partitions[] __initdata = { + { + .name = "BootROM", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data cdb89712_bootrom_pdata __initdata = { + .width = 4, + .probe_type = "map_rom", + .parts = cdb89712_bootrom_partitions, + .nr_parts = ARRAY_SIZE(cdb89712_bootrom_partitions), +}; + +static struct resource cdb89712_bootrom_resources[] __initdata = { + DEFINE_RES_NAMED(CS7_PHYS_BASE, SZ_128, "BOOTROM", IORESOURCE_MEM | + IORESOURCE_CACHEABLE | IORESOURCE_READONLY), +}; + +static struct platform_device cdb89712_bootrom_pdev __initdata = { + .name = "physmap-flash", + .id = 1, + .resource = cdb89712_bootrom_resources, + .num_resources = ARRAY_SIZE(cdb89712_bootrom_resources), + .dev = { + .platform_data = &cdb89712_bootrom_pdata, + }, +}; + +static struct platdata_mtd_ram cdb89712_sram_pdata __initdata = { + .bankwidth = 4, +}; + +static struct resource cdb89712_sram_resources[] __initdata = { + DEFINE_RES_MEM(CLPS711X_SRAM_BASE, CLPS711X_SRAM_SIZE), +}; + +static struct platform_device cdb89712_sram_pdev __initdata = { + .name = "mtd-ram", + .id = 0, + .resource = cdb89712_sram_resources, + .num_resources = ARRAY_SIZE(cdb89712_sram_resources), + .dev = { + .platform_data = &cdb89712_sram_pdata, + }, +}; + +static void __init cdb89712_init(void) +{ + platform_device_register(&cdb89712_flash_pdev); + platform_device_register(&cdb89712_bootrom_pdev); + platform_device_register(&cdb89712_sram_pdev); + platform_device_register_simple("cs89x0", 0, cdb89712_cs8900_resource, + ARRAY_SIZE(cdb89712_cs8900_resource)); +} + +MACHINE_START(CDB89712, "Cirrus-CDB89712") + /* Maintainer: Ray Lehtiniemi */ + .atag_offset = 0x100, + .nr_irqs = CLPS711X_NR_IRQS, + .map_io = clps711x_map_io, + .init_irq = clps711x_init_irq, + .init_time = clps711x_timer_init, + .init_machine = cdb89712_init, + .handle_irq = clps711x_handle_irq, + .restart = clps711x_restart, +MACHINE_END diff --git a/arch/arm/mach-clps711x/board-clep7312.c b/arch/arm/mach-clps711x/board-clep7312.c new file mode 100644 index 00000000..014aa3c1 --- /dev/null +++ b/arch/arm/mach-clps711x/board-clep7312.c @@ -0,0 +1,46 @@ +/* + * linux/arch/arm/mach-clps711x/clep7312.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/init.h> +#include <linux/types.h> +#include <linux/string.h> + +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include "common.h" + +static void __init +fixup_clep7312(struct tag *tags, char **cmdline, struct meminfo *mi) +{ + mi->nr_banks=1; + mi->bank[0].start = 0xc0000000; + mi->bank[0].size = 0x01000000; +} + +MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312") + /* Maintainer: Nobody */ + .atag_offset = 0x0100, + .nr_irqs = CLPS711X_NR_IRQS, + .fixup = fixup_clep7312, + .map_io = clps711x_map_io, + .init_irq = clps711x_init_irq, + .init_time = clps711x_timer_init, + .handle_irq = clps711x_handle_irq, + .restart = clps711x_restart, +MACHINE_END diff --git a/arch/arm/mach-clps711x/board-edb7211.c b/arch/arm/mach-clps711x/board-edb7211.c new file mode 100644 index 00000000..5f928e9e --- /dev/null +++ b/arch/arm/mach-clps711x/board-edb7211.c @@ -0,0 +1,180 @@ +/* + * Copyright (C) 2000, 2001 Blue Mug, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/init.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/memblock.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/backlight.h> +#include <linux/platform_device.h> + +#include <linux/mtd/physmap.h> +#include <linux/mtd/partitions.h> + +#include <asm/setup.h> +#include <asm/mach/map.h> +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include <video/platform_lcd.h> + +#include <mach/hardware.h> + +#include "common.h" + +#define VIDEORAM_SIZE SZ_128K + +#define EDB7211_LCD_DC_DC_EN CLPS711X_GPIO(3, 1) +#define EDB7211_LCDEN CLPS711X_GPIO(3, 2) +#define EDB7211_LCDBL CLPS711X_GPIO(3, 3) + +#define EDB7211_FLASH0_BASE (CS0_PHYS_BASE) +#define EDB7211_FLASH1_BASE (CS1_PHYS_BASE) +#define EDB7211_CS8900_BASE (CS2_PHYS_BASE + 0x300) +#define EDB7211_CS8900_IRQ (IRQ_EINT3) + +static struct resource edb7211_cs8900_resource[] __initdata = { + DEFINE_RES_MEM(EDB7211_CS8900_BASE, SZ_1K), + DEFINE_RES_IRQ(EDB7211_CS8900_IRQ), +}; + +static struct mtd_partition edb7211_flash_partitions[] __initdata = { + { + .name = "Flash", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data edb7211_flash_pdata __initdata = { + .width = 4, + .parts = edb7211_flash_partitions, + .nr_parts = ARRAY_SIZE(edb7211_flash_partitions), +}; + +static struct resource edb7211_flash_resources[] __initdata = { + DEFINE_RES_MEM(EDB7211_FLASH0_BASE, SZ_8M), + DEFINE_RES_MEM(EDB7211_FLASH1_BASE, SZ_8M), +}; + +static struct platform_device edb7211_flash_pdev __initdata = { + .name = "physmap-flash", + .id = 0, + .resource = edb7211_flash_resources, + .num_resources = ARRAY_SIZE(edb7211_flash_resources), + .dev = { + .platform_data = &edb7211_flash_pdata, + }, +}; + +static void edb7211_lcd_power_set(struct plat_lcd_data *pd, unsigned int power) +{ + if (power) { + gpio_set_value(EDB7211_LCDEN, 1); + udelay(100); + gpio_set_value(EDB7211_LCD_DC_DC_EN, 1); + } else { + gpio_set_value(EDB7211_LCD_DC_DC_EN, 0); + udelay(100); + gpio_set_value(EDB7211_LCDEN, 0); + } +} + +static struct plat_lcd_data edb7211_lcd_power_pdata = { + .set_power = edb7211_lcd_power_set, +}; + +static void edb7211_lcd_backlight_set_intensity(int intensity) +{ + gpio_set_value(EDB7211_LCDBL, intensity); +} + +static struct generic_bl_info edb7211_lcd_backlight_pdata = { + .name = "lcd-backlight.0", + .default_intensity = 0x01, + .max_intensity = 0x01, + .set_bl_intensity = edb7211_lcd_backlight_set_intensity, +}; + +static struct gpio edb7211_gpios[] __initconst = { + { EDB7211_LCD_DC_DC_EN, GPIOF_OUT_INIT_LOW, "LCD DC-DC" }, + { EDB7211_LCDEN, GPIOF_OUT_INIT_LOW, "LCD POWER" }, + { EDB7211_LCDBL, GPIOF_OUT_INIT_LOW, "LCD BACKLIGHT" }, +}; + +static struct map_desc edb7211_io_desc[] __initdata = { + { /* Memory-mapped extra keyboard row */ + .virtual = IO_ADDRESS(EP7211_PHYS_EXTKBD), + .pfn = __phys_to_pfn(EP7211_PHYS_EXTKBD), + .length = SZ_1M, + .type = MT_DEVICE, + }, +}; + +void __init edb7211_map_io(void) +{ + clps711x_map_io(); + iotable_init(edb7211_io_desc, ARRAY_SIZE(edb7211_io_desc)); +} + +/* Reserve screen memory region at the start of main system memory. */ +static void __init edb7211_reserve(void) +{ + memblock_reserve(PHYS_OFFSET, VIDEORAM_SIZE); +} + +static void __init +fixup_edb7211(struct tag *tags, char **cmdline, struct meminfo *mi) +{ + /* + * Bank start addresses are not present in the information + * passed in from the boot loader. We could potentially + * detect them, but instead we hard-code them. + * + * Banks sizes _are_ present in the param block, but we're + * not using that information yet. + */ + mi->bank[0].start = 0xc0000000; + mi->bank[0].size = SZ_8M; + mi->bank[1].start = 0xc1000000; + mi->bank[1].size = SZ_8M; + mi->nr_banks = 2; +} + +static void __init edb7211_init(void) +{ + gpio_request_array(edb7211_gpios, ARRAY_SIZE(edb7211_gpios)); + + platform_device_register(&edb7211_flash_pdev); + platform_device_register_data(&platform_bus, "platform-lcd", 0, + &edb7211_lcd_power_pdata, + sizeof(edb7211_lcd_power_pdata)); + platform_device_register_data(&platform_bus, "generic-bl", 0, + &edb7211_lcd_backlight_pdata, + sizeof(edb7211_lcd_backlight_pdata)); + platform_device_register_simple("video-clps711x", 0, NULL, 0); + platform_device_register_simple("cs89x0", 0, edb7211_cs8900_resource, + ARRAY_SIZE(edb7211_cs8900_resource)); +} + +MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)") + /* Maintainer: Jon McClintock */ + .atag_offset = VIDEORAM_SIZE + 0x100, + .nr_irqs = CLPS711X_NR_IRQS, + .fixup = fixup_edb7211, + .reserve = edb7211_reserve, + .map_io = edb7211_map_io, + .init_irq = clps711x_init_irq, + .init_time = clps711x_timer_init, + .init_machine = edb7211_init, + .handle_irq = clps711x_handle_irq, + .restart = clps711x_restart, +MACHINE_END diff --git a/arch/arm/mach-clps711x/board-fortunet.c b/arch/arm/mach-clps711x/board-fortunet.c new file mode 100644 index 00000000..c5675efc --- /dev/null +++ b/arch/arm/mach-clps711x/board-fortunet.c @@ -0,0 +1,84 @@ +/* + * linux/arch/arm/mach-clps711x/fortunet.c + * + * Derived from linux/arch/arm/mach-integrator/arch.c + * + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/types.h> +#include <linux/init.h> +#include <linux/initrd.h> + +#include <mach/hardware.h> +#include <asm/setup.h> +#include <asm/mach-types.h> + +#include <asm/mach/arch.h> + +#include <asm/memory.h> + +#include "common.h" + +struct meminfo memmap = { + .nr_banks = 1, + .bank = { + { + .start = 0xC0000000, + .size = 0x01000000, + }, + }, +}; + +typedef struct tag_IMAGE_PARAMS +{ + int ramdisk_ok; + int ramdisk_address; + int ramdisk_size; + int ram_size; + int extra_param_type; + int extra_param_ptr; + int command_line; +} IMAGE_PARAMS; + +#define IMAGE_PARAMS_PHYS 0xC01F0000 + +static void __init +fortunet_fixup(struct tag *tags, char **cmdline, struct meminfo *mi) +{ + IMAGE_PARAMS *ip = phys_to_virt(IMAGE_PARAMS_PHYS); + *cmdline = phys_to_virt(ip->command_line); +#ifdef CONFIG_BLK_DEV_INITRD + if(ip->ramdisk_ok) + { + initrd_start = __phys_to_virt(ip->ramdisk_address); + initrd_end = initrd_start + ip->ramdisk_size; + } +#endif + memmap.bank[0].size = ip->ram_size; + *mi = memmap; +} + +MACHINE_START(FORTUNET, "ARM-FortuNet") + /* Maintainer: FortuNet Inc. */ + .nr_irqs = CLPS711X_NR_IRQS, + .fixup = fortunet_fixup, + .map_io = clps711x_map_io, + .init_irq = clps711x_init_irq, + .init_time = clps711x_timer_init, + .handle_irq = clps711x_handle_irq, + .restart = clps711x_restart, +MACHINE_END diff --git a/arch/arm/mach-clps711x/board-p720t.c b/arch/arm/mach-clps711x/board-p720t.c new file mode 100644 index 00000000..8d3ee677 --- /dev/null +++ b/arch/arm/mach-clps711x/board-p720t.c @@ -0,0 +1,232 @@ +/* + * linux/arch/arm/mach-clps711x/p720t.c + * + * Copyright (C) 2000-2001 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/leds.h> +#include <linux/sizes.h> +#include <linux/backlight.h> +#include <linux/platform_device.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/nand-gpio.h> + +#include <mach/hardware.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <mach/syspld.h> + +#include <video/platform_lcd.h> + +#include "common.h" + +#define P720T_USERLED CLPS711X_GPIO(3, 0) +#define P720T_NAND_CLE CLPS711X_GPIO(4, 0) +#define P720T_NAND_ALE CLPS711X_GPIO(4, 1) +#define P720T_NAND_NCE CLPS711X_GPIO(4, 2) + +#define P720T_NAND_BASE (CLPS711X_SDRAM1_BASE) + +static struct resource p720t_nand_resource[] __initdata = { + DEFINE_RES_MEM(P720T_NAND_BASE, SZ_4), +}; + +static struct mtd_partition p720t_nand_parts[] __initdata = { + { + .name = "Flash partition 1", + .offset = 0, + .size = SZ_2M, + }, + { + .name = "Flash partition 2", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct gpio_nand_platdata p720t_nand_pdata __initdata = { + .gpio_rdy = -1, + .gpio_nce = P720T_NAND_NCE, + .gpio_ale = P720T_NAND_ALE, + .gpio_cle = P720T_NAND_CLE, + .gpio_nwp = -1, + .chip_delay = 15, + .parts = p720t_nand_parts, + .num_parts = ARRAY_SIZE(p720t_nand_parts), +}; + +static struct platform_device p720t_nand_pdev __initdata = { + .name = "gpio-nand", + .id = -1, + .resource = p720t_nand_resource, + .num_resources = ARRAY_SIZE(p720t_nand_resource), + .dev = { + .platform_data = &p720t_nand_pdata, + }, +}; + +static void p720t_lcd_power_set(struct plat_lcd_data *pd, unsigned int power) +{ + if (power) { + PLD_LCDEN = PLD_LCDEN_EN; + PLD_PWR |= PLD_S4_ON | PLD_S2_ON | PLD_S1_ON; + } else { + PLD_PWR &= ~(PLD_S4_ON | PLD_S2_ON | PLD_S1_ON); + PLD_LCDEN = 0; + } +} + +static struct plat_lcd_data p720t_lcd_power_pdata = { + .set_power = p720t_lcd_power_set, +}; + +static void p720t_lcd_backlight_set_intensity(int intensity) +{ + if (intensity) + PLD_PWR |= PLD_S3_ON; + else + PLD_PWR = 0; +} + +static struct generic_bl_info p720t_lcd_backlight_pdata = { + .name = "lcd-backlight.0", + .default_intensity = 0x01, + .max_intensity = 0x01, + .set_bl_intensity = p720t_lcd_backlight_set_intensity, +}; + +/* + * Map the P720T system PLD. It occupies two address spaces: + * 0x10000000 and 0x10400000. We map both regions as one. + */ +static struct map_desc p720t_io_desc[] __initdata = { + { + .virtual = SYSPLD_VIRT_BASE, + .pfn = __phys_to_pfn(SYSPLD_PHYS_BASE), + .length = SZ_8M, + .type = MT_DEVICE, + }, +}; + +static void __init +fixup_p720t(struct tag *tag, char **cmdline, struct meminfo *mi) +{ + /* + * Our bootloader doesn't setup any tags (yet). + */ + if (tag->hdr.tag != ATAG_CORE) { + tag->hdr.tag = ATAG_CORE; + tag->hdr.size = tag_size(tag_core); + tag->u.core.flags = 0; + tag->u.core.pagesize = PAGE_SIZE; + tag->u.core.rootdev = 0x0100; + + tag = tag_next(tag); + tag->hdr.tag = ATAG_MEM; + tag->hdr.size = tag_size(tag_mem32); + tag->u.mem.size = 4096; + tag->u.mem.start = PHYS_OFFSET; + + tag = tag_next(tag); + tag->hdr.tag = ATAG_NONE; + tag->hdr.size = 0; + } +} + +static void __init p720t_map_io(void) +{ + clps711x_map_io(); + iotable_init(p720t_io_desc, ARRAY_SIZE(p720t_io_desc)); +} + +static void __init p720t_init_early(void) +{ + /* + * Power down as much as possible in case we don't + * have the drivers loaded. + */ + PLD_LCDEN = 0; + PLD_PWR &= ~(PLD_S4_ON|PLD_S3_ON|PLD_S2_ON|PLD_S1_ON); + + PLD_KBD = 0; + PLD_IO = 0; + PLD_IRDA = 0; + PLD_CODEC = 0; + PLD_TCH = 0; + PLD_SPI = 0; + if (!IS_ENABLED(CONFIG_DEBUG_LL)) { + PLD_COM2 = 0; + PLD_COM1 = 0; + } +} + +static struct gpio_led p720t_gpio_leds[] = { + { + .name = "User LED", + .default_trigger = "heartbeat", + .gpio = P720T_USERLED, + }, +}; + +static struct gpio_led_platform_data p720t_gpio_led_pdata __initdata = { + .leds = p720t_gpio_leds, + .num_leds = ARRAY_SIZE(p720t_gpio_leds), +}; + +static void __init p720t_init(void) +{ + platform_device_register(&p720t_nand_pdev); + platform_device_register_data(&platform_bus, "platform-lcd", 0, + &p720t_lcd_power_pdata, + sizeof(p720t_lcd_power_pdata)); + platform_device_register_data(&platform_bus, "generic-bl", 0, + &p720t_lcd_backlight_pdata, + sizeof(p720t_lcd_backlight_pdata)); + platform_device_register_simple("video-clps711x", 0, NULL, 0); +} + +static void __init p720t_init_late(void) +{ + platform_device_register_data(&platform_bus, "leds-gpio", 0, + &p720t_gpio_led_pdata, + sizeof(p720t_gpio_led_pdata)); +} + +MACHINE_START(P720T, "ARM-Prospector720T") + /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ + .atag_offset = 0x100, + .nr_irqs = CLPS711X_NR_IRQS, + .fixup = fixup_p720t, + .map_io = p720t_map_io, + .init_early = p720t_init_early, + .init_irq = clps711x_init_irq, + .init_time = clps711x_timer_init, + .init_machine = p720t_init, + .init_late = p720t_init_late, + .handle_irq = clps711x_handle_irq, + .restart = clps711x_restart, +MACHINE_END diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c new file mode 100644 index 00000000..20ff50f3 --- /dev/null +++ b/arch/arm/mach-clps711x/common.c @@ -0,0 +1,367 @@ +/* + * linux/arch/arm/mach-clps711x/core.c + * + * Core support for the CLPS711x-based machines. + * + * Copyright (C) 2001,2011 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/io.h> +#include <linux/init.h> +#include <linux/sizes.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/clockchips.h> +#include <linux/clk-provider.h> + +#include <asm/exception.h> +#include <asm/mach/irq.h> +#include <asm/mach/map.h> +#include <asm/mach/time.h> +#include <asm/system_misc.h> + +#include <mach/hardware.h> + +static struct clk *clk_pll, *clk_bus, *clk_uart, *clk_timerl, *clk_timerh, + *clk_tint, *clk_spi; + +/* + * This maps the generic CLPS711x registers + */ +static struct map_desc clps711x_io_desc[] __initdata = { + { + .virtual = (unsigned long)CLPS711X_VIRT_BASE, + .pfn = __phys_to_pfn(CLPS711X_PHYS_BASE), + .length = SZ_64K, + .type = MT_DEVICE + } +}; + +void __init clps711x_map_io(void) +{ + iotable_init(clps711x_io_desc, ARRAY_SIZE(clps711x_io_desc)); +} + +static void int1_mask(struct irq_data *d) +{ + u32 intmr1; + + intmr1 = clps_readl(INTMR1); + intmr1 &= ~(1 << d->irq); + clps_writel(intmr1, INTMR1); +} + +static void int1_eoi(struct irq_data *d) +{ + switch (d->irq) { + case IRQ_CSINT: clps_writel(0, COEOI); break; + case IRQ_TC1OI: clps_writel(0, TC1EOI); break; + case IRQ_TC2OI: clps_writel(0, TC2EOI); break; + case IRQ_RTCMI: clps_writel(0, RTCEOI); break; + case IRQ_TINT: clps_writel(0, TEOI); break; + case IRQ_UMSINT: clps_writel(0, UMSEOI); break; + } +} + +static void int1_unmask(struct irq_data *d) +{ + u32 intmr1; + + intmr1 = clps_readl(INTMR1); + intmr1 |= 1 << d->irq; + clps_writel(intmr1, INTMR1); +} + +static struct irq_chip int1_chip = { + .name = "Interrupt Vector 1", + .irq_eoi = int1_eoi, + .irq_mask = int1_mask, + .irq_unmask = int1_unmask, +}; + +static void int2_mask(struct irq_data *d) +{ + u32 intmr2; + + intmr2 = clps_readl(INTMR2); + intmr2 &= ~(1 << (d->irq - 16)); + clps_writel(intmr2, INTMR2); +} + +static void int2_eoi(struct irq_data *d) +{ + switch (d->irq) { + case IRQ_KBDINT: clps_writel(0, KBDEOI); break; + } +} + +static void int2_unmask(struct irq_data *d) +{ + u32 intmr2; + + intmr2 = clps_readl(INTMR2); + intmr2 |= 1 << (d->irq - 16); + clps_writel(intmr2, INTMR2); +} + +static struct irq_chip int2_chip = { + .name = "Interrupt Vector 2", + .irq_eoi = int2_eoi, + .irq_mask = int2_mask, + .irq_unmask = int2_unmask, +}; + +static void int3_mask(struct irq_data *d) +{ + u32 intmr3; + + intmr3 = clps_readl(INTMR3); + intmr3 &= ~(1 << (d->irq - 32)); + clps_writel(intmr3, INTMR3); +} + +static void int3_unmask(struct irq_data *d) +{ + u32 intmr3; + + intmr3 = clps_readl(INTMR3); + intmr3 |= 1 << (d->irq - 32); + clps_writel(intmr3, INTMR3); +} + +static struct irq_chip int3_chip = { + .name = "Interrupt Vector 3", + .irq_mask = int3_mask, + .irq_unmask = int3_unmask, +}; + +static struct { + int nr; + struct irq_chip *chip; + irq_flow_handler_t handle; +} clps711x_irqdescs[] __initdata = { + { IRQ_CSINT, &int1_chip, handle_fasteoi_irq, }, + { IRQ_EINT1, &int1_chip, handle_level_irq, }, + { IRQ_EINT2, &int1_chip, handle_level_irq, }, + { IRQ_EINT3, &int1_chip, handle_level_irq, }, + { IRQ_TC1OI, &int1_chip, handle_fasteoi_irq, }, + { IRQ_TC2OI, &int1_chip, handle_fasteoi_irq, }, + { IRQ_RTCMI, &int1_chip, handle_fasteoi_irq, }, + { IRQ_TINT, &int1_chip, handle_fasteoi_irq, }, + { IRQ_UTXINT1, &int1_chip, handle_level_irq, }, + { IRQ_URXINT1, &int1_chip, handle_level_irq, }, + { IRQ_UMSINT, &int1_chip, handle_fasteoi_irq, }, + { IRQ_SSEOTI, &int1_chip, handle_level_irq, }, + { IRQ_KBDINT, &int2_chip, handle_fasteoi_irq, }, + { IRQ_SS2RX, &int2_chip, handle_level_irq, }, + { IRQ_SS2TX, &int2_chip, handle_level_irq, }, + { IRQ_UTXINT2, &int2_chip, handle_level_irq, }, + { IRQ_URXINT2, &int2_chip, handle_level_irq, }, +}; + +void __init clps711x_init_irq(void) +{ + unsigned int i; + + /* Disable interrupts */ + clps_writel(0, INTMR1); + clps_writel(0, INTMR2); + clps_writel(0, INTMR3); + + /* Clear down any pending interrupts */ + clps_writel(0, BLEOI); + clps_writel(0, MCEOI); + clps_writel(0, COEOI); + clps_writel(0, TC1EOI); + clps_writel(0, TC2EOI); + clps_writel(0, RTCEOI); + clps_writel(0, TEOI); + clps_writel(0, UMSEOI); + clps_writel(0, KBDEOI); + clps_writel(0, SRXEOF); + clps_writel(0xffffffff, DAISR); + + for (i = 0; i < ARRAY_SIZE(clps711x_irqdescs); i++) { + irq_set_chip_and_handler(clps711x_irqdescs[i].nr, + clps711x_irqdescs[i].chip, + clps711x_irqdescs[i].handle); + set_irq_flags(clps711x_irqdescs[i].nr, + IRQF_VALID | IRQF_PROBE); + } + + if (IS_ENABLED(CONFIG_FIQ)) { + init_FIQ(0); + irq_set_chip_and_handler(IRQ_DAIINT, &int3_chip, + handle_bad_irq); + set_irq_flags(IRQ_DAIINT, + IRQF_VALID | IRQF_PROBE | IRQF_NOAUTOEN); + } +} + +inline u32 fls16(u32 x) +{ + u32 r = 15; + + if (!(x & 0xff00)) { + x <<= 8; + r -= 8; + } + if (!(x & 0xf000)) { + x <<= 4; + r -= 4; + } + if (!(x & 0xc000)) { + x <<= 2; + r -= 2; + } + if (!(x & 0x8000)) + r--; + + return r; +} + +asmlinkage void __exception_irq_entry clps711x_handle_irq(struct pt_regs *regs) +{ + u32 irqstat; + void __iomem *base = CLPS711X_VIRT_BASE; + + irqstat = readl_relaxed(base + INTSR1) & readl_relaxed(base + INTMR1); + if (irqstat) { + handle_IRQ(fls16(irqstat), regs); + return; + } + + irqstat = readl_relaxed(base + INTSR2) & readl_relaxed(base + INTMR2); + if (likely(irqstat)) + handle_IRQ(fls16(irqstat) + 16, regs); +} + +static void clps711x_clockevent_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ +} + +static struct clock_event_device clockevent_clps711x = { + .name = "CLPS711x Clockevents", + .rating = 300, + .features = CLOCK_EVT_FEAT_PERIODIC, + .set_mode = clps711x_clockevent_set_mode, +}; + +static irqreturn_t clps711x_timer_interrupt(int irq, void *dev_id) +{ + clockevent_clps711x.event_handler(&clockevent_clps711x); + + return IRQ_HANDLED; +} + +static struct irqaction clps711x_timer_irq = { + .name = "CLPS711x Timer Tick", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = clps711x_timer_interrupt, +}; + +static void add_fixed_clk(struct clk *clk, const char *name, int rate) +{ + clk = clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate); + clk_register_clkdev(clk, name, NULL); +} + +void __init clps711x_timer_init(void) +{ + int osc, ext, pll, cpu, bus, timl, timh, uart, spi; + u32 tmp; + + osc = 3686400; + ext = 13000000; + + tmp = clps_readl(PLLR) >> 24; + if (tmp) + pll = (osc * tmp) / 2; + else + pll = 73728000; /* Default value */ + + tmp = clps_readl(SYSFLG2); + if (tmp & SYSFLG2_CKMODE) { + cpu = ext; + bus = cpu; + spi = 135400; + } else { + cpu = pll; + if (cpu >= 36864000) + bus = cpu / 2; + else + bus = 36864000 / 2; + spi = cpu / 576; + } + + uart = bus / 10; + + if (tmp & SYSFLG2_CKMODE) { + tmp = clps_readl(SYSCON2); + if (tmp & SYSCON2_OSTB) + timh = ext / 26; + else + timh = 541440; + } else + timh = cpu / 144; + + timl = timh / 256; + + /* All clocks are fixed */ + add_fixed_clk(clk_pll, "pll", pll); + add_fixed_clk(clk_bus, "bus", bus); + add_fixed_clk(clk_uart, "uart", uart); + add_fixed_clk(clk_timerl, "timer_lf", timl); + add_fixed_clk(clk_timerh, "timer_hf", timh); + add_fixed_clk(clk_tint, "tint", 64); + add_fixed_clk(clk_spi, "spi", spi); + + pr_info("CPU frequency set at %i Hz.\n", cpu); + + clps_writew(DIV_ROUND_CLOSEST(timh, HZ), TC2D); + + tmp = clps_readl(SYSCON1); + tmp |= SYSCON1_TC2S | SYSCON1_TC2M; + clps_writel(tmp, SYSCON1); + + clockevents_config_and_register(&clockevent_clps711x, timh, 1, 0xffff); + + setup_irq(IRQ_TC2OI, &clps711x_timer_irq); +} + +void clps711x_restart(char mode, const char *cmd) +{ + soft_restart(0); +} + +static void clps711x_idle(void) +{ + clps_writel(1, HALT); + __asm__ __volatile__( + "mov r0, r0\n\ + mov r0, r0"); +} + +static int __init clps711x_idle_init(void) +{ + arm_pm_idle = clps711x_idle; + return 0; +} + +arch_initcall(clps711x_idle_init); diff --git a/arch/arm/mach-clps711x/common.h b/arch/arm/mach-clps711x/common.h new file mode 100644 index 00000000..f84a7292 --- /dev/null +++ b/arch/arm/mach-clps711x/common.h @@ -0,0 +1,15 @@ +/* + * linux/arch/arm/mach-clps711x/common.h + * + * Common bits. + */ + +#define CLPS711X_NR_IRQS (33) +#define CLPS711X_NR_GPIO (4 * 8 + 3) +#define CLPS711X_GPIO(prt, bit) ((prt) * 8 + (bit)) + +extern void clps711x_map_io(void); +extern void clps711x_init_irq(void); +extern void clps711x_timer_init(void); +extern void clps711x_handle_irq(struct pt_regs *regs); +extern void clps711x_restart(char mode, const char *cmd); diff --git a/arch/arm/mach-clps711x/include/mach/autcpu12.h b/arch/arm/mach-clps711x/include/mach/autcpu12.h new file mode 100644 index 00000000..0452f5f3 --- /dev/null +++ b/arch/arm/mach-clps711x/include/mach/autcpu12.h @@ -0,0 +1,59 @@ +/* + * AUTCPU12 specific defines + * + * (c) 2001 Thomas Gleixner, autronix automation <gleixner@autronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_AUTCPU12_H +#define __ASM_ARCH_AUTCPU12_H + +/* + * The flash bank is wired to chip select 0 + */ +#define AUTCPU12_PHYS_FLASH CS0_PHYS_BASE /* physical */ + +/* offset for device specific information structure */ +#define AUTCPU12_LCDINFO_OFFS (0x00010000) + +/* Videomemory in the internal SRAM (CS 6) */ +#define AUTCPU12_PHYS_VIDEO CS6_PHYS_BASE + +/* +* All special IO's are tied to CS1 +*/ +#define AUTCPU12_PHYS_CHAR_LCD CS1_PHYS_BASE +0x00000000 /* physical */ + +#define AUTCPU12_PHYS_NVRAM CS1_PHYS_BASE +0x02000000 /* physical */ + +#define AUTCPU12_PHYS_CSAUX1 CS1_PHYS_BASE +0x04000000 /* physical */ + +#define AUTCPU12_PHYS_CAN CS1_PHYS_BASE +0x08000000 /* physical */ + +#define AUTCPU12_PHYS_TOUCH CS1_PHYS_BASE +0x0A000000 /* physical */ + +#define AUTCPU12_PHYS_IO CS1_PHYS_BASE +0x0C000000 /* physical */ + +#define AUTCPU12_PHYS_LPT CS1_PHYS_BASE +0x0E000000 /* physical */ + +/* +* defines for lcd contrast +*/ +#define AUTCPU12_DPOT_PORT_OFFSET PEDR +#define AUTCPU12_DPOT_CS (1<<0) +#define AUTCPU12_DPOT_CLK (1<<1) +#define AUTCPU12_DPOT_UD (1<<2) + +#endif diff --git a/arch/arm/mach-clps711x/include/mach/clps711x.h b/arch/arm/mach-clps711x/include/mach/clps711x.h new file mode 100644 index 00000000..01d1b955 --- /dev/null +++ b/arch/arm/mach-clps711x/include/mach/clps711x.h @@ -0,0 +1,304 @@ +/* + * This file contains the hardware definitions of the Cirrus Logic + * ARM7 CLPS711X internal registers. + * + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __MACH_CLPS711X_H +#define __MACH_CLPS711X_H + +#define CLPS711X_PHYS_BASE (0x80000000) + +#define PADR (0x0000) +#define PBDR (0x0001) +#define PCDR (0x0002) +#define PDDR (0x0003) +#define PADDR (0x0040) +#define PBDDR (0x0041) +#define PCDDR (0x0042) +#define PDDDR (0x0043) +#define PEDR (0x0083) +#define PEDDR (0x00c3) +#define SYSCON1 (0x0100) +#define SYSFLG1 (0x0140) +#define MEMCFG1 (0x0180) +#define MEMCFG2 (0x01c0) +#define DRFPR (0x0200) +#define INTSR1 (0x0240) +#define INTMR1 (0x0280) +#define LCDCON (0x02c0) +#define TC1D (0x0300) +#define TC2D (0x0340) +#define RTCDR (0x0380) +#define RTCMR (0x03c0) +#define PMPCON (0x0400) +#define CODR (0x0440) +#define UARTDR1 (0x0480) +#define UBRLCR1 (0x04c0) +#define SYNCIO (0x0500) +#define PALLSW (0x0540) +#define PALMSW (0x0580) +#define STFCLR (0x05c0) +#define BLEOI (0x0600) +#define MCEOI (0x0640) +#define TEOI (0x0680) +#define TC1EOI (0x06c0) +#define TC2EOI (0x0700) +#define RTCEOI (0x0740) +#define UMSEOI (0x0780) +#define COEOI (0x07c0) +#define HALT (0x0800) +#define STDBY (0x0840) + +#define FBADDR (0x1000) +#define SYSCON2 (0x1100) +#define SYSFLG2 (0x1140) +#define INTSR2 (0x1240) +#define INTMR2 (0x1280) +#define UARTDR2 (0x1480) +#define UBRLCR2 (0x14c0) +#define SS2DR (0x1500) +#define SRXEOF (0x1600) +#define SS2POP (0x16c0) +#define KBDEOI (0x1700) + +#define DAIR (0x2000) +#define DAIDR0 (0x2040) +#define DAIDR1 (0x2080) +#define DAIDR2 (0x20c0) +#define DAISR (0x2100) +#define SYSCON3 (0x2200) +#define INTSR3 (0x2240) +#define INTMR3 (0x2280) +#define LEDFLSH (0x22c0) +#define SDCONF (0x2300) +#define SDRFPR (0x2340) +#define UNIQID (0x2440) +#define DAI64FS (0x2600) +#define PLLW (0x2610) +#define PLLR (0xa5a8) +#define RANDID0 (0x2700) +#define RANDID1 (0x2704) +#define RANDID2 (0x2708) +#define RANDID3 (0x270c) + +/* common bits: SYSCON1 / SYSCON2 */ +#define SYSCON_UARTEN (1 << 8) + +#define SYSCON1_KBDSCAN(x) ((x) & 15) +#define SYSCON1_KBDSCANMASK (15) +#define SYSCON1_TC1M (1 << 4) +#define SYSCON1_TC1S (1 << 5) +#define SYSCON1_TC2M (1 << 6) +#define SYSCON1_TC2S (1 << 7) +#define SYSCON1_UART1EN SYSCON_UARTEN +#define SYSCON1_BZTOG (1 << 9) +#define SYSCON1_BZMOD (1 << 10) +#define SYSCON1_DBGEN (1 << 11) +#define SYSCON1_LCDEN (1 << 12) +#define SYSCON1_CDENTX (1 << 13) +#define SYSCON1_CDENRX (1 << 14) +#define SYSCON1_SIREN (1 << 15) +#define SYSCON1_ADCKSEL(x) (((x) & 3) << 16) +#define SYSCON1_ADCKSEL_MASK (3 << 16) +#define SYSCON1_EXCKEN (1 << 18) +#define SYSCON1_WAKEDIS (1 << 19) +#define SYSCON1_IRTXM (1 << 20) + +/* common bits: SYSFLG1 / SYSFLG2 */ +#define SYSFLG_UBUSY (1 << 11) +#define SYSFLG_URXFE (1 << 22) +#define SYSFLG_UTXFF (1 << 23) + +#define SYSFLG1_MCDR (1 << 0) +#define SYSFLG1_DCDET (1 << 1) +#define SYSFLG1_WUDR (1 << 2) +#define SYSFLG1_WUON (1 << 3) +#define SYSFLG1_CTS (1 << 8) +#define SYSFLG1_DSR (1 << 9) +#define SYSFLG1_DCD (1 << 10) +#define SYSFLG1_UBUSY SYSFLG_UBUSY +#define SYSFLG1_NBFLG (1 << 12) +#define SYSFLG1_RSTFLG (1 << 13) +#define SYSFLG1_PFFLG (1 << 14) +#define SYSFLG1_CLDFLG (1 << 15) +#define SYSFLG1_URXFE SYSFLG_URXFE +#define SYSFLG1_UTXFF SYSFLG_UTXFF +#define SYSFLG1_CRXFE (1 << 24) +#define SYSFLG1_CTXFF (1 << 25) +#define SYSFLG1_SSIBUSY (1 << 26) +#define SYSFLG1_ID (1 << 29) +#define SYSFLG1_VERID(x) (((x) >> 30) & 3) +#define SYSFLG1_VERID_MASK (3 << 30) + +#define SYSFLG2_SSRXOF (1 << 0) +#define SYSFLG2_RESVAL (1 << 1) +#define SYSFLG2_RESFRM (1 << 2) +#define SYSFLG2_SS2RXFE (1 << 3) +#define SYSFLG2_SS2TXFF (1 << 4) +#define SYSFLG2_SS2TXUF (1 << 5) +#define SYSFLG2_CKMODE (1 << 6) +#define SYSFLG2_UBUSY SYSFLG_UBUSY +#define SYSFLG2_URXFE SYSFLG_URXFE +#define SYSFLG2_UTXFF SYSFLG_UTXFF + +#define LCDCON_GSEN (1 << 30) +#define LCDCON_GSMD (1 << 31) + +#define SYSCON2_SERSEL (1 << 0) +#define SYSCON2_KBD6 (1 << 1) +#define SYSCON2_DRAMZ (1 << 2) +#define SYSCON2_KBWEN (1 << 3) +#define SYSCON2_SS2TXEN (1 << 4) +#define SYSCON2_PCCARD1 (1 << 5) +#define SYSCON2_PCCARD2 (1 << 6) +#define SYSCON2_SS2RXEN (1 << 7) +#define SYSCON2_UART2EN SYSCON_UARTEN +#define SYSCON2_SS2MAEN (1 << 9) +#define SYSCON2_OSTB (1 << 12) +#define SYSCON2_CLKENSL (1 << 13) +#define SYSCON2_BUZFREQ (1 << 14) + +/* common bits: UARTDR1 / UARTDR2 */ +#define UARTDR_FRMERR (1 << 8) +#define UARTDR_PARERR (1 << 9) +#define UARTDR_OVERR (1 << 10) + +/* common bits: UBRLCR1 / UBRLCR2 */ +#define UBRLCR_BAUD_MASK ((1 << 12) - 1) +#define UBRLCR_BREAK (1 << 12) +#define UBRLCR_PRTEN (1 << 13) +#define UBRLCR_EVENPRT (1 << 14) +#define UBRLCR_XSTOP (1 << 15) +#define UBRLCR_FIFOEN (1 << 16) +#define UBRLCR_WRDLEN5 (0 << 17) +#define UBRLCR_WRDLEN6 (1 << 17) +#define UBRLCR_WRDLEN7 (2 << 17) +#define UBRLCR_WRDLEN8 (3 << 17) +#define UBRLCR_WRDLEN_MASK (3 << 17) + +#define SYNCIO_FRMLEN(x) (((x) & 0x1f) << 8) +#define SYNCIO_SMCKEN (1 << 13) +#define SYNCIO_TXFRMEN (1 << 14) + +#define DAIR_RESERVED (0x0404) +#define DAIR_DAIEN (1 << 16) +#define DAIR_ECS (1 << 17) +#define DAIR_LCTM (1 << 19) +#define DAIR_LCRM (1 << 20) +#define DAIR_RCTM (1 << 21) +#define DAIR_RCRM (1 << 22) +#define DAIR_LBM (1 << 23) + +#define DAIDR2_FIFOEN (1 << 15) +#define DAIDR2_FIFOLEFT (0x0d << 16) +#define DAIDR2_FIFORIGHT (0x11 << 16) + +#define DAISR_RCTS (1 << 0) +#define DAISR_RCRS (1 << 1) +#define DAISR_LCTS (1 << 2) +#define DAISR_LCRS (1 << 3) +#define DAISR_RCTU (1 << 4) +#define DAISR_RCRO (1 << 5) +#define DAISR_LCTU (1 << 6) +#define DAISR_LCRO (1 << 7) +#define DAISR_RCNF (1 << 8) +#define DAISR_RCNE (1 << 9) +#define DAISR_LCNF (1 << 10) +#define DAISR_LCNE (1 << 11) +#define DAISR_FIFO (1 << 12) + +#define DAI64FS_I2SF64 (1 << 0) +#define DAI64FS_AUDIOCLKEN (1 << 1) +#define DAI64FS_AUDIOCLKSRC (1 << 2) +#define DAI64FS_MCLK256EN (1 << 3) +#define DAI64FS_LOOPBACK (1 << 5) + +#define SYSCON3_ADCCON (1 << 0) +#define SYSCON3_CLKCTL0 (1 << 1) +#define SYSCON3_CLKCTL1 (1 << 2) +#define SYSCON3_DAISEL (1 << 3) +#define SYSCON3_ADCCKNSEN (1 << 4) +#define SYSCON3_VERSN(x) (((x) >> 5) & 7) +#define SYSCON3_VERSN_MASK (7 << 5) +#define SYSCON3_FASTWAKE (1 << 8) +#define SYSCON3_DAIEN (1 << 9) +#define SYSCON3_128FS SYSCON3_DAIEN +#define SYSCON3_ENPD67 (1 << 10) + +#define SDCONF_ACTIVE (1 << 10) +#define SDCONF_CLKCTL (1 << 9) +#define SDCONF_WIDTH_4 (0 << 7) +#define SDCONF_WIDTH_8 (1 << 7) +#define SDCONF_WIDTH_16 (2 << 7) +#define SDCONF_WIDTH_32 (3 << 7) +#define SDCONF_SIZE_16 (0 << 5) +#define SDCONF_SIZE_64 (1 << 5) +#define SDCONF_SIZE_128 (2 << 5) +#define SDCONF_SIZE_256 (3 << 5) +#define SDCONF_CASLAT_2 (2) +#define SDCONF_CASLAT_3 (3) + +#define MEMCFG_BUS_WIDTH_32 (1) +#define MEMCFG_BUS_WIDTH_16 (0) +#define MEMCFG_BUS_WIDTH_8 (3) + +#define MEMCFG_SQAEN (1 << 6) +#define MEMCFG_CLKENB (1 << 7) + +#define MEMCFG_WAITSTATE_8_3 (0 << 2) +#define MEMCFG_WAITSTATE_7_3 (1 << 2) +#define MEMCFG_WAITSTATE_6_3 (2 << 2) +#define MEMCFG_WAITSTATE_5_3 (3 << 2) +#define MEMCFG_WAITSTATE_4_2 (4 << 2) +#define MEMCFG_WAITSTATE_3_2 (5 << 2) +#define MEMCFG_WAITSTATE_2_2 (6 << 2) +#define MEMCFG_WAITSTATE_1_2 (7 << 2) +#define MEMCFG_WAITSTATE_8_1 (8 << 2) +#define MEMCFG_WAITSTATE_7_1 (9 << 2) +#define MEMCFG_WAITSTATE_6_1 (10 << 2) +#define MEMCFG_WAITSTATE_5_1 (11 << 2) +#define MEMCFG_WAITSTATE_4_0 (12 << 2) +#define MEMCFG_WAITSTATE_3_0 (13 << 2) +#define MEMCFG_WAITSTATE_2_0 (14 << 2) +#define MEMCFG_WAITSTATE_1_0 (15 << 2) + +/* INTSR1 Interrupts */ +#define IRQ_CSINT (4) +#define IRQ_EINT1 (5) +#define IRQ_EINT2 (6) +#define IRQ_EINT3 (7) +#define IRQ_TC1OI (8) +#define IRQ_TC2OI (9) +#define IRQ_RTCMI (10) +#define IRQ_TINT (11) +#define IRQ_UTXINT1 (12) +#define IRQ_URXINT1 (13) +#define IRQ_UMSINT (14) +#define IRQ_SSEOTI (15) + +/* INTSR2 Interrupts */ +#define IRQ_KBDINT (16 + 0) +#define IRQ_SS2RX (16 + 1) +#define IRQ_SS2TX (16 + 2) +#define IRQ_UTXINT2 (16 + 12) +#define IRQ_URXINT2 (16 + 13) + +/* INTSR3 Interrupts */ +#define IRQ_DAIINT (32 + 0) + +#endif /* __MACH_CLPS711X_H */ diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S new file mode 100644 index 00000000..cb3684f8 --- /dev/null +++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S @@ -0,0 +1,38 @@ +/* arch/arm/mach-clps711x/include/mach/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#include <mach/hardware.h> + + .macro addruart, rp, rv, tmp +#ifndef CONFIG_DEBUG_CLPS711X_UART2 + mov \rp, #0x0000 @ UART1 +#else + mov \rp, #0x1000 @ UART2 +#endif + orr \rv, \rp, #CLPS711X_VIRT_BASE + orr \rp, \rp, #CLPS711X_PHYS_BASE + .endm + + .macro senduart,rd,rx + str \rd, [\rx, #0x0480] @ UARTDR + .endm + + .macro waituart,rd,rx + .endm + + .macro busyuart,rd,rx +1001: ldr \rd, [\rx, #0x0140] @ SYSFLGx + tst \rd, #1 << 11 @ UBUSYx + bne 1001b + .endm + diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h new file mode 100644 index 00000000..2f23dd5d --- /dev/null +++ b/arch/arm/mach-clps711x/include/mach/hardware.h @@ -0,0 +1,80 @@ +/* + * arch/arm/mach-clps711x/include/mach/hardware.h + * + * This file contains the hardware definitions of the Prospector P720T. + * + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __MACH_HARDWARE_H +#define __MACH_HARDWARE_H + +#include <mach/clps711x.h> + +#define IO_ADDRESS(x) (0xdc000000 + (((x) & 0x03ffffff) | \ + (((x) >> 2) & 0x3c000000))) + +#define CLPS711X_VIRT_BASE IOMEM(IO_ADDRESS(CLPS711X_PHYS_BASE)) + +#ifndef __ASSEMBLY__ +#define clps_readb(off) readb(CLPS711X_VIRT_BASE + (off)) +#define clps_readw(off) readw(CLPS711X_VIRT_BASE + (off)) +#define clps_readl(off) readl(CLPS711X_VIRT_BASE + (off)) +#define clps_writeb(val,off) writeb(val, CLPS711X_VIRT_BASE + (off)) +#define clps_writew(val,off) writew(val, CLPS711X_VIRT_BASE + (off)) +#define clps_writel(val,off) writel(val, CLPS711X_VIRT_BASE + (off)) +#endif + +/* + * The physical addresses that the external chip select signals map to is + * dependent on the setting of the nMEDCHG signal on EP7211 and EP7212 + * processors. CONFIG_EP72XX_BOOT_ROM is only available if these + * processors are in use. + */ +#ifndef CONFIG_EP72XX_ROM_BOOT +#define CS0_PHYS_BASE (0x00000000) +#define CS1_PHYS_BASE (0x10000000) +#define CS2_PHYS_BASE (0x20000000) +#define CS3_PHYS_BASE (0x30000000) +#define CS4_PHYS_BASE (0x40000000) +#define CS5_PHYS_BASE (0x50000000) +#define CS6_PHYS_BASE (0x60000000) +#define CS7_PHYS_BASE (0x70000000) +#else +#define CS0_PHYS_BASE (0x70000000) +#define CS1_PHYS_BASE (0x60000000) +#define CS2_PHYS_BASE (0x50000000) +#define CS3_PHYS_BASE (0x40000000) +#define CS4_PHYS_BASE (0x30000000) +#define CS5_PHYS_BASE (0x20000000) +#define CS6_PHYS_BASE (0x10000000) +#define CS7_PHYS_BASE (0x00000000) +#endif + +#define CLPS711X_SRAM_BASE CS6_PHYS_BASE +#define CLPS711X_SRAM_SIZE (48 * 1024) + +#define CLPS711X_SDRAM0_BASE (0xc0000000) +#define CLPS711X_SDRAM1_BASE (0xd0000000) + +#if defined (CONFIG_ARCH_EDB7211) + +/* The extra 8 lines of the keyboard matrix are wired to chip select 3 */ +#define EP7211_PHYS_EXTKBD CS3_PHYS_BASE + +#endif /* CONFIG_ARCH_EDB7211 */ + +#endif diff --git a/arch/arm/mach-clps711x/include/mach/memory.h b/arch/arm/mach-clps711x/include/mach/memory.h new file mode 100644 index 00000000..fc0e028d --- /dev/null +++ b/arch/arm/mach-clps711x/include/mach/memory.h @@ -0,0 +1,41 @@ +/* + * arch/arm/mach-clps711x/include/mach/memory.h + * + * Copyright (C) 1999 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +/* + * Physical DRAM offset. + */ +#define PLAT_PHYS_OFFSET UL(0xc0000000) + +/* + * The PS7211 allows up to 256MB max per DRAM bank, but the EDB7211 + * uses only one of the two banks (bank #1). However, even within + * bank #1, memory is discontiguous. + * + * The EDB7211 has two 8MB DRAM areas with 8MB of empty space between + * them, so we use 24 for the node max shift to get 16MB node sizes. + */ + +#define SECTION_SIZE_BITS 24 +#define MAX_PHYSMEM_BITS 32 + +#endif + diff --git a/arch/arm/mach-clps711x/include/mach/syspld.h b/arch/arm/mach-clps711x/include/mach/syspld.h new file mode 100644 index 00000000..9a433155 --- /dev/null +++ b/arch/arm/mach-clps711x/include/mach/syspld.h @@ -0,0 +1,116 @@ +/* + * arch/arm/mach-clps711x/include/mach/syspld.h + * + * System Control PLD register definitions. + * + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_SYSPLD_H +#define __ASM_ARCH_SYSPLD_H + +#define SYSPLD_PHYS_BASE (0x10000000) +#define SYSPLD_VIRT_BASE IO_ADDRESS(SYSPLD_PHYS_BASE) + +#define SYSPLD_REG(type, off) (*(volatile type *)(SYSPLD_VIRT_BASE + (off))) + +#define PLD_INT SYSPLD_REG(u32, 0x000000) +#define PLD_INT_PENIRQ (1 << 5) +#define PLD_INT_UCB_IRQ (1 << 1) +#define PLD_INT_KBD_ATN (1 << 0) /* EINT1 */ + +#define PLD_PWR SYSPLD_REG(u32, 0x000004) +#define PLD_PWR_EXT (1 << 5) +#define PLD_PWR_MODE (1 << 4) /* 1 = PWM, 0 = PFM */ +#define PLD_S4_ON (1 << 3) /* LCD bias voltage enable */ +#define PLD_S3_ON (1 << 2) /* LCD backlight enable */ +#define PLD_S2_ON (1 << 1) /* LCD 3V3 supply enable */ +#define PLD_S1_ON (1 << 0) /* LCD 3V supply enable */ + +#define PLD_KBD SYSPLD_REG(u32, 0x000008) +#define PLD_KBD_WAKE (1 << 1) +#define PLD_KBD_EN (1 << 0) + +#define PLD_SPI SYSPLD_REG(u32, 0x00000c) +#define PLD_SPI_EN (1 << 0) + +#define PLD_IO SYSPLD_REG(u32, 0x000010) +#define PLD_IO_BOOTSEL (1 << 6) /* boot sel switch */ +#define PLD_IO_USER (1 << 5) /* user defined switch */ +#define PLD_IO_LED3 (1 << 4) +#define PLD_IO_LED2 (1 << 3) +#define PLD_IO_LED1 (1 << 2) +#define PLD_IO_LED0 (1 << 1) +#define PLD_IO_LEDEN (1 << 0) + +#define PLD_IRDA SYSPLD_REG(u32, 0x000014) +#define PLD_IRDA_EN (1 << 0) + +#define PLD_COM2 SYSPLD_REG(u32, 0x000018) +#define PLD_COM2_EN (1 << 0) + +#define PLD_COM1 SYSPLD_REG(u32, 0x00001c) +#define PLD_COM1_EN (1 << 0) + +#define PLD_AUD SYSPLD_REG(u32, 0x000020) +#define PLD_AUD_DIV1 (1 << 6) +#define PLD_AUD_DIV0 (1 << 5) +#define PLD_AUD_CLK_SEL1 (1 << 4) +#define PLD_AUD_CLK_SEL0 (1 << 3) +#define PLD_AUD_MIC_PWR (1 << 2) +#define PLD_AUD_MIC_GAIN (1 << 1) +#define PLD_AUD_CODEC_EN (1 << 0) + +#define PLD_CF SYSPLD_REG(u32, 0x000024) +#define PLD_CF2_SLEEP (1 << 5) +#define PLD_CF1_SLEEP (1 << 4) +#define PLD_CF2_nPDREQ (1 << 3) +#define PLD_CF1_nPDREQ (1 << 2) +#define PLD_CF2_nIRQ (1 << 1) +#define PLD_CF1_nIRQ (1 << 0) + +#define PLD_SDC SYSPLD_REG(u32, 0x000028) +#define PLD_SDC_INT_EN (1 << 2) +#define PLD_SDC_WP (1 << 1) +#define PLD_SDC_CD (1 << 0) + +#define PLD_FPGA SYSPLD_REG(u32, 0x00002c) + +#define PLD_CODEC SYSPLD_REG(u32, 0x400000) +#define PLD_CODEC_IRQ3 (1 << 4) +#define PLD_CODEC_IRQ2 (1 << 3) +#define PLD_CODEC_IRQ1 (1 << 2) +#define PLD_CODEC_EN (1 << 0) + +#define PLD_BRITE SYSPLD_REG(u32, 0x400004) +#define PLD_BRITE_UP (1 << 1) +#define PLD_BRITE_DN (1 << 0) + +#define PLD_LCDEN SYSPLD_REG(u32, 0x400008) +#define PLD_LCDEN_EN (1 << 0) + +#define PLD_ID SYSPLD_REG(u32, 0x40000c) + +#define PLD_TCH SYSPLD_REG(u32, 0x400010) +#define PLD_TCH_PENIRQ (1 << 1) +#define PLD_TCH_EN (1 << 0) + +#define PLD_GPIO SYSPLD_REG(u32, 0x400014) +#define PLD_GPIO2 (1 << 2) +#define PLD_GPIO1 (1 << 1) +#define PLD_GPIO0 (1 << 0) + +#endif diff --git a/arch/arm/mach-clps711x/include/mach/timex.h b/arch/arm/mach-clps711x/include/mach/timex.h new file mode 100644 index 00000000..de6fd192 --- /dev/null +++ b/arch/arm/mach-clps711x/include/mach/timex.h @@ -0,0 +1,2 @@ +/* Bogus value */ +#define CLOCK_TICK_RATE 512000 diff --git a/arch/arm/mach-clps711x/include/mach/uncompress.h b/arch/arm/mach-clps711x/include/mach/uncompress.h new file mode 100644 index 00000000..5f02d06d --- /dev/null +++ b/arch/arm/mach-clps711x/include/mach/uncompress.h @@ -0,0 +1,55 @@ +/* + * arch/arm/mach-clps711x/include/mach/uncompress.h + * + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <mach/clps711x.h> + +#ifdef CONFIG_DEBUG_CLPS711X_UART2 +#define SYSFLGx SYSFLG2 +#define UARTDRx UARTDR2 +#else +#define SYSFLGx SYSFLG1 +#define UARTDRx UARTDR1 +#endif + +#define phys_reg(x) (*(volatile u32 *)(CLPS711X_PHYS_BASE + (x))) + +/* + * The following code assumes the serial port has already been + * initialized by the bootloader. If you didn't setup a port in + * your bootloader then nothing will appear (which might be desired). + * + * This does not append a newline + */ +static inline void putc(int c) +{ + while (phys_reg(SYSFLGx) & SYSFLG_UTXFF) + barrier(); + phys_reg(UARTDRx) = c; +} + +static inline void flush(void) +{ + while (phys_reg(SYSFLGx) & SYSFLG_UBUSY) + barrier(); +} + +/* + * nothing to do + */ +#define arch_decomp_setup() |