Initial file dump from open source releaseHEADmaster

1 files changed, 336 insertions, 0 deletions

diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig
new file mode 100644
index 00000000..23dfd4a3
--- /dev/null
+++ b/net/ipv4/netfilter/Kconfig
@@ -0,0 +1,336 @@
+#
+# IP netfilter configuration
+#
+
+menu "IP: Netfilter Configuration"
+	depends on INET && NETFILTER
+
+config NF_DEFRAG_IPV4
+	tristate
+	default n
+
+config NF_CONNTRACK_IPV4
+	tristate "IPv4 connection tracking support (required for NAT)"
+	depends on NF_CONNTRACK
+	default m if NETFILTER_ADVANCED=n
+	select NF_DEFRAG_IPV4
+	---help---
+	  Connection tracking keeps a record of what packets have passed
+	  through your machine, in order to figure out how they are related
+	  into connections.
+
+	  This is IPv4 support on Layer 3 independent connection tracking.
+	  Layer 3 independent connection tracking is experimental scheme
+	  which generalize ip_conntrack to support other layer 3 protocols.
+
+	  To compile it as a module, choose M here.  If unsure, say N.
+
+config NF_CONNTRACK_PROC_COMPAT
+	bool "proc/sysctl compatibility with old connection tracking"
+	depends on NF_CONNTRACK_PROCFS && NF_CONNTRACK_IPV4
+	default y
+	help
+	  This option enables /proc and sysctl compatibility with the old
+	  layer 3 dependent connection tracking. This is needed to keep
+	  old programs that have not been adapted to the new names working.
+
+	  If unsure, say Y.
+
+config IP_NF_IPTABLES
+	tristate "IP tables support (required for filtering/masq/NAT)"
+	default m if NETFILTER_ADVANCED=n
+	select NETFILTER_XTABLES
+	help
+	  iptables is a general, extensible packet identification framework.
+	  The packet filtering and full NAT (masquerading, port forwarding,
+	  etc) subsystems now use this: say `Y' or `M' here if you want to use
+	  either of those.
+
+	  To compile it as a module, choose M here.  If unsure, say N.
+
+if IP_NF_IPTABLES
+
+# The matches.
+config IP_NF_MATCH_AH
+	tristate '"ah" match support'
+	depends on NETFILTER_ADVANCED
+	help
+	  This match extension allows you to match a range of SPIs
+	  inside AH header of IPSec packets.
+
+	  To compile it as a module, choose M here.  If unsure, say N.
+
+config IP_NF_MATCH_ECN
+	tristate '"ecn" match support'
+	depends on NETFILTER_ADVANCED
+	select NETFILTER_XT_MATCH_ECN
+	---help---
+	This is a backwards-compat option for the user's convenience
+	(e.g. when running oldconfig). It selects
+	CONFIG_NETFILTER_XT_MATCH_ECN.
+
+config IP_NF_MATCH_RPFILTER
+	tristate '"rpfilter" reverse path filter match support'
+	depends on NETFILTER_ADVANCED && (IP_NF_MANGLE || IP_NF_RAW)
+	---help---
+	  This option allows you to match packets whose replies would
+	  go out via the interface the packet came in.
+
+	  To compile it as a module, choose M here.  If unsure, say N.
+	  The module will be called ipt_rpfilter.
+
+config IP_NF_MATCH_TTL
+	tristate '"ttl" match support'
+	depends on NETFILTER_ADVANCED
+	select NETFILTER_XT_MATCH_HL
+	---help---
+	This is a backwards-compat option for the user's convenience
+	(e.g. when running oldconfig). It selects
+	CONFIG_NETFILTER_XT_MATCH_HL.
+
+# `filter', generic and specific targets
+config IP_NF_FILTER
+	tristate "Packet filtering"
+	default m if NETFILTER_ADVANCED=n
+	help
+	  Packet filtering defines a table `filter', which has a series of
+	  rules for simple packet filtering at local input, forwarding and
+	  local output.  See the man page for iptables(8).
+
+	  To compile it as a module, choose M here.  If unsure, say N.
+
+config IP_NF_TARGET_REJECT
+	tristate "REJECT target support"
+	depends on IP_NF_FILTER
+	default m if NETFILTER_ADVANCED=n
+	help
+	  The REJECT target allows a filtering rule to specify that an ICMP
+	  error should be issued in response to an incoming packet, rather
+	  than silently being dropped.
+
+	  To compile it as a module, choose M here.  If unsure, say N.
+
+config IP_NF_TARGET_REJECT_SKERR
+	bool "Force socket error when rejecting with icmp*"
+	depends on IP_NF_TARGET_REJECT
+	default n
+	help
+          This option enables turning a "--reject-with icmp*" into a matching
+          socket error also.
+	  The REJECT target normally allows sending an ICMP message. But it
+          leaves the local socket unaware of any ingress rejects.
+
+	  If unsure, say N.
+
+config IP_NF_TARGET_ULOG
+	tristate "ULOG target support"
+	default m if NETFILTER_ADVANCED=n
+	---help---
+
+	  This option enables the old IPv4-only "ipt_ULOG" implementation
+	  which has been obsoleted by the new "nfnetlink_log" code (see
+	  CONFIG_NETFILTER_NETLINK_LOG).
+
+	  This option adds a `ULOG' target, which allows you to create rules in
+	  any iptables table. The packet is passed to a userspace logging
+	  daemon using netlink multicast sockets; unlike the LOG target
+	  which can only be viewed through syslog.
+
+	  The appropriate userspace logging daemon (ulogd) may be obtained from
+	  <http://www.netfilter.org/projects/ulogd/index.html>
+
+	  To compile it as a module, choose M here.  If unsure, say N.
+
+# NAT + specific targets: nf_conntrack
+config NF_NAT_IPV4
+	tristate "IPv4 NAT"
+	depends on NF_CONNTRACK_IPV4
+	default m if NETFILTER_ADVANCED=n
+	select NF_NAT
+	help
+	  The IPv4 NAT option allows masquerading, port forwarding and other
+	  forms of full Network Address Port Translation.  It is controlled by
+	  the `nat' table in iptables: see the man page for iptables(8).
+
+	  To compile it as a module, choose M here.  If unsure, say N.
+
+if NF_NAT_IPV4
+
+config IP_NF_TARGET_MASQUERADE
+	tristate "MASQUERADE target support"
+	default m if NETFILTER_ADVANCED=n
+	help
+	  Masquerading is a special case of NAT: all outgoing connections are
+	  changed to seem to come from a particular interface's address, and
+	  if the interface goes down, those connections are lost.  This is
+	  only useful for dialup accounts with dynamic IP address (ie. your IP
+	  address will be different on next dialup).
+
+	  To compile it as a module, choose M here.  If unsure, say N.
+
+config IP_NF_TARGET_NETMAP
+	tristate "NETMAP target support"
+	depends on NETFILTER_ADVANCED
+	select NETFILTER_XT_TARGET_NETMAP
+	---help---
+	This is a backwards-compat option for the user's convenience
+	(e.g. when running oldconfig). It selects
+	CONFIG_NETFILTER_XT_TARGET_NETMAP.
+
+config IP_NF_TARGET_REDIRECT
+	tristate "REDIRECT target support"
+	depends on NETFILTER_ADVANCED
+	select NETFILTER_XT_TARGET_REDIRECT
+	---help---
+	This is a backwards-compat option for the user's convenience
+	(e.g. when running oldconfig). It selects
+	CONFIG_NETFILTER_XT_TARGET_REDIRECT.
+
+endif
+
+config NF_NAT_SNMP_BASIC
+	tristate "Basic SNMP-ALG support"
+	depends on NF_CONNTRACK_SNMP && NF_NAT_IPV4
+	depends on NETFILTER_ADVANCED
+	default NF_NAT && NF_CONNTRACK_SNMP
+	---help---
+
+	  This module implements an Application Layer Gateway (ALG) for
+	  SNMP payloads.  In conjunction with NAT, it allows a network
+	  management system to access multiple private networks with
+	  conflicting addresses.  It works by modifying IP addresses
+	  inside SNMP payloads to match IP-layer NAT mapping.
+
+	  This is the "basic" form of SNMP-ALG, as described in RFC 2962
+
+	  To compile it as a module, choose M here.  If unsure, say N.
+
+# If they want FTP, set to $CONFIG_IP_NF_NAT (m or y),
+# or $CONFIG_IP_NF_FTP (m or y), whichever is weaker.
+# From kconfig-language.txt:
+#
+#           <expr> '&&' <expr>                   (6)
+#
+# (6) Returns the result of min(/expr/, /expr/).
+
+config NF_NAT_PROTO_GRE
+	tristate
+	depends on NF_NAT_IPV4 && NF_CT_PROTO_GRE
+
+config NF_NAT_PPTP
+	tristate
+	depends on NF_CONNTRACK && NF_NAT_IPV4
+	default NF_NAT_IPV4 && NF_CONNTRACK_PPTP
+	select NF_NAT_PROTO_GRE
+
+config NF_NAT_H323
+	tristate
+	depends on NF_CONNTRACK && NF_NAT_IPV4
+	default NF_NAT_IPV4 && NF_CONNTRACK_H323
+
+# mangle + specific targets
+config IP_NF_MANGLE
+	tristate "Packet mangling"
+	default m if NETFILTER_ADVANCED=n
+	help
+	  This option adds a `mangle' table to iptables: see the man page for
+	  iptables(8).  This table is used for various packet alterations
+	  which can effect how the packet is routed.
+
+	  To compile it as a module, choose M here.  If unsure, say N.
+
+config IP_NF_TARGET_CLUSTERIP
+	tristate "CLUSTERIP target support"
+	depends on IP_NF_MANGLE
+	depends on NF_CONNTRACK_IPV4
+	depends on NETFILTER_ADVANCED
+	select NF_CONNTRACK_MARK
+	help
+	  The CLUSTERIP target allows you to build load-balancing clusters of
+	  network servers without having a dedicated load-balancing
+	  router/server/switch.
+	
+	  To compile it as a module, choose M here.  If unsure, say N.
+
+config IP_NF_TARGET_ECN
+	tristate "ECN target support"
+	depends on IP_NF_MANGLE
+	depends on NETFILTER_ADVANCED
+	---help---
+	  This option adds a `ECN' target, which can be used in the iptables mangle
+	  table.  
+
+	  You can use this target to remove the ECN bits from the IPv4 header of
+	  an IP packet.  This is particularly useful, if you need to work around
+	  existing ECN blackholes on the internet, but don't want to disable
+	  ECN support in general.
+
+	  To compile it as a module, choose M here.  If unsure, say N.
+
+config IP_NF_TARGET_TTL
+	tristate '"TTL" target support'
+	depends on NETFILTER_ADVANCED && IP_NF_MANGLE
+	select NETFILTER_XT_TARGET_HL
+	---help---
+	This is a backwards-compatible option for the user's convenience
+	(e.g. when running oldconfig). It selects
+	CONFIG_NETFILTER_XT_TARGET_HL.
+
+# raw + specific targets
+config IP_NF_RAW
+	tristate  'raw table support (required for NOTRACK/TRACE)'
+	help
+	  This option adds a `raw' table to iptables. This table is the very
+	  first in the netfilter framework and hooks in at the PREROUTING
+	  and OUTPUT chains.
+	
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/kbuild/modules.txt>.  If unsure, say `N'.
+
+# security table for MAC policy
+config IP_NF_SECURITY
+	tristate "Security table"
+	depends on SECURITY
+	depends on NETFILTER_ADVANCED
+	help
+	  This option adds a `security' table to iptables, for use
+	  with Mandatory Access Control (MAC) policy.
+	 
+	  If unsure, say N.
+
+endif # IP_NF_IPTABLES
+
+# ARP tables
+config IP_NF_ARPTABLES
+	tristate "ARP tables support"
+	select NETFILTER_XTABLES
+	depends on NETFILTER_ADVANCED
+	help
+	  arptables is a general, extensible packet identification framework.
+	  The ARP packet filtering and mangling (manipulation)subsystems
+	  use this: say Y or M here if you want to use either of those.
+
+	  To compile it as a module, choose M here.  If unsure, say N.
+
+if IP_NF_ARPTABLES
+
+config IP_NF_ARPFILTER
+	tristate "ARP packet filtering"
+	help
+	  ARP packet filtering defines a table `filter', which has a series of
+	  rules for simple ARP packet filtering at local input and
+	  local output.  On a bridge, you can also specify filtering rules
+	  for forwarded ARP packets. See the man page for arptables(8).
+
+	  To compile it as a module, choose M here.  If unsure, say N.
+
+config IP_NF_ARP_MANGLE
+	tristate "ARP payload mangling"
+	help
+	  Allows altering the ARP packet payload: source and destination
+	  hardware and network addresses.
+
+endif # IP_NF_ARPTABLES
+
+endmenu
+