Initial file dump from open source releaseHEADmaster

1 files changed, 178 insertions, 0 deletions

diff --git a/drivers/video/sprdfb/spi/spi_simple_drv.h b/drivers/video/sprdfb/spi/spi_simple_drv.h
new file mode 100644
index 00000000..07019387
--- /dev/null
+++ b/drivers/video/sprdfb/spi/spi_simple_drv.h
@@ -0,0 +1,178 @@
+#ifndef _SPI_TEST_H
+#define _SPI_TEST_H
+
+#include <linux/kernel.h>
+
+#define SPI0_ID        0
+#define SPI1_ID        1
+#define SPI2_ID        2
+#define SPI_USED_ID    SPI2_ID
+
+#define CHN_SPI_INT			9
+#define DMA_SPI_TX			0x13
+
+#define SPI_TX_FIFO_DEPTH 		16
+#define SPI_RX_FIFO_DEPTH 		16
+#define SPI_INT_DIS_ALL		0
+#define SPI_RX_FULL_INT_EN		BIT_6
+#define SPI_RX_FULL_INT_STS 	BIT_6
+#define SPI_RX_FULL_INT_CLR 	BIT_0
+#define SPI_RX_FIFO_REAL_EMPTY	BIT_5
+#define SPI_S8_MODE_EN			BIT_7
+#define SPI_CD_SEL				0x2	//cs1 is sel as cd signal
+
+/*
+   Define the SPI interface mode for LCM
+ */
+#define  SPIMODE_DISABLE           0
+#define  SPIMODE_3WIRE_9BIT_SDA    1  // 3 wire 9 bit, cd bit, SDI/SDO share  one IO
+#define  SPIMODE_3WIRE_9BIT_SDIO   2  // 3 wire 9 bit, cd bit, SDI, SDO
+#define  SPIMODE_4WIRE_8BIT_SDA    3  // 4 wire 8 bit, cd pin, SDI/SDO share one IO
+#define  SPIMODE_4WIRE_8BIT_SDIO   4  // 4 wire 8 bit, cd pin, SDI, SDO
+
+/*
+   Define the clk src for SPI mode
+ */
+#define SPICLK_SEL_192M    0
+#define SPICLK_SEL_154M    1
+#define SPICLK_SEL_96M   2
+#define SPICLK_SEL_26M    3
+
+/*
+   SPI CS sel in master mode
+ */
+#define SPI_SEL_CS0 0x0E  //2'B1110
+#define SPI_SEL_CS1 0x0D  //2'B1101
+#define SPI_SEL_CS2 0x0B  //2'B1011
+#define SPI_SEL_CS3 0x07  //2'B0111
+
+#define TX_MAX_LEN_MASK     0xFFFFF
+#define TX_DUMY_LEN_MASK    0x3F    //[09:04]
+#define TX_DATA_LEN_H_MASK  0x0F    //[03:00]
+#define TX_DATA_LEN_L_MASK  0xFFFF  //[15:00]
+#define SPI_MODE_SHIFT    3
+#define SPI_MODE_MASK     (0x07<<SPI_MODE_SHIFT)
+#define SPI_CD_MASK  BIT(15)
+#define SPI_SEL_CS_SHIFT 8
+
+#define SPI_DEF_SRC_CLK (26 * 1000 *1000)
+#define SPI_DEF_CLK (13 * 1000 * 1000)
+
+typedef enum
+{
+	TX_POS_EDGE = 0,
+	TX_NEG_EDGE
+}TX_EDGE;
+
+typedef enum
+{
+	RX_POS_EDGE = 0,
+	RX_NEG_EDGE
+}RX_EDGE;
+
+typedef enum
+{
+	TX_RX_MSB = 0,
+	TX_RX_LSB
+}MSB_LSB_SEL;
+
+typedef enum
+{
+	IDLE_MODE = 0,
+	RX_MODE,
+	TX_MODE,
+	RX_TX_MODE
+}TRANCIEVE_MODE;
+
+typedef enum
+{
+	NO_SWITCH    = 0,
+	BYTE_SWITCH  = 1,
+	HWORD_SWITCH = 2
+}SWT_MODE;
+
+typedef enum
+{
+	MASTER_MODE = 0,
+	SLAVE_MODE = 1
+}SPI_OPERATE_MODE_E;
+
+typedef enum
+{
+	DMA_DISABLE = 0,
+	DMA_ENABLE
+}DMA_EN;
+
+typedef enum
+{
+	CS_LOW = 0,
+	CS_HIGH
+}CS_SIGNAL;
+
+#define SW_RX_REQ_MASK BIT(0)
+#define SW_TX_REQ_MASK BIT(1)
+#define RX_MAX_LEN_MASK     0xFFFFFF
+#define RX_DUMY_LEN_MASK    0x3F
+#define RX_DATA_LEN_H_MASK  0x0F
+#define RX_DATA_LEN_L_MASK  0xFFFF
+
+typedef struct _init_param
+{
+	TX_EDGE tx_edge;
+	RX_EDGE rx_edge;
+	MSB_LSB_SEL msb_lsb_sel;
+	TRANCIEVE_MODE tx_rx_mode;
+	SWT_MODE switch_mode;
+	SPI_OPERATE_MODE_E op_mode;
+	uint32_t DMAsrcSize;
+	uint32_t DMAdesSize;
+	uint32_t clk_div;
+	uint8_t data_width;
+	uint8_t tx_empty_watermark;
+	uint8_t tx_full_watermark;
+	uint8_t rx_empty_watermark;
+	uint8_t rx_full_watermark;
+}SPI_INIT_PARM,*SPI_INIT_PARM_P;
+
+typedef struct
+{
+	uint32_t data;				// Transmit word or Receive word
+	uint32_t clkd;				// clock dividor register
+	uint32_t ctl0;				// control register
+	uint32_t ctl1;				// Receive Data full threshold/Receive Data full threshold
+	uint32_t ctl2;				// 2-wire mode reigster
+	uint32_t ctl3;				// transmit data interval
+	uint32_t ctl4;				// transmit data interval
+	uint32_t ctl5;				// transmit data interval
+	uint32_t ien;				// interrutp enable register
+	uint32_t iclr;				// interrupt clear register
+	uint32_t iraw;				// interrupt clear register
+	uint32_t ists;				// interrupt clear register
+	uint32_t sts1;				// fifo cnt register, bit[5:0] for RX and [13:8] for TX
+	uint32_t sts2;				// masked interrupt status register
+	uint32_t dsp_wait;   		// Used for DSP control
+	uint32_t sts3;				// tx_empty_threshold and tx_full_threshold
+	uint32_t ctl6;
+	uint32_t sts4;
+	uint32_t fifo_rst;
+	uint32_t ctl7;               // SPI_RX_HLD_EN : SPI_TX_HLD_EN : SPI_MODE
+	uint32_t sts5;               // CSN_IN_ERR_SYNC2
+	uint32_t ctl8;               // SPI_CD_BIT : SPI_TX_DUMY_LEN : SPI_TX_DATA_LEN_H
+	uint32_t ctl9;               // SPI_TX_DATA_LEN_L
+	uint32_t ctl10;              // SPI_RX_DATA_LEN_H : SPI_RX_DUMY_LEN
+	uint32_t ctl11;              // SPI_RX_DATA_LEN_L
+	uint32_t ctl12;              // SW_TX_REQ : SW_RX_REQ
+} SPI_CTL_REG_T;
+
+void SPI_SetCsLow( uint32_t spi_sel_csx , bool is_low);
+void SPI_SetCd( uint32_t cd);
+void SPI_SetDatawidth(uint32_t datawidth);
+#ifdef CONFIG_OF
+void SPI_Init(struct device *device, u32 spi_id, SPI_INIT_PARM *spi_parm);
+#else
+void SPI_Init(u32 spi_id, SPI_INIT_PARM *spi_parm);
+#endif
+void SPI_WriteData(uint32_t data, uint32_t data_len, uint32_t dummy_bitlen);
+uint32_t SPI_ReadData( uint32_t data_len, uint32_t dummy_bitlen );
+
+#endif /*_SPI_TEST_H*/