Initial file dump from open source releaseHEADmaster

1 files changed, 2550 insertions, 0 deletions

diff --git a/drivers/usb/gadget/dwc_otg/dwc_otg_regs.h b/drivers/usb/gadget/dwc_otg/dwc_otg_regs.h
new file mode 100644
index 00000000..105ba1ba
--- /dev/null
+++ b/drivers/usb/gadget/dwc_otg/dwc_otg_regs.h
@@ -0,0 +1,2550 @@
+/* ==========================================================================
+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_regs.h $
+ * $Revision: #98 $
+ * $Date: 2012/08/10 $
+ * $Change: 2047372 $
+ *
+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
+ * otherwise expressly agreed to in writing between Synopsys and you.
+ *
+ * The Software IS NOT an item of Licensed Software or Licensed Product under
+ * any End User Software License Agreement or Agreement for Licensed Product
+ * with Synopsys or any supplement thereto. You are permitted to use and
+ * redistribute this Software in source and binary forms, with or without
+ * modification, provided that redistributions of source code must retain this
+ * notice. You may not view, use, disclose, copy or distribute this file or
+ * any information contained herein except pursuant to this license grant from
+ * Synopsys. If you do not agree with this notice, including the disclaimer
+ * below, then you are not authorized to use the Software.
+ *
+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ * ========================================================================== */
+
+#ifndef __DWC_OTG_REGS_H__
+#define __DWC_OTG_REGS_H__
+
+#include "dwc_otg_core_if.h"
+
+/**
+ * @file
+ *
+ * This file contains the data structures for accessing the DWC_otg core registers.
+ *
+ * The application interfaces with the HS OTG core by reading from and
+ * writing to the Control and Status Register (CSR) space through the
+ * AHB Slave interface. These registers are 32 bits wide, and the
+ * addresses are 32-bit-block aligned.
+ * CSRs are classified as follows:
+ * - Core Global Registers
+ * - Device Mode Registers
+ * - Device Global Registers
+ * - Device Endpoint Specific Registers
+ * - Host Mode Registers
+ * - Host Global Registers
+ * - Host Port CSRs
+ * - Host Channel Specific Registers
+ *
+ * Only the Core Global registers can be accessed in both Device and
+ * Host modes. When the HS OTG core is operating in one mode, either
+ * Device or Host, the application must not access registers from the
+ * other mode. When the core switches from one mode to another, the
+ * registers in the new mode of operation must be reprogrammed as they
+ * would be after a power-on reset.
+ */
+
+/****************************************************************************/
+/** DWC_otg Core registers . 
+ * The dwc_otg_core_global_regs structure defines the size
+ * and relative field offsets for the Core Global registers.
+ */
+typedef struct dwc_otg_core_global_regs {
+	/** OTG Control and Status Register.  <i>Offset: 000h</i> */
+	volatile uint32_t gotgctl;
+	/** OTG Interrupt Register.	 <i>Offset: 004h</i> */
+	volatile uint32_t gotgint;
+	/**Core AHB Configuration Register.	 <i>Offset: 008h</i> */
+	volatile uint32_t gahbcfg;
+
+#define DWC_GLBINTRMASK		0x0001
+#define DWC_DMAENABLE		0x0020
+#define DWC_NPTXEMPTYLVL_EMPTY	0x0080
+#define DWC_NPTXEMPTYLVL_HALFEMPTY	0x0000
+#define DWC_PTXEMPTYLVL_EMPTY	0x0100
+#define DWC_PTXEMPTYLVL_HALFEMPTY	0x0000
+
+	/**Core USB Configuration Register.	 <i>Offset: 00Ch</i> */
+	volatile uint32_t gusbcfg;
+	/**Core Reset Register.	 <i>Offset: 010h</i> */
+	volatile uint32_t grstctl;
+	/**Core Interrupt Register.	 <i>Offset: 014h</i> */
+	volatile uint32_t gintsts;
+	/**Core Interrupt Mask Register.  <i>Offset: 018h</i> */
+	volatile uint32_t gintmsk;
+	/**Receive Status Queue Read Register (Read Only).	<i>Offset: 01Ch</i> */
+	volatile uint32_t grxstsr;
+	/**Receive Status Queue Read & POP Register (Read Only).  <i>Offset: 020h</i>*/
+	volatile uint32_t grxstsp;
+	/**Receive FIFO Size Register.	<i>Offset: 024h</i> */
+	volatile uint32_t grxfsiz;
+	/**Non Periodic Transmit FIFO Size Register.  <i>Offset: 028h</i> */
+	volatile uint32_t gnptxfsiz;
+	/**Non Periodic Transmit FIFO/Queue Status Register (Read
+	 * Only). <i>Offset: 02Ch</i> */
+	volatile uint32_t gnptxsts;
+	/**I2C Access Register.	 <i>Offset: 030h</i> */
+	volatile uint32_t gi2cctl;
+	/**PHY Vendor Control Register.	 <i>Offset: 034h</i> */
+	volatile uint32_t gpvndctl;
+	/**General Purpose Input/Output Register.  <i>Offset: 038h</i> */
+	volatile uint32_t ggpio;
+	/**User ID Register.  <i>Offset: 03Ch</i> */
+	volatile uint32_t guid;
+	/**Synopsys ID Register (Read Only).  <i>Offset: 040h</i> */
+	volatile uint32_t gsnpsid;
+	/**User HW Config1 Register (Read Only).  <i>Offset: 044h</i> */
+	volatile uint32_t ghwcfg1;
+	/**User HW Config2 Register (Read Only).  <i>Offset: 048h</i> */
+	volatile uint32_t ghwcfg2;
+#define DWC_SLAVE_ONLY_ARCH 0
+#define DWC_EXT_DMA_ARCH 1
+#define DWC_INT_DMA_ARCH 2
+
+#define DWC_MODE_HNP_SRP_CAPABLE	0
+#define DWC_MODE_SRP_ONLY_CAPABLE	1
+#define DWC_MODE_NO_HNP_SRP_CAPABLE		2
+#define DWC_MODE_SRP_CAPABLE_DEVICE		3
+#define DWC_MODE_NO_SRP_CAPABLE_DEVICE	4
+#define DWC_MODE_SRP_CAPABLE_HOST	5
+#define DWC_MODE_NO_SRP_CAPABLE_HOST	6
+
+	/**User HW Config3 Register (Read Only).  <i>Offset: 04Ch</i> */
+	volatile uint32_t ghwcfg3;
+	/**User HW Config4 Register (Read Only).  <i>Offset: 050h</i>*/
+	volatile uint32_t ghwcfg4;
+	/** Core LPM Configuration register <i>Offset: 054h</i>*/
+	volatile uint32_t glpmcfg;
+	/** Global PowerDn Register <i>Offset: 058h</i> */
+	volatile uint32_t gpwrdn;
+	/** Global DFIFO SW Config Register  <i>Offset: 05Ch</i> */
+	volatile uint32_t gdfifocfg;
+	/** ADP Control Register  <i>Offset: 060h</i> */
+	volatile uint32_t adpctl;
+	/** Reserved  <i>Offset: 064h-0FFh</i> */
+	volatile uint32_t reserved39[39];
+	/** Host Periodic Transmit FIFO Size Register. <i>Offset: 100h</i> */
+	volatile uint32_t hptxfsiz;
+	/** Device Periodic Transmit FIFO#n Register if dedicated fifos are disabled,
+		otherwise Device Transmit FIFO#n Register.
+	 * <i>Offset: 104h + (FIFO_Number-1)*04h, 1 <= FIFO Number <= 15 (1<=n<=15).</i> */
+	volatile uint32_t dtxfsiz[15];
+} dwc_otg_core_global_regs_t;
+
+/**
+ * This union represents the bit fields of the Core OTG Control
+ * and Status Register (GOTGCTL).  Set the bits using the bit
+ * fields then write the <i>d32</i> value to the register.
+ */
+typedef union gotgctl_data {
+	/** raw register data */
+	uint32_t d32;
+	/** register bits */
+	struct {
+		unsigned sesreqscs:1;
+		unsigned sesreq:1;
+		unsigned vbvalidoven:1;
+		unsigned vbvalidovval:1;
+		unsigned avalidoven:1;
+		unsigned avalidovval:1;
+		unsigned bvalidoven:1;
+		unsigned bvalidovval:1;
+		unsigned hstnegscs:1;
+		unsigned hnpreq:1;
+		unsigned hstsethnpen:1;
+		unsigned devhnpen:1;
+		unsigned reserved12_15:4;
+		unsigned conidsts:1;
+		unsigned dbnctime:1;
+		unsigned asesvld:1;
+		unsigned bsesvld:1;
+		unsigned otgver:1;
+		unsigned reserved1:1;
+		unsigned multvalidbc:5;
+		unsigned chirpen:1;
+		unsigned reserved28_31:4;
+	} b;
+} gotgctl_data_t;
+
+/**
+ * This union represents the bit fields of the Core OTG Interrupt Register
+ * (GOTGINT).  Set/clear the bits using the bit fields then write the <i>d32</i>
+ * value to the register.
+ */
+typedef union gotgint_data {
+	/** raw register data */
+	uint32_t d32;
+	/** register bits */
+	struct {
+		/** Current Mode */
+		unsigned reserved0_1:2;
+
+		/** Session End Detected */
+		unsigned sesenddet:1;
+
+		unsigned reserved3_7:5;
+
+		/** Session Request Success Status Change */
+		unsigned sesreqsucstschng:1;
+		/** Host Negotiation Success Status Change */
+		unsigned hstnegsucstschng:1;
+
+		unsigned reserved10_16:7;
+
+		/** Host Negotiation Detected */
+		unsigned hstnegdet:1;
+		/** A-Device Timeout Change */
+		unsigned adevtoutchng:1;
+		/** Debounce Done */
+		unsigned debdone:1;
+		/** Multi-Valued input changed */
+		unsigned mvic:1;
+
+		unsigned reserved31_21:11;
+
+	} b;
+} gotgint_data_t;
+
+/**
+ * This union represents the bit fields of the Core AHB Configuration
+ * Register (GAHBCFG). Set/clear the bits using the bit fields then
+ * write the <i>d32</i> value to the register.
+ */
+typedef union gahbcfg_data {
+	/** raw register data */
+	uint32_t d32;
+	/** register bits */
+	struct {
+		unsigned glblintrmsk:1;
+#define DWC_GAHBCFG_GLBINT_ENABLE		1
+
+		unsigned hburstlen:4;
+#define DWC_GAHBCFG_INT_DMA_BURST_SINGLE	0
+#define DWC_GAHBCFG_INT_DMA_BURST_INCR		1
+#define DWC_GAHBCFG_INT_DMA_BURST_INCR4		3
+#define DWC_GAHBCFG_INT_DMA_BURST_INCR8		5
+#define DWC_GAHBCFG_INT_DMA_BURST_INCR16	7
+
+		unsigned dmaenable:1;
+#define DWC_GAHBCFG_DMAENABLE			1
+		unsigned reserved:1;
+		unsigned nptxfemplvl_txfemplvl:1;
+		unsigned ptxfemplvl:1;
+#define DWC_GAHBCFG_TXFEMPTYLVL_EMPTY		1
+#define DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY	0
+		unsigned reserved9_20:12;
+		unsigned remmemsupp:1;
+		unsigned notialldmawrit:1;
+		unsigned ahbsingle:1;
+		unsigned reserved24_31:8;
+	} b;
+} gahbcfg_data_t;
+
+/**
+ * This union represents the bit fields of the Core USB Configuration
+ * Register (GUSBCFG). Set the bits using the bit fields then write
+ * the <i>d32</i> value to the register.
+ */
+typedef union gusbcfg_data {
+	/** raw register data */
+	uint32_t d32;
+	/** register bits */
+	struct {
+		unsigned toutcal:3;
+		unsigned phyif:1;
+		unsigned ulpi_utmi_sel:1;
+		unsigned fsintf:1;
+		unsigned physel:1;
+		unsigned ddrsel:1;
+		unsigned srpcap:1;
+		unsigned hnpcap:1;
+		unsigned usbtrdtim:4;
+		unsigned reserved1:1;
+		unsigned phylpwrclksel:1;
+		unsigned otgutmifssel:1;
+		unsigned ulpi_fsls:1;
+		unsigned ulpi_auto_res:1;
+		unsigned ulpi_clk_sus_m:1;
+		unsigned ulpi_ext_vbus_drv:1;
+		unsigned ulpi_int_vbus_indicator:1;
+		unsigned term_sel_dl_pulse:1;
+		unsigned indicator_complement:1;
+		unsigned indicator_pass_through:1;
+		unsigned ulpi_int_prot_dis:1;
+		unsigned ic_usb_cap:1;
+		unsigned ic_traffic_pull_remove:1;
+		unsigned tx_end_delay:1;
+		unsigned force_host_mode:1;
+		unsigned force_dev_mode:1;
+		unsigned reserved31:1;
+	} b;
+} gusbcfg_data_t;
+
+/**
+ * This union represents the bit fields of the Core Reset Register
+ * (GRSTCTL).  Set/clear the bits using the bit fields then write the
+ * <i>d32</i> value to the register.
+ */
+typedef union grstctl_data {
+	/** raw register data */
+	uint32_t d32;
+	/** register bits */
+	struct {
+		/** Core Soft Reset (CSftRst) (Device and Host)
+		 *
+		 * The application can flush the control logic in the
+		 * entire core using this bit. This bit resets the
+		 * pipelines in the AHB Clock domain as well as the
+		 * PHY Clock domain.
+		 *
+		 * The state machines are reset to an IDLE state, the
+		 * control bits in the CSRs are cleared, all the
+		 * transmit FIFOs and the receive FIFO are flushed.
+		 *
+		 * The status mask bits that control the generation of
+		 * the interrupt, are cleared, to clear the
+		 * interrupt. The interrupt status bits are not
+		 * cleared, so the application can get the status of
+		 * any events that occurred in the core after it has
+		 * set this bit.
+		 *
+		 * Any transactions on the AHB are terminated as soon
+		 * as possible following the protocol. Any
+		 * transactions on the USB are terminated immediately.
+		 *
+		 * The configuration settings in the CSRs are
+		 * unchanged, so the software doesn't have to
+		 * reprogram these registers (Device
+		 * Configuration/Host Configuration/Core System
+		 * Configuration/Core PHY Configuration).
+		 *
+		 * The application can write to this bit, any time it
+		 * wants to reset the core. This is a self clearing
+		 * bit and the core clears this bit after all the
+		 * necessary logic is reset in the core, which may
+		 * take several clocks, depending on the current state
+		 * of the core.
+		 */
+		unsigned csftrst:1;
+		/** Hclk Soft Reset
+		 *
+		 * The application uses this bit to reset the control logic in
+		 * the AHB clock domain. Only AHB clock domain pipelines are
+		 * reset.
+		 */
+		unsigned hsftrst:1;
+		/** Host Frame Counter Reset (Host Only)<br>
+		 *
+		 * The application can reset the (micro)frame number
+		 * counter inside the core, using this bit. When the
+		 * (micro)frame counter is reset, the subsequent SOF
+		 * sent out by the core, will have a (micro)frame
+		 * number of 0.
+		 */
+		unsigned hstfrm:1;
+		/** In Token Sequence Learning Queue Flush
+		 * (INTknQFlsh) (Device Only)
+		 */
+		unsigned intknqflsh:1;
+		/** RxFIFO Flush (RxFFlsh) (Device and Host)
+		 *
+		 * The application can flush the entire Receive FIFO
+		 * using this bit. The application must first
+		 * ensure that the core is not in the middle of a
+		 * transaction. The application should write into
+		 * this bit, only after making sure that neither the
+		 * DMA engine is reading from the RxFIFO nor the MAC
+		 * is writing the data in to the FIFO. The
+		 * application should wait until the bit is cleared
+		 * before performing any other operations. This bit
+		 * will takes 8 clocks (slowest of PHY or AHB clock)
+		 * to clear.
+		 */
+		unsigned rxfflsh:1;
+		/** TxFIFO Flush (TxFFlsh) (Device and Host). 
+		 *
+		 * This bit is used to selectively flush a single or
+		 * all transmit FIFOs. The application must first
+		 * ensure that the core is not in the middle of a
+		 * transaction. The application should write into
+		 * this bit, only after making sure that neither the
+		 * DMA engine is writing into the TxFIFO nor the MAC
+		 * is reading the data out of the FIFO. The
+		 * application should wait until the core clears this
+		 * bit, before performing any operations. This bit
+		 * will takes 8 clocks (slowest of PHY or AHB clock)
+		 * to clear.
+		 */
+		unsigned txfflsh:1;
+
+		/** TxFIFO Number (TxFNum) (Device and Host).
+		 *
+		 * This is the FIFO number which needs to be flushed,
+		 * using the TxFIFO Flush bit. This field should not
+		 * be changed until the TxFIFO Flush bit is cleared by
+		 * the core.
+		 *	 - 0x0 : Non Periodic TxFIFO Flush
+		 *	 - 0x1 : Periodic TxFIFO #1 Flush in device mode
+		 *	   or Periodic TxFIFO in host mode
+		 *	 - 0x2 : Periodic TxFIFO #2 Flush in device mode.
+		 *	 - ...
+		 *	 - 0xF : Periodic TxFIFO #15 Flush in device mode
+		 *	 - 0x10: Flush all the Transmit NonPeriodic and
+		 *	   Transmit Periodic FIFOs in the core
+		 */
+		unsigned txfnum:5;
+		/** Reserved */
+		unsigned reserved11_29:19;
+		/** DMA Request Signal.	 Indicated DMA request is in
+		 * probress. Used for debug purpose. */
+		unsigned dmareq:1;
+		/** AHB Master Idle.  Indicates the AHB Master State
+		 * Machine is in IDLE condition. */
+		unsigned ahbidle:1;
+	} b;
+} grstctl_t;
+
+/**
+ * This union represents the bit fields of the Core Interrupt Mask
+ * Register (GINTMSK). Set/clear the bits using the bit fields then
+ * write the <i>d32</i> value to the register.
+ */
+typedef union gintmsk_data {
+	/** raw register data */
+	uint32_t d32;
+	/** register bits */
+	struct {
+		unsigned reserved0:1;
+		unsigned modemismatch:1;
+		unsigned otgintr:1;
+		unsigned sofintr:1;
+		unsigned rxstsqlvl:1;
+		unsigned nptxfempty:1;
+		unsigned ginnakeff:1;
+		unsigned goutnakeff:1;
+		unsigned ulpickint:1;
+		unsigned i2cintr:1;
+		unsigned erlysuspend:1;
+		unsigned usbsuspend:1;
+		unsigned usbreset:1;
+		unsigned enumdone:1;
+		unsigned isooutdrop:1;
+		unsigned eopframe:1;
+		unsigned restoredone:1;
+		unsigned epmismatch:1;
+		unsigned inepintr:1;
+		unsigned outepintr:1;
+		unsigned incomplisoin:1;
+		unsigned incomplisoout:1;
+		unsigned fetsusp:1;
+		unsigned resetdet:1;
+		unsigned portintr:1;
+		unsigned hcintr:1;
+		unsigned ptxfempty:1;
+		unsigned lpmtranrcvd:1;
+		unsigned conidstschng:1;
+		unsigned disconnect:1;
+		unsigned sessreqintr:1;
+		unsigned wkupintr:1;
+	} b;
+} gintmsk_data_t;
+/**
+ * This union represents the bit fields of the Core Interrupt Register
+ * (GINTSTS).  Set/clear the bits using the bit fields then write the
+ * <i>d32</i> value to the register.
+ */
+typedef union gintsts_data {
+	/** raw register data */
+	uint32_t d32;
+#define DWC_SOF_INTR_MASK 0x0008
+	/** register bits */
+	struct {
+#define DWC_HOST_MODE 1
+		unsigned curmode:1;
+		unsigned modemismatch:1;
+		unsigned otgintr:1;
+		unsigned sofintr:1;
+		unsigned rxstsqlvl:1;
+		unsigned nptxfempty:1;
+		unsigned ginnakeff:1;
+		unsigned goutnakeff:1;
+		unsigned ulpickint:1;
+		unsigned i2cintr:1;
+		unsigned erlysuspend:1;
+		unsigned usbsuspend:1;
+		unsigned usbreset:1;
+		unsigned enumdone:1;
+		unsigned isooutdrop:1;
+		unsigned eopframe:1;
+		unsigned restoredone:1;
+		unsigned epmismatch:1;
+		unsigned inepint:1;
+		unsigned outepintr:1;
+		unsigned incomplisoin:1;
+		unsigned incomplisoout:1;
+		unsigned fetsusp:1;
+		unsigned resetdet:1;
+		unsigned portintr:1;
+		unsigned hcintr:1;
+		unsigned ptxfempty:1;
+		unsigned lpmtranrcvd:1;
+		unsigned conidstschng:1;
+		unsigned disconnect:1;
+		unsigned sessreqintr:1;
+		unsigned wkupintr:1;
+	} b;
+} gintsts_data_t;
+
+/**
+ * This union represents the bit fields in the Device Receive Status Read and
+ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i>
+ * element then read out the bits using the <i>b</i>it elements.
+ */
+typedef union device_grxsts_data {
+	/** raw register data */
+	uint32_t d32;
+	/** register bits */
+	struct {
+		unsigned epnum:4;
+		unsigned bcnt:11;
+		unsigned dpid:2;
+
+#define DWC_STS_DATA_UPDT		0x2	// OUT Data Packet
+#define DWC_STS_XFER_COMP		0x3	// OUT Data Transfer Complete
+
+#define DWC_DSTS_GOUT_NAK		0x1	// Global OUT NAK
+#define DWC_DSTS_SETUP_COMP		0x4	// Setup Phase Complete
+#define DWC_DSTS_SETUP_UPDT 0x6	// SETUP Packet
+		unsigned pktsts:4;
+		unsigned fn:4;
+		unsigned reserved25_31:7;
+	} b;
+} device_grxsts_data_t;
+
+/**
+ * This union represents the bit fields in the Host Receive Status Read and
+ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i>
+ * element then read out the bits using the <i>b</i>it elements.
+ */
+typedef union host_grxsts_data {
+	/** raw register data */
+	uint32_t d32;
+	/** register bits */
+	struct {
+		unsigned chnum:4;
+		unsigned bcnt:11;
+		unsigned dpid:2;
+
+		unsigned pktsts:4;
+#define DWC_GRXSTS_PKTSTS_IN			  0x2
+#define DWC_GRXSTS_PKTSTS_IN_XFER_COMP	  0x3
+#define DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR 0x5
+#define DWC_GRXSTS_PKTSTS_CH_HALTED		  0x7
+
+		unsigned reserved21_31:11;
+	} b;
+} host_grxsts_data_t;
+
+/**
+ * This union represents the bit fields in the FIFO Size Registers (HPTXFSIZ,
+ * GNPTXFSIZ, DPTXFSIZn, DIEPTXFn). Read the register into the <i>d32</i> element 
+ * then read out the bits using the <i>b</i>it elements.
+ */
+typedef union fifosize_data {
+	/** raw register data */
+	uint32_t d32;
+	/** register bits */
+	struct {
+		unsigned startaddr:16;
+		unsigned depth:16;
+	} b;
+} fifosize_data_t;
+
+/**
+ * This union represents the bit fields in the Non-Periodic Transmit
+ * FIFO/Queue Status Register (GNPTXSTS). Read the register into the
+ * <i>d32</i> element then read out the bits using the <i>b</i>it
+ * elements.
+ */
+typedef union gnptxsts_data {
+	/** raw register data */
+	uint32_t d32;
+	/** register bits */
+	struct {
+		unsigned nptxfspcavail:16;
+		unsigned nptxqspcavail:8;
+		/** Top of the Non-Periodic Transmit Request Queue
+		 *	- bit 24 - Terminate (Last entry for the selected
+		 *	  channel/EP)
+		 *	- bits 26:25 - Token Type
+		 *	  - 2'b00 - IN/OUT
+		 *	  - 2'b01 - Zero Length OUT
+		 *	  - 2'b10 - PING/Complete Split
+		 *	  - 2'b11 - Channel Halt
+		 *	- bits 30:27 - Channel/EP Number
+		 */
+		unsigned nptxqtop_terminate:1;
+		unsigned nptxqtop_token:2;
+		unsigned nptxqtop_chnep:4;
+		unsigned reserved:1;
+	} b;
+} gnptxsts_data_t;
+
+/**
+ * This union represents the bit fields in the Transmit
+ * FIFO Status Register (DTXFSTS). Read the register into the
+ * <i>d32</i> element then read out the bits using the <i>b</i>it
+ * elements.
+ */
+typedef union dtxfsts_data {
+	/** raw register data */
+	uint32_t d32;
+	/** register bits */
+	struct {
+		unsigned txfspcavail:16;
+		unsigned reserved:16;
+	} b;
+} dtxfsts_data_t;
+
+/**
+ * This union represents the bit fields in the I2C Control Register
+ * (I2CCTL). Read the register into the <i>d32</i> element then read out the
+ * bits using the <i>b</i>it elements.
+ */
+typedef union gi2cctl_data {
+	/** raw register data */
+	uint32_t d32;
+	/** register bits */
+	struct {
+		unsigned rwdata:8;
+		unsigned regaddr:8;
+		unsigned addr:7;
+		unsigned i2cen:1;
+		unsigned ack:1;
+		unsigned i2csuspctl:1;
+		unsigned i2cdevaddr:2;
+		unsigned i2cdatse0:1;
+		unsigned reserved:1;
+		unsigned rw:1;
+		unsigned bsydne:1;
+	} b;
+} gi2cctl_data_t;
+
+/**
+ * This union represents the bit fields in the PHY Vendor Control Register
+ * (GPVNDCTL). Read the register into the <i>d32</i> element then read out the
+ * bits using the <i>b</i>it elements.
+ */
+typedef union gpvndctl_data {
+	/** raw register data */
+	uint32_t d32;
+	/** register bits */
+	struct {
+		unsigned regdata:8;
+		unsigned vctrl:8;
+		unsigned regaddr16_21:6;
+		unsigned regwr:1;
+		unsigned reserved23_24:2;
+		unsigned newregreq:1;
+		unsigned vstsbsy:1;
+		unsigned vstsdone:1;
+		unsigned reserved28_30:3;
+		unsigned disulpidrvr:1;
+	} b;
+} gpvndctl_data_t;
+
+/**
+ * This union represents the bit fields in the General Purpose 
+ * Input/Output Register (GGPIO).
+ * Read the register into the <i>d32</i> element then read out the
+ * bits using the <i>b</i>it elements.
+ */
+typedef union ggpio_data {
+	/** raw register data */
+	uint32_t d32;
+	/** register bits */
+	struct {
+		unsigned gpi:16;
+		unsigned gpo:16;
+	} b;
+} ggpio_data_t;
+
+/**
+ * This union represents the bit fields in the User ID Register
+ * (GUID). Read the register into the <i>d32</i> element then read out the
+ * bits using the <i>b</i>it elements.
+ */
+typedef union guid_data {
+	/** raw register data */
+	uint32_t d32;
+	/** register bits */
+	struct {
+		unsigned rwdata:32;
+	} b;
+} guid_data_t;
+
+/**
+ * This union represents the bit fields in the Synopsys ID Register
+ * (GSNPSID). Read the register into the <i>d32</i> element then read out the
+ * bits using the <i>b</i>it elements.
+ */
+typedef union gsnpsid_data {
+	/** raw register data */
+	uint32_t d32;
+	/** register bits */
+	struct {
+		unsigned rwdata:32;
+	} b;
+} gsnpsid_data_t;
+
+/**
+ * This union represents the bit fields in the User HW Config1
+ * Register.  Read the register into the <i>d32</i> element then read
+ * out the bits using the <i>b</i>it elements.
+ */
+typedef union hwcfg1_data {
+	/** raw register data */
+	uint32_t d32;
+	/** register bits */
+	struct {
+		unsigned ep_dir0:2;
+		unsigned ep_dir1:2;
+		unsigned ep_dir2:2;
+		unsigned ep_dir3:2;
+		unsigned ep_dir4:2;
+		unsigned ep_dir5:2;
+		unsigned ep_dir6:2;
+		unsigned ep_dir7:2;
+		unsigned ep_dir8:2;
+		unsigned ep_dir9:2;
+		unsigned ep_dir10:2;
+		unsigned ep_dir11:2;
+		unsigned ep_dir12:2;
+		unsigned ep_dir13:2;
+		unsigned ep_dir14:2;
+		unsigned ep_dir15:2;
+	} b;
+} hwcfg1_data_t;
+
+/**
+ * This union represents the bit fields in the User HW Config2
+ * Register.  Read the register into the <i>d32</i> element then read
+ * out the bits using the <i>b</i>it elements.
+ */
+typedef union hwcfg2_data {
+	/** raw register data */
+	uint32_t d32;
+	/** register bits */
+	struct {
+		/* GHWCFG2 */
+		unsigned op_mode:3;
+#define DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG 0
+#define DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG 1
+#define DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG 2
+#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3
+#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4
+#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST 5
+#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6
+
+		unsigned architecture:2;
+		unsigned point2point:1;
+		unsigned hs_phy_type:2;
+#define DWC_HWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0
+#define DWC_HWCFG2_HS_PHY_TYPE_UTMI 1
+#define DWC_HWCFG2_HS_PHY_TYPE_ULPI 2
+#define DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI 3
+
+		unsigned fs_phy_type:2;
+		unsigned num_dev_ep:4;
+		unsigned num_host_chan:4;
+		unsigned perio_ep_supported:1;
+		unsigned dynamic_fifo:1;
+		unsigned multi_proc_int:1;
+		unsigned reserved21:1;
+		unsigned nonperio_tx_q_depth:2;
+		unsigned host_perio_tx_q_depth:2;
+		unsigned dev_token_q_depth:5;
+		unsigned otg_enable_ic_usb:1;
+	} b;
+} hwcfg2_data_t;
+
+/**
+ * This union represents the bit fields in the User HW Config3
+ * Register.  Read the register into the <i>d32</i> element then read
+ * out the bits using the <i>b</i>it elements.
+ */
+typedef union hwcfg3_data {
+	/** raw register data */
+	uint32_t d32;
+	/** register bits */
+	struct {
+		/* GHWCFG3 */
+		unsigned xfer_size_cntr_width:4;
+		unsigned packet_size_cntr_width:3;
+		unsigned otg_func:1;
+		unsigned i2c:1;
+		unsigned vendor_ctrl_if:1;
+		unsigned optional_features:1;
+		unsigned synch_reset_type:1;
+		unsigned adp_supp:1;
+		unsigned otg_enable_hsic:1;
+		unsigned bc_support:1;
+		unsigned otg_lpm_en:1;
+		unsigned dfifo_depth:16;
+	} b;
+} hwcfg3_data_t;
+
+/**
+ * This union represents the bit fields in the User HW Config4
+ * Register.  Read the register into the <i>d32</i> element then read
+ * out the bits using the <i>b</i>it elements.
+ */
+typedef union hwcfg4_data {
+	/** raw register data */
+	uint32_t d32;
+	/** register bits */
+	struct {
+		unsigned num_dev_perio_in_ep:4;
+		unsigned power_optimiz:1;
+		unsigned min_ahb_freq:1;
+		unsigned hiber:1;
+		unsigned xhiber:1;
+		unsigned reserved:6;
+		unsigned utmi_phy_data_width:2;
+		unsigned num_dev_mode_ctrl_ep:4;
+		unsigned iddig_filt_en:1;
+		unsigned vbus_valid_filt_en:1;
+		unsigned a_valid_filt_en:1;
+		unsigned b_valid_filt_en:1;
+		unsigned session_end_filt_en:1;
+		unsigned ded_fifo_en:1;
+		unsigned num_in_eps:4;
+		unsigned desc_dma:1;
+		unsigned desc_dma_dyn:1;
+	} b;
+} hwcfg4_data_t;
+
+/**
+ * This union represents the bit fields of the Core LPM Configuration
+ * Register (GLPMCFG). Set the bits using bit fields then write
+ * the <i>d32</i> value to the register.
+ */
+typedef union glpmctl_data {
+	/** raw register data */
+	uint32_t d32;
+	/** register bits */
+	struct {
+		/** LPM-Capable (LPMCap) (Device and Host)
+		 * The application uses this bit to control
+		 * the DWC_otg core LPM capabilities.
+		 */
+		unsigned lpm_cap_en:1;
+		/** LPM response programmed by application (AppL1Res) (Device)
+		 * Handshake response to LPM token pre-programmed
+		 * by device application software.
+		 */
+		unsigned appl_resp:1;
+		/** Host Initiated Resume Duration (HIRD) (Device and Host)
+		 * In Host mode this field indicates the value of HIRD
+		 * to be sent in an LPM transaction.
+		 * In Device mode this field is updated with the
+		 * Received LPM Token HIRD bmAttribute
+		 * when an ACK/NYET/STALL response is sent
+		 * to an LPM transaction.
+		 */
+		unsigned hird:4;
+		/** RemoteWakeEnable (bRemoteWake) (Device and Host)
+		 * In Host mode this bit indicates the value of remote
+		 * wake up to be sent in wIndex field of LPM transaction.
+		 * In Device mode this field is updated with the
+		 * Received LPM Token bRemoteWake bmAttribute
+		 * when an ACK/NYET/STALL response is sent
+		 * to an LPM transaction.
+		 */
+		unsigned rem_wkup_en:1;
+		/** Enable utmi_sleep_n (EnblSlpM) (Device and Host)
+		 * The application uses this bit to control
+		 * the utmi_sleep_n assertion to the PHY when in L1 state.
+		 */
+		unsigned en_utmi_sleep:1;
+		/** HIRD Threshold (HIRD_Thres) (Device and Host)
+		 */
+		unsigned hird_thres:5;
+		/** LPM Response (CoreL1Res) (Device and Host)
+		 * In Host mode this bit contains handsake response to
+		 * LPM transaction.
+		 * In Device mode the response of the core to
+		 * LPM transaction received is reflected in these two bits.
+		 	- 0x0 : ERROR (No handshake response)
+			- 0x1 : STALL
+			- 0x2 : NYET
+			- 0x3 : ACK			
+		 */
+		unsigned lpm_resp:2;
+		/** Port Sleep Status (SlpSts) (Device and Host)
+		 * This bit is set as long as a Sleep condition
+		 * is present on the USB bus.
+		 */
+		unsigned prt_sleep_sts:1;
+		/** Sleep State Resume OK (L1ResumeOK) (Device and Host)
+		 * Indicates that the application or host
+		 * can start resume from Sleep state.
+		 */
+		unsigned sleep_state_resumeok:1;
+		/** LPM channel Index (LPM_Chnl_Indx) (Host)
+		 * The channel number on which the LPM transaction
+		 * has to be applied while sending
+		 * an LPM transaction to the local device.
+		 */
+		unsigned lpm_chan_index:4;
+		/** LPM Retry Count (LPM_Retry_Cnt) (Host)
+		 * Number host retries that would be performed
+		 * if the device response was not valid response.
+		 */
+		unsigned retry_count:3;
+		/** Send LPM Transaction (SndLPM) (Host)
+		 * When set by application software,
+		 * an LPM transaction containing two tokens
+		 * is sent.
+		 */
+		unsigned send_lpm:1;
+		/** LPM Retry status (LPM_RetryCnt_Sts) (Host)
+		 * Number of LPM Host Retries still remaining
+		 * to be transmitted for the current LPM sequence
+		 */
+		unsigned retry_count_sts:3;
+		unsigned reserved28_29:2;
+		/** In host mode once this bit is set, the host
+		 * configures to drive the HSIC Idle state on the bus.
+		 * It then waits for the  device to initiate the Connect sequence.
+		 * In device mode once this bit is set, the device waits for
+		 * the HSIC Idle line state on the bus. Upon receving the Idle
+		 * line state, it initiates the HSIC Connect sequence.
+		 */
+		unsigned hsic_connect:1;
+		/** This bit overrides and functionally inverts
+		 * the if_select_hsic input port signal.
+		 */
+		unsigned inv_sel_hsic:1;
+	} b;
+} glpmcfg_data_t;
+
+/**
+ * This union represents the bit fields of the Core ADP Timer, Control and
+ * Status Register (ADPTIMCTLSTS). Set the bits using bit fields then write
+ * the <i>d32</i> value to the register.
+ */
+typedef union adpctl_data {
+	/** raw register data */
+	uint32_t d32;
+	/** register bits */
+	struct {
+		/** Probe Discharge (PRB_DSCHG)
+		 *  These bits set the times for TADP_DSCHG. 
+		 *  These bits are defined as follows:
+		 *  2'b00 - 4 msec
+		 *  2'b01 - 8 msec
+		 *  2'b10 - 16 msec
+		 *  2'b11 - 32 msec
+		 */
+		unsigned prb_dschg:2;
+		/** Probe Delta (PRB_DELTA)
+		 *  These bits set the resolution for RTIM   value.
+		 *  The bits are defined in units of 32 kHz clock cycles as follows:
+		 *  2'b00  -  1 cycles
+		 *  2'b01  -  2 cycles
+		 *  2'b10 -  3 cycles
+		 *  2'b11 - 4 cycles
+		 *  For example if this value is chosen to 2'b01, it means that RTIM
+		 *  increments for every 3(three) 32Khz clock cycles.
+		 */
+		unsigned prb_delta:2;
+		/** Probe Period (PRB_PER)
+		 *  These bits sets the TADP_PRD as shown in Figure 4 as follows:
+		 *  2'b00  -  0.625 to 0.925 sec (typical 0.775 sec)
+		 *  2'b01  -  1.25 to 1.85 sec (typical 1.55 sec)
+		 *  2'b10  -  1.9 to 2.6 sec (typical 2.275 sec)
+		 *  2'b11  -  Reserved
+		 */
+		unsigned prb_per:2;
+		/** These bits capture the latest time it took for VBUS to ramp from 
+		 *  VADP_SINK to VADP_PRB. 
+		 *  0x000  -  1 cycles
+		 *  0x001  -  2 cycles
+		 *  0x002  -  3 cycles
+		 *  etc
+		 *  0x7FF  -  2048 cycles
+		 *  A time of 1024 cycles at 32 kHz corresponds to a time of 32 msec.
+		*/
+		unsigned rtim:11;
+		/** Enable Probe (EnaPrb)
+		 *  When programmed to 1'b1, the core performs a probe operation.
+		 *  This bit is valid only if OTG_Ver = 1'b1.
+		 */
+		unsigned enaprb:1;
+		/** Enable Sense (EnaSns)
+		 *  When programmed to 1'b1, the core performs a Sense operation.
+		 *  This bit is valid only if OTG_Ver = 1'b1.
+		 */
+		unsigned enasns:1;
+		/** ADP Reset (ADPRes)
+		 *  When set, ADP controller is reset.
+		 *  This bit is valid only if OTG_Ver = 1'b1.
+ 		 */
+		unsigned adpres:1;
+		/** ADP Enable (ADPEn)
+		 *  When set, the core performs either ADP probing or sensing
+		 *  based on EnaPrb or EnaSns.
+		 *  This bit is valid only if OTG_Ver = 1'b1.
+		 */
+		unsigned adpen:1;
+		/** ADP Probe Interrupt (ADP_PRB_INT)
+		 *  When this bit is set, it means that the VBUS
+		 *  voltage is greater than VADP_PRB or VADP_PRB is reached.
+		 *  This bit is valid only if OTG_Ver = 1'b1.
+		 */
+		unsigned adp_prb_int:1;
+		/**
+		 *  ADP Sense Interrupt (ADP_SNS_INT)
+		 *  When this bit is set, it means that the VBUS voltage is greater than 
+		 *  VADP_SNS value or VADP_SNS is reached.
+		 *  This bit is valid only if OTG_Ver = 1'b1.
+		 */
+		unsigned adp_sns_int:1;
+		/** ADP Tomeout Interrupt (ADP_TMOUT_INT)
+		 *  This bit is relevant only for an ADP probe.
+		 *  When this bit is set, it means that the ramp time has
+		 *  completed ie ADPCTL.RTIM has reached its terminal value
+		 *  of 0x7FF.  This is a debug feature that allows software
+		 *  to read the ramp time after each cycle.
+		 *  This bit is valid only if OTG_Ver = 1'b1.
+		 */
+		unsigned adp_tmout_int:1;
+		/** ADP Probe Interrupt Mask (ADP_PRB_INT_MSK)
+		 *  When this bit is set, it unmasks the interrupt due to ADP_PRB_INT.
+		 *  This bit is valid only if OTG_Ver = 1'b1.
+		 */
+		unsigned adp_prb_int_msk:1;
+		/** ADP Sense Interrupt Mask (ADP_SNS_INT_MSK)
+		 *  When this bit is set, it unmasks the interrupt due to ADP_SNS_INT.
+		 *  This bit is valid only if OTG_Ver = 1'b1.
+		 */
+		unsigned adp_sns_int_msk:1;
+		/** ADP Timoeout Interrupt Mask (ADP_TMOUT_MSK)
+		 *  When this bit is set, it unmasks the interrupt due to ADP_TMOUT_INT.
+		 *  This bit is valid only if OTG_Ver = 1'b1.
+		 */
+		unsigned adp_tmout_int_msk:1;
+		/** Access Request
+		 * 2'b00 - Read/Write Valid (updated by the core) 
+		 * 2'b01 - Read
+		 * 2'b00 - Write
+		 * 2'b00 - Reserved
+		 */
+		unsigned ar:2;
+		 /** Reserved */
+		unsigned reserved29_31:3;
+	} b;
+} adpctl_data_t;
+
+////////////////////////////////////////////
+// Device Registers
+/**
+ * Device Global Registers. <i>Offsets 800h-BFFh</i>
+ *
+ * The following structures define the size and relative field offsets
+ * for the Device Mode Registers.
+ *
+ * <i>These registers are visible only in Device mode and must not be
+ * accessed in Host mode, as the results are unknown.</i>
+ */
+typedef struct dwc_otg_dev_global_regs {
+	/** Device Configuration Register. <i>Offset 800h</i> */
+	volatile uint32_t dcfg;
+	/** Device Control Register. <i>Offset: 804h</i> */
+	volatile uint32_t dctl;
+	/** Device Status Register (Read Only). <i>Offset: 808h</i> */
+	volatile uint32_t dsts;
+	/** Reserved. <i>Offset: 80Ch</i> */
+	uint32_t unused;
+	/** Device IN Endpoint Common Interrupt Mask
+	 * Register. <i>Offset: 810h</i> */
+	volatile uint32_t diepmsk;
+	/** Device OUT Endpoint Common Interrupt Mask
+	 * Register. <i>Offset: 814h</i> */
+	volatile uint32_t doepmsk;
+	/** Device All Endpoints Interrupt Register.  <i>Offset: 818h</i> */
+	volatile uint32_t daint;
+	/** Device All Endpoints Interrupt Mask Register.  <i>Offset:
+	 * 81Ch</i> */
+	volatile uint32_t daintmsk;
+	/** Device IN Token Queue Read Register-1 (Read Only).
+	 * <i>Offset: 820h</i> */
+	volatile uint32_t dtknqr1;
+	/** Device IN Token Queue Read Register-2 (Read Only).
+	 * <i>Offset: 824h</i> */
+	volatile uint32_t dtknqr2;
+	/** Device VBUS	 discharge Register.  <i>Offset: 828h</i> */
+	volatile uint32_t dvbusdis;
+	/** Device VBUS Pulse Register.	 <i>Offset: 82Ch</i> */
+	volatile uint32_t dvbuspulse;
+	/** Device IN Token Queue Read Register-3 (Read Only). /
+	 *	Device Thresholding control register (Read/Write)
+	 * <i>Offset: 830h</i> */
+	volatile uint32_t dtknqr3_dthrctl;
+	/** Device IN Token Queue Read Register-4 (Read Only). /
+	 *	Device IN EPs empty Inr. Mask Register (Read/Write)
+	 * <i>Offset: 834h</i> */
+	volatile uint32_t dtknqr4_fifoemptymsk;
+	/** Device Each Endpoint Interrupt Register (Read Only). /
+	 * <i>Offset: 838h</i> */
+	volatile uint32_t deachint;
+	/** Device Each Endpoint Interrupt mask Register (Read/Write). /
+	 * <i>Offset: 83Ch</i> */
+	volatile uint32_t deachintmsk;
+	/** Device Each In Endpoint Interrupt mask Register (Read/Write). /
+	 * <i>Offset: 840h</i> */
+	volatile uint32_t diepeachintmsk[MAX_EPS_CHANNELS];
+	/** Device Each Out Endpoint Interrupt mask Register (Read/Write). /
+	 * <i>Offset: 880h</i> */
+	volatile uint32_t doepeachintmsk[MAX_EPS_CHANNELS];
+} dwc_otg_device_global_regs_t;
+
+/**
+ * This union represents the bit fields in the Device Configuration
+ * Register.  Read the register into the <i>d32</i> member then
+ * set/clear the bits using the <i>b</i>it elements.  Write the
+ * <i>d32</i> member to the dcfg register.
+ */
+typedef union dcfg_data {
+	/** raw register data */
+	uint32_t d32;
+	/** register bits */
+	struct {
+		/** Device Speed */
+		unsigned devspd:2;
+		/** Non Zero Length Status OUT Handshake */
+		unsigned nzstsouthshk:1;
+#define DWC_DCFG_SEND_STALL 1
+
+		unsigned ena32khzs:1;
+		/** Device Addresses */
+		unsigned devaddr:7;
+		/** Periodic Frame Interval */
+		unsigned perfrint:2;
+#define DWC_DCFG_FRAME_INTERVAL_80 0
+#define DWC_DCFG_FRAME_INTERVAL_85 1
+#define DWC_DCFG_FRAME_INTERVAL_90 2
+#define DWC_DCFG_FRAME_INTERVAL_95 3
+
+		/** Enable Device OUT NAK for bulk in DDMA mode */
+		unsigned endevoutnak:1;
+
+		unsigned reserved14_17:4;
+		/** In Endpoint Mis-match count */
+		unsigned epmscnt:5;
+		/** Enable Descriptor DMA in Device mode */
+		unsigned descdma:1;
+		unsigned perschintvl:2;
+		unsigned resvalid:6;
+	} b;
+} dcfg_data_t;
+
+/**
+ * This union represents the bit fields in the Device Control
+ * Register.  Read the register into the <i>d32</i> member then
+ * set/clear the bits using the <i>b</i>it elements.
+ */
+typedef union dctl_data {
+	/** raw register data */
+	uint32_t d32;
+	/** register bits */
+	struct {
+		/** Remote Wakeup */
+		unsigned rmtwkupsig:1;
+		/** Soft Disconnect */
+		unsigned sftdiscon:1;
+		/** Global Non-Periodic IN NAK Status */
+		unsigned gnpinnaksts:1;
+		/** Global OUT NAK Status */
+		unsigned goutnaksts:1;
+		/** Test Control */
+		unsigned tstctl:3;
+		/** Set Global Non-Periodic IN NAK */
+		unsigned sgnpinnak:1;
+		/** Clear Global Non-Periodic IN NAK */
+		unsigned cgnpinnak:1;
+		/** Set Global OUT NAK */
+		unsigned sgoutnak:1;
+		/** Clear Global OUT NAK */
+		unsigned cgoutnak:1;
+		/** Power-On Programming Done */
+		unsigned pwronprgdone:1;
+		/** Reserved */
+		unsigned reserved:1;
+		/** Global Multi Count */
+		unsigned gmc:2;
+		/** Ignore Frame Number for ISOC EPs */
+		unsigned ifrmnum:1;
+		/** NAK on Babble */
+		unsigned nakonbble:1;
+		/** Enable Continue on BNA */
+		unsigned encontonbna:1;
+
+		unsigned reserved18_31:14;
+	} b;
+} dctl_data_t;
+
+/**
+ * This union represents the bit fields in the Device Status
+ * Register.  Read the register into the <i>d32</i> member then
+ * set/clear the bits using the <i>b</i>it elements.
+ */
+typedef union dsts_data {
+	/** raw register data */
+	uint32_t d32;
+	/** register bits */
+	struct {
+		/** Suspend Status */
+		unsigned suspsts:1;
+		/** Enumerated Speed */
+		unsigned enumspd:2;
+#define DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ 0
+#define DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ 1
+#define DWC_DSTS_ENUMSPD_LS_PHY_6MHZ		   2
+#define DWC_DSTS_ENUMSPD_FS_PHY_48MHZ		   3
+		/** Erratic Error */
+		unsigned errticerr:1;
+		unsigned reserved4_7:4;
+		/** Frame or Microframe Number of the received SOF */
+		unsigned soffn:14;
+		unsigned reserved22_31:10;
+	} b;
+} dsts_data_t;
+
+/**
+ * This union represents the bit fields in the Device IN EP Interrupt
+ * Register and the Device IN EP Common Mask Register.
+ *
+ * - Read the register into the <i>d32</i> member then set/clear the
+ *	 bits using the <i>b</i>it elements.
+ */
+typedef union diepint_data {
+	/** raw register data */
+	uint32_t d32;
+	/** register bits */
+	struct {
+		/** Transfer complete mask */
+		unsigned xfercompl:1;
+		/** Endpoint disable mask */
+		unsigned epdisabled:1;
+		/** AHB Error mask */
+		unsigned ahberr:1;
+		/** TimeOUT Handshake mask (non-ISOC EPs) */
+		unsigned timeout:1;
+		/** IN Token received with TxF Empty mask */
+		unsigned intktxfemp:1;
+		/** IN Token Received with EP mismatch mask */
+		unsigned intknepmis:1;
+		/** IN Endpoint NAK Effective mask */
+		unsigned inepnakeff:1;
+		/** Reserved */
+		unsigned emptyintr:1;
+
+		unsigned txfifoundrn:1;
+
+		/** BNA Interrupt mask */
+		unsigned bna:1;
+
+		unsigned reserved10_12:3;
+		/** BNA Interrupt mask */
+		unsigned nak:1;
+
+		unsigned reserved14_31:18;
+	} b;
+} diepint_data_t;
+
+/**
+ * This union represents the bit fields in the Device IN EP
+ * Common/Dedicated Interrupt Mask Register.
+ */
+typedef union diepint_data diepmsk_data_t;
+
+/**
+ * This union represents the bit fields in the Device OUT EP Interrupt
+ * Registerand Device OUT EP Common Interrupt Mask Register.
+ *
+ * - Read the register into the <i>d32</i> member then set/clear the
+ *	 bits using the <i>b</i>it elements.
+ */
+typedef union doepint_data {
+	/** raw register data */
+	uint32_t d32;
+	/** register bits */
+	struct {
+		/** Transfer complete */
+		unsigned xfercompl:1;
+		/** Endpoint disable  */
+		unsigned epdisabled:1;
+		/** AHB Error */
+		unsigned ahberr:1;
+		/** Setup Phase Done (contorl EPs) */
+		unsigned setup:1;
+		/** OUT Token Received when Endpoint Disabled */
+		unsigned outtknepdis:1;
+
+		unsigned stsphsercvd:1;
+		/** Back-to-Back SETUP Packets Received */
+		unsigned back2backsetup:1;
+
+		unsigned reserved7:1;
+		/** OUT packet Error */
+		unsigned outpkterr:1;
+		/** BNA Interrupt */
+		unsigned bna:1;
+
+		unsigned reserved10:1;
+		/** Packet Drop Status */
+		unsigned pktdrpsts:1;
+		/** Babble Interrupt */
+		unsigned babble:1;
+		/** NAK Interrupt */
+		unsigned nak:1;
+		/** NYET Interrupt */
+		unsigned nyet:1;
+		/** Bit indicating setup packet received */
+		unsigned sr:1;
+
+		unsigned reserved16_31:16;
+	} b;
+} doepint_data_t;
+
+/**
+ * This union represents the bit fields in the Device OUT EP
+ * Common/Dedicated Interrupt Mask Register.
+ */
+typedef union doepint_data doepmsk_data_t;
+
+/**
+ * This union represents the bit fields in the Device All EP Interrupt
+ * and Mask Registers.
+ * - Read the register into the <i>d32</i> member then set/clear the
+ *	 bits using the <i>b</i>it elements.
+ */
+typedef union daint_data {
+	/** raw register data */
+	uint32_t d32;
+	/** register bits */
+	struct {
+		/** IN Endpoint bits */
+		unsigned in:16;
+		/** OUT Endpoint bits */
+		unsigned out:16;
+	} ep;
+	struct {
+		/** IN Endpoint bits */
+		unsigned inep0:1;
+		unsigned inep1:1;
+		unsigned inep2:1;
+		unsigned inep3:1;
+		unsigned inep4:1;
+		unsigned inep5:1;
+		unsigned inep6:1;
+		unsigned inep7:1;
+		unsigned inep8:1;
+		unsigned inep9:1;
+		unsigned inep10:1;
+		unsigned inep11:1;
+		unsigned inep12:1;
+		unsigned inep13:1;
+		unsigned inep14:1;
+		unsigned inep15:1;
+		/** OUT Endpoint bits */
+		unsigned outep0:1;
+		unsigned outep1:1;
+		unsigned outep2:1;
+		unsigned outep3:1;
+		unsigned outep4:1;
+		unsigned outep5:1;
+		unsigned outep6:1;
+		unsigned outep7:1;
+		unsigned outep8:1;
+		unsigned outep9:1;
+		unsigned outep10:1;
+		unsigned outep11:1;
+		unsigned outep12:1;
+		unsigned outep13:1;
+		unsigned outep14:1;
+		unsigned outep15:1;
+	} b;
+} daint_data_t;
+
+/**
+ * This union represents the bit fields in the Device IN Token Queue
+ * Read Registers.
+ * - Read the register into the <i>d32</i> member.
+ * - READ-ONLY Register
+ */
+typedef union dtknq1_data {
+	/** raw register data */
+	uint32_t d32;
+	/** register bits */
+	struct {
+		/** In Token Queue Write Pointer */
+		unsigned intknwptr:5;
+		/** Reserved */
+		unsigned reserved05_06:2;
+		/** write pointer has wrapped. */
+		unsigned wrap_bit:1;
+		/** EP Numbers of IN Tokens 0 ... 4 */
+		unsigned epnums0_5:24;
+	} b;
+} dtknq1_data_t;
+
+/**
+ * This union represents Threshold control Register
+ * - Read and write the register into the <i>d32</i> member.
+ * - READ-WRITABLE Register
+ */
+typedef union dthrctl_data {
+	/** raw register data */
+	uint32_t d32;
+	/** register bits */
+	struct {
+		/** non ISO Tx Thr. Enable */
+		unsigned non_iso_thr_en:1;
+		/** ISO Tx Thr. Enable */
+		unsigned iso_thr_en:1;
+		/** Tx Thr. Length */
+		unsigned tx_thr_len:9;
+		/** AHB Threshold ratio */
+		unsigned ahb_thr_ratio:2;
+		/** Reserved */
+		unsigned reserved13_15:3;
+		/** Rx Thr. Enable */
+		unsigned rx_thr_en:1;
+		/** Rx Thr. Length */
+		unsigned rx_thr_len:9;
+		unsigned reserved26:1;
+		/** Arbiter Parking Enable*/
+		unsigned arbprken:1;
+		/** Reserved */
+		unsigned reserved28_31:4;
+	} b;
+} dthrctl_data_t;
+
+/**
+ * Device Logical IN Endpoint-Specific Registers. <i>Offsets
+ * 900h-AFCh</i>
+ *
+ * There will be one set of endpoint registers per logical endpoint
+ * implemented.
+ *
+ * <i>These registers are visible only in Device mode and must not be
+ * accessed in Host mode, as the results are unknown.</i>
+ */
+typedef struct dwc_otg_dev_in_ep_regs {
+	/** Device IN Endpoint Control Register. <i>Offset:900h +
+	 * (ep_num * 20h) + 00h</i> */
+	volatile uint32_t diepctl;
+	/** Reserved. <i>Offset:900h + (ep_num * 20h) + 04h</i> */
+	uint32_t reserved04;
+	/** Device IN Endpoint Interrupt Register. <i>Offset:900h +
+	 * (ep_num * 20h) + 08h</i> */
+	volatile uint32_t diepint;
+	/** Reserved. <i>Offset:900h + (ep_num * 20h) + 0Ch</i> */
+	uint32_t reserved0C;
+	/** Device IN Endpoint Transfer Size
+	 * Register. <i>Offset:900h + (ep_num * 20h) + 10h</i> */
+	volatile uint32_t dieptsiz;
+	/** Device IN Endpoint DMA Address Register. <i>Offset:900h +
+	 * (ep_num * 20h) + 14h</i> */
+	volatile uint32_t diepdma;
+	/** Device IN Endpoint Transmit FIFO Status Register. <i>Offset:900h +
+	 * (ep_num * 20h) + 18h</i> */
+	volatile uint32_t dtxfsts;
+	/** Device IN Endpoint DMA Buffer Register. <i>Offset:900h +
+	 * (ep_num * 20h) + 1Ch</i> */
+	volatile uint32_t diepdmab;
+} dwc_otg_dev_in_ep_regs_t;
+
+/**
+ * Device Logical OUT Endpoint-Specific Registers. <i>Offsets:
+ * B00h-CFCh</i>
+ *
+ * There will be one set of endpoint registers per logical endpoint
+ * implemented.
+ *
+ * <i>These registers are visible only in Device mode and must not be
+ * accessed in Host mode, as the results are unknown.</i>
+ */
+typedef struct dwc_otg_dev_out_ep_regs {
+	/** Device OUT Endpoint Control Register. <i>Offset:B00h +
+	 * (ep_num * 20h) + 00h</i> */
+	volatile uint32_t doepctl;
+	/** Reserved. <i>Offset:B00h + (ep_num * 20h) + 04h</i> */
+	uint32_t reserved04;
+	/** Device OUT Endpoint Interrupt Register. <i>Offset:B00h +
+	 * (ep_num * 20h) + 08h</i> */
+	volatile uint32_t doepint;
+	/** Reserved. <i>Offset:B00h + (ep_num * 20h) + 0Ch</i> */
+	uint32_t reserved0C;
+	/** Device OUT Endpoint Transfer Size Register. <i>Offset:
+	 * B00h + (ep_num * 20h) + 10h</i> */
+	volatile uint32_t doeptsiz;
+	/** Device OUT Endpoint DMA Address Register. <i>Offset:B00h
+	 * + (ep_num * 20h) + 14h</i> */
+	volatile uint32_t doepdma;
+	/** Reserved. <i>Offset:B00h + 	 * (ep_num * 20h) + 18h</i> */
+	uint32_t unused;
+	/** Device OUT Endpoint DMA Buffer Register. <i>Offset:B00h
+	 * + (ep_num * 20h) + 1Ch</i> */
+	uint32_t doepdmab;
+} dwc_otg_dev_out_ep_regs_t;
+
+/**
+ * This union represents the bit fields in the Device EP Control
+ * Register.  Read the register into the <i>d32</i> member then
+ * set/clear the bits using the <i>b</i>it elements.
+ */
+typedef union depctl_data {
+	/** raw register data */
+	uint32_t d32;
+	/** register bits */
+	struct {
+		/** Maximum Packet Size
+		 * IN/OUT EPn
+		 * IN/OUT EP0 - 2 bits
+		 *	 2'b00: 64 Bytes
+		 *	 2'b01: 32
+		 *	 2'b10: 16
+		 *	 2'b11: 8 */
+		unsigned mps:11;
+#define DWC_DEP0CTL_MPS_64	 0
+#define DWC_DEP0CTL_MPS_32	 1
+#define DWC_DEP0CTL_MPS_16	 2
+#define DWC_DEP0CTL_MPS_8	 3
+
+		/** Next Endpoint
+		 * IN EPn/IN EP0
+		 * OUT EPn/OUT EP0 - reserved */
+		unsigned nextep:4;
+
+		/** USB Active Endpoint */
+		unsigned usbactep:1;
+
+		/** Endpoint DPID (INTR/Bulk IN and OUT endpoints)
+		 * This field contains the PID of the packet going to
+		 * be received or transmitted on this endpoint. The
+		 * application should program the PID of the first
+		 * packet going to be received or transmitted on this
+		 * endpoint , after the endpoint is
+		 * activated. Application use the SetD1PID and
+		 * SetD0PID fields of this register to program either
+		 * D0 or D1 PID.
+		 *
+		 * The encoding for this field is
+		 *	 - 0: D0
+		 *	 - 1: D1
+		 */
+		unsigned dpid:1;
+
+		/** NAK Status */
+		unsigned naksts:1;
+
+		/** Endpoint Type
+		 *	2'b00: Control
+		 *	2'b01: Isochronous
+		 *	2'b10: Bulk
+		 *	2'b11: Interrupt */
+		unsigned eptype:2;
+
+		/** Snoop Mode
+		 * OUT EPn/OUT EP0
+		 * IN EPn/IN EP0 - reserved */
+		unsigned snp:1;
+
+		/** Stall Handshake */
+		unsigned stall:1;
+
+		/** Tx Fifo Number
+		 * IN EPn/IN EP0
+		 * OUT EPn/OUT EP0 - reserved */
+		unsigned txfnum:4;
+
+		/** Clear NAK */
+		unsigned cnak:1;
+		/** Set NAK */
+		unsigned snak:1;
+		/** Set DATA0 PID (INTR/Bulk IN and OUT endpoints)
+		 * Writing to this field sets the Endpoint DPID (DPID)
+		 * field in this register to DATA0. Set Even
+		 * (micro)frame (SetEvenFr) (ISO IN and OUT Endpoints)
+		 * Writing to this field sets the Even/Odd
+		 * (micro)frame (EO_FrNum) field to even (micro)
+		 * frame.
+		 */
+		unsigned setd0pid:1;
+		/** Set DATA1 PID (INTR/Bulk IN and OUT endpoints)
+		 * Writing to this field sets the Endpoint DPID (DPID)
+		 * field in this register to DATA1 Set Odd
+		 * (micro)frame (SetOddFr) (ISO IN and OUT Endpoints)
+		 * Writing to this field sets the Even/Odd
+		 * (micro)frame (EO_FrNum) field to odd (micro) frame.
+		 */
+		unsigned setd1pid:1;
+
+		/** Endpoint Disable */
+		unsigned epdis:1;
+		/** Endpoint Enable */
+		unsigned epena:1;
+	} b;
+} depctl_data_t;
+
+/**
+ * This union represents the bit fields in the Device EP Transfer
+ * Size Register.  Read the register into the <i>d32</i> member then
+ * set/clear the bits using the <i>b</i>it elements.
+ */
+typedef union deptsiz_data {
+		/** raw register data */
+	uint32_t d32;
+		/** register bits */
+	struct {
+		/** Transfer size */
+		unsigned xfersize:19;
+/** Max packet count for EP (pow(2,10)-1) */
+#define MAX_PKT_CNT 1023
+		/** Packet Count */
+		unsigned pktcnt:10;
+		/** Multi Count - Periodic IN endpoints */
+		unsigned mc:2;
+		unsigned reserved:1;
+	} b;
+} deptsiz_data_t;
+
+/**
+ * This union represents the bit fields in the Device EP 0 Transfer
+ * Size Register.  Read the register into the <i>d32</i> member then
+ * set/clear the bits using the <i>b</i>it elements.
+ */
+typedef union deptsiz0_data {
+		/** raw register data */
+	uint32_t d32;
+		/** register bits */
+	struct {
+		/** Transfer size */
+		unsigned xfersize:7;
+				/** Reserved */
+		unsigned reserved7_18:12;
+		/** Packet Count */
+		unsigned pktcnt:2;
+				/** Reserved */
+		unsigned reserved21_28:8;
+				/**Setup Packet Count (DOEPTSIZ0 Only) */
+		unsigned supcnt:2;
+		unsigned reserved31;
+	} b;
+} deptsiz0_data_t;
+
+/////////////////////////////////////////////////
+// DMA Descriptor Specific Structures
+//
+
+/** Buffer status definitions */
+
+#define BS_HOST_READY	0x0
+#define BS_DMA_BUSY		0x1
+#define BS_DMA_DONE		0x2
+#define BS_HOST_BUSY	0x3
+
+/** Receive/Transmit status definitions */
+
+#define RTS_SUCCESS		0x0
+#define RTS_BUFFLUSH	0x1
+#define RTS_RESERVED	0x2
+#define RTS_BUFERR		0x3
+
+/**
+ * This union represents the bit fields in the DMA Descriptor
+ * status quadlet. Read the quadlet into the <i>d32</i> member then
+ * set/clear the bits using the <i>b</i>it, <i>b_iso_out</i> and
+ * <i>b_iso_in</i> elements.
+ */
+typedef union dev_dma_desc_sts {
+		/** raw register data */
+	uint32_t d32;
+		/** quadlet bits */
+	struct {
+		/** Received number of bytes */
+		unsigned bytes:16;
+		/** NAK bit - only for OUT EPs */
+		unsigned nak:1;
+		unsigned reserved17_22:6;
+		/** Multiple Transfer - only for OUT EPs */
+		unsigned mtrf:1;
+		/** Setup Packet received - only for OUT EPs */
+		unsigned sr:1;
+		/** Interrupt On Complete */
+		unsigned ioc:1;
+		/** Short Packet */
+		unsigned sp:1;
+		/** Last */
+		unsigned l:1;
+		/** Receive Status */
+		unsigned sts:2;
+		/** Buffer Status */
+		unsigned bs:2;
+	} b;
+
+//#ifdef DWC_EN_ISOC
+		/** iso out quadlet bits */
+	struct {
+		/** Received number of bytes */
+		unsigned rxbytes:11;
+
+		unsigned reserved11:1;
+		/** Frame Number */
+		unsigned framenum:11;
+		/** Received ISO Data PID */
+		unsigned pid:2;
+		/** Interrupt On Complete */
+		unsigned ioc:1;
+		/** Short Packet */
+		unsigned sp:1;
+		/** Last */
+		unsigned l:1;
+		/** Receive Status */
+		unsigned rxsts:2;
+		/** Buffer Status */
+		unsigned bs:2;
+	} b_iso_out;
+
+		/** iso in quadlet bits */
+	struct {
+		/** Transmited number of bytes */
+		unsigned txbytes:12;
+		/** Frame Number */
+		unsigned framenum:11;
+		/** Transmited ISO Data PID */
+		unsigned pid:2;
+		/** Interrupt On Complete */
+		unsigned ioc:1;
+		/** Short Packet */
+		unsigned sp:1;
+		/** Last */
+		unsigned l:1;
+		/** Transmit Status */
+		unsigned txsts:2;
+		/** Buffer Status */
+		unsigned bs:2;
+	} b_iso_in;
+//#endif                                /* DWC_EN_ISOC */
+} dev_dma_desc_sts_t;
+
+/**
+ * DMA Descriptor structure
+ *
+ * DMA Descriptor structure contains two quadlets:
+ * Status quadlet and Data buffer pointer.
+ */
+typedef struct dwc_otg_dev_dma_desc {
+	/** DMA Descriptor status quadlet */
+	dev_dma_desc_sts_t status;
+	/** DMA Descriptor data buffer pointer */
+	uint32_t buf;
+} dwc_otg_dev_dma_desc_t;
+
+/**
+ * The dwc_otg_dev_if structure contains information needed to manage
+ * the DWC_otg controller acting in device mode. It represents the
+ * programming view of the device-specific aspects of the controller.
+ */
+typedef struct dwc_otg_dev_if {
+	/** Pointer to device Global registers.
+	 * Device Global Registers starting at offset 800h
+	 */
+	dwc_otg_device_global_regs_t *dev_global_regs;
+#define DWC_DEV_GLOBAL_REG_OFFSET 0x800
+
+	/**
+	 * Device Logical IN Endpoint-Specific Registers 900h-AFCh
+	 */
+	dwc_otg_dev_in_ep_regs_t *in_ep_regs[MAX_EPS_CHANNELS];
+#define DWC_DEV_IN_EP_REG_OFFSET 0x900
+#define DWC_EP_REG_OFFSET 0x20
+
+	/** Device Logical OUT Endpoint-Specific Registers B00h-CFCh */
+	dwc_otg_dev_out_ep_regs_t *out_ep_regs[MAX_EPS_CHANNELS];
+#define DWC_DEV_OUT_EP_REG_OFFSET 0xB00
+
+	/* Device configuration information */
+	uint8_t speed;				 /**< Device Speed	0: Unknown, 1: LS, 2:FS, 3: HS */
+	uint8_t num_in_eps;		 /**< Number # of Tx EP range: 0-15 exept ep0 */
+	uint8_t num_out_eps;		 /**< Number # of Rx EP range: 0-15 exept ep 0*/
+
+	/** Size of periodic FIFOs (Bytes) */
+	uint16_t perio_tx_fifo_size[MAX_PERIO_FIFOS];
+
+	/** Size of Tx FIFOs (Bytes) */
+	uint16_t tx_fifo_size[MAX_TX_FIFOS];
+
+	/** Thresholding enable flags and length varaiables **/
+	uint16_t rx_thr_en;
+	uint16_t iso_tx_thr_en;
+	uint16_t non_iso_tx_thr_en;
+
+	uint16_t rx_thr_length;
+	uint16_t tx_thr_length;
+
+	/**
+	 * Pointers to the DMA Descriptors for EP0 Control
+	 * transfers (virtual and physical)
+	 */
+
+	/** 2 descriptors for SETUP packets */
+	dwc_dma_t dma_setup_desc_addr[2];
+	dwc_otg_dev_dma_desc_t *setup_desc_addr[2];
+
+	/** Pointer to Descriptor with latest SETUP packet */
+	dwc_otg_dev_dma_desc_t *psetup;
+
+	/** Index of current SETUP handler descriptor */
+	uint32_t setup_desc_index;
+
+	/** Descriptor for Data In or Status In phases */
+	dwc_dma_t dma_in_desc_addr;
+	dwc_otg_dev_dma_desc_t *in_desc_addr;
+
+	/** Descriptor for Data Out or Status Out phases */
+	dwc_dma_t dma_out_desc_addr;
+	dwc_otg_dev_dma_desc_t *out_desc_addr;
+
+	/** Setup Packet Detected - if set clear NAK when queueing */
+	uint32_t spd;
+	/** Isoc ep pointer on which incomplete happens */
+	void *isoc_ep;
+
+} dwc_otg_dev_if_t;
+
+/////////////////////////////////////////////////
+// Host Mode Register Structures
+//
+/**
+ * The Host Global Registers structure defines the size and relative
+ * field offsets for the Host Mode Global Registers.  Host Global
+ * Registers offsets 400h-7FFh.
+*/
+typedef struct dwc_otg_host_global_regs {
+	/** Host Configuration Register.   <i>Offset: 400h</i> */
+	volatile uint32_t hcfg;
+	/** Host Frame Interval Register.	<i>Offset: 404h</i> */
+	volatile uint32_t hfir;
+	/** Host Frame Number / Frame Remaining Register. <i>Offset: 408h</i> */
+	volatile uint32_t hfnum;
+	/** Reserved.	<i>Offset: 40Ch</i> */
+	uint32_t reserved40C;
+	/** Host Periodic Transmit FIFO/ Queue Status Register. <i>Offset: 410h</i> */
+	volatile uint32_t hptxsts;
+	/** Host All Channels Interrupt Register. <i>Offset: 414h</i> */
+	volatile uint32_t haint;
+	/** Host All Channels Interrupt Mask Register. <i>Offset: 418h</i> */
+	volatile uint32_t haintmsk;
+	/** Host Frame List Base Address Register . <i>Offset: 41Ch</i> */
+	volatile uint32_t hflbaddr;
+} dwc_otg_host_global_regs_t;
+
+/**
+ * This union represents the bit fields in the Host Configuration Register.
+ * Read the register into the <i>d32</i> member then set/clear the bits using
+ * the <i>b</i>it elements. Write the <i>d32</i> member to the hcfg register.
+ */
+typedef union hcfg_data {
+	/** raw register data */
+	uint32_t d32;
+
+	/** register bits */
+	struct {
+		/** FS/LS Phy Clock Select */
+		unsigned fslspclksel:2;
+#define DWC_HCFG_30_60_MHZ 0
+#define DWC_HCFG_48_MHZ	   1
+#define DWC_HCFG_6_MHZ	   2
+
+		/** FS/LS Only Support */
+		unsigned fslssupp:1;
+		unsigned reserved3_6:4;
+		/** Enable 32-KHz Suspend Mode */
+		unsigned ena32khzs:1;
+		/** Resume Validation Periiod */
+		unsigned resvalid:8;
+		unsigned reserved16_22:7;
+		/** Enable Scatter/gather DMA in Host mode */
+		unsigned descdma:1;
+		/** Frame List Entries */
+		unsigned frlisten:2;
+		/** Enable Periodic Scheduling */
+		unsigned perschedena:1;
+		unsigned reserved27_30:4;
+		unsigned modechtimen:1;
+	} b;
+} hcfg_data_t;
+
+/**
+ * This union represents the bit fields in the Host Frame Remaing/Number
+ * Register. 
+ */
+typedef union hfir_data {
+	/** raw register data */
+	uint32_t d32;
+
+	/** register bits */
+	struct {
+		unsigned frint:16;
+		unsigned hfirrldctrl:1;
+		unsigned reserved:15;
+	} b;
+} hfir_data_t;
+
+/**
+ * This union represents the bit fields in the Host Frame Remaing/Number
+ * Register. 
+ */
+typedef union hfnum_data {
+	/** raw register data */
+	uint32_t d32;
+
+	/** register bits */
+	struct {
+		unsigned frnum:16;
+#define DWC_HFNUM_MAX_FRNUM 0x3FFF
+		unsigned frrem:16;
+	} b;
+} hfnum_data_t;
+
+typedef union hptxsts_data {
+	/** raw register data */
+	uint32_t d32;
+
+	/** register bits */
+	struct {
+		unsigned ptxfspcavail:16;
+		unsigned ptxqspcavail:8;
+		/** Top of the Periodic Transmit Request Queue
+		 *	- bit 24 - Terminate (last entry for the selected channel)
+		 *	- bits 26:25 - Token Type
+		 *	  - 2'b00 - Zero length
+		 *	  - 2'b01 - Ping
+		 *	  - 2'b10 - Disable
+		 *	- bits 30:27 - Channel Number
+		 *	- bit 31 - Odd/even microframe
+		 */
+		unsigned ptxqtop_terminate:1;
+		unsigned ptxqtop_token:2;
+		unsigned ptxqtop_chnum:4;
+		unsigned ptxqtop_odd:1;
+	} b;
+} hptxsts_data_t;
+
+/**
+ * This union represents the bit fields in the Host Port Control and Status
+ * Register. Read the register into the <i>d32</i> member then set/clear the
+ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
+ * hprt0 register.
+ */
+typedef union hprt0_data {
+	/** raw register data */
+	uint32_t d32;
+	/** register bits */
+	struct {
+		unsigned prtconnsts:1;
+		unsigned prtconndet:1;
+		unsigned prtena:1;
+		unsigned prtenchng:1;
+		unsigned prtovrcurract:1;
+		unsigned prtovrcurrchng:1;
+		unsigned prtres:1;
+		unsigned prtsusp:1;
+		unsigned prtrst:1;
+		unsigned reserved9:1;
+		unsigned prtlnsts:2;
+		unsigned prtpwr:1;
+		unsigned prttstctl:4;
+		unsigned prtspd:2;
+#define DWC_HPRT0_PRTSPD_HIGH_SPEED 0
+#define DWC_HPRT0_PRTSPD_FULL_SPEED 1
+#define DWC_HPRT0_PRTSPD_LOW_SPEED	2
+		unsigned reserved19_31:13;
+	} b;
+} hprt0_data_t;
+
+/**
+ * This union represents the bit fields in the Host All Interrupt
+ * Register. 
+ */
+typedef union haint_data {
+	/** raw register data */
+	uint32_t d32;
+	/** register bits */
+	struct {
+		unsigned ch0:1;
+		unsigned ch1:1;
+		unsigned ch2:1;
+		unsigned ch3:1;
+		unsigned ch4:1;
+		unsigned ch5:1;
+		unsigned ch6:1;
+		unsigned ch7:1;
+		unsigned ch8:1;
+		unsigned ch9:1;
+		unsigned ch10:1;
+		unsigned ch11:1;
+		unsigned ch12:1;
+		unsigned ch13:1;
+		unsigned ch14:1;
+		unsigned ch15:1;
+		unsigned reserved:16;
+	} b;
+
+	struct {
+		unsigned chint:16;
+		unsigned reserved:16;
+	} b2;
+} haint_data_t;
+
+/**
+ * This union represents the bit fields in the Host All Interrupt
+ * Register. 
+ */
+typedef union haintmsk_data {
+	/** raw register data */
+	uint32_t d32;
+	/** register bits */
+	struct {
+		unsigned ch0:1;
+		unsigned ch1:1;
+		unsigned ch2:1;
+		unsigned ch3:1;
+		unsigned ch4:1;
+		unsigned ch5:1;
+		unsigned ch6:1;
+		unsigned ch7:1;
+		unsigned ch8:1;
+		unsigned ch9:1;
+		unsigned ch10:1;
+		unsigned ch11:1;
+		unsigned ch12:1;
+		unsigned ch13:1;
+		unsigned ch14:1;
+		unsigned ch15:1;
+		unsigned reserved:16;
+	} b;
+
+	struct {
+		unsigned chint:16;
+		unsigned reserved:16;
+	} b2;
+} haintmsk_data_t;
+
+/**
+ * Host Channel Specific Registers. <i>500h-5FCh</i>
+ */
+typedef struct dwc_otg_hc_regs {
+	/** Host Channel 0 Characteristic Register. <i>Offset: 500h + (chan_num * 20h) + 00h</i> */
+	volatile uint32_t hcchar;
+	/** Host Channel 0 Split Control Register. <i>Offset: 500h + (chan_num * 20h) + 04h</i> */
+	volatile uint32_t hcsplt;
+	/** Host Channel 0 Interrupt Register. <i>Offset: 500h + (chan_num * 20h) + 08h</i> */
+	volatile uint32_t hcint;
+	/** Host Channel 0 Interrupt Mask Register. <i>Offset: 500h + (chan_num * 20h) + 0Ch</i> */
+	volatile uint32_t hcintmsk;
+	/** Host Channel 0 Transfer Size Register. <i>Offset: 500h + (chan_num * 20h) + 10h</i> */
+	volatile uint32_t hctsiz;
+	/** Host Channel 0 DMA Address Register. <i>Offset: 500h + (chan_num * 20h) + 14h</i> */
+	volatile uint32_t hcdma;
+	volatile uint32_t reserved;
+	/** Host Channel 0 DMA Buffer Address Register. <i>Offset: 500h + (chan_num * 20h) + 1Ch</i> */
+	volatile uint32_t hcdmab;
+} dwc_otg_hc_regs_t;
+
+/**
+ * This union represents the bit fields in the Host Channel Characteristics
+ * Register. Read the register into the <i>d32</i> member then set/clear the
+ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
+ * hcchar register.
+ */
+typedef union hcchar_data {
+	/** raw register data */
+	uint32_t d32;
+
+	/** register bits */
+	struct {
+		/** Maximum packet size in bytes */
+		unsigned mps:11;
+
+		/** Endpoint number */
+		unsigned epnum:4;
+
+		/** 0: OUT, 1: IN */
+		unsigned epdir:1;
+
+		unsigned reserved:1;
+
+		/** 0: Full/high speed device, 1: Low speed device */
+		unsigned lspddev:1;
+
+		/** 0: Control, 1: Isoc, 2: Bulk, 3: Intr */
+		unsigned eptype:2;
+
+		/** Packets per frame for periodic transfers. 0 is reserved. */
+		unsigned multicnt:2;
+
+		/** Device address */
+		unsigned devaddr:7;
+
+		/**
+		 * Frame to transmit periodic transaction.
+		 * 0: even, 1: odd
+		 */
+		unsigned oddfrm:1;
+
+		/** Channel disable */
+		unsigned chdis:1;
+
+		/** Channel enable */
+		unsigned chen:1;
+	} b;
+} hcchar_data_t;
+
+typedef union hcsplt_data {
+	/** raw register data */
+	uint32_t d32;
+
+	/** register bits */
+	struct {
+		/** Port Address */
+		unsigned prtaddr:7;
+
+		/** Hub Address */
+		unsigned hubaddr:7;
+
+		/** Transaction Position */
+		unsigned xactpos:2;
+#define DWC_HCSPLIT_XACTPOS_MID 0
+#define DWC_HCSPLIT_XACTPOS_END 1
+#define DWC_HCSPLIT_XACTPOS_BEGIN 2
+#define DWC_HCSPLIT_XACTPOS_ALL 3
+
+		/** Do Complete Split */
+		unsigned compsplt:1;
+
+		/** Reserved */
+		unsigned reserved:14;
+
+		/** Split Enble */
+		unsigned spltena:1;
+	} b;
+} hcsplt_data_t;
+
+/**
+ * This union represents the bit fields in the Host All Interrupt
+ * Register. 
+ */
+typedef union hcint_data {
+	/** raw register data */
+	uint32_t d32;
+	/** register bits */
+	struct {
+		/** Transfer Complete */
+		unsigned xfercomp:1;
+		/** Channel Halted */
+		unsigned chhltd:1;
+		/** AHB Error */
+		unsigned ahberr:1;
+		/** STALL Response Received */
+		unsigned stall:1;
+		/** NAK Response Received */
+		unsigned nak:1;
+		/** ACK Response Received */
+		unsigned ack:1;
+		/** NYET Response Received */
+		unsigned nyet:1;
+		/** Transaction Err */
+		unsigned xacterr:1;
+		/** Babble Error */
+		unsigned bblerr:1;
+		/** Frame Overrun */
+		unsigned frmovrun:1;
+		/** Data Toggle Error */
+		unsigned datatglerr:1;
+		/** Buffer Not Available (only for DDMA mode) */
+		unsigned bna:1;
+		/** Exessive transaction error (only for DDMA mode) */
+		unsigned xcs_xact:1;
+		/** Frame List Rollover interrupt */
+		unsigned frm_list_roll:1;
+		/** Reserved */
+		unsigned reserved14_31:18;
+	} b;
+} hcint_data_t;
+
+/**
+ * This union represents the bit fields in the Host Channel Interrupt Mask
+ * Register. Read the register into the <i>d32</i> member then set/clear the
+ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
+ * hcintmsk register.
+ */
+typedef union hcintmsk_data {
+	/** raw register data */
+	uint32_t d32;
+
+	/** register bits */
+	struct {
+		unsigned xfercompl:1;
+		unsigned chhltd:1;
+		unsigned ahberr:1;
+		unsigned stall:1;
+		unsigned nak:1;
+		unsigned ack:1;
+		unsigned nyet:1;
+		unsigned xacterr:1;
+		unsigned bblerr:1;
+		unsigned frmovrun:1;
+		unsigned datatglerr:1;
+		unsigned bna:1;
+		unsigned xcs_xact:1;
+		unsigned frm_list_roll:1;
+		unsigned reserved14_31:18;
+	} b;
+} hcintmsk_data_t;
+
+/**
+ * This union represents the bit fields in the Host Channel Transfer Size
+ * Register. Read the register into the <i>d32</i> member then set/clear the
+ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
+ * hcchar register.
+ */
+
+typedef union hctsiz_data {
+	/** raw register data */
+	uint32_t d32;
+
+	/** register bits */
+	struct {
+		/** Total transfer size in bytes */
+		unsigned xfersize:19;
+
+		/** Data packets to transfer */
+		unsigned pktcnt:10;
+
+		/**
+		 * Packet ID for next data packet
+		 * 0: DATA0
+		 * 1: DATA2
+		 * 2: DATA1
+		 * 3: MDATA (non-Control), SETUP (Control)
+		 */
+		unsigned pid:2;
+#define DWC_HCTSIZ_DATA0 0
+#define DWC_HCTSIZ_DATA1 2
+#define DWC_HCTSIZ_DATA2 1
+#define DWC_HCTSIZ_MDATA 3
+#define DWC_HCTSIZ_SETUP 3
+
+		/** Do PING protocol when 1 */
+		unsigned dopng:1;
+	} b;
+
+	/** register bits */
+	struct {
+		/** Scheduling information */
+		unsigned schinfo:8;
+
+		/** Number of transfer descriptors.
+		 * Max value:
+		 * 64 in general,
+		 * 256 only for HS isochronous endpoint.
+		 */
+		unsigned ntd:8;
+
+		/** Data packets to transfer */
+		unsigned reserved16_28:13;
+
+		/**
+		 * Packet ID for next data packet
+		 * 0: DATA0
+		 * 1: DATA2
+		 * 2: DATA1
+		 * 3: MDATA (non-Control)
+		 */
+		unsigned pid:2;
+
+		/** Do PING protocol when 1 */
+		unsigned dopng:1;
+	} b_ddma;
+} hctsiz_data_t;
+
+/**
+ * This union represents the bit fields in the Host DMA Address 
+ * Register used in Descriptor DMA mode.
+ */
+typedef union hcdma_data {
+	/** raw register data */
+	uint32_t d32;
+	/** register bits */
+	struct {
+		unsigned reserved0_2:3;
+		/** Current Transfer Descriptor. Not used for ISOC */
+		unsigned ctd:8;
+		/** Start Address of Descriptor List */
+		unsigned dma_addr:21;
+	} b;
+} hcdma_data_t;
+
+/**
+ * This union represents the bit fields in the DMA Descriptor
+ * status quadlet for host mode. Read the quadlet into the <i>d32</i> member then
+ * set/clear the bits using the <i>b</i>it elements.
+ */
+typedef union host_dma_desc_sts {
+	/** raw register data */
+	uint32_t d32;
+	/** quadlet bits */
+
+	/* for non-isochronous  */
+	struct {
+		/** Number of bytes */
+		unsigned n_bytes:17;
+		/** QTD offset to jump when Short Packet received - only for IN EPs */
+		unsigned qtd_offset:6;
+		/**
+		 * Set to request the core to jump to alternate QTD if
+		 * Short Packet received - only for IN EPs
+		 */
+		unsigned a_qtd:1;
+		 /**
+		  * Setup Packet bit. When set indicates that buffer contains
+		  * setup packet.
+		  */
+		unsigned sup:1;
+		/** Interrupt On Complete */
+		unsigned ioc:1;
+		/** End of List */
+		unsigned eol:1;
+		unsigned reserved27:1;
+		/** Rx/Tx Status */
+		unsigned sts:2;
+#define DMA_DESC_STS_PKTERR	1
+		unsigned reserved30:1;
+		/** Active Bit */
+		unsigned a:1;
+	} b;
+	/* for isochronous */
+	struct {
+		/** Number of bytes */
+		unsigned n_bytes:12;
+		unsigned reserved12_24:13;
+		/** Interrupt On Complete */
+		unsigned ioc:1;
+		unsigned reserved26_27:2;
+		/** Rx/Tx Status */
+		unsigned sts:2;
+		unsigned reserved30:1;
+		/** Active Bit */
+		unsigned a:1;
+	} b_isoc;
+} host_dma_desc_sts_t;
+
+#define	MAX_DMA_DESC_SIZE		131071
+#define MAX_DMA_DESC_NUM_GENERIC	64
+#define MAX_DMA_DESC_NUM_HS_ISOC	256
+#define MAX_FRLIST_EN_NUM		64
+/**
+ * Host-mode DMA Descriptor structure
+ *
+ * DMA Descriptor structure contains two quadlets:
+ * Status quadlet and Data buffer pointer.
+ */
+typedef struct dwc_otg_host_dma_desc {
+	/** DMA Descriptor status quadlet */
+	host_dma_desc_sts_t status;
+	/** DMA Descriptor data buffer pointer */
+	uint32_t buf;
+} dwc_otg_host_dma_desc_t;
+
+/** OTG Host Interface Structure.
+ *
+ * The OTG Host Interface Structure structure contains information
+ * needed to manage the DWC_otg controller acting in host mode. It
+ * represents the programming view of the host-specific aspects of the
+ * controller.
+ */
+typedef struct dwc_otg_host_if {
+	/** Host Global Registers starting at offset 400h.*/
+	dwc_otg_host_global_regs_t *host_global_regs;
+#define DWC_OTG_HOST_GLOBAL_REG_OFFSET 0x400
+
+	/** Host Port 0 Control and Status Register */
+	volatile uint32_t *hprt0;
+#define DWC_OTG_HOST_PORT_REGS_OFFSET 0x440
+
+	/** Host Channel Specific Registers at offsets 500h-5FCh. */
+	dwc_otg_hc_regs_t *hc_regs[MAX_EPS_CHANNELS];
+#define DWC_OTG_HOST_CHAN_REGS_OFFSET 0x500
+#define DWC_OTG_CHAN_REGS_OFFSET 0x20
+
+	/* Host configuration information */
+	/** Number of Host Channels (range: 1-16) */
+	uint8_t num_host_channels;
+	/** Periodic EPs supported (0: no, 1: yes) */
+	uint8_t perio_eps_supported;
+	/** Periodic Tx FIFO Size (Only 1 host periodic Tx FIFO) */
+	uint16_t perio_tx_fifo_size;
+
+} dwc_otg_host_if_t;
+
+/**
+ * This union represents the bit fields in the Power and Clock Gating Control
+ * Register. Read the register into the <i>d32</i> member then set/clear the
+ * bits using the <i>b</i>it elements.
+ */
+typedef union pcgcctl_data {
+	/** raw register data */
+	uint32_t d32;
+
+	/** register bits */
+	struct {
+		/** Stop Pclk */
+		unsigned stoppclk:1;
+		/** Gate Hclk */
+		unsigned gatehclk:1;
+		/** Power Clamp */
+		unsigned pwrclmp:1;
+		/** Reset Power Down Modules */
+		unsigned rstpdwnmodule:1;
+		/** Reserved */
+		unsigned reserved:1;
+		/** Enable Sleep Clock Gating (Enbl_L1Gating) */
+		unsigned enbl_sleep_gating:1;
+		/** PHY In Sleep (PhySleep) */
+		unsigned phy_in_sleep:1;
+		/** Deep Sleep*/
+		unsigned deep_sleep:1;
+		unsigned resetaftsusp:1;
+		unsigned restoremode:1;
+		unsigned enbl_extnd_hiber:1;
+		unsigned extnd_hiber_pwrclmp:1;
+		unsigned extnd_hiber_switch:1;
+		unsigned ess_reg_restored:1;
+		unsigned prt_clk_sel:2;
+		unsigned port_power:1;
+		unsigned max_xcvrselect:2;
+		unsigned max_termsel:1;
+		unsigned mac_dev_addr:7;
+		unsigned p2hd_dev_enum_spd:2;
+		unsigned p2hd_prt_spd:2;
+		unsigned if_dev_mode:1;
+	} b;
+} pcgcctl_data_t;
+
+/**
+ * This union represents the bit fields in the Global Data FIFO Software
+ * Configuration Register. Read the register into the <i>d32</i> member then
+ * set/clear the bits using the <i>b</i>it elements.
+ */
+typedef union gdfifocfg_data {
+	/* raw register data */
+	uint32_t d32;
+	/** register bits */
+	struct {
+		/** OTG Data FIFO depth */
+		unsigned gdfifocfg:16;
+		/** Start address of EP info controller */
+		unsigned epinfobase:16;
+	} b;
+} gdfifocfg_data_t;
+
+/**
+ * This union represents the bit fields in the Global Power Down Register
+ * Register. Read the register into the <i>d32</i> member then set/clear the
+ * bits using the <i>b</i>it elements.
+ */
+typedef union gpwrdn_data {
+	/* raw register data */
+	uint32_t d32;
+
+	/** register bits */
+	struct {
+		/** PMU Interrupt Select */
+		unsigned pmuintsel:1;
+		/** PMU Active */
+		unsigned pmuactv:1;
+		/** Restore */
+		unsigned restore:1;
+		/** Power Down Clamp */
+		unsigned pwrdnclmp:1;
+		/** Power Down Reset */
+		unsigned pwrdnrstn:1;
+		/** Power Down Switch */
+		unsigned pwrdnswtch:1;
+		/** Disable VBUS */
+		unsigned dis_vbus:1;
+		/** Line State Change */
+		unsigned lnstschng:1;
+		/** Line state change mask */
+		unsigned lnstchng_msk:1;
+		/** Reset Detected */
+		unsigned rst_det:1;
+		/** Reset Detect mask */
+		unsigned rst_det_msk:1;
+		/** Disconnect Detected */
+		unsigned disconn_det:1;
+		/** Disconnect Detect mask */
+		unsigned disconn_det_msk:1;
+		/** Connect Detected*/
+		unsigned connect_det:1;
+		/** Connect Detected Mask*/
+		unsigned connect_det_msk:1;
+		/** SRP Detected */
+		unsigned srp_det:1;
+		/** SRP Detect mask */
+		unsigned srp_det_msk:1;
+		/** Status Change Interrupt */
+		unsigned sts_chngint:1;
+		/** Status Change Interrupt Mask */
+		unsigned sts_chngint_msk:1;
+		/** Line State */
+		unsigned linestate:2;
+		/** Indicates current mode(status of IDDIG signal) */
+		unsigned idsts:1;
+		/** B Session Valid signal status*/
+		unsigned bsessvld:1;
+		/** ADP Event Detected */
+		unsigned adp_int:1;
+		/** Multi Valued ID pin */
+		unsigned mult_val_id_bc:5;
+		/** Reserved 24_31 */
+		unsigned reserved29_31:3;
+	} b;
+} gpwrdn_data_t;
+
+#endif