Initial file dump from open source releaseHEADmaster

1 files changed, 1244 insertions, 0 deletions

diff --git a/drivers/regulator/sc2711-regulator.c b/drivers/regulator/sc2711-regulator.c
new file mode 100644
index 00000000..d4e0fafc
--- /dev/null
+++ b/drivers/regulator/sc2711-regulator.c
@@ -0,0 +1,1244 @@
+/*
+ * Copyright (C) 2013 Spreadtrum Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Fixes:
+ *	0.2 unprotect dcdc/ldo before turn on and off
+ *		remove dcdc/ldo calibration
+ * To Fix:
+ *
+ *
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/spinlock.h>
+#include <linux/debugfs.h>
+#include <linux/slab.h>
+#include <linux/sort.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regulator/of_regulator.h>
+
+#include <linux/regulator/consumer.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+#include <mach/hardware.h>
+#include <mach/sci.h>
+#include <mach/sci_glb_regs.h>
+#include <mach/adi.h>
+#include <mach/adc.h>
+#include <mach/arch_misc.h>
+
+#define REGULATOR_ROOT_DIR	"sprd-regulator"
+
+#undef debug
+#define debug(format, arg...) pr_info("regu: " "@@@%s: " format, __func__, ## arg)
+#define debug0(format, arg...)	//pr_debug("regu: " "@@@%s: " format, __func__, ## arg)
+#define debug2(format, arg...)	pr_debug("regu: " "@@@%s: " format, __func__, ## arg)
+
+#ifndef	ANA_REG_OR
+#define	ANA_REG_OR(_r, _b)	sci_adi_write(_r, _b, 0)
+#endif
+
+#ifndef	ANA_REG_BIC
+#define	ANA_REG_BIC(_r, _b)	sci_adi_write(_r, 0, _b)
+#endif
+
+#ifndef	ANA_REG_GET
+#define	ANA_REG_GET(_r)		sci_adi_read(_r)
+#endif
+
+#ifndef	ANA_REG_SET
+#define	ANA_REG_SET(_r, _v, _m)	sci_adi_write((_r), ((_v) & (_m)), (_m))
+#endif
+
+struct sci_regulator_regs {
+	int typ;
+	u32 pd_set, pd_set_bit;
+	/**
+	 * at new feature, some LDOs had only set, no rst bits.
+	 * and DCDCs voltage and trimming controller is the same register
+	 */
+	u32 pd_rst, pd_rst_bit;
+	u32 slp_ctl, slp_ctl_bit;
+	u32 vol_trm, vol_trm_bits;
+	u32 cal_ctl, cal_ctl_bits;
+	u32 vol_def;
+	u32 vol_ctl, vol_ctl_bits;
+	u32 vol_sel_cnt, vol_sel[];
+};
+
+struct sci_regulator_data {
+	struct regulator_dev *rdev;
+};
+
+struct sci_regulator_desc {
+	struct regulator_desc desc;
+	struct sci_regulator_ops *ops;
+	struct sci_regulator_regs *regs;
+	struct sci_regulator_data data;	/* FIXME: dynamic */
+#if defined(CONFIG_DEBUG_FS)
+	struct dentry *debugfs;
+#endif
+};
+
+enum {
+	VDD_TYP_LDO = 0,
+	VDD_TYP_LDO_D = 1,
+	VDD_TYP_DCDC = 2,
+	VDD_TYP_LPREF = 3,
+	VDD_TYP_BOOST = 4,
+};
+
+#define REGU_VERIFY_DLY	(1000)	/*ms */
+
+static u16 ana_status_bondopt4;
+static u32 ana_chip_id;
+
+static DEFINE_MUTEX(adc_chan_mutex);
+extern int sci_efuse_calibration_get(u32 * p_cal_data);
+
+#define SCI_REGU_REG(VDD, TYP, PD_SET, SET_BIT, PD_RST, RST_BIT, SLP_CTL, SLP_CTL_BIT, \
+                     VOL_TRM, VOL_TRM_BITS, CAL_CTL, CAL_CTL_BITS, VOL_DEF, \
+                     VOL_CTL, VOL_CTL_BITS, VOL_SEL_CNT, ...)   \
+do { 														\
+	static struct sci_regulator_regs REGS_##VDD = {	\
+		.typ		= TYP,									\
+		.pd_set = PD_SET,                           		\
+		.pd_set_bit = SET_BIT,                      		\
+		.pd_rst = PD_RST,                           		\
+		.pd_rst_bit = RST_BIT,                      		\
+		.slp_ctl = SLP_CTL,                         		\
+		.slp_ctl_bit = SLP_CTL_BIT,                 		\
+		.vol_trm = VOL_TRM,                                 \
+		.vol_trm_bits = VOL_TRM_BITS,                       \
+		.cal_ctl = CAL_CTL, 								\
+		.cal_ctl_bits = CAL_CTL_BITS,						\
+		.vol_def = VOL_DEF,									\
+		.vol_ctl = VOL_CTL,                         		\
+		.vol_ctl_bits = VOL_CTL_BITS,               		\
+		.vol_sel_cnt = VOL_SEL_CNT,                 		\
+		.vol_sel = {__VA_ARGS__},                   		\
+	};														\
+	static struct sci_regulator_desc DESC_##VDD = {			\
+		.desc.name = #VDD,									\
+		.desc.id = 0,										\
+		.desc.ops = 0,										\
+		.desc.type = REGULATOR_VOLTAGE,						\
+		.desc.owner = THIS_MODULE,							\
+		.regs = &REGS_##VDD,								\
+	};														\
+	sci_regulator_register(pdev, &DESC_##VDD);				\
+} while (0)
+
+static struct sci_regulator_desc *__get_desc(struct regulator_dev *rdev)
+{
+	return (struct sci_regulator_desc *)rdev->desc;
+}
+
+/* standard ldo ops*/
+static int ldo_turn_on(struct regulator_dev *rdev)
+{
+	struct sci_regulator_desc *desc = __get_desc(rdev);
+	const struct sci_regulator_regs *regs = desc->regs;
+
+	debug0("regu %p (%s), set %08x[%d], rst %08x[%d]\n", regs,
+	       desc->desc.name, regs->pd_set, __ffs(regs->pd_set_bit),
+	       regs->pd_rst, __ffs(regs->pd_rst_bit));
+
+	if (regs->pd_set == ANA_REG_GLB_LDO_DCDC_PD)
+		sci_adi_raw_write(ANA_REG_GLB_PWR_WR_PROT_VALUE,
+				  BITS_PWR_WR_PROT_VALUE(0x6e7f));
+
+	if (regs->pd_rst)
+		ANA_REG_OR(regs->pd_rst, regs->pd_rst_bit);
+
+	if (regs->pd_set)
+		ANA_REG_BIC(regs->pd_set, regs->pd_set_bit);
+
+	if (regs->pd_set == ANA_REG_GLB_LDO_DCDC_PD)
+		sci_adi_raw_write(ANA_REG_GLB_PWR_WR_PROT_VALUE, 0);
+
+	debug2("regu %p (%s), turn on\n", regs, desc->desc.name);
+	return 0;
+}
+
+static int ldo_turn_off(struct regulator_dev *rdev)
+{
+	struct sci_regulator_desc *desc = __get_desc(rdev);
+	const struct sci_regulator_regs *regs = desc->regs;
+
+	debug0("regu %p (%s), set %08x[%d], rst %08x[%d]\n", regs,
+	       desc->desc.name, regs->pd_set, __ffs(regs->pd_set_bit),
+	       regs->pd_rst, __ffs(regs->pd_rst_bit));
+
+#if !defined(CONFIG_REGULATOR_CAL_DUMMY)
+	if (regs->pd_set == ANA_REG_GLB_LDO_DCDC_PD)
+		sci_adi_raw_write(ANA_REG_GLB_PWR_WR_PROT_VALUE,
+				  BITS_PWR_WR_PROT_VALUE(0x6e7f));
+
+	if (regs->pd_set)
+		ANA_REG_OR(regs->pd_set, regs->pd_set_bit);
+
+	if (regs->pd_rst)
+		ANA_REG_BIC(regs->pd_rst, regs->pd_rst_bit);
+
+	if (regs->pd_set == ANA_REG_GLB_LDO_DCDC_PD)
+		sci_adi_raw_write(ANA_REG_GLB_PWR_WR_PROT_VALUE, 0);
+
+#endif
+
+	debug2("regu %p (%s), turn off\n", regs, desc->desc.name);
+	return 0;
+}
+
+static int ldo_is_on(struct regulator_dev *rdev)
+{
+	int ret = -EINVAL;
+	struct sci_regulator_desc *desc = __get_desc(rdev);
+	const struct sci_regulator_regs *regs = desc->regs;
+
+	debug0("regu %p (%s), set %08x[%d], rst %08x[%d]\n", regs,
+	       desc->desc.name, regs->pd_set, __ffs(regs->pd_set_bit),
+	       regs->pd_rst, __ffs(regs->pd_rst_bit));
+
+	if (regs->pd_rst && regs->pd_set) {
+		/*for pd_rst has higher prioty than pd_set, what's more, their reset values are the same, 0 */
+		ret = ! !(ANA_REG_GET(regs->pd_rst) & regs->pd_rst_bit);
+		/* FIXME: when reset, pd_set & pd_rst are all zero, always get here */
+		if (ret == ! !(ANA_REG_GET(regs->pd_set) & regs->pd_set_bit))
+			ret = -EINVAL;
+	} else if (regs->pd_rst) {
+		ret = ! !(ANA_REG_GET(regs->pd_rst) & regs->pd_rst_bit);
+	} else if (regs->pd_set) {	/* new feature */
+		ret = !(ANA_REG_GET(regs->pd_set) & regs->pd_set_bit);
+	}
+
+	debug2("regu %p (%s) return %d\n", regs, desc->desc.name, ret);
+	return ret;
+}
+
+#if 0				/* FIXME: todo later */
+static int ldo_enable_time(struct regulator_dev *rdev)
+{
+	return 1000 * 1;	/*Microseconds */
+}
+#endif
+
+static int ldo_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+	struct sci_regulator_desc *desc = __get_desc(rdev);
+	const struct sci_regulator_regs *regs = desc->regs;
+
+	debug("regu %p (%s), slp %08x[%d] mode %x\n", regs, desc->desc.name,
+	      regs->slp_ctl, regs->slp_ctl_bit, mode);
+
+	if (!regs->slp_ctl)
+		return -EINVAL;
+
+	if (mode == REGULATOR_MODE_STANDBY) {	/* disable auto slp */
+		ANA_REG_BIC(regs->slp_ctl, regs->slp_ctl_bit);
+	} else {
+		ANA_REG_OR(regs->slp_ctl, regs->slp_ctl_bit);
+	}
+	return 0;
+}
+
+static int ldo_set_voltage(struct regulator_dev *rdev, int min_uV,
+			   int max_uV, unsigned *selector)
+{
+	struct sci_regulator_desc *desc = __get_desc(rdev);
+	const struct sci_regulator_regs *regs = desc->regs;
+	int mv = min_uV / 1000;
+	int ret = -EINVAL;
+
+	debug("regu %p (%s) %d %d\n", regs, desc->desc.name, min_uV, max_uV);
+
+	if (!regs->vol_ctl && regs->vol_trm && regs->vol_sel_cnt == 2) {
+		int shft = __ffs(regs->vol_trm_bits);
+		u32 trim =	/* vol_sel[0]: output (mV), [1]:step (uV) */
+		    DIV_ROUND_UP((mv - regs->vol_sel[0]) * 1000,
+				 regs->vol_sel[1]);
+
+		ret = trim > (regs->vol_trm_bits >> shft);
+		WARN(0 != ret,
+		     "warning: regulator (%s) not support %dmV\n",
+		     desc->desc.name, mv);
+
+		if (0 == ret) {
+			ANA_REG_SET(regs->vol_trm,
+				    trim << __ffs(regs->vol_trm_bits),
+				    regs->vol_trm_bits);
+		}
+		return ret;
+	}
+
+	return ret;
+}
+
+static int ldo_get_voltage(struct regulator_dev *rdev)
+{
+	struct sci_regulator_desc *desc = __get_desc(rdev);
+	const struct sci_regulator_regs *regs = desc->regs;
+	u32 vol;
+
+	debug0("regu %p (%s), vol ctl %08x, shft %d, mask %08x\n",
+	       regs, desc->desc.name, regs->vol_ctl, 0, regs->vol_ctl_bits);
+
+	if (!regs->vol_ctl && regs->vol_trm && regs->vol_sel_cnt == 2) {
+		int shft = __ffs(regs->vol_trm_bits);
+		u32 trim =
+		    (ANA_REG_GET(regs->vol_trm) & regs->vol_trm_bits) >> shft;
+		vol = regs->vol_sel[0] * 1000 + trim * regs->vol_sel[1];
+		debug2("regu %p (%s), voltage %d\n", regs, desc->desc.name,
+		       vol);
+		return vol;
+	}
+
+	return -EFAULT;
+}
+
+/* FIXME: get dcdc cal offset config from uboot */
+#define DCDC_CAL_CONF_BASE	(SPRD_IRAM0_BASE + 0x1f00)
+#define DCDC_MAX_CNT		(4)
+struct dcdc_cal_t {
+	char name[32];
+	int cal_vol;
+};
+
+typedef struct {
+	u16 ideal_vol;
+	const char name[14];
+}vol_para_t;
+
+#define PP_VOL_PARA		( 0x50005c20 )	/* assert in iram2 */
+#define TO_IRAM2(_p_)	( SPRD_IRAM2_BASE + (u32)(_p_) - SPRD_IRAM2_PHYS )
+#define IN_IRAM2(_p_)	( (u32)(_p_) >= SPRD_IRAM2_PHYS && (u32)(_p_) < SPRD_IRAM2_PHYS + SPRD_IRAM2_SIZE )
+
+int regulator_default_get(const char con_id[])
+{
+	int i = 0, res = 0;
+	vol_para_t *pvol_para = (vol_para_t *)__raw_readl((void *)TO_IRAM2(PP_VOL_PARA));
+
+	if (!(IN_IRAM2(pvol_para)))
+		return 0;
+
+	pvol_para = (vol_para_t *)TO_IRAM2(pvol_para);
+
+	if(strcmp((pvol_para)[0].name, "volpara_begin") || (0xfaed != (pvol_para)[0].ideal_vol))
+		return 0;
+
+	while(0 != strcmp((pvol_para)[i++].name, "volpara_end")) {
+		if (0 == strcmp((pvol_para)[i].name, con_id)) {
+			debug("%s name %s, ideal_vol %d\n", __func__, (pvol_para)[i].name, (pvol_para)[i].ideal_vol);
+			return res = (pvol_para)[i].ideal_vol;
+		}
+	}
+	return res;
+}
+
+static int __init_trimming(struct regulator_dev *rdev)
+{
+	struct sci_regulator_desc *desc = __get_desc(rdev);
+	const struct sci_regulator_regs *regs = desc->regs;
+	int ctl_vol, to_vol;
+
+	if (!regs->vol_trm)
+		goto exit;
+
+	to_vol = regulator_default_get(desc->desc.name);
+	if (!to_vol) {
+		to_vol = regs->vol_def;
+	}
+
+	if (to_vol && rdev->desc->ops->get_voltage) {
+		ctl_vol = rdev->desc->ops->get_voltage(rdev);
+		rdev->constraints->uV_offset = ctl_vol - to_vol * 1000;//uV
+		debug("regu %p (%s), uV offset %d\n", regs, desc->desc.name, rdev->constraints->uV_offset);
+	}
+exit:
+	return 0;
+}
+
+static int __match_dcdc_vol(const struct sci_regulator_regs *regs, u32 vol)
+{
+	int i, j = -1;
+	int ds, min_ds = 100;	/* mV, the max range of small voltage */
+	for (i = 0; i < regs->vol_sel_cnt; i++) {
+		ds = vol - regs->vol_sel[i];
+		if (ds >= 0 && ds < min_ds) {
+			min_ds = ds;
+			j = i;
+		}
+	}
+	return j;
+}
+
+static int dcdc_get_trimming_step(struct regulator_dev *rdev, int to_vol)
+{
+	struct sci_regulator_desc *desc = __get_desc(rdev);
+
+	/* FIXME: vddmem step 200/32mV */
+	return (0 == strcmp(desc->desc.name, "vddmem") ) ? (1000 * 200 / 32) : (1000 * 100 / 32) /*uV */;
+}
+
+static int __dcdc_enable_time(struct regulator_dev *rdev, int old_vol)
+{
+	int vol = rdev->desc->ops->get_voltage(rdev) / 1000;
+	if (vol > old_vol) {
+		/* FIXME: for dcdc, each step (50mV) takes 10us */
+		int dly = (vol - old_vol) * 10 / 50;
+		WARN_ON(dly > 1000);
+		udelay(dly);
+	}
+	return 0;
+}
+
+static int dcdc_set_voltage(struct regulator_dev *rdev, int min_uV,
+			    int max_uV, unsigned *selector)
+{
+	struct sci_regulator_desc *desc = __get_desc(rdev);
+	const struct sci_regulator_regs *regs = desc->regs;
+	int i, mv = min_uV / 1000;
+	int old_vol = rdev->desc->ops->get_voltage(rdev) / 1000;
+
+	debug0("regu %p (%s) %d %d\n", regs, desc->desc.name, min_uV, max_uV);
+
+	BUG_ON(0 != __ffs(regs->vol_trm_bits));
+	BUG_ON(regs->vol_sel_cnt > 8);
+
+	if (!regs->vol_ctl)
+		return -EACCES;
+
+	/* found the closely vol ctrl bits */
+	i = __match_dcdc_vol(regs, mv);
+	if (i < 0)
+		return WARN(-EINVAL,
+			    "not found %s closely ctrl bits for %dmV\n",
+			    desc->desc.name, mv);
+
+	debug2("regu %p (%s) %d = %d %+dmv\n", regs, desc->desc.name,
+	       mv, regs->vol_sel[i], mv - regs->vol_sel[i]);
+
+#if !defined(CONFIG_REGULATOR_CAL_DUMMY)
+	/* dcdc calibration control bits (default 00000),
+	 * small adjust voltage: 100/32mv ~= 3.125mv
+	 */
+	{
+		int shft = __ffs(regs->vol_ctl_bits);
+		int j = (int)(mv - regs->vol_sel[i]) * 1000 / dcdc_get_trimming_step(rdev, 0);
+
+		if (0 == strcmp(desc->desc.name, "vddmem") )
+			j += 0x10;
+
+		BUG_ON(j > (regs->vol_trm_bits >> __ffs(regs->vol_trm_bits)));
+
+		if (regs->vol_trm == regs->vol_ctl) {	/* new feature */
+			ANA_REG_SET(regs->vol_ctl, j | (i << shft),
+				    regs->vol_trm_bits | regs->vol_ctl_bits);
+		} else {
+			BUG_ON(1);
+		}
+	}
+
+	__dcdc_enable_time(rdev, old_vol);
+#endif
+
+	return 0;
+}
+
+/** CONFIG_ARCH_SCX35
+	bonding option 5
+	bonding option 4	dcdc_wrf_ctl[2]
+	bonding option 3
+	bonding option 2	dcdc_mem_ctl[2]
+	bonding option 1	dcdc_mem_ctl[1]
+	bonding option 0
+ */
+static int dcdc_get_voltage(struct regulator_dev *rdev)
+{
+	struct sci_regulator_desc *desc =
+	    (struct sci_regulator_desc *)rdev->desc;
+	const struct sci_regulator_regs *regs = desc->regs;
+	u32 mv;
+	int cal = 0;		/* uV */
+	int i, shft = __ffs(regs->vol_ctl_bits);
+
+	debug0("regu %p (%s), vol ctl %08x, shft %d, mask %08x, sel %d\n",
+	       regs, desc->desc.name, regs->vol_ctl,
+	       shft, regs->vol_ctl_bits, regs->vol_sel_cnt);
+
+	if (!regs->vol_ctl)
+		return -EINVAL;
+
+	BUG_ON(0 != __ffs(regs->vol_trm_bits));
+	BUG_ON(regs->vol_sel_cnt > 8);
+
+	i = (ANA_REG_GET(regs->vol_ctl) & regs->vol_ctl_bits) >> shft;
+
+	mv = regs->vol_sel[i];
+
+	if (regs->vol_trm) {
+		/*check the reset relative bit of vol ctl */
+		if (regs->vol_trm != regs->vol_ctl) {
+			u32 vol_bits =
+			    (~ANA_REG_GET(regs->vol_ctl) &
+			     (regs->vol_ctl_bits << 4)) >> 4;
+
+			if (i != vol_bits) {
+				return -EFAULT;
+			}
+		}
+
+		cal = (ANA_REG_GET(regs->vol_trm) & regs->vol_trm_bits);
+		if (0 == strcmp(desc->desc.name, "vddmem") )
+			cal -= 0x10;
+
+		cal *= dcdc_get_trimming_step(rdev, 0);	/*uV */
+	}
+
+	debug2("regu %p (%s) %d +%dmv\n", regs, desc->desc.name, mv, cal / 1000);
+
+	return (mv * 1000 + cal) /*uV */;
+}
+
+/* standard boost ops*/
+#define MAX_CURRENT_SINK	(500)	/*FIXME: max current sink */
+static int boost_set_current_limit(struct regulator_dev *rdev, int min_uA,
+				   int max_uA)
+{
+	struct sci_regulator_desc *desc = __get_desc(rdev);
+	const struct sci_regulator_regs *regs = desc->regs;
+	int ma = min_uA / 1000;
+	int ret = -EACCES;
+	int i, shft = __ffs(regs->vol_ctl_bits);
+	int trim = (int)regs->vol_def / 1000;
+	int steps = (regs->vol_ctl_bits >> shft) + 1;
+
+	debug("regu %p (%s) %d %d\n", regs, desc->desc.name, min_uA, max_uA);
+
+	if (!regs->vol_ctl)
+		goto exit;
+
+	if (trim > 0) {
+		trim <<= __ffs(regs->vol_trm_bits);
+	}
+
+	i = ma * steps / MAX_CURRENT_SINK;
+	if (i >= 0 && i < steps) {
+		ANA_REG_SET(regs->vol_ctl, (i << shft) | trim,
+			    regs->vol_ctl_bits | regs->vol_trm_bits);
+
+		ret = 0;
+	}
+
+	WARN(0 != ret,
+	     "warning: regulator (%s) not support %dmA\n", desc->desc.name, ma);
+
+exit:
+	return ret;
+}
+
+static int boost_get_current_limit(struct regulator_dev *rdev)
+{
+	struct sci_regulator_desc *desc = __get_desc(rdev);
+	const struct sci_regulator_regs *regs = desc->regs;
+	u32 cur;
+	int i, shft = __ffs(regs->vol_ctl_bits);
+	int steps = (regs->vol_ctl_bits >> shft) + 1;
+
+	debug0("regu %p (%s), vol ctl %08x, shft %d, mask %08x\n",
+	       regs, desc->desc.name, regs->vol_ctl, shft, regs->vol_ctl_bits);
+
+	if (!regs->vol_ctl)
+		return -EACCES;
+
+	i = ((ANA_REG_GET(regs->vol_ctl) & regs->vol_ctl_bits) >> shft);
+	cur = i * MAX_CURRENT_SINK / steps;
+	debug2("regu %p (%s), current %d\n", regs, desc->desc.name, cur);
+	return cur * 1000;
+}
+
+static int adc_sample_bit = 1;	/*12bits mode */
+static short adc_data[3][2]
+#if defined(CONFIG_REGULATOR_ADC_DEBUG)
+    = {
+	{4200, 3320},		/* same as nv adc_t */
+	{3600, 2844},
+	{400, 316},		/* 0.4@VBAT, Reserved IdealC Value */
+}
+#endif
+;
+
+static int __is_valid_adc_cal(void)
+{
+	return 0 != adc_data[0][0];
+}
+
+static int __init __adc_cal_setup(char *str)
+{
+	u32 *p = (u32 *) adc_data;
+	*p = simple_strtoul(str, &str, 0);
+	if (*p++ && *++str) {
+		*p = simple_strtoul(str, &str, 0);
+		if (*p) {
+			debug("%d : %d -- %d : %d\n",
+			      (int)adc_data[0][0], (int)adc_data[0][1],
+			      (int)adc_data[1][0], (int)adc_data[1][1]);
+			if (adc_data[0][1] < BIT(10)
+			    && adc_data[1][1] < BIT(10))
+				adc_sample_bit = 0;	/*10bits mode */
+		}
+	}
+	return 0;
+}
+early_param("adc_cal", __adc_cal_setup);
+
+static int __init __adc_cal_fuse_setup(void)
+{
+	if (!__is_valid_adc_cal() &&
+	    sci_efuse_calibration_get((u32 *) adc_data)) {
+		debug("%d : %d -- %d : %d\n",
+		      (int)adc_data[0][0], (int)adc_data[0][1],
+		      (int)adc_data[1][0], (int)adc_data[1][1]);
+	}
+
+	return 0;
+}
+
+static int __adc2vbat(int adc_res)
+{
+	int t = adc_data[0][0] - adc_data[1][0];
+	t *= (adc_res - adc_data[0][1]);
+	t /= (adc_data[0][1] - adc_data[1][1]);
+	t += adc_data[0][0];
+	return t;
+}
+
+#define MEASURE_TIMES	(15)
+
+static void __dump_adc_result(u32 adc_val[])
+{
+#if defined(CONFIG_REGULATOR_ADC_DEBUG)
+	int i;
+	for (i = 0; i < MEASURE_TIMES; i++) {
+		printk("%d ", adc_val[i]);
+	}
+	printk("\n");
+#endif
+}
+
+static int cmp_val(const void *a, const void *b)
+{
+	return *(int *)a - *(int *)b;
+}
+
+/**
+ * __adc_voltage - get regulator output voltage through auxadc
+ * @regulator: regulator source
+ *
+ * This returns the current regulator voltage in mV.
+ *
+ * NOTE: If the regulator is disabled it will return the voltage value. This
+ * function should not be used to determine regulator state.
+ */
+static int regu_adc_voltage(struct regulator_dev *rdev)
+{
+	struct sci_regulator_desc *desc = __get_desc(rdev);
+	const struct sci_regulator_regs *regs = desc->regs;
+
+	int ret, adc_chan = regs->cal_ctl_bits >> 16;
+	u16 ldo_cal_sel = regs->cal_ctl_bits & 0xFFFF;
+	u32 adc_res, adc_val[MEASURE_TIMES];
+	u32 chan_numerators = 1, chan_denominators = 1;
+	u32 bat_numerators, bat_denominators;
+
+	struct adc_sample_data data = {
+		.channel_id = adc_chan,
+		.channel_type = 0,	/*sw */
+		.hw_channel_delay = 0,	/*reserved */
+		.scale = 1,	/*big scale */
+		.pbuf = &adc_val[0],
+		.sample_num = MEASURE_TIMES,
+		.sample_bits = adc_sample_bit,
+		.sample_speed = 0,	/*quick mode */
+		.signal_mode = 0,	/*resistance path */
+	};
+
+	if (!__is_valid_adc_cal())
+		return -EACCES;
+
+	if (!regs->cal_ctl)
+		return -EINVAL;
+
+	/* enable ldo cal before adc sampling and ldo calibration */
+	if (0 == regs->typ) {
+		mutex_lock(&adc_chan_mutex);
+		ANA_REG_OR(regs->cal_ctl, ldo_cal_sel);
+		debug0("%s adc channel %d : %04x\n",
+		       desc->desc.name, data.channel_id, ldo_cal_sel);
+	}
+
+	ret = sci_adc_get_values(&data);
+	BUG_ON(0 != ret);
+
+	/* close ldo cal and release multiplexed aux adc channel */
+	if (0 == regs->typ) {
+		ANA_REG_BIC(regs->cal_ctl, ldo_cal_sel);
+		mutex_unlock(&adc_chan_mutex);
+	}
+
+	__dump_adc_result(adc_val);
+	sort(adc_val, MEASURE_TIMES, sizeof(u32), cmp_val, 0);
+	/*__dump_adc_result(adc_val);*/
+
+	sci_adc_get_vol_ratio(data.channel_id, data.scale,
+			      &chan_numerators, &chan_denominators);
+
+	sci_adc_get_vol_ratio(ADC_CHANNEL_VBAT, 0, &bat_numerators,
+			      &bat_denominators);
+
+	adc_res = adc_val[MEASURE_TIMES / 2];
+	debug("%s adc channel %d : 0x%04x, ratio (%d/%d), result value %d\n",
+	      desc->desc.name, data.channel_id, ldo_cal_sel,
+	      chan_numerators, chan_denominators, adc_res);
+
+	if (adc_res == 0)
+		return -EAGAIN;
+	else
+		return __adc2vbat(adc_res)
+		    * (bat_numerators * chan_denominators)
+		    / (bat_denominators * chan_numerators);
+}
+
+/**
+ * regulator_strongly_disable - strongly disable regulator output
+ * @regulator: regulator source
+ *
+ * Strongly try disable the regulator output voltage or current.
+ * NOTE: this *will* disable the regulator output even if other consumer
+ * devices have it enabled. This should be used for situations when device
+ * had unbalanced with calls to regulator_enable().
+ * *Not* recommended to call this function before try to balance the use_count.
+ */
+int regulator_strongly_disable(struct regulator *regulator)
+{
+	struct regulator_dev *rdev = regulator_get_drvdata(regulator);
+	int ret = 0;
+
+	if (rdev)
+		while (rdev->use_count--)
+			regulator_disable(regulator);
+
+	return ret;
+}
+
+EXPORT_SYMBOL_GPL(regulator_strongly_disable);
+
+static struct regulator_ops ldo_ops = {
+	.enable = ldo_turn_on,
+	.disable = ldo_turn_off,
+	.is_enabled = ldo_is_on,
+	.set_voltage = ldo_set_voltage,
+	.get_voltage = ldo_get_voltage,
+	.set_mode = ldo_set_mode,
+/*	.enable_time = ldo_enable_time, */
+};
+
+static struct regulator_ops dcdc_ops = {
+	.enable = ldo_turn_on,
+	.disable = ldo_turn_off,
+	.is_enabled = ldo_is_on,
+	.set_voltage = dcdc_set_voltage,
+	.get_voltage = dcdc_get_voltage,
+};
+
+static struct regulator_ops boost_ops = {
+	.enable = ldo_turn_on,
+	.disable = ldo_turn_off,
+	.is_enabled = ldo_is_on,
+	.set_current_limit = boost_set_current_limit,
+	.get_current_limit = boost_get_current_limit,
+	.set_mode = ldo_set_mode,
+};
+
+/*
+ * Consider the following machine :-
+ *
+ *   Regulator-1 -+-> [Consumer A @ 1.8V]
+ *                |
+ *                +-> [Consumer B @ 1.8V]
+ *
+ *   Regulator-2 ---> [Consumer C @ 3.3V]
+ *
+ * The drivers for consumers A & B must be mapped to the correct regulator in
+ * order to control their power supply. This mapping can be achieved in board/machine
+ * initialisation code by creating a struct regulator_consumer_supply for each regulator.
+ * Alternatively, we built a regulator supply-consumers map, the format is as follow:
+ *
+ *      supply source-1, consumer A, consumer B, ..., NULL
+ *      supply source-2, consumer C, ..., NULL
+ *      ...
+ *      NULL
+ *
+ */
+static struct regulator_consumer_supply *set_supply_map(struct device *dev,
+							const char *supply_name,
+							int *num)
+{
+	char **map = (char **)dev_get_platdata(dev);
+	int i, n;
+	struct regulator_consumer_supply *consumer_supplies = NULL;
+
+	if (!supply_name || !(map && map[0]))
+		return NULL;
+
+	for (i = 0; map[i] || map[i + 1]; i++) {
+		if (map[i] && 0 == strcmp(map[i], supply_name))
+			break;
+	}
+
+	/* i++; *//* Do not skip supply name */
+
+	for (n = 0; map[i + n]; n++) ;
+
+	if (n) {
+		debug0("supply %s consumers %d - %d\n", supply_name, i, n);
+		consumer_supplies =
+		    kzalloc(n * sizeof(*consumer_supplies), GFP_KERNEL);
+		BUG_ON(!consumer_supplies);
+		for (n = 0; map[i]; i++, n++) {
+			consumer_supplies[n].supply = map[i];
+		}
+		if (num)
+			*num = n;
+	}
+	return consumer_supplies;
+}
+
+#if defined(CONFIG_DEBUG_FS)
+static struct dentry *debugfs_root = NULL;
+
+static u32 ana_addr = 0;
+static int debugfs_ana_addr_get(void *data, u64 * val)
+{
+	if (ana_addr < PAGE_SIZE) {
+		*val = ANA_REG_GET(ana_addr + (ANA_REGS_GLB_BASE & PAGE_MASK));
+	} else {
+		void *addr = ioremap(ana_addr, PAGE_SIZE);
+		*val = __raw_readl(addr);
+		iounmap(addr);
+	}
+	return 0;
+}
+
+static int debugfs_ana_addr_set(void *data, u64 val)
+{
+	if (ana_addr < PAGE_SIZE) {
+		ANA_REG_SET(ana_addr + (ANA_REGS_GLB_BASE & PAGE_MASK), val,
+			    -1);
+	} else {
+		void *addr = ioremap(ana_addr, PAGE_SIZE);
+		__raw_writel(val, addr);
+		iounmap(addr);
+	}
+	return 0;
+}
+
+static int adc_chan = 5 /*VBAT*/;
+static int debugfs_adc_chan_get(void *pdata, u64 * val)
+{
+	int i, ret;
+	u32 adc_res, adc_val[MEASURE_TIMES];
+	struct adc_sample_data data = {
+		.channel_id = adc_chan,
+		.channel_type = 0,	/*sw */
+		.hw_channel_delay = 0,	/*reserved */
+		.scale = 1,	/*big scale */
+		.pbuf = &adc_val[0],
+		.sample_num = MEASURE_TIMES,
+		.sample_bits = adc_sample_bit,
+		.sample_speed = 0,	/*quick mode */
+		.signal_mode = 0,	/*resistance path */
+	};
+
+	ret = sci_adc_get_values(&data);
+	BUG_ON(0 != ret);
+
+	for (i = 0; i < MEASURE_TIMES; i++) {
+		printk("%d ", adc_val[i]);
+	}
+	printk("\n");
+
+	sort(adc_val, MEASURE_TIMES, sizeof(u32), cmp_val, 0);
+	adc_res = adc_val[MEASURE_TIMES / 2];
+	pr_info("adc chan %d, result value %d, vbat %d\n",
+		data.channel_id, adc_res, __adc2vbat(adc_res));
+	*val = adc_res;
+	return 0;
+}
+
+static int debugfs_adc_chan_set(void *data, u64 val)
+{
+	adc_chan = val;
+	return 0;
+}
+
+static int debugfs_enable_get(void *data, u64 * val)
+{
+	struct regulator_dev *rdev = data;
+	if (rdev && rdev->desc->ops->is_enabled)
+		*val = rdev->desc->ops->is_enabled(rdev);
+	else
+		*val = -1;
+	return 0;
+}
+
+static int debugfs_enable_set(void *data, u64 val)
+{
+	struct regulator_dev *rdev = data;
+	if (rdev && rdev->desc->ops->enable)
+		(val) ? rdev->desc->ops->enable(rdev)
+		    : rdev->desc->ops->disable(rdev);
+	return 0;
+}
+
+static int debugfs_voltage_get(void *data, u64 * val)
+{
+	struct regulator_dev *rdev = data;
+	if (rdev)
+		*val = regu_adc_voltage(rdev);
+	else
+		*val = -1;
+	return 0;
+}
+
+static int debugfs_voltage_set(void *data, u64 val)
+{
+	struct regulator_dev *rdev = data;
+	if (rdev && rdev->desc->ops->set_voltage) {
+		u32 min_uV = (u32)val * 1000;
+		min_uV += rdev->constraints->uV_offset;
+		rdev->desc->ops->set_voltage(rdev, min_uV, min_uV, 0);
+	}
+	return 0;
+}
+
+static int debugfs_boost_get(void *data, u64 * val)
+{
+	struct regulator_dev *rdev = data;
+	if (rdev && rdev->desc->ops->get_current_limit)
+		*val = rdev->desc->ops->get_current_limit(rdev) / 1000;
+	else
+		*val = -1;
+	return 0;
+}
+
+static int debugfs_boost_set(void *data, u64 val)
+{
+	struct regulator_dev *rdev = data;
+	if (rdev && rdev->desc->ops->set_current_limit)
+		rdev->desc->ops->set_current_limit(rdev, val * 1000,
+						   val * 1000);
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(fops_ana_addr,
+			debugfs_ana_addr_get, debugfs_ana_addr_set, "%llu\n");
+DEFINE_SIMPLE_ATTRIBUTE(fops_adc_chan,
+			debugfs_adc_chan_get, debugfs_adc_chan_set, "%llu\n");
+DEFINE_SIMPLE_ATTRIBUTE(fops_enable,
+			debugfs_enable_get, debugfs_enable_set, "%llu\n");
+DEFINE_SIMPLE_ATTRIBUTE(fops_ldo,
+			debugfs_voltage_get, debugfs_voltage_set, "%llu\n");
+DEFINE_SIMPLE_ATTRIBUTE(fops_boost,
+			debugfs_boost_get, debugfs_boost_set, "%llu\n");
+
+static void rdev_init_debugfs(struct regulator_dev *rdev)
+{
+	struct sci_regulator_desc *desc = __get_desc(rdev);
+	desc->debugfs = debugfs_create_dir(rdev->desc->name, debugfs_root);
+	if (IS_ERR(rdev->debugfs) || !rdev->debugfs) {
+		pr_warn("Failed to create debugfs directory\n");
+		rdev->debugfs = NULL;
+		return;
+	}
+
+	debugfs_create_file("enable", S_IRUGO | S_IWUSR,
+			    desc->debugfs, rdev, &fops_enable);
+
+	if (desc->desc.type == REGULATOR_CURRENT)
+		debugfs_create_file("current", S_IRUGO | S_IWUSR,
+				    desc->debugfs, rdev, &fops_boost);
+	else
+		debugfs_create_file("voltage", S_IRUGO | S_IWUSR,
+				    desc->debugfs, rdev, &fops_ldo);
+}
+#else
+static void rdev_init_debugfs(struct regulator_dev *rdev)
+{
+}
+#endif
+
+#ifdef CONFIG_OF
+#include <linux/of.h>
+#define reg_info(format, arg...) pr_info("reg: " "@@@%s: " format, __func__, ## arg)
+#endif
+
+static inline int __strcmp(const char *cs, const char *ct)
+{
+	if (!cs || !ct) return -1;
+	return strcmp(cs, ct);
+}
+
+void *sci_regulator_register(struct platform_device *pdev,
+				       struct sci_regulator_desc *desc)
+{
+	static atomic_t idx = ATOMIC_INIT(1);	/* 0: dummy */
+	struct regulator_dev *rdev;
+	struct regulator_ops *__regs_ops[] = {
+		&ldo_ops, 0, &dcdc_ops, 0 /*lpref_ops */ , &boost_ops,
+		0,
+	};
+	struct regulator_consumer_supply consumer_supplies_default[] = {
+		[0] = {
+		       .supply = desc->desc.name,
+		       }
+	};
+#ifndef CONFIG_OF
+	struct regulator_init_data init_data = {
+		.supply_regulator = 0,
+		.constraints = {
+				.min_uV = 0,
+				.max_uV = 4200 * 1000,
+				.valid_modes_mask =
+				REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY,
+				.valid_ops_mask =
+				REGULATOR_CHANGE_STATUS |
+				REGULATOR_CHANGE_VOLTAGE |
+				REGULATOR_CHANGE_MODE,
+				},
+		.num_consumer_supplies = 1,
+		.consumer_supplies = consumer_supplies_default,
+		.regulator_init = 0,
+		.driver_data = 0,
+	};
+
+	struct regulator_config config = { };
+
+	if (sci_ana_chip_ver_is_compatible(SC2711AA)) {
+		if (0 == strcmp(desc->desc.name, "vdd18") ||
+			0 == strcmp(desc->desc.name, "vddemmcio") ||
+			0 == strcmp(desc->desc.name, "vddcamd") ||
+			0 == strcmp(desc->desc.name, "vddcamio")) {
+
+			desc->regs->vol_sel[0] = 1400;
+			debug("%s vol base %d\n", desc->desc.name, desc->regs->vol_sel[0]);
+		}
+	}
+
+#else
+	struct regulator_config config = { };
+	struct regulator_init_data *init_data;
+	struct device_node *dev_np;
+	struct device_node *node_np;
+	dev_np = pdev->dev.of_node;
+	node_np = of_get_child_by_name(dev_np, desc->desc.name);
+	init_data = of_get_regulator_init_data(&pdev->dev, node_np);
+	if(!init_data || 0 != __strcmp(init_data->constraints.name, desc->desc.name)){
+		dev_err(&pdev->dev, "out of memory or %s not found\n", desc->desc.name);
+		return NULL;
+	}
+	reg_info("[%d]%s range %d - %d\n", idx.counter, init_data->constraints.name,
+		init_data->constraints.min_uV, init_data->constraints.max_uV);
+
+	init_data->supply_regulator = 0;
+	init_data->constraints.min_uV = 0,
+	init_data->constraints.max_uV = 4200 * 1000;
+	init_data->constraints.valid_modes_mask = 
+		REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY;
+	init_data->constraints.valid_ops_mask = REGULATOR_CHANGE_MODE |
+		REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE;
+	init_data->num_consumer_supplies = 1;
+	init_data->consumer_supplies = consumer_supplies_default;
+#endif
+
+	desc->desc.id = atomic_inc_return(&idx) - 1;
+
+	if (0 == strcmp(desc->desc.name, "vddrf0")) {
+		if (ana_status_bondopt4) { /* BONDOPT4 */
+			desc->regs->vol_def = 2800;
+		} else {
+			desc->regs->vol_def = 1800;
+		}
+	}
+
+	BUG_ON(desc->regs->pd_set
+	       && desc->regs->pd_set == desc->regs->pd_rst
+	       && desc->regs->pd_set_bit == desc->regs->pd_rst_bit);
+
+	BUG_ON(desc->regs->typ >= ARRAY_SIZE(__regs_ops));
+	if (!desc->desc.ops)
+		desc->desc.ops = __regs_ops[desc->regs->typ];
+
+#ifndef CONFIG_OF
+	init_data.consumer_supplies =
+	    set_supply_map(&pdev->dev, desc->desc.name,
+			   &init_data.num_consumer_supplies);
+
+	if (!init_data.consumer_supplies)
+		init_data.consumer_supplies = consumer_supplies_default;
+
+	debug0("regu %p (%s)\n", desc->regs, desc->desc.name);
+        config.dev = &pdev->dev;
+        config.init_data = &init_data;
+        config.driver_data = NULL;
+        config.of_node = NULL;
+        rdev = regulator_register(&desc->desc, &config);
+	if (init_data.consumer_supplies != consumer_supplies_default)
+		kfree(init_data.consumer_supplies);
+#else
+	init_data->consumer_supplies =
+	    set_supply_map(&pdev->dev, desc->desc.name,
+			   &init_data->num_consumer_supplies);
+
+	if (!init_data->consumer_supplies)
+		init_data->consumer_supplies = consumer_supplies_default;
+
+	debug0("regu %p (%s)\n", desc->regs, desc->desc.name);
+        config.dev = &pdev->dev;
+        config.init_data = init_data;
+        config.driver_data = NULL;
+        config.of_node = node_np;
+        rdev = regulator_register(&desc->desc, &config);
+	if (init_data->consumer_supplies != consumer_supplies_default)
+		kfree(init_data->consumer_supplies);
+#endif
+
+	if (!IS_ERR(rdev)) {
+		rdev->reg_data = rdev;
+		desc->data.rdev = rdev;
+		__init_trimming(rdev);
+		rdev_init_debugfs(rdev);
+	}
+	return rdev;
+}
+
+/**
+ * IMPORTANT!!!
+ * spreadtrum power regulators is intergrated on the chip, include LDOs and DCDCs.
+ * so i autogen all regulators non-variable description in plat or mach directory,
+ * which named __xxxx_regulator_map.h, BUT register all in regulator driver probe func,
+ * just like other regulator vendor drivers.
+ */
+static int sci_regulator_probe(struct platform_device *pdev)
+{
+#ifdef CONFIG_DEBUG_FS
+	debugfs_root =
+		debugfs_create_dir(REGULATOR_ROOT_DIR, NULL);
+	if (IS_ERR(debugfs_root) || !debugfs_root) {
+		WARN(!debugfs_root,
+			 "%s: Failed to create debugfs directory\n", REGULATOR_ROOT_DIR);
+		debugfs_root = NULL;
+	}
+
+	/* compatible with 8810 adc test */
+	debugfs_create_u32("ana_addr", S_IRUGO | S_IWUSR,
+			   debugfs_root, (u32 *) & ana_addr);
+	debugfs_create_file("ana_valu", S_IRUGO | S_IWUSR,
+				debugfs_root, &ana_addr, &fops_ana_addr);
+	debugfs_create_file("adc_chan", S_IRUGO | S_IWUSR,
+				debugfs_root, &adc_chan, &fops_adc_chan);
+	debugfs_create_u64("adc_data", S_IRUGO | S_IWUSR,
+			   debugfs_root, (u64 *) & adc_data);
+
+	{ /* vddarm/vddcore/vddmem common debugfs interface */
+		char str[NAME_MAX];
+		struct dentry *vol_root = debugfs_create_dir("vol", NULL);
+		sprintf(str, "../%s/vddarm/voltage", REGULATOR_ROOT_DIR);
+		debugfs_create_symlink("dcdcarm", vol_root, str);
+		sprintf(str, "../%s/vddcore/voltage", REGULATOR_ROOT_DIR);
+		debugfs_create_symlink("dcdccore", vol_root, str);
+		sprintf(str, "../%s/vddmem/voltage", REGULATOR_ROOT_DIR);
+		debugfs_create_symlink("dcdcmem", vol_root, str);
+	}
+#endif
+
+	ana_chip_id = (sci_get_ana_chip_id() | sci_get_ana_chip_ver());
+	ana_status_bondopt4 = (ANA_REG_GET(ANA_REG_GLB_LDO_V_CTRL9) >> 15) & 0x1;
+
+	pr_info("sc271x ana chip id: (0x%08x), bond opt (0x%08x)\n", ana_chip_id, ana_status_bondopt4);
+
+#include CONFIG_REGULATOR_SPRD_MAP
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static struct of_device_id sprd_regulator_of_match[] = {
+	{ .compatible = "sprd,sc2711-regulator", },
+	{ }
+};
+#endif
+
+static struct platform_driver sci_regulator_driver = {
+	.driver = {
+		   .name = "sc2711-regulator",
+		   .owner = THIS_MODULE,
+		   .of_match_table = of_match_ptr(sprd_regulator_of_match),
+		   },
+	.probe = sci_regulator_probe,
+};
+
+static int __init regu_driver_init(void)
+{
+	__adc_cal_fuse_setup();
+
+	return platform_driver_register(&sci_regulator_driver);
+}
+
+int __init sci_regulator_init(void)
+{
+#ifndef CONFIG_OF
+	static struct platform_device regulator_device = {
+		.name = "sc2711-regulator",
+		.id = -1,
+	};
+
+	sci_adi_raw_write(ANA_REG_GLB_PWR_WR_PROT_VALUE,
+			  BITS_PWR_WR_PROT_VALUE(0x6e7f));
+	WARN_ON(!
+		(sci_adi_read(ANA_REG_GLB_PWR_WR_PROT_VALUE) &
+		 BIT_PWR_WR_PROT));
+	sci_adi_raw_write(ANA_REG_GLB_PWR_WR_PROT_VALUE, 0);
+
+	__adc_cal_fuse_setup();
+	return platform_device_register(&regulator_device);
+#else
+	return of_platform_populate(of_find_node_by_path("/sprd-regulators"),
+			sprd_regulator_of_match, NULL, NULL);
+#endif
+}
+
+subsys_initcall(regu_driver_init);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Spreadtrum voltage regulator driver");
+MODULE_AUTHOR("robot <zhulin.lian@spreadtrum.com>");
+MODULE_VERSION("0.2");