Initial file dump from open source releaseHEADmaster

6 files changed, 497 insertions, 0 deletions

diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
new file mode 100644
index 00000000..ee039dce
--- /dev/null
+++ b/drivers/power/reset/Kconfig
@@ -0,0 +1,40 @@
+menuconfig POWER_RESET
+	bool "Board level reset or power off"
+	help
+	  Provides a number of drivers which either reset a complete board
+	  or shut it down, by manipulating the main power supply on the board.
+
+	  Say Y here to enable board reset and power off
+
+config POWER_RESET_GPIO
+	bool "GPIO power-off driver"
+	depends on OF_GPIO && POWER_RESET
+	help
+	  This driver supports turning off your board via a GPIO line.
+	  If your board needs a GPIO high/low to power down, say Y and
+	  create a binding in your devicetree.
+
+config POWER_RESET_QNAP
+	bool "QNAP power-off driver"
+	depends on OF_GPIO && POWER_RESET && PLAT_ORION
+	help
+	  This driver supports turning off QNAP NAS devices by sending
+	  commands to the microcontroller which controls the main power.
+
+	  Say Y if you have a QNAP NAS.
+
+config POWER_RESET_RESTART
+	bool "Restart power-off driver"
+	depends on ARM
+	help
+	  Some boards don't actually have the ability to power off.
+	  Instead they restart, and u-boot holds the SoC until the
+	  user presses a key. u-boot then boots into Linux.
+
+config POWER_RESET_VEXPRESS
+	bool "ARM Versatile Express power-off and reset driver"
+	depends on ARM || ARM64
+	depends on POWER_RESET
+	help
+	  Power off and reset support for the ARM Ltd. Versatile
+	  Express boards.
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
new file mode 100644
index 00000000..372807fd
--- /dev/null
+++ b/drivers/power/reset/Makefile
@@ -0,0 +1,4 @@
+obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
+obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
+obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o
+obj-$(CONFIG_POWER_RESET_VEXPRESS) += vexpress-poweroff.o
diff --git a/drivers/power/reset/gpio-poweroff.c b/drivers/power/reset/gpio-poweroff.c
new file mode 100644
index 00000000..e290d48d
--- /dev/null
+++ b/drivers/power/reset/gpio-poweroff.c
@@ -0,0 +1,126 @@
+/*
+ * Toggles a GPIO pin to power down a device
+ *
+ * Jamie Lentin <jm@lentin.co.uk>
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * Copyright (C) 2012 Jamie Lentin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
+#include <linux/module.h>
+
+/*
+ * Hold configuration here, cannot be more than one instance of the driver
+ * since pm_power_off itself is global.
+ */
+static int gpio_num = -1;
+static int gpio_active_low;
+
+static void gpio_poweroff_do_poweroff(void)
+{
+	BUG_ON(!gpio_is_valid(gpio_num));
+
+	/* drive it active, also inactive->active edge */
+	gpio_direction_output(gpio_num, !gpio_active_low);
+	mdelay(100);
+	/* drive inactive, also active->inactive edge */
+	gpio_set_value(gpio_num, gpio_active_low);
+	mdelay(100);
+
+	/* drive it active, also inactive->active edge */
+	gpio_set_value(gpio_num, !gpio_active_low);
+
+	/* give it some time */
+	mdelay(3000);
+
+	WARN_ON(1);
+}
+
+static int gpio_poweroff_probe(struct platform_device *pdev)
+{
+	enum of_gpio_flags flags;
+	bool input = false;
+	int ret;
+
+	/* If a pm_power_off function has already been added, leave it alone */
+	if (pm_power_off != NULL) {
+		pr_err("%s: pm_power_off function already registered",
+		       __func__);
+		return -EBUSY;
+	}
+
+	gpio_num = of_get_gpio_flags(pdev->dev.of_node, 0, &flags);
+	if (!gpio_is_valid(gpio_num))
+		return gpio_num;
+
+	gpio_active_low = flags & OF_GPIO_ACTIVE_LOW;
+
+	input = of_property_read_bool(pdev->dev.of_node, "input");
+
+	ret = gpio_request(gpio_num, "poweroff-gpio");
+	if (ret) {
+		pr_err("%s: Could not get GPIO %d", __func__, gpio_num);
+		return ret;
+	}
+	if (input) {
+		if (gpio_direction_input(gpio_num)) {
+			pr_err("Could not set direction of GPIO %d to input",
+			       gpio_num);
+			goto err;
+		}
+	} else {
+		if (gpio_direction_output(gpio_num, gpio_active_low)) {
+			pr_err("Could not set direction of GPIO %d", gpio_num);
+			goto err;
+		}
+	}
+
+	pm_power_off = &gpio_poweroff_do_poweroff;
+	return 0;
+
+err:
+	gpio_free(gpio_num);
+	return -ENODEV;
+}
+
+static int gpio_poweroff_remove(struct platform_device *pdev)
+{
+	gpio_free(gpio_num);
+	if (pm_power_off == &gpio_poweroff_do_poweroff)
+		pm_power_off = NULL;
+
+	return 0;
+}
+
+static const struct of_device_id of_gpio_poweroff_match[] = {
+	{ .compatible = "gpio-poweroff", },
+	{},
+};
+
+static struct platform_driver gpio_poweroff_driver = {
+	.probe = gpio_poweroff_probe,
+	.remove = gpio_poweroff_remove,
+	.driver = {
+		.name = "poweroff-gpio",
+		.owner = THIS_MODULE,
+		.of_match_table = of_gpio_poweroff_match,
+	},
+};
+
+module_platform_driver(gpio_poweroff_driver);
+
+MODULE_AUTHOR("Jamie Lentin <jm@lentin.co.uk>");
+MODULE_DESCRIPTION("GPIO poweroff driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:poweroff-gpio");
diff --git a/drivers/power/reset/qnap-poweroff.c b/drivers/power/reset/qnap-poweroff.c
new file mode 100644
index 00000000..37f56f7e
--- /dev/null
+++ b/drivers/power/reset/qnap-poweroff.c
@@ -0,0 +1,116 @@
+/*
+ * QNAP Turbo NAS Board power off
+ *
+ * Copyright (C) 2012 Andrew Lunn <andrew@lunn.ch>
+ *
+ * Based on the code from:
+ *
+ * Copyright (C) 2009  Martin Michlmayr <tbm@cyrius.com>
+ * Copyright (C) 2008  Byron Bradley <byron.bbradley@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/serial_reg.h>
+#include <linux/kallsyms.h>
+#include <linux/of.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#define UART1_REG(x)	(base + ((UART_##x) << 2))
+
+static void __iomem *base;
+static unsigned long tclk;
+
+static void qnap_power_off(void)
+{
+	/* 19200 baud divisor */
+	const unsigned divisor = ((tclk + (8 * 19200)) / (16 * 19200));
+
+	pr_err("%s: triggering power-off...\n", __func__);
+
+	/* hijack UART1 and reset into sane state (19200,8n1) */
+	writel(0x83, UART1_REG(LCR));
+	writel(divisor & 0xff, UART1_REG(DLL));
+	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
+	writel(0x03, UART1_REG(LCR));
+	writel(0x00, UART1_REG(IER));
+	writel(0x00, UART1_REG(FCR));
+	writel(0x00, UART1_REG(MCR));
+
+	/* send the power-off command 'A' to PIC */
+	writel('A', UART1_REG(TX));
+}
+
+static int qnap_power_off_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct clk *clk;
+	char symname[KSYM_NAME_LEN];
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Missing resource");
+		return -EINVAL;
+	}
+
+	base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+	if (!base) {
+		dev_err(&pdev->dev, "Unable to map resource");
+		return -EINVAL;
+	}
+
+	/* We need to know tclk in order to calculate the UART divisor */
+	clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "Clk missing");
+		return PTR_ERR(clk);
+	}
+
+	tclk = clk_get_rate(clk);
+
+	/* Check that nothing else has already setup a handler */
+	if (pm_power_off) {
+		lookup_symbol_name((ulong)pm_power_off, symname);
+		dev_err(&pdev->dev,
+			"pm_power_off already claimed %p %s",
+			pm_power_off, symname);
+		return -EBUSY;
+	}
+	pm_power_off = qnap_power_off;
+
+	return 0;
+}
+
+static int qnap_power_off_remove(struct platform_device *pdev)
+{
+	pm_power_off = NULL;
+	return 0;
+}
+
+static const struct of_device_id qnap_power_off_of_match_table[] = {
+	{ .compatible = "qnap,power-off", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, qnap_power_off_of_match_table);
+
+static struct platform_driver qnap_power_off_driver = {
+	.probe	= qnap_power_off_probe,
+	.remove	= qnap_power_off_remove,
+	.driver	= {
+		.owner	= THIS_MODULE,
+		.name	= "qnap_power_off",
+		.of_match_table = of_match_ptr(qnap_power_off_of_match_table),
+	},
+};
+module_platform_driver(qnap_power_off_driver);
+
+MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>");
+MODULE_DESCRIPTION("QNAP Power off driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/reset/restart-poweroff.c b/drivers/power/reset/restart-poweroff.c
new file mode 100644
index 00000000..059cd150
--- /dev/null
+++ b/drivers/power/reset/restart-poweroff.c
@@ -0,0 +1,65 @@
+/*
+ * Power off by restarting and let u-boot keep hold of the machine
+ * until the user presses a button for example.
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * Copyright (C) 2012 Andrew Lunn
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/of_platform.h>
+#include <linux/module.h>
+#include <asm/system_misc.h>
+
+static void restart_poweroff_do_poweroff(void)
+{
+	arm_pm_restart('h', NULL);
+}
+
+static int restart_poweroff_probe(struct platform_device *pdev)
+{
+	/* If a pm_power_off function has already been added, leave it alone */
+	if (pm_power_off != NULL) {
+		dev_err(&pdev->dev,
+			"pm_power_off function already registered");
+		return -EBUSY;
+	}
+
+	pm_power_off = &restart_poweroff_do_poweroff;
+	return 0;
+}
+
+static int restart_poweroff_remove(struct platform_device *pdev)
+{
+	if (pm_power_off == &restart_poweroff_do_poweroff)
+		pm_power_off = NULL;
+
+	return 0;
+}
+
+static const struct of_device_id of_restart_poweroff_match[] = {
+	{ .compatible = "restart-poweroff", },
+	{},
+};
+
+static struct platform_driver restart_poweroff_driver = {
+	.probe = restart_poweroff_probe,
+	.remove = restart_poweroff_remove,
+	.driver = {
+		.name = "poweroff-restart",
+		.owner = THIS_MODULE,
+		.of_match_table = of_restart_poweroff_match,
+	},
+};
+module_platform_driver(restart_poweroff_driver);
+
+MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch");
+MODULE_DESCRIPTION("restart poweroff driver");
+MODULE_LICENSE("GPLv2");
+MODULE_ALIAS("platform:poweroff-restart");
diff --git a/drivers/power/reset/vexpress-poweroff.c b/drivers/power/reset/vexpress-poweroff.c
new file mode 100644
index 00000000..469e6962
--- /dev/null
+++ b/drivers/power/reset/vexpress-poweroff.c
@@ -0,0 +1,146 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2012 ARM Limited
+ */
+
+#include <linux/jiffies.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/stat.h>
+#include <linux/vexpress.h>
+
+#include <asm/system_misc.h>
+
+static void vexpress_reset_do(struct device *dev, const char *what)
+{
+	int err = -ENOENT;
+	struct vexpress_config_func *func =
+			vexpress_config_func_get_by_dev(dev);
+
+	if (func) {
+		unsigned long timeout;
+
+		err = vexpress_config_write(func, 0, 0);
+
+		timeout = jiffies + HZ;
+		while (time_before(jiffies, timeout))
+			cpu_relax();
+	}
+
+	dev_emerg(dev, "Unable to %s (%d)\n", what, err);
+}
+
+static struct device *vexpress_power_off_device;
+
+static void vexpress_power_off(void)
+{
+	vexpress_reset_do(vexpress_power_off_device, "power off");
+}
+
+static struct device *vexpress_restart_device;
+
+static void vexpress_restart(char str, const char *cmd)
+{
+	vexpress_reset_do(vexpress_restart_device, "restart");
+}
+
+static ssize_t vexpress_reset_active_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%d\n", vexpress_restart_device == dev);
+}
+
+static ssize_t vexpress_reset_active_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	long value;
+	int err = kstrtol(buf, 0, &value);
+
+	if (!err && value)
+		vexpress_restart_device = dev;
+
+	return err ? err : count;
+}
+
+DEVICE_ATTR(active, S_IRUGO | S_IWUSR, vexpress_reset_active_show,
+		vexpress_reset_active_store);
+
+
+enum vexpress_reset_func { FUNC_RESET, FUNC_SHUTDOWN, FUNC_REBOOT };
+
+static struct of_device_id vexpress_reset_of_match[] = {
+	{
+		.compatible = "arm,vexpress-reset",
+		.data = (void *)FUNC_RESET,
+	}, {
+		.compatible = "arm,vexpress-shutdown",
+		.data = (void *)FUNC_SHUTDOWN
+	}, {
+		.compatible = "arm,vexpress-reboot",
+		.data = (void *)FUNC_REBOOT
+	},
+	{}
+};
+
+static int vexpress_reset_probe(struct platform_device *pdev)
+{
+	enum vexpress_reset_func func;
+	const struct of_device_id *match =
+			of_match_device(vexpress_reset_of_match, &pdev->dev);
+
+	if (match)
+		func = (enum vexpress_reset_func)match->data;
+	else
+		func = pdev->id_entry->driver_data;
+
+	switch (func) {
+	case FUNC_SHUTDOWN:
+		vexpress_power_off_device = &pdev->dev;
+		pm_power_off = vexpress_power_off;
+		break;
+	case FUNC_RESET:
+		if (!vexpress_restart_device)
+			vexpress_restart_device = &pdev->dev;
+		arm_pm_restart = vexpress_restart;
+		device_create_file(&pdev->dev, &dev_attr_active);
+		break;
+	case FUNC_REBOOT:
+		vexpress_restart_device = &pdev->dev;
+		arm_pm_restart = vexpress_restart;
+		device_create_file(&pdev->dev, &dev_attr_active);
+		break;
+	};
+
+	return 0;
+}
+
+static const struct platform_device_id vexpress_reset_id_table[] = {
+	{ .name = "vexpress-reset", .driver_data = FUNC_RESET, },
+	{ .name = "vexpress-shutdown", .driver_data = FUNC_SHUTDOWN, },
+	{ .name = "vexpress-reboot", .driver_data = FUNC_REBOOT, },
+	{}
+};
+
+static struct platform_driver vexpress_reset_driver = {
+	.probe = vexpress_reset_probe,
+	.driver = {
+		.name = "vexpress-reset",
+		.of_match_table = vexpress_reset_of_match,
+	},
+	.id_table = vexpress_reset_id_table,
+};
+
+static int __init vexpress_reset_init(void)
+{
+	return platform_driver_register(&vexpress_reset_driver);
+}
+device_initcall(vexpress_reset_init);