Initial file dump from open source releaseHEADmaster

1 files changed, 347 insertions, 0 deletions

diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c
new file mode 100644
index 00000000..d63b9190
--- /dev/null
+++ b/drivers/net/can/c_can/c_can_platform.c
@@ -0,0 +1,347 @@
+/*
+ * Platform CAN bus driver for Bosch C_CAN controller
+ *
+ * Copyright (C) 2010 ST Microelectronics
+ * Bhupesh Sharma <bhupesh.sharma@st.com>
+ *
+ * Borrowed heavily from the C_CAN driver originally written by:
+ * Copyright (C) 2007
+ * - Sascha Hauer, Marc Kleine-Budde, Pengutronix <s.hauer@pengutronix.de>
+ * - Simon Kallweit, intefo AG <simon.kallweit@intefo.ch>
+ *
+ * Bosch C_CAN controller is compliant to CAN protocol version 2.0 part A and B.
+ * Bosch C_CAN user manual can be obtained from:
+ * http://www.semiconductors.bosch.de/media/en/pdf/ipmodules_1/c_can/
+ * users_manual_c_can.pdf
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/if_ether.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/consumer.h>
+
+#include <linux/can/dev.h>
+
+#include "c_can.h"
+
+#define CAN_RAMINIT_START_MASK(i)	(1 << (i))
+
+/*
+ * 16-bit c_can registers can be arranged differently in the memory
+ * architecture of different implementations. For example: 16-bit
+ * registers can be aligned to a 16-bit boundary or 32-bit boundary etc.
+ * Handle the same by providing a common read/write interface.
+ */
+static u16 c_can_plat_read_reg_aligned_to_16bit(struct c_can_priv *priv,
+						enum reg index)
+{
+	return readw(priv->base + priv->regs[index]);
+}
+
+static void c_can_plat_write_reg_aligned_to_16bit(struct c_can_priv *priv,
+						enum reg index, u16 val)
+{
+	writew(val, priv->base + priv->regs[index]);
+}
+
+static u16 c_can_plat_read_reg_aligned_to_32bit(struct c_can_priv *priv,
+						enum reg index)
+{
+	return readw(priv->base + 2 * priv->regs[index]);
+}
+
+static void c_can_plat_write_reg_aligned_to_32bit(struct c_can_priv *priv,
+						enum reg index, u16 val)
+{
+	writew(val, priv->base + 2 * priv->regs[index]);
+}
+
+static void c_can_hw_raminit(const struct c_can_priv *priv, bool enable)
+{
+	u32 val;
+
+	val = readl(priv->raminit_ctrlreg);
+	if (enable)
+		val |= CAN_RAMINIT_START_MASK(priv->instance);
+	else
+		val &= ~CAN_RAMINIT_START_MASK(priv->instance);
+	writel(val, priv->raminit_ctrlreg);
+}
+
+static struct platform_device_id c_can_id_table[] = {
+	[BOSCH_C_CAN_PLATFORM] = {
+		.name = KBUILD_MODNAME,
+		.driver_data = BOSCH_C_CAN,
+	},
+	[BOSCH_C_CAN] = {
+		.name = "c_can",
+		.driver_data = BOSCH_C_CAN,
+	},
+	[BOSCH_D_CAN] = {
+		.name = "d_can",
+		.driver_data = BOSCH_D_CAN,
+	}, {
+	}
+};
+MODULE_DEVICE_TABLE(platform, c_can_id_table);
+
+static const struct of_device_id c_can_of_table[] = {
+	{ .compatible = "bosch,c_can", .data = &c_can_id_table[BOSCH_C_CAN] },
+	{ .compatible = "bosch,d_can", .data = &c_can_id_table[BOSCH_D_CAN] },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, c_can_of_table);
+
+static int c_can_plat_probe(struct platform_device *pdev)
+{
+	int ret;
+	void __iomem *addr;
+	struct net_device *dev;
+	struct c_can_priv *priv;
+	const struct of_device_id *match;
+	const struct platform_device_id *id;
+	struct pinctrl *pinctrl;
+	struct resource *mem, *res;
+	int irq;
+	struct clk *clk;
+
+	if (pdev->dev.of_node) {
+		match = of_match_device(c_can_of_table, &pdev->dev);
+		if (!match) {
+			dev_err(&pdev->dev, "Failed to find matching dt id\n");
+			ret = -EINVAL;
+			goto exit;
+		}
+		id = match->data;
+	} else {
+		id = platform_get_device_id(pdev);
+	}
+
+	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+	if (IS_ERR(pinctrl))
+		dev_warn(&pdev->dev,
+			"failed to configure pins from driver\n");
+
+	/* get the appropriate clk */
+	clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "no clock defined\n");
+		ret = -ENODEV;
+		goto exit;
+	}
+
+	/* get the platform data */
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	irq = platform_get_irq(pdev, 0);
+	if (!mem || irq <= 0) {
+		ret = -ENODEV;
+		goto exit_free_clk;
+	}
+
+	if (!request_mem_region(mem->start, resource_size(mem),
+				KBUILD_MODNAME)) {
+		dev_err(&pdev->dev, "resource unavailable\n");
+		ret = -ENODEV;
+		goto exit_free_clk;
+	}
+
+	addr = ioremap(mem->start, resource_size(mem));
+	if (!addr) {
+		dev_err(&pdev->dev, "failed to map can port\n");
+		ret = -ENOMEM;
+		goto exit_release_mem;
+	}
+
+	/* allocate the c_can device */
+	dev = alloc_c_can_dev();
+	if (!dev) {
+		ret = -ENOMEM;
+		goto exit_iounmap;
+	}
+
+	priv = netdev_priv(dev);
+	switch (id->driver_data) {
+	case BOSCH_C_CAN:
+		priv->regs = reg_map_c_can;
+		switch (mem->flags & IORESOURCE_MEM_TYPE_MASK) {
+		case IORESOURCE_MEM_32BIT:
+			priv->read_reg = c_can_plat_read_reg_aligned_to_32bit;
+			priv->write_reg = c_can_plat_write_reg_aligned_to_32bit;
+			break;
+		case IORESOURCE_MEM_16BIT:
+		default:
+			priv->read_reg = c_can_plat_read_reg_aligned_to_16bit;
+			priv->write_reg = c_can_plat_write_reg_aligned_to_16bit;
+			break;
+		}
+		break;
+	case BOSCH_D_CAN:
+		priv->regs = reg_map_d_can;
+		priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES;
+		priv->read_reg = c_can_plat_read_reg_aligned_to_16bit;
+		priv->write_reg = c_can_plat_write_reg_aligned_to_16bit;
+
+		if (pdev->dev.of_node)
+			priv->instance = of_alias_get_id(pdev->dev.of_node, "d_can");
+		else
+			priv->instance = pdev->id;
+
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+		priv->raminit_ctrlreg =	devm_request_and_ioremap(&pdev->dev, res);
+		if (!priv->raminit_ctrlreg || priv->instance < 0)
+			dev_info(&pdev->dev, "control memory is not used for raminit\n");
+		else
+			priv->raminit = c_can_hw_raminit;
+		break;
+	default:
+		ret = -EINVAL;
+		goto exit_free_device;
+	}
+
+	dev->irq = irq;
+	priv->base = addr;
+	priv->device = &pdev->dev;
+	priv->can.clock.freq = clk_get_rate(clk);
+	priv->priv = clk;
+	priv->type = id->driver_data;
+
+	platform_set_drvdata(pdev, dev);
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	ret = register_c_can_dev(dev);
+	if (ret) {
+		dev_err(&pdev->dev, "registering %s failed (err=%d)\n",
+			KBUILD_MODNAME, ret);
+		goto exit_free_device;
+	}
+
+	dev_info(&pdev->dev, "%s device registered (regs=%p, irq=%d)\n",
+		 KBUILD_MODNAME, priv->base, dev->irq);
+	return 0;
+
+exit_free_device:
+	platform_set_drvdata(pdev, NULL);
+	free_c_can_dev(dev);
+exit_iounmap:
+	iounmap(addr);
+exit_release_mem:
+	release_mem_region(mem->start, resource_size(mem));
+exit_free_clk:
+	clk_put(clk);
+exit:
+	dev_err(&pdev->dev, "probe failed\n");
+
+	return ret;
+}
+
+static int c_can_plat_remove(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct c_can_priv *priv = netdev_priv(dev);
+	struct resource *mem;
+
+	unregister_c_can_dev(dev);
+	platform_set_drvdata(pdev, NULL);
+
+	free_c_can_dev(dev);
+	iounmap(priv->base);
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(mem->start, resource_size(mem));
+
+	clk_put(priv->priv);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int c_can_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	int ret;
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct c_can_priv *priv = netdev_priv(ndev);
+
+	if (priv->type != BOSCH_D_CAN) {
+		dev_warn(&pdev->dev, "Not supported\n");
+		return 0;
+	}
+
+	if (netif_running(ndev)) {
+		netif_stop_queue(ndev);
+		netif_device_detach(ndev);
+	}
+
+	ret = c_can_power_down(ndev);
+	if (ret) {
+		netdev_err(ndev, "failed to enter power down mode\n");
+		return ret;
+	}
+
+	priv->can.state = CAN_STATE_SLEEPING;
+
+	return 0;
+}
+
+static int c_can_resume(struct platform_device *pdev)
+{
+	int ret;
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct c_can_priv *priv = netdev_priv(ndev);
+
+	if (priv->type != BOSCH_D_CAN) {
+		dev_warn(&pdev->dev, "Not supported\n");
+		return 0;
+	}
+
+	ret = c_can_power_up(ndev);
+	if (ret) {
+		netdev_err(ndev, "Still in power down mode\n");
+		return ret;
+	}
+
+	priv->can.state = CAN_STATE_ERROR_ACTIVE;
+
+	if (netif_running(ndev)) {
+		netif_device_attach(ndev);
+		netif_start_queue(ndev);
+	}
+
+	return 0;
+}
+#else
+#define c_can_suspend NULL
+#define c_can_resume NULL
+#endif
+
+static struct platform_driver c_can_plat_driver = {
+	.driver = {
+		.name = KBUILD_MODNAME,
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(c_can_of_table),
+	},
+	.probe = c_can_plat_probe,
+	.remove = c_can_plat_remove,
+	.suspend = c_can_suspend,
+	.resume = c_can_resume,
+	.id_table = c_can_id_table,
+};
+
+module_platform_driver(c_can_plat_driver);
+
+MODULE_AUTHOR("Bhupesh Sharma <bhupesh.sharma@st.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Platform CAN bus driver for Bosch C_CAN controller");