Initial file dump from open source releaseHEADmaster

1 files changed, 161 insertions, 0 deletions

diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
new file mode 100644
index 00000000..22727792
--- /dev/null
+++ b/drivers/cpufreq/Kconfig.arm
@@ -0,0 +1,161 @@
+#
+# ARM CPU Frequency scaling drivers
+#
+
+config ARM_BIG_LITTLE_CPUFREQ
+	tristate "Generic ARM big LITTLE CPUfreq driver"
+	depends on (ARM_CPU_TOPOLOGY && BIG_LITTLE) || (ARM64 && SMP)
+	depends on PM_OPP && HAVE_CLK
+	help
+	  This enables the Generic CPUfreq driver for ARM big.LITTLE platforms.
+
+config ARM_DT_BL_CPUFREQ
+	tristate "Generic probing via DT for ARM big LITTLE CPUfreq driver"
+	depends on ARM_BIG_LITTLE_CPUFREQ && OF
+	help
+	  This enables probing via DT for Generic CPUfreq driver for ARM
+	  big.LITTLE platform. This gets frequency tables from DT.
+
+config ARM_VEXPRESS_BL_CPUFREQ
+	tristate "ARM Vexpress big LITTLE CPUfreq driver"
+	select ARM_BIG_LITTLE_CPUFREQ
+	depends on VEXPRESS_SPC
+	help
+	  This enables the CPUfreq driver for ARM Vexpress big.LITTLE platform.
+	  If in doubt, say N.
+
+config ARM_EXYNOS_CPUFREQ
+	bool "SAMSUNG EXYNOS SoCs"
+	depends on ARCH_EXYNOS
+	default y
+	help
+	  This adds the CPUFreq driver common part for Samsung
+	  EXYNOS SoCs.
+
+	  If in doubt, say N.
+
+config ARM_EXYNOS4210_CPUFREQ
+	def_bool CPU_EXYNOS4210
+	help
+	  This adds the CPUFreq driver for Samsung EXYNOS4210
+	  SoC (S5PV310 or S5PC210).
+
+config ARM_EXYNOS4X12_CPUFREQ
+	def_bool (SOC_EXYNOS4212 || SOC_EXYNOS4412)
+	help
+	  This adds the CPUFreq driver for Samsung EXYNOS4X12
+	  SoC (EXYNOS4212 or EXYNOS4412).
+
+config ARM_EXYNOS5250_CPUFREQ
+	def_bool SOC_EXYNOS5250
+	help
+	  This adds the CPUFreq driver for Samsung EXYNOS5250
+	  SoC.
+
+config ARM_EXYNOS5440_CPUFREQ
+	def_bool SOC_EXYNOS5440
+	depends on HAVE_CLK && PM_OPP && OF
+	help
+	  This adds the CPUFreq driver for Samsung EXYNOS5440
+	  SoC. The nature of exynos5440 clock controller is
+	  different than previous exynos controllers so not using
+	  the common exynos framework.
+
+config ARM_HIGHBANK_CPUFREQ
+	tristate "Calxeda Highbank-based"
+	depends on ARCH_HIGHBANK
+	select CPU_FREQ_TABLE
+	select GENERIC_CPUFREQ_CPU0
+	select PM_OPP
+	select REGULATOR
+
+	default m
+	help
+	  This adds the CPUFreq driver for Calxeda Highbank SoC
+	  based boards.
+
+	  If in doubt, say N.
+
+config ARM_IMX6Q_CPUFREQ
+	tristate "Freescale i.MX6Q cpufreq support"
+	depends on SOC_IMX6Q
+	depends on REGULATOR_ANATOP
+	help
+	  This adds cpufreq driver support for Freescale i.MX6Q SOC.
+
+	  If in doubt, say N.
+
+config ARM_INTEGRATOR
+	tristate "CPUfreq driver for ARM Integrator CPUs"
+	depends on ARCH_INTEGRATOR
+	default y
+	help
+	  This enables the CPUfreq driver for ARM Integrator CPUs.
+	  If in doubt, say Y.
+
+config ARM_KIRKWOOD_CPUFREQ
+	def_bool ARCH_KIRKWOOD && OF
+	help
+	  This adds the CPUFreq driver for Marvell Kirkwood
+	  SoCs.
+
+config ARM_OMAP2PLUS_CPUFREQ
+	bool "TI OMAP2+"
+	depends on ARCH_OMAP2PLUS
+	default ARCH_OMAP2PLUS
+	select CPU_FREQ_TABLE
+
+config ARM_S3C2416_CPUFREQ
+	bool "S3C2416 CPU Frequency scaling support"
+	depends on CPU_S3C2416
+	help
+	  This adds the CPUFreq driver for the Samsung S3C2416 and
+	  S3C2450 SoC. The S3C2416 supports changing the rate of the
+	  armdiv clock source and also entering a so called dynamic
+	  voltage scaling mode in which it is possible to reduce the
+	  core voltage of the cpu.
+
+	  If in doubt, say N.
+
+config ARM_S3C2416_CPUFREQ_VCORESCALE
+	bool "Allow voltage scaling for S3C2416 arm core"
+	depends on ARM_S3C2416_CPUFREQ && REGULATOR
+	help
+	  Enable CPU voltage scaling when entering the dvs mode.
+	  It uses information gathered through existing hardware and
+	  tests but not documented in any datasheet.
+
+	  If in doubt, say N.
+
+config ARM_S3C64XX_CPUFREQ
+	bool "Samsung S3C64XX"
+	depends on CPU_S3C6410
+	default y
+	help
+	  This adds the CPUFreq driver for Samsung S3C6410 SoC.
+
+	  If in doubt, say N.
+
+config ARM_S5PV210_CPUFREQ
+	bool "Samsung S5PV210 and S5PC110"
+	depends on CPU_S5PV210
+	select CPU_FREQ_TABLE
+	default y
+	help
+	  This adds the CPUFreq driver for Samsung S5PV210 and
+	  S5PC110 SoCs.
+
+	  If in doubt, say N.
+
+config ARM_SA1100_CPUFREQ
+	bool
+
+config ARM_SA1110_CPUFREQ
+	bool
+
+config ARM_SPEAR_CPUFREQ
+	bool "SPEAr CPUFreq support"
+	depends on PLAT_SPEAR
+	default y
+	help
+	  This adds the CPUFreq driver support for SPEAr SOCs.