Initial file dump from open source releaseHEADmaster

1 files changed, 379 insertions, 0 deletions

diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
new file mode 100644
index 00000000..4a0d69b2
--- /dev/null
+++ b/drivers/cpufreq/Kconfig
@@ -0,0 +1,379 @@
+menu "CPU Frequency scaling"
+
+config CPU_FREQ
+	bool "CPU Frequency scaling"
+	help
+	  CPU Frequency scaling allows you to change the clock speed of 
+	  CPUs on the fly. This is a nice method to save power, because 
+	  the lower the CPU clock speed, the less power the CPU consumes.
+
+	  Note that this driver doesn't automatically change the CPU
+	  clock speed, you need to either enable a dynamic cpufreq governor
+	  (see below) after boot, or use a userspace tool.
+
+	  For details, take a look at <file:Documentation/cpu-freq>.
+
+	  If in doubt, say N.
+
+if CPU_FREQ
+
+config CPU_FREQ_TABLE
+	tristate
+
+config CPU_FREQ_GOV_COMMON
+	bool
+
+config CPU_FREQ_STAT
+	tristate "CPU frequency translation statistics"
+	select CPU_FREQ_TABLE
+	default y
+	help
+	  This driver exports CPU frequency statistics information through sysfs
+	  file system.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cpufreq_stats.
+
+	  If in doubt, say N.
+
+config CPU_FREQ_STAT_DETAILS
+	bool "CPU frequency translation statistics details"
+	depends on CPU_FREQ_STAT
+	help
+	  This will show detail CPU frequency translation table in sysfs file
+	  system.
+
+	  If in doubt, say N.
+
+choice
+	prompt "Default CPUFreq governor"
+	default CPU_FREQ_DEFAULT_GOV_USERSPACE if ARM_SA1100_CPUFREQ || ARM_SA1110_CPUFREQ
+	default CPU_FREQ_DEFAULT_GOV_PERFORMANCE
+	help
+	  This option sets which CPUFreq governor shall be loaded at
+	  startup. If in doubt, select 'performance'.
+
+config CPU_FREQ_DEFAULT_GOV_PERFORMANCE
+	bool "performance"
+	select CPU_FREQ_GOV_PERFORMANCE
+	help
+	  Use the CPUFreq governor 'performance' as default. This sets
+	  the frequency statically to the highest frequency supported by
+	  the CPU.
+
+config CPU_FREQ_DEFAULT_GOV_POWERSAVE
+	bool "powersave"
+	depends on EXPERT
+	select CPU_FREQ_GOV_POWERSAVE
+	help
+	  Use the CPUFreq governor 'powersave' as default. This sets
+	  the frequency statically to the lowest frequency supported by
+	  the CPU.
+
+config CPU_FREQ_DEFAULT_GOV_USERSPACE
+	bool "userspace"
+	select CPU_FREQ_GOV_USERSPACE
+	help
+	  Use the CPUFreq governor 'userspace' as default. This allows
+	  you to set the CPU frequency manually or when a userspace 
+	  program shall be able to set the CPU dynamically without having
+	  to enable the userspace governor manually.
+
+config CPU_FREQ_DEFAULT_GOV_ONDEMAND
+	bool "ondemand"
+	select CPU_FREQ_GOV_ONDEMAND
+	select CPU_FREQ_GOV_PERFORMANCE
+	help
+	  Use the CPUFreq governor 'ondemand' as default. This allows
+	  you to get a full dynamic frequency capable system by simply
+	  loading your cpufreq low-level hardware driver.
+	  Be aware that not all cpufreq drivers support the ondemand
+	  governor. If unsure have a look at the help section of the
+	  driver. Fallback governor will be the performance governor.
+
+config CPU_FREQ_DEFAULT_GOV_CONSERVATIVE
+	bool "conservative"
+	select CPU_FREQ_GOV_CONSERVATIVE
+	select CPU_FREQ_GOV_PERFORMANCE
+	help
+	  Use the CPUFreq governor 'conservative' as default. This allows
+	  you to get a full dynamic frequency capable system by simply
+	  loading your cpufreq low-level hardware driver.
+	  Be aware that not all cpufreq drivers support the conservative
+	  governor. If unsure have a look at the help section of the
+	  driver. Fallback governor will be the performance governor.
+
+config CPU_FREQ_DEFAULT_GOV_INTERACTIVE
+	bool "interactive"
+	select CPU_FREQ_GOV_INTERACTIVE
+	help
+	  Use the CPUFreq governor 'interactive' as default. This allows
+	  you to get a full dynamic cpu frequency capable system by simply
+	  loading your cpufreq low-level hardware driver, using the
+	  'interactive' governor for latency-sensitive workloads.
+
+config CPU_FREQ_DEFAULT_GOV_SPRDEMAND
+	bool "sprdemand"
+	select CPU_FREQ_GOV_SPRDEMAND
+	select CPU_FREQ_GOV_PERFORMANCE
+	help
+	  Use the CPUFreq governor 'sprdemand' as default. This allows
+	  you to get a full dynamic frequency capable system by simply
+	  loading your cpufreq low-level hardware driver.
+	  Be aware that not all cpufreq drivers support the ondemand
+	  governor. If unsure have a look at the help section of the
+	  driver. Fallback governor will be the performance governor.
+
+
+endchoice
+
+config CPU_FREQ_GOV_PERFORMANCE
+	tristate "'performance' governor"
+	help
+	  This cpufreq governor sets the frequency statically to the
+	  highest available CPU frequency.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cpufreq_performance.
+
+	  If in doubt, say Y.
+
+config CPU_FREQ_GOV_POWERSAVE
+	tristate "'powersave' governor"
+	help
+	  This cpufreq governor sets the frequency statically to the
+	  lowest available CPU frequency.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cpufreq_powersave.
+
+	  If in doubt, say Y.
+
+config CPU_FREQ_GOV_USERSPACE
+	tristate "'userspace' governor for userspace frequency scaling"
+	help
+	  Enable this cpufreq governor when you either want to set the
+	  CPU frequency manually or when a userspace program shall
+	  be able to set the CPU dynamically, like on LART 
+	  <http://www.lartmaker.nl/>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cpufreq_userspace.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say Y.
+
+config CPU_FREQ_GOV_ONDEMAND
+	tristate "'ondemand' cpufreq policy governor"
+	select CPU_FREQ_TABLE
+	select CPU_FREQ_GOV_COMMON
+	help
+	  'ondemand' - This driver adds a dynamic cpufreq policy governor.
+	  The governor does a periodic polling and 
+	  changes frequency based on the CPU utilization.
+	  The support for this governor depends on CPU capability to
+	  do fast frequency switching (i.e, very low latency frequency
+	  transitions). 
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cpufreq_ondemand.
+
+	  For details, take a look at linux/Documentation/cpu-freq.
+
+	  If in doubt, say N.
+
+config CPU_FREQ_GOV_INTERACTIVE
+	tristate "'interactive' cpufreq policy governor"
+	default n
+	help
+	  'interactive' - This driver adds a dynamic cpufreq policy governor
+	  designed for latency-sensitive workloads.
+
+	  This governor attempts to reduce the latency of clock
+	  increases so that the system is more responsive to
+	  interactive workloads.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cpufreq_interactive.
+
+	  For details, take a look at linux/Documentation/cpu-freq.
+
+	  If in doubt, say N.
+
+config CPU_FREQ_GOV_CONSERVATIVE
+	tristate "'conservative' cpufreq governor"
+	depends on CPU_FREQ
+	select CPU_FREQ_GOV_COMMON
+	help
+	  'conservative' - this driver is rather similar to the 'ondemand'
+	  governor both in its source code and its purpose, the difference is
+	  its optimisation for better suitability in a battery powered
+	  environment.  The frequency is gracefully increased and decreased
+	  rather than jumping to 100% when speed is required.
+
+	  If you have a desktop machine then you should really be considering
+	  the 'ondemand' governor instead, however if you are using a laptop,
+	  PDA or even an AMD64 based computer (due to the unacceptable
+	  step-by-step latency issues between the minimum and maximum frequency
+	  transitions in the CPU) you will probably want to use this governor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cpufreq_conservative.
+
+	  For details, take a look at linux/Documentation/cpu-freq.
+
+	  If in doubt, say N.
+
+config CPU_FREQ_GOV_SPRDEMAND
+	tristate "'sprdemand' cpufreq policy governor"
+	select CPU_FREQ_TABLE
+	select CPU_FREQ_GOV_COMMON
+	help
+	  'sprdemand' - this driver mimics the frequency scaling behavior
+	  in 'ondemand', but with some key differences. 'sprdemand' will
+	  offline auxillary CPUs when the system is idle, and online those
+	  CPUs once the system becomes busy again. This last feature is needed for
+	  architectures which transition to low power states when only
+	  the "master" CPU is online, or for thermally constrained
+	  devices.
+
+	  If you don't have one of these architectures or devices, use
+	  'ondemand' instead.
+
+config DVFS_ONLY
+	bool "USE DVFS ONLY WHEN SPRDEMAND IS ON DUTY"
+	default n
+	help
+	  USE DVFS ONLY WHEN SPRDEMAND IS ON DUTY
+
+config SPRD_CPUFREQ_DT_DRIVER
+	bool "USE CPUFREQ DT DRIVER ON bL SOC"
+	default n
+	help
+	  USE CPUFREQ DT DRIVER INSTEAD of cpufreq-scx35.c on bL SOC
+
+config GENERIC_CPUFREQ_CPU0
+	tristate "Generic CPU0 cpufreq driver"
+	depends on HAVE_CLK && REGULATOR && PM_OPP && OF
+	select CPU_FREQ_TABLE
+	help
+	  This adds a generic cpufreq driver for CPU0 frequency management.
+	  It supports both uniprocessor (UP) and symmetric multiprocessor (SMP)
+	  systems which share clock and voltage across all CPUs.
+
+	  If in doubt, say N.
+
+config SCX35_1300MHZ
+        bool "SCX35 1300MHZ"
+        depends on ARCH_SCX35
+        default n
+        help
+          enable the 1300MHZ
+
+menu "x86 CPU frequency scaling drivers"
+depends on X86
+source "drivers/cpufreq/Kconfig.x86"
+endmenu
+
+menu "ARM CPU frequency scaling drivers"
+depends on ARM || ARM64
+source "drivers/cpufreq/Kconfig.arm"
+endmenu
+
+menu "AVR32 CPU frequency scaling drivers"
+depends on AVR32
+
+config AVR32_AT32AP_CPUFREQ
+	bool "CPU frequency driver for AT32AP"
+	depends on PLATFORM_AT32AP
+	default n
+	help
+	  This enables the CPU frequency driver for AT32AP processors.
+	  If in doubt, say N.
+
+endmenu
+
+menu "CPUFreq processor drivers"
+depends on IA64
+
+config IA64_ACPI_CPUFREQ
+	tristate "ACPI Processor P-States driver"
+	select CPU_FREQ_TABLE
+	depends on ACPI_PROCESSOR
+	help
+	This driver adds a CPUFreq driver which utilizes the ACPI
+	Processor Performance States.
+
+	For details, take a look at <file:Documentation/cpu-freq/>.
+
+	If in doubt, say N.
+
+endmenu
+
+menu "MIPS CPUFreq processor drivers"
+depends on MIPS
+
+config LOONGSON2_CPUFREQ
+	tristate "Loongson2 CPUFreq Driver"
+	select CPU_FREQ_TABLE
+	help
+	  This option adds a CPUFreq driver for loongson processors which
+	  support software configurable cpu frequency.
+
+	  Loongson2F and it's successors support this feature.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+endmenu
+
+menu "PowerPC CPU frequency scaling drivers"
+depends on PPC32 || PPC64
+source "drivers/cpufreq/Kconfig.powerpc"
+endmenu
+
+menu "SPARC CPU frequency scaling drivers"
+depends on SPARC64
+config SPARC_US3_CPUFREQ
+	tristate "UltraSPARC-III CPU Frequency driver"
+	select CPU_FREQ_TABLE
+	help
+	  This adds the CPUFreq driver for UltraSPARC-III processors.
+
+	  For details, take a look at <file:Documentation/cpu-freq>.
+
+	  If in doubt, say N.
+
+config SPARC_US2E_CPUFREQ
+	tristate "UltraSPARC-IIe CPU Frequency driver"
+	select CPU_FREQ_TABLE
+	help
+	  This adds the CPUFreq driver for UltraSPARC-IIe processors.
+
+	  For details, take a look at <file:Documentation/cpu-freq>.
+
+	  If in doubt, say N.
+endmenu
+
+menu "SH CPU Frequency scaling"
+depends on SUPERH
+config SH_CPU_FREQ
+	tristate "SuperH CPU Frequency driver"
+	select CPU_FREQ_TABLE
+	help
+	  This adds the cpufreq driver for SuperH. Any CPU that supports
+	  clock rate rounding through the clock framework can use this
+	  driver. While it will make the kernel slightly larger, this is
+	  harmless for CPUs that don't support rate rounding. The driver
+	  will also generate a notice in the boot log before disabling
+	  itself if the CPU in question is not capable of rate rounding.
+
+	  For details, take a look at <file:Documentation/cpu-freq>.
+
+	  If unsure, say N.
+endmenu
+
+endif
+endmenu