Initial file dump from open source releaseHEADmaster

1 files changed, 553 insertions, 0 deletions

diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c
new file mode 100644
index 00000000..ef5ca0ef
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-kota2.c
@@ -0,0 +1,553 @@
+/*
+ * kota2 board support
+ *
+ * Copyright (C) 2011  Renesas Solutions Corp.
+ * Copyright (C) 2011  Magnus Damm
+ * Copyright (C) 2010  Takashi Yoshii <yoshii.takashi.zj@renesas.com>
+ * Copyright (C) 2009  Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/smsc911x.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
+#include <linux/gpio_keys.h>
+#include <linux/leds.h>
+#include <linux/irqchip/arm-gic.h>
+#include <linux/platform_data/leds-renesas-tpu.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/sh73a0.h>
+#include <mach/common.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/traps.h>
+
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
+/* SMSC 9220 */
+static struct resource smsc9220_resources[] = {
+	[0] = {
+		.start		= 0x14000000, /* CS5A */
+		.end		= 0x140000ff, /* A1->A7 */
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= SH73A0_PINT0_IRQ(2), /* PINTA2 */
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config smsc9220_platdata = {
+	.flags		= SMSC911X_USE_32BIT, /* 32-bit SW on 16-bit HW bus */
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct platform_device eth_device = {
+	.name		= "smsc911x",
+	.id		= 0,
+	.dev  = {
+		.platform_data = &smsc9220_platdata,
+	},
+	.resource	= smsc9220_resources,
+	.num_resources	= ARRAY_SIZE(smsc9220_resources),
+};
+
+/* KEYSC */
+static struct sh_keysc_info keysc_platdata = {
+	.mode		= SH_KEYSC_MODE_6,
+	.scan_timing	= 3,
+	.delay		= 100,
+	.keycodes	= {
+		KEY_NUMERIC_STAR, KEY_NUMERIC_0, KEY_NUMERIC_POUND,
+		0, 0, 0, 0, 0,
+		KEY_NUMERIC_7, KEY_NUMERIC_8, KEY_NUMERIC_9,
+		0, KEY_DOWN, 0, 0, 0,
+		KEY_NUMERIC_4, KEY_NUMERIC_5, KEY_NUMERIC_6,
+		KEY_LEFT, KEY_ENTER, KEY_RIGHT, 0, 0,
+		KEY_NUMERIC_1, KEY_NUMERIC_2, KEY_NUMERIC_3,
+		0, KEY_UP, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+	},
+};
+
+static struct resource keysc_resources[] = {
+	[0] = {
+		.name	= "KEYSC",
+		.start	= 0xe61b0000,
+		.end	= 0xe61b0098 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_spi(71),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device keysc_device = {
+	.name		= "sh_keysc",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(keysc_resources),
+	.resource	= keysc_resources,
+	.dev		= {
+		.platform_data	= &keysc_platdata,
+	},
+};
+
+/* GPIO KEY */
+#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
+
+static struct gpio_keys_button gpio_buttons[] = {
+	GPIO_KEY(KEY_VOLUMEUP, 56, "+"), /* S2: VOL+ [IRQ9] */
+	GPIO_KEY(KEY_VOLUMEDOWN, 54, "-"), /* S3: VOL- [IRQ10] */
+	GPIO_KEY(KEY_MENU, 27, "Menu"), /* S4: MENU [IRQ30] */
+	GPIO_KEY(KEY_HOMEPAGE, 26, "Home"), /* S5: HOME [IRQ31] */
+	GPIO_KEY(KEY_BACK, 11, "Back"), /* S6: BACK [IRQ0] */
+	GPIO_KEY(KEY_PHONE, 238, "Tel"), /* S7: TEL [IRQ11] */
+	GPIO_KEY(KEY_POWER, 239, "C1"), /* S8: CAM [IRQ13] */
+	GPIO_KEY(KEY_MAIL, 224, "Mail"), /* S9: MAIL [IRQ3] */
+	/* Omitted button "C3?": 223 - S10: CUST [IRQ8] */
+	GPIO_KEY(KEY_CAMERA, 164, "C2"), /* S11: CAM_HALF [IRQ25] */
+	/* Omitted button "?": 152 - S12: CAM_FULL [No IRQ] */
+};
+
+static struct gpio_keys_platform_data gpio_key_info = {
+	.buttons        = gpio_buttons,
+	.nbuttons       = ARRAY_SIZE(gpio_buttons),
+};
+
+static struct platform_device gpio_keys_device = {
+	.name   = "gpio-keys",
+	.id     = -1,
+	.dev    = {
+		.platform_data  = &gpio_key_info,
+	},
+};
+
+/* GPIO LED */
+#define GPIO_LED(n, g) { .name = n, .gpio = g }
+
+static struct gpio_led gpio_leds[] = {
+	GPIO_LED("G", 20), /* PORT20 [GPO0] -> LED7 -> "G" */
+	GPIO_LED("H", 21), /* PORT21 [GPO1] -> LED8 -> "H" */
+	GPIO_LED("J", 22), /* PORT22 [GPO2] -> LED9 -> "J" */
+};
+
+static struct gpio_led_platform_data gpio_leds_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device gpio_leds_device = {
+	.name   = "leds-gpio",
+	.id     = -1,
+	.dev    = {
+		.platform_data  = &gpio_leds_info,
+	},
+};
+
+/* TPU LED */
+static struct led_renesas_tpu_config led_renesas_tpu12_pdata = {
+	.name		= "V2513",
+	.pin_gpio_fn	= GPIO_FN_TPU1TO2,
+	.pin_gpio	= 153,
+	.channel_offset = 0x90,
+	.timer_bit = 2,
+	.max_brightness = 1000,
+};
+
+static struct resource tpu12_resources[] = {
+	[0] = {
+		.name	= "TPU12",
+		.start	= 0xe6610090,
+		.end	= 0xe66100b5,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device leds_tpu12_device = {
+	.name = "leds-renesas-tpu",
+	.id = 12,
+	.dev = {
+		.platform_data  = &led_renesas_tpu12_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(tpu12_resources),
+	.resource	= tpu12_resources,
+};
+
+static struct led_renesas_tpu_config led_renesas_tpu41_pdata = {
+	.name		= "V2514",
+	.pin_gpio_fn	= GPIO_FN_TPU4TO1,
+	.pin_gpio	= 199,
+	.channel_offset = 0x50,
+	.timer_bit = 1,
+	.max_brightness = 1000,
+};
+
+static struct resource tpu41_resources[] = {
+	[0] = {
+		.name	= "TPU41",
+		.start	= 0xe6640050,
+		.end	= 0xe6640075,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device leds_tpu41_device = {
+	.name = "leds-renesas-tpu",
+	.id = 41,
+	.dev = {
+		.platform_data  = &led_renesas_tpu41_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(tpu41_resources),
+	.resource	= tpu41_resources,
+};
+
+static struct led_renesas_tpu_config led_renesas_tpu21_pdata = {
+	.name		= "V2515",
+	.pin_gpio_fn	= GPIO_FN_TPU2TO1,
+	.pin_gpio	= 197,
+	.channel_offset = 0x50,
+	.timer_bit = 1,
+	.max_brightness = 1000,
+};
+
+static struct resource tpu21_resources[] = {
+	[0] = {
+		.name	= "TPU21",
+		.start	= 0xe6620050,
+		.end	= 0xe6620075,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device leds_tpu21_device = {
+	.name = "leds-renesas-tpu",
+	.id = 21,
+	.dev = {
+		.platform_data  = &led_renesas_tpu21_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(tpu21_resources),
+	.resource	= tpu21_resources,
+};
+
+static struct led_renesas_tpu_config led_renesas_tpu30_pdata = {
+	.name		= "KEYLED",
+	.pin_gpio_fn	= GPIO_FN_TPU3TO0,
+	.pin_gpio	= 163,
+	.channel_offset = 0x10,
+	.timer_bit = 0,
+	.max_brightness = 1000,
+};
+
+static struct resource tpu30_resources[] = {
+	[0] = {
+		.name	= "TPU30",
+		.start	= 0xe6630010,
+		.end	= 0xe6630035,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device leds_tpu30_device = {
+	.name = "leds-renesas-tpu",
+	.id = 30,
+	.dev = {
+		.platform_data  = &led_renesas_tpu30_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(tpu30_resources),
+	.resource	= tpu30_resources,
+};
+
+/* Fixed 1.8V regulator to be used by MMCIF */
+static struct regulator_consumer_supply fixed1v8_power_consumers[] =
+{
+	REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
+};
+
+/* MMCIF */
+static struct resource mmcif_resources[] = {
+	[0] = {
+		.name   = "MMCIF",
+		.start  = 0xe6bd0000,
+		.end    = 0xe6bd00ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = gic_spi(140),
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start  = gic_spi(141),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_mmcif_plat_data mmcif_info = {
+	.ocr            = MMC_VDD_165_195,
+	.caps           = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
+};
+
+static struct platform_device mmcif_device = {
+	.name           = "sh_mmcif",
+	.id             = 0,
+	.dev            = {
+		.platform_data          = &mmcif_info,
+	},
+	.num_resources  = ARRAY_SIZE(mmcif_resources),
+	.resource       = mmcif_resources,
+};
+
+/* Fixed 3.3V regulator to be used by SDHI0 and SDHI1 */
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
+{
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
+};
+
+/* SDHI0 */
+static struct sh_mobile_sdhi_info sdhi0_info = {
+	.tmio_caps      = MMC_CAP_SD_HIGHSPEED,
+	.tmio_flags     = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
+};
+
+static struct resource sdhi0_resources[] = {
+	[0] = {
+		.name   = "SDHI0",
+		.start  = 0xee100000,
+		.end    = 0xee1000ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = gic_spi(83),
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start  = gic_spi(84),
+		.flags  = IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= gic_spi(85),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi0_device = {
+	.name           = "sh_mobile_sdhi",
+	.id             = 0,
+	.num_resources  = ARRAY_SIZE(sdhi0_resources),
+	.resource       = sdhi0_resources,
+	.dev    = {
+		.platform_data  = &sdhi0_info,
+	},
+};
+
+/* SDHI1 */
+static struct sh_mobile_sdhi_info sdhi1_info = {
+	.tmio_caps      = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ,
+	.tmio_flags     = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
+};
+
+static struct resource sdhi1_resources[] = {
+	[0] = {
+		.name   = "SDHI1",
+		.start  = 0xee120000,
+		.end    = 0xee1200ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = gic_spi(87),
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start  = gic_spi(88),
+		.flags  = IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= gic_spi(89),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi1_device = {
+	.name           = "sh_mobile_sdhi",
+	.id             = 1,
+	.num_resources  = ARRAY_SIZE(sdhi1_resources),
+	.resource       = sdhi1_resources,
+	.dev    = {
+		.platform_data  = &sdhi1_info,
+	},
+};
+
+static struct platform_device *kota2_devices[] __initdata = {
+	&eth_device,
+	&keysc_device,
+	&gpio_keys_device,
+	&gpio_leds_device,
+	&leds_tpu12_device,
+	&leds_tpu41_device,
+	&leds_tpu21_device,
+	&leds_tpu30_device,
+	&mmcif_device,
+	&sdhi0_device,
+	&sdhi1_device,
+};
+
+static unsigned long pin_pullup_conf[] = {
+	PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0),
+};
+
+static const struct pinctrl_map kota2_pinctrl_map[] = {
+	/* KEYSC */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
+				  "keysc_in8", "keysc"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
+				  "keysc_out04", "keysc"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
+				  "keysc_out5", "keysc"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
+				  "keysc_out6_0", "keysc"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
+				  "keysc_out7_0", "keysc"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
+				  "keysc_out8_0", "keysc"),
+	PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
+				      "keysc_in8", pin_pullup_conf),
+	/* MMCIF */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
+				  "mmc0_data8_0", "mmc0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
+				  "mmc0_ctrl_0", "mmc0"),
+	PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
+				    "PORT279", pin_pullup_conf),
+	PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
+				      "mmc0_data8_0", pin_pullup_conf),
+	/* SCIFA2 (UART2) */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh73a0",
+				  "scifa2_data_0", "scifa2"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh73a0",
+				  "scifa2_ctrl_0", "scifa2"),
+	/* SCIFA4 (UART1) */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0",
+				  "scifa4_data", "scifa4"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0",
+				  "scifa4_ctrl", "scifa4"),
+	/* SCIFB (BT) */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.8", "pfc-sh73a0",
+				  "scifb_data_0", "scifb"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.8", "pfc-sh73a0",
+				  "scifb_clk_0", "scifb"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.8", "pfc-sh73a0",
+				  "scifb_ctrl_0", "scifb"),
+	/* SDHI0 (microSD) */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
+				  "sdhi0_data4", "sdhi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
+				  "sdhi0_ctrl", "sdhi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
+				  "sdhi0_cd", "sdhi0"),
+	PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
+				      "sdhi0_data4", pin_pullup_conf),
+	PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
+				    "PORT256", pin_pullup_conf),
+	PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
+				    "PORT251", pin_pullup_conf),
+	/* SDHI1 (BCM4330) */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
+				  "sdhi1_data4", "sdhi1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
+				  "sdhi1_ctrl", "sdhi1"),
+	PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
+				      "sdhi1_data4", pin_pullup_conf),
+	PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
+				    "PORT263", pin_pullup_conf),
+	/* SMSC911X */
+	PIN_MAP_MUX_GROUP_DEFAULT("smsc911x.0", "pfc-sh73a0",
+				  "bsc_data_0_7", "bsc"),
+	PIN_MAP_MUX_GROUP_DEFAULT("smsc911x.0", "pfc-sh73a0",
+				  "bsc_data_8_15", "bsc"),
+	PIN_MAP_MUX_GROUP_DEFAULT("smsc911x.0", "pfc-sh73a0",
+				  "bsc_cs5_a", "bsc"),
+	PIN_MAP_MUX_GROUP_DEFAULT("smsc911x.0", "pfc-sh73a0",
+				  "bsc_we0", "bsc"),
+};
+
+static void __init kota2_init(void)
+{
+	regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers,
+				     ARRAY_SIZE(fixed1v8_power_consumers), 1800000);
+	regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers,
+				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+	regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
+	pinctrl_register_mappings(kota2_pinctrl_map,
+				  ARRAY_SIZE(kota2_pinctrl_map));
+	sh73a0_pinmux_init();
+
+	/* SMSC911X */
+	gpio_request_one(144, GPIOF_IN, NULL); /* PINTA2 */
+	gpio_request_one(145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */
+
+	/* MMCIF */
+	gpio_request_one(208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */
+
+#ifdef CONFIG_CACHE_L2X0
+	/* Early BRESP enable, Shared attribute override enable, 64K*8way */
+	l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff);
+#endif
+	sh73a0_add_standard_devices();
+	platform_add_devices(kota2_devices, ARRAY_SIZE(kota2_devices));
+}
+
+MACHINE_START(KOTA2, "kota2")
+	.smp		= smp_ops(sh73a0_smp_ops),
+	.map_io		= sh73a0_map_io,
+	.init_early	= sh73a0_add_early_devices,
+	.nr_irqs	= NR_IRQS_LEGACY,
+	.init_irq	= sh73a0_init_irq,
+	.init_machine	= kota2_init,
+	.init_late	= shmobile_init_late,
+	.init_time	= sh73a0_earlytimer_init,
+MACHINE_END