Initial file dump from open source releaseHEADmaster

5 files changed, 537 insertions, 0 deletions

diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
new file mode 100644
index 00000000..4dc2fbba
--- /dev/null
+++ b/arch/arm/mach-mxs/Kconfig
@@ -0,0 +1,32 @@
+config SOC_IMX23
+	bool
+	select ARM_AMBA
+	select ARM_CPU_SUSPEND if PM
+	select CPU_ARM926T
+	select HAVE_PWM
+	select PINCTRL_IMX23
+
+config SOC_IMX28
+	bool
+	select ARM_AMBA
+	select ARM_CPU_SUSPEND if PM
+	select CPU_ARM926T
+	select HAVE_CAN_FLEXCAN if CAN
+	select HAVE_PWM
+	select PINCTRL_IMX28
+
+config ARCH_MXS
+	bool "Freescale MXS (i.MX23, i.MX28) support"
+	depends on ARCH_MULTI_V5
+	select ARCH_REQUIRE_GPIOLIB
+	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
+	select CLKSRC_OF
+	select GENERIC_CLOCKEVENTS
+	select HAVE_CLK_PREPARE
+	select PINCTRL
+	select SOC_IMX23
+	select SOC_IMX28
+	select STMP_DEVICE
+	help
+	  Support for Freescale MXS-based family of processors
diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile
new file mode 100644
index 00000000..cc2bf674
--- /dev/null
+++ b/arch/arm/mach-mxs/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_PM) += pm.o
+obj-$(CONFIG_ARCH_MXS) += mach-mxs.o
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
new file mode 100644
index 00000000..5b62b648
--- /dev/null
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -0,0 +1,445 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clk/mxs.h>
+#include <linux/clkdev.h>
+#include <linux/clocksource.h>
+#include <linux/can/platform/flexcan.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/mxs.h>
+#include <linux/micrel_phy.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/phy.h>
+#include <linux/pinctrl/consumer.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/system_misc.h>
+
+#include "pm.h"
+
+/* MXS DIGCTL SAIF CLKMUX */
+#define MXS_DIGCTL_SAIF_CLKMUX_DIRECT		0x0
+#define MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT	0x1
+#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0		0x2
+#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1		0x3
+
+#define MXS_GPIO_NR(bank, nr)	((bank) * 32 + (nr))
+
+#define MXS_SET_ADDR		0x4
+#define MXS_CLR_ADDR		0x8
+#define MXS_TOG_ADDR		0xc
+
+static inline void __mxs_setl(u32 mask, void __iomem *reg)
+{
+	__raw_writel(mask, reg + MXS_SET_ADDR);
+}
+
+static inline void __mxs_clrl(u32 mask, void __iomem *reg)
+{
+	__raw_writel(mask, reg + MXS_CLR_ADDR);
+}
+
+static inline void __mxs_togl(u32 mask, void __iomem *reg)
+{
+	__raw_writel(mask, reg + MXS_TOG_ADDR);
+}
+
+/*
+ * MX28EVK_FLEXCAN_SWITCH is shared between both flexcan controllers
+ */
+#define MX28EVK_FLEXCAN_SWITCH	MXS_GPIO_NR(2, 13)
+
+static int flexcan0_en, flexcan1_en;
+
+static void mx28evk_flexcan_switch(void)
+{
+	if (flexcan0_en || flexcan1_en)
+		gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 1);
+	else
+		gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 0);
+}
+
+static void mx28evk_flexcan0_switch(int enable)
+{
+	flexcan0_en = enable;
+	mx28evk_flexcan_switch();
+}
+
+static void mx28evk_flexcan1_switch(int enable)
+{
+	flexcan1_en = enable;
+	mx28evk_flexcan_switch();
+}
+
+static struct flexcan_platform_data flexcan_pdata[2];
+
+static struct of_dev_auxdata mxs_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("fsl,imx28-flexcan", 0x80032000, NULL, &flexcan_pdata[0]),
+	OF_DEV_AUXDATA("fsl,imx28-flexcan", 0x80034000, NULL, &flexcan_pdata[1]),
+	{ /* sentinel */ }
+};
+
+#define OCOTP_WORD_OFFSET		0x20
+#define OCOTP_WORD_COUNT		0x20
+
+#define BM_OCOTP_CTRL_BUSY		(1 << 8)
+#define BM_OCOTP_CTRL_ERROR		(1 << 9)
+#define BM_OCOTP_CTRL_RD_BANK_OPEN	(1 << 12)
+
+static DEFINE_MUTEX(ocotp_mutex);
+static u32 ocotp_words[OCOTP_WORD_COUNT];
+
+static const u32 *mxs_get_ocotp(void)
+{
+	struct device_node *np;
+	void __iomem *ocotp_base;
+	int timeout = 0x400;
+	size_t i;
+	static int once;
+
+	if (once)
+		return ocotp_words;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,ocotp");
+	ocotp_base = of_iomap(np, 0);
+	WARN_ON(!ocotp_base);
+
+	mutex_lock(&ocotp_mutex);
+
+	/*
+	 * clk_enable(hbus_clk) for ocotp can be skipped
+	 * as it must be on when system is running.
+	 */
+
+	/* try to clear ERROR bit */
+	__mxs_clrl(BM_OCOTP_CTRL_ERROR, ocotp_base);
+
+	/* check both BUSY and ERROR cleared */
+	while ((__raw_readl(ocotp_base) &
+		(BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)) && --timeout)
+		cpu_relax();
+
+	if (unlikely(!timeout))
+		goto error_unlock;
+
+	/* open OCOTP banks for read */
+	__mxs_setl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);
+
+	/* approximately wait 32 hclk cycles */
+	udelay(1);
+
+	/* poll BUSY bit becoming cleared */
+	timeout = 0x400;
+	while ((__raw_readl(ocotp_base) & BM_OCOTP_CTRL_BUSY) && --timeout)
+		cpu_relax();
+
+	if (unlikely(!timeout))
+		goto error_unlock;
+
+	for (i = 0; i < OCOTP_WORD_COUNT; i++)
+		ocotp_words[i] = __raw_readl(ocotp_base + OCOTP_WORD_OFFSET +
+						i * 0x10);
+
+	/* close banks for power saving */
+	__mxs_clrl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);
+
+	once = 1;
+
+	mutex_unlock(&ocotp_mutex);
+
+	return ocotp_words;
+
+error_unlock:
+	mutex_unlock(&ocotp_mutex);
+	pr_err("%s: timeout in reading OCOTP\n", __func__);
+	return NULL;
+}
+
+enum mac_oui {
+	OUI_FSL,
+	OUI_DENX,
+	OUI_CRYSTALFONTZ,
+};
+
+static void __init update_fec_mac_prop(enum mac_oui oui)
+{
+	struct device_node *np, *from = NULL;
+	struct property *newmac;
+	const u32 *ocotp = mxs_get_ocotp();
+	u8 *macaddr;
+	u32 val;
+	int i;
+
+	for (i = 0; i < 2; i++) {
+		np = of_find_compatible_node(from, NULL, "fsl,imx28-fec");
+		if (!np)
+			return;
+
+		from = np;
+
+		if (of_get_property(np, "local-mac-address", NULL))
+			continue;
+
+		newmac = kzalloc(sizeof(*newmac) + 6, GFP_KERNEL);
+		if (!newmac)
+			return;
+		newmac->value = newmac + 1;
+		newmac->length = 6;
+
+		newmac->name = kstrdup("local-mac-address", GFP_KERNEL);
+		if (!newmac->name) {
+			kfree(newmac);
+			return;
+		}
+
+		/*
+		 * OCOTP only stores the last 4 octets for each mac address,
+		 * so hard-code OUI here.
+		 */
+		macaddr = newmac->value;
+		switch (oui) {
+		case OUI_FSL:
+			macaddr[0] = 0x00;
+			macaddr[1] = 0x04;
+			macaddr[2] = 0x9f;
+			break;
+		case OUI_DENX:
+			macaddr[0] = 0xc0;
+			macaddr[1] = 0xe5;
+			macaddr[2] = 0x4e;
+			break;
+		case OUI_CRYSTALFONTZ:
+			macaddr[0] = 0x58;
+			macaddr[1] = 0xb9;
+			macaddr[2] = 0xe1;
+			break;
+		}
+		val = ocotp[i];
+		macaddr[3] = (val >> 16) & 0xff;
+		macaddr[4] = (val >> 8) & 0xff;
+		macaddr[5] = (val >> 0) & 0xff;
+
+		of_update_property(np, newmac);
+	}
+}
+
+static inline void enable_clk_enet_out(void)
+{
+	struct clk *clk = clk_get_sys("enet_out", NULL);
+
+	if (!IS_ERR(clk))
+		clk_prepare_enable(clk);
+}
+
+static void __init imx28_evk_init(void)
+{
+	update_fec_mac_prop(OUI_FSL);
+
+	mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
+}
+
+static void __init imx28_evk_post_init(void)
+{
+	if (!gpio_request_one(MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT,
+			      "flexcan-switch")) {
+		flexcan_pdata[0].transceiver_switch = mx28evk_flexcan0_switch;
+		flexcan_pdata[1].transceiver_switch = mx28evk_flexcan1_switch;
+	}
+}
+
+static int apx4devkit_phy_fixup(struct phy_device *phy)
+{
+	phy->dev_flags |= MICREL_PHY_50MHZ_CLK;
+	return 0;
+}
+
+static void __init apx4devkit_init(void)
+{
+	enable_clk_enet_out();
+
+	if (IS_BUILTIN(CONFIG_PHYLIB))
+		phy_register_fixup_for_uid(PHY_ID_KSZ8051, MICREL_PHY_ID_MASK,
+					   apx4devkit_phy_fixup);
+}
+
+#define ENET0_MDC__GPIO_4_0	MXS_GPIO_NR(4, 0)
+#define ENET0_MDIO__GPIO_4_1	MXS_GPIO_NR(4, 1)
+#define ENET0_RX_EN__GPIO_4_2	MXS_GPIO_NR(4, 2)
+#define ENET0_RXD0__GPIO_4_3	MXS_GPIO_NR(4, 3)
+#define ENET0_RXD1__GPIO_4_4	MXS_GPIO_NR(4, 4)
+#define ENET0_TX_EN__GPIO_4_6	MXS_GPIO_NR(4, 6)
+#define ENET0_TXD0__GPIO_4_7	MXS_GPIO_NR(4, 7)
+#define ENET0_TXD1__GPIO_4_8	MXS_GPIO_NR(4, 8)
+#define ENET_CLK__GPIO_4_16	MXS_GPIO_NR(4, 16)
+
+#define TX28_FEC_PHY_POWER	MXS_GPIO_NR(3, 29)
+#define TX28_FEC_PHY_RESET	MXS_GPIO_NR(4, 13)
+#define TX28_FEC_nINT		MXS_GPIO_NR(4, 5)
+
+static const struct gpio tx28_gpios[] __initconst = {
+	{ ENET0_MDC__GPIO_4_0, GPIOF_OUT_INIT_LOW, "GPIO_4_0" },
+	{ ENET0_MDIO__GPIO_4_1, GPIOF_OUT_INIT_LOW, "GPIO_4_1" },
+	{ ENET0_RX_EN__GPIO_4_2, GPIOF_OUT_INIT_LOW, "GPIO_4_2" },
+	{ ENET0_RXD0__GPIO_4_3, GPIOF_OUT_INIT_LOW, "GPIO_4_3" },
+	{ ENET0_RXD1__GPIO_4_4, GPIOF_OUT_INIT_LOW, "GPIO_4_4" },
+	{ ENET0_TX_EN__GPIO_4_6, GPIOF_OUT_INIT_LOW, "GPIO_4_6" },
+	{ ENET0_TXD0__GPIO_4_7, GPIOF_OUT_INIT_LOW, "GPIO_4_7" },
+	{ ENET0_TXD1__GPIO_4_8, GPIOF_OUT_INIT_LOW, "GPIO_4_8" },
+	{ ENET_CLK__GPIO_4_16, GPIOF_OUT_INIT_LOW, "GPIO_4_16" },
+	{ TX28_FEC_PHY_POWER, GPIOF_OUT_INIT_LOW, "fec-phy-power" },
+	{ TX28_FEC_PHY_RESET, GPIOF_OUT_INIT_LOW, "fec-phy-reset" },
+	{ TX28_FEC_nINT, GPIOF_DIR_IN, "fec-int" },
+};
+
+static void __init tx28_post_init(void)
+{
+	struct device_node *np;
+	struct platform_device *pdev;
+	struct pinctrl *pctl;
+	int ret;
+
+	enable_clk_enet_out();
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx28-fec");
+	pdev = of_find_device_by_node(np);
+	if (!pdev) {
+		pr_err("%s: failed to find fec device\n", __func__);
+		return;
+	}
+
+	pctl = pinctrl_get_select(&pdev->dev, "gpio_mode");
+	if (IS_ERR(pctl)) {
+		pr_err("%s: failed to get pinctrl state\n", __func__);
+		return;
+	}
+
+	ret = gpio_request_array(tx28_gpios, ARRAY_SIZE(tx28_gpios));
+	if (ret) {
+		pr_err("%s: failed to request gpios: %d\n", __func__, ret);
+		return;
+	}
+
+	/* Power up fec phy */
+	gpio_set_value(TX28_FEC_PHY_POWER, 1);
+	msleep(26); /* 25ms according to data sheet */
+
+	/* Mode strap pins */
+	gpio_set_value(ENET0_RX_EN__GPIO_4_2, 1);
+	gpio_set_value(ENET0_RXD0__GPIO_4_3, 1);
+	gpio_set_value(ENET0_RXD1__GPIO_4_4, 1);
+
+	udelay(100); /* minimum assertion time for nRST */
+
+	/* Deasserting FEC PHY RESET */
+	gpio_set_value(TX28_FEC_PHY_RESET, 1);
+
+	pinctrl_put(pctl);
+}
+
+static void __init cfa10049_init(void)
+{
+	update_fec_mac_prop(OUI_CRYSTALFONTZ);
+}
+
+static void __init cfa10037_init(void)
+{
+	update_fec_mac_prop(OUI_CRYSTALFONTZ);
+}
+
+static void __init mxs_machine_init(void)
+{
+	if (of_machine_is_compatible("fsl,imx28-evk"))
+		imx28_evk_init();
+	else if (of_machine_is_compatible("bluegiga,apx4devkit"))
+		apx4devkit_init();
+	else if (of_machine_is_compatible("crystalfontz,cfa10037"))
+		cfa10037_init();
+	else if (of_machine_is_compatible("crystalfontz,cfa10049"))
+		cfa10049_init();
+
+	of_platform_populate(NULL, of_default_bus_match_table,
+			     mxs_auxdata_lookup, NULL);
+
+	if (of_machine_is_compatible("karo,tx28"))
+		tx28_post_init();
+
+	if (of_machine_is_compatible("fsl,imx28-evk"))
+		imx28_evk_post_init();
+}
+
+#define MX23_CLKCTRL_RESET_OFFSET	0x120
+#define MX28_CLKCTRL_RESET_OFFSET	0x1e0
+#define MXS_CLKCTRL_RESET_CHIP		(1 << 1)
+
+/*
+ * Reset the system. It is called by machine_restart().
+ */
+static void mxs_restart(char mode, const char *cmd)
+{
+	struct device_node *np;
+	void __iomem *reset_addr;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,clkctrl");
+	reset_addr = of_iomap(np, 0);
+	if (!reset_addr)
+		goto soft;
+
+	if (of_device_is_compatible(np, "fsl,imx23-clkctrl"))
+		reset_addr += MX23_CLKCTRL_RESET_OFFSET;
+	else
+		reset_addr += MX28_CLKCTRL_RESET_OFFSET;
+
+	/* reset the chip */
+	__mxs_setl(MXS_CLKCTRL_RESET_CHIP, reset_addr);
+
+	pr_err("Failed to assert the chip reset\n");
+
+	/* Delay to allow the serial port to show the message */
+	mdelay(50);
+
+soft:
+	/* We'll take a jump through zero as a poor second */
+	soft_restart(0);
+}
+
+static void __init mxs_timer_init(void)
+{
+	if (of_machine_is_compatible("fsl,imx23"))
+		mx23_clocks_init();
+	else
+		mx28_clocks_init();
+	clocksource_of_init();
+}
+
+static const char *mxs_dt_compat[] __initdata = {
+	"fsl,imx28",
+	"fsl,imx23",
+	NULL,
+};
+
+DT_MACHINE_START(MXS, "Freescale MXS (Device Tree)")
+	.map_io		= debug_ll_io_init,
+	.init_irq	= irqchip_init,
+	.handle_irq	= icoll_handle_irq,
+	.init_time	= mxs_timer_init,
+	.init_machine	= mxs_machine_init,
+	.init_late      = mxs_pm_init,
+	.dt_compat	= mxs_dt_compat,
+	.restart	= mxs_restart,
+MACHINE_END
diff --git a/arch/arm/mach-mxs/pm.c b/arch/arm/mach-mxs/pm.c
new file mode 100644
index 00000000..b2494d2d
--- /dev/null
+++ b/arch/arm/mach-mxs/pm.c
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/suspend.h>
+#include <linux/io.h>
+
+static int mxs_suspend_enter(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_MEM:
+		cpu_do_idle();
+		break;
+
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static struct platform_suspend_ops mxs_suspend_ops = {
+	.enter = mxs_suspend_enter,
+	.valid = suspend_valid_only_mem,
+};
+
+void __init mxs_pm_init(void)
+{
+	suspend_set_ops(&mxs_suspend_ops);
+}
diff --git a/arch/arm/mach-mxs/pm.h b/arch/arm/mach-mxs/pm.h
new file mode 100644
index 00000000..09d77b00
--- /dev/null
+++ b/arch/arm/mach-mxs/pm.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_MXS_PM_H
+#define __ARCH_MXS_PM_H
+
+#ifdef CONFIG_PM
+void mxs_pm_init(void);
+#else
+#define mxs_pm_init NULL
+#endif
+
+#endif