Initial file dump from open source releaseHEADmaster

53 files changed, 6082 insertions, 0 deletions

diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
new file mode 100644
index 00000000..7509a89a
--- /dev/null
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -0,0 +1,322 @@
+if ARCH_KIRKWOOD
+
+menu "Marvell Kirkwood Implementations"
+
+config MACH_D2NET_V2
+	bool "LaCie d2 Network v2 NAS Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  LaCie d2 Network v2 NAS.
+
+config MACH_DB88F6281_BP
+	bool "Marvell DB-88F6281-BP Development Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell DB-88F6281-BP Development Board.
+
+config MACH_DOCKSTAR
+	bool "Seagate FreeAgent DockStar"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Seagate FreeAgent DockStar.
+
+config MACH_ESATA_SHEEVAPLUG
+	bool "Marvell eSATA SheevaPlug Reference Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell eSATA SheevaPlug Reference Board.
+
+config MACH_GURUPLUG
+	bool "Marvell GuruPlug Reference Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell GuruPlug Reference Board.
+
+config MACH_INETSPACE_V2
+	bool "LaCie Internet Space v2 NAS Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  LaCie Internet Space v2 NAS.
+
+config MACH_MV88F6281GTW_GE
+	bool "Marvell 88F6281 GTW GE Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell 88F6281 GTW GE Board.
+
+config MACH_NET2BIG_V2
+	bool "LaCie 2Big Network v2 NAS Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  LaCie 2Big Network v2 NAS.
+
+config MACH_NET5BIG_V2
+	bool "LaCie 5Big Network v2 NAS Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  LaCie 5Big Network v2 NAS.
+
+config MACH_NETSPACE_MAX_V2
+	bool "LaCie Network Space Max v2 NAS Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  LaCie Network Space Max v2 NAS.
+
+config MACH_NETSPACE_V2
+	bool "LaCie Network Space v2 NAS Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  LaCie Network Space v2 NAS.
+
+config MACH_OPENRD
+        bool
+
+config MACH_OPENRD_BASE
+	bool "Marvell OpenRD Base Board"
+	select MACH_OPENRD
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell OpenRD Base Board.
+
+config MACH_OPENRD_CLIENT
+	bool "Marvell OpenRD Client Board"
+	select MACH_OPENRD
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell OpenRD Client Board.
+
+config MACH_OPENRD_ULTIMATE
+	bool "Marvell OpenRD Ultimate Board"
+	select MACH_OPENRD
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell OpenRD Ultimate Board.
+
+config MACH_RD88F6192_NAS
+	bool "Marvell RD-88F6192-NAS Reference Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell RD-88F6192-NAS Reference Board.
+
+config MACH_RD88F6281
+	bool "Marvell RD-88F6281 Reference Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell RD-88F6281 Reference Board.
+
+config MACH_SHEEVAPLUG
+	bool "Marvell SheevaPlug Reference Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell SheevaPlug Reference Board.
+
+config MACH_T5325
+	bool "HP t5325 Thin Client"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  HP t5325 Thin Client.
+
+config MACH_TS219
+	bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and
+	  TS-219P+ Turbo NAS devices.
+
+config MACH_TS41X
+	bool "QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo NAS"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo
+	  NAS devices.
+
+comment "Device tree entries"
+
+config ARCH_KIRKWOOD_DT
+	bool "Marvell Kirkwood Flattened Device Tree"
+	select POWER_SUPPLY
+	select POWER_RESET
+	select POWER_RESET_GPIO
+	select REGULATOR
+	select REGULATOR_FIXED_VOLTAGE
+	select MVEBU_CLK_CORE
+	select MVEBU_CLK_GATING
+	select USE_OF
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell Kirkwood using flattened device tree.
+
+config MACH_CLOUDBOX_DT
+	bool "LaCie CloudBox NAS (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the LaCie
+	  CloudBox NAS, using Flattened Device Tree.
+
+config MACH_DLINK_KIRKWOOD_DT
+	bool "D-Link Kirkwood-based NAS (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Kirkwood-based D-Link NASes such as DNS-320 & DNS-325,
+	  using Flattened Device Tree.
+
+config MACH_DOCKSTAR_DT
+	bool "Seagate FreeAgent Dockstar (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Seagate FreeAgent Dockstar (Flattened Device Tree).
+
+config MACH_DREAMPLUG_DT
+	bool "Marvell DreamPlug (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell DreamPlug (Flattened Device Tree).
+
+config MACH_GOFLEXNET_DT
+	bool "Seagate GoFlex Net (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Seagate GoFlex Net (Flattened Device Tree).
+
+config MACH_GURUPLUG_DT
+	bool "Marvell GuruPlug Reference Board (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell GuruPlug Reference Board (Flattened Device Tree).
+
+config MACH_IB62X0_DT
+	bool "RaidSonic IB-NAS6210, IB-NAS6220 (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  RaidSonic IB-NAS6210 & IB-NAS6220 devices, using
+	  Flattened Device Tree.
+
+config MACH_ICONNECT_DT
+	bool "Iomega Iconnect (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here to enable Iomega Iconnect support.
+
+config MACH_INETSPACE_V2_DT
+	bool "LaCie Internet Space v2 NAS (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the LaCie
+	  Internet Space v2 NAS, using Flattened Device Tree.
+
+config MACH_IOMEGA_IX2_200_DT
+	bool "Iomega StorCenter ix2-200 (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Iomega StorCenter ix2-200 (Flattened Device Tree).
+
+config MACH_KM_KIRKWOOD_DT
+	bool "Keymile Kirkwood Reference Design (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Keymile Kirkwood Reference Desgin, using Flattened Device Tree.
+
+config MACH_LSXL_DT
+	bool "Buffalo Linkstation LS-XHL, LS-CHLv2 (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using
+	  Flattened Device Tree.
+
+config MACH_MPLCEC4_DT
+	bool "MPL CEC4 (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  MPL CEC4 (Flattened Device Tree).
+
+config MACH_NETSPACE_LITE_V2_DT
+	bool "LaCie Network Space Lite v2 NAS (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the LaCie
+	  Network Space Lite v2 NAS, using Flattened Device Tree.
+
+config MACH_NETSPACE_MAX_V2_DT
+	bool "LaCie Network Space Max v2 NAS (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the LaCie
+	  Network Space Max v2 NAS, using Flattened Device Tree.
+
+config MACH_NETSPACE_MINI_V2_DT
+	bool "LaCie Network Space Mini v2 NAS (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the LaCie
+	  Network Space Mini v2 NAS using Flattened Device Tree.
+
+	  This board is embedded in a product named CloudBox, which
+	  provides automatic backup on a 100GB cloud storage. This
+	  should not confused with a more recent LaCie NAS also named
+	  CloudBox. For this last, the disk capacity is 1TB or above.
+
+config MACH_NETSPACE_V2_DT
+	bool "LaCie Network Space v2 NAS (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the LaCie
+	  Network Space v2 NAS, using Flattened Device Tree.
+
+config MACH_NSA310_DT
+	bool "ZyXEL NSA-310 (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	select ARM_ATAG_DTB_COMPAT
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  ZyXEL NSA-310 board (Flattened Device Tree).
+
+config MACH_OPENBLOCKS_A6_DT
+	bool "Plat'Home OpenBlocks A6 (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Plat'Home OpenBlocks A6 (Flattened Device Tree).
+
+config MACH_READYNAS_DT
+	bool "NETGEAR ReadyNAS Duo v2 (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	select ARM_APPENDED_DTB
+	select ARM_ATAG_DTB_COMPAT
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  NETGEAR ReadyNAS Duo v2 using Fattened Device Tree.
+
+config MACH_TOPKICK_DT
+	bool "USI Topkick (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  USI Topkick, using Flattened Device Tree
+
+config MACH_TS219_DT
+	bool "Device Tree for QNAP TS-11X, TS-21X NAS"
+	select ARCH_KIRKWOOD_DT
+	select ARM_APPENDED_DTB
+	select ARM_ATAG_DTB_COMPAT
+	help
+	  Say 'Y' here if you want your kernel to support the QNAP
+	  TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and
+	  TS-219P+ Turbo NAS devices using Fattened Device Tree.
+	  There are two different Device Tree descriptions, depending
+	  on if the device is based on an if the board uses the MV6281
+	  or MV6282. If you have the wrong one, the buttons will not
+	  work.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
new file mode 100644
index 00000000..e1f3735d
--- /dev/null
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -0,0 +1,44 @@
+obj-y				+= common.o irq.o pcie.o mpp.o
+
+obj-$(CONFIG_MACH_D2NET_V2)		+= d2net_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_DB88F6281_BP)		+= db88f6281-bp-setup.o
+obj-$(CONFIG_MACH_DOCKSTAR)		+= dockstar-setup.o
+obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG)	+= sheevaplug-setup.o
+obj-$(CONFIG_MACH_GURUPLUG)		+= guruplug-setup.o
+obj-$(CONFIG_MACH_INETSPACE_V2)		+= netspace_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_MV88F6281GTW_GE)	+= mv88f6281gtw_ge-setup.o
+obj-$(CONFIG_MACH_NET2BIG_V2)		+= netxbig_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_NET5BIG_V2)		+= netxbig_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_NETSPACE_MAX_V2)	+= netspace_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_NETSPACE_V2)		+= netspace_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_OPENRD)		+= openrd-setup.o
+obj-$(CONFIG_MACH_RD88F6192_NAS)	+= rd88f6192-nas-setup.o
+obj-$(CONFIG_MACH_RD88F6281)		+= rd88f6281-setup.o
+obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheevaplug-setup.o
+obj-$(CONFIG_MACH_T5325)		+= t5325-setup.o
+obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o tsx1x-common.o
+obj-$(CONFIG_MACH_TS41X)		+= ts41x-setup.o tsx1x-common.o
+
+obj-$(CONFIG_ARCH_KIRKWOOD_DT)		+= board-dt.o
+obj-$(CONFIG_MACH_CLOUDBOX_DT)		+= board-ns2.o
+obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT)	+= board-dnskw.o
+obj-$(CONFIG_MACH_DOCKSTAR_DT)		+= board-dockstar.o
+obj-$(CONFIG_MACH_DREAMPLUG_DT)		+= board-dreamplug.o
+obj-$(CONFIG_MACH_GOFLEXNET_DT)		+= board-goflexnet.o
+obj-$(CONFIG_MACH_GURUPLUG_DT)		+= board-guruplug.o
+obj-$(CONFIG_MACH_IB62X0_DT)		+= board-ib62x0.o
+obj-$(CONFIG_MACH_ICONNECT_DT)		+= board-iconnect.o
+obj-$(CONFIG_MACH_INETSPACE_V2_DT)	+= board-ns2.o
+obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT)	+= board-iomega_ix2_200.o
+obj-$(CONFIG_MACH_KM_KIRKWOOD_DT)	+= board-km_kirkwood.o
+obj-$(CONFIG_MACH_LSXL_DT)		+= board-lsxl.o
+obj-$(CONFIG_MACH_MPLCEC4_DT)		+= board-mplcec4.o
+obj-$(CONFIG_MACH_NETSPACE_LITE_V2_DT)	+= board-ns2.o
+obj-$(CONFIG_MACH_NETSPACE_MAX_V2_DT)	+= board-ns2.o
+obj-$(CONFIG_MACH_NETSPACE_MINI_V2_DT)	+= board-ns2.o
+obj-$(CONFIG_MACH_NETSPACE_V2_DT)	+= board-ns2.o
+obj-$(CONFIG_MACH_NSA310_DT)		+= board-nsa310.o
+obj-$(CONFIG_MACH_OPENBLOCKS_A6_DT)	+= board-openblocks_a6.o
+obj-$(CONFIG_MACH_READYNAS_DT)		+= board-readynas.o
+obj-$(CONFIG_MACH_TOPKICK_DT)		+= board-usi_topkick.o
+obj-$(CONFIG_MACH_TS219_DT)		+= board-ts219.o tsx1x-common.o
diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot
new file mode 100644
index 00000000..760a0efe
--- /dev/null
+++ b/arch/arm/mach-kirkwood/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y	+= 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y	:= 0x00800000
diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c
new file mode 100644
index 00000000..a1aa87f0
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-dnskw.c
@@ -0,0 +1,43 @@
+/*
+ * Copyright 2012 (C), Jamie Lentin <jm@lentin.co.uk>
+ *
+ * arch/arm/mach-kirkwood/board-dnskw.c
+ *
+ * D-link DNS-320 & DNS-325 NAS Init for drivers not converted to
+ * flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data dnskw_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+/* Register any GPIO for output and set the value */
+static void __init dnskw_gpio_register(unsigned gpio, char *name, int def)
+{
+	if (gpio_request(gpio, name) == 0 &&
+	    gpio_direction_output(gpio, 0) == 0) {
+		gpio_set_value(gpio, def);
+		if (gpio_export(gpio, 0) != 0)
+			pr_err("dnskw: Failed to export GPIO %s\n", name);
+	} else
+		pr_err("dnskw: Failed to register %s\n", name);
+}
+
+void __init dnskw_init(void)
+{
+	kirkwood_ge00_init(&dnskw_ge00_data);
+
+	/* Set NAS to turn back on after a power failure */
+	dnskw_gpio_register(37, "dnskw:power:recover", 1);
+}
diff --git a/arch/arm/mach-kirkwood/board-dockstar.c b/arch/arm/mach-kirkwood/board-dockstar.c
new file mode 100644
index 00000000..d7196db3
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-dockstar.c
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-kirkwood/board-dockstar.c
+ *
+ * Seagate FreeAgent Dockstar Board Init for drivers not converted to
+ * flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Copied and modified for Seagate GoFlex Net support by
+ * Joshua Coombs <josh.coombs@gmail.com> based on ArchLinux ARM's
+ * GoFlex kernel patches.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mv643xx_eth.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data dockstar_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+void __init dockstar_dt_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_ge00_init(&dockstar_ge00_data);
+}
diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c
new file mode 100644
index 00000000..0903242c
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-dreamplug.c
@@ -0,0 +1,35 @@
+/*
+ * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
+ *
+ * arch/arm/mach-kirkwood/board-dreamplug.c
+ *
+ * Marvell DreamPlug Reference Board Init for drivers not converted to
+ * flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data dreamplug_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv643xx_eth_platform_data dreamplug_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(1),
+};
+
+void __init dreamplug_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_ge00_init(&dreamplug_ge00_data);
+	kirkwood_ge01_init(&dreamplug_ge01_data);
+}
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
new file mode 100644
index 00000000..e9647b80
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -0,0 +1,201 @@
+/*
+ * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
+ *
+ * arch/arm/mach-kirkwood/board-dt.c
+ *
+ * Flattened Device Tree board initialization
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/clk-provider.h>
+#include <linux/clk/mvebu.h>
+#include <linux/kexec.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/bridge-regs.h>
+#include <linux/platform_data/usb-ehci-orion.h>
+#include <plat/irq.h>
+#include <plat/common.h>
+#include "common.h"
+
+static struct of_device_id kirkwood_dt_match_table[] __initdata = {
+	{ .compatible = "simple-bus", },
+	{ }
+};
+
+/*
+ * There are still devices that doesn't know about DT yet.  Get clock
+ * gates here and add a clock lookup alias, so that old platform
+ * devices still work.
+*/
+
+static void __init kirkwood_legacy_clk_init(void)
+{
+
+	struct device_node *np = of_find_compatible_node(
+		NULL, NULL, "marvell,kirkwood-gating-clock");
+	struct of_phandle_args clkspec;
+	struct clk *clk;
+
+	clkspec.np = np;
+	clkspec.args_count = 1;
+
+	clkspec.args[0] = CGC_BIT_PEX0;
+	orion_clkdev_add("0", "pcie",
+			 of_clk_get_from_provider(&clkspec));
+
+	clkspec.args[0] = CGC_BIT_PEX1;
+	orion_clkdev_add("1", "pcie",
+			 of_clk_get_from_provider(&clkspec));
+
+	clkspec.args[0] = CGC_BIT_SDIO;
+	orion_clkdev_add(NULL, "mvsdio",
+			 of_clk_get_from_provider(&clkspec));
+
+	/*
+	 * The ethernet interfaces forget the MAC address assigned by
+	 * u-boot if the clocks are turned off. Until proper DT support
+	 * is available we always enable them for now.
+	 */
+	clkspec.args[0] = CGC_BIT_GE0;
+	clk = of_clk_get_from_provider(&clkspec);
+	orion_clkdev_add(NULL, "mv643xx_eth_port.0", clk);
+	clk_prepare_enable(clk);
+
+	clkspec.args[0] = CGC_BIT_GE1;
+	clk = of_clk_get_from_provider(&clkspec);
+	orion_clkdev_add(NULL, "mv643xx_eth_port.1", clk);
+	clk_prepare_enable(clk);
+}
+
+static void __init kirkwood_of_clk_init(void)
+{
+	mvebu_clocks_init();
+	kirkwood_legacy_clk_init();
+}
+
+static void __init kirkwood_dt_init(void)
+{
+	pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk);
+
+	/*
+	 * Disable propagation of mbus errors to the CPU local bus,
+	 * as this causes mbus errors (which can occur for example
+	 * for PCI aborts) to throw CPU aborts, which we're not set
+	 * up to deal with.
+	 */
+	writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
+
+	kirkwood_setup_wins();
+
+	kirkwood_l2_init();
+
+	/* Setup root of clk tree */
+	kirkwood_of_clk_init();
+
+	kirkwood_cpuidle_init();
+
+#ifdef CONFIG_KEXEC
+	kexec_reinit = kirkwood_enable_pcie;
+#endif
+
+	if (of_machine_is_compatible("globalscale,dreamplug"))
+		dreamplug_init();
+
+	if (of_machine_is_compatible("globalscale,guruplug"))
+		guruplug_dt_init();
+
+	if (of_machine_is_compatible("dlink,dns-kirkwood"))
+		dnskw_init();
+
+	if (of_machine_is_compatible("iom,iconnect"))
+		iconnect_init();
+
+	if (of_machine_is_compatible("raidsonic,ib-nas62x0"))
+		ib62x0_init();
+
+	if (of_machine_is_compatible("qnap,ts219"))
+		qnap_dt_ts219_init();
+
+	if (of_machine_is_compatible("seagate,dockstar"))
+		dockstar_dt_init();
+
+	if (of_machine_is_compatible("seagate,goflexnet"))
+		goflexnet_init();
+
+	if (of_machine_is_compatible("buffalo,lsxl"))
+		lsxl_init();
+
+	if (of_machine_is_compatible("iom,ix2-200"))
+		iomega_ix2_200_init();
+
+	if (of_machine_is_compatible("keymile,km_kirkwood"))
+		km_kirkwood_init();
+
+	if (of_machine_is_compatible("lacie,cloudbox") ||
+	    of_machine_is_compatible("lacie,inetspace_v2") ||
+	    of_machine_is_compatible("lacie,netspace_lite_v2") ||
+	    of_machine_is_compatible("lacie,netspace_max_v2") ||
+	    of_machine_is_compatible("lacie,netspace_mini_v2") ||
+	    of_machine_is_compatible("lacie,netspace_v2"))
+		ns2_init();
+
+	if (of_machine_is_compatible("mpl,cec4"))
+		mplcec4_init();
+
+	if (of_machine_is_compatible("netgear,readynas-duo-v2"))
+		netgear_readynas_init();
+
+	if (of_machine_is_compatible("plathome,openblocks-a6"))
+		openblocks_a6_init();
+
+	if (of_machine_is_compatible("usi,topkick"))
+		usi_topkick_init();
+
+	of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL);
+}
+
+static const char * const kirkwood_dt_board_compat[] = {
+	"globalscale,dreamplug",
+	"globalscale,guruplug",
+	"dlink,dns-320",
+	"dlink,dns-325",
+	"iom,iconnect",
+	"raidsonic,ib-nas62x0",
+	"qnap,ts219",
+	"seagate,dockstar",
+	"seagate,goflexnet",
+	"buffalo,lsxl",
+	"iom,ix2-200",
+	"keymile,km_kirkwood",
+	"lacie,cloudbox",
+	"lacie,inetspace_v2",
+	"lacie,netspace_lite_v2",
+	"lacie,netspace_max_v2",
+	"lacie,netspace_mini_v2",
+	"lacie,netspace_v2",
+	"mpl,cec4",
+	"netgear,readynas-duo-v2",
+	"plathome,openblocks-a6",
+	"usi,topkick",
+	"zyxel,nsa310",
+	NULL
+};
+
+DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)")
+	/* Maintainer: Jason Cooper <jason@lakedaemon.net> */
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= orion_dt_init_irq,
+	.init_time	= kirkwood_timer_init,
+	.init_machine	= kirkwood_dt_init,
+	.restart	= kirkwood_restart,
+	.dt_compat	= kirkwood_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/board-goflexnet.c b/arch/arm/mach-kirkwood/board-goflexnet.c
new file mode 100644
index 00000000..9db979ae
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-goflexnet.c
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
+ *
+ * arch/arm/mach-kirkwood/board-goflexnet.c
+ *
+ * Seagate GoFlext Net Board Init for drivers not converted to
+ * flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Copied and modified for Seagate GoFlex Net support by
+ * Joshua Coombs <josh.coombs@gmail.com> based on ArchLinux ARM's
+ * GoFlex kernel patches.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mv643xx_eth.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data goflexnet_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+void __init goflexnet_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_ge00_init(&goflexnet_ge00_data);
+}
diff --git a/arch/arm/mach-kirkwood/board-guruplug.c b/arch/arm/mach-kirkwood/board-guruplug.c
new file mode 100644
index 00000000..a8571639
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-guruplug.c
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-kirkwood/board-guruplug.c
+ *
+ * Marvell Guruplug Reference Board Init for drivers not converted to
+ * flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data guruplug_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv643xx_eth_platform_data guruplug_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(1),
+};
+
+void __init guruplug_dt_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_ge00_init(&guruplug_ge00_data);
+	kirkwood_ge01_init(&guruplug_ge01_data);
+}
diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c
new file mode 100644
index 00000000..9a857ae8
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-ib62x0.c
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2012 (C), Simon Baatz <gmbnomis@gmail.com>
+ *
+ * arch/arm/mach-kirkwood/board-ib62x0.c
+ *
+ * RaidSonic ICY BOX IB-NAS6210 & IB-NAS6220 init for drivers not
+ * converted to flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mv643xx_eth.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data ib62x0_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+void __init ib62x0_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_ge00_init(&ib62x0_ge00_data);
+}
diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c
new file mode 100644
index 00000000..c8ebde49
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-iconnect.c
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-kirkwood/board-iconnect.c
+ *
+ * Iomega i-connect Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/mv643xx_eth.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data iconnect_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(11),
+};
+
+void __init iconnect_init(void)
+{
+	kirkwood_ge00_init(&iconnect_ge00_data);
+}
+
+static int __init iconnect_pci_init(void)
+{
+	if (of_machine_is_compatible("iom,iconnect"))
+		kirkwood_pcie_init(KW_PCIE0);
+	return 0;
+}
+subsys_initcall(iconnect_pci_init);
diff --git a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
new file mode 100644
index 00000000..e5f70415
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
@@ -0,0 +1,34 @@
+/*
+ * arch/arm/mach-kirkwood/board-iomega_ix2_200.c
+ *
+ * Iomega StorCenter ix2-200
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = {
+	.phy_addr       = MV643XX_ETH_PHY_NONE,
+	.speed          = SPEED_1000,
+	.duplex         = DUPLEX_FULL,
+};
+
+static struct mv643xx_eth_platform_data iomega_ix2_200_ge01_data = {
+        .phy_addr       = MV643XX_ETH_PHY_ADDR(11),
+};
+
+void __init iomega_ix2_200_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_ge00_init(&iomega_ix2_200_ge00_data);
+	kirkwood_ge01_init(&iomega_ix2_200_ge01_data);
+}
diff --git a/arch/arm/mach-kirkwood/board-km_kirkwood.c b/arch/arm/mach-kirkwood/board-km_kirkwood.c
new file mode 100644
index 00000000..44e4605b
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-km_kirkwood.c
@@ -0,0 +1,44 @@
+/*
+ * Copyright 2012 2012 KEYMILE AG, CH-3097 Bern
+ * Valentin Longchamp <valentin.longchamp@keymile.com>
+ *
+ * arch/arm/mach-kirkwood/board-km_kirkwood.c
+ *
+ * Keymile km_kirkwood Reference Desing Init for drivers not converted to
+ * flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/clk.h>
+#include <linux/clk-private.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data km_kirkwood_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+void __init km_kirkwood_init(void)
+{
+	struct clk *sata_clk;
+	/*
+	 * Our variant of kirkwood (integrated in the Bobcat) hangs on accessing
+	 * SATA bits (14-15) of the Clock Gating Control Register. Since these
+	 * devices are also not present in this variant, their clocks get
+	 * disabled because unused when clk_disable_unused() gets called.
+	 * That's why we change the flags to these clocks to CLK_IGNORE_UNUSED
+	 */
+	sata_clk = clk_get_sys("sata_mv.0", "0");
+	if (!IS_ERR(sata_clk))
+		sata_clk->flags |= CLK_IGNORE_UNUSED;
+	sata_clk = clk_get_sys("sata_mv.0", "1");
+	if (!IS_ERR(sata_clk))
+		sata_clk->flags |= CLK_IGNORE_UNUSED;
+
+	kirkwood_ge00_init(&km_kirkwood_ge00_data);
+}
diff --git a/arch/arm/mach-kirkwood/board-lsxl.c b/arch/arm/mach-kirkwood/board-lsxl.c
new file mode 100644
index 00000000..4ec8b7ae
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-lsxl.c
@@ -0,0 +1,52 @@
+/*
+ * Copyright 2012 (C), Michael Walle <michael@walle.cc>
+ *
+ * arch/arm/mach-kirkwood/board-lsxl.c
+ *
+ * Buffalo Linkstation LS-XHL and LS-CHLv2 init for drivers not
+ * converted to flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mv643xx_eth.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data lsxl_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv643xx_eth_platform_data lsxl_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+/*
+ * On the LS-XHL/LS-CHLv2, the shutdown process is following:
+ * - Userland monitors key events until the power switch goes to off position
+ * - The board reboots
+ * - U-boot starts and goes into an idle mode waiting for the user
+ *   to move the switch to ON position
+ *
+ */
+static void lsxl_power_off(void)
+{
+	kirkwood_restart('h', NULL);
+}
+
+void __init lsxl_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+
+	kirkwood_ge00_init(&lsxl_ge00_data);
+	kirkwood_ge01_init(&lsxl_ge01_data);
+
+	/* register power-off method */
+	pm_power_off = lsxl_power_off;
+}
diff --git a/arch/arm/mach-kirkwood/board-mplcec4.c b/arch/arm/mach-kirkwood/board-mplcec4.c
new file mode 100644
index 00000000..7d6dc669
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-mplcec4.c
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2012 MPL AG, Switzerland
+ * Stefan Peter <s.peter@mpl.ch>
+ *
+ * arch/arm/mach-kirkwood/board-mplcec4.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mv643xx_eth.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data mplcec4_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(1),
+};
+
+static struct mv643xx_eth_platform_data mplcec4_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(2),
+};
+
+void __init mplcec4_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_ge00_init(&mplcec4_ge00_data);
+	kirkwood_ge01_init(&mplcec4_ge01_data);
+	kirkwood_pcie_init(KW_PCIE0);
+}
+
+
+
diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c
new file mode 100644
index 00000000..f8f66052
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-ns2.c
@@ -0,0 +1,35 @@
+/*
+ * Copyright 2012 (C), Simon Guinot <simon.guinot@sequanux.org>
+ *
+ * arch/arm/mach-kirkwood/board-ns2.c
+ *
+ * LaCie Network Space v2 board (and parents) initialization for drivers
+ * not converted to flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/of.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data ns2_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+void __init ns2_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	if (of_machine_is_compatible("lacie,cloudbox") ||
+	    of_machine_is_compatible("lacie,netspace_lite_v2") ||
+	    of_machine_is_compatible("lacie,netspace_mini_v2"))
+		ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
+	kirkwood_ge00_init(&ns2_ge00_data);
+}
diff --git a/arch/arm/mach-kirkwood/board-nsa310.c b/arch/arm/mach-kirkwood/board-nsa310.c
new file mode 100644
index 00000000..55ade93b
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-nsa310.c
@@ -0,0 +1,25 @@
+/*
+ * arch/arm/mach-kirkwood/nsa-310-setup.c
+ *
+ * ZyXEL NSA-310 Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <mach/kirkwood.h>
+#include <linux/of.h>
+#include "common.h"
+
+static int __init nsa310_pci_init(void)
+{
+	if (of_machine_is_compatible("zyxel,nsa310"))
+		kirkwood_pcie_init(KW_PCIE0);
+
+	return 0;
+}
+
+subsys_initcall(nsa310_pci_init);
diff --git a/arch/arm/mach-kirkwood/board-openblocks_a6.c b/arch/arm/mach-kirkwood/board-openblocks_a6.c
new file mode 100644
index 00000000..b11d8fde
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-openblocks_a6.c
@@ -0,0 +1,26 @@
+/*
+ * Copyright 2012 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * arch/arm/mach-kirkwood/board-openblocks_a6.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mv643xx_eth.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data openblocks_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+void __init openblocks_a6_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_ge00_init(&openblocks_ge00_data);
+}
diff --git a/arch/arm/mach-kirkwood/board-readynas.c b/arch/arm/mach-kirkwood/board-readynas.c
new file mode 100644
index 00000000..fb42c20e
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-readynas.c
@@ -0,0 +1,28 @@
+/*
+ * NETGEAR ReadyNAS Duo v2 Board setup for drivers not already
+ * converted to DT.
+ *
+ * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mv643xx_eth.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data netgear_readynas_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+void __init netgear_readynas_init(void)
+{
+	kirkwood_ge00_init(&netgear_readynas_ge00_data);
+	kirkwood_pcie_init(KW_PCIE0);
+}
diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c
new file mode 100644
index 00000000..4695d5f3
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-ts219.c
@@ -0,0 +1,43 @@
+/*
+ *
+ * QNAP TS-11x/TS-21x Turbo NAS Board Setup via DT
+ *
+ * Copyright (C) 2012 Andrew Lunn <andrew@lunn.ch>
+ *
+ * Based on the board file ts219-setup.c:
+ *
+ * Copyright (C) 2009  Martin Michlmayr <tbm@cyrius.com>
+ * Copyright (C) 2008  Byron Bradley <byron.bbradley@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "tsx1x-common.h"
+
+static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+void __init qnap_dt_ts219_init(void)
+{
+	u32 dev, rev;
+
+	kirkwood_pcie_id(&dev, &rev);
+	if (dev == MV88F6282_DEV_ID)
+		qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
+
+	kirkwood_ge00_init(&qnap_ts219_ge00_data);
+
+	pm_power_off = qnap_tsx1x_power_off;
+}
diff --git a/arch/arm/mach-kirkwood/board-usi_topkick.c b/arch/arm/mach-kirkwood/board-usi_topkick.c
new file mode 100644
index 00000000..1cc04ec3
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-usi_topkick.c
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
+ *
+ * arch/arm/mach-kirkwood/board-usi_topkick.c
+ *
+ * USI Topkick Init for drivers not converted to flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data topkick_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+void __init usi_topkick_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_ge00_init(&topkick_ge00_data);
+}
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
new file mode 100644
index 00000000..f3892289
--- /dev/null
+++ b/arch/arm/mach-kirkwood/common.c
@@ -0,0 +1,740 @@
+/*
+ * arch/arm/mach-kirkwood/common.c
+ *
+ * Core functions for Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/ata_platform.h>
+#include <linux/mtd/nand.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk-provider.h>
+#include <linux/spinlock.h>
+#include <linux/mv643xx_i2c.h>
+#include <linux/timex.h>
+#include <linux/kexec.h>
+#include <net/dsa.h>
+#include <asm/page.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
+#include <linux/platform_data/asoc-kirkwood.h>
+#include <plat/cache-feroceon-l2.h>
+#include <linux/platform_data/mmc-mvsdio.h>
+#include <linux/platform_data/mtd-orion_nand.h>
+#include <linux/platform_data/usb-ehci-orion.h>
+#include <plat/common.h>
+#include <plat/time.h>
+#include <linux/platform_data/dma-mv_xor.h>
+#include "common.h"
+
+/*****************************************************************************
+ * I/O Address Mapping
+ ****************************************************************************/
+static struct map_desc kirkwood_io_desc[] __initdata = {
+	{
+		.virtual	= (unsigned long) KIRKWOOD_REGS_VIRT_BASE,
+		.pfn		= __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE),
+		.length		= KIRKWOOD_REGS_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+void __init kirkwood_map_io(void)
+{
+	iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc));
+}
+
+/*****************************************************************************
+ * CLK tree
+ ****************************************************************************/
+
+static void enable_sata0(void)
+{
+	/* Enable PLL and IVREF */
+	writel(readl(SATA0_PHY_MODE_2) | 0xf, SATA0_PHY_MODE_2);
+	/* Enable PHY */
+	writel(readl(SATA0_IF_CTRL) & ~0x200, SATA0_IF_CTRL);
+}
+
+static void disable_sata0(void)
+{
+	/* Disable PLL and IVREF */
+	writel(readl(SATA0_PHY_MODE_2) & ~0xf, SATA0_PHY_MODE_2);
+	/* Disable PHY */
+	writel(readl(SATA0_IF_CTRL) | 0x200, SATA0_IF_CTRL);
+}
+
+static void enable_sata1(void)
+{
+	/* Enable PLL and IVREF */
+	writel(readl(SATA1_PHY_MODE_2) | 0xf, SATA1_PHY_MODE_2);
+	/* Enable PHY */
+	writel(readl(SATA1_IF_CTRL) & ~0x200, SATA1_IF_CTRL);
+}
+
+static void disable_sata1(void)
+{
+	/* Disable PLL and IVREF */
+	writel(readl(SATA1_PHY_MODE_2) & ~0xf, SATA1_PHY_MODE_2);
+	/* Disable PHY */
+	writel(readl(SATA1_IF_CTRL) | 0x200, SATA1_IF_CTRL);
+}
+
+static void disable_pcie0(void)
+{
+	writel(readl(PCIE_LINK_CTRL) | 0x10, PCIE_LINK_CTRL);
+	while (1)
+		if (readl(PCIE_STATUS) & 0x1)
+			break;
+	writel(readl(PCIE_LINK_CTRL) & ~0x10, PCIE_LINK_CTRL);
+}
+
+static void disable_pcie1(void)
+{
+	u32 dev, rev;
+
+	kirkwood_pcie_id(&dev, &rev);
+
+	if (dev == MV88F6282_DEV_ID) {
+		writel(readl(PCIE1_LINK_CTRL) | 0x10, PCIE1_LINK_CTRL);
+		while (1)
+			if (readl(PCIE1_STATUS) & 0x1)
+				break;
+		writel(readl(PCIE1_LINK_CTRL) & ~0x10, PCIE1_LINK_CTRL);
+	}
+}
+
+/* An extended version of the gated clk. This calls fn_en()/fn_dis
+ * before enabling/disabling the clock.  We use this to turn on/off
+ * PHYs etc.  */
+struct clk_gate_fn {
+	struct clk_gate gate;
+	void (*fn_en)(void);
+	void (*fn_dis)(void);
+};
+
+#define to_clk_gate_fn(_gate) container_of(_gate, struct clk_gate_fn, gate)
+#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
+
+static int clk_gate_fn_enable(struct clk_hw *hw)
+{
+	struct clk_gate *gate = to_clk_gate(hw);
+	struct clk_gate_fn *gate_fn = to_clk_gate_fn(gate);
+	int ret;
+
+	ret = clk_gate_ops.enable(hw);
+	if (!ret && gate_fn->fn_en)
+		gate_fn->fn_en();
+
+	return ret;
+}
+
+static void clk_gate_fn_disable(struct clk_hw *hw)
+{
+	struct clk_gate *gate = to_clk_gate(hw);
+	struct clk_gate_fn *gate_fn = to_clk_gate_fn(gate);
+
+	if (gate_fn->fn_dis)
+		gate_fn->fn_dis();
+
+	clk_gate_ops.disable(hw);
+}
+
+static struct clk_ops clk_gate_fn_ops;
+
+static struct clk __init *clk_register_gate_fn(struct device *dev,
+		const char *name,
+		const char *parent_name, unsigned long flags,
+		void __iomem *reg, u8 bit_idx,
+		u8 clk_gate_flags, spinlock_t *lock,
+		void (*fn_en)(void), void (*fn_dis)(void))
+{
+	struct clk_gate_fn *gate_fn;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	gate_fn = kzalloc(sizeof(struct clk_gate_fn), GFP_KERNEL);
+	if (!gate_fn) {
+		pr_err("%s: could not allocate gated clk\n", __func__);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	init.name = name;
+	init.ops = &clk_gate_fn_ops;
+	init.flags = flags;
+	init.parent_names = (parent_name ? &parent_name : NULL);
+	init.num_parents = (parent_name ? 1 : 0);
+
+	/* struct clk_gate assignments */
+	gate_fn->gate.reg = reg;
+	gate_fn->gate.bit_idx = bit_idx;
+	gate_fn->gate.flags = clk_gate_flags;
+	gate_fn->gate.lock = lock;
+	gate_fn->gate.hw.init = &init;
+	gate_fn->fn_en = fn_en;
+	gate_fn->fn_dis = fn_dis;
+
+	/* ops is the gate ops, but with our enable/disable functions */
+	if (clk_gate_fn_ops.enable != clk_gate_fn_enable ||
+	    clk_gate_fn_ops.disable != clk_gate_fn_disable) {
+		clk_gate_fn_ops = clk_gate_ops;
+		clk_gate_fn_ops.enable = clk_gate_fn_enable;
+		clk_gate_fn_ops.disable = clk_gate_fn_disable;
+	}
+
+	clk = clk_register(dev, &gate_fn->gate.hw);
+
+	if (IS_ERR(clk))
+		kfree(gate_fn);
+
+	return clk;
+}
+
+static DEFINE_SPINLOCK(gating_lock);
+static struct clk *tclk;
+
+static struct clk __init *kirkwood_register_gate(const char *name, u8 bit_idx)
+{
+	return clk_register_gate(NULL, name, "tclk", 0, CLOCK_GATING_CTRL,
+				 bit_idx, 0, &gating_lock);
+}
+
+static struct clk __init *kirkwood_register_gate_fn(const char *name,
+						    u8 bit_idx,
+						    void (*fn_en)(void),
+						    void (*fn_dis)(void))
+{
+	return clk_register_gate_fn(NULL, name, "tclk", 0, CLOCK_GATING_CTRL,
+				    bit_idx, 0, &gating_lock, fn_en, fn_dis);
+}
+
+static struct clk *ge0, *ge1;
+
+void __init kirkwood_clk_init(void)
+{
+	struct clk *runit, *sata0, *sata1, *usb0, *sdio;
+	struct clk *crypto, *xor0, *xor1, *pex0, *pex1, *audio;
+
+	tclk = clk_register_fixed_rate(NULL, "tclk", NULL,
+				       CLK_IS_ROOT, kirkwood_tclk);
+
+	runit = kirkwood_register_gate("runit",  CGC_BIT_RUNIT);
+	ge0 = kirkwood_register_gate("ge0",    CGC_BIT_GE0);
+	ge1 = kirkwood_register_gate("ge1",    CGC_BIT_GE1);
+	sata0 = kirkwood_register_gate_fn("sata0",  CGC_BIT_SATA0,
+					  enable_sata0, disable_sata0);
+	sata1 = kirkwood_register_gate_fn("sata1",  CGC_BIT_SATA1,
+					  enable_sata1, disable_sata1);
+	usb0 = kirkwood_register_gate("usb0",   CGC_BIT_USB0);
+	sdio = kirkwood_register_gate("sdio",   CGC_BIT_SDIO);
+	crypto = kirkwood_register_gate("crypto", CGC_BIT_CRYPTO);
+	xor0 = kirkwood_register_gate("xor0",   CGC_BIT_XOR0);
+	xor1 = kirkwood_register_gate("xor1",   CGC_BIT_XOR1);
+	pex0 = kirkwood_register_gate_fn("pex0",   CGC_BIT_PEX0,
+					 NULL, disable_pcie0);
+	pex1 = kirkwood_register_gate_fn("pex1",   CGC_BIT_PEX1,
+					 NULL, disable_pcie1);
+	audio = kirkwood_register_gate("audio",  CGC_BIT_AUDIO);
+	kirkwood_register_gate("tdm",    CGC_BIT_TDM);
+	kirkwood_register_gate("tsu",    CGC_BIT_TSU);
+
+	/* clkdev entries, mapping clks to devices */
+	orion_clkdev_add(NULL, "orion_spi.0", runit);
+	orion_clkdev_add(NULL, "orion_spi.1", runit);
+	orion_clkdev_add(NULL, MV643XX_ETH_NAME ".0", ge0);
+	orion_clkdev_add(NULL, MV643XX_ETH_NAME ".1", ge1);
+	orion_clkdev_add(NULL, "orion_wdt", tclk);
+	orion_clkdev_add("0", "sata_mv.0", sata0);
+	orion_clkdev_add("1", "sata_mv.0", sata1);
+	orion_clkdev_add(NULL, "orion-ehci.0", usb0);
+	orion_clkdev_add(NULL, "orion_nand", runit);
+	orion_clkdev_add(NULL, "mvsdio", sdio);
+	orion_clkdev_add(NULL, "mv_crypto", crypto);
+	orion_clkdev_add(NULL, MV_XOR_NAME ".0", xor0);
+	orion_clkdev_add(NULL, MV_XOR_NAME ".1", xor1);
+	orion_clkdev_add("0", "pcie", pex0);
+	orion_clkdev_add("1", "pcie", pex1);
+	orion_clkdev_add(NULL, "kirkwood-i2s", audio);
+	orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".0", runit);
+	orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".1", runit);
+
+	/* Marvell says runit is used by SPI, UART, NAND, TWSI, ...,
+	 * so should never be gated.
+	 */
+	clk_prepare_enable(runit);
+}
+
+/*****************************************************************************
+ * EHCI0
+ ****************************************************************************/
+void __init kirkwood_ehci_init(void)
+{
+	orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB, EHCI_PHY_NA);
+}
+
+
+/*****************************************************************************
+ * GE00
+ ****************************************************************************/
+void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
+{
+	orion_ge00_init(eth_data,
+			GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM,
+			IRQ_KIRKWOOD_GE00_ERR, 1600);
+	/* The interface forgets the MAC address assigned by u-boot if
+	the clock is turned off, so claim the clk now. */
+	clk_prepare_enable(ge0);
+}
+
+
+/*****************************************************************************
+ * GE01
+ ****************************************************************************/
+void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
+{
+	orion_ge01_init(eth_data,
+			GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM,
+			IRQ_KIRKWOOD_GE01_ERR, 1600);
+	clk_prepare_enable(ge1);
+}
+
+
+/*****************************************************************************
+ * Ethernet switch
+ ****************************************************************************/
+void __init kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq)
+{
+	orion_ge00_switch_init(d, irq);
+}
+
+
+/*****************************************************************************
+ * NAND flash
+ ****************************************************************************/
+static struct resource kirkwood_nand_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= KIRKWOOD_NAND_MEM_PHYS_BASE,
+	.end		= KIRKWOOD_NAND_MEM_PHYS_BASE +
+				KIRKWOOD_NAND_MEM_SIZE - 1,
+};
+
+static struct orion_nand_data kirkwood_nand_data = {
+	.cle		= 0,
+	.ale		= 1,
+	.width		= 8,
+};
+
+static struct platform_device kirkwood_nand_flash = {
+	.name		= "orion_nand",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &kirkwood_nand_data,
+	},
+	.resource	= &kirkwood_nand_resource,
+	.num_resources	= 1,
+};
+
+void __init kirkwood_nand_init(struct mtd_partition *parts, int nr_parts,
+			       int chip_delay)
+{
+	kirkwood_nand_data.parts = parts;
+	kirkwood_nand_data.nr_parts = nr_parts;
+	kirkwood_nand_data.chip_delay = chip_delay;
+	platform_device_register(&kirkwood_nand_flash);
+}
+
+void __init kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts,
+				   int (*dev_ready)(struct mtd_info *))
+{
+	kirkwood_nand_data.parts = parts;
+	kirkwood_nand_data.nr_parts = nr_parts;
+	kirkwood_nand_data.dev_ready = dev_ready;
+	platform_device_register(&kirkwood_nand_flash);
+}
+
+/*****************************************************************************
+ * SoC RTC
+ ****************************************************************************/
+static void __init kirkwood_rtc_init(void)
+{
+	orion_rtc_init(RTC_PHYS_BASE, IRQ_KIRKWOOD_RTC);
+}
+
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data)
+{
+	orion_sata_init(sata_data, SATA_PHYS_BASE, IRQ_KIRKWOOD_SATA);
+}
+
+
+/*****************************************************************************
+ * SD/SDIO/MMC
+ ****************************************************************************/
+static struct resource mvsdio_resources[] = {
+	[0] = {
+		.start	= SDIO_PHYS_BASE,
+		.end	= SDIO_PHYS_BASE + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_KIRKWOOD_SDIO,
+		.end	= IRQ_KIRKWOOD_SDIO,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 mvsdio_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device kirkwood_sdio = {
+	.name		= "mvsdio",
+	.id		= -1,
+	.dev		= {
+		.dma_mask = &mvsdio_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(mvsdio_resources),
+	.resource	= mvsdio_resources,
+};
+
+void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data)
+{
+	u32 dev, rev;
+
+	kirkwood_pcie_id(&dev, &rev);
+	if (rev == 0 && dev != MV88F6282_DEV_ID) /* catch all Kirkwood Z0's */
+		mvsdio_data->clock = 100000000;
+	else
+		mvsdio_data->clock = 200000000;
+	kirkwood_sdio.dev.platform_data = mvsdio_data;
+	platform_device_register(&kirkwood_sdio);
+}
+
+
+/*****************************************************************************
+ * SPI
+ ****************************************************************************/
+void __init kirkwood_spi_init(void)
+{
+	orion_spi_init(SPI_PHYS_BASE);
+}
+
+
+/*****************************************************************************
+ * I2C
+ ****************************************************************************/
+void __init kirkwood_i2c_init(void)
+{
+	orion_i2c_init(I2C_PHYS_BASE, IRQ_KIRKWOOD_TWSI, 8);
+}
+
+
+/*****************************************************************************
+ * UART0
+ ****************************************************************************/
+
+void __init kirkwood_uart0_init(void)
+{
+	orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE,
+			 IRQ_KIRKWOOD_UART_0, tclk);
+}
+
+
+/*****************************************************************************
+ * UART1
+ ****************************************************************************/
+void __init kirkwood_uart1_init(void)
+{
+	orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE,
+			 IRQ_KIRKWOOD_UART_1, tclk);
+}
+
+/*****************************************************************************
+ * Cryptographic Engines and Security Accelerator (CESA)
+ ****************************************************************************/
+void __init kirkwood_crypto_init(void)
+{
+	orion_crypto_init(CRYPTO_PHYS_BASE, KIRKWOOD_SRAM_PHYS_BASE,
+			  KIRKWOOD_SRAM_SIZE, IRQ_KIRKWOOD_CRYPTO);
+}
+
+
+/*****************************************************************************
+ * XOR0
+ ****************************************************************************/
+void __init kirkwood_xor0_init(void)
+{
+	orion_xor0_init(XOR0_PHYS_BASE, XOR0_HIGH_PHYS_BASE,
+			IRQ_KIRKWOOD_XOR_00, IRQ_KIRKWOOD_XOR_01);
+}
+
+
+/*****************************************************************************
+ * XOR1
+ ****************************************************************************/
+void __init kirkwood_xor1_init(void)
+{
+	orion_xor1_init(XOR1_PHYS_BASE, XOR1_HIGH_PHYS_BASE,
+			IRQ_KIRKWOOD_XOR_10, IRQ_KIRKWOOD_XOR_11);
+}
+
+
+/*****************************************************************************
+ * Watchdog
+ ****************************************************************************/
+void __init kirkwood_wdt_init(void)
+{
+	orion_wdt_init();
+}
+
+/*****************************************************************************
+ * CPU idle
+ ****************************************************************************/
+static struct resource kirkwood_cpuidle_resource[] = {
+	{
+		.flags	= IORESOURCE_MEM,
+		.start	= DDR_OPERATION_BASE,
+		.end	= DDR_OPERATION_BASE + 3,
+	},
+};
+
+static struct platform_device kirkwood_cpuidle = {
+	.name		= "kirkwood_cpuidle",
+	.id		= -1,
+	.resource	= kirkwood_cpuidle_resource,
+	.num_resources	= 1,
+};
+
+void __init kirkwood_cpuidle_init(void)
+{
+	platform_device_register(&kirkwood_cpuidle);
+}
+
+/*****************************************************************************
+ * Time handling
+ ****************************************************************************/
+void __init kirkwood_init_early(void)
+{
+	orion_time_set_base(TIMER_VIRT_BASE);
+
+	mvebu_mbus_init("marvell,kirkwood-mbus",
+			BRIDGE_WINS_BASE, BRIDGE_WINS_SZ,
+			DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ);
+}
+
+int kirkwood_tclk;
+
+static int __init kirkwood_find_tclk(void)
+{
+	u32 dev, rev;
+
+	kirkwood_pcie_id(&dev, &rev);
+
+	if (dev == MV88F6281_DEV_ID || dev == MV88F6282_DEV_ID)
+		if (((readl(SAMPLE_AT_RESET) >> 21) & 1) == 0)
+			return 200000000;
+
+	return 166666667;
+}
+
+void __init kirkwood_timer_init(void)
+{
+	kirkwood_tclk = kirkwood_find_tclk();
+
+	orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
+			IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
+}
+
+/*****************************************************************************
+ * Audio
+ ****************************************************************************/
+static struct resource kirkwood_i2s_resources[] = {
+	[0] = {
+		.start  = AUDIO_PHYS_BASE,
+		.end    = AUDIO_PHYS_BASE + SZ_16K - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ_KIRKWOOD_I2S,
+		.end    = IRQ_KIRKWOOD_I2S,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct kirkwood_asoc_platform_data kirkwood_i2s_data = {
+	.burst       = 128,
+};
+
+static struct platform_device kirkwood_i2s_device = {
+	.name		= "kirkwood-i2s",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(kirkwood_i2s_resources),
+	.resource	= kirkwood_i2s_resources,
+	.dev		= {
+		.platform_data	= &kirkwood_i2s_data,
+	},
+};
+
+static struct platform_device kirkwood_pcm_device = {
+	.name		= "kirkwood-pcm-audio",
+	.id		= -1,
+};
+
+void __init kirkwood_audio_init(void)
+{
+	platform_device_register(&kirkwood_i2s_device);
+	platform_device_register(&kirkwood_pcm_device);
+}
+
+/*****************************************************************************
+ * General
+ ****************************************************************************/
+/*
+ * Identify device ID and revision.
+ */
+char * __init kirkwood_id(void)
+{
+	u32 dev, rev;
+
+	kirkwood_pcie_id(&dev, &rev);
+
+	if (dev == MV88F6281_DEV_ID) {
+		if (rev == MV88F6281_REV_Z0)
+			return "MV88F6281-Z0";
+		else if (rev == MV88F6281_REV_A0)
+			return "MV88F6281-A0";
+		else if (rev == MV88F6281_REV_A1)
+			return "MV88F6281-A1";
+		else
+			return "MV88F6281-Rev-Unsupported";
+	} else if (dev == MV88F6192_DEV_ID) {
+		if (rev == MV88F6192_REV_Z0)
+			return "MV88F6192-Z0";
+		else if (rev == MV88F6192_REV_A0)
+			return "MV88F6192-A0";
+		else if (rev == MV88F6192_REV_A1)
+			return "MV88F6192-A1";
+		else
+			return "MV88F6192-Rev-Unsupported";
+	} else if (dev == MV88F6180_DEV_ID) {
+		if (rev == MV88F6180_REV_A0)
+			return "MV88F6180-Rev-A0";
+		else if (rev == MV88F6180_REV_A1)
+			return "MV88F6180-Rev-A1";
+		else
+			return "MV88F6180-Rev-Unsupported";
+	} else if (dev == MV88F6282_DEV_ID) {
+		if (rev == MV88F6282_REV_A0)
+			return "MV88F6282-Rev-A0";
+		else if (rev == MV88F6282_REV_A1)
+			return "MV88F6282-Rev-A1";
+		else
+			return "MV88F6282-Rev-Unsupported";
+	} else {
+		return "Device-Unknown";
+	}
+}
+
+void __init kirkwood_setup_wins(void)
+{
+	/*
+	 * The PCIe windows will no longer be statically allocated
+	 * here once Kirkwood is migrated to the pci-mvebu driver.
+	 */
+	mvebu_mbus_add_window_remap_flags("pcie0.0",
+					  KIRKWOOD_PCIE_IO_PHYS_BASE,
+					  KIRKWOOD_PCIE_IO_SIZE,
+					  KIRKWOOD_PCIE_IO_BUS_BASE,
+					  MVEBU_MBUS_PCI_IO);
+	mvebu_mbus_add_window_remap_flags("pcie0.0",
+					  KIRKWOOD_PCIE_MEM_PHYS_BASE,
+					  KIRKWOOD_PCIE_MEM_SIZE,
+					  MVEBU_MBUS_NO_REMAP,
+					  MVEBU_MBUS_PCI_MEM);
+	mvebu_mbus_add_window_remap_flags("pcie1.0",
+					  KIRKWOOD_PCIE1_IO_PHYS_BASE,
+					  KIRKWOOD_PCIE1_IO_SIZE,
+					  KIRKWOOD_PCIE1_IO_BUS_BASE,
+					  MVEBU_MBUS_PCI_IO);
+	mvebu_mbus_add_window_remap_flags("pcie1.0",
+					  KIRKWOOD_PCIE1_MEM_PHYS_BASE,
+					  KIRKWOOD_PCIE1_MEM_SIZE,
+					  MVEBU_MBUS_NO_REMAP,
+					  MVEBU_MBUS_PCI_MEM);
+	mvebu_mbus_add_window("nand", KIRKWOOD_NAND_MEM_PHYS_BASE,
+			      KIRKWOOD_NAND_MEM_SIZE);
+	mvebu_mbus_add_window("sram", KIRKWOOD_SRAM_PHYS_BASE,
+			      KIRKWOOD_SRAM_SIZE);
+}
+
+void __init kirkwood_l2_init(void)
+{
+#ifdef CONFIG_CACHE_FEROCEON_L2
+#ifdef CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH
+	writel(readl(L2_CONFIG_REG) | L2_WRITETHROUGH, L2_CONFIG_REG);
+	feroceon_l2_init(1);
+#else
+	writel(readl(L2_CONFIG_REG) & ~L2_WRITETHROUGH, L2_CONFIG_REG);
+	feroceon_l2_init(0);
+#endif
+#endif
+}
+
+void __init kirkwood_init(void)
+{
+	pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk);
+
+	/*
+	 * Disable propagation of mbus errors to the CPU local bus,
+	 * as this causes mbus errors (which can occur for example
+	 * for PCI aborts) to throw CPU aborts, which we're not set
+	 * up to deal with.
+	 */
+	writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
+
+	kirkwood_setup_wins();
+
+	kirkwood_l2_init();
+
+	/* Setup root of clk tree */
+	kirkwood_clk_init();
+
+	/* internal devices that every board has */
+	kirkwood_rtc_init();
+	kirkwood_wdt_init();
+	kirkwood_xor0_init();
+	kirkwood_xor1_init();
+	kirkwood_crypto_init();
+
+	kirkwood_cpuidle_init();
+#ifdef CONFIG_KEXEC
+	kexec_reinit = kirkwood_enable_pcie;
+#endif
+}
+
+void kirkwood_restart(char mode, const char *cmd)
+{
+	/*
+	 * Enable soft reset to assert RSTOUTn.
+	 */
+	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+	/*
+	 * Assert soft reset.
+	 */
+	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+	while (1)
+		;
+}
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
new file mode 100644
index 00000000..21da3b1e
--- /dev/null
+++ b/arch/arm/mach-kirkwood/common.h
@@ -0,0 +1,175 @@
+/*
+ * arch/arm/mach-kirkwood/common.h
+ *
+ * Core functions for Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ARCH_KIRKWOOD_COMMON_H
+#define __ARCH_KIRKWOOD_COMMON_H
+
+struct dsa_platform_data;
+struct mv643xx_eth_platform_data;
+struct mv_sata_platform_data;
+struct mvsdio_platform_data;
+struct mtd_partition;
+struct mtd_info;
+struct kirkwood_asoc_platform_data;
+
+#define KW_PCIE0	(1 << 0)
+#define KW_PCIE1	(1 << 1)
+
+/*
+ * Basic Kirkwood init functions used early by machine-setup.
+ */
+void kirkwood_map_io(void);
+void kirkwood_init(void);
+void kirkwood_init_early(void);
+void kirkwood_init_irq(void);
+
+void kirkwood_setup_wins(void);
+
+void kirkwood_enable_pcie(void);
+void kirkwood_pcie_id(u32 *dev, u32 *rev);
+
+void kirkwood_ehci_init(void);
+void kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data);
+void kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data);
+void kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq);
+void kirkwood_pcie_init(unsigned int portmask);
+void kirkwood_sata_init(struct mv_sata_platform_data *sata_data);
+void kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data);
+void kirkwood_spi_init(void);
+void kirkwood_i2c_init(void);
+void kirkwood_uart0_init(void);
+void kirkwood_uart1_init(void);
+void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay);
+void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts,
+			    int (*dev_ready)(struct mtd_info *));
+void kirkwood_audio_init(void);
+void kirkwood_cpuidle_init(void);
+void kirkwood_restart(char, const char *);
+void kirkwood_clk_init(void);
+
+/* board init functions for boards not fully converted to fdt */
+#ifdef CONFIG_MACH_DREAMPLUG_DT
+void dreamplug_init(void);
+#else
+static inline void dreamplug_init(void) {};
+#endif
+#ifdef CONFIG_MACH_GURUPLUG_DT
+void guruplug_dt_init(void);
+#else
+static inline void guruplug_dt_init(void) {};
+#endif
+#ifdef CONFIG_MACH_TS219_DT
+void qnap_dt_ts219_init(void);
+#else
+static inline void qnap_dt_ts219_init(void) {};
+#endif
+
+#ifdef CONFIG_MACH_DLINK_KIRKWOOD_DT
+void dnskw_init(void);
+#else
+static inline void dnskw_init(void) {};
+#endif
+
+#ifdef CONFIG_MACH_ICONNECT_DT
+void iconnect_init(void);
+#else
+static inline void iconnect_init(void) {};
+#endif
+
+#ifdef CONFIG_MACH_IB62X0_DT
+void ib62x0_init(void);
+#else
+static inline void ib62x0_init(void) {};
+#endif
+
+#ifdef CONFIG_MACH_DOCKSTAR_DT
+void dockstar_dt_init(void);
+#else
+static inline void dockstar_dt_init(void) {};
+#endif
+
+#ifdef CONFIG_MACH_GOFLEXNET_DT
+void goflexnet_init(void);
+#else
+static inline void goflexnet_init(void) {};
+#endif
+
+#ifdef CONFIG_MACH_LSXL_DT
+void lsxl_init(void);
+#else
+static inline void lsxl_init(void) {};
+#endif
+
+#ifdef CONFIG_MACH_IOMEGA_IX2_200_DT
+void iomega_ix2_200_init(void);
+#else
+static inline void iomega_ix2_200_init(void) {};
+#endif
+
+#ifdef CONFIG_MACH_KM_KIRKWOOD_DT
+void km_kirkwood_init(void);
+#else
+static inline void km_kirkwood_init(void) {};
+#endif
+
+#ifdef CONFIG_MACH_MPLCEC4_DT
+void mplcec4_init(void);
+#else
+static inline void mplcec4_init(void) {};
+#endif
+
+#if defined(CONFIG_MACH_INETSPACE_V2_DT) || \
+	defined(CONFIG_MACH_NETSPACE_V2_DT) || \
+	defined(CONFIG_MACH_NETSPACE_MAX_V2_DT) || \
+	defined(CONFIG_MACH_NETSPACE_LITE_V2_DT) || \
+	defined(CONFIG_MACH_NETSPACE_MINI_V2_DT)
+void ns2_init(void);
+#else
+static inline void ns2_init(void) {};
+#endif
+
+#ifdef CONFIG_MACH_OPENBLOCKS_A6_DT
+void openblocks_a6_init(void);
+#else
+static inline void openblocks_a6_init(void) {};
+#endif
+
+#ifdef CONFIG_MACH_READYNAS_DT
+void netgear_readynas_init(void);
+#else
+static inline void netgear_readynas_init(void) {};
+#endif
+
+#ifdef CONFIG_MACH_TOPKICK_DT
+void usi_topkick_init(void);
+#else
+static inline void usi_topkick_init(void) {};
+#endif
+
+#ifdef CONFIG_MACH_CLOUDBOX_DT
+void cloudbox_init(void);
+#else
+static inline void cloudbox_init(void) {};
+#endif
+
+/* early init functions not converted to fdt yet */
+char *kirkwood_id(void);
+void kirkwood_l2_init(void);
+void kirkwood_wdt_init(void);
+void kirkwood_xor0_init(void);
+void kirkwood_xor1_init(void);
+void kirkwood_crypto_init(void);
+
+extern int kirkwood_tclk;
+extern void kirkwood_timer_init(void);
+
+#define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
+
+#endif
diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c
new file mode 100644
index 00000000..45341806
--- /dev/null
+++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c
@@ -0,0 +1,231 @@
+/*
+ * arch/arm/mach-kirkwood/d2net_v2-setup.c
+ *
+ * LaCie d2 Network Space v2 Board Setup
+ *
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <linux/platform_data/leds-kirkwood-ns2.h>
+#include "common.h"
+#include "mpp.h"
+#include "lacie_v2-common.h"
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data d2net_v2_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+
+static struct mv_sata_platform_data d2net_v2_sata_data = {
+	.n_ports	= 2,
+};
+
+/*****************************************************************************
+ * GPIO keys
+ ****************************************************************************/
+
+#define D2NET_V2_GPIO_PUSH_BUTTON          34
+#define D2NET_V2_GPIO_POWER_SWITCH_ON      13
+#define D2NET_V2_GPIO_POWER_SWITCH_OFF     15
+
+#define D2NET_V2_SWITCH_POWER_ON           0x1
+#define D2NET_V2_SWITCH_POWER_OFF          0x2
+
+static struct gpio_keys_button d2net_v2_buttons[] = {
+	[0] = {
+		.type           = EV_SW,
+		.code           = D2NET_V2_SWITCH_POWER_ON,
+		.gpio           = D2NET_V2_GPIO_POWER_SWITCH_ON,
+		.desc           = "Back power switch (on|auto)",
+		.active_low     = 0,
+	},
+	[1] = {
+		.type           = EV_SW,
+		.code           = D2NET_V2_SWITCH_POWER_OFF,
+		.gpio           = D2NET_V2_GPIO_POWER_SWITCH_OFF,
+		.desc           = "Back power switch (auto|off)",
+		.active_low     = 0,
+	},
+	[2] = {
+		.code           = KEY_POWER,
+		.gpio           = D2NET_V2_GPIO_PUSH_BUTTON,
+		.desc           = "Front Push Button",
+		.active_low     = 1,
+	},
+};
+
+static struct gpio_keys_platform_data d2net_v2_button_data = {
+	.buttons	= d2net_v2_buttons,
+	.nbuttons	= ARRAY_SIZE(d2net_v2_buttons),
+};
+
+static struct platform_device d2net_v2_gpio_buttons = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &d2net_v2_button_data,
+	},
+};
+
+/*****************************************************************************
+ * GPIO LEDs
+ ****************************************************************************/
+
+#define D2NET_V2_GPIO_RED_LED		12
+
+static struct gpio_led d2net_v2_gpio_led_pins[] = {
+	{
+		.name	= "d2net_v2:red:fail",
+		.gpio	= D2NET_V2_GPIO_RED_LED,
+	},
+};
+
+static struct gpio_led_platform_data d2net_v2_gpio_leds_data = {
+	.num_leds	= ARRAY_SIZE(d2net_v2_gpio_led_pins),
+	.leds		= d2net_v2_gpio_led_pins,
+};
+
+static struct platform_device d2net_v2_gpio_leds = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &d2net_v2_gpio_leds_data,
+	},
+};
+
+/*****************************************************************************
+ * Dual-GPIO CPLD LEDs
+ ****************************************************************************/
+
+#define D2NET_V2_GPIO_BLUE_LED_SLOW	29
+#define D2NET_V2_GPIO_BLUE_LED_CMD	30
+
+static struct ns2_led d2net_v2_led_pins[] = {
+	{
+		.name	= "d2net_v2:blue:sata",
+		.cmd	= D2NET_V2_GPIO_BLUE_LED_CMD,
+		.slow	= D2NET_V2_GPIO_BLUE_LED_SLOW,
+	},
+};
+
+static struct ns2_led_platform_data d2net_v2_leds_data = {
+	.num_leds	= ARRAY_SIZE(d2net_v2_led_pins),
+	.leds		= d2net_v2_led_pins,
+};
+
+static struct platform_device d2net_v2_leds = {
+	.name		= "leds-ns2",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &d2net_v2_leds_data,
+	},
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static unsigned int d2net_v2_mpp_config[] __initdata = {
+	MPP0_SPI_SCn,
+	MPP1_SPI_MOSI,
+	MPP2_SPI_SCK,
+	MPP3_SPI_MISO,
+	MPP6_SYSRST_OUTn,
+	MPP7_GPO,		/* Request power-off */
+	MPP8_TW0_SDA,
+	MPP9_TW0_SCK,
+	MPP10_UART0_TXD,
+	MPP11_UART0_RXD,
+	MPP12_GPO,		/* Red led */
+	MPP13_GPIO,		/* Rear power switch (on|auto) */
+	MPP14_GPIO,		/* USB fuse */
+	MPP15_GPIO,		/* Rear power switch (auto|off) */
+	MPP16_GPIO,		/* SATA 0 power */
+	MPP21_SATA0_ACTn,
+	MPP24_GPIO,		/* USB mode select */
+	MPP26_GPIO,		/* USB device vbus */
+	MPP28_GPIO,		/* USB enable host vbus */
+	MPP29_GPIO,		/* Blue led (slow register) */
+	MPP30_GPIO,		/* Blue led (command register) */
+	MPP34_GPIO,		/* Power button (1 = Released, 0 = Pushed) */
+	MPP35_GPIO,		/* Inhibit power-off */
+	0
+};
+
+#define D2NET_V2_GPIO_POWER_OFF		7
+
+static void d2net_v2_power_off(void)
+{
+	gpio_set_value(D2NET_V2_GPIO_POWER_OFF, 1);
+}
+
+static void __init d2net_v2_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(d2net_v2_mpp_config);
+
+	lacie_v2_hdd_power_init(1);
+
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&d2net_v2_ge00_data);
+	kirkwood_sata_init(&d2net_v2_sata_data);
+	kirkwood_uart0_init();
+	lacie_v2_register_flash();
+	lacie_v2_register_i2c_devices();
+
+	platform_device_register(&d2net_v2_leds);
+	platform_device_register(&d2net_v2_gpio_leds);
+	platform_device_register(&d2net_v2_gpio_buttons);
+
+	if (gpio_request(D2NET_V2_GPIO_POWER_OFF, "power-off") == 0 &&
+	    gpio_direction_output(D2NET_V2_GPIO_POWER_OFF, 0) == 0)
+		pm_power_off = d2net_v2_power_off;
+	else
+		pr_err("d2net_v2: failed to configure power-off GPIO\n");
+}
+
+MACHINE_START(D2NET_V2, "LaCie d2 Network v2")
+	.atag_offset	= 0x100,
+	.init_machine	= d2net_v2_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.init_time	= kirkwood_timer_init,
+	.restart	= kirkwood_restart,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
new file mode 100644
index 00000000..5a369fe7
--- /dev/null
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -0,0 +1,108 @@
+/*
+ * arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+ *
+ * Marvell DB-88F6281-BP Development Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sizes.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <linux/platform_data/mmc-mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition db88f6281_nand_parts[] = {
+	{
+		.name = "u-boot",
+		.offset = 0,
+		.size = SZ_1M
+	}, {
+		.name = "uImage",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_4M
+	}, {
+		.name = "root",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL
+	},
+};
+
+static struct mv643xx_eth_platform_data db88f6281_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv_sata_platform_data db88f6281_sata_data = {
+	.n_ports	= 2,
+};
+
+static struct mvsdio_platform_data db88f6281_mvsdio_data = {
+	.gpio_write_protect	= 37,
+	.gpio_card_detect	= 38,
+};
+
+static unsigned int db88f6281_mpp_config[] __initdata = {
+	MPP0_NF_IO2,
+	MPP1_NF_IO3,
+	MPP2_NF_IO4,
+	MPP3_NF_IO5,
+	MPP4_NF_IO6,
+	MPP5_NF_IO7,
+	MPP18_NF_IO0,
+	MPP19_NF_IO1,
+	MPP37_GPIO,
+	MPP38_GPIO,
+	0
+};
+
+static void __init db88f6281_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(db88f6281_mpp_config);
+
+	kirkwood_nand_init(ARRAY_AND_SIZE(db88f6281_nand_parts), 25);
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&db88f6281_ge00_data);
+	kirkwood_sata_init(&db88f6281_sata_data);
+	kirkwood_uart0_init();
+	kirkwood_sdio_init(&db88f6281_mvsdio_data);
+}
+
+static int __init db88f6281_pci_init(void)
+{
+	if (machine_is_db88f6281_bp()) {
+		u32 dev, rev;
+
+		kirkwood_pcie_id(&dev, &rev);
+		if (dev == MV88F6282_DEV_ID)
+			kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
+		else
+			kirkwood_pcie_init(KW_PCIE0);
+	}
+	return 0;
+}
+subsys_initcall(db88f6281_pci_init);
+
+MACHINE_START(DB88F6281_BP, "Marvell DB-88F6281-BP Development Board")
+	/* Maintainer: Saeed Bishara <saeed@marvell.com> */
+	.atag_offset	= 0x100,
+	.init_machine	= db88f6281_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.init_time	= kirkwood_timer_init,
+	.restart	= kirkwood_restart,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c
new file mode 100644
index 00000000..060ccf9c
--- /dev/null
+++ b/arch/arm/mach-kirkwood/dockstar-setup.c
@@ -0,0 +1,111 @@
+/*
+ * arch/arm/mach-kirkwood/dockstar-setup.c
+ *
+ * Seagate FreeAgent DockStar Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition dockstar_nand_parts[] = {
+	{
+		.name = "u-boot",
+		.offset = 0,
+		.size = SZ_1M
+	}, {
+		.name = "uImage",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_4M
+	}, {
+		.name = "root",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL
+	},
+};
+
+static struct mv643xx_eth_platform_data dockstar_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct gpio_led dockstar_led_pins[] = {
+	{
+		.name			= "dockstar:green:health",
+		.default_trigger	= "default-on",
+		.gpio			= 46,
+		.active_low		= 1,
+	},
+	{
+		.name			= "dockstar:orange:misc",
+		.default_trigger	= "none",
+		.gpio			= 47,
+		.active_low		= 1,
+	},
+};
+
+static struct gpio_led_platform_data dockstar_led_data = {
+	.leds		= dockstar_led_pins,
+	.num_leds	= ARRAY_SIZE(dockstar_led_pins),
+};
+
+static struct platform_device dockstar_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &dockstar_led_data,
+	}
+};
+
+static unsigned int dockstar_mpp_config[] __initdata = {
+	MPP29_GPIO,	/* USB Power Enable */
+	MPP46_GPIO,	/* LED green */
+	MPP47_GPIO,	/* LED orange */
+	0
+};
+
+static void __init dockstar_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+
+	/* setup gpio pin select */
+	kirkwood_mpp_conf(dockstar_mpp_config);
+
+	kirkwood_uart0_init();
+	kirkwood_nand_init(ARRAY_AND_SIZE(dockstar_nand_parts), 25);
+
+	if (gpio_request(29, "USB Power Enable") != 0 ||
+	    gpio_direction_output(29, 1) != 0)
+		pr_err("can't set up GPIO 29 (USB Power Enable)\n");
+	kirkwood_ehci_init();
+
+	kirkwood_ge00_init(&dockstar_ge00_data);
+
+	platform_device_register(&dockstar_leds);
+}
+
+MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar")
+	.atag_offset	= 0x100,
+	.init_machine	= dockstar_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.init_time	= kirkwood_timer_init,
+	.restart	= kirkwood_restart,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c
new file mode 100644
index 00000000..08dd739a
--- /dev/null
+++ b/arch/arm/mach-kirkwood/guruplug-setup.c
@@ -0,0 +1,133 @@
+/*
+ * arch/arm/mach-kirkwood/guruplug-setup.c
+ *
+ * Marvell GuruPlug Reference Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <linux/platform_data/mmc-mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition guruplug_nand_parts[] = {
+	{
+		.name = "u-boot",
+		.offset = 0,
+		.size = SZ_1M
+	}, {
+		.name = "uImage",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_4M
+	}, {
+		.name = "root",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL
+	},
+};
+
+static struct mv643xx_eth_platform_data guruplug_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv643xx_eth_platform_data guruplug_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(1),
+};
+
+static struct mv_sata_platform_data guruplug_sata_data = {
+	.n_ports	= 1,
+};
+
+static struct mvsdio_platform_data guruplug_mvsdio_data = {
+	/* unfortunately the CD signal has not been connected */
+	.gpio_card_detect = -1,
+	.gpio_write_protect = -1,
+};
+
+static struct gpio_led guruplug_led_pins[] = {
+	{
+		.name			= "guruplug:red:health",
+		.gpio			= 46,
+		.active_low		= 1,
+	},
+	{
+		.name			= "guruplug:green:health",
+		.gpio			= 47,
+		.active_low		= 1,
+	},
+	{
+		.name			= "guruplug:red:wmode",
+		.gpio			= 48,
+		.active_low		= 1,
+	},
+	{
+		.name			= "guruplug:green:wmode",
+		.gpio			= 49,
+		.active_low		= 1,
+	},
+};
+
+static struct gpio_led_platform_data guruplug_led_data = {
+	.leds		= guruplug_led_pins,
+	.num_leds	= ARRAY_SIZE(guruplug_led_pins),
+};
+
+static struct platform_device guruplug_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &guruplug_led_data,
+	}
+};
+
+static unsigned int guruplug_mpp_config[] __initdata = {
+	MPP46_GPIO,	/* M_RLED */
+	MPP47_GPIO,	/* M_GLED */
+	MPP48_GPIO,	/* B_RLED */
+	MPP49_GPIO,	/* B_GLED */
+	0
+};
+
+static void __init guruplug_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(guruplug_mpp_config);
+
+	kirkwood_uart0_init();
+	kirkwood_nand_init(ARRAY_AND_SIZE(guruplug_nand_parts), 25);
+
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&guruplug_ge00_data);
+	kirkwood_ge01_init(&guruplug_ge01_data);
+	kirkwood_sata_init(&guruplug_sata_data);
+	kirkwood_sdio_init(&guruplug_mvsdio_data);
+
+	platform_device_register(&guruplug_leds);
+}
+
+MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board")
+	/* Maintainer: Siddarth Gore <gores@marvell.com> */
+	.atag_offset	= 0x100,
+	.init_machine	= guruplug_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.init_time	= kirkwood_timer_init,
+	.restart	= kirkwood_restart,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
new file mode 100644
index 00000000..5c82b7dc
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -0,0 +1,81 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+ *
+ * Mbus-L to Mbus Bridge Registers
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include <mach/kirkwood.h>
+
+#define CPU_CONFIG		(BRIDGE_VIRT_BASE + 0x0100)
+#define CPU_CONFIG_ERROR_PROP	0x00000004
+
+#define CPU_CONTROL		(BRIDGE_VIRT_BASE + 0x0104)
+#define CPU_RESET		0x00000002
+
+#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE + 0x0108)
+#define WDT_RESET_OUT_EN	0x00000002
+#define SOFT_RESET_OUT_EN	0x00000004
+
+#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE + 0x010c)
+#define SOFT_RESET		0x00000001
+
+#define BRIDGE_CAUSE		(BRIDGE_VIRT_BASE + 0x0110)
+#define WDT_INT_REQ		0x0008
+
+#define BRIDGE_INT_TIMER1_CLR	(~0x0004)
+
+#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE + 0x0200)
+#define IRQ_CAUSE_LOW_OFF	0x0000
+#define IRQ_MASK_LOW_OFF	0x0004
+#define IRQ_CAUSE_HIGH_OFF	0x0010
+#define IRQ_MASK_HIGH_OFF	0x0014
+
+#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE + 0x0300)
+#define TIMER_PHYS_BASE		(BRIDGE_PHYS_BASE + 0x0300)
+
+#define L2_CONFIG_REG		(BRIDGE_VIRT_BASE + 0x0128)
+#define L2_WRITETHROUGH		0x00000010
+
+#define CLOCK_GATING_CTRL	(BRIDGE_VIRT_BASE + 0x11c)
+#define CGC_BIT_GE0		(0)
+#define CGC_BIT_PEX0		(2)
+#define CGC_BIT_USB0		(3)
+#define CGC_BIT_SDIO		(4)
+#define CGC_BIT_TSU		(5)
+#define CGC_BIT_DUNIT		(6)
+#define CGC_BIT_RUNIT		(7)
+#define CGC_BIT_XOR0		(8)
+#define CGC_BIT_AUDIO		(9)
+#define CGC_BIT_SATA0		(14)
+#define CGC_BIT_SATA1		(15)
+#define CGC_BIT_XOR1		(16)
+#define CGC_BIT_CRYPTO		(17)
+#define CGC_BIT_PEX1		(18)
+#define CGC_BIT_GE1		(19)
+#define CGC_BIT_TDM		(20)
+#define CGC_GE0			(1 << 0)
+#define CGC_PEX0		(1 << 2)
+#define CGC_USB0		(1 << 3)
+#define CGC_SDIO		(1 << 4)
+#define CGC_TSU			(1 << 5)
+#define CGC_DUNIT		(1 << 6)
+#define CGC_RUNIT		(1 << 7)
+#define CGC_XOR0		(1 << 8)
+#define CGC_AUDIO		(1 << 9)
+#define CGC_SATA0		(1 << 14)
+#define CGC_SATA1		(1 << 15)
+#define CGC_XOR1		(1 << 16)
+#define CGC_CRYPTO		(1 << 17)
+#define CGC_PEX1		(1 << 18)
+#define CGC_GE1			(1 << 19)
+#define CGC_TDM			(1 << 20)
+#define CGC_RESERVED		(0x6 << 21)
+
+#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
new file mode 100644
index 00000000..f785d401
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/bridge-regs.h>
+
+	.macro	addruart, rp, rv, tmp
+	ldr	\rp, =KIRKWOOD_REGS_PHYS_BASE
+	ldr	\rv, =KIRKWOOD_REGS_VIRT_BASE
+	orr	\rp, \rp, #0x00012000
+	orr	\rv, \rv, #0x00012000
+	.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-kirkwood/include/mach/entry-macro.S b/arch/arm/mach-kirkwood/include/mach/entry-macro.S
new file mode 100644
index 00000000..82db29f7
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/entry-macro.S
@@ -0,0 +1,34 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Marvell Kirkwood platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/bridge-regs.h>
+
+	.macro  get_irqnr_preamble, base, tmp
+	ldr	\base, =IRQ_VIRT_BASE
+	.endm
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	@ check low interrupts
+	ldr	\irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
+	ldr	\tmp, [\base, #IRQ_MASK_LOW_OFF]
+	mov	\irqnr, #31
+	ands	\irqstat, \irqstat, \tmp
+	bne	1001f
+
+	@ if no low interrupts set, check high interrupts
+	ldr	\irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
+	ldr	\tmp, [\base, #IRQ_MASK_HIGH_OFF]
+	mov	\irqnr, #63
+	ands	\irqstat, \irqstat, \tmp
+
+	@ find first active interrupt source
+1001:	clzne	\irqstat, \irqstat
+	subne	\irqnr, \irqnr, \irqstat
+	.endm
diff --git a/arch/arm/mach-kirkwood/include/mach/hardware.h b/arch/arm/mach-kirkwood/include/mach/hardware.h
new file mode 100644
index 00000000..742b74f4
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/hardware.h
@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/hardware.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "kirkwood.h"
+
+#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/irqs.h b/arch/arm/mach-kirkwood/include/mach/irqs.h
new file mode 100644
index 00000000..2bf8161e
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/irqs.h
@@ -0,0 +1,65 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/irqs.h
+ *
+ * IRQ definitions for Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+/*
+ * Low Interrupt Controller
+ */
+#define IRQ_KIRKWOOD_HIGH_SUM	0
+#define IRQ_KIRKWOOD_BRIDGE	1
+#define IRQ_KIRKWOOD_HOST2CPU	2
+#define IRQ_KIRKWOOD_CPU2HOST	3
+#define IRQ_KIRKWOOD_XOR_00	5
+#define IRQ_KIRKWOOD_XOR_01	6
+#define IRQ_KIRKWOOD_XOR_10	7
+#define IRQ_KIRKWOOD_XOR_11	8
+#define IRQ_KIRKWOOD_PCIE	9
+#define IRQ_KIRKWOOD_PCIE1	10
+#define IRQ_KIRKWOOD_GE00_SUM	11
+#define IRQ_KIRKWOOD_GE01_SUM	15
+#define IRQ_KIRKWOOD_USB	19
+#define IRQ_KIRKWOOD_SATA	21
+#define IRQ_KIRKWOOD_CRYPTO	22
+#define IRQ_KIRKWOOD_SPI	23
+#define IRQ_KIRKWOOD_I2S	24
+#define IRQ_KIRKWOOD_TS_0	26
+#define IRQ_KIRKWOOD_SDIO	28
+#define IRQ_KIRKWOOD_TWSI	29
+#define IRQ_KIRKWOOD_AVB	30
+#define IRQ_KIRKWOOD_TDMI	31
+
+/*
+ * High Interrupt Controller
+ */
+#define IRQ_KIRKWOOD_UART_0	33
+#define IRQ_KIRKWOOD_UART_1	34
+#define IRQ_KIRKWOOD_GPIO_LOW_0_7	35
+#define IRQ_KIRKWOOD_GPIO_LOW_8_15	36
+#define IRQ_KIRKWOOD_GPIO_LOW_16_23	37
+#define IRQ_KIRKWOOD_GPIO_LOW_24_31	38
+#define IRQ_KIRKWOOD_GPIO_HIGH_0_7	39
+#define IRQ_KIRKWOOD_GPIO_HIGH_8_15	40
+#define IRQ_KIRKWOOD_GPIO_HIGH_16_23	41
+#define IRQ_KIRKWOOD_GE00_ERR	46
+#define IRQ_KIRKWOOD_GE01_ERR	47
+#define IRQ_KIRKWOOD_RTC        53
+
+/*
+ * KIRKWOOD General Purpose Pins
+ */
+#define IRQ_KIRKWOOD_GPIO_START	64
+#define NR_GPIO_IRQS		50
+
+#define NR_IRQS			(IRQ_KIRKWOOD_GPIO_START + NR_GPIO_IRQS)
+
+
+#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
new file mode 100644
index 00000000..92976cef
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -0,0 +1,142 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/kirkwood.h
+ *
+ * Generic definitions for Marvell Kirkwood SoC flavors:
+ *  88F6180, 88F6192 and 88F6281.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_KIRKWOOD_H
+#define __ASM_ARCH_KIRKWOOD_H
+
+/*
+ * Marvell Kirkwood address maps.
+ *
+ * phys
+ * e0000000	PCIe #0 Memory space
+ * e8000000	PCIe #1 Memory space
+ * f1000000	on-chip peripheral registers
+ * f2000000	PCIe #0 I/O space
+ * f3000000	PCIe #1 I/O space
+ * f4000000	NAND controller address window
+ * f5000000	Security Accelerator SRAM
+ *
+ * virt		phys		size
+ * fed00000	f1000000	1M	on-chip peripheral registers
+ * fee00000	f2000000	1M	PCIe #0 I/O space
+ * fef00000	f3000000	1M	PCIe #1 I/O space
+ */
+
+#define KIRKWOOD_SRAM_PHYS_BASE		0xf5000000
+#define KIRKWOOD_SRAM_SIZE		SZ_2K
+
+#define KIRKWOOD_NAND_MEM_PHYS_BASE	0xf4000000
+#define KIRKWOOD_NAND_MEM_SIZE		SZ_1K
+
+#define KIRKWOOD_PCIE1_IO_PHYS_BASE	0xf3000000
+#define KIRKWOOD_PCIE1_IO_BUS_BASE	0x00010000
+#define KIRKWOOD_PCIE1_IO_SIZE		SZ_64K
+
+#define KIRKWOOD_PCIE_IO_PHYS_BASE	0xf2000000
+#define KIRKWOOD_PCIE_IO_BUS_BASE	0x00000000
+#define KIRKWOOD_PCIE_IO_SIZE		SZ_64K
+
+#define KIRKWOOD_REGS_PHYS_BASE		0xf1000000
+#define KIRKWOOD_REGS_VIRT_BASE		IOMEM(0xfed00000)
+#define KIRKWOOD_REGS_SIZE		SZ_1M
+
+#define KIRKWOOD_PCIE_MEM_PHYS_BASE	0xe0000000
+#define KIRKWOOD_PCIE_MEM_BUS_BASE	0xe0000000
+#define KIRKWOOD_PCIE_MEM_SIZE		SZ_128M
+
+#define KIRKWOOD_PCIE1_MEM_PHYS_BASE	0xe8000000
+#define KIRKWOOD_PCIE1_MEM_BUS_BASE	0xe8000000
+#define KIRKWOOD_PCIE1_MEM_SIZE		SZ_128M
+
+/*
+ * Register Map
+ */
+#define DDR_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE + 0x00000)
+#define DDR_PHYS_BASE           (KIRKWOOD_REGS_PHYS_BASE + 0x00000)
+#define  DDR_WINDOW_CPU_BASE    (DDR_PHYS_BASE + 0x1500)
+#define  DDR_WINDOW_CPU_SZ      (0x20)
+#define DDR_OPERATION_BASE	(DDR_PHYS_BASE + 0x1418)
+
+#define DEV_BUS_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE + 0x10000)
+#define DEV_BUS_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE + 0x10000)
+#define  SAMPLE_AT_RESET	(DEV_BUS_VIRT_BASE + 0x0030)
+#define  DEVICE_ID		(DEV_BUS_VIRT_BASE + 0x0034)
+#define  GPIO_LOW_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x0100)
+#define  GPIO_HIGH_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x0140)
+#define  RTC_PHYS_BASE		(DEV_BUS_PHYS_BASE + 0x0300)
+#define  SPI_PHYS_BASE		(DEV_BUS_PHYS_BASE + 0x0600)
+#define  I2C_PHYS_BASE		(DEV_BUS_PHYS_BASE + 0x1000)
+#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x2000)
+#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x2000)
+#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x2100)
+#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x2100)
+
+#define BRIDGE_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE + 0x20000)
+#define BRIDGE_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE + 0x20000)
+#define  BRIDGE_WINS_BASE       (BRIDGE_PHYS_BASE)
+#define  BRIDGE_WINS_SZ         (0x80)
+
+#define CRYPTO_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE + 0x30000)
+
+#define PCIE_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE + 0x40000)
+#define PCIE_LINK_CTRL		(PCIE_VIRT_BASE + 0x70)
+#define PCIE_STATUS		(PCIE_VIRT_BASE + 0x1a04)
+#define PCIE1_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE + 0x44000)
+#define PCIE1_LINK_CTRL		(PCIE1_VIRT_BASE + 0x70)
+#define PCIE1_STATUS		(PCIE1_VIRT_BASE + 0x1a04)
+
+#define USB_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0x50000)
+
+#define XOR0_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0x60800)
+#define XOR0_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE + 0x60800)
+#define XOR1_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0x60900)
+#define XOR1_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE + 0x60900)
+#define XOR0_HIGH_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE + 0x60A00)
+#define XOR0_HIGH_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE + 0x60A00)
+#define XOR1_HIGH_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE + 0x60B00)
+#define XOR1_HIGH_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE + 0x60B00)
+
+#define GE00_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0x70000)
+#define GE01_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0x74000)
+
+#define SATA_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0x80000)
+#define SATA_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE + 0x80000)
+#define SATA0_IF_CTRL		(SATA_VIRT_BASE + 0x2050)
+#define SATA0_PHY_MODE_2	(SATA_VIRT_BASE + 0x2330)
+#define SATA1_IF_CTRL		(SATA_VIRT_BASE + 0x4050)
+#define SATA1_PHY_MODE_2	(SATA_VIRT_BASE + 0x4330)
+
+#define SDIO_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0x90000)
+
+#define AUDIO_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0xA0000)
+#define AUDIO_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE + 0xA0000)
+
+/*
+ * Supported devices and revisions.
+ */
+#define MV88F6281_DEV_ID	0x6281
+#define MV88F6281_REV_Z0	0
+#define MV88F6281_REV_A0	2
+#define MV88F6281_REV_A1	3
+
+#define MV88F6192_DEV_ID	0x6192
+#define MV88F6192_REV_Z0	0
+#define MV88F6192_REV_A0	2
+#define MV88F6192_REV_A1	3
+
+#define MV88F6180_DEV_ID	0x6180
+#define MV88F6180_REV_A0	2
+#define MV88F6180_REV_A1	3
+
+#define MV88F6282_DEV_ID	0x6282
+#define MV88F6282_REV_A0	0
+#define MV88F6282_REV_A1	1
+#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/timex.h b/arch/arm/mach-kirkwood/include/mach/timex.h
new file mode 100644
index 00000000..c923cd16
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/timex.h
@@ -0,0 +1,10 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/timex.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE		(100 * HZ)
+
diff --git a/arch/arm/mach-kirkwood/include/mach/uncompress.h b/arch/arm/mach-kirkwood/include/mach/uncompress.h
new file mode 100644
index 00000000..5bca5534
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/uncompress.h
@@ -0,0 +1,46 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/uncompress.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/serial_reg.h>
+#include <mach/kirkwood.h>
+
+#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
+
+static void putc(const char c)
+{
+	unsigned char *base = SERIAL_BASE;
+	int i;
+
+	for (i = 0; i < 0x1000; i++) {
+		if (base[UART_LSR << 2] & UART_LSR_THRE)
+			break;
+		barrier();
+	}
+
+	base[UART_TX << 2] = c;
+}
+
+static void flush(void)
+{
+	unsigned char *base = SERIAL_BASE;
+	unsigned char mask;
+	int i;
+
+	mask = UART_LSR_TEMT | UART_LSR_THRE;
+
+	for (i = 0; i < 0x1000; i++) {
+		if ((base[UART_LSR << 2] & mask) == mask)
+			break;
+		barrier();
+	}
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c
new file mode 100644
index 00000000..2a97a2e4
--- /dev/null
+++ b/arch/arm/mach-kirkwood/irq.c
@@ -0,0 +1,45 @@
+/*
+ * arch/arm/mach-kirkwood/irq.c
+ *
+ * Kirkwood IRQ handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <mach/bridge-regs.h>
+#include <plat/orion-gpio.h>
+#include <plat/irq.h>
+#include "common.h"
+
+static int __initdata gpio0_irqs[4] = {
+	IRQ_KIRKWOOD_GPIO_LOW_0_7,
+	IRQ_KIRKWOOD_GPIO_LOW_8_15,
+	IRQ_KIRKWOOD_GPIO_LOW_16_23,
+	IRQ_KIRKWOOD_GPIO_LOW_24_31,
+};
+
+static int __initdata gpio1_irqs[4] = {
+	IRQ_KIRKWOOD_GPIO_HIGH_0_7,
+	IRQ_KIRKWOOD_GPIO_HIGH_8_15,
+	IRQ_KIRKWOOD_GPIO_HIGH_16_23,
+	0,
+};
+
+void __init kirkwood_init_irq(void)
+{
+	orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
+	orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
+
+	/*
+	 * Initialize gpiolib for GPIOs 0-49.
+	 */
+	orion_gpio_init(NULL, 0, 32, GPIO_LOW_VIRT_BASE, 0,
+			IRQ_KIRKWOOD_GPIO_START, gpio0_irqs);
+	orion_gpio_init(NULL, 32, 18, GPIO_HIGH_VIRT_BASE, 0,
+			IRQ_KIRKWOOD_GPIO_START + 32, gpio1_irqs);
+}
diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.c b/arch/arm/mach-kirkwood/lacie_v2-common.c
new file mode 100644
index 00000000..48949597
--- /dev/null
+++ b/arch/arm/mach-kirkwood/lacie_v2-common.c
@@ -0,0 +1,114 @@
+/*
+ * arch/arm/mach-kirkwood/lacie_v2-common.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/gpio.h>
+#include <asm/mach/time.h>
+#include <mach/kirkwood.h>
+#include <mach/irqs.h>
+#include <plat/time.h>
+#include "common.h"
+#include "lacie_v2-common.h"
+
+/*****************************************************************************
+ * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005)
+ ****************************************************************************/
+
+static struct mtd_partition lacie_v2_flash_parts[] = {
+	{
+		.name = "u-boot",
+		.size = MTDPART_SIZ_FULL,
+		.offset = 0,
+		.mask_flags = MTD_WRITEABLE, /* force read-only */
+	},
+};
+
+static const struct flash_platform_data lacie_v2_flash = {
+	.type		= "mx25l4005a",
+	.name		= "spi_flash",
+	.parts		= lacie_v2_flash_parts,
+	.nr_parts	= ARRAY_SIZE(lacie_v2_flash_parts),
+};
+
+static struct spi_board_info __initdata lacie_v2_spi_slave_info[] = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &lacie_v2_flash,
+		.irq		= -1,
+		.max_speed_hz	= 20000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+	},
+};
+
+void __init lacie_v2_register_flash(void)
+{
+	spi_register_board_info(lacie_v2_spi_slave_info,
+				ARRAY_SIZE(lacie_v2_spi_slave_info));
+	kirkwood_spi_init();
+}
+
+/*****************************************************************************
+ * I2C devices
+ ****************************************************************************/
+
+static struct at24_platform_data at24c04 = {
+	.byte_len	= SZ_4K / 8,
+	.page_size	= 16,
+};
+
+/*
+ * i2c addr | chip         | description
+ * 0x50     | HT24LC04     | eeprom (512B)
+ */
+
+static struct i2c_board_info __initdata lacie_v2_i2c_info[] = {
+	{
+		I2C_BOARD_INFO("24c04", 0x50),
+		.platform_data  = &at24c04,
+	}
+};
+
+void __init lacie_v2_register_i2c_devices(void)
+{
+	kirkwood_i2c_init();
+	i2c_register_board_info(0, lacie_v2_i2c_info,
+				ARRAY_SIZE(lacie_v2_i2c_info));
+}
+
+/*****************************************************************************
+ * Hard Disk power
+ ****************************************************************************/
+
+static int __initdata lacie_v2_gpio_hdd_power[] = { 16, 17, 41, 42, 43 };
+
+void __init lacie_v2_hdd_power_init(int hdd_num)
+{
+	int i;
+	int err;
+
+	/* Power up all hard disks. */
+	for (i = 0; i < hdd_num; i++) {
+		err = gpio_request(lacie_v2_gpio_hdd_power[i], NULL);
+		if (err == 0) {
+			err = gpio_direction_output(
+					lacie_v2_gpio_hdd_power[i], 1);
+			/* Free the HDD power GPIOs. This allow user-space to
+			 * configure them via the gpiolib sysfs interface. */
+			gpio_free(lacie_v2_gpio_hdd_power[i]);
+		}
+		if (err)
+			pr_err("Failed to power up HDD%d\n", i + 1);
+	}
+}
diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.h b/arch/arm/mach-kirkwood/lacie_v2-common.h
new file mode 100644
index 00000000..fc64f578
--- /dev/null
+++ b/arch/arm/mach-kirkwood/lacie_v2-common.h
@@ -0,0 +1,16 @@
+/*
+ * arch/arm/mach-kirkwood/lacie_v2-common.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ARCH_KIRKWOOD_LACIE_V2_COMMON_H
+#define __ARCH_KIRKWOOD_LACIE_V2_COMMON_H
+
+void lacie_v2_register_flash(void);
+void lacie_v2_register_i2c_devices(void);
+void lacie_v2_hdd_power_init(int hdd_num);
+
+#endif
diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c
new file mode 100644
index 00000000..e96fd71a
--- /dev/null
+++ b/arch/arm/mach-kirkwood/mpp.c
@@ -0,0 +1,43 @@
+/*
+ * arch/arm/mach-kirkwood/mpp.c
+ *
+ * MPP functions for Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <plat/mpp.h>
+#include "common.h"
+#include "mpp.h"
+
+static unsigned int __init kirkwood_variant(void)
+{
+	u32 dev, rev;
+
+	kirkwood_pcie_id(&dev, &rev);
+
+	if (dev == MV88F6281_DEV_ID && rev >= MV88F6281_REV_A0)
+		return MPP_F6281_MASK;
+	if (dev == MV88F6282_DEV_ID)
+		return MPP_F6282_MASK;
+	if (dev == MV88F6192_DEV_ID && rev >= MV88F6192_REV_A0)
+		return MPP_F6192_MASK;
+	if (dev == MV88F6180_DEV_ID)
+		return MPP_F6180_MASK;
+
+	pr_err("MPP setup: unknown kirkwood variant (dev %#x rev %#x)\n",
+	       dev, rev);
+	return 0;
+}
+
+void __init kirkwood_mpp_conf(unsigned int *mpp_list)
+{
+	orion_mpp_conf(mpp_list, kirkwood_variant(),
+		       MPP_MAX, DEV_BUS_VIRT_BASE);
+}
diff --git a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h
new file mode 100644
index 00000000..d5a0d1da
--- /dev/null
+++ b/arch/arm/mach-kirkwood/mpp.h
@@ -0,0 +1,348 @@
+/*
+ * linux/arch/arm/mach-kirkwood/mpp.h -- Multi Purpose Pins
+ *
+ * Copyright 2009: Marvell Technology Group Ltd.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __KIRKWOOD_MPP_H
+#define __KIRKWOOD_MPP_H
+
+#define MPP(_num, _sel, _in, _out, _F6180, _F6190, _F6192, _F6281, _F6282) ( \
+	/* MPP number */		((_num) & 0xff) | \
+	/* MPP select value */		(((_sel) & 0xf) << 8) | \
+	/* may be input signal */	((!!(_in)) << 12) | \
+	/* may be output signal */	((!!(_out)) << 13) | \
+	/* available on F6180 */	((!!(_F6180)) << 14) | \
+	/* available on F6190 */	((!!(_F6190)) << 15) | \
+	/* available on F6192 */	((!!(_F6192)) << 16) | \
+	/* available on F6281 */	((!!(_F6281)) << 17) | \
+	/* available on F6282 */	((!!(_F6282)) << 18))
+
+				/*   num sel  i  o  6180 6190 6192 6281 6282 */
+
+#define MPP_F6180_MASK		MPP(  0, 0x0, 0, 0, 1,   0,   0,   0,   0 )
+#define MPP_F6190_MASK		MPP(  0, 0x0, 0, 0, 0,   1,   0,   0,   0 )
+#define MPP_F6192_MASK		MPP(  0, 0x0, 0, 0, 0,   0,   1,   0,   0 )
+#define MPP_F6281_MASK		MPP(  0, 0x0, 0, 0, 0,   0,   0,   1,   0 )
+#define MPP_F6282_MASK		MPP(  0, 0x0, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP0_GPIO		MPP(  0, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP0_NF_IO2		MPP(  0, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP0_SPI_SCn		MPP(  0, 0x2, 0, 0, 1,   1,   1,   1,   1 )
+
+#define MPP1_GPO		MPP(  1, 0x0, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP1_NF_IO3		MPP(  1, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP1_SPI_MOSI		MPP(  1, 0x2, 0, 0, 1,   1,   1,   1,   1 )
+
+#define MPP2_GPO		MPP(  2, 0x0, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP2_NF_IO4		MPP(  2, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP2_SPI_SCK		MPP(  2, 0x2, 0, 0, 1,   1,   1,   1,   1 )
+
+#define MPP3_GPO		MPP(  3, 0x0, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP3_NF_IO5		MPP(  3, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP3_SPI_MISO		MPP(  3, 0x2, 0, 0, 1,   1,   1,   1,   1 )
+
+#define MPP4_GPIO		MPP(  4, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP4_NF_IO6		MPP(  4, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP4_UART0_RXD		MPP(  4, 0x2, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP4_SATA1_ACTn		MPP(  4, 0x5, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP4_LCD_VGA_HSYNC	MPP(  4, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+#define MPP4_PTP_CLK		MPP(  4, 0xd, 0, 0, 1,   1,   1,   1,   0 )
+
+#define MPP5_GPO		MPP(  5, 0x0, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP5_NF_IO7		MPP(  5, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP5_UART0_TXD		MPP(  5, 0x2, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP5_PTP_TRIG_GEN	MPP(  5, 0x4, 0, 0, 1,   1,   1,   1,   0 )
+#define MPP5_SATA0_ACTn		MPP(  5, 0x5, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP5_LCD_VGA_VSYNC	MPP(  5, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP6_SYSRST_OUTn	MPP(  6, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP6_SPI_MOSI		MPP(  6, 0x2, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP6_PTP_TRIG_GEN	MPP(  6, 0x3, 0, 0, 1,   1,   1,   1,   0 )
+
+#define MPP7_GPO		MPP(  7, 0x0, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP7_PEX_RST_OUTn	MPP(  7, 0x1, 0, 0, 1,   1,   1,   1,   0 )
+#define MPP7_SPI_SCn		MPP(  7, 0x2, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP7_PTP_TRIG_GEN	MPP(  7, 0x3, 0, 0, 1,   1,   1,   1,   0 )
+#define MPP7_LCD_PWM		MPP(  7, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP8_GPIO		MPP(  8, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP8_TW0_SDA		MPP(  8, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP8_UART0_RTS		MPP(  8, 0x2, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP8_UART1_RTS		MPP(  8, 0x3, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP8_MII0_RXERR		MPP(  8, 0x4, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP8_SATA1_PRESENTn	MPP(  8, 0x5, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP8_PTP_CLK		MPP(  8, 0xc, 0, 0, 1,   1,   1,   1,   0 )
+#define MPP8_MII0_COL		MPP(  8, 0xd, 0, 0, 1,   1,   1,   1,   1 )
+
+#define MPP9_GPIO		MPP(  9, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP9_TW0_SCK		MPP(  9, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP9_UART0_CTS		MPP(  9, 0x2, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP9_UART1_CTS		MPP(  9, 0x3, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP9_SATA0_PRESENTn	MPP(  9, 0x5, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP9_PTP_EVENT_REQ	MPP(  9, 0xc, 0, 0, 1,   1,   1,   1,   0 )
+#define MPP9_MII0_CRS		MPP(  9, 0xd, 0, 0, 1,   1,   1,   1,   1 )
+
+#define MPP10_GPO		MPP( 10, 0x0, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP10_SPI_SCK		MPP( 10, 0x2, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP10_UART0_TXD		MPP( 10, 0X3, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP10_SATA1_ACTn	MPP( 10, 0x5, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP10_PTP_TRIG_GEN	MPP( 10, 0xc, 0, 0, 1,   1,   1,   1,   0 )
+
+#define MPP11_GPIO		MPP( 11, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP11_SPI_MISO		MPP( 11, 0x2, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP11_UART0_RXD		MPP( 11, 0x3, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP11_PTP_EVENT_REQ	MPP( 11, 0x4, 0, 0, 1,   1,   1,   1,   0 )
+#define MPP11_PTP_TRIG_GEN	MPP( 11, 0xc, 0, 0, 1,   1,   1,   1,   0 )
+#define MPP11_PTP_CLK		MPP( 11, 0xd, 0, 0, 1,   1,   1,   1,   0 )
+#define MPP11_SATA0_ACTn	MPP( 11, 0x5, 0, 0, 0,   1,   1,   1,   1 )
+
+#define MPP12_GPO		MPP( 12, 0x0, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP12_GPIO		MPP( 12, 0x0, 1, 1, 0,   0,   0,   1,   0 )
+#define MPP12_SD_CLK		MPP( 12, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP12_AU_SPDIF0		MPP( 12, 0xa, 0, 0, 0,   0,   0,   0,   1 )
+#define MPP12_SPI_MOSI		MPP( 12, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+#define MPP12_TW1_SDA		MPP( 12, 0xd, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP13_GPIO		MPP( 13, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP13_SD_CMD		MPP( 13, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP13_UART1_TXD		MPP( 13, 0x3, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP13_AU_SPDIFRMCLK	MPP( 13, 0xa, 0, 0, 0,   0,   0,   0,   1 )
+#define MPP13_LCDPWM		MPP( 13, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP14_GPIO		MPP( 14, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP14_SD_D0		MPP( 14, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP14_UART1_RXD		MPP( 14, 0x3, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP14_SATA1_PRESENTn	MPP( 14, 0x4, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP14_AU_SPDIFI		MPP( 14, 0xa, 0, 0, 0,   0,   0,   0,   1 )
+#define MPP14_AU_I2SDI		MPP( 14, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+#define MPP14_MII0_COL		MPP( 14, 0xd, 0, 0, 1,   1,   1,   1,   1 )
+
+#define MPP15_GPIO		MPP( 15, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP15_SD_D1		MPP( 15, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP15_UART0_RTS		MPP( 15, 0x2, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP15_UART1_TXD		MPP( 15, 0x3, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP15_SATA0_ACTn	MPP( 15, 0x4, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP15_SPI_CSn		MPP( 15, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP16_GPIO		MPP( 16, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP16_SD_D2		MPP( 16, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP16_UART0_CTS		MPP( 16, 0x2, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP16_UART1_RXD		MPP( 16, 0x3, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP16_SATA1_ACTn	MPP( 16, 0x4, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP16_LCD_EXT_REF_CLK	MPP( 16, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+#define MPP16_MII0_CRS		MPP( 16, 0xd, 0, 0, 1,   1,   1,   1,   1 )
+
+#define MPP17_GPIO		MPP( 17, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP17_SD_D3		MPP( 17, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP17_SATA0_PRESENTn	MPP( 17, 0x4, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP17_SATA1_ACTn	MPP( 17, 0xa, 0, 0, 0,   0,   0,   0,   1 )
+#define MPP17_TW1_SCK		MPP( 17, 0xd, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP18_GPO		MPP( 18, 0x0, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP18_NF_IO0		MPP( 18, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP18_PEX0_CLKREQ	MPP( 18, 0x2, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP19_GPO		MPP( 19, 0x0, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP19_NF_IO1		MPP( 19, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+
+#define MPP20_GPIO		MPP( 20, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP20_TSMP0		MPP( 20, 0x1, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP20_TDM_CH0_TX_QL	MPP( 20, 0x2, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP20_GE1_TXD0		MPP( 20, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP20_AU_SPDIFI		MPP( 20, 0x4, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP20_SATA1_ACTn	MPP( 20, 0x5, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP20_LCD_D0		MPP( 20, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP21_GPIO		MPP( 21, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP21_TSMP1		MPP( 21, 0x1, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP21_TDM_CH0_RX_QL	MPP( 21, 0x2, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP21_GE1_TXD1		MPP( 21, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP21_AU_SPDIFO		MPP( 21, 0x4, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP21_SATA0_ACTn	MPP( 21, 0x5, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP21_LCD_D1		MPP( 21, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP22_GPIO		MPP( 22, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP22_TSMP2		MPP( 22, 0x1, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP22_TDM_CH2_TX_QL	MPP( 22, 0x2, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP22_GE1_TXD2		MPP( 22, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP22_AU_SPDIFRMKCLK	MPP( 22, 0x4, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP22_SATA1_PRESENTn	MPP( 22, 0x5, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP22_LCD_D2		MPP( 22, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP23_GPIO		MPP( 23, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP23_TSMP3		MPP( 23, 0x1, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP23_TDM_CH2_RX_QL	MPP( 23, 0x2, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP23_GE1_TXD3		MPP( 23, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP23_AU_I2SBCLK	MPP( 23, 0x4, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP23_SATA0_PRESENTn	MPP( 23, 0x5, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP23_LCD_D3		MPP( 23, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP24_GPIO		MPP( 24, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP24_TSMP4		MPP( 24, 0x1, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP24_TDM_SPI_CS0	MPP( 24, 0x2, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP24_GE1_RXD0		MPP( 24, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP24_AU_I2SDO		MPP( 24, 0x4, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP24_LCD_D4		MPP( 24, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP25_GPIO		MPP( 25, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP25_TSMP5		MPP( 25, 0x1, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP25_TDM_SPI_SCK	MPP( 25, 0x2, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP25_GE1_RXD1		MPP( 25, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP25_AU_I2SLRCLK	MPP( 25, 0x4, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP25_LCD_D5		MPP( 25, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP26_GPIO		MPP( 26, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP26_TSMP6		MPP( 26, 0x1, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP26_TDM_SPI_MISO	MPP( 26, 0x2, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP26_GE1_RXD2		MPP( 26, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP26_AU_I2SMCLK	MPP( 26, 0x4, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP26_LCD_D6		MPP( 26, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP27_GPIO		MPP( 27, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP27_TSMP7		MPP( 27, 0x1, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP27_TDM_SPI_MOSI	MPP( 27, 0x2, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP27_GE1_RXD3		MPP( 27, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP27_AU_I2SDI		MPP( 27, 0x4, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP27_LCD_D7		MPP( 27, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP28_GPIO		MPP( 28, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP28_TSMP8		MPP( 28, 0x1, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP28_TDM_CODEC_INTn	MPP( 28, 0x2, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP28_GE1_COL		MPP( 28, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP28_AU_EXTCLK		MPP( 28, 0x4, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP28_LCD_D8		MPP( 28, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP29_GPIO		MPP( 29, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP29_TSMP9		MPP( 29, 0x1, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP29_TDM_CODEC_RSTn	MPP( 29, 0x2, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP29_GE1_TCLK		MPP( 29, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP29_LCD_D9		MPP( 29, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP30_GPIO		MPP( 30, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP30_TSMP10		MPP( 30, 0x1, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP30_TDM_PCLK		MPP( 30, 0x2, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP30_GE1_RXCTL		MPP( 30, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP30_LCD_D10		MPP( 30, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP31_GPIO		MPP( 31, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP31_TSMP11		MPP( 31, 0x1, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP31_TDM_FS		MPP( 31, 0x2, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP31_GE1_RXCLK		MPP( 31, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP31_LCD_D11		MPP( 31, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP32_GPIO		MPP( 32, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP32_TSMP12		MPP( 32, 0x1, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP32_TDM_DRX		MPP( 32, 0x2, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP32_GE1_TCLKOUT	MPP( 32, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP32_LCD_D12		MPP( 32, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP33_GPO		MPP( 33, 0x0, 0, 1, 0,   1,   1,   1,   1 )
+#define MPP33_TDM_DTX		MPP( 33, 0x2, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP33_GE1_TXCTL		MPP( 33, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP33_LCD_D13		MPP( 33, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP34_GPIO		MPP( 34, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP34_TDM_SPI_CS1	MPP( 34, 0x2, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP34_GE1_TXEN		MPP( 34, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP34_SATA1_ACTn	MPP( 34, 0x5, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP34_LCD_D14		MPP( 34, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP35_GPIO		MPP( 35, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP35_TDM_CH0_TX_QL	MPP( 35, 0x2, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP35_GE1_RXERR		MPP( 35, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP35_SATA0_ACTn	MPP( 35, 0x5, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP35_LCD_D15		MPP( 22, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+#define MPP35_MII0_RXERR	MPP( 35, 0xc, 0, 0, 1,   1,   1,   1,   1 )
+
+#define MPP36_GPIO		MPP( 36, 0x0, 1, 1, 1,   0,   0,   1,   1 )
+#define MPP36_TSMP0		MPP( 36, 0x1, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP36_TDM_SPI_CS1	MPP( 36, 0x2, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP36_AU_SPDIFI		MPP( 36, 0x4, 0, 0, 1,   0,   0,   1,   1 )
+#define MPP36_TW1_SDA		MPP( 36, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP37_GPIO		MPP( 37, 0x0, 1, 1, 1,   0,   0,   1,   1 )
+#define MPP37_TSMP1		MPP( 37, 0x1, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP37_TDM_CH2_TX_QL	MPP( 37, 0x2, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP37_AU_SPDIFO		MPP( 37, 0x4, 0, 0, 1,   0,   0,   1,   1 )
+#define MPP37_TW1_SCK		MPP( 37, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP38_GPIO		MPP( 38, 0x0, 1, 1, 1,   0,   0,   1,   1 )
+#define MPP38_TSMP2		MPP( 38, 0x1, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP38_TDM_CH2_RX_QL	MPP( 38, 0x2, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP38_AU_SPDIFRMLCLK	MPP( 38, 0x4, 0, 0, 1,   0,   0,   1,   1 )
+#define MPP38_LCD_D18		MPP( 38, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP39_GPIO		MPP( 39, 0x0, 1, 1, 1,   0,   0,   1,   1 )
+#define MPP39_TSMP3		MPP( 39, 0x1, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP39_TDM_SPI_CS0	MPP( 39, 0x2, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP39_AU_I2SBCLK	MPP( 39, 0x4, 0, 0, 1,   0,   0,   1,   1 )
+#define MPP39_LCD_D19		MPP( 39, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP40_GPIO		MPP( 40, 0x0, 1, 1, 1,   0,   0,   1,   1 )
+#define MPP40_TSMP4		MPP( 40, 0x1, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP40_TDM_SPI_SCK	MPP( 40, 0x2, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP40_AU_I2SDO		MPP( 40, 0x4, 0, 0, 1,   0,   0,   1,   1 )
+#define MPP40_LCD_D20		MPP( 40, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP41_GPIO		MPP( 41, 0x0, 1, 1, 1,   0,   0,   1,   1 )
+#define MPP41_TSMP5		MPP( 41, 0x1, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP41_TDM_SPI_MISO	MPP( 41, 0x2, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP41_AU_I2SLRCLK	MPP( 41, 0x4, 0, 0, 1,   0,   0,   1,   1 )
+#define MPP41_LCD_D21		MPP( 41, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP42_GPIO		MPP( 42, 0x0, 1, 1, 1,   0,   0,   1,   1 )
+#define MPP42_TSMP6		MPP( 42, 0x1, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP42_TDM_SPI_MOSI	MPP( 42, 0x2, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP42_AU_I2SMCLK	MPP( 42, 0x4, 0, 0, 1,   0,   0,   1,   1 )
+#define MPP42_LCD_D22		MPP( 42, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP43_GPIO		MPP( 43, 0x0, 1, 1, 1,   0,   0,   1,   1 )
+#define MPP43_TSMP7		MPP( 43, 0x1, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP43_TDM_CODEC_INTn	MPP( 43, 0x2, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP43_AU_I2SDI		MPP( 43, 0x4, 0, 0, 1,   0,   0,   1,   1 )
+#define MPP43_LCD_D23		MPP( 22, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP44_GPIO		MPP( 44, 0x0, 1, 1, 1,   0,   0,   1,   1 )
+#define MPP44_TSMP8		MPP( 44, 0x1, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP44_TDM_CODEC_RSTn	MPP( 44, 0x2, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP44_AU_EXTCLK		MPP( 44, 0x4, 0, 0, 1,   0,   0,   1,   1 )
+#define MPP44_LCD_CLK		MPP( 44, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP45_GPIO		MPP( 45, 0x0, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP45_TSMP9		MPP( 45, 0x1, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP45_TDM_PCLK		MPP( 45, 0x2, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP245_LCD_E		MPP( 45, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP46_GPIO		MPP( 46, 0x0, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP46_TSMP10		MPP( 46, 0x1, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP46_TDM_FS		MPP( 46, 0x2, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP46_LCD_HSYNC		MPP( 46, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP47_GPIO		MPP( 47, 0x0, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP47_TSMP11		MPP( 47, 0x1, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP47_TDM_DRX		MPP( 47, 0x2, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP47_LCD_VSYNC		MPP( 47, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP48_GPIO		MPP( 48, 0x0, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP48_TSMP12		MPP( 48, 0x1, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP48_TDM_DTX		MPP( 48, 0x2, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP48_LCD_D16		MPP( 22, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP49_GPIO		MPP( 49, 0x0, 1, 1, 0,   0,   0,   1,   0 )
+#define MPP49_GPO		MPP( 49, 0x0, 0, 1, 0,   0,   0,   0,   1 )
+#define MPP49_TSMP9		MPP( 49, 0x1, 0, 0, 0,   0,   0,   1,   0 )
+#define MPP49_TDM_CH0_RX_QL	MPP( 49, 0x2, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP49_PTP_CLK		MPP( 49, 0x5, 0, 0, 0,   0,   0,   1,   0 )
+#define MPP49_PEX0_CLKREQ	MPP( 49, 0xa, 0, 0, 0,   0,   0,   0,   1 )
+#define MPP49_LCD_D17		MPP( 49, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP_MAX			49
+
+void kirkwood_mpp_conf(unsigned int *mpp_list);
+
+#endif
diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
new file mode 100644
index 00000000..ba384b99
--- /dev/null
+++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
@@ -0,0 +1,172 @@
+/*
+ * arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+ *
+ * Marvell 88F6281 GTW GE Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/timer.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <net/dsa.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_NONE,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
+};
+
+static struct dsa_chip_data mv88f6281gtw_ge_switch_chip_data = {
+	.port_names[0]	= "lan1",
+	.port_names[1]	= "lan2",
+	.port_names[2]	= "lan3",
+	.port_names[3]	= "lan4",
+	.port_names[4]	= "wan",
+	.port_names[5]	= "cpu",
+};
+
+static struct dsa_platform_data mv88f6281gtw_ge_switch_plat_data = {
+	.nr_chips	= 1,
+	.chip		= &mv88f6281gtw_ge_switch_chip_data,
+};
+
+static const struct flash_platform_data mv88f6281gtw_ge_spi_slave_data = {
+	.type		= "mx25l12805d",
+};
+
+static struct spi_board_info __initdata mv88f6281gtw_ge_spi_slave_info[] = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &mv88f6281gtw_ge_spi_slave_data,
+		.irq		= -1,
+		.max_speed_hz	= 50000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+	},
+};
+
+static struct gpio_keys_button mv88f6281gtw_ge_button_pins[] = {
+	{
+		.code		= KEY_RESTART,
+		.gpio		= 47,
+		.desc		= "SWR Button",
+		.active_low	= 1,
+	}, {
+		.code		= KEY_WPS_BUTTON,
+		.gpio		= 46,
+		.desc		= "WPS Button",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data mv88f6281gtw_ge_button_data = {
+	.buttons	= mv88f6281gtw_ge_button_pins,
+	.nbuttons	= ARRAY_SIZE(mv88f6281gtw_ge_button_pins),
+};
+
+static struct platform_device mv88f6281gtw_ge_buttons = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &mv88f6281gtw_ge_button_data,
+	},
+};
+
+static struct gpio_led mv88f6281gtw_ge_led_pins[] = {
+	{
+		.name		= "gtw:green:Status",
+		.gpio		= 20,
+		.active_low	= 0,
+	}, {
+		.name		= "gtw:red:Status",
+		.gpio		= 21,
+		.active_low	= 0,
+	}, {
+		.name		= "gtw:green:USB",
+		.gpio		= 12,
+		.active_low	= 0,
+	},
+};
+
+static struct gpio_led_platform_data mv88f6281gtw_ge_led_data = {
+	.leds		= mv88f6281gtw_ge_led_pins,
+	.num_leds	= ARRAY_SIZE(mv88f6281gtw_ge_led_pins),
+};
+
+static struct platform_device mv88f6281gtw_ge_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &mv88f6281gtw_ge_led_data,
+	},
+};
+
+static unsigned int mv88f6281gtw_ge_mpp_config[] __initdata = {
+	MPP12_GPO,	/* Status#_USB pin  */
+	MPP20_GPIO,	/* Status#_GLED pin */
+	MPP21_GPIO,	/* Status#_RLED pin */
+	MPP46_GPIO,	/* WPS_Switch pin   */
+	MPP47_GPIO,	/* SW_Init pin      */
+	0
+};
+
+static void __init mv88f6281gtw_ge_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(mv88f6281gtw_ge_mpp_config);
+
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data);
+	kirkwood_ge00_switch_init(&mv88f6281gtw_ge_switch_plat_data, NO_IRQ);
+	spi_register_board_info(mv88f6281gtw_ge_spi_slave_info,
+				ARRAY_SIZE(mv88f6281gtw_ge_spi_slave_info));
+	kirkwood_spi_init();
+	kirkwood_uart0_init();
+	platform_device_register(&mv88f6281gtw_ge_leds);
+	platform_device_register(&mv88f6281gtw_ge_buttons);
+}
+
+static int __init mv88f6281gtw_ge_pci_init(void)
+{
+	if (machine_is_mv88f6281gtw_ge())
+		kirkwood_pcie_init(KW_PCIE0);
+
+	return 0;
+}
+subsys_initcall(mv88f6281gtw_ge_pci_init);
+
+MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board")
+	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
+	.atag_offset	= 0x100,
+	.init_machine	= mv88f6281gtw_ge_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.init_time	= kirkwood_timer_init,
+	.restart	= kirkwood_restart,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
new file mode 100644
index 00000000..3b706611
--- /dev/null
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -0,0 +1,293 @@
+/*
+ * arch/arm/mach-kirkwood/netspace_v2-setup.c
+ *
+ * LaCie Network Space v2 board setup
+ *
+ * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
+ * Copyright (C) 2009 Benoît Canet <benoit.canet@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/leds.h>
+#include <linux/gpio-fan.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <linux/platform_data/leds-kirkwood-ns2.h>
+#include "common.h"
+#include "mpp.h"
+#include "lacie_v2-common.h"
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data netspace_v2_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+
+static struct mv_sata_platform_data netspace_v2_sata_data = {
+	.n_ports	= 2,
+};
+
+/*****************************************************************************
+ * GPIO keys
+ ****************************************************************************/
+
+#define NETSPACE_V2_PUSH_BUTTON		32
+
+static struct gpio_keys_button netspace_v2_buttons[] = {
+	[0] = {
+		.code		= KEY_POWER,
+		.gpio		= NETSPACE_V2_PUSH_BUTTON,
+		.desc		= "Power push button",
+		.active_low	= 0,
+	},
+};
+
+static struct gpio_keys_platform_data netspace_v2_button_data = {
+	.buttons	= netspace_v2_buttons,
+	.nbuttons	= ARRAY_SIZE(netspace_v2_buttons),
+};
+
+static struct platform_device netspace_v2_gpio_buttons = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &netspace_v2_button_data,
+	},
+};
+
+/*****************************************************************************
+ * GPIO LEDs
+ ****************************************************************************/
+
+#define NETSPACE_V2_GPIO_RED_LED	12
+
+static struct gpio_led netspace_v2_gpio_led_pins[] = {
+	{
+		.name	= "ns_v2:red:fail",
+		.gpio	= NETSPACE_V2_GPIO_RED_LED,
+	},
+};
+
+static struct gpio_led_platform_data netspace_v2_gpio_leds_data = {
+	.num_leds	= ARRAY_SIZE(netspace_v2_gpio_led_pins),
+	.leds		= netspace_v2_gpio_led_pins,
+};
+
+static struct platform_device netspace_v2_gpio_leds = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &netspace_v2_gpio_leds_data,
+	},
+};
+
+/*****************************************************************************
+ * Dual-GPIO CPLD LEDs
+ ****************************************************************************/
+
+#define NETSPACE_V2_GPIO_BLUE_LED_SLOW	29
+#define NETSPACE_V2_GPIO_BLUE_LED_CMD	30
+
+static struct ns2_led netspace_v2_led_pins[] = {
+	{
+		.name	= "ns_v2:blue:sata",
+		.cmd	= NETSPACE_V2_GPIO_BLUE_LED_CMD,
+		.slow	= NETSPACE_V2_GPIO_BLUE_LED_SLOW,
+	},
+};
+
+static struct ns2_led_platform_data netspace_v2_leds_data = {
+	.num_leds	= ARRAY_SIZE(netspace_v2_led_pins),
+	.leds		= netspace_v2_led_pins,
+};
+
+static struct platform_device netspace_v2_leds = {
+	.name		= "leds-ns2",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &netspace_v2_leds_data,
+	},
+};
+
+/*****************************************************************************
+ * GPIO fan
+ ****************************************************************************/
+
+/* Designed for fan 40x40x16: ADDA AD0412LB-D50 6000rpm@12v */
+static struct gpio_fan_speed netspace_max_v2_fan_speed[] = {
+	{    0,  0 },
+	{ 1500,	15 },
+	{ 1700,	14 },
+	{ 1800,	13 },
+	{ 2100,	12 },
+	{ 3100,	11 },
+	{ 3300,	10 },
+	{ 4300,	 9 },
+	{ 5500,	 8 },
+};
+
+static unsigned netspace_max_v2_fan_ctrl[] = { 22, 7, 33, 23 };
+
+static struct gpio_fan_alarm netspace_max_v2_fan_alarm = {
+	.gpio		= 25,
+	.active_low	= 1,
+};
+
+static struct gpio_fan_platform_data netspace_max_v2_fan_data = {
+	.num_ctrl	= ARRAY_SIZE(netspace_max_v2_fan_ctrl),
+	.ctrl		= netspace_max_v2_fan_ctrl,
+	.alarm		= &netspace_max_v2_fan_alarm,
+	.num_speed	= ARRAY_SIZE(netspace_max_v2_fan_speed),
+	.speed		= netspace_max_v2_fan_speed,
+};
+
+static struct platform_device netspace_max_v2_gpio_fan = {
+	.name	= "gpio-fan",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &netspace_max_v2_fan_data,
+	},
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static unsigned int netspace_v2_mpp_config[] __initdata = {
+	MPP0_SPI_SCn,
+	MPP1_SPI_MOSI,
+	MPP2_SPI_SCK,
+	MPP3_SPI_MISO,
+	MPP4_NF_IO6,
+	MPP5_NF_IO7,
+	MPP6_SYSRST_OUTn,
+	MPP7_GPO,		/* Fan speed (bit 1) */
+	MPP8_TW0_SDA,
+	MPP9_TW0_SCK,
+	MPP10_UART0_TXD,
+	MPP11_UART0_RXD,
+	MPP12_GPO,		/* Red led */
+	MPP14_GPIO,		/* USB fuse */
+	MPP16_GPIO,		/* SATA 0 power */
+	MPP17_GPIO,		/* SATA 1 power */
+	MPP18_NF_IO0,
+	MPP19_NF_IO1,
+	MPP20_SATA1_ACTn,
+	MPP21_SATA0_ACTn,
+	MPP22_GPIO,		/* Fan speed (bit 0) */
+	MPP23_GPIO,		/* Fan power */
+	MPP24_GPIO,		/* USB mode select */
+	MPP25_GPIO,		/* Fan rotation fail */
+	MPP26_GPIO,		/* USB device vbus */
+	MPP28_GPIO,		/* USB enable host vbus */
+	MPP29_GPIO,		/* Blue led (slow register) */
+	MPP30_GPIO,		/* Blue led (command register) */
+	MPP31_GPIO,		/* Board power off */
+	MPP32_GPIO,		/* Power button (0 = Released, 1 = Pushed) */
+	MPP33_GPO,		/* Fan speed (bit 2) */
+	0
+};
+
+#define NETSPACE_V2_GPIO_POWER_OFF	31
+
+static void netspace_v2_power_off(void)
+{
+	gpio_set_value(NETSPACE_V2_GPIO_POWER_OFF, 1);
+}
+
+static void __init netspace_v2_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(netspace_v2_mpp_config);
+
+	if (machine_is_netspace_max_v2())
+		lacie_v2_hdd_power_init(2);
+	else
+		lacie_v2_hdd_power_init(1);
+
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&netspace_v2_ge00_data);
+	kirkwood_sata_init(&netspace_v2_sata_data);
+	kirkwood_uart0_init();
+	lacie_v2_register_flash();
+	lacie_v2_register_i2c_devices();
+
+	platform_device_register(&netspace_v2_leds);
+	platform_device_register(&netspace_v2_gpio_leds);
+	platform_device_register(&netspace_v2_gpio_buttons);
+	if (machine_is_netspace_max_v2())
+		platform_device_register(&netspace_max_v2_gpio_fan);
+
+	if (gpio_request(NETSPACE_V2_GPIO_POWER_OFF, "power-off") == 0 &&
+	    gpio_direction_output(NETSPACE_V2_GPIO_POWER_OFF, 0) == 0)
+		pm_power_off = netspace_v2_power_off;
+	else
+		pr_err("netspace_v2: failed to configure power-off GPIO\n");
+}
+
+#ifdef CONFIG_MACH_NETSPACE_V2
+MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
+	.atag_offset	= 0x100,
+	.init_machine	= netspace_v2_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.init_time	= kirkwood_timer_init,
+	.restart	= kirkwood_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_INETSPACE_V2
+MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
+	.atag_offset	= 0x100,
+	.init_machine	= netspace_v2_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.init_time	= kirkwood_timer_init,
+	.restart	= kirkwood_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_NETSPACE_MAX_V2
+MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2")
+	.atag_offset	= 0x100,
+	.init_machine	= netspace_v2_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.init_time	= kirkwood_timer_init,
+	.restart	= kirkwood_restart,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
new file mode 100644
index 00000000..913d032c
--- /dev/null
+++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
@@ -0,0 +1,422 @@
+/*
+ * arch/arm/mach-kirkwood/netxbig_v2-setup.c
+ *
+ * LaCie 2Big and 5Big Network v2 board setup
+ *
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <linux/platform_data/leds-kirkwood-netxbig.h>
+#include "common.h"
+#include "mpp.h"
+#include "lacie_v2-common.h"
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data netxbig_v2_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv643xx_eth_platform_data netxbig_v2_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+
+static struct mv_sata_platform_data netxbig_v2_sata_data = {
+	.n_ports	= 2,
+};
+
+/*****************************************************************************
+ * GPIO keys
+ ****************************************************************************/
+
+#define NETXBIG_V2_GPIO_SWITCH_POWER_ON		13
+#define NETXBIG_V2_GPIO_SWITCH_POWER_OFF	15
+#define NETXBIG_V2_GPIO_FUNC_BUTTON		34
+
+#define NETXBIG_V2_SWITCH_POWER_ON		0x1
+#define NETXBIG_V2_SWITCH_POWER_OFF		0x2
+
+static struct gpio_keys_button netxbig_v2_buttons[] = {
+	[0] = {
+		.type           = EV_SW,
+		.code           = NETXBIG_V2_SWITCH_POWER_ON,
+		.gpio           = NETXBIG_V2_GPIO_SWITCH_POWER_ON,
+		.desc           = "Back power switch (on|auto)",
+		.active_low     = 1,
+	},
+	[1] = {
+		.type           = EV_SW,
+		.code           = NETXBIG_V2_SWITCH_POWER_OFF,
+		.gpio           = NETXBIG_V2_GPIO_SWITCH_POWER_OFF,
+		.desc           = "Back power switch (auto|off)",
+		.active_low     = 1,
+	},
+	[2] = {
+		.code		= KEY_OPTION,
+		.gpio		= NETXBIG_V2_GPIO_FUNC_BUTTON,
+		.desc		= "Function button",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data netxbig_v2_button_data = {
+	.buttons	= netxbig_v2_buttons,
+	.nbuttons	= ARRAY_SIZE(netxbig_v2_buttons),
+};
+
+static struct platform_device netxbig_v2_gpio_buttons = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &netxbig_v2_button_data,
+	},
+};
+
+/*****************************************************************************
+ * GPIO extension LEDs
+ ****************************************************************************/
+
+/*
+ * The LEDs are controlled by a CPLD and can be configured through a GPIO
+ * extension bus:
+ *
+ * - address register : bit [0-2] -> GPIO [47-49]
+ * - data register    : bit [0-2] -> GPIO [44-46]
+ * - enable register  : GPIO 29
+ */
+
+static int netxbig_v2_gpio_ext_addr[] = { 47, 48, 49 };
+static int netxbig_v2_gpio_ext_data[] = { 44, 45, 46 };
+
+static struct netxbig_gpio_ext netxbig_v2_gpio_ext = {
+	.addr		= netxbig_v2_gpio_ext_addr,
+	.num_addr	= ARRAY_SIZE(netxbig_v2_gpio_ext_addr),
+	.data		= netxbig_v2_gpio_ext_data,
+	.num_data	= ARRAY_SIZE(netxbig_v2_gpio_ext_data),
+	.enable		= 29,
+};
+
+/*
+ * Address register selection:
+ *
+ * addr | register
+ * ----------------------------
+ *   0  | front LED
+ *   1  | front LED brightness
+ *   2  | SATA LED brightness
+ *   3  | SATA0 LED
+ *   4  | SATA1 LED
+ *   5  | SATA2 LED
+ *   6  | SATA3 LED
+ *   7  | SATA4 LED
+ *
+ * Data register configuration:
+ *
+ * data | LED brightness
+ * -------------------------------------------------
+ *   0  | min (off)
+ *   -  | -
+ *   7  | max
+ *
+ * data | front LED mode
+ * -------------------------------------------------
+ *   0  | fix off
+ *   1  | fix blue on
+ *   2  | fix red on
+ *   3  | blink blue on=1 sec and blue off=1 sec
+ *   4  | blink red on=1 sec and red off=1 sec
+ *   5  | blink blue on=2.5 sec and red on=0.5 sec
+ *   6  | blink blue on=1 sec and red on=1 sec
+ *   7  | blink blue on=0.5 sec and blue off=2.5 sec
+ *
+ * data | SATA LED mode
+ * -------------------------------------------------
+ *   0  | fix off
+ *   1  | SATA activity blink
+ *   2  | fix red on
+ *   3  | blink blue on=1 sec and blue off=1 sec
+ *   4  | blink red on=1 sec and red off=1 sec
+ *   5  | blink blue on=2.5 sec and red on=0.5 sec
+ *   6  | blink blue on=1 sec and red on=1 sec
+ *   7  | fix blue on
+ */
+
+static int netxbig_v2_red_mled[NETXBIG_LED_MODE_NUM] = {
+	[NETXBIG_LED_OFF]	= 0,
+	[NETXBIG_LED_ON]	= 2,
+	[NETXBIG_LED_SATA]	= NETXBIG_LED_INVALID_MODE,
+	[NETXBIG_LED_TIMER1]	= 4,
+	[NETXBIG_LED_TIMER2]	= NETXBIG_LED_INVALID_MODE,
+};
+
+static int netxbig_v2_blue_pwr_mled[NETXBIG_LED_MODE_NUM] = {
+	[NETXBIG_LED_OFF]	= 0,
+	[NETXBIG_LED_ON]	= 1,
+	[NETXBIG_LED_SATA]	= NETXBIG_LED_INVALID_MODE,
+	[NETXBIG_LED_TIMER1]	= 3,
+	[NETXBIG_LED_TIMER2]	= 7,
+};
+
+static int netxbig_v2_blue_sata_mled[NETXBIG_LED_MODE_NUM] = {
+	[NETXBIG_LED_OFF]	= 0,
+	[NETXBIG_LED_ON]	= 7,
+	[NETXBIG_LED_SATA]	= 1,
+	[NETXBIG_LED_TIMER1]	= 3,
+	[NETXBIG_LED_TIMER2]	= NETXBIG_LED_INVALID_MODE,
+};
+
+static struct netxbig_led_timer netxbig_v2_led_timer[] = {
+	[0] = {
+		.delay_on	= 500,
+		.delay_off	= 500,
+		.mode		= NETXBIG_LED_TIMER1,
+	},
+	[1] = {
+		.delay_on	= 500,
+		.delay_off	= 1000,
+		.mode		= NETXBIG_LED_TIMER2,
+	},
+};
+
+#define NETXBIG_LED(_name, maddr, mval, baddr)			\
+	{ .name		= _name,				\
+	  .mode_addr	= maddr,				\
+	  .mode_val	= mval,					\
+	  .bright_addr	= baddr }
+
+static struct netxbig_led net2big_v2_leds_ctrl[] = {
+	NETXBIG_LED("net2big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled,  1),
+	NETXBIG_LED("net2big-v2:red:power",  0, netxbig_v2_red_mled,       1),
+	NETXBIG_LED("net2big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
+	NETXBIG_LED("net2big-v2:red:sata0",  3, netxbig_v2_red_mled,       2),
+	NETXBIG_LED("net2big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
+	NETXBIG_LED("net2big-v2:red:sata1",  4, netxbig_v2_red_mled,       2),
+};
+
+static struct netxbig_led_platform_data net2big_v2_leds_data = {
+	.gpio_ext	= &netxbig_v2_gpio_ext,
+	.timer		= netxbig_v2_led_timer,
+	.num_timer	= ARRAY_SIZE(netxbig_v2_led_timer),
+	.leds		= net2big_v2_leds_ctrl,
+	.num_leds	= ARRAY_SIZE(net2big_v2_leds_ctrl),
+};
+
+static struct netxbig_led net5big_v2_leds_ctrl[] = {
+	NETXBIG_LED("net5big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled,  1),
+	NETXBIG_LED("net5big-v2:red:power",  0, netxbig_v2_red_mled,       1),
+	NETXBIG_LED("net5big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
+	NETXBIG_LED("net5big-v2:red:sata0",  3, netxbig_v2_red_mled,       2),
+	NETXBIG_LED("net5big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
+	NETXBIG_LED("net5big-v2:red:sata1",  4, netxbig_v2_red_mled,       2),
+	NETXBIG_LED("net5big-v2:blue:sata2", 5, netxbig_v2_blue_sata_mled, 2),
+	NETXBIG_LED("net5big-v2:red:sata2",  5, netxbig_v2_red_mled,       2),
+	NETXBIG_LED("net5big-v2:blue:sata3", 6, netxbig_v2_blue_sata_mled, 2),
+	NETXBIG_LED("net5big-v2:red:sata3",  6, netxbig_v2_red_mled,       2),
+	NETXBIG_LED("net5big-v2:blue:sata4", 7, netxbig_v2_blue_sata_mled, 2),
+	NETXBIG_LED("net5big-v2:red:sata5",  7, netxbig_v2_red_mled,       2),
+};
+
+static struct netxbig_led_platform_data net5big_v2_leds_data = {
+	.gpio_ext	= &netxbig_v2_gpio_ext,
+	.timer		= netxbig_v2_led_timer,
+	.num_timer	= ARRAY_SIZE(netxbig_v2_led_timer),
+	.leds		= net5big_v2_leds_ctrl,
+	.num_leds	= ARRAY_SIZE(net5big_v2_leds_ctrl),
+};
+
+static struct platform_device netxbig_v2_leds = {
+	.name		= "leds-netxbig",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &net2big_v2_leds_data,
+	},
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static unsigned int net2big_v2_mpp_config[] __initdata = {
+	MPP0_SPI_SCn,
+	MPP1_SPI_MOSI,
+	MPP2_SPI_SCK,
+	MPP3_SPI_MISO,
+	MPP6_SYSRST_OUTn,
+	MPP7_GPO,		/* Request power-off */
+	MPP8_TW0_SDA,
+	MPP9_TW0_SCK,
+	MPP10_UART0_TXD,
+	MPP11_UART0_RXD,
+	MPP13_GPIO,		/* Rear power switch (on|auto) */
+	MPP14_GPIO,		/* USB fuse alarm */
+	MPP15_GPIO,		/* Rear power switch (auto|off) */
+	MPP16_GPIO,		/* SATA HDD1 power */
+	MPP17_GPIO,		/* SATA HDD2 power */
+	MPP20_SATA1_ACTn,
+	MPP21_SATA0_ACTn,
+	MPP24_GPIO,		/* USB mode select */
+	MPP26_GPIO,		/* USB device vbus */
+	MPP28_GPIO,		/* USB enable host vbus */
+	MPP29_GPIO,		/* GPIO extension ALE */
+	MPP34_GPIO,		/* Rear Push button */
+	MPP35_GPIO,		/* Inhibit switch power-off */
+	MPP36_GPIO,		/* SATA HDD1 presence */
+	MPP37_GPIO,		/* SATA HDD2 presence */
+	MPP40_GPIO,		/* eSATA presence */
+	MPP44_GPIO,		/* GPIO extension (data 0) */
+	MPP45_GPIO,		/* GPIO extension (data 1) */
+	MPP46_GPIO,		/* GPIO extension (data 2) */
+	MPP47_GPIO,		/* GPIO extension (addr 0) */
+	MPP48_GPIO,		/* GPIO extension (addr 1) */
+	MPP49_GPIO,		/* GPIO extension (addr 2) */
+	0
+};
+
+static unsigned int net5big_v2_mpp_config[] __initdata = {
+	MPP0_SPI_SCn,
+	MPP1_SPI_MOSI,
+	MPP2_SPI_SCK,
+	MPP3_SPI_MISO,
+	MPP6_SYSRST_OUTn,
+	MPP7_GPO,		/* Request power-off */
+	MPP8_TW0_SDA,
+	MPP9_TW0_SCK,
+	MPP10_UART0_TXD,
+	MPP11_UART0_RXD,
+	MPP13_GPIO,		/* Rear power switch (on|auto) */
+	MPP14_GPIO,		/* USB fuse alarm */
+	MPP15_GPIO,		/* Rear power switch (auto|off) */
+	MPP16_GPIO,		/* SATA HDD1 power */
+	MPP17_GPIO,		/* SATA HDD2 power */
+	MPP20_GE1_TXD0,
+	MPP21_GE1_TXD1,
+	MPP22_GE1_TXD2,
+	MPP23_GE1_TXD3,
+	MPP24_GE1_RXD0,
+	MPP25_GE1_RXD1,
+	MPP26_GE1_RXD2,
+	MPP27_GE1_RXD3,
+	MPP28_GPIO,		/* USB enable host vbus */
+	MPP29_GPIO,		/* GPIO extension ALE */
+	MPP30_GE1_RXCTL,
+	MPP31_GE1_RXCLK,
+	MPP32_GE1_TCLKOUT,
+	MPP33_GE1_TXCTL,
+	MPP34_GPIO,		/* Rear Push button */
+	MPP35_GPIO,		/* Inhibit switch power-off */
+	MPP36_GPIO,		/* SATA HDD1 presence */
+	MPP37_GPIO,		/* SATA HDD2 presence */
+	MPP38_GPIO,		/* SATA HDD3 presence */
+	MPP39_GPIO,		/* SATA HDD4 presence */
+	MPP40_GPIO,		/* SATA HDD5 presence */
+	MPP41_GPIO,		/* SATA HDD3 power */
+	MPP42_GPIO,		/* SATA HDD4 power */
+	MPP43_GPIO,		/* SATA HDD5 power */
+	MPP44_GPIO,		/* GPIO extension (data 0) */
+	MPP45_GPIO,		/* GPIO extension (data 1) */
+	MPP46_GPIO,		/* GPIO extension (data 2) */
+	MPP47_GPIO,		/* GPIO extension (addr 0) */
+	MPP48_GPIO,		/* GPIO extension (addr 1) */
+	MPP49_GPIO,		/* GPIO extension (addr 2) */
+	0
+};
+
+#define NETXBIG_V2_GPIO_POWER_OFF		7
+
+static void netxbig_v2_power_off(void)
+{
+	gpio_set_value(NETXBIG_V2_GPIO_POWER_OFF, 1);
+}
+
+static void __init netxbig_v2_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	if (machine_is_net2big_v2())
+		kirkwood_mpp_conf(net2big_v2_mpp_config);
+	else
+		kirkwood_mpp_conf(net5big_v2_mpp_config);
+
+	if (machine_is_net2big_v2())
+		lacie_v2_hdd_power_init(2);
+	else
+		lacie_v2_hdd_power_init(5);
+
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&netxbig_v2_ge00_data);
+	if (machine_is_net5big_v2())
+		kirkwood_ge01_init(&netxbig_v2_ge01_data);
+	kirkwood_sata_init(&netxbig_v2_sata_data);
+	kirkwood_uart0_init();
+	lacie_v2_register_flash();
+	lacie_v2_register_i2c_devices();
+
+	if (machine_is_net5big_v2())
+		netxbig_v2_leds.dev.platform_data = &net5big_v2_leds_data;
+	platform_device_register(&netxbig_v2_leds);
+	platform_device_register(&netxbig_v2_gpio_buttons);
+
+	if (gpio_request(NETXBIG_V2_GPIO_POWER_OFF, "power-off") == 0 &&
+	    gpio_direction_output(NETXBIG_V2_GPIO_POWER_OFF, 0) == 0)
+		pm_power_off = netxbig_v2_power_off;
+	else
+		pr_err("netxbig_v2: failed to configure power-off GPIO\n");
+}
+
+#ifdef CONFIG_MACH_NET2BIG_V2
+MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2")
+	.atag_offset	= 0x100,
+	.init_machine	= netxbig_v2_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.init_time	= kirkwood_timer_init,
+	.restart	= kirkwood_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_NET5BIG_V2
+MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2")
+	.atag_offset	= 0x100,
+	.init_machine	= netxbig_v2_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.init_time	= kirkwood_timer_init,
+	.restart	= kirkwood_restart,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
new file mode 100644
index 00000000..6a6eb548
--- /dev/null
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -0,0 +1,254 @@
+/*
+ * arch/arm/mach-kirkwood/openrd-setup.c
+ *
+ * Marvell OpenRD (Base|Client|Ultimate) Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <linux/platform_data/mmc-mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition openrd_nand_parts[] = {
+	{
+		.name		= "u-boot",
+		.offset		= 0,
+		.size		= SZ_1M,
+		.mask_flags	= MTD_WRITEABLE
+	}, {
+		.name		= "uImage",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= SZ_4M
+	}, {
+		.name		= "root",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= MTDPART_SIZ_FULL
+	},
+};
+
+static struct mv643xx_eth_platform_data openrd_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv643xx_eth_platform_data openrd_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(24),
+};
+
+static struct mv_sata_platform_data openrd_sata_data = {
+	.n_ports	= 2,
+};
+
+static struct mvsdio_platform_data openrd_mvsdio_data = {
+	.gpio_card_detect = 29,	/* MPP29 used as SD card detect */
+	.gpio_write_protect = -1,
+};
+
+static unsigned int openrd_mpp_config[] __initdata = {
+	MPP12_SD_CLK,
+	MPP13_SD_CMD,
+	MPP14_SD_D0,
+	MPP15_SD_D1,
+	MPP16_SD_D2,
+	MPP17_SD_D3,
+	MPP28_GPIO,
+	MPP29_GPIO,
+	MPP34_GPIO,
+	0
+};
+
+/* Configure MPP for UART1 */
+static unsigned int openrd_uart1_mpp_config[] __initdata = {
+	MPP13_UART1_TXD,
+	MPP14_UART1_RXD,
+	0
+};
+
+static struct i2c_board_info i2c_board_info[] __initdata = {
+	{
+		I2C_BOARD_INFO("cs42l51", 0x4a),
+	},
+};
+
+static struct platform_device openrd_client_audio_device = {
+	.name		= "openrd-client-audio",
+	.id		= -1,
+};
+
+static int __initdata uart1;
+
+static int __init sd_uart_selection(char *str)
+{
+	uart1 = -EINVAL;
+
+	/* Default is SD. Change if required, for UART */
+	if (!str)
+		return 0;
+
+	if (!strncmp(str, "232", 3)) {
+		uart1 = 232;
+	} else if (!strncmp(str, "485", 3)) {
+		/* OpenRD-Base doesn't have RS485. Treat is as an
+		 * unknown argument & just have default setting -
+		 * which is SD */
+		if (machine_is_openrd_base()) {
+			uart1 = -ENODEV;
+			return 1;
+		}
+
+		uart1 = 485;
+	}
+	return 1;
+}
+/* Parse boot_command_line string kw_openrd_init_uart1=232/485 */
+__setup("kw_openrd_init_uart1=", sd_uart_selection);
+
+static int __init uart1_mpp_config(void)
+{
+	kirkwood_mpp_conf(openrd_uart1_mpp_config);
+
+	if (gpio_request(34, "SD_UART1_SEL")) {
+		pr_err("GPIO request 34 failed for SD/UART1 selection\n");
+		return -EIO;
+	}
+
+	if (gpio_request(28, "RS232_RS485_SEL")) {
+		pr_err("GPIO request 28 failed for RS232/RS485 selection\n");
+		gpio_free(34);
+		return -EIO;
+	}
+
+	/* Select UART1
+	 * Pin # 34: 0 => UART1, 1 => SD */
+	gpio_direction_output(34, 0);
+
+	/* Select RS232 OR RS485
+	 * Pin # 28: 0 => RS232, 1 => RS485 */
+	if (uart1 == 232)
+		gpio_direction_output(28, 0);
+	else
+		gpio_direction_output(28, 1);
+
+	gpio_free(34);
+	gpio_free(28);
+
+	return 0;
+}
+
+static void __init openrd_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(openrd_mpp_config);
+
+	kirkwood_uart0_init();
+	kirkwood_nand_init(ARRAY_AND_SIZE(openrd_nand_parts), 25);
+
+	kirkwood_ehci_init();
+
+	if (machine_is_openrd_ultimate()) {
+		openrd_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
+		openrd_ge01_data.phy_addr = MV643XX_ETH_PHY_ADDR(1);
+	}
+
+	kirkwood_ge00_init(&openrd_ge00_data);
+	if (!machine_is_openrd_base())
+		kirkwood_ge01_init(&openrd_ge01_data);
+
+	kirkwood_sata_init(&openrd_sata_data);
+
+	kirkwood_i2c_init();
+
+	if (machine_is_openrd_client() || machine_is_openrd_ultimate()) {
+		platform_device_register(&openrd_client_audio_device);
+		i2c_register_board_info(0, i2c_board_info,
+			ARRAY_SIZE(i2c_board_info));
+		kirkwood_audio_init();
+	}
+
+	if (uart1 <= 0) {
+		if (uart1 < 0)
+			pr_err("Invalid kernel parameter to select UART1. Defaulting to SD. ERROR CODE: %d\n",
+			       uart1);
+
+		/* Select SD
+		 * Pin # 34: 0 => UART1, 1 => SD */
+		if (gpio_request(34, "SD_UART1_SEL")) {
+			pr_err("GPIO request 34 failed for SD/UART1 selection\n");
+		} else {
+
+			gpio_direction_output(34, 1);
+			gpio_free(34);
+			kirkwood_sdio_init(&openrd_mvsdio_data);
+		}
+	} else {
+		if (!uart1_mpp_config())
+			kirkwood_uart1_init();
+	}
+}
+
+static int __init openrd_pci_init(void)
+{
+	if (machine_is_openrd_base() ||
+	    machine_is_openrd_client() ||
+	    machine_is_openrd_ultimate())
+		kirkwood_pcie_init(KW_PCIE0);
+
+	return 0;
+}
+subsys_initcall(openrd_pci_init);
+
+#ifdef CONFIG_MACH_OPENRD_BASE
+MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
+	/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
+	.atag_offset	= 0x100,
+	.init_machine	= openrd_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.init_time	= kirkwood_timer_init,
+	.restart	= kirkwood_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_OPENRD_CLIENT
+MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board")
+	/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
+	.atag_offset	= 0x100,
+	.init_machine	= openrd_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.init_time	= kirkwood_timer_init,
+	.restart	= kirkwood_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_OPENRD_ULTIMATE
+MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board")
+	/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
+	.atag_offset	= 0x100,
+	.init_machine	= openrd_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.init_time	= kirkwood_timer_init,
+	.restart	= kirkwood_restart,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
new file mode 100644
index 00000000..7f43e6c2
--- /dev/null
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -0,0 +1,266 @@
+/*
+ * arch/arm/mach-kirkwood/pcie.c
+ *
+ * PCIe functions for Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <video/vga.h>
+#include <asm/irq.h>
+#include <asm/mach/pci.h>
+#include <plat/pcie.h>
+#include <mach/bridge-regs.h>
+#include "common.h"
+
+static void kirkwood_enable_pcie_clk(const char *port)
+{
+	struct clk *clk;
+
+	clk = clk_get_sys("pcie", port);
+	if (IS_ERR(clk)) {
+		pr_err("PCIE clock %s missing\n", port);
+		return;
+	}
+	clk_prepare_enable(clk);
+	clk_put(clk);
+}
+
+/* This function is called very early in the boot when probing the
+   hardware to determine what we actually are, and what rate tclk is
+   ticking at. Hence calling kirkwood_enable_pcie_clk() is not
+   possible since the clk tree has not been created yet. */
+void kirkwood_enable_pcie(void)
+{
+	u32 curr = readl(CLOCK_GATING_CTRL);
+	if (!(curr & CGC_PEX0))
+		writel(curr | CGC_PEX0, CLOCK_GATING_CTRL);
+}
+
+void kirkwood_pcie_id(u32 *dev, u32 *rev)
+{
+	kirkwood_enable_pcie();
+	*dev = orion_pcie_dev_id(PCIE_VIRT_BASE);
+	*rev = orion_pcie_rev(PCIE_VIRT_BASE);
+}
+
+struct pcie_port {
+	u8			root_bus_nr;
+	void __iomem		*base;
+	spinlock_t		conf_lock;
+	int			irq;
+	struct resource		res;
+};
+
+static int pcie_port_map[2];
+static int num_pcie_ports;
+
+static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
+{
+	/*
+	 * Don't go out when trying to access --
+	 * 1. nonexisting device on local bus
+	 * 2. where there's no device connected (no link)
+	 */
+	if (bus == pp->root_bus_nr && dev == 0)
+		return 1;
+
+	if (!orion_pcie_link_up(pp->base))
+		return 0;
+
+	if (bus == pp->root_bus_nr && dev != 1)
+		return 0;
+
+	return 1;
+}
+
+
+/*
+ * PCIe config cycles are done by programming the PCIE_CONF_ADDR register
+ * and then reading the PCIE_CONF_DATA register. Need to make sure these
+ * transactions are atomic.
+ */
+
+static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
+			int size, u32 *val)
+{
+	struct pci_sys_data *sys = bus->sysdata;
+	struct pcie_port *pp = sys->private_data;
+	unsigned long flags;
+	int ret;
+
+	if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) {
+		*val = 0xffffffff;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	spin_lock_irqsave(&pp->conf_lock, flags);
+	ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val);
+	spin_unlock_irqrestore(&pp->conf_lock, flags);
+
+	return ret;
+}
+
+static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
+			int where, int size, u32 val)
+{
+	struct pci_sys_data *sys = bus->sysdata;
+	struct pcie_port *pp = sys->private_data;
+	unsigned long flags;
+	int ret;
+
+	if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	spin_lock_irqsave(&pp->conf_lock, flags);
+	ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val);
+	spin_unlock_irqrestore(&pp->conf_lock, flags);
+
+	return ret;
+}
+
+static struct pci_ops pcie_ops = {
+	.read = pcie_rd_conf,
+	.write = pcie_wr_conf,
+};
+
+static void __init pcie0_ioresources_init(struct pcie_port *pp)
+{
+	pp->base = PCIE_VIRT_BASE;
+	pp->irq	= IRQ_KIRKWOOD_PCIE;
+
+	/*
+	 * IORESOURCE_MEM
+	 */
+	pp->res.name = "PCIe 0 MEM";
+	pp->res.start = KIRKWOOD_PCIE_MEM_PHYS_BASE;
+	pp->res.end = pp->res.start + KIRKWOOD_PCIE_MEM_SIZE - 1;
+	pp->res.flags = IORESOURCE_MEM;
+}
+
+static void __init pcie1_ioresources_init(struct pcie_port *pp)
+{
+	pp->base = PCIE1_VIRT_BASE;
+	pp->irq	= IRQ_KIRKWOOD_PCIE1;
+
+	/*
+	 * IORESOURCE_MEM
+	 */
+	pp->res.name = "PCIe 1 MEM";
+	pp->res.start = KIRKWOOD_PCIE1_MEM_PHYS_BASE;
+	pp->res.end = pp->res.start + KIRKWOOD_PCIE1_MEM_SIZE - 1;
+	pp->res.flags = IORESOURCE_MEM;
+}
+
+static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
+{
+	struct pcie_port *pp;
+	int index;
+
+	if (nr >= num_pcie_ports)
+		return 0;
+
+	index = pcie_port_map[nr];
+	pr_info("PCI: bus%d uses PCIe port %d\n", sys->busnr, index);
+
+	pp = kzalloc(sizeof(*pp), GFP_KERNEL);
+	if (!pp)
+		panic("PCIe: failed to allocate pcie_port data");
+	sys->private_data = pp;
+	pp->root_bus_nr = sys->busnr;
+	spin_lock_init(&pp->conf_lock);
+
+	switch (index) {
+	case 0:
+		kirkwood_enable_pcie_clk("0");
+		pcie0_ioresources_init(pp);
+		pci_ioremap_io(SZ_64K * sys->busnr, KIRKWOOD_PCIE_IO_PHYS_BASE);
+		break;
+	case 1:
+		kirkwood_enable_pcie_clk("1");
+		pcie1_ioresources_init(pp);
+		pci_ioremap_io(SZ_64K * sys->busnr,
+			       KIRKWOOD_PCIE1_IO_PHYS_BASE);
+		break;
+	default:
+		panic("PCIe setup: invalid controller %d", index);
+	}
+
+	if (request_resource(&iomem_resource, &pp->res))
+		panic("Request PCIe%d Memory resource failed\n", index);
+
+	pci_add_resource_offset(&sys->resources, &pp->res, sys->mem_offset);
+
+	/*
+	 * Generic PCIe unit setup.
+	 */
+	orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
+
+	orion_pcie_setup(pp->base);
+
+	return 1;
+}
+
+/*
+ * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it
+ * is operating as a root complex this needs to be switched to
+ * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on
+ * the device. Decoding setup is handled by the orion code.
+ */
+static void rc_pci_fixup(struct pci_dev *dev)
+{
+	if (dev->bus->parent == NULL && dev->devfn == 0) {
+		int i;
+
+		dev->class &= 0xff;
+		dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
+		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+			dev->resource[i].start = 0;
+			dev->resource[i].end   = 0;
+			dev->resource[i].flags = 0;
+		}
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
+
+static int __init kirkwood_pcie_map_irq(const struct pci_dev *dev, u8 slot,
+	u8 pin)
+{
+	struct pci_sys_data *sys = dev->sysdata;
+	struct pcie_port *pp = sys->private_data;
+
+	return pp->irq;
+}
+
+static struct hw_pci kirkwood_pci __initdata = {
+	.setup		= kirkwood_pcie_setup,
+	.map_irq	= kirkwood_pcie_map_irq,
+	.ops            = &pcie_ops,
+};
+
+static void __init add_pcie_port(int index, void __iomem *base)
+{
+	pcie_port_map[num_pcie_ports++] = index;
+	pr_info("Kirkwood PCIe port %d: link %s\n", index,
+		orion_pcie_link_up(base) ? "up" : "down");
+}
+
+void __init kirkwood_pcie_init(unsigned int portmask)
+{
+	vga_base = KIRKWOOD_PCIE_MEM_PHYS_BASE;
+
+	if (portmask & KW_PCIE0)
+		add_pcie_port(0, PCIE_VIRT_BASE);
+
+	if (portmask & KW_PCIE1)
+		add_pcie_port(1, PCIE1_VIRT_BASE);
+
+	kirkwood_pci.nr_controllers = num_pcie_ports;
+	pci_common_init(&kirkwood_pci);
+}
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
new file mode 100644
index 00000000..e4fd3129
--- /dev/null
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -0,0 +1,89 @@
+/*
+ * arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+ *
+ * Marvell RD-88F6192-NAS Reference Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/orion-gpio.h>
+#include "common.h"
+
+#define RD88F6192_GPIO_USB_VBUS		10
+
+static struct mv643xx_eth_platform_data rd88f6192_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv_sata_platform_data rd88f6192_sata_data = {
+	.n_ports	= 2,
+};
+
+static const struct flash_platform_data rd88F6192_spi_slave_data = {
+	.type		= "m25p128",
+};
+
+static struct spi_board_info __initdata rd88F6192_spi_slave_info[] = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &rd88F6192_spi_slave_data,
+		.irq		= -1,
+		.max_speed_hz	= 20000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+	},
+};
+
+static void __init rd88f6192_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+
+	orion_gpio_set_valid(RD88F6192_GPIO_USB_VBUS, 1);
+	if (gpio_request(RD88F6192_GPIO_USB_VBUS, "USB VBUS") != 0 ||
+	    gpio_direction_output(RD88F6192_GPIO_USB_VBUS, 1) != 0)
+		pr_err("RD-88F6192-NAS: failed to setup USB VBUS GPIO\n");
+
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&rd88f6192_ge00_data);
+	kirkwood_sata_init(&rd88f6192_sata_data);
+	spi_register_board_info(rd88F6192_spi_slave_info,
+				ARRAY_SIZE(rd88F6192_spi_slave_info));
+	kirkwood_spi_init();
+	kirkwood_uart0_init();
+}
+
+static int __init rd88f6192_pci_init(void)
+{
+	if (machine_is_rd88f6192_nas())
+		kirkwood_pcie_init(KW_PCIE0);
+
+	return 0;
+}
+subsys_initcall(rd88f6192_pci_init);
+
+MACHINE_START(RD88F6192_NAS, "Marvell RD-88F6192-NAS Development Board")
+	/* Maintainer: Saeed Bishara <saeed@marvell.com> */
+	.atag_offset	= 0x100,
+	.init_machine	= rd88f6192_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.init_time	= kirkwood_timer_init,
+	.restart	= kirkwood_restart,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
new file mode 100644
index 00000000..d2422316
--- /dev/null
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -0,0 +1,126 @@
+/*
+ * arch/arm/mach-kirkwood/rd88f6281-setup.c
+ *
+ * Marvell RD-88F6281 Reference Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <net/dsa.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <linux/platform_data/mmc-mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition rd88f6281_nand_parts[] = {
+	{
+		.name = "u-boot",
+		.offset = 0,
+		.size = SZ_1M
+	}, {
+		.name = "uImage",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_2M
+	}, {
+		.name = "root",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL
+	},
+};
+
+static struct mv643xx_eth_platform_data rd88f6281_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_NONE,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
+};
+
+static struct dsa_chip_data rd88f6281_switch_chip_data = {
+	.port_names[0]	= "lan1",
+	.port_names[1]	= "lan2",
+	.port_names[2]	= "lan3",
+	.port_names[3]	= "lan4",
+	.port_names[5]	= "cpu",
+};
+
+static struct dsa_platform_data rd88f6281_switch_plat_data = {
+	.nr_chips	= 1,
+	.chip		= &rd88f6281_switch_chip_data,
+};
+
+static struct mv643xx_eth_platform_data rd88f6281_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(11),
+};
+
+static struct mv_sata_platform_data rd88f6281_sata_data = {
+	.n_ports	= 2,
+};
+
+static struct mvsdio_platform_data rd88f6281_mvsdio_data = {
+	.gpio_card_detect = 28,
+	.gpio_write_protect = -1,
+};
+
+static unsigned int rd88f6281_mpp_config[] __initdata = {
+	MPP28_GPIO,
+	0
+};
+
+static void __init rd88f6281_init(void)
+{
+	u32 dev, rev;
+
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(rd88f6281_mpp_config);
+
+	kirkwood_nand_init(ARRAY_AND_SIZE(rd88f6281_nand_parts), 25);
+	kirkwood_ehci_init();
+
+	kirkwood_ge00_init(&rd88f6281_ge00_data);
+	kirkwood_pcie_id(&dev, &rev);
+	if (rev == MV88F6281_REV_A0) {
+		rd88f6281_switch_chip_data.sw_addr = 10;
+		kirkwood_ge01_init(&rd88f6281_ge01_data);
+	} else {
+		rd88f6281_switch_chip_data.port_names[4] = "wan";
+	}
+	kirkwood_ge00_switch_init(&rd88f6281_switch_plat_data, NO_IRQ);
+
+	kirkwood_sata_init(&rd88f6281_sata_data);
+	kirkwood_sdio_init(&rd88f6281_mvsdio_data);
+	kirkwood_uart0_init();
+}
+
+static int __init rd88f6281_pci_init(void)
+{
+	if (machine_is_rd88f6281())
+		kirkwood_pcie_init(KW_PCIE0);
+
+	return 0;
+}
+subsys_initcall(rd88f6281_pci_init);
+
+MACHINE_START(RD88F6281, "Marvell RD-88F6281 Reference Board")
+	/* Maintainer: Saeed Bishara <saeed@marvell.com> */
+	.atag_offset	= 0x100,
+	.init_machine	= rd88f6281_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.init_time	= kirkwood_timer_init,
+	.restart	= kirkwood_restart,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
new file mode 100644
index 00000000..55b68fa3
--- /dev/null
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -0,0 +1,161 @@
+/*
+ * arch/arm/mach-kirkwood/sheevaplug-setup.c
+ *
+ * Marvell SheevaPlug Reference Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <linux/platform_data/mmc-mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition sheevaplug_nand_parts[] = {
+	{
+		.name = "u-boot",
+		.offset = 0,
+		.size = SZ_1M
+	}, {
+		.name = "uImage",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_4M
+	}, {
+		.name = "root",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL
+	},
+};
+
+static struct mv643xx_eth_platform_data sheevaplug_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv_sata_platform_data sheeva_esata_sata_data = {
+	.n_ports	= 2,
+};
+
+static struct mvsdio_platform_data sheevaplug_mvsdio_data = {
+	/* unfortunately the CD signal has not been connected */
+};
+
+static struct mvsdio_platform_data sheeva_esata_mvsdio_data = {
+	.gpio_write_protect = 44, /* MPP44 used as SD write protect */
+	.gpio_card_detect = 47,	  /* MPP47 used as SD card detect */
+};
+
+static struct gpio_led sheevaplug_led_pins[] = {
+	{
+		.name			= "plug:red:misc",
+		.default_trigger	= "none",
+		.gpio			= 46,
+		.active_low		= 1,
+	},
+	{
+		.name			= "plug:green:health",
+		.default_trigger	= "default-on",
+		.gpio			= 49,
+		.active_low		= 1,
+	},
+};
+
+static struct gpio_led_platform_data sheevaplug_led_data = {
+	.leds		= sheevaplug_led_pins,
+	.num_leds	= ARRAY_SIZE(sheevaplug_led_pins),
+};
+
+static struct platform_device sheevaplug_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &sheevaplug_led_data,
+	}
+};
+
+static unsigned int sheevaplug_mpp_config[] __initdata = {
+	MPP29_GPIO,	/* USB Power Enable */
+	MPP46_GPIO,	/* LED Red */
+	MPP49_GPIO,	/* LED */
+	0
+};
+
+static unsigned int sheeva_esata_mpp_config[] __initdata = {
+	MPP29_GPIO,	/* USB Power Enable */
+	MPP44_GPIO,	/* SD Write Protect */
+	MPP47_GPIO,	/* SD Card Detect */
+	MPP49_GPIO,	/* LED Green */
+	0
+};
+
+static void __init sheevaplug_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+
+	/* setup gpio pin select */
+	if (machine_is_esata_sheevaplug())
+		kirkwood_mpp_conf(sheeva_esata_mpp_config);
+	else
+		kirkwood_mpp_conf(sheevaplug_mpp_config);
+
+	kirkwood_uart0_init();
+	kirkwood_nand_init(ARRAY_AND_SIZE(sheevaplug_nand_parts), 25);
+
+	if (gpio_request(29, "USB Power Enable") != 0 ||
+	    gpio_direction_output(29, 1) != 0)
+		pr_err("can't set up GPIO 29 (USB Power Enable)\n");
+	kirkwood_ehci_init();
+
+	kirkwood_ge00_init(&sheevaplug_ge00_data);
+
+	/* honor lower power consumption for plugs with out eSATA */
+	if (machine_is_esata_sheevaplug())
+		kirkwood_sata_init(&sheeva_esata_sata_data);
+
+	/* enable sd wp and sd cd on plugs with esata */
+	if (machine_is_esata_sheevaplug())
+		kirkwood_sdio_init(&sheeva_esata_mvsdio_data);
+	else
+		kirkwood_sdio_init(&sheevaplug_mvsdio_data);
+
+	platform_device_register(&sheevaplug_leds);
+}
+
+#ifdef CONFIG_MACH_SHEEVAPLUG
+MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
+	/* Maintainer: shadi Ammouri <shadi@marvell.com> */
+	.atag_offset	= 0x100,
+	.init_machine	= sheevaplug_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.init_time	= kirkwood_timer_init,
+	.restart	= kirkwood_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_ESATA_SHEEVAPLUG
+MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board")
+	.atag_offset	= 0x100,
+	.init_machine	= sheevaplug_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.init_time	= kirkwood_timer_init,
+	.restart	= kirkwood_restart,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c
new file mode 100644
index 00000000..8736f8c9
--- /dev/null
+++ b/arch/arm/mach-kirkwood/t5325-setup.c
@@ -0,0 +1,216 @@
+/*
+ *
+ * HP t5325 Thin Client setup
+ *
+ * Copyright (C) 2010  Martin Michlmayr <tbm@cyrius.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <sound/alc5623.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition hp_t5325_partitions[] = {
+	{
+		.name		= "u-boot env",
+		.size		= SZ_64K,
+		.offset		= SZ_512K + SZ_256K,
+	},
+	{
+		.name		= "permanent u-boot env",
+		.size		= SZ_64K,
+		.offset		= MTDPART_OFS_APPEND,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "HP env",
+		.size		= SZ_64K,
+		.offset		= MTDPART_OFS_APPEND,
+	},
+	{
+		.name		= "u-boot",
+		.size		= SZ_512K,
+		.offset		= 0,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "SSD firmware",
+		.size		= SZ_256K,
+		.offset		= SZ_512K,
+	},
+};
+
+static const struct flash_platform_data hp_t5325_flash = {
+	.type		= "mx25l8005",
+	.name		= "spi_flash",
+	.parts		= hp_t5325_partitions,
+	.nr_parts	= ARRAY_SIZE(hp_t5325_partitions),
+};
+
+static struct spi_board_info __initdata hp_t5325_spi_slave_info[] = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &hp_t5325_flash,
+		.irq		= -1,
+	},
+};
+
+static struct mv643xx_eth_platform_data hp_t5325_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv_sata_platform_data hp_t5325_sata_data = {
+	.n_ports	= 2,
+};
+
+static struct gpio_keys_button hp_t5325_buttons[] = {
+	{
+		.code		= KEY_POWER,
+		.gpio		= 45,
+		.desc		= "Power",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data hp_t5325_button_data = {
+	.buttons	= hp_t5325_buttons,
+	.nbuttons	= ARRAY_SIZE(hp_t5325_buttons),
+};
+
+static struct platform_device hp_t5325_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &hp_t5325_button_data,
+	}
+};
+
+static struct platform_device hp_t5325_audio_device = {
+	.name		= "t5325-audio",
+	.id		= -1,
+};
+
+static unsigned int hp_t5325_mpp_config[] __initdata = {
+	MPP0_NF_IO2,
+	MPP1_SPI_MOSI,
+	MPP2_SPI_SCK,
+	MPP3_SPI_MISO,
+	MPP4_NF_IO6,
+	MPP5_NF_IO7,
+	MPP6_SYSRST_OUTn,
+	MPP7_SPI_SCn,
+	MPP8_TW0_SDA,
+	MPP9_TW0_SCK,
+	MPP10_UART0_TXD,
+	MPP11_UART0_RXD,
+	MPP12_SD_CLK,
+	MPP13_GPIO,
+	MPP14_GPIO,
+	MPP15_GPIO,
+	MPP16_GPIO,
+	MPP17_GPIO,
+	MPP18_NF_IO0,
+	MPP19_NF_IO1,
+	MPP20_GPIO,
+	MPP21_GPIO,
+	MPP22_GPIO,
+	MPP23_GPIO,
+	MPP32_GPIO,
+	MPP33_GE1_TXCTL,
+	MPP39_AU_I2SBCLK,
+	MPP40_AU_I2SDO,
+	MPP43_AU_I2SDI,
+	MPP41_AU_I2SLRCLK,
+	MPP42_AU_I2SMCLK,
+	MPP45_GPIO,		/* Power button */
+	MPP48_GPIO,		/* Board power off */
+	0
+};
+
+static struct alc5623_platform_data alc5621_data = {
+	.add_ctrl = 0x3700,
+	.jack_det_ctrl = 0x4810,
+};
+
+static struct i2c_board_info i2c_board_info[] __initdata = {
+	{
+		I2C_BOARD_INFO("alc5621", 0x1a),
+		.platform_data = &alc5621_data,
+	},
+};
+
+#define HP_T5325_GPIO_POWER_OFF		48
+
+static void hp_t5325_power_off(void)
+{
+	gpio_set_value(HP_T5325_GPIO_POWER_OFF, 1);
+}
+
+static void __init hp_t5325_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(hp_t5325_mpp_config);
+
+	kirkwood_uart0_init();
+	spi_register_board_info(hp_t5325_spi_slave_info,
+				ARRAY_SIZE(hp_t5325_spi_slave_info));
+	kirkwood_spi_init();
+	kirkwood_i2c_init();
+	kirkwood_ge00_init(&hp_t5325_ge00_data);
+	kirkwood_sata_init(&hp_t5325_sata_data);
+	kirkwood_ehci_init();
+	platform_device_register(&hp_t5325_button_device);
+	platform_device_register(&hp_t5325_audio_device);
+
+	i2c_register_board_info(0, i2c_board_info, ARRAY_SIZE(i2c_board_info));
+	kirkwood_audio_init();
+
+	if (gpio_request(HP_T5325_GPIO_POWER_OFF, "power-off") == 0 &&
+	    gpio_direction_output(HP_T5325_GPIO_POWER_OFF, 0) == 0)
+		pm_power_off = hp_t5325_power_off;
+	else
+		pr_err("t5325: failed to configure power-off GPIO\n");
+}
+
+static int __init hp_t5325_pci_init(void)
+{
+	if (machine_is_t5325())
+		kirkwood_pcie_init(KW_PCIE0);
+
+	return 0;
+}
+subsys_initcall(hp_t5325_pci_init);
+
+MACHINE_START(T5325, "HP t5325 Thin Client")
+	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
+	.atag_offset	= 0x100,
+	.init_machine	= hp_t5325_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.init_time	= kirkwood_timer_init,
+	.restart	= kirkwood_restart,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
new file mode 100644
index 00000000..e1267d6b
--- /dev/null
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -0,0 +1,142 @@
+/*
+ *
+ * QNAP TS-11x/TS-21x Turbo NAS Board Setup
+ *
+ * Copyright (C) 2009  Martin Michlmayr <tbm@cyrius.com>
+ * Copyright (C) 2008  Byron Bradley <byron.bbradley@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+#include "tsx1x-common.h"
+
+static struct i2c_board_info __initdata qnap_ts219_i2c_rtc = {
+	I2C_BOARD_INFO("s35390a", 0x30),
+};
+
+static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv_sata_platform_data qnap_ts219_sata_data = {
+	.n_ports	= 2,
+};
+
+static struct gpio_keys_button qnap_ts219_buttons[] = {
+	{
+		.code		= KEY_COPY,
+		.gpio		= 15,
+		.desc		= "USB Copy",
+		.active_low	= 1,
+	},
+	{
+		.code		= KEY_RESTART,
+		.gpio		= 16,
+		.desc		= "Reset",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data qnap_ts219_button_data = {
+	.buttons	= qnap_ts219_buttons,
+	.nbuttons	= ARRAY_SIZE(qnap_ts219_buttons),
+};
+
+static struct platform_device qnap_ts219_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &qnap_ts219_button_data,
+	}
+};
+
+static unsigned int qnap_ts219_mpp_config[] __initdata = {
+	MPP0_SPI_SCn,
+	MPP1_SPI_MOSI,
+	MPP2_SPI_SCK,
+	MPP3_SPI_MISO,
+	MPP4_SATA1_ACTn,
+	MPP5_SATA0_ACTn,
+	MPP8_TW0_SDA,
+	MPP9_TW0_SCK,
+	MPP10_UART0_TXD,
+	MPP11_UART0_RXD,
+	MPP13_UART1_TXD,	/* PIC controller */
+	MPP14_UART1_RXD,	/* PIC controller */
+	MPP15_GPIO,		/* USB Copy button (on devices with 88F6281) */
+	MPP16_GPIO,		/* Reset button (on devices with 88F6281) */
+	MPP36_GPIO,		/* RAM: 0: 256 MB, 1: 512 MB */
+	MPP37_GPIO,		/* Reset button (on devices with 88F6282) */
+	MPP43_GPIO,		/* USB Copy button (on devices with 88F6282) */
+	MPP44_GPIO,		/* Board ID: 0: TS-11x, 1: TS-21x */
+	0
+};
+
+static void __init qnap_ts219_init(void)
+{
+	u32 dev, rev;
+
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(qnap_ts219_mpp_config);
+
+	kirkwood_uart0_init();
+	kirkwood_uart1_init(); /* A PIC controller is connected here. */
+	qnap_tsx1x_register_flash();
+	kirkwood_i2c_init();
+	i2c_register_board_info(0, &qnap_ts219_i2c_rtc, 1);
+
+	kirkwood_pcie_id(&dev, &rev);
+	if (dev == MV88F6282_DEV_ID) {
+		qnap_ts219_buttons[0].gpio = 43; /* USB Copy button */
+		qnap_ts219_buttons[1].gpio = 37; /* Reset button */
+		qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
+	}
+
+	kirkwood_ge00_init(&qnap_ts219_ge00_data);
+	kirkwood_sata_init(&qnap_ts219_sata_data);
+	kirkwood_ehci_init();
+	platform_device_register(&qnap_ts219_button_device);
+
+	pm_power_off = qnap_tsx1x_power_off;
+
+}
+
+static int __init ts219_pci_init(void)
+{
+	if (machine_is_ts219())
+		kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
+
+	return 0;
+}
+subsys_initcall(ts219_pci_init);
+
+MACHINE_START(TS219, "QNAP TS-119/TS-219")
+	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
+	.atag_offset	= 0x100,
+	.init_machine	= qnap_ts219_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.init_time	= kirkwood_timer_init,
+	.restart	= kirkwood_restart,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
new file mode 100644
index 00000000..81d58580
--- /dev/null
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -0,0 +1,186 @@
+/*
+ *
+ * QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS Board Setup
+ *
+ * Copyright (C) 2009-2010  Martin Michlmayr <tbm@cyrius.com>
+ * Copyright (C) 2008  Byron Bradley <byron.bbradley@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+#include "tsx1x-common.h"
+
+/* for the PCIe reset workaround */
+#include <plat/pcie.h>
+
+
+#define QNAP_TS41X_JUMPER_JP1	45
+
+static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = {
+	I2C_BOARD_INFO("s35390a", 0x30),
+};
+
+static struct mv643xx_eth_platform_data qnap_ts41x_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv643xx_eth_platform_data qnap_ts41x_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv_sata_platform_data qnap_ts41x_sata_data = {
+	.n_ports	= 2,
+};
+
+static struct gpio_keys_button qnap_ts41x_buttons[] = {
+	{
+		.code		= KEY_COPY,
+		.gpio		= 43,
+		.desc		= "USB Copy",
+		.active_low	= 1,
+	},
+	{
+		.code		= KEY_RESTART,
+		.gpio		= 37,
+		.desc		= "Reset",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data qnap_ts41x_button_data = {
+	.buttons	= qnap_ts41x_buttons,
+	.nbuttons	= ARRAY_SIZE(qnap_ts41x_buttons),
+};
+
+static struct platform_device qnap_ts41x_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &qnap_ts41x_button_data,
+	}
+};
+
+static unsigned int qnap_ts41x_mpp_config[] __initdata = {
+	MPP0_SPI_SCn,
+	MPP1_SPI_MOSI,
+	MPP2_SPI_SCK,
+	MPP3_SPI_MISO,
+	MPP6_SYSRST_OUTn,
+	MPP7_PEX_RST_OUTn,
+	MPP8_TW0_SDA,
+	MPP9_TW0_SCK,
+	MPP10_UART0_TXD,
+	MPP11_UART0_RXD,
+	MPP13_UART1_TXD,	/* PIC controller */
+	MPP14_UART1_RXD,	/* PIC controller */
+	MPP15_SATA0_ACTn,
+	MPP16_SATA1_ACTn,
+	MPP20_GE1_TXD0,
+	MPP21_GE1_TXD1,
+	MPP22_GE1_TXD2,
+	MPP23_GE1_TXD3,
+	MPP24_GE1_RXD0,
+	MPP25_GE1_RXD1,
+	MPP26_GE1_RXD2,
+	MPP27_GE1_RXD3,
+	MPP30_GE1_RXCTL,
+	MPP31_GE1_RXCLK,
+	MPP32_GE1_TCLKOUT,
+	MPP33_GE1_TXCTL,
+	MPP36_GPIO,		/* RAM: 0: 256 MB, 1: 512 MB */
+	MPP37_GPIO,		/* Reset button */
+	MPP43_GPIO,		/* USB Copy button */
+	MPP44_GPIO,		/* Board ID: 0: TS-419U, 1: TS-419 */
+	MPP45_GPIO,		/* JP1: 0: LCD, 1: serial console */
+	MPP46_GPIO,		/* External SATA HDD1 error indicator */
+	MPP47_GPIO,		/* External SATA HDD2 error indicator */
+	MPP48_GPIO,		/* External SATA HDD3 error indicator */
+	MPP49_GPIO,		/* External SATA HDD4 error indicator */
+	0
+};
+
+static void __init qnap_ts41x_init(void)
+{
+	u32 dev, rev;
+
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(qnap_ts41x_mpp_config);
+
+	kirkwood_uart0_init();
+	kirkwood_uart1_init(); /* A PIC controller is connected here. */
+	qnap_tsx1x_register_flash();
+	kirkwood_i2c_init();
+	i2c_register_board_info(0, &qnap_ts41x_i2c_rtc, 1);
+
+	kirkwood_pcie_id(&dev, &rev);
+	if (dev == MV88F6282_DEV_ID) {
+		qnap_ts41x_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
+		qnap_ts41x_ge01_data.phy_addr = MV643XX_ETH_PHY_ADDR(1);
+	}
+	kirkwood_ge00_init(&qnap_ts41x_ge00_data);
+	kirkwood_ge01_init(&qnap_ts41x_ge01_data);
+
+	kirkwood_sata_init(&qnap_ts41x_sata_data);
+	kirkwood_ehci_init();
+	platform_device_register(&qnap_ts41x_button_device);
+
+	pm_power_off = qnap_tsx1x_power_off;
+
+	if (gpio_request(QNAP_TS41X_JUMPER_JP1, "JP1") == 0)
+		gpio_export(QNAP_TS41X_JUMPER_JP1, 0);
+}
+
+static int __init ts41x_pci_init(void)
+{
+	if (machine_is_ts41x()) {
+		u32 dev, rev;
+
+		/*
+		 * Without this explicit reset, the PCIe SATA controller
+		 * (Marvell 88sx7042/sata_mv) is known to stop working
+		 * after a few minutes.
+		 */
+		orion_pcie_reset(PCIE_VIRT_BASE);
+
+		kirkwood_pcie_id(&dev, &rev);
+		if (dev == MV88F6282_DEV_ID)
+			kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
+		else
+			kirkwood_pcie_init(KW_PCIE0);
+	}
+	return 0;
+}
+subsys_initcall(ts41x_pci_init);
+
+MACHINE_START(TS41X, "QNAP TS-41x")
+	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
+	.atag_offset	= 0x100,
+	.init_machine	= qnap_ts41x_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.init_time	= kirkwood_timer_init,
+	.restart	= kirkwood_restart,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/tsx1x-common.c b/arch/arm/mach-kirkwood/tsx1x-common.c
new file mode 100644
index 00000000..cec87cef
--- /dev/null
+++ b/arch/arm/mach-kirkwood/tsx1x-common.c
@@ -0,0 +1,113 @@
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/serial_reg.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "tsx1x-common.h"
+
+/*
+ * QNAP TS-x1x Boards flash
+ */
+
+/****************************************************************************
+ * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the
+ *     partitions on the device because we want to keep compatibility with
+ *     the QNAP firmware.
+ * Layout as used by QNAP:
+ *  0x00000000-0x00080000 : "U-Boot"
+ *  0x00200000-0x00400000 : "Kernel"
+ *  0x00400000-0x00d00000 : "RootFS"
+ *  0x00d00000-0x01000000 : "RootFS2"
+ *  0x00080000-0x000c0000 : "U-Boot Config"
+ *  0x000c0000-0x00200000 : "NAS Config"
+ *
+ * We'll use "RootFS1" instead of "RootFS" to stay compatible with the layout
+ * used by the QNAP TS-109/TS-209.
+ *
+ ***************************************************************************/
+
+static struct mtd_partition qnap_tsx1x_partitions[] = {
+	{
+		.name		= "U-Boot",
+		.size		= 0x00080000,
+		.offset		= 0,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "Kernel",
+		.size		= 0x00200000,
+		.offset		= 0x00200000,
+	}, {
+		.name		= "RootFS1",
+		.size		= 0x00900000,
+		.offset		= 0x00400000,
+	}, {
+		.name		= "RootFS2",
+		.size		= 0x00300000,
+		.offset		= 0x00d00000,
+	}, {
+		.name		= "U-Boot Config",
+		.size		= 0x00040000,
+		.offset		= 0x00080000,
+	}, {
+		.name		= "NAS Config",
+		.size		= 0x00140000,
+		.offset		= 0x000c0000,
+	},
+};
+
+static const struct flash_platform_data qnap_tsx1x_flash = {
+	.type		= "m25p128",
+	.name		= "spi_flash",
+	.parts		= qnap_tsx1x_partitions,
+	.nr_parts	= ARRAY_SIZE(qnap_tsx1x_partitions),
+};
+
+static struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &qnap_tsx1x_flash,
+		.irq		= -1,
+		.max_speed_hz	= 20000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+	},
+};
+
+void __init qnap_tsx1x_register_flash(void)
+{
+	spi_register_board_info(qnap_tsx1x_spi_slave_info,
+				ARRAY_SIZE(qnap_tsx1x_spi_slave_info));
+	kirkwood_spi_init();
+}
+
+
+/*****************************************************************************
+ * QNAP TS-x1x specific power off method via UART1-attached PIC
+ ****************************************************************************/
+
+#define UART1_REG(x)	(UART1_VIRT_BASE + ((UART_##x) << 2))
+
+void qnap_tsx1x_power_off(void)
+{
+	/* 19200 baud divisor */
+	const unsigned divisor = ((kirkwood_tclk + (8 * 19200)) / (16 * 19200));
+
+	pr_info("%s: triggering power-off...\n", __func__);
+
+	/* hijack UART1 and reset into sane state (19200,8n1) */
+	writel(0x83, UART1_REG(LCR));
+	writel(divisor & 0xff, UART1_REG(DLL));
+	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
+	writel(0x03, UART1_REG(LCR));
+	writel(0x00, UART1_REG(IER));
+	writel(0x00, UART1_REG(FCR));
+	writel(0x00, UART1_REG(MCR));
+
+	/* send the power-off command 'A' to PIC */
+	writel('A', UART1_REG(TX));
+}
+
diff --git a/arch/arm/mach-kirkwood/tsx1x-common.h b/arch/arm/mach-kirkwood/tsx1x-common.h
new file mode 100644
index 00000000..7fa03736
--- /dev/null
+++ b/arch/arm/mach-kirkwood/tsx1x-common.h
@@ -0,0 +1,7 @@
+#ifndef __ARCH_KIRKWOOD_TSX1X_COMMON_H
+#define __ARCH_KIRKWOOD_TSX1X_COMMON_H
+
+extern void __init qnap_tsx1x_register_flash(void);
+extern void qnap_tsx1x_power_off(void);
+
+#endif