Initial file dump from open source releaseHEADmaster

1 files changed, 116 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
new file mode 100644
index 00000000..37be532f
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -0,0 +1,116 @@
+/dts-v1/;
+/include/ "imx28.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX28 module";
+	compatible = "karo,tx28", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a
+					     &mmc0_cd_cfg
+					     &mmc0_sck_cfg>;
+				bus-width = <4>;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x40a3 /* MX28_PAD_ENET0_RXD3__GPIO_4_10 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				mac0_pins_gpio: mac0-gpio-mode@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x4003 /* MX28_PAD_ENET0_MDC__GPIO_4_0 */
+						0x4013 /* MX28_PAD_ENET0_MDIO__GPIO_4_1 */
+						0x4023 /* MX28_PAD_ENET0_RX_EN__GPIO_4_2 */
+						0x4033 /* MX28_PAD_ENET0_RXD0__GPIO_4_3 */
+						0x4043 /* MX28_PAD_ENET0_RXD1__GPIO_4_4 */
+						0x4063 /* MX28_PAD_ENET0_TX_EN__GPIO_4_6 */
+						0x4073 /* MX28_PAD_ENET0_TXD0__GPIO_4_7 */
+						0x4083 /* MX28_PAD_ENET0_TXD1__GPIO_4_8 */
+						0x4103 /* MX28_PAD_ENET_CLK__GPIO_4_16 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			i2c0: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins_a>;
+				status = "okay";
+
+				ds1339: rtc@68 {
+					compatible = "mxim,ds1339";
+					reg = <0x68>;
+				};
+			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm0_pins_a>;
+				status = "okay";
+			};
+
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_4pins_a>;
+				status = "okay";
+			};
+
+			auart1: serial@8006c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart1_pins_a>;
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default", "gpio_mode";
+			pinctrl-0 = <&mac0_pins_a>;
+			pinctrl-1 = <&mac0_pins_gpio>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user {
+			label = "Heartbeat";
+			gpios = <&gpio4 10 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+};