path: root/driverlib/usb.h

//*****************************************************************************
//
// usb.h - Prototypes for the USB Interface Driver.
//
// Copyright (c) 2007-2014 Texas Instruments Incorporated.  All rights reserved.
// Software License Agreement
// 
//   Redistribution and use in source and binary forms, with or without
//   modification, are permitted provided that the following conditions
//   are met:
// 
//   Redistributions of source code must retain the above copyright
//   notice, this list of conditions and the following disclaimer.
// 
//   Redistributions in binary form must reproduce the above copyright
//   notice, this list of conditions and the following disclaimer in the
//   documentation and/or other materials provided with the  
//   distribution.
// 
//   Neither the name of Texas Instruments Incorporated nor the names of
//   its contributors may be used to endorse or promote products derived
//   from this software without specific prior written permission.
// 
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// 
// This is part of revision 2.1.0.12573 of the Tiva Peripheral Driver Library.
//
//*****************************************************************************

#ifndef __DRIVERLIB_USB_H__
#define __DRIVERLIB_USB_H__

//*****************************************************************************
//
// If building with a C++ compiler, make all of the definitions in this header
// have a C binding.
//
//*****************************************************************************
#ifdef __cplusplus
extern "C"
{
#endif

//*****************************************************************************
//
// The following are values that can be passed to USBIntEnableControl() and
// USBIntDisableControl() as the ui32Flags parameter, and are returned from
// USBIntStatusControl().
//
//*****************************************************************************
#define USB_INTCTRL_ALL         0x000003FF  // All control interrupt sources
#define USB_INTCTRL_STATUS      0x000000FF  // Status Interrupts
#define USB_INTCTRL_VBUS_ERR    0x00000080  // VBUS Error
#define USB_INTCTRL_SESSION     0x00000040  // Session Start Detected
#define USB_INTCTRL_SESSION_END 0x00000040  // Session End Detected
#define USB_INTCTRL_DISCONNECT  0x00000020  // Disconnect Detected
#define USB_INTCTRL_CONNECT     0x00000010  // Device Connect Detected
#define USB_INTCTRL_SOF         0x00000008  // Start of Frame Detected
#define USB_INTCTRL_BABBLE      0x00000004  // Babble signaled
#define USB_INTCTRL_RESET       0x00000004  // Reset signaled
#define USB_INTCTRL_RESUME      0x00000002  // Resume detected
#define USB_INTCTRL_SUSPEND     0x00000001  // Suspend detected
#define USB_INTCTRL_MODE_DETECT 0x00000200  // Mode value valid
#define USB_INTCTRL_POWER_FAULT 0x00000100  // Power Fault detected

//*****************************************************************************
//
// The following are values that can be passed to USBIntEnableEndpoint() and
// USBIntDisableEndpoint() as the ui32Flags parameter, and are returned from
// USBIntStatusEndpoint().
//
//*****************************************************************************
#define USB_INTEP_ALL           0xFFFFFFFF  // Host IN Interrupts
#define USB_INTEP_HOST_IN       0xFFFE0000  // Host IN Interrupts
#define USB_INTEP_HOST_IN_15    0x80000000  // Endpoint 15 Host IN Interrupt
#define USB_INTEP_HOST_IN_14    0x40000000  // Endpoint 14 Host IN Interrupt
#define USB_INTEP_HOST_IN_13    0x20000000  // Endpoint 13 Host IN Interrupt
#define USB_INTEP_HOST_IN_12    0x10000000  // Endpoint 12 Host IN Interrupt
#define USB_INTEP_HOST_IN_11    0x08000000  // Endpoint 11 Host IN Interrupt
#define USB_INTEP_HOST_IN_10    0x04000000  // Endpoint 10 Host IN Interrupt
#define USB_INTEP_HOST_IN_9     0x02000000  // Endpoint 9 Host IN Interrupt
#define USB_INTEP_HOST_IN_8     0x01000000  // Endpoint 8 Host IN Interrupt
#define USB_INTEP_HOST_IN_7     0x00800000  // Endpoint 7 Host IN Interrupt
#define USB_INTEP_HOST_IN_6     0x00400000  // Endpoint 6 Host IN Interrupt
#define USB_INTEP_HOST_IN_5     0x00200000  // Endpoint 5 Host IN Interrupt
#define USB_INTEP_HOST_IN_4     0x00100000  // Endpoint 4 Host IN Interrupt
#define USB_INTEP_HOST_IN_3     0x00080000  // Endpoint 3 Host IN Interrupt
#define USB_INTEP_HOST_IN_2     0x00040000  // Endpoint 2 Host IN Interrupt
#define USB_INTEP_HOST_IN_1     0x00020000  // Endpoint 1 Host IN Interrupt

#define USB_INTEP_DEV_OUT       0xFFFE0000  // Device OUT Interrupts
#define USB_INTEP_DEV_OUT_15    0x80000000  // Endpoint 15 Device OUT Interrupt
#define USB_INTEP_DEV_OUT_14    0x40000000  // Endpoint 14 Device OUT Interrupt
#define USB_INTEP_DEV_OUT_13    0x20000000  // Endpoint 13 Device OUT Interrupt
#define USB_INTEP_DEV_OUT_12    0x10000000  // Endpoint 12 Device OUT Interrupt
#define USB_INTEP_DEV_OUT_11    0x08000000  // Endpoint 11 Device OUT Interrupt
#define USB_INTEP_DEV_OUT_10    0x04000000  // Endpoint 10 Device OUT Interrupt
#define USB_INTEP_DEV_OUT_9     0x02000000  // Endpoint 9 Device OUT Interrupt
#define USB_INTEP_DEV_OUT_8     0x01000000  // Endpoint 8 Device OUT Interrupt
#define USB_INTEP_DEV_OUT_7     0x00800000  // Endpoint 7 Device OUT Interrupt
#define USB_INTEP_DEV_OUT_6     0x00400000  // Endpoint 6 Device OUT Interrupt
#define USB_INTEP_DEV_OUT_5     0x00200000  // Endpoint 5 Device OUT Interrupt
#define USB_INTEP_DEV_OUT_4     0x00100000  // Endpoint 4 Device OUT Interrupt
#define USB_INTEP_DEV_OUT_3     0x00080000  // Endpoint 3 Device OUT Interrupt
#define USB_INTEP_DEV_OUT_2     0x00040000  // Endpoint 2 Device OUT Interrupt
#define USB_INTEP_DEV_OUT_1     0x00020000  // Endpoint 1 Device OUT Interrupt

#define USB_INTEP_HOST_OUT      0x0000FFFE  // Host OUT Interrupts
#define USB_INTEP_HOST_OUT_15   0x00008000  // Endpoint 15 Host OUT Interrupt
#define USB_INTEP_HOST_OUT_14   0x00004000  // Endpoint 14 Host OUT Interrupt
#define USB_INTEP_HOST_OUT_13   0x00002000  // Endpoint 13 Host OUT Interrupt
#define USB_INTEP_HOST_OUT_12   0x00001000  // Endpoint 12 Host OUT Interrupt
#define USB_INTEP_HOST_OUT_11   0x00000800  // Endpoint 11 Host OUT Interrupt
#define USB_INTEP_HOST_OUT_10   0x00000400  // Endpoint 10 Host OUT Interrupt
#define USB_INTEP_HOST_OUT_9    0x00000200  // Endpoint 9 Host OUT Interrupt
#define USB_INTEP_HOST_OUT_8    0x00000100  // Endpoint 8 Host OUT Interrupt
#define USB_INTEP_HOST_OUT_7    0x00000080  // Endpoint 7 Host OUT Interrupt
#define USB_INTEP_HOST_OUT_6    0x00000040  // Endpoint 6 Host OUT Interrupt
#define USB_INTEP_HOST_OUT_5    0x00000020  // Endpoint 5 Host OUT Interrupt
#define USB_INTEP_HOST_OUT_4    0x00000010  // Endpoint 4 Host OUT Interrupt
#define USB_INTEP_HOST_OUT_3    0x00000008  // Endpoint 3 Host OUT Interrupt
#define USB_INTEP_HOST_OUT_2    0x00000004  // Endpoint 2 Host OUT Interrupt
#define USB_INTEP_HOST_OUT_1    0x00000002  // Endpoint 1 Host OUT Interrupt

#define USB_INTEP_DEV_IN        0x0000FFFE  // Device IN Interrupts
#define USB_INTEP_DEV_IN_15     0x00008000  // Endpoint 15 Device IN Interrupt
#define USB_INTEP_DEV_IN_14     0x00004000  // Endpoint 14 Device IN Interrupt
#define USB_INTEP_DEV_IN_13     0x00002000  // Endpoint 13 Device IN Interrupt
#define USB_INTEP_DEV_IN_12     0x00001000  // Endpoint 12 Device IN Interrupt
#define USB_INTEP_DEV_IN_11     0x00000800  // Endpoint 11 Device IN Interrupt
#define USB_INTEP_DEV_IN_10     0x00000400  // Endpoint 10 Device IN Interrupt
#define USB_INTEP_DEV_IN_9      0x00000200  // Endpoint 9 Device IN Interrupt
#define USB_INTEP_DEV_IN_8      0x00000100  // Endpoint 8 Device IN Interrupt
#define USB_INTEP_DEV_IN_7      0x00000080  // Endpoint 7 Device IN Interrupt
#define USB_INTEP_DEV_IN_6      0x00000040  // Endpoint 6 Device IN Interrupt
#define USB_INTEP_DEV_IN_5      0x00000020  // Endpoint 5 Device IN Interrupt
#define USB_INTEP_DEV_IN_4      0x00000010  // Endpoint 4 Device IN Interrupt
#define USB_INTEP_DEV_IN_3      0x00000008  // Endpoint 3 Device IN Interrupt
#define USB_INTEP_DEV_IN_2      0x00000004  // Endpoint 2 Device IN Interrupt
#define USB_INTEP_DEV_IN_1      0x00000002  // Endpoint 1 Device IN Interrupt

#define USB_INTEP_0             0x00000001  // Endpoint 0 Interrupt

//*****************************************************************************
//
// The following are values that are returned from USBSpeedGet().
//
//*****************************************************************************
#define USB_UNDEF_SPEED         0x80000000  // Current speed is undefined
#define USB_HIGH_SPEED          0x00000002  // Current speed is High Speed
#define USB_FULL_SPEED          0x00000001  // Current speed is Full Speed
#define USB_LOW_SPEED           0x00000000  // Current speed is Low Speed

//*****************************************************************************
//
// The following are values that are returned from USBEndpointStatus().  The
// USB_HOST_* values are used when the USB controller is in host mode and the
// USB_DEV_* values are used when the USB controller is in device mode.
//
//*****************************************************************************
#define USB_HOST_IN_STATUS      0x114F0000  // Mask of all host IN interrupts
#define USB_HOST_IN_PID_ERROR   0x10000000  // Stall on this endpoint received
#define USB_HOST_IN_NOT_COMP    0x01000000  // Device failed to respond
#define USB_HOST_IN_STALL       0x00400000  // Stall on this endpoint received
#define USB_HOST_IN_DATA_ERROR  0x00080000  // CRC or bit-stuff error
                                            // (ISOC Mode)
#define USB_HOST_IN_NAK_TO      0x00080000  // NAK received for more than the
                                            // specified timeout period
#define USB_HOST_IN_ERROR       0x00040000  // Failed to communicate with a
                                            // device
#define USB_HOST_IN_FIFO_FULL   0x00020000  // RX FIFO full
#define USB_HOST_IN_PKTRDY      0x00010000  // Data packet ready
#define USB_HOST_OUT_STATUS     0x000000A7  // Mask of all host OUT interrupts
#define USB_HOST_OUT_NAK_TO     0x00000080  // NAK received for more than the
                                            // specified timeout period
#define USB_HOST_OUT_NOT_COMP   0x00000080  // No response from device
                                            // (ISOC mode)
#define USB_HOST_OUT_STALL      0x00000020  // Stall on this endpoint received
#define USB_HOST_OUT_ERROR      0x00000004  // Failed to communicate with a
                                            // device
#define USB_HOST_OUT_FIFO_NE    0x00000002  // TX FIFO is not empty
#define USB_HOST_OUT_PKTPEND    0x00000001  // Transmit still being transmitted
#define USB_HOST_EP0_NAK_TO     0x00000080  // NAK received for more than the
                                            // specified timeout period
#define USB_HOST_EP0_STATUS     0x00000040  // This was a status packet
#define USB_HOST_EP0_ERROR      0x00000010  // Failed to communicate with a
                                            // device
#define USB_HOST_EP0_RX_STALL   0x00000004  // Stall on this endpoint received
#define USB_HOST_EP0_RXPKTRDY   0x00000001  // Receive data packet ready
#define USB_DEV_RX_PID_ERROR    0x01000000  // PID error in isochronous
                                            // transfer
#define USB_DEV_RX_SENT_STALL   0x00400000  // Stall was sent on this endpoint
#define USB_DEV_RX_DATA_ERROR   0x00080000  // CRC error on the data
#define USB_DEV_RX_OVERRUN      0x00040000  // OUT packet was not loaded due to
                                            // a full FIFO
#define USB_DEV_RX_FIFO_FULL    0x00020000  // RX FIFO full
#define USB_DEV_RX_PKT_RDY      0x00010000  // Data packet ready
#define USB_DEV_TX_NOT_COMP     0x00000080  // Large packet split up, more data
                                            // to come
#define USB_DEV_TX_SENT_STALL   0x00000020  // Stall was sent on this endpoint
#define USB_DEV_TX_UNDERRUN     0x00000004  // IN received with no data ready
#define USB_DEV_TX_FIFO_NE      0x00000002  // The TX FIFO is not empty
#define USB_DEV_TX_TXPKTRDY     0x00000001  // Transmit still being transmitted
#define USB_DEV_EP0_SETUP_END   0x00000010  // Control transaction ended before
                                            // Data End seen
#define USB_DEV_EP0_SENT_STALL  0x00000004  // Stall was sent on this endpoint
#define USB_DEV_EP0_IN_PKTPEND  0x00000002  // Transmit data packet pending
#define USB_DEV_EP0_OUT_PKTRDY  0x00000001  // Receive data packet ready

//*****************************************************************************
//
// The following are values that can be passed to USBHostEndpointConfig() and
// USBDevEndpointConfigSet() as the ui32Flags parameter.
//
//*****************************************************************************
#define USB_EP_AUTO_SET         0x00000001  // Auto set feature enabled
#define USB_EP_AUTO_REQUEST     0x00000002  // Auto request feature enabled
#define USB_EP_AUTO_CLEAR       0x00000004  // Auto clear feature enabled
#define USB_EP_DMA_MODE_0       0x00000008  // Enable DMA access using mode 0
#define USB_EP_DMA_MODE_1       0x00000010  // Enable DMA access using mode 1
#define USB_EP_DIS_NYET         0x00000020  // Disable NYET response for
                                            // high-speed Bulk and Interrupt
                                            // endpoints in device mode.
#define USB_EP_MODE_ISOC        0x00000000  // Isochronous endpoint
#define USB_EP_MODE_BULK        0x00000100  // Bulk endpoint
#define USB_EP_MODE_INT         0x00000200  // Interrupt endpoint
#define USB_EP_MODE_CTRL        0x00000300  // Control endpoint
#define USB_EP_MODE_MASK        0x00000300  // Mode Mask
#define USB_EP_SPEED_LOW        0x00000000  // Low Speed
#define USB_EP_SPEED_FULL       0x00001000  // Full Speed
#define USB_EP_SPEED_HIGH       0x00004000  // High Speed
#define USB_EP_HOST_IN          0x00000000  // Host IN endpoint
#define USB_EP_HOST_OUT         0x00002000  // Host OUT endpoint
#define USB_EP_DEV_IN           0x00002000  // Device IN endpoint
#define USB_EP_DEV_OUT          0x00000000  // Device OUT endpoint

//*****************************************************************************
//
// The following are values that can be passed to USBHostPwrConfig() as the
// ui32Flags parameter.
//
//*****************************************************************************
#define USB_HOST_PWRFLT_LOW     0x00000010
#define USB_HOST_PWRFLT_HIGH    0x00000030
#define USB_HOST_PWRFLT_EP_NONE 0x00000000
#define USB_HOST_PWRFLT_EP_TRI  0x00000140
#define USB_HOST_PWRFLT_EP_LOW  0x00000240
#define USB_HOST_PWRFLT_EP_HIGH 0x00000340
#define USB_HOST_PWREN_MAN_LOW  0x00000000
#define USB_HOST_PWREN_MAN_HIGH 0x00000001
#define USB_HOST_PWREN_AUTOLOW  0x00000002
#define USB_HOST_PWREN_AUTOHIGH 0x00000003
#define USB_HOST_PWREN_FILTER   0x00010000

//*****************************************************************************
//
// The following are the valid values that can be passed to the
// USBHostLPMConfig() function in the ui32Config parameter.
//
//*****************************************************************************
#define USB_HOST_LPM_RMTWAKE    0x00000100
#define USB_HOST_LPM_L1         0x00000001

//*****************************************************************************
//
// The following are the valid values that can be passed to the
// USBDevLPMConfig() function in the ui32Config parameter.
//
//*****************************************************************************
#define USB_DEV_LPM_NAK         0x00000010
#define USB_DEV_LPM_NONE        0x00000000
#define USB_DEV_LPM_EN          0x0000000c
#define USB_DEV_LPM_EXTONLY     0x00000004

//*****************************************************************************
//
// The following are the valid values that are returned from the
// USBLPMLinkStateGet() function.
//
//*****************************************************************************
#define USB_DEV_LPM_LS_RMTWAKE  0x00000100
#define USB_DEV_LPM_LS_L1       0x00000001

//*****************************************************************************
//
// The following are the valid values that are passed to the USBLPMIntEnable()
// or USBLPMIntDisable() functions or are returned from the USBLPMIntStatus()
// function.
//
//*****************************************************************************
#define USB_INTLPM_ERROR        0x00000020
#define USB_INTLPM_RESUME       0x00000010
#define USB_INTLPM_INCOMPLETE   0x00000008
#define USB_INTLPM_ACK          0x00000004
#define USB_INTLPM_NYET         0x00000002
#define USB_INTLPM_STALL        0x00000001

//*****************************************************************************
//
// The following are the valid values that are passed to the USBClockEnable()
// functions.
//
//*****************************************************************************
#define USB_CLOCK_INTERNAL      0x00000200
#define USB_CLOCK_EXTERNAL      0x00000300

//*****************************************************************************
//
// The configuration options used with the USBULPIConfig() API.
//
//*****************************************************************************
#define USB_ULPI_EXTVBUS        0x00000001
#define USB_ULPI_EXTVBUS_IND    0x00000002

//*****************************************************************************
//
// The following are special values that can be passed to
// USBHostEndpointConfig() as the ui32NAKPollInterval parameter.
//
//*****************************************************************************
#define MAX_NAK_LIMIT           31          // Maximum NAK interval
#define DISABLE_NAK_LIMIT       0           // No NAK timeouts

//*****************************************************************************
//
// This value specifies the maximum size of transfers on endpoint 0 as 64
// bytes.  This value is fixed in hardware as the FIFO size for endpoint 0.
//
//*****************************************************************************
#define MAX_PACKET_SIZE_EP0     64

//*****************************************************************************
//
// These values are used to indicate which endpoint to access.
//
//*****************************************************************************
#define USB_EP_0                0x00000000  // Endpoint 0
#define USB_EP_1                0x00000010  // Endpoint 1
#define USB_EP_2                0x00000020  // Endpoint 2
#define USB_EP_3                0x00000030  // Endpoint 3
#define USB_EP_4                0x00000040  // Endpoint 4
#define USB_EP_5                0x00000050  // Endpoint 5
#define USB_EP_6                0x00000060  // Endpoint 6
#define USB_EP_7                0x00000070  // Endpoint 7
#define NUM_USB_EP              8           // Number of supported endpoints

//*****************************************************************************
//
// These macros allow conversion between 0-based endpoint indices and the
// USB_EP_x values required when calling various USB APIs.
//
//*****************************************************************************
#define IndexToUSBEP(x)         ((x) << 4)
#define USBEPToIndex(x)         ((x) >> 4)

//*****************************************************************************
//
// The following are values that can be passed to USBFIFOConfigSet() as the
// ui32FIFOSize parameter.
//
//*****************************************************************************
#define USB_FIFO_SZ_8           0x00000000  // 8 byte FIFO
#define USB_FIFO_SZ_16          0x00000001  // 16 byte FIFO
#define USB_FIFO_SZ_32          0x00000002  // 32 byte FIFO
#define USB_FIFO_SZ_64          0x00000003  // 64 byte FIFO
#define USB_FIFO_SZ_128         0x00000004  // 128 byte FIFO
#define USB_FIFO_SZ_256         0x00000005  // 256 byte FIFO
#define USB_FIFO_SZ_512         0x00000006  // 512 byte FIFO
#define USB_FIFO_SZ_1024        0x00000007  // 1024 byte FIFO
#define USB_FIFO_SZ_2048        0x00000008  // 2048 byte FIFO

//*****************************************************************************
//
// This macro allow conversion from a FIFO size label as defined above to
// a number of bytes
//
//*****************************************************************************
#define USBFIFOSizeToBytes(x)   (8 << (x))

//*****************************************************************************
//
// The following are values that can be passed to USBEndpointDataSend() as the
// ui32TransType parameter.
//
//*****************************************************************************
#define USB_TRANS_OUT           0x00000102  // Normal OUT transaction
#define USB_TRANS_IN            0x00000102  // Normal IN transaction
#define USB_TRANS_IN_LAST       0x0000010a  // Final IN transaction (for
                                            // endpoint 0 in device mode)
#define USB_TRANS_SETUP         0x0000110a  // Setup transaction (for endpoint
                                            // 0)
#define USB_TRANS_STATUS        0x00000142  // Status transaction (for endpoint
                                            // 0)

//*****************************************************************************
//
// The following are values are returned by the USBModeGet function.
//
//*****************************************************************************
#define USB_DUAL_MODE_HOST      0x00000001  // Dual mode controller is in Host
                                            // mode.
#define USB_DUAL_MODE_DEVICE    0x00000081  // Dual mode controller is in
                                            // Device mode.
#define USB_DUAL_MODE_NONE      0x00000080  // Dual mode controller mode is not
                                            // set.
#define USB_OTG_MODE_ASIDE_HOST 0x0000001d  // OTG controller on the A side of
                                            // the cable.
#define USB_OTG_MODE_ASIDE_NPWR 0x00000001  // OTG controller on the A side of
                                            // the cable.
#define USB_OTG_MODE_ASIDE_SESS 0x00000009  // OTG controller on the A side of
                                            // the cable Session Valid.
#define USB_OTG_MODE_ASIDE_AVAL 0x00000011  // OTG controller on the A side of
                                            // the cable A valid.
#define USB_OTG_MODE_ASIDE_DEV  0x00000019  // OTG controller on the A side of
                                            // the cable.
#define USB_OTG_MODE_BSIDE_HOST 0x0000009d  // OTG controller on the B side of
                                            // the cable.
#define USB_OTG_MODE_BSIDE_DEV  0x00000099  // OTG controller on the B side of
                                            // the cable.
#define USB_OTG_MODE_BSIDE_NPWR 0x00000081  // OTG controller on the B side of
                                            // the cable.
#define USB_OTG_MODE_NONE       0x00000080  // OTG controller mode is not set.

//*****************************************************************************
//
// The values for the USBDMAChannelIntEnable() and USBDMAChannelIntStatus()
// APIs.
//
//*****************************************************************************
#define USB_DMA_INT_CH8         0x00000080
#define USB_DMA_INT_CH7         0x00000040
#define USB_DMA_INT_CH6         0x00000020
#define USB_DMA_INT_CH5         0x00000010
#define USB_DMA_INT_CH4         0x00000008
#define USB_DMA_INT_CH3         0x00000004
#define USB_DMA_INT_CH2         0x00000002
#define USB_DMA_INT_CH1         0x00000001

//*****************************************************************************
//
// The values for the USBDMAChannelStatus() API.
//
//*****************************************************************************
#define USB_DMA_STATUS_ERROR    0x00000100

//*****************************************************************************
//
// The valid return values for the USBControllerVersion() API.
//
//*****************************************************************************
#define USB_CONTROLLER_VER_0    0x00000000  // This is for Blizzard class
                                            // devices.
#define USB_CONTROLLER_VER_1    0x00000001  // This is for Snowflake class
                                            // devices.

//*****************************************************************************
//
// The valid return values for the USBDMAModeSet() and USBDMAModeGet() APIs or
// USBDMAChannelConfig().
//
//*****************************************************************************
#define USB_DMA_CFG_BURST_NONE  0x00000000
#define USB_DMA_CFG_BURST_4     0x00000200
#define USB_DMA_CFG_BURST_8     0x00000400
#define USB_DMA_CFG_BURST_16    0x00000600
#define USB_DMA_CFG_INT_EN      0x00000008
#define USB_DMA_CFG_MODE_0      0x00000000
#define USB_DMA_CFG_MODE_1      0x00000004
#define USB_DMA_CFG_DIR_RX      0x00000000
#define USB_DMA_CFG_DIR_TX      0x00000002
#define USB_DMA_CFG_EN          0x00000001

//*****************************************************************************
//
// The following are values that can be passed to USBModeConfig() as the
// ui3Mode parameter.
//
//*****************************************************************************
#define USB_MODE_HOST_VBUS      0x00000004
#define USB_MODE_HOST           0x00000002
#define USB_MODE_DEV_VBUS       0x00000005
#define USB_MODE_DEV            0x00000003
#define USB_MODE_OTG            0x00000000

//*****************************************************************************
//
// Prototypes for the APIs.
//
//*****************************************************************************
extern uint32_t USBDevAddrGet(uint32_t ui32Base);
extern void USBDevAddrSet(uint32_t ui32Base, uint32_t ui32Address);
extern void USBDevConnect(uint32_t ui32Base);
extern void USBDevDisconnect(uint32_t ui32Base);
extern void USBDevEndpointConfigSet(uint32_t ui32Base, uint32_t ui32Endpoint,
                                    uint32_t ui32MaxPacketSize,
                                    uint32_t ui32Flags);
extern void USBDevEndpointConfigGet(uint32_t ui32Base, uint32_t ui32Endpoint,
                                    uint32_t *pui32MaxPacketSize,
                                    uint32_t *pui32Flags);
extern void USBDevEndpointDataAck(uint32_t ui32Base, uint32_t ui32Endpoint,
                                  bool bIsLastPacket);
extern void USBDevEndpointStall(uint32_t ui32Base, uint32_t ui32Endpoint,
                                uint32_t ui32Flags);
extern void USBDevEndpointStallClear(uint32_t ui32Base, uint32_t ui32Endpoint,
                                     uint32_t ui32Flags);
extern void USBDevEndpointStatusClear(uint32_t ui32Base, uint32_t ui32Endpoint,
                                      uint32_t ui32Flags);
extern uint32_t USBEndpointDataAvail(uint32_t ui32Base, uint32_t ui32Endpoint);
extern void USBEndpointDMAEnable(uint32_t ui32Base, uint32_t ui32Endpoint,
                                 uint32_t ui32Flags);
extern void USBEndpointDMADisable(uint32_t ui32Base, uint32_t ui32Endpoint,
                                  uint32_t ui32Flags);
extern void USBEndpointDMAConfigSet(uint32_t ui32Base, uint32_t ui32Endpoint,
                                    uint32_t ui32Config);
extern int32_t USBEndpointDataGet(uint32_t ui32Base, uint32_t ui32Endpoint,
                                  uint8_t *pui8Data, uint32_t *pui32Size);
extern int32_t USBEndpointDataPut(uint32_t ui32Base, uint32_t ui32Endpoint,
                                  uint8_t *pui8Data, uint32_t ui32Size);
extern int32_t USBEndpointDataSend(uint32_t ui32Base, uint32_t ui32Endpoint,
                                   uint32_t ui32TransType);
extern void USBEndpointDataToggleClear(uint32_t ui32Base,
                                       uint32_t ui32Endpoint,
                                       uint32_t ui32Flags);
extern void USBEndpointPacketCountSet(uint32_t ui32Base, uint32_t ui32Endpoint,
                                      uint32_t ui32Count);
extern uint32_t USBEndpointStatus(uint32_t ui32Base, uint32_t ui32Endpoint);
extern uint32_t USBFIFOAddrGet(uint32_t ui32Base, uint32_t ui32Endpoint);
extern void USBFIFOConfigGet(uint32_t ui32Base, uint32_t ui32Endpoint,
                             uint32_t *pui32FIFOAddress,
                             uint32_t *pui32FIFOSize, uint32_t ui32Flags);
extern void USBFIFOConfigSet(uint32_t ui32Base, uint32_t ui32Endpoint,
                             uint32_t ui32FIFOAddress, uint32_t ui32FIFOSize,
                             uint32_t ui32Flags);
extern void USBFIFOFlush(uint32_t ui32Base, uint32_t ui32Endpoint,
                         uint32_t ui32Flags);
extern uint32_t USBFrameNumberGet(uint32_t ui32Base);
extern uint32_t USBHostAddrGet(uint32_t ui32Base, uint32_t ui32Endpoint,
                               uint32_t ui32Flags);
extern void USBHostAddrSet(uint32_t ui32Base, uint32_t ui32Endpoint,
                           uint32_t ui32Addr, uint32_t ui32Flags);
extern void USBHostEndpointConfig(uint32_t ui32Base, uint32_t ui32Endpoint,
                                  uint32_t ui32MaxPacketSize,
                                  uint32_t ui32NAKPollInterval,
                                  uint32_t ui32TargetEndpoint,
                                  uint32_t ui32Flags);
extern void USBHostEndpointDataAck(uint32_t ui32Base,
                                   uint32_t ui32Endpoint);
extern void USBHostEndpointDataToggle(uint32_t ui32Base, uint32_t ui32Endpoint,
                                      bool bDataToggle, uint32_t ui32Flags);
extern void USBHostEndpointStatusClear(uint32_t ui32Base,
                                       uint32_t ui32Endpoint,
                                       uint32_t ui32Flags);
extern uint32_t USBHostHubAddrGet(uint32_t ui32Base, uint32_t ui32Endpoint,
                                  uint32_t ui32Flags);
extern void USBHostHubAddrSet(uint32_t ui32Base, uint32_t ui32Endpoint,
                              uint32_t ui32Addr, uint32_t ui32Flags);
extern void USBHostPwrDisable(uint32_t ui32Base);
extern void USBHostPwrEnable(uint32_t ui32Base);
extern void USBHostPwrConfig(uint32_t ui32Base, uint32_t ui32Flags);
extern void USBHostPwrFaultDisable(uint32_t ui32Base);
extern void USBHostPwrFaultEnable(uint32_t ui32Base);
extern void USBHostRequestIN(uint32_t ui32Base, uint32_t ui32Endpoint);
extern void USBHostRequestINClear(uint32_t ui32Base, uint32_t ui32Endpoint);
extern void USBHostRequestStatus(uint32_t ui32Base);
extern void USBHostReset(uint32_t ui32Base, bool bStart);
extern void USBHostResume(uint32_t ui32Base, bool bStart);
extern uint32_t USBHostSpeedGet(uint32_t ui32Base);
extern void USBHostSuspend(uint32_t ui32Base);
extern void USBIntDisableControl(uint32_t ui32Base, uint32_t ui32IntFlags);
extern void USBIntEnableControl(uint32_t ui32Base, uint32_t ui32IntFlags);
extern uint32_t USBIntStatusControl(uint32_t ui32Base);
extern void USBIntDisableEndpoint(uint32_t ui32Base, uint32_t ui32IntFlags);
extern void USBIntEnableEndpoint(uint32_t ui32Base, uint32_t ui32IntFlags);
extern uint32_t USBIntStatusEndpoint(uint32_t ui32Base);
extern void USBIntRegister(uint32_t ui32Base, void (*pfnHandler)(void));
extern void USBIntUnregister(uint32_t ui32Base);
extern void USBOTGSessionRequest(uint32_t ui32Base, bool bStart);
extern uint32_t USBModeGet(uint32_t ui32Base);
extern void USBEndpointDMAChannel(uint32_t ui32Base, uint32_t ui32Endpoint,
                                  uint32_t ui32Channel);
extern uint32_t USBControllerVersion(uint32_t ui32Base);
extern uint32_t USBDMAChannelIntStatus(uint32_t ui32Base);
extern void USBDMAChannelConfigSet(uint32_t ui32Base, uint32_t ui32Channel,
                                   uint32_t ui32Endpoint, uint32_t ui32Config);
extern void USBDMAChannelAddressSet(uint32_t ui32Base, uint32_t ui32Channel,
                                    void *pvAddress);
extern void *USBDMAChannelAddressGet(uint32_t ui32Base, uint32_t ui32Channel);
extern void USBDMAChannelCountSet(uint32_t ui32Base, uint32_t ui32Count,
                                  uint32_t ui32Channel);
extern uint32_t USBDMAChannelCountGet(uint32_t ui32Base, uint32_t ui32Channel);
extern uint32_t USBDMANumChannels(uint32_t ui32Base);
extern void USBDMAChannelAssign(uint32_t ui32Base, uint32_t ui32Endpoint,
                                uint32_t ui32Channel, uint32_t ui32Flags);
extern void USBDMAChannelIntEnable(uint32_t ui32Base, uint32_t ui32Channel);
extern void USBDMAChannelIntDisable(uint32_t ui32Base, uint32_t ui32Channel);
extern void USBDMAChannelEnable(uint32_t ui32Base, uint32_t ui32Channel);
extern void USBDMAChannelDisable(uint32_t ui32Base, uint32_t ui32Channel);
extern uint32_t USBDMAChannelStatus(uint32_t ui32Base, uint32_t ui32Channel);
extern void USBDMAChannelStatusClear(uint32_t ui32Base, uint32_t ui32Channel,
                                     uint32_t ui32Status);
extern void USBHostEndpointSpeed(uint32_t ui32Base, uint32_t ui32Endpoint,
                                 uint32_t ui32Flags);
extern void USBHostEndpointPing(uint32_t ui32Base, uint32_t ui32Endpoint,
                                bool bEnable);
extern void USBHostLPMSend(uint32_t ui32Base, uint32_t ui32Address,
                           uint32_t uiEndpoint);
extern void USBHostLPMConfig(uint32_t ui32Base, uint32_t ui32ResumeTime,
                             uint32_t ui32Config);
extern bool USBLPMRemoteWakeEnabled(uint32_t ui32Base);
extern void USBHostLPMResume(uint32_t ui32Base);
extern void USBDevLPMRemoteWake(uint32_t ui32Base);
extern void USBDevLPMConfig(uint32_t ui32Base, uint32_t ui32Config);
extern void USBDevLPMEnable(uint32_t ui32Base);
extern void USBDevLPMDisable(uint32_t ui32Base);
extern uint32_t USBLPMLinkStateGet(uint32_t ui32Base);
extern uint32_t USBLPMEndpointGet(uint32_t ui32Base);
extern uint32_t USBLPMIntStatus(uint32_t ui32Base);
extern void USBLPMIntDisable(uint32_t ui32Base, uint32_t ui32Ints);
extern void USBLPMIntEnable(uint32_t ui32Base, uint32_t ui32Ints);
extern void USBHighSpeed(uint32_t ui32Base, bool bEnable);
extern uint32_t USBDevSpeedGet(uint32_t ui32Base);
extern void USBClockEnable(uint32_t ui32Base, uint32_t ui32Div,
                           uint32_t ui32Flags);
extern void USBClockDisable(uint32_t ui32Base);
extern void USBULPIConfig(uint32_t ui32Base, uint32_t ui32Config);
extern void USBULPIEnable(uint32_t ui32Base);
extern void USBULPIDisable(uint32_t ui32Base);
extern uint8_t USBULPIRegRead(uint32_t ui32Base, uint8_t ui8Reg);
extern void USBULPIRegWrite(uint32_t ui32Base, uint8_t ui8Reg,
                            uint8_t ui8Data);
extern void USBHostMode(uint32_t ui32Base);
extern void USBDevMode(uint32_t ui32Base);
extern void USBOTGMode(uint32_t ui32Base);
extern void USBModeConfig(uint32_t ui32Base, uint32_t ui32Mode);
extern void USBPHYPowerOff(uint32_t ui32Base);
extern void USBPHYPowerOn(uint32_t ui32Base);
extern uint32_t USBNumEndpointsGet(uint32_t ui32Base);

//*****************************************************************************
//
// Mark the end of the C bindings section for C++ compilers.
//
//*****************************************************************************
#ifdef __cplusplus
}
#endif

#endif // __DRIVERLIB_USB_H__