1 files changed, 63 insertions, 0 deletions
diff --git a/boot_loader/bl_link_ccs.cmd b/boot_loader/bl_link_ccs.cmd
new file mode 100644
index 0000000..0e09b6e
--- /dev/null
+++ b/boot_loader/bl_link_ccs.cmd
@@ -0,0 +1,63 @@
+/******************************************************************************
+ *
+ * bl_link_ccs.cmd - CCS linker configuration file for boot loader.
+ *
+ * Copyright (c) 2009-2014 Texas Instruments Incorporated.  All rights reserved.
+ * Software License Agreement
+ * 
+ * Texas Instruments (TI) is supplying this software for use solely and
+ * exclusively on TI's microcontroller products. The software is owned by
+ * TI and/or its suppliers, and is protected under applicable copyright
+ * laws. You may not combine this software with "viral" open-source
+ * software in order to form a larger program.
+ * 
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+ * NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+ * NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+ * CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+ * DAMAGES, FOR ANY REASON WHATSOEVER.
+ * 
+ * This is part of revision 2.1.0.12573 of the Tiva Firmware Development Package.
+ *
+ *****************************************************************************/
+
+--retain=Vectors
+
+/* The following command line options are set as part of the CCS project.    */
+/* If you are building using the command line, or for some reason want to    */
+/* define them here, you can uncomment and modify these lines as needed.     */
+/* If you are using CCS for building, it is probably better to make any such */
+/* modifications in your CCS project and leave this file alone.              */
+/*                                                                           */
+/* --heap_size=0                                                             */
+/* --stack_size=256                                                          */
+/* --library=rtsv7M3_T_le_eabi.lib                                           */
+
+/* System memory map */
+
+MEMORY
+{
+    FLASH (RX) : origin = 0x00000000, length = 0x00010000
+    SRAM (RWX) : origin = 0x20000000, length = 0x00010000
+}
+
+/* Section allocation in memory */
+
+SECTIONS
+{
+    GROUP
+    {
+        .intvecs
+        .text
+        .const
+        .data
+    } load = FLASH, run = 0x20000000, LOAD_START(init_load), RUN_START(init_run), SIZE(init_size)
+
+    GROUP
+    {
+        .bss
+        .stack
+    } run = SRAM, RUN_START(bss_run), RUN_END(bss_end), SIZE(bss_size), RUN_END(__STACK_TOP)
+
+}