1 files changed, 26 insertions, 0 deletions
diff --git a/boards/dk-tm4c129x/uart_echo/readme.txt b/boards/dk-tm4c129x/uart_echo/readme.txt
new file mode 100644
index 0000000..9410427
--- /dev/null
+++ b/boards/dk-tm4c129x/uart_echo/readme.txt
@@ -0,0 +1,26 @@
+UART Echo
+
+This example application utilizes the UART to echo text.  The first UART
+(connected to the FTDI virtual serial port on the evaluation board) will be
+configured in 115,200 baud, 8-n-1 mode.  All characters received on the
+UART are transmitted back to the UART.
+
+-------------------------------------------------------------------------------
+
+Copyright (c) 2013-2014 Texas Instruments Incorporated.  All rights reserved.
+Software License Agreement
+
+Texas Instruments (TI) is supplying this software for use solely and
+exclusively on TI's microcontroller products. The software is owned by
+TI and/or its suppliers, and is protected under applicable copyright
+laws. You may not combine this software with "viral" open-source
+software in order to form a larger program.
+
+THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+DAMAGES, FOR ANY REASON WHATSOEVER.
+
+This is part of revision 2.1.0.12573 of the DK-TM4C129X Firmware Package.