diff options
| author | Yuval Adam <yuval@y3xz.com> | 2015-03-13 12:24:52 +0200 |
|---|---|---|
| committer | Yuval Adam <yuval@y3xz.com> | 2015-03-13 12:24:52 +0200 |
| commit | 4085ae3ddfbbf10c8ccbd3dccd43452c40a1fe40 (patch) | |
| tree | ac63581949a49511136e7e9e47d265bfb4119b26 /sensorlib/hw_bq27510g3.h | |
| parent | 788db64b8642bf31de6930d18a62177c64163ee0 (diff) | |
Add bootloader, nfclib and sensorlib
Diffstat (limited to 'sensorlib/hw_bq27510g3.h')
| -rw-r--r-- | sensorlib/hw_bq27510g3.h | 148 |
1 files changed, 148 insertions, 0 deletions
diff --git a/sensorlib/hw_bq27510g3.h b/sensorlib/hw_bq27510g3.h new file mode 100644 index 0000000..f0b3309 --- /dev/null +++ b/sensorlib/hw_bq27510g3.h @@ -0,0 +1,148 @@ +//*****************************************************************************
+//
+// hw_bq27510g3.h - Macros used when accessing the TI BQ27510-G3 Fuel Gauge
+//
+// Copyright (c) 2013-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the Tiva Firmware Development Package.
+//
+//*****************************************************************************
+
+#ifndef __SENSORLIB_HW_BQ27510G3_H__
+#define __SENSORLIB_HW_BQ27510G3_H__
+
+//*****************************************************************************
+//
+// The following are defines for the BQ27510G3 register addresses
+//
+//*****************************************************************************
+#define BQ27510G3_O_CNTL_LSB 0x00 // System Control Register LSB
+#define BQ27510G3_O_CNTL_MSB 0x01 // System Control Register MSB
+#define BQ27510G3_O_AT_RATE_LSB 0x02 // Discharge current value LSB
+#define BQ27510G3_O_AT_RATE_MSB 0x03 // Discharge current value MSB
+#define BQ27510G3_O_AT_RATE_TTE_LSB \
+ 0x04 // Remaining operating time of
+ // battery with current AT_RATE LSB
+#define BQ27510G3_O_AT_RATE_TTE_MSB \
+ 0x05 // Remaining operating time of
+ // battery with current AT_RATE MSB
+#define BQ27510G3_O_TEMP_LSB 0x06 // Battery temperature LSB
+#define BQ27510G3_O_TEMP_MSB 0x07 // Battery temperature MSB
+#define BQ27510G3_O_VOLT_LSB 0x08 // Battery cell-pack voltage LSB
+#define BQ27510G3_O_VOLT_MSB 0x09 // Battery cell-pack voltage MSB
+#define BQ27510G3_O_FLAGS_LSB 0x0A // Holds various operating status
+ // value of gas-guage LSB
+#define BQ27510G3_O_FLAGS_MSB 0x0B // Holds various operating status
+ // value of gas-guage MSB
+#define BQ27510G3_O_NOM_AV_CAP_LSB \
+ 0x0C // Uncompensated battery capacity
+ // remaining LSB
+#define BQ27510G3_O_NOM_AV_CAP_MSB \
+ 0x0D // Uncompensated battery capacity
+ // remaining MSB
+#define BQ27510G3_O_FULL_AV_CAP_LSB \
+ 0x0E // Uncompensated capacity of fully
+ // charged battery LSB
+#define BQ27510G3_O_FULL_AV_CAP_MSB \
+ 0x0F // Uncompensated capacity of fully
+ // charged battery MSB
+#define BQ27510G3_O_REM_CAP_LSB 0x10 // Compensated battery capacity
+ // remaining LSB
+#define BQ27510G3_O_REM_CAP_MSB 0x11 // Compensated battery capacity
+ // remaining MSB
+#define BQ27510G3_O_FULL_CHRG_CAP_LSB \
+ 0x12 // Compensated battery capacity
+ // when fully charged LSB
+#define BQ27510G3_O_FULL_CHRG_CAP_MSB \
+ 0x13 // Compensated battery capacity
+ // when fully charged MSB
+#define BQ27510G3_O_AVG_I_LSB 0x14 // Average current flow through
+ // sense resistor LSB
+#define BQ27510G3_O_AVG_I_MSB 0x15 // Average current flow through
+ // sense resistor MSB
+#define BQ27510G3_O_TTE_LSB 0x16 // Predicted remaining battery life
+ // (minutes) LSB
+#define BQ27510G3_O_TTE_MSB 0x17 // Predicted remaining battery life
+ // (minutes) MSB
+#define BQ27510G3_O_STBY_I_LSB 0x18 // Standbye current through sense
+ // resistor LSB
+#define BQ27510G3_O_STBY_I_MSB 0x19 // Standbye current through sense
+ // resistor MSB
+#define BQ27510G3_O_STBY_TTE_LSB \
+ 0x1A // Predicted remaining standby
+ // battery life LSB
+#define BQ27510G3_O_STBY_TTE_MSB \
+ 0x1B // Predicted remaining standby
+ // battery life MSB
+#define BQ27510G3_O_STATE_OF_HEALTH_LSB \
+ 0x1C // State of health (percent) LSB
+#define BQ27510G3_O_STATE_OF_HEALTH_MSB \
+ 0x1D // State of health (percent) MSB
+#define BQ27510G3_O_CYC_COUNT_LSB \
+ 0x1E // Number of battery cycles
+ // experienced LSB
+#define BQ27510G3_O_CYC_COUNT_MSB \
+ 0x1F // Number of battery cycles
+ // experienced MSB
+#define BQ27510G3_O_STATE_OF_CHRG_LSB \
+ 0x20 // State of charge (percent) LSB
+#define BQ27510G3_O_STATE_OF_CHRG_MSB \
+ 0x21 // State of charge (percent) MSB
+#define BQ27510G3_O_INST_I_LSB 0x22 // Instananeous current flow
+ // through sense resistor LSB
+#define BQ27510G3_O_INST_I_MSB 0x23 // Instananeous current flow
+ // through sense resistor MSB
+#define BQ27510G3_O_INT_TEMP_LSB \
+ 0x28 // Internal tmeperature LSB
+#define BQ27510G3_O_INT_TEMP_MSB \
+ 0x29 // Internal tmeperature MSB
+#define BQ27510G3_O_RES_SCALE_LSB \
+ 0x2A // Resistance Scale LSB
+#define BQ27510G3_O_RES_SCALE_MSB \
+ 0x2B // Resistance Scale MSB
+#define BQ27510G3_O_OP_CFG_LSB 0x2C // Operating Configuration LSB
+#define BQ27510G3_O_OP_CFG_MSB 0x2D // Operating Configuration MSB
+#define BQ27510G3_O_DCAP_LSB 0x2E // Designed capacity of battery LSB
+#define BQ27510G3_O_DCAP_MSB 0x2F // Designed capacity of battery MSB
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the BQ27510G3_O_CNTL_LSB
+// register.
+//
+//*****************************************************************************
+#define BQ27510G3_CNTL_LSB_FUNC_M \
+ 0xFF // Functions
+#define BQ27510G3_CNTL_LSB_FUNC_STATUS \
+ 0x00 // reports DF checksum, hibernate,
+ // IT, etc
+#define BQ27510G3_CNTL_LSB_FUNC_DEVTYPE \
+ 0x01 // reports device type (for
+ // example: 0x0520)
+#define BQ27510G3_CNTL_LSB_FUNC_FWVER \
+ 0x02 // reports firmware version on the
+ // device type
+#define BQ27510G3_CNTL_LSB_FUNC_PREVCMD \
+ 0x07 // reports previous Control()
+ // subcommand code
+#define BQ27510G3_CNTL_LSB_FUNC_RESET \
+ 0x41 // forces a full reset of the fuel
+ // gauge
+#define BQ27510G3_CNTL_LSB_FUNC_S \
+ 0
+
+#endif // __SENSORLIB_HW_BQ27510G3_H__
|