diff options
| author | Yuval Adam <yuv.adm@gmail.com> | 2014-06-29 12:34:32 +0300 |
|---|---|---|
| committer | Yuval Adam <yuv.adm@gmail.com> | 2014-06-29 12:34:32 +0300 |
| commit | c3e4c9a25c2910d2d66d52215b3406b13d5b23d5 (patch) | |
| tree | added370d1e356901f8579f076e3263fb0464db7 /boards/ek-tm4c123gxl | |
| parent | 990090a4cc9070837d31e66b58d40f0c3d038741 (diff) | |
Add more board models
Diffstat (limited to 'boards/ek-tm4c123gxl')
472 files changed, 72081 insertions, 0 deletions
diff --git a/boards/ek-tm4c123gxl/Makefile b/boards/ek-tm4c123gxl/Makefile new file mode 100644 index 0000000..162b209 --- /dev/null +++ b/boards/ek-tm4c123gxl/Makefile @@ -0,0 +1,61 @@ +#******************************************************************************
+#
+# Makefile - Rules for building the ek-tm4c123gxl examples.
+#
+# Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+# Software License Agreement
+#
+# Texas Instruments (TI) is supplying this software for use solely and
+# exclusively on TI's microcontroller products. The software is owned by
+# TI and/or its suppliers, and is protected under applicable copyright
+# laws. You may not combine this software with "viral" open-source
+# software in order to form a larger program.
+#
+# THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+# NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+# NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+# CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+# DAMAGES, FOR ANY REASON WHATSOEVER.
+#
+# This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+#
+#******************************************************************************
+
+#
+# A list of the directories containing the examples.
+#
+DIRS=bitband \
+ blinky \
+ freertos_demo \
+ gpio_jtag \
+ hello \
+ interrupts \
+ mpu_fault \
+ project0 \
+ qs-rgb \
+ timers \
+ uart_echo \
+ udma_demo \
+ usb_dev_bulk \
+ usb_dev_gamepad \
+ usb_dev_serial
+
+#
+# The default rule, which causes the examples to be built.
+#
+all:
+ @for i in ${DIRS}; \
+ do \
+ make -C $${i} || exit $$?; \
+ done
+
+#
+# The rule to clean out all the build products.
+#
+clean:
+ @rm -rf ${wildcard *~} __dummy__
+ @-for i in ${DIRS}; \
+ do \
+ make -C $${i} clean; \
+ done
diff --git a/boards/ek-tm4c123gxl/bitband/Makefile b/boards/ek-tm4c123gxl/bitband/Makefile new file mode 100644 index 0000000..77b33d7 --- /dev/null +++ b/boards/ek-tm4c123gxl/bitband/Makefile @@ -0,0 +1,86 @@ +#******************************************************************************
+#
+# Makefile - Rules for building the bitband example.
+#
+# Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+# Software License Agreement
+#
+# Texas Instruments (TI) is supplying this software for use solely and
+# exclusively on TI's microcontroller products. The software is owned by
+# TI and/or its suppliers, and is protected under applicable copyright
+# laws. You may not combine this software with "viral" open-source
+# software in order to form a larger program.
+#
+# THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+# NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+# NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+# CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+# DAMAGES, FOR ANY REASON WHATSOEVER.
+#
+# This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+#
+#******************************************************************************
+
+#
+# Defines the part type that this project uses.
+#
+PART=TM4C123GH6PM
+
+#
+# The base directory for TivaWare.
+#
+ROOT=../../../..
+
+#
+# Include the common make definitions.
+#
+include ${ROOT}/makedefs
+
+#
+# Where to find source files that do not live in this directory.
+#
+VPATH=../../../../utils
+
+#
+# Where to find header files that do not live in the source directory.
+#
+IPATH=..
+IPATH+=../../../..
+
+#
+# The default rule, which causes the bitband example to be built.
+#
+all: ${COMPILER}
+all: ${COMPILER}/bitband.axf
+
+#
+# The rule to clean out all the build products.
+#
+clean:
+ @rm -rf ${COMPILER} ${wildcard *~}
+
+#
+# The rule to create the target directory.
+#
+${COMPILER}:
+ @mkdir -p ${COMPILER}
+
+#
+# Rules for building the bitband example.
+#
+${COMPILER}/bitband.axf: ${COMPILER}/bitband.o
+${COMPILER}/bitband.axf: ${COMPILER}/startup_${COMPILER}.o
+${COMPILER}/bitband.axf: ${COMPILER}/uartstdio.o
+${COMPILER}/bitband.axf: ${ROOT}/driverlib/${COMPILER}/libdriver.a
+${COMPILER}/bitband.axf: bitband.ld
+SCATTERgcc_bitband=bitband.ld
+ENTRY_bitband=ResetISR
+CFLAGSgcc=-DTARGET_IS_TM4C123_RA1
+
+#
+# Include the automatically generated dependency files.
+#
+ifneq (${MAKECMDGOALS},clean)
+-include ${wildcard ${COMPILER}/*.d} __dummy__
+endif
diff --git a/boards/ek-tm4c123gxl/bitband/bitband.c b/boards/ek-tm4c123gxl/bitband/bitband.c new file mode 100644 index 0000000..1b1d20e --- /dev/null +++ b/boards/ek-tm4c123gxl/bitband/bitband.c @@ -0,0 +1,262 @@ +//*****************************************************************************
+//
+// bitband.c - Bit-band manipulation example.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "inc/hw_memmap.h"
+#include "inc/hw_types.h"
+#include "driverlib/debug.h"
+#include "driverlib/gpio.h"
+#include "driverlib/fpu.h"
+#include "driverlib/pin_map.h"
+#include "driverlib/sysctl.h"
+#include "driverlib/systick.h"
+#include "driverlib/rom.h"
+#include "driverlib/uart.h"
+#include "utils/uartstdio.h"
+
+//*****************************************************************************
+//
+//! \addtogroup example_list
+//! <h1>Bit-Banding (bitband)</h1>
+//!
+//! This example application demonstrates the use of the bit-banding
+//! capabilities of the Cortex-M4F microprocessor. All of SRAM and all of the
+//! peripherals reside within bit-band regions, meaning that bit-banding
+//! operations can be applied to any of them. In this example, a variable in
+//! SRAM is set to a particular value one bit at a time using bit-banding
+//! operations (it would be more efficient to do a single non-bit-banded write;
+//! this simply demonstrates the operation of bit-banding).
+//
+//*****************************************************************************
+
+
+//*****************************************************************************
+//
+// The value that is to be modified via bit-banding.
+//
+//*****************************************************************************
+static volatile uint32_t g_ui32Value;
+
+//*****************************************************************************
+//
+// The error routine that is called if the driver library encounters an error.
+//
+//*****************************************************************************
+#ifdef DEBUG
+void
+__error__(char *pcFilename, uint32_t ui32Line)
+{
+ while(1)
+ {
+ //
+ // Hang on runtime error.
+ //
+ }
+}
+#endif
+
+//*****************************************************************************
+//
+// Delay for the specified number of seconds. Depending upon the current
+// SysTick value, the delay will be between N-1 and N seconds (i.e. N-1 full
+// seconds are guaranteed, along with the remainder of the current second).
+//
+//*****************************************************************************
+void
+Delay(uint32_t ui32Seconds)
+{
+ //
+ // Loop while there are more seconds to wait.
+ //
+ while(ui32Seconds--)
+ {
+ //
+ // Wait until the SysTick value is less than 1000.
+ //
+ while(ROM_SysTickValueGet() > 1000)
+ {
+ }
+
+ //
+ // Wait until the SysTick value is greater than 1000.
+ //
+ while(ROM_SysTickValueGet() < 1000)
+ {
+ }
+ }
+}
+
+//*****************************************************************************
+//
+// Configure the UART and its pins. This must be called before UARTprintf().
+//
+//*****************************************************************************
+void
+ConfigureUART(void)
+{
+ //
+ // Enable the GPIO Peripheral used by the UART.
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOA);
+
+ //
+ // Enable UART0
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_UART0);
+
+ //
+ // Configure GPIO Pins for UART mode.
+ //
+ ROM_GPIOPinConfigure(GPIO_PA0_U0RX);
+ ROM_GPIOPinConfigure(GPIO_PA1_U0TX);
+ ROM_GPIOPinTypeUART(GPIO_PORTA_BASE, GPIO_PIN_0 | GPIO_PIN_1);
+
+ //
+ // Use the internal 16MHz oscillator as the UART clock source.
+ //
+ UARTClockSourceSet(UART0_BASE, UART_CLOCK_PIOSC);
+
+ //
+ // Initialize the UART for console I/O.
+ //
+ UARTStdioConfig(0, 115200, 16000000);
+}
+
+//*****************************************************************************
+//
+// This example demonstrates the use of bit-banding to set individual bits
+// within a word of SRAM.
+//
+//*****************************************************************************
+int
+main(void)
+{
+ uint32_t ui32Errors, ui32Idx;
+
+ //
+ // Enable lazy stacking for interrupt handlers. This allows floating-point
+ // instructions to be used within interrupt handlers, but at the expense of
+ // extra stack usage.
+ //
+ ROM_FPULazyStackingEnable();
+
+ //
+ // Set the clocking to run directly from the crystal.
+ //
+ ROM_SysCtlClockSet(SYSCTL_SYSDIV_1 | SYSCTL_USE_OSC | SYSCTL_OSC_MAIN |
+ SYSCTL_XTAL_16MHZ);
+
+ //
+ // Initialize the UART interface.
+ //
+ ConfigureUART();
+
+ UARTprintf("\033[2JBit banding...\n");
+
+ //
+ // Set up and enable the SysTick timer. It will be used as a reference
+ // for delay loops. The SysTick timer period will be set up for one
+ // second.
+ //
+ ROM_SysTickPeriodSet(ROM_SysCtlClockGet());
+ ROM_SysTickEnable();
+
+ //
+ // Set the value and error count to zero.
+ //
+ g_ui32Value = 0;
+ ui32Errors = 0;
+
+ //
+ // Print the initial value to the UART.
+ //
+ UARTprintf("\r%08x", g_ui32Value);
+
+ //
+ // Delay for 1 second.
+ //
+ Delay(1);
+
+ //
+ // Set the value to 0xdecafbad using bit band accesses to each individual
+ // bit.
+ //
+ for(ui32Idx = 0; ui32Idx < 32; ui32Idx++)
+ {
+ //
+ // Set this bit.
+ //
+ HWREGBITW(&g_ui32Value, 31 - ui32Idx) = (0xdecafbad >>
+ (31 - ui32Idx)) & 1;
+
+ //
+ // Print the current value to the UART.
+ //
+ UARTprintf("\r%08x", g_ui32Value);
+
+ //
+ // Delay for 1 second.
+ //
+ Delay(1);
+ }
+
+ //
+ // Make sure that the value is 0xdecafbad.
+ //
+ if(g_ui32Value != 0xdecafbad)
+ {
+ ui32Errors++;
+ }
+
+ //
+ // Make sure that the individual bits read back correctly.
+ //
+ for(ui32Idx = 0; ui32Idx < 32; ui32Idx++)
+ {
+ if(HWREGBITW(&g_ui32Value, ui32Idx) != ((0xdecafbad >> ui32Idx) & 1))
+ {
+ ui32Errors++;
+ }
+ }
+
+ //
+ // Print out the result.
+ //
+ if(ui32Errors)
+ {
+ UARTprintf("\nErrors!\n");
+ }
+ else
+ {
+ UARTprintf("\nSuccess!\n");
+ }
+
+ //
+ // Loop forever.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/bitband/bitband.ewd b/boards/ek-tm4c123gxl/bitband/bitband.ewd new file mode 100644 index 0000000..7a32408 --- /dev/null +++ b/boards/ek-tm4c123gxl/bitband/bitband.ewd @@ -0,0 +1,614 @@ +<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+ <fileVersion>1</fileVersion>
+ <configuration>
+ <name>Debug</name>
+ <toolchain>
+ <name>ARM</name>
+ </toolchain>
+ <debug>1</debug>
+ <settings>
+ <name>C-SPY</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>15</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CInput</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CEndian</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCVariant</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>MemOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MemFile</name>
+ <state>$TOOLKIT_DIR$\CONFIG\debugger\TexasInstruments\tm4c123gh6pm</state>
+ </option>
+ <option>
+ <name>RunToEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>RunToName</name>
+ <state>main</state>
+ </option>
+ <option>
+ <name>CExtraOptionsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCDDFArgumentProducer</name>
+ <state></state>
+ </option>
+ <option>
+ <name>OCDownloadSuppressDownload</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDownloadVerifyAll</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OCDynDriverList</name>
+ <state>LMIFTDI_ID</state>
+ </option>
+ <option>
+ <name>OCLastSavedByProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OCDownloadAttachToProgram</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FlashLoaders</name>
+ <state>,,,,(default),</state>
+ </option>
+ <option>
+ <name>UseFlashLoader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CLowLevel</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCBE8Slave</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ARMSIM_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCSimDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCSimEnablePSP</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCSimPspOverrideConfig</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCSimPspConfigFile</name>
+ <state></state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ANGEL_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CCAngelHeartbeat</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CAngelCommunication</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CAngelCommBaud</name>
+ <version>0</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>CAngelCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ANGELTCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoAngelLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AngelLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>GDBSERVER_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>TCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>LogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCJTagBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>IARROM_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CRomLogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomLogFileEditB</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CRomCommunication</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomCommBaud</name>
+ <version>0</version>
+ <state>7</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>JLINK_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>9</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>JLinkSpeed</name>
+ <state>32</state>
+ </option>
+ <option>
+ <name>CCJLinkDoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCJLinkHWResetDelay</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>JLinkInitialSpeed</name>
+ <state>32</state>
+ </option>
+ <option>
+ <name>CCDoJlinkMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCScanChainNonARMDevices</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkIRLength</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkCommRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkTCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>CCJLinkSpeedRadioV2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCUSBDevice</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchUndef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchSWI</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchData</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchPrefetch</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchIRQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchFIQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ <option>
+ <name>CCJLinkInterfaceRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCJLinkAttachSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCJLinkResetList</name>
+ <version>0</version>
+ <state>5</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>LMIFTDI_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>LmiftdiSpeed</name>
+ <state>500</state>
+ </option>
+ <option>
+ <name>CCLmiftdiDoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCLmiftdiLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>MACRAIGOR_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>2</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>jtag</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>EmuSpeed</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>TCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>LogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>DoEmuMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>EmuMultiTarget</name>
+ <state>0@ARM7TDMI</state>
+ </option>
+ <option>
+ <name>EmuHWReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CEmuCommBaud</name>
+ <version>0</version>
+ <state>4</state>
+ </option>
+ <option>
+ <name>CEmuCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>jtago</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>UnusedAddr</name>
+ <state>0x00800000</state>
+ </option>
+ <option>
+ <name>CCMacraigorHWResetDelay</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCJTagBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>RDI_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CRDIDriverDll</name>
+ <state>Browse to your RDI driver</state>
+ </option>
+ <option>
+ <name>CRDILogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRDILogFileEdit</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCRDIHWReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchUndef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchSWI</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchData</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchPrefetch</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchIRQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchFIQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDIUseETM</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>THIRDPARTY_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CThirdPartyDriverDll</name>
+ <state>Browse to your third-party driver</state>
+ </option>
+ <option>
+ <name>CThirdPartyLogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CThirdPartyLogFileEditB</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <debuggerPlugins>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\OSE\OseEpsilonPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Profiling\Profiling.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ </debuggerPlugins>
+ </configuration>
+</project>
diff --git a/boards/ek-tm4c123gxl/bitband/bitband.ewp b/boards/ek-tm4c123gxl/bitband/bitband.ewp new file mode 100644 index 0000000..452f429 --- /dev/null +++ b/boards/ek-tm4c123gxl/bitband/bitband.ewp @@ -0,0 +1,789 @@ +<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+ <fileVersion>1</fileVersion>
+ <configuration>
+ <name>Debug</name>
+ <toolchain>
+ <name>ARM</name>
+ </toolchain>
+ <debug>1</debug>
+ <settings>
+ <name>General</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <version>14</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>ExePath</name>
+ <state>ewarm\Exe</state>
+ </option>
+ <option>
+ <name>ObjPath</name>
+ <state>ewarm\Obj</state>
+ </option>
+ <option>
+ <name>ListPath</name>
+ <state>ewarm\List</state>
+ </option>
+ <option>
+ <name>Variant</name>
+ <version>19</version>
+ <state>39</state>
+ </option>
+ <option>
+ <name>GEndianMode</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>Input variant</name>
+ <version>1</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>Input description</name>
+ <state>No specifier n, no float nor long long, no scan set, no assignment suppressing.</state>
+ </option>
+ <option>
+ <name>Output variant</name>
+ <version>0</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>Output description</name>
+ <state>No specifier a, A, no specifier n, no float nor long long, no flags.</state>
+ </option>
+ <option>
+ <name>GOutputBinary</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FPU</name>
+ <version>2</version>
+ <state>5</state>
+ </option>
+ <option>
+ <name>OGCoreOrChip</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelect</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelectSlave</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>RTDescription</name>
+ <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+ </option>
+ <option>
+ <name>RTConfigPath</name>
+ <state>$TOOLKIT_DIR$\INC\DLib_Config_Normal.h</state>
+ </option>
+ <option>
+ <name>OGProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OGLastSavedByProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>GeneralMisraRules</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>GeneralEnableMisra</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GeneralMisraVerbose</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGChipSelectEditMenu</name>
+ <state>TM4C123GH6PM TexasInstruments TM4C123GH6PM</state>
+ </option>
+ <option>
+ <name>GenLowLevelInterface</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GEndianModeBE</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OGBufferedTerminalOutput</name>
+ <state>0</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ICCARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>19</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CCDefines</name>
+ <state>ewarm</state>
+ <state>PART_TM4C123GH6PM</state>
+ <state>TARGET_IS_TM4C123_RA1</state>
+ </option>
+ <option>
+ <name>CCPreprocFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocComments</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMnemonics</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMessages</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssSource</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagSuppress</name>
+ <state>Pa050</state>
+ </option>
+ <option>
+ <name>CCDiagRemark</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCDiagWarning</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCDiagError</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCAllowList</name>
+ <version>1</version>
+ <state>1111111</state>
+ </option>
+ <option>
+ <name>CCDebugInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IEndianMode</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IExtraOptionsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCLangConformance</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCSignedPlainChar</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCRequirePrototypes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagWarnAreErr</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCCompilerRuntimeInfo</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OutputFile</name>
+ <state>$FILE_BNAME$.o</state>
+ </option>
+ <option>
+ <name>CCLangSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCLibConfigHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>PreInclude</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CompilerMisraRules</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>CompilerMisraOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCIncludePath2</name>
+ <state>$PROJ_DIR$\..</state>
+ <state>$PROJ_DIR$\..\..\..\..</state>
+ </option>
+ <option>
+ <name>CCStdIncCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCStdIncludePath</name>
+ <state>$TOOLKIT_DIR$\INC\</state>
+ </option>
+ <option>
+ <name>CCCodeSection</name>
+ <state>.text</state>
+ </option>
+ <option>
+ <name>IInterwork2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IProcessorMode2</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptLevel</name>
+ <state>3</state>
+ </option>
+ <option>
+ <name>CCOptStrategy</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptLevelSlave</name>
+ <state>3</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>AARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>7</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>AObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AEndian</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>ACaseSensitivity</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacroChars</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnEnable</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnWhat</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnOne</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AWarnRange1</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AWarnRange2</name>
+ <state></state>
+ </option>
+ <option>
+ <name>ADebug</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AltRegisterNames</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ADefines</name>
+ <state>ewarm</state>
+ </option>
+ <option>
+ <name>AList</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AListHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AListing</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>Includes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacDefs</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacExps</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacExec</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OnlyAssed</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MultiLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLengthCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLength</name>
+ <state>80</state>
+ </option>
+ <option>
+ <name>TabSpacing</name>
+ <state>8</state>
+ </option>
+ <option>
+ <name>AXRef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDefines</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefInternal</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDual</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AOutputFile</name>
+ <state>$FILE_BNAME$.o</state>
+ </option>
+ <option>
+ <name>AMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ALimitErrorsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ALimitErrorsEdit</name>
+ <state>100</state>
+ </option>
+ <option>
+ <name>AIgnoreStdInclude</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AStdIncludes</name>
+ <state>$TOOLKIT_DIR$\INC\</state>
+ </option>
+ <option>
+ <name>AUserIncludes</name>
+ <state>$PROJ_DIR$\..</state>
+ <state>$PROJ_DIR$\..\..\..\..</state>
+ </option>
+ <option>
+ <name>AExtraOptionsCheckV2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AExtraOptionsV2</name>
+ <state></state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>OBJCOPY</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OOCOutputFormat</name>
+ <version>1</version>
+ <state>2</state>
+ </option>
+ <option>
+ <name>OCOutputOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OOCOutputFile</name>
+ <state>bitband.bin</state>
+ </option>
+ <option>
+ <name>OOCCommandLineProducer</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OOCObjCopyEnable</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>CUSTOM</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <extensions></extensions>
+ <cmdline></cmdline>
+ </data>
+ </settings>
+ <settings>
+ <name>BICOMP</name>
+ <archiveVersion>0</archiveVersion>
+ <data/>
+ </settings>
+ <settings>
+ <name>BUILDACTION</name>
+ <archiveVersion>1</archiveVersion>
+ <data>
+ <prebuild></prebuild>
+ <postbuild></postbuild>
+ </data>
+ </settings>
+ <settings>
+ <name>ILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>5</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>IlinkLibIOConfig</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>XLinkMisraHandler</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkInputFileSlave</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkOutputFile</name>
+ <state>bitband.out</state>
+ </option>
+ <option>
+ <name>IlinkDebugInfoEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkKeepSymbols</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinaryFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinarySymbol</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinarySegment</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinaryAlign</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkDefines</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkConfigDefines</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkMapFile</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkLogFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogInitialization</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogModule</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogSection</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogVeneer</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkIcfOverride</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkIcfFile</name>
+ <state>$PROJ_DIR$\bitband.icf</state>
+ </option>
+ <option>
+ <name>IlinkIcfFileSlave</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkSuppressDiags</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsRem</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsWarn</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsErr</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkWarningsAreErrors</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkUseExtraOptions</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkLowLevelInterfaceSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAutoLibEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAdditionalLibs</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkOverrideProgramEntryLabel</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabelSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabel</name>
+ <state>__iar_program_start</state>
+ </option>
+ <option>
+ <name>IlinkNXPLPCChecksum</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>DoFill</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FillerByte</name>
+ <state>0xFF</state>
+ </option>
+ <option>
+ <name>FillerStart</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>FillerEnd</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>CrcSize</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcAlign</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcAlgo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcPoly</name>
+ <state>0x11021</state>
+ </option>
+ <option>
+ <name>CrcCompl</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcBitOrder</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcInitialValue</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>DoCrc</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkBE8Slave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkBufferedTerminalOutput</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>IARCHIVE</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>IarchiveInputs</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IarchiveOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IarchiveOutput</name>
+ <state>###Unitialized###</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>BILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data/>
+ </settings>
+ </configuration>
+ <group>
+ <name>Libraries</name>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\driverlib\ewarm\Exe\driverlib.a</name>
+ </file>
+ </group>
+ <group>
+ <name>Source</name>
+ <file>
+ <name>$PROJ_DIR$\bitband.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\startup_ewarm.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\utils\uartstdio.c</name>
+ </file>
+ </group>
+</project>
diff --git a/boards/ek-tm4c123gxl/bitband/bitband.icf b/boards/ek-tm4c123gxl/bitband/bitband.icf new file mode 100644 index 0000000..a1eee89 --- /dev/null +++ b/boards/ek-tm4c123gxl/bitband/bitband.icf @@ -0,0 +1,78 @@ +//*****************************************************************************
+//
+// bitband.icf - Linker configuration file for bitband.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+//
+// Define a memory region that covers the entire 4 GB addressible space of the
+// processor.
+//
+define memory mem with size = 4G;
+
+//
+// Define a region for the on-chip flash.
+//
+define region FLASH = mem:[from 0x00000000 to 0x0003ffff];
+
+//
+// Define a region for the on-chip SRAM.
+//
+define region SRAM = mem:[from 0x20000000 to 0x20007fff];
+
+//
+// Define a block for the heap. The size should be set to something other
+// than zero if things in the C library that require the heap are used.
+//
+define block HEAP with alignment = 8, size = 0x00000000 { };
+
+//
+// Indicate that the read/write values should be initialized by copying from
+// flash.
+//
+initialize by copy { readwrite };
+
+//
+// Indicate that the noinit values should be left alone. This includes the
+// stack, which if initialized will destroy the return address from the
+// initialization code, causing the processor to branch to zero and fault.
+//
+do not initialize { section .noinit };
+
+//
+// Place the interrupt vectors at the start of flash.
+//
+place at start of FLASH { readonly section .intvec };
+
+//
+// Place the remainder of the read-only items into flash.
+//
+place in FLASH { readonly };
+
+//
+// Place the RAM vector table at the start of SRAM.
+//
+place at start of SRAM { section VTABLE };
+
+//
+// Place all read/write items into SRAM.
+//
+place in SRAM { readwrite, block HEAP };
diff --git a/boards/ek-tm4c123gxl/bitband/bitband.ld b/boards/ek-tm4c123gxl/bitband/bitband.ld new file mode 100644 index 0000000..9620427 --- /dev/null +++ b/boards/ek-tm4c123gxl/bitband/bitband.ld @@ -0,0 +1,57 @@ +/******************************************************************************
+ *
+ * bitband.ld - Linker configuration file for bitband.
+ *
+ * Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+ * Software License Agreement
+ *
+ * Texas Instruments (TI) is supplying this software for use solely and
+ * exclusively on TI's microcontroller products. The software is owned by
+ * TI and/or its suppliers, and is protected under applicable copyright
+ * laws. You may not combine this software with "viral" open-source
+ * software in order to form a larger program.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+ * NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+ * NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+ * CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+ * DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ * This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+ *
+ *****************************************************************************/
+
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x00040000
+ SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000
+}
+
+SECTIONS
+{
+ .text :
+ {
+ _text = .;
+ KEEP(*(.isr_vector))
+ *(.text*)
+ *(.rodata*)
+ _etext = .;
+ } > FLASH
+
+ .data : AT(ADDR(.text) + SIZEOF(.text))
+ {
+ _data = .;
+ *(vtable)
+ *(.data*)
+ _edata = .;
+ } > SRAM
+
+ .bss :
+ {
+ _bss = .;
+ *(.bss*)
+ *(COMMON)
+ _ebss = .;
+ } > SRAM
+}
diff --git a/boards/ek-tm4c123gxl/bitband/bitband.sct b/boards/ek-tm4c123gxl/bitband/bitband.sct new file mode 100644 index 0000000..cb075b8 --- /dev/null +++ b/boards/ek-tm4c123gxl/bitband/bitband.sct @@ -0,0 +1,47 @@ +;******************************************************************************
+;
+; bitband.sct - Linker configuration file for bitband.
+;
+; Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+; Software License Agreement
+;
+; Texas Instruments (TI) is supplying this software for use solely and
+; exclusively on TI's microcontroller products. The software is owned by
+; TI and/or its suppliers, and is protected under applicable copyright
+; laws. You may not combine this software with "viral" open-source
+; software in order to form a larger program.
+;
+; THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+; NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+; NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+; A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+; CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+; DAMAGES, FOR ANY REASON WHATSOEVER.
+;
+; This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+;
+;******************************************************************************
+
+LR_IROM 0x00000000 0x00040000
+{
+ ;
+ ; Specify the Execution Address of the code and the size.
+ ;
+ ER_IROM 0x00000000 0x00040000
+ {
+ *.o (RESET, +First)
+ * (InRoot$$Sections, +RO)
+ }
+
+ ;
+ ; Specify the Execution Address of the data area.
+ ;
+ RW_IRAM 0x20000000 0x00008000
+ {
+ ;
+ ; Uncomment the following line in order to use IntRegister().
+ ;
+ ;* (vtable, +First)
+ * (+RW, +ZI)
+ }
+}
diff --git a/boards/ek-tm4c123gxl/bitband/bitband.uvopt b/boards/ek-tm4c123gxl/bitband/bitband.uvopt new file mode 100644 index 0000000..630c6e2 --- /dev/null +++ b/boards/ek-tm4c123gxl/bitband/bitband.uvopt @@ -0,0 +1,303 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+ <SchemaVersion>1.0</SchemaVersion>
+
+ <Header>### uVision Project, (C) Keil Software</Header>
+
+ <Extensions>
+ <cExt>*.c</cExt>
+ <aExt>*.s*; *.src; *.a*</aExt>
+ <oExt>*.obj</oExt>
+ <lExt>*.lib</lExt>
+ <tExt>*.txt; *.h; *.inc</tExt>
+ <pExt>*.plm</pExt>
+ <CppX>*.cpp</CppX>
+ </Extensions>
+
+ <DaveTm>
+ <dwLowDateTime>0</dwLowDateTime>
+ <dwHighDateTime>0</dwHighDateTime>
+ </DaveTm>
+
+ <Target>
+ <TargetName>bitband</TargetName>
+ <ToolsetNumber>0x4</ToolsetNumber>
+ <ToolsetName>ARM-ADS</ToolsetName>
+ <TargetOption>
+ <CLKADS>8000000</CLKADS>
+ <OPTTT>
+ <gFlags>1</gFlags>
+ <BeepAtEnd>1</BeepAtEnd>
+ <RunSim>1</RunSim>
+ <RunTarget>0</RunTarget>
+ </OPTTT>
+ <OPTHX>
+ <HexSelection>1</HexSelection>
+ <FlashByte>65535</FlashByte>
+ <HexRangeLowAddress>0</HexRangeLowAddress>
+ <HexRangeHighAddress>0</HexRangeHighAddress>
+ <HexOffset>0</HexOffset>
+ </OPTHX>
+ <OPTLEX>
+ <PageWidth>79</PageWidth>
+ <PageLength>66</PageLength>
+ <TabStop>8</TabStop>
+ <ListingPath>.\rvmdk\</ListingPath>
+ </OPTLEX>
+ <ListingPage>
+ <CreateCListing>1</CreateCListing>
+ <CreateAListing>1</CreateAListing>
+ <CreateLListing>1</CreateLListing>
+ <CreateIListing>0</CreateIListing>
+ <AsmCond>1</AsmCond>
+ <AsmSymb>1</AsmSymb>
+ <AsmXref>0</AsmXref>
+ <CCond>1</CCond>
+ <CCode>0</CCode>
+ <CListInc>0</CListInc>
+ <CSymb>0</CSymb>
+ <LinkerCodeListing>0</LinkerCodeListing>
+ </ListingPage>
+ <OPTXL>
+ <LMap>1</LMap>
+ <LComments>1</LComments>
+ <LGenerateSymbols>1</LGenerateSymbols>
+ <LLibSym>1</LLibSym>
+ <LLines>1</LLines>
+ <LLocSym>1</LLocSym>
+ <LPubSym>1</LPubSym>
+ <LXref>0</LXref>
+ <LExpSel>0</LExpSel>
+ </OPTXL>
+ <OPTFL>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <IsCurrentTarget>1</IsCurrentTarget>
+ </OPTFL>
+ <CpuCode>255</CpuCode>
+ <Books>
+ <Book>
+ <Number>0</Number>
+ <Title>Data Sheet</Title>
+ <Path>DATASHTS\Luminary\TM4C123GH6PM.PDF</Path>
+ </Book>
+ </Books>
+ <DllOpt>
+ <SimDllName>SARMCM3.DLL</SimDllName>
+ <SimDllArguments>-MPU</SimDllArguments>
+ <SimDlgDllName>DCM.DLL</SimDlgDllName>
+ <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+ <TargetDllName>SARMCM3.DLL</TargetDllName>
+ <TargetDllArguments>-MPU</TargetDllArguments>
+ <TargetDlgDllName>TCM.DLL</TargetDlgDllName>
+ <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+ </DllOpt>
+ <DebugOpt>
+ <uSim>0</uSim>
+ <uTrg>1</uTrg>
+ <sLdApp>1</sLdApp>
+ <sGomain>1</sGomain>
+ <sRbreak>1</sRbreak>
+ <sRwatch>1</sRwatch>
+ <sRmem>1</sRmem>
+ <sRfunc>1</sRfunc>
+ <sRbox>1</sRbox>
+ <tLdApp>1</tLdApp>
+ <tGomain>0</tGomain>
+ <tRbreak>1</tRbreak>
+ <tRwatch>1</tRwatch>
+ <tRmem>1</tRmem>
+ <tRfunc>0</tRfunc>
+ <tRbox>1</tRbox>
+ <sRunDeb>0</sRunDeb>
+ <sLrtime>0</sLrtime>
+ <nTsel>4</nTsel>
+ <sDll></sDll>
+ <sDllPa></sDllPa>
+ <sDlgDll></sDlgDll>
+ <sDlgPa></sDlgPa>
+ <sIfile></sIfile>
+ <tDll></tDll>
+ <tDllPa></tDllPa>
+ <tDlgDll></tDlgDll>
+ <tDlgPa></tDlgPa>
+ <tIfile></tIfile>
+ <pMon>BIN\lmidk-agdi.dll</pMon>
+ </DebugOpt>
+ <TargetDriverDllRegistry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>lmidk-agdi</Key>
+ <Name>-O4614 -S3 -FO29</Name>
+ </SetRegEntry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>DLGTARM</Key>
+ <Name></Name>
+ </SetRegEntry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>ARMDBGFLAGS</Key>
+ <Name></Name>
+ </SetRegEntry>
+ </TargetDriverDllRegistry>
+ <DebugFlag>
+ <trace>0</trace>
+ <periodic>1</periodic>
+ <aLwin>0</aLwin>
+ <aCover>0</aCover>
+ <aSer1>0</aSer1>
+ <aSer2>0</aSer2>
+ <aPa>0</aPa>
+ <viewmode>1</viewmode>
+ <vrSel>0</vrSel>
+ <aSym>0</aSym>
+ <aTbox>0</aTbox>
+ <AscS1>0</AscS1>
+ <AscS2>0</AscS2>
+ <AscS3>0</AscS3>
+ <aSer3>0</aSer3>
+ <eProf>0</eProf>
+ <aLa>0</aLa>
+ <aPa1>0</aPa1>
+ <AscS4>0</AscS4>
+ <aSer4>0</aSer4>
+ <StkLoc>0</StkLoc>
+ <TrcWin>0</TrcWin>
+ <newCpu>0</newCpu>
+ <uProt>0</uProt>
+ </DebugFlag>
+ <LintExecutable></LintExecutable>
+ <LintConfigFile></LintConfigFile>
+ </TargetOption>
+ </Target>
+
+ <Group>
+ <GroupName>Source</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>1</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\bitband.c</PathWithFileName>
+ <FilenameWithoutPath>bitband.c</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>2</FileNumber>
+ <FileType>2</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\startup_rvmdk.S</PathWithFileName>
+ <FilenameWithoutPath>startup_rvmdk.S</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>3</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\utils\uartstdio.c</PathWithFileName>
+ <FilenameWithoutPath>uartstdio.c</FilenameWithoutPath>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>Libraries</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>4</FileNumber>
+ <FileType>4</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\driverlib\rvmdk\driverlib.lib</PathWithFileName>
+ <FilenameWithoutPath>driverlib.lib</FilenameWithoutPath>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>Documentation</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>3</GroupNumber>
+ <FileNumber>5</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <Focus>1</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>1</TopLine>
+ <CurrentLine>1</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\readme.txt</PathWithFileName>
+ <FilenameWithoutPath>readme.txt</FilenameWithoutPath>
+ <WindowPosition>
+ <length>44</length>
+ <flags>0</flags>
+ <showCmd>1</showCmd>
+ <MinPosition>
+ <xPos>-1</xPos>
+ <yPos>-1</yPos>
+ </MinPosition>
+ <MaxPosition>
+ <xPos>-1</xPos>
+ <yPos>-1</yPos>
+ </MaxPosition>
+ <NormalPosition>
+ <Top>0</Top>
+ <Left>0</Left>
+ <Right>729</Right>
+ <Bottom>300</Bottom>
+ </NormalPosition>
+ </WindowPosition>
+ </File>
+ </Group>
+
+ <MDIGroups>
+ <Orientation>1</Orientation>
+ <ActiveMDIGroup>0</ActiveMDIGroup>
+ <MDIGroup>
+ <Size>100</Size>
+ <ActiveTab>0</ActiveTab>
+ <Documents>
+ <Doc>
+ <Name>.\readme.txt</Name>
+ <ColumnNumber>0</ColumnNumber>
+ <TopLine>1</TopLine>
+ <CurrentLine>1</CurrentLine>
+ </Doc>
+ </Documents>
+ </MDIGroup>
+ </MDIGroups>
+
+</ProjectOpt>
diff --git a/boards/ek-tm4c123gxl/bitband/bitband.uvproj b/boards/ek-tm4c123gxl/bitband/bitband.uvproj new file mode 100644 index 0000000..50ed088 --- /dev/null +++ b/boards/ek-tm4c123gxl/bitband/bitband.uvproj @@ -0,0 +1,429 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+ <SchemaVersion>1.1</SchemaVersion>
+
+ <Header>### uVision Project, (C) Keil Software</Header>
+
+ <Targets>
+ <Target>
+ <TargetName>bitband</TargetName>
+ <ToolsetNumber>0x4</ToolsetNumber>
+ <ToolsetName>ARM-ADS</ToolsetName>
+ <TargetOption>
+ <TargetCommonOption>
+ <Device>TM4C123GH6PM</Device>
+ <Vendor>Texas Instruments</Vendor>
+ <Cpu>IRAM(0x20000000-0x20007FFF) IROM(0-0x3FFFF) CLOCK(8000000) CPUTYPE("Cortex-M4") FPU2</Cpu>
+ <FlashUtilSpec></FlashUtilSpec>
+ <StartupFile>"STARTUP\Luminary\Startup.s" ("Luminary Startup Code")</StartupFile>
+ <FlashDriverDll>UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0LM4F_256 -FS00 -FL040000)</FlashDriverDll>
+ <DeviceId>5919</DeviceId>
+ <RegisterFile>LM4Fxxxx.H</RegisterFile>
+ <MemoryEnv></MemoryEnv>
+ <Cmp></Cmp>
+ <Asm></Asm>
+ <Linker></Linker>
+ <OHString></OHString>
+ <InfinionOptionDll></InfinionOptionDll>
+ <SLE66CMisc></SLE66CMisc>
+ <SLE66AMisc></SLE66AMisc>
+ <SLE66LinkerMisc></SLE66LinkerMisc>
+ <UseEnv>0</UseEnv>
+ <BinPath></BinPath>
+ <IncludePath></IncludePath>
+ <LibPath></LibPath>
+ <RegisterFilePath>Luminary\</RegisterFilePath>
+ <DBRegisterFilePath>Luminary\</DBRegisterFilePath>
+ <TargetStatus>
+ <Error>0</Error>
+ <ExitCodeStop>0</ExitCodeStop>
+ <ButtonStop>0</ButtonStop>
+ <NotGenerated>0</NotGenerated>
+ <InvalidFlash>1</InvalidFlash>
+ </TargetStatus>
+ <OutputDirectory>.\rvmdk\</OutputDirectory>
+ <OutputName>bitband</OutputName>
+ <CreateExecutable>1</CreateExecutable>
+ <CreateLib>0</CreateLib>
+ <CreateHexFile>0</CreateHexFile>
+ <DebugInformation>1</DebugInformation>
+ <BrowseInformation>1</BrowseInformation>
+ <ListingPath>.\rvmdk\</ListingPath>
+ <HexFormatSelection>1</HexFormatSelection>
+ <Merge32K>0</Merge32K>
+ <CreateBatchFile>0</CreateBatchFile>
+ <BeforeCompile>
+ <RunUserProg1>0</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name></UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </BeforeCompile>
+ <BeforeMake>
+ <RunUserProg1>0</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name></UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </BeforeMake>
+ <AfterMake>
+ <RunUserProg1>1</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name>fromelf --bin --output .\rvmdk\bitband.bin .\rvmdk\bitband.axf</UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </AfterMake>
+ <SelectedForBatchBuild>0</SelectedForBatchBuild>
+ <SVCSIdString></SVCSIdString>
+ </TargetCommonOption>
+ <CommonProperty>
+ <UseCPPCompiler>0</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <DllOption>
+ <SimDllName>SARMCM3.DLL</SimDllName>
+ <SimDllArguments>-MPU</SimDllArguments>
+ <SimDlgDll>DCM.DLL</SimDlgDll>
+ <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+ <TargetDllName>SARMCM3.DLL</TargetDllName>
+ <TargetDllArguments>-MPU</TargetDllArguments>
+ <TargetDlgDll>TCM.DLL</TargetDlgDll>
+ <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+ </DllOption>
+ <DebugOption>
+ <OPTHX>
+ <HexSelection>1</HexSelection>
+ <HexRangeLowAddress>0</HexRangeLowAddress>
+ <HexRangeHighAddress>0</HexRangeHighAddress>
+ <HexOffset>0</HexOffset>
+ <Oh166RecLen>16</Oh166RecLen>
+ </OPTHX>
+ <Simulator>
+ <UseSimulator>0</UseSimulator>
+ <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+ <RunToMain>1</RunToMain>
+ <RestoreBreakpoints>1</RestoreBreakpoints>
+ <RestoreWatchpoints>1</RestoreWatchpoints>
+ <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+ <RestoreFunctions>1</RestoreFunctions>
+ <RestoreToolbox>1</RestoreToolbox>
+ <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+ </Simulator>
+ <Target>
+ <UseTarget>1</UseTarget>
+ <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+ <RunToMain>0</RunToMain>
+ <RestoreBreakpoints>1</RestoreBreakpoints>
+ <RestoreWatchpoints>1</RestoreWatchpoints>
+ <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+ <RestoreFunctions>0</RestoreFunctions>
+ <RestoreToolbox>1</RestoreToolbox>
+ </Target>
+ <RunDebugAfterBuild>0</RunDebugAfterBuild>
+ <TargetSelection>4</TargetSelection>
+ <SimDlls>
+ <CpuDll></CpuDll>
+ <CpuDllArguments></CpuDllArguments>
+ <PeripheralDll></PeripheralDll>
+ <PeripheralDllArguments></PeripheralDllArguments>
+ <InitializationFile></InitializationFile>
+ </SimDlls>
+ <TargetDlls>
+ <CpuDll></CpuDll>
+ <CpuDllArguments></CpuDllArguments>
+ <PeripheralDll></PeripheralDll>
+ <PeripheralDllArguments></PeripheralDllArguments>
+ <InitializationFile></InitializationFile>
+ <Driver>BIN\lmidk-agdi.dll</Driver>
+ </TargetDlls>
+ </DebugOption>
+ <Utilities>
+ <Flash1>
+ <UseTargetDll>1</UseTargetDll>
+ <UseExternalTool>0</UseExternalTool>
+ <RunIndependent>0</RunIndependent>
+ <UpdateFlashBeforeDebugging>0</UpdateFlashBeforeDebugging>
+ <Capability>1</Capability>
+ <DriverSelection>4099</DriverSelection>
+ </Flash1>
+ <Flash2>BIN\lmidk-agdi.dll</Flash2>
+ <Flash3></Flash3>
+ <Flash4></Flash4>
+ </Utilities>
+ <TargetArmAds>
+ <ArmAdsMisc>
+ <GenerateListings>0</GenerateListings>
+ <asHll>1</asHll>
+ <asAsm>1</asAsm>
+ <asMacX>1</asMacX>
+ <asSyms>1</asSyms>
+ <asFals>1</asFals>
+ <asDbgD>1</asDbgD>
+ <asForm>1</asForm>
+ <ldLst>0</ldLst>
+ <ldmm>1</ldmm>
+ <ldXref>1</ldXref>
+ <BigEnd>0</BigEnd>
+ <AdsALst>0</AdsALst>
+ <AdsACrf>0</AdsACrf>
+ <AdsANop>0</AdsANop>
+ <AdsANot>0</AdsANot>
+ <AdsLLst>1</AdsLLst>
+ <AdsLmap>1</AdsLmap>
+ <AdsLcgr>1</AdsLcgr>
+ <AdsLsym>1</AdsLsym>
+ <AdsLszi>1</AdsLszi>
+ <AdsLtoi>1</AdsLtoi>
+ <AdsLsun>1</AdsLsun>
+ <AdsLven>1</AdsLven>
+ <AdsLsxf>1</AdsLsxf>
+ <RvctClst>0</RvctClst>
+ <GenPPlst>0</GenPPlst>
+ <AdsCpuType>"Cortex-M4"</AdsCpuType>
+ <RvctDeviceName></RvctDeviceName>
+ <mOS>0</mOS>
+ <uocRom>0</uocRom>
+ <uocRam>0</uocRam>
+ <hadIROM>1</hadIROM>
+ <hadIRAM>1</hadIRAM>
+ <hadXRAM>0</hadXRAM>
+ <uocXRam>0</uocXRam>
+ <RvdsVP>2</RvdsVP>
+ <hadIRAM2>0</hadIRAM2>
+ <hadIROM2>0</hadIROM2>
+ <StupSel>8</StupSel>
+ <useUlib>1</useUlib>
+ <EndSel>0</EndSel>
+ <uLtcg>0</uLtcg>
+ <RoSelD>3</RoSelD>
+ <RwSelD>3</RwSelD>
+ <CodeSel>0</CodeSel>
+ <OptFeed>0</OptFeed>
+ <NoZi1>0</NoZi1>
+ <NoZi2>0</NoZi2>
+ <NoZi3>0</NoZi3>
+ <NoZi4>0</NoZi4>
+ <NoZi5>0</NoZi5>
+ <Ro1Chk>0</Ro1Chk>
+ <Ro2Chk>0</Ro2Chk>
+ <Ro3Chk>0</Ro3Chk>
+ <Ir1Chk>1</Ir1Chk>
+ <Ir2Chk>0</Ir2Chk>
+ <Ra1Chk>0</Ra1Chk>
+ <Ra2Chk>0</Ra2Chk>
+ <Ra3Chk>0</Ra3Chk>
+ <Im1Chk>1</Im1Chk>
+ <Im2Chk>0</Im2Chk>
+ <OnChipMemories>
+ <Ocm1>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm1>
+ <Ocm2>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm2>
+ <Ocm3>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm3>
+ <Ocm4>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm4>
+ <Ocm5>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm5>
+ <Ocm6>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm6>
+ <IRAM>
+ <Type>0</Type>
+ <StartAddress>0x20000000</StartAddress>
+ <Size>0x8000</Size>
+ </IRAM>
+ <IROM>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x40000</Size>
+ </IROM>
+ <XRAM>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </XRAM>
+ <OCR_RVCT1>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT1>
+ <OCR_RVCT2>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT2>
+ <OCR_RVCT3>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT3>
+ <OCR_RVCT4>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x40000</Size>
+ </OCR_RVCT4>
+ <OCR_RVCT5>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT5>
+ <OCR_RVCT6>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT6>
+ <OCR_RVCT7>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT7>
+ <OCR_RVCT8>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT8>
+ <OCR_RVCT9>
+ <Type>0</Type>
+ <StartAddress>0x20000000</StartAddress>
+ <Size>0x8000</Size>
+ </OCR_RVCT9>
+ <OCR_RVCT10>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT10>
+ </OnChipMemories>
+ <RvctStartVector></RvctStartVector>
+ </ArmAdsMisc>
+ <Cads>
+ <interw>0</interw>
+ <Optim>3</Optim>
+ <oTime>0</oTime>
+ <SplitLS>0</SplitLS>
+ <OneElfS>1</OneElfS>
+ <Strict>0</Strict>
+ <EnumInt>0</EnumInt>
+ <PlainCh>0</PlainCh>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <wLevel>2</wLevel>
+ <uThumb>0</uThumb>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define>rvmdk PART_TM4C123GH6PM TARGET_IS_TM4C123_RA1</Define>
+ <Undefine></Undefine>
+ <IncludePath>..;..\..\..\..;</IncludePath>
+ </VariousControls>
+ </Cads>
+ <Aads>
+ <interw>1</interw>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <thumb>0</thumb>
+ <SplitLS>0</SplitLS>
+ <SwStkChk>0</SwStkChk>
+ <NoWarn>0</NoWarn>
+ <VariousControls>
+ <MiscControls></MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Aads>
+ <LDads>
+ <umfTarg>0</umfTarg>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <noStLib>0</noStLib>
+ <RepFail>1</RepFail>
+ <useFile>0</useFile>
+ <TextAddressRange>0x00000000</TextAddressRange>
+ <DataAddressRange>0x20000000</DataAddressRange>
+ <ScatterFile>bitband.sct</ScatterFile>
+ <IncludeLibs></IncludeLibs>
+ <IncludeLibsPath></IncludeLibsPath>
+ <Misc>--entry Reset_Handler</Misc>
+ <LinkerInputFile></LinkerInputFile>
+ <DisabledWarnings></DisabledWarnings>
+ </LDads>
+ </TargetArmAds>
+ </TargetOption>
+ <Groups>
+ <Group>
+ <GroupName>Source</GroupName>
+ <Files>
+ <File>
+ <FileName>bitband.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>.\bitband.c</FilePath>
+ </File>
+ <File>
+ <FileName>startup_rvmdk.S</FileName>
+ <FileType>2</FileType>
+ <FilePath>.\startup_rvmdk.S</FilePath>
+ </File>
+ <File>
+ <FileName>uartstdio.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>..\..\..\..\utils\uartstdio.c</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>Libraries</GroupName>
+ <Files>
+ <File>
+ <FileName>driverlib.lib</FileName>
+ <FileType>4</FileType>
+ <FilePath>..\..\..\..\driverlib\rvmdk\driverlib.lib</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>Documentation</GroupName>
+ <Files>
+ <File>
+ <FileName>readme.txt</FileName>
+ <FileType>5</FileType>
+ <FilePath>.\readme.txt</FilePath>
+ </File>
+ </Files>
+ </Group>
+ </Groups>
+ </Target>
+ </Targets>
+
+</Project>
diff --git a/boards/ek-tm4c123gxl/bitband/bitband_ccs.cmd b/boards/ek-tm4c123gxl/bitband/bitband_ccs.cmd new file mode 100644 index 0000000..75c8982 --- /dev/null +++ b/boards/ek-tm4c123gxl/bitband/bitband_ccs.cmd @@ -0,0 +1,70 @@ +/******************************************************************************
+ *
+ * bitband_ccs.cmd - CCS linker configuration file for bitband.
+ *
+ * Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+ * Software License Agreement
+ *
+ * Texas Instruments (TI) is supplying this software for use solely and
+ * exclusively on TI's microcontroller products. The software is owned by
+ * TI and/or its suppliers, and is protected under applicable copyright
+ * laws. You may not combine this software with "viral" open-source
+ * software in order to form a larger program.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+ * NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+ * NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+ * CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+ * DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ * This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+ *
+ *****************************************************************************/
+
+--retain=g_pfnVectors
+
+/* The following command line options are set as part of the CCS project. */
+/* If you are building using the command line, or for some reason want to */
+/* define them here, you can uncomment and modify these lines as needed. */
+/* If you are using CCS for building, it is probably better to make any such */
+/* modifications in your CCS project and leave this file alone. */
+/* */
+/* --heap_size=0 */
+/* --stack_size=256 */
+/* --library=rtsv7M3_T_le_eabi.lib */
+
+/* The starting address of the application. Normally the interrupt vectors */
+/* must be located at the beginning of the application. */
+#define APP_BASE 0x00000000
+#define RAM_BASE 0x20000000
+
+/* System memory map */
+
+MEMORY
+{
+ /* Application stored in and executes from internal flash */
+ FLASH (RX) : origin = APP_BASE, length = 0x00040000
+ /* Application uses internal RAM for data */
+ SRAM (RWX) : origin = 0x20000000, length = 0x00008000
+}
+
+/* Section allocation in memory */
+
+SECTIONS
+{
+ .intvecs: > APP_BASE
+ .text : > FLASH
+ .const : > FLASH
+ .cinit : > FLASH
+ .pinit : > FLASH
+ .init_array : > FLASH
+
+ .vtable : > RAM_BASE
+ .data : > SRAM
+ .bss : > SRAM
+ .sysmem : > SRAM
+ .stack : > SRAM
+}
+
+__STACK_TOP = __stack + 512;
diff --git a/boards/ek-tm4c123gxl/bitband/ccs/.ccsimportspec b/boards/ek-tm4c123gxl/bitband/ccs/.ccsimportspec new file mode 100644 index 0000000..9748e3c --- /dev/null +++ b/boards/ek-tm4c123gxl/bitband/ccs/.ccsimportspec @@ -0,0 +1,8 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<importSpec>
+ <source root="..">
+ <file name="bitband.c"/>
+ <file regex=".*_ccs\.cmd"/>
+ <file name="startup_ccs.c"/>
+ </source>
+</importSpec>
diff --git a/boards/ek-tm4c123gxl/bitband/ccs/.ccsproject b/boards/ek-tm4c123gxl/bitband/ccs/.ccsproject new file mode 100644 index 0000000..75fb50e --- /dev/null +++ b/boards/ek-tm4c123gxl/bitband/ccs/.ccsproject @@ -0,0 +1,10 @@ +<?xml version="1.0" encoding="UTF-8" ?>
+<?ccsproject version="1.0"?>
+<projectOptions>
+ <deviceVariant value="Cortex M.TM4C123GH6PM"/>
+ <deviceFamily value="TMS470"/>
+ <deviceEndianness value="little"/>
+ <codegenToolVersion value="5.0.4"/>
+ <isElfFormat value="true"/>
+ <rts value="libc.a"/>
+</projectOptions>
diff --git a/boards/ek-tm4c123gxl/bitband/ccs/.cproject b/boards/ek-tm4c123gxl/bitband/ccs/.cproject new file mode 100644 index 0000000..8ab6b79 --- /dev/null +++ b/boards/ek-tm4c123gxl/bitband/ccs/.cproject @@ -0,0 +1,189 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+ <storageModule configRelations="2" moduleId="org.eclipse.cdt.core.settings">
+ <cconfiguration id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.693391717">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.693391717" moduleId="org.eclipse.cdt.core.settings" name="Debug">
+ <macros>
+ <stringMacro name="SW_ROOT" type="VALUE_PATH_DIR" value="${PROJECT_ROOT}/../../../../.."/>
+ </macros>
+ <externalSettings/>
+ <extensions>
+ <extension id="com.ti.ccstudio.binaryparser.CoffParser" point="org.eclipse.cdt.core.BinaryParser"/>
+ <extension id="com.ti.ccstudio.errorparser.CoffErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.LinkErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.AsmErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactExtension="out" artifactName="${ProjName}" buildProperties="" cleanCommand="${CG_CLEAN_CMD}" description="" id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.693391717" name="Debug" parent="com.ti.ccstudio.buildDefinitions.TMS470.Debug" postbuildStep=""${CCE_INSTALL_ROOT}/utils/tiobj2bin/tiobj2bin" "${BuildArtifactFileName}" "${BuildArtifactFileBaseName}.bin" "${CG_TOOL_ROOT}/bin/armofd" "${CG_TOOL_ROOT}/bin/armhex" "${CCE_INSTALL_ROOT}/utils/tiobj2bin/mkhex4bin"">
+ <folderInfo id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.693391717." name="/" resourcePath="">
+ <toolChain id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.DebugToolchain.1219296023" name="TI Build Tools" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.DebugToolchain" targetTool="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug.1073084480">
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS.160469007" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS" valueType="stringList">
+ <listOptionValue builtIn="false" value="DEVICE_CONFIGURATION_ID=Cortex M.TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="DEVICE_ENDIANNESS=little"/>
+ <listOptionValue builtIn="false" value="OUTPUT_FORMAT=ELF"/>
+ <listOptionValue builtIn="false" value="CCS_MBS_VERSION=5.1.0.01"/>
+ <listOptionValue builtIn="false" value="RUNTIME_SUPPORT_LIBRARY=libc.a"/>
+ <listOptionValue builtIn="false" value="OUTPUT_TYPE=executable"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION.1661085776" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION" value="5.0.4" valueType="string"/>
+ <targetPlatform id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformDebug.1303115512" name="Platform" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformDebug"/>
+ <builder buildPath="${BuildDirectory}" id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderDebug.1509515591" name="GNU Make.Debug" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderDebug"/>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerDebug.1190329234" name="ARM Compiler" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerDebug">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.1107212191" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.7M4" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.77252548" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.1121856809" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.eabi" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.583740022" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.FPv4SPD16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL.1814993190" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL.SYMDEBUG__DWARF" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING.544118926" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING" valueType="stringList">
+ <listOptionValue builtIn="false" value="225"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER.545482247" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.1193323017" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH.780351687" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH" valueType="includePath">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/examples/boards/ek-tm4c123gxl""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN.1717372906" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.574540398" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.on" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL.1457692358" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL.2" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC.362474831" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL.1160246656" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE.297539966" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE" valueType="definedSymbols">
+ <listOptionValue builtIn="false" value="ccs="ccs""/>
+ <listOptionValue builtIn="false" value="PART_TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="TARGET_IS_TM4C123_RA1"/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS.1920130800" name="C Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS.1139858617" name="C++ Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS.121871518" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS.584806652" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS"/>
+ </tool>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug.1073084480" name="ARM Linker" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE.2093149285" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE" value=""bitband_ccs.map"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE.1431501051" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE" value="512" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE.842157764" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE" value="0" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE.204301860" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE" value=""${ProjName}.out"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO.282485441" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO" value=""${ProjName}_linkInfo.xml"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER.1777189957" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.204317173" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH.767621390" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH" valueType="libPaths">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/lib""/>
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY.1157919691" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY" valueType="libs">
+ <listOptionValue builtIn="false" value=""libc.a""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/driverlib/ccs/Debug/driverlib.lib""/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS.1849894176" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS.668576691" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS.583608427" name="Generated Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS"/>
+ </tool>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ <cconfiguration id="com.ti.ccstudio.buildDefinitions.TMS470.Release.1787427938">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.ti.ccstudio.buildDefinitions.TMS470.Release.1787427938" moduleId="org.eclipse.cdt.core.settings" name="Release">
+ <macros>
+ <stringMacro name="SW_ROOT" type="VALUE_PATH_DIR" value="${PROJECT_ROOT}/../../../../.."/>
+ </macros>
+ <externalSettings/>
+ <extensions>
+ <extension id="com.ti.ccstudio.binaryparser.CoffParser" point="org.eclipse.cdt.core.BinaryParser"/>
+ <extension id="com.ti.ccstudio.errorparser.CoffErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.LinkErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.AsmErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactExtension="out" artifactName="${ProjName}" buildProperties="" cleanCommand="${CG_CLEAN_CMD}" description="" id="com.ti.ccstudio.buildDefinitions.TMS470.Release.1787427938" name="Release" parent="com.ti.ccstudio.buildDefinitions.TMS470.Release" postbuildStep=""${CCE_INSTALL_ROOT}/utils/tiobj2bin/tiobj2bin" "${BuildArtifactFileName}" "${BuildArtifactFileBaseName}.bin" "${CG_TOOL_ROOT}/bin/armofd" "${CG_TOOL_ROOT}/bin/armhex" "${CCE_INSTALL_ROOT}/utils/tiobj2bin/mkhex4bin"">
+ <folderInfo id="com.ti.ccstudio.buildDefinitions.TMS470.Release.1787427938." name="/" resourcePath="">
+ <toolChain id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.ReleaseToolchain.1919784450" name="TI Build Tools" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.ReleaseToolchain" targetTool="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease.940458562">
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS.1391497299" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS" valueType="stringList">
+ <listOptionValue builtIn="false" value="DEVICE_CONFIGURATION_ID=Cortex M.TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="DEVICE_ENDIANNESS=little"/>
+ <listOptionValue builtIn="false" value="OUTPUT_FORMAT=ELF"/>
+ <listOptionValue builtIn="false" value="CCS_MBS_VERSION=5.1.0.01"/>
+ <listOptionValue builtIn="false" value="RUNTIME_SUPPORT_LIBRARY=libc.a"/>
+ <listOptionValue builtIn="false" value="OUTPUT_TYPE=executable"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION.1382514560" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION" value="5.0.4" valueType="string"/>
+ <targetPlatform id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformRelease.838800881" name="Platform" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformRelease"/>
+ <builder buildPath="${BuildDirectory}" id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderRelease.155452498" name="GNU Make.Release" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderRelease"/>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerRelease.1329507060" name="ARM Compiler" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerRelease">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.1000391719" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.7M4" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.788918552" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.442780135" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.eabi" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.1786955380" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.FPv4SPD16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING.1972247700" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING" valueType="stringList">
+ <listOptionValue builtIn="false" value="225"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER.904133906" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.712974000" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH.613073194" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH" valueType="includePath">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/examples/boards/ek-tm4c123gxl""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN.68472934" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.2146478824" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.on" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC.863635272" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL.2029809626" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE.1558605186" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE" valueType="definedSymbols">
+ <listOptionValue builtIn="false" value="ccs="ccs""/>
+ <listOptionValue builtIn="false" value="PART_TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="TARGET_IS_TM4C123_RA1"/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS.1064280388" name="C Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS.1925288403" name="C++ Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS.357282741" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS.1902411071" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS"/>
+ </tool>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease.940458562" name="ARM Linker" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE.1088505551" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE" value=""bitband_ccs.map"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE.49439613" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE" value="512" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE.1498935475" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE" value="0" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE.1461959425" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE" value=""${ProjName}.out"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO.1029502845" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO" value=""${ProjName}_linkInfo.xml"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER.1201966106" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.899048118" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH.2012887145" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH" valueType="libPaths">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/lib""/>
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY.993826326" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY" valueType="libs">
+ <listOptionValue builtIn="false" value=""libc.a""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/driverlib/ccs/Debug/driverlib.lib""/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS.700763659" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS.2106561218" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS.1664208398" name="Generated Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS"/>
+ </tool>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <project id="bitband.com.ti.ccstudio.buildDefinitions.TMS470.ProjectType.819553416" name="ARM" projectType="com.ti.ccstudio.buildDefinitions.TMS470.ProjectType"/>
+ </storageModule>
+ <storageModule moduleId="scannerConfiguration"/>
+ <storageModule moduleId="org.eclipse.cdt.core.language.mapping">
+ <project-mappings>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.asmSource" language="com.ti.ccstudio.core.TIASMLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cHeader" language="com.ti.ccstudio.core.TIGCCLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cSource" language="com.ti.ccstudio.core.TIGCCLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cxxHeader" language="com.ti.ccstudio.core.TIGPPLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cxxSource" language="com.ti.ccstudio.core.TIGPPLanguage"/>
+ </project-mappings>
+ </storageModule>
+</cproject>
diff --git a/boards/ek-tm4c123gxl/bitband/ccs/.project b/boards/ek-tm4c123gxl/bitband/ccs/.project new file mode 100644 index 0000000..da36bff --- /dev/null +++ b/boards/ek-tm4c123gxl/bitband/ccs/.project @@ -0,0 +1,55 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+ <name>bitband</name>
+ <comment></comment>
+ <projects>
+ </projects>
+ <buildSpec>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+ <triggers>full,incremental,</triggers>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ </buildSpec>
+ <natures>
+ <nature>com.ti.ccstudio.core.ccsNature</nature>
+ <nature>org.eclipse.cdt.core.cnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+ <nature>org.eclipse.cdt.core.ccnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+ </natures>
+ <linkedResources>
+ <link>
+ <name>bitband.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/bitband/bitband.c</locationURI>
+ </link>
+ <link>
+ <name>bitband_ccs.cmd</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/bitband/bitband_ccs.cmd</locationURI>
+ </link>
+ <link>
+ <name>startup_ccs.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/bitband/startup_ccs.c</locationURI>
+ </link>
+ <link>
+ <name>utils/uartstdio.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/utils/uartstdio.c</locationURI>
+ </link>
+ </linkedResources>
+ <variableList>
+ <variable>
+ <name>SW_ROOT</name>
+ <value>$%7BPARENT-5-PROJECT_LOC%7D</value>
+ </variable>
+ </variableList>
+</projectDescription>
diff --git a/boards/ek-tm4c123gxl/bitband/ccs/.settings/org.eclipse.cdt.codan.core.prefs b/boards/ek-tm4c123gxl/bitband/ccs/.settings/org.eclipse.cdt.codan.core.prefs new file mode 100644 index 0000000..98b6350 --- /dev/null +++ b/boards/ek-tm4c123gxl/bitband/ccs/.settings/org.eclipse.cdt.codan.core.prefs @@ -0,0 +1,3 @@ +eclipse.preferences.version=1
+inEditor=false
+onBuild=false
diff --git a/boards/ek-tm4c123gxl/bitband/ccs/Debug/bitband.bin b/boards/ek-tm4c123gxl/bitband/ccs/Debug/bitband.bin Binary files differnew file mode 100644 index 0000000..1b71231 --- /dev/null +++ b/boards/ek-tm4c123gxl/bitband/ccs/Debug/bitband.bin diff --git a/boards/ek-tm4c123gxl/bitband/ccs/Debug/bitband.out b/boards/ek-tm4c123gxl/bitband/ccs/Debug/bitband.out Binary files differnew file mode 100644 index 0000000..eefa250 --- /dev/null +++ b/boards/ek-tm4c123gxl/bitband/ccs/Debug/bitband.out diff --git a/boards/ek-tm4c123gxl/bitband/ccs/macros.ini_initial b/boards/ek-tm4c123gxl/bitband/ccs/macros.ini_initial new file mode 100644 index 0000000..31214b5 --- /dev/null +++ b/boards/ek-tm4c123gxl/bitband/ccs/macros.ini_initial @@ -0,0 +1 @@ +SW_ROOT = ../../../../..
diff --git a/boards/ek-tm4c123gxl/bitband/ccs/target_config.ccxml b/boards/ek-tm4c123gxl/bitband/ccs/target_config.ccxml new file mode 100644 index 0000000..be4342a --- /dev/null +++ b/boards/ek-tm4c123gxl/bitband/ccs/target_config.ccxml @@ -0,0 +1,13 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<configurations XML_version="1.2" id="configurations_0">
+ <configuration XML_version="1.2" id="Stellaris In-Circuit Debug Interface_0">
+ <instance XML_version="1.2" desc="Stellaris In-Circuit Debug Interface_0" href="connections/Stellaris_ICDI_Connection.xml" id="Stellaris In-Circuit Debug Interface_0" xml="Stellaris_ICDI_Connection.xml" xmlpath="connections"/>
+ <connection XML_version="1.2" id="Stellaris In-Circuit Debug Interface_0">
+ <instance XML_version="1.2" href="drivers/stellaris_cs_dap.xml" id="drivers" xml="stellaris_cs_dap.xml" xmlpath="drivers"/>
+ <instance XML_version="1.2" href="drivers/stellaris_cortex_m4.xml" id="drivers" xml="stellaris_cortex_m4.xml" xmlpath="drivers"/>
+ <platform XML_version="1.2" id="platform_0">
+ <instance XML_version="1.2" desc="Stellaris TM4C123GH6PM_0" href="devices/tm4c123gh6pm.xml" id="Stellaris TM4C123GH6PM_0" xml="tm4c123gh6pm.xml" xmlpath="devices"/>
+ </platform>
+ </connection>
+ </configuration>
+</configurations>
diff --git a/boards/ek-tm4c123gxl/bitband/ewarm/Exe/bitband.bin b/boards/ek-tm4c123gxl/bitband/ewarm/Exe/bitband.bin Binary files differnew file mode 100644 index 0000000..4af9f67 --- /dev/null +++ b/boards/ek-tm4c123gxl/bitband/ewarm/Exe/bitband.bin diff --git a/boards/ek-tm4c123gxl/bitband/ewarm/Exe/bitband.out b/boards/ek-tm4c123gxl/bitband/ewarm/Exe/bitband.out Binary files differnew file mode 100644 index 0000000..9a0e84c --- /dev/null +++ b/boards/ek-tm4c123gxl/bitband/ewarm/Exe/bitband.out diff --git a/boards/ek-tm4c123gxl/bitband/gcc/bitband.axf b/boards/ek-tm4c123gxl/bitband/gcc/bitband.axf Binary files differnew file mode 100644 index 0000000..3142595 --- /dev/null +++ b/boards/ek-tm4c123gxl/bitband/gcc/bitband.axf diff --git a/boards/ek-tm4c123gxl/bitband/gcc/bitband.bin b/boards/ek-tm4c123gxl/bitband/gcc/bitband.bin Binary files differnew file mode 100644 index 0000000..1f3be4b --- /dev/null +++ b/boards/ek-tm4c123gxl/bitband/gcc/bitband.bin diff --git a/boards/ek-tm4c123gxl/bitband/readme.txt b/boards/ek-tm4c123gxl/bitband/readme.txt new file mode 100644 index 0000000..95c70ae --- /dev/null +++ b/boards/ek-tm4c123gxl/bitband/readme.txt @@ -0,0 +1,29 @@ +Bit-Banding
+
+This example application demonstrates the use of the bit-banding
+capabilities of the Cortex-M4F microprocessor. All of SRAM and all of the
+peripherals reside within bit-band regions, meaning that bit-banding
+operations can be applied to any of them. In this example, a variable in
+SRAM is set to a particular value one bit at a time using bit-banding
+operations (it would be more efficient to do a single non-bit-banded write;
+this simply demonstrates the operation of bit-banding).
+
+-------------------------------------------------------------------------------
+
+Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+Software License Agreement
+
+Texas Instruments (TI) is supplying this software for use solely and
+exclusively on TI's microcontroller products. The software is owned by
+TI and/or its suppliers, and is protected under applicable copyright
+laws. You may not combine this software with "viral" open-source
+software in order to form a larger program.
+
+THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+DAMAGES, FOR ANY REASON WHATSOEVER.
+
+This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
diff --git a/boards/ek-tm4c123gxl/bitband/rvmdk/bitband.axf b/boards/ek-tm4c123gxl/bitband/rvmdk/bitband.axf Binary files differnew file mode 100644 index 0000000..b191a91 --- /dev/null +++ b/boards/ek-tm4c123gxl/bitband/rvmdk/bitband.axf diff --git a/boards/ek-tm4c123gxl/bitband/rvmdk/bitband.bin b/boards/ek-tm4c123gxl/bitband/rvmdk/bitband.bin Binary files differnew file mode 100644 index 0000000..56a7f13 --- /dev/null +++ b/boards/ek-tm4c123gxl/bitband/rvmdk/bitband.bin diff --git a/boards/ek-tm4c123gxl/bitband/startup_ccs.c b/boards/ek-tm4c123gxl/bitband/startup_ccs.c new file mode 100644 index 0000000..ca18035 --- /dev/null +++ b/boards/ek-tm4c123gxl/bitband/startup_ccs.c @@ -0,0 +1,295 @@ +//*****************************************************************************
+//
+// startup_ccs.c - Startup code for use with TI's Code Composer Studio.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// External declaration for the reset handler that is to be called when the
+// processor is started
+//
+//*****************************************************************************
+extern void _c_int00(void);
+
+//*****************************************************************************
+//
+// Linker variable that marks the top of the stack.
+//
+//*****************************************************************************
+extern uint32_t __STACK_TOP;
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000 or at the start of
+// the program if located at a start address other than 0.
+//
+//*****************************************************************************
+#pragma DATA_SECTION(g_pfnVectors, ".intvecs")
+void (* const g_pfnVectors[])(void) =
+{
+ (void (*)(void))((uint32_t)&__STACK_TOP),
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ IntDefaultHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ IntDefaultHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ IntDefaultHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ //
+ // Jump to the CCS C initialization routine. This will enable the
+ // floating-point unit as well, so that does not need to be done here.
+ //
+ __asm(" .global _c_int00\n"
+ " b.w _c_int00");
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/bitband/startup_ewarm.c b/boards/ek-tm4c123gxl/bitband/startup_ewarm.c new file mode 100644 index 0000000..8d8e1a9 --- /dev/null +++ b/boards/ek-tm4c123gxl/bitband/startup_ewarm.c @@ -0,0 +1,326 @@ +//*****************************************************************************
+//
+// startup_ewarm.c - Startup code for use with IAR's Embedded Workbench,
+// version 5.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Enable the IAR extensions for this source file.
+//
+//*****************************************************************************
+#pragma language=extended
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// The entry point for the application startup code.
+//
+//*****************************************************************************
+extern void __iar_program_start(void);
+
+//*****************************************************************************
+//
+// Reserve space for the system stack.
+//
+//*****************************************************************************
+static uint32_t pui32Stack[128] @ ".noinit";
+
+//*****************************************************************************
+//
+// A union that describes the entries of the vector table. The union is needed
+// since the first entry is the stack pointer and the remainder are function
+// pointers.
+//
+//*****************************************************************************
+typedef union
+{
+ void (*pfnHandler)(void);
+ uint32_t ui32Ptr;
+}
+uVectorEntry;
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000.
+//
+//*****************************************************************************
+__root const uVectorEntry __vector_table[] @ ".intvec" =
+{
+ { .ui32Ptr = (uint32_t)pui32Stack + sizeof(pui32Stack) },
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ IntDefaultHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ IntDefaultHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ IntDefaultHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ //
+ // Enable the floating-point unit. This must be done here to handle the
+ // case where main() uses floating-point and the function prologue saves
+ // floating-point registers (which will fault if floating-point is not
+ // enabled). Any configuration of the floating-point unit using DriverLib
+ // APIs must be done here prior to the floating-point unit being enabled.
+ //
+ // Note that this does not use DriverLib since it might not be included in
+ // this project.
+ //
+ HWREG(NVIC_CPAC) = ((HWREG(NVIC_CPAC) &
+ ~(NVIC_CPAC_CP10_M | NVIC_CPAC_CP11_M)) |
+ NVIC_CPAC_CP10_FULL | NVIC_CPAC_CP11_FULL);
+
+ //
+ // Call the application's entry point.
+ //
+ __iar_program_start();
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/bitband/startup_gcc.c b/boards/ek-tm4c123gxl/bitband/startup_gcc.c new file mode 100644 index 0000000..d164864 --- /dev/null +++ b/boards/ek-tm4c123gxl/bitband/startup_gcc.c @@ -0,0 +1,342 @@ +//*****************************************************************************
+//
+// startup_gcc.c - Startup code for use with GNU tools.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// The entry point for the application.
+//
+//*****************************************************************************
+extern int main(void);
+
+//*****************************************************************************
+//
+// Reserve space for the system stack.
+//
+//*****************************************************************************
+static uint32_t pui32Stack[128];
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000.
+//
+//*****************************************************************************
+__attribute__ ((section(".isr_vector")))
+void (* const g_pfnVectors[])(void) =
+{
+ (void (*)(void))((uint32_t)pui32Stack + sizeof(pui32Stack)),
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ IntDefaultHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ IntDefaultHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ IntDefaultHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// The following are constructs created by the linker, indicating where the
+// the "data" and "bss" segments reside in memory. The initializers for the
+// for the "data" segment resides immediately following the "text" segment.
+//
+//*****************************************************************************
+extern uint32_t _etext;
+extern uint32_t _data;
+extern uint32_t _edata;
+extern uint32_t _bss;
+extern uint32_t _ebss;
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ uint32_t *pui32Src, *pui32Dest;
+
+ //
+ // Copy the data segment initializers from flash to SRAM.
+ //
+ pui32Src = &_etext;
+ for(pui32Dest = &_data; pui32Dest < &_edata; )
+ {
+ *pui32Dest++ = *pui32Src++;
+ }
+
+ //
+ // Zero fill the bss segment.
+ //
+ __asm(" ldr r0, =_bss\n"
+ " ldr r1, =_ebss\n"
+ " mov r2, #0\n"
+ " .thumb_func\n"
+ "zero_loop:\n"
+ " cmp r0, r1\n"
+ " it lt\n"
+ " strlt r2, [r0], #4\n"
+ " blt zero_loop");
+
+ //
+ // Enable the floating-point unit. This must be done here to handle the
+ // case where main() uses floating-point and the function prologue saves
+ // floating-point registers (which will fault if floating-point is not
+ // enabled). Any configuration of the floating-point unit using DriverLib
+ // APIs must be done here prior to the floating-point unit being enabled.
+ //
+ // Note that this does not use DriverLib since it might not be included in
+ // this project.
+ //
+ HWREG(NVIC_CPAC) = ((HWREG(NVIC_CPAC) &
+ ~(NVIC_CPAC_CP10_M | NVIC_CPAC_CP11_M)) |
+ NVIC_CPAC_CP10_FULL | NVIC_CPAC_CP11_FULL);
+
+ //
+ // Call the application's entry point.
+ //
+ main();
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/bitband/startup_rvmdk.S b/boards/ek-tm4c123gxl/bitband/startup_rvmdk.S new file mode 100644 index 0000000..37cd427 --- /dev/null +++ b/boards/ek-tm4c123gxl/bitband/startup_rvmdk.S @@ -0,0 +1,351 @@ +; <<< Use Configuration Wizard in Context Menu >>>
+;******************************************************************************
+;
+; startup_rvmdk.S - Startup code for use with Keil's uVision.
+;
+; Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+; Software License Agreement
+;
+; Texas Instruments (TI) is supplying this software for use solely and
+; exclusively on TI's microcontroller products. The software is owned by
+; TI and/or its suppliers, and is protected under applicable copyright
+; laws. You may not combine this software with "viral" open-source
+; software in order to form a larger program.
+;
+; THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+; NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+; NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+; A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+; CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+; DAMAGES, FOR ANY REASON WHATSOEVER.
+;
+; This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+;
+;******************************************************************************
+
+;******************************************************************************
+;
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+;******************************************************************************
+Stack EQU 0x00000200
+
+;******************************************************************************
+;
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+;******************************************************************************
+Heap EQU 0x00000000
+
+;******************************************************************************
+;
+; Allocate space for the stack.
+;
+;******************************************************************************
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+StackMem
+ SPACE Stack
+__initial_sp
+
+;******************************************************************************
+;
+; Allocate space for the heap.
+;
+;******************************************************************************
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+HeapMem
+ SPACE Heap
+__heap_limit
+
+;******************************************************************************
+;
+; Indicate that the code in this file preserves 8-byte alignment of the stack.
+;
+;******************************************************************************
+ PRESERVE8
+
+;******************************************************************************
+;
+; Place code into the reset code section.
+;
+;******************************************************************************
+ AREA RESET, CODE, READONLY
+ THUMB
+
+;******************************************************************************
+;
+; The vector table.
+;
+;******************************************************************************
+ EXPORT __Vectors
+__Vectors
+ DCD StackMem + Stack ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NmiSR ; NMI Handler
+ DCD FaultISR ; Hard Fault Handler
+ DCD IntDefaultHandler ; The MPU fault handler
+ DCD IntDefaultHandler ; The bus fault handler
+ DCD IntDefaultHandler ; The usage fault handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; SVCall handler
+ DCD IntDefaultHandler ; Debug monitor handler
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; The PendSV handler
+ DCD IntDefaultHandler ; The SysTick handler
+ DCD IntDefaultHandler ; GPIO Port A
+ DCD IntDefaultHandler ; GPIO Port B
+ DCD IntDefaultHandler ; GPIO Port C
+ DCD IntDefaultHandler ; GPIO Port D
+ DCD IntDefaultHandler ; GPIO Port E
+ DCD IntDefaultHandler ; UART0 Rx and Tx
+ DCD IntDefaultHandler ; UART1 Rx and Tx
+ DCD IntDefaultHandler ; SSI0 Rx and Tx
+ DCD IntDefaultHandler ; I2C0 Master and Slave
+ DCD IntDefaultHandler ; PWM Fault
+ DCD IntDefaultHandler ; PWM Generator 0
+ DCD IntDefaultHandler ; PWM Generator 1
+ DCD IntDefaultHandler ; PWM Generator 2
+ DCD IntDefaultHandler ; Quadrature Encoder 0
+ DCD IntDefaultHandler ; ADC Sequence 0
+ DCD IntDefaultHandler ; ADC Sequence 1
+ DCD IntDefaultHandler ; ADC Sequence 2
+ DCD IntDefaultHandler ; ADC Sequence 3
+ DCD IntDefaultHandler ; Watchdog timer
+ DCD IntDefaultHandler ; Timer 0 subtimer A
+ DCD IntDefaultHandler ; Timer 0 subtimer B
+ DCD IntDefaultHandler ; Timer 1 subtimer A
+ DCD IntDefaultHandler ; Timer 1 subtimer B
+ DCD IntDefaultHandler ; Timer 2 subtimer A
+ DCD IntDefaultHandler ; Timer 2 subtimer B
+ DCD IntDefaultHandler ; Analog Comparator 0
+ DCD IntDefaultHandler ; Analog Comparator 1
+ DCD IntDefaultHandler ; Analog Comparator 2
+ DCD IntDefaultHandler ; System Control (PLL, OSC, BO)
+ DCD IntDefaultHandler ; FLASH Control
+ DCD IntDefaultHandler ; GPIO Port F
+ DCD IntDefaultHandler ; GPIO Port G
+ DCD IntDefaultHandler ; GPIO Port H
+ DCD IntDefaultHandler ; UART2 Rx and Tx
+ DCD IntDefaultHandler ; SSI1 Rx and Tx
+ DCD IntDefaultHandler ; Timer 3 subtimer A
+ DCD IntDefaultHandler ; Timer 3 subtimer B
+ DCD IntDefaultHandler ; I2C1 Master and Slave
+ DCD IntDefaultHandler ; Quadrature Encoder 1
+ DCD IntDefaultHandler ; CAN0
+ DCD IntDefaultHandler ; CAN1
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; Hibernate
+ DCD IntDefaultHandler ; USB0
+ DCD IntDefaultHandler ; PWM Generator 3
+ DCD IntDefaultHandler ; uDMA Software Transfer
+ DCD IntDefaultHandler ; uDMA Error
+ DCD IntDefaultHandler ; ADC1 Sequence 0
+ DCD IntDefaultHandler ; ADC1 Sequence 1
+ DCD IntDefaultHandler ; ADC1 Sequence 2
+ DCD IntDefaultHandler ; ADC1 Sequence 3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; GPIO Port J
+ DCD IntDefaultHandler ; GPIO Port K
+ DCD IntDefaultHandler ; GPIO Port L
+ DCD IntDefaultHandler ; SSI2 Rx and Tx
+ DCD IntDefaultHandler ; SSI3 Rx and Tx
+ DCD IntDefaultHandler ; UART3 Rx and Tx
+ DCD IntDefaultHandler ; UART4 Rx and Tx
+ DCD IntDefaultHandler ; UART5 Rx and Tx
+ DCD IntDefaultHandler ; UART6 Rx and Tx
+ DCD IntDefaultHandler ; UART7 Rx and Tx
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; I2C2 Master and Slave
+ DCD IntDefaultHandler ; I2C3 Master and Slave
+ DCD IntDefaultHandler ; Timer 4 subtimer A
+ DCD IntDefaultHandler ; Timer 4 subtimer B
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; Timer 5 subtimer A
+ DCD IntDefaultHandler ; Timer 5 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 0 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 0 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 1 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 1 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 2 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 2 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 3 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 3 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 4 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 4 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 5 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 5 subtimer B
+ DCD IntDefaultHandler ; FPU
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; I2C4 Master and Slave
+ DCD IntDefaultHandler ; I2C5 Master and Slave
+ DCD IntDefaultHandler ; GPIO Port M
+ DCD IntDefaultHandler ; GPIO Port N
+ DCD IntDefaultHandler ; Quadrature Encoder 2
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; GPIO Port P (Summary or P0)
+ DCD IntDefaultHandler ; GPIO Port P1
+ DCD IntDefaultHandler ; GPIO Port P2
+ DCD IntDefaultHandler ; GPIO Port P3
+ DCD IntDefaultHandler ; GPIO Port P4
+ DCD IntDefaultHandler ; GPIO Port P5
+ DCD IntDefaultHandler ; GPIO Port P6
+ DCD IntDefaultHandler ; GPIO Port P7
+ DCD IntDefaultHandler ; GPIO Port Q (Summary or Q0)
+ DCD IntDefaultHandler ; GPIO Port Q1
+ DCD IntDefaultHandler ; GPIO Port Q2
+ DCD IntDefaultHandler ; GPIO Port Q3
+ DCD IntDefaultHandler ; GPIO Port Q4
+ DCD IntDefaultHandler ; GPIO Port Q5
+ DCD IntDefaultHandler ; GPIO Port Q6
+ DCD IntDefaultHandler ; GPIO Port Q7
+ DCD IntDefaultHandler ; GPIO Port R
+ DCD IntDefaultHandler ; GPIO Port S
+ DCD IntDefaultHandler ; PWM 1 Generator 0
+ DCD IntDefaultHandler ; PWM 1 Generator 1
+ DCD IntDefaultHandler ; PWM 1 Generator 2
+ DCD IntDefaultHandler ; PWM 1 Generator 3
+ DCD IntDefaultHandler ; PWM 1 Fault
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor first starts execution
+; following a reset event.
+;
+;******************************************************************************
+ EXPORT Reset_Handler
+Reset_Handler
+ ;
+ ; Enable the floating-point unit. This must be done here to handle the
+ ; case where main() uses floating-point and the function prologue saves
+ ; floating-point registers (which will fault if floating-point is not
+ ; enabled). Any configuration of the floating-point unit using
+ ; DriverLib APIs must be done here prior to the floating-point unit
+ ; being enabled.
+ ;
+ ; Note that this does not use DriverLib since it might not be included
+ ; in this project.
+ ;
+ MOVW R0, #0xED88
+ MOVT R0, #0xE000
+ LDR R1, [R0]
+ ORR R1, #0x00F00000
+ STR R1, [R0]
+
+ ;
+ ; Call the C library enty point that handles startup. This will copy
+ ; the .data section initializers from flash to SRAM and zero fill the
+ ; .bss section.
+ ;
+ IMPORT __main
+ B __main
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives a NMI. This
+; simply enters an infinite loop, preserving the system state for examination
+; by a debugger.
+;
+;******************************************************************************
+NmiSR
+ B NmiSR
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives a fault
+; interrupt. This simply enters an infinite loop, preserving the system state
+; for examination by a debugger.
+;
+;******************************************************************************
+FaultISR
+ B FaultISR
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives an unexpected
+; interrupt. This simply enters an infinite loop, preserving the system state
+; for examination by a debugger.
+;
+;******************************************************************************
+IntDefaultHandler
+ B IntDefaultHandler
+
+;******************************************************************************
+;
+; Make sure the end of this section is aligned.
+;
+;******************************************************************************
+ ALIGN
+
+;******************************************************************************
+;
+; Some code in the normal code section for initializing the heap and stack.
+;
+;******************************************************************************
+ AREA |.text|, CODE, READONLY
+
+;******************************************************************************
+;
+; The function expected of the C library startup code for defining the stack
+; and heap memory locations. For the C library version of the startup code,
+; provide this function so that the C library initialization code can find out
+; the location of the stack and heap.
+;
+;******************************************************************************
+ IF :DEF: __MICROLIB
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+ ELSE
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+__user_initial_stackheap
+ LDR R0, =HeapMem
+ LDR R1, =(StackMem + Stack)
+ LDR R2, =(HeapMem + Heap)
+ LDR R3, =StackMem
+ BX LR
+ ENDIF
+
+;******************************************************************************
+;
+; Make sure the end of this section is aligned.
+;
+;******************************************************************************
+ ALIGN
+
+;******************************************************************************
+;
+; Tell the assembler that we're done.
+;
+;******************************************************************************
+ END
diff --git a/boards/ek-tm4c123gxl/blinky/Makefile b/boards/ek-tm4c123gxl/blinky/Makefile new file mode 100644 index 0000000..3310806 --- /dev/null +++ b/boards/ek-tm4c123gxl/blinky/Makefile @@ -0,0 +1,77 @@ +#******************************************************************************
+#
+# Makefile - Rules for building the blinky example.
+#
+# Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+# Software License Agreement
+#
+# Texas Instruments (TI) is supplying this software for use solely and
+# exclusively on TI's microcontroller products. The software is owned by
+# TI and/or its suppliers, and is protected under applicable copyright
+# laws. You may not combine this software with "viral" open-source
+# software in order to form a larger program.
+#
+# THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+# NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+# NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+# CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+# DAMAGES, FOR ANY REASON WHATSOEVER.
+#
+# This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+#
+#******************************************************************************
+
+#
+# Defines the part type that this project uses.
+#
+PART=TM4C123GH6PM
+
+#
+# The base directory for TivaWare.
+#
+ROOT=../../../..
+
+#
+# Include the common make definitions.
+#
+include ${ROOT}/makedefs
+
+#
+# Where to find header files that do not live in the source directory.
+#
+IPATH=../../../..
+
+#
+# The default rule, which causes the blinky example to be built.
+#
+all: ${COMPILER}
+all: ${COMPILER}/blinky.axf
+
+#
+# The rule to clean out all the build products.
+#
+clean:
+ @rm -rf ${COMPILER} ${wildcard *~}
+
+#
+# The rule to create the target directory.
+#
+${COMPILER}:
+ @mkdir -p ${COMPILER}
+
+#
+# Rules for building the blinky example.
+#
+${COMPILER}/blinky.axf: ${COMPILER}/blinky.o
+${COMPILER}/blinky.axf: ${COMPILER}/startup_${COMPILER}.o
+${COMPILER}/blinky.axf: blinky.ld
+SCATTERgcc_blinky=blinky.ld
+ENTRY_blinky=ResetISR
+
+#
+# Include the automatically generated dependency files.
+#
+ifneq (${MAKECMDGOALS},clean)
+-include ${wildcard ${COMPILER}/*.d} __dummy__
+endif
diff --git a/boards/ek-tm4c123gxl/blinky/blinky.c b/boards/ek-tm4c123gxl/blinky/blinky.c new file mode 100644 index 0000000..192fb54 --- /dev/null +++ b/boards/ek-tm4c123gxl/blinky/blinky.c @@ -0,0 +1,94 @@ +//*****************************************************************************
+//
+// blinky.c - Simple example to blink the on-board LED.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/tm4c123gh6pm.h"
+
+//*****************************************************************************
+//
+//! \addtogroup example_list
+//! <h1>Blinky (blinky)</h1>
+//!
+//! A very simple example that blinks the on-board LED using direct register
+//! access.
+//
+//*****************************************************************************
+
+//*****************************************************************************
+//
+// Blink the on-board LED.
+//
+//*****************************************************************************
+int
+main(void)
+{
+ volatile uint32_t ui32Loop;
+
+ //
+ // Enable the GPIO port that is used for the on-board LED.
+ //
+ SYSCTL_RCGC2_R = SYSCTL_RCGC2_GPIOF;
+
+ //
+ // Do a dummy read to insert a few cycles after enabling the peripheral.
+ //
+ ui32Loop = SYSCTL_RCGC2_R;
+
+ //
+ // Enable the GPIO pin for the LED (PF3). Set the direction as output, and
+ // enable the GPIO pin for digital function.
+ //
+ GPIO_PORTF_DIR_R = 0x08;
+ GPIO_PORTF_DEN_R = 0x08;
+
+ //
+ // Loop forever.
+ //
+ while(1)
+ {
+ //
+ // Turn on the LED.
+ //
+ GPIO_PORTF_DATA_R |= 0x08;
+
+ //
+ // Delay for a bit.
+ //
+ for(ui32Loop = 0; ui32Loop < 200000; ui32Loop++)
+ {
+ }
+
+ //
+ // Turn off the LED.
+ //
+ GPIO_PORTF_DATA_R &= ~(0x08);
+
+ //
+ // Delay for a bit.
+ //
+ for(ui32Loop = 0; ui32Loop < 200000; ui32Loop++)
+ {
+ }
+ }
+}
diff --git a/boards/ek-tm4c123gxl/blinky/blinky.ewd b/boards/ek-tm4c123gxl/blinky/blinky.ewd new file mode 100644 index 0000000..7a32408 --- /dev/null +++ b/boards/ek-tm4c123gxl/blinky/blinky.ewd @@ -0,0 +1,614 @@ +<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+ <fileVersion>1</fileVersion>
+ <configuration>
+ <name>Debug</name>
+ <toolchain>
+ <name>ARM</name>
+ </toolchain>
+ <debug>1</debug>
+ <settings>
+ <name>C-SPY</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>15</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CInput</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CEndian</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCVariant</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>MemOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MemFile</name>
+ <state>$TOOLKIT_DIR$\CONFIG\debugger\TexasInstruments\tm4c123gh6pm</state>
+ </option>
+ <option>
+ <name>RunToEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>RunToName</name>
+ <state>main</state>
+ </option>
+ <option>
+ <name>CExtraOptionsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCDDFArgumentProducer</name>
+ <state></state>
+ </option>
+ <option>
+ <name>OCDownloadSuppressDownload</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDownloadVerifyAll</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OCDynDriverList</name>
+ <state>LMIFTDI_ID</state>
+ </option>
+ <option>
+ <name>OCLastSavedByProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OCDownloadAttachToProgram</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FlashLoaders</name>
+ <state>,,,,(default),</state>
+ </option>
+ <option>
+ <name>UseFlashLoader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CLowLevel</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCBE8Slave</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ARMSIM_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCSimDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCSimEnablePSP</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCSimPspOverrideConfig</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCSimPspConfigFile</name>
+ <state></state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ANGEL_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CCAngelHeartbeat</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CAngelCommunication</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CAngelCommBaud</name>
+ <version>0</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>CAngelCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ANGELTCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoAngelLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AngelLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>GDBSERVER_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>TCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>LogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCJTagBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>IARROM_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CRomLogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomLogFileEditB</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CRomCommunication</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomCommBaud</name>
+ <version>0</version>
+ <state>7</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>JLINK_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>9</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>JLinkSpeed</name>
+ <state>32</state>
+ </option>
+ <option>
+ <name>CCJLinkDoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCJLinkHWResetDelay</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>JLinkInitialSpeed</name>
+ <state>32</state>
+ </option>
+ <option>
+ <name>CCDoJlinkMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCScanChainNonARMDevices</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkIRLength</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkCommRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkTCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>CCJLinkSpeedRadioV2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCUSBDevice</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchUndef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchSWI</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchData</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchPrefetch</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchIRQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchFIQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ <option>
+ <name>CCJLinkInterfaceRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCJLinkAttachSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCJLinkResetList</name>
+ <version>0</version>
+ <state>5</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>LMIFTDI_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>LmiftdiSpeed</name>
+ <state>500</state>
+ </option>
+ <option>
+ <name>CCLmiftdiDoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCLmiftdiLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>MACRAIGOR_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>2</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>jtag</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>EmuSpeed</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>TCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>LogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>DoEmuMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>EmuMultiTarget</name>
+ <state>0@ARM7TDMI</state>
+ </option>
+ <option>
+ <name>EmuHWReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CEmuCommBaud</name>
+ <version>0</version>
+ <state>4</state>
+ </option>
+ <option>
+ <name>CEmuCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>jtago</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>UnusedAddr</name>
+ <state>0x00800000</state>
+ </option>
+ <option>
+ <name>CCMacraigorHWResetDelay</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCJTagBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>RDI_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CRDIDriverDll</name>
+ <state>Browse to your RDI driver</state>
+ </option>
+ <option>
+ <name>CRDILogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRDILogFileEdit</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCRDIHWReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchUndef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchSWI</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchData</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchPrefetch</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchIRQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchFIQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDIUseETM</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>THIRDPARTY_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CThirdPartyDriverDll</name>
+ <state>Browse to your third-party driver</state>
+ </option>
+ <option>
+ <name>CThirdPartyLogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CThirdPartyLogFileEditB</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <debuggerPlugins>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\OSE\OseEpsilonPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Profiling\Profiling.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ </debuggerPlugins>
+ </configuration>
+</project>
diff --git a/boards/ek-tm4c123gxl/blinky/blinky.ewp b/boards/ek-tm4c123gxl/blinky/blinky.ewp new file mode 100644 index 0000000..5950d61 --- /dev/null +++ b/boards/ek-tm4c123gxl/blinky/blinky.ewp @@ -0,0 +1,777 @@ +<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+ <fileVersion>1</fileVersion>
+ <configuration>
+ <name>Debug</name>
+ <toolchain>
+ <name>ARM</name>
+ </toolchain>
+ <debug>1</debug>
+ <settings>
+ <name>General</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <version>14</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>ExePath</name>
+ <state>ewarm\Exe</state>
+ </option>
+ <option>
+ <name>ObjPath</name>
+ <state>ewarm\Obj</state>
+ </option>
+ <option>
+ <name>ListPath</name>
+ <state>ewarm\List</state>
+ </option>
+ <option>
+ <name>Variant</name>
+ <version>19</version>
+ <state>39</state>
+ </option>
+ <option>
+ <name>GEndianMode</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>Input variant</name>
+ <version>1</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>Input description</name>
+ <state>No specifier n, no float nor long long, no scan set, no assignment suppressing.</state>
+ </option>
+ <option>
+ <name>Output variant</name>
+ <version>0</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>Output description</name>
+ <state>No specifier a, A, no specifier n, no float nor long long, no flags.</state>
+ </option>
+ <option>
+ <name>GOutputBinary</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FPU</name>
+ <version>2</version>
+ <state>5</state>
+ </option>
+ <option>
+ <name>OGCoreOrChip</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelect</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelectSlave</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>RTDescription</name>
+ <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+ </option>
+ <option>
+ <name>RTConfigPath</name>
+ <state>$TOOLKIT_DIR$\INC\DLib_Config_Normal.h</state>
+ </option>
+ <option>
+ <name>OGProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OGLastSavedByProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>GeneralMisraRules</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>GeneralEnableMisra</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GeneralMisraVerbose</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGChipSelectEditMenu</name>
+ <state>TM4C123GH6PM TexasInstruments TM4C123GH6PM</state>
+ </option>
+ <option>
+ <name>GenLowLevelInterface</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GEndianModeBE</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OGBufferedTerminalOutput</name>
+ <state>0</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ICCARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>19</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CCDefines</name>
+ <state>ewarm</state>
+ <state>PART_TM4C123GH6PM</state>
+ </option>
+ <option>
+ <name>CCPreprocFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocComments</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMnemonics</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMessages</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssSource</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagSuppress</name>
+ <state>Pa050</state>
+ </option>
+ <option>
+ <name>CCDiagRemark</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCDiagWarning</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCDiagError</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCAllowList</name>
+ <version>1</version>
+ <state>1111111</state>
+ </option>
+ <option>
+ <name>CCDebugInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IEndianMode</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IExtraOptionsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCLangConformance</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCSignedPlainChar</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCRequirePrototypes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagWarnAreErr</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCCompilerRuntimeInfo</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OutputFile</name>
+ <state>$FILE_BNAME$.o</state>
+ </option>
+ <option>
+ <name>CCLangSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCLibConfigHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>PreInclude</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CompilerMisraRules</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>CompilerMisraOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCIncludePath2</name>
+ <state>$PROJ_DIR$\..\..\..\..</state>
+ </option>
+ <option>
+ <name>CCStdIncCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCStdIncludePath</name>
+ <state>$TOOLKIT_DIR$\INC\</state>
+ </option>
+ <option>
+ <name>CCCodeSection</name>
+ <state>.text</state>
+ </option>
+ <option>
+ <name>IInterwork2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IProcessorMode2</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptLevel</name>
+ <state>3</state>
+ </option>
+ <option>
+ <name>CCOptStrategy</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptLevelSlave</name>
+ <state>3</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>AARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>7</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>AObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AEndian</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>ACaseSensitivity</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacroChars</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnEnable</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnWhat</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnOne</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AWarnRange1</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AWarnRange2</name>
+ <state></state>
+ </option>
+ <option>
+ <name>ADebug</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AltRegisterNames</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ADefines</name>
+ <state>ewarm</state>
+ </option>
+ <option>
+ <name>AList</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AListHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AListing</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>Includes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacDefs</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacExps</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacExec</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OnlyAssed</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MultiLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLengthCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLength</name>
+ <state>80</state>
+ </option>
+ <option>
+ <name>TabSpacing</name>
+ <state>8</state>
+ </option>
+ <option>
+ <name>AXRef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDefines</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefInternal</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDual</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AOutputFile</name>
+ <state>$FILE_BNAME$.o</state>
+ </option>
+ <option>
+ <name>AMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ALimitErrorsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ALimitErrorsEdit</name>
+ <state>100</state>
+ </option>
+ <option>
+ <name>AIgnoreStdInclude</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AStdIncludes</name>
+ <state>$TOOLKIT_DIR$\INC\</state>
+ </option>
+ <option>
+ <name>AUserIncludes</name>
+ <state>$PROJ_DIR$\..\..\..\..</state>
+ </option>
+ <option>
+ <name>AExtraOptionsCheckV2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AExtraOptionsV2</name>
+ <state></state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>OBJCOPY</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OOCOutputFormat</name>
+ <version>1</version>
+ <state>2</state>
+ </option>
+ <option>
+ <name>OCOutputOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OOCOutputFile</name>
+ <state>blinky.bin</state>
+ </option>
+ <option>
+ <name>OOCCommandLineProducer</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OOCObjCopyEnable</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>CUSTOM</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <extensions></extensions>
+ <cmdline></cmdline>
+ </data>
+ </settings>
+ <settings>
+ <name>BICOMP</name>
+ <archiveVersion>0</archiveVersion>
+ <data/>
+ </settings>
+ <settings>
+ <name>BUILDACTION</name>
+ <archiveVersion>1</archiveVersion>
+ <data>
+ <prebuild></prebuild>
+ <postbuild></postbuild>
+ </data>
+ </settings>
+ <settings>
+ <name>ILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>5</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>IlinkLibIOConfig</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>XLinkMisraHandler</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkInputFileSlave</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkOutputFile</name>
+ <state>blinky.out</state>
+ </option>
+ <option>
+ <name>IlinkDebugInfoEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkKeepSymbols</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinaryFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinarySymbol</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinarySegment</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinaryAlign</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkDefines</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkConfigDefines</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkMapFile</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkLogFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogInitialization</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogModule</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogSection</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogVeneer</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkIcfOverride</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkIcfFile</name>
+ <state>$PROJ_DIR$\blinky.icf</state>
+ </option>
+ <option>
+ <name>IlinkIcfFileSlave</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkSuppressDiags</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsRem</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsWarn</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsErr</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkWarningsAreErrors</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkUseExtraOptions</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkLowLevelInterfaceSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAutoLibEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAdditionalLibs</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkOverrideProgramEntryLabel</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabelSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabel</name>
+ <state>__iar_program_start</state>
+ </option>
+ <option>
+ <name>IlinkNXPLPCChecksum</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>DoFill</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FillerByte</name>
+ <state>0xFF</state>
+ </option>
+ <option>
+ <name>FillerStart</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>FillerEnd</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>CrcSize</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcAlign</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcAlgo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcPoly</name>
+ <state>0x11021</state>
+ </option>
+ <option>
+ <name>CrcCompl</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcBitOrder</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcInitialValue</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>DoCrc</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkBE8Slave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkBufferedTerminalOutput</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>IARCHIVE</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>IarchiveInputs</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IarchiveOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IarchiveOutput</name>
+ <state>###Unitialized###</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>BILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data/>
+ </settings>
+ </configuration>
+ <group>
+ <name>Source</name>
+ <file>
+ <name>$PROJ_DIR$\blinky.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\startup_ewarm.c</name>
+ </file>
+ </group>
+</project>
diff --git a/boards/ek-tm4c123gxl/blinky/blinky.icf b/boards/ek-tm4c123gxl/blinky/blinky.icf new file mode 100644 index 0000000..7bd52bf --- /dev/null +++ b/boards/ek-tm4c123gxl/blinky/blinky.icf @@ -0,0 +1,78 @@ +//*****************************************************************************
+//
+// blinky.icf - Linker configuration file for blinky.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+//
+// Define a memory region that covers the entire 4 GB addressible space of the
+// processor.
+//
+define memory mem with size = 4G;
+
+//
+// Define a region for the on-chip flash.
+//
+define region FLASH = mem:[from 0x00000000 to 0x0003ffff];
+
+//
+// Define a region for the on-chip SRAM.
+//
+define region SRAM = mem:[from 0x20000000 to 0x20007fff];
+
+//
+// Define a block for the heap. The size should be set to something other
+// than zero if things in the C library that require the heap are used.
+//
+define block HEAP with alignment = 8, size = 0x00000000 { };
+
+//
+// Indicate that the read/write values should be initialized by copying from
+// flash.
+//
+initialize by copy { readwrite };
+
+//
+// Indicate that the noinit values should be left alone. This includes the
+// stack, which if initialized will destroy the return address from the
+// initialization code, causing the processor to branch to zero and fault.
+//
+do not initialize { section .noinit };
+
+//
+// Place the interrupt vectors at the start of flash.
+//
+place at start of FLASH { readonly section .intvec };
+
+//
+// Place the remainder of the read-only items into flash.
+//
+place in FLASH { readonly };
+
+//
+// Place the RAM vector table at the start of SRAM.
+//
+place at start of SRAM { section VTABLE };
+
+//
+// Place all read/write items into SRAM.
+//
+place in SRAM { readwrite, block HEAP };
diff --git a/boards/ek-tm4c123gxl/blinky/blinky.ld b/boards/ek-tm4c123gxl/blinky/blinky.ld new file mode 100644 index 0000000..fce9ac0 --- /dev/null +++ b/boards/ek-tm4c123gxl/blinky/blinky.ld @@ -0,0 +1,57 @@ +/******************************************************************************
+ *
+ * blinky.ld - Linker configuration file for blinky.
+ *
+ * Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+ * Software License Agreement
+ *
+ * Texas Instruments (TI) is supplying this software for use solely and
+ * exclusively on TI's microcontroller products. The software is owned by
+ * TI and/or its suppliers, and is protected under applicable copyright
+ * laws. You may not combine this software with "viral" open-source
+ * software in order to form a larger program.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+ * NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+ * NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+ * CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+ * DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ * This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+ *
+ *****************************************************************************/
+
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x00040000
+ SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000
+}
+
+SECTIONS
+{
+ .text :
+ {
+ _text = .;
+ KEEP(*(.isr_vector))
+ *(.text*)
+ *(.rodata*)
+ _etext = .;
+ } > FLASH
+
+ .data : AT(ADDR(.text) + SIZEOF(.text))
+ {
+ _data = .;
+ *(vtable)
+ *(.data*)
+ _edata = .;
+ } > SRAM
+
+ .bss :
+ {
+ _bss = .;
+ *(.bss*)
+ *(COMMON)
+ _ebss = .;
+ } > SRAM
+}
diff --git a/boards/ek-tm4c123gxl/blinky/blinky.sct b/boards/ek-tm4c123gxl/blinky/blinky.sct new file mode 100644 index 0000000..82aef6f --- /dev/null +++ b/boards/ek-tm4c123gxl/blinky/blinky.sct @@ -0,0 +1,47 @@ +;******************************************************************************
+;
+; blinky.sct - Linker configuration file for blinky.
+;
+; Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+; Software License Agreement
+;
+; Texas Instruments (TI) is supplying this software for use solely and
+; exclusively on TI's microcontroller products. The software is owned by
+; TI and/or its suppliers, and is protected under applicable copyright
+; laws. You may not combine this software with "viral" open-source
+; software in order to form a larger program.
+;
+; THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+; NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+; NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+; A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+; CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+; DAMAGES, FOR ANY REASON WHATSOEVER.
+;
+; This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+;
+;******************************************************************************
+
+LR_IROM 0x00000000 0x00040000
+{
+ ;
+ ; Specify the Execution Address of the code and the size.
+ ;
+ ER_IROM 0x00000000 0x00040000
+ {
+ *.o (RESET, +First)
+ * (InRoot$$Sections, +RO)
+ }
+
+ ;
+ ; Specify the Execution Address of the data area.
+ ;
+ RW_IRAM 0x20000000 0x00008000
+ {
+ ;
+ ; Uncomment the following line in order to use IntRegister().
+ ;
+ ;* (vtable, +First)
+ * (+RW, +ZI)
+ }
+}
diff --git a/boards/ek-tm4c123gxl/blinky/blinky.uvopt b/boards/ek-tm4c123gxl/blinky/blinky.uvopt new file mode 100644 index 0000000..f9ea768 --- /dev/null +++ b/boards/ek-tm4c123gxl/blinky/blinky.uvopt @@ -0,0 +1,268 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+ <SchemaVersion>1.0</SchemaVersion>
+
+ <Header>### uVision Project, (C) Keil Software</Header>
+
+ <Extensions>
+ <cExt>*.c</cExt>
+ <aExt>*.s*; *.src; *.a*</aExt>
+ <oExt>*.obj</oExt>
+ <lExt>*.lib</lExt>
+ <tExt>*.txt; *.h; *.inc</tExt>
+ <pExt>*.plm</pExt>
+ <CppX>*.cpp</CppX>
+ </Extensions>
+
+ <DaveTm>
+ <dwLowDateTime>0</dwLowDateTime>
+ <dwHighDateTime>0</dwHighDateTime>
+ </DaveTm>
+
+ <Target>
+ <TargetName>blinky</TargetName>
+ <ToolsetNumber>0x4</ToolsetNumber>
+ <ToolsetName>ARM-ADS</ToolsetName>
+ <TargetOption>
+ <CLKADS>8000000</CLKADS>
+ <OPTTT>
+ <gFlags>1</gFlags>
+ <BeepAtEnd>1</BeepAtEnd>
+ <RunSim>1</RunSim>
+ <RunTarget>0</RunTarget>
+ </OPTTT>
+ <OPTHX>
+ <HexSelection>1</HexSelection>
+ <FlashByte>65535</FlashByte>
+ <HexRangeLowAddress>0</HexRangeLowAddress>
+ <HexRangeHighAddress>0</HexRangeHighAddress>
+ <HexOffset>0</HexOffset>
+ </OPTHX>
+ <OPTLEX>
+ <PageWidth>79</PageWidth>
+ <PageLength>66</PageLength>
+ <TabStop>8</TabStop>
+ <ListingPath>.\rvmdk\</ListingPath>
+ </OPTLEX>
+ <ListingPage>
+ <CreateCListing>1</CreateCListing>
+ <CreateAListing>1</CreateAListing>
+ <CreateLListing>1</CreateLListing>
+ <CreateIListing>0</CreateIListing>
+ <AsmCond>1</AsmCond>
+ <AsmSymb>1</AsmSymb>
+ <AsmXref>0</AsmXref>
+ <CCond>1</CCond>
+ <CCode>0</CCode>
+ <CListInc>0</CListInc>
+ <CSymb>0</CSymb>
+ <LinkerCodeListing>0</LinkerCodeListing>
+ </ListingPage>
+ <OPTXL>
+ <LMap>1</LMap>
+ <LComments>1</LComments>
+ <LGenerateSymbols>1</LGenerateSymbols>
+ <LLibSym>1</LLibSym>
+ <LLines>1</LLines>
+ <LLocSym>1</LLocSym>
+ <LPubSym>1</LPubSym>
+ <LXref>0</LXref>
+ <LExpSel>0</LExpSel>
+ </OPTXL>
+ <OPTFL>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <IsCurrentTarget>1</IsCurrentTarget>
+ </OPTFL>
+ <CpuCode>255</CpuCode>
+ <Books>
+ <Book>
+ <Number>0</Number>
+ <Title>Data Sheet</Title>
+ <Path>DATASHTS\Luminary\TM4C123GH6PM.PDF</Path>
+ </Book>
+ </Books>
+ <DllOpt>
+ <SimDllName>SARMCM3.DLL</SimDllName>
+ <SimDllArguments>-MPU</SimDllArguments>
+ <SimDlgDllName>DCM.DLL</SimDlgDllName>
+ <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+ <TargetDllName>SARMCM3.DLL</TargetDllName>
+ <TargetDllArguments>-MPU</TargetDllArguments>
+ <TargetDlgDllName>TCM.DLL</TargetDlgDllName>
+ <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+ </DllOpt>
+ <DebugOpt>
+ <uSim>0</uSim>
+ <uTrg>1</uTrg>
+ <sLdApp>1</sLdApp>
+ <sGomain>1</sGomain>
+ <sRbreak>1</sRbreak>
+ <sRwatch>1</sRwatch>
+ <sRmem>1</sRmem>
+ <sRfunc>1</sRfunc>
+ <sRbox>1</sRbox>
+ <tLdApp>1</tLdApp>
+ <tGomain>0</tGomain>
+ <tRbreak>1</tRbreak>
+ <tRwatch>1</tRwatch>
+ <tRmem>1</tRmem>
+ <tRfunc>0</tRfunc>
+ <tRbox>1</tRbox>
+ <sRunDeb>0</sRunDeb>
+ <sLrtime>0</sLrtime>
+ <nTsel>4</nTsel>
+ <sDll></sDll>
+ <sDllPa></sDllPa>
+ <sDlgDll></sDlgDll>
+ <sDlgPa></sDlgPa>
+ <sIfile></sIfile>
+ <tDll></tDll>
+ <tDllPa></tDllPa>
+ <tDlgDll></tDlgDll>
+ <tDlgPa></tDlgPa>
+ <tIfile></tIfile>
+ <pMon>BIN\lmidk-agdi.dll</pMon>
+ </DebugOpt>
+ <TargetDriverDllRegistry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>lmidk-agdi</Key>
+ <Name>-O4614 -S3 -FO29</Name>
+ </SetRegEntry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>DLGTARM</Key>
+ <Name></Name>
+ </SetRegEntry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>ARMDBGFLAGS</Key>
+ <Name></Name>
+ </SetRegEntry>
+ </TargetDriverDllRegistry>
+ <DebugFlag>
+ <trace>0</trace>
+ <periodic>1</periodic>
+ <aLwin>0</aLwin>
+ <aCover>0</aCover>
+ <aSer1>0</aSer1>
+ <aSer2>0</aSer2>
+ <aPa>0</aPa>
+ <viewmode>1</viewmode>
+ <vrSel>0</vrSel>
+ <aSym>0</aSym>
+ <aTbox>0</aTbox>
+ <AscS1>0</AscS1>
+ <AscS2>0</AscS2>
+ <AscS3>0</AscS3>
+ <aSer3>0</aSer3>
+ <eProf>0</eProf>
+ <aLa>0</aLa>
+ <aPa1>0</aPa1>
+ <AscS4>0</AscS4>
+ <aSer4>0</aSer4>
+ <StkLoc>0</StkLoc>
+ <TrcWin>0</TrcWin>
+ <newCpu>0</newCpu>
+ <uProt>0</uProt>
+ </DebugFlag>
+ <LintExecutable></LintExecutable>
+ <LintConfigFile></LintConfigFile>
+ </TargetOption>
+ </Target>
+
+ <Group>
+ <GroupName>Source</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>1</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\blinky.c</PathWithFileName>
+ <FilenameWithoutPath>blinky.c</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>2</FileNumber>
+ <FileType>2</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\startup_rvmdk.S</PathWithFileName>
+ <FilenameWithoutPath>startup_rvmdk.S</FilenameWithoutPath>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>Documentation</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>3</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <Focus>1</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>1</TopLine>
+ <CurrentLine>1</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\readme.txt</PathWithFileName>
+ <FilenameWithoutPath>readme.txt</FilenameWithoutPath>
+ <WindowPosition>
+ <length>44</length>
+ <flags>0</flags>
+ <showCmd>1</showCmd>
+ <MinPosition>
+ <xPos>-1</xPos>
+ <yPos>-1</yPos>
+ </MinPosition>
+ <MaxPosition>
+ <xPos>-1</xPos>
+ <yPos>-1</yPos>
+ </MaxPosition>
+ <NormalPosition>
+ <Top>0</Top>
+ <Left>0</Left>
+ <Right>729</Right>
+ <Bottom>300</Bottom>
+ </NormalPosition>
+ </WindowPosition>
+ </File>
+ </Group>
+
+ <MDIGroups>
+ <Orientation>1</Orientation>
+ <ActiveMDIGroup>0</ActiveMDIGroup>
+ <MDIGroup>
+ <Size>100</Size>
+ <ActiveTab>0</ActiveTab>
+ <Documents>
+ <Doc>
+ <Name>.\readme.txt</Name>
+ <ColumnNumber>0</ColumnNumber>
+ <TopLine>1</TopLine>
+ <CurrentLine>1</CurrentLine>
+ </Doc>
+ </Documents>
+ </MDIGroup>
+ </MDIGroups>
+
+</ProjectOpt>
diff --git a/boards/ek-tm4c123gxl/blinky/blinky.uvproj b/boards/ek-tm4c123gxl/blinky/blinky.uvproj new file mode 100644 index 0000000..954764a --- /dev/null +++ b/boards/ek-tm4c123gxl/blinky/blinky.uvproj @@ -0,0 +1,414 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+ <SchemaVersion>1.1</SchemaVersion>
+
+ <Header>### uVision Project, (C) Keil Software</Header>
+
+ <Targets>
+ <Target>
+ <TargetName>blinky</TargetName>
+ <ToolsetNumber>0x4</ToolsetNumber>
+ <ToolsetName>ARM-ADS</ToolsetName>
+ <TargetOption>
+ <TargetCommonOption>
+ <Device>TM4C123GH6PM</Device>
+ <Vendor>Texas Instruments</Vendor>
+ <Cpu>IRAM(0x20000000-0x20007FFF) IROM(0-0x3FFFF) CLOCK(8000000) CPUTYPE("Cortex-M4") FPU2</Cpu>
+ <FlashUtilSpec></FlashUtilSpec>
+ <StartupFile>"STARTUP\Luminary\Startup.s" ("Luminary Startup Code")</StartupFile>
+ <FlashDriverDll>UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0LM4F_256 -FS00 -FL040000)</FlashDriverDll>
+ <DeviceId>5919</DeviceId>
+ <RegisterFile>LM4Fxxxx.H</RegisterFile>
+ <MemoryEnv></MemoryEnv>
+ <Cmp></Cmp>
+ <Asm></Asm>
+ <Linker></Linker>
+ <OHString></OHString>
+ <InfinionOptionDll></InfinionOptionDll>
+ <SLE66CMisc></SLE66CMisc>
+ <SLE66AMisc></SLE66AMisc>
+ <SLE66LinkerMisc></SLE66LinkerMisc>
+ <UseEnv>0</UseEnv>
+ <BinPath></BinPath>
+ <IncludePath></IncludePath>
+ <LibPath></LibPath>
+ <RegisterFilePath>Luminary\</RegisterFilePath>
+ <DBRegisterFilePath>Luminary\</DBRegisterFilePath>
+ <TargetStatus>
+ <Error>0</Error>
+ <ExitCodeStop>0</ExitCodeStop>
+ <ButtonStop>0</ButtonStop>
+ <NotGenerated>0</NotGenerated>
+ <InvalidFlash>1</InvalidFlash>
+ </TargetStatus>
+ <OutputDirectory>.\rvmdk\</OutputDirectory>
+ <OutputName>blinky</OutputName>
+ <CreateExecutable>1</CreateExecutable>
+ <CreateLib>0</CreateLib>
+ <CreateHexFile>0</CreateHexFile>
+ <DebugInformation>1</DebugInformation>
+ <BrowseInformation>1</BrowseInformation>
+ <ListingPath>.\rvmdk\</ListingPath>
+ <HexFormatSelection>1</HexFormatSelection>
+ <Merge32K>0</Merge32K>
+ <CreateBatchFile>0</CreateBatchFile>
+ <BeforeCompile>
+ <RunUserProg1>0</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name></UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </BeforeCompile>
+ <BeforeMake>
+ <RunUserProg1>0</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name></UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </BeforeMake>
+ <AfterMake>
+ <RunUserProg1>1</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name>fromelf --bin --output .\rvmdk\blinky.bin .\rvmdk\blinky.axf</UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </AfterMake>
+ <SelectedForBatchBuild>0</SelectedForBatchBuild>
+ <SVCSIdString></SVCSIdString>
+ </TargetCommonOption>
+ <CommonProperty>
+ <UseCPPCompiler>0</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <DllOption>
+ <SimDllName>SARMCM3.DLL</SimDllName>
+ <SimDllArguments>-MPU</SimDllArguments>
+ <SimDlgDll>DCM.DLL</SimDlgDll>
+ <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+ <TargetDllName>SARMCM3.DLL</TargetDllName>
+ <TargetDllArguments>-MPU</TargetDllArguments>
+ <TargetDlgDll>TCM.DLL</TargetDlgDll>
+ <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+ </DllOption>
+ <DebugOption>
+ <OPTHX>
+ <HexSelection>1</HexSelection>
+ <HexRangeLowAddress>0</HexRangeLowAddress>
+ <HexRangeHighAddress>0</HexRangeHighAddress>
+ <HexOffset>0</HexOffset>
+ <Oh166RecLen>16</Oh166RecLen>
+ </OPTHX>
+ <Simulator>
+ <UseSimulator>0</UseSimulator>
+ <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+ <RunToMain>1</RunToMain>
+ <RestoreBreakpoints>1</RestoreBreakpoints>
+ <RestoreWatchpoints>1</RestoreWatchpoints>
+ <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+ <RestoreFunctions>1</RestoreFunctions>
+ <RestoreToolbox>1</RestoreToolbox>
+ <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+ </Simulator>
+ <Target>
+ <UseTarget>1</UseTarget>
+ <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+ <RunToMain>0</RunToMain>
+ <RestoreBreakpoints>1</RestoreBreakpoints>
+ <RestoreWatchpoints>1</RestoreWatchpoints>
+ <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+ <RestoreFunctions>0</RestoreFunctions>
+ <RestoreToolbox>1</RestoreToolbox>
+ </Target>
+ <RunDebugAfterBuild>0</RunDebugAfterBuild>
+ <TargetSelection>4</TargetSelection>
+ <SimDlls>
+ <CpuDll></CpuDll>
+ <CpuDllArguments></CpuDllArguments>
+ <PeripheralDll></PeripheralDll>
+ <PeripheralDllArguments></PeripheralDllArguments>
+ <InitializationFile></InitializationFile>
+ </SimDlls>
+ <TargetDlls>
+ <CpuDll></CpuDll>
+ <CpuDllArguments></CpuDllArguments>
+ <PeripheralDll></PeripheralDll>
+ <PeripheralDllArguments></PeripheralDllArguments>
+ <InitializationFile></InitializationFile>
+ <Driver>BIN\lmidk-agdi.dll</Driver>
+ </TargetDlls>
+ </DebugOption>
+ <Utilities>
+ <Flash1>
+ <UseTargetDll>1</UseTargetDll>
+ <UseExternalTool>0</UseExternalTool>
+ <RunIndependent>0</RunIndependent>
+ <UpdateFlashBeforeDebugging>0</UpdateFlashBeforeDebugging>
+ <Capability>1</Capability>
+ <DriverSelection>4099</DriverSelection>
+ </Flash1>
+ <Flash2>BIN\lmidk-agdi.dll</Flash2>
+ <Flash3></Flash3>
+ <Flash4></Flash4>
+ </Utilities>
+ <TargetArmAds>
+ <ArmAdsMisc>
+ <GenerateListings>0</GenerateListings>
+ <asHll>1</asHll>
+ <asAsm>1</asAsm>
+ <asMacX>1</asMacX>
+ <asSyms>1</asSyms>
+ <asFals>1</asFals>
+ <asDbgD>1</asDbgD>
+ <asForm>1</asForm>
+ <ldLst>0</ldLst>
+ <ldmm>1</ldmm>
+ <ldXref>1</ldXref>
+ <BigEnd>0</BigEnd>
+ <AdsALst>0</AdsALst>
+ <AdsACrf>0</AdsACrf>
+ <AdsANop>0</AdsANop>
+ <AdsANot>0</AdsANot>
+ <AdsLLst>1</AdsLLst>
+ <AdsLmap>1</AdsLmap>
+ <AdsLcgr>1</AdsLcgr>
+ <AdsLsym>1</AdsLsym>
+ <AdsLszi>1</AdsLszi>
+ <AdsLtoi>1</AdsLtoi>
+ <AdsLsun>1</AdsLsun>
+ <AdsLven>1</AdsLven>
+ <AdsLsxf>1</AdsLsxf>
+ <RvctClst>0</RvctClst>
+ <GenPPlst>0</GenPPlst>
+ <AdsCpuType>"Cortex-M4"</AdsCpuType>
+ <RvctDeviceName></RvctDeviceName>
+ <mOS>0</mOS>
+ <uocRom>0</uocRom>
+ <uocRam>0</uocRam>
+ <hadIROM>1</hadIROM>
+ <hadIRAM>1</hadIRAM>
+ <hadXRAM>0</hadXRAM>
+ <uocXRam>0</uocXRam>
+ <RvdsVP>2</RvdsVP>
+ <hadIRAM2>0</hadIRAM2>
+ <hadIROM2>0</hadIROM2>
+ <StupSel>8</StupSel>
+ <useUlib>1</useUlib>
+ <EndSel>0</EndSel>
+ <uLtcg>0</uLtcg>
+ <RoSelD>3</RoSelD>
+ <RwSelD>3</RwSelD>
+ <CodeSel>0</CodeSel>
+ <OptFeed>0</OptFeed>
+ <NoZi1>0</NoZi1>
+ <NoZi2>0</NoZi2>
+ <NoZi3>0</NoZi3>
+ <NoZi4>0</NoZi4>
+ <NoZi5>0</NoZi5>
+ <Ro1Chk>0</Ro1Chk>
+ <Ro2Chk>0</Ro2Chk>
+ <Ro3Chk>0</Ro3Chk>
+ <Ir1Chk>1</Ir1Chk>
+ <Ir2Chk>0</Ir2Chk>
+ <Ra1Chk>0</Ra1Chk>
+ <Ra2Chk>0</Ra2Chk>
+ <Ra3Chk>0</Ra3Chk>
+ <Im1Chk>1</Im1Chk>
+ <Im2Chk>0</Im2Chk>
+ <OnChipMemories>
+ <Ocm1>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm1>
+ <Ocm2>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm2>
+ <Ocm3>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm3>
+ <Ocm4>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm4>
+ <Ocm5>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm5>
+ <Ocm6>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm6>
+ <IRAM>
+ <Type>0</Type>
+ <StartAddress>0x20000000</StartAddress>
+ <Size>0x8000</Size>
+ </IRAM>
+ <IROM>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x40000</Size>
+ </IROM>
+ <XRAM>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </XRAM>
+ <OCR_RVCT1>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT1>
+ <OCR_RVCT2>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT2>
+ <OCR_RVCT3>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT3>
+ <OCR_RVCT4>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x40000</Size>
+ </OCR_RVCT4>
+ <OCR_RVCT5>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT5>
+ <OCR_RVCT6>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT6>
+ <OCR_RVCT7>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT7>
+ <OCR_RVCT8>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT8>
+ <OCR_RVCT9>
+ <Type>0</Type>
+ <StartAddress>0x20000000</StartAddress>
+ <Size>0x8000</Size>
+ </OCR_RVCT9>
+ <OCR_RVCT10>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT10>
+ </OnChipMemories>
+ <RvctStartVector></RvctStartVector>
+ </ArmAdsMisc>
+ <Cads>
+ <interw>0</interw>
+ <Optim>3</Optim>
+ <oTime>0</oTime>
+ <SplitLS>0</SplitLS>
+ <OneElfS>1</OneElfS>
+ <Strict>0</Strict>
+ <EnumInt>0</EnumInt>
+ <PlainCh>0</PlainCh>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <wLevel>2</wLevel>
+ <uThumb>0</uThumb>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define>rvmdk PART_TM4C123GH6PM</Define>
+ <Undefine></Undefine>
+ <IncludePath>..\..\..\..;</IncludePath>
+ </VariousControls>
+ </Cads>
+ <Aads>
+ <interw>1</interw>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <thumb>0</thumb>
+ <SplitLS>0</SplitLS>
+ <SwStkChk>0</SwStkChk>
+ <NoWarn>0</NoWarn>
+ <VariousControls>
+ <MiscControls></MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Aads>
+ <LDads>
+ <umfTarg>0</umfTarg>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <noStLib>0</noStLib>
+ <RepFail>1</RepFail>
+ <useFile>0</useFile>
+ <TextAddressRange>0x00000000</TextAddressRange>
+ <DataAddressRange>0x20000000</DataAddressRange>
+ <ScatterFile>blinky.sct</ScatterFile>
+ <IncludeLibs></IncludeLibs>
+ <IncludeLibsPath></IncludeLibsPath>
+ <Misc>--entry Reset_Handler</Misc>
+ <LinkerInputFile></LinkerInputFile>
+ <DisabledWarnings></DisabledWarnings>
+ </LDads>
+ </TargetArmAds>
+ </TargetOption>
+ <Groups>
+ <Group>
+ <GroupName>Source</GroupName>
+ <Files>
+ <File>
+ <FileName>blinky.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>.\blinky.c</FilePath>
+ </File>
+ <File>
+ <FileName>startup_rvmdk.S</FileName>
+ <FileType>2</FileType>
+ <FilePath>.\startup_rvmdk.S</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>Documentation</GroupName>
+ <Files>
+ <File>
+ <FileName>readme.txt</FileName>
+ <FileType>5</FileType>
+ <FilePath>.\readme.txt</FilePath>
+ </File>
+ </Files>
+ </Group>
+ </Groups>
+ </Target>
+ </Targets>
+
+</Project>
diff --git a/boards/ek-tm4c123gxl/blinky/blinky_ccs.cmd b/boards/ek-tm4c123gxl/blinky/blinky_ccs.cmd new file mode 100644 index 0000000..39c77aa --- /dev/null +++ b/boards/ek-tm4c123gxl/blinky/blinky_ccs.cmd @@ -0,0 +1,70 @@ +/******************************************************************************
+ *
+ * blinky_ccs.cmd - CCS linker configuration file for blinky.
+ *
+ * Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+ * Software License Agreement
+ *
+ * Texas Instruments (TI) is supplying this software for use solely and
+ * exclusively on TI's microcontroller products. The software is owned by
+ * TI and/or its suppliers, and is protected under applicable copyright
+ * laws. You may not combine this software with "viral" open-source
+ * software in order to form a larger program.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+ * NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+ * NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+ * CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+ * DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ * This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+ *
+ *****************************************************************************/
+
+--retain=g_pfnVectors
+
+/* The following command line options are set as part of the CCS project. */
+/* If you are building using the command line, or for some reason want to */
+/* define them here, you can uncomment and modify these lines as needed. */
+/* If you are using CCS for building, it is probably better to make any such */
+/* modifications in your CCS project and leave this file alone. */
+/* */
+/* --heap_size=0 */
+/* --stack_size=256 */
+/* --library=rtsv7M3_T_le_eabi.lib */
+
+/* The starting address of the application. Normally the interrupt vectors */
+/* must be located at the beginning of the application. */
+#define APP_BASE 0x00000000
+#define RAM_BASE 0x20000000
+
+/* System memory map */
+
+MEMORY
+{
+ /* Application stored in and executes from internal flash */
+ FLASH (RX) : origin = APP_BASE, length = 0x00040000
+ /* Application uses internal RAM for data */
+ SRAM (RWX) : origin = 0x20000000, length = 0x00008000
+}
+
+/* Section allocation in memory */
+
+SECTIONS
+{
+ .intvecs: > APP_BASE
+ .text : > FLASH
+ .const : > FLASH
+ .cinit : > FLASH
+ .pinit : > FLASH
+ .init_array : > FLASH
+
+ .vtable : > RAM_BASE
+ .data : > SRAM
+ .bss : > SRAM
+ .sysmem : > SRAM
+ .stack : > SRAM
+}
+
+__STACK_TOP = __stack + 256;
diff --git a/boards/ek-tm4c123gxl/blinky/ccs/.ccsimportspec b/boards/ek-tm4c123gxl/blinky/ccs/.ccsimportspec new file mode 100644 index 0000000..60cba3f --- /dev/null +++ b/boards/ek-tm4c123gxl/blinky/ccs/.ccsimportspec @@ -0,0 +1,8 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<importSpec>
+ <source root="..">
+ <file name="blinky.c"/>
+ <file regex=".*_ccs\.cmd"/>
+ <file name="startup_ccs.c"/>
+ </source>
+</importSpec>
diff --git a/boards/ek-tm4c123gxl/blinky/ccs/.ccsproject b/boards/ek-tm4c123gxl/blinky/ccs/.ccsproject new file mode 100644 index 0000000..75fb50e --- /dev/null +++ b/boards/ek-tm4c123gxl/blinky/ccs/.ccsproject @@ -0,0 +1,10 @@ +<?xml version="1.0" encoding="UTF-8" ?>
+<?ccsproject version="1.0"?>
+<projectOptions>
+ <deviceVariant value="Cortex M.TM4C123GH6PM"/>
+ <deviceFamily value="TMS470"/>
+ <deviceEndianness value="little"/>
+ <codegenToolVersion value="5.0.4"/>
+ <isElfFormat value="true"/>
+ <rts value="libc.a"/>
+</projectOptions>
diff --git a/boards/ek-tm4c123gxl/blinky/ccs/.cproject b/boards/ek-tm4c123gxl/blinky/ccs/.cproject new file mode 100644 index 0000000..08a0d0c --- /dev/null +++ b/boards/ek-tm4c123gxl/blinky/ccs/.cproject @@ -0,0 +1,183 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+ <storageModule configRelations="2" moduleId="org.eclipse.cdt.core.settings">
+ <cconfiguration id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.279087068">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.279087068" moduleId="org.eclipse.cdt.core.settings" name="Debug">
+ <macros>
+ <stringMacro name="SW_ROOT" type="VALUE_PATH_DIR" value="${PROJECT_ROOT}/../../../../.."/>
+ </macros>
+ <externalSettings/>
+ <extensions>
+ <extension id="com.ti.ccstudio.binaryparser.CoffParser" point="org.eclipse.cdt.core.BinaryParser"/>
+ <extension id="com.ti.ccstudio.errorparser.CoffErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.LinkErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.AsmErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactExtension="out" artifactName="${ProjName}" buildProperties="" cleanCommand="${CG_CLEAN_CMD}" description="" id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.279087068" name="Debug" parent="com.ti.ccstudio.buildDefinitions.TMS470.Debug" postbuildStep=""${CCE_INSTALL_ROOT}/utils/tiobj2bin/tiobj2bin" "${BuildArtifactFileName}" "${BuildArtifactFileBaseName}.bin" "${CG_TOOL_ROOT}/bin/armofd" "${CG_TOOL_ROOT}/bin/armhex" "${CCE_INSTALL_ROOT}/utils/tiobj2bin/mkhex4bin"">
+ <folderInfo id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.279087068." name="/" resourcePath="">
+ <toolChain id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.DebugToolchain.921136129" name="TI Build Tools" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.DebugToolchain" targetTool="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug.850065009">
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS.2069246477" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS" valueType="stringList">
+ <listOptionValue builtIn="false" value="DEVICE_CONFIGURATION_ID=Cortex M.TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="DEVICE_ENDIANNESS=little"/>
+ <listOptionValue builtIn="false" value="OUTPUT_FORMAT=ELF"/>
+ <listOptionValue builtIn="false" value="CCS_MBS_VERSION=5.1.0.01"/>
+ <listOptionValue builtIn="false" value="RUNTIME_SUPPORT_LIBRARY=libc.a"/>
+ <listOptionValue builtIn="false" value="OUTPUT_TYPE=executable"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION.1084494324" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION" value="5.0.4" valueType="string"/>
+ <targetPlatform id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformDebug.414885875" name="Platform" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformDebug"/>
+ <builder buildPath="${BuildDirectory}" id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderDebug.764507952" name="GNU Make.Debug" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderDebug"/>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerDebug.642004852" name="ARM Compiler" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerDebug">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.705974113" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.7M4" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.516725861" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.1770761275" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.eabi" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.276111720" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.FPv4SPD16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL.988750600" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL.SYMDEBUG__DWARF" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING.1969434358" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING" valueType="stringList">
+ <listOptionValue builtIn="false" value="225"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER.135799812" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.754509336" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH.1363900993" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH" valueType="includePath">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN.752418165" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.1410810714" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.on" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL.1175471735" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL.2" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC.1049620971" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL.885882524" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE.1913033806" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE" valueType="definedSymbols">
+ <listOptionValue builtIn="false" value="ccs="ccs""/>
+ <listOptionValue builtIn="false" value="PART_TM4C123GH6PM"/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS.1267889065" name="C Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS.1062809644" name="C++ Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS.1526069525" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS.1774652292" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS"/>
+ </tool>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug.850065009" name="ARM Linker" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE.543004545" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE" value=""blinky_ccs.map"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE.1174873371" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE" value="256" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE.1425681686" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE" value="0" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE.280269742" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE" value=""${ProjName}.out"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO.1484363173" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO" value=""${ProjName}_linkInfo.xml"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER.734767106" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.1665745626" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH.1576611930" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH" valueType="libPaths">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/lib""/>
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY.292546592" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY" valueType="libs">
+ <listOptionValue builtIn="false" value=""libc.a""/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS.1455612208" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS.641235073" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS.1601153582" name="Generated Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS"/>
+ </tool>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ <cconfiguration id="com.ti.ccstudio.buildDefinitions.TMS470.Release.1732244605">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.ti.ccstudio.buildDefinitions.TMS470.Release.1732244605" moduleId="org.eclipse.cdt.core.settings" name="Release">
+ <macros>
+ <stringMacro name="SW_ROOT" type="VALUE_PATH_DIR" value="${PROJECT_ROOT}/../../../../.."/>
+ </macros>
+ <externalSettings/>
+ <extensions>
+ <extension id="com.ti.ccstudio.binaryparser.CoffParser" point="org.eclipse.cdt.core.BinaryParser"/>
+ <extension id="com.ti.ccstudio.errorparser.CoffErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.LinkErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.AsmErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactExtension="out" artifactName="${ProjName}" buildProperties="" cleanCommand="${CG_CLEAN_CMD}" description="" id="com.ti.ccstudio.buildDefinitions.TMS470.Release.1732244605" name="Release" parent="com.ti.ccstudio.buildDefinitions.TMS470.Release" postbuildStep=""${CCE_INSTALL_ROOT}/utils/tiobj2bin/tiobj2bin" "${BuildArtifactFileName}" "${BuildArtifactFileBaseName}.bin" "${CG_TOOL_ROOT}/bin/armofd" "${CG_TOOL_ROOT}/bin/armhex" "${CCE_INSTALL_ROOT}/utils/tiobj2bin/mkhex4bin"">
+ <folderInfo id="com.ti.ccstudio.buildDefinitions.TMS470.Release.1732244605." name="/" resourcePath="">
+ <toolChain id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.ReleaseToolchain.874529917" name="TI Build Tools" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.ReleaseToolchain" targetTool="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease.2057200444">
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS.943393775" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS" valueType="stringList">
+ <listOptionValue builtIn="false" value="DEVICE_CONFIGURATION_ID=Cortex M.TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="DEVICE_ENDIANNESS=little"/>
+ <listOptionValue builtIn="false" value="OUTPUT_FORMAT=ELF"/>
+ <listOptionValue builtIn="false" value="CCS_MBS_VERSION=5.1.0.01"/>
+ <listOptionValue builtIn="false" value="RUNTIME_SUPPORT_LIBRARY=libc.a"/>
+ <listOptionValue builtIn="false" value="OUTPUT_TYPE=executable"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION.1599680994" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION" value="5.0.4" valueType="string"/>
+ <targetPlatform id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformRelease.2107442977" name="Platform" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformRelease"/>
+ <builder buildPath="${BuildDirectory}" id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderRelease.1777034550" name="GNU Make.Release" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderRelease"/>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerRelease.1798694559" name="ARM Compiler" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerRelease">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.313304036" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.7M4" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.384705556" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.2057901624" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.eabi" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.2133430869" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.FPv4SPD16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING.993535525" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING" valueType="stringList">
+ <listOptionValue builtIn="false" value="225"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER.628438377" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.18473504" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH.1137893696" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH" valueType="includePath">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN.1297124821" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.2042649093" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.on" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC.1661868302" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL.1347229055" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE.915560184" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE" valueType="definedSymbols">
+ <listOptionValue builtIn="false" value="ccs="ccs""/>
+ <listOptionValue builtIn="false" value="PART_TM4C123GH6PM"/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS.422109807" name="C Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS.1218684328" name="C++ Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS.1370196457" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS.1187471686" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS"/>
+ </tool>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease.2057200444" name="ARM Linker" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE.1375730025" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE" value=""blinky_ccs.map"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE.1720972790" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE" value="256" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE.2981387" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE" value="0" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE.302243689" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE" value=""${ProjName}.out"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO.1343274581" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO" value=""${ProjName}_linkInfo.xml"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER.461575365" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.448516329" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH.1200539606" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH" valueType="libPaths">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/lib""/>
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY.1505318680" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY" valueType="libs">
+ <listOptionValue builtIn="false" value=""libc.a""/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS.343529194" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS.519083688" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS.1949740014" name="Generated Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS"/>
+ </tool>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <project id="blinky.com.ti.ccstudio.buildDefinitions.TMS470.ProjectType.1882932781" name="ARM" projectType="com.ti.ccstudio.buildDefinitions.TMS470.ProjectType"/>
+ </storageModule>
+ <storageModule moduleId="scannerConfiguration"/>
+ <storageModule moduleId="org.eclipse.cdt.core.language.mapping">
+ <project-mappings>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.asmSource" language="com.ti.ccstudio.core.TIASMLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cHeader" language="com.ti.ccstudio.core.TIGCCLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cSource" language="com.ti.ccstudio.core.TIGCCLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cxxHeader" language="com.ti.ccstudio.core.TIGPPLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cxxSource" language="com.ti.ccstudio.core.TIGPPLanguage"/>
+ </project-mappings>
+ </storageModule>
+</cproject>
diff --git a/boards/ek-tm4c123gxl/blinky/ccs/.project b/boards/ek-tm4c123gxl/blinky/ccs/.project new file mode 100644 index 0000000..842c8b3 --- /dev/null +++ b/boards/ek-tm4c123gxl/blinky/ccs/.project @@ -0,0 +1,50 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+ <name>blinky</name>
+ <comment></comment>
+ <projects>
+ </projects>
+ <buildSpec>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+ <triggers>full,incremental,</triggers>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ </buildSpec>
+ <natures>
+ <nature>com.ti.ccstudio.core.ccsNature</nature>
+ <nature>org.eclipse.cdt.core.cnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+ <nature>org.eclipse.cdt.core.ccnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+ </natures>
+ <linkedResources>
+ <link>
+ <name>blinky.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/blinky/blinky.c</locationURI>
+ </link>
+ <link>
+ <name>blinky_ccs.cmd</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/blinky/blinky_ccs.cmd</locationURI>
+ </link>
+ <link>
+ <name>startup_ccs.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/blinky/startup_ccs.c</locationURI>
+ </link>
+ </linkedResources>
+ <variableList>
+ <variable>
+ <name>SW_ROOT</name>
+ <value>$%7BPARENT-5-PROJECT_LOC%7D</value>
+ </variable>
+ </variableList>
+</projectDescription>
diff --git a/boards/ek-tm4c123gxl/blinky/ccs/.settings/org.eclipse.cdt.codan.core.prefs b/boards/ek-tm4c123gxl/blinky/ccs/.settings/org.eclipse.cdt.codan.core.prefs new file mode 100644 index 0000000..98b6350 --- /dev/null +++ b/boards/ek-tm4c123gxl/blinky/ccs/.settings/org.eclipse.cdt.codan.core.prefs @@ -0,0 +1,3 @@ +eclipse.preferences.version=1
+inEditor=false
+onBuild=false
diff --git a/boards/ek-tm4c123gxl/blinky/ccs/Debug/blinky.bin b/boards/ek-tm4c123gxl/blinky/ccs/Debug/blinky.bin Binary files differnew file mode 100644 index 0000000..50bcc47 --- /dev/null +++ b/boards/ek-tm4c123gxl/blinky/ccs/Debug/blinky.bin diff --git a/boards/ek-tm4c123gxl/blinky/ccs/Debug/blinky.out b/boards/ek-tm4c123gxl/blinky/ccs/Debug/blinky.out Binary files differnew file mode 100644 index 0000000..4a60213 --- /dev/null +++ b/boards/ek-tm4c123gxl/blinky/ccs/Debug/blinky.out diff --git a/boards/ek-tm4c123gxl/blinky/ccs/macros.ini_initial b/boards/ek-tm4c123gxl/blinky/ccs/macros.ini_initial new file mode 100644 index 0000000..31214b5 --- /dev/null +++ b/boards/ek-tm4c123gxl/blinky/ccs/macros.ini_initial @@ -0,0 +1 @@ +SW_ROOT = ../../../../..
diff --git a/boards/ek-tm4c123gxl/blinky/ccs/target_config.ccxml b/boards/ek-tm4c123gxl/blinky/ccs/target_config.ccxml new file mode 100644 index 0000000..be4342a --- /dev/null +++ b/boards/ek-tm4c123gxl/blinky/ccs/target_config.ccxml @@ -0,0 +1,13 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<configurations XML_version="1.2" id="configurations_0">
+ <configuration XML_version="1.2" id="Stellaris In-Circuit Debug Interface_0">
+ <instance XML_version="1.2" desc="Stellaris In-Circuit Debug Interface_0" href="connections/Stellaris_ICDI_Connection.xml" id="Stellaris In-Circuit Debug Interface_0" xml="Stellaris_ICDI_Connection.xml" xmlpath="connections"/>
+ <connection XML_version="1.2" id="Stellaris In-Circuit Debug Interface_0">
+ <instance XML_version="1.2" href="drivers/stellaris_cs_dap.xml" id="drivers" xml="stellaris_cs_dap.xml" xmlpath="drivers"/>
+ <instance XML_version="1.2" href="drivers/stellaris_cortex_m4.xml" id="drivers" xml="stellaris_cortex_m4.xml" xmlpath="drivers"/>
+ <platform XML_version="1.2" id="platform_0">
+ <instance XML_version="1.2" desc="Stellaris TM4C123GH6PM_0" href="devices/tm4c123gh6pm.xml" id="Stellaris TM4C123GH6PM_0" xml="tm4c123gh6pm.xml" xmlpath="devices"/>
+ </platform>
+ </connection>
+ </configuration>
+</configurations>
diff --git a/boards/ek-tm4c123gxl/blinky/ewarm/Exe/blinky.bin b/boards/ek-tm4c123gxl/blinky/ewarm/Exe/blinky.bin Binary files differnew file mode 100644 index 0000000..4161ba8 --- /dev/null +++ b/boards/ek-tm4c123gxl/blinky/ewarm/Exe/blinky.bin diff --git a/boards/ek-tm4c123gxl/blinky/ewarm/Exe/blinky.out b/boards/ek-tm4c123gxl/blinky/ewarm/Exe/blinky.out Binary files differnew file mode 100644 index 0000000..61a4672 --- /dev/null +++ b/boards/ek-tm4c123gxl/blinky/ewarm/Exe/blinky.out diff --git a/boards/ek-tm4c123gxl/blinky/gcc/blinky.axf b/boards/ek-tm4c123gxl/blinky/gcc/blinky.axf Binary files differnew file mode 100644 index 0000000..8c5fd7f --- /dev/null +++ b/boards/ek-tm4c123gxl/blinky/gcc/blinky.axf diff --git a/boards/ek-tm4c123gxl/blinky/gcc/blinky.bin b/boards/ek-tm4c123gxl/blinky/gcc/blinky.bin Binary files differnew file mode 100644 index 0000000..9716b0c --- /dev/null +++ b/boards/ek-tm4c123gxl/blinky/gcc/blinky.bin diff --git a/boards/ek-tm4c123gxl/blinky/readme.txt b/boards/ek-tm4c123gxl/blinky/readme.txt new file mode 100644 index 0000000..2a1436b --- /dev/null +++ b/boards/ek-tm4c123gxl/blinky/readme.txt @@ -0,0 +1,24 @@ +Blinky
+
+A very simple example that blinks the on-board LED using direct register
+access.
+
+-------------------------------------------------------------------------------
+
+Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+Software License Agreement
+
+Texas Instruments (TI) is supplying this software for use solely and
+exclusively on TI's microcontroller products. The software is owned by
+TI and/or its suppliers, and is protected under applicable copyright
+laws. You may not combine this software with "viral" open-source
+software in order to form a larger program.
+
+THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+DAMAGES, FOR ANY REASON WHATSOEVER.
+
+This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
diff --git a/boards/ek-tm4c123gxl/blinky/rvmdk/blinky.axf b/boards/ek-tm4c123gxl/blinky/rvmdk/blinky.axf Binary files differnew file mode 100644 index 0000000..cc6ad3a --- /dev/null +++ b/boards/ek-tm4c123gxl/blinky/rvmdk/blinky.axf diff --git a/boards/ek-tm4c123gxl/blinky/rvmdk/blinky.bin b/boards/ek-tm4c123gxl/blinky/rvmdk/blinky.bin Binary files differnew file mode 100644 index 0000000..1c231be --- /dev/null +++ b/boards/ek-tm4c123gxl/blinky/rvmdk/blinky.bin diff --git a/boards/ek-tm4c123gxl/blinky/startup_ccs.c b/boards/ek-tm4c123gxl/blinky/startup_ccs.c new file mode 100644 index 0000000..ca18035 --- /dev/null +++ b/boards/ek-tm4c123gxl/blinky/startup_ccs.c @@ -0,0 +1,295 @@ +//*****************************************************************************
+//
+// startup_ccs.c - Startup code for use with TI's Code Composer Studio.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// External declaration for the reset handler that is to be called when the
+// processor is started
+//
+//*****************************************************************************
+extern void _c_int00(void);
+
+//*****************************************************************************
+//
+// Linker variable that marks the top of the stack.
+//
+//*****************************************************************************
+extern uint32_t __STACK_TOP;
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000 or at the start of
+// the program if located at a start address other than 0.
+//
+//*****************************************************************************
+#pragma DATA_SECTION(g_pfnVectors, ".intvecs")
+void (* const g_pfnVectors[])(void) =
+{
+ (void (*)(void))((uint32_t)&__STACK_TOP),
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ IntDefaultHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ IntDefaultHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ IntDefaultHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ //
+ // Jump to the CCS C initialization routine. This will enable the
+ // floating-point unit as well, so that does not need to be done here.
+ //
+ __asm(" .global _c_int00\n"
+ " b.w _c_int00");
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/blinky/startup_ewarm.c b/boards/ek-tm4c123gxl/blinky/startup_ewarm.c new file mode 100644 index 0000000..ed44e2d --- /dev/null +++ b/boards/ek-tm4c123gxl/blinky/startup_ewarm.c @@ -0,0 +1,326 @@ +//*****************************************************************************
+//
+// startup_ewarm.c - Startup code for use with IAR's Embedded Workbench,
+// version 5.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Enable the IAR extensions for this source file.
+//
+//*****************************************************************************
+#pragma language=extended
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// The entry point for the application startup code.
+//
+//*****************************************************************************
+extern void __iar_program_start(void);
+
+//*****************************************************************************
+//
+// Reserve space for the system stack.
+//
+//*****************************************************************************
+static uint32_t pui32Stack[64] @ ".noinit";
+
+//*****************************************************************************
+//
+// A union that describes the entries of the vector table. The union is needed
+// since the first entry is the stack pointer and the remainder are function
+// pointers.
+//
+//*****************************************************************************
+typedef union
+{
+ void (*pfnHandler)(void);
+ uint32_t ui32Ptr;
+}
+uVectorEntry;
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000.
+//
+//*****************************************************************************
+__root const uVectorEntry __vector_table[] @ ".intvec" =
+{
+ { .ui32Ptr = (uint32_t)pui32Stack + sizeof(pui32Stack) },
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ IntDefaultHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ IntDefaultHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ IntDefaultHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ //
+ // Enable the floating-point unit. This must be done here to handle the
+ // case where main() uses floating-point and the function prologue saves
+ // floating-point registers (which will fault if floating-point is not
+ // enabled). Any configuration of the floating-point unit using DriverLib
+ // APIs must be done here prior to the floating-point unit being enabled.
+ //
+ // Note that this does not use DriverLib since it might not be included in
+ // this project.
+ //
+ HWREG(NVIC_CPAC) = ((HWREG(NVIC_CPAC) &
+ ~(NVIC_CPAC_CP10_M | NVIC_CPAC_CP11_M)) |
+ NVIC_CPAC_CP10_FULL | NVIC_CPAC_CP11_FULL);
+
+ //
+ // Call the application's entry point.
+ //
+ __iar_program_start();
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/blinky/startup_gcc.c b/boards/ek-tm4c123gxl/blinky/startup_gcc.c new file mode 100644 index 0000000..c20136c --- /dev/null +++ b/boards/ek-tm4c123gxl/blinky/startup_gcc.c @@ -0,0 +1,342 @@ +//*****************************************************************************
+//
+// startup_gcc.c - Startup code for use with GNU tools.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// The entry point for the application.
+//
+//*****************************************************************************
+extern int main(void);
+
+//*****************************************************************************
+//
+// Reserve space for the system stack.
+//
+//*****************************************************************************
+static uint32_t pui32Stack[64];
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000.
+//
+//*****************************************************************************
+__attribute__ ((section(".isr_vector")))
+void (* const g_pfnVectors[])(void) =
+{
+ (void (*)(void))((uint32_t)pui32Stack + sizeof(pui32Stack)),
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ IntDefaultHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ IntDefaultHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ IntDefaultHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// The following are constructs created by the linker, indicating where the
+// the "data" and "bss" segments reside in memory. The initializers for the
+// for the "data" segment resides immediately following the "text" segment.
+//
+//*****************************************************************************
+extern uint32_t _etext;
+extern uint32_t _data;
+extern uint32_t _edata;
+extern uint32_t _bss;
+extern uint32_t _ebss;
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ uint32_t *pui32Src, *pui32Dest;
+
+ //
+ // Copy the data segment initializers from flash to SRAM.
+ //
+ pui32Src = &_etext;
+ for(pui32Dest = &_data; pui32Dest < &_edata; )
+ {
+ *pui32Dest++ = *pui32Src++;
+ }
+
+ //
+ // Zero fill the bss segment.
+ //
+ __asm(" ldr r0, =_bss\n"
+ " ldr r1, =_ebss\n"
+ " mov r2, #0\n"
+ " .thumb_func\n"
+ "zero_loop:\n"
+ " cmp r0, r1\n"
+ " it lt\n"
+ " strlt r2, [r0], #4\n"
+ " blt zero_loop");
+
+ //
+ // Enable the floating-point unit. This must be done here to handle the
+ // case where main() uses floating-point and the function prologue saves
+ // floating-point registers (which will fault if floating-point is not
+ // enabled). Any configuration of the floating-point unit using DriverLib
+ // APIs must be done here prior to the floating-point unit being enabled.
+ //
+ // Note that this does not use DriverLib since it might not be included in
+ // this project.
+ //
+ HWREG(NVIC_CPAC) = ((HWREG(NVIC_CPAC) &
+ ~(NVIC_CPAC_CP10_M | NVIC_CPAC_CP11_M)) |
+ NVIC_CPAC_CP10_FULL | NVIC_CPAC_CP11_FULL);
+
+ //
+ // Call the application's entry point.
+ //
+ main();
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/blinky/startup_rvmdk.S b/boards/ek-tm4c123gxl/blinky/startup_rvmdk.S new file mode 100644 index 0000000..c688cea --- /dev/null +++ b/boards/ek-tm4c123gxl/blinky/startup_rvmdk.S @@ -0,0 +1,351 @@ +; <<< Use Configuration Wizard in Context Menu >>>
+;******************************************************************************
+;
+; startup_rvmdk.S - Startup code for use with Keil's uVision.
+;
+; Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+; Software License Agreement
+;
+; Texas Instruments (TI) is supplying this software for use solely and
+; exclusively on TI's microcontroller products. The software is owned by
+; TI and/or its suppliers, and is protected under applicable copyright
+; laws. You may not combine this software with "viral" open-source
+; software in order to form a larger program.
+;
+; THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+; NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+; NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+; A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+; CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+; DAMAGES, FOR ANY REASON WHATSOEVER.
+;
+; This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+;
+;******************************************************************************
+
+;******************************************************************************
+;
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+;******************************************************************************
+Stack EQU 0x00000100
+
+;******************************************************************************
+;
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+;******************************************************************************
+Heap EQU 0x00000000
+
+;******************************************************************************
+;
+; Allocate space for the stack.
+;
+;******************************************************************************
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+StackMem
+ SPACE Stack
+__initial_sp
+
+;******************************************************************************
+;
+; Allocate space for the heap.
+;
+;******************************************************************************
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+HeapMem
+ SPACE Heap
+__heap_limit
+
+;******************************************************************************
+;
+; Indicate that the code in this file preserves 8-byte alignment of the stack.
+;
+;******************************************************************************
+ PRESERVE8
+
+;******************************************************************************
+;
+; Place code into the reset code section.
+;
+;******************************************************************************
+ AREA RESET, CODE, READONLY
+ THUMB
+
+;******************************************************************************
+;
+; The vector table.
+;
+;******************************************************************************
+ EXPORT __Vectors
+__Vectors
+ DCD StackMem + Stack ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NmiSR ; NMI Handler
+ DCD FaultISR ; Hard Fault Handler
+ DCD IntDefaultHandler ; The MPU fault handler
+ DCD IntDefaultHandler ; The bus fault handler
+ DCD IntDefaultHandler ; The usage fault handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; SVCall handler
+ DCD IntDefaultHandler ; Debug monitor handler
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; The PendSV handler
+ DCD IntDefaultHandler ; The SysTick handler
+ DCD IntDefaultHandler ; GPIO Port A
+ DCD IntDefaultHandler ; GPIO Port B
+ DCD IntDefaultHandler ; GPIO Port C
+ DCD IntDefaultHandler ; GPIO Port D
+ DCD IntDefaultHandler ; GPIO Port E
+ DCD IntDefaultHandler ; UART0 Rx and Tx
+ DCD IntDefaultHandler ; UART1 Rx and Tx
+ DCD IntDefaultHandler ; SSI0 Rx and Tx
+ DCD IntDefaultHandler ; I2C0 Master and Slave
+ DCD IntDefaultHandler ; PWM Fault
+ DCD IntDefaultHandler ; PWM Generator 0
+ DCD IntDefaultHandler ; PWM Generator 1
+ DCD IntDefaultHandler ; PWM Generator 2
+ DCD IntDefaultHandler ; Quadrature Encoder 0
+ DCD IntDefaultHandler ; ADC Sequence 0
+ DCD IntDefaultHandler ; ADC Sequence 1
+ DCD IntDefaultHandler ; ADC Sequence 2
+ DCD IntDefaultHandler ; ADC Sequence 3
+ DCD IntDefaultHandler ; Watchdog timer
+ DCD IntDefaultHandler ; Timer 0 subtimer A
+ DCD IntDefaultHandler ; Timer 0 subtimer B
+ DCD IntDefaultHandler ; Timer 1 subtimer A
+ DCD IntDefaultHandler ; Timer 1 subtimer B
+ DCD IntDefaultHandler ; Timer 2 subtimer A
+ DCD IntDefaultHandler ; Timer 2 subtimer B
+ DCD IntDefaultHandler ; Analog Comparator 0
+ DCD IntDefaultHandler ; Analog Comparator 1
+ DCD IntDefaultHandler ; Analog Comparator 2
+ DCD IntDefaultHandler ; System Control (PLL, OSC, BO)
+ DCD IntDefaultHandler ; FLASH Control
+ DCD IntDefaultHandler ; GPIO Port F
+ DCD IntDefaultHandler ; GPIO Port G
+ DCD IntDefaultHandler ; GPIO Port H
+ DCD IntDefaultHandler ; UART2 Rx and Tx
+ DCD IntDefaultHandler ; SSI1 Rx and Tx
+ DCD IntDefaultHandler ; Timer 3 subtimer A
+ DCD IntDefaultHandler ; Timer 3 subtimer B
+ DCD IntDefaultHandler ; I2C1 Master and Slave
+ DCD IntDefaultHandler ; Quadrature Encoder 1
+ DCD IntDefaultHandler ; CAN0
+ DCD IntDefaultHandler ; CAN1
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; Hibernate
+ DCD IntDefaultHandler ; USB0
+ DCD IntDefaultHandler ; PWM Generator 3
+ DCD IntDefaultHandler ; uDMA Software Transfer
+ DCD IntDefaultHandler ; uDMA Error
+ DCD IntDefaultHandler ; ADC1 Sequence 0
+ DCD IntDefaultHandler ; ADC1 Sequence 1
+ DCD IntDefaultHandler ; ADC1 Sequence 2
+ DCD IntDefaultHandler ; ADC1 Sequence 3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; GPIO Port J
+ DCD IntDefaultHandler ; GPIO Port K
+ DCD IntDefaultHandler ; GPIO Port L
+ DCD IntDefaultHandler ; SSI2 Rx and Tx
+ DCD IntDefaultHandler ; SSI3 Rx and Tx
+ DCD IntDefaultHandler ; UART3 Rx and Tx
+ DCD IntDefaultHandler ; UART4 Rx and Tx
+ DCD IntDefaultHandler ; UART5 Rx and Tx
+ DCD IntDefaultHandler ; UART6 Rx and Tx
+ DCD IntDefaultHandler ; UART7 Rx and Tx
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; I2C2 Master and Slave
+ DCD IntDefaultHandler ; I2C3 Master and Slave
+ DCD IntDefaultHandler ; Timer 4 subtimer A
+ DCD IntDefaultHandler ; Timer 4 subtimer B
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; Timer 5 subtimer A
+ DCD IntDefaultHandler ; Timer 5 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 0 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 0 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 1 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 1 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 2 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 2 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 3 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 3 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 4 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 4 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 5 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 5 subtimer B
+ DCD IntDefaultHandler ; FPU
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; I2C4 Master and Slave
+ DCD IntDefaultHandler ; I2C5 Master and Slave
+ DCD IntDefaultHandler ; GPIO Port M
+ DCD IntDefaultHandler ; GPIO Port N
+ DCD IntDefaultHandler ; Quadrature Encoder 2
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; GPIO Port P (Summary or P0)
+ DCD IntDefaultHandler ; GPIO Port P1
+ DCD IntDefaultHandler ; GPIO Port P2
+ DCD IntDefaultHandler ; GPIO Port P3
+ DCD IntDefaultHandler ; GPIO Port P4
+ DCD IntDefaultHandler ; GPIO Port P5
+ DCD IntDefaultHandler ; GPIO Port P6
+ DCD IntDefaultHandler ; GPIO Port P7
+ DCD IntDefaultHandler ; GPIO Port Q (Summary or Q0)
+ DCD IntDefaultHandler ; GPIO Port Q1
+ DCD IntDefaultHandler ; GPIO Port Q2
+ DCD IntDefaultHandler ; GPIO Port Q3
+ DCD IntDefaultHandler ; GPIO Port Q4
+ DCD IntDefaultHandler ; GPIO Port Q5
+ DCD IntDefaultHandler ; GPIO Port Q6
+ DCD IntDefaultHandler ; GPIO Port Q7
+ DCD IntDefaultHandler ; GPIO Port R
+ DCD IntDefaultHandler ; GPIO Port S
+ DCD IntDefaultHandler ; PWM 1 Generator 0
+ DCD IntDefaultHandler ; PWM 1 Generator 1
+ DCD IntDefaultHandler ; PWM 1 Generator 2
+ DCD IntDefaultHandler ; PWM 1 Generator 3
+ DCD IntDefaultHandler ; PWM 1 Fault
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor first starts execution
+; following a reset event.
+;
+;******************************************************************************
+ EXPORT Reset_Handler
+Reset_Handler
+ ;
+ ; Enable the floating-point unit. This must be done here to handle the
+ ; case where main() uses floating-point and the function prologue saves
+ ; floating-point registers (which will fault if floating-point is not
+ ; enabled). Any configuration of the floating-point unit using
+ ; DriverLib APIs must be done here prior to the floating-point unit
+ ; being enabled.
+ ;
+ ; Note that this does not use DriverLib since it might not be included
+ ; in this project.
+ ;
+ MOVW R0, #0xED88
+ MOVT R0, #0xE000
+ LDR R1, [R0]
+ ORR R1, #0x00F00000
+ STR R1, [R0]
+
+ ;
+ ; Call the C library enty point that handles startup. This will copy
+ ; the .data section initializers from flash to SRAM and zero fill the
+ ; .bss section.
+ ;
+ IMPORT __main
+ B __main
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives a NMI. This
+; simply enters an infinite loop, preserving the system state for examination
+; by a debugger.
+;
+;******************************************************************************
+NmiSR
+ B NmiSR
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives a fault
+; interrupt. This simply enters an infinite loop, preserving the system state
+; for examination by a debugger.
+;
+;******************************************************************************
+FaultISR
+ B FaultISR
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives an unexpected
+; interrupt. This simply enters an infinite loop, preserving the system state
+; for examination by a debugger.
+;
+;******************************************************************************
+IntDefaultHandler
+ B IntDefaultHandler
+
+;******************************************************************************
+;
+; Make sure the end of this section is aligned.
+;
+;******************************************************************************
+ ALIGN
+
+;******************************************************************************
+;
+; Some code in the normal code section for initializing the heap and stack.
+;
+;******************************************************************************
+ AREA |.text|, CODE, READONLY
+
+;******************************************************************************
+;
+; The function expected of the C library startup code for defining the stack
+; and heap memory locations. For the C library version of the startup code,
+; provide this function so that the C library initialization code can find out
+; the location of the stack and heap.
+;
+;******************************************************************************
+ IF :DEF: __MICROLIB
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+ ELSE
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+__user_initial_stackheap
+ LDR R0, =HeapMem
+ LDR R1, =(StackMem + Stack)
+ LDR R2, =(HeapMem + Heap)
+ LDR R3, =StackMem
+ BX LR
+ ENDIF
+
+;******************************************************************************
+;
+; Make sure the end of this section is aligned.
+;
+;******************************************************************************
+ ALIGN
+
+;******************************************************************************
+;
+; Tell the assembler that we're done.
+;
+;******************************************************************************
+ END
diff --git a/boards/ek-tm4c123gxl/drivers/buttons.c b/boards/ek-tm4c123gxl/drivers/buttons.c new file mode 100644 index 0000000..2621ea2 --- /dev/null +++ b/boards/ek-tm4c123gxl/drivers/buttons.c @@ -0,0 +1,196 @@ +//*****************************************************************************
+//
+// buttons.c - Evaluation board driver for push buttons.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdbool.h>
+#include <stdint.h>
+#include "inc/hw_types.h"
+#include "inc/hw_memmap.h"
+#include "inc/hw_gpio.h"
+#include "driverlib/sysctl.h"
+#include "driverlib/rom.h"
+#include "driverlib/rom_map.h"
+#include "driverlib/pin_map.h"
+#include "driverlib/gpio.h"
+#include "drivers/buttons.h"
+
+//*****************************************************************************
+//
+//! \addtogroup buttons_api
+//! @{
+//
+//*****************************************************************************
+
+//*****************************************************************************
+//
+// Holds the current, debounced state of each button. A 0 in a bit indicates
+// that that button is currently pressed, otherwise it is released.
+// We assume that we start with all the buttons released (though if one is
+// pressed when the application starts, this will be detected).
+//
+//*****************************************************************************
+static uint8_t g_ui8ButtonStates = ALL_BUTTONS;
+
+//*****************************************************************************
+//
+//! Polls the current state of the buttons and determines which have changed.
+//!
+//! \param pui8Delta points to a character that will be written to indicate
+//! which button states changed since the last time this function was called.
+//! This value is derived from the debounced state of the buttons.
+//! \param pui8RawState points to a location where the raw button state will
+//! be stored.
+//!
+//! This function should be called periodically by the application to poll the
+//! pushbuttons. It determines both the current debounced state of the buttons
+//! and also which buttons have changed state since the last time the function
+//! was called.
+//!
+//! In order for button debouncing to work properly, this function should be
+//! caled at a regular interval, even if the state of the buttons is not needed
+//! that often.
+//!
+//! If button debouncing is not required, the the caller can pass a pointer
+//! for the \e pui8RawState parameter in order to get the raw state of the
+//! buttons. The value returned in \e pui8RawState will be a bit mask where
+//! a 1 indicates the buttons is pressed.
+//!
+//! \return Returns the current debounced state of the buttons where a 1 in the
+//! button ID's position indicates that the button is pressed and a 0
+//! indicates that it is released.
+//
+//*****************************************************************************
+uint8_t
+ButtonsPoll(uint8_t *pui8Delta, uint8_t *pui8RawState)
+{
+ uint32_t ui32Delta;
+ uint32_t ui32Data;
+ static uint8_t ui8SwitchClockA = 0;
+ static uint8_t ui8SwitchClockB = 0;
+
+ //
+ // Read the raw state of the push buttons. Save the raw state
+ // (inverting the bit sense) if the caller supplied storage for the
+ // raw value.
+ //
+ ui32Data = (ROM_GPIOPinRead(BUTTONS_GPIO_BASE, ALL_BUTTONS));
+ if(pui8RawState)
+ {
+ *pui8RawState = (uint8_t)~ui32Data;
+ }
+
+ //
+ // Determine the switches that are at a different state than the debounced
+ // state.
+ //
+ ui32Delta = ui32Data ^ g_ui8ButtonStates;
+
+ //
+ // Increment the clocks by one.
+ //
+ ui8SwitchClockA ^= ui8SwitchClockB;
+ ui8SwitchClockB = ~ui8SwitchClockB;
+
+ //
+ // Reset the clocks corresponding to switches that have not changed state.
+ //
+ ui8SwitchClockA &= ui32Delta;
+ ui8SwitchClockB &= ui32Delta;
+
+ //
+ // Get the new debounced switch state.
+ //
+ g_ui8ButtonStates &= ui8SwitchClockA | ui8SwitchClockB;
+ g_ui8ButtonStates |= (~(ui8SwitchClockA | ui8SwitchClockB)) & ui32Data;
+
+ //
+ // Determine the switches that just changed debounced state.
+ //
+ ui32Delta ^= (ui8SwitchClockA | ui8SwitchClockB);
+
+ //
+ // Store the bit mask for the buttons that have changed for return to
+ // caller.
+ //
+ if(pui8Delta)
+ {
+ *pui8Delta = (uint8_t)ui32Delta;
+ }
+
+ //
+ // Return the debounced buttons states to the caller. Invert the bit
+ // sense so that a '1' indicates the button is pressed, which is a
+ // sensible way to interpret the return value.
+ //
+ return(~g_ui8ButtonStates);
+}
+
+//*****************************************************************************
+//
+//! Initializes the GPIO pins used by the board pushbuttons.
+//!
+//! This function must be called during application initialization to
+//! configure the GPIO pins to which the pushbuttons are attached. It enables
+//! the port used by the buttons and configures each button GPIO as an input
+//! with a weak pull-up.
+//!
+//! \return None.
+//
+//*****************************************************************************
+void
+ButtonsInit(void)
+{
+ //
+ // Enable the GPIO port to which the pushbuttons are connected.
+ //
+ ROM_SysCtlPeripheralEnable(BUTTONS_GPIO_PERIPH);
+
+ //
+ // Unlock PF0 so we can change it to a GPIO input
+ // Once we have enabled (unlocked) the commit register then re-lock it
+ // to prevent further changes. PF0 is muxed with NMI thus a special case.
+ //
+ HWREG(BUTTONS_GPIO_BASE + GPIO_O_LOCK) = GPIO_LOCK_KEY;
+ HWREG(BUTTONS_GPIO_BASE + GPIO_O_CR) |= 0x01;
+ HWREG(BUTTONS_GPIO_BASE + GPIO_O_LOCK) = 0;
+
+ //
+ // Set each of the button GPIO pins as an input with a pull-up.
+ //
+ ROM_GPIODirModeSet(BUTTONS_GPIO_BASE, ALL_BUTTONS, GPIO_DIR_MODE_IN);
+ MAP_GPIOPadConfigSet(BUTTONS_GPIO_BASE, ALL_BUTTONS,
+ GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_STD_WPU);
+
+ //
+ // Initialize the debounced button state with the current state read from
+ // the GPIO bank.
+ //
+ g_ui8ButtonStates = ROM_GPIOPinRead(BUTTONS_GPIO_BASE, ALL_BUTTONS);
+}
+
+//*****************************************************************************
+//
+// Close the Doxygen group.
+//! @}
+//
+//*****************************************************************************
diff --git a/boards/ek-tm4c123gxl/drivers/buttons.h b/boards/ek-tm4c123gxl/drivers/buttons.h new file mode 100644 index 0000000..99ee799 --- /dev/null +++ b/boards/ek-tm4c123gxl/drivers/buttons.h @@ -0,0 +1,107 @@ +//*****************************************************************************
+//
+// buttons.h - Prototypes for the evaluation board buttons driver.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#ifndef __BUTTONS_H__
+#define __BUTTONS_H__
+
+//*****************************************************************************
+//
+// If building with a C++ compiler, make all of the definitions in this header
+// have a C binding.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+//*****************************************************************************
+//
+// Defines for the hardware resources used by the pushbuttons.
+//
+// The switches are on the following ports/pins:
+//
+// PF4 - Left Button
+// PF0 - Right Button
+//
+// The switches tie the GPIO to ground, so the GPIOs need to be configured
+// with pull-ups, and a value of 0 means the switch is pressed.
+//
+//*****************************************************************************
+#define BUTTONS_GPIO_PERIPH SYSCTL_PERIPH_GPIOF
+#define BUTTONS_GPIO_BASE GPIO_PORTF_BASE
+
+#define NUM_BUTTONS 2
+#define LEFT_BUTTON GPIO_PIN_4
+#define RIGHT_BUTTON GPIO_PIN_0
+
+#define ALL_BUTTONS (LEFT_BUTTON | RIGHT_BUTTON)
+
+//*****************************************************************************
+//
+// Useful macros for detecting button events.
+//
+//*****************************************************************************
+#define BUTTON_PRESSED(button, buttons, changed) \
+ (((button) & (changed)) && ((button) & (buttons)))
+
+#define BUTTON_RELEASED(button, buttons, changed) \
+ (((button) & (changed)) && !((button) & (buttons)))
+
+//*****************************************************************************
+//
+// If building with a C++ compiler, make all of the definitions in this header
+// have a C binding.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+//*****************************************************************************
+//
+// Functions exported from buttons.c
+//
+//*****************************************************************************
+extern void ButtonsInit(void);
+extern uint8_t ButtonsPoll(uint8_t *pui8Delta,
+ uint8_t *pui8Raw);
+
+//*****************************************************************************
+//
+// Mark the end of the C bindings section for C++ compilers.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+}
+#endif
+
+//*****************************************************************************
+//
+// Prototypes for the globals exported by this driver.
+//
+//*****************************************************************************
+
+#endif // __BUTTONS_H__
diff --git a/boards/ek-tm4c123gxl/drivers/rgb.c b/boards/ek-tm4c123gxl/drivers/rgb.c new file mode 100644 index 0000000..40a2c4d --- /dev/null +++ b/boards/ek-tm4c123gxl/drivers/rgb.c @@ -0,0 +1,404 @@ +//*****************************************************************************
+//
+// rgb.c - Evaluation board driver for RGB LED.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "inc/hw_types.h"
+#include "inc/hw_memmap.h"
+#include "inc/hw_timer.h"
+#include "inc/hw_ints.h"
+#include "driverlib/sysctl.h"
+#include "driverlib/rom.h"
+#include "driverlib/rom_map.h"
+#include "driverlib/pin_map.h"
+#include "driverlib/timer.h"
+#include "driverlib/gpio.h"
+#include "driverlib/interrupt.h"
+#include "rgb.h"
+
+//*****************************************************************************
+//
+//! \addtogroup rgb_api
+//! @{
+//
+//*****************************************************************************
+
+//*****************************************************************************
+//
+// This is a custom driver that allows the easy manipulation of the RGB LED.
+//
+// The driver uses the general purpose timers to govern the brightness of the
+// LED through simple PWM output mode of the GP Timers.
+//
+// A global array contains the current relative color of each of the three
+// LEDs. A global float variable controls intensity of the overall mixed color.
+//
+// This implementation consumes the following hardware resources
+// - Wide Timer 5B for blinking the entire RGB unit.
+// - Timer 0B intensity of an RGB element
+// - Timer 1A intensity of an RGB element
+// - Timer 1B intensity of an RGB element
+//
+//*****************************************************************************
+static uint32_t g_ui32Colors[3];
+static float g_fIntensity = 0.3f;
+
+//*****************************************************************************
+//
+//! Wide Timer interrupt to handle blinking effect of the RGB
+//!
+//! This function is called by the hardware interrupt controller on a timeout
+//! of the wide timer. This function must be in the NVIC table in the startup
+//! file. When called will toggle the enable flag to turn on or off the entire
+//! RGB unit. This creates a blinking effect. A wide timer is used since the
+//! blink is intended to be visible to the human eye and thus is expected to
+//! have a frequency between 15 and 0.1 hz. Currently blink duty is fixed at
+//! 50%.
+//!
+//! \return None.
+//
+//*****************************************************************************
+void
+RGBBlinkIntHandler(void)
+{
+ static unsigned long ulFlags;
+
+
+ //
+ // Clear the timer interrupt.
+ //
+ ROM_TimerIntClear(WTIMER5_BASE, TIMER_TIMB_TIMEOUT);
+
+ //
+ // Toggle the flag for the blink timer.
+ //
+ ulFlags ^= 1;
+
+ if(ulFlags)
+ {
+ RGBEnable();
+ }
+ else
+ {
+ RGBDisable();
+ }
+
+}
+
+//*****************************************************************************
+//
+//! Initializes the Timer and GPIO functionality associated with the RGB LED
+//!
+//! \param ui32Enable enables RGB immediately if set.
+//!
+//! This function must be called during application initialization to
+//! configure the GPIO pins to which the LEDs are attached. It enables
+//! the port used by the LEDs and configures each color's Timer. It optionally
+//! enables the RGB LED by configuring the GPIO pins and starting the timers.
+//!
+//! \return None.
+//
+//*****************************************************************************
+void
+RGBInit(uint32_t ui32Enable)
+{
+ //
+ // Enable the GPIO Port and Timer for each LED
+ //
+ ROM_SysCtlPeripheralEnable(RED_GPIO_PERIPH);
+ ROM_SysCtlPeripheralEnable(RED_TIMER_PERIPH);
+
+ ROM_SysCtlPeripheralEnable(GREEN_GPIO_PERIPH);
+ ROM_SysCtlPeripheralEnable(GREEN_TIMER_PERIPH);
+
+ ROM_SysCtlPeripheralEnable(BLUE_GPIO_PERIPH);
+ ROM_SysCtlPeripheralEnable(BLUE_TIMER_PERIPH);
+
+ //
+ // Configure each timer for output mode
+ //
+ HWREG(GREEN_TIMER_BASE + TIMER_O_CFG) = 0x04;
+ HWREG(GREEN_TIMER_BASE + TIMER_O_TAMR) = 0x0A;
+ HWREG(GREEN_TIMER_BASE + TIMER_O_TAILR) = 0xFFFF;
+
+ HWREG(BLUE_TIMER_BASE + TIMER_O_CFG) = 0x04;
+ HWREG(BLUE_TIMER_BASE + TIMER_O_TBMR) = 0x0A;
+ HWREG(BLUE_TIMER_BASE + TIMER_O_TBILR) = 0xFFFF;
+
+ HWREG(RED_TIMER_BASE + TIMER_O_CFG) = 0x04;
+ HWREG(RED_TIMER_BASE + TIMER_O_TBMR) = 0x0A;
+ HWREG(RED_TIMER_BASE + TIMER_O_TBILR) = 0xFFFF;
+
+ //
+ // Invert the output signals.
+ //
+ HWREG(RED_TIMER_BASE + TIMER_O_CTL) |= 0x4000;
+ HWREG(GREEN_TIMER_BASE + TIMER_O_CTL) |= 0x40;
+ HWREG(BLUE_TIMER_BASE + TIMER_O_CTL) |= 0x4000;
+
+ if(ui32Enable)
+ {
+ RGBEnable();
+ }
+
+ //
+ // Setup the blink functionality
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_WTIMER5);
+ ROM_TimerConfigure(WTIMER5_BASE, TIMER_CFG_B_PERIODIC | TIMER_CFG_SPLIT_PAIR);
+ ROM_TimerLoadSet64(WTIMER5_BASE, 0xFFFFFFFFFFFFFFFF);
+ ROM_IntEnable(INT_WTIMER5B);
+ ROM_TimerIntEnable(WTIMER5_BASE, TIMER_TIMB_TIMEOUT);
+
+
+}
+
+//*****************************************************************************
+//
+//! Enable the RGB LED with already configured timer settings
+//!
+//! This function or RGBDisable should be called during application
+//! initialization to configure the GPIO pins to which the LEDs are attached.
+//! This function enables the timers and configures the GPIO pins as timer
+//! outputs.
+//!
+//! \return None.
+//
+//*****************************************************************************
+void
+RGBEnable(void)
+{
+
+ //
+ // Enable timers to begin counting
+ //
+ ROM_TimerEnable(RED_TIMER_BASE, TIMER_BOTH);
+ ROM_TimerEnable(GREEN_TIMER_BASE, TIMER_BOTH);
+ ROM_TimerEnable(BLUE_TIMER_BASE, TIMER_BOTH);
+
+ //
+ // Reconfigure each LED's GPIO pad for timer control
+ //
+ ROM_GPIOPinConfigure(GREEN_GPIO_PIN_CFG);
+ ROM_GPIOPinTypeTimer(GREEN_GPIO_BASE, GREEN_GPIO_PIN);
+ MAP_GPIOPadConfigSet(GREEN_GPIO_BASE, GREEN_GPIO_PIN, GPIO_STRENGTH_8MA_SC,
+ GPIO_PIN_TYPE_STD);
+
+ ROM_GPIOPinConfigure(BLUE_GPIO_PIN_CFG);
+ ROM_GPIOPinTypeTimer(BLUE_GPIO_BASE, BLUE_GPIO_PIN);
+ MAP_GPIOPadConfigSet(BLUE_GPIO_BASE, BLUE_GPIO_PIN, GPIO_STRENGTH_8MA_SC,
+ GPIO_PIN_TYPE_STD);
+
+ ROM_GPIOPinConfigure(RED_GPIO_PIN_CFG);
+ ROM_GPIOPinTypeTimer(RED_GPIO_BASE, RED_GPIO_PIN);
+ MAP_GPIOPadConfigSet(RED_GPIO_BASE, RED_GPIO_PIN, GPIO_STRENGTH_8MA_SC,
+ GPIO_PIN_TYPE_STD);
+}
+
+//*****************************************************************************
+//
+//! Disable the RGB LED by configuring the GPIO's as inputs.
+//!
+//! This function or RGBEnable should be called during application
+//! initialization to configure the GPIO pins to which the LEDs are attached.
+//! This function disables the timers and configures the GPIO pins as inputs
+//! for minimum current draw.
+//!
+//! \return None.
+//
+//*****************************************************************************
+void
+RGBDisable(void)
+{
+ //
+ // Configure the GPIO pads as general purpose inputs.
+ //
+ ROM_GPIOPinTypeGPIOInput(RED_GPIO_BASE, RED_GPIO_PIN);
+ ROM_GPIOPinTypeGPIOInput(GREEN_GPIO_BASE, GREEN_GPIO_PIN);
+ ROM_GPIOPinTypeGPIOInput(BLUE_GPIO_BASE, BLUE_GPIO_PIN);
+
+ //
+ // Stop the timer counting.
+ //
+ ROM_TimerDisable(RED_TIMER_BASE, TIMER_BOTH);
+ ROM_TimerDisable(GREEN_TIMER_BASE, TIMER_BOTH);
+ ROM_TimerDisable(BLUE_TIMER_BASE, TIMER_BOTH);
+}
+
+//*****************************************************************************
+//
+//! Set the output color and intensity.
+//!
+//! \param pui32RGBColor points to a three element array representing the
+//! relative intensity of each color. Red is element 0, Green is element 1,
+//! Blue is element 2. 0x0000 is off. 0xFFFF is fully on.
+//!
+//! \param fIntensity is used to scale the intensity of all three colors by
+//! the same amount. fIntensity should be between 0.0 and 1.0. This scale
+//! factor is applied to all three colors.
+//!
+//! This function should be called by the application to set the color and
+//! intensity of the RGB LED.
+//!
+//! \return None.
+//
+//*****************************************************************************
+void
+RGBSet(volatile uint32_t * pui32RGBColor, float fIntensity)
+{
+ RGBColorSet(pui32RGBColor);
+ RGBIntensitySet(fIntensity);
+}
+
+//*****************************************************************************
+//
+//! Set the output color.
+//!
+//! \param pui32RGBColor points to a three element array representing the
+//! relative intensity of each color. Red is element 0, Green is element 1,
+//! Blue is element 2. 0x0000 is off. 0xFFFF is fully on.
+//!
+//! This function should be called by the application to set the color
+//! of the RGB LED.
+//!
+//! \return None.
+//
+//*****************************************************************************
+void
+RGBColorSet(volatile uint32_t * pui32RGBColor)
+{
+ uint32_t ui32Color[3];
+ uint32_t ui32Index;
+
+ for(ui32Index=0; ui32Index < 3; ui32Index++)
+ {
+ g_ui32Colors[ui32Index] = pui32RGBColor[ui32Index];
+ ui32Color[ui32Index] = (uint32_t) (((float) pui32RGBColor[ui32Index]) *
+ g_fIntensity + 0.5f);
+
+ if(ui32Color[ui32Index] > 0xFFFF)
+ {
+ ui32Color[ui32Index] = 0xFFFF;
+ }
+ }
+
+ ROM_TimerMatchSet(RED_TIMER_BASE, RED_TIMER, ui32Color[RED]);
+ ROM_TimerMatchSet(GREEN_TIMER_BASE, GREEN_TIMER, ui32Color[GREEN]);
+ ROM_TimerMatchSet(BLUE_TIMER_BASE, BLUE_TIMER, ui32Color[BLUE]);
+}
+
+//*****************************************************************************
+//
+//! Set the current output intensity.
+//!
+//! \param fIntensity is used to scale the intensity of all three colors by
+//! the same amount. fIntensity should be between 0.0 and 1.0. This scale
+//! factor is applied individually to all three colors.
+//!
+//! This function should be called by the application to set the intensity
+//! of the RGB LED.
+//!
+//! \return None.
+//
+//*****************************************************************************
+void
+RGBIntensitySet(float fIntensity)
+{
+ g_fIntensity = fIntensity;
+ RGBColorSet(g_ui32Colors);
+}
+
+//*****************************************************************************
+//
+//! Sets the blink rate of the RGB Led
+//!
+//! \param fRate is the blink rate in hertz.
+//!
+//! This function controls the blink rate of the RGB LED in auto blink mode.
+//! to enable blinking pass a non-zero floating pointer number. To disable
+//! pass 0.0f as the argument. Calling this function will override the current
+//! RGBDisable or RGBEnable status.
+//!
+//! \return None.
+//
+//*****************************************************************************
+void
+RGBBlinkRateSet(float fRate)
+{
+ uint64_t ui64Load;
+
+ if(fRate == 0.0f)
+ {
+ //
+ // Disable the timer and enable the RGB. If blink rate is zero we
+ // assume we want the RGB to be enabled. To disable call RGBDisable
+ //
+ ROM_TimerDisable(WTIMER5_BASE, TIMER_B);
+ RGBEnable();
+ }
+ else
+ {
+ //
+ // Keep the math in floating pointing until the end so that we keep as
+ // much precision as we can.
+ //
+ ui64Load = (uint64_t) (((float)SysCtlClockGet()) / (fRate * 2.0f));
+ ROM_TimerLoadSet(WTIMER5_BASE, TIMER_B, ui64Load);
+ ROM_TimerEnable(WTIMER5_BASE, TIMER_B);
+ }
+
+}
+
+//*****************************************************************************
+//
+//! Get the output color.
+//!
+//! \param pui32RGBColor points to a three element array representing the
+//! relative intensity of each color. Red is element 0, Green is element 1,
+//! Blue is element 2. 0x0000 is off. 0xFFFF is fully on. Caller must allocate
+//! and pass a pointer to a three element array of uint32_ts.
+//!
+//! This function should be called by the application to get the current color
+//! of the RGB LED.
+//!
+//! \return None.
+//
+//*****************************************************************************
+void
+RGBColorGet(uint32_t * pui32RGBColor)
+{
+ uint32_t ui32Index;
+
+ for(ui32Index=0; ui32Index < 3; ui32Index++)
+ {
+ pui32RGBColor[ui32Index] = g_ui32Colors[ui32Index];
+ }
+}
+
+//*****************************************************************************
+//
+// Close the Doxygen group.
+//! @}
+//
+//*****************************************************************************
diff --git a/boards/ek-tm4c123gxl/drivers/rgb.h b/boards/ek-tm4c123gxl/drivers/rgb.h new file mode 100644 index 0000000..1a23717 --- /dev/null +++ b/boards/ek-tm4c123gxl/drivers/rgb.h @@ -0,0 +1,142 @@ +//*****************************************************************************
+//
+// rgb.h - Prototypes for the evaluation board RGB LED driver.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#ifndef __RGBLED_H__
+#define __RGBLED_H__
+
+//*****************************************************************************
+//
+// Defines for the hardware resources used by the pushbuttons.
+//
+// The switches are on the following ports/pins:
+//
+// PF1 - RED (632 nanometer)
+// PF2 - GREEN (518 nanometer)
+// PF3 - BLUE (465 nanometer)
+
+//
+// The RGB LED is tied up to 5V but since the lowest Vf is 1.75 we can still
+// use a General Purpose Timer in pulse out mode.
+//
+//*****************************************************************************
+
+//
+// Indexes into the array of colors
+//
+#define RED 0
+#define GREEN 1
+#define BLUE 2
+
+//
+// Ratio for percent of full on that should be "true" white.
+//
+#define RED_WHITE_BALANCE 0.497f
+#define GREEN_WHITE_BALANCE 0.6f
+#define BLUE_WHITE_BALANCE 1.0f
+
+//
+// GPIO, Timer, Peripheral, and Pin assignments for the colors
+//
+#define RED_GPIO_PERIPH SYSCTL_PERIPH_GPIOF
+#define RED_TIMER_PERIPH SYSCTL_PERIPH_TIMER0
+#define BLUE_GPIO_PERIPH SYSCTL_PERIPH_GPIOF
+#define BLUE_TIMER_PERIPH SYSCTL_PERIPH_TIMER1
+#define GREEN_GPIO_PERIPH SYSCTL_PERIPH_GPIOF
+#define GREEN_TIMER_PERIPH SYSCTL_PERIPH_TIMER1
+
+
+#define RED_GPIO_BASE GPIO_PORTF_BASE
+#define RED_TIMER_BASE TIMER0_BASE
+#define BLUE_GPIO_BASE GPIO_PORTF_BASE
+#define BLUE_TIMER_BASE TIMER1_BASE
+#define GREEN_GPIO_BASE GPIO_PORTF_BASE
+#define GREEN_TIMER_BASE TIMER1_BASE
+
+#define RED_GPIO_PIN GPIO_PIN_1
+#define BLUE_GPIO_PIN GPIO_PIN_2
+#define GREEN_GPIO_PIN GPIO_PIN_3
+
+
+#define RED_GPIO_PIN_CFG GPIO_PF1_T0CCP1
+#define BLUE_GPIO_PIN_CFG GPIO_PF2_T1CCP0
+#define GREEN_GPIO_PIN_CFG GPIO_PF3_T1CCP1
+
+#define RED_TIMER_CFG TIMER_CFG_B_PWM
+#define BLUE_TIMER_CFG TIMER_CFG_A_PWM
+#define GREEN_TIMER_CFG TIMER_CFG_B_PWM
+
+#define RED_TIMER TIMER_B
+#define BLUE_TIMER TIMER_A
+#define GREEN_TIMER TIMER_B
+
+
+//*****************************************************************************
+//
+// Useful macros
+//
+//*****************************************************************************
+
+//*****************************************************************************
+//
+// If building with a C++ compiler, make all of the definitions in this header
+// have a C binding.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+//*****************************************************************************
+//
+// Functions exported from rgb.c
+//
+//*****************************************************************************
+extern void RGBInit(uint32_t ui32Enable);
+
+extern void RGBEnable(void);
+extern void RGBDisable(void);
+extern void RGBSet(volatile uint32_t * pui32RGBColor, float fIntensity);
+extern void RGBColorSet(volatile uint32_t * pui32RGBColor);
+
+extern void RGBIntensitySet(float fIntensity);
+extern void RGBBlinkRateSet(float fRate);
+extern void RGBGet(uint32_t * pui32RGBColor, float * pfIntensity);
+
+//*****************************************************************************
+//
+// Mark the end of the C bindings section for C++ compilers.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+}
+#endif
+
+//*****************************************************************************
+//
+// Prototypes for the globals exported by this driver.
+//
+//*****************************************************************************
+
+#endif // __RGBLED_H__
diff --git a/boards/ek-tm4c123gxl/ek-tm4c123gxl.eww b/boards/ek-tm4c123gxl/ek-tm4c123gxl.eww new file mode 100644 index 0000000..b4e504a --- /dev/null +++ b/boards/ek-tm4c123gxl/ek-tm4c123gxl.eww @@ -0,0 +1,128 @@ +<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>
+ <project>
+ <path>$WS_DIR$\..\..\..\driverlib\driverlib.ewp</path>
+ </project>
+ <project>
+ <path>$WS_DIR$\..\..\..\usblib\usblib.ewp</path>
+ </project>
+ <project>
+ <path>$WS_DIR$\bitband\bitband.ewp</path>
+ </project>
+ <project>
+ <path>$WS_DIR$\blinky\blinky.ewp</path>
+ </project>
+ <project>
+ <path>$WS_DIR$\freertos_demo\freertos_demo.ewp</path>
+ </project>
+ <project>
+ <path>$WS_DIR$\gpio_jtag\gpio_jtag.ewp</path>
+ </project>
+ <project>
+ <path>$WS_DIR$\hello\hello.ewp</path>
+ </project>
+ <project>
+ <path>$WS_DIR$\interrupts\interrupts.ewp</path>
+ </project>
+ <project>
+ <path>$WS_DIR$\mpu_fault\mpu_fault.ewp</path>
+ </project>
+ <project>
+ <path>$WS_DIR$\project0\project0.ewp</path>
+ </project>
+ <project>
+ <path>$WS_DIR$\qs-rgb\qs-rgb.ewp</path>
+ </project>
+ <project>
+ <path>$WS_DIR$\timers\timers.ewp</path>
+ </project>
+ <project>
+ <path>$WS_DIR$\uart_echo\uart_echo.ewp</path>
+ </project>
+ <project>
+ <path>$WS_DIR$\udma_demo\udma_demo.ewp</path>
+ </project>
+ <project>
+ <path>$WS_DIR$\usb_dev_bulk\usb_dev_bulk.ewp</path>
+ </project>
+ <project>
+ <path>$WS_DIR$\usb_dev_gamepad\usb_dev_gamepad.ewp</path>
+ </project>
+ <project>
+ <path>$WS_DIR$\usb_dev_serial\usb_dev_serial.ewp</path>
+ </project>
+ <batchBuild>
+ <batchDefinition>
+ <name>All Examples</name>
+ <member>
+ <project>driverlib</project>
+ <configuration>Debug</configuration>
+ </member>
+ <member>
+ <project>usblib</project>
+ <configuration>Debug</configuration>
+ </member>
+ <member>
+ <project>bitband</project>
+ <configuration>Debug</configuration>
+ </member>
+ <member>
+ <project>blinky</project>
+ <configuration>Debug</configuration>
+ </member>
+ <member>
+ <project>freertos_demo</project>
+ <configuration>Debug</configuration>
+ </member>
+ <member>
+ <project>gpio_jtag</project>
+ <configuration>Debug</configuration>
+ </member>
+ <member>
+ <project>hello</project>
+ <configuration>Debug</configuration>
+ </member>
+ <member>
+ <project>interrupts</project>
+ <configuration>Debug</configuration>
+ </member>
+ <member>
+ <project>mpu_fault</project>
+ <configuration>Debug</configuration>
+ </member>
+ <member>
+ <project>project0</project>
+ <configuration>Debug</configuration>
+ </member>
+ <member>
+ <project>qs-rgb</project>
+ <configuration>Debug</configuration>
+ </member>
+ <member>
+ <project>timers</project>
+ <configuration>Debug</configuration>
+ </member>
+ <member>
+ <project>uart_echo</project>
+ <configuration>Debug</configuration>
+ </member>
+ <member>
+ <project>udma_demo</project>
+ <configuration>Debug</configuration>
+ </member>
+ <member>
+ <project>usb_dev_bulk</project>
+ <configuration>Debug</configuration>
+ </member>
+ <member>
+ <project>usb_dev_gamepad</project>
+ <configuration>Debug</configuration>
+ </member>
+ <member>
+ <project>usb_dev_serial</project>
+ <configuration>Debug</configuration>
+ </member>
+ </batchDefinition>
+ </batchBuild>
+</workspace>
diff --git a/boards/ek-tm4c123gxl/ek-tm4c123gxl.uvmpw b/boards/ek-tm4c123gxl/ek-tm4c123gxl.uvmpw new file mode 100644 index 0000000..9365d0d --- /dev/null +++ b/boards/ek-tm4c123gxl/ek-tm4c123gxl.uvmpw @@ -0,0 +1,95 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectWorkspace xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_mpw.xsd">
+
+ <SchemaVersion>1.0</SchemaVersion>
+
+ <Header>### uVision Project, (C) Keil Software</Header>
+
+ <WorkspaceName>ek-tm4c123gxl</WorkspaceName>
+
+ <project>
+ <PathAndName>..\..\..\driverlib\driverlib.uvproj</PathAndName>
+ <NodeIsCheckedInBatchBuild>1</NodeIsCheckedInBatchBuild>
+ </project>
+
+ <project>
+ <PathAndName>..\..\..\usblib\usblib.uvproj</PathAndName>
+ <NodeIsCheckedInBatchBuild>1</NodeIsCheckedInBatchBuild>
+ </project>
+
+ <project>
+ <PathAndName>.\bitband\bitband.uvproj</PathAndName>
+ <NodeIsCheckedInBatchBuild>1</NodeIsCheckedInBatchBuild>
+ </project>
+
+ <project>
+ <PathAndName>.\blinky\blinky.uvproj</PathAndName>
+ <NodeIsCheckedInBatchBuild>1</NodeIsCheckedInBatchBuild>
+ </project>
+
+ <project>
+ <PathAndName>.\freertos_demo\freertos_demo.uvproj</PathAndName>
+ <NodeIsCheckedInBatchBuild>1</NodeIsCheckedInBatchBuild>
+ </project>
+
+ <project>
+ <PathAndName>.\gpio_jtag\gpio_jtag.uvproj</PathAndName>
+ <NodeIsCheckedInBatchBuild>1</NodeIsCheckedInBatchBuild>
+ </project>
+
+ <project>
+ <PathAndName>.\hello\hello.uvproj</PathAndName>
+ <NodeIsCheckedInBatchBuild>1</NodeIsCheckedInBatchBuild>
+ </project>
+
+ <project>
+ <PathAndName>.\interrupts\interrupts.uvproj</PathAndName>
+ <NodeIsCheckedInBatchBuild>1</NodeIsCheckedInBatchBuild>
+ </project>
+
+ <project>
+ <PathAndName>.\mpu_fault\mpu_fault.uvproj</PathAndName>
+ <NodeIsCheckedInBatchBuild>1</NodeIsCheckedInBatchBuild>
+ </project>
+
+ <project>
+ <PathAndName>.\project0\project0.uvproj</PathAndName>
+ <NodeIsCheckedInBatchBuild>1</NodeIsCheckedInBatchBuild>
+ </project>
+
+ <project>
+ <PathAndName>.\qs-rgb\qs-rgb.uvproj</PathAndName>
+ <NodeIsCheckedInBatchBuild>1</NodeIsCheckedInBatchBuild>
+ </project>
+
+ <project>
+ <PathAndName>.\timers\timers.uvproj</PathAndName>
+ <NodeIsCheckedInBatchBuild>1</NodeIsCheckedInBatchBuild>
+ </project>
+
+ <project>
+ <PathAndName>.\uart_echo\uart_echo.uvproj</PathAndName>
+ <NodeIsCheckedInBatchBuild>1</NodeIsCheckedInBatchBuild>
+ </project>
+
+ <project>
+ <PathAndName>.\udma_demo\udma_demo.uvproj</PathAndName>
+ <NodeIsCheckedInBatchBuild>1</NodeIsCheckedInBatchBuild>
+ </project>
+
+ <project>
+ <PathAndName>.\usb_dev_bulk\usb_dev_bulk.uvproj</PathAndName>
+ <NodeIsCheckedInBatchBuild>1</NodeIsCheckedInBatchBuild>
+ </project>
+
+ <project>
+ <PathAndName>.\usb_dev_gamepad\usb_dev_gamepad.uvproj</PathAndName>
+ <NodeIsCheckedInBatchBuild>1</NodeIsCheckedInBatchBuild>
+ </project>
+
+ <project>
+ <PathAndName>.\usb_dev_serial\usb_dev_serial.uvproj</PathAndName>
+ <NodeIsCheckedInBatchBuild>1</NodeIsCheckedInBatchBuild>
+ </project>
+
+</ProjectWorkspace>
diff --git a/boards/ek-tm4c123gxl/freertos_demo/FreeRTOSConfig.h b/boards/ek-tm4c123gxl/freertos_demo/FreeRTOSConfig.h new file mode 100644 index 0000000..4e858c2 --- /dev/null +++ b/boards/ek-tm4c123gxl/freertos_demo/FreeRTOSConfig.h @@ -0,0 +1,107 @@ +/*
+ FreeRTOS V7.0.2 - Copyright (C) 2011 Real Time Engineers Ltd.
+
+
+ ***************************************************************************
+ * *
+ * FreeRTOS tutorial books are available in pdf and paperback. *
+ * Complete, revised, and edited pdf reference manuals are also *
+ * available. *
+ * *
+ * Purchasing FreeRTOS documentation will not only help you, by *
+ * ensuring you get running as quickly as possible and with an *
+ * in-depth knowledge of how to use FreeRTOS, it will also help *
+ * the FreeRTOS project to continue with its mission of providing *
+ * professional grade, cross platform, de facto standard solutions *
+ * for microcontrollers - completely free of charge! *
+ * *
+ * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *
+ * *
+ * Thank you for using FreeRTOS, and thank you for your support! *
+ * *
+ ***************************************************************************
+
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ >>>NOTE<<< The modification to the GPL is included to allow you to
+ distribute a combined work that includes FreeRTOS without being obliged to
+ provide the source code for proprietary components outside of the FreeRTOS
+ kernel. FreeRTOS is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
+ *
+ * See http://www.freertos.org/a00110.html.
+ *----------------------------------------------------------*/
+
+#define configUSE_PREEMPTION 1
+#define configUSE_IDLE_HOOK 0
+#define configUSE_TICK_HOOK 0
+#define configCPU_CLOCK_HZ ( ( unsigned long ) 50000000 )
+#define configTICK_RATE_HZ ( ( portTickType ) 1000 )
+#define configMINIMAL_STACK_SIZE ( ( unsigned short ) 200 )
+#define configTOTAL_HEAP_SIZE ( ( size_t ) ( 30000 ) )
+#define configMAX_TASK_NAME_LEN ( 12 )
+#define configUSE_TRACE_FACILITY 1
+#define configUSE_16_BIT_TICKS 0
+#define configIDLE_SHOULD_YIELD 0
+#define configUSE_CO_ROUTINES 0
+#define configUSE_MUTEXES 1
+#define configUSE_RECURSIVE_MUTEXES 1
+#define configCHECK_FOR_STACK_OVERFLOW 2
+
+#define configMAX_PRIORITIES ( ( unsigned portBASE_TYPE ) 16 )
+#define configMAX_CO_ROUTINE_PRIORITIES ( 2 )
+#define configQUEUE_REGISTRY_SIZE 10
+
+/* Set the following definitions to 1 to include the API function, or zero
+to exclude the API function. */
+
+#define INCLUDE_vTaskPrioritySet 1
+#define INCLUDE_uxTaskPriorityGet 1
+#define INCLUDE_vTaskDelete 1
+#define INCLUDE_vTaskCleanUpResources 0
+#define INCLUDE_vTaskSuspend 1
+#define INCLUDE_vTaskDelayUntil 1
+#define INCLUDE_vTaskDelay 1
+#define INCLUDE_uxTaskGetStackHighWaterMark 1
+
+/* Be ENORMOUSLY careful if you want to modify these two values and make sure
+ * you read http://www.freertos.org/a00110.html#kernel_priority first!
+ */
+#define configKERNEL_INTERRUPT_PRIORITY ( 7 << 5 ) /* Priority 7, or 0xE0 as only the top three bits are implemented. This is the lowest priority. */
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY ( 5 << 5 ) /* Priority 5, or 0xA0 as only the top three bits are implemented. */
+
+#endif /* FREERTOS_CONFIG_H */
diff --git a/boards/ek-tm4c123gxl/freertos_demo/Makefile b/boards/ek-tm4c123gxl/freertos_demo/Makefile new file mode 100644 index 0000000..229f028 --- /dev/null +++ b/boards/ek-tm4c123gxl/freertos_demo/Makefile @@ -0,0 +1,105 @@ +#******************************************************************************
+#
+# Makefile - Rules for building the FreeRTOS example.
+#
+# Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+# Software License Agreement
+#
+# Texas Instruments (TI) is supplying this software for use solely and
+# exclusively on TI's microcontroller products. The software is owned by
+# TI and/or its suppliers, and is protected under applicable copyright
+# laws. You may not combine this software with "viral" open-source
+# software in order to form a larger program.
+#
+# THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+# NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+# NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+# CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+# DAMAGES, FOR ANY REASON WHATSOEVER.
+#
+# This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+#
+#******************************************************************************
+
+#
+# Defines the part type that this project uses.
+#
+PART=TM4C123GH6PM
+
+#
+# The base directory for TivaWare.
+#
+ROOT=../../../..
+
+#
+# Include the common make definitions.
+#
+include ${ROOT}/makedefs
+
+#
+# Where to find source files that do not live in this directory.
+#
+VPATH=../../../../third_party/FreeRTOS/Source/portable/GCC/ARM_CM4F
+VPATH+=../../../../third_party/FreeRTOS/Source/portable/MemMang/
+VPATH+=../../../../third_party/FreeRTOS/Source
+VPATH+=../drivers
+VPATH+=../../../../utils
+
+#
+# Where to find header files that do not live in the source directory.
+#
+IPATH=.
+IPATH+=..
+IPATH+=../../../..
+IPATH+=../../../../third_party/FreeRTOS/Source/portable/GCC/ARM_CM4F
+IPATH+=../../../../third_party/FreeRTOS
+IPATH+=../../../../third_party/FreeRTOS/Source/include
+IPATH+=../../../../third_party
+
+#
+# The default rule, which causes the FreeRTOS example to be built.
+#
+all: ${COMPILER}
+all: ${COMPILER}/freertos_demo.axf
+
+#
+# The rule to clean out all the build products.
+#
+clean:
+ @rm -rf ${COMPILER} ${wildcard *~}
+
+#
+# The rule to create the target directory.
+#
+${COMPILER}:
+ @mkdir -p ${COMPILER}
+
+#
+# Rules for building the FreeRTOS example.
+#
+${COMPILER}/freertos_demo.axf: ${COMPILER}/buttons.o
+${COMPILER}/freertos_demo.axf: ${COMPILER}/freertos_demo.o
+${COMPILER}/freertos_demo.axf: ${COMPILER}/heap_2.o
+${COMPILER}/freertos_demo.axf: ${COMPILER}/led_task.o
+${COMPILER}/freertos_demo.axf: ${COMPILER}/list.o
+${COMPILER}/freertos_demo.axf: ${COMPILER}/port.o
+${COMPILER}/freertos_demo.axf: ${COMPILER}/queue.o
+${COMPILER}/freertos_demo.axf: ${COMPILER}/rgb.o
+${COMPILER}/freertos_demo.axf: ${COMPILER}/startup_${COMPILER}.o
+${COMPILER}/freertos_demo.axf: ${COMPILER}/switch_task.o
+${COMPILER}/freertos_demo.axf: ${COMPILER}/tasks.o
+${COMPILER}/freertos_demo.axf: ${COMPILER}/uartstdio.o
+${COMPILER}/freertos_demo.axf: ${COMPILER}/ustdlib.o
+${COMPILER}/freertos_demo.axf: ${ROOT}/driverlib/${COMPILER}/libdriver.a
+${COMPILER}/freertos_demo.axf: freertos_demo.ld
+SCATTERgcc_freertos_demo=freertos_demo.ld
+ENTRY_freertos_demo=ResetISR
+CFLAGSgcc=-DTARGET_IS_TM4C123_RB1
+
+#
+# Include the automatically generated dependency files.
+#
+ifneq (${MAKECMDGOALS},clean)
+-include ${wildcard ${COMPILER}/*.d} __dummy__
+endif
diff --git a/boards/ek-tm4c123gxl/freertos_demo/ccs/.ccsimportspec b/boards/ek-tm4c123gxl/freertos_demo/ccs/.ccsimportspec new file mode 100644 index 0000000..ef4631a --- /dev/null +++ b/boards/ek-tm4c123gxl/freertos_demo/ccs/.ccsimportspec @@ -0,0 +1,14 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<importSpec>
+ <source root="..">
+ <file name="FreeRTOSConfig.h"/>
+ <file name="freertos_demo.c"/>
+ <file name="led_task.c"/>
+ <file name="led_task.h"/>
+ <file name="switch_task.c"/>
+ <file name="switch_task.h"/>
+ <file name="priorities.h"/>
+ <file regex=".*_ccs\.cmd"/>
+ <file name="startup_ccs.c"/>
+ </source>
+</importSpec>
diff --git a/boards/ek-tm4c123gxl/freertos_demo/ccs/.ccsproject b/boards/ek-tm4c123gxl/freertos_demo/ccs/.ccsproject new file mode 100644 index 0000000..75fb50e --- /dev/null +++ b/boards/ek-tm4c123gxl/freertos_demo/ccs/.ccsproject @@ -0,0 +1,10 @@ +<?xml version="1.0" encoding="UTF-8" ?>
+<?ccsproject version="1.0"?>
+<projectOptions>
+ <deviceVariant value="Cortex M.TM4C123GH6PM"/>
+ <deviceFamily value="TMS470"/>
+ <deviceEndianness value="little"/>
+ <codegenToolVersion value="5.0.4"/>
+ <isElfFormat value="true"/>
+ <rts value="libc.a"/>
+</projectOptions>
diff --git a/boards/ek-tm4c123gxl/freertos_demo/ccs/.cproject b/boards/ek-tm4c123gxl/freertos_demo/ccs/.cproject new file mode 100644 index 0000000..d56095a --- /dev/null +++ b/boards/ek-tm4c123gxl/freertos_demo/ccs/.cproject @@ -0,0 +1,199 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+ <storageModule configRelations="2" moduleId="org.eclipse.cdt.core.settings">
+ <cconfiguration id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.2032220949">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.2032220949" moduleId="org.eclipse.cdt.core.settings" name="Debug">
+ <macros>
+ <stringMacro name="SW_ROOT" type="VALUE_PATH_DIR" value="${PROJECT_ROOT}/../../../../.."/>
+ </macros>
+ <externalSettings/>
+ <extensions>
+ <extension id="com.ti.ccstudio.binaryparser.CoffParser" point="org.eclipse.cdt.core.BinaryParser"/>
+ <extension id="com.ti.ccstudio.errorparser.CoffErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.LinkErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.AsmErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactExtension="out" artifactName="${ProjName}" buildProperties="" cleanCommand="${CG_CLEAN_CMD}" description="" id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.2032220949" name="Debug" parent="com.ti.ccstudio.buildDefinitions.TMS470.Debug" postbuildStep=""${CCE_INSTALL_ROOT}/utils/tiobj2bin/tiobj2bin" "${BuildArtifactFileName}" "${BuildArtifactFileBaseName}.bin" "${CG_TOOL_ROOT}/bin/armofd" "${CG_TOOL_ROOT}/bin/armhex" "${CCE_INSTALL_ROOT}/utils/tiobj2bin/mkhex4bin"">
+ <folderInfo id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.2032220949." name="/" resourcePath="">
+ <toolChain id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.DebugToolchain.1476787750" name="TI Build Tools" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.DebugToolchain" targetTool="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug.1771805955">
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS.19037626" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS" valueType="stringList">
+ <listOptionValue builtIn="false" value="DEVICE_CONFIGURATION_ID=Cortex M.TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="DEVICE_ENDIANNESS=little"/>
+ <listOptionValue builtIn="false" value="OUTPUT_FORMAT=ELF"/>
+ <listOptionValue builtIn="false" value="CCS_MBS_VERSION=5.1.0.01"/>
+ <listOptionValue builtIn="false" value="RUNTIME_SUPPORT_LIBRARY=libc.a"/>
+ <listOptionValue builtIn="false" value="OUTPUT_TYPE=executable"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION.2106036483" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION" value="5.0.4" valueType="string"/>
+ <targetPlatform id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformDebug.655717978" name="Platform" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformDebug"/>
+ <builder buildPath="${BuildDirectory}" id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderDebug.607764601" name="GNU Make.Debug" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderDebug"/>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerDebug.1443889237" name="ARM Compiler" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerDebug">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.1502577240" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.7M4" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.843901147" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.1838828442" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.eabi" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.1881110681" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.FPv4SPD16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL.237948578" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL.SYMDEBUG__DWARF" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING.2120646894" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING" valueType="stringList">
+ <listOptionValue builtIn="false" value="225"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER.2034415495" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.1931931592" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH.1132481489" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH" valueType="includePath">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/examples/boards/ek-tm4c123gxl""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/third_party""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/third_party/FreeRTOS/Source/include""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/third_party/FreeRTOS""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/third_party/FreeRTOS/Source/portable/CCS/ARM_CM4F""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN.627895633" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.1222304933" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.on" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL.739372510" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL.2" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC.193573771" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL.447280838" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE.1017466365" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE" valueType="definedSymbols">
+ <listOptionValue builtIn="false" value="ccs="ccs""/>
+ <listOptionValue builtIn="false" value="PART_TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="TARGET_IS_TM4C123_RB1"/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS.140460430" name="C Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS.1231962123" name="C++ Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS.609181628" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS.1090183179" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS"/>
+ </tool>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug.1771805955" name="ARM Linker" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE.1011026236" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE" value=""freertos_demo_ccs.map"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE.414345778" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE" value="512" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE.298981234" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE" value="0" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE.2022573887" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE" value=""${ProjName}.out"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO.15661916" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO" value=""${ProjName}_linkInfo.xml"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER.849432168" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.1014958740" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH.1170732310" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH" valueType="libPaths">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/lib""/>
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY.340465323" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY" valueType="libs">
+ <listOptionValue builtIn="false" value=""libc.a""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/driverlib/ccs/Debug/driverlib.lib""/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS.674288125" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS.1189515491" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS.635006945" name="Generated Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS"/>
+ </tool>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ <cconfiguration id="com.ti.ccstudio.buildDefinitions.TMS470.Release.426113604">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.ti.ccstudio.buildDefinitions.TMS470.Release.426113604" moduleId="org.eclipse.cdt.core.settings" name="Release">
+ <macros>
+ <stringMacro name="SW_ROOT" type="VALUE_PATH_DIR" value="${PROJECT_ROOT}/../../../../.."/>
+ </macros>
+ <externalSettings/>
+ <extensions>
+ <extension id="com.ti.ccstudio.binaryparser.CoffParser" point="org.eclipse.cdt.core.BinaryParser"/>
+ <extension id="com.ti.ccstudio.errorparser.CoffErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.LinkErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.AsmErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactExtension="out" artifactName="${ProjName}" buildProperties="" cleanCommand="${CG_CLEAN_CMD}" description="" id="com.ti.ccstudio.buildDefinitions.TMS470.Release.426113604" name="Release" parent="com.ti.ccstudio.buildDefinitions.TMS470.Release" postbuildStep=""${CCE_INSTALL_ROOT}/utils/tiobj2bin/tiobj2bin" "${BuildArtifactFileName}" "${BuildArtifactFileBaseName}.bin" "${CG_TOOL_ROOT}/bin/armofd" "${CG_TOOL_ROOT}/bin/armhex" "${CCE_INSTALL_ROOT}/utils/tiobj2bin/mkhex4bin"">
+ <folderInfo id="com.ti.ccstudio.buildDefinitions.TMS470.Release.426113604." name="/" resourcePath="">
+ <toolChain id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.ReleaseToolchain.1923039299" name="TI Build Tools" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.ReleaseToolchain" targetTool="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease.425595943">
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS.950838479" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS" valueType="stringList">
+ <listOptionValue builtIn="false" value="DEVICE_CONFIGURATION_ID=Cortex M.TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="DEVICE_ENDIANNESS=little"/>
+ <listOptionValue builtIn="false" value="OUTPUT_FORMAT=ELF"/>
+ <listOptionValue builtIn="false" value="CCS_MBS_VERSION=5.1.0.01"/>
+ <listOptionValue builtIn="false" value="RUNTIME_SUPPORT_LIBRARY=libc.a"/>
+ <listOptionValue builtIn="false" value="OUTPUT_TYPE=executable"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION.395014793" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION" value="5.0.4" valueType="string"/>
+ <targetPlatform id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformRelease.2042811897" name="Platform" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformRelease"/>
+ <builder buildPath="${BuildDirectory}" id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderRelease.230472670" name="GNU Make.Release" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderRelease"/>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerRelease.1470210851" name="ARM Compiler" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerRelease">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.1484055466" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.7M4" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.1488882489" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.1430339390" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.eabi" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.1694957529" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.FPv4SPD16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING.576715524" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING" valueType="stringList">
+ <listOptionValue builtIn="false" value="225"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER.1705401338" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.863856088" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH.607778213" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH" valueType="includePath">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/examples/boards/ek-tm4c123gxl""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/third_party""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/third_party/FreeRTOS/Source/include""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/third_party/FreeRTOS""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/third_party/FreeRTOS/Source/portable/CCS/ARM_CM4F""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN.1166351407" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.1212790883" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.on" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC.359201800" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL.1943359893" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE.2100522510" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE" valueType="definedSymbols">
+ <listOptionValue builtIn="false" value="ccs="ccs""/>
+ <listOptionValue builtIn="false" value="PART_TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="TARGET_IS_TM4C123_RB1"/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS.1510386476" name="C Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS.21851466" name="C++ Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS.2072861889" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS.1181357314" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS"/>
+ </tool>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease.425595943" name="ARM Linker" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE.2128712206" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE" value=""freertos_demo_ccs.map"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE.2058326069" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE" value="512" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE.299855146" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE" value="0" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE.1702243416" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE" value=""${ProjName}.out"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO.1467519005" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO" value=""${ProjName}_linkInfo.xml"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER.476381596" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.740264114" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH.455631799" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH" valueType="libPaths">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/lib""/>
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY.743710245" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY" valueType="libs">
+ <listOptionValue builtIn="false" value=""libc.a""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/driverlib/ccs/Debug/driverlib.lib""/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS.618806948" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS.436064979" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS.1447153544" name="Generated Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS"/>
+ </tool>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <project id="freertos_demo.com.ti.ccstudio.buildDefinitions.TMS470.ProjectType.1566807370" name="ARM" projectType="com.ti.ccstudio.buildDefinitions.TMS470.ProjectType"/>
+ </storageModule>
+ <storageModule moduleId="scannerConfiguration"/>
+ <storageModule moduleId="org.eclipse.cdt.core.language.mapping">
+ <project-mappings>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.asmSource" language="com.ti.ccstudio.core.TIASMLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cHeader" language="com.ti.ccstudio.core.TIGCCLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cSource" language="com.ti.ccstudio.core.TIGCCLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cxxHeader" language="com.ti.ccstudio.core.TIGPPLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cxxSource" language="com.ti.ccstudio.core.TIGPPLanguage"/>
+ </project-mappings>
+ </storageModule>
+</cproject>
diff --git a/boards/ek-tm4c123gxl/freertos_demo/ccs/.project b/boards/ek-tm4c123gxl/freertos_demo/ccs/.project new file mode 100644 index 0000000..db7b286 --- /dev/null +++ b/boards/ek-tm4c123gxl/freertos_demo/ccs/.project @@ -0,0 +1,110 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+ <name>freertos_demo</name>
+ <comment></comment>
+ <projects>
+ </projects>
+ <buildSpec>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+ <triggers>full,incremental,</triggers>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ </buildSpec>
+ <natures>
+ <nature>com.ti.ccstudio.core.ccsNature</nature>
+ <nature>org.eclipse.cdt.core.cnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+ <nature>org.eclipse.cdt.core.ccnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+ </natures>
+ <linkedResources>
+ <link>
+ <name>freertos_demo.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/freertos_demo/freertos_demo.c</locationURI>
+ </link>
+ <link>
+ <name>freertos_demo_ccs.cmd</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/freertos_demo/freertos_demo_ccs.cmd</locationURI>
+ </link>
+ <link>
+ <name>led_task.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/freertos_demo/led_task.c</locationURI>
+ </link>
+ <link>
+ <name>startup_ccs.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/freertos_demo/startup_ccs.c</locationURI>
+ </link>
+ <link>
+ <name>switch_task.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/freertos_demo/switch_task.c</locationURI>
+ </link>
+ <link>
+ <name>drivers/buttons.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/drivers/buttons.c</locationURI>
+ </link>
+ <link>
+ <name>drivers/rgb.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/drivers/rgb.c</locationURI>
+ </link>
+ <link>
+ <name>utils/uartstdio.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/utils/uartstdio.c</locationURI>
+ </link>
+ <link>
+ <name>utils/ustdlib.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/utils/ustdlib.c</locationURI>
+ </link>
+ <link>
+ <name>third_party/FreeRTOS/Source/list.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/third_party/FreeRTOS/Source/list.c</locationURI>
+ </link>
+ <link>
+ <name>third_party/FreeRTOS/Source/queue.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/third_party/FreeRTOS/Source/queue.c</locationURI>
+ </link>
+ <link>
+ <name>third_party/FreeRTOS/Source/tasks.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/third_party/FreeRTOS/Source/tasks.c</locationURI>
+ </link>
+ <link>
+ <name>third_party/FreeRTOS/Source/portable/MemMang/heap_2.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/third_party/FreeRTOS/Source/portable/MemMang/heap_2.c</locationURI>
+ </link>
+ <link>
+ <name>third_party/FreeRTOS/Source/portable/CCS/ARM_CM4F/port.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/third_party/FreeRTOS/Source/portable/CCS/ARM_CM4F/port.c</locationURI>
+ </link>
+ <link>
+ <name>third_party/FreeRTOS/Source/portable/CCS/ARM_CM4F/portasm.asm</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/third_party/FreeRTOS/Source/portable/CCS/ARM_CM4F/portasm.asm</locationURI>
+ </link>
+ </linkedResources>
+ <variableList>
+ <variable>
+ <name>SW_ROOT</name>
+ <value>$%7BPARENT-5-PROJECT_LOC%7D</value>
+ </variable>
+ </variableList>
+</projectDescription>
diff --git a/boards/ek-tm4c123gxl/freertos_demo/ccs/.settings/org.eclipse.cdt.codan.core.prefs b/boards/ek-tm4c123gxl/freertos_demo/ccs/.settings/org.eclipse.cdt.codan.core.prefs new file mode 100644 index 0000000..98b6350 --- /dev/null +++ b/boards/ek-tm4c123gxl/freertos_demo/ccs/.settings/org.eclipse.cdt.codan.core.prefs @@ -0,0 +1,3 @@ +eclipse.preferences.version=1
+inEditor=false
+onBuild=false
diff --git a/boards/ek-tm4c123gxl/freertos_demo/ccs/Debug/freertos_demo.bin b/boards/ek-tm4c123gxl/freertos_demo/ccs/Debug/freertos_demo.bin Binary files differnew file mode 100644 index 0000000..d6451e1 --- /dev/null +++ b/boards/ek-tm4c123gxl/freertos_demo/ccs/Debug/freertos_demo.bin diff --git a/boards/ek-tm4c123gxl/freertos_demo/ccs/Debug/freertos_demo.out b/boards/ek-tm4c123gxl/freertos_demo/ccs/Debug/freertos_demo.out Binary files differnew file mode 100644 index 0000000..f573a2d --- /dev/null +++ b/boards/ek-tm4c123gxl/freertos_demo/ccs/Debug/freertos_demo.out diff --git a/boards/ek-tm4c123gxl/freertos_demo/ccs/macros.ini_initial b/boards/ek-tm4c123gxl/freertos_demo/ccs/macros.ini_initial new file mode 100644 index 0000000..31214b5 --- /dev/null +++ b/boards/ek-tm4c123gxl/freertos_demo/ccs/macros.ini_initial @@ -0,0 +1 @@ +SW_ROOT = ../../../../..
diff --git a/boards/ek-tm4c123gxl/freertos_demo/ccs/target_config.ccxml b/boards/ek-tm4c123gxl/freertos_demo/ccs/target_config.ccxml new file mode 100644 index 0000000..be4342a --- /dev/null +++ b/boards/ek-tm4c123gxl/freertos_demo/ccs/target_config.ccxml @@ -0,0 +1,13 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<configurations XML_version="1.2" id="configurations_0">
+ <configuration XML_version="1.2" id="Stellaris In-Circuit Debug Interface_0">
+ <instance XML_version="1.2" desc="Stellaris In-Circuit Debug Interface_0" href="connections/Stellaris_ICDI_Connection.xml" id="Stellaris In-Circuit Debug Interface_0" xml="Stellaris_ICDI_Connection.xml" xmlpath="connections"/>
+ <connection XML_version="1.2" id="Stellaris In-Circuit Debug Interface_0">
+ <instance XML_version="1.2" href="drivers/stellaris_cs_dap.xml" id="drivers" xml="stellaris_cs_dap.xml" xmlpath="drivers"/>
+ <instance XML_version="1.2" href="drivers/stellaris_cortex_m4.xml" id="drivers" xml="stellaris_cortex_m4.xml" xmlpath="drivers"/>
+ <platform XML_version="1.2" id="platform_0">
+ <instance XML_version="1.2" desc="Stellaris TM4C123GH6PM_0" href="devices/tm4c123gh6pm.xml" id="Stellaris TM4C123GH6PM_0" xml="tm4c123gh6pm.xml" xmlpath="devices"/>
+ </platform>
+ </connection>
+ </configuration>
+</configurations>
diff --git a/boards/ek-tm4c123gxl/freertos_demo/ewarm/Exe/freertos_demo.bin b/boards/ek-tm4c123gxl/freertos_demo/ewarm/Exe/freertos_demo.bin Binary files differnew file mode 100644 index 0000000..efe2391 --- /dev/null +++ b/boards/ek-tm4c123gxl/freertos_demo/ewarm/Exe/freertos_demo.bin diff --git a/boards/ek-tm4c123gxl/freertos_demo/ewarm/Exe/freertos_demo.out b/boards/ek-tm4c123gxl/freertos_demo/ewarm/Exe/freertos_demo.out Binary files differnew file mode 100644 index 0000000..f31c765 --- /dev/null +++ b/boards/ek-tm4c123gxl/freertos_demo/ewarm/Exe/freertos_demo.out diff --git a/boards/ek-tm4c123gxl/freertos_demo/freertos_demo.c b/boards/ek-tm4c123gxl/freertos_demo/freertos_demo.c new file mode 100644 index 0000000..acfc793 --- /dev/null +++ b/boards/ek-tm4c123gxl/freertos_demo/freertos_demo.c @@ -0,0 +1,218 @@ +//*****************************************************************************
+//
+// freertos_demo.c - Simple FreeRTOS example.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdbool.h>
+#include <stdint.h>
+#include "inc/hw_memmap.h"
+#include "inc/hw_types.h"
+#include "driverlib/gpio.h"
+#include "driverlib/pin_map.h"
+#include "driverlib/rom.h"
+#include "driverlib/sysctl.h"
+#include "driverlib/uart.h"
+#include "utils/uartstdio.h"
+#include "led_task.h"
+#include "switch_task.h"
+#include "FreeRTOS.h"
+#include "task.h"
+#include "queue.h"
+#include "semphr.h"
+
+//*****************************************************************************
+//
+//! \addtogroup example_list
+//! <h1>FreeRTOS Example (freertos_demo)</h1>
+//!
+//! This application demonstrates the use of FreeRTOS on Launchpad.
+//!
+//! The application blinks the user-selected LED at a user-selected frequency.
+//! To select the LED press the left button and to select the frequency press
+//! the right button. The UART outputs the application status at 115,200 baud,
+//! 8-n-1 mode.
+//!
+//! This application utilizes FreeRTOS to perform the tasks in a concurrent
+//! fashion. The following tasks are created:
+//!
+//! - An LED task, which blinks the user-selected on-board LED at a
+//! user-selected rate (changed via the buttons).
+//!
+//! - A Switch task, which monitors the buttons pressed and passes the
+//! information to LED task.
+//!
+//! In addition to the tasks, this application also uses the following FreeRTOS
+//! resources:
+//!
+//! - A Queue to enable information transfer between tasks.
+//!
+//! - A Semaphore to guard the resource, UART, from access by multiple tasks at
+//! the same time.
+//!
+//! - A non-blocking FreeRTOS Delay to put the tasks in blocked state when they
+//! have nothing to do.
+//!
+//! For additional details on FreeRTOS, refer to the FreeRTOS web page at:
+//! http://www.freertos.org/
+//
+//*****************************************************************************
+
+
+//*****************************************************************************
+//
+// The mutex that protects concurrent access of UART from multiple tasks.
+//
+//*****************************************************************************
+xSemaphoreHandle g_pUARTSemaphore;
+
+//*****************************************************************************
+//
+// The error routine that is called if the driver library encounters an error.
+//
+//*****************************************************************************
+#ifdef DEBUG
+void
+__error__(char *pcFilename, uint32_t ui32Line)
+{
+}
+
+#endif
+
+//*****************************************************************************
+//
+// This hook is called by FreeRTOS when an stack overflow error is detected.
+//
+//*****************************************************************************
+void
+vApplicationStackOverflowHook(xTaskHandle *pxTask, char *pcTaskName)
+{
+ //
+ // This function can not return, so loop forever. Interrupts are disabled
+ // on entry to this function, so no processor interrupts will interrupt
+ // this loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// Configure the UART and its pins. This must be called before UARTprintf().
+//
+//*****************************************************************************
+void
+ConfigureUART(void)
+{
+ //
+ // Enable the GPIO Peripheral used by the UART.
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOA);
+
+ //
+ // Enable UART0
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_UART0);
+
+ //
+ // Configure GPIO Pins for UART mode.
+ //
+ ROM_GPIOPinConfigure(GPIO_PA0_U0RX);
+ ROM_GPIOPinConfigure(GPIO_PA1_U0TX);
+ ROM_GPIOPinTypeUART(GPIO_PORTA_BASE, GPIO_PIN_0 | GPIO_PIN_1);
+
+ //
+ // Use the internal 16MHz oscillator as the UART clock source.
+ //
+ UARTClockSourceSet(UART0_BASE, UART_CLOCK_PIOSC);
+
+ //
+ // Initialize the UART for console I/O.
+ //
+ UARTStdioConfig(0, 115200, 16000000);
+}
+
+//*****************************************************************************
+//
+// Initialize FreeRTOS and start the initial set of tasks.
+//
+//*****************************************************************************
+int
+main(void)
+{
+ //
+ // Set the clocking to run at 50 MHz from the PLL.
+ //
+ ROM_SysCtlClockSet(SYSCTL_SYSDIV_4 | SYSCTL_USE_PLL | SYSCTL_XTAL_16MHZ |
+ SYSCTL_OSC_MAIN);
+
+ //
+ // Initialize the UART and configure it for 115,200, 8-N-1 operation.
+ //
+ ConfigureUART();
+
+ //
+ // Print demo introduction.
+ //
+ UARTprintf("\n\nWelcome to the EK-TM4C123GXL FreeRTOS Demo!\n");
+
+ //
+ // Create a mutex to guard the UART.
+ //
+ g_pUARTSemaphore = xSemaphoreCreateMutex();
+
+ //
+ // Create the LED task.
+ //
+ if(LEDTaskInit() != 0)
+ {
+
+ while(1)
+ {
+ }
+ }
+
+ //
+ // Create the switch task.
+ //
+ if(SwitchTaskInit() != 0)
+ {
+
+ while(1)
+ {
+ }
+ }
+
+ //
+ // Start the scheduler. This should not return.
+ //
+ vTaskStartScheduler();
+
+ //
+ // In case the scheduler returns for some reason, print an error and loop
+ // forever.
+ //
+
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/freertos_demo/freertos_demo.ewd b/boards/ek-tm4c123gxl/freertos_demo/freertos_demo.ewd new file mode 100644 index 0000000..7a32408 --- /dev/null +++ b/boards/ek-tm4c123gxl/freertos_demo/freertos_demo.ewd @@ -0,0 +1,614 @@ +<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+ <fileVersion>1</fileVersion>
+ <configuration>
+ <name>Debug</name>
+ <toolchain>
+ <name>ARM</name>
+ </toolchain>
+ <debug>1</debug>
+ <settings>
+ <name>C-SPY</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>15</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CInput</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CEndian</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCVariant</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>MemOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MemFile</name>
+ <state>$TOOLKIT_DIR$\CONFIG\debugger\TexasInstruments\tm4c123gh6pm</state>
+ </option>
+ <option>
+ <name>RunToEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>RunToName</name>
+ <state>main</state>
+ </option>
+ <option>
+ <name>CExtraOptionsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCDDFArgumentProducer</name>
+ <state></state>
+ </option>
+ <option>
+ <name>OCDownloadSuppressDownload</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDownloadVerifyAll</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OCDynDriverList</name>
+ <state>LMIFTDI_ID</state>
+ </option>
+ <option>
+ <name>OCLastSavedByProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OCDownloadAttachToProgram</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FlashLoaders</name>
+ <state>,,,,(default),</state>
+ </option>
+ <option>
+ <name>UseFlashLoader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CLowLevel</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCBE8Slave</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ARMSIM_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCSimDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCSimEnablePSP</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCSimPspOverrideConfig</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCSimPspConfigFile</name>
+ <state></state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ANGEL_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CCAngelHeartbeat</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CAngelCommunication</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CAngelCommBaud</name>
+ <version>0</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>CAngelCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ANGELTCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoAngelLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AngelLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>GDBSERVER_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>TCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>LogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCJTagBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>IARROM_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CRomLogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomLogFileEditB</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CRomCommunication</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomCommBaud</name>
+ <version>0</version>
+ <state>7</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>JLINK_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>9</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>JLinkSpeed</name>
+ <state>32</state>
+ </option>
+ <option>
+ <name>CCJLinkDoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCJLinkHWResetDelay</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>JLinkInitialSpeed</name>
+ <state>32</state>
+ </option>
+ <option>
+ <name>CCDoJlinkMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCScanChainNonARMDevices</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkIRLength</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkCommRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkTCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>CCJLinkSpeedRadioV2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCUSBDevice</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchUndef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchSWI</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchData</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchPrefetch</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchIRQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchFIQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ <option>
+ <name>CCJLinkInterfaceRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCJLinkAttachSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCJLinkResetList</name>
+ <version>0</version>
+ <state>5</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>LMIFTDI_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>LmiftdiSpeed</name>
+ <state>500</state>
+ </option>
+ <option>
+ <name>CCLmiftdiDoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCLmiftdiLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>MACRAIGOR_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>2</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>jtag</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>EmuSpeed</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>TCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>LogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>DoEmuMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>EmuMultiTarget</name>
+ <state>0@ARM7TDMI</state>
+ </option>
+ <option>
+ <name>EmuHWReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CEmuCommBaud</name>
+ <version>0</version>
+ <state>4</state>
+ </option>
+ <option>
+ <name>CEmuCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>jtago</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>UnusedAddr</name>
+ <state>0x00800000</state>
+ </option>
+ <option>
+ <name>CCMacraigorHWResetDelay</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCJTagBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>RDI_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CRDIDriverDll</name>
+ <state>Browse to your RDI driver</state>
+ </option>
+ <option>
+ <name>CRDILogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRDILogFileEdit</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCRDIHWReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchUndef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchSWI</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchData</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchPrefetch</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchIRQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchFIQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDIUseETM</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>THIRDPARTY_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CThirdPartyDriverDll</name>
+ <state>Browse to your third-party driver</state>
+ </option>
+ <option>
+ <name>CThirdPartyLogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CThirdPartyLogFileEditB</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <debuggerPlugins>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\OSE\OseEpsilonPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Profiling\Profiling.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ </debuggerPlugins>
+ </configuration>
+</project>
diff --git a/boards/ek-tm4c123gxl/freertos_demo/freertos_demo.ewp b/boards/ek-tm4c123gxl/freertos_demo/freertos_demo.ewp new file mode 100644 index 0000000..46382e1 --- /dev/null +++ b/boards/ek-tm4c123gxl/freertos_demo/freertos_demo.ewp @@ -0,0 +1,832 @@ +<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+ <fileVersion>1</fileVersion>
+ <configuration>
+ <name>Debug</name>
+ <toolchain>
+ <name>ARM</name>
+ </toolchain>
+ <debug>1</debug>
+ <settings>
+ <name>General</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <version>14</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>ExePath</name>
+ <state>ewarm\Exe</state>
+ </option>
+ <option>
+ <name>ObjPath</name>
+ <state>ewarm\Obj</state>
+ </option>
+ <option>
+ <name>ListPath</name>
+ <state>ewarm\List</state>
+ </option>
+ <option>
+ <name>Variant</name>
+ <version>19</version>
+ <state>39</state>
+ </option>
+ <option>
+ <name>GEndianMode</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>Input variant</name>
+ <version>1</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>Input description</name>
+ <state>No specifier n, no float nor long long, no scan set, no assignment suppressing.</state>
+ </option>
+ <option>
+ <name>Output variant</name>
+ <version>0</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>Output description</name>
+ <state>No specifier a, A, no specifier n, no float nor long long, no flags.</state>
+ </option>
+ <option>
+ <name>GOutputBinary</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FPU</name>
+ <version>2</version>
+ <state>5</state>
+ </option>
+ <option>
+ <name>OGCoreOrChip</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelect</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelectSlave</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>RTDescription</name>
+ <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+ </option>
+ <option>
+ <name>RTConfigPath</name>
+ <state>$TOOLKIT_DIR$\INC\DLib_Config_Normal.h</state>
+ </option>
+ <option>
+ <name>OGProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OGLastSavedByProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>GeneralMisraRules</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>GeneralEnableMisra</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GeneralMisraVerbose</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGChipSelectEditMenu</name>
+ <state>TM4C123GH6PM TexasInstruments TM4C123GH6PM</state>
+ </option>
+ <option>
+ <name>GenLowLevelInterface</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GEndianModeBE</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OGBufferedTerminalOutput</name>
+ <state>0</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ICCARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>19</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CCDefines</name>
+ <state>ewarm</state>
+ <state>PART_TM4C123GH6PM</state>
+ <state>TARGET_IS_TM4C123_RB1</state>
+ </option>
+ <option>
+ <name>CCPreprocFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocComments</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMnemonics</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMessages</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssSource</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagSuppress</name>
+ <state>Pa050</state>
+ </option>
+ <option>
+ <name>CCDiagRemark</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCDiagWarning</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCDiagError</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCAllowList</name>
+ <version>1</version>
+ <state>1111111</state>
+ </option>
+ <option>
+ <name>CCDebugInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IEndianMode</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IExtraOptionsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCLangConformance</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCSignedPlainChar</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCRequirePrototypes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagWarnAreErr</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCCompilerRuntimeInfo</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OutputFile</name>
+ <state>$FILE_BNAME$.o</state>
+ </option>
+ <option>
+ <name>CCLangSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCLibConfigHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>PreInclude</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CompilerMisraRules</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>CompilerMisraOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCIncludePath2</name>
+ <state>$PROJ_DIR$\.</state>
+ <state>$PROJ_DIR$\..</state>
+ <state>$PROJ_DIR$\..\..\..\..</state>
+ <state>$PROJ_DIR$\..\..\..\..\third_party\FreeRTOS\Source\portable\IAR\ARM_CM4F</state>
+ <state>$PROJ_DIR$\..\..\..\..\third_party\FreeRTOS</state>
+ <state>$PROJ_DIR$\..\..\..\..\third_party\FreeRTOS\Source\include</state>
+ <state>$PROJ_DIR$\..\..\..\..\third_party</state>
+ </option>
+ <option>
+ <name>CCStdIncCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCStdIncludePath</name>
+ <state>$TOOLKIT_DIR$\INC\</state>
+ </option>
+ <option>
+ <name>CCCodeSection</name>
+ <state>.text</state>
+ </option>
+ <option>
+ <name>IInterwork2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IProcessorMode2</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptLevel</name>
+ <state>3</state>
+ </option>
+ <option>
+ <name>CCOptStrategy</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptLevelSlave</name>
+ <state>3</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>AARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>7</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>AObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AEndian</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>ACaseSensitivity</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacroChars</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnEnable</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnWhat</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnOne</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AWarnRange1</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AWarnRange2</name>
+ <state></state>
+ </option>
+ <option>
+ <name>ADebug</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AltRegisterNames</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ADefines</name>
+ <state>ewarm</state>
+ </option>
+ <option>
+ <name>AList</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AListHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AListing</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>Includes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacDefs</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacExps</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacExec</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OnlyAssed</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MultiLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLengthCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLength</name>
+ <state>80</state>
+ </option>
+ <option>
+ <name>TabSpacing</name>
+ <state>8</state>
+ </option>
+ <option>
+ <name>AXRef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDefines</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefInternal</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDual</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AOutputFile</name>
+ <state>$FILE_BNAME$.o</state>
+ </option>
+ <option>
+ <name>AMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ALimitErrorsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ALimitErrorsEdit</name>
+ <state>100</state>
+ </option>
+ <option>
+ <name>AIgnoreStdInclude</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AStdIncludes</name>
+ <state>$TOOLKIT_DIR$\INC\</state>
+ </option>
+ <option>
+ <name>AUserIncludes</name>
+ <state>$PROJ_DIR$\.</state>
+ <state>$PROJ_DIR$\..</state>
+ <state>$PROJ_DIR$\..\..\..\..</state>
+ <state>$PROJ_DIR$\..\..\..\..\third_party\FreeRTOS\Source\portable\IAR\ARM_CM4F</state>
+ <state>$PROJ_DIR$\..\..\..\..\third_party\FreeRTOS</state>
+ <state>$PROJ_DIR$\..\..\..\..\third_party\FreeRTOS\Source\include</state>
+ <state>$PROJ_DIR$\..\..\..\..\third_party</state>
+ </option>
+ <option>
+ <name>AExtraOptionsCheckV2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AExtraOptionsV2</name>
+ <state></state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>OBJCOPY</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OOCOutputFormat</name>
+ <version>1</version>
+ <state>2</state>
+ </option>
+ <option>
+ <name>OCOutputOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OOCOutputFile</name>
+ <state>freertos_demo.bin</state>
+ </option>
+ <option>
+ <name>OOCCommandLineProducer</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OOCObjCopyEnable</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>CUSTOM</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <extensions></extensions>
+ <cmdline></cmdline>
+ </data>
+ </settings>
+ <settings>
+ <name>BICOMP</name>
+ <archiveVersion>0</archiveVersion>
+ <data/>
+ </settings>
+ <settings>
+ <name>BUILDACTION</name>
+ <archiveVersion>1</archiveVersion>
+ <data>
+ <prebuild></prebuild>
+ <postbuild></postbuild>
+ </data>
+ </settings>
+ <settings>
+ <name>ILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>5</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>IlinkLibIOConfig</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>XLinkMisraHandler</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkInputFileSlave</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkOutputFile</name>
+ <state>freertos_demo.out</state>
+ </option>
+ <option>
+ <name>IlinkDebugInfoEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkKeepSymbols</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinaryFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinarySymbol</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinarySegment</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinaryAlign</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkDefines</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkConfigDefines</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkMapFile</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkLogFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogInitialization</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogModule</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogSection</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogVeneer</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkIcfOverride</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkIcfFile</name>
+ <state>$PROJ_DIR$\freertos_demo.icf</state>
+ </option>
+ <option>
+ <name>IlinkIcfFileSlave</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkSuppressDiags</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsRem</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsWarn</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsErr</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkWarningsAreErrors</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkUseExtraOptions</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkLowLevelInterfaceSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAutoLibEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAdditionalLibs</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkOverrideProgramEntryLabel</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabelSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabel</name>
+ <state>__iar_program_start</state>
+ </option>
+ <option>
+ <name>IlinkNXPLPCChecksum</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>DoFill</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FillerByte</name>
+ <state>0xFF</state>
+ </option>
+ <option>
+ <name>FillerStart</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>FillerEnd</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>CrcSize</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcAlign</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcAlgo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcPoly</name>
+ <state>0x11021</state>
+ </option>
+ <option>
+ <name>CrcCompl</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcBitOrder</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcInitialValue</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>DoCrc</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkBE8Slave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkBufferedTerminalOutput</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>IARCHIVE</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>IarchiveInputs</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IarchiveOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IarchiveOutput</name>
+ <state>###Unitialized###</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>BILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data/>
+ </settings>
+ </configuration>
+ <group>
+ <name>Libraries</name>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\driverlib\ewarm\Exe\driverlib.a</name>
+ </file>
+ </group>
+ <group>
+ <name>Source</name>
+ <file>
+ <name>$PROJ_DIR$\..\drivers\buttons.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\freertos_demo.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\third_party\FreeRTOS\Source\portable\MemMang\heap_2.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\led_task.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\third_party\FreeRTOS\Source\list.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\third_party\FreeRTOS\Source\portable\IAR\ARM_CM4F\port.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\third_party\FreeRTOS\Source\portable\IAR\ARM_CM4F\portasm.S</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\third_party\FreeRTOS\Source\queue.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\drivers\rgb.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\startup_ewarm.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\switch_task.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\third_party\FreeRTOS\Source\tasks.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\utils\uartstdio.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\utils\ustdlib.c</name>
+ </file>
+ </group>
+</project>
diff --git a/boards/ek-tm4c123gxl/freertos_demo/freertos_demo.icf b/boards/ek-tm4c123gxl/freertos_demo/freertos_demo.icf new file mode 100644 index 0000000..59de3bd --- /dev/null +++ b/boards/ek-tm4c123gxl/freertos_demo/freertos_demo.icf @@ -0,0 +1,78 @@ +//*****************************************************************************
+//
+// freertos_demo.icf - Linker configuration file for freertos_demo.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+//
+// Define a memory region that covers the entire 4 GB addressible space of the
+// processor.
+//
+define memory mem with size = 4G;
+
+//
+// Define a region for the on-chip flash.
+//
+define region FLASH = mem:[from 0x00000000 to 0x0003ffff];
+
+//
+// Define a region for the on-chip SRAM.
+//
+define region SRAM = mem:[from 0x20000000 to 0x20007fff];
+
+//
+// Define a block for the heap. The size should be set to something other
+// than zero if things in the C library that require the heap are used.
+//
+define block HEAP with alignment = 8, size = 0x00000000 { };
+
+//
+// Indicate that the read/write values should be initialized by copying from
+// flash.
+//
+initialize by copy { readwrite };
+
+//
+// Indicate that the noinit values should be left alone. This includes the
+// stack, which if initialized will destroy the return address from the
+// initialization code, causing the processor to branch to zero and fault.
+//
+do not initialize { section .noinit };
+
+//
+// Place the interrupt vectors at the start of flash.
+//
+place at start of FLASH { readonly section .intvec };
+
+//
+// Place the remainder of the read-only items into flash.
+//
+place in FLASH { readonly };
+
+//
+// Place the RAM vector table at the start of SRAM.
+//
+place at start of SRAM { section VTABLE };
+
+//
+// Place all read/write items into SRAM.
+//
+place in SRAM { readwrite, block HEAP };
diff --git a/boards/ek-tm4c123gxl/freertos_demo/freertos_demo.ld b/boards/ek-tm4c123gxl/freertos_demo/freertos_demo.ld new file mode 100644 index 0000000..a7b6717 --- /dev/null +++ b/boards/ek-tm4c123gxl/freertos_demo/freertos_demo.ld @@ -0,0 +1,57 @@ +/******************************************************************************
+ *
+ * freertos_demo.ld - Linker configuration file for freertos_demo.
+ *
+ * Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+ * Software License Agreement
+ *
+ * Texas Instruments (TI) is supplying this software for use solely and
+ * exclusively on TI's microcontroller products. The software is owned by
+ * TI and/or its suppliers, and is protected under applicable copyright
+ * laws. You may not combine this software with "viral" open-source
+ * software in order to form a larger program.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+ * NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+ * NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+ * CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+ * DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ * This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+ *
+ *****************************************************************************/
+
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x00040000
+ SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000
+}
+
+SECTIONS
+{
+ .text :
+ {
+ _text = .;
+ KEEP(*(.isr_vector))
+ *(.text*)
+ *(.rodata*)
+ _etext = .;
+ } > FLASH
+
+ .data : AT(ADDR(.text) + SIZEOF(.text))
+ {
+ _data = .;
+ *(vtable)
+ *(.data*)
+ _edata = .;
+ } > SRAM
+
+ .bss :
+ {
+ _bss = .;
+ *(.bss*)
+ *(COMMON)
+ _ebss = .;
+ } > SRAM
+}
diff --git a/boards/ek-tm4c123gxl/freertos_demo/freertos_demo.sct b/boards/ek-tm4c123gxl/freertos_demo/freertos_demo.sct new file mode 100644 index 0000000..746dc51 --- /dev/null +++ b/boards/ek-tm4c123gxl/freertos_demo/freertos_demo.sct @@ -0,0 +1,47 @@ +;******************************************************************************
+;
+; freertos_demo.sct - Linker configuration file for freertos_demo.
+;
+; Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+; Software License Agreement
+;
+; Texas Instruments (TI) is supplying this software for use solely and
+; exclusively on TI's microcontroller products. The software is owned by
+; TI and/or its suppliers, and is protected under applicable copyright
+; laws. You may not combine this software with "viral" open-source
+; software in order to form a larger program.
+;
+; THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+; NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+; NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+; A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+; CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+; DAMAGES, FOR ANY REASON WHATSOEVER.
+;
+; This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+;
+;******************************************************************************
+
+LR_IROM 0x00000000 0x00040000
+{
+ ;
+ ; Specify the Execution Address of the code and the size.
+ ;
+ ER_IROM 0x00000000 0x00040000
+ {
+ *.o (RESET, +First)
+ * (InRoot$$Sections, +RO)
+ }
+
+ ;
+ ; Specify the Execution Address of the data area.
+ ;
+ RW_IRAM 0x20000000 0x00008000
+ {
+ ;
+ ; Uncomment the following line in order to use IntRegister().
+ ;
+ ;* (vtable, +First)
+ * (+RW, +ZI)
+ }
+}
diff --git a/boards/ek-tm4c123gxl/freertos_demo/freertos_demo.uvopt b/boards/ek-tm4c123gxl/freertos_demo/freertos_demo.uvopt new file mode 100644 index 0000000..1256086 --- /dev/null +++ b/boards/ek-tm4c123gxl/freertos_demo/freertos_demo.uvopt @@ -0,0 +1,443 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+ <SchemaVersion>1.0</SchemaVersion>
+
+ <Header>### uVision Project, (C) Keil Software</Header>
+
+ <Extensions>
+ <cExt>*.c</cExt>
+ <aExt>*.s*; *.src; *.a*</aExt>
+ <oExt>*.obj</oExt>
+ <lExt>*.lib</lExt>
+ <tExt>*.txt; *.h; *.inc</tExt>
+ <pExt>*.plm</pExt>
+ <CppX>*.cpp</CppX>
+ </Extensions>
+
+ <DaveTm>
+ <dwLowDateTime>0</dwLowDateTime>
+ <dwHighDateTime>0</dwHighDateTime>
+ </DaveTm>
+
+ <Target>
+ <TargetName>freertos_demo</TargetName>
+ <ToolsetNumber>0x4</ToolsetNumber>
+ <ToolsetName>ARM-ADS</ToolsetName>
+ <TargetOption>
+ <CLKADS>8000000</CLKADS>
+ <OPTTT>
+ <gFlags>1</gFlags>
+ <BeepAtEnd>1</BeepAtEnd>
+ <RunSim>1</RunSim>
+ <RunTarget>0</RunTarget>
+ </OPTTT>
+ <OPTHX>
+ <HexSelection>1</HexSelection>
+ <FlashByte>65535</FlashByte>
+ <HexRangeLowAddress>0</HexRangeLowAddress>
+ <HexRangeHighAddress>0</HexRangeHighAddress>
+ <HexOffset>0</HexOffset>
+ </OPTHX>
+ <OPTLEX>
+ <PageWidth>79</PageWidth>
+ <PageLength>66</PageLength>
+ <TabStop>8</TabStop>
+ <ListingPath>.\rvmdk\</ListingPath>
+ </OPTLEX>
+ <ListingPage>
+ <CreateCListing>1</CreateCListing>
+ <CreateAListing>1</CreateAListing>
+ <CreateLListing>1</CreateLListing>
+ <CreateIListing>0</CreateIListing>
+ <AsmCond>1</AsmCond>
+ <AsmSymb>1</AsmSymb>
+ <AsmXref>0</AsmXref>
+ <CCond>1</CCond>
+ <CCode>0</CCode>
+ <CListInc>0</CListInc>
+ <CSymb>0</CSymb>
+ <LinkerCodeListing>0</LinkerCodeListing>
+ </ListingPage>
+ <OPTXL>
+ <LMap>1</LMap>
+ <LComments>1</LComments>
+ <LGenerateSymbols>1</LGenerateSymbols>
+ <LLibSym>1</LLibSym>
+ <LLines>1</LLines>
+ <LLocSym>1</LLocSym>
+ <LPubSym>1</LPubSym>
+ <LXref>0</LXref>
+ <LExpSel>0</LExpSel>
+ </OPTXL>
+ <OPTFL>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <IsCurrentTarget>1</IsCurrentTarget>
+ </OPTFL>
+ <CpuCode>255</CpuCode>
+ <Books>
+ <Book>
+ <Number>0</Number>
+ <Title>Data Sheet</Title>
+ <Path>DATASHTS\Luminary\TM4C123GH6PM.PDF</Path>
+ </Book>
+ </Books>
+ <DllOpt>
+ <SimDllName>SARMCM3.DLL</SimDllName>
+ <SimDllArguments>-MPU</SimDllArguments>
+ <SimDlgDllName>DCM.DLL</SimDlgDllName>
+ <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+ <TargetDllName>SARMCM3.DLL</TargetDllName>
+ <TargetDllArguments>-MPU</TargetDllArguments>
+ <TargetDlgDllName>TCM.DLL</TargetDlgDllName>
+ <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+ </DllOpt>
+ <DebugOpt>
+ <uSim>0</uSim>
+ <uTrg>1</uTrg>
+ <sLdApp>1</sLdApp>
+ <sGomain>1</sGomain>
+ <sRbreak>1</sRbreak>
+ <sRwatch>1</sRwatch>
+ <sRmem>1</sRmem>
+ <sRfunc>1</sRfunc>
+ <sRbox>1</sRbox>
+ <tLdApp>1</tLdApp>
+ <tGomain>0</tGomain>
+ <tRbreak>1</tRbreak>
+ <tRwatch>1</tRwatch>
+ <tRmem>1</tRmem>
+ <tRfunc>0</tRfunc>
+ <tRbox>1</tRbox>
+ <sRunDeb>0</sRunDeb>
+ <sLrtime>0</sLrtime>
+ <nTsel>4</nTsel>
+ <sDll></sDll>
+ <sDllPa></sDllPa>
+ <sDlgDll></sDlgDll>
+ <sDlgPa></sDlgPa>
+ <sIfile></sIfile>
+ <tDll></tDll>
+ <tDllPa></tDllPa>
+ <tDlgDll></tDlgDll>
+ <tDlgPa></tDlgPa>
+ <tIfile></tIfile>
+ <pMon>BIN\lmidk-agdi.dll</pMon>
+ </DebugOpt>
+ <TargetDriverDllRegistry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>lmidk-agdi</Key>
+ <Name>-O4614 -S3 -FO29</Name>
+ </SetRegEntry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>DLGTARM</Key>
+ <Name></Name>
+ </SetRegEntry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>ARMDBGFLAGS</Key>
+ <Name></Name>
+ </SetRegEntry>
+ </TargetDriverDllRegistry>
+ <DebugFlag>
+ <trace>0</trace>
+ <periodic>1</periodic>
+ <aLwin>0</aLwin>
+ <aCover>0</aCover>
+ <aSer1>0</aSer1>
+ <aSer2>0</aSer2>
+ <aPa>0</aPa>
+ <viewmode>1</viewmode>
+ <vrSel>0</vrSel>
+ <aSym>0</aSym>
+ <aTbox>0</aTbox>
+ <AscS1>0</AscS1>
+ <AscS2>0</AscS2>
+ <AscS3>0</AscS3>
+ <aSer3>0</aSer3>
+ <eProf>0</eProf>
+ <aLa>0</aLa>
+ <aPa1>0</aPa1>
+ <AscS4>0</AscS4>
+ <aSer4>0</aSer4>
+ <StkLoc>0</StkLoc>
+ <TrcWin>0</TrcWin>
+ <newCpu>0</newCpu>
+ <uProt>0</uProt>
+ </DebugFlag>
+ <LintExecutable></LintExecutable>
+ <LintConfigFile></LintConfigFile>
+ </TargetOption>
+ </Target>
+
+ <Group>
+ <GroupName>Source</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>1</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\drivers\buttons.c</PathWithFileName>
+ <FilenameWithoutPath>buttons.c</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>2</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\freertos_demo.c</PathWithFileName>
+ <FilenameWithoutPath>freertos_demo.c</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>3</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\third_party\FreeRTOS\Source\portable\MemMang\heap_2.c</PathWithFileName>
+ <FilenameWithoutPath>heap_2.c</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>4</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\led_task.c</PathWithFileName>
+ <FilenameWithoutPath>led_task.c</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>5</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\third_party\FreeRTOS\Source\list.c</PathWithFileName>
+ <FilenameWithoutPath>list.c</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>6</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\third_party\FreeRTOS\Source\portable\RVDS\ARM_CM4F\port.c</PathWithFileName>
+ <FilenameWithoutPath>port.c</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>7</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\third_party\FreeRTOS\Source\queue.c</PathWithFileName>
+ <FilenameWithoutPath>queue.c</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>8</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\drivers\rgb.c</PathWithFileName>
+ <FilenameWithoutPath>rgb.c</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>9</FileNumber>
+ <FileType>2</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\startup_rvmdk.S</PathWithFileName>
+ <FilenameWithoutPath>startup_rvmdk.S</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>10</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\switch_task.c</PathWithFileName>
+ <FilenameWithoutPath>switch_task.c</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>11</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\third_party\FreeRTOS\Source\tasks.c</PathWithFileName>
+ <FilenameWithoutPath>tasks.c</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>12</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\utils\uartstdio.c</PathWithFileName>
+ <FilenameWithoutPath>uartstdio.c</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>13</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\utils\ustdlib.c</PathWithFileName>
+ <FilenameWithoutPath>ustdlib.c</FilenameWithoutPath>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>Libraries</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>14</FileNumber>
+ <FileType>4</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\driverlib\rvmdk\driverlib.lib</PathWithFileName>
+ <FilenameWithoutPath>driverlib.lib</FilenameWithoutPath>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>Documentation</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>3</GroupNumber>
+ <FileNumber>15</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <Focus>1</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>1</TopLine>
+ <CurrentLine>1</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\readme.txt</PathWithFileName>
+ <FilenameWithoutPath>readme.txt</FilenameWithoutPath>
+ <WindowPosition>
+ <length>44</length>
+ <flags>0</flags>
+ <showCmd>1</showCmd>
+ <MinPosition>
+ <xPos>-1</xPos>
+ <yPos>-1</yPos>
+ </MinPosition>
+ <MaxPosition>
+ <xPos>-1</xPos>
+ <yPos>-1</yPos>
+ </MaxPosition>
+ <NormalPosition>
+ <Top>0</Top>
+ <Left>0</Left>
+ <Right>729</Right>
+ <Bottom>300</Bottom>
+ </NormalPosition>
+ </WindowPosition>
+ </File>
+ </Group>
+
+ <MDIGroups>
+ <Orientation>1</Orientation>
+ <ActiveMDIGroup>0</ActiveMDIGroup>
+ <MDIGroup>
+ <Size>100</Size>
+ <ActiveTab>0</ActiveTab>
+ <Documents>
+ <Doc>
+ <Name>.\readme.txt</Name>
+ <ColumnNumber>0</ColumnNumber>
+ <TopLine>1</TopLine>
+ <CurrentLine>1</CurrentLine>
+ </Doc>
+ </Documents>
+ </MDIGroup>
+ </MDIGroups>
+
+</ProjectOpt>
diff --git a/boards/ek-tm4c123gxl/freertos_demo/freertos_demo.uvproj b/boards/ek-tm4c123gxl/freertos_demo/freertos_demo.uvproj new file mode 100644 index 0000000..9074a5f --- /dev/null +++ b/boards/ek-tm4c123gxl/freertos_demo/freertos_demo.uvproj @@ -0,0 +1,479 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+ <SchemaVersion>1.1</SchemaVersion>
+
+ <Header>### uVision Project, (C) Keil Software</Header>
+
+ <Targets>
+ <Target>
+ <TargetName>freertos_demo</TargetName>
+ <ToolsetNumber>0x4</ToolsetNumber>
+ <ToolsetName>ARM-ADS</ToolsetName>
+ <TargetOption>
+ <TargetCommonOption>
+ <Device>TM4C123GH6PM</Device>
+ <Vendor>Texas Instruments</Vendor>
+ <Cpu>IRAM(0x20000000-0x20007FFF) IROM(0-0x3FFFF) CLOCK(8000000) CPUTYPE("Cortex-M4") FPU2</Cpu>
+ <FlashUtilSpec></FlashUtilSpec>
+ <StartupFile>"STARTUP\Luminary\Startup.s" ("Luminary Startup Code")</StartupFile>
+ <FlashDriverDll>UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0LM4F_256 -FS00 -FL040000)</FlashDriverDll>
+ <DeviceId>5919</DeviceId>
+ <RegisterFile>LM4Fxxxx.H</RegisterFile>
+ <MemoryEnv></MemoryEnv>
+ <Cmp></Cmp>
+ <Asm></Asm>
+ <Linker></Linker>
+ <OHString></OHString>
+ <InfinionOptionDll></InfinionOptionDll>
+ <SLE66CMisc></SLE66CMisc>
+ <SLE66AMisc></SLE66AMisc>
+ <SLE66LinkerMisc></SLE66LinkerMisc>
+ <UseEnv>0</UseEnv>
+ <BinPath></BinPath>
+ <IncludePath></IncludePath>
+ <LibPath></LibPath>
+ <RegisterFilePath>Luminary\</RegisterFilePath>
+ <DBRegisterFilePath>Luminary\</DBRegisterFilePath>
+ <TargetStatus>
+ <Error>0</Error>
+ <ExitCodeStop>0</ExitCodeStop>
+ <ButtonStop>0</ButtonStop>
+ <NotGenerated>0</NotGenerated>
+ <InvalidFlash>1</InvalidFlash>
+ </TargetStatus>
+ <OutputDirectory>.\rvmdk\</OutputDirectory>
+ <OutputName>freertos_demo</OutputName>
+ <CreateExecutable>1</CreateExecutable>
+ <CreateLib>0</CreateLib>
+ <CreateHexFile>0</CreateHexFile>
+ <DebugInformation>1</DebugInformation>
+ <BrowseInformation>1</BrowseInformation>
+ <ListingPath>.\rvmdk\</ListingPath>
+ <HexFormatSelection>1</HexFormatSelection>
+ <Merge32K>0</Merge32K>
+ <CreateBatchFile>0</CreateBatchFile>
+ <BeforeCompile>
+ <RunUserProg1>0</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name></UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </BeforeCompile>
+ <BeforeMake>
+ <RunUserProg1>0</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name></UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </BeforeMake>
+ <AfterMake>
+ <RunUserProg1>1</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name>fromelf --bin --output .\rvmdk\freertos_demo.bin .\rvmdk\freertos_demo.axf</UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </AfterMake>
+ <SelectedForBatchBuild>0</SelectedForBatchBuild>
+ <SVCSIdString></SVCSIdString>
+ </TargetCommonOption>
+ <CommonProperty>
+ <UseCPPCompiler>0</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <DllOption>
+ <SimDllName>SARMCM3.DLL</SimDllName>
+ <SimDllArguments>-MPU</SimDllArguments>
+ <SimDlgDll>DCM.DLL</SimDlgDll>
+ <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+ <TargetDllName>SARMCM3.DLL</TargetDllName>
+ <TargetDllArguments>-MPU</TargetDllArguments>
+ <TargetDlgDll>TCM.DLL</TargetDlgDll>
+ <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+ </DllOption>
+ <DebugOption>
+ <OPTHX>
+ <HexSelection>1</HexSelection>
+ <HexRangeLowAddress>0</HexRangeLowAddress>
+ <HexRangeHighAddress>0</HexRangeHighAddress>
+ <HexOffset>0</HexOffset>
+ <Oh166RecLen>16</Oh166RecLen>
+ </OPTHX>
+ <Simulator>
+ <UseSimulator>0</UseSimulator>
+ <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+ <RunToMain>1</RunToMain>
+ <RestoreBreakpoints>1</RestoreBreakpoints>
+ <RestoreWatchpoints>1</RestoreWatchpoints>
+ <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+ <RestoreFunctions>1</RestoreFunctions>
+ <RestoreToolbox>1</RestoreToolbox>
+ <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+ </Simulator>
+ <Target>
+ <UseTarget>1</UseTarget>
+ <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+ <RunToMain>0</RunToMain>
+ <RestoreBreakpoints>1</RestoreBreakpoints>
+ <RestoreWatchpoints>1</RestoreWatchpoints>
+ <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+ <RestoreFunctions>0</RestoreFunctions>
+ <RestoreToolbox>1</RestoreToolbox>
+ </Target>
+ <RunDebugAfterBuild>0</RunDebugAfterBuild>
+ <TargetSelection>4</TargetSelection>
+ <SimDlls>
+ <CpuDll></CpuDll>
+ <CpuDllArguments></CpuDllArguments>
+ <PeripheralDll></PeripheralDll>
+ <PeripheralDllArguments></PeripheralDllArguments>
+ <InitializationFile></InitializationFile>
+ </SimDlls>
+ <TargetDlls>
+ <CpuDll></CpuDll>
+ <CpuDllArguments></CpuDllArguments>
+ <PeripheralDll></PeripheralDll>
+ <PeripheralDllArguments></PeripheralDllArguments>
+ <InitializationFile></InitializationFile>
+ <Driver>BIN\lmidk-agdi.dll</Driver>
+ </TargetDlls>
+ </DebugOption>
+ <Utilities>
+ <Flash1>
+ <UseTargetDll>1</UseTargetDll>
+ <UseExternalTool>0</UseExternalTool>
+ <RunIndependent>0</RunIndependent>
+ <UpdateFlashBeforeDebugging>0</UpdateFlashBeforeDebugging>
+ <Capability>1</Capability>
+ <DriverSelection>4099</DriverSelection>
+ </Flash1>
+ <Flash2>BIN\lmidk-agdi.dll</Flash2>
+ <Flash3></Flash3>
+ <Flash4></Flash4>
+ </Utilities>
+ <TargetArmAds>
+ <ArmAdsMisc>
+ <GenerateListings>0</GenerateListings>
+ <asHll>1</asHll>
+ <asAsm>1</asAsm>
+ <asMacX>1</asMacX>
+ <asSyms>1</asSyms>
+ <asFals>1</asFals>
+ <asDbgD>1</asDbgD>
+ <asForm>1</asForm>
+ <ldLst>0</ldLst>
+ <ldmm>1</ldmm>
+ <ldXref>1</ldXref>
+ <BigEnd>0</BigEnd>
+ <AdsALst>0</AdsALst>
+ <AdsACrf>0</AdsACrf>
+ <AdsANop>0</AdsANop>
+ <AdsANot>0</AdsANot>
+ <AdsLLst>1</AdsLLst>
+ <AdsLmap>1</AdsLmap>
+ <AdsLcgr>1</AdsLcgr>
+ <AdsLsym>1</AdsLsym>
+ <AdsLszi>1</AdsLszi>
+ <AdsLtoi>1</AdsLtoi>
+ <AdsLsun>1</AdsLsun>
+ <AdsLven>1</AdsLven>
+ <AdsLsxf>1</AdsLsxf>
+ <RvctClst>0</RvctClst>
+ <GenPPlst>0</GenPPlst>
+ <AdsCpuType>"Cortex-M4"</AdsCpuType>
+ <RvctDeviceName></RvctDeviceName>
+ <mOS>0</mOS>
+ <uocRom>0</uocRom>
+ <uocRam>0</uocRam>
+ <hadIROM>1</hadIROM>
+ <hadIRAM>1</hadIRAM>
+ <hadXRAM>0</hadXRAM>
+ <uocXRam>0</uocXRam>
+ <RvdsVP>2</RvdsVP>
+ <hadIRAM2>0</hadIRAM2>
+ <hadIROM2>0</hadIROM2>
+ <StupSel>8</StupSel>
+ <useUlib>1</useUlib>
+ <EndSel>0</EndSel>
+ <uLtcg>0</uLtcg>
+ <RoSelD>3</RoSelD>
+ <RwSelD>3</RwSelD>
+ <CodeSel>0</CodeSel>
+ <OptFeed>0</OptFeed>
+ <NoZi1>0</NoZi1>
+ <NoZi2>0</NoZi2>
+ <NoZi3>0</NoZi3>
+ <NoZi4>0</NoZi4>
+ <NoZi5>0</NoZi5>
+ <Ro1Chk>0</Ro1Chk>
+ <Ro2Chk>0</Ro2Chk>
+ <Ro3Chk>0</Ro3Chk>
+ <Ir1Chk>1</Ir1Chk>
+ <Ir2Chk>0</Ir2Chk>
+ <Ra1Chk>0</Ra1Chk>
+ <Ra2Chk>0</Ra2Chk>
+ <Ra3Chk>0</Ra3Chk>
+ <Im1Chk>1</Im1Chk>
+ <Im2Chk>0</Im2Chk>
+ <OnChipMemories>
+ <Ocm1>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm1>
+ <Ocm2>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm2>
+ <Ocm3>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm3>
+ <Ocm4>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm4>
+ <Ocm5>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm5>
+ <Ocm6>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm6>
+ <IRAM>
+ <Type>0</Type>
+ <StartAddress>0x20000000</StartAddress>
+ <Size>0x8000</Size>
+ </IRAM>
+ <IROM>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x40000</Size>
+ </IROM>
+ <XRAM>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </XRAM>
+ <OCR_RVCT1>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT1>
+ <OCR_RVCT2>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT2>
+ <OCR_RVCT3>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT3>
+ <OCR_RVCT4>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x40000</Size>
+ </OCR_RVCT4>
+ <OCR_RVCT5>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT5>
+ <OCR_RVCT6>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT6>
+ <OCR_RVCT7>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT7>
+ <OCR_RVCT8>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT8>
+ <OCR_RVCT9>
+ <Type>0</Type>
+ <StartAddress>0x20000000</StartAddress>
+ <Size>0x8000</Size>
+ </OCR_RVCT9>
+ <OCR_RVCT10>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT10>
+ </OnChipMemories>
+ <RvctStartVector></RvctStartVector>
+ </ArmAdsMisc>
+ <Cads>
+ <interw>0</interw>
+ <Optim>3</Optim>
+ <oTime>0</oTime>
+ <SplitLS>0</SplitLS>
+ <OneElfS>1</OneElfS>
+ <Strict>0</Strict>
+ <EnumInt>0</EnumInt>
+ <PlainCh>0</PlainCh>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <wLevel>2</wLevel>
+ <uThumb>0</uThumb>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define>rvmdk PART_TM4C123GH6PM TARGET_IS_TM4C123_RB1</Define>
+ <Undefine></Undefine>
+ <IncludePath>.;..;..\..\..\..;..\..\..\..\third_party\FreeRTOS\Source\portable\RVDS\ARM_CM4F;..\..\..\..\third_party\FreeRTOS;..\..\..\..\third_party\FreeRTOS\Source\include;..\..\..\..\third_party;</IncludePath>
+ </VariousControls>
+ </Cads>
+ <Aads>
+ <interw>1</interw>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <thumb>0</thumb>
+ <SplitLS>0</SplitLS>
+ <SwStkChk>0</SwStkChk>
+ <NoWarn>0</NoWarn>
+ <VariousControls>
+ <MiscControls></MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Aads>
+ <LDads>
+ <umfTarg>0</umfTarg>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <noStLib>0</noStLib>
+ <RepFail>1</RepFail>
+ <useFile>0</useFile>
+ <TextAddressRange>0x00000000</TextAddressRange>
+ <DataAddressRange>0x20000000</DataAddressRange>
+ <ScatterFile>freertos_demo.sct</ScatterFile>
+ <IncludeLibs></IncludeLibs>
+ <IncludeLibsPath></IncludeLibsPath>
+ <Misc>--entry Reset_Handler</Misc>
+ <LinkerInputFile></LinkerInputFile>
+ <DisabledWarnings></DisabledWarnings>
+ </LDads>
+ </TargetArmAds>
+ </TargetOption>
+ <Groups>
+ <Group>
+ <GroupName>Source</GroupName>
+ <Files>
+ <File>
+ <FileName>buttons.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>..\drivers\buttons.c</FilePath>
+ </File>
+ <File>
+ <FileName>freertos_demo.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>.\freertos_demo.c</FilePath>
+ </File>
+ <File>
+ <FileName>heap_2.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>..\..\..\..\third_party\FreeRTOS\Source\portable\MemMang\heap_2.c</FilePath>
+ </File>
+ <File>
+ <FileName>led_task.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>.\led_task.c</FilePath>
+ </File>
+ <File>
+ <FileName>list.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>..\..\..\..\third_party\FreeRTOS\Source\list.c</FilePath>
+ </File>
+ <File>
+ <FileName>port.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>..\..\..\..\third_party\FreeRTOS\Source\portable\RVDS\ARM_CM4F\port.c</FilePath>
+ </File>
+ <File>
+ <FileName>queue.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>..\..\..\..\third_party\FreeRTOS\Source\queue.c</FilePath>
+ </File>
+ <File>
+ <FileName>rgb.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>..\drivers\rgb.c</FilePath>
+ </File>
+ <File>
+ <FileName>startup_rvmdk.S</FileName>
+ <FileType>2</FileType>
+ <FilePath>.\startup_rvmdk.S</FilePath>
+ </File>
+ <File>
+ <FileName>switch_task.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>.\switch_task.c</FilePath>
+ </File>
+ <File>
+ <FileName>tasks.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>..\..\..\..\third_party\FreeRTOS\Source\tasks.c</FilePath>
+ </File>
+ <File>
+ <FileName>uartstdio.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>..\..\..\..\utils\uartstdio.c</FilePath>
+ </File>
+ <File>
+ <FileName>ustdlib.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>..\..\..\..\utils\ustdlib.c</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>Libraries</GroupName>
+ <Files>
+ <File>
+ <FileName>driverlib.lib</FileName>
+ <FileType>4</FileType>
+ <FilePath>..\..\..\..\driverlib\rvmdk\driverlib.lib</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>Documentation</GroupName>
+ <Files>
+ <File>
+ <FileName>readme.txt</FileName>
+ <FileType>5</FileType>
+ <FilePath>.\readme.txt</FilePath>
+ </File>
+ </Files>
+ </Group>
+ </Groups>
+ </Target>
+ </Targets>
+
+</Project>
diff --git a/boards/ek-tm4c123gxl/freertos_demo/freertos_demo_ccs.cmd b/boards/ek-tm4c123gxl/freertos_demo/freertos_demo_ccs.cmd new file mode 100644 index 0000000..27daec2 --- /dev/null +++ b/boards/ek-tm4c123gxl/freertos_demo/freertos_demo_ccs.cmd @@ -0,0 +1,70 @@ +/******************************************************************************
+ *
+ * freertos_demo_ccs.cmd - CCS linker configuration file for freertos_demo.
+ *
+ * Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+ * Software License Agreement
+ *
+ * Texas Instruments (TI) is supplying this software for use solely and
+ * exclusively on TI's microcontroller products. The software is owned by
+ * TI and/or its suppliers, and is protected under applicable copyright
+ * laws. You may not combine this software with "viral" open-source
+ * software in order to form a larger program.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+ * NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+ * NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+ * CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+ * DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ * This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+ *
+ *****************************************************************************/
+
+--retain=g_pfnVectors
+
+/* The following command line options are set as part of the CCS project. */
+/* If you are building using the command line, or for some reason want to */
+/* define them here, you can uncomment and modify these lines as needed. */
+/* If you are using CCS for building, it is probably better to make any such */
+/* modifications in your CCS project and leave this file alone. */
+/* */
+/* --heap_size=0 */
+/* --stack_size=256 */
+/* --library=rtsv7M3_T_le_eabi.lib */
+
+/* The starting address of the application. Normally the interrupt vectors */
+/* must be located at the beginning of the application. */
+#define APP_BASE 0x00000000
+#define RAM_BASE 0x20000000
+
+/* System memory map */
+
+MEMORY
+{
+ /* Application stored in and executes from internal flash */
+ FLASH (RX) : origin = APP_BASE, length = 0x00040000
+ /* Application uses internal RAM for data */
+ SRAM (RWX) : origin = 0x20000000, length = 0x00008000
+}
+
+/* Section allocation in memory */
+
+SECTIONS
+{
+ .intvecs: > APP_BASE
+ .text : > FLASH
+ .const : > FLASH
+ .cinit : > FLASH
+ .pinit : > FLASH
+ .init_array : > FLASH
+
+ .vtable : > RAM_BASE
+ .data : > SRAM
+ .bss : > SRAM
+ .sysmem : > SRAM
+ .stack : > SRAM
+}
+
+__STACK_TOP = __stack + 512;
diff --git a/boards/ek-tm4c123gxl/freertos_demo/gcc/freertos_demo.axf b/boards/ek-tm4c123gxl/freertos_demo/gcc/freertos_demo.axf Binary files differnew file mode 100644 index 0000000..d9c7473 --- /dev/null +++ b/boards/ek-tm4c123gxl/freertos_demo/gcc/freertos_demo.axf diff --git a/boards/ek-tm4c123gxl/freertos_demo/gcc/freertos_demo.bin b/boards/ek-tm4c123gxl/freertos_demo/gcc/freertos_demo.bin Binary files differnew file mode 100644 index 0000000..93fca3f --- /dev/null +++ b/boards/ek-tm4c123gxl/freertos_demo/gcc/freertos_demo.bin diff --git a/boards/ek-tm4c123gxl/freertos_demo/led_task.c b/boards/ek-tm4c123gxl/freertos_demo/led_task.c new file mode 100644 index 0000000..bfb50af --- /dev/null +++ b/boards/ek-tm4c123gxl/freertos_demo/led_task.c @@ -0,0 +1,237 @@ +//*****************************************************************************
+//
+// led_task.c - A simple flashing LED task.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdbool.h>
+#include <stdint.h>
+#include "inc/hw_memmap.h"
+#include "inc/hw_types.h"
+#include "driverlib/gpio.h"
+#include "driverlib/rom.h"
+#include "drivers/rgb.h"
+#include "drivers/buttons.h"
+#include "utils/uartstdio.h"
+#include "led_task.h"
+#include "priorities.h"
+#include "FreeRTOS.h"
+#include "task.h"
+#include "queue.h"
+#include "semphr.h"
+
+//*****************************************************************************
+//
+// The stack size for the LED toggle task.
+//
+//*****************************************************************************
+#define LEDTASKSTACKSIZE 128 // Stack size in words
+
+//*****************************************************************************
+//
+// The item size and queue size for the LED message queue.
+//
+//*****************************************************************************
+#define LED_ITEM_SIZE sizeof(uint8_t)
+#define LED_QUEUE_SIZE 5
+
+//*****************************************************************************
+//
+// Default LED toggle delay value. LED toggling frequency is twice this number.
+//
+//*****************************************************************************
+#define LED_TOGGLE_DELAY 250
+
+//*****************************************************************************
+//
+// The queue that holds messages sent to the LED task.
+//
+//*****************************************************************************
+xQueueHandle g_pLEDQueue;
+
+//
+// [G, R, B] range is 0 to 0xFFFF per color.
+//
+static uint32_t g_pui32Colors[3] = { 0x0000, 0x0000, 0x0000 };
+static uint8_t g_ui8ColorsIndx;
+
+extern xSemaphoreHandle g_pUARTSemaphore;
+
+//*****************************************************************************
+//
+// This task toggles the user selected LED at a user selected frequency. User
+// can make the selections by pressing the left and right buttons.
+//
+//*****************************************************************************
+static void
+LEDTask(void *pvParameters)
+{
+ portTickType ui32WakeTime;
+ uint32_t ui32LEDToggleDelay;
+ uint8_t i8Message;
+
+ //
+ // Initialize the LED Toggle Delay to default value.
+ //
+ ui32LEDToggleDelay = LED_TOGGLE_DELAY;
+
+ //
+ // Get the current tick count.
+ //
+ ui32WakeTime = xTaskGetTickCount();
+
+ //
+ // Loop forever.
+ //
+ while(1)
+ {
+ //
+ // Read the next message, if available on queue.
+ //
+ if(xQueueReceive(g_pLEDQueue, &i8Message, 0) == pdPASS)
+ {
+ //
+ // If left button, update to next LED.
+ //
+ if(i8Message == LEFT_BUTTON)
+ {
+ //
+ // Update the LED buffer to turn off the currently working.
+ //
+ g_pui32Colors[g_ui8ColorsIndx] = 0x0000;
+
+ //
+ // Update the index to next LED
+ g_ui8ColorsIndx++;
+ if(g_ui8ColorsIndx > 2)
+ {
+ g_ui8ColorsIndx = 0;
+ }
+
+ //
+ // Update the LED buffer to turn on the newly selected LED.
+ //
+ g_pui32Colors[g_ui8ColorsIndx] = 0x8000;
+
+ //
+ // Configure the new LED settings.
+ //
+ RGBColorSet(g_pui32Colors);
+
+ //
+ // Guard UART from concurrent access. Print the currently
+ // blinking LED.
+ //
+ xSemaphoreTake(g_pUARTSemaphore, portMAX_DELAY);
+ UARTprintf("Led %d is blinking. [R, G, B]\n", g_ui8ColorsIndx);
+ xSemaphoreGive(g_pUARTSemaphore);
+ }
+
+ //
+ // If right button, update delay time between toggles of led.
+ //
+ if(i8Message == RIGHT_BUTTON)
+ {
+ ui32LEDToggleDelay *= 2;
+ if(ui32LEDToggleDelay > 1000)
+ {
+ ui32LEDToggleDelay = LED_TOGGLE_DELAY / 2;
+ }
+
+ //
+ // Guard UART from concurrent access. Print the currently
+ // blinking frequency.
+ //
+ xSemaphoreTake(g_pUARTSemaphore, portMAX_DELAY);
+ UARTprintf("Led blinking frequency is %d ms.\n",
+ (ui32LEDToggleDelay * 2));
+ xSemaphoreGive(g_pUARTSemaphore);
+ }
+ }
+
+ //
+ // Turn on the LED.
+ //
+ RGBEnable();
+
+ //
+ // Wait for the required amount of time.
+ //
+ vTaskDelayUntil(&ui32WakeTime, ui32LEDToggleDelay / portTICK_RATE_MS);
+
+ //
+ // Turn off the LED.
+ //
+ RGBDisable();
+
+ //
+ // Wait for the required amount of time.
+ //
+ vTaskDelayUntil(&ui32WakeTime, ui32LEDToggleDelay / portTICK_RATE_MS);
+ }
+}
+
+//*****************************************************************************
+//
+// Initializes the LED task.
+//
+//*****************************************************************************
+uint32_t
+LEDTaskInit(void)
+{
+ //
+ // Initialize the GPIOs and Timers that drive the three LEDs.
+ //
+ RGBInit(1);
+ RGBIntensitySet(0.3f);
+
+ //
+ // Turn on the Green LED
+ //
+ g_ui8ColorsIndx = 0;
+ g_pui32Colors[g_ui8ColorsIndx] = 0x8000;
+ RGBColorSet(g_pui32Colors);
+
+ //
+ // Print the current loggling LED and frequency.
+ //
+ UARTprintf("\nLed %d is blinking. [R, G, B]\n", g_ui8ColorsIndx);
+ UARTprintf("Led blinking frequency is %d ms.\n", (LED_TOGGLE_DELAY * 2));
+
+ //
+ // Create a queue for sending messages to the LED task.
+ //
+ g_pLEDQueue = xQueueCreate(LED_QUEUE_SIZE, LED_ITEM_SIZE);
+
+ //
+ // Create the LED task.
+ //
+ if(xTaskCreate(LEDTask, (signed portCHAR *)"LED", LEDTASKSTACKSIZE, NULL,
+ tskIDLE_PRIORITY + PRIORITY_LED_TASK, NULL) != pdTRUE)
+ {
+ return(1);
+ }
+
+ //
+ // Success.
+ //
+ return(0);
+}
diff --git a/boards/ek-tm4c123gxl/freertos_demo/led_task.h b/boards/ek-tm4c123gxl/freertos_demo/led_task.h new file mode 100644 index 0000000..b99f689 --- /dev/null +++ b/boards/ek-tm4c123gxl/freertos_demo/led_task.h @@ -0,0 +1,35 @@ +//*****************************************************************************
+//
+// led_task.h - Prototypes for the LED task.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#ifndef __LED_TASK_H__
+#define __LED_TASK_H__
+
+//*****************************************************************************
+//
+// Prototypes for the LED task.
+//
+//*****************************************************************************
+extern uint32_t LEDTaskInit(void);
+
+#endif // __LED_TASK_H__
diff --git a/boards/ek-tm4c123gxl/freertos_demo/priorities.h b/boards/ek-tm4c123gxl/freertos_demo/priorities.h new file mode 100644 index 0000000..e003e1d --- /dev/null +++ b/boards/ek-tm4c123gxl/freertos_demo/priorities.h @@ -0,0 +1,37 @@ +//*****************************************************************************
+//
+// priorities.h - Priorities for the various FreeRTOS tasks.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#ifndef __PRIORITIES_H__
+#define __PRIORITIES_H__
+
+//*****************************************************************************
+//
+// The priorities of the various tasks.
+//
+//*****************************************************************************
+#define PRIORITY_SWITCH_TASK 2
+#define PRIORITY_LED_TASK 1
+
+
+#endif // __PRIORITIES_H__
diff --git a/boards/ek-tm4c123gxl/freertos_demo/readme.txt b/boards/ek-tm4c123gxl/freertos_demo/readme.txt new file mode 100644 index 0000000..008bf40 --- /dev/null +++ b/boards/ek-tm4c123gxl/freertos_demo/readme.txt @@ -0,0 +1,51 @@ +FreeRTOS Example
+
+This application demonstrates the use of FreeRTOS on Launchpad.
+
+The application blinks the user-selected LED at a user-selected frequency.
+To select the LED press the left button and to select the frequency press
+the right button. The UART outputs the application status at 115,200 baud,
+8-n-1 mode.
+
+This application utilizes FreeRTOS to perform the tasks in a concurrent
+fashion. The following tasks are created:
+
+- An LED task, which blinks the user-selected on-board LED at a
+ user-selected rate (changed via the buttons).
+
+- A Switch task, which monitors the buttons pressed and passes the
+ information to LED task.
+
+In addition to the tasks, this application also uses the following FreeRTOS
+resources:
+
+- A Queue to enable information transfer between tasks.
+
+- A Semaphore to guard the resource, UART, from access by multiple tasks at
+ the same time.
+
+- A non-blocking FreeRTOS Delay to put the tasks in blocked state when they
+ have nothing to do.
+
+For additional details on FreeRTOS, refer to the FreeRTOS web page at:
+http://www.freertos.org/
+
+-------------------------------------------------------------------------------
+
+Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+Software License Agreement
+
+Texas Instruments (TI) is supplying this software for use solely and
+exclusively on TI's microcontroller products. The software is owned by
+TI and/or its suppliers, and is protected under applicable copyright
+laws. You may not combine this software with "viral" open-source
+software in order to form a larger program.
+
+THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+DAMAGES, FOR ANY REASON WHATSOEVER.
+
+This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
diff --git a/boards/ek-tm4c123gxl/freertos_demo/rvmdk/freertos_demo.axf b/boards/ek-tm4c123gxl/freertos_demo/rvmdk/freertos_demo.axf Binary files differnew file mode 100644 index 0000000..fe751d4 --- /dev/null +++ b/boards/ek-tm4c123gxl/freertos_demo/rvmdk/freertos_demo.axf diff --git a/boards/ek-tm4c123gxl/freertos_demo/rvmdk/freertos_demo.bin b/boards/ek-tm4c123gxl/freertos_demo/rvmdk/freertos_demo.bin Binary files differnew file mode 100644 index 0000000..67e20cf --- /dev/null +++ b/boards/ek-tm4c123gxl/freertos_demo/rvmdk/freertos_demo.bin diff --git a/boards/ek-tm4c123gxl/freertos_demo/startup_ccs.c b/boards/ek-tm4c123gxl/freertos_demo/startup_ccs.c new file mode 100644 index 0000000..a11b60b --- /dev/null +++ b/boards/ek-tm4c123gxl/freertos_demo/startup_ccs.c @@ -0,0 +1,304 @@ +//*****************************************************************************
+//
+// startup_ccs.c - Startup code for use with TI's Code Composer Studio.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// External declaration for the reset handler that is to be called when the
+// processor is started
+//
+//*****************************************************************************
+extern void _c_int00(void);
+
+//*****************************************************************************
+//
+// Linker variable that marks the top of the stack.
+//
+//*****************************************************************************
+extern uint32_t __STACK_TOP;
+
+//*****************************************************************************
+//
+// External declarations for the interrupt handlers used by the application.
+//
+//*****************************************************************************
+extern void xPortPendSVHandler(void);
+extern void vPortSVCHandler(void);
+extern void xPortSysTickHandler(void);
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000 or at the start of
+// the program if located at a start address other than 0.
+//
+//*****************************************************************************
+#pragma DATA_SECTION(g_pfnVectors, ".intvecs")
+void (* const g_pfnVectors[])(void) =
+{
+ (void (*)(void))((uint32_t)&__STACK_TOP),
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ vPortSVCHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ xPortPendSVHandler, // The PendSV handler
+ xPortSysTickHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ IntDefaultHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ IntDefaultHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ //
+ // Jump to the CCS C initialization routine. This will enable the
+ // floating-point unit as well, so that does not need to be done here.
+ //
+ __asm(" .global _c_int00\n"
+ " b.w _c_int00");
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/freertos_demo/startup_ewarm.c b/boards/ek-tm4c123gxl/freertos_demo/startup_ewarm.c new file mode 100644 index 0000000..3e2ddfc --- /dev/null +++ b/boards/ek-tm4c123gxl/freertos_demo/startup_ewarm.c @@ -0,0 +1,335 @@ +//*****************************************************************************
+//
+// startup_ewarm.c - Startup code for use with IAR's Embedded Workbench,
+// version 5.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Enable the IAR extensions for this source file.
+//
+//*****************************************************************************
+#pragma language=extended
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// External declarations for the interrupt handlers used by the application.
+//
+//*****************************************************************************
+extern void xPortPendSVHandler(void);
+extern void vPortSVCHandler(void);
+extern void xPortSysTickHandler(void);
+
+//*****************************************************************************
+//
+// The entry point for the application startup code.
+//
+//*****************************************************************************
+extern void __iar_program_start(void);
+
+//*****************************************************************************
+//
+// Reserve space for the system stack.
+//
+//*****************************************************************************
+static uint32_t pui32Stack[128] @ ".noinit";
+
+//*****************************************************************************
+//
+// A union that describes the entries of the vector table. The union is needed
+// since the first entry is the stack pointer and the remainder are function
+// pointers.
+//
+//*****************************************************************************
+typedef union
+{
+ void (*pfnHandler)(void);
+ uint32_t ui32Ptr;
+}
+uVectorEntry;
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000.
+//
+//*****************************************************************************
+__root const uVectorEntry __vector_table[] @ ".intvec" =
+{
+ { .ui32Ptr = (uint32_t)pui32Stack + sizeof(pui32Stack) },
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ vPortSVCHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ xPortPendSVHandler, // The PendSV handler
+ xPortSysTickHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ IntDefaultHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ IntDefaultHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ //
+ // Enable the floating-point unit. This must be done here to handle the
+ // case where main() uses floating-point and the function prologue saves
+ // floating-point registers (which will fault if floating-point is not
+ // enabled). Any configuration of the floating-point unit using DriverLib
+ // APIs must be done here prior to the floating-point unit being enabled.
+ //
+ // Note that this does not use DriverLib since it might not be included in
+ // this project.
+ //
+ HWREG(NVIC_CPAC) = ((HWREG(NVIC_CPAC) &
+ ~(NVIC_CPAC_CP10_M | NVIC_CPAC_CP11_M)) |
+ NVIC_CPAC_CP10_FULL | NVIC_CPAC_CP11_FULL);
+
+ //
+ // Call the application's entry point.
+ //
+ __iar_program_start();
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/freertos_demo/startup_gcc.c b/boards/ek-tm4c123gxl/freertos_demo/startup_gcc.c new file mode 100644 index 0000000..6506a37 --- /dev/null +++ b/boards/ek-tm4c123gxl/freertos_demo/startup_gcc.c @@ -0,0 +1,351 @@ +//*****************************************************************************
+//
+// startup_gcc.c - Startup code for use with GNU tools.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// External declarations for the interrupt handlers used by the application.
+//
+//*****************************************************************************
+extern void xPortPendSVHandler(void);
+extern void vPortSVCHandler(void);
+extern void xPortSysTickHandler(void);
+
+//*****************************************************************************
+//
+// The entry point for the application.
+//
+//*****************************************************************************
+extern int main(void);
+
+//*****************************************************************************
+//
+// Reserve space for the system stack.
+//
+//*****************************************************************************
+static uint32_t pui32Stack[128];
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000.
+//
+//*****************************************************************************
+__attribute__ ((section(".isr_vector")))
+void (* const g_pfnVectors[])(void) =
+{
+ (void (*)(void))((uint32_t)pui32Stack + sizeof(pui32Stack)),
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ vPortSVCHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ xPortPendSVHandler, // The PendSV handler
+ xPortSysTickHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ IntDefaultHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ IntDefaultHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// The following are constructs created by the linker, indicating where the
+// the "data" and "bss" segments reside in memory. The initializers for the
+// for the "data" segment resides immediately following the "text" segment.
+//
+//*****************************************************************************
+extern uint32_t _etext;
+extern uint32_t _data;
+extern uint32_t _edata;
+extern uint32_t _bss;
+extern uint32_t _ebss;
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ uint32_t *pui32Src, *pui32Dest;
+
+ //
+ // Copy the data segment initializers from flash to SRAM.
+ //
+ pui32Src = &_etext;
+ for(pui32Dest = &_data; pui32Dest < &_edata; )
+ {
+ *pui32Dest++ = *pui32Src++;
+ }
+
+ //
+ // Zero fill the bss segment.
+ //
+ __asm(" ldr r0, =_bss\n"
+ " ldr r1, =_ebss\n"
+ " mov r2, #0\n"
+ " .thumb_func\n"
+ "zero_loop:\n"
+ " cmp r0, r1\n"
+ " it lt\n"
+ " strlt r2, [r0], #4\n"
+ " blt zero_loop");
+
+ //
+ // Enable the floating-point unit. This must be done here to handle the
+ // case where main() uses floating-point and the function prologue saves
+ // floating-point registers (which will fault if floating-point is not
+ // enabled). Any configuration of the floating-point unit using DriverLib
+ // APIs must be done here prior to the floating-point unit being enabled.
+ //
+ // Note that this does not use DriverLib since it might not be included in
+ // this project.
+ //
+ HWREG(NVIC_CPAC) = ((HWREG(NVIC_CPAC) &
+ ~(NVIC_CPAC_CP10_M | NVIC_CPAC_CP11_M)) |
+ NVIC_CPAC_CP10_FULL | NVIC_CPAC_CP11_FULL);
+
+ //
+ // Call the application's entry point.
+ //
+ main();
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/freertos_demo/startup_rvmdk.S b/boards/ek-tm4c123gxl/freertos_demo/startup_rvmdk.S new file mode 100644 index 0000000..40c49b1 --- /dev/null +++ b/boards/ek-tm4c123gxl/freertos_demo/startup_rvmdk.S @@ -0,0 +1,360 @@ +; <<< Use Configuration Wizard in Context Menu >>>
+;******************************************************************************
+;
+; startup_rvmdk.S - Startup code for use with Keil's uVision.
+;
+; Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+; Software License Agreement
+;
+; Texas Instruments (TI) is supplying this software for use solely and
+; exclusively on TI's microcontroller products. The software is owned by
+; TI and/or its suppliers, and is protected under applicable copyright
+; laws. You may not combine this software with "viral" open-source
+; software in order to form a larger program.
+;
+; THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+; NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+; NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+; A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+; CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+; DAMAGES, FOR ANY REASON WHATSOEVER.
+;
+; This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+;
+;******************************************************************************
+
+;******************************************************************************
+;
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+;******************************************************************************
+Stack EQU 0x00000200
+
+;******************************************************************************
+;
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+;******************************************************************************
+Heap EQU 0x00000000
+
+;******************************************************************************
+;
+; Allocate space for the stack.
+;
+;******************************************************************************
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+StackMem
+ SPACE Stack
+__initial_sp
+
+;******************************************************************************
+;
+; Allocate space for the heap.
+;
+;******************************************************************************
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+HeapMem
+ SPACE Heap
+__heap_limit
+
+;******************************************************************************
+;
+; Indicate that the code in this file preserves 8-byte alignment of the stack.
+;
+;******************************************************************************
+ PRESERVE8
+
+;******************************************************************************
+;
+; Place code into the reset code section.
+;
+;******************************************************************************
+ AREA RESET, CODE, READONLY
+ THUMB
+
+;******************************************************************************
+;
+; External declarations for the interrupt handlers used by the application.
+;
+;******************************************************************************
+ EXTERN xPortPendSVHandler
+ EXTERN vPortSVCHandler
+ EXTERN xPortSysTickHandler
+
+;******************************************************************************
+;
+; The vector table.
+;
+;******************************************************************************
+ EXPORT __Vectors
+__Vectors
+ DCD StackMem + Stack ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NmiSR ; NMI Handler
+ DCD FaultISR ; Hard Fault Handler
+ DCD IntDefaultHandler ; The MPU fault handler
+ DCD IntDefaultHandler ; The bus fault handler
+ DCD IntDefaultHandler ; The usage fault handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD vPortSVCHandler ; SVCall handler
+ DCD IntDefaultHandler ; Debug monitor handler
+ DCD 0 ; Reserved
+ DCD xPortPendSVHandler ; The PendSV handler
+ DCD xPortSysTickHandler ; The SysTick handler
+ DCD IntDefaultHandler ; GPIO Port A
+ DCD IntDefaultHandler ; GPIO Port B
+ DCD IntDefaultHandler ; GPIO Port C
+ DCD IntDefaultHandler ; GPIO Port D
+ DCD IntDefaultHandler ; GPIO Port E
+ DCD IntDefaultHandler ; UART0 Rx and Tx
+ DCD IntDefaultHandler ; UART1 Rx and Tx
+ DCD IntDefaultHandler ; SSI0 Rx and Tx
+ DCD IntDefaultHandler ; I2C0 Master and Slave
+ DCD IntDefaultHandler ; PWM Fault
+ DCD IntDefaultHandler ; PWM Generator 0
+ DCD IntDefaultHandler ; PWM Generator 1
+ DCD IntDefaultHandler ; PWM Generator 2
+ DCD IntDefaultHandler ; Quadrature Encoder 0
+ DCD IntDefaultHandler ; ADC Sequence 0
+ DCD IntDefaultHandler ; ADC Sequence 1
+ DCD IntDefaultHandler ; ADC Sequence 2
+ DCD IntDefaultHandler ; ADC Sequence 3
+ DCD IntDefaultHandler ; Watchdog timer
+ DCD IntDefaultHandler ; Timer 0 subtimer A
+ DCD IntDefaultHandler ; Timer 0 subtimer B
+ DCD IntDefaultHandler ; Timer 1 subtimer A
+ DCD IntDefaultHandler ; Timer 1 subtimer B
+ DCD IntDefaultHandler ; Timer 2 subtimer A
+ DCD IntDefaultHandler ; Timer 2 subtimer B
+ DCD IntDefaultHandler ; Analog Comparator 0
+ DCD IntDefaultHandler ; Analog Comparator 1
+ DCD IntDefaultHandler ; Analog Comparator 2
+ DCD IntDefaultHandler ; System Control (PLL, OSC, BO)
+ DCD IntDefaultHandler ; FLASH Control
+ DCD IntDefaultHandler ; GPIO Port F
+ DCD IntDefaultHandler ; GPIO Port G
+ DCD IntDefaultHandler ; GPIO Port H
+ DCD IntDefaultHandler ; UART2 Rx and Tx
+ DCD IntDefaultHandler ; SSI1 Rx and Tx
+ DCD IntDefaultHandler ; Timer 3 subtimer A
+ DCD IntDefaultHandler ; Timer 3 subtimer B
+ DCD IntDefaultHandler ; I2C1 Master and Slave
+ DCD IntDefaultHandler ; Quadrature Encoder 1
+ DCD IntDefaultHandler ; CAN0
+ DCD IntDefaultHandler ; CAN1
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; Hibernate
+ DCD IntDefaultHandler ; USB0
+ DCD IntDefaultHandler ; PWM Generator 3
+ DCD IntDefaultHandler ; uDMA Software Transfer
+ DCD IntDefaultHandler ; uDMA Error
+ DCD IntDefaultHandler ; ADC1 Sequence 0
+ DCD IntDefaultHandler ; ADC1 Sequence 1
+ DCD IntDefaultHandler ; ADC1 Sequence 2
+ DCD IntDefaultHandler ; ADC1 Sequence 3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; GPIO Port J
+ DCD IntDefaultHandler ; GPIO Port K
+ DCD IntDefaultHandler ; GPIO Port L
+ DCD IntDefaultHandler ; SSI2 Rx and Tx
+ DCD IntDefaultHandler ; SSI3 Rx and Tx
+ DCD IntDefaultHandler ; UART3 Rx and Tx
+ DCD IntDefaultHandler ; UART4 Rx and Tx
+ DCD IntDefaultHandler ; UART5 Rx and Tx
+ DCD IntDefaultHandler ; UART6 Rx and Tx
+ DCD IntDefaultHandler ; UART7 Rx and Tx
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; I2C2 Master and Slave
+ DCD IntDefaultHandler ; I2C3 Master and Slave
+ DCD IntDefaultHandler ; Timer 4 subtimer A
+ DCD IntDefaultHandler ; Timer 4 subtimer B
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; Timer 5 subtimer A
+ DCD IntDefaultHandler ; Timer 5 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 0 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 0 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 1 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 1 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 2 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 2 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 3 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 3 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 4 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 4 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 5 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 5 subtimer B
+ DCD IntDefaultHandler ; FPU
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; I2C4 Master and Slave
+ DCD IntDefaultHandler ; I2C5 Master and Slave
+ DCD IntDefaultHandler ; GPIO Port M
+ DCD IntDefaultHandler ; GPIO Port N
+ DCD IntDefaultHandler ; Quadrature Encoder 2
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; GPIO Port P (Summary or P0)
+ DCD IntDefaultHandler ; GPIO Port P1
+ DCD IntDefaultHandler ; GPIO Port P2
+ DCD IntDefaultHandler ; GPIO Port P3
+ DCD IntDefaultHandler ; GPIO Port P4
+ DCD IntDefaultHandler ; GPIO Port P5
+ DCD IntDefaultHandler ; GPIO Port P6
+ DCD IntDefaultHandler ; GPIO Port P7
+ DCD IntDefaultHandler ; GPIO Port Q (Summary or Q0)
+ DCD IntDefaultHandler ; GPIO Port Q1
+ DCD IntDefaultHandler ; GPIO Port Q2
+ DCD IntDefaultHandler ; GPIO Port Q3
+ DCD IntDefaultHandler ; GPIO Port Q4
+ DCD IntDefaultHandler ; GPIO Port Q5
+ DCD IntDefaultHandler ; GPIO Port Q6
+ DCD IntDefaultHandler ; GPIO Port Q7
+ DCD IntDefaultHandler ; GPIO Port R
+ DCD IntDefaultHandler ; GPIO Port S
+ DCD IntDefaultHandler ; PWM 1 Generator 0
+ DCD IntDefaultHandler ; PWM 1 Generator 1
+ DCD IntDefaultHandler ; PWM 1 Generator 2
+ DCD IntDefaultHandler ; PWM 1 Generator 3
+ DCD IntDefaultHandler ; PWM 1 Fault
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor first starts execution
+; following a reset event.
+;
+;******************************************************************************
+ EXPORT Reset_Handler
+Reset_Handler
+ ;
+ ; Enable the floating-point unit. This must be done here to handle the
+ ; case where main() uses floating-point and the function prologue saves
+ ; floating-point registers (which will fault if floating-point is not
+ ; enabled). Any configuration of the floating-point unit using
+ ; DriverLib APIs must be done here prior to the floating-point unit
+ ; being enabled.
+ ;
+ ; Note that this does not use DriverLib since it might not be included
+ ; in this project.
+ ;
+ MOVW R0, #0xED88
+ MOVT R0, #0xE000
+ LDR R1, [R0]
+ ORR R1, #0x00F00000
+ STR R1, [R0]
+
+ ;
+ ; Call the C library enty point that handles startup. This will copy
+ ; the .data section initializers from flash to SRAM and zero fill the
+ ; .bss section.
+ ;
+ IMPORT __main
+ B __main
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives a NMI. This
+; simply enters an infinite loop, preserving the system state for examination
+; by a debugger.
+;
+;******************************************************************************
+NmiSR
+ B NmiSR
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives a fault
+; interrupt. This simply enters an infinite loop, preserving the system state
+; for examination by a debugger.
+;
+;******************************************************************************
+FaultISR
+ B FaultISR
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives an unexpected
+; interrupt. This simply enters an infinite loop, preserving the system state
+; for examination by a debugger.
+;
+;******************************************************************************
+IntDefaultHandler
+ B IntDefaultHandler
+
+;******************************************************************************
+;
+; Make sure the end of this section is aligned.
+;
+;******************************************************************************
+ ALIGN
+
+;******************************************************************************
+;
+; Some code in the normal code section for initializing the heap and stack.
+;
+;******************************************************************************
+ AREA |.text|, CODE, READONLY
+
+;******************************************************************************
+;
+; The function expected of the C library startup code for defining the stack
+; and heap memory locations. For the C library version of the startup code,
+; provide this function so that the C library initialization code can find out
+; the location of the stack and heap.
+;
+;******************************************************************************
+ IF :DEF: __MICROLIB
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+ ELSE
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+__user_initial_stackheap
+ LDR R0, =HeapMem
+ LDR R1, =(StackMem + Stack)
+ LDR R2, =(HeapMem + Heap)
+ LDR R3, =StackMem
+ BX LR
+ ENDIF
+
+;******************************************************************************
+;
+; Make sure the end of this section is aligned.
+;
+;******************************************************************************
+ ALIGN
+
+;******************************************************************************
+;
+; Tell the assembler that we're done.
+;
+;******************************************************************************
+ END
diff --git a/boards/ek-tm4c123gxl/freertos_demo/switch_task.c b/boards/ek-tm4c123gxl/freertos_demo/switch_task.c new file mode 100644 index 0000000..cc90b73 --- /dev/null +++ b/boards/ek-tm4c123gxl/freertos_demo/switch_task.c @@ -0,0 +1,177 @@ +//*****************************************************************************
+//
+// switch_task.c - A simple switch task to process the buttons.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdbool.h>
+#include <stdint.h>
+#include "inc/hw_memmap.h"
+#include "inc/hw_types.h"
+#include "inc/hw_gpio.h"
+#include "driverlib/sysctl.h"
+#include "driverlib/gpio.h"
+#include "driverlib/rom.h"
+#include "drivers/buttons.h"
+#include "utils/uartstdio.h"
+#include "switch_task.h"
+#include "led_task.h"
+#include "priorities.h"
+#include "FreeRTOS.h"
+#include "task.h"
+#include "queue.h"
+#include "semphr.h"
+
+//*****************************************************************************
+//
+// The stack size for the display task.
+//
+//*****************************************************************************
+#define SWITCHTASKSTACKSIZE 128 // Stack size in words
+
+extern xQueueHandle g_pLEDQueue;
+extern xSemaphoreHandle g_pUARTSemaphore;
+
+//*****************************************************************************
+//
+// This task reads the buttons' state and passes this information to LEDTask.
+//
+//*****************************************************************************
+static void
+SwitchTask(void *pvParameters)
+{
+ portTickType ui16LastTime;
+ uint32_t ui32SwitchDelay = 25;
+ uint8_t ui8CurButtonState, ui8PrevButtonState;
+ uint8_t ui8Message;
+
+ ui8CurButtonState = ui8PrevButtonState = 0;
+
+ //
+ // Get the current tick count.
+ //
+ ui16LastTime = xTaskGetTickCount();
+
+ //
+ // Loop forever.
+ //
+ while(1)
+ {
+ //
+ // Poll the debounced state of the buttons.
+ //
+ ui8CurButtonState = ButtonsPoll(0, 0);
+
+ //
+ // Check if previous debounced state is equal to the current state.
+ //
+ if(ui8CurButtonState != ui8PrevButtonState)
+ {
+ ui8PrevButtonState = ui8CurButtonState;
+
+ //
+ // Check to make sure the change in state is due to button press
+ // and not due to button release.
+ //
+ if((ui8CurButtonState & ALL_BUTTONS) != 0)
+ {
+ if((ui8CurButtonState & ALL_BUTTONS) == LEFT_BUTTON)
+ {
+ ui8Message = LEFT_BUTTON;
+
+ //
+ // Guard UART from concurrent access.
+ //
+ xSemaphoreTake(g_pUARTSemaphore, portMAX_DELAY);
+ UARTprintf("Left Button is pressed.\n");
+ xSemaphoreGive(g_pUARTSemaphore);
+ }
+ else if((ui8CurButtonState & ALL_BUTTONS) == RIGHT_BUTTON)
+ {
+ ui8Message = RIGHT_BUTTON;
+
+ //
+ // Guard UART from concurrent access.
+ //
+ xSemaphoreTake(g_pUARTSemaphore, portMAX_DELAY);
+ UARTprintf("Right Button is pressed.\n");
+ xSemaphoreGive(g_pUARTSemaphore);
+ }
+
+ //
+ // Pass the value of the button pressed to LEDTask.
+ //
+ if(xQueueSend(g_pLEDQueue, &ui8Message, portMAX_DELAY) !=
+ pdPASS)
+ {
+ //
+ // Error. The queue should never be full. If so print the
+ // error message on UART and wait for ever.
+ //
+ UARTprintf("\nQueue full. This should never happen.\n");
+ while(1)
+ {
+ }
+ }
+ }
+ }
+
+ //
+ // Wait for the required amount of time to check back.
+ //
+ vTaskDelayUntil(&ui16LastTime, ui32SwitchDelay / portTICK_RATE_MS);
+ }
+}
+
+//*****************************************************************************
+//
+// Initializes the switch task.
+//
+//*****************************************************************************
+uint32_t
+SwitchTaskInit(void)
+{
+ //
+ // Unlock the GPIO LOCK register for Right button to work.
+ //
+ HWREG(GPIO_PORTF_BASE + GPIO_O_LOCK) = GPIO_LOCK_KEY;
+ HWREG(GPIO_PORTF_BASE + GPIO_O_CR) = 0xFF;
+
+ //
+ // Initialize the buttons
+ //
+ ButtonsInit();
+
+ //
+ // Create the switch task.
+ //
+ if(xTaskCreate(SwitchTask, (signed portCHAR *)"Switch",
+ SWITCHTASKSTACKSIZE, NULL, tskIDLE_PRIORITY +
+ PRIORITY_SWITCH_TASK, NULL) != pdTRUE)
+ {
+ return(1);
+ }
+
+ //
+ // Success.
+ //
+ return(0);
+}
diff --git a/boards/ek-tm4c123gxl/freertos_demo/switch_task.h b/boards/ek-tm4c123gxl/freertos_demo/switch_task.h new file mode 100644 index 0000000..89957b8 --- /dev/null +++ b/boards/ek-tm4c123gxl/freertos_demo/switch_task.h @@ -0,0 +1,35 @@ +//*****************************************************************************
+//
+// switch_task.h - Prototypes for the switch task.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#ifndef __SWITCH_TASK_H__
+#define __SWITCH_TASK_H__
+
+//*****************************************************************************
+//
+// Prototypes for the switch task.
+//
+//*****************************************************************************
+extern uint32_t SwitchTaskInit(void);
+
+#endif // __SWITCH_TASK_H__
diff --git a/boards/ek-tm4c123gxl/gpio_jtag/Makefile b/boards/ek-tm4c123gxl/gpio_jtag/Makefile new file mode 100644 index 0000000..1c0d29e --- /dev/null +++ b/boards/ek-tm4c123gxl/gpio_jtag/Makefile @@ -0,0 +1,88 @@ +#******************************************************************************
+#
+# Makefile - Rules for building the gpio_jtag example.
+#
+# Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+# Software License Agreement
+#
+# Texas Instruments (TI) is supplying this software for use solely and
+# exclusively on TI's microcontroller products. The software is owned by
+# TI and/or its suppliers, and is protected under applicable copyright
+# laws. You may not combine this software with "viral" open-source
+# software in order to form a larger program.
+#
+# THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+# NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+# NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+# CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+# DAMAGES, FOR ANY REASON WHATSOEVER.
+#
+# This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+#
+#******************************************************************************
+
+#
+# Defines the part type that this project uses.
+#
+PART=TM4C123GH6PM
+
+#
+# The base directory for TivaWare.
+#
+ROOT=../../../..
+
+#
+# Include the common make definitions.
+#
+include ${ROOT}/makedefs
+
+#
+# Where to find source files that do not live in this directory.
+#
+VPATH=../drivers
+VPATH+=../../../../utils
+
+#
+# Where to find header files that do not live in the source directory.
+#
+IPATH=..
+IPATH+=../../../..
+
+#
+# The default rule, which causes the gpio_jtag example to be built.
+#
+all: ${COMPILER}
+all: ${COMPILER}/gpio_jtag.axf
+
+#
+# The rule to clean out all the build products.
+#
+clean:
+ @rm -rf ${COMPILER} ${wildcard *~}
+
+#
+# The rule to create the target directory.
+#
+${COMPILER}:
+ @mkdir -p ${COMPILER}
+
+#
+# Rules for building the gpio_jtag example.
+#
+${COMPILER}/gpio_jtag.axf: ${COMPILER}/buttons.o
+${COMPILER}/gpio_jtag.axf: ${COMPILER}/gpio_jtag.o
+${COMPILER}/gpio_jtag.axf: ${COMPILER}/startup_${COMPILER}.o
+${COMPILER}/gpio_jtag.axf: ${COMPILER}/uartstdio.o
+${COMPILER}/gpio_jtag.axf: ${ROOT}/driverlib/${COMPILER}/libdriver.a
+${COMPILER}/gpio_jtag.axf: gpio_jtag.ld
+SCATTERgcc_gpio_jtag=gpio_jtag.ld
+ENTRY_gpio_jtag=ResetISR
+CFLAGSgcc=-DTARGET_IS_TM4C123_RB1
+
+#
+# Include the automatically generated dependency files.
+#
+ifneq (${MAKECMDGOALS},clean)
+-include ${wildcard ${COMPILER}/*.d} __dummy__
+endif
diff --git a/boards/ek-tm4c123gxl/gpio_jtag/ccs/.ccsimportspec b/boards/ek-tm4c123gxl/gpio_jtag/ccs/.ccsimportspec new file mode 100644 index 0000000..005f812 --- /dev/null +++ b/boards/ek-tm4c123gxl/gpio_jtag/ccs/.ccsimportspec @@ -0,0 +1,8 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<importSpec>
+ <source root="..">
+ <file name="gpio_jtag.c"/>
+ <file regex=".*_ccs\.cmd"/>
+ <file name="startup_ccs.c"/>
+ </source>
+</importSpec>
diff --git a/boards/ek-tm4c123gxl/gpio_jtag/ccs/.ccsproject b/boards/ek-tm4c123gxl/gpio_jtag/ccs/.ccsproject new file mode 100644 index 0000000..75fb50e --- /dev/null +++ b/boards/ek-tm4c123gxl/gpio_jtag/ccs/.ccsproject @@ -0,0 +1,10 @@ +<?xml version="1.0" encoding="UTF-8" ?>
+<?ccsproject version="1.0"?>
+<projectOptions>
+ <deviceVariant value="Cortex M.TM4C123GH6PM"/>
+ <deviceFamily value="TMS470"/>
+ <deviceEndianness value="little"/>
+ <codegenToolVersion value="5.0.4"/>
+ <isElfFormat value="true"/>
+ <rts value="libc.a"/>
+</projectOptions>
diff --git a/boards/ek-tm4c123gxl/gpio_jtag/ccs/.cproject b/boards/ek-tm4c123gxl/gpio_jtag/ccs/.cproject new file mode 100644 index 0000000..3d146a4 --- /dev/null +++ b/boards/ek-tm4c123gxl/gpio_jtag/ccs/.cproject @@ -0,0 +1,189 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+ <storageModule configRelations="2" moduleId="org.eclipse.cdt.core.settings">
+ <cconfiguration id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1329687342">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1329687342" moduleId="org.eclipse.cdt.core.settings" name="Debug">
+ <macros>
+ <stringMacro name="SW_ROOT" type="VALUE_PATH_DIR" value="${PROJECT_ROOT}/../../../../.."/>
+ </macros>
+ <externalSettings/>
+ <extensions>
+ <extension id="com.ti.ccstudio.binaryparser.CoffParser" point="org.eclipse.cdt.core.BinaryParser"/>
+ <extension id="com.ti.ccstudio.errorparser.CoffErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.LinkErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.AsmErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactExtension="out" artifactName="${ProjName}" buildProperties="" cleanCommand="${CG_CLEAN_CMD}" description="" id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1329687342" name="Debug" parent="com.ti.ccstudio.buildDefinitions.TMS470.Debug" postbuildStep=""${CCE_INSTALL_ROOT}/utils/tiobj2bin/tiobj2bin" "${BuildArtifactFileName}" "${BuildArtifactFileBaseName}.bin" "${CG_TOOL_ROOT}/bin/armofd" "${CG_TOOL_ROOT}/bin/armhex" "${CCE_INSTALL_ROOT}/utils/tiobj2bin/mkhex4bin"">
+ <folderInfo id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1329687342." name="/" resourcePath="">
+ <toolChain id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.DebugToolchain.1398376845" name="TI Build Tools" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.DebugToolchain" targetTool="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug.1812596853">
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS.1601708085" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS" valueType="stringList">
+ <listOptionValue builtIn="false" value="DEVICE_CONFIGURATION_ID=Cortex M.TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="DEVICE_ENDIANNESS=little"/>
+ <listOptionValue builtIn="false" value="OUTPUT_FORMAT=ELF"/>
+ <listOptionValue builtIn="false" value="CCS_MBS_VERSION=5.1.0.01"/>
+ <listOptionValue builtIn="false" value="RUNTIME_SUPPORT_LIBRARY=libc.a"/>
+ <listOptionValue builtIn="false" value="OUTPUT_TYPE=executable"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION.1018748375" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION" value="5.0.4" valueType="string"/>
+ <targetPlatform id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformDebug.116766560" name="Platform" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformDebug"/>
+ <builder buildPath="${BuildDirectory}" id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderDebug.942770062" name="GNU Make.Debug" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderDebug"/>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerDebug.1407369865" name="ARM Compiler" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerDebug">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.321954703" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.7M4" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.245520454" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.1316848778" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.eabi" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.143847894" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.FPv4SPD16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL.1420533426" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL.SYMDEBUG__DWARF" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING.1363940903" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING" valueType="stringList">
+ <listOptionValue builtIn="false" value="225"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER.319629702" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.2128500593" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH.571641383" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH" valueType="includePath">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/examples/boards/ek-tm4c123gxl""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN.1161767538" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.1241087219" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.on" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL.361811947" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL.2" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC.365331097" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL.811602676" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE.484876219" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE" valueType="definedSymbols">
+ <listOptionValue builtIn="false" value="ccs="ccs""/>
+ <listOptionValue builtIn="false" value="PART_TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="TARGET_IS_TM4C123_RB1"/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS.520213368" name="C Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS.2007541016" name="C++ Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS.1150253523" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS.1664918137" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS"/>
+ </tool>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug.1812596853" name="ARM Linker" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE.964243595" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE" value=""gpio_jtag_ccs.map"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE.215126222" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE" value="256" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE.1747587242" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE" value="0" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE.1398032482" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE" value=""${ProjName}.out"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO.1167687568" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO" value=""${ProjName}_linkInfo.xml"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER.45714160" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.1811988019" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH.2089013757" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH" valueType="libPaths">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/lib""/>
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY.917777249" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY" valueType="libs">
+ <listOptionValue builtIn="false" value=""libc.a""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/driverlib/ccs/Debug/driverlib.lib""/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS.1620385482" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS.175900735" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS.973213173" name="Generated Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS"/>
+ </tool>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ <cconfiguration id="com.ti.ccstudio.buildDefinitions.TMS470.Release.1234065794">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.ti.ccstudio.buildDefinitions.TMS470.Release.1234065794" moduleId="org.eclipse.cdt.core.settings" name="Release">
+ <macros>
+ <stringMacro name="SW_ROOT" type="VALUE_PATH_DIR" value="${PROJECT_ROOT}/../../../../.."/>
+ </macros>
+ <externalSettings/>
+ <extensions>
+ <extension id="com.ti.ccstudio.binaryparser.CoffParser" point="org.eclipse.cdt.core.BinaryParser"/>
+ <extension id="com.ti.ccstudio.errorparser.CoffErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.LinkErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.AsmErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactExtension="out" artifactName="${ProjName}" buildProperties="" cleanCommand="${CG_CLEAN_CMD}" description="" id="com.ti.ccstudio.buildDefinitions.TMS470.Release.1234065794" name="Release" parent="com.ti.ccstudio.buildDefinitions.TMS470.Release" postbuildStep=""${CCE_INSTALL_ROOT}/utils/tiobj2bin/tiobj2bin" "${BuildArtifactFileName}" "${BuildArtifactFileBaseName}.bin" "${CG_TOOL_ROOT}/bin/armofd" "${CG_TOOL_ROOT}/bin/armhex" "${CCE_INSTALL_ROOT}/utils/tiobj2bin/mkhex4bin"">
+ <folderInfo id="com.ti.ccstudio.buildDefinitions.TMS470.Release.1234065794." name="/" resourcePath="">
+ <toolChain id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.ReleaseToolchain.812206713" name="TI Build Tools" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.ReleaseToolchain" targetTool="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease.369334710">
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS.1720290466" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS" valueType="stringList">
+ <listOptionValue builtIn="false" value="DEVICE_CONFIGURATION_ID=Cortex M.TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="DEVICE_ENDIANNESS=little"/>
+ <listOptionValue builtIn="false" value="OUTPUT_FORMAT=ELF"/>
+ <listOptionValue builtIn="false" value="CCS_MBS_VERSION=5.1.0.01"/>
+ <listOptionValue builtIn="false" value="RUNTIME_SUPPORT_LIBRARY=libc.a"/>
+ <listOptionValue builtIn="false" value="OUTPUT_TYPE=executable"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION.1812722288" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION" value="5.0.4" valueType="string"/>
+ <targetPlatform id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformRelease.1290550794" name="Platform" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformRelease"/>
+ <builder buildPath="${BuildDirectory}" id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderRelease.885489069" name="GNU Make.Release" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderRelease"/>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerRelease.1789996095" name="ARM Compiler" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerRelease">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.909067010" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.7M4" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.634524585" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.992967453" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.eabi" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.1792098431" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.FPv4SPD16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING.1389246270" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING" valueType="stringList">
+ <listOptionValue builtIn="false" value="225"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER.1510741687" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.1207734587" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH.1179723892" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH" valueType="includePath">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/examples/boards/ek-tm4c123gxl""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN.924504337" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.836820630" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.on" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC.1795852420" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL.1809811077" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE.1406994589" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE" valueType="definedSymbols">
+ <listOptionValue builtIn="false" value="ccs="ccs""/>
+ <listOptionValue builtIn="false" value="PART_TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="TARGET_IS_TM4C123_RB1"/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS.480657990" name="C Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS.262247944" name="C++ Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS.2068086493" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS.1706997265" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS"/>
+ </tool>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease.369334710" name="ARM Linker" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE.479807774" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE" value=""gpio_jtag_ccs.map"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE.1353995677" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE" value="256" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE.220797214" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE" value="0" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE.7683492" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE" value=""${ProjName}.out"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO.1626178159" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO" value=""${ProjName}_linkInfo.xml"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER.1994444261" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.1776039975" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH.1510734597" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH" valueType="libPaths">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/lib""/>
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY.1919459614" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY" valueType="libs">
+ <listOptionValue builtIn="false" value=""libc.a""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/driverlib/ccs/Debug/driverlib.lib""/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS.1229323904" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS.879140481" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS.466765136" name="Generated Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS"/>
+ </tool>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <project id="gpio_jtag.com.ti.ccstudio.buildDefinitions.TMS470.ProjectType.1439411238" name="ARM" projectType="com.ti.ccstudio.buildDefinitions.TMS470.ProjectType"/>
+ </storageModule>
+ <storageModule moduleId="scannerConfiguration"/>
+ <storageModule moduleId="org.eclipse.cdt.core.language.mapping">
+ <project-mappings>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.asmSource" language="com.ti.ccstudio.core.TIASMLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cHeader" language="com.ti.ccstudio.core.TIGCCLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cSource" language="com.ti.ccstudio.core.TIGCCLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cxxHeader" language="com.ti.ccstudio.core.TIGPPLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cxxSource" language="com.ti.ccstudio.core.TIGPPLanguage"/>
+ </project-mappings>
+ </storageModule>
+</cproject>
diff --git a/boards/ek-tm4c123gxl/gpio_jtag/ccs/.project b/boards/ek-tm4c123gxl/gpio_jtag/ccs/.project new file mode 100644 index 0000000..20946c3 --- /dev/null +++ b/boards/ek-tm4c123gxl/gpio_jtag/ccs/.project @@ -0,0 +1,60 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+ <name>gpio_jtag</name>
+ <comment></comment>
+ <projects>
+ </projects>
+ <buildSpec>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+ <triggers>full,incremental,</triggers>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ </buildSpec>
+ <natures>
+ <nature>com.ti.ccstudio.core.ccsNature</nature>
+ <nature>org.eclipse.cdt.core.cnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+ <nature>org.eclipse.cdt.core.ccnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+ </natures>
+ <linkedResources>
+ <link>
+ <name>gpio_jtag.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/gpio_jtag/gpio_jtag.c</locationURI>
+ </link>
+ <link>
+ <name>gpio_jtag_ccs.cmd</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/gpio_jtag/gpio_jtag_ccs.cmd</locationURI>
+ </link>
+ <link>
+ <name>startup_ccs.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/gpio_jtag/startup_ccs.c</locationURI>
+ </link>
+ <link>
+ <name>drivers/buttons.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/drivers/buttons.c</locationURI>
+ </link>
+ <link>
+ <name>utils/uartstdio.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/utils/uartstdio.c</locationURI>
+ </link>
+ </linkedResources>
+ <variableList>
+ <variable>
+ <name>SW_ROOT</name>
+ <value>$%7BPARENT-5-PROJECT_LOC%7D</value>
+ </variable>
+ </variableList>
+</projectDescription>
diff --git a/boards/ek-tm4c123gxl/gpio_jtag/ccs/.settings/org.eclipse.cdt.codan.core.prefs b/boards/ek-tm4c123gxl/gpio_jtag/ccs/.settings/org.eclipse.cdt.codan.core.prefs new file mode 100644 index 0000000..98b6350 --- /dev/null +++ b/boards/ek-tm4c123gxl/gpio_jtag/ccs/.settings/org.eclipse.cdt.codan.core.prefs @@ -0,0 +1,3 @@ +eclipse.preferences.version=1
+inEditor=false
+onBuild=false
diff --git a/boards/ek-tm4c123gxl/gpio_jtag/ccs/Debug/gpio_jtag.bin b/boards/ek-tm4c123gxl/gpio_jtag/ccs/Debug/gpio_jtag.bin Binary files differnew file mode 100644 index 0000000..c367b45 --- /dev/null +++ b/boards/ek-tm4c123gxl/gpio_jtag/ccs/Debug/gpio_jtag.bin diff --git a/boards/ek-tm4c123gxl/gpio_jtag/ccs/Debug/gpio_jtag.out b/boards/ek-tm4c123gxl/gpio_jtag/ccs/Debug/gpio_jtag.out Binary files differnew file mode 100644 index 0000000..9902a8f --- /dev/null +++ b/boards/ek-tm4c123gxl/gpio_jtag/ccs/Debug/gpio_jtag.out diff --git a/boards/ek-tm4c123gxl/gpio_jtag/ccs/macros.ini_initial b/boards/ek-tm4c123gxl/gpio_jtag/ccs/macros.ini_initial new file mode 100644 index 0000000..31214b5 --- /dev/null +++ b/boards/ek-tm4c123gxl/gpio_jtag/ccs/macros.ini_initial @@ -0,0 +1 @@ +SW_ROOT = ../../../../..
diff --git a/boards/ek-tm4c123gxl/gpio_jtag/ccs/target_config.ccxml b/boards/ek-tm4c123gxl/gpio_jtag/ccs/target_config.ccxml new file mode 100644 index 0000000..be4342a --- /dev/null +++ b/boards/ek-tm4c123gxl/gpio_jtag/ccs/target_config.ccxml @@ -0,0 +1,13 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<configurations XML_version="1.2" id="configurations_0">
+ <configuration XML_version="1.2" id="Stellaris In-Circuit Debug Interface_0">
+ <instance XML_version="1.2" desc="Stellaris In-Circuit Debug Interface_0" href="connections/Stellaris_ICDI_Connection.xml" id="Stellaris In-Circuit Debug Interface_0" xml="Stellaris_ICDI_Connection.xml" xmlpath="connections"/>
+ <connection XML_version="1.2" id="Stellaris In-Circuit Debug Interface_0">
+ <instance XML_version="1.2" href="drivers/stellaris_cs_dap.xml" id="drivers" xml="stellaris_cs_dap.xml" xmlpath="drivers"/>
+ <instance XML_version="1.2" href="drivers/stellaris_cortex_m4.xml" id="drivers" xml="stellaris_cortex_m4.xml" xmlpath="drivers"/>
+ <platform XML_version="1.2" id="platform_0">
+ <instance XML_version="1.2" desc="Stellaris TM4C123GH6PM_0" href="devices/tm4c123gh6pm.xml" id="Stellaris TM4C123GH6PM_0" xml="tm4c123gh6pm.xml" xmlpath="devices"/>
+ </platform>
+ </connection>
+ </configuration>
+</configurations>
diff --git a/boards/ek-tm4c123gxl/gpio_jtag/ewarm/Exe/gpio_jtag.bin b/boards/ek-tm4c123gxl/gpio_jtag/ewarm/Exe/gpio_jtag.bin Binary files differnew file mode 100644 index 0000000..1b07f0f --- /dev/null +++ b/boards/ek-tm4c123gxl/gpio_jtag/ewarm/Exe/gpio_jtag.bin diff --git a/boards/ek-tm4c123gxl/gpio_jtag/ewarm/Exe/gpio_jtag.out b/boards/ek-tm4c123gxl/gpio_jtag/ewarm/Exe/gpio_jtag.out Binary files differnew file mode 100644 index 0000000..79229bd --- /dev/null +++ b/boards/ek-tm4c123gxl/gpio_jtag/ewarm/Exe/gpio_jtag.out diff --git a/boards/ek-tm4c123gxl/gpio_jtag/gcc/gpio_jtag.axf b/boards/ek-tm4c123gxl/gpio_jtag/gcc/gpio_jtag.axf Binary files differnew file mode 100644 index 0000000..d5d9900 --- /dev/null +++ b/boards/ek-tm4c123gxl/gpio_jtag/gcc/gpio_jtag.axf diff --git a/boards/ek-tm4c123gxl/gpio_jtag/gcc/gpio_jtag.bin b/boards/ek-tm4c123gxl/gpio_jtag/gcc/gpio_jtag.bin Binary files differnew file mode 100644 index 0000000..635ac80 --- /dev/null +++ b/boards/ek-tm4c123gxl/gpio_jtag/gcc/gpio_jtag.bin diff --git a/boards/ek-tm4c123gxl/gpio_jtag/gpio_jtag.c b/boards/ek-tm4c123gxl/gpio_jtag/gpio_jtag.c new file mode 100644 index 0000000..966307f --- /dev/null +++ b/boards/ek-tm4c123gxl/gpio_jtag/gpio_jtag.c @@ -0,0 +1,316 @@ +//*****************************************************************************
+//
+// gpio_jtag.c - Example to demonstrate recovering the JTAG interface.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "inc/hw_gpio.h"
+#include "inc/hw_ints.h"
+#include "inc/hw_memmap.h"
+#include "inc/hw_types.h"
+#include "driverlib/debug.h"
+#include "driverlib/fpu.h"
+#include "driverlib/gpio.h"
+#include "driverlib/interrupt.h"
+#include "driverlib/pin_map.h"
+#include "driverlib/rom.h"
+#include "driverlib/sysctl.h"
+#include "driverlib/systick.h"
+#include "driverlib/uart.h"
+#include "utils/uartstdio.h"
+#include "drivers/buttons.h"
+
+//*****************************************************************************
+//
+//! \addtogroup example_list
+//! <h1>GPIO JTAG Recovery (gpio_jtag)</h1>
+//!
+//! This example demonstrates changing the JTAG pins into GPIOs, aint32_t with a
+//! mechanism to revert them to JTAG pins. When first run, the pins remain in
+//! JTAG mode. Pressing the left button will toggle the pins between JTAG mode
+//! and GPIO mode. Because there is no debouncing of the push button (either
+//! in hardware or software), a button press will occasionally result in more
+//! than one mode change.
+//!
+//! In this example, four pins (PC0, PC1, PC2, and PC3) are switched.
+//!
+//! UART0, connected to the ICDI virtual COM port and running at 115,200,
+//! 8-N-1, is used to display messages from this application.
+//
+//*****************************************************************************
+
+
+//*****************************************************************************
+//
+// The current mode of pins PC0, PC1, PC2, and PC3. When zero, the pins
+// are in JTAG mode; when non-zero, the pins are in GPIO mode.
+//
+//*****************************************************************************
+volatile uint32_t g_ui32Mode;
+
+//*****************************************************************************
+//
+// The error routine that is called if the driver library encounters an error.
+//
+//*****************************************************************************
+#ifdef DEBUG
+void
+__error__(char *pcFilename, uint32_t ui32Line)
+{
+}
+#endif
+
+//*****************************************************************************
+//
+// The interrupt handler for the PB4 pin interrupt. When triggered, this will
+// toggle the JTAG pins between JTAG and GPIO mode.
+//
+//*****************************************************************************
+void
+SysTickIntHandler(void)
+{
+ uint8_t ui8Buttons;
+ uint8_t ui8ButtonsChanged;
+
+ //
+ // Grab the current, debounced state of the buttons.
+ //
+ ui8Buttons = ButtonsPoll(&ui8ButtonsChanged, 0);
+
+ //
+ // If the left button has been pressed, and was previously not pressed,
+ // start the process of changing the behavior of the JTAG pins.
+ //
+ if(BUTTON_PRESSED(LEFT_BUTTON, ui8Buttons, ui8ButtonsChanged))
+ {
+ //
+ // Toggle the pin mode.
+ //
+ g_ui32Mode ^= 1;
+
+ //
+ // See if the pins should be in JTAG or GPIO mode.
+ //
+ if(g_ui32Mode == 0)
+ {
+ //
+ // Change PC0-3 into hardware (i.e. JTAG) pins.
+ //
+ HWREG(GPIO_PORTC_BASE + GPIO_O_LOCK) = GPIO_LOCK_KEY;
+ HWREG(GPIO_PORTC_BASE + GPIO_O_CR) = 0x01;
+ HWREG(GPIO_PORTC_BASE + GPIO_O_AFSEL) |= 0x01;
+ HWREG(GPIO_PORTC_BASE + GPIO_O_LOCK) = GPIO_LOCK_KEY;
+ HWREG(GPIO_PORTC_BASE + GPIO_O_CR) = 0x02;
+ HWREG(GPIO_PORTC_BASE + GPIO_O_AFSEL) |= 0x02;
+ HWREG(GPIO_PORTC_BASE + GPIO_O_LOCK) = GPIO_LOCK_KEY;
+ HWREG(GPIO_PORTC_BASE + GPIO_O_CR) = 0x04;
+ HWREG(GPIO_PORTC_BASE + GPIO_O_AFSEL) |= 0x04;
+ HWREG(GPIO_PORTC_BASE + GPIO_O_LOCK) = GPIO_LOCK_KEY;
+ HWREG(GPIO_PORTC_BASE + GPIO_O_CR) = 0x08;
+ HWREG(GPIO_PORTC_BASE + GPIO_O_AFSEL) |= 0x08;
+ HWREG(GPIO_PORTC_BASE + GPIO_O_LOCK) = GPIO_LOCK_KEY;
+ HWREG(GPIO_PORTC_BASE + GPIO_O_CR) = 0x00;
+ HWREG(GPIO_PORTC_BASE + GPIO_O_LOCK) = 0;
+
+ //
+ // Turn on the LED to indicate that the pins are in JTAG mode.
+ //
+ ROM_GPIOPinWrite(GPIO_PORTF_BASE, GPIO_PIN_3 | GPIO_PIN_1,
+ GPIO_PIN_3);
+ }
+ else
+ {
+ //
+ // Change PC0-3 into GPIO inputs.
+ //
+ HWREG(GPIO_PORTC_BASE + GPIO_O_LOCK) = GPIO_LOCK_KEY;
+ HWREG(GPIO_PORTC_BASE + GPIO_O_CR) = 0x01;
+ HWREG(GPIO_PORTC_BASE + GPIO_O_AFSEL) &= 0xfe;
+ HWREG(GPIO_PORTC_BASE + GPIO_O_LOCK) = GPIO_LOCK_KEY;
+ HWREG(GPIO_PORTC_BASE + GPIO_O_CR) = 0x02;
+ HWREG(GPIO_PORTC_BASE + GPIO_O_AFSEL) &= 0xfd;
+ HWREG(GPIO_PORTC_BASE + GPIO_O_LOCK) = GPIO_LOCK_KEY;
+ HWREG(GPIO_PORTC_BASE + GPIO_O_CR) = 0x04;
+ HWREG(GPIO_PORTC_BASE + GPIO_O_AFSEL) &= 0xfb;
+ HWREG(GPIO_PORTC_BASE + GPIO_O_LOCK) = GPIO_LOCK_KEY;
+ HWREG(GPIO_PORTC_BASE + GPIO_O_CR) = 0x08;
+ HWREG(GPIO_PORTC_BASE + GPIO_O_AFSEL) &= 0xf7;
+ HWREG(GPIO_PORTC_BASE + GPIO_O_LOCK) = GPIO_LOCK_KEY;
+ HWREG(GPIO_PORTC_BASE + GPIO_O_CR) = 0x00;
+ HWREG(GPIO_PORTC_BASE + GPIO_O_LOCK) = 0;
+ ROM_GPIOPinTypeGPIOInput(GPIO_PORTC_BASE, (GPIO_PIN_0 | GPIO_PIN_1 |
+ GPIO_PIN_2 | GPIO_PIN_3));
+
+ //
+ // Turn off the LED to indicate that the pins are in GPIO mode.
+ //
+ ROM_GPIOPinWrite(GPIO_PORTF_BASE, GPIO_PIN_3 | GPIO_PIN_1,
+ GPIO_PIN_1);
+ }
+ }
+}
+
+//*****************************************************************************
+//
+// Configure the UART and its pins. This must be called before UARTprintf().
+//
+//*****************************************************************************
+void
+ConfigureUART(void)
+{
+ //
+ // Enable the GPIO Peripheral used by the UART.
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOA);
+
+ //
+ // Enable UART0
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_UART0);
+
+ //
+ // Configure GPIO Pins for UART mode.
+ //
+ ROM_GPIOPinConfigure(GPIO_PA0_U0RX);
+ ROM_GPIOPinConfigure(GPIO_PA1_U0TX);
+ ROM_GPIOPinTypeUART(GPIO_PORTA_BASE, GPIO_PIN_0 | GPIO_PIN_1);
+
+ //
+ // Use the internal 16MHz oscillator as the UART clock source.
+ //
+ UARTClockSourceSet(UART0_BASE, UART_CLOCK_PIOSC);
+
+ //
+ // Initialize the UART for console I/O.
+ //
+ UARTStdioConfig(0, 115200, 16000000);
+}
+
+//*****************************************************************************
+//
+// Toggle the JTAG pins between JTAG and GPIO mode with a push button selecting
+// between the two.
+//
+//*****************************************************************************
+int
+main(void)
+{
+ uint32_t ui32Mode;
+
+ //
+ // Enable lazy stacking for interrupt handlers. This allows floating-point
+ // instructions to be used within interrupt handlers, but at the expense of
+ // extra stack usage.
+ //
+ ROM_FPULazyStackingEnable();
+
+ //
+ // Set the clocking to run directly from the crystal.
+ //
+ ROM_SysCtlClockSet(SYSCTL_SYSDIV_4 | SYSCTL_USE_PLL | SYSCTL_XTAL_16MHZ |
+ SYSCTL_OSC_MAIN);
+
+ //
+ // Enable the peripherals used by this application.
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOA);
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOC);
+
+ //
+ // Initialize the button driver.
+ //
+ ButtonsInit();
+
+ //
+ // Set up a SysTick Interrupt to handle polling and debouncing for our
+ // buttons.
+ //
+ SysTickPeriodSet(SysCtlClockGet() / 100);
+ SysTickIntEnable();
+ SysTickEnable();
+
+ IntMasterEnable();
+
+ //
+ // Configure the LED as an output and turn it on.
+ //
+ ROM_GPIOPinTypeGPIOOutput(GPIO_PORTF_BASE, GPIO_PIN_3 | GPIO_PIN_1);
+ ROM_GPIOPinWrite(GPIO_PORTF_BASE, GPIO_PIN_3 | GPIO_PIN_1, GPIO_PIN_3);
+
+ //
+ // Set the global and local indicator of pin mode to zero, meaning JTAG.
+ //
+ g_ui32Mode = 0;
+ ui32Mode = 0;
+
+ //
+ // Initialize the UART.
+ //
+ ConfigureUART();
+
+ UARTprintf("\033[2JGPIO <-> JTAG\n");
+
+ //
+ // Indicate that the pins start out as JTAG.
+ //
+ UARTprintf("Pins are JTAG\n");
+
+ //
+ // Loop forever. This loop simply exists to display on the UART the
+ // current state of PC0-3; the handling of changing the JTAG pins to and
+ // from GPIO mode is done in GPIO Interrupt Handler.
+ //
+ while(1)
+ {
+ //
+ // Wait until the pin mode changes.
+ //
+ while(g_ui32Mode == ui32Mode)
+ {
+ }
+
+ //
+ // Save the new mode locally so that a subsequent pin mode change can
+ // be detected.
+ //
+ ui32Mode = g_ui32Mode;
+
+ //
+ // See what the new pin mode was changed to.
+ //
+ if(ui32Mode == 0)
+ {
+ //
+ // Indicate that PC0-3 are currently JTAG pins.
+ //
+ UARTprintf("Pins are JTAG\n");
+ }
+ else
+ {
+ //
+ // Indicate that PC0-3 are currently GPIO pins.
+ //
+ UARTprintf("Pins are GPIO\n");
+ }
+ }
+}
diff --git a/boards/ek-tm4c123gxl/gpio_jtag/gpio_jtag.ewd b/boards/ek-tm4c123gxl/gpio_jtag/gpio_jtag.ewd new file mode 100644 index 0000000..7a32408 --- /dev/null +++ b/boards/ek-tm4c123gxl/gpio_jtag/gpio_jtag.ewd @@ -0,0 +1,614 @@ +<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+ <fileVersion>1</fileVersion>
+ <configuration>
+ <name>Debug</name>
+ <toolchain>
+ <name>ARM</name>
+ </toolchain>
+ <debug>1</debug>
+ <settings>
+ <name>C-SPY</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>15</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CInput</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CEndian</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCVariant</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>MemOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MemFile</name>
+ <state>$TOOLKIT_DIR$\CONFIG\debugger\TexasInstruments\tm4c123gh6pm</state>
+ </option>
+ <option>
+ <name>RunToEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>RunToName</name>
+ <state>main</state>
+ </option>
+ <option>
+ <name>CExtraOptionsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCDDFArgumentProducer</name>
+ <state></state>
+ </option>
+ <option>
+ <name>OCDownloadSuppressDownload</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDownloadVerifyAll</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OCDynDriverList</name>
+ <state>LMIFTDI_ID</state>
+ </option>
+ <option>
+ <name>OCLastSavedByProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OCDownloadAttachToProgram</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FlashLoaders</name>
+ <state>,,,,(default),</state>
+ </option>
+ <option>
+ <name>UseFlashLoader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CLowLevel</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCBE8Slave</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ARMSIM_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCSimDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCSimEnablePSP</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCSimPspOverrideConfig</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCSimPspConfigFile</name>
+ <state></state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ANGEL_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CCAngelHeartbeat</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CAngelCommunication</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CAngelCommBaud</name>
+ <version>0</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>CAngelCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ANGELTCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoAngelLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AngelLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>GDBSERVER_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>TCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>LogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCJTagBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>IARROM_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CRomLogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomLogFileEditB</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CRomCommunication</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomCommBaud</name>
+ <version>0</version>
+ <state>7</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>JLINK_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>9</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>JLinkSpeed</name>
+ <state>32</state>
+ </option>
+ <option>
+ <name>CCJLinkDoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCJLinkHWResetDelay</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>JLinkInitialSpeed</name>
+ <state>32</state>
+ </option>
+ <option>
+ <name>CCDoJlinkMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCScanChainNonARMDevices</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkIRLength</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkCommRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkTCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>CCJLinkSpeedRadioV2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCUSBDevice</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchUndef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchSWI</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchData</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchPrefetch</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchIRQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchFIQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ <option>
+ <name>CCJLinkInterfaceRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCJLinkAttachSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCJLinkResetList</name>
+ <version>0</version>
+ <state>5</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>LMIFTDI_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>LmiftdiSpeed</name>
+ <state>500</state>
+ </option>
+ <option>
+ <name>CCLmiftdiDoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCLmiftdiLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>MACRAIGOR_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>2</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>jtag</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>EmuSpeed</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>TCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>LogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>DoEmuMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>EmuMultiTarget</name>
+ <state>0@ARM7TDMI</state>
+ </option>
+ <option>
+ <name>EmuHWReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CEmuCommBaud</name>
+ <version>0</version>
+ <state>4</state>
+ </option>
+ <option>
+ <name>CEmuCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>jtago</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>UnusedAddr</name>
+ <state>0x00800000</state>
+ </option>
+ <option>
+ <name>CCMacraigorHWResetDelay</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCJTagBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>RDI_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CRDIDriverDll</name>
+ <state>Browse to your RDI driver</state>
+ </option>
+ <option>
+ <name>CRDILogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRDILogFileEdit</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCRDIHWReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchUndef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchSWI</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchData</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchPrefetch</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchIRQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchFIQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDIUseETM</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>THIRDPARTY_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CThirdPartyDriverDll</name>
+ <state>Browse to your third-party driver</state>
+ </option>
+ <option>
+ <name>CThirdPartyLogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CThirdPartyLogFileEditB</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <debuggerPlugins>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\OSE\OseEpsilonPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Profiling\Profiling.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ </debuggerPlugins>
+ </configuration>
+</project>
diff --git a/boards/ek-tm4c123gxl/gpio_jtag/gpio_jtag.ewp b/boards/ek-tm4c123gxl/gpio_jtag/gpio_jtag.ewp new file mode 100644 index 0000000..3871352 --- /dev/null +++ b/boards/ek-tm4c123gxl/gpio_jtag/gpio_jtag.ewp @@ -0,0 +1,792 @@ +<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+ <fileVersion>1</fileVersion>
+ <configuration>
+ <name>Debug</name>
+ <toolchain>
+ <name>ARM</name>
+ </toolchain>
+ <debug>1</debug>
+ <settings>
+ <name>General</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <version>14</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>ExePath</name>
+ <state>ewarm\Exe</state>
+ </option>
+ <option>
+ <name>ObjPath</name>
+ <state>ewarm\Obj</state>
+ </option>
+ <option>
+ <name>ListPath</name>
+ <state>ewarm\List</state>
+ </option>
+ <option>
+ <name>Variant</name>
+ <version>19</version>
+ <state>39</state>
+ </option>
+ <option>
+ <name>GEndianMode</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>Input variant</name>
+ <version>1</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>Input description</name>
+ <state>No specifier n, no float nor long long, no scan set, no assignment suppressing.</state>
+ </option>
+ <option>
+ <name>Output variant</name>
+ <version>0</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>Output description</name>
+ <state>No specifier a, A, no specifier n, no float nor long long, no flags.</state>
+ </option>
+ <option>
+ <name>GOutputBinary</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FPU</name>
+ <version>2</version>
+ <state>5</state>
+ </option>
+ <option>
+ <name>OGCoreOrChip</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelect</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelectSlave</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>RTDescription</name>
+ <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+ </option>
+ <option>
+ <name>RTConfigPath</name>
+ <state>$TOOLKIT_DIR$\INC\DLib_Config_Normal.h</state>
+ </option>
+ <option>
+ <name>OGProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OGLastSavedByProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>GeneralMisraRules</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>GeneralEnableMisra</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GeneralMisraVerbose</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGChipSelectEditMenu</name>
+ <state>TM4C123GH6PM TexasInstruments TM4C123GH6PM</state>
+ </option>
+ <option>
+ <name>GenLowLevelInterface</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GEndianModeBE</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OGBufferedTerminalOutput</name>
+ <state>0</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ICCARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>19</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CCDefines</name>
+ <state>ewarm</state>
+ <state>PART_TM4C123GH6PM</state>
+ <state>TARGET_IS_TM4C123_RB1</state>
+ </option>
+ <option>
+ <name>CCPreprocFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocComments</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMnemonics</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMessages</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssSource</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagSuppress</name>
+ <state>Pa050</state>
+ </option>
+ <option>
+ <name>CCDiagRemark</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCDiagWarning</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCDiagError</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCAllowList</name>
+ <version>1</version>
+ <state>1111111</state>
+ </option>
+ <option>
+ <name>CCDebugInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IEndianMode</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IExtraOptionsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCLangConformance</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCSignedPlainChar</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCRequirePrototypes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagWarnAreErr</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCCompilerRuntimeInfo</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OutputFile</name>
+ <state>$FILE_BNAME$.o</state>
+ </option>
+ <option>
+ <name>CCLangSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCLibConfigHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>PreInclude</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CompilerMisraRules</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>CompilerMisraOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCIncludePath2</name>
+ <state>$PROJ_DIR$\..</state>
+ <state>$PROJ_DIR$\..\..\..\..</state>
+ </option>
+ <option>
+ <name>CCStdIncCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCStdIncludePath</name>
+ <state>$TOOLKIT_DIR$\INC\</state>
+ </option>
+ <option>
+ <name>CCCodeSection</name>
+ <state>.text</state>
+ </option>
+ <option>
+ <name>IInterwork2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IProcessorMode2</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptLevel</name>
+ <state>3</state>
+ </option>
+ <option>
+ <name>CCOptStrategy</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptLevelSlave</name>
+ <state>3</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>AARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>7</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>AObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AEndian</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>ACaseSensitivity</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacroChars</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnEnable</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnWhat</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnOne</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AWarnRange1</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AWarnRange2</name>
+ <state></state>
+ </option>
+ <option>
+ <name>ADebug</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AltRegisterNames</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ADefines</name>
+ <state>ewarm</state>
+ </option>
+ <option>
+ <name>AList</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AListHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AListing</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>Includes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacDefs</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacExps</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacExec</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OnlyAssed</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MultiLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLengthCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLength</name>
+ <state>80</state>
+ </option>
+ <option>
+ <name>TabSpacing</name>
+ <state>8</state>
+ </option>
+ <option>
+ <name>AXRef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDefines</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefInternal</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDual</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AOutputFile</name>
+ <state>$FILE_BNAME$.o</state>
+ </option>
+ <option>
+ <name>AMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ALimitErrorsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ALimitErrorsEdit</name>
+ <state>100</state>
+ </option>
+ <option>
+ <name>AIgnoreStdInclude</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AStdIncludes</name>
+ <state>$TOOLKIT_DIR$\INC\</state>
+ </option>
+ <option>
+ <name>AUserIncludes</name>
+ <state>$PROJ_DIR$\..</state>
+ <state>$PROJ_DIR$\..\..\..\..</state>
+ </option>
+ <option>
+ <name>AExtraOptionsCheckV2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AExtraOptionsV2</name>
+ <state></state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>OBJCOPY</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OOCOutputFormat</name>
+ <version>1</version>
+ <state>2</state>
+ </option>
+ <option>
+ <name>OCOutputOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OOCOutputFile</name>
+ <state>gpio_jtag.bin</state>
+ </option>
+ <option>
+ <name>OOCCommandLineProducer</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OOCObjCopyEnable</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>CUSTOM</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <extensions></extensions>
+ <cmdline></cmdline>
+ </data>
+ </settings>
+ <settings>
+ <name>BICOMP</name>
+ <archiveVersion>0</archiveVersion>
+ <data/>
+ </settings>
+ <settings>
+ <name>BUILDACTION</name>
+ <archiveVersion>1</archiveVersion>
+ <data>
+ <prebuild></prebuild>
+ <postbuild></postbuild>
+ </data>
+ </settings>
+ <settings>
+ <name>ILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>5</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>IlinkLibIOConfig</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>XLinkMisraHandler</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkInputFileSlave</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkOutputFile</name>
+ <state>gpio_jtag.out</state>
+ </option>
+ <option>
+ <name>IlinkDebugInfoEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkKeepSymbols</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinaryFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinarySymbol</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinarySegment</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinaryAlign</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkDefines</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkConfigDefines</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkMapFile</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkLogFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogInitialization</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogModule</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogSection</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogVeneer</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkIcfOverride</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkIcfFile</name>
+ <state>$PROJ_DIR$\gpio_jtag.icf</state>
+ </option>
+ <option>
+ <name>IlinkIcfFileSlave</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkSuppressDiags</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsRem</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsWarn</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsErr</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkWarningsAreErrors</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkUseExtraOptions</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkLowLevelInterfaceSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAutoLibEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAdditionalLibs</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkOverrideProgramEntryLabel</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabelSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabel</name>
+ <state>__iar_program_start</state>
+ </option>
+ <option>
+ <name>IlinkNXPLPCChecksum</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>DoFill</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FillerByte</name>
+ <state>0xFF</state>
+ </option>
+ <option>
+ <name>FillerStart</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>FillerEnd</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>CrcSize</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcAlign</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcAlgo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcPoly</name>
+ <state>0x11021</state>
+ </option>
+ <option>
+ <name>CrcCompl</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcBitOrder</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcInitialValue</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>DoCrc</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkBE8Slave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkBufferedTerminalOutput</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>IARCHIVE</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>IarchiveInputs</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IarchiveOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IarchiveOutput</name>
+ <state>###Unitialized###</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>BILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data/>
+ </settings>
+ </configuration>
+ <group>
+ <name>Libraries</name>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\driverlib\ewarm\Exe\driverlib.a</name>
+ </file>
+ </group>
+ <group>
+ <name>Source</name>
+ <file>
+ <name>$PROJ_DIR$\..\drivers\buttons.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\gpio_jtag.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\startup_ewarm.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\utils\uartstdio.c</name>
+ </file>
+ </group>
+</project>
diff --git a/boards/ek-tm4c123gxl/gpio_jtag/gpio_jtag.icf b/boards/ek-tm4c123gxl/gpio_jtag/gpio_jtag.icf new file mode 100644 index 0000000..7d26d1e --- /dev/null +++ b/boards/ek-tm4c123gxl/gpio_jtag/gpio_jtag.icf @@ -0,0 +1,78 @@ +//*****************************************************************************
+//
+// gpio_jtag.icf - Linker configuration file for gpio_jtag.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+//
+// Define a memory region that covers the entire 4 GB addressible space of the
+// processor.
+//
+define memory mem with size = 4G;
+
+//
+// Define a region for the on-chip flash.
+//
+define region FLASH = mem:[from 0x00000000 to 0x0003ffff];
+
+//
+// Define a region for the on-chip SRAM.
+//
+define region SRAM = mem:[from 0x20000000 to 0x20007fff];
+
+//
+// Define a block for the heap. The size should be set to something other
+// than zero if things in the C library that require the heap are used.
+//
+define block HEAP with alignment = 8, size = 0x00000000 { };
+
+//
+// Indicate that the read/write values should be initialized by copying from
+// flash.
+//
+initialize by copy { readwrite };
+
+//
+// Indicate that the noinit values should be left alone. This includes the
+// stack, which if initialized will destroy the return address from the
+// initialization code, causing the processor to branch to zero and fault.
+//
+do not initialize { section .noinit };
+
+//
+// Place the interrupt vectors at the start of flash.
+//
+place at start of FLASH { readonly section .intvec };
+
+//
+// Place the remainder of the read-only items into flash.
+//
+place in FLASH { readonly };
+
+//
+// Place the RAM vector table at the start of SRAM.
+//
+place at start of SRAM { section VTABLE };
+
+//
+// Place all read/write items into SRAM.
+//
+place in SRAM { readwrite, block HEAP };
diff --git a/boards/ek-tm4c123gxl/gpio_jtag/gpio_jtag.ld b/boards/ek-tm4c123gxl/gpio_jtag/gpio_jtag.ld new file mode 100644 index 0000000..e95c1db --- /dev/null +++ b/boards/ek-tm4c123gxl/gpio_jtag/gpio_jtag.ld @@ -0,0 +1,57 @@ +/******************************************************************************
+ *
+ * gpio_jtag.ld - Linker configuration file for gpio_jtag.
+ *
+ * Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+ * Software License Agreement
+ *
+ * Texas Instruments (TI) is supplying this software for use solely and
+ * exclusively on TI's microcontroller products. The software is owned by
+ * TI and/or its suppliers, and is protected under applicable copyright
+ * laws. You may not combine this software with "viral" open-source
+ * software in order to form a larger program.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+ * NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+ * NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+ * CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+ * DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ * This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+ *
+ *****************************************************************************/
+
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x00040000
+ SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000
+}
+
+SECTIONS
+{
+ .text :
+ {
+ _text = .;
+ KEEP(*(.isr_vector))
+ *(.text*)
+ *(.rodata*)
+ _etext = .;
+ } > FLASH
+
+ .data : AT(ADDR(.text) + SIZEOF(.text))
+ {
+ _data = .;
+ *(vtable)
+ *(.data*)
+ _edata = .;
+ } > SRAM
+
+ .bss :
+ {
+ _bss = .;
+ *(.bss*)
+ *(COMMON)
+ _ebss = .;
+ } > SRAM
+}
diff --git a/boards/ek-tm4c123gxl/gpio_jtag/gpio_jtag.sct b/boards/ek-tm4c123gxl/gpio_jtag/gpio_jtag.sct new file mode 100644 index 0000000..126215b --- /dev/null +++ b/boards/ek-tm4c123gxl/gpio_jtag/gpio_jtag.sct @@ -0,0 +1,47 @@ +;******************************************************************************
+;
+; gpio_jtag.sct - Linker configuration file for gpio_jtag.
+;
+; Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+; Software License Agreement
+;
+; Texas Instruments (TI) is supplying this software for use solely and
+; exclusively on TI's microcontroller products. The software is owned by
+; TI and/or its suppliers, and is protected under applicable copyright
+; laws. You may not combine this software with "viral" open-source
+; software in order to form a larger program.
+;
+; THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+; NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+; NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+; A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+; CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+; DAMAGES, FOR ANY REASON WHATSOEVER.
+;
+; This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+;
+;******************************************************************************
+
+LR_IROM 0x00000000 0x00040000
+{
+ ;
+ ; Specify the Execution Address of the code and the size.
+ ;
+ ER_IROM 0x00000000 0x00040000
+ {
+ *.o (RESET, +First)
+ * (InRoot$$Sections, +RO)
+ }
+
+ ;
+ ; Specify the Execution Address of the data area.
+ ;
+ RW_IRAM 0x20000000 0x00008000
+ {
+ ;
+ ; Uncomment the following line in order to use IntRegister().
+ ;
+ ;* (vtable, +First)
+ * (+RW, +ZI)
+ }
+}
diff --git a/boards/ek-tm4c123gxl/gpio_jtag/gpio_jtag.uvopt b/boards/ek-tm4c123gxl/gpio_jtag/gpio_jtag.uvopt new file mode 100644 index 0000000..b1f4bb5 --- /dev/null +++ b/boards/ek-tm4c123gxl/gpio_jtag/gpio_jtag.uvopt @@ -0,0 +1,317 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+ <SchemaVersion>1.0</SchemaVersion>
+
+ <Header>### uVision Project, (C) Keil Software</Header>
+
+ <Extensions>
+ <cExt>*.c</cExt>
+ <aExt>*.s*; *.src; *.a*</aExt>
+ <oExt>*.obj</oExt>
+ <lExt>*.lib</lExt>
+ <tExt>*.txt; *.h; *.inc</tExt>
+ <pExt>*.plm</pExt>
+ <CppX>*.cpp</CppX>
+ </Extensions>
+
+ <DaveTm>
+ <dwLowDateTime>0</dwLowDateTime>
+ <dwHighDateTime>0</dwHighDateTime>
+ </DaveTm>
+
+ <Target>
+ <TargetName>gpio_jtag</TargetName>
+ <ToolsetNumber>0x4</ToolsetNumber>
+ <ToolsetName>ARM-ADS</ToolsetName>
+ <TargetOption>
+ <CLKADS>8000000</CLKADS>
+ <OPTTT>
+ <gFlags>1</gFlags>
+ <BeepAtEnd>1</BeepAtEnd>
+ <RunSim>1</RunSim>
+ <RunTarget>0</RunTarget>
+ </OPTTT>
+ <OPTHX>
+ <HexSelection>1</HexSelection>
+ <FlashByte>65535</FlashByte>
+ <HexRangeLowAddress>0</HexRangeLowAddress>
+ <HexRangeHighAddress>0</HexRangeHighAddress>
+ <HexOffset>0</HexOffset>
+ </OPTHX>
+ <OPTLEX>
+ <PageWidth>79</PageWidth>
+ <PageLength>66</PageLength>
+ <TabStop>8</TabStop>
+ <ListingPath>.\rvmdk\</ListingPath>
+ </OPTLEX>
+ <ListingPage>
+ <CreateCListing>1</CreateCListing>
+ <CreateAListing>1</CreateAListing>
+ <CreateLListing>1</CreateLListing>
+ <CreateIListing>0</CreateIListing>
+ <AsmCond>1</AsmCond>
+ <AsmSymb>1</AsmSymb>
+ <AsmXref>0</AsmXref>
+ <CCond>1</CCond>
+ <CCode>0</CCode>
+ <CListInc>0</CListInc>
+ <CSymb>0</CSymb>
+ <LinkerCodeListing>0</LinkerCodeListing>
+ </ListingPage>
+ <OPTXL>
+ <LMap>1</LMap>
+ <LComments>1</LComments>
+ <LGenerateSymbols>1</LGenerateSymbols>
+ <LLibSym>1</LLibSym>
+ <LLines>1</LLines>
+ <LLocSym>1</LLocSym>
+ <LPubSym>1</LPubSym>
+ <LXref>0</LXref>
+ <LExpSel>0</LExpSel>
+ </OPTXL>
+ <OPTFL>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <IsCurrentTarget>1</IsCurrentTarget>
+ </OPTFL>
+ <CpuCode>255</CpuCode>
+ <Books>
+ <Book>
+ <Number>0</Number>
+ <Title>Data Sheet</Title>
+ <Path>DATASHTS\Luminary\TM4C123GH6PM.PDF</Path>
+ </Book>
+ </Books>
+ <DllOpt>
+ <SimDllName>SARMCM3.DLL</SimDllName>
+ <SimDllArguments>-MPU</SimDllArguments>
+ <SimDlgDllName>DCM.DLL</SimDlgDllName>
+ <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+ <TargetDllName>SARMCM3.DLL</TargetDllName>
+ <TargetDllArguments>-MPU</TargetDllArguments>
+ <TargetDlgDllName>TCM.DLL</TargetDlgDllName>
+ <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+ </DllOpt>
+ <DebugOpt>
+ <uSim>0</uSim>
+ <uTrg>1</uTrg>
+ <sLdApp>1</sLdApp>
+ <sGomain>1</sGomain>
+ <sRbreak>1</sRbreak>
+ <sRwatch>1</sRwatch>
+ <sRmem>1</sRmem>
+ <sRfunc>1</sRfunc>
+ <sRbox>1</sRbox>
+ <tLdApp>1</tLdApp>
+ <tGomain>0</tGomain>
+ <tRbreak>1</tRbreak>
+ <tRwatch>1</tRwatch>
+ <tRmem>1</tRmem>
+ <tRfunc>0</tRfunc>
+ <tRbox>1</tRbox>
+ <sRunDeb>0</sRunDeb>
+ <sLrtime>0</sLrtime>
+ <nTsel>4</nTsel>
+ <sDll></sDll>
+ <sDllPa></sDllPa>
+ <sDlgDll></sDlgDll>
+ <sDlgPa></sDlgPa>
+ <sIfile></sIfile>
+ <tDll></tDll>
+ <tDllPa></tDllPa>
+ <tDlgDll></tDlgDll>
+ <tDlgPa></tDlgPa>
+ <tIfile></tIfile>
+ <pMon>BIN\lmidk-agdi.dll</pMon>
+ </DebugOpt>
+ <TargetDriverDllRegistry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>lmidk-agdi</Key>
+ <Name>-O4614 -S3 -FO29</Name>
+ </SetRegEntry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>DLGTARM</Key>
+ <Name></Name>
+ </SetRegEntry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>ARMDBGFLAGS</Key>
+ <Name></Name>
+ </SetRegEntry>
+ </TargetDriverDllRegistry>
+ <DebugFlag>
+ <trace>0</trace>
+ <periodic>1</periodic>
+ <aLwin>0</aLwin>
+ <aCover>0</aCover>
+ <aSer1>0</aSer1>
+ <aSer2>0</aSer2>
+ <aPa>0</aPa>
+ <viewmode>1</viewmode>
+ <vrSel>0</vrSel>
+ <aSym>0</aSym>
+ <aTbox>0</aTbox>
+ <AscS1>0</AscS1>
+ <AscS2>0</AscS2>
+ <AscS3>0</AscS3>
+ <aSer3>0</aSer3>
+ <eProf>0</eProf>
+ <aLa>0</aLa>
+ <aPa1>0</aPa1>
+ <AscS4>0</AscS4>
+ <aSer4>0</aSer4>
+ <StkLoc>0</StkLoc>
+ <TrcWin>0</TrcWin>
+ <newCpu>0</newCpu>
+ <uProt>0</uProt>
+ </DebugFlag>
+ <LintExecutable></LintExecutable>
+ <LintConfigFile></LintConfigFile>
+ </TargetOption>
+ </Target>
+
+ <Group>
+ <GroupName>Source</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>1</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\drivers\buttons.c</PathWithFileName>
+ <FilenameWithoutPath>buttons.c</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>2</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\gpio_jtag.c</PathWithFileName>
+ <FilenameWithoutPath>gpio_jtag.c</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>3</FileNumber>
+ <FileType>2</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\startup_rvmdk.S</PathWithFileName>
+ <FilenameWithoutPath>startup_rvmdk.S</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>4</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\utils\uartstdio.c</PathWithFileName>
+ <FilenameWithoutPath>uartstdio.c</FilenameWithoutPath>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>Libraries</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>5</FileNumber>
+ <FileType>4</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\driverlib\rvmdk\driverlib.lib</PathWithFileName>
+ <FilenameWithoutPath>driverlib.lib</FilenameWithoutPath>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>Documentation</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>3</GroupNumber>
+ <FileNumber>6</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <Focus>1</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>1</TopLine>
+ <CurrentLine>1</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\readme.txt</PathWithFileName>
+ <FilenameWithoutPath>readme.txt</FilenameWithoutPath>
+ <WindowPosition>
+ <length>44</length>
+ <flags>0</flags>
+ <showCmd>1</showCmd>
+ <MinPosition>
+ <xPos>-1</xPos>
+ <yPos>-1</yPos>
+ </MinPosition>
+ <MaxPosition>
+ <xPos>-1</xPos>
+ <yPos>-1</yPos>
+ </MaxPosition>
+ <NormalPosition>
+ <Top>0</Top>
+ <Left>0</Left>
+ <Right>729</Right>
+ <Bottom>300</Bottom>
+ </NormalPosition>
+ </WindowPosition>
+ </File>
+ </Group>
+
+ <MDIGroups>
+ <Orientation>1</Orientation>
+ <ActiveMDIGroup>0</ActiveMDIGroup>
+ <MDIGroup>
+ <Size>100</Size>
+ <ActiveTab>0</ActiveTab>
+ <Documents>
+ <Doc>
+ <Name>.\readme.txt</Name>
+ <ColumnNumber>0</ColumnNumber>
+ <TopLine>1</TopLine>
+ <CurrentLine>1</CurrentLine>
+ </Doc>
+ </Documents>
+ </MDIGroup>
+ </MDIGroups>
+
+</ProjectOpt>
diff --git a/boards/ek-tm4c123gxl/gpio_jtag/gpio_jtag.uvproj b/boards/ek-tm4c123gxl/gpio_jtag/gpio_jtag.uvproj new file mode 100644 index 0000000..4c0e8e0 --- /dev/null +++ b/boards/ek-tm4c123gxl/gpio_jtag/gpio_jtag.uvproj @@ -0,0 +1,434 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+ <SchemaVersion>1.1</SchemaVersion>
+
+ <Header>### uVision Project, (C) Keil Software</Header>
+
+ <Targets>
+ <Target>
+ <TargetName>gpio_jtag</TargetName>
+ <ToolsetNumber>0x4</ToolsetNumber>
+ <ToolsetName>ARM-ADS</ToolsetName>
+ <TargetOption>
+ <TargetCommonOption>
+ <Device>TM4C123GH6PM</Device>
+ <Vendor>Texas Instruments</Vendor>
+ <Cpu>IRAM(0x20000000-0x20007FFF) IROM(0-0x3FFFF) CLOCK(8000000) CPUTYPE("Cortex-M4") FPU2</Cpu>
+ <FlashUtilSpec></FlashUtilSpec>
+ <StartupFile>"STARTUP\Luminary\Startup.s" ("Luminary Startup Code")</StartupFile>
+ <FlashDriverDll>UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0LM4F_256 -FS00 -FL040000)</FlashDriverDll>
+ <DeviceId>5919</DeviceId>
+ <RegisterFile>LM4Fxxxx.H</RegisterFile>
+ <MemoryEnv></MemoryEnv>
+ <Cmp></Cmp>
+ <Asm></Asm>
+ <Linker></Linker>
+ <OHString></OHString>
+ <InfinionOptionDll></InfinionOptionDll>
+ <SLE66CMisc></SLE66CMisc>
+ <SLE66AMisc></SLE66AMisc>
+ <SLE66LinkerMisc></SLE66LinkerMisc>
+ <UseEnv>0</UseEnv>
+ <BinPath></BinPath>
+ <IncludePath></IncludePath>
+ <LibPath></LibPath>
+ <RegisterFilePath>Luminary\</RegisterFilePath>
+ <DBRegisterFilePath>Luminary\</DBRegisterFilePath>
+ <TargetStatus>
+ <Error>0</Error>
+ <ExitCodeStop>0</ExitCodeStop>
+ <ButtonStop>0</ButtonStop>
+ <NotGenerated>0</NotGenerated>
+ <InvalidFlash>1</InvalidFlash>
+ </TargetStatus>
+ <OutputDirectory>.\rvmdk\</OutputDirectory>
+ <OutputName>gpio_jtag</OutputName>
+ <CreateExecutable>1</CreateExecutable>
+ <CreateLib>0</CreateLib>
+ <CreateHexFile>0</CreateHexFile>
+ <DebugInformation>1</DebugInformation>
+ <BrowseInformation>1</BrowseInformation>
+ <ListingPath>.\rvmdk\</ListingPath>
+ <HexFormatSelection>1</HexFormatSelection>
+ <Merge32K>0</Merge32K>
+ <CreateBatchFile>0</CreateBatchFile>
+ <BeforeCompile>
+ <RunUserProg1>0</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name></UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </BeforeCompile>
+ <BeforeMake>
+ <RunUserProg1>0</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name></UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </BeforeMake>
+ <AfterMake>
+ <RunUserProg1>1</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name>fromelf --bin --output .\rvmdk\gpio_jtag.bin .\rvmdk\gpio_jtag.axf</UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </AfterMake>
+ <SelectedForBatchBuild>0</SelectedForBatchBuild>
+ <SVCSIdString></SVCSIdString>
+ </TargetCommonOption>
+ <CommonProperty>
+ <UseCPPCompiler>0</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <DllOption>
+ <SimDllName>SARMCM3.DLL</SimDllName>
+ <SimDllArguments>-MPU</SimDllArguments>
+ <SimDlgDll>DCM.DLL</SimDlgDll>
+ <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+ <TargetDllName>SARMCM3.DLL</TargetDllName>
+ <TargetDllArguments>-MPU</TargetDllArguments>
+ <TargetDlgDll>TCM.DLL</TargetDlgDll>
+ <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+ </DllOption>
+ <DebugOption>
+ <OPTHX>
+ <HexSelection>1</HexSelection>
+ <HexRangeLowAddress>0</HexRangeLowAddress>
+ <HexRangeHighAddress>0</HexRangeHighAddress>
+ <HexOffset>0</HexOffset>
+ <Oh166RecLen>16</Oh166RecLen>
+ </OPTHX>
+ <Simulator>
+ <UseSimulator>0</UseSimulator>
+ <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+ <RunToMain>1</RunToMain>
+ <RestoreBreakpoints>1</RestoreBreakpoints>
+ <RestoreWatchpoints>1</RestoreWatchpoints>
+ <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+ <RestoreFunctions>1</RestoreFunctions>
+ <RestoreToolbox>1</RestoreToolbox>
+ <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+ </Simulator>
+ <Target>
+ <UseTarget>1</UseTarget>
+ <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+ <RunToMain>0</RunToMain>
+ <RestoreBreakpoints>1</RestoreBreakpoints>
+ <RestoreWatchpoints>1</RestoreWatchpoints>
+ <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+ <RestoreFunctions>0</RestoreFunctions>
+ <RestoreToolbox>1</RestoreToolbox>
+ </Target>
+ <RunDebugAfterBuild>0</RunDebugAfterBuild>
+ <TargetSelection>4</TargetSelection>
+ <SimDlls>
+ <CpuDll></CpuDll>
+ <CpuDllArguments></CpuDllArguments>
+ <PeripheralDll></PeripheralDll>
+ <PeripheralDllArguments></PeripheralDllArguments>
+ <InitializationFile></InitializationFile>
+ </SimDlls>
+ <TargetDlls>
+ <CpuDll></CpuDll>
+ <CpuDllArguments></CpuDllArguments>
+ <PeripheralDll></PeripheralDll>
+ <PeripheralDllArguments></PeripheralDllArguments>
+ <InitializationFile></InitializationFile>
+ <Driver>BIN\lmidk-agdi.dll</Driver>
+ </TargetDlls>
+ </DebugOption>
+ <Utilities>
+ <Flash1>
+ <UseTargetDll>1</UseTargetDll>
+ <UseExternalTool>0</UseExternalTool>
+ <RunIndependent>0</RunIndependent>
+ <UpdateFlashBeforeDebugging>0</UpdateFlashBeforeDebugging>
+ <Capability>1</Capability>
+ <DriverSelection>4099</DriverSelection>
+ </Flash1>
+ <Flash2>BIN\lmidk-agdi.dll</Flash2>
+ <Flash3></Flash3>
+ <Flash4></Flash4>
+ </Utilities>
+ <TargetArmAds>
+ <ArmAdsMisc>
+ <GenerateListings>0</GenerateListings>
+ <asHll>1</asHll>
+ <asAsm>1</asAsm>
+ <asMacX>1</asMacX>
+ <asSyms>1</asSyms>
+ <asFals>1</asFals>
+ <asDbgD>1</asDbgD>
+ <asForm>1</asForm>
+ <ldLst>0</ldLst>
+ <ldmm>1</ldmm>
+ <ldXref>1</ldXref>
+ <BigEnd>0</BigEnd>
+ <AdsALst>0</AdsALst>
+ <AdsACrf>0</AdsACrf>
+ <AdsANop>0</AdsANop>
+ <AdsANot>0</AdsANot>
+ <AdsLLst>1</AdsLLst>
+ <AdsLmap>1</AdsLmap>
+ <AdsLcgr>1</AdsLcgr>
+ <AdsLsym>1</AdsLsym>
+ <AdsLszi>1</AdsLszi>
+ <AdsLtoi>1</AdsLtoi>
+ <AdsLsun>1</AdsLsun>
+ <AdsLven>1</AdsLven>
+ <AdsLsxf>1</AdsLsxf>
+ <RvctClst>0</RvctClst>
+ <GenPPlst>0</GenPPlst>
+ <AdsCpuType>"Cortex-M4"</AdsCpuType>
+ <RvctDeviceName></RvctDeviceName>
+ <mOS>0</mOS>
+ <uocRom>0</uocRom>
+ <uocRam>0</uocRam>
+ <hadIROM>1</hadIROM>
+ <hadIRAM>1</hadIRAM>
+ <hadXRAM>0</hadXRAM>
+ <uocXRam>0</uocXRam>
+ <RvdsVP>2</RvdsVP>
+ <hadIRAM2>0</hadIRAM2>
+ <hadIROM2>0</hadIROM2>
+ <StupSel>8</StupSel>
+ <useUlib>1</useUlib>
+ <EndSel>0</EndSel>
+ <uLtcg>0</uLtcg>
+ <RoSelD>3</RoSelD>
+ <RwSelD>3</RwSelD>
+ <CodeSel>0</CodeSel>
+ <OptFeed>0</OptFeed>
+ <NoZi1>0</NoZi1>
+ <NoZi2>0</NoZi2>
+ <NoZi3>0</NoZi3>
+ <NoZi4>0</NoZi4>
+ <NoZi5>0</NoZi5>
+ <Ro1Chk>0</Ro1Chk>
+ <Ro2Chk>0</Ro2Chk>
+ <Ro3Chk>0</Ro3Chk>
+ <Ir1Chk>1</Ir1Chk>
+ <Ir2Chk>0</Ir2Chk>
+ <Ra1Chk>0</Ra1Chk>
+ <Ra2Chk>0</Ra2Chk>
+ <Ra3Chk>0</Ra3Chk>
+ <Im1Chk>1</Im1Chk>
+ <Im2Chk>0</Im2Chk>
+ <OnChipMemories>
+ <Ocm1>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm1>
+ <Ocm2>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm2>
+ <Ocm3>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm3>
+ <Ocm4>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm4>
+ <Ocm5>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm5>
+ <Ocm6>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm6>
+ <IRAM>
+ <Type>0</Type>
+ <StartAddress>0x20000000</StartAddress>
+ <Size>0x8000</Size>
+ </IRAM>
+ <IROM>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x40000</Size>
+ </IROM>
+ <XRAM>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </XRAM>
+ <OCR_RVCT1>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT1>
+ <OCR_RVCT2>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT2>
+ <OCR_RVCT3>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT3>
+ <OCR_RVCT4>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x40000</Size>
+ </OCR_RVCT4>
+ <OCR_RVCT5>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT5>
+ <OCR_RVCT6>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT6>
+ <OCR_RVCT7>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT7>
+ <OCR_RVCT8>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT8>
+ <OCR_RVCT9>
+ <Type>0</Type>
+ <StartAddress>0x20000000</StartAddress>
+ <Size>0x8000</Size>
+ </OCR_RVCT9>
+ <OCR_RVCT10>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT10>
+ </OnChipMemories>
+ <RvctStartVector></RvctStartVector>
+ </ArmAdsMisc>
+ <Cads>
+ <interw>0</interw>
+ <Optim>3</Optim>
+ <oTime>0</oTime>
+ <SplitLS>0</SplitLS>
+ <OneElfS>1</OneElfS>
+ <Strict>0</Strict>
+ <EnumInt>0</EnumInt>
+ <PlainCh>0</PlainCh>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <wLevel>2</wLevel>
+ <uThumb>0</uThumb>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define>rvmdk PART_TM4C123GH6PM TARGET_IS_TM4C123_RB1</Define>
+ <Undefine></Undefine>
+ <IncludePath>..;..\..\..\..;</IncludePath>
+ </VariousControls>
+ </Cads>
+ <Aads>
+ <interw>1</interw>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <thumb>0</thumb>
+ <SplitLS>0</SplitLS>
+ <SwStkChk>0</SwStkChk>
+ <NoWarn>0</NoWarn>
+ <VariousControls>
+ <MiscControls></MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Aads>
+ <LDads>
+ <umfTarg>0</umfTarg>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <noStLib>0</noStLib>
+ <RepFail>1</RepFail>
+ <useFile>0</useFile>
+ <TextAddressRange>0x00000000</TextAddressRange>
+ <DataAddressRange>0x20000000</DataAddressRange>
+ <ScatterFile>gpio_jtag.sct</ScatterFile>
+ <IncludeLibs></IncludeLibs>
+ <IncludeLibsPath></IncludeLibsPath>
+ <Misc>--entry Reset_Handler</Misc>
+ <LinkerInputFile></LinkerInputFile>
+ <DisabledWarnings></DisabledWarnings>
+ </LDads>
+ </TargetArmAds>
+ </TargetOption>
+ <Groups>
+ <Group>
+ <GroupName>Source</GroupName>
+ <Files>
+ <File>
+ <FileName>buttons.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>..\drivers\buttons.c</FilePath>
+ </File>
+ <File>
+ <FileName>gpio_jtag.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>.\gpio_jtag.c</FilePath>
+ </File>
+ <File>
+ <FileName>startup_rvmdk.S</FileName>
+ <FileType>2</FileType>
+ <FilePath>.\startup_rvmdk.S</FilePath>
+ </File>
+ <File>
+ <FileName>uartstdio.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>..\..\..\..\utils\uartstdio.c</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>Libraries</GroupName>
+ <Files>
+ <File>
+ <FileName>driverlib.lib</FileName>
+ <FileType>4</FileType>
+ <FilePath>..\..\..\..\driverlib\rvmdk\driverlib.lib</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>Documentation</GroupName>
+ <Files>
+ <File>
+ <FileName>readme.txt</FileName>
+ <FileType>5</FileType>
+ <FilePath>.\readme.txt</FilePath>
+ </File>
+ </Files>
+ </Group>
+ </Groups>
+ </Target>
+ </Targets>
+
+</Project>
diff --git a/boards/ek-tm4c123gxl/gpio_jtag/gpio_jtag_ccs.cmd b/boards/ek-tm4c123gxl/gpio_jtag/gpio_jtag_ccs.cmd new file mode 100644 index 0000000..13d49d9 --- /dev/null +++ b/boards/ek-tm4c123gxl/gpio_jtag/gpio_jtag_ccs.cmd @@ -0,0 +1,70 @@ +/******************************************************************************
+ *
+ * gpio_jtag_ccs.cmd - CCS linker configuration file for gpio_jtag.
+ *
+ * Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+ * Software License Agreement
+ *
+ * Texas Instruments (TI) is supplying this software for use solely and
+ * exclusively on TI's microcontroller products. The software is owned by
+ * TI and/or its suppliers, and is protected under applicable copyright
+ * laws. You may not combine this software with "viral" open-source
+ * software in order to form a larger program.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+ * NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+ * NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+ * CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+ * DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ * This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+ *
+ *****************************************************************************/
+
+--retain=g_pfnVectors
+
+/* The following command line options are set as part of the CCS project. */
+/* If you are building using the command line, or for some reason want to */
+/* define them here, you can uncomment and modify these lines as needed. */
+/* If you are using CCS for building, it is probably better to make any such */
+/* modifications in your CCS project and leave this file alone. */
+/* */
+/* --heap_size=0 */
+/* --stack_size=256 */
+/* --library=rtsv7M3_T_le_eabi.lib */
+
+/* The starting address of the application. Normally the interrupt vectors */
+/* must be located at the beginning of the application. */
+#define APP_BASE 0x00000000
+#define RAM_BASE 0x20000000
+
+/* System memory map */
+
+MEMORY
+{
+ /* Application stored in and executes from internal flash */
+ FLASH (RX) : origin = APP_BASE, length = 0x00040000
+ /* Application uses internal RAM for data */
+ SRAM (RWX) : origin = 0x20000000, length = 0x00008000
+}
+
+/* Section allocation in memory */
+
+SECTIONS
+{
+ .intvecs: > APP_BASE
+ .text : > FLASH
+ .const : > FLASH
+ .cinit : > FLASH
+ .pinit : > FLASH
+ .init_array : > FLASH
+
+ .vtable : > RAM_BASE
+ .data : > SRAM
+ .bss : > SRAM
+ .sysmem : > SRAM
+ .stack : > SRAM
+}
+
+__STACK_TOP = __stack + 256;
diff --git a/boards/ek-tm4c123gxl/gpio_jtag/readme.txt b/boards/ek-tm4c123gxl/gpio_jtag/readme.txt new file mode 100644 index 0000000..fa5fa5a --- /dev/null +++ b/boards/ek-tm4c123gxl/gpio_jtag/readme.txt @@ -0,0 +1,33 @@ +GPIO JTAG Recovery
+
+This example demonstrates changing the JTAG pins into GPIOs, aint32_t with a
+mechanism to revert them to JTAG pins. When first run, the pins remain in
+JTAG mode. Pressing the left button will toggle the pins between JTAG mode
+and GPIO mode. Because there is no debouncing of the push button (either
+in hardware or software), a button press will occasionally result in more
+than one mode change.
+
+In this example, four pins (PC0, PC1, PC2, and PC3) are switched.
+
+UART0, connected to the ICDI virtual COM port and running at 115,200,
+8-N-1, is used to display messages from this application.
+
+-------------------------------------------------------------------------------
+
+Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+Software License Agreement
+
+Texas Instruments (TI) is supplying this software for use solely and
+exclusively on TI's microcontroller products. The software is owned by
+TI and/or its suppliers, and is protected under applicable copyright
+laws. You may not combine this software with "viral" open-source
+software in order to form a larger program.
+
+THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+DAMAGES, FOR ANY REASON WHATSOEVER.
+
+This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
diff --git a/boards/ek-tm4c123gxl/gpio_jtag/rvmdk/gpio_jtag.axf b/boards/ek-tm4c123gxl/gpio_jtag/rvmdk/gpio_jtag.axf Binary files differnew file mode 100644 index 0000000..73ded3f --- /dev/null +++ b/boards/ek-tm4c123gxl/gpio_jtag/rvmdk/gpio_jtag.axf diff --git a/boards/ek-tm4c123gxl/gpio_jtag/rvmdk/gpio_jtag.bin b/boards/ek-tm4c123gxl/gpio_jtag/rvmdk/gpio_jtag.bin Binary files differnew file mode 100644 index 0000000..fda4449 --- /dev/null +++ b/boards/ek-tm4c123gxl/gpio_jtag/rvmdk/gpio_jtag.bin diff --git a/boards/ek-tm4c123gxl/gpio_jtag/startup_ccs.c b/boards/ek-tm4c123gxl/gpio_jtag/startup_ccs.c new file mode 100644 index 0000000..ff2d64c --- /dev/null +++ b/boards/ek-tm4c123gxl/gpio_jtag/startup_ccs.c @@ -0,0 +1,302 @@ +//*****************************************************************************
+//
+// startup_ccs.c - Startup code for use with TI's Code Composer Studio.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// External declaration for the reset handler that is to be called when the
+// processor is started
+//
+//*****************************************************************************
+extern void _c_int00(void);
+
+//*****************************************************************************
+//
+// Linker variable that marks the top of the stack.
+//
+//*****************************************************************************
+extern uint32_t __STACK_TOP;
+
+//*****************************************************************************
+//
+// External declaration for the interrupt handler used by the application.
+//
+//*****************************************************************************
+extern void SysTickIntHandler(void);
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000 or at the start of
+// the program if located at a start address other than 0.
+//
+//*****************************************************************************
+#pragma DATA_SECTION(g_pfnVectors, ".intvecs")
+void (* const g_pfnVectors[])(void) =
+{
+ (void (*)(void))((uint32_t)&__STACK_TOP),
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ SysTickIntHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ IntDefaultHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ IntDefaultHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ //
+ // Jump to the CCS C initialization routine. This will enable the
+ // floating-point unit as well, so that does not need to be done here.
+ //
+ __asm(" .global _c_int00\n"
+ " b.w _c_int00");
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/gpio_jtag/startup_ewarm.c b/boards/ek-tm4c123gxl/gpio_jtag/startup_ewarm.c new file mode 100644 index 0000000..9ca4ef2 --- /dev/null +++ b/boards/ek-tm4c123gxl/gpio_jtag/startup_ewarm.c @@ -0,0 +1,333 @@ +//*****************************************************************************
+//
+// startup_ewarm.c - Startup code for use with IAR's Embedded Workbench,
+// version 5.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Enable the IAR extensions for this source file.
+//
+//*****************************************************************************
+#pragma language=extended
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// External declaration for the interrupt handler used by the application.
+//
+//*****************************************************************************
+extern void SysTickIntHandler(void);
+
+//*****************************************************************************
+//
+// The entry point for the application startup code.
+//
+//*****************************************************************************
+extern void __iar_program_start(void);
+
+//*****************************************************************************
+//
+// Reserve space for the system stack.
+//
+//*****************************************************************************
+static uint32_t pui32Stack[64] @ ".noinit";
+
+//*****************************************************************************
+//
+// A union that describes the entries of the vector table. The union is needed
+// since the first entry is the stack pointer and the remainder are function
+// pointers.
+//
+//*****************************************************************************
+typedef union
+{
+ void (*pfnHandler)(void);
+ uint32_t ui32Ptr;
+}
+uVectorEntry;
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000.
+//
+//*****************************************************************************
+__root const uVectorEntry __vector_table[] @ ".intvec" =
+{
+ { .ui32Ptr = (uint32_t)pui32Stack + sizeof(pui32Stack) },
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ SysTickIntHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ IntDefaultHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ IntDefaultHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ //
+ // Enable the floating-point unit. This must be done here to handle the
+ // case where main() uses floating-point and the function prologue saves
+ // floating-point registers (which will fault if floating-point is not
+ // enabled). Any configuration of the floating-point unit using DriverLib
+ // APIs must be done here prior to the floating-point unit being enabled.
+ //
+ // Note that this does not use DriverLib since it might not be included in
+ // this project.
+ //
+ HWREG(NVIC_CPAC) = ((HWREG(NVIC_CPAC) &
+ ~(NVIC_CPAC_CP10_M | NVIC_CPAC_CP11_M)) |
+ NVIC_CPAC_CP10_FULL | NVIC_CPAC_CP11_FULL);
+
+ //
+ // Call the application's entry point.
+ //
+ __iar_program_start();
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/gpio_jtag/startup_gcc.c b/boards/ek-tm4c123gxl/gpio_jtag/startup_gcc.c new file mode 100644 index 0000000..e63cdb5 --- /dev/null +++ b/boards/ek-tm4c123gxl/gpio_jtag/startup_gcc.c @@ -0,0 +1,349 @@ +//*****************************************************************************
+//
+// startup_gcc.c - Startup code for use with GNU tools.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// External declaration for the interrupt handler used by the application.
+//
+//*****************************************************************************
+extern void SysTickIntHandler(void);
+
+//*****************************************************************************
+//
+// The entry point for the application.
+//
+//*****************************************************************************
+extern int main(void);
+
+//*****************************************************************************
+//
+// Reserve space for the system stack.
+//
+//*****************************************************************************
+static uint32_t pui32Stack[64];
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000.
+//
+//*****************************************************************************
+__attribute__ ((section(".isr_vector")))
+void (* const g_pfnVectors[])(void) =
+{
+ (void (*)(void))((uint32_t)pui32Stack + sizeof(pui32Stack)),
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ SysTickIntHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ IntDefaultHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ IntDefaultHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// The following are constructs created by the linker, indicating where the
+// the "data" and "bss" segments reside in memory. The initializers for the
+// for the "data" segment resides immediately following the "text" segment.
+//
+//*****************************************************************************
+extern uint32_t _etext;
+extern uint32_t _data;
+extern uint32_t _edata;
+extern uint32_t _bss;
+extern uint32_t _ebss;
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ uint32_t *pui32Src, *pui32Dest;
+
+ //
+ // Copy the data segment initializers from flash to SRAM.
+ //
+ pui32Src = &_etext;
+ for(pui32Dest = &_data; pui32Dest < &_edata; )
+ {
+ *pui32Dest++ = *pui32Src++;
+ }
+
+ //
+ // Zero fill the bss segment.
+ //
+ __asm(" ldr r0, =_bss\n"
+ " ldr r1, =_ebss\n"
+ " mov r2, #0\n"
+ " .thumb_func\n"
+ "zero_loop:\n"
+ " cmp r0, r1\n"
+ " it lt\n"
+ " strlt r2, [r0], #4\n"
+ " blt zero_loop");
+
+ //
+ // Enable the floating-point unit. This must be done here to handle the
+ // case where main() uses floating-point and the function prologue saves
+ // floating-point registers (which will fault if floating-point is not
+ // enabled). Any configuration of the floating-point unit using DriverLib
+ // APIs must be done here prior to the floating-point unit being enabled.
+ //
+ // Note that this does not use DriverLib since it might not be included in
+ // this project.
+ //
+ HWREG(NVIC_CPAC) = ((HWREG(NVIC_CPAC) &
+ ~(NVIC_CPAC_CP10_M | NVIC_CPAC_CP11_M)) |
+ NVIC_CPAC_CP10_FULL | NVIC_CPAC_CP11_FULL);
+
+ //
+ // Call the application's entry point.
+ //
+ main();
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/gpio_jtag/startup_rvmdk.S b/boards/ek-tm4c123gxl/gpio_jtag/startup_rvmdk.S new file mode 100644 index 0000000..7d46f86 --- /dev/null +++ b/boards/ek-tm4c123gxl/gpio_jtag/startup_rvmdk.S @@ -0,0 +1,358 @@ +; <<< Use Configuration Wizard in Context Menu >>>
+;******************************************************************************
+;
+; startup_rvmdk.S - Startup code for use with Keil's uVision.
+;
+; Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+; Software License Agreement
+;
+; Texas Instruments (TI) is supplying this software for use solely and
+; exclusively on TI's microcontroller products. The software is owned by
+; TI and/or its suppliers, and is protected under applicable copyright
+; laws. You may not combine this software with "viral" open-source
+; software in order to form a larger program.
+;
+; THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+; NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+; NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+; A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+; CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+; DAMAGES, FOR ANY REASON WHATSOEVER.
+;
+; This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+;
+;******************************************************************************
+
+;******************************************************************************
+;
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+;******************************************************************************
+Stack EQU 0x00000100
+
+;******************************************************************************
+;
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+;******************************************************************************
+Heap EQU 0x00000000
+
+;******************************************************************************
+;
+; Allocate space for the stack.
+;
+;******************************************************************************
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+StackMem
+ SPACE Stack
+__initial_sp
+
+;******************************************************************************
+;
+; Allocate space for the heap.
+;
+;******************************************************************************
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+HeapMem
+ SPACE Heap
+__heap_limit
+
+;******************************************************************************
+;
+; Indicate that the code in this file preserves 8-byte alignment of the stack.
+;
+;******************************************************************************
+ PRESERVE8
+
+;******************************************************************************
+;
+; Place code into the reset code section.
+;
+;******************************************************************************
+ AREA RESET, CODE, READONLY
+ THUMB
+
+;******************************************************************************
+;
+; External declaration for the interrupt handler used by the application.
+;
+;******************************************************************************
+ EXTERN SysTickIntHandler
+
+;******************************************************************************
+;
+; The vector table.
+;
+;******************************************************************************
+ EXPORT __Vectors
+__Vectors
+ DCD StackMem + Stack ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NmiSR ; NMI Handler
+ DCD FaultISR ; Hard Fault Handler
+ DCD IntDefaultHandler ; The MPU fault handler
+ DCD IntDefaultHandler ; The bus fault handler
+ DCD IntDefaultHandler ; The usage fault handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; SVCall handler
+ DCD IntDefaultHandler ; Debug monitor handler
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; The PendSV handler
+ DCD SysTickIntHandler ; The SysTick handler
+ DCD IntDefaultHandler ; GPIO Port A
+ DCD IntDefaultHandler ; GPIO Port B
+ DCD IntDefaultHandler ; GPIO Port C
+ DCD IntDefaultHandler ; GPIO Port D
+ DCD IntDefaultHandler ; GPIO Port E
+ DCD IntDefaultHandler ; UART0 Rx and Tx
+ DCD IntDefaultHandler ; UART1 Rx and Tx
+ DCD IntDefaultHandler ; SSI0 Rx and Tx
+ DCD IntDefaultHandler ; I2C0 Master and Slave
+ DCD IntDefaultHandler ; PWM Fault
+ DCD IntDefaultHandler ; PWM Generator 0
+ DCD IntDefaultHandler ; PWM Generator 1
+ DCD IntDefaultHandler ; PWM Generator 2
+ DCD IntDefaultHandler ; Quadrature Encoder 0
+ DCD IntDefaultHandler ; ADC Sequence 0
+ DCD IntDefaultHandler ; ADC Sequence 1
+ DCD IntDefaultHandler ; ADC Sequence 2
+ DCD IntDefaultHandler ; ADC Sequence 3
+ DCD IntDefaultHandler ; Watchdog timer
+ DCD IntDefaultHandler ; Timer 0 subtimer A
+ DCD IntDefaultHandler ; Timer 0 subtimer B
+ DCD IntDefaultHandler ; Timer 1 subtimer A
+ DCD IntDefaultHandler ; Timer 1 subtimer B
+ DCD IntDefaultHandler ; Timer 2 subtimer A
+ DCD IntDefaultHandler ; Timer 2 subtimer B
+ DCD IntDefaultHandler ; Analog Comparator 0
+ DCD IntDefaultHandler ; Analog Comparator 1
+ DCD IntDefaultHandler ; Analog Comparator 2
+ DCD IntDefaultHandler ; System Control (PLL, OSC, BO)
+ DCD IntDefaultHandler ; FLASH Control
+ DCD IntDefaultHandler ; GPIO Port F
+ DCD IntDefaultHandler ; GPIO Port G
+ DCD IntDefaultHandler ; GPIO Port H
+ DCD IntDefaultHandler ; UART2 Rx and Tx
+ DCD IntDefaultHandler ; SSI1 Rx and Tx
+ DCD IntDefaultHandler ; Timer 3 subtimer A
+ DCD IntDefaultHandler ; Timer 3 subtimer B
+ DCD IntDefaultHandler ; I2C1 Master and Slave
+ DCD IntDefaultHandler ; Quadrature Encoder 1
+ DCD IntDefaultHandler ; CAN0
+ DCD IntDefaultHandler ; CAN1
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; Hibernate
+ DCD IntDefaultHandler ; USB0
+ DCD IntDefaultHandler ; PWM Generator 3
+ DCD IntDefaultHandler ; uDMA Software Transfer
+ DCD IntDefaultHandler ; uDMA Error
+ DCD IntDefaultHandler ; ADC1 Sequence 0
+ DCD IntDefaultHandler ; ADC1 Sequence 1
+ DCD IntDefaultHandler ; ADC1 Sequence 2
+ DCD IntDefaultHandler ; ADC1 Sequence 3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; GPIO Port J
+ DCD IntDefaultHandler ; GPIO Port K
+ DCD IntDefaultHandler ; GPIO Port L
+ DCD IntDefaultHandler ; SSI2 Rx and Tx
+ DCD IntDefaultHandler ; SSI3 Rx and Tx
+ DCD IntDefaultHandler ; UART3 Rx and Tx
+ DCD IntDefaultHandler ; UART4 Rx and Tx
+ DCD IntDefaultHandler ; UART5 Rx and Tx
+ DCD IntDefaultHandler ; UART6 Rx and Tx
+ DCD IntDefaultHandler ; UART7 Rx and Tx
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; I2C2 Master and Slave
+ DCD IntDefaultHandler ; I2C3 Master and Slave
+ DCD IntDefaultHandler ; Timer 4 subtimer A
+ DCD IntDefaultHandler ; Timer 4 subtimer B
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; Timer 5 subtimer A
+ DCD IntDefaultHandler ; Timer 5 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 0 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 0 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 1 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 1 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 2 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 2 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 3 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 3 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 4 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 4 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 5 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 5 subtimer B
+ DCD IntDefaultHandler ; FPU
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; I2C4 Master and Slave
+ DCD IntDefaultHandler ; I2C5 Master and Slave
+ DCD IntDefaultHandler ; GPIO Port M
+ DCD IntDefaultHandler ; GPIO Port N
+ DCD IntDefaultHandler ; Quadrature Encoder 2
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; GPIO Port P (Summary or P0)
+ DCD IntDefaultHandler ; GPIO Port P1
+ DCD IntDefaultHandler ; GPIO Port P2
+ DCD IntDefaultHandler ; GPIO Port P3
+ DCD IntDefaultHandler ; GPIO Port P4
+ DCD IntDefaultHandler ; GPIO Port P5
+ DCD IntDefaultHandler ; GPIO Port P6
+ DCD IntDefaultHandler ; GPIO Port P7
+ DCD IntDefaultHandler ; GPIO Port Q (Summary or Q0)
+ DCD IntDefaultHandler ; GPIO Port Q1
+ DCD IntDefaultHandler ; GPIO Port Q2
+ DCD IntDefaultHandler ; GPIO Port Q3
+ DCD IntDefaultHandler ; GPIO Port Q4
+ DCD IntDefaultHandler ; GPIO Port Q5
+ DCD IntDefaultHandler ; GPIO Port Q6
+ DCD IntDefaultHandler ; GPIO Port Q7
+ DCD IntDefaultHandler ; GPIO Port R
+ DCD IntDefaultHandler ; GPIO Port S
+ DCD IntDefaultHandler ; PWM 1 Generator 0
+ DCD IntDefaultHandler ; PWM 1 Generator 1
+ DCD IntDefaultHandler ; PWM 1 Generator 2
+ DCD IntDefaultHandler ; PWM 1 Generator 3
+ DCD IntDefaultHandler ; PWM 1 Fault
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor first starts execution
+; following a reset event.
+;
+;******************************************************************************
+ EXPORT Reset_Handler
+Reset_Handler
+ ;
+ ; Enable the floating-point unit. This must be done here to handle the
+ ; case where main() uses floating-point and the function prologue saves
+ ; floating-point registers (which will fault if floating-point is not
+ ; enabled). Any configuration of the floating-point unit using
+ ; DriverLib APIs must be done here prior to the floating-point unit
+ ; being enabled.
+ ;
+ ; Note that this does not use DriverLib since it might not be included
+ ; in this project.
+ ;
+ MOVW R0, #0xED88
+ MOVT R0, #0xE000
+ LDR R1, [R0]
+ ORR R1, #0x00F00000
+ STR R1, [R0]
+
+ ;
+ ; Call the C library enty point that handles startup. This will copy
+ ; the .data section initializers from flash to SRAM and zero fill the
+ ; .bss section.
+ ;
+ IMPORT __main
+ B __main
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives a NMI. This
+; simply enters an infinite loop, preserving the system state for examination
+; by a debugger.
+;
+;******************************************************************************
+NmiSR
+ B NmiSR
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives a fault
+; interrupt. This simply enters an infinite loop, preserving the system state
+; for examination by a debugger.
+;
+;******************************************************************************
+FaultISR
+ B FaultISR
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives an unexpected
+; interrupt. This simply enters an infinite loop, preserving the system state
+; for examination by a debugger.
+;
+;******************************************************************************
+IntDefaultHandler
+ B IntDefaultHandler
+
+;******************************************************************************
+;
+; Make sure the end of this section is aligned.
+;
+;******************************************************************************
+ ALIGN
+
+;******************************************************************************
+;
+; Some code in the normal code section for initializing the heap and stack.
+;
+;******************************************************************************
+ AREA |.text|, CODE, READONLY
+
+;******************************************************************************
+;
+; The function expected of the C library startup code for defining the stack
+; and heap memory locations. For the C library version of the startup code,
+; provide this function so that the C library initialization code can find out
+; the location of the stack and heap.
+;
+;******************************************************************************
+ IF :DEF: __MICROLIB
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+ ELSE
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+__user_initial_stackheap
+ LDR R0, =HeapMem
+ LDR R1, =(StackMem + Stack)
+ LDR R2, =(HeapMem + Heap)
+ LDR R3, =StackMem
+ BX LR
+ ENDIF
+
+;******************************************************************************
+;
+; Make sure the end of this section is aligned.
+;
+;******************************************************************************
+ ALIGN
+
+;******************************************************************************
+;
+; Tell the assembler that we're done.
+;
+;******************************************************************************
+ END
diff --git a/boards/ek-tm4c123gxl/hello/Makefile b/boards/ek-tm4c123gxl/hello/Makefile new file mode 100644 index 0000000..865cd2e --- /dev/null +++ b/boards/ek-tm4c123gxl/hello/Makefile @@ -0,0 +1,85 @@ +#******************************************************************************
+#
+# Makefile - Rules for building the hello example.
+#
+# Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+# Software License Agreement
+#
+# Texas Instruments (TI) is supplying this software for use solely and
+# exclusively on TI's microcontroller products. The software is owned by
+# TI and/or its suppliers, and is protected under applicable copyright
+# laws. You may not combine this software with "viral" open-source
+# software in order to form a larger program.
+#
+# THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+# NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+# NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+# CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+# DAMAGES, FOR ANY REASON WHATSOEVER.
+#
+# This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+#
+#******************************************************************************
+
+#
+# Defines the part type that this project uses.
+#
+PART=TM4C123GH6PM
+
+#
+# The base directory for TivaWare.
+#
+ROOT=../../../..
+
+#
+# Include the common make definitions.
+#
+include ${ROOT}/makedefs
+
+#
+# Where to find source files that do not live in this directory.
+#
+VPATH=../../../../utils
+
+#
+# Where to find header files that do not live in the source directory.
+#
+IPATH=../../../..
+
+#
+# The default rule, which causes the hello example to be built.
+#
+all: ${COMPILER}
+all: ${COMPILER}/hello.axf
+
+#
+# The rule to clean out all the build products.
+#
+clean:
+ @rm -rf ${COMPILER} ${wildcard *~}
+
+#
+# The rule to create the target directory.
+#
+${COMPILER}:
+ @mkdir -p ${COMPILER}
+
+#
+# Rules for building the hello example.
+#
+${COMPILER}/hello.axf: ${COMPILER}/hello.o
+${COMPILER}/hello.axf: ${COMPILER}/startup_${COMPILER}.o
+${COMPILER}/hello.axf: ${COMPILER}/uartstdio.o
+${COMPILER}/hello.axf: ${ROOT}/driverlib/${COMPILER}/libdriver.a
+${COMPILER}/hello.axf: hello.ld
+SCATTERgcc_hello=hello.ld
+ENTRY_hello=ResetISR
+CFLAGSgcc=-DTARGET_IS_TM4C123_RB1
+
+#
+# Include the automatically generated dependency files.
+#
+ifneq (${MAKECMDGOALS},clean)
+-include ${wildcard ${COMPILER}/*.d} __dummy__
+endif
diff --git a/boards/ek-tm4c123gxl/hello/ccs/.ccsimportspec b/boards/ek-tm4c123gxl/hello/ccs/.ccsimportspec new file mode 100644 index 0000000..77b03f5 --- /dev/null +++ b/boards/ek-tm4c123gxl/hello/ccs/.ccsimportspec @@ -0,0 +1,8 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<importSpec>
+ <source root="..">
+ <file name="hello.c"/>
+ <file regex=".*_ccs\.cmd"/>
+ <file name="startup_ccs.c"/>
+ </source>
+</importSpec>
diff --git a/boards/ek-tm4c123gxl/hello/ccs/.ccsproject b/boards/ek-tm4c123gxl/hello/ccs/.ccsproject new file mode 100644 index 0000000..75fb50e --- /dev/null +++ b/boards/ek-tm4c123gxl/hello/ccs/.ccsproject @@ -0,0 +1,10 @@ +<?xml version="1.0" encoding="UTF-8" ?>
+<?ccsproject version="1.0"?>
+<projectOptions>
+ <deviceVariant value="Cortex M.TM4C123GH6PM"/>
+ <deviceFamily value="TMS470"/>
+ <deviceEndianness value="little"/>
+ <codegenToolVersion value="5.0.4"/>
+ <isElfFormat value="true"/>
+ <rts value="libc.a"/>
+</projectOptions>
diff --git a/boards/ek-tm4c123gxl/hello/ccs/.cproject b/boards/ek-tm4c123gxl/hello/ccs/.cproject new file mode 100644 index 0000000..8bac62a --- /dev/null +++ b/boards/ek-tm4c123gxl/hello/ccs/.cproject @@ -0,0 +1,187 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+ <storageModule configRelations="2" moduleId="org.eclipse.cdt.core.settings">
+ <cconfiguration id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1938883630">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1938883630" moduleId="org.eclipse.cdt.core.settings" name="Debug">
+ <macros>
+ <stringMacro name="SW_ROOT" type="VALUE_PATH_DIR" value="${PROJECT_ROOT}/../../../../.."/>
+ </macros>
+ <externalSettings/>
+ <extensions>
+ <extension id="com.ti.ccstudio.binaryparser.CoffParser" point="org.eclipse.cdt.core.BinaryParser"/>
+ <extension id="com.ti.ccstudio.errorparser.CoffErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.LinkErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.AsmErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactExtension="out" artifactName="${ProjName}" buildProperties="" cleanCommand="${CG_CLEAN_CMD}" description="" id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1938883630" name="Debug" parent="com.ti.ccstudio.buildDefinitions.TMS470.Debug" postbuildStep=""${CCE_INSTALL_ROOT}/utils/tiobj2bin/tiobj2bin" "${BuildArtifactFileName}" "${BuildArtifactFileBaseName}.bin" "${CG_TOOL_ROOT}/bin/armofd" "${CG_TOOL_ROOT}/bin/armhex" "${CCE_INSTALL_ROOT}/utils/tiobj2bin/mkhex4bin"">
+ <folderInfo id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1938883630." name="/" resourcePath="">
+ <toolChain id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.DebugToolchain.60053504" name="TI Build Tools" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.DebugToolchain" targetTool="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug.1470593341">
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS.1862227267" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS" valueType="stringList">
+ <listOptionValue builtIn="false" value="DEVICE_CONFIGURATION_ID=Cortex M.TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="DEVICE_ENDIANNESS=little"/>
+ <listOptionValue builtIn="false" value="OUTPUT_FORMAT=ELF"/>
+ <listOptionValue builtIn="false" value="CCS_MBS_VERSION=5.1.0.01"/>
+ <listOptionValue builtIn="false" value="RUNTIME_SUPPORT_LIBRARY=libc.a"/>
+ <listOptionValue builtIn="false" value="OUTPUT_TYPE=executable"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION.629885717" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION" value="5.0.4" valueType="string"/>
+ <targetPlatform id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformDebug.1174814995" name="Platform" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformDebug"/>
+ <builder buildPath="${BuildDirectory}" id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderDebug.22762729" name="GNU Make.Debug" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderDebug"/>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerDebug.1594743155" name="ARM Compiler" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerDebug">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.1190802036" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.7M4" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.1087445944" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.176343416" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.eabi" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.1078976581" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.FPv4SPD16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL.169510278" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL.SYMDEBUG__DWARF" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING.1675768755" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING" valueType="stringList">
+ <listOptionValue builtIn="false" value="225"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER.762975727" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.1284056711" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH.1466206315" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH" valueType="includePath">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN.960760149" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.748560155" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.on" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL.589803479" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL.2" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC.69150916" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL.891122554" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE.837673030" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE" valueType="definedSymbols">
+ <listOptionValue builtIn="false" value="ccs="ccs""/>
+ <listOptionValue builtIn="false" value="PART_TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="TARGET_IS_TM4C123_RB1"/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS.342635981" name="C Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS.1381074904" name="C++ Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS.494826202" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS.1653465774" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS"/>
+ </tool>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug.1470593341" name="ARM Linker" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE.1897480569" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE" value=""hello_ccs.map"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE.682102957" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE" value="512" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE.1237319828" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE" value="0" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE.1860759141" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE" value=""${ProjName}.out"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO.1766140713" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO" value=""${ProjName}_linkInfo.xml"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER.1934464656" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.333636453" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH.1974421146" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH" valueType="libPaths">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/lib""/>
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY.1552980102" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY" valueType="libs">
+ <listOptionValue builtIn="false" value=""libc.a""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/driverlib/ccs/Debug/driverlib.lib""/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS.456488133" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS.1586754775" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS.1867770245" name="Generated Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS"/>
+ </tool>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ <cconfiguration id="com.ti.ccstudio.buildDefinitions.TMS470.Release.1077809736">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.ti.ccstudio.buildDefinitions.TMS470.Release.1077809736" moduleId="org.eclipse.cdt.core.settings" name="Release">
+ <macros>
+ <stringMacro name="SW_ROOT" type="VALUE_PATH_DIR" value="${PROJECT_ROOT}/../../../../.."/>
+ </macros>
+ <externalSettings/>
+ <extensions>
+ <extension id="com.ti.ccstudio.binaryparser.CoffParser" point="org.eclipse.cdt.core.BinaryParser"/>
+ <extension id="com.ti.ccstudio.errorparser.CoffErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.LinkErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.AsmErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactExtension="out" artifactName="${ProjName}" buildProperties="" cleanCommand="${CG_CLEAN_CMD}" description="" id="com.ti.ccstudio.buildDefinitions.TMS470.Release.1077809736" name="Release" parent="com.ti.ccstudio.buildDefinitions.TMS470.Release" postbuildStep=""${CCE_INSTALL_ROOT}/utils/tiobj2bin/tiobj2bin" "${BuildArtifactFileName}" "${BuildArtifactFileBaseName}.bin" "${CG_TOOL_ROOT}/bin/armofd" "${CG_TOOL_ROOT}/bin/armhex" "${CCE_INSTALL_ROOT}/utils/tiobj2bin/mkhex4bin"">
+ <folderInfo id="com.ti.ccstudio.buildDefinitions.TMS470.Release.1077809736." name="/" resourcePath="">
+ <toolChain id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.ReleaseToolchain.1072648892" name="TI Build Tools" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.ReleaseToolchain" targetTool="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease.1691423335">
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS.1260686365" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS" valueType="stringList">
+ <listOptionValue builtIn="false" value="DEVICE_CONFIGURATION_ID=Cortex M.TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="DEVICE_ENDIANNESS=little"/>
+ <listOptionValue builtIn="false" value="OUTPUT_FORMAT=ELF"/>
+ <listOptionValue builtIn="false" value="CCS_MBS_VERSION=5.1.0.01"/>
+ <listOptionValue builtIn="false" value="RUNTIME_SUPPORT_LIBRARY=libc.a"/>
+ <listOptionValue builtIn="false" value="OUTPUT_TYPE=executable"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION.960038656" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION" value="5.0.4" valueType="string"/>
+ <targetPlatform id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformRelease.1658760722" name="Platform" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformRelease"/>
+ <builder buildPath="${BuildDirectory}" id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderRelease.2083197765" name="GNU Make.Release" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderRelease"/>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerRelease.1084521909" name="ARM Compiler" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerRelease">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.1719590608" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.7M4" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.307284925" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.130043387" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.eabi" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.873176799" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.FPv4SPD16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING.1340609195" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING" valueType="stringList">
+ <listOptionValue builtIn="false" value="225"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER.1451873564" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.1964952558" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH.1025377850" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH" valueType="includePath">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN.1383215129" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.1851465639" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.on" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC.1911179869" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL.1854212127" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE.1075658947" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE" valueType="definedSymbols">
+ <listOptionValue builtIn="false" value="ccs="ccs""/>
+ <listOptionValue builtIn="false" value="PART_TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="TARGET_IS_TM4C123_RB1"/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS.1846403483" name="C Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS.117549685" name="C++ Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS.481985911" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS.1567520530" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS"/>
+ </tool>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease.1691423335" name="ARM Linker" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE.181450769" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE" value=""hello_ccs.map"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE.1278862542" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE" value="512" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE.812735599" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE" value="0" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE.1591323667" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE" value=""${ProjName}.out"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO.1182243567" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO" value=""${ProjName}_linkInfo.xml"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER.748161813" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.1447065330" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH.1579850606" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH" valueType="libPaths">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/lib""/>
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY.1636745448" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY" valueType="libs">
+ <listOptionValue builtIn="false" value=""libc.a""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/driverlib/ccs/Debug/driverlib.lib""/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS.1661298987" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS.1587282811" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS.1347036500" name="Generated Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS"/>
+ </tool>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <project id="hello.com.ti.ccstudio.buildDefinitions.TMS470.ProjectType.1052307187" name="ARM" projectType="com.ti.ccstudio.buildDefinitions.TMS470.ProjectType"/>
+ </storageModule>
+ <storageModule moduleId="scannerConfiguration"/>
+ <storageModule moduleId="org.eclipse.cdt.core.language.mapping">
+ <project-mappings>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.asmSource" language="com.ti.ccstudio.core.TIASMLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cHeader" language="com.ti.ccstudio.core.TIGCCLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cSource" language="com.ti.ccstudio.core.TIGCCLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cxxHeader" language="com.ti.ccstudio.core.TIGPPLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cxxSource" language="com.ti.ccstudio.core.TIGPPLanguage"/>
+ </project-mappings>
+ </storageModule>
+</cproject>
diff --git a/boards/ek-tm4c123gxl/hello/ccs/.project b/boards/ek-tm4c123gxl/hello/ccs/.project new file mode 100644 index 0000000..340d14c --- /dev/null +++ b/boards/ek-tm4c123gxl/hello/ccs/.project @@ -0,0 +1,55 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+ <name>hello</name>
+ <comment></comment>
+ <projects>
+ </projects>
+ <buildSpec>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+ <triggers>full,incremental,</triggers>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ </buildSpec>
+ <natures>
+ <nature>com.ti.ccstudio.core.ccsNature</nature>
+ <nature>org.eclipse.cdt.core.cnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+ <nature>org.eclipse.cdt.core.ccnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+ </natures>
+ <linkedResources>
+ <link>
+ <name>hello.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/hello/hello.c</locationURI>
+ </link>
+ <link>
+ <name>hello_ccs.cmd</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/hello/hello_ccs.cmd</locationURI>
+ </link>
+ <link>
+ <name>startup_ccs.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/hello/startup_ccs.c</locationURI>
+ </link>
+ <link>
+ <name>utils/uartstdio.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/utils/uartstdio.c</locationURI>
+ </link>
+ </linkedResources>
+ <variableList>
+ <variable>
+ <name>SW_ROOT</name>
+ <value>$%7BPARENT-5-PROJECT_LOC%7D</value>
+ </variable>
+ </variableList>
+</projectDescription>
diff --git a/boards/ek-tm4c123gxl/hello/ccs/.settings/org.eclipse.cdt.codan.core.prefs b/boards/ek-tm4c123gxl/hello/ccs/.settings/org.eclipse.cdt.codan.core.prefs new file mode 100644 index 0000000..98b6350 --- /dev/null +++ b/boards/ek-tm4c123gxl/hello/ccs/.settings/org.eclipse.cdt.codan.core.prefs @@ -0,0 +1,3 @@ +eclipse.preferences.version=1
+inEditor=false
+onBuild=false
diff --git a/boards/ek-tm4c123gxl/hello/ccs/Debug/hello.bin b/boards/ek-tm4c123gxl/hello/ccs/Debug/hello.bin Binary files differnew file mode 100644 index 0000000..d8ddaee --- /dev/null +++ b/boards/ek-tm4c123gxl/hello/ccs/Debug/hello.bin diff --git a/boards/ek-tm4c123gxl/hello/ccs/Debug/hello.out b/boards/ek-tm4c123gxl/hello/ccs/Debug/hello.out Binary files differnew file mode 100644 index 0000000..ea90fa5 --- /dev/null +++ b/boards/ek-tm4c123gxl/hello/ccs/Debug/hello.out diff --git a/boards/ek-tm4c123gxl/hello/ccs/macros.ini_initial b/boards/ek-tm4c123gxl/hello/ccs/macros.ini_initial new file mode 100644 index 0000000..31214b5 --- /dev/null +++ b/boards/ek-tm4c123gxl/hello/ccs/macros.ini_initial @@ -0,0 +1 @@ +SW_ROOT = ../../../../..
diff --git a/boards/ek-tm4c123gxl/hello/ccs/target_config.ccxml b/boards/ek-tm4c123gxl/hello/ccs/target_config.ccxml new file mode 100644 index 0000000..be4342a --- /dev/null +++ b/boards/ek-tm4c123gxl/hello/ccs/target_config.ccxml @@ -0,0 +1,13 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<configurations XML_version="1.2" id="configurations_0">
+ <configuration XML_version="1.2" id="Stellaris In-Circuit Debug Interface_0">
+ <instance XML_version="1.2" desc="Stellaris In-Circuit Debug Interface_0" href="connections/Stellaris_ICDI_Connection.xml" id="Stellaris In-Circuit Debug Interface_0" xml="Stellaris_ICDI_Connection.xml" xmlpath="connections"/>
+ <connection XML_version="1.2" id="Stellaris In-Circuit Debug Interface_0">
+ <instance XML_version="1.2" href="drivers/stellaris_cs_dap.xml" id="drivers" xml="stellaris_cs_dap.xml" xmlpath="drivers"/>
+ <instance XML_version="1.2" href="drivers/stellaris_cortex_m4.xml" id="drivers" xml="stellaris_cortex_m4.xml" xmlpath="drivers"/>
+ <platform XML_version="1.2" id="platform_0">
+ <instance XML_version="1.2" desc="Stellaris TM4C123GH6PM_0" href="devices/tm4c123gh6pm.xml" id="Stellaris TM4C123GH6PM_0" xml="tm4c123gh6pm.xml" xmlpath="devices"/>
+ </platform>
+ </connection>
+ </configuration>
+</configurations>
diff --git a/boards/ek-tm4c123gxl/hello/ewarm/Exe/hello.bin b/boards/ek-tm4c123gxl/hello/ewarm/Exe/hello.bin Binary files differnew file mode 100644 index 0000000..7d3b7bb --- /dev/null +++ b/boards/ek-tm4c123gxl/hello/ewarm/Exe/hello.bin diff --git a/boards/ek-tm4c123gxl/hello/ewarm/Exe/hello.out b/boards/ek-tm4c123gxl/hello/ewarm/Exe/hello.out Binary files differnew file mode 100644 index 0000000..0b8323d --- /dev/null +++ b/boards/ek-tm4c123gxl/hello/ewarm/Exe/hello.out diff --git a/boards/ek-tm4c123gxl/hello/gcc/hello.axf b/boards/ek-tm4c123gxl/hello/gcc/hello.axf Binary files differnew file mode 100644 index 0000000..b01bdc8 --- /dev/null +++ b/boards/ek-tm4c123gxl/hello/gcc/hello.axf diff --git a/boards/ek-tm4c123gxl/hello/gcc/hello.bin b/boards/ek-tm4c123gxl/hello/gcc/hello.bin Binary files differnew file mode 100644 index 0000000..10fdf66 --- /dev/null +++ b/boards/ek-tm4c123gxl/hello/gcc/hello.bin diff --git a/boards/ek-tm4c123gxl/hello/hello.c b/boards/ek-tm4c123gxl/hello/hello.c new file mode 100644 index 0000000..7001b82 --- /dev/null +++ b/boards/ek-tm4c123gxl/hello/hello.c @@ -0,0 +1,167 @@ +//*****************************************************************************
+//
+// hello.c - Simple hello world example.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "inc/hw_memmap.h"
+#include "inc/hw_types.h"
+#include "driverlib/debug.h"
+#include "driverlib/fpu.h"
+#include "driverlib/gpio.h"
+#include "driverlib/pin_map.h"
+#include "driverlib/rom.h"
+#include "driverlib/sysctl.h"
+#include "driverlib/uart.h"
+#include "utils/uartstdio.h"
+
+//*****************************************************************************
+//
+//! \addtogroup example_list
+//! <h1>Hello World (hello)</h1>
+//!
+//! A very simple ``hello world'' example. It simply displays ``Hello World!''
+//! on the UART and is a starting point for more complicated applications.
+//!
+//! UART0, connected to the Virtual Serial Port and running at
+//! 115,200, 8-N-1, is used to display messages from this application.
+//
+//*****************************************************************************
+
+//*****************************************************************************
+//
+// The error routine that is called if the driver library encounters an error.
+//
+//*****************************************************************************
+#ifdef DEBUG
+void
+__error__(char *pcFilename, uint32_t ui32Line)
+{
+}
+#endif
+
+//*****************************************************************************
+//
+// Configure the UART and its pins. This must be called before UARTprintf().
+//
+//*****************************************************************************
+void
+ConfigureUART(void)
+{
+ //
+ // Enable the GPIO Peripheral used by the UART.
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOA);
+
+ //
+ // Enable UART0
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_UART0);
+
+ //
+ // Configure GPIO Pins for UART mode.
+ //
+ ROM_GPIOPinConfigure(GPIO_PA0_U0RX);
+ ROM_GPIOPinConfigure(GPIO_PA1_U0TX);
+ ROM_GPIOPinTypeUART(GPIO_PORTA_BASE, GPIO_PIN_0 | GPIO_PIN_1);
+
+ //
+ // Use the internal 16MHz oscillator as the UART clock source.
+ //
+ UARTClockSourceSet(UART0_BASE, UART_CLOCK_PIOSC);
+
+ //
+ // Initialize the UART for console I/O.
+ //
+ UARTStdioConfig(0, 115200, 16000000);
+}
+
+//*****************************************************************************
+//
+// Print "Hello World!" to the UART on the evaluation board.
+//
+//*****************************************************************************
+int
+main(void)
+{
+ //volatile uint32_t ui32Loop;
+
+ //
+ // Enable lazy stacking for interrupt handlers. This allows floating-point
+ // instructions to be used within interrupt handlers, but at the expense of
+ // extra stack usage.
+ //
+ ROM_FPULazyStackingEnable();
+
+ //
+ // Set the clocking to run directly from the crystal.
+ //
+ ROM_SysCtlClockSet(SYSCTL_SYSDIV_4 | SYSCTL_USE_PLL | SYSCTL_XTAL_16MHZ |
+ SYSCTL_OSC_MAIN);
+
+ //
+ // Enable the GPIO port that is used for the on-board LED.
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOF);
+
+ //
+ // Enable the GPIO pins for the LED (PF2 & PF3).
+ //
+ ROM_GPIOPinTypeGPIOOutput(GPIO_PORTF_BASE, GPIO_PIN_2);
+
+ //
+ // Initialize the UART.
+ //
+ ConfigureUART();
+
+ //
+ // Hello!
+ //
+ UARTprintf("Hello, world!\n");
+
+ //
+ // We are finished. Hang around doing nothing.
+ //
+ while(1)
+ {
+ //
+ // Turn on the BLUE LED.
+ //
+ GPIOPinWrite(GPIO_PORTF_BASE, GPIO_PIN_2, GPIO_PIN_2);
+
+ //
+ // Delay for a bit.
+ //
+ SysCtlDelay(SysCtlClockGet() / 10 / 3);
+
+ //
+ // Turn off the BLUE LED.
+ //
+ GPIOPinWrite(GPIO_PORTF_BASE, GPIO_PIN_2, 0);
+
+ //
+ // Delay for a bit.
+ //
+ SysCtlDelay(SysCtlClockGet() / 10 / 3);
+ }
+}
diff --git a/boards/ek-tm4c123gxl/hello/hello.ewd b/boards/ek-tm4c123gxl/hello/hello.ewd new file mode 100644 index 0000000..7a32408 --- /dev/null +++ b/boards/ek-tm4c123gxl/hello/hello.ewd @@ -0,0 +1,614 @@ +<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+ <fileVersion>1</fileVersion>
+ <configuration>
+ <name>Debug</name>
+ <toolchain>
+ <name>ARM</name>
+ </toolchain>
+ <debug>1</debug>
+ <settings>
+ <name>C-SPY</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>15</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CInput</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CEndian</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCVariant</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>MemOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MemFile</name>
+ <state>$TOOLKIT_DIR$\CONFIG\debugger\TexasInstruments\tm4c123gh6pm</state>
+ </option>
+ <option>
+ <name>RunToEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>RunToName</name>
+ <state>main</state>
+ </option>
+ <option>
+ <name>CExtraOptionsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCDDFArgumentProducer</name>
+ <state></state>
+ </option>
+ <option>
+ <name>OCDownloadSuppressDownload</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDownloadVerifyAll</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OCDynDriverList</name>
+ <state>LMIFTDI_ID</state>
+ </option>
+ <option>
+ <name>OCLastSavedByProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OCDownloadAttachToProgram</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FlashLoaders</name>
+ <state>,,,,(default),</state>
+ </option>
+ <option>
+ <name>UseFlashLoader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CLowLevel</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCBE8Slave</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ARMSIM_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCSimDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCSimEnablePSP</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCSimPspOverrideConfig</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCSimPspConfigFile</name>
+ <state></state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ANGEL_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CCAngelHeartbeat</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CAngelCommunication</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CAngelCommBaud</name>
+ <version>0</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>CAngelCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ANGELTCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoAngelLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AngelLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>GDBSERVER_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>TCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>LogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCJTagBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>IARROM_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CRomLogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomLogFileEditB</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CRomCommunication</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomCommBaud</name>
+ <version>0</version>
+ <state>7</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>JLINK_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>9</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>JLinkSpeed</name>
+ <state>32</state>
+ </option>
+ <option>
+ <name>CCJLinkDoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCJLinkHWResetDelay</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>JLinkInitialSpeed</name>
+ <state>32</state>
+ </option>
+ <option>
+ <name>CCDoJlinkMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCScanChainNonARMDevices</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkIRLength</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkCommRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkTCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>CCJLinkSpeedRadioV2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCUSBDevice</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchUndef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchSWI</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchData</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchPrefetch</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchIRQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchFIQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ <option>
+ <name>CCJLinkInterfaceRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCJLinkAttachSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCJLinkResetList</name>
+ <version>0</version>
+ <state>5</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>LMIFTDI_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>LmiftdiSpeed</name>
+ <state>500</state>
+ </option>
+ <option>
+ <name>CCLmiftdiDoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCLmiftdiLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>MACRAIGOR_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>2</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>jtag</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>EmuSpeed</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>TCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>LogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>DoEmuMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>EmuMultiTarget</name>
+ <state>0@ARM7TDMI</state>
+ </option>
+ <option>
+ <name>EmuHWReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CEmuCommBaud</name>
+ <version>0</version>
+ <state>4</state>
+ </option>
+ <option>
+ <name>CEmuCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>jtago</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>UnusedAddr</name>
+ <state>0x00800000</state>
+ </option>
+ <option>
+ <name>CCMacraigorHWResetDelay</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCJTagBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>RDI_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CRDIDriverDll</name>
+ <state>Browse to your RDI driver</state>
+ </option>
+ <option>
+ <name>CRDILogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRDILogFileEdit</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCRDIHWReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchUndef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchSWI</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchData</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchPrefetch</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchIRQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchFIQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDIUseETM</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>THIRDPARTY_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CThirdPartyDriverDll</name>
+ <state>Browse to your third-party driver</state>
+ </option>
+ <option>
+ <name>CThirdPartyLogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CThirdPartyLogFileEditB</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <debuggerPlugins>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\OSE\OseEpsilonPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Profiling\Profiling.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ </debuggerPlugins>
+ </configuration>
+</project>
diff --git a/boards/ek-tm4c123gxl/hello/hello.ewp b/boards/ek-tm4c123gxl/hello/hello.ewp new file mode 100644 index 0000000..7bae963 --- /dev/null +++ b/boards/ek-tm4c123gxl/hello/hello.ewp @@ -0,0 +1,787 @@ +<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+ <fileVersion>1</fileVersion>
+ <configuration>
+ <name>Debug</name>
+ <toolchain>
+ <name>ARM</name>
+ </toolchain>
+ <debug>1</debug>
+ <settings>
+ <name>General</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <version>14</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>ExePath</name>
+ <state>ewarm\Exe</state>
+ </option>
+ <option>
+ <name>ObjPath</name>
+ <state>ewarm\Obj</state>
+ </option>
+ <option>
+ <name>ListPath</name>
+ <state>ewarm\List</state>
+ </option>
+ <option>
+ <name>Variant</name>
+ <version>19</version>
+ <state>39</state>
+ </option>
+ <option>
+ <name>GEndianMode</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>Input variant</name>
+ <version>1</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>Input description</name>
+ <state>No specifier n, no float nor long long, no scan set, no assignment suppressing.</state>
+ </option>
+ <option>
+ <name>Output variant</name>
+ <version>0</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>Output description</name>
+ <state>No specifier a, A, no specifier n, no float nor long long, no flags.</state>
+ </option>
+ <option>
+ <name>GOutputBinary</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FPU</name>
+ <version>2</version>
+ <state>5</state>
+ </option>
+ <option>
+ <name>OGCoreOrChip</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelect</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelectSlave</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>RTDescription</name>
+ <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+ </option>
+ <option>
+ <name>RTConfigPath</name>
+ <state>$TOOLKIT_DIR$\INC\DLib_Config_Normal.h</state>
+ </option>
+ <option>
+ <name>OGProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OGLastSavedByProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>GeneralMisraRules</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>GeneralEnableMisra</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GeneralMisraVerbose</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGChipSelectEditMenu</name>
+ <state>TM4C123GH6PM TexasInstruments TM4C123GH6PM</state>
+ </option>
+ <option>
+ <name>GenLowLevelInterface</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GEndianModeBE</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OGBufferedTerminalOutput</name>
+ <state>0</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ICCARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>19</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CCDefines</name>
+ <state>ewarm</state>
+ <state>PART_TM4C123GH6PM</state>
+ <state>TARGET_IS_TM4C123_RB1</state>
+ </option>
+ <option>
+ <name>CCPreprocFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocComments</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMnemonics</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMessages</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssSource</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagSuppress</name>
+ <state>Pa050</state>
+ </option>
+ <option>
+ <name>CCDiagRemark</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCDiagWarning</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCDiagError</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCAllowList</name>
+ <version>1</version>
+ <state>1111111</state>
+ </option>
+ <option>
+ <name>CCDebugInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IEndianMode</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IExtraOptionsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCLangConformance</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCSignedPlainChar</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCRequirePrototypes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagWarnAreErr</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCCompilerRuntimeInfo</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OutputFile</name>
+ <state>$FILE_BNAME$.o</state>
+ </option>
+ <option>
+ <name>CCLangSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCLibConfigHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>PreInclude</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CompilerMisraRules</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>CompilerMisraOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCIncludePath2</name>
+ <state>$PROJ_DIR$\..\..\..\..</state>
+ </option>
+ <option>
+ <name>CCStdIncCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCStdIncludePath</name>
+ <state>$TOOLKIT_DIR$\INC\</state>
+ </option>
+ <option>
+ <name>CCCodeSection</name>
+ <state>.text</state>
+ </option>
+ <option>
+ <name>IInterwork2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IProcessorMode2</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptLevel</name>
+ <state>3</state>
+ </option>
+ <option>
+ <name>CCOptStrategy</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptLevelSlave</name>
+ <state>3</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>AARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>7</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>AObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AEndian</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>ACaseSensitivity</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacroChars</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnEnable</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnWhat</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnOne</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AWarnRange1</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AWarnRange2</name>
+ <state></state>
+ </option>
+ <option>
+ <name>ADebug</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AltRegisterNames</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ADefines</name>
+ <state>ewarm</state>
+ </option>
+ <option>
+ <name>AList</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AListHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AListing</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>Includes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacDefs</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacExps</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacExec</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OnlyAssed</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MultiLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLengthCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLength</name>
+ <state>80</state>
+ </option>
+ <option>
+ <name>TabSpacing</name>
+ <state>8</state>
+ </option>
+ <option>
+ <name>AXRef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDefines</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefInternal</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDual</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AOutputFile</name>
+ <state>$FILE_BNAME$.o</state>
+ </option>
+ <option>
+ <name>AMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ALimitErrorsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ALimitErrorsEdit</name>
+ <state>100</state>
+ </option>
+ <option>
+ <name>AIgnoreStdInclude</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AStdIncludes</name>
+ <state>$TOOLKIT_DIR$\INC\</state>
+ </option>
+ <option>
+ <name>AUserIncludes</name>
+ <state>$PROJ_DIR$\..\..\..\..</state>
+ </option>
+ <option>
+ <name>AExtraOptionsCheckV2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AExtraOptionsV2</name>
+ <state></state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>OBJCOPY</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OOCOutputFormat</name>
+ <version>1</version>
+ <state>2</state>
+ </option>
+ <option>
+ <name>OCOutputOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OOCOutputFile</name>
+ <state>hello.bin</state>
+ </option>
+ <option>
+ <name>OOCCommandLineProducer</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OOCObjCopyEnable</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>CUSTOM</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <extensions></extensions>
+ <cmdline></cmdline>
+ </data>
+ </settings>
+ <settings>
+ <name>BICOMP</name>
+ <archiveVersion>0</archiveVersion>
+ <data/>
+ </settings>
+ <settings>
+ <name>BUILDACTION</name>
+ <archiveVersion>1</archiveVersion>
+ <data>
+ <prebuild></prebuild>
+ <postbuild></postbuild>
+ </data>
+ </settings>
+ <settings>
+ <name>ILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>5</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>IlinkLibIOConfig</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>XLinkMisraHandler</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkInputFileSlave</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkOutputFile</name>
+ <state>hello.out</state>
+ </option>
+ <option>
+ <name>IlinkDebugInfoEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkKeepSymbols</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinaryFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinarySymbol</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinarySegment</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinaryAlign</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkDefines</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkConfigDefines</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkMapFile</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkLogFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogInitialization</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogModule</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogSection</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogVeneer</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkIcfOverride</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkIcfFile</name>
+ <state>$PROJ_DIR$\hello.icf</state>
+ </option>
+ <option>
+ <name>IlinkIcfFileSlave</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkSuppressDiags</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsRem</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsWarn</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsErr</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkWarningsAreErrors</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkUseExtraOptions</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkLowLevelInterfaceSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAutoLibEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAdditionalLibs</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkOverrideProgramEntryLabel</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabelSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabel</name>
+ <state>__iar_program_start</state>
+ </option>
+ <option>
+ <name>IlinkNXPLPCChecksum</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>DoFill</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FillerByte</name>
+ <state>0xFF</state>
+ </option>
+ <option>
+ <name>FillerStart</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>FillerEnd</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>CrcSize</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcAlign</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcAlgo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcPoly</name>
+ <state>0x11021</state>
+ </option>
+ <option>
+ <name>CrcCompl</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcBitOrder</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcInitialValue</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>DoCrc</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkBE8Slave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkBufferedTerminalOutput</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>IARCHIVE</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>IarchiveInputs</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IarchiveOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IarchiveOutput</name>
+ <state>###Unitialized###</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>BILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data/>
+ </settings>
+ </configuration>
+ <group>
+ <name>Libraries</name>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\driverlib\ewarm\Exe\driverlib.a</name>
+ </file>
+ </group>
+ <group>
+ <name>Source</name>
+ <file>
+ <name>$PROJ_DIR$\hello.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\startup_ewarm.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\utils\uartstdio.c</name>
+ </file>
+ </group>
+</project>
diff --git a/boards/ek-tm4c123gxl/hello/hello.icf b/boards/ek-tm4c123gxl/hello/hello.icf new file mode 100644 index 0000000..5a8a3d8 --- /dev/null +++ b/boards/ek-tm4c123gxl/hello/hello.icf @@ -0,0 +1,78 @@ +//*****************************************************************************
+//
+// hello.icf - Linker configuration file for hello.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+//
+// Define a memory region that covers the entire 4 GB addressible space of the
+// processor.
+//
+define memory mem with size = 4G;
+
+//
+// Define a region for the on-chip flash.
+//
+define region FLASH = mem:[from 0x00000000 to 0x0003ffff];
+
+//
+// Define a region for the on-chip SRAM.
+//
+define region SRAM = mem:[from 0x20000000 to 0x20007fff];
+
+//
+// Define a block for the heap. The size should be set to something other
+// than zero if things in the C library that require the heap are used.
+//
+define block HEAP with alignment = 8, size = 0x00000000 { };
+
+//
+// Indicate that the read/write values should be initialized by copying from
+// flash.
+//
+initialize by copy { readwrite };
+
+//
+// Indicate that the noinit values should be left alone. This includes the
+// stack, which if initialized will destroy the return address from the
+// initialization code, causing the processor to branch to zero and fault.
+//
+do not initialize { section .noinit };
+
+//
+// Place the interrupt vectors at the start of flash.
+//
+place at start of FLASH { readonly section .intvec };
+
+//
+// Place the remainder of the read-only items into flash.
+//
+place in FLASH { readonly };
+
+//
+// Place the RAM vector table at the start of SRAM.
+//
+place at start of SRAM { section VTABLE };
+
+//
+// Place all read/write items into SRAM.
+//
+place in SRAM { readwrite, block HEAP };
diff --git a/boards/ek-tm4c123gxl/hello/hello.ld b/boards/ek-tm4c123gxl/hello/hello.ld new file mode 100644 index 0000000..914ca07 --- /dev/null +++ b/boards/ek-tm4c123gxl/hello/hello.ld @@ -0,0 +1,57 @@ +/******************************************************************************
+ *
+ * hello.ld - Linker configuration file for hello.
+ *
+ * Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+ * Software License Agreement
+ *
+ * Texas Instruments (TI) is supplying this software for use solely and
+ * exclusively on TI's microcontroller products. The software is owned by
+ * TI and/or its suppliers, and is protected under applicable copyright
+ * laws. You may not combine this software with "viral" open-source
+ * software in order to form a larger program.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+ * NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+ * NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+ * CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+ * DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ * This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+ *
+ *****************************************************************************/
+
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x00040000
+ SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000
+}
+
+SECTIONS
+{
+ .text :
+ {
+ _text = .;
+ KEEP(*(.isr_vector))
+ *(.text*)
+ *(.rodata*)
+ _etext = .;
+ } > FLASH
+
+ .data : AT(ADDR(.text) + SIZEOF(.text))
+ {
+ _data = .;
+ *(vtable)
+ *(.data*)
+ _edata = .;
+ } > SRAM
+
+ .bss :
+ {
+ _bss = .;
+ *(.bss*)
+ *(COMMON)
+ _ebss = .;
+ } > SRAM
+}
diff --git a/boards/ek-tm4c123gxl/hello/hello.sct b/boards/ek-tm4c123gxl/hello/hello.sct new file mode 100644 index 0000000..605e6c8 --- /dev/null +++ b/boards/ek-tm4c123gxl/hello/hello.sct @@ -0,0 +1,47 @@ +;******************************************************************************
+;
+; hello.sct - Linker configuration file for hello.
+;
+; Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+; Software License Agreement
+;
+; Texas Instruments (TI) is supplying this software for use solely and
+; exclusively on TI's microcontroller products. The software is owned by
+; TI and/or its suppliers, and is protected under applicable copyright
+; laws. You may not combine this software with "viral" open-source
+; software in order to form a larger program.
+;
+; THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+; NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+; NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+; A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+; CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+; DAMAGES, FOR ANY REASON WHATSOEVER.
+;
+; This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+;
+;******************************************************************************
+
+LR_IROM 0x00000000 0x00040000
+{
+ ;
+ ; Specify the Execution Address of the code and the size.
+ ;
+ ER_IROM 0x00000000 0x00040000
+ {
+ *.o (RESET, +First)
+ * (InRoot$$Sections, +RO)
+ }
+
+ ;
+ ; Specify the Execution Address of the data area.
+ ;
+ RW_IRAM 0x20000000 0x00008000
+ {
+ ;
+ ; Uncomment the following line in order to use IntRegister().
+ ;
+ ;* (vtable, +First)
+ * (+RW, +ZI)
+ }
+}
diff --git a/boards/ek-tm4c123gxl/hello/hello.uvopt b/boards/ek-tm4c123gxl/hello/hello.uvopt new file mode 100644 index 0000000..4b32fc4 --- /dev/null +++ b/boards/ek-tm4c123gxl/hello/hello.uvopt @@ -0,0 +1,303 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+ <SchemaVersion>1.0</SchemaVersion>
+
+ <Header>### uVision Project, (C) Keil Software</Header>
+
+ <Extensions>
+ <cExt>*.c</cExt>
+ <aExt>*.s*; *.src; *.a*</aExt>
+ <oExt>*.obj</oExt>
+ <lExt>*.lib</lExt>
+ <tExt>*.txt; *.h; *.inc</tExt>
+ <pExt>*.plm</pExt>
+ <CppX>*.cpp</CppX>
+ </Extensions>
+
+ <DaveTm>
+ <dwLowDateTime>0</dwLowDateTime>
+ <dwHighDateTime>0</dwHighDateTime>
+ </DaveTm>
+
+ <Target>
+ <TargetName>hello</TargetName>
+ <ToolsetNumber>0x4</ToolsetNumber>
+ <ToolsetName>ARM-ADS</ToolsetName>
+ <TargetOption>
+ <CLKADS>8000000</CLKADS>
+ <OPTTT>
+ <gFlags>1</gFlags>
+ <BeepAtEnd>1</BeepAtEnd>
+ <RunSim>1</RunSim>
+ <RunTarget>0</RunTarget>
+ </OPTTT>
+ <OPTHX>
+ <HexSelection>1</HexSelection>
+ <FlashByte>65535</FlashByte>
+ <HexRangeLowAddress>0</HexRangeLowAddress>
+ <HexRangeHighAddress>0</HexRangeHighAddress>
+ <HexOffset>0</HexOffset>
+ </OPTHX>
+ <OPTLEX>
+ <PageWidth>79</PageWidth>
+ <PageLength>66</PageLength>
+ <TabStop>8</TabStop>
+ <ListingPath>.\rvmdk\</ListingPath>
+ </OPTLEX>
+ <ListingPage>
+ <CreateCListing>1</CreateCListing>
+ <CreateAListing>1</CreateAListing>
+ <CreateLListing>1</CreateLListing>
+ <CreateIListing>0</CreateIListing>
+ <AsmCond>1</AsmCond>
+ <AsmSymb>1</AsmSymb>
+ <AsmXref>0</AsmXref>
+ <CCond>1</CCond>
+ <CCode>0</CCode>
+ <CListInc>0</CListInc>
+ <CSymb>0</CSymb>
+ <LinkerCodeListing>0</LinkerCodeListing>
+ </ListingPage>
+ <OPTXL>
+ <LMap>1</LMap>
+ <LComments>1</LComments>
+ <LGenerateSymbols>1</LGenerateSymbols>
+ <LLibSym>1</LLibSym>
+ <LLines>1</LLines>
+ <LLocSym>1</LLocSym>
+ <LPubSym>1</LPubSym>
+ <LXref>0</LXref>
+ <LExpSel>0</LExpSel>
+ </OPTXL>
+ <OPTFL>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <IsCurrentTarget>1</IsCurrentTarget>
+ </OPTFL>
+ <CpuCode>255</CpuCode>
+ <Books>
+ <Book>
+ <Number>0</Number>
+ <Title>Data Sheet</Title>
+ <Path>DATASHTS\Luminary\TM4C123GH6PM.PDF</Path>
+ </Book>
+ </Books>
+ <DllOpt>
+ <SimDllName>SARMCM3.DLL</SimDllName>
+ <SimDllArguments>-MPU</SimDllArguments>
+ <SimDlgDllName>DCM.DLL</SimDlgDllName>
+ <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+ <TargetDllName>SARMCM3.DLL</TargetDllName>
+ <TargetDllArguments>-MPU</TargetDllArguments>
+ <TargetDlgDllName>TCM.DLL</TargetDlgDllName>
+ <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+ </DllOpt>
+ <DebugOpt>
+ <uSim>0</uSim>
+ <uTrg>1</uTrg>
+ <sLdApp>1</sLdApp>
+ <sGomain>1</sGomain>
+ <sRbreak>1</sRbreak>
+ <sRwatch>1</sRwatch>
+ <sRmem>1</sRmem>
+ <sRfunc>1</sRfunc>
+ <sRbox>1</sRbox>
+ <tLdApp>1</tLdApp>
+ <tGomain>0</tGomain>
+ <tRbreak>1</tRbreak>
+ <tRwatch>1</tRwatch>
+ <tRmem>1</tRmem>
+ <tRfunc>0</tRfunc>
+ <tRbox>1</tRbox>
+ <sRunDeb>0</sRunDeb>
+ <sLrtime>0</sLrtime>
+ <nTsel>4</nTsel>
+ <sDll></sDll>
+ <sDllPa></sDllPa>
+ <sDlgDll></sDlgDll>
+ <sDlgPa></sDlgPa>
+ <sIfile></sIfile>
+ <tDll></tDll>
+ <tDllPa></tDllPa>
+ <tDlgDll></tDlgDll>
+ <tDlgPa></tDlgPa>
+ <tIfile></tIfile>
+ <pMon>BIN\lmidk-agdi.dll</pMon>
+ </DebugOpt>
+ <TargetDriverDllRegistry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>lmidk-agdi</Key>
+ <Name>-O4614 -S3 -FO29</Name>
+ </SetRegEntry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>DLGTARM</Key>
+ <Name></Name>
+ </SetRegEntry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>ARMDBGFLAGS</Key>
+ <Name></Name>
+ </SetRegEntry>
+ </TargetDriverDllRegistry>
+ <DebugFlag>
+ <trace>0</trace>
+ <periodic>1</periodic>
+ <aLwin>0</aLwin>
+ <aCover>0</aCover>
+ <aSer1>0</aSer1>
+ <aSer2>0</aSer2>
+ <aPa>0</aPa>
+ <viewmode>1</viewmode>
+ <vrSel>0</vrSel>
+ <aSym>0</aSym>
+ <aTbox>0</aTbox>
+ <AscS1>0</AscS1>
+ <AscS2>0</AscS2>
+ <AscS3>0</AscS3>
+ <aSer3>0</aSer3>
+ <eProf>0</eProf>
+ <aLa>0</aLa>
+ <aPa1>0</aPa1>
+ <AscS4>0</AscS4>
+ <aSer4>0</aSer4>
+ <StkLoc>0</StkLoc>
+ <TrcWin>0</TrcWin>
+ <newCpu>0</newCpu>
+ <uProt>0</uProt>
+ </DebugFlag>
+ <LintExecutable></LintExecutable>
+ <LintConfigFile></LintConfigFile>
+ </TargetOption>
+ </Target>
+
+ <Group>
+ <GroupName>Source</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>1</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\hello.c</PathWithFileName>
+ <FilenameWithoutPath>hello.c</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>2</FileNumber>
+ <FileType>2</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\startup_rvmdk.S</PathWithFileName>
+ <FilenameWithoutPath>startup_rvmdk.S</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>3</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\utils\uartstdio.c</PathWithFileName>
+ <FilenameWithoutPath>uartstdio.c</FilenameWithoutPath>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>Libraries</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>4</FileNumber>
+ <FileType>4</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\driverlib\rvmdk\driverlib.lib</PathWithFileName>
+ <FilenameWithoutPath>driverlib.lib</FilenameWithoutPath>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>Documentation</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>3</GroupNumber>
+ <FileNumber>5</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <Focus>1</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>1</TopLine>
+ <CurrentLine>1</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\readme.txt</PathWithFileName>
+ <FilenameWithoutPath>readme.txt</FilenameWithoutPath>
+ <WindowPosition>
+ <length>44</length>
+ <flags>0</flags>
+ <showCmd>1</showCmd>
+ <MinPosition>
+ <xPos>-1</xPos>
+ <yPos>-1</yPos>
+ </MinPosition>
+ <MaxPosition>
+ <xPos>-1</xPos>
+ <yPos>-1</yPos>
+ </MaxPosition>
+ <NormalPosition>
+ <Top>0</Top>
+ <Left>0</Left>
+ <Right>729</Right>
+ <Bottom>300</Bottom>
+ </NormalPosition>
+ </WindowPosition>
+ </File>
+ </Group>
+
+ <MDIGroups>
+ <Orientation>1</Orientation>
+ <ActiveMDIGroup>0</ActiveMDIGroup>
+ <MDIGroup>
+ <Size>100</Size>
+ <ActiveTab>0</ActiveTab>
+ <Documents>
+ <Doc>
+ <Name>.\readme.txt</Name>
+ <ColumnNumber>0</ColumnNumber>
+ <TopLine>1</TopLine>
+ <CurrentLine>1</CurrentLine>
+ </Doc>
+ </Documents>
+ </MDIGroup>
+ </MDIGroups>
+
+</ProjectOpt>
diff --git a/boards/ek-tm4c123gxl/hello/hello.uvproj b/boards/ek-tm4c123gxl/hello/hello.uvproj new file mode 100644 index 0000000..cf58f75 --- /dev/null +++ b/boards/ek-tm4c123gxl/hello/hello.uvproj @@ -0,0 +1,429 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+ <SchemaVersion>1.1</SchemaVersion>
+
+ <Header>### uVision Project, (C) Keil Software</Header>
+
+ <Targets>
+ <Target>
+ <TargetName>hello</TargetName>
+ <ToolsetNumber>0x4</ToolsetNumber>
+ <ToolsetName>ARM-ADS</ToolsetName>
+ <TargetOption>
+ <TargetCommonOption>
+ <Device>TM4C123GH6PM</Device>
+ <Vendor>Texas Instruments</Vendor>
+ <Cpu>IRAM(0x20000000-0x20007FFF) IROM(0-0x3FFFF) CLOCK(8000000) CPUTYPE("Cortex-M4") FPU2</Cpu>
+ <FlashUtilSpec></FlashUtilSpec>
+ <StartupFile>"STARTUP\Luminary\Startup.s" ("Luminary Startup Code")</StartupFile>
+ <FlashDriverDll>UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0LM4F_256 -FS00 -FL040000)</FlashDriverDll>
+ <DeviceId>5919</DeviceId>
+ <RegisterFile>LM4Fxxxx.H</RegisterFile>
+ <MemoryEnv></MemoryEnv>
+ <Cmp></Cmp>
+ <Asm></Asm>
+ <Linker></Linker>
+ <OHString></OHString>
+ <InfinionOptionDll></InfinionOptionDll>
+ <SLE66CMisc></SLE66CMisc>
+ <SLE66AMisc></SLE66AMisc>
+ <SLE66LinkerMisc></SLE66LinkerMisc>
+ <UseEnv>0</UseEnv>
+ <BinPath></BinPath>
+ <IncludePath></IncludePath>
+ <LibPath></LibPath>
+ <RegisterFilePath>Luminary\</RegisterFilePath>
+ <DBRegisterFilePath>Luminary\</DBRegisterFilePath>
+ <TargetStatus>
+ <Error>0</Error>
+ <ExitCodeStop>0</ExitCodeStop>
+ <ButtonStop>0</ButtonStop>
+ <NotGenerated>0</NotGenerated>
+ <InvalidFlash>1</InvalidFlash>
+ </TargetStatus>
+ <OutputDirectory>.\rvmdk\</OutputDirectory>
+ <OutputName>hello</OutputName>
+ <CreateExecutable>1</CreateExecutable>
+ <CreateLib>0</CreateLib>
+ <CreateHexFile>0</CreateHexFile>
+ <DebugInformation>1</DebugInformation>
+ <BrowseInformation>1</BrowseInformation>
+ <ListingPath>.\rvmdk\</ListingPath>
+ <HexFormatSelection>1</HexFormatSelection>
+ <Merge32K>0</Merge32K>
+ <CreateBatchFile>0</CreateBatchFile>
+ <BeforeCompile>
+ <RunUserProg1>0</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name></UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </BeforeCompile>
+ <BeforeMake>
+ <RunUserProg1>0</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name></UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </BeforeMake>
+ <AfterMake>
+ <RunUserProg1>1</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name>fromelf --bin --output .\rvmdk\hello.bin .\rvmdk\hello.axf</UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </AfterMake>
+ <SelectedForBatchBuild>0</SelectedForBatchBuild>
+ <SVCSIdString></SVCSIdString>
+ </TargetCommonOption>
+ <CommonProperty>
+ <UseCPPCompiler>0</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <DllOption>
+ <SimDllName>SARMCM3.DLL</SimDllName>
+ <SimDllArguments>-MPU</SimDllArguments>
+ <SimDlgDll>DCM.DLL</SimDlgDll>
+ <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+ <TargetDllName>SARMCM3.DLL</TargetDllName>
+ <TargetDllArguments>-MPU</TargetDllArguments>
+ <TargetDlgDll>TCM.DLL</TargetDlgDll>
+ <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+ </DllOption>
+ <DebugOption>
+ <OPTHX>
+ <HexSelection>1</HexSelection>
+ <HexRangeLowAddress>0</HexRangeLowAddress>
+ <HexRangeHighAddress>0</HexRangeHighAddress>
+ <HexOffset>0</HexOffset>
+ <Oh166RecLen>16</Oh166RecLen>
+ </OPTHX>
+ <Simulator>
+ <UseSimulator>0</UseSimulator>
+ <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+ <RunToMain>1</RunToMain>
+ <RestoreBreakpoints>1</RestoreBreakpoints>
+ <RestoreWatchpoints>1</RestoreWatchpoints>
+ <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+ <RestoreFunctions>1</RestoreFunctions>
+ <RestoreToolbox>1</RestoreToolbox>
+ <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+ </Simulator>
+ <Target>
+ <UseTarget>1</UseTarget>
+ <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+ <RunToMain>0</RunToMain>
+ <RestoreBreakpoints>1</RestoreBreakpoints>
+ <RestoreWatchpoints>1</RestoreWatchpoints>
+ <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+ <RestoreFunctions>0</RestoreFunctions>
+ <RestoreToolbox>1</RestoreToolbox>
+ </Target>
+ <RunDebugAfterBuild>0</RunDebugAfterBuild>
+ <TargetSelection>4</TargetSelection>
+ <SimDlls>
+ <CpuDll></CpuDll>
+ <CpuDllArguments></CpuDllArguments>
+ <PeripheralDll></PeripheralDll>
+ <PeripheralDllArguments></PeripheralDllArguments>
+ <InitializationFile></InitializationFile>
+ </SimDlls>
+ <TargetDlls>
+ <CpuDll></CpuDll>
+ <CpuDllArguments></CpuDllArguments>
+ <PeripheralDll></PeripheralDll>
+ <PeripheralDllArguments></PeripheralDllArguments>
+ <InitializationFile></InitializationFile>
+ <Driver>BIN\lmidk-agdi.dll</Driver>
+ </TargetDlls>
+ </DebugOption>
+ <Utilities>
+ <Flash1>
+ <UseTargetDll>1</UseTargetDll>
+ <UseExternalTool>0</UseExternalTool>
+ <RunIndependent>0</RunIndependent>
+ <UpdateFlashBeforeDebugging>0</UpdateFlashBeforeDebugging>
+ <Capability>1</Capability>
+ <DriverSelection>4099</DriverSelection>
+ </Flash1>
+ <Flash2>BIN\lmidk-agdi.dll</Flash2>
+ <Flash3></Flash3>
+ <Flash4></Flash4>
+ </Utilities>
+ <TargetArmAds>
+ <ArmAdsMisc>
+ <GenerateListings>0</GenerateListings>
+ <asHll>1</asHll>
+ <asAsm>1</asAsm>
+ <asMacX>1</asMacX>
+ <asSyms>1</asSyms>
+ <asFals>1</asFals>
+ <asDbgD>1</asDbgD>
+ <asForm>1</asForm>
+ <ldLst>0</ldLst>
+ <ldmm>1</ldmm>
+ <ldXref>1</ldXref>
+ <BigEnd>0</BigEnd>
+ <AdsALst>0</AdsALst>
+ <AdsACrf>0</AdsACrf>
+ <AdsANop>0</AdsANop>
+ <AdsANot>0</AdsANot>
+ <AdsLLst>1</AdsLLst>
+ <AdsLmap>1</AdsLmap>
+ <AdsLcgr>1</AdsLcgr>
+ <AdsLsym>1</AdsLsym>
+ <AdsLszi>1</AdsLszi>
+ <AdsLtoi>1</AdsLtoi>
+ <AdsLsun>1</AdsLsun>
+ <AdsLven>1</AdsLven>
+ <AdsLsxf>1</AdsLsxf>
+ <RvctClst>0</RvctClst>
+ <GenPPlst>0</GenPPlst>
+ <AdsCpuType>"Cortex-M4"</AdsCpuType>
+ <RvctDeviceName></RvctDeviceName>
+ <mOS>0</mOS>
+ <uocRom>0</uocRom>
+ <uocRam>0</uocRam>
+ <hadIROM>1</hadIROM>
+ <hadIRAM>1</hadIRAM>
+ <hadXRAM>0</hadXRAM>
+ <uocXRam>0</uocXRam>
+ <RvdsVP>2</RvdsVP>
+ <hadIRAM2>0</hadIRAM2>
+ <hadIROM2>0</hadIROM2>
+ <StupSel>8</StupSel>
+ <useUlib>1</useUlib>
+ <EndSel>0</EndSel>
+ <uLtcg>0</uLtcg>
+ <RoSelD>3</RoSelD>
+ <RwSelD>3</RwSelD>
+ <CodeSel>0</CodeSel>
+ <OptFeed>0</OptFeed>
+ <NoZi1>0</NoZi1>
+ <NoZi2>0</NoZi2>
+ <NoZi3>0</NoZi3>
+ <NoZi4>0</NoZi4>
+ <NoZi5>0</NoZi5>
+ <Ro1Chk>0</Ro1Chk>
+ <Ro2Chk>0</Ro2Chk>
+ <Ro3Chk>0</Ro3Chk>
+ <Ir1Chk>1</Ir1Chk>
+ <Ir2Chk>0</Ir2Chk>
+ <Ra1Chk>0</Ra1Chk>
+ <Ra2Chk>0</Ra2Chk>
+ <Ra3Chk>0</Ra3Chk>
+ <Im1Chk>1</Im1Chk>
+ <Im2Chk>0</Im2Chk>
+ <OnChipMemories>
+ <Ocm1>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm1>
+ <Ocm2>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm2>
+ <Ocm3>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm3>
+ <Ocm4>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm4>
+ <Ocm5>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm5>
+ <Ocm6>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm6>
+ <IRAM>
+ <Type>0</Type>
+ <StartAddress>0x20000000</StartAddress>
+ <Size>0x8000</Size>
+ </IRAM>
+ <IROM>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x40000</Size>
+ </IROM>
+ <XRAM>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </XRAM>
+ <OCR_RVCT1>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT1>
+ <OCR_RVCT2>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT2>
+ <OCR_RVCT3>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT3>
+ <OCR_RVCT4>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x40000</Size>
+ </OCR_RVCT4>
+ <OCR_RVCT5>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT5>
+ <OCR_RVCT6>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT6>
+ <OCR_RVCT7>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT7>
+ <OCR_RVCT8>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT8>
+ <OCR_RVCT9>
+ <Type>0</Type>
+ <StartAddress>0x20000000</StartAddress>
+ <Size>0x8000</Size>
+ </OCR_RVCT9>
+ <OCR_RVCT10>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT10>
+ </OnChipMemories>
+ <RvctStartVector></RvctStartVector>
+ </ArmAdsMisc>
+ <Cads>
+ <interw>0</interw>
+ <Optim>3</Optim>
+ <oTime>0</oTime>
+ <SplitLS>0</SplitLS>
+ <OneElfS>1</OneElfS>
+ <Strict>0</Strict>
+ <EnumInt>0</EnumInt>
+ <PlainCh>0</PlainCh>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <wLevel>2</wLevel>
+ <uThumb>0</uThumb>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define>rvmdk PART_TM4C123GH6PM TARGET_IS_TM4C123_RB1</Define>
+ <Undefine></Undefine>
+ <IncludePath>..\..\..\..;</IncludePath>
+ </VariousControls>
+ </Cads>
+ <Aads>
+ <interw>1</interw>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <thumb>0</thumb>
+ <SplitLS>0</SplitLS>
+ <SwStkChk>0</SwStkChk>
+ <NoWarn>0</NoWarn>
+ <VariousControls>
+ <MiscControls></MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Aads>
+ <LDads>
+ <umfTarg>0</umfTarg>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <noStLib>0</noStLib>
+ <RepFail>1</RepFail>
+ <useFile>0</useFile>
+ <TextAddressRange>0x00000000</TextAddressRange>
+ <DataAddressRange>0x20000000</DataAddressRange>
+ <ScatterFile>hello.sct</ScatterFile>
+ <IncludeLibs></IncludeLibs>
+ <IncludeLibsPath></IncludeLibsPath>
+ <Misc>--entry Reset_Handler</Misc>
+ <LinkerInputFile></LinkerInputFile>
+ <DisabledWarnings></DisabledWarnings>
+ </LDads>
+ </TargetArmAds>
+ </TargetOption>
+ <Groups>
+ <Group>
+ <GroupName>Source</GroupName>
+ <Files>
+ <File>
+ <FileName>hello.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>.\hello.c</FilePath>
+ </File>
+ <File>
+ <FileName>startup_rvmdk.S</FileName>
+ <FileType>2</FileType>
+ <FilePath>.\startup_rvmdk.S</FilePath>
+ </File>
+ <File>
+ <FileName>uartstdio.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>..\..\..\..\utils\uartstdio.c</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>Libraries</GroupName>
+ <Files>
+ <File>
+ <FileName>driverlib.lib</FileName>
+ <FileType>4</FileType>
+ <FilePath>..\..\..\..\driverlib\rvmdk\driverlib.lib</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>Documentation</GroupName>
+ <Files>
+ <File>
+ <FileName>readme.txt</FileName>
+ <FileType>5</FileType>
+ <FilePath>.\readme.txt</FilePath>
+ </File>
+ </Files>
+ </Group>
+ </Groups>
+ </Target>
+ </Targets>
+
+</Project>
diff --git a/boards/ek-tm4c123gxl/hello/hello_ccs.cmd b/boards/ek-tm4c123gxl/hello/hello_ccs.cmd new file mode 100644 index 0000000..e18cbb7 --- /dev/null +++ b/boards/ek-tm4c123gxl/hello/hello_ccs.cmd @@ -0,0 +1,70 @@ +/******************************************************************************
+ *
+ * hello_ccs.cmd - CCS linker configuration file for hello.
+ *
+ * Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+ * Software License Agreement
+ *
+ * Texas Instruments (TI) is supplying this software for use solely and
+ * exclusively on TI's microcontroller products. The software is owned by
+ * TI and/or its suppliers, and is protected under applicable copyright
+ * laws. You may not combine this software with "viral" open-source
+ * software in order to form a larger program.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+ * NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+ * NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+ * CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+ * DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ * This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+ *
+ *****************************************************************************/
+
+--retain=g_pfnVectors
+
+/* The following command line options are set as part of the CCS project. */
+/* If you are building using the command line, or for some reason want to */
+/* define them here, you can uncomment and modify these lines as needed. */
+/* If you are using CCS for building, it is probably better to make any such */
+/* modifications in your CCS project and leave this file alone. */
+/* */
+/* --heap_size=0 */
+/* --stack_size=256 */
+/* --library=rtsv7M3_T_le_eabi.lib */
+
+/* The starting address of the application. Normally the interrupt vectors */
+/* must be located at the beginning of the application. */
+#define APP_BASE 0x00000000
+#define RAM_BASE 0x20000000
+
+/* System memory map */
+
+MEMORY
+{
+ /* Application stored in and executes from internal flash */
+ FLASH (RX) : origin = APP_BASE, length = 0x00040000
+ /* Application uses internal RAM for data */
+ SRAM (RWX) : origin = 0x20000000, length = 0x00008000
+}
+
+/* Section allocation in memory */
+
+SECTIONS
+{
+ .intvecs: > APP_BASE
+ .text : > FLASH
+ .const : > FLASH
+ .cinit : > FLASH
+ .pinit : > FLASH
+ .init_array : > FLASH
+
+ .vtable : > RAM_BASE
+ .data : > SRAM
+ .bss : > SRAM
+ .sysmem : > SRAM
+ .stack : > SRAM
+}
+
+__STACK_TOP = __stack + 512;
diff --git a/boards/ek-tm4c123gxl/hello/readme.txt b/boards/ek-tm4c123gxl/hello/readme.txt new file mode 100644 index 0000000..043789d --- /dev/null +++ b/boards/ek-tm4c123gxl/hello/readme.txt @@ -0,0 +1,27 @@ +Hello World
+
+A very simple ``hello world'' example. It simply displays ``Hello World!''
+on the UART and is a starting point for more complicated applications.
+
+UART0, connected to the Virtual Serial Port and running at
+115,200, 8-N-1, is used to display messages from this application.
+
+-------------------------------------------------------------------------------
+
+Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+Software License Agreement
+
+Texas Instruments (TI) is supplying this software for use solely and
+exclusively on TI's microcontroller products. The software is owned by
+TI and/or its suppliers, and is protected under applicable copyright
+laws. You may not combine this software with "viral" open-source
+software in order to form a larger program.
+
+THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+DAMAGES, FOR ANY REASON WHATSOEVER.
+
+This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
diff --git a/boards/ek-tm4c123gxl/hello/rvmdk/hello.axf b/boards/ek-tm4c123gxl/hello/rvmdk/hello.axf Binary files differnew file mode 100644 index 0000000..e27a601 --- /dev/null +++ b/boards/ek-tm4c123gxl/hello/rvmdk/hello.axf diff --git a/boards/ek-tm4c123gxl/hello/rvmdk/hello.bin b/boards/ek-tm4c123gxl/hello/rvmdk/hello.bin Binary files differnew file mode 100644 index 0000000..e689012 --- /dev/null +++ b/boards/ek-tm4c123gxl/hello/rvmdk/hello.bin diff --git a/boards/ek-tm4c123gxl/hello/startup_ccs.c b/boards/ek-tm4c123gxl/hello/startup_ccs.c new file mode 100644 index 0000000..ca18035 --- /dev/null +++ b/boards/ek-tm4c123gxl/hello/startup_ccs.c @@ -0,0 +1,295 @@ +//*****************************************************************************
+//
+// startup_ccs.c - Startup code for use with TI's Code Composer Studio.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// External declaration for the reset handler that is to be called when the
+// processor is started
+//
+//*****************************************************************************
+extern void _c_int00(void);
+
+//*****************************************************************************
+//
+// Linker variable that marks the top of the stack.
+//
+//*****************************************************************************
+extern uint32_t __STACK_TOP;
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000 or at the start of
+// the program if located at a start address other than 0.
+//
+//*****************************************************************************
+#pragma DATA_SECTION(g_pfnVectors, ".intvecs")
+void (* const g_pfnVectors[])(void) =
+{
+ (void (*)(void))((uint32_t)&__STACK_TOP),
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ IntDefaultHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ IntDefaultHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ IntDefaultHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ //
+ // Jump to the CCS C initialization routine. This will enable the
+ // floating-point unit as well, so that does not need to be done here.
+ //
+ __asm(" .global _c_int00\n"
+ " b.w _c_int00");
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/hello/startup_ewarm.c b/boards/ek-tm4c123gxl/hello/startup_ewarm.c new file mode 100644 index 0000000..8d8e1a9 --- /dev/null +++ b/boards/ek-tm4c123gxl/hello/startup_ewarm.c @@ -0,0 +1,326 @@ +//*****************************************************************************
+//
+// startup_ewarm.c - Startup code for use with IAR's Embedded Workbench,
+// version 5.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Enable the IAR extensions for this source file.
+//
+//*****************************************************************************
+#pragma language=extended
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// The entry point for the application startup code.
+//
+//*****************************************************************************
+extern void __iar_program_start(void);
+
+//*****************************************************************************
+//
+// Reserve space for the system stack.
+//
+//*****************************************************************************
+static uint32_t pui32Stack[128] @ ".noinit";
+
+//*****************************************************************************
+//
+// A union that describes the entries of the vector table. The union is needed
+// since the first entry is the stack pointer and the remainder are function
+// pointers.
+//
+//*****************************************************************************
+typedef union
+{
+ void (*pfnHandler)(void);
+ uint32_t ui32Ptr;
+}
+uVectorEntry;
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000.
+//
+//*****************************************************************************
+__root const uVectorEntry __vector_table[] @ ".intvec" =
+{
+ { .ui32Ptr = (uint32_t)pui32Stack + sizeof(pui32Stack) },
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ IntDefaultHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ IntDefaultHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ IntDefaultHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ //
+ // Enable the floating-point unit. This must be done here to handle the
+ // case where main() uses floating-point and the function prologue saves
+ // floating-point registers (which will fault if floating-point is not
+ // enabled). Any configuration of the floating-point unit using DriverLib
+ // APIs must be done here prior to the floating-point unit being enabled.
+ //
+ // Note that this does not use DriverLib since it might not be included in
+ // this project.
+ //
+ HWREG(NVIC_CPAC) = ((HWREG(NVIC_CPAC) &
+ ~(NVIC_CPAC_CP10_M | NVIC_CPAC_CP11_M)) |
+ NVIC_CPAC_CP10_FULL | NVIC_CPAC_CP11_FULL);
+
+ //
+ // Call the application's entry point.
+ //
+ __iar_program_start();
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/hello/startup_gcc.c b/boards/ek-tm4c123gxl/hello/startup_gcc.c new file mode 100644 index 0000000..d164864 --- /dev/null +++ b/boards/ek-tm4c123gxl/hello/startup_gcc.c @@ -0,0 +1,342 @@ +//*****************************************************************************
+//
+// startup_gcc.c - Startup code for use with GNU tools.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// The entry point for the application.
+//
+//*****************************************************************************
+extern int main(void);
+
+//*****************************************************************************
+//
+// Reserve space for the system stack.
+//
+//*****************************************************************************
+static uint32_t pui32Stack[128];
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000.
+//
+//*****************************************************************************
+__attribute__ ((section(".isr_vector")))
+void (* const g_pfnVectors[])(void) =
+{
+ (void (*)(void))((uint32_t)pui32Stack + sizeof(pui32Stack)),
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ IntDefaultHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ IntDefaultHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ IntDefaultHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// The following are constructs created by the linker, indicating where the
+// the "data" and "bss" segments reside in memory. The initializers for the
+// for the "data" segment resides immediately following the "text" segment.
+//
+//*****************************************************************************
+extern uint32_t _etext;
+extern uint32_t _data;
+extern uint32_t _edata;
+extern uint32_t _bss;
+extern uint32_t _ebss;
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ uint32_t *pui32Src, *pui32Dest;
+
+ //
+ // Copy the data segment initializers from flash to SRAM.
+ //
+ pui32Src = &_etext;
+ for(pui32Dest = &_data; pui32Dest < &_edata; )
+ {
+ *pui32Dest++ = *pui32Src++;
+ }
+
+ //
+ // Zero fill the bss segment.
+ //
+ __asm(" ldr r0, =_bss\n"
+ " ldr r1, =_ebss\n"
+ " mov r2, #0\n"
+ " .thumb_func\n"
+ "zero_loop:\n"
+ " cmp r0, r1\n"
+ " it lt\n"
+ " strlt r2, [r0], #4\n"
+ " blt zero_loop");
+
+ //
+ // Enable the floating-point unit. This must be done here to handle the
+ // case where main() uses floating-point and the function prologue saves
+ // floating-point registers (which will fault if floating-point is not
+ // enabled). Any configuration of the floating-point unit using DriverLib
+ // APIs must be done here prior to the floating-point unit being enabled.
+ //
+ // Note that this does not use DriverLib since it might not be included in
+ // this project.
+ //
+ HWREG(NVIC_CPAC) = ((HWREG(NVIC_CPAC) &
+ ~(NVIC_CPAC_CP10_M | NVIC_CPAC_CP11_M)) |
+ NVIC_CPAC_CP10_FULL | NVIC_CPAC_CP11_FULL);
+
+ //
+ // Call the application's entry point.
+ //
+ main();
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/hello/startup_rvmdk.S b/boards/ek-tm4c123gxl/hello/startup_rvmdk.S new file mode 100644 index 0000000..37cd427 --- /dev/null +++ b/boards/ek-tm4c123gxl/hello/startup_rvmdk.S @@ -0,0 +1,351 @@ +; <<< Use Configuration Wizard in Context Menu >>>
+;******************************************************************************
+;
+; startup_rvmdk.S - Startup code for use with Keil's uVision.
+;
+; Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+; Software License Agreement
+;
+; Texas Instruments (TI) is supplying this software for use solely and
+; exclusively on TI's microcontroller products. The software is owned by
+; TI and/or its suppliers, and is protected under applicable copyright
+; laws. You may not combine this software with "viral" open-source
+; software in order to form a larger program.
+;
+; THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+; NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+; NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+; A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+; CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+; DAMAGES, FOR ANY REASON WHATSOEVER.
+;
+; This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+;
+;******************************************************************************
+
+;******************************************************************************
+;
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+;******************************************************************************
+Stack EQU 0x00000200
+
+;******************************************************************************
+;
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+;******************************************************************************
+Heap EQU 0x00000000
+
+;******************************************************************************
+;
+; Allocate space for the stack.
+;
+;******************************************************************************
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+StackMem
+ SPACE Stack
+__initial_sp
+
+;******************************************************************************
+;
+; Allocate space for the heap.
+;
+;******************************************************************************
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+HeapMem
+ SPACE Heap
+__heap_limit
+
+;******************************************************************************
+;
+; Indicate that the code in this file preserves 8-byte alignment of the stack.
+;
+;******************************************************************************
+ PRESERVE8
+
+;******************************************************************************
+;
+; Place code into the reset code section.
+;
+;******************************************************************************
+ AREA RESET, CODE, READONLY
+ THUMB
+
+;******************************************************************************
+;
+; The vector table.
+;
+;******************************************************************************
+ EXPORT __Vectors
+__Vectors
+ DCD StackMem + Stack ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NmiSR ; NMI Handler
+ DCD FaultISR ; Hard Fault Handler
+ DCD IntDefaultHandler ; The MPU fault handler
+ DCD IntDefaultHandler ; The bus fault handler
+ DCD IntDefaultHandler ; The usage fault handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; SVCall handler
+ DCD IntDefaultHandler ; Debug monitor handler
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; The PendSV handler
+ DCD IntDefaultHandler ; The SysTick handler
+ DCD IntDefaultHandler ; GPIO Port A
+ DCD IntDefaultHandler ; GPIO Port B
+ DCD IntDefaultHandler ; GPIO Port C
+ DCD IntDefaultHandler ; GPIO Port D
+ DCD IntDefaultHandler ; GPIO Port E
+ DCD IntDefaultHandler ; UART0 Rx and Tx
+ DCD IntDefaultHandler ; UART1 Rx and Tx
+ DCD IntDefaultHandler ; SSI0 Rx and Tx
+ DCD IntDefaultHandler ; I2C0 Master and Slave
+ DCD IntDefaultHandler ; PWM Fault
+ DCD IntDefaultHandler ; PWM Generator 0
+ DCD IntDefaultHandler ; PWM Generator 1
+ DCD IntDefaultHandler ; PWM Generator 2
+ DCD IntDefaultHandler ; Quadrature Encoder 0
+ DCD IntDefaultHandler ; ADC Sequence 0
+ DCD IntDefaultHandler ; ADC Sequence 1
+ DCD IntDefaultHandler ; ADC Sequence 2
+ DCD IntDefaultHandler ; ADC Sequence 3
+ DCD IntDefaultHandler ; Watchdog timer
+ DCD IntDefaultHandler ; Timer 0 subtimer A
+ DCD IntDefaultHandler ; Timer 0 subtimer B
+ DCD IntDefaultHandler ; Timer 1 subtimer A
+ DCD IntDefaultHandler ; Timer 1 subtimer B
+ DCD IntDefaultHandler ; Timer 2 subtimer A
+ DCD IntDefaultHandler ; Timer 2 subtimer B
+ DCD IntDefaultHandler ; Analog Comparator 0
+ DCD IntDefaultHandler ; Analog Comparator 1
+ DCD IntDefaultHandler ; Analog Comparator 2
+ DCD IntDefaultHandler ; System Control (PLL, OSC, BO)
+ DCD IntDefaultHandler ; FLASH Control
+ DCD IntDefaultHandler ; GPIO Port F
+ DCD IntDefaultHandler ; GPIO Port G
+ DCD IntDefaultHandler ; GPIO Port H
+ DCD IntDefaultHandler ; UART2 Rx and Tx
+ DCD IntDefaultHandler ; SSI1 Rx and Tx
+ DCD IntDefaultHandler ; Timer 3 subtimer A
+ DCD IntDefaultHandler ; Timer 3 subtimer B
+ DCD IntDefaultHandler ; I2C1 Master and Slave
+ DCD IntDefaultHandler ; Quadrature Encoder 1
+ DCD IntDefaultHandler ; CAN0
+ DCD IntDefaultHandler ; CAN1
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; Hibernate
+ DCD IntDefaultHandler ; USB0
+ DCD IntDefaultHandler ; PWM Generator 3
+ DCD IntDefaultHandler ; uDMA Software Transfer
+ DCD IntDefaultHandler ; uDMA Error
+ DCD IntDefaultHandler ; ADC1 Sequence 0
+ DCD IntDefaultHandler ; ADC1 Sequence 1
+ DCD IntDefaultHandler ; ADC1 Sequence 2
+ DCD IntDefaultHandler ; ADC1 Sequence 3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; GPIO Port J
+ DCD IntDefaultHandler ; GPIO Port K
+ DCD IntDefaultHandler ; GPIO Port L
+ DCD IntDefaultHandler ; SSI2 Rx and Tx
+ DCD IntDefaultHandler ; SSI3 Rx and Tx
+ DCD IntDefaultHandler ; UART3 Rx and Tx
+ DCD IntDefaultHandler ; UART4 Rx and Tx
+ DCD IntDefaultHandler ; UART5 Rx and Tx
+ DCD IntDefaultHandler ; UART6 Rx and Tx
+ DCD IntDefaultHandler ; UART7 Rx and Tx
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; I2C2 Master and Slave
+ DCD IntDefaultHandler ; I2C3 Master and Slave
+ DCD IntDefaultHandler ; Timer 4 subtimer A
+ DCD IntDefaultHandler ; Timer 4 subtimer B
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; Timer 5 subtimer A
+ DCD IntDefaultHandler ; Timer 5 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 0 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 0 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 1 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 1 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 2 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 2 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 3 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 3 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 4 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 4 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 5 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 5 subtimer B
+ DCD IntDefaultHandler ; FPU
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; I2C4 Master and Slave
+ DCD IntDefaultHandler ; I2C5 Master and Slave
+ DCD IntDefaultHandler ; GPIO Port M
+ DCD IntDefaultHandler ; GPIO Port N
+ DCD IntDefaultHandler ; Quadrature Encoder 2
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; GPIO Port P (Summary or P0)
+ DCD IntDefaultHandler ; GPIO Port P1
+ DCD IntDefaultHandler ; GPIO Port P2
+ DCD IntDefaultHandler ; GPIO Port P3
+ DCD IntDefaultHandler ; GPIO Port P4
+ DCD IntDefaultHandler ; GPIO Port P5
+ DCD IntDefaultHandler ; GPIO Port P6
+ DCD IntDefaultHandler ; GPIO Port P7
+ DCD IntDefaultHandler ; GPIO Port Q (Summary or Q0)
+ DCD IntDefaultHandler ; GPIO Port Q1
+ DCD IntDefaultHandler ; GPIO Port Q2
+ DCD IntDefaultHandler ; GPIO Port Q3
+ DCD IntDefaultHandler ; GPIO Port Q4
+ DCD IntDefaultHandler ; GPIO Port Q5
+ DCD IntDefaultHandler ; GPIO Port Q6
+ DCD IntDefaultHandler ; GPIO Port Q7
+ DCD IntDefaultHandler ; GPIO Port R
+ DCD IntDefaultHandler ; GPIO Port S
+ DCD IntDefaultHandler ; PWM 1 Generator 0
+ DCD IntDefaultHandler ; PWM 1 Generator 1
+ DCD IntDefaultHandler ; PWM 1 Generator 2
+ DCD IntDefaultHandler ; PWM 1 Generator 3
+ DCD IntDefaultHandler ; PWM 1 Fault
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor first starts execution
+; following a reset event.
+;
+;******************************************************************************
+ EXPORT Reset_Handler
+Reset_Handler
+ ;
+ ; Enable the floating-point unit. This must be done here to handle the
+ ; case where main() uses floating-point and the function prologue saves
+ ; floating-point registers (which will fault if floating-point is not
+ ; enabled). Any configuration of the floating-point unit using
+ ; DriverLib APIs must be done here prior to the floating-point unit
+ ; being enabled.
+ ;
+ ; Note that this does not use DriverLib since it might not be included
+ ; in this project.
+ ;
+ MOVW R0, #0xED88
+ MOVT R0, #0xE000
+ LDR R1, [R0]
+ ORR R1, #0x00F00000
+ STR R1, [R0]
+
+ ;
+ ; Call the C library enty point that handles startup. This will copy
+ ; the .data section initializers from flash to SRAM and zero fill the
+ ; .bss section.
+ ;
+ IMPORT __main
+ B __main
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives a NMI. This
+; simply enters an infinite loop, preserving the system state for examination
+; by a debugger.
+;
+;******************************************************************************
+NmiSR
+ B NmiSR
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives a fault
+; interrupt. This simply enters an infinite loop, preserving the system state
+; for examination by a debugger.
+;
+;******************************************************************************
+FaultISR
+ B FaultISR
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives an unexpected
+; interrupt. This simply enters an infinite loop, preserving the system state
+; for examination by a debugger.
+;
+;******************************************************************************
+IntDefaultHandler
+ B IntDefaultHandler
+
+;******************************************************************************
+;
+; Make sure the end of this section is aligned.
+;
+;******************************************************************************
+ ALIGN
+
+;******************************************************************************
+;
+; Some code in the normal code section for initializing the heap and stack.
+;
+;******************************************************************************
+ AREA |.text|, CODE, READONLY
+
+;******************************************************************************
+;
+; The function expected of the C library startup code for defining the stack
+; and heap memory locations. For the C library version of the startup code,
+; provide this function so that the C library initialization code can find out
+; the location of the stack and heap.
+;
+;******************************************************************************
+ IF :DEF: __MICROLIB
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+ ELSE
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+__user_initial_stackheap
+ LDR R0, =HeapMem
+ LDR R1, =(StackMem + Stack)
+ LDR R2, =(HeapMem + Heap)
+ LDR R3, =StackMem
+ BX LR
+ ENDIF
+
+;******************************************************************************
+;
+; Make sure the end of this section is aligned.
+;
+;******************************************************************************
+ ALIGN
+
+;******************************************************************************
+;
+; Tell the assembler that we're done.
+;
+;******************************************************************************
+ END
diff --git a/boards/ek-tm4c123gxl/interrupts/Makefile b/boards/ek-tm4c123gxl/interrupts/Makefile new file mode 100644 index 0000000..23f5ef6 --- /dev/null +++ b/boards/ek-tm4c123gxl/interrupts/Makefile @@ -0,0 +1,85 @@ +#******************************************************************************
+#
+# Makefile - Rules for building the interrupts example.
+#
+# Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+# Software License Agreement
+#
+# Texas Instruments (TI) is supplying this software for use solely and
+# exclusively on TI's microcontroller products. The software is owned by
+# TI and/or its suppliers, and is protected under applicable copyright
+# laws. You may not combine this software with "viral" open-source
+# software in order to form a larger program.
+#
+# THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+# NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+# NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+# CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+# DAMAGES, FOR ANY REASON WHATSOEVER.
+#
+# This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+#
+#******************************************************************************
+
+#
+# Defines the part type that this project uses.
+#
+PART=TM4C123GH6PM
+
+#
+# The base directory for TivaWare.
+#
+ROOT=../../../..
+
+#
+# Include the common make definitions.
+#
+include ${ROOT}/makedefs
+
+#
+# Where to find source files that do not live in this directory.
+#
+VPATH=../../../../utils
+
+#
+# Where to find header files that do not live in the source directory.
+#
+IPATH=../../../..
+
+#
+# The default rule, which causes the interrupts example to be built.
+#
+all: ${COMPILER}
+all: ${COMPILER}/interrupts.axf
+
+#
+# The rule to clean out all the build products.
+#
+clean:
+ @rm -rf ${COMPILER} ${wildcard *~}
+
+#
+# The rule to create the target directory.
+#
+${COMPILER}:
+ @mkdir -p ${COMPILER}
+
+#
+# Rules for building the interrupts example.
+#
+${COMPILER}/interrupts.axf: ${COMPILER}/interrupts.o
+${COMPILER}/interrupts.axf: ${COMPILER}/startup_${COMPILER}.o
+${COMPILER}/interrupts.axf: ${COMPILER}/uartstdio.o
+${COMPILER}/interrupts.axf: ${ROOT}/driverlib/${COMPILER}/libdriver.a
+${COMPILER}/interrupts.axf: interrupts.ld
+SCATTERgcc_interrupts=interrupts.ld
+ENTRY_interrupts=ResetISR
+CFLAGSgcc=-DTARGET_IS_TM4C123_RB1
+
+#
+# Include the automatically generated dependency files.
+#
+ifneq (${MAKECMDGOALS},clean)
+-include ${wildcard ${COMPILER}/*.d} __dummy__
+endif
diff --git a/boards/ek-tm4c123gxl/interrupts/ccs/.ccsimportspec b/boards/ek-tm4c123gxl/interrupts/ccs/.ccsimportspec new file mode 100644 index 0000000..9033256 --- /dev/null +++ b/boards/ek-tm4c123gxl/interrupts/ccs/.ccsimportspec @@ -0,0 +1,8 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<importSpec>
+ <source root="..">
+ <file name="interrupts.c"/>
+ <file regex=".*_ccs\.cmd"/>
+ <file name="startup_ccs.c"/>
+ </source>
+</importSpec>
diff --git a/boards/ek-tm4c123gxl/interrupts/ccs/.ccsproject b/boards/ek-tm4c123gxl/interrupts/ccs/.ccsproject new file mode 100644 index 0000000..75fb50e --- /dev/null +++ b/boards/ek-tm4c123gxl/interrupts/ccs/.ccsproject @@ -0,0 +1,10 @@ +<?xml version="1.0" encoding="UTF-8" ?>
+<?ccsproject version="1.0"?>
+<projectOptions>
+ <deviceVariant value="Cortex M.TM4C123GH6PM"/>
+ <deviceFamily value="TMS470"/>
+ <deviceEndianness value="little"/>
+ <codegenToolVersion value="5.0.4"/>
+ <isElfFormat value="true"/>
+ <rts value="libc.a"/>
+</projectOptions>
diff --git a/boards/ek-tm4c123gxl/interrupts/ccs/.cproject b/boards/ek-tm4c123gxl/interrupts/ccs/.cproject new file mode 100644 index 0000000..9c75177 --- /dev/null +++ b/boards/ek-tm4c123gxl/interrupts/ccs/.cproject @@ -0,0 +1,187 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+ <storageModule configRelations="2" moduleId="org.eclipse.cdt.core.settings">
+ <cconfiguration id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1588768273">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1588768273" moduleId="org.eclipse.cdt.core.settings" name="Debug">
+ <macros>
+ <stringMacro name="SW_ROOT" type="VALUE_PATH_DIR" value="${PROJECT_ROOT}/../../../../.."/>
+ </macros>
+ <externalSettings/>
+ <extensions>
+ <extension id="com.ti.ccstudio.binaryparser.CoffParser" point="org.eclipse.cdt.core.BinaryParser"/>
+ <extension id="com.ti.ccstudio.errorparser.CoffErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.LinkErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.AsmErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactExtension="out" artifactName="${ProjName}" buildProperties="" cleanCommand="${CG_CLEAN_CMD}" description="" id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1588768273" name="Debug" parent="com.ti.ccstudio.buildDefinitions.TMS470.Debug" postbuildStep=""${CCE_INSTALL_ROOT}/utils/tiobj2bin/tiobj2bin" "${BuildArtifactFileName}" "${BuildArtifactFileBaseName}.bin" "${CG_TOOL_ROOT}/bin/armofd" "${CG_TOOL_ROOT}/bin/armhex" "${CCE_INSTALL_ROOT}/utils/tiobj2bin/mkhex4bin"">
+ <folderInfo id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1588768273." name="/" resourcePath="">
+ <toolChain id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.DebugToolchain.1008256954" name="TI Build Tools" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.DebugToolchain" targetTool="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug.741448966">
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS.985805127" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS" valueType="stringList">
+ <listOptionValue builtIn="false" value="DEVICE_CONFIGURATION_ID=Cortex M.TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="DEVICE_ENDIANNESS=little"/>
+ <listOptionValue builtIn="false" value="OUTPUT_FORMAT=ELF"/>
+ <listOptionValue builtIn="false" value="CCS_MBS_VERSION=5.1.0.01"/>
+ <listOptionValue builtIn="false" value="RUNTIME_SUPPORT_LIBRARY=libc.a"/>
+ <listOptionValue builtIn="false" value="OUTPUT_TYPE=executable"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION.1501388594" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION" value="5.0.4" valueType="string"/>
+ <targetPlatform id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformDebug.1764956513" name="Platform" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformDebug"/>
+ <builder buildPath="${BuildDirectory}" id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderDebug.670312045" name="GNU Make.Debug" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderDebug"/>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerDebug.1365676207" name="ARM Compiler" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerDebug">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.1420571659" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.7M4" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.737266328" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.487558254" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.eabi" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.2075815408" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.FPv4SPD16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL.1358209711" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL.SYMDEBUG__DWARF" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING.1445741118" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING" valueType="stringList">
+ <listOptionValue builtIn="false" value="225"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER.1023540245" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.616658260" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH.1303313465" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH" valueType="includePath">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN.1910573783" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.1572047998" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.on" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL.1927367789" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL.2" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC.870394526" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL.1269976629" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE.1985336257" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE" valueType="definedSymbols">
+ <listOptionValue builtIn="false" value="ccs="ccs""/>
+ <listOptionValue builtIn="false" value="PART_TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="TARGET_IS_TM4C123_RB1"/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS.669820467" name="C Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS.595093515" name="C++ Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS.1164241534" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS.532361318" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS"/>
+ </tool>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug.741448966" name="ARM Linker" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE.876465021" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE" value=""interrupts_ccs.map"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE.175877505" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE" value="512" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE.392351576" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE" value="0" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE.65444298" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE" value=""${ProjName}.out"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO.1802888393" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO" value=""${ProjName}_linkInfo.xml"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER.159299668" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.398241076" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH.1991088687" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH" valueType="libPaths">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/lib""/>
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY.575714079" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY" valueType="libs">
+ <listOptionValue builtIn="false" value=""libc.a""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/driverlib/ccs/Debug/driverlib.lib""/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS.1869101997" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS.886056505" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS.1269820043" name="Generated Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS"/>
+ </tool>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ <cconfiguration id="com.ti.ccstudio.buildDefinitions.TMS470.Release.1678600599">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.ti.ccstudio.buildDefinitions.TMS470.Release.1678600599" moduleId="org.eclipse.cdt.core.settings" name="Release">
+ <macros>
+ <stringMacro name="SW_ROOT" type="VALUE_PATH_DIR" value="${PROJECT_ROOT}/../../../../.."/>
+ </macros>
+ <externalSettings/>
+ <extensions>
+ <extension id="com.ti.ccstudio.binaryparser.CoffParser" point="org.eclipse.cdt.core.BinaryParser"/>
+ <extension id="com.ti.ccstudio.errorparser.CoffErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.LinkErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.AsmErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactExtension="out" artifactName="${ProjName}" buildProperties="" cleanCommand="${CG_CLEAN_CMD}" description="" id="com.ti.ccstudio.buildDefinitions.TMS470.Release.1678600599" name="Release" parent="com.ti.ccstudio.buildDefinitions.TMS470.Release" postbuildStep=""${CCE_INSTALL_ROOT}/utils/tiobj2bin/tiobj2bin" "${BuildArtifactFileName}" "${BuildArtifactFileBaseName}.bin" "${CG_TOOL_ROOT}/bin/armofd" "${CG_TOOL_ROOT}/bin/armhex" "${CCE_INSTALL_ROOT}/utils/tiobj2bin/mkhex4bin"">
+ <folderInfo id="com.ti.ccstudio.buildDefinitions.TMS470.Release.1678600599." name="/" resourcePath="">
+ <toolChain id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.ReleaseToolchain.169191549" name="TI Build Tools" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.ReleaseToolchain" targetTool="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease.1308358371">
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS.29505221" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS" valueType="stringList">
+ <listOptionValue builtIn="false" value="DEVICE_CONFIGURATION_ID=Cortex M.TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="DEVICE_ENDIANNESS=little"/>
+ <listOptionValue builtIn="false" value="OUTPUT_FORMAT=ELF"/>
+ <listOptionValue builtIn="false" value="CCS_MBS_VERSION=5.1.0.01"/>
+ <listOptionValue builtIn="false" value="RUNTIME_SUPPORT_LIBRARY=libc.a"/>
+ <listOptionValue builtIn="false" value="OUTPUT_TYPE=executable"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION.1663851931" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION" value="5.0.4" valueType="string"/>
+ <targetPlatform id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformRelease.265303649" name="Platform" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformRelease"/>
+ <builder buildPath="${BuildDirectory}" id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderRelease.409184459" name="GNU Make.Release" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderRelease"/>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerRelease.2101745052" name="ARM Compiler" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerRelease">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.1425509660" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.7M4" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.594530075" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.1950599916" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.eabi" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.2062708830" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.FPv4SPD16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING.1144567997" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING" valueType="stringList">
+ <listOptionValue builtIn="false" value="225"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER.2029740184" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.136319304" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH.2017650678" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH" valueType="includePath">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN.483966416" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.852279101" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.on" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC.1928145213" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL.1718889154" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE.1655508787" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE" valueType="definedSymbols">
+ <listOptionValue builtIn="false" value="ccs="ccs""/>
+ <listOptionValue builtIn="false" value="PART_TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="TARGET_IS_TM4C123_RB1"/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS.1500415652" name="C Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS.1931003464" name="C++ Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS.1216307882" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS.117895984" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS"/>
+ </tool>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease.1308358371" name="ARM Linker" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE.120101704" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE" value=""interrupts_ccs.map"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE.2029073534" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE" value="512" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE.1471623548" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE" value="0" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE.1929096822" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE" value=""${ProjName}.out"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO.1364213263" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO" value=""${ProjName}_linkInfo.xml"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER.1530064015" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.224043125" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH.1325806379" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH" valueType="libPaths">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/lib""/>
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY.1647012245" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY" valueType="libs">
+ <listOptionValue builtIn="false" value=""libc.a""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/driverlib/ccs/Debug/driverlib.lib""/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS.2109247176" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS.845757835" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS.219940990" name="Generated Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS"/>
+ </tool>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <project id="interrupts.com.ti.ccstudio.buildDefinitions.TMS470.ProjectType.1823376050" name="ARM" projectType="com.ti.ccstudio.buildDefinitions.TMS470.ProjectType"/>
+ </storageModule>
+ <storageModule moduleId="scannerConfiguration"/>
+ <storageModule moduleId="org.eclipse.cdt.core.language.mapping">
+ <project-mappings>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.asmSource" language="com.ti.ccstudio.core.TIASMLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cHeader" language="com.ti.ccstudio.core.TIGCCLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cSource" language="com.ti.ccstudio.core.TIGCCLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cxxHeader" language="com.ti.ccstudio.core.TIGPPLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cxxSource" language="com.ti.ccstudio.core.TIGPPLanguage"/>
+ </project-mappings>
+ </storageModule>
+</cproject>
diff --git a/boards/ek-tm4c123gxl/interrupts/ccs/.project b/boards/ek-tm4c123gxl/interrupts/ccs/.project new file mode 100644 index 0000000..918ff96 --- /dev/null +++ b/boards/ek-tm4c123gxl/interrupts/ccs/.project @@ -0,0 +1,55 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+ <name>interrupts</name>
+ <comment></comment>
+ <projects>
+ </projects>
+ <buildSpec>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+ <triggers>full,incremental,</triggers>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ </buildSpec>
+ <natures>
+ <nature>com.ti.ccstudio.core.ccsNature</nature>
+ <nature>org.eclipse.cdt.core.cnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+ <nature>org.eclipse.cdt.core.ccnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+ </natures>
+ <linkedResources>
+ <link>
+ <name>interrupts.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/interrupts/interrupts.c</locationURI>
+ </link>
+ <link>
+ <name>interrupts_ccs.cmd</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/interrupts/interrupts_ccs.cmd</locationURI>
+ </link>
+ <link>
+ <name>startup_ccs.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/interrupts/startup_ccs.c</locationURI>
+ </link>
+ <link>
+ <name>utils/uartstdio.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/utils/uartstdio.c</locationURI>
+ </link>
+ </linkedResources>
+ <variableList>
+ <variable>
+ <name>SW_ROOT</name>
+ <value>$%7BPARENT-5-PROJECT_LOC%7D</value>
+ </variable>
+ </variableList>
+</projectDescription>
diff --git a/boards/ek-tm4c123gxl/interrupts/ccs/.settings/org.eclipse.cdt.codan.core.prefs b/boards/ek-tm4c123gxl/interrupts/ccs/.settings/org.eclipse.cdt.codan.core.prefs new file mode 100644 index 0000000..98b6350 --- /dev/null +++ b/boards/ek-tm4c123gxl/interrupts/ccs/.settings/org.eclipse.cdt.codan.core.prefs @@ -0,0 +1,3 @@ +eclipse.preferences.version=1
+inEditor=false
+onBuild=false
diff --git a/boards/ek-tm4c123gxl/interrupts/ccs/Debug/interrupts.bin b/boards/ek-tm4c123gxl/interrupts/ccs/Debug/interrupts.bin Binary files differnew file mode 100644 index 0000000..17a5db5 --- /dev/null +++ b/boards/ek-tm4c123gxl/interrupts/ccs/Debug/interrupts.bin diff --git a/boards/ek-tm4c123gxl/interrupts/ccs/Debug/interrupts.out b/boards/ek-tm4c123gxl/interrupts/ccs/Debug/interrupts.out Binary files differnew file mode 100644 index 0000000..77cc4c1 --- /dev/null +++ b/boards/ek-tm4c123gxl/interrupts/ccs/Debug/interrupts.out diff --git a/boards/ek-tm4c123gxl/interrupts/ccs/macros.ini_initial b/boards/ek-tm4c123gxl/interrupts/ccs/macros.ini_initial new file mode 100644 index 0000000..31214b5 --- /dev/null +++ b/boards/ek-tm4c123gxl/interrupts/ccs/macros.ini_initial @@ -0,0 +1 @@ +SW_ROOT = ../../../../..
diff --git a/boards/ek-tm4c123gxl/interrupts/ccs/target_config.ccxml b/boards/ek-tm4c123gxl/interrupts/ccs/target_config.ccxml new file mode 100644 index 0000000..be4342a --- /dev/null +++ b/boards/ek-tm4c123gxl/interrupts/ccs/target_config.ccxml @@ -0,0 +1,13 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<configurations XML_version="1.2" id="configurations_0">
+ <configuration XML_version="1.2" id="Stellaris In-Circuit Debug Interface_0">
+ <instance XML_version="1.2" desc="Stellaris In-Circuit Debug Interface_0" href="connections/Stellaris_ICDI_Connection.xml" id="Stellaris In-Circuit Debug Interface_0" xml="Stellaris_ICDI_Connection.xml" xmlpath="connections"/>
+ <connection XML_version="1.2" id="Stellaris In-Circuit Debug Interface_0">
+ <instance XML_version="1.2" href="drivers/stellaris_cs_dap.xml" id="drivers" xml="stellaris_cs_dap.xml" xmlpath="drivers"/>
+ <instance XML_version="1.2" href="drivers/stellaris_cortex_m4.xml" id="drivers" xml="stellaris_cortex_m4.xml" xmlpath="drivers"/>
+ <platform XML_version="1.2" id="platform_0">
+ <instance XML_version="1.2" desc="Stellaris TM4C123GH6PM_0" href="devices/tm4c123gh6pm.xml" id="Stellaris TM4C123GH6PM_0" xml="tm4c123gh6pm.xml" xmlpath="devices"/>
+ </platform>
+ </connection>
+ </configuration>
+</configurations>
diff --git a/boards/ek-tm4c123gxl/interrupts/ewarm/Exe/interrupts.bin b/boards/ek-tm4c123gxl/interrupts/ewarm/Exe/interrupts.bin Binary files differnew file mode 100644 index 0000000..4d5ed08 --- /dev/null +++ b/boards/ek-tm4c123gxl/interrupts/ewarm/Exe/interrupts.bin diff --git a/boards/ek-tm4c123gxl/interrupts/ewarm/Exe/interrupts.out b/boards/ek-tm4c123gxl/interrupts/ewarm/Exe/interrupts.out Binary files differnew file mode 100644 index 0000000..577c878 --- /dev/null +++ b/boards/ek-tm4c123gxl/interrupts/ewarm/Exe/interrupts.out diff --git a/boards/ek-tm4c123gxl/interrupts/gcc/interrupts.axf b/boards/ek-tm4c123gxl/interrupts/gcc/interrupts.axf Binary files differnew file mode 100644 index 0000000..0401895 --- /dev/null +++ b/boards/ek-tm4c123gxl/interrupts/gcc/interrupts.axf diff --git a/boards/ek-tm4c123gxl/interrupts/gcc/interrupts.bin b/boards/ek-tm4c123gxl/interrupts/gcc/interrupts.bin Binary files differnew file mode 100644 index 0000000..a27d272 --- /dev/null +++ b/boards/ek-tm4c123gxl/interrupts/gcc/interrupts.bin diff --git a/boards/ek-tm4c123gxl/interrupts/interrupts.c b/boards/ek-tm4c123gxl/interrupts/interrupts.c new file mode 100644 index 0000000..6731232 --- /dev/null +++ b/boards/ek-tm4c123gxl/interrupts/interrupts.c @@ -0,0 +1,549 @@ +//*****************************************************************************
+//
+// interrupts.c - Interrupt preemption and tail-chaining example.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "inc/hw_ints.h"
+#include "inc/hw_memmap.h"
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+#include "driverlib/debug.h"
+#include "driverlib/fpu.h"
+#include "driverlib/gpio.h"
+#include "driverlib/interrupt.h"
+#include "driverlib/pin_map.h"
+#include "driverlib/rom.h"
+#include "driverlib/sysctl.h"
+#include "driverlib/systick.h"
+#include "driverlib/uart.h"
+#include "utils/uartstdio.h"
+
+//*****************************************************************************
+//
+//! \addtogroup example_list
+//! <h1>Interrupts (interrupts)</h1>
+//!
+//! This example application demonstrates the interrupt preemption and
+//! tail-chaining capabilities of Cortex-M4 microprocessor and NVIC. Nested
+//! interrupts are synthesized when the interrupts have the same priority,
+//! increasing priorities, and decreasing priorities. With increasing
+//! priorities, preemption will occur; in the other two cases tail-chaining
+//! will occur. The currently pending interrupts and the currently executing
+//! interrupt will be displayed on the display; GPIO pins E1, E2 and E3 will
+//! be asserted upon interrupt handler entry and de-asserted before interrupt
+//! handler exit so that the off-to-on time can be observed with a scope or
+//! logic analyzer to see the speed of tail-chaining (for the two cases where
+//! tail-chaining is occurring).
+//
+//*****************************************************************************
+
+//*****************************************************************************
+//
+// The count of interrupts received. This is incremented as each interrupt
+// handler runs, and its value saved into interrupt handler specific values to
+// determine the order in which the interrupt handlers were executed.
+//
+//*****************************************************************************
+volatile uint32_t g_ui32Index;
+
+//*****************************************************************************
+//
+// The value of g_ui32Index when the INT_GPIOA interrupt was processed.
+//
+//*****************************************************************************
+volatile uint32_t g_ui32GPIOa;
+
+//*****************************************************************************
+//
+// The value of g_ui32Index when the INT_GPIOB interrupt was processed.
+//
+//*****************************************************************************
+volatile uint32_t g_ui32GPIOb;
+
+//*****************************************************************************
+//
+// The value of g_ui32Index when the INT_GPIOC interrupt was processed.
+//
+//*****************************************************************************
+volatile uint32_t g_ui32GPIOc;
+
+//*****************************************************************************
+//
+// The error routine that is called if the driver library encounters an error.
+//
+//*****************************************************************************
+#ifdef DEBUG
+void
+__error__(char *pcFilename, uint32_t ui32Line)
+{
+}
+#endif
+
+//*****************************************************************************
+//
+// Delay for the specified number of seconds. Depending upon the current
+// SysTick value, the delay will be between N-1 and N seconds (i.e. N-1 full
+// seconds are guaranteed, aint32_t with the remainder of the current second).
+//
+//*****************************************************************************
+void
+Delay(uint32_t ui32Seconds)
+{
+ //
+ // Loop while there are more seconds to wait.
+ //
+ while(ui32Seconds--)
+ {
+ //
+ // Wait until the SysTick value is less than 1000.
+ //
+ while(ROM_SysTickValueGet() > 1000)
+ {
+ }
+
+ //
+ // Wait until the SysTick value is greater than 1000.
+ //
+ while(ROM_SysTickValueGet() < 1000)
+ {
+ }
+ }
+}
+
+//*****************************************************************************
+//
+// Display the interrupt state on the UART. The currently active and pending
+// interrupts are displayed.
+//
+//*****************************************************************************
+void
+DisplayIntStatus(void)
+{
+ uint32_t ui32Temp;
+
+ //
+ // Display the currently active interrupts.
+ //
+ ui32Temp = HWREG(NVIC_ACTIVE0);
+ UARTprintf("\rActive: %c%c%c ", (ui32Temp & 1) ? '1' : ' ',
+ (ui32Temp & 2) ? '2' : ' ', (ui32Temp & 4) ? '3' : ' ');
+
+ //
+ // Display the currently pending interrupts.
+ //
+ ui32Temp = HWREG(NVIC_PEND0);
+ UARTprintf("Pending: %c%c%c", (ui32Temp & 1) ? '1' : ' ',
+ (ui32Temp & 2) ? '2' : ' ', (ui32Temp & 4) ? '3' : ' ');
+}
+
+//*****************************************************************************
+//
+// This is the handler for INT_GPIOA. It simply saves the interrupt sequence
+// number.
+//
+//*****************************************************************************
+void
+IntGPIOa(void)
+{
+ //
+ // Set PE1 high to indicate entry to this interrupt handler.
+ //
+ ROM_GPIOPinWrite(GPIO_PORTE_BASE, GPIO_PIN_1, GPIO_PIN_1);
+
+ //
+ // Put the current interrupt state on the UART.
+ //
+ DisplayIntStatus();
+
+ //
+ // Wait two seconds.
+ //
+ Delay(2);
+
+ //
+ // Save and increment the interrupt sequence number.
+ //
+ g_ui32GPIOa = g_ui32Index++;
+
+ //
+ // Set PE1 low to indicate exit from this interrupt handler.
+ //
+ ROM_GPIOPinWrite(GPIO_PORTE_BASE, GPIO_PIN_1, 0);
+}
+
+//*****************************************************************************
+//
+// This is the handler for INT_GPIOB. It triggers INT_GPIOA and saves the
+// interrupt sequence number.
+//
+//*****************************************************************************
+void
+IntGPIOb(void)
+{
+ //
+ // Set PE2 high to indicate entry to this interrupt handler.
+ //
+ ROM_GPIOPinWrite(GPIO_PORTE_BASE, GPIO_PIN_2, GPIO_PIN_2);
+
+ //
+ // Put the current interrupt state on the UART.
+ //
+ DisplayIntStatus();
+
+ //
+ // Trigger the INT_GPIOA interrupt.
+ //
+ HWREG(NVIC_SW_TRIG) = INT_GPIOA - 16;
+
+ //
+ // Put the current interrupt state on the UART.
+ //
+ DisplayIntStatus();
+
+ //
+ // Wait two seconds.
+ //
+ Delay(2);
+
+ //
+ // Save and increment the interrupt sequence number.
+ //
+ g_ui32GPIOb = g_ui32Index++;
+
+ //
+ // Set PE2 low to indicate exit from this interrupt handler.
+ //
+ ROM_GPIOPinWrite(GPIO_PORTE_BASE, GPIO_PIN_2, 0);
+}
+
+//*****************************************************************************
+//
+// This is the handler for INT_GPIOC. It triggers INT_GPIOB and saves the
+// interrupt sequence number.
+//
+//*****************************************************************************
+void
+IntGPIOc(void)
+{
+ //
+ // Set PE3 high to indicate entry to this interrupt handler.
+ //
+ ROM_GPIOPinWrite(GPIO_PORTE_BASE, GPIO_PIN_3, GPIO_PIN_3);
+
+ //
+ // Put the current interrupt state on the UART.
+ //
+ DisplayIntStatus();
+
+ //
+ // Trigger the INT_GPIOB interrupt.
+ //
+ HWREG(NVIC_SW_TRIG) = INT_GPIOB - 16;
+
+ //
+ // Put the current interrupt state on the UART.
+ //
+ DisplayIntStatus();
+
+ //
+ // Wait two seconds.
+ //
+ Delay(2);
+
+ //
+ // Save and increment the interrupt sequence number.
+ //
+ g_ui32GPIOc = g_ui32Index++;
+
+ //
+ // Set PE3 low to indicate exit from this interrupt handler.
+ //
+ ROM_GPIOPinWrite(GPIO_PORTE_BASE, GPIO_PIN_3, 0);
+}
+
+//*****************************************************************************
+//
+// Configure the UART and its pins. This must be called before UARTprintf().
+//
+//*****************************************************************************
+void
+ConfigureUART(void)
+{
+ //
+ // Enable the GPIO Peripheral used by the UART.
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOA);
+
+ //
+ // Enable UART0
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_UART0);
+
+ //
+ // Configure GPIO Pins for UART mode.
+ //
+ ROM_GPIOPinConfigure(GPIO_PA0_U0RX);
+ ROM_GPIOPinConfigure(GPIO_PA1_U0TX);
+ ROM_GPIOPinTypeUART(GPIO_PORTA_BASE, GPIO_PIN_0 | GPIO_PIN_1);
+
+ //
+ // Use the internal 16MHz oscillator as the UART clock source.
+ //
+ UARTClockSourceSet(UART0_BASE, UART_CLOCK_PIOSC);
+
+ //
+ // Initialize the UART for console I/O.
+ //
+ UARTStdioConfig(0, 115200, 16000000);
+}
+
+//*****************************************************************************
+//
+// This is the main example program. It checks to see that the interrupts are
+// processed in the correct order when they have identical priorities,
+// increasing priorities, and decreasing priorities. This exercises interrupt
+// preemption and tail chaining.
+//
+//*****************************************************************************
+int
+main(void)
+{
+ uint32_t ui32Error;
+
+ //
+ // Enable lazy stacking for interrupt handlers. This allows floating-point
+ // instructions to be used within interrupt handlers, but at the expense of
+ // extra stack usage.
+ //
+ ROM_FPULazyStackingEnable();
+
+ //
+ // Set the clocking to run directly from the crystal.
+ //
+ ROM_SysCtlClockSet(SYSCTL_SYSDIV_1 | SYSCTL_USE_OSC | SYSCTL_OSC_MAIN |
+ SYSCTL_XTAL_16MHZ);
+
+ //
+ // Enable the peripherals used by this example.
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOE);
+
+ //
+ // Initialize the UART.
+ //
+ ConfigureUART();
+
+ UARTprintf("\033[2JInterrupts\n");
+
+ //
+ // Configure the PB0-PB2 to be outputs to indicate entry/exit of one
+ // of the interrupt handlers.
+ //
+ ROM_GPIOPinTypeGPIOOutput(GPIO_PORTE_BASE, GPIO_PIN_1 | GPIO_PIN_2 |
+ GPIO_PIN_3);
+ ROM_GPIOPinWrite(GPIO_PORTE_BASE, GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_3, 0);
+
+ //
+ // Set up and enable the SysTick timer. It will be used as a reference
+ // for delay loops in the interrupt handlers. The SysTick timer period
+ // will be set up for one second.
+ //
+ ROM_SysTickPeriodSet(ROM_SysCtlClockGet());
+ ROM_SysTickEnable();
+
+ //
+ // Reset the error indicator.
+ //
+ ui32Error = 0;
+
+ //
+ // Enable interrupts to the processor.
+ //
+ ROM_IntMasterEnable();
+
+ //
+ // Enable the interrupts.
+ //
+ ROM_IntEnable(INT_GPIOA);
+ ROM_IntEnable(INT_GPIOB);
+ ROM_IntEnable(INT_GPIOC);
+
+ //
+ // Indicate that the equal interrupt priority test is beginning.
+ //
+ UARTprintf("\nEqual Priority\n");
+
+ //
+ // Set the interrupt priorities so they are all equal.
+ //
+ ROM_IntPrioritySet(INT_GPIOA, 0x00);
+ ROM_IntPrioritySet(INT_GPIOB, 0x00);
+ ROM_IntPrioritySet(INT_GPIOC, 0x00);
+
+ //
+ // Reset the interrupt flags.
+ //
+ g_ui32GPIOa = 0;
+ g_ui32GPIOb = 0;
+ g_ui32GPIOc = 0;
+ g_ui32Index = 1;
+
+ //
+ // Trigger the interrupt for GPIO C.
+ //
+ HWREG(NVIC_SW_TRIG) = INT_GPIOC - 16;
+
+ //
+ // Put the current interrupt state on the LCD.
+ //
+ DisplayIntStatus();
+
+ //
+ // Verify that the interrupts were processed in the correct order.
+ //
+ if((g_ui32GPIOa != 3) || (g_ui32GPIOb != 2) || (g_ui32GPIOc != 1))
+ {
+ ui32Error |= 1;
+ }
+
+ //
+ // Wait two seconds.
+ //
+ Delay(2);
+
+ //
+ // Indicate that the decreasing interrupt priority test is beginning.
+ //
+ UARTprintf("\nDecreasing Priority\n");
+
+ //
+ // Set the interrupt priorities so that they are decreasing (i.e. C > B >
+ // A).
+ //
+ ROM_IntPrioritySet(INT_GPIOA, 0x80);
+ ROM_IntPrioritySet(INT_GPIOB, 0x40);
+ ROM_IntPrioritySet(INT_GPIOC, 0x00);
+
+ //
+ // Reset the interrupt flags.
+ //
+ g_ui32GPIOa = 0;
+ g_ui32GPIOb = 0;
+ g_ui32GPIOc = 0;
+ g_ui32Index = 1;
+
+ //
+ // Trigger the interrupt for GPIO C.
+ //
+ HWREG(NVIC_SW_TRIG) = INT_GPIOC - 16;
+
+ //
+ // Put the current interrupt state on the UART.
+ //
+ DisplayIntStatus();
+
+ //
+ // Verify that the interrupts were processed in the correct order.
+ //
+ if((g_ui32GPIOa != 3) || (g_ui32GPIOb != 2) || (g_ui32GPIOc != 1))
+ {
+ ui32Error |= 2;
+ }
+
+ //
+ // Wait two seconds.
+ //
+ Delay(2);
+
+ //
+ // Indicate that the increasing interrupt priority test is beginning.
+ //
+ UARTprintf("\nIncreasing Priority\n");
+
+ //
+ // Set the interrupt priorities so that they are increasing (i.e. C < B <
+ // A).
+ //
+ ROM_IntPrioritySet(INT_GPIOA, 0x00);
+ ROM_IntPrioritySet(INT_GPIOB, 0x40);
+ ROM_IntPrioritySet(INT_GPIOC, 0x80);
+
+ //
+ // Reset the interrupt flags.
+ //
+ g_ui32GPIOa = 0;
+ g_ui32GPIOb = 0;
+ g_ui32GPIOc = 0;
+ g_ui32Index = 1;
+
+ //
+ // Trigger the interrupt for GPIO C.
+ //
+ HWREG(NVIC_SW_TRIG) = INT_GPIOC - 16;
+
+ //
+ // Put the current interrupt state on the UART.
+ //
+ DisplayIntStatus();
+
+ //
+ // Verify that the interrupts were processed in the correct order.
+ //
+ if((g_ui32GPIOa != 1) || (g_ui32GPIOb != 2) || (g_ui32GPIOc != 3))
+ {
+ ui32Error |= 4;
+ }
+
+ //
+ // Wait two seconds.
+ //
+ Delay(2);
+
+ //
+ // Disable the interrupts.
+ //
+ ROM_IntDisable(INT_GPIOA);
+ ROM_IntDisable(INT_GPIOB);
+ ROM_IntDisable(INT_GPIOC);
+
+ //
+ // Disable interrupts to the processor.
+ //
+ ROM_IntMasterDisable();
+
+ //
+ // Print out the test results.
+ //
+ UARTprintf("\nInterrupt Priority =: %s >: %s <: %s\n",
+ (ui32Error & 1) ? "Fail" : "Pass",
+ (ui32Error & 2) ? "Fail" : "Pass",
+ (ui32Error & 4) ? "Fail" : "Pass");
+
+ //
+ // Loop forever.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/interrupts/interrupts.ewd b/boards/ek-tm4c123gxl/interrupts/interrupts.ewd new file mode 100644 index 0000000..7a32408 --- /dev/null +++ b/boards/ek-tm4c123gxl/interrupts/interrupts.ewd @@ -0,0 +1,614 @@ +<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+ <fileVersion>1</fileVersion>
+ <configuration>
+ <name>Debug</name>
+ <toolchain>
+ <name>ARM</name>
+ </toolchain>
+ <debug>1</debug>
+ <settings>
+ <name>C-SPY</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>15</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CInput</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CEndian</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCVariant</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>MemOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MemFile</name>
+ <state>$TOOLKIT_DIR$\CONFIG\debugger\TexasInstruments\tm4c123gh6pm</state>
+ </option>
+ <option>
+ <name>RunToEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>RunToName</name>
+ <state>main</state>
+ </option>
+ <option>
+ <name>CExtraOptionsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCDDFArgumentProducer</name>
+ <state></state>
+ </option>
+ <option>
+ <name>OCDownloadSuppressDownload</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDownloadVerifyAll</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OCDynDriverList</name>
+ <state>LMIFTDI_ID</state>
+ </option>
+ <option>
+ <name>OCLastSavedByProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OCDownloadAttachToProgram</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FlashLoaders</name>
+ <state>,,,,(default),</state>
+ </option>
+ <option>
+ <name>UseFlashLoader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CLowLevel</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCBE8Slave</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ARMSIM_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCSimDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCSimEnablePSP</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCSimPspOverrideConfig</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCSimPspConfigFile</name>
+ <state></state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ANGEL_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CCAngelHeartbeat</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CAngelCommunication</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CAngelCommBaud</name>
+ <version>0</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>CAngelCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ANGELTCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoAngelLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AngelLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>GDBSERVER_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>TCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>LogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCJTagBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>IARROM_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CRomLogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomLogFileEditB</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CRomCommunication</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomCommBaud</name>
+ <version>0</version>
+ <state>7</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>JLINK_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>9</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>JLinkSpeed</name>
+ <state>32</state>
+ </option>
+ <option>
+ <name>CCJLinkDoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCJLinkHWResetDelay</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>JLinkInitialSpeed</name>
+ <state>32</state>
+ </option>
+ <option>
+ <name>CCDoJlinkMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCScanChainNonARMDevices</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkIRLength</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkCommRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkTCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>CCJLinkSpeedRadioV2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCUSBDevice</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchUndef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchSWI</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchData</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchPrefetch</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchIRQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchFIQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ <option>
+ <name>CCJLinkInterfaceRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCJLinkAttachSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCJLinkResetList</name>
+ <version>0</version>
+ <state>5</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>LMIFTDI_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>LmiftdiSpeed</name>
+ <state>500</state>
+ </option>
+ <option>
+ <name>CCLmiftdiDoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCLmiftdiLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>MACRAIGOR_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>2</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>jtag</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>EmuSpeed</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>TCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>LogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>DoEmuMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>EmuMultiTarget</name>
+ <state>0@ARM7TDMI</state>
+ </option>
+ <option>
+ <name>EmuHWReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CEmuCommBaud</name>
+ <version>0</version>
+ <state>4</state>
+ </option>
+ <option>
+ <name>CEmuCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>jtago</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>UnusedAddr</name>
+ <state>0x00800000</state>
+ </option>
+ <option>
+ <name>CCMacraigorHWResetDelay</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCJTagBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>RDI_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CRDIDriverDll</name>
+ <state>Browse to your RDI driver</state>
+ </option>
+ <option>
+ <name>CRDILogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRDILogFileEdit</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCRDIHWReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchUndef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchSWI</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchData</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchPrefetch</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchIRQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchFIQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDIUseETM</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>THIRDPARTY_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CThirdPartyDriverDll</name>
+ <state>Browse to your third-party driver</state>
+ </option>
+ <option>
+ <name>CThirdPartyLogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CThirdPartyLogFileEditB</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <debuggerPlugins>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\OSE\OseEpsilonPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Profiling\Profiling.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ </debuggerPlugins>
+ </configuration>
+</project>
diff --git a/boards/ek-tm4c123gxl/interrupts/interrupts.ewp b/boards/ek-tm4c123gxl/interrupts/interrupts.ewp new file mode 100644 index 0000000..1b5721c --- /dev/null +++ b/boards/ek-tm4c123gxl/interrupts/interrupts.ewp @@ -0,0 +1,787 @@ +<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+ <fileVersion>1</fileVersion>
+ <configuration>
+ <name>Debug</name>
+ <toolchain>
+ <name>ARM</name>
+ </toolchain>
+ <debug>1</debug>
+ <settings>
+ <name>General</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <version>14</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>ExePath</name>
+ <state>ewarm\Exe</state>
+ </option>
+ <option>
+ <name>ObjPath</name>
+ <state>ewarm\Obj</state>
+ </option>
+ <option>
+ <name>ListPath</name>
+ <state>ewarm\List</state>
+ </option>
+ <option>
+ <name>Variant</name>
+ <version>19</version>
+ <state>39</state>
+ </option>
+ <option>
+ <name>GEndianMode</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>Input variant</name>
+ <version>1</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>Input description</name>
+ <state>No specifier n, no float nor long long, no scan set, no assignment suppressing.</state>
+ </option>
+ <option>
+ <name>Output variant</name>
+ <version>0</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>Output description</name>
+ <state>No specifier a, A, no specifier n, no float nor long long, no flags.</state>
+ </option>
+ <option>
+ <name>GOutputBinary</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FPU</name>
+ <version>2</version>
+ <state>5</state>
+ </option>
+ <option>
+ <name>OGCoreOrChip</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelect</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelectSlave</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>RTDescription</name>
+ <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+ </option>
+ <option>
+ <name>RTConfigPath</name>
+ <state>$TOOLKIT_DIR$\INC\DLib_Config_Normal.h</state>
+ </option>
+ <option>
+ <name>OGProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OGLastSavedByProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>GeneralMisraRules</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>GeneralEnableMisra</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GeneralMisraVerbose</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGChipSelectEditMenu</name>
+ <state>TM4C123GH6PM TexasInstruments TM4C123GH6PM</state>
+ </option>
+ <option>
+ <name>GenLowLevelInterface</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GEndianModeBE</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OGBufferedTerminalOutput</name>
+ <state>0</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ICCARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>19</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CCDefines</name>
+ <state>ewarm</state>
+ <state>PART_TM4C123GH6PM</state>
+ <state>TARGET_IS_TM4C123_RB1</state>
+ </option>
+ <option>
+ <name>CCPreprocFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocComments</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMnemonics</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMessages</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssSource</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagSuppress</name>
+ <state>Pa050</state>
+ </option>
+ <option>
+ <name>CCDiagRemark</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCDiagWarning</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCDiagError</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCAllowList</name>
+ <version>1</version>
+ <state>1111111</state>
+ </option>
+ <option>
+ <name>CCDebugInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IEndianMode</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IExtraOptionsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCLangConformance</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCSignedPlainChar</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCRequirePrototypes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagWarnAreErr</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCCompilerRuntimeInfo</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OutputFile</name>
+ <state>$FILE_BNAME$.o</state>
+ </option>
+ <option>
+ <name>CCLangSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCLibConfigHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>PreInclude</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CompilerMisraRules</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>CompilerMisraOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCIncludePath2</name>
+ <state>$PROJ_DIR$\..\..\..\..</state>
+ </option>
+ <option>
+ <name>CCStdIncCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCStdIncludePath</name>
+ <state>$TOOLKIT_DIR$\INC\</state>
+ </option>
+ <option>
+ <name>CCCodeSection</name>
+ <state>.text</state>
+ </option>
+ <option>
+ <name>IInterwork2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IProcessorMode2</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptLevel</name>
+ <state>3</state>
+ </option>
+ <option>
+ <name>CCOptStrategy</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptLevelSlave</name>
+ <state>3</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>AARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>7</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>AObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AEndian</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>ACaseSensitivity</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacroChars</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnEnable</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnWhat</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnOne</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AWarnRange1</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AWarnRange2</name>
+ <state></state>
+ </option>
+ <option>
+ <name>ADebug</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AltRegisterNames</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ADefines</name>
+ <state>ewarm</state>
+ </option>
+ <option>
+ <name>AList</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AListHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AListing</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>Includes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacDefs</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacExps</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacExec</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OnlyAssed</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MultiLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLengthCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLength</name>
+ <state>80</state>
+ </option>
+ <option>
+ <name>TabSpacing</name>
+ <state>8</state>
+ </option>
+ <option>
+ <name>AXRef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDefines</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefInternal</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDual</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AOutputFile</name>
+ <state>$FILE_BNAME$.o</state>
+ </option>
+ <option>
+ <name>AMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ALimitErrorsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ALimitErrorsEdit</name>
+ <state>100</state>
+ </option>
+ <option>
+ <name>AIgnoreStdInclude</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AStdIncludes</name>
+ <state>$TOOLKIT_DIR$\INC\</state>
+ </option>
+ <option>
+ <name>AUserIncludes</name>
+ <state>$PROJ_DIR$\..\..\..\..</state>
+ </option>
+ <option>
+ <name>AExtraOptionsCheckV2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AExtraOptionsV2</name>
+ <state></state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>OBJCOPY</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OOCOutputFormat</name>
+ <version>1</version>
+ <state>2</state>
+ </option>
+ <option>
+ <name>OCOutputOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OOCOutputFile</name>
+ <state>interrupts.bin</state>
+ </option>
+ <option>
+ <name>OOCCommandLineProducer</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OOCObjCopyEnable</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>CUSTOM</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <extensions></extensions>
+ <cmdline></cmdline>
+ </data>
+ </settings>
+ <settings>
+ <name>BICOMP</name>
+ <archiveVersion>0</archiveVersion>
+ <data/>
+ </settings>
+ <settings>
+ <name>BUILDACTION</name>
+ <archiveVersion>1</archiveVersion>
+ <data>
+ <prebuild></prebuild>
+ <postbuild></postbuild>
+ </data>
+ </settings>
+ <settings>
+ <name>ILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>5</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>IlinkLibIOConfig</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>XLinkMisraHandler</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkInputFileSlave</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkOutputFile</name>
+ <state>interrupts.out</state>
+ </option>
+ <option>
+ <name>IlinkDebugInfoEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkKeepSymbols</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinaryFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinarySymbol</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinarySegment</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinaryAlign</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkDefines</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkConfigDefines</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkMapFile</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkLogFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogInitialization</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogModule</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogSection</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogVeneer</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkIcfOverride</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkIcfFile</name>
+ <state>$PROJ_DIR$\interrupts.icf</state>
+ </option>
+ <option>
+ <name>IlinkIcfFileSlave</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkSuppressDiags</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsRem</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsWarn</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsErr</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkWarningsAreErrors</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkUseExtraOptions</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkLowLevelInterfaceSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAutoLibEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAdditionalLibs</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkOverrideProgramEntryLabel</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabelSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabel</name>
+ <state>__iar_program_start</state>
+ </option>
+ <option>
+ <name>IlinkNXPLPCChecksum</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>DoFill</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FillerByte</name>
+ <state>0xFF</state>
+ </option>
+ <option>
+ <name>FillerStart</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>FillerEnd</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>CrcSize</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcAlign</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcAlgo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcPoly</name>
+ <state>0x11021</state>
+ </option>
+ <option>
+ <name>CrcCompl</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcBitOrder</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcInitialValue</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>DoCrc</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkBE8Slave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkBufferedTerminalOutput</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>IARCHIVE</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>IarchiveInputs</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IarchiveOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IarchiveOutput</name>
+ <state>###Unitialized###</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>BILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data/>
+ </settings>
+ </configuration>
+ <group>
+ <name>Libraries</name>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\driverlib\ewarm\Exe\driverlib.a</name>
+ </file>
+ </group>
+ <group>
+ <name>Source</name>
+ <file>
+ <name>$PROJ_DIR$\interrupts.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\startup_ewarm.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\utils\uartstdio.c</name>
+ </file>
+ </group>
+</project>
diff --git a/boards/ek-tm4c123gxl/interrupts/interrupts.icf b/boards/ek-tm4c123gxl/interrupts/interrupts.icf new file mode 100644 index 0000000..14d291c --- /dev/null +++ b/boards/ek-tm4c123gxl/interrupts/interrupts.icf @@ -0,0 +1,78 @@ +//*****************************************************************************
+//
+// interrupts.icf - Linker configuration file for interrupts.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+//
+// Define a memory region that covers the entire 4 GB addressible space of the
+// processor.
+//
+define memory mem with size = 4G;
+
+//
+// Define a region for the on-chip flash.
+//
+define region FLASH = mem:[from 0x00000000 to 0x0003ffff];
+
+//
+// Define a region for the on-chip SRAM.
+//
+define region SRAM = mem:[from 0x20000000 to 0x20007fff];
+
+//
+// Define a block for the heap. The size should be set to something other
+// than zero if things in the C library that require the heap are used.
+//
+define block HEAP with alignment = 8, size = 0x00000000 { };
+
+//
+// Indicate that the read/write values should be initialized by copying from
+// flash.
+//
+initialize by copy { readwrite };
+
+//
+// Indicate that the noinit values should be left alone. This includes the
+// stack, which if initialized will destroy the return address from the
+// initialization code, causing the processor to branch to zero and fault.
+//
+do not initialize { section .noinit };
+
+//
+// Place the interrupt vectors at the start of flash.
+//
+place at start of FLASH { readonly section .intvec };
+
+//
+// Place the remainder of the read-only items into flash.
+//
+place in FLASH { readonly };
+
+//
+// Place the RAM vector table at the start of SRAM.
+//
+place at start of SRAM { section VTABLE };
+
+//
+// Place all read/write items into SRAM.
+//
+place in SRAM { readwrite, block HEAP };
diff --git a/boards/ek-tm4c123gxl/interrupts/interrupts.ld b/boards/ek-tm4c123gxl/interrupts/interrupts.ld new file mode 100644 index 0000000..68b0844 --- /dev/null +++ b/boards/ek-tm4c123gxl/interrupts/interrupts.ld @@ -0,0 +1,57 @@ +/******************************************************************************
+ *
+ * interrupts.ld - Linker configuration file for interrupts.
+ *
+ * Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+ * Software License Agreement
+ *
+ * Texas Instruments (TI) is supplying this software for use solely and
+ * exclusively on TI's microcontroller products. The software is owned by
+ * TI and/or its suppliers, and is protected under applicable copyright
+ * laws. You may not combine this software with "viral" open-source
+ * software in order to form a larger program.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+ * NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+ * NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+ * CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+ * DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ * This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+ *
+ *****************************************************************************/
+
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x00040000
+ SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000
+}
+
+SECTIONS
+{
+ .text :
+ {
+ _text = .;
+ KEEP(*(.isr_vector))
+ *(.text*)
+ *(.rodata*)
+ _etext = .;
+ } > FLASH
+
+ .data : AT(ADDR(.text) + SIZEOF(.text))
+ {
+ _data = .;
+ *(vtable)
+ *(.data*)
+ _edata = .;
+ } > SRAM
+
+ .bss :
+ {
+ _bss = .;
+ *(.bss*)
+ *(COMMON)
+ _ebss = .;
+ } > SRAM
+}
diff --git a/boards/ek-tm4c123gxl/interrupts/interrupts.sct b/boards/ek-tm4c123gxl/interrupts/interrupts.sct new file mode 100644 index 0000000..4608d4e --- /dev/null +++ b/boards/ek-tm4c123gxl/interrupts/interrupts.sct @@ -0,0 +1,47 @@ +;******************************************************************************
+;
+; interrupts.sct - Linker configuration file for interrupts.
+;
+; Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+; Software License Agreement
+;
+; Texas Instruments (TI) is supplying this software for use solely and
+; exclusively on TI's microcontroller products. The software is owned by
+; TI and/or its suppliers, and is protected under applicable copyright
+; laws. You may not combine this software with "viral" open-source
+; software in order to form a larger program.
+;
+; THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+; NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+; NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+; A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+; CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+; DAMAGES, FOR ANY REASON WHATSOEVER.
+;
+; This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+;
+;******************************************************************************
+
+LR_IROM 0x00000000 0x00040000
+{
+ ;
+ ; Specify the Execution Address of the code and the size.
+ ;
+ ER_IROM 0x00000000 0x00040000
+ {
+ *.o (RESET, +First)
+ * (InRoot$$Sections, +RO)
+ }
+
+ ;
+ ; Specify the Execution Address of the data area.
+ ;
+ RW_IRAM 0x20000000 0x00008000
+ {
+ ;
+ ; Uncomment the following line in order to use IntRegister().
+ ;
+ ;* (vtable, +First)
+ * (+RW, +ZI)
+ }
+}
diff --git a/boards/ek-tm4c123gxl/interrupts/interrupts.uvopt b/boards/ek-tm4c123gxl/interrupts/interrupts.uvopt new file mode 100644 index 0000000..51aca39 --- /dev/null +++ b/boards/ek-tm4c123gxl/interrupts/interrupts.uvopt @@ -0,0 +1,303 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+ <SchemaVersion>1.0</SchemaVersion>
+
+ <Header>### uVision Project, (C) Keil Software</Header>
+
+ <Extensions>
+ <cExt>*.c</cExt>
+ <aExt>*.s*; *.src; *.a*</aExt>
+ <oExt>*.obj</oExt>
+ <lExt>*.lib</lExt>
+ <tExt>*.txt; *.h; *.inc</tExt>
+ <pExt>*.plm</pExt>
+ <CppX>*.cpp</CppX>
+ </Extensions>
+
+ <DaveTm>
+ <dwLowDateTime>0</dwLowDateTime>
+ <dwHighDateTime>0</dwHighDateTime>
+ </DaveTm>
+
+ <Target>
+ <TargetName>interrupts</TargetName>
+ <ToolsetNumber>0x4</ToolsetNumber>
+ <ToolsetName>ARM-ADS</ToolsetName>
+ <TargetOption>
+ <CLKADS>8000000</CLKADS>
+ <OPTTT>
+ <gFlags>1</gFlags>
+ <BeepAtEnd>1</BeepAtEnd>
+ <RunSim>1</RunSim>
+ <RunTarget>0</RunTarget>
+ </OPTTT>
+ <OPTHX>
+ <HexSelection>1</HexSelection>
+ <FlashByte>65535</FlashByte>
+ <HexRangeLowAddress>0</HexRangeLowAddress>
+ <HexRangeHighAddress>0</HexRangeHighAddress>
+ <HexOffset>0</HexOffset>
+ </OPTHX>
+ <OPTLEX>
+ <PageWidth>79</PageWidth>
+ <PageLength>66</PageLength>
+ <TabStop>8</TabStop>
+ <ListingPath>.\rvmdk\</ListingPath>
+ </OPTLEX>
+ <ListingPage>
+ <CreateCListing>1</CreateCListing>
+ <CreateAListing>1</CreateAListing>
+ <CreateLListing>1</CreateLListing>
+ <CreateIListing>0</CreateIListing>
+ <AsmCond>1</AsmCond>
+ <AsmSymb>1</AsmSymb>
+ <AsmXref>0</AsmXref>
+ <CCond>1</CCond>
+ <CCode>0</CCode>
+ <CListInc>0</CListInc>
+ <CSymb>0</CSymb>
+ <LinkerCodeListing>0</LinkerCodeListing>
+ </ListingPage>
+ <OPTXL>
+ <LMap>1</LMap>
+ <LComments>1</LComments>
+ <LGenerateSymbols>1</LGenerateSymbols>
+ <LLibSym>1</LLibSym>
+ <LLines>1</LLines>
+ <LLocSym>1</LLocSym>
+ <LPubSym>1</LPubSym>
+ <LXref>0</LXref>
+ <LExpSel>0</LExpSel>
+ </OPTXL>
+ <OPTFL>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <IsCurrentTarget>1</IsCurrentTarget>
+ </OPTFL>
+ <CpuCode>255</CpuCode>
+ <Books>
+ <Book>
+ <Number>0</Number>
+ <Title>Data Sheet</Title>
+ <Path>DATASHTS\Luminary\TM4C123GH6PM.PDF</Path>
+ </Book>
+ </Books>
+ <DllOpt>
+ <SimDllName>SARMCM3.DLL</SimDllName>
+ <SimDllArguments>-MPU</SimDllArguments>
+ <SimDlgDllName>DCM.DLL</SimDlgDllName>
+ <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+ <TargetDllName>SARMCM3.DLL</TargetDllName>
+ <TargetDllArguments>-MPU</TargetDllArguments>
+ <TargetDlgDllName>TCM.DLL</TargetDlgDllName>
+ <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+ </DllOpt>
+ <DebugOpt>
+ <uSim>0</uSim>
+ <uTrg>1</uTrg>
+ <sLdApp>1</sLdApp>
+ <sGomain>1</sGomain>
+ <sRbreak>1</sRbreak>
+ <sRwatch>1</sRwatch>
+ <sRmem>1</sRmem>
+ <sRfunc>1</sRfunc>
+ <sRbox>1</sRbox>
+ <tLdApp>1</tLdApp>
+ <tGomain>0</tGomain>
+ <tRbreak>1</tRbreak>
+ <tRwatch>1</tRwatch>
+ <tRmem>1</tRmem>
+ <tRfunc>0</tRfunc>
+ <tRbox>1</tRbox>
+ <sRunDeb>0</sRunDeb>
+ <sLrtime>0</sLrtime>
+ <nTsel>4</nTsel>
+ <sDll></sDll>
+ <sDllPa></sDllPa>
+ <sDlgDll></sDlgDll>
+ <sDlgPa></sDlgPa>
+ <sIfile></sIfile>
+ <tDll></tDll>
+ <tDllPa></tDllPa>
+ <tDlgDll></tDlgDll>
+ <tDlgPa></tDlgPa>
+ <tIfile></tIfile>
+ <pMon>BIN\lmidk-agdi.dll</pMon>
+ </DebugOpt>
+ <TargetDriverDllRegistry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>lmidk-agdi</Key>
+ <Name>-O4614 -S3 -FO29</Name>
+ </SetRegEntry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>DLGTARM</Key>
+ <Name></Name>
+ </SetRegEntry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>ARMDBGFLAGS</Key>
+ <Name></Name>
+ </SetRegEntry>
+ </TargetDriverDllRegistry>
+ <DebugFlag>
+ <trace>0</trace>
+ <periodic>1</periodic>
+ <aLwin>0</aLwin>
+ <aCover>0</aCover>
+ <aSer1>0</aSer1>
+ <aSer2>0</aSer2>
+ <aPa>0</aPa>
+ <viewmode>1</viewmode>
+ <vrSel>0</vrSel>
+ <aSym>0</aSym>
+ <aTbox>0</aTbox>
+ <AscS1>0</AscS1>
+ <AscS2>0</AscS2>
+ <AscS3>0</AscS3>
+ <aSer3>0</aSer3>
+ <eProf>0</eProf>
+ <aLa>0</aLa>
+ <aPa1>0</aPa1>
+ <AscS4>0</AscS4>
+ <aSer4>0</aSer4>
+ <StkLoc>0</StkLoc>
+ <TrcWin>0</TrcWin>
+ <newCpu>0</newCpu>
+ <uProt>0</uProt>
+ </DebugFlag>
+ <LintExecutable></LintExecutable>
+ <LintConfigFile></LintConfigFile>
+ </TargetOption>
+ </Target>
+
+ <Group>
+ <GroupName>Source</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>1</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\interrupts.c</PathWithFileName>
+ <FilenameWithoutPath>interrupts.c</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>2</FileNumber>
+ <FileType>2</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\startup_rvmdk.S</PathWithFileName>
+ <FilenameWithoutPath>startup_rvmdk.S</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>3</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\utils\uartstdio.c</PathWithFileName>
+ <FilenameWithoutPath>uartstdio.c</FilenameWithoutPath>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>Libraries</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>4</FileNumber>
+ <FileType>4</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\driverlib\rvmdk\driverlib.lib</PathWithFileName>
+ <FilenameWithoutPath>driverlib.lib</FilenameWithoutPath>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>Documentation</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>3</GroupNumber>
+ <FileNumber>5</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <Focus>1</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>1</TopLine>
+ <CurrentLine>1</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\readme.txt</PathWithFileName>
+ <FilenameWithoutPath>readme.txt</FilenameWithoutPath>
+ <WindowPosition>
+ <length>44</length>
+ <flags>0</flags>
+ <showCmd>1</showCmd>
+ <MinPosition>
+ <xPos>-1</xPos>
+ <yPos>-1</yPos>
+ </MinPosition>
+ <MaxPosition>
+ <xPos>-1</xPos>
+ <yPos>-1</yPos>
+ </MaxPosition>
+ <NormalPosition>
+ <Top>0</Top>
+ <Left>0</Left>
+ <Right>729</Right>
+ <Bottom>300</Bottom>
+ </NormalPosition>
+ </WindowPosition>
+ </File>
+ </Group>
+
+ <MDIGroups>
+ <Orientation>1</Orientation>
+ <ActiveMDIGroup>0</ActiveMDIGroup>
+ <MDIGroup>
+ <Size>100</Size>
+ <ActiveTab>0</ActiveTab>
+ <Documents>
+ <Doc>
+ <Name>.\readme.txt</Name>
+ <ColumnNumber>0</ColumnNumber>
+ <TopLine>1</TopLine>
+ <CurrentLine>1</CurrentLine>
+ </Doc>
+ </Documents>
+ </MDIGroup>
+ </MDIGroups>
+
+</ProjectOpt>
diff --git a/boards/ek-tm4c123gxl/interrupts/interrupts.uvproj b/boards/ek-tm4c123gxl/interrupts/interrupts.uvproj new file mode 100644 index 0000000..0a02893 --- /dev/null +++ b/boards/ek-tm4c123gxl/interrupts/interrupts.uvproj @@ -0,0 +1,429 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+ <SchemaVersion>1.1</SchemaVersion>
+
+ <Header>### uVision Project, (C) Keil Software</Header>
+
+ <Targets>
+ <Target>
+ <TargetName>interrupts</TargetName>
+ <ToolsetNumber>0x4</ToolsetNumber>
+ <ToolsetName>ARM-ADS</ToolsetName>
+ <TargetOption>
+ <TargetCommonOption>
+ <Device>TM4C123GH6PM</Device>
+ <Vendor>Texas Instruments</Vendor>
+ <Cpu>IRAM(0x20000000-0x20007FFF) IROM(0-0x3FFFF) CLOCK(8000000) CPUTYPE("Cortex-M4") FPU2</Cpu>
+ <FlashUtilSpec></FlashUtilSpec>
+ <StartupFile>"STARTUP\Luminary\Startup.s" ("Luminary Startup Code")</StartupFile>
+ <FlashDriverDll>UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0LM4F_256 -FS00 -FL040000)</FlashDriverDll>
+ <DeviceId>5919</DeviceId>
+ <RegisterFile>LM4Fxxxx.H</RegisterFile>
+ <MemoryEnv></MemoryEnv>
+ <Cmp></Cmp>
+ <Asm></Asm>
+ <Linker></Linker>
+ <OHString></OHString>
+ <InfinionOptionDll></InfinionOptionDll>
+ <SLE66CMisc></SLE66CMisc>
+ <SLE66AMisc></SLE66AMisc>
+ <SLE66LinkerMisc></SLE66LinkerMisc>
+ <UseEnv>0</UseEnv>
+ <BinPath></BinPath>
+ <IncludePath></IncludePath>
+ <LibPath></LibPath>
+ <RegisterFilePath>Luminary\</RegisterFilePath>
+ <DBRegisterFilePath>Luminary\</DBRegisterFilePath>
+ <TargetStatus>
+ <Error>0</Error>
+ <ExitCodeStop>0</ExitCodeStop>
+ <ButtonStop>0</ButtonStop>
+ <NotGenerated>0</NotGenerated>
+ <InvalidFlash>1</InvalidFlash>
+ </TargetStatus>
+ <OutputDirectory>.\rvmdk\</OutputDirectory>
+ <OutputName>interrupts</OutputName>
+ <CreateExecutable>1</CreateExecutable>
+ <CreateLib>0</CreateLib>
+ <CreateHexFile>0</CreateHexFile>
+ <DebugInformation>1</DebugInformation>
+ <BrowseInformation>1</BrowseInformation>
+ <ListingPath>.\rvmdk\</ListingPath>
+ <HexFormatSelection>1</HexFormatSelection>
+ <Merge32K>0</Merge32K>
+ <CreateBatchFile>0</CreateBatchFile>
+ <BeforeCompile>
+ <RunUserProg1>0</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name></UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </BeforeCompile>
+ <BeforeMake>
+ <RunUserProg1>0</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name></UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </BeforeMake>
+ <AfterMake>
+ <RunUserProg1>1</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name>fromelf --bin --output .\rvmdk\interrupts.bin .\rvmdk\interrupts.axf</UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </AfterMake>
+ <SelectedForBatchBuild>0</SelectedForBatchBuild>
+ <SVCSIdString></SVCSIdString>
+ </TargetCommonOption>
+ <CommonProperty>
+ <UseCPPCompiler>0</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <DllOption>
+ <SimDllName>SARMCM3.DLL</SimDllName>
+ <SimDllArguments>-MPU</SimDllArguments>
+ <SimDlgDll>DCM.DLL</SimDlgDll>
+ <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+ <TargetDllName>SARMCM3.DLL</TargetDllName>
+ <TargetDllArguments>-MPU</TargetDllArguments>
+ <TargetDlgDll>TCM.DLL</TargetDlgDll>
+ <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+ </DllOption>
+ <DebugOption>
+ <OPTHX>
+ <HexSelection>1</HexSelection>
+ <HexRangeLowAddress>0</HexRangeLowAddress>
+ <HexRangeHighAddress>0</HexRangeHighAddress>
+ <HexOffset>0</HexOffset>
+ <Oh166RecLen>16</Oh166RecLen>
+ </OPTHX>
+ <Simulator>
+ <UseSimulator>0</UseSimulator>
+ <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+ <RunToMain>1</RunToMain>
+ <RestoreBreakpoints>1</RestoreBreakpoints>
+ <RestoreWatchpoints>1</RestoreWatchpoints>
+ <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+ <RestoreFunctions>1</RestoreFunctions>
+ <RestoreToolbox>1</RestoreToolbox>
+ <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+ </Simulator>
+ <Target>
+ <UseTarget>1</UseTarget>
+ <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+ <RunToMain>0</RunToMain>
+ <RestoreBreakpoints>1</RestoreBreakpoints>
+ <RestoreWatchpoints>1</RestoreWatchpoints>
+ <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+ <RestoreFunctions>0</RestoreFunctions>
+ <RestoreToolbox>1</RestoreToolbox>
+ </Target>
+ <RunDebugAfterBuild>0</RunDebugAfterBuild>
+ <TargetSelection>4</TargetSelection>
+ <SimDlls>
+ <CpuDll></CpuDll>
+ <CpuDllArguments></CpuDllArguments>
+ <PeripheralDll></PeripheralDll>
+ <PeripheralDllArguments></PeripheralDllArguments>
+ <InitializationFile></InitializationFile>
+ </SimDlls>
+ <TargetDlls>
+ <CpuDll></CpuDll>
+ <CpuDllArguments></CpuDllArguments>
+ <PeripheralDll></PeripheralDll>
+ <PeripheralDllArguments></PeripheralDllArguments>
+ <InitializationFile></InitializationFile>
+ <Driver>BIN\lmidk-agdi.dll</Driver>
+ </TargetDlls>
+ </DebugOption>
+ <Utilities>
+ <Flash1>
+ <UseTargetDll>1</UseTargetDll>
+ <UseExternalTool>0</UseExternalTool>
+ <RunIndependent>0</RunIndependent>
+ <UpdateFlashBeforeDebugging>0</UpdateFlashBeforeDebugging>
+ <Capability>1</Capability>
+ <DriverSelection>4099</DriverSelection>
+ </Flash1>
+ <Flash2>BIN\lmidk-agdi.dll</Flash2>
+ <Flash3></Flash3>
+ <Flash4></Flash4>
+ </Utilities>
+ <TargetArmAds>
+ <ArmAdsMisc>
+ <GenerateListings>0</GenerateListings>
+ <asHll>1</asHll>
+ <asAsm>1</asAsm>
+ <asMacX>1</asMacX>
+ <asSyms>1</asSyms>
+ <asFals>1</asFals>
+ <asDbgD>1</asDbgD>
+ <asForm>1</asForm>
+ <ldLst>0</ldLst>
+ <ldmm>1</ldmm>
+ <ldXref>1</ldXref>
+ <BigEnd>0</BigEnd>
+ <AdsALst>0</AdsALst>
+ <AdsACrf>0</AdsACrf>
+ <AdsANop>0</AdsANop>
+ <AdsANot>0</AdsANot>
+ <AdsLLst>1</AdsLLst>
+ <AdsLmap>1</AdsLmap>
+ <AdsLcgr>1</AdsLcgr>
+ <AdsLsym>1</AdsLsym>
+ <AdsLszi>1</AdsLszi>
+ <AdsLtoi>1</AdsLtoi>
+ <AdsLsun>1</AdsLsun>
+ <AdsLven>1</AdsLven>
+ <AdsLsxf>1</AdsLsxf>
+ <RvctClst>0</RvctClst>
+ <GenPPlst>0</GenPPlst>
+ <AdsCpuType>"Cortex-M4"</AdsCpuType>
+ <RvctDeviceName></RvctDeviceName>
+ <mOS>0</mOS>
+ <uocRom>0</uocRom>
+ <uocRam>0</uocRam>
+ <hadIROM>1</hadIROM>
+ <hadIRAM>1</hadIRAM>
+ <hadXRAM>0</hadXRAM>
+ <uocXRam>0</uocXRam>
+ <RvdsVP>2</RvdsVP>
+ <hadIRAM2>0</hadIRAM2>
+ <hadIROM2>0</hadIROM2>
+ <StupSel>8</StupSel>
+ <useUlib>1</useUlib>
+ <EndSel>0</EndSel>
+ <uLtcg>0</uLtcg>
+ <RoSelD>3</RoSelD>
+ <RwSelD>3</RwSelD>
+ <CodeSel>0</CodeSel>
+ <OptFeed>0</OptFeed>
+ <NoZi1>0</NoZi1>
+ <NoZi2>0</NoZi2>
+ <NoZi3>0</NoZi3>
+ <NoZi4>0</NoZi4>
+ <NoZi5>0</NoZi5>
+ <Ro1Chk>0</Ro1Chk>
+ <Ro2Chk>0</Ro2Chk>
+ <Ro3Chk>0</Ro3Chk>
+ <Ir1Chk>1</Ir1Chk>
+ <Ir2Chk>0</Ir2Chk>
+ <Ra1Chk>0</Ra1Chk>
+ <Ra2Chk>0</Ra2Chk>
+ <Ra3Chk>0</Ra3Chk>
+ <Im1Chk>1</Im1Chk>
+ <Im2Chk>0</Im2Chk>
+ <OnChipMemories>
+ <Ocm1>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm1>
+ <Ocm2>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm2>
+ <Ocm3>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm3>
+ <Ocm4>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm4>
+ <Ocm5>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm5>
+ <Ocm6>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm6>
+ <IRAM>
+ <Type>0</Type>
+ <StartAddress>0x20000000</StartAddress>
+ <Size>0x8000</Size>
+ </IRAM>
+ <IROM>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x40000</Size>
+ </IROM>
+ <XRAM>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </XRAM>
+ <OCR_RVCT1>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT1>
+ <OCR_RVCT2>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT2>
+ <OCR_RVCT3>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT3>
+ <OCR_RVCT4>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x40000</Size>
+ </OCR_RVCT4>
+ <OCR_RVCT5>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT5>
+ <OCR_RVCT6>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT6>
+ <OCR_RVCT7>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT7>
+ <OCR_RVCT8>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT8>
+ <OCR_RVCT9>
+ <Type>0</Type>
+ <StartAddress>0x20000000</StartAddress>
+ <Size>0x8000</Size>
+ </OCR_RVCT9>
+ <OCR_RVCT10>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT10>
+ </OnChipMemories>
+ <RvctStartVector></RvctStartVector>
+ </ArmAdsMisc>
+ <Cads>
+ <interw>0</interw>
+ <Optim>3</Optim>
+ <oTime>0</oTime>
+ <SplitLS>0</SplitLS>
+ <OneElfS>1</OneElfS>
+ <Strict>0</Strict>
+ <EnumInt>0</EnumInt>
+ <PlainCh>0</PlainCh>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <wLevel>2</wLevel>
+ <uThumb>0</uThumb>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define>rvmdk PART_TM4C123GH6PM TARGET_IS_TM4C123_RB1</Define>
+ <Undefine></Undefine>
+ <IncludePath>..\..\..\..;</IncludePath>
+ </VariousControls>
+ </Cads>
+ <Aads>
+ <interw>1</interw>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <thumb>0</thumb>
+ <SplitLS>0</SplitLS>
+ <SwStkChk>0</SwStkChk>
+ <NoWarn>0</NoWarn>
+ <VariousControls>
+ <MiscControls></MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Aads>
+ <LDads>
+ <umfTarg>0</umfTarg>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <noStLib>0</noStLib>
+ <RepFail>1</RepFail>
+ <useFile>0</useFile>
+ <TextAddressRange>0x00000000</TextAddressRange>
+ <DataAddressRange>0x20000000</DataAddressRange>
+ <ScatterFile>interrupts.sct</ScatterFile>
+ <IncludeLibs></IncludeLibs>
+ <IncludeLibsPath></IncludeLibsPath>
+ <Misc>--entry Reset_Handler</Misc>
+ <LinkerInputFile></LinkerInputFile>
+ <DisabledWarnings></DisabledWarnings>
+ </LDads>
+ </TargetArmAds>
+ </TargetOption>
+ <Groups>
+ <Group>
+ <GroupName>Source</GroupName>
+ <Files>
+ <File>
+ <FileName>interrupts.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>.\interrupts.c</FilePath>
+ </File>
+ <File>
+ <FileName>startup_rvmdk.S</FileName>
+ <FileType>2</FileType>
+ <FilePath>.\startup_rvmdk.S</FilePath>
+ </File>
+ <File>
+ <FileName>uartstdio.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>..\..\..\..\utils\uartstdio.c</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>Libraries</GroupName>
+ <Files>
+ <File>
+ <FileName>driverlib.lib</FileName>
+ <FileType>4</FileType>
+ <FilePath>..\..\..\..\driverlib\rvmdk\driverlib.lib</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>Documentation</GroupName>
+ <Files>
+ <File>
+ <FileName>readme.txt</FileName>
+ <FileType>5</FileType>
+ <FilePath>.\readme.txt</FilePath>
+ </File>
+ </Files>
+ </Group>
+ </Groups>
+ </Target>
+ </Targets>
+
+</Project>
diff --git a/boards/ek-tm4c123gxl/interrupts/interrupts_ccs.cmd b/boards/ek-tm4c123gxl/interrupts/interrupts_ccs.cmd new file mode 100644 index 0000000..09913c9 --- /dev/null +++ b/boards/ek-tm4c123gxl/interrupts/interrupts_ccs.cmd @@ -0,0 +1,70 @@ +/******************************************************************************
+ *
+ * interrupts_ccs.cmd - CCS linker configuration file for interrupts.
+ *
+ * Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+ * Software License Agreement
+ *
+ * Texas Instruments (TI) is supplying this software for use solely and
+ * exclusively on TI's microcontroller products. The software is owned by
+ * TI and/or its suppliers, and is protected under applicable copyright
+ * laws. You may not combine this software with "viral" open-source
+ * software in order to form a larger program.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+ * NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+ * NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+ * CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+ * DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ * This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+ *
+ *****************************************************************************/
+
+--retain=g_pfnVectors
+
+/* The following command line options are set as part of the CCS project. */
+/* If you are building using the command line, or for some reason want to */
+/* define them here, you can uncomment and modify these lines as needed. */
+/* If you are using CCS for building, it is probably better to make any such */
+/* modifications in your CCS project and leave this file alone. */
+/* */
+/* --heap_size=0 */
+/* --stack_size=256 */
+/* --library=rtsv7M3_T_le_eabi.lib */
+
+/* The starting address of the application. Normally the interrupt vectors */
+/* must be located at the beginning of the application. */
+#define APP_BASE 0x00000000
+#define RAM_BASE 0x20000000
+
+/* System memory map */
+
+MEMORY
+{
+ /* Application stored in and executes from internal flash */
+ FLASH (RX) : origin = APP_BASE, length = 0x00040000
+ /* Application uses internal RAM for data */
+ SRAM (RWX) : origin = 0x20000000, length = 0x00008000
+}
+
+/* Section allocation in memory */
+
+SECTIONS
+{
+ .intvecs: > APP_BASE
+ .text : > FLASH
+ .const : > FLASH
+ .cinit : > FLASH
+ .pinit : > FLASH
+ .init_array : > FLASH
+
+ .vtable : > RAM_BASE
+ .data : > SRAM
+ .bss : > SRAM
+ .sysmem : > SRAM
+ .stack : > SRAM
+}
+
+__STACK_TOP = __stack + 512;
diff --git a/boards/ek-tm4c123gxl/interrupts/readme.txt b/boards/ek-tm4c123gxl/interrupts/readme.txt new file mode 100644 index 0000000..37fb525 --- /dev/null +++ b/boards/ek-tm4c123gxl/interrupts/readme.txt @@ -0,0 +1,33 @@ +Interrupts
+
+This example application demonstrates the interrupt preemption and
+tail-chaining capabilities of Cortex-M4 microprocessor and NVIC. Nested
+interrupts are synthesized when the interrupts have the same priority,
+increasing priorities, and decreasing priorities. With increasing
+priorities, preemption will occur; in the other two cases tail-chaining
+will occur. The currently pending interrupts and the currently executing
+interrupt will be displayed on the display; GPIO pins E1, E2 and E3 will
+be asserted upon interrupt handler entry and de-asserted before interrupt
+handler exit so that the off-to-on time can be observed with a scope or
+logic analyzer to see the speed of tail-chaining (for the two cases where
+tail-chaining is occurring).
+
+-------------------------------------------------------------------------------
+
+Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+Software License Agreement
+
+Texas Instruments (TI) is supplying this software for use solely and
+exclusively on TI's microcontroller products. The software is owned by
+TI and/or its suppliers, and is protected under applicable copyright
+laws. You may not combine this software with "viral" open-source
+software in order to form a larger program.
+
+THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+DAMAGES, FOR ANY REASON WHATSOEVER.
+
+This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
diff --git a/boards/ek-tm4c123gxl/interrupts/rvmdk/interrupts.axf b/boards/ek-tm4c123gxl/interrupts/rvmdk/interrupts.axf Binary files differnew file mode 100644 index 0000000..d550625 --- /dev/null +++ b/boards/ek-tm4c123gxl/interrupts/rvmdk/interrupts.axf diff --git a/boards/ek-tm4c123gxl/interrupts/rvmdk/interrupts.bin b/boards/ek-tm4c123gxl/interrupts/rvmdk/interrupts.bin Binary files differnew file mode 100644 index 0000000..f51533a --- /dev/null +++ b/boards/ek-tm4c123gxl/interrupts/rvmdk/interrupts.bin diff --git a/boards/ek-tm4c123gxl/interrupts/startup_ccs.c b/boards/ek-tm4c123gxl/interrupts/startup_ccs.c new file mode 100644 index 0000000..e21b5ec --- /dev/null +++ b/boards/ek-tm4c123gxl/interrupts/startup_ccs.c @@ -0,0 +1,304 @@ +//*****************************************************************************
+//
+// startup_ccs.c - Startup code for use with TI's Code Composer Studio.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// External declaration for the reset handler that is to be called when the
+// processor is started
+//
+//*****************************************************************************
+extern void _c_int00(void);
+
+//*****************************************************************************
+//
+// Linker variable that marks the top of the stack.
+//
+//*****************************************************************************
+extern uint32_t __STACK_TOP;
+
+//*****************************************************************************
+//
+// External declarations for the interrupt handlers used by the application.
+//
+//*****************************************************************************
+extern void IntGPIOa(void);
+extern void IntGPIOb(void);
+extern void IntGPIOc(void);
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000 or at the start of
+// the program if located at a start address other than 0.
+//
+//*****************************************************************************
+#pragma DATA_SECTION(g_pfnVectors, ".intvecs")
+void (* const g_pfnVectors[])(void) =
+{
+ (void (*)(void))((uint32_t)&__STACK_TOP),
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ IntDefaultHandler, // The SysTick handler
+ IntGPIOa, // GPIO Port A
+ IntGPIOb, // GPIO Port B
+ IntGPIOc, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ IntDefaultHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ IntDefaultHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ //
+ // Jump to the CCS C initialization routine. This will enable the
+ // floating-point unit as well, so that does not need to be done here.
+ //
+ __asm(" .global _c_int00\n"
+ " b.w _c_int00");
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/interrupts/startup_ewarm.c b/boards/ek-tm4c123gxl/interrupts/startup_ewarm.c new file mode 100644 index 0000000..c69916f --- /dev/null +++ b/boards/ek-tm4c123gxl/interrupts/startup_ewarm.c @@ -0,0 +1,335 @@ +//*****************************************************************************
+//
+// startup_ewarm.c - Startup code for use with IAR's Embedded Workbench,
+// version 5.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Enable the IAR extensions for this source file.
+//
+//*****************************************************************************
+#pragma language=extended
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// External declarations for the interrupt handlers used by the application.
+//
+//*****************************************************************************
+extern void IntGPIOa(void);
+extern void IntGPIOb(void);
+extern void IntGPIOc(void);
+
+//*****************************************************************************
+//
+// The entry point for the application startup code.
+//
+//*****************************************************************************
+extern void __iar_program_start(void);
+
+//*****************************************************************************
+//
+// Reserve space for the system stack.
+//
+//*****************************************************************************
+static uint32_t pui32Stack[128] @ ".noinit";
+
+//*****************************************************************************
+//
+// A union that describes the entries of the vector table. The union is needed
+// since the first entry is the stack pointer and the remainder are function
+// pointers.
+//
+//*****************************************************************************
+typedef union
+{
+ void (*pfnHandler)(void);
+ uint32_t ui32Ptr;
+}
+uVectorEntry;
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000.
+//
+//*****************************************************************************
+__root const uVectorEntry __vector_table[] @ ".intvec" =
+{
+ { .ui32Ptr = (uint32_t)pui32Stack + sizeof(pui32Stack) },
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ IntDefaultHandler, // The SysTick handler
+ IntGPIOa, // GPIO Port A
+ IntGPIOb, // GPIO Port B
+ IntGPIOc, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ IntDefaultHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ IntDefaultHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ //
+ // Enable the floating-point unit. This must be done here to handle the
+ // case where main() uses floating-point and the function prologue saves
+ // floating-point registers (which will fault if floating-point is not
+ // enabled). Any configuration of the floating-point unit using DriverLib
+ // APIs must be done here prior to the floating-point unit being enabled.
+ //
+ // Note that this does not use DriverLib since it might not be included in
+ // this project.
+ //
+ HWREG(NVIC_CPAC) = ((HWREG(NVIC_CPAC) &
+ ~(NVIC_CPAC_CP10_M | NVIC_CPAC_CP11_M)) |
+ NVIC_CPAC_CP10_FULL | NVIC_CPAC_CP11_FULL);
+
+ //
+ // Call the application's entry point.
+ //
+ __iar_program_start();
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/interrupts/startup_gcc.c b/boards/ek-tm4c123gxl/interrupts/startup_gcc.c new file mode 100644 index 0000000..fcba4da --- /dev/null +++ b/boards/ek-tm4c123gxl/interrupts/startup_gcc.c @@ -0,0 +1,351 @@ +//*****************************************************************************
+//
+// startup_gcc.c - Startup code for use with GNU tools.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// External declarations for the interrupt handlers used by the application.
+//
+//*****************************************************************************
+extern void IntGPIOa(void);
+extern void IntGPIOb(void);
+extern void IntGPIOc(void);
+
+//*****************************************************************************
+//
+// The entry point for the application.
+//
+//*****************************************************************************
+extern int main(void);
+
+//*****************************************************************************
+//
+// Reserve space for the system stack.
+//
+//*****************************************************************************
+static uint32_t pui32Stack[128];
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000.
+//
+//*****************************************************************************
+__attribute__ ((section(".isr_vector")))
+void (* const g_pfnVectors[])(void) =
+{
+ (void (*)(void))((uint32_t)pui32Stack + sizeof(pui32Stack)),
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ IntDefaultHandler, // The SysTick handler
+ IntGPIOa, // GPIO Port A
+ IntGPIOb, // GPIO Port B
+ IntGPIOc, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ IntDefaultHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ IntDefaultHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// The following are constructs created by the linker, indicating where the
+// the "data" and "bss" segments reside in memory. The initializers for the
+// for the "data" segment resides immediately following the "text" segment.
+//
+//*****************************************************************************
+extern uint32_t _etext;
+extern uint32_t _data;
+extern uint32_t _edata;
+extern uint32_t _bss;
+extern uint32_t _ebss;
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ uint32_t *pui32Src, *pui32Dest;
+
+ //
+ // Copy the data segment initializers from flash to SRAM.
+ //
+ pui32Src = &_etext;
+ for(pui32Dest = &_data; pui32Dest < &_edata; )
+ {
+ *pui32Dest++ = *pui32Src++;
+ }
+
+ //
+ // Zero fill the bss segment.
+ //
+ __asm(" ldr r0, =_bss\n"
+ " ldr r1, =_ebss\n"
+ " mov r2, #0\n"
+ " .thumb_func\n"
+ "zero_loop:\n"
+ " cmp r0, r1\n"
+ " it lt\n"
+ " strlt r2, [r0], #4\n"
+ " blt zero_loop");
+
+ //
+ // Enable the floating-point unit. This must be done here to handle the
+ // case where main() uses floating-point and the function prologue saves
+ // floating-point registers (which will fault if floating-point is not
+ // enabled). Any configuration of the floating-point unit using DriverLib
+ // APIs must be done here prior to the floating-point unit being enabled.
+ //
+ // Note that this does not use DriverLib since it might not be included in
+ // this project.
+ //
+ HWREG(NVIC_CPAC) = ((HWREG(NVIC_CPAC) &
+ ~(NVIC_CPAC_CP10_M | NVIC_CPAC_CP11_M)) |
+ NVIC_CPAC_CP10_FULL | NVIC_CPAC_CP11_FULL);
+
+ //
+ // Call the application's entry point.
+ //
+ main();
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/interrupts/startup_rvmdk.S b/boards/ek-tm4c123gxl/interrupts/startup_rvmdk.S new file mode 100644 index 0000000..c731354 --- /dev/null +++ b/boards/ek-tm4c123gxl/interrupts/startup_rvmdk.S @@ -0,0 +1,360 @@ +; <<< Use Configuration Wizard in Context Menu >>>
+;******************************************************************************
+;
+; startup_rvmdk.S - Startup code for use with Keil's uVision.
+;
+; Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+; Software License Agreement
+;
+; Texas Instruments (TI) is supplying this software for use solely and
+; exclusively on TI's microcontroller products. The software is owned by
+; TI and/or its suppliers, and is protected under applicable copyright
+; laws. You may not combine this software with "viral" open-source
+; software in order to form a larger program.
+;
+; THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+; NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+; NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+; A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+; CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+; DAMAGES, FOR ANY REASON WHATSOEVER.
+;
+; This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+;
+;******************************************************************************
+
+;******************************************************************************
+;
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+;******************************************************************************
+Stack EQU 0x00000200
+
+;******************************************************************************
+;
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+;******************************************************************************
+Heap EQU 0x00000000
+
+;******************************************************************************
+;
+; Allocate space for the stack.
+;
+;******************************************************************************
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+StackMem
+ SPACE Stack
+__initial_sp
+
+;******************************************************************************
+;
+; Allocate space for the heap.
+;
+;******************************************************************************
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+HeapMem
+ SPACE Heap
+__heap_limit
+
+;******************************************************************************
+;
+; Indicate that the code in this file preserves 8-byte alignment of the stack.
+;
+;******************************************************************************
+ PRESERVE8
+
+;******************************************************************************
+;
+; Place code into the reset code section.
+;
+;******************************************************************************
+ AREA RESET, CODE, READONLY
+ THUMB
+
+;******************************************************************************
+;
+; External declarations for the interrupt handlers used by the application.
+;
+;******************************************************************************
+ EXTERN IntGPIOa
+ EXTERN IntGPIOb
+ EXTERN IntGPIOc
+
+;******************************************************************************
+;
+; The vector table.
+;
+;******************************************************************************
+ EXPORT __Vectors
+__Vectors
+ DCD StackMem + Stack ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NmiSR ; NMI Handler
+ DCD FaultISR ; Hard Fault Handler
+ DCD IntDefaultHandler ; The MPU fault handler
+ DCD IntDefaultHandler ; The bus fault handler
+ DCD IntDefaultHandler ; The usage fault handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; SVCall handler
+ DCD IntDefaultHandler ; Debug monitor handler
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; The PendSV handler
+ DCD IntDefaultHandler ; The SysTick handler
+ DCD IntGPIOa ; GPIO Port A
+ DCD IntGPIOb ; GPIO Port B
+ DCD IntGPIOc ; GPIO Port C
+ DCD IntDefaultHandler ; GPIO Port D
+ DCD IntDefaultHandler ; GPIO Port E
+ DCD IntDefaultHandler ; UART0 Rx and Tx
+ DCD IntDefaultHandler ; UART1 Rx and Tx
+ DCD IntDefaultHandler ; SSI0 Rx and Tx
+ DCD IntDefaultHandler ; I2C0 Master and Slave
+ DCD IntDefaultHandler ; PWM Fault
+ DCD IntDefaultHandler ; PWM Generator 0
+ DCD IntDefaultHandler ; PWM Generator 1
+ DCD IntDefaultHandler ; PWM Generator 2
+ DCD IntDefaultHandler ; Quadrature Encoder 0
+ DCD IntDefaultHandler ; ADC Sequence 0
+ DCD IntDefaultHandler ; ADC Sequence 1
+ DCD IntDefaultHandler ; ADC Sequence 2
+ DCD IntDefaultHandler ; ADC Sequence 3
+ DCD IntDefaultHandler ; Watchdog timer
+ DCD IntDefaultHandler ; Timer 0 subtimer A
+ DCD IntDefaultHandler ; Timer 0 subtimer B
+ DCD IntDefaultHandler ; Timer 1 subtimer A
+ DCD IntDefaultHandler ; Timer 1 subtimer B
+ DCD IntDefaultHandler ; Timer 2 subtimer A
+ DCD IntDefaultHandler ; Timer 2 subtimer B
+ DCD IntDefaultHandler ; Analog Comparator 0
+ DCD IntDefaultHandler ; Analog Comparator 1
+ DCD IntDefaultHandler ; Analog Comparator 2
+ DCD IntDefaultHandler ; System Control (PLL, OSC, BO)
+ DCD IntDefaultHandler ; FLASH Control
+ DCD IntDefaultHandler ; GPIO Port F
+ DCD IntDefaultHandler ; GPIO Port G
+ DCD IntDefaultHandler ; GPIO Port H
+ DCD IntDefaultHandler ; UART2 Rx and Tx
+ DCD IntDefaultHandler ; SSI1 Rx and Tx
+ DCD IntDefaultHandler ; Timer 3 subtimer A
+ DCD IntDefaultHandler ; Timer 3 subtimer B
+ DCD IntDefaultHandler ; I2C1 Master and Slave
+ DCD IntDefaultHandler ; Quadrature Encoder 1
+ DCD IntDefaultHandler ; CAN0
+ DCD IntDefaultHandler ; CAN1
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; Hibernate
+ DCD IntDefaultHandler ; USB0
+ DCD IntDefaultHandler ; PWM Generator 3
+ DCD IntDefaultHandler ; uDMA Software Transfer
+ DCD IntDefaultHandler ; uDMA Error
+ DCD IntDefaultHandler ; ADC1 Sequence 0
+ DCD IntDefaultHandler ; ADC1 Sequence 1
+ DCD IntDefaultHandler ; ADC1 Sequence 2
+ DCD IntDefaultHandler ; ADC1 Sequence 3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; GPIO Port J
+ DCD IntDefaultHandler ; GPIO Port K
+ DCD IntDefaultHandler ; GPIO Port L
+ DCD IntDefaultHandler ; SSI2 Rx and Tx
+ DCD IntDefaultHandler ; SSI3 Rx and Tx
+ DCD IntDefaultHandler ; UART3 Rx and Tx
+ DCD IntDefaultHandler ; UART4 Rx and Tx
+ DCD IntDefaultHandler ; UART5 Rx and Tx
+ DCD IntDefaultHandler ; UART6 Rx and Tx
+ DCD IntDefaultHandler ; UART7 Rx and Tx
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; I2C2 Master and Slave
+ DCD IntDefaultHandler ; I2C3 Master and Slave
+ DCD IntDefaultHandler ; Timer 4 subtimer A
+ DCD IntDefaultHandler ; Timer 4 subtimer B
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; Timer 5 subtimer A
+ DCD IntDefaultHandler ; Timer 5 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 0 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 0 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 1 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 1 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 2 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 2 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 3 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 3 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 4 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 4 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 5 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 5 subtimer B
+ DCD IntDefaultHandler ; FPU
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; I2C4 Master and Slave
+ DCD IntDefaultHandler ; I2C5 Master and Slave
+ DCD IntDefaultHandler ; GPIO Port M
+ DCD IntDefaultHandler ; GPIO Port N
+ DCD IntDefaultHandler ; Quadrature Encoder 2
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; GPIO Port P (Summary or P0)
+ DCD IntDefaultHandler ; GPIO Port P1
+ DCD IntDefaultHandler ; GPIO Port P2
+ DCD IntDefaultHandler ; GPIO Port P3
+ DCD IntDefaultHandler ; GPIO Port P4
+ DCD IntDefaultHandler ; GPIO Port P5
+ DCD IntDefaultHandler ; GPIO Port P6
+ DCD IntDefaultHandler ; GPIO Port P7
+ DCD IntDefaultHandler ; GPIO Port Q (Summary or Q0)
+ DCD IntDefaultHandler ; GPIO Port Q1
+ DCD IntDefaultHandler ; GPIO Port Q2
+ DCD IntDefaultHandler ; GPIO Port Q3
+ DCD IntDefaultHandler ; GPIO Port Q4
+ DCD IntDefaultHandler ; GPIO Port Q5
+ DCD IntDefaultHandler ; GPIO Port Q6
+ DCD IntDefaultHandler ; GPIO Port Q7
+ DCD IntDefaultHandler ; GPIO Port R
+ DCD IntDefaultHandler ; GPIO Port S
+ DCD IntDefaultHandler ; PWM 1 Generator 0
+ DCD IntDefaultHandler ; PWM 1 Generator 1
+ DCD IntDefaultHandler ; PWM 1 Generator 2
+ DCD IntDefaultHandler ; PWM 1 Generator 3
+ DCD IntDefaultHandler ; PWM 1 Fault
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor first starts execution
+; following a reset event.
+;
+;******************************************************************************
+ EXPORT Reset_Handler
+Reset_Handler
+ ;
+ ; Enable the floating-point unit. This must be done here to handle the
+ ; case where main() uses floating-point and the function prologue saves
+ ; floating-point registers (which will fault if floating-point is not
+ ; enabled). Any configuration of the floating-point unit using
+ ; DriverLib APIs must be done here prior to the floating-point unit
+ ; being enabled.
+ ;
+ ; Note that this does not use DriverLib since it might not be included
+ ; in this project.
+ ;
+ MOVW R0, #0xED88
+ MOVT R0, #0xE000
+ LDR R1, [R0]
+ ORR R1, #0x00F00000
+ STR R1, [R0]
+
+ ;
+ ; Call the C library enty point that handles startup. This will copy
+ ; the .data section initializers from flash to SRAM and zero fill the
+ ; .bss section.
+ ;
+ IMPORT __main
+ B __main
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives a NMI. This
+; simply enters an infinite loop, preserving the system state for examination
+; by a debugger.
+;
+;******************************************************************************
+NmiSR
+ B NmiSR
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives a fault
+; interrupt. This simply enters an infinite loop, preserving the system state
+; for examination by a debugger.
+;
+;******************************************************************************
+FaultISR
+ B FaultISR
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives an unexpected
+; interrupt. This simply enters an infinite loop, preserving the system state
+; for examination by a debugger.
+;
+;******************************************************************************
+IntDefaultHandler
+ B IntDefaultHandler
+
+;******************************************************************************
+;
+; Make sure the end of this section is aligned.
+;
+;******************************************************************************
+ ALIGN
+
+;******************************************************************************
+;
+; Some code in the normal code section for initializing the heap and stack.
+;
+;******************************************************************************
+ AREA |.text|, CODE, READONLY
+
+;******************************************************************************
+;
+; The function expected of the C library startup code for defining the stack
+; and heap memory locations. For the C library version of the startup code,
+; provide this function so that the C library initialization code can find out
+; the location of the stack and heap.
+;
+;******************************************************************************
+ IF :DEF: __MICROLIB
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+ ELSE
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+__user_initial_stackheap
+ LDR R0, =HeapMem
+ LDR R1, =(StackMem + Stack)
+ LDR R2, =(HeapMem + Heap)
+ LDR R3, =StackMem
+ BX LR
+ ENDIF
+
+;******************************************************************************
+;
+; Make sure the end of this section is aligned.
+;
+;******************************************************************************
+ ALIGN
+
+;******************************************************************************
+;
+; Tell the assembler that we're done.
+;
+;******************************************************************************
+ END
diff --git a/boards/ek-tm4c123gxl/mpu_fault/Makefile b/boards/ek-tm4c123gxl/mpu_fault/Makefile new file mode 100644 index 0000000..bf2ea94 --- /dev/null +++ b/boards/ek-tm4c123gxl/mpu_fault/Makefile @@ -0,0 +1,86 @@ +#******************************************************************************
+#
+# Makefile - Rules for building the MPU example.
+#
+# Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+# Software License Agreement
+#
+# Texas Instruments (TI) is supplying this software for use solely and
+# exclusively on TI's microcontroller products. The software is owned by
+# TI and/or its suppliers, and is protected under applicable copyright
+# laws. You may not combine this software with "viral" open-source
+# software in order to form a larger program.
+#
+# THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+# NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+# NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+# CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+# DAMAGES, FOR ANY REASON WHATSOEVER.
+#
+# This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+#
+#******************************************************************************
+
+#
+# Defines the part type that this project uses.
+#
+PART=TM4C123GH6PM
+
+#
+# The base directory for TivaWare.
+#
+ROOT=../../../..
+
+#
+# Include the common make definitions.
+#
+include ${ROOT}/makedefs
+
+#
+# Where to find source files that do not live in this directory.
+#
+VPATH=../../../../utils
+
+#
+# Where to find header files that do not live in the source directory.
+#
+IPATH=../../../..
+IPATH+=../../../..
+
+#
+# The default rule, which causes the MPU example to be built.
+#
+all: ${COMPILER}
+all: ${COMPILER}/mpu_fault.axf
+
+#
+# The rule to clean out all the build products.
+#
+clean:
+ @rm -rf ${COMPILER} ${wildcard *~}
+
+#
+# The rule to create the target directory.
+#
+${COMPILER}:
+ @mkdir -p ${COMPILER}
+
+#
+# Rules for building the MPU example.
+#
+${COMPILER}/mpu_fault.axf: ${COMPILER}/mpu_fault.o
+${COMPILER}/mpu_fault.axf: ${COMPILER}/startup_${COMPILER}.o
+${COMPILER}/mpu_fault.axf: ${COMPILER}/uartstdio.o
+${COMPILER}/mpu_fault.axf: ${ROOT}/driverlib/${COMPILER}/libdriver.a
+${COMPILER}/mpu_fault.axf: mpu_fault.ld
+SCATTERgcc_mpu_fault=mpu_fault.ld
+ENTRY_mpu_fault=ResetISR
+CFLAGSgcc=-DTARGET_IS_TM4C123_RB1
+
+#
+# Include the automatically generated dependency files.
+#
+ifneq (${MAKECMDGOALS},clean)
+-include ${wildcard ${COMPILER}/*.d} __dummy__
+endif
diff --git a/boards/ek-tm4c123gxl/mpu_fault/ccs/.ccsimportspec b/boards/ek-tm4c123gxl/mpu_fault/ccs/.ccsimportspec new file mode 100644 index 0000000..2bef69c --- /dev/null +++ b/boards/ek-tm4c123gxl/mpu_fault/ccs/.ccsimportspec @@ -0,0 +1,8 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<importSpec>
+ <source root="..">
+ <file name="mpu_fault.c"/>
+ <file regex=".*_ccs\.cmd"/>
+ <file name="startup_ccs.c"/>
+ </source>
+</importSpec>
diff --git a/boards/ek-tm4c123gxl/mpu_fault/ccs/.ccsproject b/boards/ek-tm4c123gxl/mpu_fault/ccs/.ccsproject new file mode 100644 index 0000000..75fb50e --- /dev/null +++ b/boards/ek-tm4c123gxl/mpu_fault/ccs/.ccsproject @@ -0,0 +1,10 @@ +<?xml version="1.0" encoding="UTF-8" ?>
+<?ccsproject version="1.0"?>
+<projectOptions>
+ <deviceVariant value="Cortex M.TM4C123GH6PM"/>
+ <deviceFamily value="TMS470"/>
+ <deviceEndianness value="little"/>
+ <codegenToolVersion value="5.0.4"/>
+ <isElfFormat value="true"/>
+ <rts value="libc.a"/>
+</projectOptions>
diff --git a/boards/ek-tm4c123gxl/mpu_fault/ccs/.cproject b/boards/ek-tm4c123gxl/mpu_fault/ccs/.cproject new file mode 100644 index 0000000..09fa8de --- /dev/null +++ b/boards/ek-tm4c123gxl/mpu_fault/ccs/.cproject @@ -0,0 +1,187 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+ <storageModule configRelations="2" moduleId="org.eclipse.cdt.core.settings">
+ <cconfiguration id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.732904511">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.732904511" moduleId="org.eclipse.cdt.core.settings" name="Debug">
+ <macros>
+ <stringMacro name="SW_ROOT" type="VALUE_PATH_DIR" value="${PROJECT_ROOT}/../../../../.."/>
+ </macros>
+ <externalSettings/>
+ <extensions>
+ <extension id="com.ti.ccstudio.binaryparser.CoffParser" point="org.eclipse.cdt.core.BinaryParser"/>
+ <extension id="com.ti.ccstudio.errorparser.CoffErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.LinkErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.AsmErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactExtension="out" artifactName="${ProjName}" buildProperties="" cleanCommand="${CG_CLEAN_CMD}" description="" id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.732904511" name="Debug" parent="com.ti.ccstudio.buildDefinitions.TMS470.Debug" postbuildStep=""${CCE_INSTALL_ROOT}/utils/tiobj2bin/tiobj2bin" "${BuildArtifactFileName}" "${BuildArtifactFileBaseName}.bin" "${CG_TOOL_ROOT}/bin/armofd" "${CG_TOOL_ROOT}/bin/armhex" "${CCE_INSTALL_ROOT}/utils/tiobj2bin/mkhex4bin"">
+ <folderInfo id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.732904511." name="/" resourcePath="">
+ <toolChain id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.DebugToolchain.1485556345" name="TI Build Tools" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.DebugToolchain" targetTool="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug.918972185">
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS.523150381" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS" valueType="stringList">
+ <listOptionValue builtIn="false" value="DEVICE_CONFIGURATION_ID=Cortex M.TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="DEVICE_ENDIANNESS=little"/>
+ <listOptionValue builtIn="false" value="OUTPUT_FORMAT=ELF"/>
+ <listOptionValue builtIn="false" value="CCS_MBS_VERSION=5.1.0.01"/>
+ <listOptionValue builtIn="false" value="RUNTIME_SUPPORT_LIBRARY=libc.a"/>
+ <listOptionValue builtIn="false" value="OUTPUT_TYPE=executable"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION.332885560" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION" value="5.0.4" valueType="string"/>
+ <targetPlatform id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformDebug.1370970709" name="Platform" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformDebug"/>
+ <builder buildPath="${BuildDirectory}" id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderDebug.561006354" name="GNU Make.Debug" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderDebug"/>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerDebug.585066320" name="ARM Compiler" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerDebug">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.448063617" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.7M4" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.57622729" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.785053728" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.eabi" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.705399755" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.FPv4SPD16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL.725216024" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL.SYMDEBUG__DWARF" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING.511360085" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING" valueType="stringList">
+ <listOptionValue builtIn="false" value="225"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER.413631440" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.1214606136" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH.1528613343" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH" valueType="includePath">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN.1398860231" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.2001321322" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.on" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL.619666019" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL.2" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC.1943015874" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL.1919159892" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE.8726659" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE" valueType="definedSymbols">
+ <listOptionValue builtIn="false" value="ccs="ccs""/>
+ <listOptionValue builtIn="false" value="PART_TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="TARGET_IS_TM4C123_RB1"/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS.2098697788" name="C Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS.1674601041" name="C++ Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS.1770847692" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS.264161558" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS"/>
+ </tool>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug.918972185" name="ARM Linker" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE.817693549" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE" value=""mpu_fault_ccs.map"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE.989408451" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE" value="256" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE.168622407" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE" value="0" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE.316682634" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE" value=""${ProjName}.out"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO.1035323818" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO" value=""${ProjName}_linkInfo.xml"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER.1320225926" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.1018067852" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH.820342895" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH" valueType="libPaths">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/lib""/>
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY.1301963864" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY" valueType="libs">
+ <listOptionValue builtIn="false" value=""libc.a""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/driverlib/ccs/Debug/driverlib.lib""/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS.829785239" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS.755491426" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS.2061646790" name="Generated Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS"/>
+ </tool>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ <cconfiguration id="com.ti.ccstudio.buildDefinitions.TMS470.Release.1093767553">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.ti.ccstudio.buildDefinitions.TMS470.Release.1093767553" moduleId="org.eclipse.cdt.core.settings" name="Release">
+ <macros>
+ <stringMacro name="SW_ROOT" type="VALUE_PATH_DIR" value="${PROJECT_ROOT}/../../../../.."/>
+ </macros>
+ <externalSettings/>
+ <extensions>
+ <extension id="com.ti.ccstudio.binaryparser.CoffParser" point="org.eclipse.cdt.core.BinaryParser"/>
+ <extension id="com.ti.ccstudio.errorparser.CoffErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.LinkErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.AsmErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactExtension="out" artifactName="${ProjName}" buildProperties="" cleanCommand="${CG_CLEAN_CMD}" description="" id="com.ti.ccstudio.buildDefinitions.TMS470.Release.1093767553" name="Release" parent="com.ti.ccstudio.buildDefinitions.TMS470.Release" postbuildStep=""${CCE_INSTALL_ROOT}/utils/tiobj2bin/tiobj2bin" "${BuildArtifactFileName}" "${BuildArtifactFileBaseName}.bin" "${CG_TOOL_ROOT}/bin/armofd" "${CG_TOOL_ROOT}/bin/armhex" "${CCE_INSTALL_ROOT}/utils/tiobj2bin/mkhex4bin"">
+ <folderInfo id="com.ti.ccstudio.buildDefinitions.TMS470.Release.1093767553." name="/" resourcePath="">
+ <toolChain id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.ReleaseToolchain.1370529692" name="TI Build Tools" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.ReleaseToolchain" targetTool="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease.632002240">
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS.1064096759" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS" valueType="stringList">
+ <listOptionValue builtIn="false" value="DEVICE_CONFIGURATION_ID=Cortex M.TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="DEVICE_ENDIANNESS=little"/>
+ <listOptionValue builtIn="false" value="OUTPUT_FORMAT=ELF"/>
+ <listOptionValue builtIn="false" value="CCS_MBS_VERSION=5.1.0.01"/>
+ <listOptionValue builtIn="false" value="RUNTIME_SUPPORT_LIBRARY=libc.a"/>
+ <listOptionValue builtIn="false" value="OUTPUT_TYPE=executable"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION.1068234382" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION" value="5.0.4" valueType="string"/>
+ <targetPlatform id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformRelease.1390785571" name="Platform" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformRelease"/>
+ <builder buildPath="${BuildDirectory}" id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderRelease.1588871144" name="GNU Make.Release" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderRelease"/>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerRelease.376251932" name="ARM Compiler" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerRelease">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.171568723" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.7M4" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.640317674" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.667286818" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.eabi" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.2046670608" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.FPv4SPD16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING.1759397799" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING" valueType="stringList">
+ <listOptionValue builtIn="false" value="225"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER.2083639168" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.2053056659" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH.285509304" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH" valueType="includePath">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN.1839647109" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.1998609726" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.on" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC.598820614" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL.640686244" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE.1287985296" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE" valueType="definedSymbols">
+ <listOptionValue builtIn="false" value="ccs="ccs""/>
+ <listOptionValue builtIn="false" value="PART_TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="TARGET_IS_TM4C123_RB1"/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS.682636215" name="C Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS.128663562" name="C++ Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS.1041622377" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS.79822450" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS"/>
+ </tool>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease.632002240" name="ARM Linker" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE.1425009899" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE" value=""mpu_fault_ccs.map"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE.994779812" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE" value="256" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE.399003397" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE" value="0" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE.1024170813" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE" value=""${ProjName}.out"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO.780258093" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO" value=""${ProjName}_linkInfo.xml"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER.850273057" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.553561502" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH.2084417115" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH" valueType="libPaths">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/lib""/>
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY.1847556213" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY" valueType="libs">
+ <listOptionValue builtIn="false" value=""libc.a""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/driverlib/ccs/Debug/driverlib.lib""/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS.799225742" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS.313283597" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS.1348648667" name="Generated Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS"/>
+ </tool>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <project id="mpu_fault.com.ti.ccstudio.buildDefinitions.TMS470.ProjectType.438416633" name="ARM" projectType="com.ti.ccstudio.buildDefinitions.TMS470.ProjectType"/>
+ </storageModule>
+ <storageModule moduleId="scannerConfiguration"/>
+ <storageModule moduleId="org.eclipse.cdt.core.language.mapping">
+ <project-mappings>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.asmSource" language="com.ti.ccstudio.core.TIASMLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cHeader" language="com.ti.ccstudio.core.TIGCCLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cSource" language="com.ti.ccstudio.core.TIGCCLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cxxHeader" language="com.ti.ccstudio.core.TIGPPLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cxxSource" language="com.ti.ccstudio.core.TIGPPLanguage"/>
+ </project-mappings>
+ </storageModule>
+</cproject>
diff --git a/boards/ek-tm4c123gxl/mpu_fault/ccs/.project b/boards/ek-tm4c123gxl/mpu_fault/ccs/.project new file mode 100644 index 0000000..8b43d01 --- /dev/null +++ b/boards/ek-tm4c123gxl/mpu_fault/ccs/.project @@ -0,0 +1,55 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+ <name>mpu_fault</name>
+ <comment></comment>
+ <projects>
+ </projects>
+ <buildSpec>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+ <triggers>full,incremental,</triggers>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ </buildSpec>
+ <natures>
+ <nature>com.ti.ccstudio.core.ccsNature</nature>
+ <nature>org.eclipse.cdt.core.cnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+ <nature>org.eclipse.cdt.core.ccnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+ </natures>
+ <linkedResources>
+ <link>
+ <name>mpu_fault.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/mpu_fault/mpu_fault.c</locationURI>
+ </link>
+ <link>
+ <name>mpu_fault_ccs.cmd</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/mpu_fault/mpu_fault_ccs.cmd</locationURI>
+ </link>
+ <link>
+ <name>startup_ccs.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/mpu_fault/startup_ccs.c</locationURI>
+ </link>
+ <link>
+ <name>utils/uartstdio.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/utils/uartstdio.c</locationURI>
+ </link>
+ </linkedResources>
+ <variableList>
+ <variable>
+ <name>SW_ROOT</name>
+ <value>$%7BPARENT-5-PROJECT_LOC%7D</value>
+ </variable>
+ </variableList>
+</projectDescription>
diff --git a/boards/ek-tm4c123gxl/mpu_fault/ccs/.settings/org.eclipse.cdt.codan.core.prefs b/boards/ek-tm4c123gxl/mpu_fault/ccs/.settings/org.eclipse.cdt.codan.core.prefs new file mode 100644 index 0000000..98b6350 --- /dev/null +++ b/boards/ek-tm4c123gxl/mpu_fault/ccs/.settings/org.eclipse.cdt.codan.core.prefs @@ -0,0 +1,3 @@ +eclipse.preferences.version=1
+inEditor=false
+onBuild=false
diff --git a/boards/ek-tm4c123gxl/mpu_fault/ccs/Debug/mpu_fault.bin b/boards/ek-tm4c123gxl/mpu_fault/ccs/Debug/mpu_fault.bin Binary files differnew file mode 100644 index 0000000..dbda8bc --- /dev/null +++ b/boards/ek-tm4c123gxl/mpu_fault/ccs/Debug/mpu_fault.bin diff --git a/boards/ek-tm4c123gxl/mpu_fault/ccs/Debug/mpu_fault.out b/boards/ek-tm4c123gxl/mpu_fault/ccs/Debug/mpu_fault.out Binary files differnew file mode 100644 index 0000000..0c8703b --- /dev/null +++ b/boards/ek-tm4c123gxl/mpu_fault/ccs/Debug/mpu_fault.out diff --git a/boards/ek-tm4c123gxl/mpu_fault/ccs/macros.ini_initial b/boards/ek-tm4c123gxl/mpu_fault/ccs/macros.ini_initial new file mode 100644 index 0000000..31214b5 --- /dev/null +++ b/boards/ek-tm4c123gxl/mpu_fault/ccs/macros.ini_initial @@ -0,0 +1 @@ +SW_ROOT = ../../../../..
diff --git a/boards/ek-tm4c123gxl/mpu_fault/ccs/target_config.ccxml b/boards/ek-tm4c123gxl/mpu_fault/ccs/target_config.ccxml new file mode 100644 index 0000000..be4342a --- /dev/null +++ b/boards/ek-tm4c123gxl/mpu_fault/ccs/target_config.ccxml @@ -0,0 +1,13 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<configurations XML_version="1.2" id="configurations_0">
+ <configuration XML_version="1.2" id="Stellaris In-Circuit Debug Interface_0">
+ <instance XML_version="1.2" desc="Stellaris In-Circuit Debug Interface_0" href="connections/Stellaris_ICDI_Connection.xml" id="Stellaris In-Circuit Debug Interface_0" xml="Stellaris_ICDI_Connection.xml" xmlpath="connections"/>
+ <connection XML_version="1.2" id="Stellaris In-Circuit Debug Interface_0">
+ <instance XML_version="1.2" href="drivers/stellaris_cs_dap.xml" id="drivers" xml="stellaris_cs_dap.xml" xmlpath="drivers"/>
+ <instance XML_version="1.2" href="drivers/stellaris_cortex_m4.xml" id="drivers" xml="stellaris_cortex_m4.xml" xmlpath="drivers"/>
+ <platform XML_version="1.2" id="platform_0">
+ <instance XML_version="1.2" desc="Stellaris TM4C123GH6PM_0" href="devices/tm4c123gh6pm.xml" id="Stellaris TM4C123GH6PM_0" xml="tm4c123gh6pm.xml" xmlpath="devices"/>
+ </platform>
+ </connection>
+ </configuration>
+</configurations>
diff --git a/boards/ek-tm4c123gxl/mpu_fault/ewarm/Exe/mpu_fault.bin b/boards/ek-tm4c123gxl/mpu_fault/ewarm/Exe/mpu_fault.bin Binary files differnew file mode 100644 index 0000000..a566aca --- /dev/null +++ b/boards/ek-tm4c123gxl/mpu_fault/ewarm/Exe/mpu_fault.bin diff --git a/boards/ek-tm4c123gxl/mpu_fault/ewarm/Exe/mpu_fault.out b/boards/ek-tm4c123gxl/mpu_fault/ewarm/Exe/mpu_fault.out Binary files differnew file mode 100644 index 0000000..ac129b7 --- /dev/null +++ b/boards/ek-tm4c123gxl/mpu_fault/ewarm/Exe/mpu_fault.out diff --git a/boards/ek-tm4c123gxl/mpu_fault/gcc/mpu_fault.axf b/boards/ek-tm4c123gxl/mpu_fault/gcc/mpu_fault.axf Binary files differnew file mode 100644 index 0000000..2dd1454 --- /dev/null +++ b/boards/ek-tm4c123gxl/mpu_fault/gcc/mpu_fault.axf diff --git a/boards/ek-tm4c123gxl/mpu_fault/gcc/mpu_fault.bin b/boards/ek-tm4c123gxl/mpu_fault/gcc/mpu_fault.bin Binary files differnew file mode 100644 index 0000000..8a3ec62 --- /dev/null +++ b/boards/ek-tm4c123gxl/mpu_fault/gcc/mpu_fault.bin diff --git a/boards/ek-tm4c123gxl/mpu_fault/mpu_fault.c b/boards/ek-tm4c123gxl/mpu_fault/mpu_fault.c new file mode 100644 index 0000000..f63938b --- /dev/null +++ b/boards/ek-tm4c123gxl/mpu_fault/mpu_fault.c @@ -0,0 +1,419 @@ +//*****************************************************************************
+//
+// mpu_fault.c - MPU example.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdbool.h>
+#include <stdint.h>
+#include "inc/hw_ints.h"
+#include "inc/hw_memmap.h"
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+#include "driverlib/debug.h"
+#include "driverlib/fpu.h"
+#include "driverlib/gpio.h"
+#include "driverlib/interrupt.h"
+#include "driverlib/mpu.h"
+#include "driverlib/pin_map.h"
+#include "driverlib/rom.h"
+#include "driverlib/sysctl.h"
+#include "driverlib/uart.h"
+#include "utils/uartstdio.h"
+
+//*****************************************************************************
+//
+//! \addtogroup example_list
+//! <h1>MPU (mpu_fault)</h1>
+//!
+//! This example application demonstrates the use of the MPU to protect a
+//! region of memory from access, and to generate a memory management fault
+//! when there is an access violation.
+//!
+//! UART0, connected to the virtual serial port and running at 115,200, 8-N-1,
+//! is used to display messages from this application.
+//
+//*****************************************************************************
+
+
+//*****************************************************************************
+//
+// Variables to hold the state of the fault status when the fault occurs and
+// the faulting address.
+//
+//*****************************************************************************
+static volatile uint32_t g_ui32MMAR;
+static volatile uint32_t g_ui32FaultStatus;
+
+//*****************************************************************************
+//
+// A counter to track the number of times the fault handler has been entered.
+//
+//*****************************************************************************
+static volatile uint32_t g_ui32MPUFaultCount;
+
+//*****************************************************************************
+//
+// A location for storing data read from various addresses. Volatile forces
+// the compiler to use it and not optimize the access away.
+//
+//*****************************************************************************
+static volatile uint32_t g_ui32Value;
+
+//*****************************************************************************
+//
+// The error routine that is called if the driver library encounters an error.
+//
+//*****************************************************************************
+#ifdef DEBUG
+void
+__error__(char *pcFilename, uint32_t ui32Line)
+{
+}
+#endif
+
+//*****************************************************************************
+//
+// The exception handler for memory management faults, which are caused by MPU
+// access violations. This handler will verify the cause of the fault and
+// clear the NVIC fault status register.
+//
+//*****************************************************************************
+void
+MPUFaultHandler(void)
+{
+ //
+ // Preserve the value of the MMAR (the address causing the fault).
+ // Preserve the fault status register value, then clear it.
+ //
+ g_ui32MMAR = HWREG(NVIC_MM_ADDR);
+ g_ui32FaultStatus = HWREG(NVIC_FAULT_STAT);
+ HWREG(NVIC_FAULT_STAT) = g_ui32FaultStatus;
+
+ //
+ // Increment a counter to indicate the fault occurred.
+ //
+ g_ui32MPUFaultCount++;
+
+ //
+ // Disable the MPU so that this handler can return and cause no more
+ // faults. The actual instruction that faulted will be re-executed.
+ //
+ ROM_MPUDisable();
+}
+
+//*****************************************************************************
+//
+// Configure the UART and its pins. This must be called before UARTprintf().
+//
+//*****************************************************************************
+void
+ConfigureUART(void)
+{
+ //
+ // Enable the GPIO Peripheral used by the UART.
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOA);
+
+ //
+ // Enable UART0
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_UART0);
+
+ //
+ // Configure GPIO Pins for UART mode.
+ //
+ ROM_GPIOPinConfigure(GPIO_PA0_U0RX);
+ ROM_GPIOPinConfigure(GPIO_PA1_U0TX);
+ ROM_GPIOPinTypeUART(GPIO_PORTA_BASE, GPIO_PIN_0 | GPIO_PIN_1);
+
+ //
+ // Use the internal 16MHz oscillator as the UART clock source.
+ //
+ UARTClockSourceSet(UART0_BASE, UART_CLOCK_PIOSC);
+
+ //
+ // Initialize the UART for console I/O.
+ //
+ UARTStdioConfig(0, 115200, 16000000);
+}
+
+//*****************************************************************************
+//
+// This example demonstrates how to configure MPU regions for different levels
+// of memory protection. The following memory map is set up:
+//
+// 0000.0000 - 0000.1C00 - rgn 0: executable read-only, flash
+// 0000.1C00 - 0000.2000 - rgn 0: no access, flash (disabled sub-region 7)
+// 2000.0000 - 2000.4000 - rgn 1: read-write, RAM
+// 2000.4000 - 2000.6000 - rgn 2: read-only, RAM (disabled sub-rgn 4 of rgn 1)
+// 2000.6000 - 2000.7FFF - rgn 1: read-write, RAM
+// 4000.0000 - 4001.0000 - rgn 3: read-write, peripherals
+// 4001.0000 - 4002.0000 - rgn 3: no access (disabled sub-region 1)
+// 4002.0000 - 4006.0000 - rgn 3: read-write, peripherals
+// 4006.0000 - 4008.0000 - rgn 3: no access (disabled sub-region 6, 7)
+// E000.E000 - E000.F000 - rgn 4: read-write, NVIC
+// 0100.0000 - 0100.FFFF - rgn 5: executable read-only, ROM
+//
+// The example code will attempt to perform the following operations and check
+// the faulting behavior:
+//
+// - write to flash (should fault)
+// - read from the disabled area of flash (should fault)
+// - read from the read-only area of RAM (should not fault)
+// - write to the read-only section of RAM (should fault)
+//
+//*****************************************************************************
+int
+main(void)
+{
+ unsigned int bFail = 0;
+
+ //
+ // Enable lazy stacking for interrupt handlers. This allows floating-point
+ // instructions to be used within interrupt handlers, but at the expense of
+ // extra stack usage.
+ //
+ ROM_FPULazyStackingEnable();
+
+ //
+ // Set the clocking to run directly from the crystal.
+ //
+ ROM_SysCtlClockSet(SYSCTL_SYSDIV_1 | SYSCTL_USE_OSC | SYSCTL_OSC_MAIN |
+ SYSCTL_XTAL_16MHZ);
+
+ //
+ // Initialize the UART and write status.
+ //
+ ConfigureUART();
+
+ UARTprintf("\033[2JMPU example\n");
+
+ //
+ // Configure an executable, read-only MPU region for flash. It is a 16 KB
+ // region with the last 2 KB disabled to result in a 14 KB executable
+ // region. This region is needed so that the program can execute from
+ // flash.
+ //
+ ROM_MPURegionSet(0, FLASH_BASE,
+ MPU_RGN_SIZE_16K | MPU_RGN_PERM_EXEC |
+ MPU_RGN_PERM_PRV_RO_USR_RO | MPU_SUB_RGN_DISABLE_7 |
+ MPU_RGN_ENABLE);
+
+ //
+ // Configure a read-write MPU region for RAM. It is a 32 KB region. There
+ // is a 4 KB sub-region in the middle that is disabled in order to open up
+ // a hole in which different permissions can be applied.
+ //
+ ROM_MPURegionSet(1, SRAM_BASE,
+ MPU_RGN_SIZE_32K | MPU_RGN_PERM_NOEXEC |
+ MPU_RGN_PERM_PRV_RW_USR_RW | MPU_SUB_RGN_DISABLE_4 |
+ MPU_RGN_ENABLE);
+
+ //
+ // Configure a read-only MPU region for the 4 KB of RAM that is disabled in
+ // the previous region. This region is used for demonstrating read-only
+ // permissions.
+ //
+ ROM_MPURegionSet(2, SRAM_BASE + 0x4000,
+ MPU_RGN_SIZE_2K | MPU_RGN_PERM_NOEXEC |
+ MPU_RGN_PERM_PRV_RO_USR_RO | MPU_RGN_ENABLE);
+
+ //
+ // Configure a read-write MPU region for peripherals. The region is 512 KB
+ // total size, with several sub-regions disabled to prevent access to areas
+ // where there are no peripherals. This region is needed because the
+ // program needs access to some peripherals.
+ //
+ ROM_MPURegionSet(3, 0x40000000,
+ MPU_RGN_SIZE_512K | MPU_RGN_PERM_NOEXEC |
+ MPU_RGN_PERM_PRV_RW_USR_RW | MPU_SUB_RGN_DISABLE_1 |
+ MPU_SUB_RGN_DISABLE_6 | MPU_SUB_RGN_DISABLE_7 |
+ MPU_RGN_ENABLE);
+
+ //
+ // Configure a read-write MPU region for access to the NVIC. The region is
+ // 4 KB in size. This region is needed because NVIC registers are needed
+ // in order to control the MPU.
+ //
+ ROM_MPURegionSet(4, NVIC_BASE,
+ MPU_RGN_SIZE_4K | MPU_RGN_PERM_NOEXEC |
+ MPU_RGN_PERM_PRV_RW_USR_RW | MPU_RGN_ENABLE);
+
+ //
+ // Configure an executable, read-only MPU region for ROM. It is a 64 KB
+ // region. This region is needed so that ROM library calls work.
+ //
+ ROM_MPURegionSet(5, (uint32_t)ROM_APITABLE & 0xFFFF0000,
+ MPU_RGN_SIZE_64K | MPU_RGN_PERM_EXEC |
+ MPU_RGN_PERM_PRV_RO_USR_RO | MPU_RGN_ENABLE);
+
+ //
+ // Need to clear the NVIC fault status register to make sure there is no
+ // status hanging around from a previous program.
+ //
+ g_ui32FaultStatus = HWREG(NVIC_FAULT_STAT);
+ HWREG(NVIC_FAULT_STAT) = g_ui32FaultStatus;
+
+ //
+ // Enable the MPU fault.
+ //
+ ROM_IntEnable(FAULT_MPU);
+
+ //
+ // Enable the MPU. This will begin to enforce the memory protection
+ // regions. The MPU is configured so that when in the hard fault or NMI
+ // exceptions, a default map will be used. Neither of these should occur
+ // in this example program.
+ //
+ ROM_MPUEnable(MPU_CONFIG_HARDFLT_NMI);
+
+ //
+ // Attempt to write to the flash. This should cause a protection fault due
+ // to the fact that this region is read-only.
+ //
+ UARTprintf("Flash write... ");
+ g_ui32MPUFaultCount = 0;
+ HWREG(0x100) = 0x12345678;
+
+ //
+ // Verify that the fault occurred, at the expected address.
+ //
+ if((g_ui32MPUFaultCount == 1) && (g_ui32FaultStatus == 0x82) &&
+ (g_ui32MMAR == 0x100))
+ {
+ UARTprintf(" OK\n");
+ }
+ else
+ {
+ bFail = 1;
+ UARTprintf("NOK\n");
+ }
+
+ //
+ // The MPU was disabled when the previous fault occurred, so it needs to be
+ // re-enabled.
+ //
+ ROM_MPUEnable(MPU_CONFIG_HARDFLT_NMI);
+
+ //
+ // Attempt to read from the disabled section of flash, the upper 2 KB of
+ // the 16 KB region.
+ //
+ UARTprintf("Flash read... ");
+ g_ui32MPUFaultCount = 0;
+ g_ui32Value = HWREG(0x3820);
+
+ //
+ // Verify that the fault occurred, at the expected address.
+ //
+ if((g_ui32MPUFaultCount == 1) && (g_ui32FaultStatus == 0x82) &&
+ (g_ui32MMAR == 0x3820))
+ {
+ UARTprintf(" OK\n");
+ }
+ else
+ {
+ bFail = 1;
+ UARTprintf("NOK\n");
+ }
+
+ //
+ // The MPU was disabled when the previous fault occurred, so it needs to be
+ // re-enabled.
+ //
+ ROM_MPUEnable(MPU_CONFIG_HARDFLT_NMI);
+
+ //
+ // Attempt to read from the read-only area of RAM, the middle 4 KB of the
+ // 32 KB region.
+ //
+ UARTprintf("RAM read... ");
+ g_ui32MPUFaultCount = 0;
+ g_ui32Value = HWREG(0x20004440);
+
+ //
+ // Verify that the RAM read did not cause a fault.
+ //
+ if(g_ui32MPUFaultCount == 0)
+ {
+ UARTprintf(" OK\n");
+ }
+ else
+ {
+ bFail = 1;
+ UARTprintf("NOK\n");
+ }
+
+ //
+ // The MPU should not have been disabled since the last access was not
+ // supposed to cause a fault. But if it did cause a fault, then the MPU
+ // will be disabled, so re-enable it here anyway, just in case.
+ //
+ ROM_MPUEnable(MPU_CONFIG_HARDFLT_NMI);
+
+ //
+ // Attempt to write to the read-only area of RAM, the middle 4 KB of the
+ // 32 KB region.
+ //
+ UARTprintf("RAM write... ");
+ g_ui32MPUFaultCount = 0;
+ HWREG(0x20004460) = 0xabcdef00;
+
+ //
+ // Verify that the RAM write caused a fault.
+ //
+ if((g_ui32MPUFaultCount == 1) && (g_ui32FaultStatus == 0x82) &&
+ (g_ui32MMAR == 0x20004460))
+ {
+ UARTprintf(" OK\n");
+ }
+ else
+ {
+ bFail = 1;
+ UARTprintf("NOK\n");
+ }
+
+ //
+ // Display the results of the example program.
+ //
+ if(bFail)
+ {
+ UARTprintf("Failure!\n");
+ }
+ else
+ {
+ UARTprintf("Success!\n");
+ }
+
+ //
+ // Disable the MPU, so there are no lingering side effects if another
+ // program is run.
+ //
+ ROM_MPUDisable();
+
+ //
+ // Loop forever.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/mpu_fault/mpu_fault.ewd b/boards/ek-tm4c123gxl/mpu_fault/mpu_fault.ewd new file mode 100644 index 0000000..7a32408 --- /dev/null +++ b/boards/ek-tm4c123gxl/mpu_fault/mpu_fault.ewd @@ -0,0 +1,614 @@ +<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+ <fileVersion>1</fileVersion>
+ <configuration>
+ <name>Debug</name>
+ <toolchain>
+ <name>ARM</name>
+ </toolchain>
+ <debug>1</debug>
+ <settings>
+ <name>C-SPY</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>15</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CInput</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CEndian</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCVariant</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>MemOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MemFile</name>
+ <state>$TOOLKIT_DIR$\CONFIG\debugger\TexasInstruments\tm4c123gh6pm</state>
+ </option>
+ <option>
+ <name>RunToEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>RunToName</name>
+ <state>main</state>
+ </option>
+ <option>
+ <name>CExtraOptionsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCDDFArgumentProducer</name>
+ <state></state>
+ </option>
+ <option>
+ <name>OCDownloadSuppressDownload</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDownloadVerifyAll</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OCDynDriverList</name>
+ <state>LMIFTDI_ID</state>
+ </option>
+ <option>
+ <name>OCLastSavedByProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OCDownloadAttachToProgram</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FlashLoaders</name>
+ <state>,,,,(default),</state>
+ </option>
+ <option>
+ <name>UseFlashLoader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CLowLevel</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCBE8Slave</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ARMSIM_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCSimDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCSimEnablePSP</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCSimPspOverrideConfig</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCSimPspConfigFile</name>
+ <state></state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ANGEL_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CCAngelHeartbeat</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CAngelCommunication</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CAngelCommBaud</name>
+ <version>0</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>CAngelCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ANGELTCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoAngelLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AngelLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>GDBSERVER_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>TCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>LogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCJTagBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>IARROM_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CRomLogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomLogFileEditB</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CRomCommunication</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomCommBaud</name>
+ <version>0</version>
+ <state>7</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>JLINK_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>9</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>JLinkSpeed</name>
+ <state>32</state>
+ </option>
+ <option>
+ <name>CCJLinkDoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCJLinkHWResetDelay</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>JLinkInitialSpeed</name>
+ <state>32</state>
+ </option>
+ <option>
+ <name>CCDoJlinkMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCScanChainNonARMDevices</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkIRLength</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkCommRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkTCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>CCJLinkSpeedRadioV2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCUSBDevice</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchUndef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchSWI</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchData</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchPrefetch</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchIRQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchFIQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ <option>
+ <name>CCJLinkInterfaceRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCJLinkAttachSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCJLinkResetList</name>
+ <version>0</version>
+ <state>5</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>LMIFTDI_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>LmiftdiSpeed</name>
+ <state>500</state>
+ </option>
+ <option>
+ <name>CCLmiftdiDoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCLmiftdiLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>MACRAIGOR_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>2</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>jtag</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>EmuSpeed</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>TCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>LogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>DoEmuMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>EmuMultiTarget</name>
+ <state>0@ARM7TDMI</state>
+ </option>
+ <option>
+ <name>EmuHWReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CEmuCommBaud</name>
+ <version>0</version>
+ <state>4</state>
+ </option>
+ <option>
+ <name>CEmuCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>jtago</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>UnusedAddr</name>
+ <state>0x00800000</state>
+ </option>
+ <option>
+ <name>CCMacraigorHWResetDelay</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCJTagBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>RDI_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CRDIDriverDll</name>
+ <state>Browse to your RDI driver</state>
+ </option>
+ <option>
+ <name>CRDILogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRDILogFileEdit</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCRDIHWReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchUndef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchSWI</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchData</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchPrefetch</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchIRQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchFIQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDIUseETM</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>THIRDPARTY_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CThirdPartyDriverDll</name>
+ <state>Browse to your third-party driver</state>
+ </option>
+ <option>
+ <name>CThirdPartyLogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CThirdPartyLogFileEditB</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <debuggerPlugins>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\OSE\OseEpsilonPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Profiling\Profiling.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ </debuggerPlugins>
+ </configuration>
+</project>
diff --git a/boards/ek-tm4c123gxl/mpu_fault/mpu_fault.ewp b/boards/ek-tm4c123gxl/mpu_fault/mpu_fault.ewp new file mode 100644 index 0000000..4931769 --- /dev/null +++ b/boards/ek-tm4c123gxl/mpu_fault/mpu_fault.ewp @@ -0,0 +1,789 @@ +<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+ <fileVersion>1</fileVersion>
+ <configuration>
+ <name>Debug</name>
+ <toolchain>
+ <name>ARM</name>
+ </toolchain>
+ <debug>1</debug>
+ <settings>
+ <name>General</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <version>14</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>ExePath</name>
+ <state>ewarm\Exe</state>
+ </option>
+ <option>
+ <name>ObjPath</name>
+ <state>ewarm\Obj</state>
+ </option>
+ <option>
+ <name>ListPath</name>
+ <state>ewarm\List</state>
+ </option>
+ <option>
+ <name>Variant</name>
+ <version>19</version>
+ <state>39</state>
+ </option>
+ <option>
+ <name>GEndianMode</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>Input variant</name>
+ <version>1</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>Input description</name>
+ <state>No specifier n, no float nor long long, no scan set, no assignment suppressing.</state>
+ </option>
+ <option>
+ <name>Output variant</name>
+ <version>0</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>Output description</name>
+ <state>No specifier a, A, no specifier n, no float nor long long, no flags.</state>
+ </option>
+ <option>
+ <name>GOutputBinary</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FPU</name>
+ <version>2</version>
+ <state>5</state>
+ </option>
+ <option>
+ <name>OGCoreOrChip</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelect</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelectSlave</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>RTDescription</name>
+ <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+ </option>
+ <option>
+ <name>RTConfigPath</name>
+ <state>$TOOLKIT_DIR$\INC\DLib_Config_Normal.h</state>
+ </option>
+ <option>
+ <name>OGProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OGLastSavedByProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>GeneralMisraRules</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>GeneralEnableMisra</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GeneralMisraVerbose</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGChipSelectEditMenu</name>
+ <state>TM4C123GH6PM TexasInstruments TM4C123GH6PM</state>
+ </option>
+ <option>
+ <name>GenLowLevelInterface</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GEndianModeBE</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OGBufferedTerminalOutput</name>
+ <state>0</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ICCARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>19</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CCDefines</name>
+ <state>ewarm</state>
+ <state>PART_TM4C123GH6PM</state>
+ <state>TARGET_IS_TM4C123_RB1</state>
+ </option>
+ <option>
+ <name>CCPreprocFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocComments</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMnemonics</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMessages</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssSource</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagSuppress</name>
+ <state>Pa050</state>
+ </option>
+ <option>
+ <name>CCDiagRemark</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCDiagWarning</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCDiagError</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCAllowList</name>
+ <version>1</version>
+ <state>1111111</state>
+ </option>
+ <option>
+ <name>CCDebugInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IEndianMode</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IExtraOptionsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCLangConformance</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCSignedPlainChar</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCRequirePrototypes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagWarnAreErr</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCCompilerRuntimeInfo</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OutputFile</name>
+ <state>$FILE_BNAME$.o</state>
+ </option>
+ <option>
+ <name>CCLangSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCLibConfigHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>PreInclude</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CompilerMisraRules</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>CompilerMisraOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCIncludePath2</name>
+ <state>$PROJ_DIR$\..\..\..\..</state>
+ <state>$PROJ_DIR$\..\..\..\..</state>
+ </option>
+ <option>
+ <name>CCStdIncCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCStdIncludePath</name>
+ <state>$TOOLKIT_DIR$\INC\</state>
+ </option>
+ <option>
+ <name>CCCodeSection</name>
+ <state>.text</state>
+ </option>
+ <option>
+ <name>IInterwork2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IProcessorMode2</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptLevel</name>
+ <state>3</state>
+ </option>
+ <option>
+ <name>CCOptStrategy</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptLevelSlave</name>
+ <state>3</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>AARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>7</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>AObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AEndian</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>ACaseSensitivity</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacroChars</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnEnable</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnWhat</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnOne</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AWarnRange1</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AWarnRange2</name>
+ <state></state>
+ </option>
+ <option>
+ <name>ADebug</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AltRegisterNames</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ADefines</name>
+ <state>ewarm</state>
+ </option>
+ <option>
+ <name>AList</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AListHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AListing</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>Includes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacDefs</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacExps</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacExec</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OnlyAssed</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MultiLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLengthCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLength</name>
+ <state>80</state>
+ </option>
+ <option>
+ <name>TabSpacing</name>
+ <state>8</state>
+ </option>
+ <option>
+ <name>AXRef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDefines</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefInternal</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDual</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AOutputFile</name>
+ <state>$FILE_BNAME$.o</state>
+ </option>
+ <option>
+ <name>AMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ALimitErrorsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ALimitErrorsEdit</name>
+ <state>100</state>
+ </option>
+ <option>
+ <name>AIgnoreStdInclude</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AStdIncludes</name>
+ <state>$TOOLKIT_DIR$\INC\</state>
+ </option>
+ <option>
+ <name>AUserIncludes</name>
+ <state>$PROJ_DIR$\..\..\..\..</state>
+ <state>$PROJ_DIR$\..\..\..\..</state>
+ </option>
+ <option>
+ <name>AExtraOptionsCheckV2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AExtraOptionsV2</name>
+ <state></state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>OBJCOPY</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OOCOutputFormat</name>
+ <version>1</version>
+ <state>2</state>
+ </option>
+ <option>
+ <name>OCOutputOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OOCOutputFile</name>
+ <state>mpu_fault.bin</state>
+ </option>
+ <option>
+ <name>OOCCommandLineProducer</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OOCObjCopyEnable</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>CUSTOM</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <extensions></extensions>
+ <cmdline></cmdline>
+ </data>
+ </settings>
+ <settings>
+ <name>BICOMP</name>
+ <archiveVersion>0</archiveVersion>
+ <data/>
+ </settings>
+ <settings>
+ <name>BUILDACTION</name>
+ <archiveVersion>1</archiveVersion>
+ <data>
+ <prebuild></prebuild>
+ <postbuild></postbuild>
+ </data>
+ </settings>
+ <settings>
+ <name>ILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>5</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>IlinkLibIOConfig</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>XLinkMisraHandler</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkInputFileSlave</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkOutputFile</name>
+ <state>mpu_fault.out</state>
+ </option>
+ <option>
+ <name>IlinkDebugInfoEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkKeepSymbols</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinaryFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinarySymbol</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinarySegment</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinaryAlign</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkDefines</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkConfigDefines</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkMapFile</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkLogFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogInitialization</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogModule</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogSection</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogVeneer</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkIcfOverride</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkIcfFile</name>
+ <state>$PROJ_DIR$\mpu_fault.icf</state>
+ </option>
+ <option>
+ <name>IlinkIcfFileSlave</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkSuppressDiags</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsRem</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsWarn</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsErr</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkWarningsAreErrors</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkUseExtraOptions</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkLowLevelInterfaceSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAutoLibEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAdditionalLibs</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkOverrideProgramEntryLabel</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabelSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabel</name>
+ <state>__iar_program_start</state>
+ </option>
+ <option>
+ <name>IlinkNXPLPCChecksum</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>DoFill</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FillerByte</name>
+ <state>0xFF</state>
+ </option>
+ <option>
+ <name>FillerStart</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>FillerEnd</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>CrcSize</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcAlign</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcAlgo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcPoly</name>
+ <state>0x11021</state>
+ </option>
+ <option>
+ <name>CrcCompl</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcBitOrder</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcInitialValue</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>DoCrc</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkBE8Slave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkBufferedTerminalOutput</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>IARCHIVE</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>IarchiveInputs</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IarchiveOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IarchiveOutput</name>
+ <state>###Unitialized###</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>BILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data/>
+ </settings>
+ </configuration>
+ <group>
+ <name>Libraries</name>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\driverlib\ewarm\Exe\driverlib.a</name>
+ </file>
+ </group>
+ <group>
+ <name>Source</name>
+ <file>
+ <name>$PROJ_DIR$\mpu_fault.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\startup_ewarm.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\utils\uartstdio.c</name>
+ </file>
+ </group>
+</project>
diff --git a/boards/ek-tm4c123gxl/mpu_fault/mpu_fault.icf b/boards/ek-tm4c123gxl/mpu_fault/mpu_fault.icf new file mode 100644 index 0000000..700c34a --- /dev/null +++ b/boards/ek-tm4c123gxl/mpu_fault/mpu_fault.icf @@ -0,0 +1,78 @@ +//*****************************************************************************
+//
+// mpu_fault.icf - Linker configuration file for mpu_fault.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+//
+// Define a memory region that covers the entire 4 GB addressible space of the
+// processor.
+//
+define memory mem with size = 4G;
+
+//
+// Define a region for the on-chip flash.
+//
+define region FLASH = mem:[from 0x00000000 to 0x0003ffff];
+
+//
+// Define a region for the on-chip SRAM.
+//
+define region SRAM = mem:[from 0x20000000 to 0x20007fff];
+
+//
+// Define a block for the heap. The size should be set to something other
+// than zero if things in the C library that require the heap are used.
+//
+define block HEAP with alignment = 8, size = 0x00000000 { };
+
+//
+// Indicate that the read/write values should be initialized by copying from
+// flash.
+//
+initialize by copy { readwrite };
+
+//
+// Indicate that the noinit values should be left alone. This includes the
+// stack, which if initialized will destroy the return address from the
+// initialization code, causing the processor to branch to zero and fault.
+//
+do not initialize { section .noinit };
+
+//
+// Place the interrupt vectors at the start of flash.
+//
+place at start of FLASH { readonly section .intvec };
+
+//
+// Place the remainder of the read-only items into flash.
+//
+place in FLASH { readonly };
+
+//
+// Place the RAM vector table at the start of SRAM.
+//
+place at start of SRAM { section VTABLE };
+
+//
+// Place all read/write items into SRAM.
+//
+place in SRAM { readwrite, block HEAP };
diff --git a/boards/ek-tm4c123gxl/mpu_fault/mpu_fault.ld b/boards/ek-tm4c123gxl/mpu_fault/mpu_fault.ld new file mode 100644 index 0000000..d035d54 --- /dev/null +++ b/boards/ek-tm4c123gxl/mpu_fault/mpu_fault.ld @@ -0,0 +1,57 @@ +/******************************************************************************
+ *
+ * mpu_fault.ld - Linker configuration file for mpu_fault.
+ *
+ * Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+ * Software License Agreement
+ *
+ * Texas Instruments (TI) is supplying this software for use solely and
+ * exclusively on TI's microcontroller products. The software is owned by
+ * TI and/or its suppliers, and is protected under applicable copyright
+ * laws. You may not combine this software with "viral" open-source
+ * software in order to form a larger program.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+ * NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+ * NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+ * CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+ * DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ * This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+ *
+ *****************************************************************************/
+
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x00040000
+ SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000
+}
+
+SECTIONS
+{
+ .text :
+ {
+ _text = .;
+ KEEP(*(.isr_vector))
+ *(.text*)
+ *(.rodata*)
+ _etext = .;
+ } > FLASH
+
+ .data : AT(ADDR(.text) + SIZEOF(.text))
+ {
+ _data = .;
+ *(vtable)
+ *(.data*)
+ _edata = .;
+ } > SRAM
+
+ .bss :
+ {
+ _bss = .;
+ *(.bss*)
+ *(COMMON)
+ _ebss = .;
+ } > SRAM
+}
diff --git a/boards/ek-tm4c123gxl/mpu_fault/mpu_fault.sct b/boards/ek-tm4c123gxl/mpu_fault/mpu_fault.sct new file mode 100644 index 0000000..9a45245 --- /dev/null +++ b/boards/ek-tm4c123gxl/mpu_fault/mpu_fault.sct @@ -0,0 +1,47 @@ +;******************************************************************************
+;
+; mpu_fault.sct - Linker configuration file for mpu_fault.
+;
+; Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+; Software License Agreement
+;
+; Texas Instruments (TI) is supplying this software for use solely and
+; exclusively on TI's microcontroller products. The software is owned by
+; TI and/or its suppliers, and is protected under applicable copyright
+; laws. You may not combine this software with "viral" open-source
+; software in order to form a larger program.
+;
+; THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+; NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+; NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+; A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+; CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+; DAMAGES, FOR ANY REASON WHATSOEVER.
+;
+; This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+;
+;******************************************************************************
+
+LR_IROM 0x00000000 0x00040000
+{
+ ;
+ ; Specify the Execution Address of the code and the size.
+ ;
+ ER_IROM 0x00000000 0x00040000
+ {
+ *.o (RESET, +First)
+ * (InRoot$$Sections, +RO)
+ }
+
+ ;
+ ; Specify the Execution Address of the data area.
+ ;
+ RW_IRAM 0x20000000 0x00008000
+ {
+ ;
+ ; Uncomment the following line in order to use IntRegister().
+ ;
+ ;* (vtable, +First)
+ * (+RW, +ZI)
+ }
+}
diff --git a/boards/ek-tm4c123gxl/mpu_fault/mpu_fault.uvopt b/boards/ek-tm4c123gxl/mpu_fault/mpu_fault.uvopt new file mode 100644 index 0000000..d3d06ca --- /dev/null +++ b/boards/ek-tm4c123gxl/mpu_fault/mpu_fault.uvopt @@ -0,0 +1,303 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+ <SchemaVersion>1.0</SchemaVersion>
+
+ <Header>### uVision Project, (C) Keil Software</Header>
+
+ <Extensions>
+ <cExt>*.c</cExt>
+ <aExt>*.s*; *.src; *.a*</aExt>
+ <oExt>*.obj</oExt>
+ <lExt>*.lib</lExt>
+ <tExt>*.txt; *.h; *.inc</tExt>
+ <pExt>*.plm</pExt>
+ <CppX>*.cpp</CppX>
+ </Extensions>
+
+ <DaveTm>
+ <dwLowDateTime>0</dwLowDateTime>
+ <dwHighDateTime>0</dwHighDateTime>
+ </DaveTm>
+
+ <Target>
+ <TargetName>mpu_fault</TargetName>
+ <ToolsetNumber>0x4</ToolsetNumber>
+ <ToolsetName>ARM-ADS</ToolsetName>
+ <TargetOption>
+ <CLKADS>8000000</CLKADS>
+ <OPTTT>
+ <gFlags>1</gFlags>
+ <BeepAtEnd>1</BeepAtEnd>
+ <RunSim>1</RunSim>
+ <RunTarget>0</RunTarget>
+ </OPTTT>
+ <OPTHX>
+ <HexSelection>1</HexSelection>
+ <FlashByte>65535</FlashByte>
+ <HexRangeLowAddress>0</HexRangeLowAddress>
+ <HexRangeHighAddress>0</HexRangeHighAddress>
+ <HexOffset>0</HexOffset>
+ </OPTHX>
+ <OPTLEX>
+ <PageWidth>79</PageWidth>
+ <PageLength>66</PageLength>
+ <TabStop>8</TabStop>
+ <ListingPath>.\rvmdk\</ListingPath>
+ </OPTLEX>
+ <ListingPage>
+ <CreateCListing>1</CreateCListing>
+ <CreateAListing>1</CreateAListing>
+ <CreateLListing>1</CreateLListing>
+ <CreateIListing>0</CreateIListing>
+ <AsmCond>1</AsmCond>
+ <AsmSymb>1</AsmSymb>
+ <AsmXref>0</AsmXref>
+ <CCond>1</CCond>
+ <CCode>0</CCode>
+ <CListInc>0</CListInc>
+ <CSymb>0</CSymb>
+ <LinkerCodeListing>0</LinkerCodeListing>
+ </ListingPage>
+ <OPTXL>
+ <LMap>1</LMap>
+ <LComments>1</LComments>
+ <LGenerateSymbols>1</LGenerateSymbols>
+ <LLibSym>1</LLibSym>
+ <LLines>1</LLines>
+ <LLocSym>1</LLocSym>
+ <LPubSym>1</LPubSym>
+ <LXref>0</LXref>
+ <LExpSel>0</LExpSel>
+ </OPTXL>
+ <OPTFL>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <IsCurrentTarget>1</IsCurrentTarget>
+ </OPTFL>
+ <CpuCode>255</CpuCode>
+ <Books>
+ <Book>
+ <Number>0</Number>
+ <Title>Data Sheet</Title>
+ <Path>DATASHTS\Luminary\TM4C123GH6PM.PDF</Path>
+ </Book>
+ </Books>
+ <DllOpt>
+ <SimDllName>SARMCM3.DLL</SimDllName>
+ <SimDllArguments>-MPU</SimDllArguments>
+ <SimDlgDllName>DCM.DLL</SimDlgDllName>
+ <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+ <TargetDllName>SARMCM3.DLL</TargetDllName>
+ <TargetDllArguments>-MPU</TargetDllArguments>
+ <TargetDlgDllName>TCM.DLL</TargetDlgDllName>
+ <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+ </DllOpt>
+ <DebugOpt>
+ <uSim>0</uSim>
+ <uTrg>1</uTrg>
+ <sLdApp>1</sLdApp>
+ <sGomain>1</sGomain>
+ <sRbreak>1</sRbreak>
+ <sRwatch>1</sRwatch>
+ <sRmem>1</sRmem>
+ <sRfunc>1</sRfunc>
+ <sRbox>1</sRbox>
+ <tLdApp>1</tLdApp>
+ <tGomain>0</tGomain>
+ <tRbreak>1</tRbreak>
+ <tRwatch>1</tRwatch>
+ <tRmem>1</tRmem>
+ <tRfunc>0</tRfunc>
+ <tRbox>1</tRbox>
+ <sRunDeb>0</sRunDeb>
+ <sLrtime>0</sLrtime>
+ <nTsel>4</nTsel>
+ <sDll></sDll>
+ <sDllPa></sDllPa>
+ <sDlgDll></sDlgDll>
+ <sDlgPa></sDlgPa>
+ <sIfile></sIfile>
+ <tDll></tDll>
+ <tDllPa></tDllPa>
+ <tDlgDll></tDlgDll>
+ <tDlgPa></tDlgPa>
+ <tIfile></tIfile>
+ <pMon>BIN\lmidk-agdi.dll</pMon>
+ </DebugOpt>
+ <TargetDriverDllRegistry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>lmidk-agdi</Key>
+ <Name>-O4614 -S3 -FO29</Name>
+ </SetRegEntry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>DLGTARM</Key>
+ <Name></Name>
+ </SetRegEntry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>ARMDBGFLAGS</Key>
+ <Name></Name>
+ </SetRegEntry>
+ </TargetDriverDllRegistry>
+ <DebugFlag>
+ <trace>0</trace>
+ <periodic>1</periodic>
+ <aLwin>0</aLwin>
+ <aCover>0</aCover>
+ <aSer1>0</aSer1>
+ <aSer2>0</aSer2>
+ <aPa>0</aPa>
+ <viewmode>1</viewmode>
+ <vrSel>0</vrSel>
+ <aSym>0</aSym>
+ <aTbox>0</aTbox>
+ <AscS1>0</AscS1>
+ <AscS2>0</AscS2>
+ <AscS3>0</AscS3>
+ <aSer3>0</aSer3>
+ <eProf>0</eProf>
+ <aLa>0</aLa>
+ <aPa1>0</aPa1>
+ <AscS4>0</AscS4>
+ <aSer4>0</aSer4>
+ <StkLoc>0</StkLoc>
+ <TrcWin>0</TrcWin>
+ <newCpu>0</newCpu>
+ <uProt>0</uProt>
+ </DebugFlag>
+ <LintExecutable></LintExecutable>
+ <LintConfigFile></LintConfigFile>
+ </TargetOption>
+ </Target>
+
+ <Group>
+ <GroupName>Source</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>1</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\mpu_fault.c</PathWithFileName>
+ <FilenameWithoutPath>mpu_fault.c</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>2</FileNumber>
+ <FileType>2</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\startup_rvmdk.S</PathWithFileName>
+ <FilenameWithoutPath>startup_rvmdk.S</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>3</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\utils\uartstdio.c</PathWithFileName>
+ <FilenameWithoutPath>uartstdio.c</FilenameWithoutPath>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>Libraries</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>4</FileNumber>
+ <FileType>4</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\driverlib\rvmdk\driverlib.lib</PathWithFileName>
+ <FilenameWithoutPath>driverlib.lib</FilenameWithoutPath>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>Documentation</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>3</GroupNumber>
+ <FileNumber>5</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <Focus>1</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>1</TopLine>
+ <CurrentLine>1</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\readme.txt</PathWithFileName>
+ <FilenameWithoutPath>readme.txt</FilenameWithoutPath>
+ <WindowPosition>
+ <length>44</length>
+ <flags>0</flags>
+ <showCmd>1</showCmd>
+ <MinPosition>
+ <xPos>-1</xPos>
+ <yPos>-1</yPos>
+ </MinPosition>
+ <MaxPosition>
+ <xPos>-1</xPos>
+ <yPos>-1</yPos>
+ </MaxPosition>
+ <NormalPosition>
+ <Top>0</Top>
+ <Left>0</Left>
+ <Right>729</Right>
+ <Bottom>300</Bottom>
+ </NormalPosition>
+ </WindowPosition>
+ </File>
+ </Group>
+
+ <MDIGroups>
+ <Orientation>1</Orientation>
+ <ActiveMDIGroup>0</ActiveMDIGroup>
+ <MDIGroup>
+ <Size>100</Size>
+ <ActiveTab>0</ActiveTab>
+ <Documents>
+ <Doc>
+ <Name>.\readme.txt</Name>
+ <ColumnNumber>0</ColumnNumber>
+ <TopLine>1</TopLine>
+ <CurrentLine>1</CurrentLine>
+ </Doc>
+ </Documents>
+ </MDIGroup>
+ </MDIGroups>
+
+</ProjectOpt>
diff --git a/boards/ek-tm4c123gxl/mpu_fault/mpu_fault.uvproj b/boards/ek-tm4c123gxl/mpu_fault/mpu_fault.uvproj new file mode 100644 index 0000000..663abcc --- /dev/null +++ b/boards/ek-tm4c123gxl/mpu_fault/mpu_fault.uvproj @@ -0,0 +1,429 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+ <SchemaVersion>1.1</SchemaVersion>
+
+ <Header>### uVision Project, (C) Keil Software</Header>
+
+ <Targets>
+ <Target>
+ <TargetName>mpu_fault</TargetName>
+ <ToolsetNumber>0x4</ToolsetNumber>
+ <ToolsetName>ARM-ADS</ToolsetName>
+ <TargetOption>
+ <TargetCommonOption>
+ <Device>TM4C123GH6PM</Device>
+ <Vendor>Texas Instruments</Vendor>
+ <Cpu>IRAM(0x20000000-0x20007FFF) IROM(0-0x3FFFF) CLOCK(8000000) CPUTYPE("Cortex-M4") FPU2</Cpu>
+ <FlashUtilSpec></FlashUtilSpec>
+ <StartupFile>"STARTUP\Luminary\Startup.s" ("Luminary Startup Code")</StartupFile>
+ <FlashDriverDll>UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0LM4F_256 -FS00 -FL040000)</FlashDriverDll>
+ <DeviceId>5919</DeviceId>
+ <RegisterFile>LM4Fxxxx.H</RegisterFile>
+ <MemoryEnv></MemoryEnv>
+ <Cmp></Cmp>
+ <Asm></Asm>
+ <Linker></Linker>
+ <OHString></OHString>
+ <InfinionOptionDll></InfinionOptionDll>
+ <SLE66CMisc></SLE66CMisc>
+ <SLE66AMisc></SLE66AMisc>
+ <SLE66LinkerMisc></SLE66LinkerMisc>
+ <UseEnv>0</UseEnv>
+ <BinPath></BinPath>
+ <IncludePath></IncludePath>
+ <LibPath></LibPath>
+ <RegisterFilePath>Luminary\</RegisterFilePath>
+ <DBRegisterFilePath>Luminary\</DBRegisterFilePath>
+ <TargetStatus>
+ <Error>0</Error>
+ <ExitCodeStop>0</ExitCodeStop>
+ <ButtonStop>0</ButtonStop>
+ <NotGenerated>0</NotGenerated>
+ <InvalidFlash>1</InvalidFlash>
+ </TargetStatus>
+ <OutputDirectory>.\rvmdk\</OutputDirectory>
+ <OutputName>mpu_fault</OutputName>
+ <CreateExecutable>1</CreateExecutable>
+ <CreateLib>0</CreateLib>
+ <CreateHexFile>0</CreateHexFile>
+ <DebugInformation>1</DebugInformation>
+ <BrowseInformation>1</BrowseInformation>
+ <ListingPath>.\rvmdk\</ListingPath>
+ <HexFormatSelection>1</HexFormatSelection>
+ <Merge32K>0</Merge32K>
+ <CreateBatchFile>0</CreateBatchFile>
+ <BeforeCompile>
+ <RunUserProg1>0</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name></UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </BeforeCompile>
+ <BeforeMake>
+ <RunUserProg1>0</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name></UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </BeforeMake>
+ <AfterMake>
+ <RunUserProg1>1</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name>fromelf --bin --output .\rvmdk\mpu_fault.bin .\rvmdk\mpu_fault.axf</UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </AfterMake>
+ <SelectedForBatchBuild>0</SelectedForBatchBuild>
+ <SVCSIdString></SVCSIdString>
+ </TargetCommonOption>
+ <CommonProperty>
+ <UseCPPCompiler>0</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <DllOption>
+ <SimDllName>SARMCM3.DLL</SimDllName>
+ <SimDllArguments>-MPU</SimDllArguments>
+ <SimDlgDll>DCM.DLL</SimDlgDll>
+ <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+ <TargetDllName>SARMCM3.DLL</TargetDllName>
+ <TargetDllArguments>-MPU</TargetDllArguments>
+ <TargetDlgDll>TCM.DLL</TargetDlgDll>
+ <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+ </DllOption>
+ <DebugOption>
+ <OPTHX>
+ <HexSelection>1</HexSelection>
+ <HexRangeLowAddress>0</HexRangeLowAddress>
+ <HexRangeHighAddress>0</HexRangeHighAddress>
+ <HexOffset>0</HexOffset>
+ <Oh166RecLen>16</Oh166RecLen>
+ </OPTHX>
+ <Simulator>
+ <UseSimulator>0</UseSimulator>
+ <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+ <RunToMain>1</RunToMain>
+ <RestoreBreakpoints>1</RestoreBreakpoints>
+ <RestoreWatchpoints>1</RestoreWatchpoints>
+ <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+ <RestoreFunctions>1</RestoreFunctions>
+ <RestoreToolbox>1</RestoreToolbox>
+ <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+ </Simulator>
+ <Target>
+ <UseTarget>1</UseTarget>
+ <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+ <RunToMain>0</RunToMain>
+ <RestoreBreakpoints>1</RestoreBreakpoints>
+ <RestoreWatchpoints>1</RestoreWatchpoints>
+ <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+ <RestoreFunctions>0</RestoreFunctions>
+ <RestoreToolbox>1</RestoreToolbox>
+ </Target>
+ <RunDebugAfterBuild>0</RunDebugAfterBuild>
+ <TargetSelection>4</TargetSelection>
+ <SimDlls>
+ <CpuDll></CpuDll>
+ <CpuDllArguments></CpuDllArguments>
+ <PeripheralDll></PeripheralDll>
+ <PeripheralDllArguments></PeripheralDllArguments>
+ <InitializationFile></InitializationFile>
+ </SimDlls>
+ <TargetDlls>
+ <CpuDll></CpuDll>
+ <CpuDllArguments></CpuDllArguments>
+ <PeripheralDll></PeripheralDll>
+ <PeripheralDllArguments></PeripheralDllArguments>
+ <InitializationFile></InitializationFile>
+ <Driver>BIN\lmidk-agdi.dll</Driver>
+ </TargetDlls>
+ </DebugOption>
+ <Utilities>
+ <Flash1>
+ <UseTargetDll>1</UseTargetDll>
+ <UseExternalTool>0</UseExternalTool>
+ <RunIndependent>0</RunIndependent>
+ <UpdateFlashBeforeDebugging>0</UpdateFlashBeforeDebugging>
+ <Capability>1</Capability>
+ <DriverSelection>4099</DriverSelection>
+ </Flash1>
+ <Flash2>BIN\lmidk-agdi.dll</Flash2>
+ <Flash3></Flash3>
+ <Flash4></Flash4>
+ </Utilities>
+ <TargetArmAds>
+ <ArmAdsMisc>
+ <GenerateListings>0</GenerateListings>
+ <asHll>1</asHll>
+ <asAsm>1</asAsm>
+ <asMacX>1</asMacX>
+ <asSyms>1</asSyms>
+ <asFals>1</asFals>
+ <asDbgD>1</asDbgD>
+ <asForm>1</asForm>
+ <ldLst>0</ldLst>
+ <ldmm>1</ldmm>
+ <ldXref>1</ldXref>
+ <BigEnd>0</BigEnd>
+ <AdsALst>0</AdsALst>
+ <AdsACrf>0</AdsACrf>
+ <AdsANop>0</AdsANop>
+ <AdsANot>0</AdsANot>
+ <AdsLLst>1</AdsLLst>
+ <AdsLmap>1</AdsLmap>
+ <AdsLcgr>1</AdsLcgr>
+ <AdsLsym>1</AdsLsym>
+ <AdsLszi>1</AdsLszi>
+ <AdsLtoi>1</AdsLtoi>
+ <AdsLsun>1</AdsLsun>
+ <AdsLven>1</AdsLven>
+ <AdsLsxf>1</AdsLsxf>
+ <RvctClst>0</RvctClst>
+ <GenPPlst>0</GenPPlst>
+ <AdsCpuType>"Cortex-M4"</AdsCpuType>
+ <RvctDeviceName></RvctDeviceName>
+ <mOS>0</mOS>
+ <uocRom>0</uocRom>
+ <uocRam>0</uocRam>
+ <hadIROM>1</hadIROM>
+ <hadIRAM>1</hadIRAM>
+ <hadXRAM>0</hadXRAM>
+ <uocXRam>0</uocXRam>
+ <RvdsVP>2</RvdsVP>
+ <hadIRAM2>0</hadIRAM2>
+ <hadIROM2>0</hadIROM2>
+ <StupSel>8</StupSel>
+ <useUlib>1</useUlib>
+ <EndSel>0</EndSel>
+ <uLtcg>0</uLtcg>
+ <RoSelD>3</RoSelD>
+ <RwSelD>3</RwSelD>
+ <CodeSel>0</CodeSel>
+ <OptFeed>0</OptFeed>
+ <NoZi1>0</NoZi1>
+ <NoZi2>0</NoZi2>
+ <NoZi3>0</NoZi3>
+ <NoZi4>0</NoZi4>
+ <NoZi5>0</NoZi5>
+ <Ro1Chk>0</Ro1Chk>
+ <Ro2Chk>0</Ro2Chk>
+ <Ro3Chk>0</Ro3Chk>
+ <Ir1Chk>1</Ir1Chk>
+ <Ir2Chk>0</Ir2Chk>
+ <Ra1Chk>0</Ra1Chk>
+ <Ra2Chk>0</Ra2Chk>
+ <Ra3Chk>0</Ra3Chk>
+ <Im1Chk>1</Im1Chk>
+ <Im2Chk>0</Im2Chk>
+ <OnChipMemories>
+ <Ocm1>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm1>
+ <Ocm2>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm2>
+ <Ocm3>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm3>
+ <Ocm4>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm4>
+ <Ocm5>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm5>
+ <Ocm6>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm6>
+ <IRAM>
+ <Type>0</Type>
+ <StartAddress>0x20000000</StartAddress>
+ <Size>0x8000</Size>
+ </IRAM>
+ <IROM>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x40000</Size>
+ </IROM>
+ <XRAM>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </XRAM>
+ <OCR_RVCT1>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT1>
+ <OCR_RVCT2>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT2>
+ <OCR_RVCT3>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT3>
+ <OCR_RVCT4>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x40000</Size>
+ </OCR_RVCT4>
+ <OCR_RVCT5>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT5>
+ <OCR_RVCT6>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT6>
+ <OCR_RVCT7>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT7>
+ <OCR_RVCT8>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT8>
+ <OCR_RVCT9>
+ <Type>0</Type>
+ <StartAddress>0x20000000</StartAddress>
+ <Size>0x8000</Size>
+ </OCR_RVCT9>
+ <OCR_RVCT10>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT10>
+ </OnChipMemories>
+ <RvctStartVector></RvctStartVector>
+ </ArmAdsMisc>
+ <Cads>
+ <interw>0</interw>
+ <Optim>3</Optim>
+ <oTime>0</oTime>
+ <SplitLS>0</SplitLS>
+ <OneElfS>1</OneElfS>
+ <Strict>0</Strict>
+ <EnumInt>0</EnumInt>
+ <PlainCh>0</PlainCh>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <wLevel>2</wLevel>
+ <uThumb>0</uThumb>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define>rvmdk PART_TM4C123GH6PM TARGET_IS_TM4C123_RB1</Define>
+ <Undefine></Undefine>
+ <IncludePath>..\..\..\..;..\..\..\..;</IncludePath>
+ </VariousControls>
+ </Cads>
+ <Aads>
+ <interw>1</interw>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <thumb>0</thumb>
+ <SplitLS>0</SplitLS>
+ <SwStkChk>0</SwStkChk>
+ <NoWarn>0</NoWarn>
+ <VariousControls>
+ <MiscControls></MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Aads>
+ <LDads>
+ <umfTarg>0</umfTarg>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <noStLib>0</noStLib>
+ <RepFail>1</RepFail>
+ <useFile>0</useFile>
+ <TextAddressRange>0x00000000</TextAddressRange>
+ <DataAddressRange>0x20000000</DataAddressRange>
+ <ScatterFile>mpu_fault.sct</ScatterFile>
+ <IncludeLibs></IncludeLibs>
+ <IncludeLibsPath></IncludeLibsPath>
+ <Misc>--entry Reset_Handler</Misc>
+ <LinkerInputFile></LinkerInputFile>
+ <DisabledWarnings></DisabledWarnings>
+ </LDads>
+ </TargetArmAds>
+ </TargetOption>
+ <Groups>
+ <Group>
+ <GroupName>Source</GroupName>
+ <Files>
+ <File>
+ <FileName>mpu_fault.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>.\mpu_fault.c</FilePath>
+ </File>
+ <File>
+ <FileName>startup_rvmdk.S</FileName>
+ <FileType>2</FileType>
+ <FilePath>.\startup_rvmdk.S</FilePath>
+ </File>
+ <File>
+ <FileName>uartstdio.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>..\..\..\..\utils\uartstdio.c</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>Libraries</GroupName>
+ <Files>
+ <File>
+ <FileName>driverlib.lib</FileName>
+ <FileType>4</FileType>
+ <FilePath>..\..\..\..\driverlib\rvmdk\driverlib.lib</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>Documentation</GroupName>
+ <Files>
+ <File>
+ <FileName>readme.txt</FileName>
+ <FileType>5</FileType>
+ <FilePath>.\readme.txt</FilePath>
+ </File>
+ </Files>
+ </Group>
+ </Groups>
+ </Target>
+ </Targets>
+
+</Project>
diff --git a/boards/ek-tm4c123gxl/mpu_fault/mpu_fault_ccs.cmd b/boards/ek-tm4c123gxl/mpu_fault/mpu_fault_ccs.cmd new file mode 100644 index 0000000..e431841 --- /dev/null +++ b/boards/ek-tm4c123gxl/mpu_fault/mpu_fault_ccs.cmd @@ -0,0 +1,70 @@ +/******************************************************************************
+ *
+ * mpu_fault_ccs.cmd - CCS linker configuration file for mpu_fault.
+ *
+ * Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+ * Software License Agreement
+ *
+ * Texas Instruments (TI) is supplying this software for use solely and
+ * exclusively on TI's microcontroller products. The software is owned by
+ * TI and/or its suppliers, and is protected under applicable copyright
+ * laws. You may not combine this software with "viral" open-source
+ * software in order to form a larger program.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+ * NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+ * NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+ * CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+ * DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ * This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+ *
+ *****************************************************************************/
+
+--retain=g_pfnVectors
+
+/* The following command line options are set as part of the CCS project. */
+/* If you are building using the command line, or for some reason want to */
+/* define them here, you can uncomment and modify these lines as needed. */
+/* If you are using CCS for building, it is probably better to make any such */
+/* modifications in your CCS project and leave this file alone. */
+/* */
+/* --heap_size=0 */
+/* --stack_size=256 */
+/* --library=rtsv7M3_T_le_eabi.lib */
+
+/* The starting address of the application. Normally the interrupt vectors */
+/* must be located at the beginning of the application. */
+#define APP_BASE 0x00000000
+#define RAM_BASE 0x20000000
+
+/* System memory map */
+
+MEMORY
+{
+ /* Application stored in and executes from internal flash */
+ FLASH (RX) : origin = APP_BASE, length = 0x00040000
+ /* Application uses internal RAM for data */
+ SRAM (RWX) : origin = 0x20000000, length = 0x00008000
+}
+
+/* Section allocation in memory */
+
+SECTIONS
+{
+ .intvecs: > APP_BASE
+ .text : > FLASH
+ .const : > FLASH
+ .cinit : > FLASH
+ .pinit : > FLASH
+ .init_array : > FLASH
+
+ .vtable : > RAM_BASE
+ .data : > SRAM
+ .bss : > SRAM
+ .sysmem : > SRAM
+ .stack : > SRAM
+}
+
+__STACK_TOP = __stack + 256;
diff --git a/boards/ek-tm4c123gxl/mpu_fault/readme.txt b/boards/ek-tm4c123gxl/mpu_fault/readme.txt new file mode 100644 index 0000000..00f417b --- /dev/null +++ b/boards/ek-tm4c123gxl/mpu_fault/readme.txt @@ -0,0 +1,28 @@ +MPU
+
+This example application demonstrates the use of the MPU to protect a
+region of memory from access, and to generate a memory management fault
+when there is an access violation.
+
+UART0, connected to the virtual serial port and running at 115,200, 8-N-1,
+is used to display messages from this application.
+
+-------------------------------------------------------------------------------
+
+Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+Software License Agreement
+
+Texas Instruments (TI) is supplying this software for use solely and
+exclusively on TI's microcontroller products. The software is owned by
+TI and/or its suppliers, and is protected under applicable copyright
+laws. You may not combine this software with "viral" open-source
+software in order to form a larger program.
+
+THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+DAMAGES, FOR ANY REASON WHATSOEVER.
+
+This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
diff --git a/boards/ek-tm4c123gxl/mpu_fault/rvmdk/mpu_fault.axf b/boards/ek-tm4c123gxl/mpu_fault/rvmdk/mpu_fault.axf Binary files differnew file mode 100644 index 0000000..f529b46 --- /dev/null +++ b/boards/ek-tm4c123gxl/mpu_fault/rvmdk/mpu_fault.axf diff --git a/boards/ek-tm4c123gxl/mpu_fault/rvmdk/mpu_fault.bin b/boards/ek-tm4c123gxl/mpu_fault/rvmdk/mpu_fault.bin Binary files differnew file mode 100644 index 0000000..7ce9823 --- /dev/null +++ b/boards/ek-tm4c123gxl/mpu_fault/rvmdk/mpu_fault.bin diff --git a/boards/ek-tm4c123gxl/mpu_fault/startup_ccs.c b/boards/ek-tm4c123gxl/mpu_fault/startup_ccs.c new file mode 100644 index 0000000..47c1c31 --- /dev/null +++ b/boards/ek-tm4c123gxl/mpu_fault/startup_ccs.c @@ -0,0 +1,302 @@ +//*****************************************************************************
+//
+// startup_ccs.c - Startup code for use with TI's Code Composer Studio.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// External declaration for the reset handler that is to be called when the
+// processor is started
+//
+//*****************************************************************************
+extern void _c_int00(void);
+
+//*****************************************************************************
+//
+// Linker variable that marks the top of the stack.
+//
+//*****************************************************************************
+extern uint32_t __STACK_TOP;
+
+//*****************************************************************************
+//
+// External declaration for the interrupt handler used by the application.
+//
+//*****************************************************************************
+extern void MPUFaultHandler(void);
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000 or at the start of
+// the program if located at a start address other than 0.
+//
+//*****************************************************************************
+#pragma DATA_SECTION(g_pfnVectors, ".intvecs")
+void (* const g_pfnVectors[])(void) =
+{
+ (void (*)(void))((uint32_t)&__STACK_TOP),
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ MPUFaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ IntDefaultHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ IntDefaultHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ IntDefaultHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ //
+ // Jump to the CCS C initialization routine. This will enable the
+ // floating-point unit as well, so that does not need to be done here.
+ //
+ __asm(" .global _c_int00\n"
+ " b.w _c_int00");
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/mpu_fault/startup_ewarm.c b/boards/ek-tm4c123gxl/mpu_fault/startup_ewarm.c new file mode 100644 index 0000000..bcf9e37 --- /dev/null +++ b/boards/ek-tm4c123gxl/mpu_fault/startup_ewarm.c @@ -0,0 +1,333 @@ +//*****************************************************************************
+//
+// startup_ewarm.c - Startup code for use with IAR's Embedded Workbench,
+// version 5.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Enable the IAR extensions for this source file.
+//
+//*****************************************************************************
+#pragma language=extended
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// External declaration for the interrupt handler used by the application.
+//
+//*****************************************************************************
+extern void MPUFaultHandler(void);
+
+//*****************************************************************************
+//
+// The entry point for the application startup code.
+//
+//*****************************************************************************
+extern void __iar_program_start(void);
+
+//*****************************************************************************
+//
+// Reserve space for the system stack.
+//
+//*****************************************************************************
+static uint32_t pui32Stack[64] @ ".noinit";
+
+//*****************************************************************************
+//
+// A union that describes the entries of the vector table. The union is needed
+// since the first entry is the stack pointer and the remainder are function
+// pointers.
+//
+//*****************************************************************************
+typedef union
+{
+ void (*pfnHandler)(void);
+ uint32_t ui32Ptr;
+}
+uVectorEntry;
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000.
+//
+//*****************************************************************************
+__root const uVectorEntry __vector_table[] @ ".intvec" =
+{
+ { .ui32Ptr = (uint32_t)pui32Stack + sizeof(pui32Stack) },
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ MPUFaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ IntDefaultHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ IntDefaultHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ IntDefaultHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ //
+ // Enable the floating-point unit. This must be done here to handle the
+ // case where main() uses floating-point and the function prologue saves
+ // floating-point registers (which will fault if floating-point is not
+ // enabled). Any configuration of the floating-point unit using DriverLib
+ // APIs must be done here prior to the floating-point unit being enabled.
+ //
+ // Note that this does not use DriverLib since it might not be included in
+ // this project.
+ //
+ HWREG(NVIC_CPAC) = ((HWREG(NVIC_CPAC) &
+ ~(NVIC_CPAC_CP10_M | NVIC_CPAC_CP11_M)) |
+ NVIC_CPAC_CP10_FULL | NVIC_CPAC_CP11_FULL);
+
+ //
+ // Call the application's entry point.
+ //
+ __iar_program_start();
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/mpu_fault/startup_gcc.c b/boards/ek-tm4c123gxl/mpu_fault/startup_gcc.c new file mode 100644 index 0000000..6d88c8a --- /dev/null +++ b/boards/ek-tm4c123gxl/mpu_fault/startup_gcc.c @@ -0,0 +1,349 @@ +//*****************************************************************************
+//
+// startup_gcc.c - Startup code for use with GNU tools.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// External declaration for the interrupt handler used by the application.
+//
+//*****************************************************************************
+extern void MPUFaultHandler(void);
+
+//*****************************************************************************
+//
+// The entry point for the application.
+//
+//*****************************************************************************
+extern int main(void);
+
+//*****************************************************************************
+//
+// Reserve space for the system stack.
+//
+//*****************************************************************************
+static uint32_t pui32Stack[64];
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000.
+//
+//*****************************************************************************
+__attribute__ ((section(".isr_vector")))
+void (* const g_pfnVectors[])(void) =
+{
+ (void (*)(void))((uint32_t)pui32Stack + sizeof(pui32Stack)),
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ MPUFaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ IntDefaultHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ IntDefaultHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ IntDefaultHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// The following are constructs created by the linker, indicating where the
+// the "data" and "bss" segments reside in memory. The initializers for the
+// for the "data" segment resides immediately following the "text" segment.
+//
+//*****************************************************************************
+extern uint32_t _etext;
+extern uint32_t _data;
+extern uint32_t _edata;
+extern uint32_t _bss;
+extern uint32_t _ebss;
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ uint32_t *pui32Src, *pui32Dest;
+
+ //
+ // Copy the data segment initializers from flash to SRAM.
+ //
+ pui32Src = &_etext;
+ for(pui32Dest = &_data; pui32Dest < &_edata; )
+ {
+ *pui32Dest++ = *pui32Src++;
+ }
+
+ //
+ // Zero fill the bss segment.
+ //
+ __asm(" ldr r0, =_bss\n"
+ " ldr r1, =_ebss\n"
+ " mov r2, #0\n"
+ " .thumb_func\n"
+ "zero_loop:\n"
+ " cmp r0, r1\n"
+ " it lt\n"
+ " strlt r2, [r0], #4\n"
+ " blt zero_loop");
+
+ //
+ // Enable the floating-point unit. This must be done here to handle the
+ // case where main() uses floating-point and the function prologue saves
+ // floating-point registers (which will fault if floating-point is not
+ // enabled). Any configuration of the floating-point unit using DriverLib
+ // APIs must be done here prior to the floating-point unit being enabled.
+ //
+ // Note that this does not use DriverLib since it might not be included in
+ // this project.
+ //
+ HWREG(NVIC_CPAC) = ((HWREG(NVIC_CPAC) &
+ ~(NVIC_CPAC_CP10_M | NVIC_CPAC_CP11_M)) |
+ NVIC_CPAC_CP10_FULL | NVIC_CPAC_CP11_FULL);
+
+ //
+ // Call the application's entry point.
+ //
+ main();
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/mpu_fault/startup_rvmdk.S b/boards/ek-tm4c123gxl/mpu_fault/startup_rvmdk.S new file mode 100644 index 0000000..73e9ce9 --- /dev/null +++ b/boards/ek-tm4c123gxl/mpu_fault/startup_rvmdk.S @@ -0,0 +1,358 @@ +; <<< Use Configuration Wizard in Context Menu >>>
+;******************************************************************************
+;
+; startup_rvmdk.S - Startup code for use with Keil's uVision.
+;
+; Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+; Software License Agreement
+;
+; Texas Instruments (TI) is supplying this software for use solely and
+; exclusively on TI's microcontroller products. The software is owned by
+; TI and/or its suppliers, and is protected under applicable copyright
+; laws. You may not combine this software with "viral" open-source
+; software in order to form a larger program.
+;
+; THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+; NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+; NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+; A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+; CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+; DAMAGES, FOR ANY REASON WHATSOEVER.
+;
+; This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+;
+;******************************************************************************
+
+;******************************************************************************
+;
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+;******************************************************************************
+Stack EQU 0x00000100
+
+;******************************************************************************
+;
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+;******************************************************************************
+Heap EQU 0x00000000
+
+;******************************************************************************
+;
+; Allocate space for the stack.
+;
+;******************************************************************************
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+StackMem
+ SPACE Stack
+__initial_sp
+
+;******************************************************************************
+;
+; Allocate space for the heap.
+;
+;******************************************************************************
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+HeapMem
+ SPACE Heap
+__heap_limit
+
+;******************************************************************************
+;
+; Indicate that the code in this file preserves 8-byte alignment of the stack.
+;
+;******************************************************************************
+ PRESERVE8
+
+;******************************************************************************
+;
+; Place code into the reset code section.
+;
+;******************************************************************************
+ AREA RESET, CODE, READONLY
+ THUMB
+
+;******************************************************************************
+;
+; External declaration for the interrupt handler used by the application.
+;
+;******************************************************************************
+ EXTERN MPUFaultHandler
+
+;******************************************************************************
+;
+; The vector table.
+;
+;******************************************************************************
+ EXPORT __Vectors
+__Vectors
+ DCD StackMem + Stack ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NmiSR ; NMI Handler
+ DCD FaultISR ; Hard Fault Handler
+ DCD MPUFaultHandler ; The MPU fault handler
+ DCD IntDefaultHandler ; The bus fault handler
+ DCD IntDefaultHandler ; The usage fault handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; SVCall handler
+ DCD IntDefaultHandler ; Debug monitor handler
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; The PendSV handler
+ DCD IntDefaultHandler ; The SysTick handler
+ DCD IntDefaultHandler ; GPIO Port A
+ DCD IntDefaultHandler ; GPIO Port B
+ DCD IntDefaultHandler ; GPIO Port C
+ DCD IntDefaultHandler ; GPIO Port D
+ DCD IntDefaultHandler ; GPIO Port E
+ DCD IntDefaultHandler ; UART0 Rx and Tx
+ DCD IntDefaultHandler ; UART1 Rx and Tx
+ DCD IntDefaultHandler ; SSI0 Rx and Tx
+ DCD IntDefaultHandler ; I2C0 Master and Slave
+ DCD IntDefaultHandler ; PWM Fault
+ DCD IntDefaultHandler ; PWM Generator 0
+ DCD IntDefaultHandler ; PWM Generator 1
+ DCD IntDefaultHandler ; PWM Generator 2
+ DCD IntDefaultHandler ; Quadrature Encoder 0
+ DCD IntDefaultHandler ; ADC Sequence 0
+ DCD IntDefaultHandler ; ADC Sequence 1
+ DCD IntDefaultHandler ; ADC Sequence 2
+ DCD IntDefaultHandler ; ADC Sequence 3
+ DCD IntDefaultHandler ; Watchdog timer
+ DCD IntDefaultHandler ; Timer 0 subtimer A
+ DCD IntDefaultHandler ; Timer 0 subtimer B
+ DCD IntDefaultHandler ; Timer 1 subtimer A
+ DCD IntDefaultHandler ; Timer 1 subtimer B
+ DCD IntDefaultHandler ; Timer 2 subtimer A
+ DCD IntDefaultHandler ; Timer 2 subtimer B
+ DCD IntDefaultHandler ; Analog Comparator 0
+ DCD IntDefaultHandler ; Analog Comparator 1
+ DCD IntDefaultHandler ; Analog Comparator 2
+ DCD IntDefaultHandler ; System Control (PLL, OSC, BO)
+ DCD IntDefaultHandler ; FLASH Control
+ DCD IntDefaultHandler ; GPIO Port F
+ DCD IntDefaultHandler ; GPIO Port G
+ DCD IntDefaultHandler ; GPIO Port H
+ DCD IntDefaultHandler ; UART2 Rx and Tx
+ DCD IntDefaultHandler ; SSI1 Rx and Tx
+ DCD IntDefaultHandler ; Timer 3 subtimer A
+ DCD IntDefaultHandler ; Timer 3 subtimer B
+ DCD IntDefaultHandler ; I2C1 Master and Slave
+ DCD IntDefaultHandler ; Quadrature Encoder 1
+ DCD IntDefaultHandler ; CAN0
+ DCD IntDefaultHandler ; CAN1
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; Hibernate
+ DCD IntDefaultHandler ; USB0
+ DCD IntDefaultHandler ; PWM Generator 3
+ DCD IntDefaultHandler ; uDMA Software Transfer
+ DCD IntDefaultHandler ; uDMA Error
+ DCD IntDefaultHandler ; ADC1 Sequence 0
+ DCD IntDefaultHandler ; ADC1 Sequence 1
+ DCD IntDefaultHandler ; ADC1 Sequence 2
+ DCD IntDefaultHandler ; ADC1 Sequence 3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; GPIO Port J
+ DCD IntDefaultHandler ; GPIO Port K
+ DCD IntDefaultHandler ; GPIO Port L
+ DCD IntDefaultHandler ; SSI2 Rx and Tx
+ DCD IntDefaultHandler ; SSI3 Rx and Tx
+ DCD IntDefaultHandler ; UART3 Rx and Tx
+ DCD IntDefaultHandler ; UART4 Rx and Tx
+ DCD IntDefaultHandler ; UART5 Rx and Tx
+ DCD IntDefaultHandler ; UART6 Rx and Tx
+ DCD IntDefaultHandler ; UART7 Rx and Tx
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; I2C2 Master and Slave
+ DCD IntDefaultHandler ; I2C3 Master and Slave
+ DCD IntDefaultHandler ; Timer 4 subtimer A
+ DCD IntDefaultHandler ; Timer 4 subtimer B
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; Timer 5 subtimer A
+ DCD IntDefaultHandler ; Timer 5 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 0 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 0 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 1 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 1 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 2 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 2 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 3 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 3 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 4 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 4 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 5 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 5 subtimer B
+ DCD IntDefaultHandler ; FPU
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; I2C4 Master and Slave
+ DCD IntDefaultHandler ; I2C5 Master and Slave
+ DCD IntDefaultHandler ; GPIO Port M
+ DCD IntDefaultHandler ; GPIO Port N
+ DCD IntDefaultHandler ; Quadrature Encoder 2
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; GPIO Port P (Summary or P0)
+ DCD IntDefaultHandler ; GPIO Port P1
+ DCD IntDefaultHandler ; GPIO Port P2
+ DCD IntDefaultHandler ; GPIO Port P3
+ DCD IntDefaultHandler ; GPIO Port P4
+ DCD IntDefaultHandler ; GPIO Port P5
+ DCD IntDefaultHandler ; GPIO Port P6
+ DCD IntDefaultHandler ; GPIO Port P7
+ DCD IntDefaultHandler ; GPIO Port Q (Summary or Q0)
+ DCD IntDefaultHandler ; GPIO Port Q1
+ DCD IntDefaultHandler ; GPIO Port Q2
+ DCD IntDefaultHandler ; GPIO Port Q3
+ DCD IntDefaultHandler ; GPIO Port Q4
+ DCD IntDefaultHandler ; GPIO Port Q5
+ DCD IntDefaultHandler ; GPIO Port Q6
+ DCD IntDefaultHandler ; GPIO Port Q7
+ DCD IntDefaultHandler ; GPIO Port R
+ DCD IntDefaultHandler ; GPIO Port S
+ DCD IntDefaultHandler ; PWM 1 Generator 0
+ DCD IntDefaultHandler ; PWM 1 Generator 1
+ DCD IntDefaultHandler ; PWM 1 Generator 2
+ DCD IntDefaultHandler ; PWM 1 Generator 3
+ DCD IntDefaultHandler ; PWM 1 Fault
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor first starts execution
+; following a reset event.
+;
+;******************************************************************************
+ EXPORT Reset_Handler
+Reset_Handler
+ ;
+ ; Enable the floating-point unit. This must be done here to handle the
+ ; case where main() uses floating-point and the function prologue saves
+ ; floating-point registers (which will fault if floating-point is not
+ ; enabled). Any configuration of the floating-point unit using
+ ; DriverLib APIs must be done here prior to the floating-point unit
+ ; being enabled.
+ ;
+ ; Note that this does not use DriverLib since it might not be included
+ ; in this project.
+ ;
+ MOVW R0, #0xED88
+ MOVT R0, #0xE000
+ LDR R1, [R0]
+ ORR R1, #0x00F00000
+ STR R1, [R0]
+
+ ;
+ ; Call the C library enty point that handles startup. This will copy
+ ; the .data section initializers from flash to SRAM and zero fill the
+ ; .bss section.
+ ;
+ IMPORT __main
+ B __main
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives a NMI. This
+; simply enters an infinite loop, preserving the system state for examination
+; by a debugger.
+;
+;******************************************************************************
+NmiSR
+ B NmiSR
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives a fault
+; interrupt. This simply enters an infinite loop, preserving the system state
+; for examination by a debugger.
+;
+;******************************************************************************
+FaultISR
+ B FaultISR
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives an unexpected
+; interrupt. This simply enters an infinite loop, preserving the system state
+; for examination by a debugger.
+;
+;******************************************************************************
+IntDefaultHandler
+ B IntDefaultHandler
+
+;******************************************************************************
+;
+; Make sure the end of this section is aligned.
+;
+;******************************************************************************
+ ALIGN
+
+;******************************************************************************
+;
+; Some code in the normal code section for initializing the heap and stack.
+;
+;******************************************************************************
+ AREA |.text|, CODE, READONLY
+
+;******************************************************************************
+;
+; The function expected of the C library startup code for defining the stack
+; and heap memory locations. For the C library version of the startup code,
+; provide this function so that the C library initialization code can find out
+; the location of the stack and heap.
+;
+;******************************************************************************
+ IF :DEF: __MICROLIB
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+ ELSE
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+__user_initial_stackheap
+ LDR R0, =HeapMem
+ LDR R1, =(StackMem + Stack)
+ LDR R2, =(HeapMem + Heap)
+ LDR R3, =StackMem
+ BX LR
+ ENDIF
+
+;******************************************************************************
+;
+; Make sure the end of this section is aligned.
+;
+;******************************************************************************
+ ALIGN
+
+;******************************************************************************
+;
+; Tell the assembler that we're done.
+;
+;******************************************************************************
+ END
diff --git a/boards/ek-tm4c123gxl/project0/Makefile b/boards/ek-tm4c123gxl/project0/Makefile new file mode 100644 index 0000000..2a65343 --- /dev/null +++ b/boards/ek-tm4c123gxl/project0/Makefile @@ -0,0 +1,86 @@ +#******************************************************************************
+#
+# Makefile - Rules for building the Project Zero Example.
+#
+# Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+# Software License Agreement
+#
+# Texas Instruments (TI) is supplying this software for use solely and
+# exclusively on TI's microcontroller products. The software is owned by
+# TI and/or its suppliers, and is protected under applicable copyright
+# laws. You may not combine this software with "viral" open-source
+# software in order to form a larger program.
+#
+# THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+# NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+# NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+# CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+# DAMAGES, FOR ANY REASON WHATSOEVER.
+#
+# This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+#
+#******************************************************************************
+
+#
+# Defines the part type that this project uses.
+#
+PART=TM4C123GH6PM
+
+#
+# The base directory for TivaWare.
+#
+ROOT=../../../..
+
+#
+# Include the common make definitions.
+#
+include ${ROOT}/makedefs
+
+#
+# Where to find source files that do not live in this directory.
+#
+VPATH=../drivers
+VPATH+=../../../../utils
+
+#
+# Where to find header files that do not live in the source directory.
+#
+IPATH=..
+IPATH+=../../../..
+
+#
+# The default rule, which causes the Project Zero Example to be built.
+#
+all: ${COMPILER}
+all: ${COMPILER}/project0.axf
+
+#
+# The rule to clean out all the build products.
+#
+clean:
+ @rm -rf ${COMPILER} ${wildcard *~}
+
+#
+# The rule to create the target directory.
+#
+${COMPILER}:
+ @mkdir -p ${COMPILER}
+
+#
+# Rules for building the Project Zero Example.
+#
+${COMPILER}/project0.axf: ${COMPILER}/project0.o
+${COMPILER}/project0.axf: ${COMPILER}/startup_${COMPILER}.o
+${COMPILER}/project0.axf: ${ROOT}/driverlib/${COMPILER}/libdriver.a
+${COMPILER}/project0.axf: project0.ld
+SCATTERgcc_project0=project0.ld
+ENTRY_project0=ResetISR
+CFLAGSgcc=-DTARGET_IS_TM4C123_RB1
+
+#
+# Include the automatically generated dependency files.
+#
+ifneq (${MAKECMDGOALS},clean)
+-include ${wildcard ${COMPILER}/*.d} __dummy__
+endif
diff --git a/boards/ek-tm4c123gxl/project0/ccs/.ccsimportspec b/boards/ek-tm4c123gxl/project0/ccs/.ccsimportspec new file mode 100644 index 0000000..a3940d4 --- /dev/null +++ b/boards/ek-tm4c123gxl/project0/ccs/.ccsimportspec @@ -0,0 +1,8 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<importSpec>
+ <source root="..">
+ <file name="project0.c"/>
+ <file regex=".*_ccs\.cmd"/>
+ <file name="startup_ccs.c"/>
+ </source>
+</importSpec>
diff --git a/boards/ek-tm4c123gxl/project0/ccs/.ccsproject b/boards/ek-tm4c123gxl/project0/ccs/.ccsproject new file mode 100644 index 0000000..75fb50e --- /dev/null +++ b/boards/ek-tm4c123gxl/project0/ccs/.ccsproject @@ -0,0 +1,10 @@ +<?xml version="1.0" encoding="UTF-8" ?>
+<?ccsproject version="1.0"?>
+<projectOptions>
+ <deviceVariant value="Cortex M.TM4C123GH6PM"/>
+ <deviceFamily value="TMS470"/>
+ <deviceEndianness value="little"/>
+ <codegenToolVersion value="5.0.4"/>
+ <isElfFormat value="true"/>
+ <rts value="libc.a"/>
+</projectOptions>
diff --git a/boards/ek-tm4c123gxl/project0/ccs/.cproject b/boards/ek-tm4c123gxl/project0/ccs/.cproject new file mode 100644 index 0000000..1fffa62 --- /dev/null +++ b/boards/ek-tm4c123gxl/project0/ccs/.cproject @@ -0,0 +1,189 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+ <storageModule configRelations="2" moduleId="org.eclipse.cdt.core.settings">
+ <cconfiguration id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1178865563">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1178865563" moduleId="org.eclipse.cdt.core.settings" name="Debug">
+ <macros>
+ <stringMacro name="SW_ROOT" type="VALUE_PATH_DIR" value="${PROJECT_ROOT}/../../../../.."/>
+ </macros>
+ <externalSettings/>
+ <extensions>
+ <extension id="com.ti.ccstudio.binaryparser.CoffParser" point="org.eclipse.cdt.core.BinaryParser"/>
+ <extension id="com.ti.ccstudio.errorparser.CoffErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.LinkErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.AsmErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactExtension="out" artifactName="${ProjName}" buildProperties="" cleanCommand="${CG_CLEAN_CMD}" description="" id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1178865563" name="Debug" parent="com.ti.ccstudio.buildDefinitions.TMS470.Debug" postbuildStep=""${CCE_INSTALL_ROOT}/utils/tiobj2bin/tiobj2bin" "${BuildArtifactFileName}" "${BuildArtifactFileBaseName}.bin" "${CG_TOOL_ROOT}/bin/armofd" "${CG_TOOL_ROOT}/bin/armhex" "${CCE_INSTALL_ROOT}/utils/tiobj2bin/mkhex4bin"">
+ <folderInfo id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1178865563." name="/" resourcePath="">
+ <toolChain id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.DebugToolchain.1268222752" name="TI Build Tools" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.DebugToolchain" targetTool="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug.1604458695">
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS.1533693870" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS" valueType="stringList">
+ <listOptionValue builtIn="false" value="DEVICE_CONFIGURATION_ID=Cortex M.TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="DEVICE_ENDIANNESS=little"/>
+ <listOptionValue builtIn="false" value="OUTPUT_FORMAT=ELF"/>
+ <listOptionValue builtIn="false" value="CCS_MBS_VERSION=5.1.0.01"/>
+ <listOptionValue builtIn="false" value="RUNTIME_SUPPORT_LIBRARY=libc.a"/>
+ <listOptionValue builtIn="false" value="OUTPUT_TYPE=executable"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION.2080910543" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION" value="5.0.4" valueType="string"/>
+ <targetPlatform id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformDebug.1346302706" name="Platform" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformDebug"/>
+ <builder buildPath="${BuildDirectory}" id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderDebug.1053559331" name="GNU Make.Debug" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderDebug"/>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerDebug.1948375202" name="ARM Compiler" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerDebug">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.3814148" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.7M4" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.2099385856" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.886668723" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.eabi" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.1397179436" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.FPv4SPD16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL.237940617" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL.SYMDEBUG__DWARF" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING.2124759306" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING" valueType="stringList">
+ <listOptionValue builtIn="false" value="225"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER.1844601598" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.978233025" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH.840281559" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH" valueType="includePath">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/examples/boards/ek-tm4c123gxl""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN.105877942" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.1597563496" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.on" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL.1841806343" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL.2" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC.850215609" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL.1012452846" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE.897187839" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE" valueType="definedSymbols">
+ <listOptionValue builtIn="false" value="ccs="ccs""/>
+ <listOptionValue builtIn="false" value="PART_TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="TARGET_IS_TM4C123_RB1"/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS.268169706" name="C Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS.1845690666" name="C++ Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS.1372523849" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS.1555870894" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS"/>
+ </tool>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug.1604458695" name="ARM Linker" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE.882829029" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE" value=""project0_ccs.map"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE.87155293" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE" value="256" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE.611835718" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE" value="0" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE.1904194963" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE" value=""${ProjName}.out"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO.2146616211" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO" value=""${ProjName}_linkInfo.xml"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER.1928773004" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.173132329" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH.710413363" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH" valueType="libPaths">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/lib""/>
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY.1856145413" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY" valueType="libs">
+ <listOptionValue builtIn="false" value=""libc.a""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/driverlib/ccs/Debug/driverlib.lib""/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS.1767200249" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS.735849894" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS.2044855364" name="Generated Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS"/>
+ </tool>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ <cconfiguration id="com.ti.ccstudio.buildDefinitions.TMS470.Release.688240187">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.ti.ccstudio.buildDefinitions.TMS470.Release.688240187" moduleId="org.eclipse.cdt.core.settings" name="Release">
+ <macros>
+ <stringMacro name="SW_ROOT" type="VALUE_PATH_DIR" value="${PROJECT_ROOT}/../../../../.."/>
+ </macros>
+ <externalSettings/>
+ <extensions>
+ <extension id="com.ti.ccstudio.binaryparser.CoffParser" point="org.eclipse.cdt.core.BinaryParser"/>
+ <extension id="com.ti.ccstudio.errorparser.CoffErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.LinkErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.AsmErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactExtension="out" artifactName="${ProjName}" buildProperties="" cleanCommand="${CG_CLEAN_CMD}" description="" id="com.ti.ccstudio.buildDefinitions.TMS470.Release.688240187" name="Release" parent="com.ti.ccstudio.buildDefinitions.TMS470.Release" postbuildStep=""${CCE_INSTALL_ROOT}/utils/tiobj2bin/tiobj2bin" "${BuildArtifactFileName}" "${BuildArtifactFileBaseName}.bin" "${CG_TOOL_ROOT}/bin/armofd" "${CG_TOOL_ROOT}/bin/armhex" "${CCE_INSTALL_ROOT}/utils/tiobj2bin/mkhex4bin"">
+ <folderInfo id="com.ti.ccstudio.buildDefinitions.TMS470.Release.688240187." name="/" resourcePath="">
+ <toolChain id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.ReleaseToolchain.1687460935" name="TI Build Tools" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.ReleaseToolchain" targetTool="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease.1741952861">
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS.1367526355" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS" valueType="stringList">
+ <listOptionValue builtIn="false" value="DEVICE_CONFIGURATION_ID=Cortex M.TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="DEVICE_ENDIANNESS=little"/>
+ <listOptionValue builtIn="false" value="OUTPUT_FORMAT=ELF"/>
+ <listOptionValue builtIn="false" value="CCS_MBS_VERSION=5.1.0.01"/>
+ <listOptionValue builtIn="false" value="RUNTIME_SUPPORT_LIBRARY=libc.a"/>
+ <listOptionValue builtIn="false" value="OUTPUT_TYPE=executable"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION.556263817" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION" value="5.0.4" valueType="string"/>
+ <targetPlatform id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformRelease.888720574" name="Platform" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformRelease"/>
+ <builder buildPath="${BuildDirectory}" id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderRelease.1167736465" name="GNU Make.Release" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderRelease"/>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerRelease.595048410" name="ARM Compiler" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerRelease">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.156346621" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.7M4" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.866339537" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.1679609115" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.eabi" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.1794876134" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.FPv4SPD16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING.1655103204" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING" valueType="stringList">
+ <listOptionValue builtIn="false" value="225"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER.52297451" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.980137286" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH.1903036233" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH" valueType="includePath">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/examples/boards/ek-tm4c123gxl""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN.874067486" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.1450795443" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.on" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC.1234567835" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL.442530338" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE.273565776" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE" valueType="definedSymbols">
+ <listOptionValue builtIn="false" value="ccs="ccs""/>
+ <listOptionValue builtIn="false" value="PART_TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="TARGET_IS_TM4C123_RB1"/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS.1789119726" name="C Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS.2116880087" name="C++ Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS.318540938" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS.1056966681" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS"/>
+ </tool>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease.1741952861" name="ARM Linker" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE.960856778" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE" value=""project0_ccs.map"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE.1570017562" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE" value="256" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE.1982601516" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE" value="0" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE.251709476" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE" value=""${ProjName}.out"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO.628809307" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO" value=""${ProjName}_linkInfo.xml"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER.323591791" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.947680875" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH.139883583" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH" valueType="libPaths">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/lib""/>
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY.1672321782" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY" valueType="libs">
+ <listOptionValue builtIn="false" value=""libc.a""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/driverlib/ccs/Debug/driverlib.lib""/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS.880218243" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS.995972378" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS.1804995724" name="Generated Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS"/>
+ </tool>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <project id="project0.com.ti.ccstudio.buildDefinitions.TMS470.ProjectType.1067351383" name="ARM" projectType="com.ti.ccstudio.buildDefinitions.TMS470.ProjectType"/>
+ </storageModule>
+ <storageModule moduleId="scannerConfiguration"/>
+ <storageModule moduleId="org.eclipse.cdt.core.language.mapping">
+ <project-mappings>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.asmSource" language="com.ti.ccstudio.core.TIASMLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cHeader" language="com.ti.ccstudio.core.TIGCCLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cSource" language="com.ti.ccstudio.core.TIGCCLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cxxHeader" language="com.ti.ccstudio.core.TIGPPLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cxxSource" language="com.ti.ccstudio.core.TIGPPLanguage"/>
+ </project-mappings>
+ </storageModule>
+</cproject>
diff --git a/boards/ek-tm4c123gxl/project0/ccs/.project b/boards/ek-tm4c123gxl/project0/ccs/.project new file mode 100644 index 0000000..9254989 --- /dev/null +++ b/boards/ek-tm4c123gxl/project0/ccs/.project @@ -0,0 +1,50 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+ <name>project0</name>
+ <comment></comment>
+ <projects>
+ </projects>
+ <buildSpec>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+ <triggers>full,incremental,</triggers>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ </buildSpec>
+ <natures>
+ <nature>com.ti.ccstudio.core.ccsNature</nature>
+ <nature>org.eclipse.cdt.core.cnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+ <nature>org.eclipse.cdt.core.ccnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+ </natures>
+ <linkedResources>
+ <link>
+ <name>project0.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/project0/project0.c</locationURI>
+ </link>
+ <link>
+ <name>project0_ccs.cmd</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/project0/project0_ccs.cmd</locationURI>
+ </link>
+ <link>
+ <name>startup_ccs.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/project0/startup_ccs.c</locationURI>
+ </link>
+ </linkedResources>
+ <variableList>
+ <variable>
+ <name>SW_ROOT</name>
+ <value>$%7BPARENT-5-PROJECT_LOC%7D</value>
+ </variable>
+ </variableList>
+</projectDescription>
diff --git a/boards/ek-tm4c123gxl/project0/ccs/.settings/org.eclipse.cdt.codan.core.prefs b/boards/ek-tm4c123gxl/project0/ccs/.settings/org.eclipse.cdt.codan.core.prefs new file mode 100644 index 0000000..98b6350 --- /dev/null +++ b/boards/ek-tm4c123gxl/project0/ccs/.settings/org.eclipse.cdt.codan.core.prefs @@ -0,0 +1,3 @@ +eclipse.preferences.version=1
+inEditor=false
+onBuild=false
diff --git a/boards/ek-tm4c123gxl/project0/ccs/Debug/project0.bin b/boards/ek-tm4c123gxl/project0/ccs/Debug/project0.bin Binary files differnew file mode 100644 index 0000000..5130530 --- /dev/null +++ b/boards/ek-tm4c123gxl/project0/ccs/Debug/project0.bin diff --git a/boards/ek-tm4c123gxl/project0/ccs/Debug/project0.out b/boards/ek-tm4c123gxl/project0/ccs/Debug/project0.out Binary files differnew file mode 100644 index 0000000..1e7add1 --- /dev/null +++ b/boards/ek-tm4c123gxl/project0/ccs/Debug/project0.out diff --git a/boards/ek-tm4c123gxl/project0/ccs/macros.ini_initial b/boards/ek-tm4c123gxl/project0/ccs/macros.ini_initial new file mode 100644 index 0000000..31214b5 --- /dev/null +++ b/boards/ek-tm4c123gxl/project0/ccs/macros.ini_initial @@ -0,0 +1 @@ +SW_ROOT = ../../../../..
diff --git a/boards/ek-tm4c123gxl/project0/ccs/target_config.ccxml b/boards/ek-tm4c123gxl/project0/ccs/target_config.ccxml new file mode 100644 index 0000000..be4342a --- /dev/null +++ b/boards/ek-tm4c123gxl/project0/ccs/target_config.ccxml @@ -0,0 +1,13 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<configurations XML_version="1.2" id="configurations_0">
+ <configuration XML_version="1.2" id="Stellaris In-Circuit Debug Interface_0">
+ <instance XML_version="1.2" desc="Stellaris In-Circuit Debug Interface_0" href="connections/Stellaris_ICDI_Connection.xml" id="Stellaris In-Circuit Debug Interface_0" xml="Stellaris_ICDI_Connection.xml" xmlpath="connections"/>
+ <connection XML_version="1.2" id="Stellaris In-Circuit Debug Interface_0">
+ <instance XML_version="1.2" href="drivers/stellaris_cs_dap.xml" id="drivers" xml="stellaris_cs_dap.xml" xmlpath="drivers"/>
+ <instance XML_version="1.2" href="drivers/stellaris_cortex_m4.xml" id="drivers" xml="stellaris_cortex_m4.xml" xmlpath="drivers"/>
+ <platform XML_version="1.2" id="platform_0">
+ <instance XML_version="1.2" desc="Stellaris TM4C123GH6PM_0" href="devices/tm4c123gh6pm.xml" id="Stellaris TM4C123GH6PM_0" xml="tm4c123gh6pm.xml" xmlpath="devices"/>
+ </platform>
+ </connection>
+ </configuration>
+</configurations>
diff --git a/boards/ek-tm4c123gxl/project0/ewarm/Exe/project0.bin b/boards/ek-tm4c123gxl/project0/ewarm/Exe/project0.bin Binary files differnew file mode 100644 index 0000000..b87fd7c --- /dev/null +++ b/boards/ek-tm4c123gxl/project0/ewarm/Exe/project0.bin diff --git a/boards/ek-tm4c123gxl/project0/ewarm/Exe/project0.out b/boards/ek-tm4c123gxl/project0/ewarm/Exe/project0.out Binary files differnew file mode 100644 index 0000000..85974cc --- /dev/null +++ b/boards/ek-tm4c123gxl/project0/ewarm/Exe/project0.out diff --git a/boards/ek-tm4c123gxl/project0/gcc/project0.axf b/boards/ek-tm4c123gxl/project0/gcc/project0.axf Binary files differnew file mode 100644 index 0000000..32f8f1b --- /dev/null +++ b/boards/ek-tm4c123gxl/project0/gcc/project0.axf diff --git a/boards/ek-tm4c123gxl/project0/gcc/project0.bin b/boards/ek-tm4c123gxl/project0/gcc/project0.bin Binary files differnew file mode 100644 index 0000000..e55f653 --- /dev/null +++ b/boards/ek-tm4c123gxl/project0/gcc/project0.bin diff --git a/boards/ek-tm4c123gxl/project0/project0.c b/boards/ek-tm4c123gxl/project0/project0.c new file mode 100644 index 0000000..a0484c0 --- /dev/null +++ b/boards/ek-tm4c123gxl/project0/project0.c @@ -0,0 +1,114 @@ +//*****************************************************************************
+//
+// project0.c - Example to demonstrate minimal TivaWare setup
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "inc/hw_types.h"
+#include "inc/hw_memmap.h"
+#include "driverlib/sysctl.h"
+#include "driverlib/gpio.h"
+
+//*****************************************************************************
+//
+// Define pin to LED color mapping.
+//
+//*****************************************************************************
+
+//*****************************************************************************
+//
+//! \addtogroup example_list
+//! <h1>Project Zero (project0)</h1>
+//!
+//! This example demonstrates the use of TivaWare to setup the clocks and
+//! toggle GPIO pins to make the LED's blink. This is a good place to start
+//! understanding your launchpad and the tools that can be used to program it.
+//! See http://www.ti.com/tm4c123g-launchpad/project0 for more information and
+//! tutorial videos.
+//
+//*****************************************************************************
+
+#define RED_LED GPIO_PIN_1
+#define BLUE_LED GPIO_PIN_2
+#define GREEN_LED GPIO_PIN_3
+
+//*****************************************************************************
+//
+// The error routine that is called if the driver library encounters an error.
+//
+//*****************************************************************************
+#ifdef DEBUG
+void
+__error__(char *pcFilename, uint32_t ui32Line)
+{
+}
+#endif
+
+//*****************************************************************************
+//
+// Main 'C' Language entry point. Toggle an LED using TivaWare.
+// See http://www.ti.com/tm4c123g-launchpad/project0 for more information and
+// tutorial videos.
+//
+//*****************************************************************************
+int
+main(void)
+{
+ //
+ // Setup the system clock to run at 50 Mhz from PLL with crystal reference
+ //
+ SysCtlClockSet(SYSCTL_SYSDIV_4|SYSCTL_USE_PLL|SYSCTL_XTAL_16MHZ|
+ SYSCTL_OSC_MAIN);
+
+ //
+ // Enable and configure the GPIO port for the LED operation.
+ //
+ SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOF);
+ GPIOPinTypeGPIOOutput(GPIO_PORTF_BASE, RED_LED|BLUE_LED|GREEN_LED);
+
+ //
+ // Loop Forever
+ //
+ while(1)
+ {
+ //
+ // Turn on the LED
+ //
+ GPIOPinWrite(GPIO_PORTF_BASE, RED_LED|BLUE_LED|GREEN_LED, RED_LED);
+
+ //
+ // Delay for a bit
+ //
+ SysCtlDelay(2000000);
+
+ //
+ // Turn on the LED
+ //
+ GPIOPinWrite(GPIO_PORTF_BASE, RED_LED|BLUE_LED|GREEN_LED, BLUE_LED);
+
+ //
+ // Delay for a bit
+ //
+ SysCtlDelay(2000000);
+ }
+}
diff --git a/boards/ek-tm4c123gxl/project0/project0.ewd b/boards/ek-tm4c123gxl/project0/project0.ewd new file mode 100644 index 0000000..7a32408 --- /dev/null +++ b/boards/ek-tm4c123gxl/project0/project0.ewd @@ -0,0 +1,614 @@ +<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+ <fileVersion>1</fileVersion>
+ <configuration>
+ <name>Debug</name>
+ <toolchain>
+ <name>ARM</name>
+ </toolchain>
+ <debug>1</debug>
+ <settings>
+ <name>C-SPY</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>15</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CInput</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CEndian</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCVariant</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>MemOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MemFile</name>
+ <state>$TOOLKIT_DIR$\CONFIG\debugger\TexasInstruments\tm4c123gh6pm</state>
+ </option>
+ <option>
+ <name>RunToEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>RunToName</name>
+ <state>main</state>
+ </option>
+ <option>
+ <name>CExtraOptionsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCDDFArgumentProducer</name>
+ <state></state>
+ </option>
+ <option>
+ <name>OCDownloadSuppressDownload</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDownloadVerifyAll</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OCDynDriverList</name>
+ <state>LMIFTDI_ID</state>
+ </option>
+ <option>
+ <name>OCLastSavedByProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OCDownloadAttachToProgram</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FlashLoaders</name>
+ <state>,,,,(default),</state>
+ </option>
+ <option>
+ <name>UseFlashLoader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CLowLevel</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCBE8Slave</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ARMSIM_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCSimDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCSimEnablePSP</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCSimPspOverrideConfig</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCSimPspConfigFile</name>
+ <state></state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ANGEL_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CCAngelHeartbeat</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CAngelCommunication</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CAngelCommBaud</name>
+ <version>0</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>CAngelCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ANGELTCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoAngelLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AngelLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>GDBSERVER_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>TCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>LogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCJTagBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>IARROM_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CRomLogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomLogFileEditB</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CRomCommunication</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomCommBaud</name>
+ <version>0</version>
+ <state>7</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>JLINK_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>9</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>JLinkSpeed</name>
+ <state>32</state>
+ </option>
+ <option>
+ <name>CCJLinkDoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCJLinkHWResetDelay</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>JLinkInitialSpeed</name>
+ <state>32</state>
+ </option>
+ <option>
+ <name>CCDoJlinkMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCScanChainNonARMDevices</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkIRLength</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkCommRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkTCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>CCJLinkSpeedRadioV2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCUSBDevice</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchUndef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchSWI</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchData</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchPrefetch</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchIRQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchFIQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ <option>
+ <name>CCJLinkInterfaceRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCJLinkAttachSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCJLinkResetList</name>
+ <version>0</version>
+ <state>5</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>LMIFTDI_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>LmiftdiSpeed</name>
+ <state>500</state>
+ </option>
+ <option>
+ <name>CCLmiftdiDoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCLmiftdiLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>MACRAIGOR_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>2</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>jtag</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>EmuSpeed</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>TCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>LogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>DoEmuMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>EmuMultiTarget</name>
+ <state>0@ARM7TDMI</state>
+ </option>
+ <option>
+ <name>EmuHWReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CEmuCommBaud</name>
+ <version>0</version>
+ <state>4</state>
+ </option>
+ <option>
+ <name>CEmuCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>jtago</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>UnusedAddr</name>
+ <state>0x00800000</state>
+ </option>
+ <option>
+ <name>CCMacraigorHWResetDelay</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCJTagBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>RDI_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CRDIDriverDll</name>
+ <state>Browse to your RDI driver</state>
+ </option>
+ <option>
+ <name>CRDILogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRDILogFileEdit</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCRDIHWReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchUndef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchSWI</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchData</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchPrefetch</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchIRQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchFIQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDIUseETM</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>THIRDPARTY_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CThirdPartyDriverDll</name>
+ <state>Browse to your third-party driver</state>
+ </option>
+ <option>
+ <name>CThirdPartyLogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CThirdPartyLogFileEditB</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <debuggerPlugins>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\OSE\OseEpsilonPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Profiling\Profiling.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ </debuggerPlugins>
+ </configuration>
+</project>
diff --git a/boards/ek-tm4c123gxl/project0/project0.ewp b/boards/ek-tm4c123gxl/project0/project0.ewp new file mode 100644 index 0000000..71a4800 --- /dev/null +++ b/boards/ek-tm4c123gxl/project0/project0.ewp @@ -0,0 +1,786 @@ +<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+ <fileVersion>1</fileVersion>
+ <configuration>
+ <name>Debug</name>
+ <toolchain>
+ <name>ARM</name>
+ </toolchain>
+ <debug>1</debug>
+ <settings>
+ <name>General</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <version>14</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>ExePath</name>
+ <state>ewarm\Exe</state>
+ </option>
+ <option>
+ <name>ObjPath</name>
+ <state>ewarm\Obj</state>
+ </option>
+ <option>
+ <name>ListPath</name>
+ <state>ewarm\List</state>
+ </option>
+ <option>
+ <name>Variant</name>
+ <version>19</version>
+ <state>39</state>
+ </option>
+ <option>
+ <name>GEndianMode</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>Input variant</name>
+ <version>1</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>Input description</name>
+ <state>No specifier n, no float nor long long, no scan set, no assignment suppressing.</state>
+ </option>
+ <option>
+ <name>Output variant</name>
+ <version>0</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>Output description</name>
+ <state>No specifier a, A, no specifier n, no float nor long long, no flags.</state>
+ </option>
+ <option>
+ <name>GOutputBinary</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FPU</name>
+ <version>2</version>
+ <state>5</state>
+ </option>
+ <option>
+ <name>OGCoreOrChip</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelect</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelectSlave</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>RTDescription</name>
+ <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+ </option>
+ <option>
+ <name>RTConfigPath</name>
+ <state>$TOOLKIT_DIR$\INC\DLib_Config_Normal.h</state>
+ </option>
+ <option>
+ <name>OGProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OGLastSavedByProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>GeneralMisraRules</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>GeneralEnableMisra</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GeneralMisraVerbose</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGChipSelectEditMenu</name>
+ <state>TM4C123GH6PM TexasInstruments TM4C123GH6PM</state>
+ </option>
+ <option>
+ <name>GenLowLevelInterface</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GEndianModeBE</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OGBufferedTerminalOutput</name>
+ <state>0</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ICCARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>19</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CCDefines</name>
+ <state>ewarm</state>
+ <state>PART_TM4C123GH6PM</state>
+ <state>TARGET_IS_TM4C123_RB1</state>
+ </option>
+ <option>
+ <name>CCPreprocFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocComments</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMnemonics</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMessages</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssSource</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagSuppress</name>
+ <state>Pa050</state>
+ </option>
+ <option>
+ <name>CCDiagRemark</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCDiagWarning</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCDiagError</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCAllowList</name>
+ <version>1</version>
+ <state>1111111</state>
+ </option>
+ <option>
+ <name>CCDebugInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IEndianMode</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IExtraOptionsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCLangConformance</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCSignedPlainChar</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCRequirePrototypes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagWarnAreErr</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCCompilerRuntimeInfo</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OutputFile</name>
+ <state>$FILE_BNAME$.o</state>
+ </option>
+ <option>
+ <name>CCLangSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCLibConfigHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>PreInclude</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CompilerMisraRules</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>CompilerMisraOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCIncludePath2</name>
+ <state>$PROJ_DIR$\..</state>
+ <state>$PROJ_DIR$\..\..\..\..</state>
+ </option>
+ <option>
+ <name>CCStdIncCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCStdIncludePath</name>
+ <state>$TOOLKIT_DIR$\INC\</state>
+ </option>
+ <option>
+ <name>CCCodeSection</name>
+ <state>.text</state>
+ </option>
+ <option>
+ <name>IInterwork2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IProcessorMode2</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptLevel</name>
+ <state>3</state>
+ </option>
+ <option>
+ <name>CCOptStrategy</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptLevelSlave</name>
+ <state>3</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>AARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>7</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>AObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AEndian</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>ACaseSensitivity</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacroChars</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnEnable</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnWhat</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnOne</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AWarnRange1</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AWarnRange2</name>
+ <state></state>
+ </option>
+ <option>
+ <name>ADebug</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AltRegisterNames</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ADefines</name>
+ <state>ewarm</state>
+ </option>
+ <option>
+ <name>AList</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AListHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AListing</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>Includes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacDefs</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacExps</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacExec</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OnlyAssed</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MultiLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLengthCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLength</name>
+ <state>80</state>
+ </option>
+ <option>
+ <name>TabSpacing</name>
+ <state>8</state>
+ </option>
+ <option>
+ <name>AXRef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDefines</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefInternal</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDual</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AOutputFile</name>
+ <state>$FILE_BNAME$.o</state>
+ </option>
+ <option>
+ <name>AMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ALimitErrorsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ALimitErrorsEdit</name>
+ <state>100</state>
+ </option>
+ <option>
+ <name>AIgnoreStdInclude</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AStdIncludes</name>
+ <state>$TOOLKIT_DIR$\INC\</state>
+ </option>
+ <option>
+ <name>AUserIncludes</name>
+ <state>$PROJ_DIR$\..</state>
+ <state>$PROJ_DIR$\..\..\..\..</state>
+ </option>
+ <option>
+ <name>AExtraOptionsCheckV2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AExtraOptionsV2</name>
+ <state></state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>OBJCOPY</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OOCOutputFormat</name>
+ <version>1</version>
+ <state>2</state>
+ </option>
+ <option>
+ <name>OCOutputOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OOCOutputFile</name>
+ <state>project0.bin</state>
+ </option>
+ <option>
+ <name>OOCCommandLineProducer</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OOCObjCopyEnable</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>CUSTOM</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <extensions></extensions>
+ <cmdline></cmdline>
+ </data>
+ </settings>
+ <settings>
+ <name>BICOMP</name>
+ <archiveVersion>0</archiveVersion>
+ <data/>
+ </settings>
+ <settings>
+ <name>BUILDACTION</name>
+ <archiveVersion>1</archiveVersion>
+ <data>
+ <prebuild></prebuild>
+ <postbuild></postbuild>
+ </data>
+ </settings>
+ <settings>
+ <name>ILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>5</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>IlinkLibIOConfig</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>XLinkMisraHandler</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkInputFileSlave</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkOutputFile</name>
+ <state>project0.out</state>
+ </option>
+ <option>
+ <name>IlinkDebugInfoEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkKeepSymbols</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinaryFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinarySymbol</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinarySegment</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinaryAlign</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkDefines</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkConfigDefines</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkMapFile</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkLogFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogInitialization</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogModule</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogSection</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogVeneer</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkIcfOverride</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkIcfFile</name>
+ <state>$PROJ_DIR$\project0.icf</state>
+ </option>
+ <option>
+ <name>IlinkIcfFileSlave</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkSuppressDiags</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsRem</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsWarn</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsErr</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkWarningsAreErrors</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkUseExtraOptions</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkLowLevelInterfaceSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAutoLibEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAdditionalLibs</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkOverrideProgramEntryLabel</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabelSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabel</name>
+ <state>__iar_program_start</state>
+ </option>
+ <option>
+ <name>IlinkNXPLPCChecksum</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>DoFill</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FillerByte</name>
+ <state>0xFF</state>
+ </option>
+ <option>
+ <name>FillerStart</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>FillerEnd</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>CrcSize</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcAlign</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcAlgo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcPoly</name>
+ <state>0x11021</state>
+ </option>
+ <option>
+ <name>CrcCompl</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcBitOrder</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcInitialValue</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>DoCrc</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkBE8Slave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkBufferedTerminalOutput</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>IARCHIVE</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>IarchiveInputs</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IarchiveOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IarchiveOutput</name>
+ <state>###Unitialized###</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>BILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data/>
+ </settings>
+ </configuration>
+ <group>
+ <name>Libraries</name>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\driverlib\ewarm\Exe\driverlib.a</name>
+ </file>
+ </group>
+ <group>
+ <name>Source</name>
+ <file>
+ <name>$PROJ_DIR$\project0.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\startup_ewarm.c</name>
+ </file>
+ </group>
+</project>
diff --git a/boards/ek-tm4c123gxl/project0/project0.icf b/boards/ek-tm4c123gxl/project0/project0.icf new file mode 100644 index 0000000..8ee0e1d --- /dev/null +++ b/boards/ek-tm4c123gxl/project0/project0.icf @@ -0,0 +1,78 @@ +//*****************************************************************************
+//
+// project0.icf - Linker configuration file for project0.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+//
+// Define a memory region that covers the entire 4 GB addressible space of the
+// processor.
+//
+define memory mem with size = 4G;
+
+//
+// Define a region for the on-chip flash.
+//
+define region FLASH = mem:[from 0x00000000 to 0x0003ffff];
+
+//
+// Define a region for the on-chip SRAM.
+//
+define region SRAM = mem:[from 0x20000000 to 0x20007fff];
+
+//
+// Define a block for the heap. The size should be set to something other
+// than zero if things in the C library that require the heap are used.
+//
+define block HEAP with alignment = 8, size = 0x00000000 { };
+
+//
+// Indicate that the read/write values should be initialized by copying from
+// flash.
+//
+initialize by copy { readwrite };
+
+//
+// Indicate that the noinit values should be left alone. This includes the
+// stack, which if initialized will destroy the return address from the
+// initialization code, causing the processor to branch to zero and fault.
+//
+do not initialize { section .noinit };
+
+//
+// Place the interrupt vectors at the start of flash.
+//
+place at start of FLASH { readonly section .intvec };
+
+//
+// Place the remainder of the read-only items into flash.
+//
+place in FLASH { readonly };
+
+//
+// Place the RAM vector table at the start of SRAM.
+//
+place at start of SRAM { section VTABLE };
+
+//
+// Place all read/write items into SRAM.
+//
+place in SRAM { readwrite, block HEAP };
diff --git a/boards/ek-tm4c123gxl/project0/project0.ld b/boards/ek-tm4c123gxl/project0/project0.ld new file mode 100644 index 0000000..9063248 --- /dev/null +++ b/boards/ek-tm4c123gxl/project0/project0.ld @@ -0,0 +1,57 @@ +/******************************************************************************
+ *
+ * project0.ld - Linker configuration file for project0.
+ *
+ * Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+ * Software License Agreement
+ *
+ * Texas Instruments (TI) is supplying this software for use solely and
+ * exclusively on TI's microcontroller products. The software is owned by
+ * TI and/or its suppliers, and is protected under applicable copyright
+ * laws. You may not combine this software with "viral" open-source
+ * software in order to form a larger program.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+ * NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+ * NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+ * CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+ * DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ * This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+ *
+ *****************************************************************************/
+
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x00040000
+ SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000
+}
+
+SECTIONS
+{
+ .text :
+ {
+ _text = .;
+ KEEP(*(.isr_vector))
+ *(.text*)
+ *(.rodata*)
+ _etext = .;
+ } > FLASH
+
+ .data : AT(ADDR(.text) + SIZEOF(.text))
+ {
+ _data = .;
+ *(vtable)
+ *(.data*)
+ _edata = .;
+ } > SRAM
+
+ .bss :
+ {
+ _bss = .;
+ *(.bss*)
+ *(COMMON)
+ _ebss = .;
+ } > SRAM
+}
diff --git a/boards/ek-tm4c123gxl/project0/project0.sct b/boards/ek-tm4c123gxl/project0/project0.sct new file mode 100644 index 0000000..b742201 --- /dev/null +++ b/boards/ek-tm4c123gxl/project0/project0.sct @@ -0,0 +1,47 @@ +;******************************************************************************
+;
+; project0.sct - Linker configuration file for project0.
+;
+; Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+; Software License Agreement
+;
+; Texas Instruments (TI) is supplying this software for use solely and
+; exclusively on TI's microcontroller products. The software is owned by
+; TI and/or its suppliers, and is protected under applicable copyright
+; laws. You may not combine this software with "viral" open-source
+; software in order to form a larger program.
+;
+; THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+; NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+; NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+; A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+; CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+; DAMAGES, FOR ANY REASON WHATSOEVER.
+;
+; This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+;
+;******************************************************************************
+
+LR_IROM 0x00000000 0x00040000
+{
+ ;
+ ; Specify the Execution Address of the code and the size.
+ ;
+ ER_IROM 0x00000000 0x00040000
+ {
+ *.o (RESET, +First)
+ * (InRoot$$Sections, +RO)
+ }
+
+ ;
+ ; Specify the Execution Address of the data area.
+ ;
+ RW_IRAM 0x20000000 0x00008000
+ {
+ ;
+ ; Uncomment the following line in order to use IntRegister().
+ ;
+ ;* (vtable, +First)
+ * (+RW, +ZI)
+ }
+}
diff --git a/boards/ek-tm4c123gxl/project0/project0.uvopt b/boards/ek-tm4c123gxl/project0/project0.uvopt new file mode 100644 index 0000000..cfc26a8 --- /dev/null +++ b/boards/ek-tm4c123gxl/project0/project0.uvopt @@ -0,0 +1,289 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+ <SchemaVersion>1.0</SchemaVersion>
+
+ <Header>### uVision Project, (C) Keil Software</Header>
+
+ <Extensions>
+ <cExt>*.c</cExt>
+ <aExt>*.s*; *.src; *.a*</aExt>
+ <oExt>*.obj</oExt>
+ <lExt>*.lib</lExt>
+ <tExt>*.txt; *.h; *.inc</tExt>
+ <pExt>*.plm</pExt>
+ <CppX>*.cpp</CppX>
+ </Extensions>
+
+ <DaveTm>
+ <dwLowDateTime>0</dwLowDateTime>
+ <dwHighDateTime>0</dwHighDateTime>
+ </DaveTm>
+
+ <Target>
+ <TargetName>project0</TargetName>
+ <ToolsetNumber>0x4</ToolsetNumber>
+ <ToolsetName>ARM-ADS</ToolsetName>
+ <TargetOption>
+ <CLKADS>8000000</CLKADS>
+ <OPTTT>
+ <gFlags>1</gFlags>
+ <BeepAtEnd>1</BeepAtEnd>
+ <RunSim>1</RunSim>
+ <RunTarget>0</RunTarget>
+ </OPTTT>
+ <OPTHX>
+ <HexSelection>1</HexSelection>
+ <FlashByte>65535</FlashByte>
+ <HexRangeLowAddress>0</HexRangeLowAddress>
+ <HexRangeHighAddress>0</HexRangeHighAddress>
+ <HexOffset>0</HexOffset>
+ </OPTHX>
+ <OPTLEX>
+ <PageWidth>79</PageWidth>
+ <PageLength>66</PageLength>
+ <TabStop>8</TabStop>
+ <ListingPath>.\rvmdk\</ListingPath>
+ </OPTLEX>
+ <ListingPage>
+ <CreateCListing>1</CreateCListing>
+ <CreateAListing>1</CreateAListing>
+ <CreateLListing>1</CreateLListing>
+ <CreateIListing>0</CreateIListing>
+ <AsmCond>1</AsmCond>
+ <AsmSymb>1</AsmSymb>
+ <AsmXref>0</AsmXref>
+ <CCond>1</CCond>
+ <CCode>0</CCode>
+ <CListInc>0</CListInc>
+ <CSymb>0</CSymb>
+ <LinkerCodeListing>0</LinkerCodeListing>
+ </ListingPage>
+ <OPTXL>
+ <LMap>1</LMap>
+ <LComments>1</LComments>
+ <LGenerateSymbols>1</LGenerateSymbols>
+ <LLibSym>1</LLibSym>
+ <LLines>1</LLines>
+ <LLocSym>1</LLocSym>
+ <LPubSym>1</LPubSym>
+ <LXref>0</LXref>
+ <LExpSel>0</LExpSel>
+ </OPTXL>
+ <OPTFL>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <IsCurrentTarget>1</IsCurrentTarget>
+ </OPTFL>
+ <CpuCode>255</CpuCode>
+ <Books>
+ <Book>
+ <Number>0</Number>
+ <Title>Data Sheet</Title>
+ <Path>DATASHTS\Luminary\TM4C123GH6PM.PDF</Path>
+ </Book>
+ </Books>
+ <DllOpt>
+ <SimDllName>SARMCM3.DLL</SimDllName>
+ <SimDllArguments>-MPU</SimDllArguments>
+ <SimDlgDllName>DCM.DLL</SimDlgDllName>
+ <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+ <TargetDllName>SARMCM3.DLL</TargetDllName>
+ <TargetDllArguments>-MPU</TargetDllArguments>
+ <TargetDlgDllName>TCM.DLL</TargetDlgDllName>
+ <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+ </DllOpt>
+ <DebugOpt>
+ <uSim>0</uSim>
+ <uTrg>1</uTrg>
+ <sLdApp>1</sLdApp>
+ <sGomain>1</sGomain>
+ <sRbreak>1</sRbreak>
+ <sRwatch>1</sRwatch>
+ <sRmem>1</sRmem>
+ <sRfunc>1</sRfunc>
+ <sRbox>1</sRbox>
+ <tLdApp>1</tLdApp>
+ <tGomain>0</tGomain>
+ <tRbreak>1</tRbreak>
+ <tRwatch>1</tRwatch>
+ <tRmem>1</tRmem>
+ <tRfunc>0</tRfunc>
+ <tRbox>1</tRbox>
+ <sRunDeb>0</sRunDeb>
+ <sLrtime>0</sLrtime>
+ <nTsel>4</nTsel>
+ <sDll></sDll>
+ <sDllPa></sDllPa>
+ <sDlgDll></sDlgDll>
+ <sDlgPa></sDlgPa>
+ <sIfile></sIfile>
+ <tDll></tDll>
+ <tDllPa></tDllPa>
+ <tDlgDll></tDlgDll>
+ <tDlgPa></tDlgPa>
+ <tIfile></tIfile>
+ <pMon>BIN\lmidk-agdi.dll</pMon>
+ </DebugOpt>
+ <TargetDriverDllRegistry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>lmidk-agdi</Key>
+ <Name>-O4614 -S3 -FO29</Name>
+ </SetRegEntry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>DLGTARM</Key>
+ <Name></Name>
+ </SetRegEntry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>ARMDBGFLAGS</Key>
+ <Name></Name>
+ </SetRegEntry>
+ </TargetDriverDllRegistry>
+ <DebugFlag>
+ <trace>0</trace>
+ <periodic>1</periodic>
+ <aLwin>0</aLwin>
+ <aCover>0</aCover>
+ <aSer1>0</aSer1>
+ <aSer2>0</aSer2>
+ <aPa>0</aPa>
+ <viewmode>1</viewmode>
+ <vrSel>0</vrSel>
+ <aSym>0</aSym>
+ <aTbox>0</aTbox>
+ <AscS1>0</AscS1>
+ <AscS2>0</AscS2>
+ <AscS3>0</AscS3>
+ <aSer3>0</aSer3>
+ <eProf>0</eProf>
+ <aLa>0</aLa>
+ <aPa1>0</aPa1>
+ <AscS4>0</AscS4>
+ <aSer4>0</aSer4>
+ <StkLoc>0</StkLoc>
+ <TrcWin>0</TrcWin>
+ <newCpu>0</newCpu>
+ <uProt>0</uProt>
+ </DebugFlag>
+ <LintExecutable></LintExecutable>
+ <LintConfigFile></LintConfigFile>
+ </TargetOption>
+ </Target>
+
+ <Group>
+ <GroupName>Source</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>1</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\project0.c</PathWithFileName>
+ <FilenameWithoutPath>project0.c</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>2</FileNumber>
+ <FileType>2</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\startup_rvmdk.S</PathWithFileName>
+ <FilenameWithoutPath>startup_rvmdk.S</FilenameWithoutPath>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>Libraries</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>3</FileNumber>
+ <FileType>4</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\driverlib\rvmdk\driverlib.lib</PathWithFileName>
+ <FilenameWithoutPath>driverlib.lib</FilenameWithoutPath>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>Documentation</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>3</GroupNumber>
+ <FileNumber>4</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <Focus>1</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>1</TopLine>
+ <CurrentLine>1</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\readme.txt</PathWithFileName>
+ <FilenameWithoutPath>readme.txt</FilenameWithoutPath>
+ <WindowPosition>
+ <length>44</length>
+ <flags>0</flags>
+ <showCmd>1</showCmd>
+ <MinPosition>
+ <xPos>-1</xPos>
+ <yPos>-1</yPos>
+ </MinPosition>
+ <MaxPosition>
+ <xPos>-1</xPos>
+ <yPos>-1</yPos>
+ </MaxPosition>
+ <NormalPosition>
+ <Top>0</Top>
+ <Left>0</Left>
+ <Right>729</Right>
+ <Bottom>300</Bottom>
+ </NormalPosition>
+ </WindowPosition>
+ </File>
+ </Group>
+
+ <MDIGroups>
+ <Orientation>1</Orientation>
+ <ActiveMDIGroup>0</ActiveMDIGroup>
+ <MDIGroup>
+ <Size>100</Size>
+ <ActiveTab>0</ActiveTab>
+ <Documents>
+ <Doc>
+ <Name>.\readme.txt</Name>
+ <ColumnNumber>0</ColumnNumber>
+ <TopLine>1</TopLine>
+ <CurrentLine>1</CurrentLine>
+ </Doc>
+ </Documents>
+ </MDIGroup>
+ </MDIGroups>
+
+</ProjectOpt>
diff --git a/boards/ek-tm4c123gxl/project0/project0.uvproj b/boards/ek-tm4c123gxl/project0/project0.uvproj new file mode 100644 index 0000000..ed7b4d9 --- /dev/null +++ b/boards/ek-tm4c123gxl/project0/project0.uvproj @@ -0,0 +1,424 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+ <SchemaVersion>1.1</SchemaVersion>
+
+ <Header>### uVision Project, (C) Keil Software</Header>
+
+ <Targets>
+ <Target>
+ <TargetName>project0</TargetName>
+ <ToolsetNumber>0x4</ToolsetNumber>
+ <ToolsetName>ARM-ADS</ToolsetName>
+ <TargetOption>
+ <TargetCommonOption>
+ <Device>TM4C123GH6PM</Device>
+ <Vendor>Texas Instruments</Vendor>
+ <Cpu>IRAM(0x20000000-0x20007FFF) IROM(0-0x3FFFF) CLOCK(8000000) CPUTYPE("Cortex-M4") FPU2</Cpu>
+ <FlashUtilSpec></FlashUtilSpec>
+ <StartupFile>"STARTUP\Luminary\Startup.s" ("Luminary Startup Code")</StartupFile>
+ <FlashDriverDll>UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0LM4F_256 -FS00 -FL040000)</FlashDriverDll>
+ <DeviceId>5919</DeviceId>
+ <RegisterFile>LM4Fxxxx.H</RegisterFile>
+ <MemoryEnv></MemoryEnv>
+ <Cmp></Cmp>
+ <Asm></Asm>
+ <Linker></Linker>
+ <OHString></OHString>
+ <InfinionOptionDll></InfinionOptionDll>
+ <SLE66CMisc></SLE66CMisc>
+ <SLE66AMisc></SLE66AMisc>
+ <SLE66LinkerMisc></SLE66LinkerMisc>
+ <UseEnv>0</UseEnv>
+ <BinPath></BinPath>
+ <IncludePath></IncludePath>
+ <LibPath></LibPath>
+ <RegisterFilePath>Luminary\</RegisterFilePath>
+ <DBRegisterFilePath>Luminary\</DBRegisterFilePath>
+ <TargetStatus>
+ <Error>0</Error>
+ <ExitCodeStop>0</ExitCodeStop>
+ <ButtonStop>0</ButtonStop>
+ <NotGenerated>0</NotGenerated>
+ <InvalidFlash>1</InvalidFlash>
+ </TargetStatus>
+ <OutputDirectory>.\rvmdk\</OutputDirectory>
+ <OutputName>project0</OutputName>
+ <CreateExecutable>1</CreateExecutable>
+ <CreateLib>0</CreateLib>
+ <CreateHexFile>0</CreateHexFile>
+ <DebugInformation>1</DebugInformation>
+ <BrowseInformation>1</BrowseInformation>
+ <ListingPath>.\rvmdk\</ListingPath>
+ <HexFormatSelection>1</HexFormatSelection>
+ <Merge32K>0</Merge32K>
+ <CreateBatchFile>0</CreateBatchFile>
+ <BeforeCompile>
+ <RunUserProg1>0</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name></UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </BeforeCompile>
+ <BeforeMake>
+ <RunUserProg1>0</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name></UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </BeforeMake>
+ <AfterMake>
+ <RunUserProg1>1</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name>fromelf --bin --output .\rvmdk\project0.bin .\rvmdk\project0.axf</UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </AfterMake>
+ <SelectedForBatchBuild>0</SelectedForBatchBuild>
+ <SVCSIdString></SVCSIdString>
+ </TargetCommonOption>
+ <CommonProperty>
+ <UseCPPCompiler>0</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <DllOption>
+ <SimDllName>SARMCM3.DLL</SimDllName>
+ <SimDllArguments>-MPU</SimDllArguments>
+ <SimDlgDll>DCM.DLL</SimDlgDll>
+ <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+ <TargetDllName>SARMCM3.DLL</TargetDllName>
+ <TargetDllArguments>-MPU</TargetDllArguments>
+ <TargetDlgDll>TCM.DLL</TargetDlgDll>
+ <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+ </DllOption>
+ <DebugOption>
+ <OPTHX>
+ <HexSelection>1</HexSelection>
+ <HexRangeLowAddress>0</HexRangeLowAddress>
+ <HexRangeHighAddress>0</HexRangeHighAddress>
+ <HexOffset>0</HexOffset>
+ <Oh166RecLen>16</Oh166RecLen>
+ </OPTHX>
+ <Simulator>
+ <UseSimulator>0</UseSimulator>
+ <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+ <RunToMain>1</RunToMain>
+ <RestoreBreakpoints>1</RestoreBreakpoints>
+ <RestoreWatchpoints>1</RestoreWatchpoints>
+ <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+ <RestoreFunctions>1</RestoreFunctions>
+ <RestoreToolbox>1</RestoreToolbox>
+ <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+ </Simulator>
+ <Target>
+ <UseTarget>1</UseTarget>
+ <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+ <RunToMain>0</RunToMain>
+ <RestoreBreakpoints>1</RestoreBreakpoints>
+ <RestoreWatchpoints>1</RestoreWatchpoints>
+ <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+ <RestoreFunctions>0</RestoreFunctions>
+ <RestoreToolbox>1</RestoreToolbox>
+ </Target>
+ <RunDebugAfterBuild>0</RunDebugAfterBuild>
+ <TargetSelection>4</TargetSelection>
+ <SimDlls>
+ <CpuDll></CpuDll>
+ <CpuDllArguments></CpuDllArguments>
+ <PeripheralDll></PeripheralDll>
+ <PeripheralDllArguments></PeripheralDllArguments>
+ <InitializationFile></InitializationFile>
+ </SimDlls>
+ <TargetDlls>
+ <CpuDll></CpuDll>
+ <CpuDllArguments></CpuDllArguments>
+ <PeripheralDll></PeripheralDll>
+ <PeripheralDllArguments></PeripheralDllArguments>
+ <InitializationFile></InitializationFile>
+ <Driver>BIN\lmidk-agdi.dll</Driver>
+ </TargetDlls>
+ </DebugOption>
+ <Utilities>
+ <Flash1>
+ <UseTargetDll>1</UseTargetDll>
+ <UseExternalTool>0</UseExternalTool>
+ <RunIndependent>0</RunIndependent>
+ <UpdateFlashBeforeDebugging>0</UpdateFlashBeforeDebugging>
+ <Capability>1</Capability>
+ <DriverSelection>4099</DriverSelection>
+ </Flash1>
+ <Flash2>BIN\lmidk-agdi.dll</Flash2>
+ <Flash3></Flash3>
+ <Flash4></Flash4>
+ </Utilities>
+ <TargetArmAds>
+ <ArmAdsMisc>
+ <GenerateListings>0</GenerateListings>
+ <asHll>1</asHll>
+ <asAsm>1</asAsm>
+ <asMacX>1</asMacX>
+ <asSyms>1</asSyms>
+ <asFals>1</asFals>
+ <asDbgD>1</asDbgD>
+ <asForm>1</asForm>
+ <ldLst>0</ldLst>
+ <ldmm>1</ldmm>
+ <ldXref>1</ldXref>
+ <BigEnd>0</BigEnd>
+ <AdsALst>0</AdsALst>
+ <AdsACrf>0</AdsACrf>
+ <AdsANop>0</AdsANop>
+ <AdsANot>0</AdsANot>
+ <AdsLLst>1</AdsLLst>
+ <AdsLmap>1</AdsLmap>
+ <AdsLcgr>1</AdsLcgr>
+ <AdsLsym>1</AdsLsym>
+ <AdsLszi>1</AdsLszi>
+ <AdsLtoi>1</AdsLtoi>
+ <AdsLsun>1</AdsLsun>
+ <AdsLven>1</AdsLven>
+ <AdsLsxf>1</AdsLsxf>
+ <RvctClst>0</RvctClst>
+ <GenPPlst>0</GenPPlst>
+ <AdsCpuType>"Cortex-M4"</AdsCpuType>
+ <RvctDeviceName></RvctDeviceName>
+ <mOS>0</mOS>
+ <uocRom>0</uocRom>
+ <uocRam>0</uocRam>
+ <hadIROM>1</hadIROM>
+ <hadIRAM>1</hadIRAM>
+ <hadXRAM>0</hadXRAM>
+ <uocXRam>0</uocXRam>
+ <RvdsVP>2</RvdsVP>
+ <hadIRAM2>0</hadIRAM2>
+ <hadIROM2>0</hadIROM2>
+ <StupSel>8</StupSel>
+ <useUlib>1</useUlib>
+ <EndSel>0</EndSel>
+ <uLtcg>0</uLtcg>
+ <RoSelD>3</RoSelD>
+ <RwSelD>3</RwSelD>
+ <CodeSel>0</CodeSel>
+ <OptFeed>0</OptFeed>
+ <NoZi1>0</NoZi1>
+ <NoZi2>0</NoZi2>
+ <NoZi3>0</NoZi3>
+ <NoZi4>0</NoZi4>
+ <NoZi5>0</NoZi5>
+ <Ro1Chk>0</Ro1Chk>
+ <Ro2Chk>0</Ro2Chk>
+ <Ro3Chk>0</Ro3Chk>
+ <Ir1Chk>1</Ir1Chk>
+ <Ir2Chk>0</Ir2Chk>
+ <Ra1Chk>0</Ra1Chk>
+ <Ra2Chk>0</Ra2Chk>
+ <Ra3Chk>0</Ra3Chk>
+ <Im1Chk>1</Im1Chk>
+ <Im2Chk>0</Im2Chk>
+ <OnChipMemories>
+ <Ocm1>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm1>
+ <Ocm2>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm2>
+ <Ocm3>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm3>
+ <Ocm4>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm4>
+ <Ocm5>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm5>
+ <Ocm6>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm6>
+ <IRAM>
+ <Type>0</Type>
+ <StartAddress>0x20000000</StartAddress>
+ <Size>0x8000</Size>
+ </IRAM>
+ <IROM>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x40000</Size>
+ </IROM>
+ <XRAM>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </XRAM>
+ <OCR_RVCT1>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT1>
+ <OCR_RVCT2>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT2>
+ <OCR_RVCT3>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT3>
+ <OCR_RVCT4>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x40000</Size>
+ </OCR_RVCT4>
+ <OCR_RVCT5>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT5>
+ <OCR_RVCT6>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT6>
+ <OCR_RVCT7>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT7>
+ <OCR_RVCT8>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT8>
+ <OCR_RVCT9>
+ <Type>0</Type>
+ <StartAddress>0x20000000</StartAddress>
+ <Size>0x8000</Size>
+ </OCR_RVCT9>
+ <OCR_RVCT10>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT10>
+ </OnChipMemories>
+ <RvctStartVector></RvctStartVector>
+ </ArmAdsMisc>
+ <Cads>
+ <interw>0</interw>
+ <Optim>3</Optim>
+ <oTime>0</oTime>
+ <SplitLS>0</SplitLS>
+ <OneElfS>1</OneElfS>
+ <Strict>0</Strict>
+ <EnumInt>0</EnumInt>
+ <PlainCh>0</PlainCh>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <wLevel>2</wLevel>
+ <uThumb>0</uThumb>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define>rvmdk PART_TM4C123GH6PM TARGET_IS_TM4C123_RB1</Define>
+ <Undefine></Undefine>
+ <IncludePath>..;..\..\..\..;</IncludePath>
+ </VariousControls>
+ </Cads>
+ <Aads>
+ <interw>1</interw>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <thumb>0</thumb>
+ <SplitLS>0</SplitLS>
+ <SwStkChk>0</SwStkChk>
+ <NoWarn>0</NoWarn>
+ <VariousControls>
+ <MiscControls></MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Aads>
+ <LDads>
+ <umfTarg>0</umfTarg>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <noStLib>0</noStLib>
+ <RepFail>1</RepFail>
+ <useFile>0</useFile>
+ <TextAddressRange>0x00000000</TextAddressRange>
+ <DataAddressRange>0x20000000</DataAddressRange>
+ <ScatterFile>project0.sct</ScatterFile>
+ <IncludeLibs></IncludeLibs>
+ <IncludeLibsPath></IncludeLibsPath>
+ <Misc>--entry Reset_Handler</Misc>
+ <LinkerInputFile></LinkerInputFile>
+ <DisabledWarnings></DisabledWarnings>
+ </LDads>
+ </TargetArmAds>
+ </TargetOption>
+ <Groups>
+ <Group>
+ <GroupName>Source</GroupName>
+ <Files>
+ <File>
+ <FileName>project0.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>.\project0.c</FilePath>
+ </File>
+ <File>
+ <FileName>startup_rvmdk.S</FileName>
+ <FileType>2</FileType>
+ <FilePath>.\startup_rvmdk.S</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>Libraries</GroupName>
+ <Files>
+ <File>
+ <FileName>driverlib.lib</FileName>
+ <FileType>4</FileType>
+ <FilePath>..\..\..\..\driverlib\rvmdk\driverlib.lib</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>Documentation</GroupName>
+ <Files>
+ <File>
+ <FileName>readme.txt</FileName>
+ <FileType>5</FileType>
+ <FilePath>.\readme.txt</FilePath>
+ </File>
+ </Files>
+ </Group>
+ </Groups>
+ </Target>
+ </Targets>
+
+</Project>
diff --git a/boards/ek-tm4c123gxl/project0/project0_ccs.cmd b/boards/ek-tm4c123gxl/project0/project0_ccs.cmd new file mode 100644 index 0000000..1635d17 --- /dev/null +++ b/boards/ek-tm4c123gxl/project0/project0_ccs.cmd @@ -0,0 +1,70 @@ +/******************************************************************************
+ *
+ * project0_ccs.cmd - CCS linker configuration file for project0.
+ *
+ * Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+ * Software License Agreement
+ *
+ * Texas Instruments (TI) is supplying this software for use solely and
+ * exclusively on TI's microcontroller products. The software is owned by
+ * TI and/or its suppliers, and is protected under applicable copyright
+ * laws. You may not combine this software with "viral" open-source
+ * software in order to form a larger program.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+ * NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+ * NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+ * CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+ * DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ * This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+ *
+ *****************************************************************************/
+
+--retain=g_pfnVectors
+
+/* The following command line options are set as part of the CCS project. */
+/* If you are building using the command line, or for some reason want to */
+/* define them here, you can uncomment and modify these lines as needed. */
+/* If you are using CCS for building, it is probably better to make any such */
+/* modifications in your CCS project and leave this file alone. */
+/* */
+/* --heap_size=0 */
+/* --stack_size=256 */
+/* --library=rtsv7M3_T_le_eabi.lib */
+
+/* The starting address of the application. Normally the interrupt vectors */
+/* must be located at the beginning of the application. */
+#define APP_BASE 0x00000000
+#define RAM_BASE 0x20000000
+
+/* System memory map */
+
+MEMORY
+{
+ /* Application stored in and executes from internal flash */
+ FLASH (RX) : origin = APP_BASE, length = 0x00040000
+ /* Application uses internal RAM for data */
+ SRAM (RWX) : origin = 0x20000000, length = 0x00008000
+}
+
+/* Section allocation in memory */
+
+SECTIONS
+{
+ .intvecs: > APP_BASE
+ .text : > FLASH
+ .const : > FLASH
+ .cinit : > FLASH
+ .pinit : > FLASH
+ .init_array : > FLASH
+
+ .vtable : > RAM_BASE
+ .data : > SRAM
+ .bss : > SRAM
+ .sysmem : > SRAM
+ .stack : > SRAM
+}
+
+__STACK_TOP = __stack + 256;
diff --git a/boards/ek-tm4c123gxl/project0/readme.txt b/boards/ek-tm4c123gxl/project0/readme.txt new file mode 100644 index 0000000..63d9870 --- /dev/null +++ b/boards/ek-tm4c123gxl/project0/readme.txt @@ -0,0 +1,27 @@ +Project Zero
+
+This example demonstrates the use of TivaWare to setup the clocks and
+toggle GPIO pins to make the LED's blink. This is a good place to start
+understanding your launchpad and the tools that can be used to program it.
+See http://www.ti.com/tm4c123g-launchpad/project0 for more information and
+tutorial videos.
+
+-------------------------------------------------------------------------------
+
+Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+Software License Agreement
+
+Texas Instruments (TI) is supplying this software for use solely and
+exclusively on TI's microcontroller products. The software is owned by
+TI and/or its suppliers, and is protected under applicable copyright
+laws. You may not combine this software with "viral" open-source
+software in order to form a larger program.
+
+THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+DAMAGES, FOR ANY REASON WHATSOEVER.
+
+This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
diff --git a/boards/ek-tm4c123gxl/project0/rvmdk/project0.axf b/boards/ek-tm4c123gxl/project0/rvmdk/project0.axf Binary files differnew file mode 100644 index 0000000..25ee206 --- /dev/null +++ b/boards/ek-tm4c123gxl/project0/rvmdk/project0.axf diff --git a/boards/ek-tm4c123gxl/project0/rvmdk/project0.bin b/boards/ek-tm4c123gxl/project0/rvmdk/project0.bin Binary files differnew file mode 100644 index 0000000..ab12a0a --- /dev/null +++ b/boards/ek-tm4c123gxl/project0/rvmdk/project0.bin diff --git a/boards/ek-tm4c123gxl/project0/startup_ccs.c b/boards/ek-tm4c123gxl/project0/startup_ccs.c new file mode 100644 index 0000000..ca18035 --- /dev/null +++ b/boards/ek-tm4c123gxl/project0/startup_ccs.c @@ -0,0 +1,295 @@ +//*****************************************************************************
+//
+// startup_ccs.c - Startup code for use with TI's Code Composer Studio.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// External declaration for the reset handler that is to be called when the
+// processor is started
+//
+//*****************************************************************************
+extern void _c_int00(void);
+
+//*****************************************************************************
+//
+// Linker variable that marks the top of the stack.
+//
+//*****************************************************************************
+extern uint32_t __STACK_TOP;
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000 or at the start of
+// the program if located at a start address other than 0.
+//
+//*****************************************************************************
+#pragma DATA_SECTION(g_pfnVectors, ".intvecs")
+void (* const g_pfnVectors[])(void) =
+{
+ (void (*)(void))((uint32_t)&__STACK_TOP),
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ IntDefaultHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ IntDefaultHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ IntDefaultHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ //
+ // Jump to the CCS C initialization routine. This will enable the
+ // floating-point unit as well, so that does not need to be done here.
+ //
+ __asm(" .global _c_int00\n"
+ " b.w _c_int00");
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/project0/startup_ewarm.c b/boards/ek-tm4c123gxl/project0/startup_ewarm.c new file mode 100644 index 0000000..ed44e2d --- /dev/null +++ b/boards/ek-tm4c123gxl/project0/startup_ewarm.c @@ -0,0 +1,326 @@ +//*****************************************************************************
+//
+// startup_ewarm.c - Startup code for use with IAR's Embedded Workbench,
+// version 5.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Enable the IAR extensions for this source file.
+//
+//*****************************************************************************
+#pragma language=extended
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// The entry point for the application startup code.
+//
+//*****************************************************************************
+extern void __iar_program_start(void);
+
+//*****************************************************************************
+//
+// Reserve space for the system stack.
+//
+//*****************************************************************************
+static uint32_t pui32Stack[64] @ ".noinit";
+
+//*****************************************************************************
+//
+// A union that describes the entries of the vector table. The union is needed
+// since the first entry is the stack pointer and the remainder are function
+// pointers.
+//
+//*****************************************************************************
+typedef union
+{
+ void (*pfnHandler)(void);
+ uint32_t ui32Ptr;
+}
+uVectorEntry;
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000.
+//
+//*****************************************************************************
+__root const uVectorEntry __vector_table[] @ ".intvec" =
+{
+ { .ui32Ptr = (uint32_t)pui32Stack + sizeof(pui32Stack) },
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ IntDefaultHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ IntDefaultHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ IntDefaultHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ //
+ // Enable the floating-point unit. This must be done here to handle the
+ // case where main() uses floating-point and the function prologue saves
+ // floating-point registers (which will fault if floating-point is not
+ // enabled). Any configuration of the floating-point unit using DriverLib
+ // APIs must be done here prior to the floating-point unit being enabled.
+ //
+ // Note that this does not use DriverLib since it might not be included in
+ // this project.
+ //
+ HWREG(NVIC_CPAC) = ((HWREG(NVIC_CPAC) &
+ ~(NVIC_CPAC_CP10_M | NVIC_CPAC_CP11_M)) |
+ NVIC_CPAC_CP10_FULL | NVIC_CPAC_CP11_FULL);
+
+ //
+ // Call the application's entry point.
+ //
+ __iar_program_start();
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/project0/startup_gcc.c b/boards/ek-tm4c123gxl/project0/startup_gcc.c new file mode 100644 index 0000000..c20136c --- /dev/null +++ b/boards/ek-tm4c123gxl/project0/startup_gcc.c @@ -0,0 +1,342 @@ +//*****************************************************************************
+//
+// startup_gcc.c - Startup code for use with GNU tools.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// The entry point for the application.
+//
+//*****************************************************************************
+extern int main(void);
+
+//*****************************************************************************
+//
+// Reserve space for the system stack.
+//
+//*****************************************************************************
+static uint32_t pui32Stack[64];
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000.
+//
+//*****************************************************************************
+__attribute__ ((section(".isr_vector")))
+void (* const g_pfnVectors[])(void) =
+{
+ (void (*)(void))((uint32_t)pui32Stack + sizeof(pui32Stack)),
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ IntDefaultHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ IntDefaultHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ IntDefaultHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// The following are constructs created by the linker, indicating where the
+// the "data" and "bss" segments reside in memory. The initializers for the
+// for the "data" segment resides immediately following the "text" segment.
+//
+//*****************************************************************************
+extern uint32_t _etext;
+extern uint32_t _data;
+extern uint32_t _edata;
+extern uint32_t _bss;
+extern uint32_t _ebss;
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ uint32_t *pui32Src, *pui32Dest;
+
+ //
+ // Copy the data segment initializers from flash to SRAM.
+ //
+ pui32Src = &_etext;
+ for(pui32Dest = &_data; pui32Dest < &_edata; )
+ {
+ *pui32Dest++ = *pui32Src++;
+ }
+
+ //
+ // Zero fill the bss segment.
+ //
+ __asm(" ldr r0, =_bss\n"
+ " ldr r1, =_ebss\n"
+ " mov r2, #0\n"
+ " .thumb_func\n"
+ "zero_loop:\n"
+ " cmp r0, r1\n"
+ " it lt\n"
+ " strlt r2, [r0], #4\n"
+ " blt zero_loop");
+
+ //
+ // Enable the floating-point unit. This must be done here to handle the
+ // case where main() uses floating-point and the function prologue saves
+ // floating-point registers (which will fault if floating-point is not
+ // enabled). Any configuration of the floating-point unit using DriverLib
+ // APIs must be done here prior to the floating-point unit being enabled.
+ //
+ // Note that this does not use DriverLib since it might not be included in
+ // this project.
+ //
+ HWREG(NVIC_CPAC) = ((HWREG(NVIC_CPAC) &
+ ~(NVIC_CPAC_CP10_M | NVIC_CPAC_CP11_M)) |
+ NVIC_CPAC_CP10_FULL | NVIC_CPAC_CP11_FULL);
+
+ //
+ // Call the application's entry point.
+ //
+ main();
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/project0/startup_rvmdk.S b/boards/ek-tm4c123gxl/project0/startup_rvmdk.S new file mode 100644 index 0000000..c688cea --- /dev/null +++ b/boards/ek-tm4c123gxl/project0/startup_rvmdk.S @@ -0,0 +1,351 @@ +; <<< Use Configuration Wizard in Context Menu >>>
+;******************************************************************************
+;
+; startup_rvmdk.S - Startup code for use with Keil's uVision.
+;
+; Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+; Software License Agreement
+;
+; Texas Instruments (TI) is supplying this software for use solely and
+; exclusively on TI's microcontroller products. The software is owned by
+; TI and/or its suppliers, and is protected under applicable copyright
+; laws. You may not combine this software with "viral" open-source
+; software in order to form a larger program.
+;
+; THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+; NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+; NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+; A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+; CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+; DAMAGES, FOR ANY REASON WHATSOEVER.
+;
+; This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+;
+;******************************************************************************
+
+;******************************************************************************
+;
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+;******************************************************************************
+Stack EQU 0x00000100
+
+;******************************************************************************
+;
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+;******************************************************************************
+Heap EQU 0x00000000
+
+;******************************************************************************
+;
+; Allocate space for the stack.
+;
+;******************************************************************************
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+StackMem
+ SPACE Stack
+__initial_sp
+
+;******************************************************************************
+;
+; Allocate space for the heap.
+;
+;******************************************************************************
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+HeapMem
+ SPACE Heap
+__heap_limit
+
+;******************************************************************************
+;
+; Indicate that the code in this file preserves 8-byte alignment of the stack.
+;
+;******************************************************************************
+ PRESERVE8
+
+;******************************************************************************
+;
+; Place code into the reset code section.
+;
+;******************************************************************************
+ AREA RESET, CODE, READONLY
+ THUMB
+
+;******************************************************************************
+;
+; The vector table.
+;
+;******************************************************************************
+ EXPORT __Vectors
+__Vectors
+ DCD StackMem + Stack ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NmiSR ; NMI Handler
+ DCD FaultISR ; Hard Fault Handler
+ DCD IntDefaultHandler ; The MPU fault handler
+ DCD IntDefaultHandler ; The bus fault handler
+ DCD IntDefaultHandler ; The usage fault handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; SVCall handler
+ DCD IntDefaultHandler ; Debug monitor handler
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; The PendSV handler
+ DCD IntDefaultHandler ; The SysTick handler
+ DCD IntDefaultHandler ; GPIO Port A
+ DCD IntDefaultHandler ; GPIO Port B
+ DCD IntDefaultHandler ; GPIO Port C
+ DCD IntDefaultHandler ; GPIO Port D
+ DCD IntDefaultHandler ; GPIO Port E
+ DCD IntDefaultHandler ; UART0 Rx and Tx
+ DCD IntDefaultHandler ; UART1 Rx and Tx
+ DCD IntDefaultHandler ; SSI0 Rx and Tx
+ DCD IntDefaultHandler ; I2C0 Master and Slave
+ DCD IntDefaultHandler ; PWM Fault
+ DCD IntDefaultHandler ; PWM Generator 0
+ DCD IntDefaultHandler ; PWM Generator 1
+ DCD IntDefaultHandler ; PWM Generator 2
+ DCD IntDefaultHandler ; Quadrature Encoder 0
+ DCD IntDefaultHandler ; ADC Sequence 0
+ DCD IntDefaultHandler ; ADC Sequence 1
+ DCD IntDefaultHandler ; ADC Sequence 2
+ DCD IntDefaultHandler ; ADC Sequence 3
+ DCD IntDefaultHandler ; Watchdog timer
+ DCD IntDefaultHandler ; Timer 0 subtimer A
+ DCD IntDefaultHandler ; Timer 0 subtimer B
+ DCD IntDefaultHandler ; Timer 1 subtimer A
+ DCD IntDefaultHandler ; Timer 1 subtimer B
+ DCD IntDefaultHandler ; Timer 2 subtimer A
+ DCD IntDefaultHandler ; Timer 2 subtimer B
+ DCD IntDefaultHandler ; Analog Comparator 0
+ DCD IntDefaultHandler ; Analog Comparator 1
+ DCD IntDefaultHandler ; Analog Comparator 2
+ DCD IntDefaultHandler ; System Control (PLL, OSC, BO)
+ DCD IntDefaultHandler ; FLASH Control
+ DCD IntDefaultHandler ; GPIO Port F
+ DCD IntDefaultHandler ; GPIO Port G
+ DCD IntDefaultHandler ; GPIO Port H
+ DCD IntDefaultHandler ; UART2 Rx and Tx
+ DCD IntDefaultHandler ; SSI1 Rx and Tx
+ DCD IntDefaultHandler ; Timer 3 subtimer A
+ DCD IntDefaultHandler ; Timer 3 subtimer B
+ DCD IntDefaultHandler ; I2C1 Master and Slave
+ DCD IntDefaultHandler ; Quadrature Encoder 1
+ DCD IntDefaultHandler ; CAN0
+ DCD IntDefaultHandler ; CAN1
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; Hibernate
+ DCD IntDefaultHandler ; USB0
+ DCD IntDefaultHandler ; PWM Generator 3
+ DCD IntDefaultHandler ; uDMA Software Transfer
+ DCD IntDefaultHandler ; uDMA Error
+ DCD IntDefaultHandler ; ADC1 Sequence 0
+ DCD IntDefaultHandler ; ADC1 Sequence 1
+ DCD IntDefaultHandler ; ADC1 Sequence 2
+ DCD IntDefaultHandler ; ADC1 Sequence 3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; GPIO Port J
+ DCD IntDefaultHandler ; GPIO Port K
+ DCD IntDefaultHandler ; GPIO Port L
+ DCD IntDefaultHandler ; SSI2 Rx and Tx
+ DCD IntDefaultHandler ; SSI3 Rx and Tx
+ DCD IntDefaultHandler ; UART3 Rx and Tx
+ DCD IntDefaultHandler ; UART4 Rx and Tx
+ DCD IntDefaultHandler ; UART5 Rx and Tx
+ DCD IntDefaultHandler ; UART6 Rx and Tx
+ DCD IntDefaultHandler ; UART7 Rx and Tx
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; I2C2 Master and Slave
+ DCD IntDefaultHandler ; I2C3 Master and Slave
+ DCD IntDefaultHandler ; Timer 4 subtimer A
+ DCD IntDefaultHandler ; Timer 4 subtimer B
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; Timer 5 subtimer A
+ DCD IntDefaultHandler ; Timer 5 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 0 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 0 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 1 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 1 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 2 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 2 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 3 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 3 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 4 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 4 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 5 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 5 subtimer B
+ DCD IntDefaultHandler ; FPU
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; I2C4 Master and Slave
+ DCD IntDefaultHandler ; I2C5 Master and Slave
+ DCD IntDefaultHandler ; GPIO Port M
+ DCD IntDefaultHandler ; GPIO Port N
+ DCD IntDefaultHandler ; Quadrature Encoder 2
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; GPIO Port P (Summary or P0)
+ DCD IntDefaultHandler ; GPIO Port P1
+ DCD IntDefaultHandler ; GPIO Port P2
+ DCD IntDefaultHandler ; GPIO Port P3
+ DCD IntDefaultHandler ; GPIO Port P4
+ DCD IntDefaultHandler ; GPIO Port P5
+ DCD IntDefaultHandler ; GPIO Port P6
+ DCD IntDefaultHandler ; GPIO Port P7
+ DCD IntDefaultHandler ; GPIO Port Q (Summary or Q0)
+ DCD IntDefaultHandler ; GPIO Port Q1
+ DCD IntDefaultHandler ; GPIO Port Q2
+ DCD IntDefaultHandler ; GPIO Port Q3
+ DCD IntDefaultHandler ; GPIO Port Q4
+ DCD IntDefaultHandler ; GPIO Port Q5
+ DCD IntDefaultHandler ; GPIO Port Q6
+ DCD IntDefaultHandler ; GPIO Port Q7
+ DCD IntDefaultHandler ; GPIO Port R
+ DCD IntDefaultHandler ; GPIO Port S
+ DCD IntDefaultHandler ; PWM 1 Generator 0
+ DCD IntDefaultHandler ; PWM 1 Generator 1
+ DCD IntDefaultHandler ; PWM 1 Generator 2
+ DCD IntDefaultHandler ; PWM 1 Generator 3
+ DCD IntDefaultHandler ; PWM 1 Fault
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor first starts execution
+; following a reset event.
+;
+;******************************************************************************
+ EXPORT Reset_Handler
+Reset_Handler
+ ;
+ ; Enable the floating-point unit. This must be done here to handle the
+ ; case where main() uses floating-point and the function prologue saves
+ ; floating-point registers (which will fault if floating-point is not
+ ; enabled). Any configuration of the floating-point unit using
+ ; DriverLib APIs must be done here prior to the floating-point unit
+ ; being enabled.
+ ;
+ ; Note that this does not use DriverLib since it might not be included
+ ; in this project.
+ ;
+ MOVW R0, #0xED88
+ MOVT R0, #0xE000
+ LDR R1, [R0]
+ ORR R1, #0x00F00000
+ STR R1, [R0]
+
+ ;
+ ; Call the C library enty point that handles startup. This will copy
+ ; the .data section initializers from flash to SRAM and zero fill the
+ ; .bss section.
+ ;
+ IMPORT __main
+ B __main
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives a NMI. This
+; simply enters an infinite loop, preserving the system state for examination
+; by a debugger.
+;
+;******************************************************************************
+NmiSR
+ B NmiSR
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives a fault
+; interrupt. This simply enters an infinite loop, preserving the system state
+; for examination by a debugger.
+;
+;******************************************************************************
+FaultISR
+ B FaultISR
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives an unexpected
+; interrupt. This simply enters an infinite loop, preserving the system state
+; for examination by a debugger.
+;
+;******************************************************************************
+IntDefaultHandler
+ B IntDefaultHandler
+
+;******************************************************************************
+;
+; Make sure the end of this section is aligned.
+;
+;******************************************************************************
+ ALIGN
+
+;******************************************************************************
+;
+; Some code in the normal code section for initializing the heap and stack.
+;
+;******************************************************************************
+ AREA |.text|, CODE, READONLY
+
+;******************************************************************************
+;
+; The function expected of the C library startup code for defining the stack
+; and heap memory locations. For the C library version of the startup code,
+; provide this function so that the C library initialization code can find out
+; the location of the stack and heap.
+;
+;******************************************************************************
+ IF :DEF: __MICROLIB
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+ ELSE
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+__user_initial_stackheap
+ LDR R0, =HeapMem
+ LDR R1, =(StackMem + Stack)
+ LDR R2, =(HeapMem + Heap)
+ LDR R3, =StackMem
+ BX LR
+ ENDIF
+
+;******************************************************************************
+;
+; Make sure the end of this section is aligned.
+;
+;******************************************************************************
+ ALIGN
+
+;******************************************************************************
+;
+; Tell the assembler that we're done.
+;
+;******************************************************************************
+ END
diff --git a/boards/ek-tm4c123gxl/qs-rgb/Makefile b/boards/ek-tm4c123gxl/qs-rgb/Makefile new file mode 100644 index 0000000..1b963f7 --- /dev/null +++ b/boards/ek-tm4c123gxl/qs-rgb/Makefile @@ -0,0 +1,93 @@ +#******************************************************************************
+#
+# Makefile - Rules for building the Quickstart RGB.
+#
+# Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+# Software License Agreement
+#
+# Texas Instruments (TI) is supplying this software for use solely and
+# exclusively on TI's microcontroller products. The software is owned by
+# TI and/or its suppliers, and is protected under applicable copyright
+# laws. You may not combine this software with "viral" open-source
+# software in order to form a larger program.
+#
+# THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+# NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+# NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+# CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+# DAMAGES, FOR ANY REASON WHATSOEVER.
+#
+# This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+#
+#******************************************************************************
+
+#
+# Defines the part type that this project uses.
+#
+PART=TM4C123GH6PM
+
+#
+# The base directory for TivaWare.
+#
+ROOT=../../../..
+
+#
+# Include the common make definitions.
+#
+include ${ROOT}/makedefs
+
+#
+# Where to find source files that do not live in this directory.
+#
+VPATH=../drivers
+VPATH+=../../../../utils
+
+#
+# Where to find header files that do not live in the source directory.
+#
+IPATH=..
+IPATH+=../../../..
+
+#
+# The default rule, which causes the Quickstart RGB to be built.
+#
+all: ${COMPILER}
+all: ${COMPILER}/qs-rgb.axf
+
+#
+# The rule to clean out all the build products.
+#
+clean:
+ @rm -rf ${COMPILER} ${wildcard *~}
+
+#
+# The rule to create the target directory.
+#
+${COMPILER}:
+ @mkdir -p ${COMPILER}
+
+#
+# Rules for building the Quickstart RGB.
+#
+${COMPILER}/qs-rgb.axf: ${COMPILER}/buttons.o
+${COMPILER}/qs-rgb.axf: ${COMPILER}/cmdline.o
+${COMPILER}/qs-rgb.axf: ${COMPILER}/qs-rgb.o
+${COMPILER}/qs-rgb.axf: ${COMPILER}/rgb.o
+${COMPILER}/qs-rgb.axf: ${COMPILER}/rgb_commands.o
+${COMPILER}/qs-rgb.axf: ${COMPILER}/startup_${COMPILER}.o
+${COMPILER}/qs-rgb.axf: ${COMPILER}/uartstdio.o
+${COMPILER}/qs-rgb.axf: ${COMPILER}/ustdlib.o
+${COMPILER}/qs-rgb.axf: ${ROOT}/usblib/${COMPILER}/libusb.a
+${COMPILER}/qs-rgb.axf: ${ROOT}/driverlib/${COMPILER}/libdriver.a
+${COMPILER}/qs-rgb.axf: qs-rgb.ld
+SCATTERgcc_qs-rgb=qs-rgb.ld
+ENTRY_qs-rgb=ResetISR
+CFLAGSgcc=-DTARGET_IS_TM4C123_RB1 -DUART_BUFFERED
+
+#
+# Include the automatically generated dependency files.
+#
+ifneq (${MAKECMDGOALS},clean)
+-include ${wildcard ${COMPILER}/*.d} __dummy__
+endif
diff --git a/boards/ek-tm4c123gxl/qs-rgb/ccs/.ccsimportspec b/boards/ek-tm4c123gxl/qs-rgb/ccs/.ccsimportspec new file mode 100644 index 0000000..f2960bb --- /dev/null +++ b/boards/ek-tm4c123gxl/qs-rgb/ccs/.ccsimportspec @@ -0,0 +1,11 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<importSpec>
+ <source root="..">
+ <file name="qs-rgb.c"/>
+ <file name="qs-rgb.h"/>
+ <file name="rgb_commands.c"/>
+ <file name="rgb_commands.h"/>
+ <file regex=".*_ccs\.cmd"/>
+ <file name="startup_ccs.c"/>
+ </source>
+</importSpec>
diff --git a/boards/ek-tm4c123gxl/qs-rgb/ccs/.ccsproject b/boards/ek-tm4c123gxl/qs-rgb/ccs/.ccsproject new file mode 100644 index 0000000..75fb50e --- /dev/null +++ b/boards/ek-tm4c123gxl/qs-rgb/ccs/.ccsproject @@ -0,0 +1,10 @@ +<?xml version="1.0" encoding="UTF-8" ?>
+<?ccsproject version="1.0"?>
+<projectOptions>
+ <deviceVariant value="Cortex M.TM4C123GH6PM"/>
+ <deviceFamily value="TMS470"/>
+ <deviceEndianness value="little"/>
+ <codegenToolVersion value="5.0.4"/>
+ <isElfFormat value="true"/>
+ <rts value="libc.a"/>
+</projectOptions>
diff --git a/boards/ek-tm4c123gxl/qs-rgb/ccs/.cproject b/boards/ek-tm4c123gxl/qs-rgb/ccs/.cproject new file mode 100644 index 0000000..727570a --- /dev/null +++ b/boards/ek-tm4c123gxl/qs-rgb/ccs/.cproject @@ -0,0 +1,193 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+ <storageModule configRelations="2" moduleId="org.eclipse.cdt.core.settings">
+ <cconfiguration id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.2032690176">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.2032690176" moduleId="org.eclipse.cdt.core.settings" name="Debug">
+ <macros>
+ <stringMacro name="SW_ROOT" type="VALUE_PATH_DIR" value="${PROJECT_ROOT}/../../../../.."/>
+ </macros>
+ <externalSettings/>
+ <extensions>
+ <extension id="com.ti.ccstudio.binaryparser.CoffParser" point="org.eclipse.cdt.core.BinaryParser"/>
+ <extension id="com.ti.ccstudio.errorparser.CoffErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.LinkErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.AsmErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactExtension="out" artifactName="${ProjName}" buildProperties="" cleanCommand="${CG_CLEAN_CMD}" description="" id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.2032690176" name="Debug" parent="com.ti.ccstudio.buildDefinitions.TMS470.Debug" postbuildStep=""${CCE_INSTALL_ROOT}/utils/tiobj2bin/tiobj2bin" "${BuildArtifactFileName}" "${BuildArtifactFileBaseName}.bin" "${CG_TOOL_ROOT}/bin/armofd" "${CG_TOOL_ROOT}/bin/armhex" "${CCE_INSTALL_ROOT}/utils/tiobj2bin/mkhex4bin"">
+ <folderInfo id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.2032690176." name="/" resourcePath="">
+ <toolChain id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.DebugToolchain.1499349763" name="TI Build Tools" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.DebugToolchain" targetTool="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug.189097255">
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS.484109250" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS" valueType="stringList">
+ <listOptionValue builtIn="false" value="DEVICE_CONFIGURATION_ID=Cortex M.TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="DEVICE_ENDIANNESS=little"/>
+ <listOptionValue builtIn="false" value="OUTPUT_FORMAT=ELF"/>
+ <listOptionValue builtIn="false" value="CCS_MBS_VERSION=5.1.0.01"/>
+ <listOptionValue builtIn="false" value="RUNTIME_SUPPORT_LIBRARY=libc.a"/>
+ <listOptionValue builtIn="false" value="OUTPUT_TYPE=executable"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION.1737599598" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION" value="5.0.4" valueType="string"/>
+ <targetPlatform id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformDebug.1916790292" name="Platform" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformDebug"/>
+ <builder buildPath="${BuildDirectory}" id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderDebug.1417371162" name="GNU Make.Debug" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderDebug"/>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerDebug.2115085496" name="ARM Compiler" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerDebug">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.217386771" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.7M4" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.1207540684" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.683407561" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.eabi" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.927548663" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.FPv4SPD16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL.1725076147" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL.SYMDEBUG__DWARF" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING.903158293" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING" valueType="stringList">
+ <listOptionValue builtIn="false" value="225"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER.1713387239" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.1747365037" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH.967373439" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH" valueType="includePath">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/examples/boards/ek-tm4c123gxl""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN.2144259875" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.970516118" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.on" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL.1522437053" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL.2" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC.63280849" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL.1195301751" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE.1488694799" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE" valueType="definedSymbols">
+ <listOptionValue builtIn="false" value="ccs="ccs""/>
+ <listOptionValue builtIn="false" value="PART_TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="TARGET_IS_TM4C123_RB1"/>
+ <listOptionValue builtIn="false" value="UART_BUFFERED"/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS.957124911" name="C Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS.189998538" name="C++ Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS.1454315222" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS.494807233" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS"/>
+ </tool>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug.189097255" name="ARM Linker" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE.1327751819" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE" value=""qs-rgb_ccs.map"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE.1516774485" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE" value="2048" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE.34496856" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE" value="0" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE.1210676417" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE" value=""${ProjName}.out"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO.1776683162" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO" value=""${ProjName}_linkInfo.xml"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER.450404115" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.1298381834" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH.183890940" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH" valueType="libPaths">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/lib""/>
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY.1299245426" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY" valueType="libs">
+ <listOptionValue builtIn="false" value=""libc.a""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/driverlib/ccs/Debug/driverlib.lib""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/usblib/ccs/Debug/usblib.lib""/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS.376146687" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS.517782236" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS.2096024955" name="Generated Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS"/>
+ </tool>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ <cconfiguration id="com.ti.ccstudio.buildDefinitions.TMS470.Release.313210160">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.ti.ccstudio.buildDefinitions.TMS470.Release.313210160" moduleId="org.eclipse.cdt.core.settings" name="Release">
+ <macros>
+ <stringMacro name="SW_ROOT" type="VALUE_PATH_DIR" value="${PROJECT_ROOT}/../../../../.."/>
+ </macros>
+ <externalSettings/>
+ <extensions>
+ <extension id="com.ti.ccstudio.binaryparser.CoffParser" point="org.eclipse.cdt.core.BinaryParser"/>
+ <extension id="com.ti.ccstudio.errorparser.CoffErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.LinkErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.AsmErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactExtension="out" artifactName="${ProjName}" buildProperties="" cleanCommand="${CG_CLEAN_CMD}" description="" id="com.ti.ccstudio.buildDefinitions.TMS470.Release.313210160" name="Release" parent="com.ti.ccstudio.buildDefinitions.TMS470.Release" postbuildStep=""${CCE_INSTALL_ROOT}/utils/tiobj2bin/tiobj2bin" "${BuildArtifactFileName}" "${BuildArtifactFileBaseName}.bin" "${CG_TOOL_ROOT}/bin/armofd" "${CG_TOOL_ROOT}/bin/armhex" "${CCE_INSTALL_ROOT}/utils/tiobj2bin/mkhex4bin"">
+ <folderInfo id="com.ti.ccstudio.buildDefinitions.TMS470.Release.313210160." name="/" resourcePath="">
+ <toolChain id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.ReleaseToolchain.646265315" name="TI Build Tools" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.ReleaseToolchain" targetTool="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease.1011647292">
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS.1260160875" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS" valueType="stringList">
+ <listOptionValue builtIn="false" value="DEVICE_CONFIGURATION_ID=Cortex M.TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="DEVICE_ENDIANNESS=little"/>
+ <listOptionValue builtIn="false" value="OUTPUT_FORMAT=ELF"/>
+ <listOptionValue builtIn="false" value="CCS_MBS_VERSION=5.1.0.01"/>
+ <listOptionValue builtIn="false" value="RUNTIME_SUPPORT_LIBRARY=libc.a"/>
+ <listOptionValue builtIn="false" value="OUTPUT_TYPE=executable"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION.1390626231" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION" value="5.0.4" valueType="string"/>
+ <targetPlatform id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformRelease.1091535984" name="Platform" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformRelease"/>
+ <builder buildPath="${BuildDirectory}" id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderRelease.1833612827" name="GNU Make.Release" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderRelease"/>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerRelease.90502070" name="ARM Compiler" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerRelease">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.1010025931" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.7M4" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.2098350611" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.1834635668" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.eabi" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.1448045026" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.FPv4SPD16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING.375742313" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING" valueType="stringList">
+ <listOptionValue builtIn="false" value="225"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER.878825755" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.349054706" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH.1138577075" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH" valueType="includePath">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/examples/boards/ek-tm4c123gxl""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN.1391169077" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.1982464442" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.on" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC.593035870" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL.1139000779" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE.1493891817" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE" valueType="definedSymbols">
+ <listOptionValue builtIn="false" value="ccs="ccs""/>
+ <listOptionValue builtIn="false" value="PART_TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="TARGET_IS_TM4C123_RB1"/>
+ <listOptionValue builtIn="false" value="UART_BUFFERED"/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS.326004399" name="C Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS.1287028382" name="C++ Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS.163367899" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS.1724574479" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS"/>
+ </tool>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease.1011647292" name="ARM Linker" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE.539521190" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE" value=""qs-rgb_ccs.map"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE.1723926683" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE" value="2048" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE.2010893873" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE" value="0" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE.112374614" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE" value=""${ProjName}.out"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO.123041170" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO" value=""${ProjName}_linkInfo.xml"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER.343711331" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.1710106692" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH.1484100408" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH" valueType="libPaths">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/lib""/>
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY.435300470" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY" valueType="libs">
+ <listOptionValue builtIn="false" value=""libc.a""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/driverlib/ccs/Debug/driverlib.lib""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/usblib/ccs/Debug/usblib.lib""/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS.418829737" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS.1194989224" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS.961377587" name="Generated Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS"/>
+ </tool>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <project id="qs-rgb.com.ti.ccstudio.buildDefinitions.TMS470.ProjectType.837770645" name="ARM" projectType="com.ti.ccstudio.buildDefinitions.TMS470.ProjectType"/>
+ </storageModule>
+ <storageModule moduleId="scannerConfiguration"/>
+ <storageModule moduleId="org.eclipse.cdt.core.language.mapping">
+ <project-mappings>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.asmSource" language="com.ti.ccstudio.core.TIASMLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cHeader" language="com.ti.ccstudio.core.TIGCCLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cSource" language="com.ti.ccstudio.core.TIGCCLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cxxHeader" language="com.ti.ccstudio.core.TIGPPLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cxxSource" language="com.ti.ccstudio.core.TIGPPLanguage"/>
+ </project-mappings>
+ </storageModule>
+</cproject>
diff --git a/boards/ek-tm4c123gxl/qs-rgb/ccs/.project b/boards/ek-tm4c123gxl/qs-rgb/ccs/.project new file mode 100644 index 0000000..c3894a7 --- /dev/null +++ b/boards/ek-tm4c123gxl/qs-rgb/ccs/.project @@ -0,0 +1,80 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+ <name>qs-rgb</name>
+ <comment></comment>
+ <projects>
+ </projects>
+ <buildSpec>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+ <triggers>full,incremental,</triggers>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ </buildSpec>
+ <natures>
+ <nature>com.ti.ccstudio.core.ccsNature</nature>
+ <nature>org.eclipse.cdt.core.cnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+ <nature>org.eclipse.cdt.core.ccnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+ </natures>
+ <linkedResources>
+ <link>
+ <name>qs-rgb.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/qs-rgb/qs-rgb.c</locationURI>
+ </link>
+ <link>
+ <name>qs-rgb_ccs.cmd</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/qs-rgb/qs-rgb_ccs.cmd</locationURI>
+ </link>
+ <link>
+ <name>rgb_commands.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/qs-rgb/rgb_commands.c</locationURI>
+ </link>
+ <link>
+ <name>startup_ccs.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/qs-rgb/startup_ccs.c</locationURI>
+ </link>
+ <link>
+ <name>drivers/buttons.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/drivers/buttons.c</locationURI>
+ </link>
+ <link>
+ <name>drivers/rgb.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/drivers/rgb.c</locationURI>
+ </link>
+ <link>
+ <name>utils/cmdline.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/utils/cmdline.c</locationURI>
+ </link>
+ <link>
+ <name>utils/uartstdio.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/utils/uartstdio.c</locationURI>
+ </link>
+ <link>
+ <name>utils/ustdlib.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/utils/ustdlib.c</locationURI>
+ </link>
+ </linkedResources>
+ <variableList>
+ <variable>
+ <name>SW_ROOT</name>
+ <value>$%7BPARENT-5-PROJECT_LOC%7D</value>
+ </variable>
+ </variableList>
+</projectDescription>
diff --git a/boards/ek-tm4c123gxl/qs-rgb/ccs/.settings/org.eclipse.cdt.codan.core.prefs b/boards/ek-tm4c123gxl/qs-rgb/ccs/.settings/org.eclipse.cdt.codan.core.prefs new file mode 100644 index 0000000..98b6350 --- /dev/null +++ b/boards/ek-tm4c123gxl/qs-rgb/ccs/.settings/org.eclipse.cdt.codan.core.prefs @@ -0,0 +1,3 @@ +eclipse.preferences.version=1
+inEditor=false
+onBuild=false
diff --git a/boards/ek-tm4c123gxl/qs-rgb/ccs/Debug/qs-rgb.bin b/boards/ek-tm4c123gxl/qs-rgb/ccs/Debug/qs-rgb.bin Binary files differnew file mode 100644 index 0000000..329a400 --- /dev/null +++ b/boards/ek-tm4c123gxl/qs-rgb/ccs/Debug/qs-rgb.bin diff --git a/boards/ek-tm4c123gxl/qs-rgb/ccs/Debug/qs-rgb.out b/boards/ek-tm4c123gxl/qs-rgb/ccs/Debug/qs-rgb.out Binary files differnew file mode 100644 index 0000000..d5ac3df --- /dev/null +++ b/boards/ek-tm4c123gxl/qs-rgb/ccs/Debug/qs-rgb.out diff --git a/boards/ek-tm4c123gxl/qs-rgb/ccs/macros.ini_initial b/boards/ek-tm4c123gxl/qs-rgb/ccs/macros.ini_initial new file mode 100644 index 0000000..31214b5 --- /dev/null +++ b/boards/ek-tm4c123gxl/qs-rgb/ccs/macros.ini_initial @@ -0,0 +1 @@ +SW_ROOT = ../../../../..
diff --git a/boards/ek-tm4c123gxl/qs-rgb/ccs/target_config.ccxml b/boards/ek-tm4c123gxl/qs-rgb/ccs/target_config.ccxml new file mode 100644 index 0000000..be4342a --- /dev/null +++ b/boards/ek-tm4c123gxl/qs-rgb/ccs/target_config.ccxml @@ -0,0 +1,13 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<configurations XML_version="1.2" id="configurations_0">
+ <configuration XML_version="1.2" id="Stellaris In-Circuit Debug Interface_0">
+ <instance XML_version="1.2" desc="Stellaris In-Circuit Debug Interface_0" href="connections/Stellaris_ICDI_Connection.xml" id="Stellaris In-Circuit Debug Interface_0" xml="Stellaris_ICDI_Connection.xml" xmlpath="connections"/>
+ <connection XML_version="1.2" id="Stellaris In-Circuit Debug Interface_0">
+ <instance XML_version="1.2" href="drivers/stellaris_cs_dap.xml" id="drivers" xml="stellaris_cs_dap.xml" xmlpath="drivers"/>
+ <instance XML_version="1.2" href="drivers/stellaris_cortex_m4.xml" id="drivers" xml="stellaris_cortex_m4.xml" xmlpath="drivers"/>
+ <platform XML_version="1.2" id="platform_0">
+ <instance XML_version="1.2" desc="Stellaris TM4C123GH6PM_0" href="devices/tm4c123gh6pm.xml" id="Stellaris TM4C123GH6PM_0" xml="tm4c123gh6pm.xml" xmlpath="devices"/>
+ </platform>
+ </connection>
+ </configuration>
+</configurations>
diff --git a/boards/ek-tm4c123gxl/qs-rgb/ewarm/Exe/qs-rgb.bin b/boards/ek-tm4c123gxl/qs-rgb/ewarm/Exe/qs-rgb.bin Binary files differnew file mode 100644 index 0000000..0f965ff --- /dev/null +++ b/boards/ek-tm4c123gxl/qs-rgb/ewarm/Exe/qs-rgb.bin diff --git a/boards/ek-tm4c123gxl/qs-rgb/ewarm/Exe/qs-rgb.out b/boards/ek-tm4c123gxl/qs-rgb/ewarm/Exe/qs-rgb.out Binary files differnew file mode 100644 index 0000000..d480c4e --- /dev/null +++ b/boards/ek-tm4c123gxl/qs-rgb/ewarm/Exe/qs-rgb.out diff --git a/boards/ek-tm4c123gxl/qs-rgb/gcc/qs-rgb.axf b/boards/ek-tm4c123gxl/qs-rgb/gcc/qs-rgb.axf Binary files differnew file mode 100644 index 0000000..c2e1249 --- /dev/null +++ b/boards/ek-tm4c123gxl/qs-rgb/gcc/qs-rgb.axf diff --git a/boards/ek-tm4c123gxl/qs-rgb/gcc/qs-rgb.bin b/boards/ek-tm4c123gxl/qs-rgb/gcc/qs-rgb.bin Binary files differnew file mode 100644 index 0000000..2ec0c27 --- /dev/null +++ b/boards/ek-tm4c123gxl/qs-rgb/gcc/qs-rgb.bin diff --git a/boards/ek-tm4c123gxl/qs-rgb/qs-rgb.c b/boards/ek-tm4c123gxl/qs-rgb/qs-rgb.c new file mode 100644 index 0000000..070b927 --- /dev/null +++ b/boards/ek-tm4c123gxl/qs-rgb/qs-rgb.c @@ -0,0 +1,714 @@ +//*****************************************************************************
+//
+// qs-rgb.c - Quickstart for the EK-TM4C123GXL.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <math.h>
+#include <time.h>
+#include "inc/hw_types.h"
+#include "inc/hw_memmap.h"
+#include "inc/hw_hibernate.h"
+#include "driverlib/fpu.h"
+#include "driverlib/gpio.h"
+#include "driverlib/hibernate.h"
+#include "driverlib/interrupt.h"
+#include "driverlib/pin_map.h"
+#include "driverlib/rom.h"
+#include "driverlib/sysctl.h"
+#include "driverlib/systick.h"
+#include "driverlib/uart.h"
+#include "utils/uartstdio.h"
+#include "utils/cmdline.h"
+#include "drivers/rgb.h"
+#include "drivers/buttons.h"
+#include "rgb_commands.h"
+#include "qs-rgb.h"
+
+//*****************************************************************************
+//
+//! \addtogroup example_list
+//! <h1>EK-TM4C123GXL Quickstart Application (qs-rgb)</h1>
+//!
+//! A demonstration of the Tiva C Series LaunchPad (EK-TM4C123GXL)
+//! capabilities.
+//!
+//! Press and/or hold the left button to traverse towards the red end of the
+//! ROYGBIV color spectrum. Press and/or hold the right button to traverse
+//! toward the violet end of the ROYGBIV color spectrum.
+//!
+//! If no input is received for 5 seconds, the application will start
+//! automatically changing the color displayed.
+//!
+//! Press and hold both left and right buttons for 3 seconds to enter
+//! hibernation. During hibernation, the last color displayed will blink
+//! for 0.5 seconds every 3 seconds.
+//!
+//! The system can also be controlled via a command line provided via the UART.
+//! Configure your host terminal emulator for 115200, 8-N-1 to access this
+//! feature.
+//!
+//! - Command 'help' generates a list of commands and helpful information.
+//! - Command 'hib' will place the device into hibernation mode.
+//! - Command 'rand' will initiate the pseudo-random color sequence.
+//! - Command 'intensity' followed by a number between 0 and 100 will set the
+//! brightness of the LED as a percentage of maximum brightness.
+//! - Command 'rgb' followed by a six character hex value will set the color.
+//! For example 'rgb FF0000' will produce a red color.
+//
+//*****************************************************************************
+
+//*****************************************************************************
+//
+// Entry counter to track how int32_t to stay in certain staging states before
+// making transition into hibernate.
+//
+//*****************************************************************************
+static volatile uint32_t ui32HibModeEntryCount;
+
+//*****************************************************************************
+//
+// Array of pre-defined colors for use when buttons cause manual color steps.
+//
+//*****************************************************************************
+static float fManualColors[7] = {0.0f, .214f, .428f, .642f, .856f, 1.07f,
+ 1.284f};
+
+//*****************************************************************************
+//
+// Input buffer for the command line interpreter.
+//
+//*****************************************************************************
+static char g_cInput[APP_INPUT_BUF_SIZE];
+
+//*****************************************************************************
+//
+// Application state structure. Gets stored to hibernate memory for
+// preservation across hibernate events.
+//
+//*****************************************************************************
+volatile tAppState g_sAppState;
+
+//*****************************************************************************
+//
+// The error routine that is called if the driver library encounters an error.
+//
+//*****************************************************************************
+#ifdef DEBUG
+void
+__error__(char *pcFilename, uint32_t ui32Line)
+{
+}
+#endif
+
+
+//*****************************************************************************
+//
+// Handler to manage the button press events and state machine transitions
+// that result from those button events.
+//
+// This function is called by the SysTickIntHandler if a button event is
+// detected. Function will determine which button was pressed and tweak various
+// elements of the global state structure accordingly.
+//
+//*****************************************************************************
+void
+AppButtonHandler(void)
+{
+ static uint32_t ui32TickCounter;
+
+ ui32TickCounter++;
+
+ //
+ // Switch statement to adjust the color wheel position based on buttons
+ //
+ switch(g_sAppState.ui32Buttons & ALL_BUTTONS)
+ {
+
+ case LEFT_BUTTON:
+
+ //
+ // Check if the button has been held int32_t enough to peform another
+ // color wheel increment.
+ //
+ if((ui32TickCounter % APP_BUTTON_POLL_DIVIDER) == 0)
+ {
+ //
+ // Perform the increment and index wrap around.
+ //
+ g_sAppState.ui32ManualIndex++;
+ if(g_sAppState.ui32ManualIndex >= APP_NUM_MANUAL_COLORS)
+ {
+ g_sAppState.ui32ManualIndex = 0;
+ }
+ g_sAppState.fColorWheelPos = APP_PI *
+ fManualColors[g_sAppState.ui32ManualIndex];
+ }
+
+ //
+ // Reset some state counts and system mode so that we know the user
+ // is present and actively engaging with the application.
+ //
+ ui32HibModeEntryCount = 0;
+ g_sAppState.ui32ModeTimer = 0;
+ g_sAppState.ui32Mode = APP_MODE_NORMAL;
+ break;
+
+ case RIGHT_BUTTON:
+
+ //
+ // Check if the button has been held int32_t enough to perform another
+ // color wheel decrement.
+ //
+ if((ui32TickCounter % APP_BUTTON_POLL_DIVIDER) == 0)
+ {
+ //
+ // Perform the decrement and index wrap around.
+ //
+ if(g_sAppState.ui32ManualIndex == 0)
+ {
+ //
+ // set to one greater than the last color so that we decrement
+ // back into range with next instruction.
+ //
+ g_sAppState.ui32ManualIndex = APP_NUM_MANUAL_COLORS;
+ }
+ g_sAppState.ui32ManualIndex--;
+ g_sAppState.fColorWheelPos = APP_PI *
+ fManualColors[g_sAppState.ui32ManualIndex];
+ }
+ //
+ // Reset some state counts and system mode so that we know the user
+ // is present and actively engaging with the application.
+ //
+ ui32HibModeEntryCount = 0;
+ g_sAppState.ui32ModeTimer = 0;
+ g_sAppState.ui32Mode = APP_MODE_NORMAL;
+ break;
+
+ case ALL_BUTTONS:
+
+ //
+ // Both buttons for longer than debounce time will cause hibernation
+ //
+ if(ui32HibModeEntryCount < APP_HIB_BUTTON_DEBOUNCE)
+ {
+ ui32HibModeEntryCount++;
+ g_sAppState.ui32Mode = APP_MODE_NORMAL;
+ }
+ else
+ {
+ g_sAppState.ui32Mode = APP_MODE_HIB;
+ }
+ g_sAppState.ui32ModeTimer = 0;
+ break;
+
+ default:
+ if(g_sAppState.ui32Mode == APP_MODE_HIB_FLASH)
+ {
+ //
+ // Waking from hibernate RTC just do a quick flash then back to
+ // hibernation.
+ //
+ if(ui32HibModeEntryCount < APP_HIB_FLASH_DURATION)
+ {
+ ui32HibModeEntryCount++;
+ }
+ else
+ {
+ g_sAppState.ui32Mode = APP_MODE_HIB;
+ }
+ }
+ else
+ {
+ //
+ // Normal or remote mode and no user action will cause transition
+ // to automatic scrolling mode.
+ //
+ ui32HibModeEntryCount = 0;
+ if(g_sAppState.ui32ModeTimer < APP_AUTO_MODE_TIMEOUT)
+ {
+ g_sAppState.ui32ModeTimer++;
+ }
+ else
+ {
+ g_sAppState.ui32Mode = APP_MODE_AUTO;
+ }
+
+ //
+ // reset the tick counter when no buttons are pressed
+ // this makes the first button reaction speed quicker
+ //
+ ui32TickCounter = APP_BUTTON_POLL_DIVIDER - 1;
+ }
+ break;
+ }
+}
+
+//*****************************************************************************
+//
+// Uses the fColorWheelPos variable to update the color mix shown on the RGB
+//
+// ui32ForceUpdate when set forces a color update even if a color change
+// has not been detected. Used primarily at startup to init the color after
+// a hibernate.
+//
+// This function is called by the SysTickIntHandler to update the colors on
+// the RGB LED whenever a button or timeout event has changed the color wheel
+// position. Color is determined by a series of sine functions and conditions
+//
+//*****************************************************************************
+void
+AppRainbow(uint32_t ui32ForceUpdate)
+{
+ static float fPrevPos;
+ float fCurPos;
+ float fTemp;
+ volatile uint32_t * pui32Colors;
+
+ pui32Colors = g_sAppState.ui32Colors;
+ fCurPos = g_sAppState.fColorWheelPos;
+
+
+ if((fCurPos != fPrevPos) || ui32ForceUpdate)
+ {
+ //
+ // Preserve the new color wheel position
+ //
+ fPrevPos = fCurPos;
+
+ //
+ // Adjust the BLUE value based on the control state
+ //
+ fTemp = 65535.0f * sinf(fCurPos);
+ if(fTemp < 0)
+ {
+ pui32Colors[GREEN] = 0;
+ }
+ else
+ {
+ pui32Colors[GREEN] = (uint32_t) fTemp;
+ }
+
+
+ //
+ // Adjust the RED value based on the control state
+ //
+ fTemp = 65535.0f * sinf(fCurPos - APP_PI / 2.0f);
+ if(fTemp < 0)
+ {
+ pui32Colors[BLUE] = 0;
+ }
+ else
+ {
+ pui32Colors[BLUE] = (uint32_t) fTemp;
+ }
+
+
+ //
+ // Adjust the GREEN value based on the control state
+ //
+ if(fCurPos < APP_PI)
+ {
+ fTemp = 65535.0f * sinf(fCurPos + APP_PI * 0.5f);
+ }
+ else
+ {
+ fTemp = 65535.0f * sinf(fCurPos + APP_PI);
+ }
+ if(fTemp < 0)
+ {
+ pui32Colors[RED] = 0;
+ }
+ else
+ {
+ pui32Colors[RED] = (uint32_t) fTemp;
+ }
+
+ //
+ // Update the actual LED state
+ //
+ RGBColorSet(pui32Colors);
+ }
+
+}
+
+//*****************************************************************************
+//
+// Called by the NVIC as a result of SysTick Timer rollover interrupt flag
+//
+// Checks buttons and calls AppButtonHandler to manage button events.
+// Tracks time and auto mode color stepping. Calls AppRainbow to implement
+// RGB color changes.
+//
+//*****************************************************************************
+void
+SysTickIntHandler(void)
+{
+
+ static float x;
+
+ g_sAppState.ui32Buttons = ButtonsPoll(0,0);
+ AppButtonHandler();
+
+ //
+ // Auto increment the color wheel if in the AUTO mode. AUTO mode is when
+ // device is active but user interaction has timed out.
+ //
+ if(g_sAppState.ui32Mode == APP_MODE_AUTO)
+ {
+ g_sAppState.fColorWheelPos += APP_AUTO_COLOR_STEP;
+ }
+
+ //
+ // Provide wrap around of the control variable from 0 to 1.5 times PI
+ //
+ if(g_sAppState.fColorWheelPos > (APP_PI * 1.5f))
+ {
+ g_sAppState.fColorWheelPos = 0.0f;
+ }
+ if(x < 0.0f)
+ {
+ g_sAppState.fColorWheelPos = APP_PI * 1.5f;
+ }
+
+ //
+ // Set the RGB Color based on current control variable value.
+ //
+ AppRainbow(0);
+
+
+}
+
+//*****************************************************************************
+//
+// Uses the fColorWheelPos variable to update the color mix shown on the RGB
+//
+// This function is called when system has decided it is time to enter
+// Hibernate. This will prepare the hibernate peripheral, save the system
+// state and then enter hibernate mode.
+//
+//*****************************************************************************
+void
+AppHibernateEnter(void)
+{
+ //
+ // Alert UART command line users that we are going to hibernate
+ //
+ UARTprintf("Entering Hibernate...\n");
+
+ //
+ // Prepare Hibernation Module
+ //
+ HibernateGPIORetentionEnable();
+ HibernateRTCSet(0);
+ HibernateRTCEnable();
+ HibernateRTCMatchSet(0, 5);
+ HibernateWakeSet(HIBERNATE_WAKE_PIN | HIBERNATE_WAKE_RTC);
+
+ //
+ // Store state information to battery backed memory
+ // since sizeof returns number of bytes we convert to words and force
+ // a rounding up to next whole word.
+ //
+ HibernateDataSet((uint32_t*)&g_sAppState, sizeof(tAppState)/4+1);
+
+ //
+ // Disable the LED for 100 milliseconds to let user know we are
+ // ready for hibernate and will hibernate on relase of buttons
+ //
+ RGBDisable();
+ SysCtlDelay(SysCtlClockGet()/3/10);
+ RGBEnable();
+
+ //
+ // Wait for wake button to be released prior to going into hibernate
+ //
+ while(g_sAppState.ui32Buttons & RIGHT_BUTTON)
+ {
+ //
+ //Delay for about 300 clock ticks to allow time for interrupts to
+ //sense that button is released
+ //
+ SysCtlDelay(100);
+ }
+
+ //
+ // Disable the LED for power savings and go to hibernate mode
+ //
+ RGBDisable();
+ HibernateRequest();
+
+
+}
+
+//*****************************************************************************
+//
+// Configure the UART and its pins. This must be called before UARTprintf().
+//
+//*****************************************************************************
+void
+ConfigureUART(void)
+{
+ //
+ // Enable the GPIO Peripheral used by the UART.
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOA);
+
+ //
+ // Enable UART0
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_UART0);
+
+ //
+ // Configure GPIO Pins for UART mode.
+ //
+ ROM_GPIOPinConfigure(GPIO_PA0_U0RX);
+ ROM_GPIOPinConfigure(GPIO_PA1_U0TX);
+ ROM_GPIOPinTypeUART(GPIO_PORTA_BASE, GPIO_PIN_0 | GPIO_PIN_1);
+
+ //
+ // Use the internal 16MHz oscillator as the UART clock source.
+ //
+ UARTClockSourceSet(UART0_BASE, UART_CLOCK_PIOSC);
+
+ //
+ // Initialize the UART for console I/O.
+ //
+ UARTStdioConfig(0, 115200, 16000000);
+}
+
+//*****************************************************************************
+//
+// Main function performs init and manages system.
+//
+// Called automatically after the system and compiler pre-init sequences.
+// Performs system init calls, restores state from hibernate if needed and
+// then manages the application context duties of the system.
+//
+//*****************************************************************************
+int
+main(void)
+{
+ uint32_t ui32Status;
+ uint32_t ui32ResetCause;
+ int32_t i32CommandStatus;
+
+ //
+ // Enable stacking for interrupt handlers. This allows floating-point
+ // instructions to be used within interrupt handlers, but at the expense of
+ // extra stack usage.
+ //
+ ROM_FPUEnable();
+ ROM_FPUStackingEnable();
+
+ //
+ // Set the system clock to run at 40Mhz off PLL with external crystal as
+ // reference.
+ //
+ ROM_SysCtlClockSet(SYSCTL_SYSDIV_5 | SYSCTL_USE_PLL | SYSCTL_XTAL_16MHZ |
+ SYSCTL_OSC_MAIN);
+
+ //
+ // Enable the hibernate module
+ //
+ SysCtlPeripheralEnable(SYSCTL_PERIPH_HIBERNATE);
+
+ //
+ // Enable and Initialize the UART.
+ //
+ ConfigureUART();
+
+ UARTprintf("Welcome to the Tiva C Series TM4C123G LaunchPad!\n");
+ UARTprintf("Type 'help' for a list of commands\n");
+ UARTprintf("> ");
+
+ //
+ // Determine why system reset occurred and respond accordingly.
+ //
+ ui32ResetCause = SysCtlResetCauseGet();
+ SysCtlResetCauseClear(ui32ResetCause);
+ if(ui32ResetCause == SYSCTL_CAUSE_POR)
+ {
+ if(HibernateIsActive())
+ {
+ //
+ // Read the status bits to see what caused the wake.
+ //
+ ui32Status = HibernateIntStatus(0);
+ HibernateIntClear(ui32Status);
+
+ //
+ // Wake was due to the push button.
+ //
+ if(ui32Status & HIBERNATE_INT_PIN_WAKE)
+ {
+ UARTprintf("Hibernate Wake Pin Wake Event\n");
+ UARTprintf("> ");
+
+ //
+ // Recover the application state variables from battery backed
+ // hibernate memory. Set ui32Mode to normal.
+ //
+ HibernateDataGet((uint32_t*) &g_sAppState,
+ sizeof(tAppState) / 4 + 1);
+ g_sAppState.ui32Mode = APP_MODE_NORMAL;
+ }
+
+ //
+ // Wake was due to RTC match
+ //
+ else if(ui32Status & HIBERNATE_INT_RTC_MATCH_0)
+ {
+ UARTprintf("Hibernate RTC Wake Event\n");
+ UARTprintf("> ");
+ //
+ // Recover the application state variables from battery backed
+ // hibernate memory. Set ui32Mode to briefly flash the RGB.
+ //
+ HibernateDataGet((uint32_t*) &g_sAppState,
+ sizeof(tAppState) / 4 + 1);
+ g_sAppState.ui32Mode = APP_MODE_HIB_FLASH;
+ }
+ }
+
+ else
+ {
+ //
+ // Reset was do to a cold first time power up.
+ //
+ UARTprintf("Power on reset. Hibernate not active.\n");
+ UARTprintf("> ");
+
+ g_sAppState.ui32Mode = APP_MODE_NORMAL;
+ g_sAppState.fColorWheelPos = 0;
+ g_sAppState.fIntensity = APP_INTENSITY_DEFAULT;
+ g_sAppState.ui32Buttons = 0;
+ }
+ }
+ else
+ {
+ //
+ // External Pin reset or other reset event occured.
+ //
+ UARTprintf("External or other reset\n");
+ UARTprintf("> ");
+
+ //
+ // Treat this as a cold power up reset without restore from hibernate.
+ //
+ g_sAppState.ui32Mode = APP_MODE_NORMAL;
+ g_sAppState.fColorWheelPos = APP_PI;
+ g_sAppState.fIntensity = APP_INTENSITY_DEFAULT;
+ g_sAppState.ui32Buttons = 0;
+
+ //
+ // colors get a default initialization later when we call AppRainbow.
+ //
+ }
+
+ //
+ // Initialize clocking for the Hibernate module
+ //
+ HibernateEnableExpClk(SysCtlClockGet());
+
+ //
+ // Initialize the RGB LED. AppRainbow typically only called from interrupt
+ // context. Safe to call here to force initial color update because
+ // interrupts are not yet enabled.
+ //
+ RGBInit(0);
+ RGBIntensitySet(g_sAppState.fIntensity);
+ AppRainbow(1);
+ RGBEnable();
+
+ //
+ // Initialize the buttons
+ //
+ ButtonsInit();
+
+ //
+ // Initialize the SysTick interrupt to process colors and buttons.
+ //
+ SysTickPeriodSet(SysCtlClockGet() / APP_SYSTICKS_PER_SEC);
+ SysTickEnable();
+ SysTickIntEnable();
+ IntMasterEnable();
+
+ //
+ // spin forever and wait for carriage returns or state changes.
+ //
+ while(1)
+ {
+
+ UARTprintf("\n>");
+
+
+ //
+ // Peek to see if a full command is ready for processing
+ //
+ while(UARTPeek('\r') == -1)
+ {
+ //
+ // millisecond delay. A SysCtlSleep() here would also be OK.
+ //
+ SysCtlDelay(SysCtlClockGet() / (1000 / 3));
+
+ //
+ // Check for change of mode and enter hibernate if requested.
+ // all other mode changes handled in interrupt context.
+ //
+ if(g_sAppState.ui32Mode == APP_MODE_HIB)
+ {
+ AppHibernateEnter();
+ }
+ }
+
+ //
+ // a '\r' was detected get the line of text from the user.
+ //
+ UARTgets(g_cInput,sizeof(g_cInput));
+
+ //
+ // Pass the line from the user to the command processor.
+ // It will be parsed and valid commands executed.
+ //
+ i32CommandStatus = CmdLineProcess(g_cInput);
+
+ //
+ // Handle the case of bad command.
+ //
+ if(i32CommandStatus == CMDLINE_BAD_CMD)
+ {
+ UARTprintf("Bad command!\n");
+ }
+
+ //
+ // Handle the case of too many arguments.
+ //
+ else if(i32CommandStatus == CMDLINE_TOO_MANY_ARGS)
+ {
+ UARTprintf("Too many arguments for command processor!\n");
+ }
+ }
+}
diff --git a/boards/ek-tm4c123gxl/qs-rgb/qs-rgb.ewd b/boards/ek-tm4c123gxl/qs-rgb/qs-rgb.ewd new file mode 100644 index 0000000..7a32408 --- /dev/null +++ b/boards/ek-tm4c123gxl/qs-rgb/qs-rgb.ewd @@ -0,0 +1,614 @@ +<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+ <fileVersion>1</fileVersion>
+ <configuration>
+ <name>Debug</name>
+ <toolchain>
+ <name>ARM</name>
+ </toolchain>
+ <debug>1</debug>
+ <settings>
+ <name>C-SPY</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>15</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CInput</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CEndian</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCVariant</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>MemOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MemFile</name>
+ <state>$TOOLKIT_DIR$\CONFIG\debugger\TexasInstruments\tm4c123gh6pm</state>
+ </option>
+ <option>
+ <name>RunToEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>RunToName</name>
+ <state>main</state>
+ </option>
+ <option>
+ <name>CExtraOptionsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCDDFArgumentProducer</name>
+ <state></state>
+ </option>
+ <option>
+ <name>OCDownloadSuppressDownload</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDownloadVerifyAll</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OCDynDriverList</name>
+ <state>LMIFTDI_ID</state>
+ </option>
+ <option>
+ <name>OCLastSavedByProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OCDownloadAttachToProgram</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FlashLoaders</name>
+ <state>,,,,(default),</state>
+ </option>
+ <option>
+ <name>UseFlashLoader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CLowLevel</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCBE8Slave</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ARMSIM_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCSimDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCSimEnablePSP</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCSimPspOverrideConfig</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCSimPspConfigFile</name>
+ <state></state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ANGEL_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CCAngelHeartbeat</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CAngelCommunication</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CAngelCommBaud</name>
+ <version>0</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>CAngelCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ANGELTCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoAngelLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AngelLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>GDBSERVER_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>TCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>LogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCJTagBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>IARROM_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CRomLogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomLogFileEditB</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CRomCommunication</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomCommBaud</name>
+ <version>0</version>
+ <state>7</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>JLINK_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>9</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>JLinkSpeed</name>
+ <state>32</state>
+ </option>
+ <option>
+ <name>CCJLinkDoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCJLinkHWResetDelay</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>JLinkInitialSpeed</name>
+ <state>32</state>
+ </option>
+ <option>
+ <name>CCDoJlinkMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCScanChainNonARMDevices</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkIRLength</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkCommRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkTCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>CCJLinkSpeedRadioV2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCUSBDevice</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchUndef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchSWI</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchData</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchPrefetch</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchIRQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchFIQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ <option>
+ <name>CCJLinkInterfaceRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCJLinkAttachSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCJLinkResetList</name>
+ <version>0</version>
+ <state>5</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>LMIFTDI_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>LmiftdiSpeed</name>
+ <state>500</state>
+ </option>
+ <option>
+ <name>CCLmiftdiDoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCLmiftdiLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>MACRAIGOR_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>2</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>jtag</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>EmuSpeed</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>TCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>LogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>DoEmuMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>EmuMultiTarget</name>
+ <state>0@ARM7TDMI</state>
+ </option>
+ <option>
+ <name>EmuHWReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CEmuCommBaud</name>
+ <version>0</version>
+ <state>4</state>
+ </option>
+ <option>
+ <name>CEmuCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>jtago</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>UnusedAddr</name>
+ <state>0x00800000</state>
+ </option>
+ <option>
+ <name>CCMacraigorHWResetDelay</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCJTagBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>RDI_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CRDIDriverDll</name>
+ <state>Browse to your RDI driver</state>
+ </option>
+ <option>
+ <name>CRDILogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRDILogFileEdit</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCRDIHWReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchUndef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchSWI</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchData</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchPrefetch</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchIRQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchFIQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDIUseETM</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>THIRDPARTY_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CThirdPartyDriverDll</name>
+ <state>Browse to your third-party driver</state>
+ </option>
+ <option>
+ <name>CThirdPartyLogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CThirdPartyLogFileEditB</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <debuggerPlugins>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\OSE\OseEpsilonPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Profiling\Profiling.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ </debuggerPlugins>
+ </configuration>
+</project>
diff --git a/boards/ek-tm4c123gxl/qs-rgb/qs-rgb.ewp b/boards/ek-tm4c123gxl/qs-rgb/qs-rgb.ewp new file mode 100644 index 0000000..180e3d7 --- /dev/null +++ b/boards/ek-tm4c123gxl/qs-rgb/qs-rgb.ewp @@ -0,0 +1,808 @@ +<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+ <fileVersion>1</fileVersion>
+ <configuration>
+ <name>Debug</name>
+ <toolchain>
+ <name>ARM</name>
+ </toolchain>
+ <debug>1</debug>
+ <settings>
+ <name>General</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <version>14</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>ExePath</name>
+ <state>ewarm\Exe</state>
+ </option>
+ <option>
+ <name>ObjPath</name>
+ <state>ewarm\Obj</state>
+ </option>
+ <option>
+ <name>ListPath</name>
+ <state>ewarm\List</state>
+ </option>
+ <option>
+ <name>Variant</name>
+ <version>19</version>
+ <state>39</state>
+ </option>
+ <option>
+ <name>GEndianMode</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>Input variant</name>
+ <version>1</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>Input description</name>
+ <state>No specifier n, no float nor long long, no scan set, no assignment suppressing.</state>
+ </option>
+ <option>
+ <name>Output variant</name>
+ <version>0</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>Output description</name>
+ <state>No specifier a, A, no specifier n, no float nor long long, no flags.</state>
+ </option>
+ <option>
+ <name>GOutputBinary</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FPU</name>
+ <version>2</version>
+ <state>5</state>
+ </option>
+ <option>
+ <name>OGCoreOrChip</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelect</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelectSlave</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>RTDescription</name>
+ <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+ </option>
+ <option>
+ <name>RTConfigPath</name>
+ <state>$TOOLKIT_DIR$\INC\DLib_Config_Normal.h</state>
+ </option>
+ <option>
+ <name>OGProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OGLastSavedByProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>GeneralMisraRules</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>GeneralEnableMisra</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GeneralMisraVerbose</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGChipSelectEditMenu</name>
+ <state>TM4C123GH6PM TexasInstruments TM4C123GH6PM</state>
+ </option>
+ <option>
+ <name>GenLowLevelInterface</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GEndianModeBE</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OGBufferedTerminalOutput</name>
+ <state>0</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ICCARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>19</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CCDefines</name>
+ <state>ewarm</state>
+ <state>PART_TM4C123GH6PM</state>
+ <state>TARGET_IS_TM4C123_RB1</state>
+ <state>UART_BUFFERED</state>
+ </option>
+ <option>
+ <name>CCPreprocFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocComments</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMnemonics</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMessages</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssSource</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagSuppress</name>
+ <state>Pa050</state>
+ </option>
+ <option>
+ <name>CCDiagRemark</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCDiagWarning</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCDiagError</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCAllowList</name>
+ <version>1</version>
+ <state>1111111</state>
+ </option>
+ <option>
+ <name>CCDebugInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IEndianMode</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IExtraOptionsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCLangConformance</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCSignedPlainChar</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCRequirePrototypes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagWarnAreErr</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCCompilerRuntimeInfo</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OutputFile</name>
+ <state>$FILE_BNAME$.o</state>
+ </option>
+ <option>
+ <name>CCLangSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCLibConfigHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>PreInclude</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CompilerMisraRules</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>CompilerMisraOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCIncludePath2</name>
+ <state>$PROJ_DIR$\..</state>
+ <state>$PROJ_DIR$\..\..\..\..</state>
+ </option>
+ <option>
+ <name>CCStdIncCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCStdIncludePath</name>
+ <state>$TOOLKIT_DIR$\INC\</state>
+ </option>
+ <option>
+ <name>CCCodeSection</name>
+ <state>.text</state>
+ </option>
+ <option>
+ <name>IInterwork2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IProcessorMode2</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptLevel</name>
+ <state>3</state>
+ </option>
+ <option>
+ <name>CCOptStrategy</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptLevelSlave</name>
+ <state>3</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>AARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>7</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>AObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AEndian</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>ACaseSensitivity</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacroChars</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnEnable</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnWhat</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnOne</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AWarnRange1</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AWarnRange2</name>
+ <state></state>
+ </option>
+ <option>
+ <name>ADebug</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AltRegisterNames</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ADefines</name>
+ <state>ewarm</state>
+ </option>
+ <option>
+ <name>AList</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AListHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AListing</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>Includes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacDefs</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacExps</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacExec</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OnlyAssed</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MultiLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLengthCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLength</name>
+ <state>80</state>
+ </option>
+ <option>
+ <name>TabSpacing</name>
+ <state>8</state>
+ </option>
+ <option>
+ <name>AXRef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDefines</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefInternal</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDual</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AOutputFile</name>
+ <state>$FILE_BNAME$.o</state>
+ </option>
+ <option>
+ <name>AMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ALimitErrorsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ALimitErrorsEdit</name>
+ <state>100</state>
+ </option>
+ <option>
+ <name>AIgnoreStdInclude</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AStdIncludes</name>
+ <state>$TOOLKIT_DIR$\INC\</state>
+ </option>
+ <option>
+ <name>AUserIncludes</name>
+ <state>$PROJ_DIR$\..</state>
+ <state>$PROJ_DIR$\..\..\..\..</state>
+ </option>
+ <option>
+ <name>AExtraOptionsCheckV2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AExtraOptionsV2</name>
+ <state></state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>OBJCOPY</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OOCOutputFormat</name>
+ <version>1</version>
+ <state>2</state>
+ </option>
+ <option>
+ <name>OCOutputOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OOCOutputFile</name>
+ <state>qs-rgb.bin</state>
+ </option>
+ <option>
+ <name>OOCCommandLineProducer</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OOCObjCopyEnable</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>CUSTOM</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <extensions></extensions>
+ <cmdline></cmdline>
+ </data>
+ </settings>
+ <settings>
+ <name>BICOMP</name>
+ <archiveVersion>0</archiveVersion>
+ <data/>
+ </settings>
+ <settings>
+ <name>BUILDACTION</name>
+ <archiveVersion>1</archiveVersion>
+ <data>
+ <prebuild></prebuild>
+ <postbuild></postbuild>
+ </data>
+ </settings>
+ <settings>
+ <name>ILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>5</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>IlinkLibIOConfig</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>XLinkMisraHandler</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkInputFileSlave</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkOutputFile</name>
+ <state>qs-rgb.out</state>
+ </option>
+ <option>
+ <name>IlinkDebugInfoEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkKeepSymbols</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinaryFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinarySymbol</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinarySegment</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinaryAlign</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkDefines</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkConfigDefines</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkMapFile</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkLogFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogInitialization</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogModule</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogSection</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogVeneer</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkIcfOverride</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkIcfFile</name>
+ <state>$PROJ_DIR$\qs-rgb.icf</state>
+ </option>
+ <option>
+ <name>IlinkIcfFileSlave</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkSuppressDiags</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsRem</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsWarn</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsErr</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkWarningsAreErrors</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkUseExtraOptions</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkLowLevelInterfaceSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAutoLibEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAdditionalLibs</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkOverrideProgramEntryLabel</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabelSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabel</name>
+ <state>__iar_program_start</state>
+ </option>
+ <option>
+ <name>IlinkNXPLPCChecksum</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>DoFill</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FillerByte</name>
+ <state>0xFF</state>
+ </option>
+ <option>
+ <name>FillerStart</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>FillerEnd</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>CrcSize</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcAlign</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcAlgo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcPoly</name>
+ <state>0x11021</state>
+ </option>
+ <option>
+ <name>CrcCompl</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcBitOrder</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcInitialValue</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>DoCrc</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkBE8Slave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkBufferedTerminalOutput</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>IARCHIVE</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>IarchiveInputs</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IarchiveOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IarchiveOutput</name>
+ <state>###Unitialized###</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>BILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data/>
+ </settings>
+ </configuration>
+ <group>
+ <name>Libraries</name>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\driverlib\ewarm\Exe\driverlib.a</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\usblib\ewarm\Exe\usblib.a</name>
+ </file>
+ </group>
+ <group>
+ <name>Source</name>
+ <file>
+ <name>$PROJ_DIR$\..\drivers\buttons.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\utils\cmdline.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\qs-rgb.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\drivers\rgb.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\rgb_commands.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\startup_ewarm.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\utils\uartstdio.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\utils\ustdlib.c</name>
+ </file>
+ </group>
+</project>
diff --git a/boards/ek-tm4c123gxl/qs-rgb/qs-rgb.h b/boards/ek-tm4c123gxl/qs-rgb/qs-rgb.h new file mode 100644 index 0000000..a14bc39 --- /dev/null +++ b/boards/ek-tm4c123gxl/qs-rgb/qs-rgb.h @@ -0,0 +1,90 @@ +//*****************************************************************************
+//
+// qs-rgb.h - EK-TM4C123GXL Quick Start Application
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+
+
+//*****************************************************************************
+//
+// Globally defined constants
+//
+//*****************************************************************************
+#define APP_SYSTICKS_PER_SEC 32
+#define APP_BUTTON_POLL_DIVIDER 8
+#define APP_NUM_MANUAL_COLORS 7
+#define APP_PI 3.1415926535897932384626433832795f
+#define APP_AUTO_COLOR_STEP (APP_PI/ 48.0f)
+#define APP_INTENSITY_DEFAULT 0.3f
+#define APP_AUTO_MODE_TIMEOUT (APP_SYSTICKS_PER_SEC * 3)
+#define APP_HIB_BUTTON_DEBOUNCE (APP_SYSTICKS_PER_SEC * 3)
+#define APP_HIB_FLASH_DURATION 2
+
+#define APP_MODE_NORMAL 0
+#define APP_MODE_HIB 1
+#define APP_MODE_HIB_FLASH 2
+#define APP_MODE_AUTO 3
+#define APP_MODE_REMOTE 4
+
+#define APP_INPUT_BUF_SIZE 128
+
+//*****************************************************************************
+//
+// Structure typedef to make storing application state data to and from the
+// hibernate battery backed memory simpler.
+// ui32Colors: [R, G, B] range is 0 to 0xFFFF per color.
+// ui32Mode: The current application mode, system state variable.
+// ui32Buttons: bit map representation of buttons being pressed
+// ui32ManualIndex: Control variable for manual color increment/decrement
+// fColorWheelPos: Control variable to govern color mixing
+// fIntensity: Control variable to govern overall brightness of LED
+//
+//*****************************************************************************
+typedef struct
+{
+ uint32_t ui32Colors[3];
+ uint32_t ui32Mode;
+ uint32_t ui32Buttons;
+ uint32_t ui32ManualIndex;
+ uint32_t ui32ModeTimer;
+ float fColorWheelPos;
+ float fIntensity;
+
+}tAppState;
+
+//*****************************************************************************
+//
+// Global variables originally defined in qs-rgb.c that are made available to
+// functions in other files.
+//
+//*****************************************************************************
+extern volatile tAppState g_sAppState;
+
+//*****************************************************************************
+//
+// Functions defined in qs-rgb.c that are made available to other files.
+//
+//*****************************************************************************
+extern void AppButtonHandler(void);
+extern void AppRainbow(uint32_t ui32ForceUpdate);
+extern void AppHibernateEnter(void);
+
diff --git a/boards/ek-tm4c123gxl/qs-rgb/qs-rgb.icf b/boards/ek-tm4c123gxl/qs-rgb/qs-rgb.icf new file mode 100644 index 0000000..e012436 --- /dev/null +++ b/boards/ek-tm4c123gxl/qs-rgb/qs-rgb.icf @@ -0,0 +1,78 @@ +//*****************************************************************************
+//
+// qs-rgb.icf - Linker configuration file for qs-rgb.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+//
+// Define a memory region that covers the entire 4 GB addressible space of the
+// processor.
+//
+define memory mem with size = 4G;
+
+//
+// Define a region for the on-chip flash.
+//
+define region FLASH = mem:[from 0x00000000 to 0x0003ffff];
+
+//
+// Define a region for the on-chip SRAM.
+//
+define region SRAM = mem:[from 0x20000000 to 0x20007fff];
+
+//
+// Define a block for the heap. The size should be set to something other
+// than zero if things in the C library that require the heap are used.
+//
+define block HEAP with alignment = 8, size = 0x00000000 { };
+
+//
+// Indicate that the read/write values should be initialized by copying from
+// flash.
+//
+initialize by copy { readwrite };
+
+//
+// Indicate that the noinit values should be left alone. This includes the
+// stack, which if initialized will destroy the return address from the
+// initialization code, causing the processor to branch to zero and fault.
+//
+do not initialize { section .noinit };
+
+//
+// Place the interrupt vectors at the start of flash.
+//
+place at start of FLASH { readonly section .intvec };
+
+//
+// Place the remainder of the read-only items into flash.
+//
+place in FLASH { readonly };
+
+//
+// Place the RAM vector table at the start of SRAM.
+//
+place at start of SRAM { section VTABLE };
+
+//
+// Place all read/write items into SRAM.
+//
+place in SRAM { readwrite, block HEAP };
diff --git a/boards/ek-tm4c123gxl/qs-rgb/qs-rgb.ld b/boards/ek-tm4c123gxl/qs-rgb/qs-rgb.ld new file mode 100644 index 0000000..1de41dd --- /dev/null +++ b/boards/ek-tm4c123gxl/qs-rgb/qs-rgb.ld @@ -0,0 +1,57 @@ +/******************************************************************************
+ *
+ * qs-rgb.ld - Linker configuration file for qs-rgb.
+ *
+ * Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+ * Software License Agreement
+ *
+ * Texas Instruments (TI) is supplying this software for use solely and
+ * exclusively on TI's microcontroller products. The software is owned by
+ * TI and/or its suppliers, and is protected under applicable copyright
+ * laws. You may not combine this software with "viral" open-source
+ * software in order to form a larger program.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+ * NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+ * NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+ * CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+ * DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ * This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+ *
+ *****************************************************************************/
+
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x00040000
+ SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000
+}
+
+SECTIONS
+{
+ .text :
+ {
+ _text = .;
+ KEEP(*(.isr_vector))
+ *(.text*)
+ *(.rodata*)
+ _etext = .;
+ } > FLASH
+
+ .data : AT(ADDR(.text) + SIZEOF(.text))
+ {
+ _data = .;
+ *(vtable)
+ *(.data*)
+ _edata = .;
+ } > SRAM
+
+ .bss :
+ {
+ _bss = .;
+ *(.bss*)
+ *(COMMON)
+ _ebss = .;
+ } > SRAM
+}
diff --git a/boards/ek-tm4c123gxl/qs-rgb/qs-rgb.sct b/boards/ek-tm4c123gxl/qs-rgb/qs-rgb.sct new file mode 100644 index 0000000..7dd5ab3 --- /dev/null +++ b/boards/ek-tm4c123gxl/qs-rgb/qs-rgb.sct @@ -0,0 +1,47 @@ +;******************************************************************************
+;
+; qs-rgb.sct - Linker configuration file for qs-rgb.
+;
+; Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+; Software License Agreement
+;
+; Texas Instruments (TI) is supplying this software for use solely and
+; exclusively on TI's microcontroller products. The software is owned by
+; TI and/or its suppliers, and is protected under applicable copyright
+; laws. You may not combine this software with "viral" open-source
+; software in order to form a larger program.
+;
+; THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+; NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+; NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+; A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+; CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+; DAMAGES, FOR ANY REASON WHATSOEVER.
+;
+; This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+;
+;******************************************************************************
+
+LR_IROM 0x00000000 0x00040000
+{
+ ;
+ ; Specify the Execution Address of the code and the size.
+ ;
+ ER_IROM 0x00000000 0x00040000
+ {
+ *.o (RESET, +First)
+ * (InRoot$$Sections, +RO)
+ }
+
+ ;
+ ; Specify the Execution Address of the data area.
+ ;
+ RW_IRAM 0x20000000 0x00008000
+ {
+ ;
+ ; Uncomment the following line in order to use IntRegister().
+ ;
+ ;* (vtable, +First)
+ * (+RW, +ZI)
+ }
+}
diff --git a/boards/ek-tm4c123gxl/qs-rgb/qs-rgb.uvopt b/boards/ek-tm4c123gxl/qs-rgb/qs-rgb.uvopt new file mode 100644 index 0000000..05f3396 --- /dev/null +++ b/boards/ek-tm4c123gxl/qs-rgb/qs-rgb.uvopt @@ -0,0 +1,387 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+ <SchemaVersion>1.0</SchemaVersion>
+
+ <Header>### uVision Project, (C) Keil Software</Header>
+
+ <Extensions>
+ <cExt>*.c</cExt>
+ <aExt>*.s*; *.src; *.a*</aExt>
+ <oExt>*.obj</oExt>
+ <lExt>*.lib</lExt>
+ <tExt>*.txt; *.h; *.inc</tExt>
+ <pExt>*.plm</pExt>
+ <CppX>*.cpp</CppX>
+ </Extensions>
+
+ <DaveTm>
+ <dwLowDateTime>0</dwLowDateTime>
+ <dwHighDateTime>0</dwHighDateTime>
+ </DaveTm>
+
+ <Target>
+ <TargetName>qs-rgb</TargetName>
+ <ToolsetNumber>0x4</ToolsetNumber>
+ <ToolsetName>ARM-ADS</ToolsetName>
+ <TargetOption>
+ <CLKADS>8000000</CLKADS>
+ <OPTTT>
+ <gFlags>1</gFlags>
+ <BeepAtEnd>1</BeepAtEnd>
+ <RunSim>1</RunSim>
+ <RunTarget>0</RunTarget>
+ </OPTTT>
+ <OPTHX>
+ <HexSelection>1</HexSelection>
+ <FlashByte>65535</FlashByte>
+ <HexRangeLowAddress>0</HexRangeLowAddress>
+ <HexRangeHighAddress>0</HexRangeHighAddress>
+ <HexOffset>0</HexOffset>
+ </OPTHX>
+ <OPTLEX>
+ <PageWidth>79</PageWidth>
+ <PageLength>66</PageLength>
+ <TabStop>8</TabStop>
+ <ListingPath>.\rvmdk\</ListingPath>
+ </OPTLEX>
+ <ListingPage>
+ <CreateCListing>1</CreateCListing>
+ <CreateAListing>1</CreateAListing>
+ <CreateLListing>1</CreateLListing>
+ <CreateIListing>0</CreateIListing>
+ <AsmCond>1</AsmCond>
+ <AsmSymb>1</AsmSymb>
+ <AsmXref>0</AsmXref>
+ <CCond>1</CCond>
+ <CCode>0</CCode>
+ <CListInc>0</CListInc>
+ <CSymb>0</CSymb>
+ <LinkerCodeListing>0</LinkerCodeListing>
+ </ListingPage>
+ <OPTXL>
+ <LMap>1</LMap>
+ <LComments>1</LComments>
+ <LGenerateSymbols>1</LGenerateSymbols>
+ <LLibSym>1</LLibSym>
+ <LLines>1</LLines>
+ <LLocSym>1</LLocSym>
+ <LPubSym>1</LPubSym>
+ <LXref>0</LXref>
+ <LExpSel>0</LExpSel>
+ </OPTXL>
+ <OPTFL>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <IsCurrentTarget>1</IsCurrentTarget>
+ </OPTFL>
+ <CpuCode>255</CpuCode>
+ <Books>
+ <Book>
+ <Number>0</Number>
+ <Title>Data Sheet</Title>
+ <Path>DATASHTS\Luminary\TM4C123GH6PM.PDF</Path>
+ </Book>
+ </Books>
+ <DllOpt>
+ <SimDllName>SARMCM3.DLL</SimDllName>
+ <SimDllArguments>-MPU</SimDllArguments>
+ <SimDlgDllName>DCM.DLL</SimDlgDllName>
+ <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+ <TargetDllName>SARMCM3.DLL</TargetDllName>
+ <TargetDllArguments>-MPU</TargetDllArguments>
+ <TargetDlgDllName>TCM.DLL</TargetDlgDllName>
+ <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+ </DllOpt>
+ <DebugOpt>
+ <uSim>0</uSim>
+ <uTrg>1</uTrg>
+ <sLdApp>1</sLdApp>
+ <sGomain>1</sGomain>
+ <sRbreak>1</sRbreak>
+ <sRwatch>1</sRwatch>
+ <sRmem>1</sRmem>
+ <sRfunc>1</sRfunc>
+ <sRbox>1</sRbox>
+ <tLdApp>1</tLdApp>
+ <tGomain>0</tGomain>
+ <tRbreak>1</tRbreak>
+ <tRwatch>1</tRwatch>
+ <tRmem>1</tRmem>
+ <tRfunc>0</tRfunc>
+ <tRbox>1</tRbox>
+ <sRunDeb>0</sRunDeb>
+ <sLrtime>0</sLrtime>
+ <nTsel>4</nTsel>
+ <sDll></sDll>
+ <sDllPa></sDllPa>
+ <sDlgDll></sDlgDll>
+ <sDlgPa></sDlgPa>
+ <sIfile></sIfile>
+ <tDll></tDll>
+ <tDllPa></tDllPa>
+ <tDlgDll></tDlgDll>
+ <tDlgPa></tDlgPa>
+ <tIfile></tIfile>
+ <pMon>BIN\lmidk-agdi.dll</pMon>
+ </DebugOpt>
+ <TargetDriverDllRegistry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>lmidk-agdi</Key>
+ <Name>-O4614 -S3 -FO29</Name>
+ </SetRegEntry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>DLGTARM</Key>
+ <Name></Name>
+ </SetRegEntry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>ARMDBGFLAGS</Key>
+ <Name></Name>
+ </SetRegEntry>
+ </TargetDriverDllRegistry>
+ <DebugFlag>
+ <trace>0</trace>
+ <periodic>1</periodic>
+ <aLwin>0</aLwin>
+ <aCover>0</aCover>
+ <aSer1>0</aSer1>
+ <aSer2>0</aSer2>
+ <aPa>0</aPa>
+ <viewmode>1</viewmode>
+ <vrSel>0</vrSel>
+ <aSym>0</aSym>
+ <aTbox>0</aTbox>
+ <AscS1>0</AscS1>
+ <AscS2>0</AscS2>
+ <AscS3>0</AscS3>
+ <aSer3>0</aSer3>
+ <eProf>0</eProf>
+ <aLa>0</aLa>
+ <aPa1>0</aPa1>
+ <AscS4>0</AscS4>
+ <aSer4>0</aSer4>
+ <StkLoc>0</StkLoc>
+ <TrcWin>0</TrcWin>
+ <newCpu>0</newCpu>
+ <uProt>0</uProt>
+ </DebugFlag>
+ <LintExecutable></LintExecutable>
+ <LintConfigFile></LintConfigFile>
+ </TargetOption>
+ </Target>
+
+ <Group>
+ <GroupName>Source</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>1</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\drivers\buttons.c</PathWithFileName>
+ <FilenameWithoutPath>buttons.c</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>2</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\utils\cmdline.c</PathWithFileName>
+ <FilenameWithoutPath>cmdline.c</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>3</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\qs-rgb.c</PathWithFileName>
+ <FilenameWithoutPath>qs-rgb.c</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>4</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\drivers\rgb.c</PathWithFileName>
+ <FilenameWithoutPath>rgb.c</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>5</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\rgb_commands.c</PathWithFileName>
+ <FilenameWithoutPath>rgb_commands.c</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>6</FileNumber>
+ <FileType>2</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\startup_rvmdk.S</PathWithFileName>
+ <FilenameWithoutPath>startup_rvmdk.S</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>7</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\utils\uartstdio.c</PathWithFileName>
+ <FilenameWithoutPath>uartstdio.c</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>8</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\utils\ustdlib.c</PathWithFileName>
+ <FilenameWithoutPath>ustdlib.c</FilenameWithoutPath>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>Libraries</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>9</FileNumber>
+ <FileType>4</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\driverlib\rvmdk\driverlib.lib</PathWithFileName>
+ <FilenameWithoutPath>driverlib.lib</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>10</FileNumber>
+ <FileType>4</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\usblib\rvmdk\usblib.lib</PathWithFileName>
+ <FilenameWithoutPath>usblib.lib</FilenameWithoutPath>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>Documentation</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>3</GroupNumber>
+ <FileNumber>11</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <Focus>1</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>1</TopLine>
+ <CurrentLine>1</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\readme.txt</PathWithFileName>
+ <FilenameWithoutPath>readme.txt</FilenameWithoutPath>
+ <WindowPosition>
+ <length>44</length>
+ <flags>0</flags>
+ <showCmd>1</showCmd>
+ <MinPosition>
+ <xPos>-1</xPos>
+ <yPos>-1</yPos>
+ </MinPosition>
+ <MaxPosition>
+ <xPos>-1</xPos>
+ <yPos>-1</yPos>
+ </MaxPosition>
+ <NormalPosition>
+ <Top>0</Top>
+ <Left>0</Left>
+ <Right>729</Right>
+ <Bottom>300</Bottom>
+ </NormalPosition>
+ </WindowPosition>
+ </File>
+ </Group>
+
+ <MDIGroups>
+ <Orientation>1</Orientation>
+ <ActiveMDIGroup>0</ActiveMDIGroup>
+ <MDIGroup>
+ <Size>100</Size>
+ <ActiveTab>0</ActiveTab>
+ <Documents>
+ <Doc>
+ <Name>.\readme.txt</Name>
+ <ColumnNumber>0</ColumnNumber>
+ <TopLine>1</TopLine>
+ <CurrentLine>1</CurrentLine>
+ </Doc>
+ </Documents>
+ </MDIGroup>
+ </MDIGroups>
+
+</ProjectOpt>
diff --git a/boards/ek-tm4c123gxl/qs-rgb/qs-rgb.uvproj b/boards/ek-tm4c123gxl/qs-rgb/qs-rgb.uvproj new file mode 100644 index 0000000..8d5dd73 --- /dev/null +++ b/boards/ek-tm4c123gxl/qs-rgb/qs-rgb.uvproj @@ -0,0 +1,459 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+ <SchemaVersion>1.1</SchemaVersion>
+
+ <Header>### uVision Project, (C) Keil Software</Header>
+
+ <Targets>
+ <Target>
+ <TargetName>qs-rgb</TargetName>
+ <ToolsetNumber>0x4</ToolsetNumber>
+ <ToolsetName>ARM-ADS</ToolsetName>
+ <TargetOption>
+ <TargetCommonOption>
+ <Device>TM4C123GH6PM</Device>
+ <Vendor>Texas Instruments</Vendor>
+ <Cpu>IRAM(0x20000000-0x20007FFF) IROM(0-0x3FFFF) CLOCK(8000000) CPUTYPE("Cortex-M4") FPU2</Cpu>
+ <FlashUtilSpec></FlashUtilSpec>
+ <StartupFile>"STARTUP\Luminary\Startup.s" ("Luminary Startup Code")</StartupFile>
+ <FlashDriverDll>UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0LM4F_256 -FS00 -FL040000)</FlashDriverDll>
+ <DeviceId>5919</DeviceId>
+ <RegisterFile>LM4Fxxxx.H</RegisterFile>
+ <MemoryEnv></MemoryEnv>
+ <Cmp></Cmp>
+ <Asm></Asm>
+ <Linker></Linker>
+ <OHString></OHString>
+ <InfinionOptionDll></InfinionOptionDll>
+ <SLE66CMisc></SLE66CMisc>
+ <SLE66AMisc></SLE66AMisc>
+ <SLE66LinkerMisc></SLE66LinkerMisc>
+ <UseEnv>0</UseEnv>
+ <BinPath></BinPath>
+ <IncludePath></IncludePath>
+ <LibPath></LibPath>
+ <RegisterFilePath>Luminary\</RegisterFilePath>
+ <DBRegisterFilePath>Luminary\</DBRegisterFilePath>
+ <TargetStatus>
+ <Error>0</Error>
+ <ExitCodeStop>0</ExitCodeStop>
+ <ButtonStop>0</ButtonStop>
+ <NotGenerated>0</NotGenerated>
+ <InvalidFlash>1</InvalidFlash>
+ </TargetStatus>
+ <OutputDirectory>.\rvmdk\</OutputDirectory>
+ <OutputName>qs-rgb</OutputName>
+ <CreateExecutable>1</CreateExecutable>
+ <CreateLib>0</CreateLib>
+ <CreateHexFile>0</CreateHexFile>
+ <DebugInformation>1</DebugInformation>
+ <BrowseInformation>1</BrowseInformation>
+ <ListingPath>.\rvmdk\</ListingPath>
+ <HexFormatSelection>1</HexFormatSelection>
+ <Merge32K>0</Merge32K>
+ <CreateBatchFile>0</CreateBatchFile>
+ <BeforeCompile>
+ <RunUserProg1>0</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name></UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </BeforeCompile>
+ <BeforeMake>
+ <RunUserProg1>0</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name></UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </BeforeMake>
+ <AfterMake>
+ <RunUserProg1>1</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name>fromelf --bin --output .\rvmdk\qs-rgb.bin .\rvmdk\qs-rgb.axf</UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </AfterMake>
+ <SelectedForBatchBuild>0</SelectedForBatchBuild>
+ <SVCSIdString></SVCSIdString>
+ </TargetCommonOption>
+ <CommonProperty>
+ <UseCPPCompiler>0</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <DllOption>
+ <SimDllName>SARMCM3.DLL</SimDllName>
+ <SimDllArguments>-MPU</SimDllArguments>
+ <SimDlgDll>DCM.DLL</SimDlgDll>
+ <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+ <TargetDllName>SARMCM3.DLL</TargetDllName>
+ <TargetDllArguments>-MPU</TargetDllArguments>
+ <TargetDlgDll>TCM.DLL</TargetDlgDll>
+ <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+ </DllOption>
+ <DebugOption>
+ <OPTHX>
+ <HexSelection>1</HexSelection>
+ <HexRangeLowAddress>0</HexRangeLowAddress>
+ <HexRangeHighAddress>0</HexRangeHighAddress>
+ <HexOffset>0</HexOffset>
+ <Oh166RecLen>16</Oh166RecLen>
+ </OPTHX>
+ <Simulator>
+ <UseSimulator>0</UseSimulator>
+ <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+ <RunToMain>1</RunToMain>
+ <RestoreBreakpoints>1</RestoreBreakpoints>
+ <RestoreWatchpoints>1</RestoreWatchpoints>
+ <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+ <RestoreFunctions>1</RestoreFunctions>
+ <RestoreToolbox>1</RestoreToolbox>
+ <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+ </Simulator>
+ <Target>
+ <UseTarget>1</UseTarget>
+ <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+ <RunToMain>0</RunToMain>
+ <RestoreBreakpoints>1</RestoreBreakpoints>
+ <RestoreWatchpoints>1</RestoreWatchpoints>
+ <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+ <RestoreFunctions>0</RestoreFunctions>
+ <RestoreToolbox>1</RestoreToolbox>
+ </Target>
+ <RunDebugAfterBuild>0</RunDebugAfterBuild>
+ <TargetSelection>4</TargetSelection>
+ <SimDlls>
+ <CpuDll></CpuDll>
+ <CpuDllArguments></CpuDllArguments>
+ <PeripheralDll></PeripheralDll>
+ <PeripheralDllArguments></PeripheralDllArguments>
+ <InitializationFile></InitializationFile>
+ </SimDlls>
+ <TargetDlls>
+ <CpuDll></CpuDll>
+ <CpuDllArguments></CpuDllArguments>
+ <PeripheralDll></PeripheralDll>
+ <PeripheralDllArguments></PeripheralDllArguments>
+ <InitializationFile></InitializationFile>
+ <Driver>BIN\lmidk-agdi.dll</Driver>
+ </TargetDlls>
+ </DebugOption>
+ <Utilities>
+ <Flash1>
+ <UseTargetDll>1</UseTargetDll>
+ <UseExternalTool>0</UseExternalTool>
+ <RunIndependent>0</RunIndependent>
+ <UpdateFlashBeforeDebugging>0</UpdateFlashBeforeDebugging>
+ <Capability>1</Capability>
+ <DriverSelection>4099</DriverSelection>
+ </Flash1>
+ <Flash2>BIN\lmidk-agdi.dll</Flash2>
+ <Flash3></Flash3>
+ <Flash4></Flash4>
+ </Utilities>
+ <TargetArmAds>
+ <ArmAdsMisc>
+ <GenerateListings>0</GenerateListings>
+ <asHll>1</asHll>
+ <asAsm>1</asAsm>
+ <asMacX>1</asMacX>
+ <asSyms>1</asSyms>
+ <asFals>1</asFals>
+ <asDbgD>1</asDbgD>
+ <asForm>1</asForm>
+ <ldLst>0</ldLst>
+ <ldmm>1</ldmm>
+ <ldXref>1</ldXref>
+ <BigEnd>0</BigEnd>
+ <AdsALst>0</AdsALst>
+ <AdsACrf>0</AdsACrf>
+ <AdsANop>0</AdsANop>
+ <AdsANot>0</AdsANot>
+ <AdsLLst>1</AdsLLst>
+ <AdsLmap>1</AdsLmap>
+ <AdsLcgr>1</AdsLcgr>
+ <AdsLsym>1</AdsLsym>
+ <AdsLszi>1</AdsLszi>
+ <AdsLtoi>1</AdsLtoi>
+ <AdsLsun>1</AdsLsun>
+ <AdsLven>1</AdsLven>
+ <AdsLsxf>1</AdsLsxf>
+ <RvctClst>0</RvctClst>
+ <GenPPlst>0</GenPPlst>
+ <AdsCpuType>"Cortex-M4"</AdsCpuType>
+ <RvctDeviceName></RvctDeviceName>
+ <mOS>0</mOS>
+ <uocRom>0</uocRom>
+ <uocRam>0</uocRam>
+ <hadIROM>1</hadIROM>
+ <hadIRAM>1</hadIRAM>
+ <hadXRAM>0</hadXRAM>
+ <uocXRam>0</uocXRam>
+ <RvdsVP>2</RvdsVP>
+ <hadIRAM2>0</hadIRAM2>
+ <hadIROM2>0</hadIROM2>
+ <StupSel>8</StupSel>
+ <useUlib>1</useUlib>
+ <EndSel>0</EndSel>
+ <uLtcg>0</uLtcg>
+ <RoSelD>3</RoSelD>
+ <RwSelD>3</RwSelD>
+ <CodeSel>0</CodeSel>
+ <OptFeed>0</OptFeed>
+ <NoZi1>0</NoZi1>
+ <NoZi2>0</NoZi2>
+ <NoZi3>0</NoZi3>
+ <NoZi4>0</NoZi4>
+ <NoZi5>0</NoZi5>
+ <Ro1Chk>0</Ro1Chk>
+ <Ro2Chk>0</Ro2Chk>
+ <Ro3Chk>0</Ro3Chk>
+ <Ir1Chk>1</Ir1Chk>
+ <Ir2Chk>0</Ir2Chk>
+ <Ra1Chk>0</Ra1Chk>
+ <Ra2Chk>0</Ra2Chk>
+ <Ra3Chk>0</Ra3Chk>
+ <Im1Chk>1</Im1Chk>
+ <Im2Chk>0</Im2Chk>
+ <OnChipMemories>
+ <Ocm1>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm1>
+ <Ocm2>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm2>
+ <Ocm3>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm3>
+ <Ocm4>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm4>
+ <Ocm5>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm5>
+ <Ocm6>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm6>
+ <IRAM>
+ <Type>0</Type>
+ <StartAddress>0x20000000</StartAddress>
+ <Size>0x8000</Size>
+ </IRAM>
+ <IROM>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x40000</Size>
+ </IROM>
+ <XRAM>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </XRAM>
+ <OCR_RVCT1>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT1>
+ <OCR_RVCT2>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT2>
+ <OCR_RVCT3>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT3>
+ <OCR_RVCT4>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x40000</Size>
+ </OCR_RVCT4>
+ <OCR_RVCT5>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT5>
+ <OCR_RVCT6>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT6>
+ <OCR_RVCT7>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT7>
+ <OCR_RVCT8>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT8>
+ <OCR_RVCT9>
+ <Type>0</Type>
+ <StartAddress>0x20000000</StartAddress>
+ <Size>0x8000</Size>
+ </OCR_RVCT9>
+ <OCR_RVCT10>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT10>
+ </OnChipMemories>
+ <RvctStartVector></RvctStartVector>
+ </ArmAdsMisc>
+ <Cads>
+ <interw>0</interw>
+ <Optim>3</Optim>
+ <oTime>0</oTime>
+ <SplitLS>0</SplitLS>
+ <OneElfS>1</OneElfS>
+ <Strict>0</Strict>
+ <EnumInt>0</EnumInt>
+ <PlainCh>0</PlainCh>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <wLevel>2</wLevel>
+ <uThumb>0</uThumb>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define>rvmdk PART_TM4C123GH6PM TARGET_IS_TM4C123_RB1 UART_BUFFERED</Define>
+ <Undefine></Undefine>
+ <IncludePath>..;..\..\..\..;</IncludePath>
+ </VariousControls>
+ </Cads>
+ <Aads>
+ <interw>1</interw>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <thumb>0</thumb>
+ <SplitLS>0</SplitLS>
+ <SwStkChk>0</SwStkChk>
+ <NoWarn>0</NoWarn>
+ <VariousControls>
+ <MiscControls></MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Aads>
+ <LDads>
+ <umfTarg>0</umfTarg>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <noStLib>0</noStLib>
+ <RepFail>1</RepFail>
+ <useFile>0</useFile>
+ <TextAddressRange>0x00000000</TextAddressRange>
+ <DataAddressRange>0x20000000</DataAddressRange>
+ <ScatterFile>qs-rgb.sct</ScatterFile>
+ <IncludeLibs></IncludeLibs>
+ <IncludeLibsPath></IncludeLibsPath>
+ <Misc>--entry Reset_Handler</Misc>
+ <LinkerInputFile></LinkerInputFile>
+ <DisabledWarnings></DisabledWarnings>
+ </LDads>
+ </TargetArmAds>
+ </TargetOption>
+ <Groups>
+ <Group>
+ <GroupName>Source</GroupName>
+ <Files>
+ <File>
+ <FileName>buttons.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>..\drivers\buttons.c</FilePath>
+ </File>
+ <File>
+ <FileName>cmdline.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>..\..\..\..\utils\cmdline.c</FilePath>
+ </File>
+ <File>
+ <FileName>qs-rgb.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>.\qs-rgb.c</FilePath>
+ </File>
+ <File>
+ <FileName>rgb.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>..\drivers\rgb.c</FilePath>
+ </File>
+ <File>
+ <FileName>rgb_commands.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>.\rgb_commands.c</FilePath>
+ </File>
+ <File>
+ <FileName>startup_rvmdk.S</FileName>
+ <FileType>2</FileType>
+ <FilePath>.\startup_rvmdk.S</FilePath>
+ </File>
+ <File>
+ <FileName>uartstdio.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>..\..\..\..\utils\uartstdio.c</FilePath>
+ </File>
+ <File>
+ <FileName>ustdlib.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>..\..\..\..\utils\ustdlib.c</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>Libraries</GroupName>
+ <Files>
+ <File>
+ <FileName>driverlib.lib</FileName>
+ <FileType>4</FileType>
+ <FilePath>..\..\..\..\driverlib\rvmdk\driverlib.lib</FilePath>
+ </File>
+ <File>
+ <FileName>usblib.lib</FileName>
+ <FileType>4</FileType>
+ <FilePath>..\..\..\..\usblib\rvmdk\usblib.lib</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>Documentation</GroupName>
+ <Files>
+ <File>
+ <FileName>readme.txt</FileName>
+ <FileType>5</FileType>
+ <FilePath>.\readme.txt</FilePath>
+ </File>
+ </Files>
+ </Group>
+ </Groups>
+ </Target>
+ </Targets>
+
+</Project>
diff --git a/boards/ek-tm4c123gxl/qs-rgb/qs-rgb_ccs.cmd b/boards/ek-tm4c123gxl/qs-rgb/qs-rgb_ccs.cmd new file mode 100644 index 0000000..1e0d912 --- /dev/null +++ b/boards/ek-tm4c123gxl/qs-rgb/qs-rgb_ccs.cmd @@ -0,0 +1,70 @@ +/******************************************************************************
+ *
+ * qs-rgb_ccs.cmd - CCS linker configuration file for qs-rgb.
+ *
+ * Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+ * Software License Agreement
+ *
+ * Texas Instruments (TI) is supplying this software for use solely and
+ * exclusively on TI's microcontroller products. The software is owned by
+ * TI and/or its suppliers, and is protected under applicable copyright
+ * laws. You may not combine this software with "viral" open-source
+ * software in order to form a larger program.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+ * NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+ * NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+ * CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+ * DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ * This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+ *
+ *****************************************************************************/
+
+--retain=g_pfnVectors
+
+/* The following command line options are set as part of the CCS project. */
+/* If you are building using the command line, or for some reason want to */
+/* define them here, you can uncomment and modify these lines as needed. */
+/* If you are using CCS for building, it is probably better to make any such */
+/* modifications in your CCS project and leave this file alone. */
+/* */
+/* --heap_size=0 */
+/* --stack_size=256 */
+/* --library=rtsv7M3_T_le_eabi.lib */
+
+/* The starting address of the application. Normally the interrupt vectors */
+/* must be located at the beginning of the application. */
+#define APP_BASE 0x00000000
+#define RAM_BASE 0x20000000
+
+/* System memory map */
+
+MEMORY
+{
+ /* Application stored in and executes from internal flash */
+ FLASH (RX) : origin = APP_BASE, length = 0x00040000
+ /* Application uses internal RAM for data */
+ SRAM (RWX) : origin = 0x20000000, length = 0x00008000
+}
+
+/* Section allocation in memory */
+
+SECTIONS
+{
+ .intvecs: > APP_BASE
+ .text : > FLASH
+ .const : > FLASH
+ .cinit : > FLASH
+ .pinit : > FLASH
+ .init_array : > FLASH
+
+ .vtable : > RAM_BASE
+ .data : > SRAM
+ .bss : > SRAM
+ .sysmem : > SRAM
+ .stack : > SRAM
+}
+
+__STACK_TOP = __stack + 2048;
diff --git a/boards/ek-tm4c123gxl/qs-rgb/readme.txt b/boards/ek-tm4c123gxl/qs-rgb/readme.txt new file mode 100644 index 0000000..1bf22e9 --- /dev/null +++ b/boards/ek-tm4c123gxl/qs-rgb/readme.txt @@ -0,0 +1,47 @@ +EK-TM4C123GXL Quickstart Application
+
+A demonstration of the Tiva C Series LaunchPad (EK-TM4C123GXL)
+capabilities.
+
+Press and/or hold the left button to traverse towards the red end of the
+ROYGBIV color spectrum. Press and/or hold the right button to traverse
+toward the violet end of the ROYGBIV color spectrum.
+
+If no input is received for 5 seconds, the application will start
+automatically changing the color displayed.
+
+Press and hold both left and right buttons for 3 seconds to enter
+hibernation. During hibernation, the last color displayed will blink
+for 0.5 seconds every 3 seconds.
+
+The system can also be controlled via a command line provided via the UART.
+Configure your host terminal emulator for 115200, 8-N-1 to access this
+feature.
+
+- Command 'help' generates a list of commands and helpful information.
+- Command 'hib' will place the device into hibernation mode.
+- Command 'rand' will initiate the pseudo-random color sequence.
+- Command 'intensity' followed by a number between 0 and 100 will set the
+brightness of the LED as a percentage of maximum brightness.
+- Command 'rgb' followed by a six character hex value will set the color.
+For example 'rgb FF0000' will produce a red color.
+
+-------------------------------------------------------------------------------
+
+Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+Software License Agreement
+
+Texas Instruments (TI) is supplying this software for use solely and
+exclusively on TI's microcontroller products. The software is owned by
+TI and/or its suppliers, and is protected under applicable copyright
+laws. You may not combine this software with "viral" open-source
+software in order to form a larger program.
+
+THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+DAMAGES, FOR ANY REASON WHATSOEVER.
+
+This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
diff --git a/boards/ek-tm4c123gxl/qs-rgb/rgb_commands.c b/boards/ek-tm4c123gxl/qs-rgb/rgb_commands.c new file mode 100644 index 0000000..2285f63 --- /dev/null +++ b/boards/ek-tm4c123gxl/qs-rgb/rgb_commands.c @@ -0,0 +1,223 @@ +//*****************************************************************************
+//
+// rgb_commands.c - Command line functionality implementation
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "qs-rgb.h"
+#include "drivers/rgb.h"
+#include "inc/hw_types.h"
+#include "utils/ustdlib.h"
+#include "utils/uartstdio.h"
+#include "utils/cmdline.h"
+#include "rgb_commands.h"
+
+//*****************************************************************************
+//
+// Table of valid command strings, callback functions and help messages. This
+// is used by the cmdline module.
+//
+//*****************************************************************************
+tCmdLineEntry g_psCmdTable[] =
+{
+ {"help", CMD_help, " : Display list of commands" },
+ {"hib", CMD_hib, " : Place system into hibernate mode"},
+ {"rand", CMD_rand, " : Start automatic color sequencing"},
+ {"intensity",CMD_intensity, " : Adjust brightness 0 to 100 percent"},
+ {"rgb", CMD_rgb, " : Adjust color 000000-FFFFFF HTML notation"},
+ { 0, 0, 0 }
+};
+
+//*****************************************************************************
+//
+// Command: help
+//
+// Print the help strings for all commands.
+//
+//*****************************************************************************
+int
+CMD_help(int argc, char **argv)
+{
+ int32_t i32Index;
+
+ (void)argc;
+ (void)argv;
+
+ //
+ // Start at the beginning of the command table
+ //
+ i32Index = 0;
+
+ //
+ // Get to the start of a clean line on the serial output.
+ //
+ UARTprintf("\nAvailable Commands\n------------------\n\n");
+
+ //
+ // Display strings until we run out of them.
+ //
+ while(g_psCmdTable[i32Index].pcCmd)
+ {
+ UARTprintf("%17s %s\n", g_psCmdTable[i32Index].pcCmd,
+ g_psCmdTable[i32Index].pcHelp);
+ i32Index++;
+ }
+
+ //
+ // Leave a blank line after the help strings.
+ //
+ UARTprintf("\n");
+
+ return (0);
+}
+
+//*****************************************************************************
+//
+// Command: hib
+//
+// Force the device into hibernate mode now.
+//
+//*****************************************************************************
+int
+CMD_hib(int argc, char **argv)
+{
+ //
+ // Keep the compiler happy.
+ //
+ (void)argc;
+ (void)argv;
+
+ //
+ // Enter hibernate state.
+ //
+ AppHibernateEnter();
+
+ return (0);
+}
+
+//*****************************************************************************
+//
+// Command: rand
+//
+// Starts the automatic light sequence immediately.
+//
+//*****************************************************************************
+int
+CMD_rand(int argc, char **argv)
+{
+ //
+ // Keep the compiler happy.
+ //
+ (void)argc;
+ (void)argv;
+
+ //
+ // Turn on automatic mode.
+ //
+ g_sAppState.ui32Mode = APP_MODE_AUTO;
+
+ return (0);
+}
+
+//*****************************************************************************
+//
+// Command: intensity
+//
+// Takes a single argument that is between zero and one hundred. The argument
+// must be an integer. This is interpreted as the percentage of maximum
+// brightness with which to display the current color.
+//
+//*****************************************************************************
+int
+CMD_intensity(int argc, char **argv)
+{
+ uint32_t ui32Intensity;
+
+ //
+ // This command requires one parameter.
+ //
+ if(argc == 2)
+ {
+ //
+ // Extract the intensity from the command line parameter.
+ //
+ ui32Intensity = ustrtoul(argv[1], 0, 10);
+
+ //
+ // Convert the value to a fractional floating point value.
+ //
+ g_sAppState.fIntensity = ((float) ui32Intensity) / 100.0f;
+
+ //
+ // Set the intensity of the RGB LED.
+ //
+ RGBIntensitySet(g_sAppState.fIntensity);
+ }
+
+ return(0);
+
+}
+
+//*****************************************************************************
+//
+// Command: rgb
+//
+// Takes a single argument that is a string between 000000 and FFFFFF.
+// This is the HTML color code that should be used to set the RGB LED color.
+//
+// http://www.w3schools.com/html/html_colors.asp
+//
+//*****************************************************************************
+int
+CMD_rgb(int argc, char **argv)
+{
+ uint32_t ui32HTMLColor;
+
+ //
+ // This command requires one parameter.
+ //
+ if(argc == 2)
+ {
+ //
+ // Extract the required color from the command line parameter.
+ //
+ ui32HTMLColor = ustrtoul(argv[1], 0, 16);
+
+ //
+ // Decompose teh color into red, green and blue components.
+ //
+ g_sAppState.ui32Colors[RED] = (ui32HTMLColor & 0xFF0000) >> 8;
+ g_sAppState.ui32Colors[GREEN] = (ui32HTMLColor & 0x00FF00);
+ g_sAppState.ui32Colors[BLUE] = (ui32HTMLColor & 0x0000FF) << 8;
+
+ //
+ // Turn off automatic mode and set the desired LED color.
+ //
+ g_sAppState.ui32Mode = APP_MODE_REMOTE;
+ g_sAppState.ui32ModeTimer = 0;
+ RGBColorSet(g_sAppState.ui32Colors);
+ }
+
+ return (0);
+
+}
diff --git a/boards/ek-tm4c123gxl/qs-rgb/rgb_commands.h b/boards/ek-tm4c123gxl/qs-rgb/rgb_commands.h new file mode 100644 index 0000000..3e9764d --- /dev/null +++ b/boards/ek-tm4c123gxl/qs-rgb/rgb_commands.h @@ -0,0 +1,51 @@ +//*****************************************************************************
+//
+// rgb_commands.h - Prototypes for the evaluation board command line utils.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#ifndef __RGB_COMMANDS_H__
+#define __RGB_COMMANDS_H__
+
+//*****************************************************************************
+//
+// Defines for the command line argument parser provided as a standard part of
+// TivaWare. qs-rgb application uses the command line parser to extend
+// functionality to the serial port.
+//
+//*****************************************************************************
+
+#define CMDLINE_MAX_ARGS 3
+
+//*****************************************************************************
+//
+// Declaration for the callback functions that will implement the command line
+// functionality. These functions get called by the command line interpreter
+// when the corresponding command is typed into the command line.
+//
+//*****************************************************************************
+extern int CMD_help (int argc, char **argv);
+extern int CMD_hib (int argc, char **argv);
+extern int CMD_rand (int argc, char **argv);
+extern int CMD_intensity (int argc, char **argv);
+extern int CMD_rgb (int argc, char **argv);
+
+#endif //__RGB_COMMANDS_H__
diff --git a/boards/ek-tm4c123gxl/qs-rgb/rvmdk/qs-rgb.axf b/boards/ek-tm4c123gxl/qs-rgb/rvmdk/qs-rgb.axf Binary files differnew file mode 100644 index 0000000..f455c32 --- /dev/null +++ b/boards/ek-tm4c123gxl/qs-rgb/rvmdk/qs-rgb.axf diff --git a/boards/ek-tm4c123gxl/qs-rgb/rvmdk/qs-rgb.bin b/boards/ek-tm4c123gxl/qs-rgb/rvmdk/qs-rgb.bin Binary files differnew file mode 100644 index 0000000..14c4792 --- /dev/null +++ b/boards/ek-tm4c123gxl/qs-rgb/rvmdk/qs-rgb.bin diff --git a/boards/ek-tm4c123gxl/qs-rgb/startup_ccs.c b/boards/ek-tm4c123gxl/qs-rgb/startup_ccs.c new file mode 100644 index 0000000..12e237b --- /dev/null +++ b/boards/ek-tm4c123gxl/qs-rgb/startup_ccs.c @@ -0,0 +1,303 @@ +//*****************************************************************************
+//
+// startup_ccs.c - Startup code for use with TI's Code Composer Studio.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// External declaration for the reset handler that is to be called when the
+// processor is started
+//
+//*****************************************************************************
+extern void _c_int00(void);
+
+//*****************************************************************************
+//
+// Linker variable that marks the top of the stack.
+//
+//*****************************************************************************
+extern uint32_t __STACK_TOP;
+
+//*****************************************************************************
+//
+// External declarations for the interrupt handlers used by the application.
+//
+//*****************************************************************************
+extern void SysTickIntHandler(void);
+extern void UARTStdioIntHandler(void);
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000 or at the start of
+// the program if located at a start address other than 0.
+//
+//*****************************************************************************
+#pragma DATA_SECTION(g_pfnVectors, ".intvecs")
+void (* const g_pfnVectors[])(void) =
+{
+ (void (*)(void))((uint32_t)&__STACK_TOP),
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ SysTickIntHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ UARTStdioIntHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ IntDefaultHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ //
+ // Jump to the CCS C initialization routine. This will enable the
+ // floating-point unit as well, so that does not need to be done here.
+ //
+ __asm(" .global _c_int00\n"
+ " b.w _c_int00");
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/qs-rgb/startup_ewarm.c b/boards/ek-tm4c123gxl/qs-rgb/startup_ewarm.c new file mode 100644 index 0000000..edd6cb5 --- /dev/null +++ b/boards/ek-tm4c123gxl/qs-rgb/startup_ewarm.c @@ -0,0 +1,334 @@ +//*****************************************************************************
+//
+// startup_ewarm.c - Startup code for use with IAR's Embedded Workbench,
+// version 5.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Enable the IAR extensions for this source file.
+//
+//*****************************************************************************
+#pragma language=extended
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// External declarations for the interrupt handlers used by the application.
+//
+//*****************************************************************************
+extern void SysTickIntHandler(void);
+extern void UARTStdioIntHandler(void);
+
+//*****************************************************************************
+//
+// The entry point for the application startup code.
+//
+//*****************************************************************************
+extern void __iar_program_start(void);
+
+//*****************************************************************************
+//
+// Reserve space for the system stack.
+//
+//*****************************************************************************
+static uint32_t pui32Stack[512] @ ".noinit";
+
+//*****************************************************************************
+//
+// A union that describes the entries of the vector table. The union is needed
+// since the first entry is the stack pointer and the remainder are function
+// pointers.
+//
+//*****************************************************************************
+typedef union
+{
+ void (*pfnHandler)(void);
+ uint32_t ui32Ptr;
+}
+uVectorEntry;
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000.
+//
+//*****************************************************************************
+__root const uVectorEntry __vector_table[] @ ".intvec" =
+{
+ { .ui32Ptr = (uint32_t)pui32Stack + sizeof(pui32Stack) },
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ SysTickIntHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ UARTStdioIntHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ IntDefaultHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ //
+ // Enable the floating-point unit. This must be done here to handle the
+ // case where main() uses floating-point and the function prologue saves
+ // floating-point registers (which will fault if floating-point is not
+ // enabled). Any configuration of the floating-point unit using DriverLib
+ // APIs must be done here prior to the floating-point unit being enabled.
+ //
+ // Note that this does not use DriverLib since it might not be included in
+ // this project.
+ //
+ HWREG(NVIC_CPAC) = ((HWREG(NVIC_CPAC) &
+ ~(NVIC_CPAC_CP10_M | NVIC_CPAC_CP11_M)) |
+ NVIC_CPAC_CP10_FULL | NVIC_CPAC_CP11_FULL);
+
+ //
+ // Call the application's entry point.
+ //
+ __iar_program_start();
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/qs-rgb/startup_gcc.c b/boards/ek-tm4c123gxl/qs-rgb/startup_gcc.c new file mode 100644 index 0000000..cf343d5 --- /dev/null +++ b/boards/ek-tm4c123gxl/qs-rgb/startup_gcc.c @@ -0,0 +1,350 @@ +//*****************************************************************************
+//
+// startup_gcc.c - Startup code for use with GNU tools.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// External declarations for the interrupt handlers used by the application.
+//
+//*****************************************************************************
+extern void SysTickIntHandler(void);
+extern void UARTStdioIntHandler(void);
+
+//*****************************************************************************
+//
+// The entry point for the application.
+//
+//*****************************************************************************
+extern int main(void);
+
+//*****************************************************************************
+//
+// Reserve space for the system stack.
+//
+//*****************************************************************************
+static uint32_t pui32Stack[512];
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000.
+//
+//*****************************************************************************
+__attribute__ ((section(".isr_vector")))
+void (* const g_pfnVectors[])(void) =
+{
+ (void (*)(void))((uint32_t)pui32Stack + sizeof(pui32Stack)),
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ SysTickIntHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ UARTStdioIntHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ IntDefaultHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// The following are constructs created by the linker, indicating where the
+// the "data" and "bss" segments reside in memory. The initializers for the
+// for the "data" segment resides immediately following the "text" segment.
+//
+//*****************************************************************************
+extern uint32_t _etext;
+extern uint32_t _data;
+extern uint32_t _edata;
+extern uint32_t _bss;
+extern uint32_t _ebss;
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ uint32_t *pui32Src, *pui32Dest;
+
+ //
+ // Copy the data segment initializers from flash to SRAM.
+ //
+ pui32Src = &_etext;
+ for(pui32Dest = &_data; pui32Dest < &_edata; )
+ {
+ *pui32Dest++ = *pui32Src++;
+ }
+
+ //
+ // Zero fill the bss segment.
+ //
+ __asm(" ldr r0, =_bss\n"
+ " ldr r1, =_ebss\n"
+ " mov r2, #0\n"
+ " .thumb_func\n"
+ "zero_loop:\n"
+ " cmp r0, r1\n"
+ " it lt\n"
+ " strlt r2, [r0], #4\n"
+ " blt zero_loop");
+
+ //
+ // Enable the floating-point unit. This must be done here to handle the
+ // case where main() uses floating-point and the function prologue saves
+ // floating-point registers (which will fault if floating-point is not
+ // enabled). Any configuration of the floating-point unit using DriverLib
+ // APIs must be done here prior to the floating-point unit being enabled.
+ //
+ // Note that this does not use DriverLib since it might not be included in
+ // this project.
+ //
+ HWREG(NVIC_CPAC) = ((HWREG(NVIC_CPAC) &
+ ~(NVIC_CPAC_CP10_M | NVIC_CPAC_CP11_M)) |
+ NVIC_CPAC_CP10_FULL | NVIC_CPAC_CP11_FULL);
+
+ //
+ // Call the application's entry point.
+ //
+ main();
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/qs-rgb/startup_rvmdk.S b/boards/ek-tm4c123gxl/qs-rgb/startup_rvmdk.S new file mode 100644 index 0000000..f7ba113 --- /dev/null +++ b/boards/ek-tm4c123gxl/qs-rgb/startup_rvmdk.S @@ -0,0 +1,359 @@ +; <<< Use Configuration Wizard in Context Menu >>>
+;******************************************************************************
+;
+; startup_rvmdk.S - Startup code for use with Keil's uVision.
+;
+; Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+; Software License Agreement
+;
+; Texas Instruments (TI) is supplying this software for use solely and
+; exclusively on TI's microcontroller products. The software is owned by
+; TI and/or its suppliers, and is protected under applicable copyright
+; laws. You may not combine this software with "viral" open-source
+; software in order to form a larger program.
+;
+; THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+; NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+; NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+; A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+; CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+; DAMAGES, FOR ANY REASON WHATSOEVER.
+;
+; This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+;
+;******************************************************************************
+
+;******************************************************************************
+;
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+;******************************************************************************
+Stack EQU 0x00000800
+
+;******************************************************************************
+;
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+;******************************************************************************
+Heap EQU 0x00000000
+
+;******************************************************************************
+;
+; Allocate space for the stack.
+;
+;******************************************************************************
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+StackMem
+ SPACE Stack
+__initial_sp
+
+;******************************************************************************
+;
+; Allocate space for the heap.
+;
+;******************************************************************************
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+HeapMem
+ SPACE Heap
+__heap_limit
+
+;******************************************************************************
+;
+; Indicate that the code in this file preserves 8-byte alignment of the stack.
+;
+;******************************************************************************
+ PRESERVE8
+
+;******************************************************************************
+;
+; Place code into the reset code section.
+;
+;******************************************************************************
+ AREA RESET, CODE, READONLY
+ THUMB
+
+;******************************************************************************
+;
+; External declarations for the interrupt handlers used by the application.
+;
+;******************************************************************************
+ EXTERN SysTickIntHandler
+ EXTERN UARTStdioIntHandler
+
+;******************************************************************************
+;
+; The vector table.
+;
+;******************************************************************************
+ EXPORT __Vectors
+__Vectors
+ DCD StackMem + Stack ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NmiSR ; NMI Handler
+ DCD FaultISR ; Hard Fault Handler
+ DCD IntDefaultHandler ; The MPU fault handler
+ DCD IntDefaultHandler ; The bus fault handler
+ DCD IntDefaultHandler ; The usage fault handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; SVCall handler
+ DCD IntDefaultHandler ; Debug monitor handler
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; The PendSV handler
+ DCD SysTickIntHandler ; The SysTick handler
+ DCD IntDefaultHandler ; GPIO Port A
+ DCD IntDefaultHandler ; GPIO Port B
+ DCD IntDefaultHandler ; GPIO Port C
+ DCD IntDefaultHandler ; GPIO Port D
+ DCD IntDefaultHandler ; GPIO Port E
+ DCD UARTStdioIntHandler ; UART0 Rx and Tx
+ DCD IntDefaultHandler ; UART1 Rx and Tx
+ DCD IntDefaultHandler ; SSI0 Rx and Tx
+ DCD IntDefaultHandler ; I2C0 Master and Slave
+ DCD IntDefaultHandler ; PWM Fault
+ DCD IntDefaultHandler ; PWM Generator 0
+ DCD IntDefaultHandler ; PWM Generator 1
+ DCD IntDefaultHandler ; PWM Generator 2
+ DCD IntDefaultHandler ; Quadrature Encoder 0
+ DCD IntDefaultHandler ; ADC Sequence 0
+ DCD IntDefaultHandler ; ADC Sequence 1
+ DCD IntDefaultHandler ; ADC Sequence 2
+ DCD IntDefaultHandler ; ADC Sequence 3
+ DCD IntDefaultHandler ; Watchdog timer
+ DCD IntDefaultHandler ; Timer 0 subtimer A
+ DCD IntDefaultHandler ; Timer 0 subtimer B
+ DCD IntDefaultHandler ; Timer 1 subtimer A
+ DCD IntDefaultHandler ; Timer 1 subtimer B
+ DCD IntDefaultHandler ; Timer 2 subtimer A
+ DCD IntDefaultHandler ; Timer 2 subtimer B
+ DCD IntDefaultHandler ; Analog Comparator 0
+ DCD IntDefaultHandler ; Analog Comparator 1
+ DCD IntDefaultHandler ; Analog Comparator 2
+ DCD IntDefaultHandler ; System Control (PLL, OSC, BO)
+ DCD IntDefaultHandler ; FLASH Control
+ DCD IntDefaultHandler ; GPIO Port F
+ DCD IntDefaultHandler ; GPIO Port G
+ DCD IntDefaultHandler ; GPIO Port H
+ DCD IntDefaultHandler ; UART2 Rx and Tx
+ DCD IntDefaultHandler ; SSI1 Rx and Tx
+ DCD IntDefaultHandler ; Timer 3 subtimer A
+ DCD IntDefaultHandler ; Timer 3 subtimer B
+ DCD IntDefaultHandler ; I2C1 Master and Slave
+ DCD IntDefaultHandler ; Quadrature Encoder 1
+ DCD IntDefaultHandler ; CAN0
+ DCD IntDefaultHandler ; CAN1
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; Hibernate
+ DCD IntDefaultHandler ; USB0
+ DCD IntDefaultHandler ; PWM Generator 3
+ DCD IntDefaultHandler ; uDMA Software Transfer
+ DCD IntDefaultHandler ; uDMA Error
+ DCD IntDefaultHandler ; ADC1 Sequence 0
+ DCD IntDefaultHandler ; ADC1 Sequence 1
+ DCD IntDefaultHandler ; ADC1 Sequence 2
+ DCD IntDefaultHandler ; ADC1 Sequence 3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; GPIO Port J
+ DCD IntDefaultHandler ; GPIO Port K
+ DCD IntDefaultHandler ; GPIO Port L
+ DCD IntDefaultHandler ; SSI2 Rx and Tx
+ DCD IntDefaultHandler ; SSI3 Rx and Tx
+ DCD IntDefaultHandler ; UART3 Rx and Tx
+ DCD IntDefaultHandler ; UART4 Rx and Tx
+ DCD IntDefaultHandler ; UART5 Rx and Tx
+ DCD IntDefaultHandler ; UART6 Rx and Tx
+ DCD IntDefaultHandler ; UART7 Rx and Tx
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; I2C2 Master and Slave
+ DCD IntDefaultHandler ; I2C3 Master and Slave
+ DCD IntDefaultHandler ; Timer 4 subtimer A
+ DCD IntDefaultHandler ; Timer 4 subtimer B
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; Timer 5 subtimer A
+ DCD IntDefaultHandler ; Timer 5 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 0 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 0 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 1 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 1 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 2 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 2 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 3 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 3 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 4 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 4 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 5 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 5 subtimer B
+ DCD IntDefaultHandler ; FPU
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; I2C4 Master and Slave
+ DCD IntDefaultHandler ; I2C5 Master and Slave
+ DCD IntDefaultHandler ; GPIO Port M
+ DCD IntDefaultHandler ; GPIO Port N
+ DCD IntDefaultHandler ; Quadrature Encoder 2
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; GPIO Port P (Summary or P0)
+ DCD IntDefaultHandler ; GPIO Port P1
+ DCD IntDefaultHandler ; GPIO Port P2
+ DCD IntDefaultHandler ; GPIO Port P3
+ DCD IntDefaultHandler ; GPIO Port P4
+ DCD IntDefaultHandler ; GPIO Port P5
+ DCD IntDefaultHandler ; GPIO Port P6
+ DCD IntDefaultHandler ; GPIO Port P7
+ DCD IntDefaultHandler ; GPIO Port Q (Summary or Q0)
+ DCD IntDefaultHandler ; GPIO Port Q1
+ DCD IntDefaultHandler ; GPIO Port Q2
+ DCD IntDefaultHandler ; GPIO Port Q3
+ DCD IntDefaultHandler ; GPIO Port Q4
+ DCD IntDefaultHandler ; GPIO Port Q5
+ DCD IntDefaultHandler ; GPIO Port Q6
+ DCD IntDefaultHandler ; GPIO Port Q7
+ DCD IntDefaultHandler ; GPIO Port R
+ DCD IntDefaultHandler ; GPIO Port S
+ DCD IntDefaultHandler ; PWM 1 Generator 0
+ DCD IntDefaultHandler ; PWM 1 Generator 1
+ DCD IntDefaultHandler ; PWM 1 Generator 2
+ DCD IntDefaultHandler ; PWM 1 Generator 3
+ DCD IntDefaultHandler ; PWM 1 Fault
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor first starts execution
+; following a reset event.
+;
+;******************************************************************************
+ EXPORT Reset_Handler
+Reset_Handler
+ ;
+ ; Enable the floating-point unit. This must be done here to handle the
+ ; case where main() uses floating-point and the function prologue saves
+ ; floating-point registers (which will fault if floating-point is not
+ ; enabled). Any configuration of the floating-point unit using
+ ; DriverLib APIs must be done here prior to the floating-point unit
+ ; being enabled.
+ ;
+ ; Note that this does not use DriverLib since it might not be included
+ ; in this project.
+ ;
+ MOVW R0, #0xED88
+ MOVT R0, #0xE000
+ LDR R1, [R0]
+ ORR R1, #0x00F00000
+ STR R1, [R0]
+
+ ;
+ ; Call the C library enty point that handles startup. This will copy
+ ; the .data section initializers from flash to SRAM and zero fill the
+ ; .bss section.
+ ;
+ IMPORT __main
+ B __main
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives a NMI. This
+; simply enters an infinite loop, preserving the system state for examination
+; by a debugger.
+;
+;******************************************************************************
+NmiSR
+ B NmiSR
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives a fault
+; interrupt. This simply enters an infinite loop, preserving the system state
+; for examination by a debugger.
+;
+;******************************************************************************
+FaultISR
+ B FaultISR
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives an unexpected
+; interrupt. This simply enters an infinite loop, preserving the system state
+; for examination by a debugger.
+;
+;******************************************************************************
+IntDefaultHandler
+ B IntDefaultHandler
+
+;******************************************************************************
+;
+; Make sure the end of this section is aligned.
+;
+;******************************************************************************
+ ALIGN
+
+;******************************************************************************
+;
+; Some code in the normal code section for initializing the heap and stack.
+;
+;******************************************************************************
+ AREA |.text|, CODE, READONLY
+
+;******************************************************************************
+;
+; The function expected of the C library startup code for defining the stack
+; and heap memory locations. For the C library version of the startup code,
+; provide this function so that the C library initialization code can find out
+; the location of the stack and heap.
+;
+;******************************************************************************
+ IF :DEF: __MICROLIB
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+ ELSE
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+__user_initial_stackheap
+ LDR R0, =HeapMem
+ LDR R1, =(StackMem + Stack)
+ LDR R2, =(HeapMem + Heap)
+ LDR R3, =StackMem
+ BX LR
+ ENDIF
+
+;******************************************************************************
+;
+; Make sure the end of this section is aligned.
+;
+;******************************************************************************
+ ALIGN
+
+;******************************************************************************
+;
+; Tell the assembler that we're done.
+;
+;******************************************************************************
+ END
diff --git a/boards/ek-tm4c123gxl/timers/Makefile b/boards/ek-tm4c123gxl/timers/Makefile new file mode 100644 index 0000000..c076d9f --- /dev/null +++ b/boards/ek-tm4c123gxl/timers/Makefile @@ -0,0 +1,85 @@ +#******************************************************************************
+#
+# Makefile - Rules for building the timers example.
+#
+# Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+# Software License Agreement
+#
+# Texas Instruments (TI) is supplying this software for use solely and
+# exclusively on TI's microcontroller products. The software is owned by
+# TI and/or its suppliers, and is protected under applicable copyright
+# laws. You may not combine this software with "viral" open-source
+# software in order to form a larger program.
+#
+# THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+# NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+# NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+# CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+# DAMAGES, FOR ANY REASON WHATSOEVER.
+#
+# This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+#
+#******************************************************************************
+
+#
+# Defines the part type that this project uses.
+#
+PART=TM4C123GH6PM
+
+#
+# The base directory for TivaWare.
+#
+ROOT=../../../..
+
+#
+# Include the common make definitions.
+#
+include ${ROOT}/makedefs
+
+#
+# Where to find source files that do not live in this directory.
+#
+VPATH=../../../../utils
+
+#
+# Where to find header files that do not live in the source directory.
+#
+IPATH=../../../..
+
+#
+# The default rule, which causes the timers example to be built.
+#
+all: ${COMPILER}
+all: ${COMPILER}/timers.axf
+
+#
+# The rule to clean out all the build products.
+#
+clean:
+ @rm -rf ${COMPILER} ${wildcard *~}
+
+#
+# The rule to create the target directory.
+#
+${COMPILER}:
+ @mkdir -p ${COMPILER}
+
+#
+# Rules for building the timers example.
+#
+${COMPILER}/timers.axf: ${COMPILER}/startup_${COMPILER}.o
+${COMPILER}/timers.axf: ${COMPILER}/timers.o
+${COMPILER}/timers.axf: ${COMPILER}/uartstdio.o
+${COMPILER}/timers.axf: ${ROOT}/driverlib/${COMPILER}/libdriver.a
+${COMPILER}/timers.axf: timers.ld
+SCATTERgcc_timers=timers.ld
+ENTRY_timers=ResetISR
+CFLAGSgcc=-DTARGET_IS_TM4C123_RB1
+
+#
+# Include the automatically generated dependency files.
+#
+ifneq (${MAKECMDGOALS},clean)
+-include ${wildcard ${COMPILER}/*.d} __dummy__
+endif
diff --git a/boards/ek-tm4c123gxl/timers/ccs/.ccsimportspec b/boards/ek-tm4c123gxl/timers/ccs/.ccsimportspec new file mode 100644 index 0000000..e61983c --- /dev/null +++ b/boards/ek-tm4c123gxl/timers/ccs/.ccsimportspec @@ -0,0 +1,8 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<importSpec>
+ <source root="..">
+ <file name="timers.c"/>
+ <file regex=".*_ccs\.cmd"/>
+ <file name="startup_ccs.c"/>
+ </source>
+</importSpec>
diff --git a/boards/ek-tm4c123gxl/timers/ccs/.ccsproject b/boards/ek-tm4c123gxl/timers/ccs/.ccsproject new file mode 100644 index 0000000..75fb50e --- /dev/null +++ b/boards/ek-tm4c123gxl/timers/ccs/.ccsproject @@ -0,0 +1,10 @@ +<?xml version="1.0" encoding="UTF-8" ?>
+<?ccsproject version="1.0"?>
+<projectOptions>
+ <deviceVariant value="Cortex M.TM4C123GH6PM"/>
+ <deviceFamily value="TMS470"/>
+ <deviceEndianness value="little"/>
+ <codegenToolVersion value="5.0.4"/>
+ <isElfFormat value="true"/>
+ <rts value="libc.a"/>
+</projectOptions>
diff --git a/boards/ek-tm4c123gxl/timers/ccs/.cproject b/boards/ek-tm4c123gxl/timers/ccs/.cproject new file mode 100644 index 0000000..425134e --- /dev/null +++ b/boards/ek-tm4c123gxl/timers/ccs/.cproject @@ -0,0 +1,187 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+ <storageModule configRelations="2" moduleId="org.eclipse.cdt.core.settings">
+ <cconfiguration id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1937925267">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1937925267" moduleId="org.eclipse.cdt.core.settings" name="Debug">
+ <macros>
+ <stringMacro name="SW_ROOT" type="VALUE_PATH_DIR" value="${PROJECT_ROOT}/../../../../.."/>
+ </macros>
+ <externalSettings/>
+ <extensions>
+ <extension id="com.ti.ccstudio.binaryparser.CoffParser" point="org.eclipse.cdt.core.BinaryParser"/>
+ <extension id="com.ti.ccstudio.errorparser.CoffErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.LinkErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.AsmErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactExtension="out" artifactName="${ProjName}" buildProperties="" cleanCommand="${CG_CLEAN_CMD}" description="" id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1937925267" name="Debug" parent="com.ti.ccstudio.buildDefinitions.TMS470.Debug" postbuildStep=""${CCE_INSTALL_ROOT}/utils/tiobj2bin/tiobj2bin" "${BuildArtifactFileName}" "${BuildArtifactFileBaseName}.bin" "${CG_TOOL_ROOT}/bin/armofd" "${CG_TOOL_ROOT}/bin/armhex" "${CCE_INSTALL_ROOT}/utils/tiobj2bin/mkhex4bin"">
+ <folderInfo id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1937925267." name="/" resourcePath="">
+ <toolChain id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.DebugToolchain.314041823" name="TI Build Tools" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.DebugToolchain" targetTool="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug.1072295792">
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS.1734733014" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS" valueType="stringList">
+ <listOptionValue builtIn="false" value="DEVICE_CONFIGURATION_ID=Cortex M.TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="DEVICE_ENDIANNESS=little"/>
+ <listOptionValue builtIn="false" value="OUTPUT_FORMAT=ELF"/>
+ <listOptionValue builtIn="false" value="CCS_MBS_VERSION=5.1.0.01"/>
+ <listOptionValue builtIn="false" value="RUNTIME_SUPPORT_LIBRARY=libc.a"/>
+ <listOptionValue builtIn="false" value="OUTPUT_TYPE=executable"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION.1554773380" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION" value="5.0.4" valueType="string"/>
+ <targetPlatform id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformDebug.1910606492" name="Platform" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformDebug"/>
+ <builder buildPath="${BuildDirectory}" id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderDebug.1262053375" name="GNU Make.Debug" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderDebug"/>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerDebug.585145922" name="ARM Compiler" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerDebug">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.1611797368" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.7M4" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.1960286242" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.995360171" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.eabi" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.1565022467" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.FPv4SPD16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL.818324929" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL.SYMDEBUG__DWARF" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING.1021870881" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING" valueType="stringList">
+ <listOptionValue builtIn="false" value="225"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER.1665804787" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.179780525" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH.1537270530" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH" valueType="includePath">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN.493531585" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.1277424583" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.on" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL.582515807" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL.2" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC.526229461" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL.1575929785" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE.394525881" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE" valueType="definedSymbols">
+ <listOptionValue builtIn="false" value="ccs="ccs""/>
+ <listOptionValue builtIn="false" value="PART_TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="TARGET_IS_TM4C123_RB1"/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS.2130683258" name="C Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS.594818903" name="C++ Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS.1756016014" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS.1881208004" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS"/>
+ </tool>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug.1072295792" name="ARM Linker" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE.1183523502" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE" value=""timers_ccs.map"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE.1848441074" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE" value="256" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE.893287399" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE" value="0" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE.447816052" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE" value=""${ProjName}.out"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO.1064028038" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO" value=""${ProjName}_linkInfo.xml"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER.1706552687" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.247298370" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH.250748405" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH" valueType="libPaths">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/lib""/>
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY.1183513558" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY" valueType="libs">
+ <listOptionValue builtIn="false" value=""libc.a""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/driverlib/ccs/Debug/driverlib.lib""/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS.217595016" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS.633741779" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS.2027848670" name="Generated Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS"/>
+ </tool>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ <cconfiguration id="com.ti.ccstudio.buildDefinitions.TMS470.Release.496317736">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.ti.ccstudio.buildDefinitions.TMS470.Release.496317736" moduleId="org.eclipse.cdt.core.settings" name="Release">
+ <macros>
+ <stringMacro name="SW_ROOT" type="VALUE_PATH_DIR" value="${PROJECT_ROOT}/../../../../.."/>
+ </macros>
+ <externalSettings/>
+ <extensions>
+ <extension id="com.ti.ccstudio.binaryparser.CoffParser" point="org.eclipse.cdt.core.BinaryParser"/>
+ <extension id="com.ti.ccstudio.errorparser.CoffErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.LinkErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.AsmErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactExtension="out" artifactName="${ProjName}" buildProperties="" cleanCommand="${CG_CLEAN_CMD}" description="" id="com.ti.ccstudio.buildDefinitions.TMS470.Release.496317736" name="Release" parent="com.ti.ccstudio.buildDefinitions.TMS470.Release" postbuildStep=""${CCE_INSTALL_ROOT}/utils/tiobj2bin/tiobj2bin" "${BuildArtifactFileName}" "${BuildArtifactFileBaseName}.bin" "${CG_TOOL_ROOT}/bin/armofd" "${CG_TOOL_ROOT}/bin/armhex" "${CCE_INSTALL_ROOT}/utils/tiobj2bin/mkhex4bin"">
+ <folderInfo id="com.ti.ccstudio.buildDefinitions.TMS470.Release.496317736." name="/" resourcePath="">
+ <toolChain id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.ReleaseToolchain.1656003985" name="TI Build Tools" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.ReleaseToolchain" targetTool="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease.213463462">
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS.953569923" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS" valueType="stringList">
+ <listOptionValue builtIn="false" value="DEVICE_CONFIGURATION_ID=Cortex M.TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="DEVICE_ENDIANNESS=little"/>
+ <listOptionValue builtIn="false" value="OUTPUT_FORMAT=ELF"/>
+ <listOptionValue builtIn="false" value="CCS_MBS_VERSION=5.1.0.01"/>
+ <listOptionValue builtIn="false" value="RUNTIME_SUPPORT_LIBRARY=libc.a"/>
+ <listOptionValue builtIn="false" value="OUTPUT_TYPE=executable"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION.156554927" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION" value="5.0.4" valueType="string"/>
+ <targetPlatform id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformRelease.117869032" name="Platform" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformRelease"/>
+ <builder buildPath="${BuildDirectory}" id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderRelease.508187755" name="GNU Make.Release" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderRelease"/>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerRelease.1615953163" name="ARM Compiler" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerRelease">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.1627754213" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.7M4" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.1205849912" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.208719906" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.eabi" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.272995032" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.FPv4SPD16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING.902299934" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING" valueType="stringList">
+ <listOptionValue builtIn="false" value="225"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER.1182696343" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.1431895845" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH.1657626705" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH" valueType="includePath">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN.1020280132" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.1670505653" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.on" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC.2079338071" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL.1294160795" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE.1723721156" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE" valueType="definedSymbols">
+ <listOptionValue builtIn="false" value="ccs="ccs""/>
+ <listOptionValue builtIn="false" value="PART_TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="TARGET_IS_TM4C123_RB1"/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS.1806123112" name="C Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS.1689774215" name="C++ Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS.741195232" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS.1186625340" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS"/>
+ </tool>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease.213463462" name="ARM Linker" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE.218435947" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE" value=""timers_ccs.map"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE.2091289995" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE" value="256" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE.2080195590" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE" value="0" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE.1866146325" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE" value=""${ProjName}.out"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO.40847290" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO" value=""${ProjName}_linkInfo.xml"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER.1534416685" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.1878375678" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH.657454739" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH" valueType="libPaths">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/lib""/>
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY.2110601555" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY" valueType="libs">
+ <listOptionValue builtIn="false" value=""libc.a""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/driverlib/ccs/Debug/driverlib.lib""/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS.187497761" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS.2035445966" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS.839972320" name="Generated Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS"/>
+ </tool>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <project id="timers.com.ti.ccstudio.buildDefinitions.TMS470.ProjectType.1120467048" name="ARM" projectType="com.ti.ccstudio.buildDefinitions.TMS470.ProjectType"/>
+ </storageModule>
+ <storageModule moduleId="scannerConfiguration"/>
+ <storageModule moduleId="org.eclipse.cdt.core.language.mapping">
+ <project-mappings>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.asmSource" language="com.ti.ccstudio.core.TIASMLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cHeader" language="com.ti.ccstudio.core.TIGCCLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cSource" language="com.ti.ccstudio.core.TIGCCLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cxxHeader" language="com.ti.ccstudio.core.TIGPPLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cxxSource" language="com.ti.ccstudio.core.TIGPPLanguage"/>
+ </project-mappings>
+ </storageModule>
+</cproject>
diff --git a/boards/ek-tm4c123gxl/timers/ccs/.project b/boards/ek-tm4c123gxl/timers/ccs/.project new file mode 100644 index 0000000..4cfa87c --- /dev/null +++ b/boards/ek-tm4c123gxl/timers/ccs/.project @@ -0,0 +1,55 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+ <name>timers</name>
+ <comment></comment>
+ <projects>
+ </projects>
+ <buildSpec>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+ <triggers>full,incremental,</triggers>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ </buildSpec>
+ <natures>
+ <nature>com.ti.ccstudio.core.ccsNature</nature>
+ <nature>org.eclipse.cdt.core.cnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+ <nature>org.eclipse.cdt.core.ccnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+ </natures>
+ <linkedResources>
+ <link>
+ <name>startup_ccs.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/timers/startup_ccs.c</locationURI>
+ </link>
+ <link>
+ <name>timers.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/timers/timers.c</locationURI>
+ </link>
+ <link>
+ <name>timers_ccs.cmd</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/timers/timers_ccs.cmd</locationURI>
+ </link>
+ <link>
+ <name>utils/uartstdio.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/utils/uartstdio.c</locationURI>
+ </link>
+ </linkedResources>
+ <variableList>
+ <variable>
+ <name>SW_ROOT</name>
+ <value>$%7BPARENT-5-PROJECT_LOC%7D</value>
+ </variable>
+ </variableList>
+</projectDescription>
diff --git a/boards/ek-tm4c123gxl/timers/ccs/.settings/org.eclipse.cdt.codan.core.prefs b/boards/ek-tm4c123gxl/timers/ccs/.settings/org.eclipse.cdt.codan.core.prefs new file mode 100644 index 0000000..98b6350 --- /dev/null +++ b/boards/ek-tm4c123gxl/timers/ccs/.settings/org.eclipse.cdt.codan.core.prefs @@ -0,0 +1,3 @@ +eclipse.preferences.version=1
+inEditor=false
+onBuild=false
diff --git a/boards/ek-tm4c123gxl/timers/ccs/Debug/timers.bin b/boards/ek-tm4c123gxl/timers/ccs/Debug/timers.bin Binary files differnew file mode 100644 index 0000000..c729099 --- /dev/null +++ b/boards/ek-tm4c123gxl/timers/ccs/Debug/timers.bin diff --git a/boards/ek-tm4c123gxl/timers/ccs/Debug/timers.out b/boards/ek-tm4c123gxl/timers/ccs/Debug/timers.out Binary files differnew file mode 100644 index 0000000..aefc296 --- /dev/null +++ b/boards/ek-tm4c123gxl/timers/ccs/Debug/timers.out diff --git a/boards/ek-tm4c123gxl/timers/ccs/macros.ini_initial b/boards/ek-tm4c123gxl/timers/ccs/macros.ini_initial new file mode 100644 index 0000000..31214b5 --- /dev/null +++ b/boards/ek-tm4c123gxl/timers/ccs/macros.ini_initial @@ -0,0 +1 @@ +SW_ROOT = ../../../../..
diff --git a/boards/ek-tm4c123gxl/timers/ccs/target_config.ccxml b/boards/ek-tm4c123gxl/timers/ccs/target_config.ccxml new file mode 100644 index 0000000..be4342a --- /dev/null +++ b/boards/ek-tm4c123gxl/timers/ccs/target_config.ccxml @@ -0,0 +1,13 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<configurations XML_version="1.2" id="configurations_0">
+ <configuration XML_version="1.2" id="Stellaris In-Circuit Debug Interface_0">
+ <instance XML_version="1.2" desc="Stellaris In-Circuit Debug Interface_0" href="connections/Stellaris_ICDI_Connection.xml" id="Stellaris In-Circuit Debug Interface_0" xml="Stellaris_ICDI_Connection.xml" xmlpath="connections"/>
+ <connection XML_version="1.2" id="Stellaris In-Circuit Debug Interface_0">
+ <instance XML_version="1.2" href="drivers/stellaris_cs_dap.xml" id="drivers" xml="stellaris_cs_dap.xml" xmlpath="drivers"/>
+ <instance XML_version="1.2" href="drivers/stellaris_cortex_m4.xml" id="drivers" xml="stellaris_cortex_m4.xml" xmlpath="drivers"/>
+ <platform XML_version="1.2" id="platform_0">
+ <instance XML_version="1.2" desc="Stellaris TM4C123GH6PM_0" href="devices/tm4c123gh6pm.xml" id="Stellaris TM4C123GH6PM_0" xml="tm4c123gh6pm.xml" xmlpath="devices"/>
+ </platform>
+ </connection>
+ </configuration>
+</configurations>
diff --git a/boards/ek-tm4c123gxl/timers/ewarm/Exe/timers.bin b/boards/ek-tm4c123gxl/timers/ewarm/Exe/timers.bin Binary files differnew file mode 100644 index 0000000..af65930 --- /dev/null +++ b/boards/ek-tm4c123gxl/timers/ewarm/Exe/timers.bin diff --git a/boards/ek-tm4c123gxl/timers/ewarm/Exe/timers.out b/boards/ek-tm4c123gxl/timers/ewarm/Exe/timers.out Binary files differnew file mode 100644 index 0000000..4b4fbf3 --- /dev/null +++ b/boards/ek-tm4c123gxl/timers/ewarm/Exe/timers.out diff --git a/boards/ek-tm4c123gxl/timers/gcc/timers.axf b/boards/ek-tm4c123gxl/timers/gcc/timers.axf Binary files differnew file mode 100644 index 0000000..9b30d8d --- /dev/null +++ b/boards/ek-tm4c123gxl/timers/gcc/timers.axf diff --git a/boards/ek-tm4c123gxl/timers/gcc/timers.bin b/boards/ek-tm4c123gxl/timers/gcc/timers.bin Binary files differnew file mode 100644 index 0000000..d1a9080 --- /dev/null +++ b/boards/ek-tm4c123gxl/timers/gcc/timers.bin diff --git a/boards/ek-tm4c123gxl/timers/readme.txt b/boards/ek-tm4c123gxl/timers/readme.txt new file mode 100644 index 0000000..ff60685 --- /dev/null +++ b/boards/ek-tm4c123gxl/timers/readme.txt @@ -0,0 +1,29 @@ +Timer
+
+This example application demonstrates the use of the timers to generate
+periodic interrupts. One timer is set up to interrupt once per second and
+the other to interrupt twice per second; each interrupt handler will toggle
+its own indicator on the display.
+
+UART0, connected to the Virtual Serial Port and running at 115,200, 8-N-1,
+is used to display messages from this application.
+
+-------------------------------------------------------------------------------
+
+Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+Software License Agreement
+
+Texas Instruments (TI) is supplying this software for use solely and
+exclusively on TI's microcontroller products. The software is owned by
+TI and/or its suppliers, and is protected under applicable copyright
+laws. You may not combine this software with "viral" open-source
+software in order to form a larger program.
+
+THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+DAMAGES, FOR ANY REASON WHATSOEVER.
+
+This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
diff --git a/boards/ek-tm4c123gxl/timers/rvmdk/timers.axf b/boards/ek-tm4c123gxl/timers/rvmdk/timers.axf Binary files differnew file mode 100644 index 0000000..3ee2e53 --- /dev/null +++ b/boards/ek-tm4c123gxl/timers/rvmdk/timers.axf diff --git a/boards/ek-tm4c123gxl/timers/rvmdk/timers.bin b/boards/ek-tm4c123gxl/timers/rvmdk/timers.bin Binary files differnew file mode 100644 index 0000000..bd94e63 --- /dev/null +++ b/boards/ek-tm4c123gxl/timers/rvmdk/timers.bin diff --git a/boards/ek-tm4c123gxl/timers/startup_ccs.c b/boards/ek-tm4c123gxl/timers/startup_ccs.c new file mode 100644 index 0000000..bf0cb67 --- /dev/null +++ b/boards/ek-tm4c123gxl/timers/startup_ccs.c @@ -0,0 +1,303 @@ +//*****************************************************************************
+//
+// startup_ccs.c - Startup code for use with TI's Code Composer Studio.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// External declaration for the reset handler that is to be called when the
+// processor is started
+//
+//*****************************************************************************
+extern void _c_int00(void);
+
+//*****************************************************************************
+//
+// Linker variable that marks the top of the stack.
+//
+//*****************************************************************************
+extern uint32_t __STACK_TOP;
+
+//*****************************************************************************
+//
+// External declarations for the interrupt handlers used by the application.
+//
+//*****************************************************************************
+extern void Timer0IntHandler(void);
+extern void Timer1IntHandler(void);
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000 or at the start of
+// the program if located at a start address other than 0.
+//
+//*****************************************************************************
+#pragma DATA_SECTION(g_pfnVectors, ".intvecs")
+void (* const g_pfnVectors[])(void) =
+{
+ (void (*)(void))((uint32_t)&__STACK_TOP),
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ IntDefaultHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ IntDefaultHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ Timer0IntHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ Timer1IntHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ IntDefaultHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ //
+ // Jump to the CCS C initialization routine. This will enable the
+ // floating-point unit as well, so that does not need to be done here.
+ //
+ __asm(" .global _c_int00\n"
+ " b.w _c_int00");
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/timers/startup_ewarm.c b/boards/ek-tm4c123gxl/timers/startup_ewarm.c new file mode 100644 index 0000000..581781d --- /dev/null +++ b/boards/ek-tm4c123gxl/timers/startup_ewarm.c @@ -0,0 +1,334 @@ +//*****************************************************************************
+//
+// startup_ewarm.c - Startup code for use with IAR's Embedded Workbench,
+// version 5.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Enable the IAR extensions for this source file.
+//
+//*****************************************************************************
+#pragma language=extended
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// External declarations for the interrupt handlers used by the application.
+//
+//*****************************************************************************
+extern void Timer0IntHandler(void);
+extern void Timer1IntHandler(void);
+
+//*****************************************************************************
+//
+// The entry point for the application startup code.
+//
+//*****************************************************************************
+extern void __iar_program_start(void);
+
+//*****************************************************************************
+//
+// Reserve space for the system stack.
+//
+//*****************************************************************************
+static uint32_t pui32Stack[64] @ ".noinit";
+
+//*****************************************************************************
+//
+// A union that describes the entries of the vector table. The union is needed
+// since the first entry is the stack pointer and the remainder are function
+// pointers.
+//
+//*****************************************************************************
+typedef union
+{
+ void (*pfnHandler)(void);
+ uint32_t ui32Ptr;
+}
+uVectorEntry;
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000.
+//
+//*****************************************************************************
+__root const uVectorEntry __vector_table[] @ ".intvec" =
+{
+ { .ui32Ptr = (uint32_t)pui32Stack + sizeof(pui32Stack) },
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ IntDefaultHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ IntDefaultHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ Timer0IntHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ Timer1IntHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ IntDefaultHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ //
+ // Enable the floating-point unit. This must be done here to handle the
+ // case where main() uses floating-point and the function prologue saves
+ // floating-point registers (which will fault if floating-point is not
+ // enabled). Any configuration of the floating-point unit using DriverLib
+ // APIs must be done here prior to the floating-point unit being enabled.
+ //
+ // Note that this does not use DriverLib since it might not be included in
+ // this project.
+ //
+ HWREG(NVIC_CPAC) = ((HWREG(NVIC_CPAC) &
+ ~(NVIC_CPAC_CP10_M | NVIC_CPAC_CP11_M)) |
+ NVIC_CPAC_CP10_FULL | NVIC_CPAC_CP11_FULL);
+
+ //
+ // Call the application's entry point.
+ //
+ __iar_program_start();
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/timers/startup_gcc.c b/boards/ek-tm4c123gxl/timers/startup_gcc.c new file mode 100644 index 0000000..a7b92cb --- /dev/null +++ b/boards/ek-tm4c123gxl/timers/startup_gcc.c @@ -0,0 +1,350 @@ +//*****************************************************************************
+//
+// startup_gcc.c - Startup code for use with GNU tools.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// External declarations for the interrupt handlers used by the application.
+//
+//*****************************************************************************
+extern void Timer0IntHandler(void);
+extern void Timer1IntHandler(void);
+
+//*****************************************************************************
+//
+// The entry point for the application.
+//
+//*****************************************************************************
+extern int main(void);
+
+//*****************************************************************************
+//
+// Reserve space for the system stack.
+//
+//*****************************************************************************
+static uint32_t pui32Stack[64];
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000.
+//
+//*****************************************************************************
+__attribute__ ((section(".isr_vector")))
+void (* const g_pfnVectors[])(void) =
+{
+ (void (*)(void))((uint32_t)pui32Stack + sizeof(pui32Stack)),
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ IntDefaultHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ IntDefaultHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ Timer0IntHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ Timer1IntHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ IntDefaultHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// The following are constructs created by the linker, indicating where the
+// the "data" and "bss" segments reside in memory. The initializers for the
+// for the "data" segment resides immediately following the "text" segment.
+//
+//*****************************************************************************
+extern uint32_t _etext;
+extern uint32_t _data;
+extern uint32_t _edata;
+extern uint32_t _bss;
+extern uint32_t _ebss;
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ uint32_t *pui32Src, *pui32Dest;
+
+ //
+ // Copy the data segment initializers from flash to SRAM.
+ //
+ pui32Src = &_etext;
+ for(pui32Dest = &_data; pui32Dest < &_edata; )
+ {
+ *pui32Dest++ = *pui32Src++;
+ }
+
+ //
+ // Zero fill the bss segment.
+ //
+ __asm(" ldr r0, =_bss\n"
+ " ldr r1, =_ebss\n"
+ " mov r2, #0\n"
+ " .thumb_func\n"
+ "zero_loop:\n"
+ " cmp r0, r1\n"
+ " it lt\n"
+ " strlt r2, [r0], #4\n"
+ " blt zero_loop");
+
+ //
+ // Enable the floating-point unit. This must be done here to handle the
+ // case where main() uses floating-point and the function prologue saves
+ // floating-point registers (which will fault if floating-point is not
+ // enabled). Any configuration of the floating-point unit using DriverLib
+ // APIs must be done here prior to the floating-point unit being enabled.
+ //
+ // Note that this does not use DriverLib since it might not be included in
+ // this project.
+ //
+ HWREG(NVIC_CPAC) = ((HWREG(NVIC_CPAC) &
+ ~(NVIC_CPAC_CP10_M | NVIC_CPAC_CP11_M)) |
+ NVIC_CPAC_CP10_FULL | NVIC_CPAC_CP11_FULL);
+
+ //
+ // Call the application's entry point.
+ //
+ main();
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/timers/startup_rvmdk.S b/boards/ek-tm4c123gxl/timers/startup_rvmdk.S new file mode 100644 index 0000000..7b6beb8 --- /dev/null +++ b/boards/ek-tm4c123gxl/timers/startup_rvmdk.S @@ -0,0 +1,359 @@ +; <<< Use Configuration Wizard in Context Menu >>>
+;******************************************************************************
+;
+; startup_rvmdk.S - Startup code for use with Keil's uVision.
+;
+; Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+; Software License Agreement
+;
+; Texas Instruments (TI) is supplying this software for use solely and
+; exclusively on TI's microcontroller products. The software is owned by
+; TI and/or its suppliers, and is protected under applicable copyright
+; laws. You may not combine this software with "viral" open-source
+; software in order to form a larger program.
+;
+; THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+; NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+; NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+; A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+; CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+; DAMAGES, FOR ANY REASON WHATSOEVER.
+;
+; This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+;
+;******************************************************************************
+
+;******************************************************************************
+;
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+;******************************************************************************
+Stack EQU 0x00000100
+
+;******************************************************************************
+;
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+;******************************************************************************
+Heap EQU 0x00000000
+
+;******************************************************************************
+;
+; Allocate space for the stack.
+;
+;******************************************************************************
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+StackMem
+ SPACE Stack
+__initial_sp
+
+;******************************************************************************
+;
+; Allocate space for the heap.
+;
+;******************************************************************************
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+HeapMem
+ SPACE Heap
+__heap_limit
+
+;******************************************************************************
+;
+; Indicate that the code in this file preserves 8-byte alignment of the stack.
+;
+;******************************************************************************
+ PRESERVE8
+
+;******************************************************************************
+;
+; Place code into the reset code section.
+;
+;******************************************************************************
+ AREA RESET, CODE, READONLY
+ THUMB
+
+;******************************************************************************
+;
+; External declarations for the interrupt handlers used by the application.
+;
+;******************************************************************************
+ EXTERN Timer0IntHandler
+ EXTERN Timer1IntHandler
+
+;******************************************************************************
+;
+; The vector table.
+;
+;******************************************************************************
+ EXPORT __Vectors
+__Vectors
+ DCD StackMem + Stack ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NmiSR ; NMI Handler
+ DCD FaultISR ; Hard Fault Handler
+ DCD IntDefaultHandler ; The MPU fault handler
+ DCD IntDefaultHandler ; The bus fault handler
+ DCD IntDefaultHandler ; The usage fault handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; SVCall handler
+ DCD IntDefaultHandler ; Debug monitor handler
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; The PendSV handler
+ DCD IntDefaultHandler ; The SysTick handler
+ DCD IntDefaultHandler ; GPIO Port A
+ DCD IntDefaultHandler ; GPIO Port B
+ DCD IntDefaultHandler ; GPIO Port C
+ DCD IntDefaultHandler ; GPIO Port D
+ DCD IntDefaultHandler ; GPIO Port E
+ DCD IntDefaultHandler ; UART0 Rx and Tx
+ DCD IntDefaultHandler ; UART1 Rx and Tx
+ DCD IntDefaultHandler ; SSI0 Rx and Tx
+ DCD IntDefaultHandler ; I2C0 Master and Slave
+ DCD IntDefaultHandler ; PWM Fault
+ DCD IntDefaultHandler ; PWM Generator 0
+ DCD IntDefaultHandler ; PWM Generator 1
+ DCD IntDefaultHandler ; PWM Generator 2
+ DCD IntDefaultHandler ; Quadrature Encoder 0
+ DCD IntDefaultHandler ; ADC Sequence 0
+ DCD IntDefaultHandler ; ADC Sequence 1
+ DCD IntDefaultHandler ; ADC Sequence 2
+ DCD IntDefaultHandler ; ADC Sequence 3
+ DCD IntDefaultHandler ; Watchdog timer
+ DCD Timer0IntHandler ; Timer 0 subtimer A
+ DCD IntDefaultHandler ; Timer 0 subtimer B
+ DCD Timer1IntHandler ; Timer 1 subtimer A
+ DCD IntDefaultHandler ; Timer 1 subtimer B
+ DCD IntDefaultHandler ; Timer 2 subtimer A
+ DCD IntDefaultHandler ; Timer 2 subtimer B
+ DCD IntDefaultHandler ; Analog Comparator 0
+ DCD IntDefaultHandler ; Analog Comparator 1
+ DCD IntDefaultHandler ; Analog Comparator 2
+ DCD IntDefaultHandler ; System Control (PLL, OSC, BO)
+ DCD IntDefaultHandler ; FLASH Control
+ DCD IntDefaultHandler ; GPIO Port F
+ DCD IntDefaultHandler ; GPIO Port G
+ DCD IntDefaultHandler ; GPIO Port H
+ DCD IntDefaultHandler ; UART2 Rx and Tx
+ DCD IntDefaultHandler ; SSI1 Rx and Tx
+ DCD IntDefaultHandler ; Timer 3 subtimer A
+ DCD IntDefaultHandler ; Timer 3 subtimer B
+ DCD IntDefaultHandler ; I2C1 Master and Slave
+ DCD IntDefaultHandler ; Quadrature Encoder 1
+ DCD IntDefaultHandler ; CAN0
+ DCD IntDefaultHandler ; CAN1
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; Hibernate
+ DCD IntDefaultHandler ; USB0
+ DCD IntDefaultHandler ; PWM Generator 3
+ DCD IntDefaultHandler ; uDMA Software Transfer
+ DCD IntDefaultHandler ; uDMA Error
+ DCD IntDefaultHandler ; ADC1 Sequence 0
+ DCD IntDefaultHandler ; ADC1 Sequence 1
+ DCD IntDefaultHandler ; ADC1 Sequence 2
+ DCD IntDefaultHandler ; ADC1 Sequence 3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; GPIO Port J
+ DCD IntDefaultHandler ; GPIO Port K
+ DCD IntDefaultHandler ; GPIO Port L
+ DCD IntDefaultHandler ; SSI2 Rx and Tx
+ DCD IntDefaultHandler ; SSI3 Rx and Tx
+ DCD IntDefaultHandler ; UART3 Rx and Tx
+ DCD IntDefaultHandler ; UART4 Rx and Tx
+ DCD IntDefaultHandler ; UART5 Rx and Tx
+ DCD IntDefaultHandler ; UART6 Rx and Tx
+ DCD IntDefaultHandler ; UART7 Rx and Tx
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; I2C2 Master and Slave
+ DCD IntDefaultHandler ; I2C3 Master and Slave
+ DCD IntDefaultHandler ; Timer 4 subtimer A
+ DCD IntDefaultHandler ; Timer 4 subtimer B
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; Timer 5 subtimer A
+ DCD IntDefaultHandler ; Timer 5 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 0 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 0 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 1 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 1 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 2 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 2 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 3 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 3 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 4 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 4 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 5 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 5 subtimer B
+ DCD IntDefaultHandler ; FPU
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; I2C4 Master and Slave
+ DCD IntDefaultHandler ; I2C5 Master and Slave
+ DCD IntDefaultHandler ; GPIO Port M
+ DCD IntDefaultHandler ; GPIO Port N
+ DCD IntDefaultHandler ; Quadrature Encoder 2
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; GPIO Port P (Summary or P0)
+ DCD IntDefaultHandler ; GPIO Port P1
+ DCD IntDefaultHandler ; GPIO Port P2
+ DCD IntDefaultHandler ; GPIO Port P3
+ DCD IntDefaultHandler ; GPIO Port P4
+ DCD IntDefaultHandler ; GPIO Port P5
+ DCD IntDefaultHandler ; GPIO Port P6
+ DCD IntDefaultHandler ; GPIO Port P7
+ DCD IntDefaultHandler ; GPIO Port Q (Summary or Q0)
+ DCD IntDefaultHandler ; GPIO Port Q1
+ DCD IntDefaultHandler ; GPIO Port Q2
+ DCD IntDefaultHandler ; GPIO Port Q3
+ DCD IntDefaultHandler ; GPIO Port Q4
+ DCD IntDefaultHandler ; GPIO Port Q5
+ DCD IntDefaultHandler ; GPIO Port Q6
+ DCD IntDefaultHandler ; GPIO Port Q7
+ DCD IntDefaultHandler ; GPIO Port R
+ DCD IntDefaultHandler ; GPIO Port S
+ DCD IntDefaultHandler ; PWM 1 Generator 0
+ DCD IntDefaultHandler ; PWM 1 Generator 1
+ DCD IntDefaultHandler ; PWM 1 Generator 2
+ DCD IntDefaultHandler ; PWM 1 Generator 3
+ DCD IntDefaultHandler ; PWM 1 Fault
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor first starts execution
+; following a reset event.
+;
+;******************************************************************************
+ EXPORT Reset_Handler
+Reset_Handler
+ ;
+ ; Enable the floating-point unit. This must be done here to handle the
+ ; case where main() uses floating-point and the function prologue saves
+ ; floating-point registers (which will fault if floating-point is not
+ ; enabled). Any configuration of the floating-point unit using
+ ; DriverLib APIs must be done here prior to the floating-point unit
+ ; being enabled.
+ ;
+ ; Note that this does not use DriverLib since it might not be included
+ ; in this project.
+ ;
+ MOVW R0, #0xED88
+ MOVT R0, #0xE000
+ LDR R1, [R0]
+ ORR R1, #0x00F00000
+ STR R1, [R0]
+
+ ;
+ ; Call the C library enty point that handles startup. This will copy
+ ; the .data section initializers from flash to SRAM and zero fill the
+ ; .bss section.
+ ;
+ IMPORT __main
+ B __main
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives a NMI. This
+; simply enters an infinite loop, preserving the system state for examination
+; by a debugger.
+;
+;******************************************************************************
+NmiSR
+ B NmiSR
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives a fault
+; interrupt. This simply enters an infinite loop, preserving the system state
+; for examination by a debugger.
+;
+;******************************************************************************
+FaultISR
+ B FaultISR
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives an unexpected
+; interrupt. This simply enters an infinite loop, preserving the system state
+; for examination by a debugger.
+;
+;******************************************************************************
+IntDefaultHandler
+ B IntDefaultHandler
+
+;******************************************************************************
+;
+; Make sure the end of this section is aligned.
+;
+;******************************************************************************
+ ALIGN
+
+;******************************************************************************
+;
+; Some code in the normal code section for initializing the heap and stack.
+;
+;******************************************************************************
+ AREA |.text|, CODE, READONLY
+
+;******************************************************************************
+;
+; The function expected of the C library startup code for defining the stack
+; and heap memory locations. For the C library version of the startup code,
+; provide this function so that the C library initialization code can find out
+; the location of the stack and heap.
+;
+;******************************************************************************
+ IF :DEF: __MICROLIB
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+ ELSE
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+__user_initial_stackheap
+ LDR R0, =HeapMem
+ LDR R1, =(StackMem + Stack)
+ LDR R2, =(HeapMem + Heap)
+ LDR R3, =StackMem
+ BX LR
+ ENDIF
+
+;******************************************************************************
+;
+; Make sure the end of this section is aligned.
+;
+;******************************************************************************
+ ALIGN
+
+;******************************************************************************
+;
+; Tell the assembler that we're done.
+;
+;******************************************************************************
+ END
diff --git a/boards/ek-tm4c123gxl/timers/timers.c b/boards/ek-tm4c123gxl/timers/timers.c new file mode 100644 index 0000000..4c8e4ce --- /dev/null +++ b/boards/ek-tm4c123gxl/timers/timers.c @@ -0,0 +1,262 @@ +//*****************************************************************************
+//
+// timers.c - Timers example.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "inc/hw_ints.h"
+#include "inc/hw_memmap.h"
+#include "inc/hw_types.h"
+#include "driverlib/debug.h"
+#include "driverlib/fpu.h"
+#include "driverlib/gpio.h"
+#include "driverlib/interrupt.h"
+#include "driverlib/pin_map.h"
+#include "driverlib/rom.h"
+#include "driverlib/sysctl.h"
+#include "driverlib/timer.h"
+#include "driverlib/uart.h"
+#include "utils/uartstdio.h"
+
+//*****************************************************************************
+//
+//! \addtogroup example_list
+//! <h1>Timer (timers)</h1>
+//!
+//! This example application demonstrates the use of the timers to generate
+//! periodic interrupts. One timer is set up to interrupt once per second and
+//! the other to interrupt twice per second; each interrupt handler will toggle
+//! its own indicator on the display.
+//!
+//! UART0, connected to the Virtual Serial Port and running at 115,200, 8-N-1,
+//! is used to display messages from this application.
+//
+//*****************************************************************************
+
+//*****************************************************************************
+//
+// Flags that contain the current value of the interrupt indicator as displayed
+// on the UART.
+//
+//*****************************************************************************
+uint32_t g_ui32Flags;
+
+//*****************************************************************************
+//
+// The error routine that is called if the driver library encounters an error.
+//
+//*****************************************************************************
+#ifdef DEBUG
+void
+__error__(char *pcFilename, uint32_t ui32Line)
+{
+}
+#endif
+
+//*****************************************************************************
+//
+// The interrupt handler for the first timer interrupt.
+//
+//*****************************************************************************
+void
+Timer0IntHandler(void)
+{
+ char cOne, cTwo;
+
+ //
+ // Clear the timer interrupt.
+ //
+ ROM_TimerIntClear(TIMER0_BASE, TIMER_TIMA_TIMEOUT);
+
+ //
+ // Toggle the flag for the first timer.
+ //
+ HWREGBITW(&g_ui32Flags, 0) ^= 1;
+
+ //
+ // Use the flags to Toggle the LED for this timer
+ //
+ GPIOPinWrite(GPIO_PORTF_BASE, GPIO_PIN_1, g_ui32Flags << 1);
+
+ //
+ // Update the interrupt status on the display.
+ //
+ ROM_IntMasterDisable();
+ cOne = HWREGBITW(&g_ui32Flags, 0) ? '1' : '0';
+ cTwo = HWREGBITW(&g_ui32Flags, 1) ? '1' : '0';
+ UARTprintf("\rT1: %c T2: %c", cOne, cTwo);
+ ROM_IntMasterEnable();
+}
+
+//*****************************************************************************
+//
+// The interrupt handler for the second timer interrupt.
+//
+//*****************************************************************************
+void
+Timer1IntHandler(void)
+{
+ char cOne, cTwo;
+
+ //
+ // Clear the timer interrupt.
+ //
+ ROM_TimerIntClear(TIMER1_BASE, TIMER_TIMA_TIMEOUT);
+
+ //
+ // Toggle the flag for the second timer.
+ //
+ HWREGBITW(&g_ui32Flags, 1) ^= 1;
+
+ //
+ // Use the flags to Toggle the LED for this timer
+ //
+ GPIOPinWrite(GPIO_PORTF_BASE, GPIO_PIN_2, g_ui32Flags << 1);
+
+ //
+ // Update the interrupt status on the display.
+ //
+ ROM_IntMasterDisable();
+ cOne = HWREGBITW(&g_ui32Flags, 0) ? '1' : '0';
+ cTwo = HWREGBITW(&g_ui32Flags, 1) ? '1' : '0';
+ UARTprintf("\rT1: %c T2: %c", cOne, cTwo);
+ ROM_IntMasterEnable();
+}
+
+//*****************************************************************************
+//
+// Configure the UART and its pins. This must be called before UARTprintf().
+//
+//*****************************************************************************
+void
+ConfigureUART(void)
+{
+ //
+ // Enable the GPIO Peripheral used by the UART.
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOA);
+
+ //
+ // Enable UART0
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_UART0);
+
+ //
+ // Configure GPIO Pins for UART mode.
+ //
+ ROM_GPIOPinConfigure(GPIO_PA0_U0RX);
+ ROM_GPIOPinConfigure(GPIO_PA1_U0TX);
+ ROM_GPIOPinTypeUART(GPIO_PORTA_BASE, GPIO_PIN_0 | GPIO_PIN_1);
+
+ //
+ // Use the internal 16MHz oscillator as the UART clock source.
+ //
+ UARTClockSourceSet(UART0_BASE, UART_CLOCK_PIOSC);
+
+ //
+ // Initialize the UART for console I/O.
+ //
+ UARTStdioConfig(0, 115200, 16000000);
+}
+
+//*****************************************************************************
+//
+// This example application demonstrates the use of the timers to generate
+// periodic interrupts.
+//
+//*****************************************************************************
+int
+main(void)
+{
+ //
+ // Enable lazy stacking for interrupt handlers. This allows floating-point
+ // instructions to be used within interrupt handlers, but at the expense of
+ // extra stack usage.
+ //
+ ROM_FPULazyStackingEnable();
+
+ //
+ // Set the clocking to run directly from the crystal.
+ //
+ ROM_SysCtlClockSet(SYSCTL_SYSDIV_1 | SYSCTL_USE_OSC | SYSCTL_OSC_MAIN |
+ SYSCTL_XTAL_16MHZ);
+
+ //
+ // Initialize the UART and write status.
+ //
+ ConfigureUART();
+
+ UARTprintf("\033[2JTimers example\n");
+ UARTprintf("T1: 0 T2: 0");
+
+ //
+ // Enable the GPIO port that is used for the on-board LED.
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOF);
+
+ //
+ // Enable the GPIO pins for the LED (PF1 & PF2).
+ //
+ ROM_GPIOPinTypeGPIOOutput(GPIO_PORTF_BASE, GPIO_PIN_2 | GPIO_PIN_1);
+
+
+ //
+ // Enable the peripherals used by this example.
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_TIMER0);
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_TIMER1);
+
+ //
+ // Enable processor interrupts.
+ //
+ ROM_IntMasterEnable();
+
+ //
+ // Configure the two 32-bit periodic timers.
+ //
+ ROM_TimerConfigure(TIMER0_BASE, TIMER_CFG_PERIODIC);
+ ROM_TimerConfigure(TIMER1_BASE, TIMER_CFG_PERIODIC);
+ ROM_TimerLoadSet(TIMER0_BASE, TIMER_A, ROM_SysCtlClockGet());
+ ROM_TimerLoadSet(TIMER1_BASE, TIMER_A, ROM_SysCtlClockGet() / 2);
+
+ //
+ // Setup the interrupts for the timer timeouts.
+ //
+ ROM_IntEnable(INT_TIMER0A);
+ ROM_IntEnable(INT_TIMER1A);
+ ROM_TimerIntEnable(TIMER0_BASE, TIMER_TIMA_TIMEOUT);
+ ROM_TimerIntEnable(TIMER1_BASE, TIMER_TIMA_TIMEOUT);
+
+ //
+ // Enable the timers.
+ //
+ ROM_TimerEnable(TIMER0_BASE, TIMER_A);
+ ROM_TimerEnable(TIMER1_BASE, TIMER_A);
+
+ //
+ // Loop forever while the timers run.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/timers/timers.ewd b/boards/ek-tm4c123gxl/timers/timers.ewd new file mode 100644 index 0000000..7a32408 --- /dev/null +++ b/boards/ek-tm4c123gxl/timers/timers.ewd @@ -0,0 +1,614 @@ +<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+ <fileVersion>1</fileVersion>
+ <configuration>
+ <name>Debug</name>
+ <toolchain>
+ <name>ARM</name>
+ </toolchain>
+ <debug>1</debug>
+ <settings>
+ <name>C-SPY</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>15</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CInput</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CEndian</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCVariant</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>MemOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MemFile</name>
+ <state>$TOOLKIT_DIR$\CONFIG\debugger\TexasInstruments\tm4c123gh6pm</state>
+ </option>
+ <option>
+ <name>RunToEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>RunToName</name>
+ <state>main</state>
+ </option>
+ <option>
+ <name>CExtraOptionsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCDDFArgumentProducer</name>
+ <state></state>
+ </option>
+ <option>
+ <name>OCDownloadSuppressDownload</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDownloadVerifyAll</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OCDynDriverList</name>
+ <state>LMIFTDI_ID</state>
+ </option>
+ <option>
+ <name>OCLastSavedByProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OCDownloadAttachToProgram</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FlashLoaders</name>
+ <state>,,,,(default),</state>
+ </option>
+ <option>
+ <name>UseFlashLoader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CLowLevel</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCBE8Slave</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ARMSIM_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCSimDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCSimEnablePSP</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCSimPspOverrideConfig</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCSimPspConfigFile</name>
+ <state></state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ANGEL_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CCAngelHeartbeat</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CAngelCommunication</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CAngelCommBaud</name>
+ <version>0</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>CAngelCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ANGELTCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoAngelLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AngelLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>GDBSERVER_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>TCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>LogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCJTagBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>IARROM_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CRomLogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomLogFileEditB</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CRomCommunication</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomCommBaud</name>
+ <version>0</version>
+ <state>7</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>JLINK_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>9</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>JLinkSpeed</name>
+ <state>32</state>
+ </option>
+ <option>
+ <name>CCJLinkDoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCJLinkHWResetDelay</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>JLinkInitialSpeed</name>
+ <state>32</state>
+ </option>
+ <option>
+ <name>CCDoJlinkMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCScanChainNonARMDevices</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkIRLength</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkCommRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkTCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>CCJLinkSpeedRadioV2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCUSBDevice</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchUndef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchSWI</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchData</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchPrefetch</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchIRQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchFIQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ <option>
+ <name>CCJLinkInterfaceRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCJLinkAttachSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCJLinkResetList</name>
+ <version>0</version>
+ <state>5</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>LMIFTDI_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>LmiftdiSpeed</name>
+ <state>500</state>
+ </option>
+ <option>
+ <name>CCLmiftdiDoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCLmiftdiLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>MACRAIGOR_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>2</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>jtag</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>EmuSpeed</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>TCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>LogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>DoEmuMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>EmuMultiTarget</name>
+ <state>0@ARM7TDMI</state>
+ </option>
+ <option>
+ <name>EmuHWReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CEmuCommBaud</name>
+ <version>0</version>
+ <state>4</state>
+ </option>
+ <option>
+ <name>CEmuCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>jtago</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>UnusedAddr</name>
+ <state>0x00800000</state>
+ </option>
+ <option>
+ <name>CCMacraigorHWResetDelay</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCJTagBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>RDI_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CRDIDriverDll</name>
+ <state>Browse to your RDI driver</state>
+ </option>
+ <option>
+ <name>CRDILogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRDILogFileEdit</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCRDIHWReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchUndef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchSWI</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchData</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchPrefetch</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchIRQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchFIQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDIUseETM</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>THIRDPARTY_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CThirdPartyDriverDll</name>
+ <state>Browse to your third-party driver</state>
+ </option>
+ <option>
+ <name>CThirdPartyLogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CThirdPartyLogFileEditB</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <debuggerPlugins>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\OSE\OseEpsilonPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Profiling\Profiling.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ </debuggerPlugins>
+ </configuration>
+</project>
diff --git a/boards/ek-tm4c123gxl/timers/timers.ewp b/boards/ek-tm4c123gxl/timers/timers.ewp new file mode 100644 index 0000000..f3cc550 --- /dev/null +++ b/boards/ek-tm4c123gxl/timers/timers.ewp @@ -0,0 +1,787 @@ +<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+ <fileVersion>1</fileVersion>
+ <configuration>
+ <name>Debug</name>
+ <toolchain>
+ <name>ARM</name>
+ </toolchain>
+ <debug>1</debug>
+ <settings>
+ <name>General</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <version>14</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>ExePath</name>
+ <state>ewarm\Exe</state>
+ </option>
+ <option>
+ <name>ObjPath</name>
+ <state>ewarm\Obj</state>
+ </option>
+ <option>
+ <name>ListPath</name>
+ <state>ewarm\List</state>
+ </option>
+ <option>
+ <name>Variant</name>
+ <version>19</version>
+ <state>39</state>
+ </option>
+ <option>
+ <name>GEndianMode</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>Input variant</name>
+ <version>1</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>Input description</name>
+ <state>No specifier n, no float nor long long, no scan set, no assignment suppressing.</state>
+ </option>
+ <option>
+ <name>Output variant</name>
+ <version>0</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>Output description</name>
+ <state>No specifier a, A, no specifier n, no float nor long long, no flags.</state>
+ </option>
+ <option>
+ <name>GOutputBinary</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FPU</name>
+ <version>2</version>
+ <state>5</state>
+ </option>
+ <option>
+ <name>OGCoreOrChip</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelect</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelectSlave</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>RTDescription</name>
+ <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+ </option>
+ <option>
+ <name>RTConfigPath</name>
+ <state>$TOOLKIT_DIR$\INC\DLib_Config_Normal.h</state>
+ </option>
+ <option>
+ <name>OGProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OGLastSavedByProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>GeneralMisraRules</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>GeneralEnableMisra</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GeneralMisraVerbose</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGChipSelectEditMenu</name>
+ <state>TM4C123GH6PM TexasInstruments TM4C123GH6PM</state>
+ </option>
+ <option>
+ <name>GenLowLevelInterface</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GEndianModeBE</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OGBufferedTerminalOutput</name>
+ <state>0</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ICCARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>19</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CCDefines</name>
+ <state>ewarm</state>
+ <state>PART_TM4C123GH6PM</state>
+ <state>TARGET_IS_TM4C123_RB1</state>
+ </option>
+ <option>
+ <name>CCPreprocFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocComments</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMnemonics</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMessages</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssSource</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagSuppress</name>
+ <state>Pa050</state>
+ </option>
+ <option>
+ <name>CCDiagRemark</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCDiagWarning</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCDiagError</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCAllowList</name>
+ <version>1</version>
+ <state>1111111</state>
+ </option>
+ <option>
+ <name>CCDebugInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IEndianMode</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IExtraOptionsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCLangConformance</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCSignedPlainChar</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCRequirePrototypes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagWarnAreErr</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCCompilerRuntimeInfo</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OutputFile</name>
+ <state>$FILE_BNAME$.o</state>
+ </option>
+ <option>
+ <name>CCLangSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCLibConfigHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>PreInclude</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CompilerMisraRules</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>CompilerMisraOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCIncludePath2</name>
+ <state>$PROJ_DIR$\..\..\..\..</state>
+ </option>
+ <option>
+ <name>CCStdIncCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCStdIncludePath</name>
+ <state>$TOOLKIT_DIR$\INC\</state>
+ </option>
+ <option>
+ <name>CCCodeSection</name>
+ <state>.text</state>
+ </option>
+ <option>
+ <name>IInterwork2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IProcessorMode2</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptLevel</name>
+ <state>3</state>
+ </option>
+ <option>
+ <name>CCOptStrategy</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptLevelSlave</name>
+ <state>3</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>AARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>7</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>AObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AEndian</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>ACaseSensitivity</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacroChars</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnEnable</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnWhat</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnOne</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AWarnRange1</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AWarnRange2</name>
+ <state></state>
+ </option>
+ <option>
+ <name>ADebug</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AltRegisterNames</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ADefines</name>
+ <state>ewarm</state>
+ </option>
+ <option>
+ <name>AList</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AListHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AListing</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>Includes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacDefs</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacExps</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacExec</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OnlyAssed</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MultiLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLengthCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLength</name>
+ <state>80</state>
+ </option>
+ <option>
+ <name>TabSpacing</name>
+ <state>8</state>
+ </option>
+ <option>
+ <name>AXRef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDefines</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefInternal</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDual</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AOutputFile</name>
+ <state>$FILE_BNAME$.o</state>
+ </option>
+ <option>
+ <name>AMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ALimitErrorsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ALimitErrorsEdit</name>
+ <state>100</state>
+ </option>
+ <option>
+ <name>AIgnoreStdInclude</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AStdIncludes</name>
+ <state>$TOOLKIT_DIR$\INC\</state>
+ </option>
+ <option>
+ <name>AUserIncludes</name>
+ <state>$PROJ_DIR$\..\..\..\..</state>
+ </option>
+ <option>
+ <name>AExtraOptionsCheckV2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AExtraOptionsV2</name>
+ <state></state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>OBJCOPY</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OOCOutputFormat</name>
+ <version>1</version>
+ <state>2</state>
+ </option>
+ <option>
+ <name>OCOutputOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OOCOutputFile</name>
+ <state>timers.bin</state>
+ </option>
+ <option>
+ <name>OOCCommandLineProducer</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OOCObjCopyEnable</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>CUSTOM</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <extensions></extensions>
+ <cmdline></cmdline>
+ </data>
+ </settings>
+ <settings>
+ <name>BICOMP</name>
+ <archiveVersion>0</archiveVersion>
+ <data/>
+ </settings>
+ <settings>
+ <name>BUILDACTION</name>
+ <archiveVersion>1</archiveVersion>
+ <data>
+ <prebuild></prebuild>
+ <postbuild></postbuild>
+ </data>
+ </settings>
+ <settings>
+ <name>ILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>5</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>IlinkLibIOConfig</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>XLinkMisraHandler</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkInputFileSlave</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkOutputFile</name>
+ <state>timers.out</state>
+ </option>
+ <option>
+ <name>IlinkDebugInfoEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkKeepSymbols</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinaryFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinarySymbol</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinarySegment</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinaryAlign</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkDefines</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkConfigDefines</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkMapFile</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkLogFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogInitialization</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogModule</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogSection</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogVeneer</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkIcfOverride</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkIcfFile</name>
+ <state>$PROJ_DIR$\timers.icf</state>
+ </option>
+ <option>
+ <name>IlinkIcfFileSlave</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkSuppressDiags</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsRem</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsWarn</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsErr</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkWarningsAreErrors</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkUseExtraOptions</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkLowLevelInterfaceSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAutoLibEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAdditionalLibs</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkOverrideProgramEntryLabel</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabelSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabel</name>
+ <state>__iar_program_start</state>
+ </option>
+ <option>
+ <name>IlinkNXPLPCChecksum</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>DoFill</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FillerByte</name>
+ <state>0xFF</state>
+ </option>
+ <option>
+ <name>FillerStart</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>FillerEnd</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>CrcSize</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcAlign</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcAlgo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcPoly</name>
+ <state>0x11021</state>
+ </option>
+ <option>
+ <name>CrcCompl</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcBitOrder</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcInitialValue</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>DoCrc</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkBE8Slave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkBufferedTerminalOutput</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>IARCHIVE</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>IarchiveInputs</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IarchiveOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IarchiveOutput</name>
+ <state>###Unitialized###</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>BILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data/>
+ </settings>
+ </configuration>
+ <group>
+ <name>Libraries</name>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\driverlib\ewarm\Exe\driverlib.a</name>
+ </file>
+ </group>
+ <group>
+ <name>Source</name>
+ <file>
+ <name>$PROJ_DIR$\startup_ewarm.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\timers.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\utils\uartstdio.c</name>
+ </file>
+ </group>
+</project>
diff --git a/boards/ek-tm4c123gxl/timers/timers.icf b/boards/ek-tm4c123gxl/timers/timers.icf new file mode 100644 index 0000000..eaf2160 --- /dev/null +++ b/boards/ek-tm4c123gxl/timers/timers.icf @@ -0,0 +1,78 @@ +//*****************************************************************************
+//
+// timers.icf - Linker configuration file for timers.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+//
+// Define a memory region that covers the entire 4 GB addressible space of the
+// processor.
+//
+define memory mem with size = 4G;
+
+//
+// Define a region for the on-chip flash.
+//
+define region FLASH = mem:[from 0x00000000 to 0x0003ffff];
+
+//
+// Define a region for the on-chip SRAM.
+//
+define region SRAM = mem:[from 0x20000000 to 0x20007fff];
+
+//
+// Define a block for the heap. The size should be set to something other
+// than zero if things in the C library that require the heap are used.
+//
+define block HEAP with alignment = 8, size = 0x00000000 { };
+
+//
+// Indicate that the read/write values should be initialized by copying from
+// flash.
+//
+initialize by copy { readwrite };
+
+//
+// Indicate that the noinit values should be left alone. This includes the
+// stack, which if initialized will destroy the return address from the
+// initialization code, causing the processor to branch to zero and fault.
+//
+do not initialize { section .noinit };
+
+//
+// Place the interrupt vectors at the start of flash.
+//
+place at start of FLASH { readonly section .intvec };
+
+//
+// Place the remainder of the read-only items into flash.
+//
+place in FLASH { readonly };
+
+//
+// Place the RAM vector table at the start of SRAM.
+//
+place at start of SRAM { section VTABLE };
+
+//
+// Place all read/write items into SRAM.
+//
+place in SRAM { readwrite, block HEAP };
diff --git a/boards/ek-tm4c123gxl/timers/timers.ld b/boards/ek-tm4c123gxl/timers/timers.ld new file mode 100644 index 0000000..9e716ed --- /dev/null +++ b/boards/ek-tm4c123gxl/timers/timers.ld @@ -0,0 +1,57 @@ +/******************************************************************************
+ *
+ * timers.ld - Linker configuration file for timers.
+ *
+ * Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+ * Software License Agreement
+ *
+ * Texas Instruments (TI) is supplying this software for use solely and
+ * exclusively on TI's microcontroller products. The software is owned by
+ * TI and/or its suppliers, and is protected under applicable copyright
+ * laws. You may not combine this software with "viral" open-source
+ * software in order to form a larger program.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+ * NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+ * NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+ * CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+ * DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ * This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+ *
+ *****************************************************************************/
+
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x00040000
+ SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000
+}
+
+SECTIONS
+{
+ .text :
+ {
+ _text = .;
+ KEEP(*(.isr_vector))
+ *(.text*)
+ *(.rodata*)
+ _etext = .;
+ } > FLASH
+
+ .data : AT(ADDR(.text) + SIZEOF(.text))
+ {
+ _data = .;
+ *(vtable)
+ *(.data*)
+ _edata = .;
+ } > SRAM
+
+ .bss :
+ {
+ _bss = .;
+ *(.bss*)
+ *(COMMON)
+ _ebss = .;
+ } > SRAM
+}
diff --git a/boards/ek-tm4c123gxl/timers/timers.sct b/boards/ek-tm4c123gxl/timers/timers.sct new file mode 100644 index 0000000..67eee9e --- /dev/null +++ b/boards/ek-tm4c123gxl/timers/timers.sct @@ -0,0 +1,47 @@ +;******************************************************************************
+;
+; timers.sct - Linker configuration file for timers.
+;
+; Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+; Software License Agreement
+;
+; Texas Instruments (TI) is supplying this software for use solely and
+; exclusively on TI's microcontroller products. The software is owned by
+; TI and/or its suppliers, and is protected under applicable copyright
+; laws. You may not combine this software with "viral" open-source
+; software in order to form a larger program.
+;
+; THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+; NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+; NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+; A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+; CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+; DAMAGES, FOR ANY REASON WHATSOEVER.
+;
+; This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+;
+;******************************************************************************
+
+LR_IROM 0x00000000 0x00040000
+{
+ ;
+ ; Specify the Execution Address of the code and the size.
+ ;
+ ER_IROM 0x00000000 0x00040000
+ {
+ *.o (RESET, +First)
+ * (InRoot$$Sections, +RO)
+ }
+
+ ;
+ ; Specify the Execution Address of the data area.
+ ;
+ RW_IRAM 0x20000000 0x00008000
+ {
+ ;
+ ; Uncomment the following line in order to use IntRegister().
+ ;
+ ;* (vtable, +First)
+ * (+RW, +ZI)
+ }
+}
diff --git a/boards/ek-tm4c123gxl/timers/timers.uvopt b/boards/ek-tm4c123gxl/timers/timers.uvopt new file mode 100644 index 0000000..f75a29e --- /dev/null +++ b/boards/ek-tm4c123gxl/timers/timers.uvopt @@ -0,0 +1,303 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+ <SchemaVersion>1.0</SchemaVersion>
+
+ <Header>### uVision Project, (C) Keil Software</Header>
+
+ <Extensions>
+ <cExt>*.c</cExt>
+ <aExt>*.s*; *.src; *.a*</aExt>
+ <oExt>*.obj</oExt>
+ <lExt>*.lib</lExt>
+ <tExt>*.txt; *.h; *.inc</tExt>
+ <pExt>*.plm</pExt>
+ <CppX>*.cpp</CppX>
+ </Extensions>
+
+ <DaveTm>
+ <dwLowDateTime>0</dwLowDateTime>
+ <dwHighDateTime>0</dwHighDateTime>
+ </DaveTm>
+
+ <Target>
+ <TargetName>timers</TargetName>
+ <ToolsetNumber>0x4</ToolsetNumber>
+ <ToolsetName>ARM-ADS</ToolsetName>
+ <TargetOption>
+ <CLKADS>8000000</CLKADS>
+ <OPTTT>
+ <gFlags>1</gFlags>
+ <BeepAtEnd>1</BeepAtEnd>
+ <RunSim>1</RunSim>
+ <RunTarget>0</RunTarget>
+ </OPTTT>
+ <OPTHX>
+ <HexSelection>1</HexSelection>
+ <FlashByte>65535</FlashByte>
+ <HexRangeLowAddress>0</HexRangeLowAddress>
+ <HexRangeHighAddress>0</HexRangeHighAddress>
+ <HexOffset>0</HexOffset>
+ </OPTHX>
+ <OPTLEX>
+ <PageWidth>79</PageWidth>
+ <PageLength>66</PageLength>
+ <TabStop>8</TabStop>
+ <ListingPath>.\rvmdk\</ListingPath>
+ </OPTLEX>
+ <ListingPage>
+ <CreateCListing>1</CreateCListing>
+ <CreateAListing>1</CreateAListing>
+ <CreateLListing>1</CreateLListing>
+ <CreateIListing>0</CreateIListing>
+ <AsmCond>1</AsmCond>
+ <AsmSymb>1</AsmSymb>
+ <AsmXref>0</AsmXref>
+ <CCond>1</CCond>
+ <CCode>0</CCode>
+ <CListInc>0</CListInc>
+ <CSymb>0</CSymb>
+ <LinkerCodeListing>0</LinkerCodeListing>
+ </ListingPage>
+ <OPTXL>
+ <LMap>1</LMap>
+ <LComments>1</LComments>
+ <LGenerateSymbols>1</LGenerateSymbols>
+ <LLibSym>1</LLibSym>
+ <LLines>1</LLines>
+ <LLocSym>1</LLocSym>
+ <LPubSym>1</LPubSym>
+ <LXref>0</LXref>
+ <LExpSel>0</LExpSel>
+ </OPTXL>
+ <OPTFL>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <IsCurrentTarget>1</IsCurrentTarget>
+ </OPTFL>
+ <CpuCode>255</CpuCode>
+ <Books>
+ <Book>
+ <Number>0</Number>
+ <Title>Data Sheet</Title>
+ <Path>DATASHTS\Luminary\TM4C123GH6PM.PDF</Path>
+ </Book>
+ </Books>
+ <DllOpt>
+ <SimDllName>SARMCM3.DLL</SimDllName>
+ <SimDllArguments>-MPU</SimDllArguments>
+ <SimDlgDllName>DCM.DLL</SimDlgDllName>
+ <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+ <TargetDllName>SARMCM3.DLL</TargetDllName>
+ <TargetDllArguments>-MPU</TargetDllArguments>
+ <TargetDlgDllName>TCM.DLL</TargetDlgDllName>
+ <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+ </DllOpt>
+ <DebugOpt>
+ <uSim>0</uSim>
+ <uTrg>1</uTrg>
+ <sLdApp>1</sLdApp>
+ <sGomain>1</sGomain>
+ <sRbreak>1</sRbreak>
+ <sRwatch>1</sRwatch>
+ <sRmem>1</sRmem>
+ <sRfunc>1</sRfunc>
+ <sRbox>1</sRbox>
+ <tLdApp>1</tLdApp>
+ <tGomain>0</tGomain>
+ <tRbreak>1</tRbreak>
+ <tRwatch>1</tRwatch>
+ <tRmem>1</tRmem>
+ <tRfunc>0</tRfunc>
+ <tRbox>1</tRbox>
+ <sRunDeb>0</sRunDeb>
+ <sLrtime>0</sLrtime>
+ <nTsel>4</nTsel>
+ <sDll></sDll>
+ <sDllPa></sDllPa>
+ <sDlgDll></sDlgDll>
+ <sDlgPa></sDlgPa>
+ <sIfile></sIfile>
+ <tDll></tDll>
+ <tDllPa></tDllPa>
+ <tDlgDll></tDlgDll>
+ <tDlgPa></tDlgPa>
+ <tIfile></tIfile>
+ <pMon>BIN\lmidk-agdi.dll</pMon>
+ </DebugOpt>
+ <TargetDriverDllRegistry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>lmidk-agdi</Key>
+ <Name>-O4614 -S3 -FO29</Name>
+ </SetRegEntry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>DLGTARM</Key>
+ <Name></Name>
+ </SetRegEntry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>ARMDBGFLAGS</Key>
+ <Name></Name>
+ </SetRegEntry>
+ </TargetDriverDllRegistry>
+ <DebugFlag>
+ <trace>0</trace>
+ <periodic>1</periodic>
+ <aLwin>0</aLwin>
+ <aCover>0</aCover>
+ <aSer1>0</aSer1>
+ <aSer2>0</aSer2>
+ <aPa>0</aPa>
+ <viewmode>1</viewmode>
+ <vrSel>0</vrSel>
+ <aSym>0</aSym>
+ <aTbox>0</aTbox>
+ <AscS1>0</AscS1>
+ <AscS2>0</AscS2>
+ <AscS3>0</AscS3>
+ <aSer3>0</aSer3>
+ <eProf>0</eProf>
+ <aLa>0</aLa>
+ <aPa1>0</aPa1>
+ <AscS4>0</AscS4>
+ <aSer4>0</aSer4>
+ <StkLoc>0</StkLoc>
+ <TrcWin>0</TrcWin>
+ <newCpu>0</newCpu>
+ <uProt>0</uProt>
+ </DebugFlag>
+ <LintExecutable></LintExecutable>
+ <LintConfigFile></LintConfigFile>
+ </TargetOption>
+ </Target>
+
+ <Group>
+ <GroupName>Source</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>1</FileNumber>
+ <FileType>2</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\startup_rvmdk.S</PathWithFileName>
+ <FilenameWithoutPath>startup_rvmdk.S</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>2</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\timers.c</PathWithFileName>
+ <FilenameWithoutPath>timers.c</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>3</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\utils\uartstdio.c</PathWithFileName>
+ <FilenameWithoutPath>uartstdio.c</FilenameWithoutPath>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>Libraries</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>4</FileNumber>
+ <FileType>4</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\driverlib\rvmdk\driverlib.lib</PathWithFileName>
+ <FilenameWithoutPath>driverlib.lib</FilenameWithoutPath>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>Documentation</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>3</GroupNumber>
+ <FileNumber>5</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <Focus>1</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>1</TopLine>
+ <CurrentLine>1</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\readme.txt</PathWithFileName>
+ <FilenameWithoutPath>readme.txt</FilenameWithoutPath>
+ <WindowPosition>
+ <length>44</length>
+ <flags>0</flags>
+ <showCmd>1</showCmd>
+ <MinPosition>
+ <xPos>-1</xPos>
+ <yPos>-1</yPos>
+ </MinPosition>
+ <MaxPosition>
+ <xPos>-1</xPos>
+ <yPos>-1</yPos>
+ </MaxPosition>
+ <NormalPosition>
+ <Top>0</Top>
+ <Left>0</Left>
+ <Right>729</Right>
+ <Bottom>300</Bottom>
+ </NormalPosition>
+ </WindowPosition>
+ </File>
+ </Group>
+
+ <MDIGroups>
+ <Orientation>1</Orientation>
+ <ActiveMDIGroup>0</ActiveMDIGroup>
+ <MDIGroup>
+ <Size>100</Size>
+ <ActiveTab>0</ActiveTab>
+ <Documents>
+ <Doc>
+ <Name>.\readme.txt</Name>
+ <ColumnNumber>0</ColumnNumber>
+ <TopLine>1</TopLine>
+ <CurrentLine>1</CurrentLine>
+ </Doc>
+ </Documents>
+ </MDIGroup>
+ </MDIGroups>
+
+</ProjectOpt>
diff --git a/boards/ek-tm4c123gxl/timers/timers.uvproj b/boards/ek-tm4c123gxl/timers/timers.uvproj new file mode 100644 index 0000000..082aebf --- /dev/null +++ b/boards/ek-tm4c123gxl/timers/timers.uvproj @@ -0,0 +1,429 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+ <SchemaVersion>1.1</SchemaVersion>
+
+ <Header>### uVision Project, (C) Keil Software</Header>
+
+ <Targets>
+ <Target>
+ <TargetName>timers</TargetName>
+ <ToolsetNumber>0x4</ToolsetNumber>
+ <ToolsetName>ARM-ADS</ToolsetName>
+ <TargetOption>
+ <TargetCommonOption>
+ <Device>TM4C123GH6PM</Device>
+ <Vendor>Texas Instruments</Vendor>
+ <Cpu>IRAM(0x20000000-0x20007FFF) IROM(0-0x3FFFF) CLOCK(8000000) CPUTYPE("Cortex-M4") FPU2</Cpu>
+ <FlashUtilSpec></FlashUtilSpec>
+ <StartupFile>"STARTUP\Luminary\Startup.s" ("Luminary Startup Code")</StartupFile>
+ <FlashDriverDll>UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0LM4F_256 -FS00 -FL040000)</FlashDriverDll>
+ <DeviceId>5919</DeviceId>
+ <RegisterFile>LM4Fxxxx.H</RegisterFile>
+ <MemoryEnv></MemoryEnv>
+ <Cmp></Cmp>
+ <Asm></Asm>
+ <Linker></Linker>
+ <OHString></OHString>
+ <InfinionOptionDll></InfinionOptionDll>
+ <SLE66CMisc></SLE66CMisc>
+ <SLE66AMisc></SLE66AMisc>
+ <SLE66LinkerMisc></SLE66LinkerMisc>
+ <UseEnv>0</UseEnv>
+ <BinPath></BinPath>
+ <IncludePath></IncludePath>
+ <LibPath></LibPath>
+ <RegisterFilePath>Luminary\</RegisterFilePath>
+ <DBRegisterFilePath>Luminary\</DBRegisterFilePath>
+ <TargetStatus>
+ <Error>0</Error>
+ <ExitCodeStop>0</ExitCodeStop>
+ <ButtonStop>0</ButtonStop>
+ <NotGenerated>0</NotGenerated>
+ <InvalidFlash>1</InvalidFlash>
+ </TargetStatus>
+ <OutputDirectory>.\rvmdk\</OutputDirectory>
+ <OutputName>timers</OutputName>
+ <CreateExecutable>1</CreateExecutable>
+ <CreateLib>0</CreateLib>
+ <CreateHexFile>0</CreateHexFile>
+ <DebugInformation>1</DebugInformation>
+ <BrowseInformation>1</BrowseInformation>
+ <ListingPath>.\rvmdk\</ListingPath>
+ <HexFormatSelection>1</HexFormatSelection>
+ <Merge32K>0</Merge32K>
+ <CreateBatchFile>0</CreateBatchFile>
+ <BeforeCompile>
+ <RunUserProg1>0</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name></UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </BeforeCompile>
+ <BeforeMake>
+ <RunUserProg1>0</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name></UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </BeforeMake>
+ <AfterMake>
+ <RunUserProg1>1</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name>fromelf --bin --output .\rvmdk\timers.bin .\rvmdk\timers.axf</UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </AfterMake>
+ <SelectedForBatchBuild>0</SelectedForBatchBuild>
+ <SVCSIdString></SVCSIdString>
+ </TargetCommonOption>
+ <CommonProperty>
+ <UseCPPCompiler>0</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <DllOption>
+ <SimDllName>SARMCM3.DLL</SimDllName>
+ <SimDllArguments>-MPU</SimDllArguments>
+ <SimDlgDll>DCM.DLL</SimDlgDll>
+ <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+ <TargetDllName>SARMCM3.DLL</TargetDllName>
+ <TargetDllArguments>-MPU</TargetDllArguments>
+ <TargetDlgDll>TCM.DLL</TargetDlgDll>
+ <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+ </DllOption>
+ <DebugOption>
+ <OPTHX>
+ <HexSelection>1</HexSelection>
+ <HexRangeLowAddress>0</HexRangeLowAddress>
+ <HexRangeHighAddress>0</HexRangeHighAddress>
+ <HexOffset>0</HexOffset>
+ <Oh166RecLen>16</Oh166RecLen>
+ </OPTHX>
+ <Simulator>
+ <UseSimulator>0</UseSimulator>
+ <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+ <RunToMain>1</RunToMain>
+ <RestoreBreakpoints>1</RestoreBreakpoints>
+ <RestoreWatchpoints>1</RestoreWatchpoints>
+ <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+ <RestoreFunctions>1</RestoreFunctions>
+ <RestoreToolbox>1</RestoreToolbox>
+ <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+ </Simulator>
+ <Target>
+ <UseTarget>1</UseTarget>
+ <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+ <RunToMain>0</RunToMain>
+ <RestoreBreakpoints>1</RestoreBreakpoints>
+ <RestoreWatchpoints>1</RestoreWatchpoints>
+ <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+ <RestoreFunctions>0</RestoreFunctions>
+ <RestoreToolbox>1</RestoreToolbox>
+ </Target>
+ <RunDebugAfterBuild>0</RunDebugAfterBuild>
+ <TargetSelection>4</TargetSelection>
+ <SimDlls>
+ <CpuDll></CpuDll>
+ <CpuDllArguments></CpuDllArguments>
+ <PeripheralDll></PeripheralDll>
+ <PeripheralDllArguments></PeripheralDllArguments>
+ <InitializationFile></InitializationFile>
+ </SimDlls>
+ <TargetDlls>
+ <CpuDll></CpuDll>
+ <CpuDllArguments></CpuDllArguments>
+ <PeripheralDll></PeripheralDll>
+ <PeripheralDllArguments></PeripheralDllArguments>
+ <InitializationFile></InitializationFile>
+ <Driver>BIN\lmidk-agdi.dll</Driver>
+ </TargetDlls>
+ </DebugOption>
+ <Utilities>
+ <Flash1>
+ <UseTargetDll>1</UseTargetDll>
+ <UseExternalTool>0</UseExternalTool>
+ <RunIndependent>0</RunIndependent>
+ <UpdateFlashBeforeDebugging>0</UpdateFlashBeforeDebugging>
+ <Capability>1</Capability>
+ <DriverSelection>4099</DriverSelection>
+ </Flash1>
+ <Flash2>BIN\lmidk-agdi.dll</Flash2>
+ <Flash3></Flash3>
+ <Flash4></Flash4>
+ </Utilities>
+ <TargetArmAds>
+ <ArmAdsMisc>
+ <GenerateListings>0</GenerateListings>
+ <asHll>1</asHll>
+ <asAsm>1</asAsm>
+ <asMacX>1</asMacX>
+ <asSyms>1</asSyms>
+ <asFals>1</asFals>
+ <asDbgD>1</asDbgD>
+ <asForm>1</asForm>
+ <ldLst>0</ldLst>
+ <ldmm>1</ldmm>
+ <ldXref>1</ldXref>
+ <BigEnd>0</BigEnd>
+ <AdsALst>0</AdsALst>
+ <AdsACrf>0</AdsACrf>
+ <AdsANop>0</AdsANop>
+ <AdsANot>0</AdsANot>
+ <AdsLLst>1</AdsLLst>
+ <AdsLmap>1</AdsLmap>
+ <AdsLcgr>1</AdsLcgr>
+ <AdsLsym>1</AdsLsym>
+ <AdsLszi>1</AdsLszi>
+ <AdsLtoi>1</AdsLtoi>
+ <AdsLsun>1</AdsLsun>
+ <AdsLven>1</AdsLven>
+ <AdsLsxf>1</AdsLsxf>
+ <RvctClst>0</RvctClst>
+ <GenPPlst>0</GenPPlst>
+ <AdsCpuType>"Cortex-M4"</AdsCpuType>
+ <RvctDeviceName></RvctDeviceName>
+ <mOS>0</mOS>
+ <uocRom>0</uocRom>
+ <uocRam>0</uocRam>
+ <hadIROM>1</hadIROM>
+ <hadIRAM>1</hadIRAM>
+ <hadXRAM>0</hadXRAM>
+ <uocXRam>0</uocXRam>
+ <RvdsVP>2</RvdsVP>
+ <hadIRAM2>0</hadIRAM2>
+ <hadIROM2>0</hadIROM2>
+ <StupSel>8</StupSel>
+ <useUlib>1</useUlib>
+ <EndSel>0</EndSel>
+ <uLtcg>0</uLtcg>
+ <RoSelD>3</RoSelD>
+ <RwSelD>3</RwSelD>
+ <CodeSel>0</CodeSel>
+ <OptFeed>0</OptFeed>
+ <NoZi1>0</NoZi1>
+ <NoZi2>0</NoZi2>
+ <NoZi3>0</NoZi3>
+ <NoZi4>0</NoZi4>
+ <NoZi5>0</NoZi5>
+ <Ro1Chk>0</Ro1Chk>
+ <Ro2Chk>0</Ro2Chk>
+ <Ro3Chk>0</Ro3Chk>
+ <Ir1Chk>1</Ir1Chk>
+ <Ir2Chk>0</Ir2Chk>
+ <Ra1Chk>0</Ra1Chk>
+ <Ra2Chk>0</Ra2Chk>
+ <Ra3Chk>0</Ra3Chk>
+ <Im1Chk>1</Im1Chk>
+ <Im2Chk>0</Im2Chk>
+ <OnChipMemories>
+ <Ocm1>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm1>
+ <Ocm2>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm2>
+ <Ocm3>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm3>
+ <Ocm4>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm4>
+ <Ocm5>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm5>
+ <Ocm6>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm6>
+ <IRAM>
+ <Type>0</Type>
+ <StartAddress>0x20000000</StartAddress>
+ <Size>0x8000</Size>
+ </IRAM>
+ <IROM>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x40000</Size>
+ </IROM>
+ <XRAM>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </XRAM>
+ <OCR_RVCT1>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT1>
+ <OCR_RVCT2>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT2>
+ <OCR_RVCT3>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT3>
+ <OCR_RVCT4>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x40000</Size>
+ </OCR_RVCT4>
+ <OCR_RVCT5>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT5>
+ <OCR_RVCT6>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT6>
+ <OCR_RVCT7>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT7>
+ <OCR_RVCT8>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT8>
+ <OCR_RVCT9>
+ <Type>0</Type>
+ <StartAddress>0x20000000</StartAddress>
+ <Size>0x8000</Size>
+ </OCR_RVCT9>
+ <OCR_RVCT10>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT10>
+ </OnChipMemories>
+ <RvctStartVector></RvctStartVector>
+ </ArmAdsMisc>
+ <Cads>
+ <interw>0</interw>
+ <Optim>3</Optim>
+ <oTime>0</oTime>
+ <SplitLS>0</SplitLS>
+ <OneElfS>1</OneElfS>
+ <Strict>0</Strict>
+ <EnumInt>0</EnumInt>
+ <PlainCh>0</PlainCh>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <wLevel>2</wLevel>
+ <uThumb>0</uThumb>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define>rvmdk PART_TM4C123GH6PM TARGET_IS_TM4C123_RB1</Define>
+ <Undefine></Undefine>
+ <IncludePath>..\..\..\..;</IncludePath>
+ </VariousControls>
+ </Cads>
+ <Aads>
+ <interw>1</interw>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <thumb>0</thumb>
+ <SplitLS>0</SplitLS>
+ <SwStkChk>0</SwStkChk>
+ <NoWarn>0</NoWarn>
+ <VariousControls>
+ <MiscControls></MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Aads>
+ <LDads>
+ <umfTarg>0</umfTarg>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <noStLib>0</noStLib>
+ <RepFail>1</RepFail>
+ <useFile>0</useFile>
+ <TextAddressRange>0x00000000</TextAddressRange>
+ <DataAddressRange>0x20000000</DataAddressRange>
+ <ScatterFile>timers.sct</ScatterFile>
+ <IncludeLibs></IncludeLibs>
+ <IncludeLibsPath></IncludeLibsPath>
+ <Misc>--entry Reset_Handler</Misc>
+ <LinkerInputFile></LinkerInputFile>
+ <DisabledWarnings></DisabledWarnings>
+ </LDads>
+ </TargetArmAds>
+ </TargetOption>
+ <Groups>
+ <Group>
+ <GroupName>Source</GroupName>
+ <Files>
+ <File>
+ <FileName>startup_rvmdk.S</FileName>
+ <FileType>2</FileType>
+ <FilePath>.\startup_rvmdk.S</FilePath>
+ </File>
+ <File>
+ <FileName>timers.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>.\timers.c</FilePath>
+ </File>
+ <File>
+ <FileName>uartstdio.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>..\..\..\..\utils\uartstdio.c</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>Libraries</GroupName>
+ <Files>
+ <File>
+ <FileName>driverlib.lib</FileName>
+ <FileType>4</FileType>
+ <FilePath>..\..\..\..\driverlib\rvmdk\driverlib.lib</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>Documentation</GroupName>
+ <Files>
+ <File>
+ <FileName>readme.txt</FileName>
+ <FileType>5</FileType>
+ <FilePath>.\readme.txt</FilePath>
+ </File>
+ </Files>
+ </Group>
+ </Groups>
+ </Target>
+ </Targets>
+
+</Project>
diff --git a/boards/ek-tm4c123gxl/timers/timers_ccs.cmd b/boards/ek-tm4c123gxl/timers/timers_ccs.cmd new file mode 100644 index 0000000..ebadc78 --- /dev/null +++ b/boards/ek-tm4c123gxl/timers/timers_ccs.cmd @@ -0,0 +1,70 @@ +/******************************************************************************
+ *
+ * timers_ccs.cmd - CCS linker configuration file for timers.
+ *
+ * Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+ * Software License Agreement
+ *
+ * Texas Instruments (TI) is supplying this software for use solely and
+ * exclusively on TI's microcontroller products. The software is owned by
+ * TI and/or its suppliers, and is protected under applicable copyright
+ * laws. You may not combine this software with "viral" open-source
+ * software in order to form a larger program.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+ * NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+ * NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+ * CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+ * DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ * This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+ *
+ *****************************************************************************/
+
+--retain=g_pfnVectors
+
+/* The following command line options are set as part of the CCS project. */
+/* If you are building using the command line, or for some reason want to */
+/* define them here, you can uncomment and modify these lines as needed. */
+/* If you are using CCS for building, it is probably better to make any such */
+/* modifications in your CCS project and leave this file alone. */
+/* */
+/* --heap_size=0 */
+/* --stack_size=256 */
+/* --library=rtsv7M3_T_le_eabi.lib */
+
+/* The starting address of the application. Normally the interrupt vectors */
+/* must be located at the beginning of the application. */
+#define APP_BASE 0x00000000
+#define RAM_BASE 0x20000000
+
+/* System memory map */
+
+MEMORY
+{
+ /* Application stored in and executes from internal flash */
+ FLASH (RX) : origin = APP_BASE, length = 0x00040000
+ /* Application uses internal RAM for data */
+ SRAM (RWX) : origin = 0x20000000, length = 0x00008000
+}
+
+/* Section allocation in memory */
+
+SECTIONS
+{
+ .intvecs: > APP_BASE
+ .text : > FLASH
+ .const : > FLASH
+ .cinit : > FLASH
+ .pinit : > FLASH
+ .init_array : > FLASH
+
+ .vtable : > RAM_BASE
+ .data : > SRAM
+ .bss : > SRAM
+ .sysmem : > SRAM
+ .stack : > SRAM
+}
+
+__STACK_TOP = __stack + 256;
diff --git a/boards/ek-tm4c123gxl/uart_echo/Makefile b/boards/ek-tm4c123gxl/uart_echo/Makefile new file mode 100644 index 0000000..7bcd0d4 --- /dev/null +++ b/boards/ek-tm4c123gxl/uart_echo/Makefile @@ -0,0 +1,79 @@ +#******************************************************************************
+#
+# Makefile - Rules for building the uart_echo example.
+#
+# Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+# Software License Agreement
+#
+# Texas Instruments (TI) is supplying this software for use solely and
+# exclusively on TI's microcontroller products. The software is owned by
+# TI and/or its suppliers, and is protected under applicable copyright
+# laws. You may not combine this software with "viral" open-source
+# software in order to form a larger program.
+#
+# THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+# NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+# NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+# CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+# DAMAGES, FOR ANY REASON WHATSOEVER.
+#
+# This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+#
+#******************************************************************************
+
+#
+# Defines the part type that this project uses.
+#
+PART=TM4C123GH6PM
+
+#
+# The base directory for TivaWare.
+#
+ROOT=../../../..
+
+#
+# Include the common make definitions.
+#
+include ${ROOT}/makedefs
+
+#
+# Where to find header files that do not live in the source directory.
+#
+IPATH=../../../..
+
+#
+# The default rule, which causes the uart_echo example to be built.
+#
+all: ${COMPILER}
+all: ${COMPILER}/uart_echo.axf
+
+#
+# The rule to clean out all the build products.
+#
+clean:
+ @rm -rf ${COMPILER} ${wildcard *~}
+
+#
+# The rule to create the target directory.
+#
+${COMPILER}:
+ @mkdir -p ${COMPILER}
+
+#
+# Rules for building the uart_echo example.
+#
+${COMPILER}/uart_echo.axf: ${COMPILER}/startup_${COMPILER}.o
+${COMPILER}/uart_echo.axf: ${COMPILER}/uart_echo.o
+${COMPILER}/uart_echo.axf: ${ROOT}/driverlib/${COMPILER}/libdriver.a
+${COMPILER}/uart_echo.axf: uart_echo.ld
+SCATTERgcc_uart_echo=uart_echo.ld
+ENTRY_uart_echo=ResetISR
+CFLAGSgcc=-DTARGET_IS_TM4C123_RB1
+
+#
+# Include the automatically generated dependency files.
+#
+ifneq (${MAKECMDGOALS},clean)
+-include ${wildcard ${COMPILER}/*.d} __dummy__
+endif
diff --git a/boards/ek-tm4c123gxl/uart_echo/ccs/.ccsimportspec b/boards/ek-tm4c123gxl/uart_echo/ccs/.ccsimportspec new file mode 100644 index 0000000..9a02fa9 --- /dev/null +++ b/boards/ek-tm4c123gxl/uart_echo/ccs/.ccsimportspec @@ -0,0 +1,8 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<importSpec>
+ <source root="..">
+ <file name="uart_echo.c"/>
+ <file regex=".*_ccs\.cmd"/>
+ <file name="startup_ccs.c"/>
+ </source>
+</importSpec>
diff --git a/boards/ek-tm4c123gxl/uart_echo/ccs/.ccsproject b/boards/ek-tm4c123gxl/uart_echo/ccs/.ccsproject new file mode 100644 index 0000000..75fb50e --- /dev/null +++ b/boards/ek-tm4c123gxl/uart_echo/ccs/.ccsproject @@ -0,0 +1,10 @@ +<?xml version="1.0" encoding="UTF-8" ?>
+<?ccsproject version="1.0"?>
+<projectOptions>
+ <deviceVariant value="Cortex M.TM4C123GH6PM"/>
+ <deviceFamily value="TMS470"/>
+ <deviceEndianness value="little"/>
+ <codegenToolVersion value="5.0.4"/>
+ <isElfFormat value="true"/>
+ <rts value="libc.a"/>
+</projectOptions>
diff --git a/boards/ek-tm4c123gxl/uart_echo/ccs/.cproject b/boards/ek-tm4c123gxl/uart_echo/ccs/.cproject new file mode 100644 index 0000000..9030268 --- /dev/null +++ b/boards/ek-tm4c123gxl/uart_echo/ccs/.cproject @@ -0,0 +1,187 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+ <storageModule configRelations="2" moduleId="org.eclipse.cdt.core.settings">
+ <cconfiguration id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1016672723">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1016672723" moduleId="org.eclipse.cdt.core.settings" name="Debug">
+ <macros>
+ <stringMacro name="SW_ROOT" type="VALUE_PATH_DIR" value="${PROJECT_ROOT}/../../../../.."/>
+ </macros>
+ <externalSettings/>
+ <extensions>
+ <extension id="com.ti.ccstudio.binaryparser.CoffParser" point="org.eclipse.cdt.core.BinaryParser"/>
+ <extension id="com.ti.ccstudio.errorparser.CoffErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.LinkErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.AsmErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactExtension="out" artifactName="${ProjName}" buildProperties="" cleanCommand="${CG_CLEAN_CMD}" description="" id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1016672723" name="Debug" parent="com.ti.ccstudio.buildDefinitions.TMS470.Debug" postbuildStep=""${CCE_INSTALL_ROOT}/utils/tiobj2bin/tiobj2bin" "${BuildArtifactFileName}" "${BuildArtifactFileBaseName}.bin" "${CG_TOOL_ROOT}/bin/armofd" "${CG_TOOL_ROOT}/bin/armhex" "${CCE_INSTALL_ROOT}/utils/tiobj2bin/mkhex4bin"">
+ <folderInfo id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1016672723." name="/" resourcePath="">
+ <toolChain id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.DebugToolchain.1338619937" name="TI Build Tools" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.DebugToolchain" targetTool="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug.1417926574">
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS.2092442904" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS" valueType="stringList">
+ <listOptionValue builtIn="false" value="DEVICE_CONFIGURATION_ID=Cortex M.TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="DEVICE_ENDIANNESS=little"/>
+ <listOptionValue builtIn="false" value="OUTPUT_FORMAT=ELF"/>
+ <listOptionValue builtIn="false" value="CCS_MBS_VERSION=5.1.0.01"/>
+ <listOptionValue builtIn="false" value="RUNTIME_SUPPORT_LIBRARY=libc.a"/>
+ <listOptionValue builtIn="false" value="OUTPUT_TYPE=executable"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION.1942321275" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION" value="5.0.4" valueType="string"/>
+ <targetPlatform id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformDebug.1568327554" name="Platform" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformDebug"/>
+ <builder buildPath="${BuildDirectory}" id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderDebug.1490675424" name="GNU Make.Debug" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderDebug"/>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerDebug.1000836104" name="ARM Compiler" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerDebug">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.644358779" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.7M4" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.343967756" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.1175610787" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.eabi" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.1137147897" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.FPv4SPD16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL.868250604" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL.SYMDEBUG__DWARF" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING.15395940" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING" valueType="stringList">
+ <listOptionValue builtIn="false" value="225"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER.1849984600" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.1190666486" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH.1101120712" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH" valueType="includePath">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN.1304559264" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.1365321454" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.on" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL.530420215" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL.2" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC.1274182964" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL.591469457" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE.1015081568" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE" valueType="definedSymbols">
+ <listOptionValue builtIn="false" value="ccs="ccs""/>
+ <listOptionValue builtIn="false" value="PART_TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="TARGET_IS_TM4C123_RB1"/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS.1469179193" name="C Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS.1256917629" name="C++ Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS.1863498856" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS.1285535730" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS"/>
+ </tool>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug.1417926574" name="ARM Linker" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE.1968815692" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE" value=""uart_echo_ccs.map"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE.1811908843" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE" value="256" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE.547135233" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE" value="0" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE.2112252575" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE" value=""${ProjName}.out"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO.2064360238" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO" value=""${ProjName}_linkInfo.xml"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER.1456169147" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.1072369966" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH.1929504124" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH" valueType="libPaths">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/lib""/>
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY.378460377" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY" valueType="libs">
+ <listOptionValue builtIn="false" value=""libc.a""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/driverlib/ccs/Debug/driverlib.lib""/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS.1075851787" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS.159141785" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS.1308686393" name="Generated Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS"/>
+ </tool>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ <cconfiguration id="com.ti.ccstudio.buildDefinitions.TMS470.Release.1936282330">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.ti.ccstudio.buildDefinitions.TMS470.Release.1936282330" moduleId="org.eclipse.cdt.core.settings" name="Release">
+ <macros>
+ <stringMacro name="SW_ROOT" type="VALUE_PATH_DIR" value="${PROJECT_ROOT}/../../../../.."/>
+ </macros>
+ <externalSettings/>
+ <extensions>
+ <extension id="com.ti.ccstudio.binaryparser.CoffParser" point="org.eclipse.cdt.core.BinaryParser"/>
+ <extension id="com.ti.ccstudio.errorparser.CoffErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.LinkErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.AsmErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactExtension="out" artifactName="${ProjName}" buildProperties="" cleanCommand="${CG_CLEAN_CMD}" description="" id="com.ti.ccstudio.buildDefinitions.TMS470.Release.1936282330" name="Release" parent="com.ti.ccstudio.buildDefinitions.TMS470.Release" postbuildStep=""${CCE_INSTALL_ROOT}/utils/tiobj2bin/tiobj2bin" "${BuildArtifactFileName}" "${BuildArtifactFileBaseName}.bin" "${CG_TOOL_ROOT}/bin/armofd" "${CG_TOOL_ROOT}/bin/armhex" "${CCE_INSTALL_ROOT}/utils/tiobj2bin/mkhex4bin"">
+ <folderInfo id="com.ti.ccstudio.buildDefinitions.TMS470.Release.1936282330." name="/" resourcePath="">
+ <toolChain id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.ReleaseToolchain.316624268" name="TI Build Tools" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.ReleaseToolchain" targetTool="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease.1526839996">
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS.679871193" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS" valueType="stringList">
+ <listOptionValue builtIn="false" value="DEVICE_CONFIGURATION_ID=Cortex M.TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="DEVICE_ENDIANNESS=little"/>
+ <listOptionValue builtIn="false" value="OUTPUT_FORMAT=ELF"/>
+ <listOptionValue builtIn="false" value="CCS_MBS_VERSION=5.1.0.01"/>
+ <listOptionValue builtIn="false" value="RUNTIME_SUPPORT_LIBRARY=libc.a"/>
+ <listOptionValue builtIn="false" value="OUTPUT_TYPE=executable"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION.878245268" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION" value="5.0.4" valueType="string"/>
+ <targetPlatform id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformRelease.2121647676" name="Platform" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformRelease"/>
+ <builder buildPath="${BuildDirectory}" id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderRelease.1121224380" name="GNU Make.Release" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderRelease"/>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerRelease.1403239368" name="ARM Compiler" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerRelease">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.1641506999" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.7M4" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.1634916407" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.1234249112" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.eabi" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.1189001493" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.FPv4SPD16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING.252460845" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING" valueType="stringList">
+ <listOptionValue builtIn="false" value="225"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER.1310159334" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.1983316916" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH.1769763508" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH" valueType="includePath">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN.1356566414" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.1019770100" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.on" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC.1630119658" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL.917237757" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE.77792157" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE" valueType="definedSymbols">
+ <listOptionValue builtIn="false" value="ccs="ccs""/>
+ <listOptionValue builtIn="false" value="PART_TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="TARGET_IS_TM4C123_RB1"/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS.152158609" name="C Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS.1876496870" name="C++ Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS.502497792" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS.1723484819" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS"/>
+ </tool>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease.1526839996" name="ARM Linker" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE.326590900" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE" value=""uart_echo_ccs.map"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE.2124013672" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE" value="256" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE.1928287173" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE" value="0" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE.491938990" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE" value=""${ProjName}.out"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO.1655348092" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO" value=""${ProjName}_linkInfo.xml"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER.1242171961" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.1129253277" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH.2044350066" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH" valueType="libPaths">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/lib""/>
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY.240241195" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY" valueType="libs">
+ <listOptionValue builtIn="false" value=""libc.a""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/driverlib/ccs/Debug/driverlib.lib""/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS.1765666721" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS.459119244" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS.1018682286" name="Generated Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS"/>
+ </tool>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <project id="uart_echo.com.ti.ccstudio.buildDefinitions.TMS470.ProjectType.638838178" name="ARM" projectType="com.ti.ccstudio.buildDefinitions.TMS470.ProjectType"/>
+ </storageModule>
+ <storageModule moduleId="scannerConfiguration"/>
+ <storageModule moduleId="org.eclipse.cdt.core.language.mapping">
+ <project-mappings>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.asmSource" language="com.ti.ccstudio.core.TIASMLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cHeader" language="com.ti.ccstudio.core.TIGCCLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cSource" language="com.ti.ccstudio.core.TIGCCLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cxxHeader" language="com.ti.ccstudio.core.TIGPPLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cxxSource" language="com.ti.ccstudio.core.TIGPPLanguage"/>
+ </project-mappings>
+ </storageModule>
+</cproject>
diff --git a/boards/ek-tm4c123gxl/uart_echo/ccs/.project b/boards/ek-tm4c123gxl/uart_echo/ccs/.project new file mode 100644 index 0000000..f87737d --- /dev/null +++ b/boards/ek-tm4c123gxl/uart_echo/ccs/.project @@ -0,0 +1,50 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+ <name>uart_echo</name>
+ <comment></comment>
+ <projects>
+ </projects>
+ <buildSpec>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+ <triggers>full,incremental,</triggers>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ </buildSpec>
+ <natures>
+ <nature>com.ti.ccstudio.core.ccsNature</nature>
+ <nature>org.eclipse.cdt.core.cnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+ <nature>org.eclipse.cdt.core.ccnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+ </natures>
+ <linkedResources>
+ <link>
+ <name>startup_ccs.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/uart_echo/startup_ccs.c</locationURI>
+ </link>
+ <link>
+ <name>uart_echo.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/uart_echo/uart_echo.c</locationURI>
+ </link>
+ <link>
+ <name>uart_echo_ccs.cmd</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/uart_echo/uart_echo_ccs.cmd</locationURI>
+ </link>
+ </linkedResources>
+ <variableList>
+ <variable>
+ <name>SW_ROOT</name>
+ <value>$%7BPARENT-5-PROJECT_LOC%7D</value>
+ </variable>
+ </variableList>
+</projectDescription>
diff --git a/boards/ek-tm4c123gxl/uart_echo/ccs/.settings/org.eclipse.cdt.codan.core.prefs b/boards/ek-tm4c123gxl/uart_echo/ccs/.settings/org.eclipse.cdt.codan.core.prefs new file mode 100644 index 0000000..98b6350 --- /dev/null +++ b/boards/ek-tm4c123gxl/uart_echo/ccs/.settings/org.eclipse.cdt.codan.core.prefs @@ -0,0 +1,3 @@ +eclipse.preferences.version=1
+inEditor=false
+onBuild=false
diff --git a/boards/ek-tm4c123gxl/uart_echo/ccs/Debug/uart_echo.bin b/boards/ek-tm4c123gxl/uart_echo/ccs/Debug/uart_echo.bin Binary files differnew file mode 100644 index 0000000..c2cf780 --- /dev/null +++ b/boards/ek-tm4c123gxl/uart_echo/ccs/Debug/uart_echo.bin diff --git a/boards/ek-tm4c123gxl/uart_echo/ccs/Debug/uart_echo.out b/boards/ek-tm4c123gxl/uart_echo/ccs/Debug/uart_echo.out Binary files differnew file mode 100644 index 0000000..a9dc628 --- /dev/null +++ b/boards/ek-tm4c123gxl/uart_echo/ccs/Debug/uart_echo.out diff --git a/boards/ek-tm4c123gxl/uart_echo/ccs/macros.ini_initial b/boards/ek-tm4c123gxl/uart_echo/ccs/macros.ini_initial new file mode 100644 index 0000000..31214b5 --- /dev/null +++ b/boards/ek-tm4c123gxl/uart_echo/ccs/macros.ini_initial @@ -0,0 +1 @@ +SW_ROOT = ../../../../..
diff --git a/boards/ek-tm4c123gxl/uart_echo/ccs/target_config.ccxml b/boards/ek-tm4c123gxl/uart_echo/ccs/target_config.ccxml new file mode 100644 index 0000000..be4342a --- /dev/null +++ b/boards/ek-tm4c123gxl/uart_echo/ccs/target_config.ccxml @@ -0,0 +1,13 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<configurations XML_version="1.2" id="configurations_0">
+ <configuration XML_version="1.2" id="Stellaris In-Circuit Debug Interface_0">
+ <instance XML_version="1.2" desc="Stellaris In-Circuit Debug Interface_0" href="connections/Stellaris_ICDI_Connection.xml" id="Stellaris In-Circuit Debug Interface_0" xml="Stellaris_ICDI_Connection.xml" xmlpath="connections"/>
+ <connection XML_version="1.2" id="Stellaris In-Circuit Debug Interface_0">
+ <instance XML_version="1.2" href="drivers/stellaris_cs_dap.xml" id="drivers" xml="stellaris_cs_dap.xml" xmlpath="drivers"/>
+ <instance XML_version="1.2" href="drivers/stellaris_cortex_m4.xml" id="drivers" xml="stellaris_cortex_m4.xml" xmlpath="drivers"/>
+ <platform XML_version="1.2" id="platform_0">
+ <instance XML_version="1.2" desc="Stellaris TM4C123GH6PM_0" href="devices/tm4c123gh6pm.xml" id="Stellaris TM4C123GH6PM_0" xml="tm4c123gh6pm.xml" xmlpath="devices"/>
+ </platform>
+ </connection>
+ </configuration>
+</configurations>
diff --git a/boards/ek-tm4c123gxl/uart_echo/ewarm/Exe/uart_echo.bin b/boards/ek-tm4c123gxl/uart_echo/ewarm/Exe/uart_echo.bin Binary files differnew file mode 100644 index 0000000..4ae467b --- /dev/null +++ b/boards/ek-tm4c123gxl/uart_echo/ewarm/Exe/uart_echo.bin diff --git a/boards/ek-tm4c123gxl/uart_echo/ewarm/Exe/uart_echo.out b/boards/ek-tm4c123gxl/uart_echo/ewarm/Exe/uart_echo.out Binary files differnew file mode 100644 index 0000000..1e36cc7 --- /dev/null +++ b/boards/ek-tm4c123gxl/uart_echo/ewarm/Exe/uart_echo.out diff --git a/boards/ek-tm4c123gxl/uart_echo/gcc/uart_echo.axf b/boards/ek-tm4c123gxl/uart_echo/gcc/uart_echo.axf Binary files differnew file mode 100644 index 0000000..c37fd88 --- /dev/null +++ b/boards/ek-tm4c123gxl/uart_echo/gcc/uart_echo.axf diff --git a/boards/ek-tm4c123gxl/uart_echo/gcc/uart_echo.bin b/boards/ek-tm4c123gxl/uart_echo/gcc/uart_echo.bin Binary files differnew file mode 100644 index 0000000..0822d57 --- /dev/null +++ b/boards/ek-tm4c123gxl/uart_echo/gcc/uart_echo.bin diff --git a/boards/ek-tm4c123gxl/uart_echo/readme.txt b/boards/ek-tm4c123gxl/uart_echo/readme.txt new file mode 100644 index 0000000..97d4d4a --- /dev/null +++ b/boards/ek-tm4c123gxl/uart_echo/readme.txt @@ -0,0 +1,26 @@ +UART Echo
+
+This example application utilizes the UART to echo text. The first UART
+(connected to the USB debug virtual serial port on the evaluation board)
+will be configured in 115,200 baud, 8-n-1 mode. All characters received on
+the UART are transmitted back to the UART.
+
+-------------------------------------------------------------------------------
+
+Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+Software License Agreement
+
+Texas Instruments (TI) is supplying this software for use solely and
+exclusively on TI's microcontroller products. The software is owned by
+TI and/or its suppliers, and is protected under applicable copyright
+laws. You may not combine this software with "viral" open-source
+software in order to form a larger program.
+
+THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+DAMAGES, FOR ANY REASON WHATSOEVER.
+
+This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
diff --git a/boards/ek-tm4c123gxl/uart_echo/rvmdk/uart_echo.axf b/boards/ek-tm4c123gxl/uart_echo/rvmdk/uart_echo.axf Binary files differnew file mode 100644 index 0000000..696b287 --- /dev/null +++ b/boards/ek-tm4c123gxl/uart_echo/rvmdk/uart_echo.axf diff --git a/boards/ek-tm4c123gxl/uart_echo/rvmdk/uart_echo.bin b/boards/ek-tm4c123gxl/uart_echo/rvmdk/uart_echo.bin Binary files differnew file mode 100644 index 0000000..bddc20c --- /dev/null +++ b/boards/ek-tm4c123gxl/uart_echo/rvmdk/uart_echo.bin diff --git a/boards/ek-tm4c123gxl/uart_echo/startup_ccs.c b/boards/ek-tm4c123gxl/uart_echo/startup_ccs.c new file mode 100644 index 0000000..ff58c3e --- /dev/null +++ b/boards/ek-tm4c123gxl/uart_echo/startup_ccs.c @@ -0,0 +1,302 @@ +//*****************************************************************************
+//
+// startup_ccs.c - Startup code for use with TI's Code Composer Studio.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// External declaration for the reset handler that is to be called when the
+// processor is started
+//
+//*****************************************************************************
+extern void _c_int00(void);
+
+//*****************************************************************************
+//
+// Linker variable that marks the top of the stack.
+//
+//*****************************************************************************
+extern uint32_t __STACK_TOP;
+
+//*****************************************************************************
+//
+// External declaration for the interrupt handler used by the application.
+//
+//*****************************************************************************
+extern void UARTIntHandler(void);
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000 or at the start of
+// the program if located at a start address other than 0.
+//
+//*****************************************************************************
+#pragma DATA_SECTION(g_pfnVectors, ".intvecs")
+void (* const g_pfnVectors[])(void) =
+{
+ (void (*)(void))((uint32_t)&__STACK_TOP),
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ IntDefaultHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ UARTIntHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ IntDefaultHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ //
+ // Jump to the CCS C initialization routine. This will enable the
+ // floating-point unit as well, so that does not need to be done here.
+ //
+ __asm(" .global _c_int00\n"
+ " b.w _c_int00");
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/uart_echo/startup_ewarm.c b/boards/ek-tm4c123gxl/uart_echo/startup_ewarm.c new file mode 100644 index 0000000..90e1797 --- /dev/null +++ b/boards/ek-tm4c123gxl/uart_echo/startup_ewarm.c @@ -0,0 +1,333 @@ +//*****************************************************************************
+//
+// startup_ewarm.c - Startup code for use with IAR's Embedded Workbench,
+// version 5.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Enable the IAR extensions for this source file.
+//
+//*****************************************************************************
+#pragma language=extended
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// External declaration for the interrupt handler used by the application.
+//
+//*****************************************************************************
+extern void UARTIntHandler(void);
+
+//*****************************************************************************
+//
+// The entry point for the application startup code.
+//
+//*****************************************************************************
+extern void __iar_program_start(void);
+
+//*****************************************************************************
+//
+// Reserve space for the system stack.
+//
+//*****************************************************************************
+static uint32_t pui32Stack[64] @ ".noinit";
+
+//*****************************************************************************
+//
+// A union that describes the entries of the vector table. The union is needed
+// since the first entry is the stack pointer and the remainder are function
+// pointers.
+//
+//*****************************************************************************
+typedef union
+{
+ void (*pfnHandler)(void);
+ uint32_t ui32Ptr;
+}
+uVectorEntry;
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000.
+//
+//*****************************************************************************
+__root const uVectorEntry __vector_table[] @ ".intvec" =
+{
+ { .ui32Ptr = (uint32_t)pui32Stack + sizeof(pui32Stack) },
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ IntDefaultHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ UARTIntHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ IntDefaultHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ //
+ // Enable the floating-point unit. This must be done here to handle the
+ // case where main() uses floating-point and the function prologue saves
+ // floating-point registers (which will fault if floating-point is not
+ // enabled). Any configuration of the floating-point unit using DriverLib
+ // APIs must be done here prior to the floating-point unit being enabled.
+ //
+ // Note that this does not use DriverLib since it might not be included in
+ // this project.
+ //
+ HWREG(NVIC_CPAC) = ((HWREG(NVIC_CPAC) &
+ ~(NVIC_CPAC_CP10_M | NVIC_CPAC_CP11_M)) |
+ NVIC_CPAC_CP10_FULL | NVIC_CPAC_CP11_FULL);
+
+ //
+ // Call the application's entry point.
+ //
+ __iar_program_start();
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/uart_echo/startup_gcc.c b/boards/ek-tm4c123gxl/uart_echo/startup_gcc.c new file mode 100644 index 0000000..9b46bed --- /dev/null +++ b/boards/ek-tm4c123gxl/uart_echo/startup_gcc.c @@ -0,0 +1,349 @@ +//*****************************************************************************
+//
+// startup_gcc.c - Startup code for use with GNU tools.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// External declaration for the interrupt handler used by the application.
+//
+//*****************************************************************************
+extern void UARTIntHandler(void);
+
+//*****************************************************************************
+//
+// The entry point for the application.
+//
+//*****************************************************************************
+extern int main(void);
+
+//*****************************************************************************
+//
+// Reserve space for the system stack.
+//
+//*****************************************************************************
+static uint32_t pui32Stack[64];
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000.
+//
+//*****************************************************************************
+__attribute__ ((section(".isr_vector")))
+void (* const g_pfnVectors[])(void) =
+{
+ (void (*)(void))((uint32_t)pui32Stack + sizeof(pui32Stack)),
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ IntDefaultHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ UARTIntHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ IntDefaultHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// The following are constructs created by the linker, indicating where the
+// the "data" and "bss" segments reside in memory. The initializers for the
+// for the "data" segment resides immediately following the "text" segment.
+//
+//*****************************************************************************
+extern uint32_t _etext;
+extern uint32_t _data;
+extern uint32_t _edata;
+extern uint32_t _bss;
+extern uint32_t _ebss;
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ uint32_t *pui32Src, *pui32Dest;
+
+ //
+ // Copy the data segment initializers from flash to SRAM.
+ //
+ pui32Src = &_etext;
+ for(pui32Dest = &_data; pui32Dest < &_edata; )
+ {
+ *pui32Dest++ = *pui32Src++;
+ }
+
+ //
+ // Zero fill the bss segment.
+ //
+ __asm(" ldr r0, =_bss\n"
+ " ldr r1, =_ebss\n"
+ " mov r2, #0\n"
+ " .thumb_func\n"
+ "zero_loop:\n"
+ " cmp r0, r1\n"
+ " it lt\n"
+ " strlt r2, [r0], #4\n"
+ " blt zero_loop");
+
+ //
+ // Enable the floating-point unit. This must be done here to handle the
+ // case where main() uses floating-point and the function prologue saves
+ // floating-point registers (which will fault if floating-point is not
+ // enabled). Any configuration of the floating-point unit using DriverLib
+ // APIs must be done here prior to the floating-point unit being enabled.
+ //
+ // Note that this does not use DriverLib since it might not be included in
+ // this project.
+ //
+ HWREG(NVIC_CPAC) = ((HWREG(NVIC_CPAC) &
+ ~(NVIC_CPAC_CP10_M | NVIC_CPAC_CP11_M)) |
+ NVIC_CPAC_CP10_FULL | NVIC_CPAC_CP11_FULL);
+
+ //
+ // Call the application's entry point.
+ //
+ main();
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/uart_echo/startup_rvmdk.S b/boards/ek-tm4c123gxl/uart_echo/startup_rvmdk.S new file mode 100644 index 0000000..55fd402 --- /dev/null +++ b/boards/ek-tm4c123gxl/uart_echo/startup_rvmdk.S @@ -0,0 +1,358 @@ +; <<< Use Configuration Wizard in Context Menu >>>
+;******************************************************************************
+;
+; startup_rvmdk.S - Startup code for use with Keil's uVision.
+;
+; Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+; Software License Agreement
+;
+; Texas Instruments (TI) is supplying this software for use solely and
+; exclusively on TI's microcontroller products. The software is owned by
+; TI and/or its suppliers, and is protected under applicable copyright
+; laws. You may not combine this software with "viral" open-source
+; software in order to form a larger program.
+;
+; THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+; NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+; NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+; A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+; CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+; DAMAGES, FOR ANY REASON WHATSOEVER.
+;
+; This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+;
+;******************************************************************************
+
+;******************************************************************************
+;
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+;******************************************************************************
+Stack EQU 0x00000100
+
+;******************************************************************************
+;
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+;******************************************************************************
+Heap EQU 0x00000000
+
+;******************************************************************************
+;
+; Allocate space for the stack.
+;
+;******************************************************************************
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+StackMem
+ SPACE Stack
+__initial_sp
+
+;******************************************************************************
+;
+; Allocate space for the heap.
+;
+;******************************************************************************
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+HeapMem
+ SPACE Heap
+__heap_limit
+
+;******************************************************************************
+;
+; Indicate that the code in this file preserves 8-byte alignment of the stack.
+;
+;******************************************************************************
+ PRESERVE8
+
+;******************************************************************************
+;
+; Place code into the reset code section.
+;
+;******************************************************************************
+ AREA RESET, CODE, READONLY
+ THUMB
+
+;******************************************************************************
+;
+; External declaration for the interrupt handler used by the application.
+;
+;******************************************************************************
+ EXTERN UARTIntHandler
+
+;******************************************************************************
+;
+; The vector table.
+;
+;******************************************************************************
+ EXPORT __Vectors
+__Vectors
+ DCD StackMem + Stack ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NmiSR ; NMI Handler
+ DCD FaultISR ; Hard Fault Handler
+ DCD IntDefaultHandler ; The MPU fault handler
+ DCD IntDefaultHandler ; The bus fault handler
+ DCD IntDefaultHandler ; The usage fault handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; SVCall handler
+ DCD IntDefaultHandler ; Debug monitor handler
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; The PendSV handler
+ DCD IntDefaultHandler ; The SysTick handler
+ DCD IntDefaultHandler ; GPIO Port A
+ DCD IntDefaultHandler ; GPIO Port B
+ DCD IntDefaultHandler ; GPIO Port C
+ DCD IntDefaultHandler ; GPIO Port D
+ DCD IntDefaultHandler ; GPIO Port E
+ DCD UARTIntHandler ; UART0 Rx and Tx
+ DCD IntDefaultHandler ; UART1 Rx and Tx
+ DCD IntDefaultHandler ; SSI0 Rx and Tx
+ DCD IntDefaultHandler ; I2C0 Master and Slave
+ DCD IntDefaultHandler ; PWM Fault
+ DCD IntDefaultHandler ; PWM Generator 0
+ DCD IntDefaultHandler ; PWM Generator 1
+ DCD IntDefaultHandler ; PWM Generator 2
+ DCD IntDefaultHandler ; Quadrature Encoder 0
+ DCD IntDefaultHandler ; ADC Sequence 0
+ DCD IntDefaultHandler ; ADC Sequence 1
+ DCD IntDefaultHandler ; ADC Sequence 2
+ DCD IntDefaultHandler ; ADC Sequence 3
+ DCD IntDefaultHandler ; Watchdog timer
+ DCD IntDefaultHandler ; Timer 0 subtimer A
+ DCD IntDefaultHandler ; Timer 0 subtimer B
+ DCD IntDefaultHandler ; Timer 1 subtimer A
+ DCD IntDefaultHandler ; Timer 1 subtimer B
+ DCD IntDefaultHandler ; Timer 2 subtimer A
+ DCD IntDefaultHandler ; Timer 2 subtimer B
+ DCD IntDefaultHandler ; Analog Comparator 0
+ DCD IntDefaultHandler ; Analog Comparator 1
+ DCD IntDefaultHandler ; Analog Comparator 2
+ DCD IntDefaultHandler ; System Control (PLL, OSC, BO)
+ DCD IntDefaultHandler ; FLASH Control
+ DCD IntDefaultHandler ; GPIO Port F
+ DCD IntDefaultHandler ; GPIO Port G
+ DCD IntDefaultHandler ; GPIO Port H
+ DCD IntDefaultHandler ; UART2 Rx and Tx
+ DCD IntDefaultHandler ; SSI1 Rx and Tx
+ DCD IntDefaultHandler ; Timer 3 subtimer A
+ DCD IntDefaultHandler ; Timer 3 subtimer B
+ DCD IntDefaultHandler ; I2C1 Master and Slave
+ DCD IntDefaultHandler ; Quadrature Encoder 1
+ DCD IntDefaultHandler ; CAN0
+ DCD IntDefaultHandler ; CAN1
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; Hibernate
+ DCD IntDefaultHandler ; USB0
+ DCD IntDefaultHandler ; PWM Generator 3
+ DCD IntDefaultHandler ; uDMA Software Transfer
+ DCD IntDefaultHandler ; uDMA Error
+ DCD IntDefaultHandler ; ADC1 Sequence 0
+ DCD IntDefaultHandler ; ADC1 Sequence 1
+ DCD IntDefaultHandler ; ADC1 Sequence 2
+ DCD IntDefaultHandler ; ADC1 Sequence 3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; GPIO Port J
+ DCD IntDefaultHandler ; GPIO Port K
+ DCD IntDefaultHandler ; GPIO Port L
+ DCD IntDefaultHandler ; SSI2 Rx and Tx
+ DCD IntDefaultHandler ; SSI3 Rx and Tx
+ DCD IntDefaultHandler ; UART3 Rx and Tx
+ DCD IntDefaultHandler ; UART4 Rx and Tx
+ DCD IntDefaultHandler ; UART5 Rx and Tx
+ DCD IntDefaultHandler ; UART6 Rx and Tx
+ DCD IntDefaultHandler ; UART7 Rx and Tx
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; I2C2 Master and Slave
+ DCD IntDefaultHandler ; I2C3 Master and Slave
+ DCD IntDefaultHandler ; Timer 4 subtimer A
+ DCD IntDefaultHandler ; Timer 4 subtimer B
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; Timer 5 subtimer A
+ DCD IntDefaultHandler ; Timer 5 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 0 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 0 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 1 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 1 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 2 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 2 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 3 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 3 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 4 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 4 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 5 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 5 subtimer B
+ DCD IntDefaultHandler ; FPU
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; I2C4 Master and Slave
+ DCD IntDefaultHandler ; I2C5 Master and Slave
+ DCD IntDefaultHandler ; GPIO Port M
+ DCD IntDefaultHandler ; GPIO Port N
+ DCD IntDefaultHandler ; Quadrature Encoder 2
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; GPIO Port P (Summary or P0)
+ DCD IntDefaultHandler ; GPIO Port P1
+ DCD IntDefaultHandler ; GPIO Port P2
+ DCD IntDefaultHandler ; GPIO Port P3
+ DCD IntDefaultHandler ; GPIO Port P4
+ DCD IntDefaultHandler ; GPIO Port P5
+ DCD IntDefaultHandler ; GPIO Port P6
+ DCD IntDefaultHandler ; GPIO Port P7
+ DCD IntDefaultHandler ; GPIO Port Q (Summary or Q0)
+ DCD IntDefaultHandler ; GPIO Port Q1
+ DCD IntDefaultHandler ; GPIO Port Q2
+ DCD IntDefaultHandler ; GPIO Port Q3
+ DCD IntDefaultHandler ; GPIO Port Q4
+ DCD IntDefaultHandler ; GPIO Port Q5
+ DCD IntDefaultHandler ; GPIO Port Q6
+ DCD IntDefaultHandler ; GPIO Port Q7
+ DCD IntDefaultHandler ; GPIO Port R
+ DCD IntDefaultHandler ; GPIO Port S
+ DCD IntDefaultHandler ; PWM 1 Generator 0
+ DCD IntDefaultHandler ; PWM 1 Generator 1
+ DCD IntDefaultHandler ; PWM 1 Generator 2
+ DCD IntDefaultHandler ; PWM 1 Generator 3
+ DCD IntDefaultHandler ; PWM 1 Fault
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor first starts execution
+; following a reset event.
+;
+;******************************************************************************
+ EXPORT Reset_Handler
+Reset_Handler
+ ;
+ ; Enable the floating-point unit. This must be done here to handle the
+ ; case where main() uses floating-point and the function prologue saves
+ ; floating-point registers (which will fault if floating-point is not
+ ; enabled). Any configuration of the floating-point unit using
+ ; DriverLib APIs must be done here prior to the floating-point unit
+ ; being enabled.
+ ;
+ ; Note that this does not use DriverLib since it might not be included
+ ; in this project.
+ ;
+ MOVW R0, #0xED88
+ MOVT R0, #0xE000
+ LDR R1, [R0]
+ ORR R1, #0x00F00000
+ STR R1, [R0]
+
+ ;
+ ; Call the C library enty point that handles startup. This will copy
+ ; the .data section initializers from flash to SRAM and zero fill the
+ ; .bss section.
+ ;
+ IMPORT __main
+ B __main
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives a NMI. This
+; simply enters an infinite loop, preserving the system state for examination
+; by a debugger.
+;
+;******************************************************************************
+NmiSR
+ B NmiSR
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives a fault
+; interrupt. This simply enters an infinite loop, preserving the system state
+; for examination by a debugger.
+;
+;******************************************************************************
+FaultISR
+ B FaultISR
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives an unexpected
+; interrupt. This simply enters an infinite loop, preserving the system state
+; for examination by a debugger.
+;
+;******************************************************************************
+IntDefaultHandler
+ B IntDefaultHandler
+
+;******************************************************************************
+;
+; Make sure the end of this section is aligned.
+;
+;******************************************************************************
+ ALIGN
+
+;******************************************************************************
+;
+; Some code in the normal code section for initializing the heap and stack.
+;
+;******************************************************************************
+ AREA |.text|, CODE, READONLY
+
+;******************************************************************************
+;
+; The function expected of the C library startup code for defining the stack
+; and heap memory locations. For the C library version of the startup code,
+; provide this function so that the C library initialization code can find out
+; the location of the stack and heap.
+;
+;******************************************************************************
+ IF :DEF: __MICROLIB
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+ ELSE
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+__user_initial_stackheap
+ LDR R0, =HeapMem
+ LDR R1, =(StackMem + Stack)
+ LDR R2, =(HeapMem + Heap)
+ LDR R3, =StackMem
+ BX LR
+ ENDIF
+
+;******************************************************************************
+;
+; Make sure the end of this section is aligned.
+;
+;******************************************************************************
+ ALIGN
+
+;******************************************************************************
+;
+; Tell the assembler that we're done.
+;
+;******************************************************************************
+ END
diff --git a/boards/ek-tm4c123gxl/uart_echo/uart_echo.c b/boards/ek-tm4c123gxl/uart_echo/uart_echo.c new file mode 100644 index 0000000..6a81b65 --- /dev/null +++ b/boards/ek-tm4c123gxl/uart_echo/uart_echo.c @@ -0,0 +1,206 @@ +//*****************************************************************************
+//
+// uart_echo.c - Example for reading data from and writing data to the UART in
+// an interrupt driven fashion.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "inc/hw_ints.h"
+#include "inc/hw_memmap.h"
+#include "driverlib/debug.h"
+#include "driverlib/fpu.h"
+#include "driverlib/gpio.h"
+#include "driverlib/interrupt.h"
+#include "driverlib/pin_map.h"
+#include "driverlib/rom.h"
+#include "driverlib/sysctl.h"
+#include "driverlib/uart.h"
+
+//*****************************************************************************
+//
+//! \addtogroup example_list
+//! <h1>UART Echo (uart_echo)</h1>
+//!
+//! This example application utilizes the UART to echo text. The first UART
+//! (connected to the USB debug virtual serial port on the evaluation board)
+//! will be configured in 115,200 baud, 8-n-1 mode. All characters received on
+//! the UART are transmitted back to the UART.
+//
+//*****************************************************************************
+
+//*****************************************************************************
+//
+// The error routine that is called if the driver library encounters an error.
+//
+//*****************************************************************************
+#ifdef DEBUG
+void
+__error__(char *pcFilename, uint32_t ui32Line)
+{
+}
+#endif
+
+//*****************************************************************************
+//
+// The UART interrupt handler.
+//
+//*****************************************************************************
+void
+UARTIntHandler(void)
+{
+ uint32_t ui32Status;
+
+ //
+ // Get the interrrupt status.
+ //
+ ui32Status = ROM_UARTIntStatus(UART0_BASE, true);
+
+ //
+ // Clear the asserted interrupts.
+ //
+ ROM_UARTIntClear(UART0_BASE, ui32Status);
+
+ //
+ // Loop while there are characters in the receive FIFO.
+ //
+ while(ROM_UARTCharsAvail(UART0_BASE))
+ {
+ //
+ // Read the next character from the UART and write it back to the UART.
+ //
+ ROM_UARTCharPutNonBlocking(UART0_BASE,
+ ROM_UARTCharGetNonBlocking(UART0_BASE));
+
+ //
+ // Blink the LED to show a character transfer is occuring.
+ //
+ GPIOPinWrite(GPIO_PORTF_BASE, GPIO_PIN_2, GPIO_PIN_2);
+
+ //
+ // Delay for 1 millisecond. Each SysCtlDelay is about 3 clocks.
+ //
+ SysCtlDelay(SysCtlClockGet() / (1000 * 3));
+
+ //
+ // Turn off the LED
+ //
+ GPIOPinWrite(GPIO_PORTF_BASE, GPIO_PIN_2, 0);
+
+ }
+}
+
+//*****************************************************************************
+//
+// Send a string to the UART.
+//
+//*****************************************************************************
+void
+UARTSend(const uint8_t *pui8Buffer, uint32_t ui32Count)
+{
+ //
+ // Loop while there are more characters to send.
+ //
+ while(ui32Count--)
+ {
+ //
+ // Write the next character to the UART.
+ //
+ ROM_UARTCharPutNonBlocking(UART0_BASE, *pui8Buffer++);
+ }
+}
+
+//*****************************************************************************
+//
+// This example demonstrates how to send a string of data to the UART.
+//
+//*****************************************************************************
+int
+main(void)
+{
+ //
+ // Enable lazy stacking for interrupt handlers. This allows floating-point
+ // instructions to be used within interrupt handlers, but at the expense of
+ // extra stack usage.
+ //
+ ROM_FPUEnable();
+ ROM_FPULazyStackingEnable();
+
+ //
+ // Set the clocking to run directly from the crystal.
+ //
+ ROM_SysCtlClockSet(SYSCTL_SYSDIV_1 | SYSCTL_USE_OSC | SYSCTL_OSC_MAIN |
+ SYSCTL_XTAL_16MHZ);
+
+ //
+ // Enable the GPIO port that is used for the on-board LED.
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOF);
+
+ //
+ // Enable the GPIO pins for the LED (PF2).
+ //
+ ROM_GPIOPinTypeGPIOOutput(GPIO_PORTF_BASE, GPIO_PIN_2);
+
+ //
+ // Enable the peripherals used by this example.
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_UART0);
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOA);
+
+ //
+ // Enable processor interrupts.
+ //
+ ROM_IntMasterEnable();
+
+ //
+ // Set GPIO A0 and A1 as UART pins.
+ //
+ GPIOPinConfigure(GPIO_PA0_U0RX);
+ GPIOPinConfigure(GPIO_PA1_U0TX);
+ ROM_GPIOPinTypeUART(GPIO_PORTA_BASE, GPIO_PIN_0 | GPIO_PIN_1);
+
+ //
+ // Configure the UART for 115,200, 8-N-1 operation.
+ //
+ ROM_UARTConfigSetExpClk(UART0_BASE, ROM_SysCtlClockGet(), 115200,
+ (UART_CONFIG_WLEN_8 | UART_CONFIG_STOP_ONE |
+ UART_CONFIG_PAR_NONE));
+
+ //
+ // Enable the UART interrupt.
+ //
+ ROM_IntEnable(INT_UART0);
+ ROM_UARTIntEnable(UART0_BASE, UART_INT_RX | UART_INT_RT);
+
+ //
+ // Prompt for text to be entered.
+ //
+ UARTSend((uint8_t *)"\033[2JEnter text: ", 16);
+
+ //
+ // Loop forever echoing data through the UART.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/uart_echo/uart_echo.ewd b/boards/ek-tm4c123gxl/uart_echo/uart_echo.ewd new file mode 100644 index 0000000..7a32408 --- /dev/null +++ b/boards/ek-tm4c123gxl/uart_echo/uart_echo.ewd @@ -0,0 +1,614 @@ +<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+ <fileVersion>1</fileVersion>
+ <configuration>
+ <name>Debug</name>
+ <toolchain>
+ <name>ARM</name>
+ </toolchain>
+ <debug>1</debug>
+ <settings>
+ <name>C-SPY</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>15</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CInput</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CEndian</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCVariant</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>MemOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MemFile</name>
+ <state>$TOOLKIT_DIR$\CONFIG\debugger\TexasInstruments\tm4c123gh6pm</state>
+ </option>
+ <option>
+ <name>RunToEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>RunToName</name>
+ <state>main</state>
+ </option>
+ <option>
+ <name>CExtraOptionsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCDDFArgumentProducer</name>
+ <state></state>
+ </option>
+ <option>
+ <name>OCDownloadSuppressDownload</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDownloadVerifyAll</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OCDynDriverList</name>
+ <state>LMIFTDI_ID</state>
+ </option>
+ <option>
+ <name>OCLastSavedByProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OCDownloadAttachToProgram</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FlashLoaders</name>
+ <state>,,,,(default),</state>
+ </option>
+ <option>
+ <name>UseFlashLoader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CLowLevel</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCBE8Slave</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ARMSIM_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCSimDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCSimEnablePSP</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCSimPspOverrideConfig</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCSimPspConfigFile</name>
+ <state></state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ANGEL_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CCAngelHeartbeat</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CAngelCommunication</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CAngelCommBaud</name>
+ <version>0</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>CAngelCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ANGELTCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoAngelLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AngelLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>GDBSERVER_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>TCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>LogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCJTagBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>IARROM_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CRomLogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomLogFileEditB</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CRomCommunication</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomCommBaud</name>
+ <version>0</version>
+ <state>7</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>JLINK_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>9</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>JLinkSpeed</name>
+ <state>32</state>
+ </option>
+ <option>
+ <name>CCJLinkDoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCJLinkHWResetDelay</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>JLinkInitialSpeed</name>
+ <state>32</state>
+ </option>
+ <option>
+ <name>CCDoJlinkMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCScanChainNonARMDevices</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkIRLength</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkCommRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkTCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>CCJLinkSpeedRadioV2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCUSBDevice</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchUndef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchSWI</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchData</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchPrefetch</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchIRQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchFIQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ <option>
+ <name>CCJLinkInterfaceRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCJLinkAttachSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCJLinkResetList</name>
+ <version>0</version>
+ <state>5</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>LMIFTDI_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>LmiftdiSpeed</name>
+ <state>500</state>
+ </option>
+ <option>
+ <name>CCLmiftdiDoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCLmiftdiLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>MACRAIGOR_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>2</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>jtag</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>EmuSpeed</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>TCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>LogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>DoEmuMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>EmuMultiTarget</name>
+ <state>0@ARM7TDMI</state>
+ </option>
+ <option>
+ <name>EmuHWReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CEmuCommBaud</name>
+ <version>0</version>
+ <state>4</state>
+ </option>
+ <option>
+ <name>CEmuCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>jtago</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>UnusedAddr</name>
+ <state>0x00800000</state>
+ </option>
+ <option>
+ <name>CCMacraigorHWResetDelay</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCJTagBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>RDI_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CRDIDriverDll</name>
+ <state>Browse to your RDI driver</state>
+ </option>
+ <option>
+ <name>CRDILogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRDILogFileEdit</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCRDIHWReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchUndef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchSWI</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchData</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchPrefetch</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchIRQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchFIQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDIUseETM</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>THIRDPARTY_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CThirdPartyDriverDll</name>
+ <state>Browse to your third-party driver</state>
+ </option>
+ <option>
+ <name>CThirdPartyLogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CThirdPartyLogFileEditB</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <debuggerPlugins>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\OSE\OseEpsilonPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Profiling\Profiling.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ </debuggerPlugins>
+ </configuration>
+</project>
diff --git a/boards/ek-tm4c123gxl/uart_echo/uart_echo.ewp b/boards/ek-tm4c123gxl/uart_echo/uart_echo.ewp new file mode 100644 index 0000000..7000f6d --- /dev/null +++ b/boards/ek-tm4c123gxl/uart_echo/uart_echo.ewp @@ -0,0 +1,784 @@ +<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+ <fileVersion>1</fileVersion>
+ <configuration>
+ <name>Debug</name>
+ <toolchain>
+ <name>ARM</name>
+ </toolchain>
+ <debug>1</debug>
+ <settings>
+ <name>General</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <version>14</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>ExePath</name>
+ <state>ewarm\Exe</state>
+ </option>
+ <option>
+ <name>ObjPath</name>
+ <state>ewarm\Obj</state>
+ </option>
+ <option>
+ <name>ListPath</name>
+ <state>ewarm\List</state>
+ </option>
+ <option>
+ <name>Variant</name>
+ <version>19</version>
+ <state>39</state>
+ </option>
+ <option>
+ <name>GEndianMode</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>Input variant</name>
+ <version>1</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>Input description</name>
+ <state>No specifier n, no float nor long long, no scan set, no assignment suppressing.</state>
+ </option>
+ <option>
+ <name>Output variant</name>
+ <version>0</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>Output description</name>
+ <state>No specifier a, A, no specifier n, no float nor long long, no flags.</state>
+ </option>
+ <option>
+ <name>GOutputBinary</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FPU</name>
+ <version>2</version>
+ <state>5</state>
+ </option>
+ <option>
+ <name>OGCoreOrChip</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelect</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelectSlave</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>RTDescription</name>
+ <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+ </option>
+ <option>
+ <name>RTConfigPath</name>
+ <state>$TOOLKIT_DIR$\INC\DLib_Config_Normal.h</state>
+ </option>
+ <option>
+ <name>OGProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OGLastSavedByProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>GeneralMisraRules</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>GeneralEnableMisra</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GeneralMisraVerbose</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGChipSelectEditMenu</name>
+ <state>TM4C123GH6PM TexasInstruments TM4C123GH6PM</state>
+ </option>
+ <option>
+ <name>GenLowLevelInterface</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GEndianModeBE</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OGBufferedTerminalOutput</name>
+ <state>0</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ICCARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>19</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CCDefines</name>
+ <state>ewarm</state>
+ <state>PART_TM4C123GH6PM</state>
+ <state>TARGET_IS_TM4C123_RB1</state>
+ </option>
+ <option>
+ <name>CCPreprocFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocComments</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMnemonics</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMessages</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssSource</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagSuppress</name>
+ <state>Pa050</state>
+ </option>
+ <option>
+ <name>CCDiagRemark</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCDiagWarning</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCDiagError</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCAllowList</name>
+ <version>1</version>
+ <state>1111111</state>
+ </option>
+ <option>
+ <name>CCDebugInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IEndianMode</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IExtraOptionsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCLangConformance</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCSignedPlainChar</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCRequirePrototypes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagWarnAreErr</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCCompilerRuntimeInfo</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OutputFile</name>
+ <state>$FILE_BNAME$.o</state>
+ </option>
+ <option>
+ <name>CCLangSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCLibConfigHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>PreInclude</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CompilerMisraRules</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>CompilerMisraOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCIncludePath2</name>
+ <state>$PROJ_DIR$\..\..\..\..</state>
+ </option>
+ <option>
+ <name>CCStdIncCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCStdIncludePath</name>
+ <state>$TOOLKIT_DIR$\INC\</state>
+ </option>
+ <option>
+ <name>CCCodeSection</name>
+ <state>.text</state>
+ </option>
+ <option>
+ <name>IInterwork2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IProcessorMode2</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptLevel</name>
+ <state>3</state>
+ </option>
+ <option>
+ <name>CCOptStrategy</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptLevelSlave</name>
+ <state>3</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>AARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>7</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>AObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AEndian</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>ACaseSensitivity</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacroChars</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnEnable</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnWhat</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnOne</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AWarnRange1</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AWarnRange2</name>
+ <state></state>
+ </option>
+ <option>
+ <name>ADebug</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AltRegisterNames</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ADefines</name>
+ <state>ewarm</state>
+ </option>
+ <option>
+ <name>AList</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AListHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AListing</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>Includes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacDefs</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacExps</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacExec</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OnlyAssed</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MultiLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLengthCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLength</name>
+ <state>80</state>
+ </option>
+ <option>
+ <name>TabSpacing</name>
+ <state>8</state>
+ </option>
+ <option>
+ <name>AXRef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDefines</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefInternal</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDual</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AOutputFile</name>
+ <state>$FILE_BNAME$.o</state>
+ </option>
+ <option>
+ <name>AMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ALimitErrorsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ALimitErrorsEdit</name>
+ <state>100</state>
+ </option>
+ <option>
+ <name>AIgnoreStdInclude</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AStdIncludes</name>
+ <state>$TOOLKIT_DIR$\INC\</state>
+ </option>
+ <option>
+ <name>AUserIncludes</name>
+ <state>$PROJ_DIR$\..\..\..\..</state>
+ </option>
+ <option>
+ <name>AExtraOptionsCheckV2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AExtraOptionsV2</name>
+ <state></state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>OBJCOPY</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OOCOutputFormat</name>
+ <version>1</version>
+ <state>2</state>
+ </option>
+ <option>
+ <name>OCOutputOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OOCOutputFile</name>
+ <state>uart_echo.bin</state>
+ </option>
+ <option>
+ <name>OOCCommandLineProducer</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OOCObjCopyEnable</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>CUSTOM</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <extensions></extensions>
+ <cmdline></cmdline>
+ </data>
+ </settings>
+ <settings>
+ <name>BICOMP</name>
+ <archiveVersion>0</archiveVersion>
+ <data/>
+ </settings>
+ <settings>
+ <name>BUILDACTION</name>
+ <archiveVersion>1</archiveVersion>
+ <data>
+ <prebuild></prebuild>
+ <postbuild></postbuild>
+ </data>
+ </settings>
+ <settings>
+ <name>ILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>5</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>IlinkLibIOConfig</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>XLinkMisraHandler</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkInputFileSlave</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkOutputFile</name>
+ <state>uart_echo.out</state>
+ </option>
+ <option>
+ <name>IlinkDebugInfoEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkKeepSymbols</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinaryFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinarySymbol</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinarySegment</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinaryAlign</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkDefines</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkConfigDefines</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkMapFile</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkLogFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogInitialization</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogModule</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogSection</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogVeneer</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkIcfOverride</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkIcfFile</name>
+ <state>$PROJ_DIR$\uart_echo.icf</state>
+ </option>
+ <option>
+ <name>IlinkIcfFileSlave</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkSuppressDiags</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsRem</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsWarn</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsErr</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkWarningsAreErrors</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkUseExtraOptions</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkLowLevelInterfaceSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAutoLibEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAdditionalLibs</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkOverrideProgramEntryLabel</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabelSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabel</name>
+ <state>__iar_program_start</state>
+ </option>
+ <option>
+ <name>IlinkNXPLPCChecksum</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>DoFill</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FillerByte</name>
+ <state>0xFF</state>
+ </option>
+ <option>
+ <name>FillerStart</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>FillerEnd</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>CrcSize</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcAlign</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcAlgo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcPoly</name>
+ <state>0x11021</state>
+ </option>
+ <option>
+ <name>CrcCompl</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcBitOrder</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcInitialValue</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>DoCrc</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkBE8Slave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkBufferedTerminalOutput</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>IARCHIVE</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>IarchiveInputs</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IarchiveOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IarchiveOutput</name>
+ <state>###Unitialized###</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>BILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data/>
+ </settings>
+ </configuration>
+ <group>
+ <name>Libraries</name>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\driverlib\ewarm\Exe\driverlib.a</name>
+ </file>
+ </group>
+ <group>
+ <name>Source</name>
+ <file>
+ <name>$PROJ_DIR$\startup_ewarm.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\uart_echo.c</name>
+ </file>
+ </group>
+</project>
diff --git a/boards/ek-tm4c123gxl/uart_echo/uart_echo.icf b/boards/ek-tm4c123gxl/uart_echo/uart_echo.icf new file mode 100644 index 0000000..7316c6b --- /dev/null +++ b/boards/ek-tm4c123gxl/uart_echo/uart_echo.icf @@ -0,0 +1,78 @@ +//*****************************************************************************
+//
+// uart_echo.icf - Linker configuration file for uart_echo.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+//
+// Define a memory region that covers the entire 4 GB addressible space of the
+// processor.
+//
+define memory mem with size = 4G;
+
+//
+// Define a region for the on-chip flash.
+//
+define region FLASH = mem:[from 0x00000000 to 0x0003ffff];
+
+//
+// Define a region for the on-chip SRAM.
+//
+define region SRAM = mem:[from 0x20000000 to 0x20007fff];
+
+//
+// Define a block for the heap. The size should be set to something other
+// than zero if things in the C library that require the heap are used.
+//
+define block HEAP with alignment = 8, size = 0x00000000 { };
+
+//
+// Indicate that the read/write values should be initialized by copying from
+// flash.
+//
+initialize by copy { readwrite };
+
+//
+// Indicate that the noinit values should be left alone. This includes the
+// stack, which if initialized will destroy the return address from the
+// initialization code, causing the processor to branch to zero and fault.
+//
+do not initialize { section .noinit };
+
+//
+// Place the interrupt vectors at the start of flash.
+//
+place at start of FLASH { readonly section .intvec };
+
+//
+// Place the remainder of the read-only items into flash.
+//
+place in FLASH { readonly };
+
+//
+// Place the RAM vector table at the start of SRAM.
+//
+place at start of SRAM { section VTABLE };
+
+//
+// Place all read/write items into SRAM.
+//
+place in SRAM { readwrite, block HEAP };
diff --git a/boards/ek-tm4c123gxl/uart_echo/uart_echo.ld b/boards/ek-tm4c123gxl/uart_echo/uart_echo.ld new file mode 100644 index 0000000..10bd8f0 --- /dev/null +++ b/boards/ek-tm4c123gxl/uart_echo/uart_echo.ld @@ -0,0 +1,57 @@ +/******************************************************************************
+ *
+ * uart_echo.ld - Linker configuration file for uart_echo.
+ *
+ * Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+ * Software License Agreement
+ *
+ * Texas Instruments (TI) is supplying this software for use solely and
+ * exclusively on TI's microcontroller products. The software is owned by
+ * TI and/or its suppliers, and is protected under applicable copyright
+ * laws. You may not combine this software with "viral" open-source
+ * software in order to form a larger program.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+ * NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+ * NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+ * CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+ * DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ * This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+ *
+ *****************************************************************************/
+
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x00040000
+ SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000
+}
+
+SECTIONS
+{
+ .text :
+ {
+ _text = .;
+ KEEP(*(.isr_vector))
+ *(.text*)
+ *(.rodata*)
+ _etext = .;
+ } > FLASH
+
+ .data : AT(ADDR(.text) + SIZEOF(.text))
+ {
+ _data = .;
+ *(vtable)
+ *(.data*)
+ _edata = .;
+ } > SRAM
+
+ .bss :
+ {
+ _bss = .;
+ *(.bss*)
+ *(COMMON)
+ _ebss = .;
+ } > SRAM
+}
diff --git a/boards/ek-tm4c123gxl/uart_echo/uart_echo.sct b/boards/ek-tm4c123gxl/uart_echo/uart_echo.sct new file mode 100644 index 0000000..278fa25 --- /dev/null +++ b/boards/ek-tm4c123gxl/uart_echo/uart_echo.sct @@ -0,0 +1,47 @@ +;******************************************************************************
+;
+; uart_echo.sct - Linker configuration file for uart_echo.
+;
+; Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+; Software License Agreement
+;
+; Texas Instruments (TI) is supplying this software for use solely and
+; exclusively on TI's microcontroller products. The software is owned by
+; TI and/or its suppliers, and is protected under applicable copyright
+; laws. You may not combine this software with "viral" open-source
+; software in order to form a larger program.
+;
+; THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+; NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+; NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+; A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+; CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+; DAMAGES, FOR ANY REASON WHATSOEVER.
+;
+; This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+;
+;******************************************************************************
+
+LR_IROM 0x00000000 0x00040000
+{
+ ;
+ ; Specify the Execution Address of the code and the size.
+ ;
+ ER_IROM 0x00000000 0x00040000
+ {
+ *.o (RESET, +First)
+ * (InRoot$$Sections, +RO)
+ }
+
+ ;
+ ; Specify the Execution Address of the data area.
+ ;
+ RW_IRAM 0x20000000 0x00008000
+ {
+ ;
+ ; Uncomment the following line in order to use IntRegister().
+ ;
+ ;* (vtable, +First)
+ * (+RW, +ZI)
+ }
+}
diff --git a/boards/ek-tm4c123gxl/uart_echo/uart_echo.uvopt b/boards/ek-tm4c123gxl/uart_echo/uart_echo.uvopt new file mode 100644 index 0000000..4d6e088 --- /dev/null +++ b/boards/ek-tm4c123gxl/uart_echo/uart_echo.uvopt @@ -0,0 +1,289 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+ <SchemaVersion>1.0</SchemaVersion>
+
+ <Header>### uVision Project, (C) Keil Software</Header>
+
+ <Extensions>
+ <cExt>*.c</cExt>
+ <aExt>*.s*; *.src; *.a*</aExt>
+ <oExt>*.obj</oExt>
+ <lExt>*.lib</lExt>
+ <tExt>*.txt; *.h; *.inc</tExt>
+ <pExt>*.plm</pExt>
+ <CppX>*.cpp</CppX>
+ </Extensions>
+
+ <DaveTm>
+ <dwLowDateTime>0</dwLowDateTime>
+ <dwHighDateTime>0</dwHighDateTime>
+ </DaveTm>
+
+ <Target>
+ <TargetName>uart_echo</TargetName>
+ <ToolsetNumber>0x4</ToolsetNumber>
+ <ToolsetName>ARM-ADS</ToolsetName>
+ <TargetOption>
+ <CLKADS>8000000</CLKADS>
+ <OPTTT>
+ <gFlags>1</gFlags>
+ <BeepAtEnd>1</BeepAtEnd>
+ <RunSim>1</RunSim>
+ <RunTarget>0</RunTarget>
+ </OPTTT>
+ <OPTHX>
+ <HexSelection>1</HexSelection>
+ <FlashByte>65535</FlashByte>
+ <HexRangeLowAddress>0</HexRangeLowAddress>
+ <HexRangeHighAddress>0</HexRangeHighAddress>
+ <HexOffset>0</HexOffset>
+ </OPTHX>
+ <OPTLEX>
+ <PageWidth>79</PageWidth>
+ <PageLength>66</PageLength>
+ <TabStop>8</TabStop>
+ <ListingPath>.\rvmdk\</ListingPath>
+ </OPTLEX>
+ <ListingPage>
+ <CreateCListing>1</CreateCListing>
+ <CreateAListing>1</CreateAListing>
+ <CreateLListing>1</CreateLListing>
+ <CreateIListing>0</CreateIListing>
+ <AsmCond>1</AsmCond>
+ <AsmSymb>1</AsmSymb>
+ <AsmXref>0</AsmXref>
+ <CCond>1</CCond>
+ <CCode>0</CCode>
+ <CListInc>0</CListInc>
+ <CSymb>0</CSymb>
+ <LinkerCodeListing>0</LinkerCodeListing>
+ </ListingPage>
+ <OPTXL>
+ <LMap>1</LMap>
+ <LComments>1</LComments>
+ <LGenerateSymbols>1</LGenerateSymbols>
+ <LLibSym>1</LLibSym>
+ <LLines>1</LLines>
+ <LLocSym>1</LLocSym>
+ <LPubSym>1</LPubSym>
+ <LXref>0</LXref>
+ <LExpSel>0</LExpSel>
+ </OPTXL>
+ <OPTFL>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <IsCurrentTarget>1</IsCurrentTarget>
+ </OPTFL>
+ <CpuCode>255</CpuCode>
+ <Books>
+ <Book>
+ <Number>0</Number>
+ <Title>Data Sheet</Title>
+ <Path>DATASHTS\Luminary\TM4C123GH6PM.PDF</Path>
+ </Book>
+ </Books>
+ <DllOpt>
+ <SimDllName>SARMCM3.DLL</SimDllName>
+ <SimDllArguments>-MPU</SimDllArguments>
+ <SimDlgDllName>DCM.DLL</SimDlgDllName>
+ <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+ <TargetDllName>SARMCM3.DLL</TargetDllName>
+ <TargetDllArguments>-MPU</TargetDllArguments>
+ <TargetDlgDllName>TCM.DLL</TargetDlgDllName>
+ <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+ </DllOpt>
+ <DebugOpt>
+ <uSim>0</uSim>
+ <uTrg>1</uTrg>
+ <sLdApp>1</sLdApp>
+ <sGomain>1</sGomain>
+ <sRbreak>1</sRbreak>
+ <sRwatch>1</sRwatch>
+ <sRmem>1</sRmem>
+ <sRfunc>1</sRfunc>
+ <sRbox>1</sRbox>
+ <tLdApp>1</tLdApp>
+ <tGomain>0</tGomain>
+ <tRbreak>1</tRbreak>
+ <tRwatch>1</tRwatch>
+ <tRmem>1</tRmem>
+ <tRfunc>0</tRfunc>
+ <tRbox>1</tRbox>
+ <sRunDeb>0</sRunDeb>
+ <sLrtime>0</sLrtime>
+ <nTsel>4</nTsel>
+ <sDll></sDll>
+ <sDllPa></sDllPa>
+ <sDlgDll></sDlgDll>
+ <sDlgPa></sDlgPa>
+ <sIfile></sIfile>
+ <tDll></tDll>
+ <tDllPa></tDllPa>
+ <tDlgDll></tDlgDll>
+ <tDlgPa></tDlgPa>
+ <tIfile></tIfile>
+ <pMon>BIN\lmidk-agdi.dll</pMon>
+ </DebugOpt>
+ <TargetDriverDllRegistry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>lmidk-agdi</Key>
+ <Name>-O4614 -S3 -FO29</Name>
+ </SetRegEntry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>DLGTARM</Key>
+ <Name></Name>
+ </SetRegEntry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>ARMDBGFLAGS</Key>
+ <Name></Name>
+ </SetRegEntry>
+ </TargetDriverDllRegistry>
+ <DebugFlag>
+ <trace>0</trace>
+ <periodic>1</periodic>
+ <aLwin>0</aLwin>
+ <aCover>0</aCover>
+ <aSer1>0</aSer1>
+ <aSer2>0</aSer2>
+ <aPa>0</aPa>
+ <viewmode>1</viewmode>
+ <vrSel>0</vrSel>
+ <aSym>0</aSym>
+ <aTbox>0</aTbox>
+ <AscS1>0</AscS1>
+ <AscS2>0</AscS2>
+ <AscS3>0</AscS3>
+ <aSer3>0</aSer3>
+ <eProf>0</eProf>
+ <aLa>0</aLa>
+ <aPa1>0</aPa1>
+ <AscS4>0</AscS4>
+ <aSer4>0</aSer4>
+ <StkLoc>0</StkLoc>
+ <TrcWin>0</TrcWin>
+ <newCpu>0</newCpu>
+ <uProt>0</uProt>
+ </DebugFlag>
+ <LintExecutable></LintExecutable>
+ <LintConfigFile></LintConfigFile>
+ </TargetOption>
+ </Target>
+
+ <Group>
+ <GroupName>Source</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>1</FileNumber>
+ <FileType>2</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\startup_rvmdk.S</PathWithFileName>
+ <FilenameWithoutPath>startup_rvmdk.S</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>2</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\uart_echo.c</PathWithFileName>
+ <FilenameWithoutPath>uart_echo.c</FilenameWithoutPath>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>Libraries</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>3</FileNumber>
+ <FileType>4</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\driverlib\rvmdk\driverlib.lib</PathWithFileName>
+ <FilenameWithoutPath>driverlib.lib</FilenameWithoutPath>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>Documentation</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>3</GroupNumber>
+ <FileNumber>4</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <Focus>1</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>1</TopLine>
+ <CurrentLine>1</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\readme.txt</PathWithFileName>
+ <FilenameWithoutPath>readme.txt</FilenameWithoutPath>
+ <WindowPosition>
+ <length>44</length>
+ <flags>0</flags>
+ <showCmd>1</showCmd>
+ <MinPosition>
+ <xPos>-1</xPos>
+ <yPos>-1</yPos>
+ </MinPosition>
+ <MaxPosition>
+ <xPos>-1</xPos>
+ <yPos>-1</yPos>
+ </MaxPosition>
+ <NormalPosition>
+ <Top>0</Top>
+ <Left>0</Left>
+ <Right>729</Right>
+ <Bottom>300</Bottom>
+ </NormalPosition>
+ </WindowPosition>
+ </File>
+ </Group>
+
+ <MDIGroups>
+ <Orientation>1</Orientation>
+ <ActiveMDIGroup>0</ActiveMDIGroup>
+ <MDIGroup>
+ <Size>100</Size>
+ <ActiveTab>0</ActiveTab>
+ <Documents>
+ <Doc>
+ <Name>.\readme.txt</Name>
+ <ColumnNumber>0</ColumnNumber>
+ <TopLine>1</TopLine>
+ <CurrentLine>1</CurrentLine>
+ </Doc>
+ </Documents>
+ </MDIGroup>
+ </MDIGroups>
+
+</ProjectOpt>
diff --git a/boards/ek-tm4c123gxl/uart_echo/uart_echo.uvproj b/boards/ek-tm4c123gxl/uart_echo/uart_echo.uvproj new file mode 100644 index 0000000..b78e09f --- /dev/null +++ b/boards/ek-tm4c123gxl/uart_echo/uart_echo.uvproj @@ -0,0 +1,424 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+ <SchemaVersion>1.1</SchemaVersion>
+
+ <Header>### uVision Project, (C) Keil Software</Header>
+
+ <Targets>
+ <Target>
+ <TargetName>uart_echo</TargetName>
+ <ToolsetNumber>0x4</ToolsetNumber>
+ <ToolsetName>ARM-ADS</ToolsetName>
+ <TargetOption>
+ <TargetCommonOption>
+ <Device>TM4C123GH6PM</Device>
+ <Vendor>Texas Instruments</Vendor>
+ <Cpu>IRAM(0x20000000-0x20007FFF) IROM(0-0x3FFFF) CLOCK(8000000) CPUTYPE("Cortex-M4") FPU2</Cpu>
+ <FlashUtilSpec></FlashUtilSpec>
+ <StartupFile>"STARTUP\Luminary\Startup.s" ("Luminary Startup Code")</StartupFile>
+ <FlashDriverDll>UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0LM4F_256 -FS00 -FL040000)</FlashDriverDll>
+ <DeviceId>5919</DeviceId>
+ <RegisterFile>LM4Fxxxx.H</RegisterFile>
+ <MemoryEnv></MemoryEnv>
+ <Cmp></Cmp>
+ <Asm></Asm>
+ <Linker></Linker>
+ <OHString></OHString>
+ <InfinionOptionDll></InfinionOptionDll>
+ <SLE66CMisc></SLE66CMisc>
+ <SLE66AMisc></SLE66AMisc>
+ <SLE66LinkerMisc></SLE66LinkerMisc>
+ <UseEnv>0</UseEnv>
+ <BinPath></BinPath>
+ <IncludePath></IncludePath>
+ <LibPath></LibPath>
+ <RegisterFilePath>Luminary\</RegisterFilePath>
+ <DBRegisterFilePath>Luminary\</DBRegisterFilePath>
+ <TargetStatus>
+ <Error>0</Error>
+ <ExitCodeStop>0</ExitCodeStop>
+ <ButtonStop>0</ButtonStop>
+ <NotGenerated>0</NotGenerated>
+ <InvalidFlash>1</InvalidFlash>
+ </TargetStatus>
+ <OutputDirectory>.\rvmdk\</OutputDirectory>
+ <OutputName>uart_echo</OutputName>
+ <CreateExecutable>1</CreateExecutable>
+ <CreateLib>0</CreateLib>
+ <CreateHexFile>0</CreateHexFile>
+ <DebugInformation>1</DebugInformation>
+ <BrowseInformation>1</BrowseInformation>
+ <ListingPath>.\rvmdk\</ListingPath>
+ <HexFormatSelection>1</HexFormatSelection>
+ <Merge32K>0</Merge32K>
+ <CreateBatchFile>0</CreateBatchFile>
+ <BeforeCompile>
+ <RunUserProg1>0</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name></UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </BeforeCompile>
+ <BeforeMake>
+ <RunUserProg1>0</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name></UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </BeforeMake>
+ <AfterMake>
+ <RunUserProg1>1</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name>fromelf --bin --output .\rvmdk\uart_echo.bin .\rvmdk\uart_echo.axf</UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </AfterMake>
+ <SelectedForBatchBuild>0</SelectedForBatchBuild>
+ <SVCSIdString></SVCSIdString>
+ </TargetCommonOption>
+ <CommonProperty>
+ <UseCPPCompiler>0</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <DllOption>
+ <SimDllName>SARMCM3.DLL</SimDllName>
+ <SimDllArguments>-MPU</SimDllArguments>
+ <SimDlgDll>DCM.DLL</SimDlgDll>
+ <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+ <TargetDllName>SARMCM3.DLL</TargetDllName>
+ <TargetDllArguments>-MPU</TargetDllArguments>
+ <TargetDlgDll>TCM.DLL</TargetDlgDll>
+ <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+ </DllOption>
+ <DebugOption>
+ <OPTHX>
+ <HexSelection>1</HexSelection>
+ <HexRangeLowAddress>0</HexRangeLowAddress>
+ <HexRangeHighAddress>0</HexRangeHighAddress>
+ <HexOffset>0</HexOffset>
+ <Oh166RecLen>16</Oh166RecLen>
+ </OPTHX>
+ <Simulator>
+ <UseSimulator>0</UseSimulator>
+ <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+ <RunToMain>1</RunToMain>
+ <RestoreBreakpoints>1</RestoreBreakpoints>
+ <RestoreWatchpoints>1</RestoreWatchpoints>
+ <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+ <RestoreFunctions>1</RestoreFunctions>
+ <RestoreToolbox>1</RestoreToolbox>
+ <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+ </Simulator>
+ <Target>
+ <UseTarget>1</UseTarget>
+ <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+ <RunToMain>0</RunToMain>
+ <RestoreBreakpoints>1</RestoreBreakpoints>
+ <RestoreWatchpoints>1</RestoreWatchpoints>
+ <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+ <RestoreFunctions>0</RestoreFunctions>
+ <RestoreToolbox>1</RestoreToolbox>
+ </Target>
+ <RunDebugAfterBuild>0</RunDebugAfterBuild>
+ <TargetSelection>4</TargetSelection>
+ <SimDlls>
+ <CpuDll></CpuDll>
+ <CpuDllArguments></CpuDllArguments>
+ <PeripheralDll></PeripheralDll>
+ <PeripheralDllArguments></PeripheralDllArguments>
+ <InitializationFile></InitializationFile>
+ </SimDlls>
+ <TargetDlls>
+ <CpuDll></CpuDll>
+ <CpuDllArguments></CpuDllArguments>
+ <PeripheralDll></PeripheralDll>
+ <PeripheralDllArguments></PeripheralDllArguments>
+ <InitializationFile></InitializationFile>
+ <Driver>BIN\lmidk-agdi.dll</Driver>
+ </TargetDlls>
+ </DebugOption>
+ <Utilities>
+ <Flash1>
+ <UseTargetDll>1</UseTargetDll>
+ <UseExternalTool>0</UseExternalTool>
+ <RunIndependent>0</RunIndependent>
+ <UpdateFlashBeforeDebugging>0</UpdateFlashBeforeDebugging>
+ <Capability>1</Capability>
+ <DriverSelection>4099</DriverSelection>
+ </Flash1>
+ <Flash2>BIN\lmidk-agdi.dll</Flash2>
+ <Flash3></Flash3>
+ <Flash4></Flash4>
+ </Utilities>
+ <TargetArmAds>
+ <ArmAdsMisc>
+ <GenerateListings>0</GenerateListings>
+ <asHll>1</asHll>
+ <asAsm>1</asAsm>
+ <asMacX>1</asMacX>
+ <asSyms>1</asSyms>
+ <asFals>1</asFals>
+ <asDbgD>1</asDbgD>
+ <asForm>1</asForm>
+ <ldLst>0</ldLst>
+ <ldmm>1</ldmm>
+ <ldXref>1</ldXref>
+ <BigEnd>0</BigEnd>
+ <AdsALst>0</AdsALst>
+ <AdsACrf>0</AdsACrf>
+ <AdsANop>0</AdsANop>
+ <AdsANot>0</AdsANot>
+ <AdsLLst>1</AdsLLst>
+ <AdsLmap>1</AdsLmap>
+ <AdsLcgr>1</AdsLcgr>
+ <AdsLsym>1</AdsLsym>
+ <AdsLszi>1</AdsLszi>
+ <AdsLtoi>1</AdsLtoi>
+ <AdsLsun>1</AdsLsun>
+ <AdsLven>1</AdsLven>
+ <AdsLsxf>1</AdsLsxf>
+ <RvctClst>0</RvctClst>
+ <GenPPlst>0</GenPPlst>
+ <AdsCpuType>"Cortex-M4"</AdsCpuType>
+ <RvctDeviceName></RvctDeviceName>
+ <mOS>0</mOS>
+ <uocRom>0</uocRom>
+ <uocRam>0</uocRam>
+ <hadIROM>1</hadIROM>
+ <hadIRAM>1</hadIRAM>
+ <hadXRAM>0</hadXRAM>
+ <uocXRam>0</uocXRam>
+ <RvdsVP>2</RvdsVP>
+ <hadIRAM2>0</hadIRAM2>
+ <hadIROM2>0</hadIROM2>
+ <StupSel>8</StupSel>
+ <useUlib>1</useUlib>
+ <EndSel>0</EndSel>
+ <uLtcg>0</uLtcg>
+ <RoSelD>3</RoSelD>
+ <RwSelD>3</RwSelD>
+ <CodeSel>0</CodeSel>
+ <OptFeed>0</OptFeed>
+ <NoZi1>0</NoZi1>
+ <NoZi2>0</NoZi2>
+ <NoZi3>0</NoZi3>
+ <NoZi4>0</NoZi4>
+ <NoZi5>0</NoZi5>
+ <Ro1Chk>0</Ro1Chk>
+ <Ro2Chk>0</Ro2Chk>
+ <Ro3Chk>0</Ro3Chk>
+ <Ir1Chk>1</Ir1Chk>
+ <Ir2Chk>0</Ir2Chk>
+ <Ra1Chk>0</Ra1Chk>
+ <Ra2Chk>0</Ra2Chk>
+ <Ra3Chk>0</Ra3Chk>
+ <Im1Chk>1</Im1Chk>
+ <Im2Chk>0</Im2Chk>
+ <OnChipMemories>
+ <Ocm1>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm1>
+ <Ocm2>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm2>
+ <Ocm3>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm3>
+ <Ocm4>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm4>
+ <Ocm5>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm5>
+ <Ocm6>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm6>
+ <IRAM>
+ <Type>0</Type>
+ <StartAddress>0x20000000</StartAddress>
+ <Size>0x8000</Size>
+ </IRAM>
+ <IROM>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x40000</Size>
+ </IROM>
+ <XRAM>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </XRAM>
+ <OCR_RVCT1>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT1>
+ <OCR_RVCT2>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT2>
+ <OCR_RVCT3>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT3>
+ <OCR_RVCT4>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x40000</Size>
+ </OCR_RVCT4>
+ <OCR_RVCT5>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT5>
+ <OCR_RVCT6>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT6>
+ <OCR_RVCT7>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT7>
+ <OCR_RVCT8>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT8>
+ <OCR_RVCT9>
+ <Type>0</Type>
+ <StartAddress>0x20000000</StartAddress>
+ <Size>0x8000</Size>
+ </OCR_RVCT9>
+ <OCR_RVCT10>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT10>
+ </OnChipMemories>
+ <RvctStartVector></RvctStartVector>
+ </ArmAdsMisc>
+ <Cads>
+ <interw>0</interw>
+ <Optim>3</Optim>
+ <oTime>0</oTime>
+ <SplitLS>0</SplitLS>
+ <OneElfS>1</OneElfS>
+ <Strict>0</Strict>
+ <EnumInt>0</EnumInt>
+ <PlainCh>0</PlainCh>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <wLevel>2</wLevel>
+ <uThumb>0</uThumb>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define>rvmdk PART_TM4C123GH6PM TARGET_IS_TM4C123_RB1</Define>
+ <Undefine></Undefine>
+ <IncludePath>..\..\..\..;</IncludePath>
+ </VariousControls>
+ </Cads>
+ <Aads>
+ <interw>1</interw>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <thumb>0</thumb>
+ <SplitLS>0</SplitLS>
+ <SwStkChk>0</SwStkChk>
+ <NoWarn>0</NoWarn>
+ <VariousControls>
+ <MiscControls></MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Aads>
+ <LDads>
+ <umfTarg>0</umfTarg>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <noStLib>0</noStLib>
+ <RepFail>1</RepFail>
+ <useFile>0</useFile>
+ <TextAddressRange>0x00000000</TextAddressRange>
+ <DataAddressRange>0x20000000</DataAddressRange>
+ <ScatterFile>uart_echo.sct</ScatterFile>
+ <IncludeLibs></IncludeLibs>
+ <IncludeLibsPath></IncludeLibsPath>
+ <Misc>--entry Reset_Handler</Misc>
+ <LinkerInputFile></LinkerInputFile>
+ <DisabledWarnings></DisabledWarnings>
+ </LDads>
+ </TargetArmAds>
+ </TargetOption>
+ <Groups>
+ <Group>
+ <GroupName>Source</GroupName>
+ <Files>
+ <File>
+ <FileName>startup_rvmdk.S</FileName>
+ <FileType>2</FileType>
+ <FilePath>.\startup_rvmdk.S</FilePath>
+ </File>
+ <File>
+ <FileName>uart_echo.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>.\uart_echo.c</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>Libraries</GroupName>
+ <Files>
+ <File>
+ <FileName>driverlib.lib</FileName>
+ <FileType>4</FileType>
+ <FilePath>..\..\..\..\driverlib\rvmdk\driverlib.lib</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>Documentation</GroupName>
+ <Files>
+ <File>
+ <FileName>readme.txt</FileName>
+ <FileType>5</FileType>
+ <FilePath>.\readme.txt</FilePath>
+ </File>
+ </Files>
+ </Group>
+ </Groups>
+ </Target>
+ </Targets>
+
+</Project>
diff --git a/boards/ek-tm4c123gxl/uart_echo/uart_echo_ccs.cmd b/boards/ek-tm4c123gxl/uart_echo/uart_echo_ccs.cmd new file mode 100644 index 0000000..a2860f1 --- /dev/null +++ b/boards/ek-tm4c123gxl/uart_echo/uart_echo_ccs.cmd @@ -0,0 +1,70 @@ +/******************************************************************************
+ *
+ * uart_echo_ccs.cmd - CCS linker configuration file for uart_echo.
+ *
+ * Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+ * Software License Agreement
+ *
+ * Texas Instruments (TI) is supplying this software for use solely and
+ * exclusively on TI's microcontroller products. The software is owned by
+ * TI and/or its suppliers, and is protected under applicable copyright
+ * laws. You may not combine this software with "viral" open-source
+ * software in order to form a larger program.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+ * NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+ * NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+ * CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+ * DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ * This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+ *
+ *****************************************************************************/
+
+--retain=g_pfnVectors
+
+/* The following command line options are set as part of the CCS project. */
+/* If you are building using the command line, or for some reason want to */
+/* define them here, you can uncomment and modify these lines as needed. */
+/* If you are using CCS for building, it is probably better to make any such */
+/* modifications in your CCS project and leave this file alone. */
+/* */
+/* --heap_size=0 */
+/* --stack_size=256 */
+/* --library=rtsv7M3_T_le_eabi.lib */
+
+/* The starting address of the application. Normally the interrupt vectors */
+/* must be located at the beginning of the application. */
+#define APP_BASE 0x00000000
+#define RAM_BASE 0x20000000
+
+/* System memory map */
+
+MEMORY
+{
+ /* Application stored in and executes from internal flash */
+ FLASH (RX) : origin = APP_BASE, length = 0x00040000
+ /* Application uses internal RAM for data */
+ SRAM (RWX) : origin = 0x20000000, length = 0x00008000
+}
+
+/* Section allocation in memory */
+
+SECTIONS
+{
+ .intvecs: > APP_BASE
+ .text : > FLASH
+ .const : > FLASH
+ .cinit : > FLASH
+ .pinit : > FLASH
+ .init_array : > FLASH
+
+ .vtable : > RAM_BASE
+ .data : > SRAM
+ .bss : > SRAM
+ .sysmem : > SRAM
+ .stack : > SRAM
+}
+
+__STACK_TOP = __stack + 256;
diff --git a/boards/ek-tm4c123gxl/udma_demo/Makefile b/boards/ek-tm4c123gxl/udma_demo/Makefile new file mode 100644 index 0000000..ba7ea5a --- /dev/null +++ b/boards/ek-tm4c123gxl/udma_demo/Makefile @@ -0,0 +1,87 @@ +#******************************************************************************
+#
+# Makefile - Rules for building the uDMA example.
+#
+# Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+# Software License Agreement
+#
+# Texas Instruments (TI) is supplying this software for use solely and
+# exclusively on TI's microcontroller products. The software is owned by
+# TI and/or its suppliers, and is protected under applicable copyright
+# laws. You may not combine this software with "viral" open-source
+# software in order to form a larger program.
+#
+# THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+# NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+# NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+# CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+# DAMAGES, FOR ANY REASON WHATSOEVER.
+#
+# This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+#
+#******************************************************************************
+
+#
+# Defines the part type that this project uses.
+#
+PART=TM4C123GH6PM
+
+#
+# The base directory for TivaWare.
+#
+ROOT=../../../..
+
+#
+# Include the common make definitions.
+#
+include ${ROOT}/makedefs
+
+#
+# Where to find source files that do not live in this directory.
+#
+VPATH=../../../../utils
+
+#
+# Where to find header files that do not live in the source directory.
+#
+IPATH=../../../..
+
+#
+# The default rule, which causes the uDMA example to be built.
+#
+all: ${COMPILER}
+all: ${COMPILER}/udma_demo.axf
+
+#
+# The rule to clean out all the build products.
+#
+clean:
+ @rm -rf ${COMPILER} ${wildcard *~}
+
+#
+# The rule to create the target directory.
+#
+${COMPILER}:
+ @mkdir -p ${COMPILER}
+
+#
+# Rules for building the uDMA example.
+#
+${COMPILER}/udma_demo.axf: ${COMPILER}/cpu_usage.o
+${COMPILER}/udma_demo.axf: ${COMPILER}/startup_${COMPILER}.o
+${COMPILER}/udma_demo.axf: ${COMPILER}/uartstdio.o
+${COMPILER}/udma_demo.axf: ${COMPILER}/udma_demo.o
+${COMPILER}/udma_demo.axf: ${COMPILER}/ustdlib.o
+${COMPILER}/udma_demo.axf: ${ROOT}/driverlib/${COMPILER}/libdriver.a
+${COMPILER}/udma_demo.axf: udma_demo.ld
+SCATTERgcc_udma_demo=udma_demo.ld
+ENTRY_udma_demo=ResetISR
+CFLAGSgcc=-DTARGET_IS_TM4C123_RB1
+
+#
+# Include the automatically generated dependency files.
+#
+ifneq (${MAKECMDGOALS},clean)
+-include ${wildcard ${COMPILER}/*.d} __dummy__
+endif
diff --git a/boards/ek-tm4c123gxl/udma_demo/ccs/.ccsimportspec b/boards/ek-tm4c123gxl/udma_demo/ccs/.ccsimportspec new file mode 100644 index 0000000..aea8941 --- /dev/null +++ b/boards/ek-tm4c123gxl/udma_demo/ccs/.ccsimportspec @@ -0,0 +1,8 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<importSpec>
+ <source root="..">
+ <file name="udma_demo.c"/>
+ <file regex=".*_ccs\.cmd"/>
+ <file name="startup_ccs.c"/>
+ </source>
+</importSpec>
diff --git a/boards/ek-tm4c123gxl/udma_demo/ccs/.ccsproject b/boards/ek-tm4c123gxl/udma_demo/ccs/.ccsproject new file mode 100644 index 0000000..75fb50e --- /dev/null +++ b/boards/ek-tm4c123gxl/udma_demo/ccs/.ccsproject @@ -0,0 +1,10 @@ +<?xml version="1.0" encoding="UTF-8" ?>
+<?ccsproject version="1.0"?>
+<projectOptions>
+ <deviceVariant value="Cortex M.TM4C123GH6PM"/>
+ <deviceFamily value="TMS470"/>
+ <deviceEndianness value="little"/>
+ <codegenToolVersion value="5.0.4"/>
+ <isElfFormat value="true"/>
+ <rts value="libc.a"/>
+</projectOptions>
diff --git a/boards/ek-tm4c123gxl/udma_demo/ccs/.cproject b/boards/ek-tm4c123gxl/udma_demo/ccs/.cproject new file mode 100644 index 0000000..5dbb724 --- /dev/null +++ b/boards/ek-tm4c123gxl/udma_demo/ccs/.cproject @@ -0,0 +1,187 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+ <storageModule configRelations="2" moduleId="org.eclipse.cdt.core.settings">
+ <cconfiguration id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1644318542">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1644318542" moduleId="org.eclipse.cdt.core.settings" name="Debug">
+ <macros>
+ <stringMacro name="SW_ROOT" type="VALUE_PATH_DIR" value="${PROJECT_ROOT}/../../../../.."/>
+ </macros>
+ <externalSettings/>
+ <extensions>
+ <extension id="com.ti.ccstudio.binaryparser.CoffParser" point="org.eclipse.cdt.core.BinaryParser"/>
+ <extension id="com.ti.ccstudio.errorparser.CoffErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.LinkErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.AsmErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactExtension="out" artifactName="${ProjName}" buildProperties="" cleanCommand="${CG_CLEAN_CMD}" description="" id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1644318542" name="Debug" parent="com.ti.ccstudio.buildDefinitions.TMS470.Debug" postbuildStep=""${CCE_INSTALL_ROOT}/utils/tiobj2bin/tiobj2bin" "${BuildArtifactFileName}" "${BuildArtifactFileBaseName}.bin" "${CG_TOOL_ROOT}/bin/armofd" "${CG_TOOL_ROOT}/bin/armhex" "${CCE_INSTALL_ROOT}/utils/tiobj2bin/mkhex4bin"">
+ <folderInfo id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1644318542." name="/" resourcePath="">
+ <toolChain id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.DebugToolchain.1670298775" name="TI Build Tools" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.DebugToolchain" targetTool="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug.764688852">
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS.449377026" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS" valueType="stringList">
+ <listOptionValue builtIn="false" value="DEVICE_CONFIGURATION_ID=Cortex M.TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="DEVICE_ENDIANNESS=little"/>
+ <listOptionValue builtIn="false" value="OUTPUT_FORMAT=ELF"/>
+ <listOptionValue builtIn="false" value="CCS_MBS_VERSION=5.1.0.01"/>
+ <listOptionValue builtIn="false" value="RUNTIME_SUPPORT_LIBRARY=libc.a"/>
+ <listOptionValue builtIn="false" value="OUTPUT_TYPE=executable"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION.333263710" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION" value="5.0.4" valueType="string"/>
+ <targetPlatform id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformDebug.728288435" name="Platform" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformDebug"/>
+ <builder buildPath="${BuildDirectory}" id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderDebug.1213754917" name="GNU Make.Debug" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderDebug"/>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerDebug.749119606" name="ARM Compiler" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerDebug">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.872348890" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.7M4" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.1353745838" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.261935328" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.eabi" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.1279898088" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.FPv4SPD16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL.1938707067" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL.SYMDEBUG__DWARF" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING.1262556705" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING" valueType="stringList">
+ <listOptionValue builtIn="false" value="225"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER.954398539" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.1453502754" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH.264260185" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH" valueType="includePath">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN.455335763" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.1801238591" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.on" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL.1525254995" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL.2" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC.1382668154" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL.75177497" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE.1007623085" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE" valueType="definedSymbols">
+ <listOptionValue builtIn="false" value="ccs="ccs""/>
+ <listOptionValue builtIn="false" value="PART_TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="TARGET_IS_TM4C123_RB1"/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS.1530351402" name="C Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS.2017928215" name="C++ Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS.1062474871" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS.225392878" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS"/>
+ </tool>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug.764688852" name="ARM Linker" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE.1191254632" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE" value=""udma_demo_ccs.map"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE.846579100" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE" value="1024" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE.826639255" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE" value="0" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE.52549502" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE" value=""${ProjName}.out"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO.1703791881" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO" value=""${ProjName}_linkInfo.xml"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER.471110067" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.1792679663" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH.11044004" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH" valueType="libPaths">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/lib""/>
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY.1872864029" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY" valueType="libs">
+ <listOptionValue builtIn="false" value=""libc.a""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/driverlib/ccs/Debug/driverlib.lib""/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS.153698571" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS.1791536799" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS.364441260" name="Generated Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS"/>
+ </tool>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ <cconfiguration id="com.ti.ccstudio.buildDefinitions.TMS470.Release.471138108">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.ti.ccstudio.buildDefinitions.TMS470.Release.471138108" moduleId="org.eclipse.cdt.core.settings" name="Release">
+ <macros>
+ <stringMacro name="SW_ROOT" type="VALUE_PATH_DIR" value="${PROJECT_ROOT}/../../../../.."/>
+ </macros>
+ <externalSettings/>
+ <extensions>
+ <extension id="com.ti.ccstudio.binaryparser.CoffParser" point="org.eclipse.cdt.core.BinaryParser"/>
+ <extension id="com.ti.ccstudio.errorparser.CoffErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.LinkErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.AsmErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactExtension="out" artifactName="${ProjName}" buildProperties="" cleanCommand="${CG_CLEAN_CMD}" description="" id="com.ti.ccstudio.buildDefinitions.TMS470.Release.471138108" name="Release" parent="com.ti.ccstudio.buildDefinitions.TMS470.Release" postbuildStep=""${CCE_INSTALL_ROOT}/utils/tiobj2bin/tiobj2bin" "${BuildArtifactFileName}" "${BuildArtifactFileBaseName}.bin" "${CG_TOOL_ROOT}/bin/armofd" "${CG_TOOL_ROOT}/bin/armhex" "${CCE_INSTALL_ROOT}/utils/tiobj2bin/mkhex4bin"">
+ <folderInfo id="com.ti.ccstudio.buildDefinitions.TMS470.Release.471138108." name="/" resourcePath="">
+ <toolChain id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.ReleaseToolchain.803492203" name="TI Build Tools" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.ReleaseToolchain" targetTool="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease.1539183967">
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS.914017699" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS" valueType="stringList">
+ <listOptionValue builtIn="false" value="DEVICE_CONFIGURATION_ID=Cortex M.TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="DEVICE_ENDIANNESS=little"/>
+ <listOptionValue builtIn="false" value="OUTPUT_FORMAT=ELF"/>
+ <listOptionValue builtIn="false" value="CCS_MBS_VERSION=5.1.0.01"/>
+ <listOptionValue builtIn="false" value="RUNTIME_SUPPORT_LIBRARY=libc.a"/>
+ <listOptionValue builtIn="false" value="OUTPUT_TYPE=executable"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION.978005986" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION" value="5.0.4" valueType="string"/>
+ <targetPlatform id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformRelease.1995960346" name="Platform" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformRelease"/>
+ <builder buildPath="${BuildDirectory}" id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderRelease.786417147" name="GNU Make.Release" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderRelease"/>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerRelease.1381071607" name="ARM Compiler" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerRelease">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.1515493332" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.7M4" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.1348749979" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.1390236408" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.eabi" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.1387673352" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.FPv4SPD16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING.215171467" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING" valueType="stringList">
+ <listOptionValue builtIn="false" value="225"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER.1988621664" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.1852671189" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH.1673681313" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH" valueType="includePath">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN.333762231" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.1040144968" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.on" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC.1772679800" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL.1774078827" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE.567336312" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE" valueType="definedSymbols">
+ <listOptionValue builtIn="false" value="ccs="ccs""/>
+ <listOptionValue builtIn="false" value="PART_TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="TARGET_IS_TM4C123_RB1"/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS.233239590" name="C Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS.1925054942" name="C++ Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS.278383084" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS.718798063" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS"/>
+ </tool>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease.1539183967" name="ARM Linker" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE.1998626218" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE" value=""udma_demo_ccs.map"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE.772637652" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE" value="1024" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE.21676758" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE" value="0" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE.1231323478" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE" value=""${ProjName}.out"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO.195355672" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO" value=""${ProjName}_linkInfo.xml"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER.1032208586" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.1054228870" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH.52208711" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH" valueType="libPaths">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/lib""/>
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY.1603488345" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY" valueType="libs">
+ <listOptionValue builtIn="false" value=""libc.a""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/driverlib/ccs/Debug/driverlib.lib""/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS.676246838" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS.328169104" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS.1948874793" name="Generated Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS"/>
+ </tool>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <project id="udma_demo.com.ti.ccstudio.buildDefinitions.TMS470.ProjectType.1267437559" name="ARM" projectType="com.ti.ccstudio.buildDefinitions.TMS470.ProjectType"/>
+ </storageModule>
+ <storageModule moduleId="scannerConfiguration"/>
+ <storageModule moduleId="org.eclipse.cdt.core.language.mapping">
+ <project-mappings>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.asmSource" language="com.ti.ccstudio.core.TIASMLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cHeader" language="com.ti.ccstudio.core.TIGCCLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cSource" language="com.ti.ccstudio.core.TIGCCLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cxxHeader" language="com.ti.ccstudio.core.TIGPPLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cxxSource" language="com.ti.ccstudio.core.TIGPPLanguage"/>
+ </project-mappings>
+ </storageModule>
+</cproject>
diff --git a/boards/ek-tm4c123gxl/udma_demo/ccs/.project b/boards/ek-tm4c123gxl/udma_demo/ccs/.project new file mode 100644 index 0000000..f8e3d81 --- /dev/null +++ b/boards/ek-tm4c123gxl/udma_demo/ccs/.project @@ -0,0 +1,65 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+ <name>udma_demo</name>
+ <comment></comment>
+ <projects>
+ </projects>
+ <buildSpec>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+ <triggers>full,incremental,</triggers>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ </buildSpec>
+ <natures>
+ <nature>com.ti.ccstudio.core.ccsNature</nature>
+ <nature>org.eclipse.cdt.core.cnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+ <nature>org.eclipse.cdt.core.ccnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+ </natures>
+ <linkedResources>
+ <link>
+ <name>startup_ccs.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/udma_demo/startup_ccs.c</locationURI>
+ </link>
+ <link>
+ <name>udma_demo.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/udma_demo/udma_demo.c</locationURI>
+ </link>
+ <link>
+ <name>udma_demo_ccs.cmd</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/udma_demo/udma_demo_ccs.cmd</locationURI>
+ </link>
+ <link>
+ <name>utils/cpu_usage.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/utils/cpu_usage.c</locationURI>
+ </link>
+ <link>
+ <name>utils/uartstdio.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/utils/uartstdio.c</locationURI>
+ </link>
+ <link>
+ <name>utils/ustdlib.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/utils/ustdlib.c</locationURI>
+ </link>
+ </linkedResources>
+ <variableList>
+ <variable>
+ <name>SW_ROOT</name>
+ <value>$%7BPARENT-5-PROJECT_LOC%7D</value>
+ </variable>
+ </variableList>
+</projectDescription>
diff --git a/boards/ek-tm4c123gxl/udma_demo/ccs/.settings/org.eclipse.cdt.codan.core.prefs b/boards/ek-tm4c123gxl/udma_demo/ccs/.settings/org.eclipse.cdt.codan.core.prefs new file mode 100644 index 0000000..98b6350 --- /dev/null +++ b/boards/ek-tm4c123gxl/udma_demo/ccs/.settings/org.eclipse.cdt.codan.core.prefs @@ -0,0 +1,3 @@ +eclipse.preferences.version=1
+inEditor=false
+onBuild=false
diff --git a/boards/ek-tm4c123gxl/udma_demo/ccs/Debug/udma_demo.bin b/boards/ek-tm4c123gxl/udma_demo/ccs/Debug/udma_demo.bin Binary files differnew file mode 100644 index 0000000..af6dd16 --- /dev/null +++ b/boards/ek-tm4c123gxl/udma_demo/ccs/Debug/udma_demo.bin diff --git a/boards/ek-tm4c123gxl/udma_demo/ccs/Debug/udma_demo.out b/boards/ek-tm4c123gxl/udma_demo/ccs/Debug/udma_demo.out Binary files differnew file mode 100644 index 0000000..2f91b7a --- /dev/null +++ b/boards/ek-tm4c123gxl/udma_demo/ccs/Debug/udma_demo.out diff --git a/boards/ek-tm4c123gxl/udma_demo/ccs/macros.ini_initial b/boards/ek-tm4c123gxl/udma_demo/ccs/macros.ini_initial new file mode 100644 index 0000000..31214b5 --- /dev/null +++ b/boards/ek-tm4c123gxl/udma_demo/ccs/macros.ini_initial @@ -0,0 +1 @@ +SW_ROOT = ../../../../..
diff --git a/boards/ek-tm4c123gxl/udma_demo/ccs/target_config.ccxml b/boards/ek-tm4c123gxl/udma_demo/ccs/target_config.ccxml new file mode 100644 index 0000000..be4342a --- /dev/null +++ b/boards/ek-tm4c123gxl/udma_demo/ccs/target_config.ccxml @@ -0,0 +1,13 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<configurations XML_version="1.2" id="configurations_0">
+ <configuration XML_version="1.2" id="Stellaris In-Circuit Debug Interface_0">
+ <instance XML_version="1.2" desc="Stellaris In-Circuit Debug Interface_0" href="connections/Stellaris_ICDI_Connection.xml" id="Stellaris In-Circuit Debug Interface_0" xml="Stellaris_ICDI_Connection.xml" xmlpath="connections"/>
+ <connection XML_version="1.2" id="Stellaris In-Circuit Debug Interface_0">
+ <instance XML_version="1.2" href="drivers/stellaris_cs_dap.xml" id="drivers" xml="stellaris_cs_dap.xml" xmlpath="drivers"/>
+ <instance XML_version="1.2" href="drivers/stellaris_cortex_m4.xml" id="drivers" xml="stellaris_cortex_m4.xml" xmlpath="drivers"/>
+ <platform XML_version="1.2" id="platform_0">
+ <instance XML_version="1.2" desc="Stellaris TM4C123GH6PM_0" href="devices/tm4c123gh6pm.xml" id="Stellaris TM4C123GH6PM_0" xml="tm4c123gh6pm.xml" xmlpath="devices"/>
+ </platform>
+ </connection>
+ </configuration>
+</configurations>
diff --git a/boards/ek-tm4c123gxl/udma_demo/ewarm/Exe/udma_demo.bin b/boards/ek-tm4c123gxl/udma_demo/ewarm/Exe/udma_demo.bin Binary files differnew file mode 100644 index 0000000..677acc2 --- /dev/null +++ b/boards/ek-tm4c123gxl/udma_demo/ewarm/Exe/udma_demo.bin diff --git a/boards/ek-tm4c123gxl/udma_demo/ewarm/Exe/udma_demo.out b/boards/ek-tm4c123gxl/udma_demo/ewarm/Exe/udma_demo.out Binary files differnew file mode 100644 index 0000000..3f5e734 --- /dev/null +++ b/boards/ek-tm4c123gxl/udma_demo/ewarm/Exe/udma_demo.out diff --git a/boards/ek-tm4c123gxl/udma_demo/gcc/udma_demo.axf b/boards/ek-tm4c123gxl/udma_demo/gcc/udma_demo.axf Binary files differnew file mode 100644 index 0000000..250b390 --- /dev/null +++ b/boards/ek-tm4c123gxl/udma_demo/gcc/udma_demo.axf diff --git a/boards/ek-tm4c123gxl/udma_demo/gcc/udma_demo.bin b/boards/ek-tm4c123gxl/udma_demo/gcc/udma_demo.bin Binary files differnew file mode 100644 index 0000000..1390d51 --- /dev/null +++ b/boards/ek-tm4c123gxl/udma_demo/gcc/udma_demo.bin diff --git a/boards/ek-tm4c123gxl/udma_demo/readme.txt b/boards/ek-tm4c123gxl/udma_demo/readme.txt new file mode 100644 index 0000000..1f2c39f --- /dev/null +++ b/boards/ek-tm4c123gxl/udma_demo/readme.txt @@ -0,0 +1,28 @@ +uDMA
+
+This example application demonstrates the use of the uDMA controller to
+transfer data between memory buffers, and to transfer data to and from a
+UART. The test runs for 10 seconds before exiting.
+
+UART0, connected to the FTDI virtual COM port and running at 115,200,
+8-N-1, is used to display messages from this application.
+
+-------------------------------------------------------------------------------
+
+Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+Software License Agreement
+
+Texas Instruments (TI) is supplying this software for use solely and
+exclusively on TI's microcontroller products. The software is owned by
+TI and/or its suppliers, and is protected under applicable copyright
+laws. You may not combine this software with "viral" open-source
+software in order to form a larger program.
+
+THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+DAMAGES, FOR ANY REASON WHATSOEVER.
+
+This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
diff --git a/boards/ek-tm4c123gxl/udma_demo/rvmdk/udma_demo.axf b/boards/ek-tm4c123gxl/udma_demo/rvmdk/udma_demo.axf Binary files differnew file mode 100644 index 0000000..d2fc369 --- /dev/null +++ b/boards/ek-tm4c123gxl/udma_demo/rvmdk/udma_demo.axf diff --git a/boards/ek-tm4c123gxl/udma_demo/rvmdk/udma_demo.bin b/boards/ek-tm4c123gxl/udma_demo/rvmdk/udma_demo.bin Binary files differnew file mode 100644 index 0000000..972f626 --- /dev/null +++ b/boards/ek-tm4c123gxl/udma_demo/rvmdk/udma_demo.bin diff --git a/boards/ek-tm4c123gxl/udma_demo/startup_ccs.c b/boards/ek-tm4c123gxl/udma_demo/startup_ccs.c new file mode 100644 index 0000000..ca4321f --- /dev/null +++ b/boards/ek-tm4c123gxl/udma_demo/startup_ccs.c @@ -0,0 +1,305 @@ +//*****************************************************************************
+//
+// startup_ccs.c - Startup code for use with TI's Code Composer Studio.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// External declaration for the reset handler that is to be called when the
+// processor is started
+//
+//*****************************************************************************
+extern void _c_int00(void);
+
+//*****************************************************************************
+//
+// Linker variable that marks the top of the stack.
+//
+//*****************************************************************************
+extern uint32_t __STACK_TOP;
+
+//*****************************************************************************
+//
+// External declarations for the interrupt handlers used by the application.
+//
+//*****************************************************************************
+extern void SysTickHandler(void);
+extern void UART1IntHandler(void);
+extern void uDMAIntHandler(void);
+extern void uDMAErrorHandler(void);
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000 or at the start of
+// the program if located at a start address other than 0.
+//
+//*****************************************************************************
+#pragma DATA_SECTION(g_pfnVectors, ".intvecs")
+void (* const g_pfnVectors[])(void) =
+{
+ (void (*)(void))((uint32_t)&__STACK_TOP),
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ SysTickHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ IntDefaultHandler, // UART0 Rx and Tx
+ UART1IntHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ IntDefaultHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ uDMAIntHandler, // uDMA Software Transfer
+ uDMAErrorHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ //
+ // Jump to the CCS C initialization routine. This will enable the
+ // floating-point unit as well, so that does not need to be done here.
+ //
+ __asm(" .global _c_int00\n"
+ " b.w _c_int00");
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/udma_demo/startup_ewarm.c b/boards/ek-tm4c123gxl/udma_demo/startup_ewarm.c new file mode 100644 index 0000000..ab0adc3 --- /dev/null +++ b/boards/ek-tm4c123gxl/udma_demo/startup_ewarm.c @@ -0,0 +1,336 @@ +//*****************************************************************************
+//
+// startup_ewarm.c - Startup code for use with IAR's Embedded Workbench,
+// version 5.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Enable the IAR extensions for this source file.
+//
+//*****************************************************************************
+#pragma language=extended
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// External declarations for the interrupt handlers used by the application.
+//
+//*****************************************************************************
+extern void SysTickHandler(void);
+extern void UART1IntHandler(void);
+extern void uDMAIntHandler(void);
+extern void uDMAErrorHandler(void);
+
+//*****************************************************************************
+//
+// The entry point for the application startup code.
+//
+//*****************************************************************************
+extern void __iar_program_start(void);
+
+//*****************************************************************************
+//
+// Reserve space for the system stack.
+//
+//*****************************************************************************
+static uint32_t pui32Stack[256] @ ".noinit";
+
+//*****************************************************************************
+//
+// A union that describes the entries of the vector table. The union is needed
+// since the first entry is the stack pointer and the remainder are function
+// pointers.
+//
+//*****************************************************************************
+typedef union
+{
+ void (*pfnHandler)(void);
+ uint32_t ui32Ptr;
+}
+uVectorEntry;
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000.
+//
+//*****************************************************************************
+__root const uVectorEntry __vector_table[] @ ".intvec" =
+{
+ { .ui32Ptr = (uint32_t)pui32Stack + sizeof(pui32Stack) },
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ SysTickHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ IntDefaultHandler, // UART0 Rx and Tx
+ UART1IntHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ IntDefaultHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ uDMAIntHandler, // uDMA Software Transfer
+ uDMAErrorHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ //
+ // Enable the floating-point unit. This must be done here to handle the
+ // case where main() uses floating-point and the function prologue saves
+ // floating-point registers (which will fault if floating-point is not
+ // enabled). Any configuration of the floating-point unit using DriverLib
+ // APIs must be done here prior to the floating-point unit being enabled.
+ //
+ // Note that this does not use DriverLib since it might not be included in
+ // this project.
+ //
+ HWREG(NVIC_CPAC) = ((HWREG(NVIC_CPAC) &
+ ~(NVIC_CPAC_CP10_M | NVIC_CPAC_CP11_M)) |
+ NVIC_CPAC_CP10_FULL | NVIC_CPAC_CP11_FULL);
+
+ //
+ // Call the application's entry point.
+ //
+ __iar_program_start();
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/udma_demo/startup_gcc.c b/boards/ek-tm4c123gxl/udma_demo/startup_gcc.c new file mode 100644 index 0000000..0ef8a3d --- /dev/null +++ b/boards/ek-tm4c123gxl/udma_demo/startup_gcc.c @@ -0,0 +1,352 @@ +//*****************************************************************************
+//
+// startup_gcc.c - Startup code for use with GNU tools.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// External declarations for the interrupt handlers used by the application.
+//
+//*****************************************************************************
+extern void SysTickHandler(void);
+extern void UART1IntHandler(void);
+extern void uDMAIntHandler(void);
+extern void uDMAErrorHandler(void);
+
+//*****************************************************************************
+//
+// The entry point for the application.
+//
+//*****************************************************************************
+extern int main(void);
+
+//*****************************************************************************
+//
+// Reserve space for the system stack.
+//
+//*****************************************************************************
+static uint32_t pui32Stack[256];
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000.
+//
+//*****************************************************************************
+__attribute__ ((section(".isr_vector")))
+void (* const g_pfnVectors[])(void) =
+{
+ (void (*)(void))((uint32_t)pui32Stack + sizeof(pui32Stack)),
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ SysTickHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ IntDefaultHandler, // UART0 Rx and Tx
+ UART1IntHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ IntDefaultHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ uDMAIntHandler, // uDMA Software Transfer
+ uDMAErrorHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// The following are constructs created by the linker, indicating where the
+// the "data" and "bss" segments reside in memory. The initializers for the
+// for the "data" segment resides immediately following the "text" segment.
+//
+//*****************************************************************************
+extern uint32_t _etext;
+extern uint32_t _data;
+extern uint32_t _edata;
+extern uint32_t _bss;
+extern uint32_t _ebss;
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ uint32_t *pui32Src, *pui32Dest;
+
+ //
+ // Copy the data segment initializers from flash to SRAM.
+ //
+ pui32Src = &_etext;
+ for(pui32Dest = &_data; pui32Dest < &_edata; )
+ {
+ *pui32Dest++ = *pui32Src++;
+ }
+
+ //
+ // Zero fill the bss segment.
+ //
+ __asm(" ldr r0, =_bss\n"
+ " ldr r1, =_ebss\n"
+ " mov r2, #0\n"
+ " .thumb_func\n"
+ "zero_loop:\n"
+ " cmp r0, r1\n"
+ " it lt\n"
+ " strlt r2, [r0], #4\n"
+ " blt zero_loop");
+
+ //
+ // Enable the floating-point unit. This must be done here to handle the
+ // case where main() uses floating-point and the function prologue saves
+ // floating-point registers (which will fault if floating-point is not
+ // enabled). Any configuration of the floating-point unit using DriverLib
+ // APIs must be done here prior to the floating-point unit being enabled.
+ //
+ // Note that this does not use DriverLib since it might not be included in
+ // this project.
+ //
+ HWREG(NVIC_CPAC) = ((HWREG(NVIC_CPAC) &
+ ~(NVIC_CPAC_CP10_M | NVIC_CPAC_CP11_M)) |
+ NVIC_CPAC_CP10_FULL | NVIC_CPAC_CP11_FULL);
+
+ //
+ // Call the application's entry point.
+ //
+ main();
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/udma_demo/startup_rvmdk.S b/boards/ek-tm4c123gxl/udma_demo/startup_rvmdk.S new file mode 100644 index 0000000..94c7ba1 --- /dev/null +++ b/boards/ek-tm4c123gxl/udma_demo/startup_rvmdk.S @@ -0,0 +1,361 @@ +; <<< Use Configuration Wizard in Context Menu >>>
+;******************************************************************************
+;
+; startup_rvmdk.S - Startup code for use with Keil's uVision.
+;
+; Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+; Software License Agreement
+;
+; Texas Instruments (TI) is supplying this software for use solely and
+; exclusively on TI's microcontroller products. The software is owned by
+; TI and/or its suppliers, and is protected under applicable copyright
+; laws. You may not combine this software with "viral" open-source
+; software in order to form a larger program.
+;
+; THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+; NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+; NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+; A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+; CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+; DAMAGES, FOR ANY REASON WHATSOEVER.
+;
+; This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+;
+;******************************************************************************
+
+;******************************************************************************
+;
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+;******************************************************************************
+Stack EQU 0x00000400
+
+;******************************************************************************
+;
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+;******************************************************************************
+Heap EQU 0x00000000
+
+;******************************************************************************
+;
+; Allocate space for the stack.
+;
+;******************************************************************************
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+StackMem
+ SPACE Stack
+__initial_sp
+
+;******************************************************************************
+;
+; Allocate space for the heap.
+;
+;******************************************************************************
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+HeapMem
+ SPACE Heap
+__heap_limit
+
+;******************************************************************************
+;
+; Indicate that the code in this file preserves 8-byte alignment of the stack.
+;
+;******************************************************************************
+ PRESERVE8
+
+;******************************************************************************
+;
+; Place code into the reset code section.
+;
+;******************************************************************************
+ AREA RESET, CODE, READONLY
+ THUMB
+
+;******************************************************************************
+;
+; External declarations for the interrupt handlers used by the application.
+;
+;******************************************************************************
+ EXTERN SysTickHandler
+ EXTERN UART1IntHandler
+ EXTERN uDMAIntHandler
+ EXTERN uDMAErrorHandler
+
+;******************************************************************************
+;
+; The vector table.
+;
+;******************************************************************************
+ EXPORT __Vectors
+__Vectors
+ DCD StackMem + Stack ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NmiSR ; NMI Handler
+ DCD FaultISR ; Hard Fault Handler
+ DCD IntDefaultHandler ; The MPU fault handler
+ DCD IntDefaultHandler ; The bus fault handler
+ DCD IntDefaultHandler ; The usage fault handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; SVCall handler
+ DCD IntDefaultHandler ; Debug monitor handler
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; The PendSV handler
+ DCD SysTickHandler ; The SysTick handler
+ DCD IntDefaultHandler ; GPIO Port A
+ DCD IntDefaultHandler ; GPIO Port B
+ DCD IntDefaultHandler ; GPIO Port C
+ DCD IntDefaultHandler ; GPIO Port D
+ DCD IntDefaultHandler ; GPIO Port E
+ DCD IntDefaultHandler ; UART0 Rx and Tx
+ DCD UART1IntHandler ; UART1 Rx and Tx
+ DCD IntDefaultHandler ; SSI0 Rx and Tx
+ DCD IntDefaultHandler ; I2C0 Master and Slave
+ DCD IntDefaultHandler ; PWM Fault
+ DCD IntDefaultHandler ; PWM Generator 0
+ DCD IntDefaultHandler ; PWM Generator 1
+ DCD IntDefaultHandler ; PWM Generator 2
+ DCD IntDefaultHandler ; Quadrature Encoder 0
+ DCD IntDefaultHandler ; ADC Sequence 0
+ DCD IntDefaultHandler ; ADC Sequence 1
+ DCD IntDefaultHandler ; ADC Sequence 2
+ DCD IntDefaultHandler ; ADC Sequence 3
+ DCD IntDefaultHandler ; Watchdog timer
+ DCD IntDefaultHandler ; Timer 0 subtimer A
+ DCD IntDefaultHandler ; Timer 0 subtimer B
+ DCD IntDefaultHandler ; Timer 1 subtimer A
+ DCD IntDefaultHandler ; Timer 1 subtimer B
+ DCD IntDefaultHandler ; Timer 2 subtimer A
+ DCD IntDefaultHandler ; Timer 2 subtimer B
+ DCD IntDefaultHandler ; Analog Comparator 0
+ DCD IntDefaultHandler ; Analog Comparator 1
+ DCD IntDefaultHandler ; Analog Comparator 2
+ DCD IntDefaultHandler ; System Control (PLL, OSC, BO)
+ DCD IntDefaultHandler ; FLASH Control
+ DCD IntDefaultHandler ; GPIO Port F
+ DCD IntDefaultHandler ; GPIO Port G
+ DCD IntDefaultHandler ; GPIO Port H
+ DCD IntDefaultHandler ; UART2 Rx and Tx
+ DCD IntDefaultHandler ; SSI1 Rx and Tx
+ DCD IntDefaultHandler ; Timer 3 subtimer A
+ DCD IntDefaultHandler ; Timer 3 subtimer B
+ DCD IntDefaultHandler ; I2C1 Master and Slave
+ DCD IntDefaultHandler ; Quadrature Encoder 1
+ DCD IntDefaultHandler ; CAN0
+ DCD IntDefaultHandler ; CAN1
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; Hibernate
+ DCD IntDefaultHandler ; USB0
+ DCD IntDefaultHandler ; PWM Generator 3
+ DCD uDMAIntHandler ; uDMA Software Transfer
+ DCD uDMAErrorHandler ; uDMA Error
+ DCD IntDefaultHandler ; ADC1 Sequence 0
+ DCD IntDefaultHandler ; ADC1 Sequence 1
+ DCD IntDefaultHandler ; ADC1 Sequence 2
+ DCD IntDefaultHandler ; ADC1 Sequence 3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; GPIO Port J
+ DCD IntDefaultHandler ; GPIO Port K
+ DCD IntDefaultHandler ; GPIO Port L
+ DCD IntDefaultHandler ; SSI2 Rx and Tx
+ DCD IntDefaultHandler ; SSI3 Rx and Tx
+ DCD IntDefaultHandler ; UART3 Rx and Tx
+ DCD IntDefaultHandler ; UART4 Rx and Tx
+ DCD IntDefaultHandler ; UART5 Rx and Tx
+ DCD IntDefaultHandler ; UART6 Rx and Tx
+ DCD IntDefaultHandler ; UART7 Rx and Tx
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; I2C2 Master and Slave
+ DCD IntDefaultHandler ; I2C3 Master and Slave
+ DCD IntDefaultHandler ; Timer 4 subtimer A
+ DCD IntDefaultHandler ; Timer 4 subtimer B
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; Timer 5 subtimer A
+ DCD IntDefaultHandler ; Timer 5 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 0 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 0 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 1 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 1 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 2 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 2 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 3 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 3 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 4 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 4 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 5 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 5 subtimer B
+ DCD IntDefaultHandler ; FPU
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; I2C4 Master and Slave
+ DCD IntDefaultHandler ; I2C5 Master and Slave
+ DCD IntDefaultHandler ; GPIO Port M
+ DCD IntDefaultHandler ; GPIO Port N
+ DCD IntDefaultHandler ; Quadrature Encoder 2
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; GPIO Port P (Summary or P0)
+ DCD IntDefaultHandler ; GPIO Port P1
+ DCD IntDefaultHandler ; GPIO Port P2
+ DCD IntDefaultHandler ; GPIO Port P3
+ DCD IntDefaultHandler ; GPIO Port P4
+ DCD IntDefaultHandler ; GPIO Port P5
+ DCD IntDefaultHandler ; GPIO Port P6
+ DCD IntDefaultHandler ; GPIO Port P7
+ DCD IntDefaultHandler ; GPIO Port Q (Summary or Q0)
+ DCD IntDefaultHandler ; GPIO Port Q1
+ DCD IntDefaultHandler ; GPIO Port Q2
+ DCD IntDefaultHandler ; GPIO Port Q3
+ DCD IntDefaultHandler ; GPIO Port Q4
+ DCD IntDefaultHandler ; GPIO Port Q5
+ DCD IntDefaultHandler ; GPIO Port Q6
+ DCD IntDefaultHandler ; GPIO Port Q7
+ DCD IntDefaultHandler ; GPIO Port R
+ DCD IntDefaultHandler ; GPIO Port S
+ DCD IntDefaultHandler ; PWM 1 Generator 0
+ DCD IntDefaultHandler ; PWM 1 Generator 1
+ DCD IntDefaultHandler ; PWM 1 Generator 2
+ DCD IntDefaultHandler ; PWM 1 Generator 3
+ DCD IntDefaultHandler ; PWM 1 Fault
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor first starts execution
+; following a reset event.
+;
+;******************************************************************************
+ EXPORT Reset_Handler
+Reset_Handler
+ ;
+ ; Enable the floating-point unit. This must be done here to handle the
+ ; case where main() uses floating-point and the function prologue saves
+ ; floating-point registers (which will fault if floating-point is not
+ ; enabled). Any configuration of the floating-point unit using
+ ; DriverLib APIs must be done here prior to the floating-point unit
+ ; being enabled.
+ ;
+ ; Note that this does not use DriverLib since it might not be included
+ ; in this project.
+ ;
+ MOVW R0, #0xED88
+ MOVT R0, #0xE000
+ LDR R1, [R0]
+ ORR R1, #0x00F00000
+ STR R1, [R0]
+
+ ;
+ ; Call the C library enty point that handles startup. This will copy
+ ; the .data section initializers from flash to SRAM and zero fill the
+ ; .bss section.
+ ;
+ IMPORT __main
+ B __main
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives a NMI. This
+; simply enters an infinite loop, preserving the system state for examination
+; by a debugger.
+;
+;******************************************************************************
+NmiSR
+ B NmiSR
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives a fault
+; interrupt. This simply enters an infinite loop, preserving the system state
+; for examination by a debugger.
+;
+;******************************************************************************
+FaultISR
+ B FaultISR
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives an unexpected
+; interrupt. This simply enters an infinite loop, preserving the system state
+; for examination by a debugger.
+;
+;******************************************************************************
+IntDefaultHandler
+ B IntDefaultHandler
+
+;******************************************************************************
+;
+; Make sure the end of this section is aligned.
+;
+;******************************************************************************
+ ALIGN
+
+;******************************************************************************
+;
+; Some code in the normal code section for initializing the heap and stack.
+;
+;******************************************************************************
+ AREA |.text|, CODE, READONLY
+
+;******************************************************************************
+;
+; The function expected of the C library startup code for defining the stack
+; and heap memory locations. For the C library version of the startup code,
+; provide this function so that the C library initialization code can find out
+; the location of the stack and heap.
+;
+;******************************************************************************
+ IF :DEF: __MICROLIB
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+ ELSE
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+__user_initial_stackheap
+ LDR R0, =HeapMem
+ LDR R1, =(StackMem + Stack)
+ LDR R2, =(HeapMem + Heap)
+ LDR R3, =StackMem
+ BX LR
+ ENDIF
+
+;******************************************************************************
+;
+; Make sure the end of this section is aligned.
+;
+;******************************************************************************
+ ALIGN
+
+;******************************************************************************
+;
+; Tell the assembler that we're done.
+;
+;******************************************************************************
+ END
diff --git a/boards/ek-tm4c123gxl/udma_demo/udma_demo.c b/boards/ek-tm4c123gxl/udma_demo/udma_demo.c new file mode 100644 index 0000000..0466c2e --- /dev/null +++ b/boards/ek-tm4c123gxl/udma_demo/udma_demo.c @@ -0,0 +1,1012 @@ +//*****************************************************************************
+//
+// udma_demo.c - uDMA example.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "inc/hw_ints.h"
+#include "inc/hw_memmap.h"
+#include "inc/hw_types.h"
+#include "inc/hw_uart.h"
+#include "driverlib/fpu.h"
+#include "driverlib/gpio.h"
+#include "driverlib/interrupt.h"
+#include "driverlib/pin_map.h"
+#include "driverlib/rom.h"
+#include "driverlib/sysctl.h"
+#include "driverlib/systick.h"
+#include "driverlib/uart.h"
+#include "driverlib/udma.h"
+#include "utils/cpu_usage.h"
+#include "utils/uartstdio.h"
+#include "utils/ustdlib.h"
+
+//*****************************************************************************
+//
+//! \addtogroup example_list
+//! <h1>uDMA (udma_demo)</h1>
+//!
+//! This example application demonstrates the use of the uDMA controller to
+//! transfer data between memory buffers, and to transfer data to and from a
+//! UART. The test runs for 10 seconds before exiting.
+//!
+//! UART0, connected to the FTDI virtual COM port and running at 115,200,
+//! 8-N-1, is used to display messages from this application.
+//
+//*****************************************************************************
+
+//*****************************************************************************
+//
+// The number of SysTick ticks per second used for the SysTick interrupt.
+//
+//*****************************************************************************
+#define SYSTICKS_PER_SECOND 100
+
+//*****************************************************************************
+//
+// The size of the memory transfer source and destination buffers (in words).
+//
+//*****************************************************************************
+#define MEM_BUFFER_SIZE 1024
+
+//*****************************************************************************
+//
+// The size of the UART transmit and receive buffers. They do not need to be
+// the same size.
+//
+//*****************************************************************************
+#define UART_TXBUF_SIZE 256
+#define UART_RXBUF_SIZE 256
+
+//*****************************************************************************
+//
+// The source and destination buffers used for memory transfers.
+//
+//*****************************************************************************
+static uint32_t g_ui32SrcBuf[MEM_BUFFER_SIZE];
+static uint32_t g_ui32DstBuf[MEM_BUFFER_SIZE];
+
+//*****************************************************************************
+//
+// The transmit and receive buffers used for the UART transfers. There is one
+// transmit buffer and a pair of recieve ping-pong buffers.
+//
+//*****************************************************************************
+static uint8_t g_ui8TxBuf[UART_TXBUF_SIZE];
+static uint8_t g_ui8RxBufA[UART_RXBUF_SIZE];
+static uint8_t g_ui8RxBufB[UART_RXBUF_SIZE];
+
+//*****************************************************************************
+//
+// The count of uDMA errors. This value is incremented by the uDMA error
+// handler.
+//
+//*****************************************************************************
+static uint32_t g_ui32uDMAErrCount = 0;
+
+//*****************************************************************************
+//
+// The count of times the uDMA interrupt occurred but the uDMA transfer was not
+// complete. This should remain 0.
+//
+//*****************************************************************************
+static uint32_t g_ui32BadISR = 0;
+
+//*****************************************************************************
+//
+// The count of UART buffers filled, one for each ping-pong buffer.
+//
+//*****************************************************************************
+static uint32_t g_ui32RxBufACount = 0;
+static uint32_t g_ui32RxBufBCount = 0;
+
+//*****************************************************************************
+//
+// The count of memory uDMA transfer blocks. This value is incremented by the
+// uDMA interrupt handler whenever a memory block transfer is completed.
+//
+//*****************************************************************************
+static uint32_t g_ui32MemXferCount = 0;
+
+//*****************************************************************************
+//
+// The CPU usage in percent, in 16.16 fixed point format.
+//
+//*****************************************************************************
+static uint32_t g_ui32CPUUsage;
+
+//*****************************************************************************
+//
+// The number of seconds elapsed since the start of the program. This value is
+// maintained by the SysTick interrupt handler.
+//
+//*****************************************************************************
+static uint32_t g_ui32Seconds = 0;
+
+//*****************************************************************************
+//
+// The control table used by the uDMA controller. This table must be aligned
+// to a 1024 byte boundary.
+//
+//*****************************************************************************
+#if defined(ewarm)
+#pragma data_alignment=1024
+uint8_t ui8ControlTable[1024];
+#elif defined(ccs)
+#pragma DATA_ALIGN(ui8ControlTable, 1024)
+uint8_t ui8ControlTable[1024];
+#else
+uint8_t ui8ControlTable[1024] __attribute__ ((aligned(1024)));
+#endif
+
+//*****************************************************************************
+//
+// The error routine that is called if the driver library encounters an error.
+//
+//*****************************************************************************
+#ifdef DEBUG
+void
+__error__(char *pcFilename, uint32_t ui32Line)
+{
+ while(1)
+ {
+ //
+ // Hang on runtime error.
+ //
+ }
+}
+#endif
+
+//*****************************************************************************
+//
+// The interrupt handler for the SysTick timer. This handler will increment a
+// seconds counter whenever the appropriate number of ticks has occurred. It
+// will also call the CPU usage tick function to find the CPU usage percent.
+//
+//*****************************************************************************
+void
+SysTickHandler(void)
+{
+ static uint32_t ui32TickCount = 0;
+
+ //
+ // Increment the tick counter.
+ //
+ ui32TickCount++;
+
+ //
+ // If the number of ticks per second has occurred, then increment the
+ // seconds counter.
+ //
+ if(!(ui32TickCount % SYSTICKS_PER_SECOND))
+ {
+ g_ui32Seconds++;
+ }
+
+ //
+ // Call the CPU usage tick function. This function will compute the amount
+ // of cycles used by the CPU since the last call and return the result in
+ // percent in fixed point 16.16 format.
+ //
+ g_ui32CPUUsage = CPUUsageTick();
+}
+
+//*****************************************************************************
+//
+// The interrupt handler for uDMA errors. This interrupt will occur if the
+// uDMA encounters a bus error while trying to perform a transfer. This
+// handler just increments a counter if an error occurs.
+//
+//*****************************************************************************
+void
+uDMAErrorHandler(void)
+{
+ uint32_t ui32Status;
+
+ //
+ // Check for uDMA error bit
+ //
+ ui32Status = ROM_uDMAErrorStatusGet();
+
+ //
+ // If there is a uDMA error, then clear the error and increment
+ // the error counter.
+ //
+ if(ui32Status)
+ {
+ ROM_uDMAErrorStatusClear();
+ g_ui32uDMAErrCount++;
+ }
+}
+
+//*****************************************************************************
+//
+// The interrupt handler for uDMA interrupts from the memory channel. This
+// interrupt will increment a counter, and then restart another memory
+// transfer.
+//
+//*****************************************************************************
+void
+uDMAIntHandler(void)
+{
+ uint32_t ui32Mode;
+
+ //
+ // Check for the primary control structure to indicate complete.
+ //
+ ui32Mode = ROM_uDMAChannelModeGet(UDMA_CHANNEL_SW);
+ if(ui32Mode == UDMA_MODE_STOP)
+ {
+ //
+ // Increment the count of completed transfers.
+ //
+ g_ui32MemXferCount++;
+
+ //
+ // Configure it for another transfer.
+ //
+ ROM_uDMAChannelTransferSet(UDMA_CHANNEL_SW, UDMA_MODE_AUTO,
+ g_ui32SrcBuf, g_ui32DstBuf,
+ MEM_BUFFER_SIZE);
+
+ //
+ // Initiate another transfer.
+ //
+ ROM_uDMAChannelEnable(UDMA_CHANNEL_SW);
+ ROM_uDMAChannelRequest(UDMA_CHANNEL_SW);
+ }
+
+ //
+ // If the channel is not stopped, then something is wrong.
+ //
+ else
+ {
+ g_ui32BadISR++;
+ }
+}
+
+//*****************************************************************************
+//
+// The interrupt handler for UART1. This interrupt will occur when a DMA
+// transfer is complete using the UART1 uDMA channel. It will also be
+// triggered if the peripheral signals an error. This interrupt handler will
+// switch between receive ping-pong buffers A and B. It will also restart a TX
+// uDMA transfer if the prior transfer is complete. This will keep the UART
+// running continuously (looping TX data back to RX).
+//
+//*****************************************************************************
+void
+UART1IntHandler(void)
+{
+ uint32_t ui32Status;
+ uint32_t ui32Mode;
+
+ //
+ // Read the interrupt status of the UART.
+ //
+ ui32Status = ROM_UARTIntStatus(UART1_BASE, 1);
+
+ //
+ // Clear any pending status, even though there should be none since no UART
+ // interrupts were enabled. If UART error interrupts were enabled, then
+ // those interrupts could occur here and should be handled. Since uDMA is
+ // used for both the RX and TX, then neither of those interrupts should be
+ // enabled.
+ //
+ ROM_UARTIntClear(UART1_BASE, ui32Status);
+
+ //
+ // Check the DMA control table to see if the ping-pong "A" transfer is
+ // complete. The "A" transfer uses receive buffer "A", and the primary
+ // control structure.
+ //
+ ui32Mode = ROM_uDMAChannelModeGet(UDMA_CHANNEL_UART1RX | UDMA_PRI_SELECT);
+
+ //
+ // If the primary control structure indicates stop, that means the "A"
+ // receive buffer is done. The uDMA controller should still be receiving
+ // data into the "B" buffer.
+ //
+ if(ui32Mode == UDMA_MODE_STOP)
+ {
+ //
+ // Increment a counter to indicate data was received into buffer A. In
+ // a real application this would be used to signal the main thread that
+ // data was received so the main thread can process the data.
+ //
+ g_ui32RxBufACount++;
+
+ //
+ // Set up the next transfer for the "A" buffer, using the primary
+ // control structure. When the ongoing receive into the "B" buffer is
+ // done, the uDMA controller will switch back to this one. This
+ // example re-uses buffer A, but a more sophisticated application could
+ // use a rotating set of buffers to increase the amount of time that
+ // the main thread has to process the data in the buffer before it is
+ // reused.
+ //
+ ROM_uDMAChannelTransferSet(UDMA_CHANNEL_UART1RX | UDMA_PRI_SELECT,
+ UDMA_MODE_PINGPONG,
+ (void *)(UART1_BASE + UART_O_DR),
+ g_ui8RxBufA, sizeof(g_ui8RxBufA));
+ }
+
+ //
+ // Check the DMA control table to see if the ping-pong "B" transfer is
+ // complete. The "B" transfer uses receive buffer "B", and the alternate
+ // control structure.
+ //
+ ui32Mode = ROM_uDMAChannelModeGet(UDMA_CHANNEL_UART1RX | UDMA_ALT_SELECT);
+
+ //
+ // If the alternate control structure indicates stop, that means the "B"
+ // receive buffer is done. The uDMA controller should still be receiving
+ // data into the "A" buffer.
+ //
+ if(ui32Mode == UDMA_MODE_STOP)
+ {
+ //
+ // Increment a counter to indicate data was received into buffer A. In
+ // a real application this would be used to signal the main thread that
+ // data was received so the main thread can process the data.
+ //
+ g_ui32RxBufBCount++;
+
+ //
+ // Set up the next transfer for the "B" buffer, using the alternate
+ // control structure. When the ongoing receive into the "A" buffer is
+ // done, the uDMA controller will switch back to this one. This
+ // example re-uses buffer B, but a more sophisticated application could
+ // use a rotating set of buffers to increase the amount of time that
+ // the main thread has to process the data in the buffer before it is
+ // reused.
+ //
+ ROM_uDMAChannelTransferSet(UDMA_CHANNEL_UART1RX | UDMA_ALT_SELECT,
+ UDMA_MODE_PINGPONG,
+ (void *)(UART1_BASE + UART_O_DR),
+ g_ui8RxBufB, sizeof(g_ui8RxBufB));
+ }
+
+ //
+ // If the UART1 DMA TX channel is disabled, that means the TX DMA transfer
+ // is done.
+ //
+ if(!ROM_uDMAChannelIsEnabled(UDMA_CHANNEL_UART1TX))
+ {
+ //
+ // Start another DMA transfer to UART1 TX.
+ //
+ ROM_uDMAChannelTransferSet(UDMA_CHANNEL_UART1TX | UDMA_PRI_SELECT,
+ UDMA_MODE_BASIC, g_ui8TxBuf,
+ (void *)(UART1_BASE + UART_O_DR),
+ sizeof(g_ui8TxBuf));
+
+ //
+ // The uDMA TX channel must be re-enabled.
+ //
+ ROM_uDMAChannelEnable(UDMA_CHANNEL_UART1TX);
+ }
+}
+
+//*****************************************************************************
+//
+// Initializes the UART1 peripheral and sets up the TX and RX uDMA channels.
+// The UART is configured for loopback mode so that any data sent on TX will be
+// received on RX. The uDMA channels are configured so that the TX channel
+// will copy data from a buffer to the UART TX output. And the uDMA RX channel
+// will receive any incoming data into a pair of buffers in ping-pong mode.
+//
+//*****************************************************************************
+void
+InitUART1Transfer(void)
+{
+ unsigned int uIdx;
+
+ //
+ // Fill the TX buffer with a simple data pattern.
+ //
+ for(uIdx = 0; uIdx < UART_TXBUF_SIZE; uIdx++)
+ {
+ g_ui8TxBuf[uIdx] = uIdx;
+ }
+
+ //
+ // Enable the UART peripheral, and configure it to operate even if the CPU
+ // is in sleep.
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_UART1);
+ ROM_SysCtlPeripheralSleepEnable(SYSCTL_PERIPH_UART1);
+
+ //
+ // Configure the UART communication parameters.
+ //
+ ROM_UARTConfigSetExpClk(UART1_BASE, ROM_SysCtlClockGet(), 115200,
+ UART_CONFIG_WLEN_8 | UART_CONFIG_STOP_ONE |
+ UART_CONFIG_PAR_NONE);
+
+ //
+ // Set both the TX and RX trigger thresholds to 4. This will be used by
+ // the uDMA controller to signal when more data should be transferred. The
+ // uDMA TX and RX channels will be configured so that it can transfer 4
+ // bytes in a burst when the UART is ready to transfer more data.
+ //
+ ROM_UARTFIFOLevelSet(UART1_BASE, UART_FIFO_TX4_8, UART_FIFO_RX4_8);
+
+ //
+ // Enable the UART for operation, and enable the uDMA interface for both TX
+ // and RX channels.
+ //
+ ROM_UARTEnable(UART1_BASE);
+ ROM_UARTDMAEnable(UART1_BASE, UART_DMA_RX | UART_DMA_TX);
+
+ //
+ // This register write will set the UART to operate in loopback mode. Any
+ // data sent on the TX output will be received on the RX input.
+ //
+ HWREG(UART1_BASE + UART_O_CTL) |= UART_CTL_LBE;
+
+ //
+ // Enable the UART peripheral interrupts. Note that no UART interrupts
+ // were enabled, but the uDMA controller will cause an interrupt on the
+ // UART interrupt signal when a uDMA transfer is complete.
+ //
+ ROM_IntEnable(INT_UART1);
+
+ //
+ // Put the attributes in a known state for the uDMA UART1RX channel. These
+ // should already be disabled by default.
+ //
+ ROM_uDMAChannelAttributeDisable(UDMA_CHANNEL_UART1RX,
+ UDMA_ATTR_ALTSELECT | UDMA_ATTR_USEBURST |
+ UDMA_ATTR_HIGH_PRIORITY |
+ UDMA_ATTR_REQMASK);
+
+ //
+ // Configure the control parameters for the primary control structure for
+ // the UART RX channel. The primary contol structure is used for the "A"
+ // part of the ping-pong receive. The transfer data size is 8 bits, the
+ // source address does not increment since it will be reading from a
+ // register. The destination address increment is byte 8-bit bytes. The
+ // arbitration size is set to 4 to match the RX FIFO trigger threshold.
+ // The uDMA controller will use a 4 byte burst transfer if possible. This
+ // will be somewhat more effecient that single byte transfers.
+ //
+ ROM_uDMAChannelControlSet(UDMA_CHANNEL_UART1RX | UDMA_PRI_SELECT,
+ UDMA_SIZE_8 | UDMA_SRC_INC_NONE | UDMA_DST_INC_8 |
+ UDMA_ARB_4);
+
+ //
+ // Configure the control parameters for the alternate control structure for
+ // the UART RX channel. The alternate contol structure is used for the "B"
+ // part of the ping-pong receive. The configuration is identical to the
+ // primary/A control structure.
+ //
+ ROM_uDMAChannelControlSet(UDMA_CHANNEL_UART1RX | UDMA_ALT_SELECT,
+ UDMA_SIZE_8 | UDMA_SRC_INC_NONE | UDMA_DST_INC_8 |
+ UDMA_ARB_4);
+
+ //
+ // Set up the transfer parameters for the UART RX primary control
+ // structure. The mode is set to ping-pong, the transfer source is the
+ // UART data register, and the destination is the receive "A" buffer. The
+ // transfer size is set to match the size of the buffer.
+ //
+ ROM_uDMAChannelTransferSet(UDMA_CHANNEL_UART1RX | UDMA_PRI_SELECT,
+ UDMA_MODE_PINGPONG,
+ (void *)(UART1_BASE + UART_O_DR),
+ g_ui8RxBufA, sizeof(g_ui8RxBufA));
+
+ //
+ // Set up the transfer parameters for the UART RX alternate control
+ // structure. The mode is set to ping-pong, the transfer source is the
+ // UART data register, and the destination is the receive "B" buffer. The
+ // transfer size is set to match the size of the buffer.
+ //
+ ROM_uDMAChannelTransferSet(UDMA_CHANNEL_UART1RX | UDMA_ALT_SELECT,
+ UDMA_MODE_PINGPONG,
+ (void *)(UART1_BASE + UART_O_DR),
+ g_ui8RxBufB, sizeof(g_ui8RxBufB));
+
+ //
+ // Put the attributes in a known state for the uDMA UART1TX channel. These
+ // should already be disabled by default.
+ //
+ ROM_uDMAChannelAttributeDisable(UDMA_CHANNEL_UART1TX,
+ UDMA_ATTR_ALTSELECT |
+ UDMA_ATTR_HIGH_PRIORITY |
+ UDMA_ATTR_REQMASK);
+
+ //
+ // Set the USEBURST attribute for the uDMA UART TX channel. This will
+ // force the controller to always use a burst when transferring data from
+ // the TX buffer to the UART. This is somewhat more effecient bus usage
+ // than the default which allows single or burst transfers.
+ //
+ ROM_uDMAChannelAttributeEnable(UDMA_CHANNEL_UART1TX, UDMA_ATTR_USEBURST);
+
+ //
+ // Configure the control parameters for the UART TX. The uDMA UART TX
+ // channel is used to transfer a block of data from a buffer to the UART.
+ // The data size is 8 bits. The source address increment is 8-bit bytes
+ // since the data is coming from a buffer. The destination increment is
+ // none since the data is to be written to the UART data register. The
+ // arbitration size is set to 4, which matches the UART TX FIFO trigger
+ // threshold.
+ //
+ ROM_uDMAChannelControlSet(UDMA_CHANNEL_UART1TX | UDMA_PRI_SELECT,
+ UDMA_SIZE_8 | UDMA_SRC_INC_8 | UDMA_DST_INC_NONE |
+ UDMA_ARB_4);
+
+ //
+ // Set up the transfer parameters for the uDMA UART TX channel. This will
+ // configure the transfer source and destination and the transfer size.
+ // Basic mode is used because the peripheral is making the uDMA transfer
+ // request. The source is the TX buffer and the destination is the UART
+ // data register.
+ //
+ ROM_uDMAChannelTransferSet(UDMA_CHANNEL_UART1TX | UDMA_PRI_SELECT,
+ UDMA_MODE_BASIC, g_ui8TxBuf,
+ (void *)(UART1_BASE + UART_O_DR),
+ sizeof(g_ui8TxBuf));
+
+ //
+ // Now both the uDMA UART TX and RX channels are primed to start a
+ // transfer. As soon as the channels are enabled, the peripheral will
+ // issue a transfer request and the data transfers will begin.
+ //
+ ROM_uDMAChannelEnable(UDMA_CHANNEL_UART1RX);
+ ROM_uDMAChannelEnable(UDMA_CHANNEL_UART1TX);
+}
+
+//*****************************************************************************
+//
+// Initializes the uDMA software channel to perform a memory to memory uDMA
+// transfer.
+//
+//*****************************************************************************
+void
+InitSWTransfer(void)
+{
+ unsigned int uIdx;
+
+ //
+ // Fill the source memory buffer with a simple incrementing pattern.
+ //
+ for(uIdx = 0; uIdx < MEM_BUFFER_SIZE; uIdx++)
+ {
+ g_ui32SrcBuf[uIdx] = uIdx;
+ }
+
+ //
+ // Enable interrupts from the uDMA software channel.
+ //
+ ROM_IntEnable(INT_UDMA);
+
+ //
+ // Put the attributes in a known state for the uDMA software channel.
+ // These should already be disabled by default.
+ //
+ ROM_uDMAChannelAttributeDisable(UDMA_CHANNEL_SW,
+ UDMA_ATTR_USEBURST | UDMA_ATTR_ALTSELECT |
+ (UDMA_ATTR_HIGH_PRIORITY |
+ UDMA_ATTR_REQMASK));
+
+ //
+ // Configure the control parameters for the SW channel. The SW channel
+ // will be used to transfer between two memory buffers, 32 bits at a time.
+ // Therefore the data size is 32 bits, and the address increment is 32 bits
+ // for both source and destination. The arbitration size will be set to 8,
+ // which causes the uDMA controller to rearbitrate after 8 items are
+ // transferred. This keeps this channel from hogging the uDMA controller
+ // once the transfer is started, and allows other channels cycles if they
+ // are higher priority.
+ //
+ ROM_uDMAChannelControlSet(UDMA_CHANNEL_SW | UDMA_PRI_SELECT,
+ UDMA_SIZE_32 | UDMA_SRC_INC_32 | UDMA_DST_INC_32 |
+ UDMA_ARB_8);
+
+ //
+ // Set up the transfer parameters for the software channel. This will
+ // configure the transfer buffers and the transfer size. Auto mode must be
+ // used for software transfers.
+ //
+ ROM_uDMAChannelTransferSet(UDMA_CHANNEL_SW | UDMA_PRI_SELECT,
+ UDMA_MODE_AUTO, g_ui32SrcBuf, g_ui32DstBuf,
+ MEM_BUFFER_SIZE);
+
+ //
+ // Now the software channel is primed to start a transfer. The channel
+ // must be enabled. For software based transfers, a request must be
+ // issued. After this, the uDMA memory transfer begins.
+ //
+ ROM_uDMAChannelEnable(UDMA_CHANNEL_SW);
+ ROM_uDMAChannelRequest(UDMA_CHANNEL_SW);
+}
+
+//*****************************************************************************
+//
+// Configure the UART and its pins. This must be called before UARTprintf().
+//
+//*****************************************************************************
+void
+ConfigureUART(void)
+{
+ //
+ // Enable the GPIO Peripheral used by the UART.
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOA);
+
+ //
+ // Enable UART0
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_UART0);
+ ROM_SysCtlPeripheralSleepEnable(SYSCTL_PERIPH_UART0);
+
+ //
+ // Configure GPIO Pins for UART mode.
+ //
+ ROM_GPIOPinConfigure(GPIO_PA0_U0RX);
+ ROM_GPIOPinConfigure(GPIO_PA1_U0TX);
+ ROM_GPIOPinTypeUART(GPIO_PORTA_BASE, GPIO_PIN_0 | GPIO_PIN_1);
+
+ //
+ // Use the internal 16MHz oscillator as the UART clock source.
+ //
+ UARTClockSourceSet(UART0_BASE, UART_CLOCK_PIOSC);
+
+ //
+ // Initialize the UART for console I/O.
+ //
+ UARTStdioConfig(0, 115200, 16000000);
+}
+
+//*****************************************************************************
+//
+// This example demonstrates how to use the uDMA controller to transfer data
+// between memory buffers and to and from a peripheral, in this case a UART.
+// The uDMA controller is configured to repeatedly transfer a block of data
+// from one memory buffer to another. It is also set up to repeatedly copy a
+// block of data from a buffer to the UART output. The UART data is looped
+// back so the same data is received, and the uDMA controlled is configured to
+// continuously receive the UART data using ping-pong buffers.
+//
+// The processor is put to sleep when it is not doing anything, and this allows
+// collection of CPU usage data to see how much CPU is being used while the
+// data transfers are ongoing.
+//
+//*****************************************************************************
+int
+main(void)
+{
+ static uint32_t ui32PrevSeconds;
+ static uint32_t ui32PrevXferCount;
+ static uint32_t ui32PrevUARTCount = 0;
+ uint32_t ui32XfersCompleted;
+ uint32_t ui32BytesTransferred;
+
+ //
+ // Enable lazy stacking for interrupt handlers. This allows floating-point
+ // instructions to be used within interrupt handlers, but at the expense of
+ // extra stack usage.
+ //
+ ROM_FPULazyStackingEnable();
+
+ //
+ // Set the clocking to run from the PLL at 50 MHz.
+ //
+ ROM_SysCtlClockSet(SYSCTL_SYSDIV_4 | SYSCTL_USE_PLL | SYSCTL_OSC_MAIN |
+ SYSCTL_XTAL_16MHZ);
+
+ //
+ // Enable peripherals to operate when CPU is in sleep.
+ //
+ ROM_SysCtlPeripheralClockGating(true);
+
+ //
+ // Enable the GPIO port that is used for the on-board LED.
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOF);
+
+ //
+ // Enable the GPIO pins for the LED (PF2).
+ //
+ ROM_GPIOPinTypeGPIOOutput(GPIO_PORTF_BASE, GPIO_PIN_2);
+
+ //
+ // Initialize the UART.
+ //
+ ConfigureUART();
+
+ UARTprintf("\033[2JuDMA Example\n");
+
+ //
+ // Show the clock frequency on the display.
+ //
+ UARTprintf("Tiva C Series @ %u MHz\n\n", ROM_SysCtlClockGet() / 1000000);
+
+ //
+ // Show statistics headings.
+ //
+ UARTprintf("CPU Memory UART Remaining\n");
+ UARTprintf("Usage Transfers Transfers Time\n");
+
+ //
+ // Configure SysTick to occur 100 times per second, to use as a time
+ // reference. Enable SysTick to generate interrupts.
+ //
+ ROM_SysTickPeriodSet(ROM_SysCtlClockGet() / SYSTICKS_PER_SECOND);
+ ROM_SysTickIntEnable();
+ ROM_SysTickEnable();
+
+ //
+ // Initialize the CPU usage measurement routine.
+ //
+ CPUUsageInit(ROM_SysCtlClockGet(), SYSTICKS_PER_SECOND, 2);
+
+ //
+ // Enable the uDMA controller at the system level. Enable it to continue
+ // to run while the processor is in sleep.
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_UDMA);
+ ROM_SysCtlPeripheralSleepEnable(SYSCTL_PERIPH_UDMA);
+
+ //
+ // Enable the uDMA controller error interrupt. This interrupt will occur
+ // if there is a bus error during a transfer.
+ //
+ ROM_IntEnable(INT_UDMAERR);
+
+ //
+ // Enable the uDMA controller.
+ //
+ ROM_uDMAEnable();
+
+ //
+ // Point at the control table to use for channel control structures.
+ //
+ ROM_uDMAControlBaseSet(ui8ControlTable);
+
+ //
+ // Initialize the uDMA memory to memory transfers.
+ //
+ InitSWTransfer();
+
+ //
+ // Initialize the uDMA UART transfers.
+ //
+ InitUART1Transfer();
+
+ //
+ // Remember the current SysTick seconds count.
+ //
+ ui32PrevSeconds = g_ui32Seconds;
+
+ //
+ // Remember the current count of memory buffer transfers.
+ //
+ ui32PrevXferCount = g_ui32MemXferCount;
+
+ //
+ // Loop until the button is pressed. The processor is put to sleep
+ // in this loop so that CPU utilization can be measured.
+ //
+ while(1)
+ {
+ //
+ // Check to see if one second has elapsed. If so, the make some
+ // updates.
+ //
+ if(g_ui32Seconds != ui32PrevSeconds)
+ {
+ //
+ // Turn on the LED as a heartbeat
+ //
+ GPIOPinWrite(GPIO_PORTF_BASE, GPIO_PIN_2, GPIO_PIN_2);
+
+ //
+ // Print a message to the display showing the CPU usage percent.
+ // The fractional part of the percent value is ignored.
+ //
+ UARTprintf("\r%3d%% ", g_ui32CPUUsage >> 16);
+
+ //
+ // Remember the new seconds count.
+ //
+ ui32PrevSeconds = g_ui32Seconds;
+
+ //
+ // Calculate how many memory transfers have occurred since the last
+ // second.
+ //
+ ui32XfersCompleted = g_ui32MemXferCount - ui32PrevXferCount;
+
+ //
+ // Remember the new transfer count.
+ //
+ ui32PrevXferCount = g_ui32MemXferCount;
+
+ //
+ // Compute how many bytes were transferred in the memory transfer
+ // since the last second.
+ //
+ ui32BytesTransferred = ui32XfersCompleted * MEM_BUFFER_SIZE * 4;
+
+ //
+ // Print a message showing the memory transfer rate.
+ //
+ if(ui32BytesTransferred >= 100000000)
+ {
+ UARTprintf("%3d MB/s ", ui32BytesTransferred / 1000000);
+ }
+ else if(ui32BytesTransferred >= 10000000)
+ {
+ UARTprintf("%2d.%01d MB/s ", ui32BytesTransferred / 1000000,
+ (ui32BytesTransferred % 1000000) / 100000);
+ }
+ else if(ui32BytesTransferred >= 1000000)
+ {
+ UARTprintf("%1d.%02d MB/s ", ui32BytesTransferred / 1000000,
+ (ui32BytesTransferred % 1000000) / 10000);
+ }
+ else if(ui32BytesTransferred >= 100000)
+ {
+ UARTprintf("%3d KB/s ", ui32BytesTransferred / 1000);
+ }
+ else if(ui32BytesTransferred >= 10000)
+ {
+ UARTprintf("%2d.%01d KB/s ", ui32BytesTransferred / 1000,
+ (ui32BytesTransferred % 1000) / 100);
+ }
+ else if(ui32BytesTransferred >= 1000)
+ {
+ UARTprintf("%1d.%02d KB/s ", ui32BytesTransferred / 1000,
+ (ui32BytesTransferred % 1000) / 10);
+ }
+ else if(ui32BytesTransferred >= 100)
+ {
+ UARTprintf("%3d B/s ", ui32BytesTransferred);
+ }
+ else if(ui32BytesTransferred >= 10)
+ {
+ UARTprintf("%2d B/s ", ui32BytesTransferred);
+ }
+ else
+ {
+ UARTprintf("%1d B/s ", ui32BytesTransferred);
+ }
+
+ //
+ // Calculate how many UART transfers have occurred since the last
+ // second.
+ //
+ ui32XfersCompleted = (g_ui32RxBufACount + g_ui32RxBufBCount -
+ ui32PrevUARTCount);
+
+ //
+ // Remember the new UART transfer count.
+ //
+ ui32PrevUARTCount = g_ui32RxBufACount + g_ui32RxBufBCount;
+
+ //
+ // Compute how many bytes were transferred by the UART. The number
+ // of bytes received is multiplied by 2 so that the TX bytes
+ // transferred are also accounted for.
+ //
+ ui32BytesTransferred = ui32XfersCompleted * UART_RXBUF_SIZE * 2;
+
+ //
+ // Print a message showing the UART transfer rate.
+ //
+ if(ui32BytesTransferred >= 1000000)
+ {
+ UARTprintf("%1d.%02d MB/s ", ui32BytesTransferred / 1000000,
+ (ui32BytesTransferred % 1000000) / 10000);
+ }
+ else if(ui32BytesTransferred >= 100000)
+ {
+ UARTprintf("%3d KB/s ", ui32BytesTransferred / 1000);
+ }
+ else if(ui32BytesTransferred >= 10000)
+ {
+ UARTprintf("%2d.%01d KB/s ", ui32BytesTransferred / 1000,
+ (ui32BytesTransferred % 1000) / 100);
+ }
+ else if(ui32BytesTransferred >= 1000)
+ {
+ UARTprintf("%1d.%02d KB/s ", ui32BytesTransferred / 1000,
+ (ui32BytesTransferred % 1000) / 10);
+ }
+ else if(ui32BytesTransferred >= 100)
+ {
+ UARTprintf("%3d B/s ", ui32BytesTransferred);
+ }
+ else if(ui32BytesTransferred >= 10)
+ {
+ UARTprintf("%2d B/s ", ui32BytesTransferred);
+ }
+ else
+ {
+ UARTprintf("%1d B/s ", ui32BytesTransferred);
+ }
+
+ //
+ // Print a spinning line to make it more apparent that there is
+ // something happening.
+ //
+ UARTprintf("%2ds", 10 - ui32PrevSeconds);
+
+ //
+ // Turn off the LED.
+ //
+ GPIOPinWrite(GPIO_PORTF_BASE, GPIO_PIN_2, 0);
+ }
+
+ //
+ // Put the processor to sleep if there is nothing to do. This allows
+ // the CPU usage routine to measure the number of free CPU cycles.
+ // If the processor is sleeping a lot, it can be hard to connect to
+ // the target with the debugger.
+ //
+ ROM_SysCtlSleep();
+
+ //
+ // See if we have run int32_t enough and exit the loop if so.
+ //
+ if(g_ui32Seconds >= 10)
+ {
+ break;
+ }
+ }
+
+ //
+ // Indicate on the display that the example is stopped.
+ //
+ UARTprintf("\nStopped\n");
+
+ //
+ // Loop forever with the CPU not sleeping, so the debugger can connect.
+ //
+ while(1)
+ {
+ //
+ // Turn on the GREEN LED.
+ //
+ GPIOPinWrite(GPIO_PORTF_BASE, GPIO_PIN_2, GPIO_PIN_2);
+
+ //
+ // Delay for a bit.
+ //
+ SysCtlDelay(SysCtlClockGet() / 20 / 3);
+
+ //
+ // Turn off the GREEN LED.
+ //
+ GPIOPinWrite(GPIO_PORTF_BASE, GPIO_PIN_2, 0);
+
+ //
+ // Delay for a bit.
+ //
+ SysCtlDelay(SysCtlClockGet() / 20 / 3);
+
+ }
+}
diff --git a/boards/ek-tm4c123gxl/udma_demo/udma_demo.ewd b/boards/ek-tm4c123gxl/udma_demo/udma_demo.ewd new file mode 100644 index 0000000..7a32408 --- /dev/null +++ b/boards/ek-tm4c123gxl/udma_demo/udma_demo.ewd @@ -0,0 +1,614 @@ +<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+ <fileVersion>1</fileVersion>
+ <configuration>
+ <name>Debug</name>
+ <toolchain>
+ <name>ARM</name>
+ </toolchain>
+ <debug>1</debug>
+ <settings>
+ <name>C-SPY</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>15</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CInput</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CEndian</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCVariant</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>MemOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MemFile</name>
+ <state>$TOOLKIT_DIR$\CONFIG\debugger\TexasInstruments\tm4c123gh6pm</state>
+ </option>
+ <option>
+ <name>RunToEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>RunToName</name>
+ <state>main</state>
+ </option>
+ <option>
+ <name>CExtraOptionsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCDDFArgumentProducer</name>
+ <state></state>
+ </option>
+ <option>
+ <name>OCDownloadSuppressDownload</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDownloadVerifyAll</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OCDynDriverList</name>
+ <state>LMIFTDI_ID</state>
+ </option>
+ <option>
+ <name>OCLastSavedByProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OCDownloadAttachToProgram</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FlashLoaders</name>
+ <state>,,,,(default),</state>
+ </option>
+ <option>
+ <name>UseFlashLoader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CLowLevel</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCBE8Slave</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ARMSIM_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCSimDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCSimEnablePSP</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCSimPspOverrideConfig</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCSimPspConfigFile</name>
+ <state></state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ANGEL_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CCAngelHeartbeat</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CAngelCommunication</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CAngelCommBaud</name>
+ <version>0</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>CAngelCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ANGELTCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoAngelLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AngelLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>GDBSERVER_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>TCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>LogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCJTagBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>IARROM_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CRomLogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomLogFileEditB</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CRomCommunication</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomCommBaud</name>
+ <version>0</version>
+ <state>7</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>JLINK_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>9</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>JLinkSpeed</name>
+ <state>32</state>
+ </option>
+ <option>
+ <name>CCJLinkDoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCJLinkHWResetDelay</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>JLinkInitialSpeed</name>
+ <state>32</state>
+ </option>
+ <option>
+ <name>CCDoJlinkMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCScanChainNonARMDevices</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkIRLength</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkCommRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkTCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>CCJLinkSpeedRadioV2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCUSBDevice</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchUndef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchSWI</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchData</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchPrefetch</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchIRQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchFIQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ <option>
+ <name>CCJLinkInterfaceRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCJLinkAttachSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCJLinkResetList</name>
+ <version>0</version>
+ <state>5</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>LMIFTDI_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>LmiftdiSpeed</name>
+ <state>500</state>
+ </option>
+ <option>
+ <name>CCLmiftdiDoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCLmiftdiLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>MACRAIGOR_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>2</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>jtag</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>EmuSpeed</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>TCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>LogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>DoEmuMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>EmuMultiTarget</name>
+ <state>0@ARM7TDMI</state>
+ </option>
+ <option>
+ <name>EmuHWReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CEmuCommBaud</name>
+ <version>0</version>
+ <state>4</state>
+ </option>
+ <option>
+ <name>CEmuCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>jtago</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>UnusedAddr</name>
+ <state>0x00800000</state>
+ </option>
+ <option>
+ <name>CCMacraigorHWResetDelay</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCJTagBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>RDI_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CRDIDriverDll</name>
+ <state>Browse to your RDI driver</state>
+ </option>
+ <option>
+ <name>CRDILogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRDILogFileEdit</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCRDIHWReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchUndef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchSWI</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchData</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchPrefetch</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchIRQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchFIQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDIUseETM</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>THIRDPARTY_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CThirdPartyDriverDll</name>
+ <state>Browse to your third-party driver</state>
+ </option>
+ <option>
+ <name>CThirdPartyLogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CThirdPartyLogFileEditB</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <debuggerPlugins>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\OSE\OseEpsilonPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Profiling\Profiling.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ </debuggerPlugins>
+ </configuration>
+</project>
diff --git a/boards/ek-tm4c123gxl/udma_demo/udma_demo.ewp b/boards/ek-tm4c123gxl/udma_demo/udma_demo.ewp new file mode 100644 index 0000000..211faf1 --- /dev/null +++ b/boards/ek-tm4c123gxl/udma_demo/udma_demo.ewp @@ -0,0 +1,793 @@ +<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+ <fileVersion>1</fileVersion>
+ <configuration>
+ <name>Debug</name>
+ <toolchain>
+ <name>ARM</name>
+ </toolchain>
+ <debug>1</debug>
+ <settings>
+ <name>General</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <version>14</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>ExePath</name>
+ <state>ewarm\Exe</state>
+ </option>
+ <option>
+ <name>ObjPath</name>
+ <state>ewarm\Obj</state>
+ </option>
+ <option>
+ <name>ListPath</name>
+ <state>ewarm\List</state>
+ </option>
+ <option>
+ <name>Variant</name>
+ <version>19</version>
+ <state>39</state>
+ </option>
+ <option>
+ <name>GEndianMode</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>Input variant</name>
+ <version>1</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>Input description</name>
+ <state>No specifier n, no float nor long long, no scan set, no assignment suppressing.</state>
+ </option>
+ <option>
+ <name>Output variant</name>
+ <version>0</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>Output description</name>
+ <state>No specifier a, A, no specifier n, no float nor long long, no flags.</state>
+ </option>
+ <option>
+ <name>GOutputBinary</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FPU</name>
+ <version>2</version>
+ <state>5</state>
+ </option>
+ <option>
+ <name>OGCoreOrChip</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelect</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelectSlave</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>RTDescription</name>
+ <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+ </option>
+ <option>
+ <name>RTConfigPath</name>
+ <state>$TOOLKIT_DIR$\INC\DLib_Config_Normal.h</state>
+ </option>
+ <option>
+ <name>OGProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OGLastSavedByProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>GeneralMisraRules</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>GeneralEnableMisra</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GeneralMisraVerbose</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGChipSelectEditMenu</name>
+ <state>TM4C123GH6PM TexasInstruments TM4C123GH6PM</state>
+ </option>
+ <option>
+ <name>GenLowLevelInterface</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GEndianModeBE</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OGBufferedTerminalOutput</name>
+ <state>0</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ICCARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>19</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CCDefines</name>
+ <state>ewarm</state>
+ <state>PART_TM4C123GH6PM</state>
+ <state>TARGET_IS_TM4C123_RB1</state>
+ </option>
+ <option>
+ <name>CCPreprocFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocComments</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMnemonics</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMessages</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssSource</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagSuppress</name>
+ <state>Pa050</state>
+ </option>
+ <option>
+ <name>CCDiagRemark</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCDiagWarning</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCDiagError</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCAllowList</name>
+ <version>1</version>
+ <state>1111111</state>
+ </option>
+ <option>
+ <name>CCDebugInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IEndianMode</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IExtraOptionsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCLangConformance</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCSignedPlainChar</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCRequirePrototypes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagWarnAreErr</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCCompilerRuntimeInfo</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OutputFile</name>
+ <state>$FILE_BNAME$.o</state>
+ </option>
+ <option>
+ <name>CCLangSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCLibConfigHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>PreInclude</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CompilerMisraRules</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>CompilerMisraOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCIncludePath2</name>
+ <state>$PROJ_DIR$\..\..\..\..</state>
+ </option>
+ <option>
+ <name>CCStdIncCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCStdIncludePath</name>
+ <state>$TOOLKIT_DIR$\INC\</state>
+ </option>
+ <option>
+ <name>CCCodeSection</name>
+ <state>.text</state>
+ </option>
+ <option>
+ <name>IInterwork2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IProcessorMode2</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptLevel</name>
+ <state>3</state>
+ </option>
+ <option>
+ <name>CCOptStrategy</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptLevelSlave</name>
+ <state>3</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>AARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>7</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>AObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AEndian</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>ACaseSensitivity</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacroChars</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnEnable</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnWhat</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnOne</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AWarnRange1</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AWarnRange2</name>
+ <state></state>
+ </option>
+ <option>
+ <name>ADebug</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AltRegisterNames</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ADefines</name>
+ <state>ewarm</state>
+ </option>
+ <option>
+ <name>AList</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AListHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AListing</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>Includes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacDefs</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacExps</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacExec</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OnlyAssed</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MultiLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLengthCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLength</name>
+ <state>80</state>
+ </option>
+ <option>
+ <name>TabSpacing</name>
+ <state>8</state>
+ </option>
+ <option>
+ <name>AXRef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDefines</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefInternal</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDual</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AOutputFile</name>
+ <state>$FILE_BNAME$.o</state>
+ </option>
+ <option>
+ <name>AMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ALimitErrorsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ALimitErrorsEdit</name>
+ <state>100</state>
+ </option>
+ <option>
+ <name>AIgnoreStdInclude</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AStdIncludes</name>
+ <state>$TOOLKIT_DIR$\INC\</state>
+ </option>
+ <option>
+ <name>AUserIncludes</name>
+ <state>$PROJ_DIR$\..\..\..\..</state>
+ </option>
+ <option>
+ <name>AExtraOptionsCheckV2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AExtraOptionsV2</name>
+ <state></state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>OBJCOPY</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OOCOutputFormat</name>
+ <version>1</version>
+ <state>2</state>
+ </option>
+ <option>
+ <name>OCOutputOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OOCOutputFile</name>
+ <state>udma_demo.bin</state>
+ </option>
+ <option>
+ <name>OOCCommandLineProducer</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OOCObjCopyEnable</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>CUSTOM</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <extensions></extensions>
+ <cmdline></cmdline>
+ </data>
+ </settings>
+ <settings>
+ <name>BICOMP</name>
+ <archiveVersion>0</archiveVersion>
+ <data/>
+ </settings>
+ <settings>
+ <name>BUILDACTION</name>
+ <archiveVersion>1</archiveVersion>
+ <data>
+ <prebuild></prebuild>
+ <postbuild></postbuild>
+ </data>
+ </settings>
+ <settings>
+ <name>ILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>5</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>IlinkLibIOConfig</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>XLinkMisraHandler</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkInputFileSlave</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkOutputFile</name>
+ <state>udma_demo.out</state>
+ </option>
+ <option>
+ <name>IlinkDebugInfoEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkKeepSymbols</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinaryFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinarySymbol</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinarySegment</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinaryAlign</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkDefines</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkConfigDefines</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkMapFile</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkLogFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogInitialization</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogModule</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogSection</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogVeneer</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkIcfOverride</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkIcfFile</name>
+ <state>$PROJ_DIR$\udma_demo.icf</state>
+ </option>
+ <option>
+ <name>IlinkIcfFileSlave</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkSuppressDiags</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsRem</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsWarn</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsErr</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkWarningsAreErrors</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkUseExtraOptions</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkLowLevelInterfaceSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAutoLibEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAdditionalLibs</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkOverrideProgramEntryLabel</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabelSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabel</name>
+ <state>__iar_program_start</state>
+ </option>
+ <option>
+ <name>IlinkNXPLPCChecksum</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>DoFill</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FillerByte</name>
+ <state>0xFF</state>
+ </option>
+ <option>
+ <name>FillerStart</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>FillerEnd</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>CrcSize</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcAlign</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcAlgo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcPoly</name>
+ <state>0x11021</state>
+ </option>
+ <option>
+ <name>CrcCompl</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcBitOrder</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcInitialValue</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>DoCrc</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkBE8Slave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkBufferedTerminalOutput</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>IARCHIVE</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>IarchiveInputs</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IarchiveOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IarchiveOutput</name>
+ <state>###Unitialized###</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>BILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data/>
+ </settings>
+ </configuration>
+ <group>
+ <name>Libraries</name>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\driverlib\ewarm\Exe\driverlib.a</name>
+ </file>
+ </group>
+ <group>
+ <name>Source</name>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\utils\cpu_usage.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\startup_ewarm.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\utils\uartstdio.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\udma_demo.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\utils\ustdlib.c</name>
+ </file>
+ </group>
+</project>
diff --git a/boards/ek-tm4c123gxl/udma_demo/udma_demo.icf b/boards/ek-tm4c123gxl/udma_demo/udma_demo.icf new file mode 100644 index 0000000..b694105 --- /dev/null +++ b/boards/ek-tm4c123gxl/udma_demo/udma_demo.icf @@ -0,0 +1,78 @@ +//*****************************************************************************
+//
+// udma_demo.icf - Linker configuration file for udma_demo.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+//
+// Define a memory region that covers the entire 4 GB addressible space of the
+// processor.
+//
+define memory mem with size = 4G;
+
+//
+// Define a region for the on-chip flash.
+//
+define region FLASH = mem:[from 0x00000000 to 0x0003ffff];
+
+//
+// Define a region for the on-chip SRAM.
+//
+define region SRAM = mem:[from 0x20000000 to 0x20007fff];
+
+//
+// Define a block for the heap. The size should be set to something other
+// than zero if things in the C library that require the heap are used.
+//
+define block HEAP with alignment = 8, size = 0x00000000 { };
+
+//
+// Indicate that the read/write values should be initialized by copying from
+// flash.
+//
+initialize by copy { readwrite };
+
+//
+// Indicate that the noinit values should be left alone. This includes the
+// stack, which if initialized will destroy the return address from the
+// initialization code, causing the processor to branch to zero and fault.
+//
+do not initialize { section .noinit };
+
+//
+// Place the interrupt vectors at the start of flash.
+//
+place at start of FLASH { readonly section .intvec };
+
+//
+// Place the remainder of the read-only items into flash.
+//
+place in FLASH { readonly };
+
+//
+// Place the RAM vector table at the start of SRAM.
+//
+place at start of SRAM { section VTABLE };
+
+//
+// Place all read/write items into SRAM.
+//
+place in SRAM { readwrite, block HEAP };
diff --git a/boards/ek-tm4c123gxl/udma_demo/udma_demo.ld b/boards/ek-tm4c123gxl/udma_demo/udma_demo.ld new file mode 100644 index 0000000..7090a23 --- /dev/null +++ b/boards/ek-tm4c123gxl/udma_demo/udma_demo.ld @@ -0,0 +1,57 @@ +/******************************************************************************
+ *
+ * udma_demo.ld - Linker configuration file for udma_demo.
+ *
+ * Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+ * Software License Agreement
+ *
+ * Texas Instruments (TI) is supplying this software for use solely and
+ * exclusively on TI's microcontroller products. The software is owned by
+ * TI and/or its suppliers, and is protected under applicable copyright
+ * laws. You may not combine this software with "viral" open-source
+ * software in order to form a larger program.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+ * NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+ * NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+ * CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+ * DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ * This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+ *
+ *****************************************************************************/
+
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x00040000
+ SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000
+}
+
+SECTIONS
+{
+ .text :
+ {
+ _text = .;
+ KEEP(*(.isr_vector))
+ *(.text*)
+ *(.rodata*)
+ _etext = .;
+ } > FLASH
+
+ .data : AT(ADDR(.text) + SIZEOF(.text))
+ {
+ _data = .;
+ *(vtable)
+ *(.data*)
+ _edata = .;
+ } > SRAM
+
+ .bss :
+ {
+ _bss = .;
+ *(.bss*)
+ *(COMMON)
+ _ebss = .;
+ } > SRAM
+}
diff --git a/boards/ek-tm4c123gxl/udma_demo/udma_demo.sct b/boards/ek-tm4c123gxl/udma_demo/udma_demo.sct new file mode 100644 index 0000000..d20b9de --- /dev/null +++ b/boards/ek-tm4c123gxl/udma_demo/udma_demo.sct @@ -0,0 +1,47 @@ +;******************************************************************************
+;
+; udma_demo.sct - Linker configuration file for udma_demo.
+;
+; Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+; Software License Agreement
+;
+; Texas Instruments (TI) is supplying this software for use solely and
+; exclusively on TI's microcontroller products. The software is owned by
+; TI and/or its suppliers, and is protected under applicable copyright
+; laws. You may not combine this software with "viral" open-source
+; software in order to form a larger program.
+;
+; THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+; NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+; NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+; A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+; CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+; DAMAGES, FOR ANY REASON WHATSOEVER.
+;
+; This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+;
+;******************************************************************************
+
+LR_IROM 0x00000000 0x00040000
+{
+ ;
+ ; Specify the Execution Address of the code and the size.
+ ;
+ ER_IROM 0x00000000 0x00040000
+ {
+ *.o (RESET, +First)
+ * (InRoot$$Sections, +RO)
+ }
+
+ ;
+ ; Specify the Execution Address of the data area.
+ ;
+ RW_IRAM 0x20000000 0x00008000
+ {
+ ;
+ ; Uncomment the following line in order to use IntRegister().
+ ;
+ ;* (vtable, +First)
+ * (+RW, +ZI)
+ }
+}
diff --git a/boards/ek-tm4c123gxl/udma_demo/udma_demo.uvopt b/boards/ek-tm4c123gxl/udma_demo/udma_demo.uvopt new file mode 100644 index 0000000..5947cc1 --- /dev/null +++ b/boards/ek-tm4c123gxl/udma_demo/udma_demo.uvopt @@ -0,0 +1,331 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+ <SchemaVersion>1.0</SchemaVersion>
+
+ <Header>### uVision Project, (C) Keil Software</Header>
+
+ <Extensions>
+ <cExt>*.c</cExt>
+ <aExt>*.s*; *.src; *.a*</aExt>
+ <oExt>*.obj</oExt>
+ <lExt>*.lib</lExt>
+ <tExt>*.txt; *.h; *.inc</tExt>
+ <pExt>*.plm</pExt>
+ <CppX>*.cpp</CppX>
+ </Extensions>
+
+ <DaveTm>
+ <dwLowDateTime>0</dwLowDateTime>
+ <dwHighDateTime>0</dwHighDateTime>
+ </DaveTm>
+
+ <Target>
+ <TargetName>udma_demo</TargetName>
+ <ToolsetNumber>0x4</ToolsetNumber>
+ <ToolsetName>ARM-ADS</ToolsetName>
+ <TargetOption>
+ <CLKADS>8000000</CLKADS>
+ <OPTTT>
+ <gFlags>1</gFlags>
+ <BeepAtEnd>1</BeepAtEnd>
+ <RunSim>1</RunSim>
+ <RunTarget>0</RunTarget>
+ </OPTTT>
+ <OPTHX>
+ <HexSelection>1</HexSelection>
+ <FlashByte>65535</FlashByte>
+ <HexRangeLowAddress>0</HexRangeLowAddress>
+ <HexRangeHighAddress>0</HexRangeHighAddress>
+ <HexOffset>0</HexOffset>
+ </OPTHX>
+ <OPTLEX>
+ <PageWidth>79</PageWidth>
+ <PageLength>66</PageLength>
+ <TabStop>8</TabStop>
+ <ListingPath>.\rvmdk\</ListingPath>
+ </OPTLEX>
+ <ListingPage>
+ <CreateCListing>1</CreateCListing>
+ <CreateAListing>1</CreateAListing>
+ <CreateLListing>1</CreateLListing>
+ <CreateIListing>0</CreateIListing>
+ <AsmCond>1</AsmCond>
+ <AsmSymb>1</AsmSymb>
+ <AsmXref>0</AsmXref>
+ <CCond>1</CCond>
+ <CCode>0</CCode>
+ <CListInc>0</CListInc>
+ <CSymb>0</CSymb>
+ <LinkerCodeListing>0</LinkerCodeListing>
+ </ListingPage>
+ <OPTXL>
+ <LMap>1</LMap>
+ <LComments>1</LComments>
+ <LGenerateSymbols>1</LGenerateSymbols>
+ <LLibSym>1</LLibSym>
+ <LLines>1</LLines>
+ <LLocSym>1</LLocSym>
+ <LPubSym>1</LPubSym>
+ <LXref>0</LXref>
+ <LExpSel>0</LExpSel>
+ </OPTXL>
+ <OPTFL>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <IsCurrentTarget>1</IsCurrentTarget>
+ </OPTFL>
+ <CpuCode>255</CpuCode>
+ <Books>
+ <Book>
+ <Number>0</Number>
+ <Title>Data Sheet</Title>
+ <Path>DATASHTS\Luminary\TM4C123GH6PM.PDF</Path>
+ </Book>
+ </Books>
+ <DllOpt>
+ <SimDllName>SARMCM3.DLL</SimDllName>
+ <SimDllArguments>-MPU</SimDllArguments>
+ <SimDlgDllName>DCM.DLL</SimDlgDllName>
+ <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+ <TargetDllName>SARMCM3.DLL</TargetDllName>
+ <TargetDllArguments>-MPU</TargetDllArguments>
+ <TargetDlgDllName>TCM.DLL</TargetDlgDllName>
+ <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+ </DllOpt>
+ <DebugOpt>
+ <uSim>0</uSim>
+ <uTrg>1</uTrg>
+ <sLdApp>1</sLdApp>
+ <sGomain>1</sGomain>
+ <sRbreak>1</sRbreak>
+ <sRwatch>1</sRwatch>
+ <sRmem>1</sRmem>
+ <sRfunc>1</sRfunc>
+ <sRbox>1</sRbox>
+ <tLdApp>1</tLdApp>
+ <tGomain>0</tGomain>
+ <tRbreak>1</tRbreak>
+ <tRwatch>1</tRwatch>
+ <tRmem>1</tRmem>
+ <tRfunc>0</tRfunc>
+ <tRbox>1</tRbox>
+ <sRunDeb>0</sRunDeb>
+ <sLrtime>0</sLrtime>
+ <nTsel>4</nTsel>
+ <sDll></sDll>
+ <sDllPa></sDllPa>
+ <sDlgDll></sDlgDll>
+ <sDlgPa></sDlgPa>
+ <sIfile></sIfile>
+ <tDll></tDll>
+ <tDllPa></tDllPa>
+ <tDlgDll></tDlgDll>
+ <tDlgPa></tDlgPa>
+ <tIfile></tIfile>
+ <pMon>BIN\lmidk-agdi.dll</pMon>
+ </DebugOpt>
+ <TargetDriverDllRegistry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>lmidk-agdi</Key>
+ <Name>-O4614 -S3 -FO29</Name>
+ </SetRegEntry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>DLGTARM</Key>
+ <Name></Name>
+ </SetRegEntry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>ARMDBGFLAGS</Key>
+ <Name></Name>
+ </SetRegEntry>
+ </TargetDriverDllRegistry>
+ <DebugFlag>
+ <trace>0</trace>
+ <periodic>1</periodic>
+ <aLwin>0</aLwin>
+ <aCover>0</aCover>
+ <aSer1>0</aSer1>
+ <aSer2>0</aSer2>
+ <aPa>0</aPa>
+ <viewmode>1</viewmode>
+ <vrSel>0</vrSel>
+ <aSym>0</aSym>
+ <aTbox>0</aTbox>
+ <AscS1>0</AscS1>
+ <AscS2>0</AscS2>
+ <AscS3>0</AscS3>
+ <aSer3>0</aSer3>
+ <eProf>0</eProf>
+ <aLa>0</aLa>
+ <aPa1>0</aPa1>
+ <AscS4>0</AscS4>
+ <aSer4>0</aSer4>
+ <StkLoc>0</StkLoc>
+ <TrcWin>0</TrcWin>
+ <newCpu>0</newCpu>
+ <uProt>0</uProt>
+ </DebugFlag>
+ <LintExecutable></LintExecutable>
+ <LintConfigFile></LintConfigFile>
+ </TargetOption>
+ </Target>
+
+ <Group>
+ <GroupName>Source</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>1</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\utils\cpu_usage.c</PathWithFileName>
+ <FilenameWithoutPath>cpu_usage.c</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>2</FileNumber>
+ <FileType>2</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\startup_rvmdk.S</PathWithFileName>
+ <FilenameWithoutPath>startup_rvmdk.S</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>3</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\utils\uartstdio.c</PathWithFileName>
+ <FilenameWithoutPath>uartstdio.c</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>4</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\udma_demo.c</PathWithFileName>
+ <FilenameWithoutPath>udma_demo.c</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>5</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\utils\ustdlib.c</PathWithFileName>
+ <FilenameWithoutPath>ustdlib.c</FilenameWithoutPath>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>Libraries</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>6</FileNumber>
+ <FileType>4</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\driverlib\rvmdk\driverlib.lib</PathWithFileName>
+ <FilenameWithoutPath>driverlib.lib</FilenameWithoutPath>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>Documentation</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>3</GroupNumber>
+ <FileNumber>7</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <Focus>1</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>1</TopLine>
+ <CurrentLine>1</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\readme.txt</PathWithFileName>
+ <FilenameWithoutPath>readme.txt</FilenameWithoutPath>
+ <WindowPosition>
+ <length>44</length>
+ <flags>0</flags>
+ <showCmd>1</showCmd>
+ <MinPosition>
+ <xPos>-1</xPos>
+ <yPos>-1</yPos>
+ </MinPosition>
+ <MaxPosition>
+ <xPos>-1</xPos>
+ <yPos>-1</yPos>
+ </MaxPosition>
+ <NormalPosition>
+ <Top>0</Top>
+ <Left>0</Left>
+ <Right>729</Right>
+ <Bottom>300</Bottom>
+ </NormalPosition>
+ </WindowPosition>
+ </File>
+ </Group>
+
+ <MDIGroups>
+ <Orientation>1</Orientation>
+ <ActiveMDIGroup>0</ActiveMDIGroup>
+ <MDIGroup>
+ <Size>100</Size>
+ <ActiveTab>0</ActiveTab>
+ <Documents>
+ <Doc>
+ <Name>.\readme.txt</Name>
+ <ColumnNumber>0</ColumnNumber>
+ <TopLine>1</TopLine>
+ <CurrentLine>1</CurrentLine>
+ </Doc>
+ </Documents>
+ </MDIGroup>
+ </MDIGroups>
+
+</ProjectOpt>
diff --git a/boards/ek-tm4c123gxl/udma_demo/udma_demo.uvproj b/boards/ek-tm4c123gxl/udma_demo/udma_demo.uvproj new file mode 100644 index 0000000..afe2469 --- /dev/null +++ b/boards/ek-tm4c123gxl/udma_demo/udma_demo.uvproj @@ -0,0 +1,439 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+ <SchemaVersion>1.1</SchemaVersion>
+
+ <Header>### uVision Project, (C) Keil Software</Header>
+
+ <Targets>
+ <Target>
+ <TargetName>udma_demo</TargetName>
+ <ToolsetNumber>0x4</ToolsetNumber>
+ <ToolsetName>ARM-ADS</ToolsetName>
+ <TargetOption>
+ <TargetCommonOption>
+ <Device>TM4C123GH6PM</Device>
+ <Vendor>Texas Instruments</Vendor>
+ <Cpu>IRAM(0x20000000-0x20007FFF) IROM(0-0x3FFFF) CLOCK(8000000) CPUTYPE("Cortex-M4") FPU2</Cpu>
+ <FlashUtilSpec></FlashUtilSpec>
+ <StartupFile>"STARTUP\Luminary\Startup.s" ("Luminary Startup Code")</StartupFile>
+ <FlashDriverDll>UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0LM4F_256 -FS00 -FL040000)</FlashDriverDll>
+ <DeviceId>5919</DeviceId>
+ <RegisterFile>LM4Fxxxx.H</RegisterFile>
+ <MemoryEnv></MemoryEnv>
+ <Cmp></Cmp>
+ <Asm></Asm>
+ <Linker></Linker>
+ <OHString></OHString>
+ <InfinionOptionDll></InfinionOptionDll>
+ <SLE66CMisc></SLE66CMisc>
+ <SLE66AMisc></SLE66AMisc>
+ <SLE66LinkerMisc></SLE66LinkerMisc>
+ <UseEnv>0</UseEnv>
+ <BinPath></BinPath>
+ <IncludePath></IncludePath>
+ <LibPath></LibPath>
+ <RegisterFilePath>Luminary\</RegisterFilePath>
+ <DBRegisterFilePath>Luminary\</DBRegisterFilePath>
+ <TargetStatus>
+ <Error>0</Error>
+ <ExitCodeStop>0</ExitCodeStop>
+ <ButtonStop>0</ButtonStop>
+ <NotGenerated>0</NotGenerated>
+ <InvalidFlash>1</InvalidFlash>
+ </TargetStatus>
+ <OutputDirectory>.\rvmdk\</OutputDirectory>
+ <OutputName>udma_demo</OutputName>
+ <CreateExecutable>1</CreateExecutable>
+ <CreateLib>0</CreateLib>
+ <CreateHexFile>0</CreateHexFile>
+ <DebugInformation>1</DebugInformation>
+ <BrowseInformation>1</BrowseInformation>
+ <ListingPath>.\rvmdk\</ListingPath>
+ <HexFormatSelection>1</HexFormatSelection>
+ <Merge32K>0</Merge32K>
+ <CreateBatchFile>0</CreateBatchFile>
+ <BeforeCompile>
+ <RunUserProg1>0</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name></UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </BeforeCompile>
+ <BeforeMake>
+ <RunUserProg1>0</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name></UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </BeforeMake>
+ <AfterMake>
+ <RunUserProg1>1</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name>fromelf --bin --output .\rvmdk\udma_demo.bin .\rvmdk\udma_demo.axf</UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </AfterMake>
+ <SelectedForBatchBuild>0</SelectedForBatchBuild>
+ <SVCSIdString></SVCSIdString>
+ </TargetCommonOption>
+ <CommonProperty>
+ <UseCPPCompiler>0</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <DllOption>
+ <SimDllName>SARMCM3.DLL</SimDllName>
+ <SimDllArguments>-MPU</SimDllArguments>
+ <SimDlgDll>DCM.DLL</SimDlgDll>
+ <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+ <TargetDllName>SARMCM3.DLL</TargetDllName>
+ <TargetDllArguments>-MPU</TargetDllArguments>
+ <TargetDlgDll>TCM.DLL</TargetDlgDll>
+ <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+ </DllOption>
+ <DebugOption>
+ <OPTHX>
+ <HexSelection>1</HexSelection>
+ <HexRangeLowAddress>0</HexRangeLowAddress>
+ <HexRangeHighAddress>0</HexRangeHighAddress>
+ <HexOffset>0</HexOffset>
+ <Oh166RecLen>16</Oh166RecLen>
+ </OPTHX>
+ <Simulator>
+ <UseSimulator>0</UseSimulator>
+ <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+ <RunToMain>1</RunToMain>
+ <RestoreBreakpoints>1</RestoreBreakpoints>
+ <RestoreWatchpoints>1</RestoreWatchpoints>
+ <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+ <RestoreFunctions>1</RestoreFunctions>
+ <RestoreToolbox>1</RestoreToolbox>
+ <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+ </Simulator>
+ <Target>
+ <UseTarget>1</UseTarget>
+ <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+ <RunToMain>0</RunToMain>
+ <RestoreBreakpoints>1</RestoreBreakpoints>
+ <RestoreWatchpoints>1</RestoreWatchpoints>
+ <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+ <RestoreFunctions>0</RestoreFunctions>
+ <RestoreToolbox>1</RestoreToolbox>
+ </Target>
+ <RunDebugAfterBuild>0</RunDebugAfterBuild>
+ <TargetSelection>4</TargetSelection>
+ <SimDlls>
+ <CpuDll></CpuDll>
+ <CpuDllArguments></CpuDllArguments>
+ <PeripheralDll></PeripheralDll>
+ <PeripheralDllArguments></PeripheralDllArguments>
+ <InitializationFile></InitializationFile>
+ </SimDlls>
+ <TargetDlls>
+ <CpuDll></CpuDll>
+ <CpuDllArguments></CpuDllArguments>
+ <PeripheralDll></PeripheralDll>
+ <PeripheralDllArguments></PeripheralDllArguments>
+ <InitializationFile></InitializationFile>
+ <Driver>BIN\lmidk-agdi.dll</Driver>
+ </TargetDlls>
+ </DebugOption>
+ <Utilities>
+ <Flash1>
+ <UseTargetDll>1</UseTargetDll>
+ <UseExternalTool>0</UseExternalTool>
+ <RunIndependent>0</RunIndependent>
+ <UpdateFlashBeforeDebugging>0</UpdateFlashBeforeDebugging>
+ <Capability>1</Capability>
+ <DriverSelection>4099</DriverSelection>
+ </Flash1>
+ <Flash2>BIN\lmidk-agdi.dll</Flash2>
+ <Flash3></Flash3>
+ <Flash4></Flash4>
+ </Utilities>
+ <TargetArmAds>
+ <ArmAdsMisc>
+ <GenerateListings>0</GenerateListings>
+ <asHll>1</asHll>
+ <asAsm>1</asAsm>
+ <asMacX>1</asMacX>
+ <asSyms>1</asSyms>
+ <asFals>1</asFals>
+ <asDbgD>1</asDbgD>
+ <asForm>1</asForm>
+ <ldLst>0</ldLst>
+ <ldmm>1</ldmm>
+ <ldXref>1</ldXref>
+ <BigEnd>0</BigEnd>
+ <AdsALst>0</AdsALst>
+ <AdsACrf>0</AdsACrf>
+ <AdsANop>0</AdsANop>
+ <AdsANot>0</AdsANot>
+ <AdsLLst>1</AdsLLst>
+ <AdsLmap>1</AdsLmap>
+ <AdsLcgr>1</AdsLcgr>
+ <AdsLsym>1</AdsLsym>
+ <AdsLszi>1</AdsLszi>
+ <AdsLtoi>1</AdsLtoi>
+ <AdsLsun>1</AdsLsun>
+ <AdsLven>1</AdsLven>
+ <AdsLsxf>1</AdsLsxf>
+ <RvctClst>0</RvctClst>
+ <GenPPlst>0</GenPPlst>
+ <AdsCpuType>"Cortex-M4"</AdsCpuType>
+ <RvctDeviceName></RvctDeviceName>
+ <mOS>0</mOS>
+ <uocRom>0</uocRom>
+ <uocRam>0</uocRam>
+ <hadIROM>1</hadIROM>
+ <hadIRAM>1</hadIRAM>
+ <hadXRAM>0</hadXRAM>
+ <uocXRam>0</uocXRam>
+ <RvdsVP>2</RvdsVP>
+ <hadIRAM2>0</hadIRAM2>
+ <hadIROM2>0</hadIROM2>
+ <StupSel>8</StupSel>
+ <useUlib>1</useUlib>
+ <EndSel>0</EndSel>
+ <uLtcg>0</uLtcg>
+ <RoSelD>3</RoSelD>
+ <RwSelD>3</RwSelD>
+ <CodeSel>0</CodeSel>
+ <OptFeed>0</OptFeed>
+ <NoZi1>0</NoZi1>
+ <NoZi2>0</NoZi2>
+ <NoZi3>0</NoZi3>
+ <NoZi4>0</NoZi4>
+ <NoZi5>0</NoZi5>
+ <Ro1Chk>0</Ro1Chk>
+ <Ro2Chk>0</Ro2Chk>
+ <Ro3Chk>0</Ro3Chk>
+ <Ir1Chk>1</Ir1Chk>
+ <Ir2Chk>0</Ir2Chk>
+ <Ra1Chk>0</Ra1Chk>
+ <Ra2Chk>0</Ra2Chk>
+ <Ra3Chk>0</Ra3Chk>
+ <Im1Chk>1</Im1Chk>
+ <Im2Chk>0</Im2Chk>
+ <OnChipMemories>
+ <Ocm1>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm1>
+ <Ocm2>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm2>
+ <Ocm3>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm3>
+ <Ocm4>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm4>
+ <Ocm5>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm5>
+ <Ocm6>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm6>
+ <IRAM>
+ <Type>0</Type>
+ <StartAddress>0x20000000</StartAddress>
+ <Size>0x8000</Size>
+ </IRAM>
+ <IROM>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x40000</Size>
+ </IROM>
+ <XRAM>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </XRAM>
+ <OCR_RVCT1>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT1>
+ <OCR_RVCT2>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT2>
+ <OCR_RVCT3>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT3>
+ <OCR_RVCT4>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x40000</Size>
+ </OCR_RVCT4>
+ <OCR_RVCT5>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT5>
+ <OCR_RVCT6>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT6>
+ <OCR_RVCT7>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT7>
+ <OCR_RVCT8>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT8>
+ <OCR_RVCT9>
+ <Type>0</Type>
+ <StartAddress>0x20000000</StartAddress>
+ <Size>0x8000</Size>
+ </OCR_RVCT9>
+ <OCR_RVCT10>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT10>
+ </OnChipMemories>
+ <RvctStartVector></RvctStartVector>
+ </ArmAdsMisc>
+ <Cads>
+ <interw>0</interw>
+ <Optim>3</Optim>
+ <oTime>0</oTime>
+ <SplitLS>0</SplitLS>
+ <OneElfS>1</OneElfS>
+ <Strict>0</Strict>
+ <EnumInt>0</EnumInt>
+ <PlainCh>0</PlainCh>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <wLevel>2</wLevel>
+ <uThumb>0</uThumb>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define>rvmdk PART_TM4C123GH6PM TARGET_IS_TM4C123_RB1</Define>
+ <Undefine></Undefine>
+ <IncludePath>..\..\..\..;</IncludePath>
+ </VariousControls>
+ </Cads>
+ <Aads>
+ <interw>1</interw>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <thumb>0</thumb>
+ <SplitLS>0</SplitLS>
+ <SwStkChk>0</SwStkChk>
+ <NoWarn>0</NoWarn>
+ <VariousControls>
+ <MiscControls></MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Aads>
+ <LDads>
+ <umfTarg>0</umfTarg>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <noStLib>0</noStLib>
+ <RepFail>1</RepFail>
+ <useFile>0</useFile>
+ <TextAddressRange>0x00000000</TextAddressRange>
+ <DataAddressRange>0x20000000</DataAddressRange>
+ <ScatterFile>udma_demo.sct</ScatterFile>
+ <IncludeLibs></IncludeLibs>
+ <IncludeLibsPath></IncludeLibsPath>
+ <Misc>--entry Reset_Handler</Misc>
+ <LinkerInputFile></LinkerInputFile>
+ <DisabledWarnings></DisabledWarnings>
+ </LDads>
+ </TargetArmAds>
+ </TargetOption>
+ <Groups>
+ <Group>
+ <GroupName>Source</GroupName>
+ <Files>
+ <File>
+ <FileName>cpu_usage.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>..\..\..\..\utils\cpu_usage.c</FilePath>
+ </File>
+ <File>
+ <FileName>startup_rvmdk.S</FileName>
+ <FileType>2</FileType>
+ <FilePath>.\startup_rvmdk.S</FilePath>
+ </File>
+ <File>
+ <FileName>uartstdio.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>..\..\..\..\utils\uartstdio.c</FilePath>
+ </File>
+ <File>
+ <FileName>udma_demo.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>.\udma_demo.c</FilePath>
+ </File>
+ <File>
+ <FileName>ustdlib.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>..\..\..\..\utils\ustdlib.c</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>Libraries</GroupName>
+ <Files>
+ <File>
+ <FileName>driverlib.lib</FileName>
+ <FileType>4</FileType>
+ <FilePath>..\..\..\..\driverlib\rvmdk\driverlib.lib</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>Documentation</GroupName>
+ <Files>
+ <File>
+ <FileName>readme.txt</FileName>
+ <FileType>5</FileType>
+ <FilePath>.\readme.txt</FilePath>
+ </File>
+ </Files>
+ </Group>
+ </Groups>
+ </Target>
+ </Targets>
+
+</Project>
diff --git a/boards/ek-tm4c123gxl/udma_demo/udma_demo_ccs.cmd b/boards/ek-tm4c123gxl/udma_demo/udma_demo_ccs.cmd new file mode 100644 index 0000000..33ec7a8 --- /dev/null +++ b/boards/ek-tm4c123gxl/udma_demo/udma_demo_ccs.cmd @@ -0,0 +1,70 @@ +/******************************************************************************
+ *
+ * udma_demo_ccs.cmd - CCS linker configuration file for udma_demo.
+ *
+ * Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+ * Software License Agreement
+ *
+ * Texas Instruments (TI) is supplying this software for use solely and
+ * exclusively on TI's microcontroller products. The software is owned by
+ * TI and/or its suppliers, and is protected under applicable copyright
+ * laws. You may not combine this software with "viral" open-source
+ * software in order to form a larger program.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+ * NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+ * NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+ * CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+ * DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ * This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+ *
+ *****************************************************************************/
+
+--retain=g_pfnVectors
+
+/* The following command line options are set as part of the CCS project. */
+/* If you are building using the command line, or for some reason want to */
+/* define them here, you can uncomment and modify these lines as needed. */
+/* If you are using CCS for building, it is probably better to make any such */
+/* modifications in your CCS project and leave this file alone. */
+/* */
+/* --heap_size=0 */
+/* --stack_size=256 */
+/* --library=rtsv7M3_T_le_eabi.lib */
+
+/* The starting address of the application. Normally the interrupt vectors */
+/* must be located at the beginning of the application. */
+#define APP_BASE 0x00000000
+#define RAM_BASE 0x20000000
+
+/* System memory map */
+
+MEMORY
+{
+ /* Application stored in and executes from internal flash */
+ FLASH (RX) : origin = APP_BASE, length = 0x00040000
+ /* Application uses internal RAM for data */
+ SRAM (RWX) : origin = 0x20000000, length = 0x00008000
+}
+
+/* Section allocation in memory */
+
+SECTIONS
+{
+ .intvecs: > APP_BASE
+ .text : > FLASH
+ .const : > FLASH
+ .cinit : > FLASH
+ .pinit : > FLASH
+ .init_array : > FLASH
+
+ .vtable : > RAM_BASE
+ .data : > SRAM
+ .bss : > SRAM
+ .sysmem : > SRAM
+ .stack : > SRAM
+}
+
+__STACK_TOP = __stack + 1024;
diff --git a/boards/ek-tm4c123gxl/usb_dev_bulk/Makefile b/boards/ek-tm4c123gxl/usb_dev_bulk/Makefile new file mode 100644 index 0000000..93eb252 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_bulk/Makefile @@ -0,0 +1,89 @@ +#******************************************************************************
+#
+# Makefile - Rules for building the USB device bulk example.
+#
+# Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+# Software License Agreement
+#
+# Texas Instruments (TI) is supplying this software for use solely and
+# exclusively on TI's microcontroller products. The software is owned by
+# TI and/or its suppliers, and is protected under applicable copyright
+# laws. You may not combine this software with "viral" open-source
+# software in order to form a larger program.
+#
+# THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+# NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+# NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+# CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+# DAMAGES, FOR ANY REASON WHATSOEVER.
+#
+# This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+#
+#******************************************************************************
+
+#
+# Defines the part type that this project uses.
+#
+PART=TM4C123GH6PM
+
+#
+# The base directory for TivaWare.
+#
+ROOT=../../../..
+
+#
+# Include the common make definitions.
+#
+include ${ROOT}/makedefs
+
+#
+# Where to find source files that do not live in this directory.
+#
+VPATH=
+VPATH+=../../../../utils
+
+#
+# Where to find header files that do not live in the source directory.
+#
+IPATH=../../../..
+
+#
+# The default rule, which causes the USB device bulk example to be built.
+#
+all: ${COMPILER}
+all: ${COMPILER}/usb_dev_bulk.axf
+
+#
+# The rule to clean out all the build products.
+#
+clean:
+ @rm -rf ${COMPILER} ${wildcard *~}
+
+#
+# The rule to create the target directory.
+#
+${COMPILER}:
+ @mkdir -p ${COMPILER}
+
+#
+# Rules for building the USB device bulk example.
+#
+${COMPILER}/usb_dev_bulk.axf: ${COMPILER}/startup_${COMPILER}.o
+${COMPILER}/usb_dev_bulk.axf: ${COMPILER}/uartstdio.o
+${COMPILER}/usb_dev_bulk.axf: ${COMPILER}/usb_bulk_structs.o
+${COMPILER}/usb_dev_bulk.axf: ${COMPILER}/usb_dev_bulk.o
+${COMPILER}/usb_dev_bulk.axf: ${COMPILER}/ustdlib.o
+${COMPILER}/usb_dev_bulk.axf: ${ROOT}/usblib/${COMPILER}/libusb.a
+${COMPILER}/usb_dev_bulk.axf: ${ROOT}/driverlib/${COMPILER}/libdriver.a
+${COMPILER}/usb_dev_bulk.axf: usb_dev_bulk.ld
+SCATTERgcc_usb_dev_bulk=usb_dev_bulk.ld
+ENTRY_usb_dev_bulk=ResetISR
+CFLAGSgcc=-DTARGET_IS_TM4C123_RB1 -DUART_BUFFERED
+
+#
+# Include the automatically generated dependency files.
+#
+ifneq (${MAKECMDGOALS},clean)
+-include ${wildcard ${COMPILER}/*.d} __dummy__
+endif
diff --git a/boards/ek-tm4c123gxl/usb_dev_bulk/ccs/.ccsimportspec b/boards/ek-tm4c123gxl/usb_dev_bulk/ccs/.ccsimportspec new file mode 100644 index 0000000..6c9f4a0 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_bulk/ccs/.ccsimportspec @@ -0,0 +1,10 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<importSpec>
+ <source root="..">
+ <file name="usb_dev_bulk.c"/>
+ <file name="usb_bulk_structs.c"/>
+ <file name="usb_bulk_structs.h"/>
+ <file regex=".*_ccs\.cmd"/>
+ <file name="startup_ccs.c"/>
+ </source>
+</importSpec>
diff --git a/boards/ek-tm4c123gxl/usb_dev_bulk/ccs/.ccsproject b/boards/ek-tm4c123gxl/usb_dev_bulk/ccs/.ccsproject new file mode 100644 index 0000000..75fb50e --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_bulk/ccs/.ccsproject @@ -0,0 +1,10 @@ +<?xml version="1.0" encoding="UTF-8" ?>
+<?ccsproject version="1.0"?>
+<projectOptions>
+ <deviceVariant value="Cortex M.TM4C123GH6PM"/>
+ <deviceFamily value="TMS470"/>
+ <deviceEndianness value="little"/>
+ <codegenToolVersion value="5.0.4"/>
+ <isElfFormat value="true"/>
+ <rts value="libc.a"/>
+</projectOptions>
diff --git a/boards/ek-tm4c123gxl/usb_dev_bulk/ccs/.cproject b/boards/ek-tm4c123gxl/usb_dev_bulk/ccs/.cproject new file mode 100644 index 0000000..2784dba --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_bulk/ccs/.cproject @@ -0,0 +1,191 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+ <storageModule configRelations="2" moduleId="org.eclipse.cdt.core.settings">
+ <cconfiguration id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1922382453">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1922382453" moduleId="org.eclipse.cdt.core.settings" name="Debug">
+ <macros>
+ <stringMacro name="SW_ROOT" type="VALUE_PATH_DIR" value="${PROJECT_ROOT}/../../../../.."/>
+ </macros>
+ <externalSettings/>
+ <extensions>
+ <extension id="com.ti.ccstudio.binaryparser.CoffParser" point="org.eclipse.cdt.core.BinaryParser"/>
+ <extension id="com.ti.ccstudio.errorparser.CoffErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.LinkErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.AsmErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactExtension="out" artifactName="${ProjName}" buildProperties="" cleanCommand="${CG_CLEAN_CMD}" description="" id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1922382453" name="Debug" parent="com.ti.ccstudio.buildDefinitions.TMS470.Debug" postbuildStep=""${CCE_INSTALL_ROOT}/utils/tiobj2bin/tiobj2bin" "${BuildArtifactFileName}" "${BuildArtifactFileBaseName}.bin" "${CG_TOOL_ROOT}/bin/armofd" "${CG_TOOL_ROOT}/bin/armhex" "${CCE_INSTALL_ROOT}/utils/tiobj2bin/mkhex4bin"">
+ <folderInfo id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1922382453." name="/" resourcePath="">
+ <toolChain id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.DebugToolchain.1857199129" name="TI Build Tools" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.DebugToolchain" targetTool="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug.38627582">
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS.143755323" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS" valueType="stringList">
+ <listOptionValue builtIn="false" value="DEVICE_CONFIGURATION_ID=Cortex M.TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="DEVICE_ENDIANNESS=little"/>
+ <listOptionValue builtIn="false" value="OUTPUT_FORMAT=ELF"/>
+ <listOptionValue builtIn="false" value="CCS_MBS_VERSION=5.1.0.01"/>
+ <listOptionValue builtIn="false" value="RUNTIME_SUPPORT_LIBRARY=libc.a"/>
+ <listOptionValue builtIn="false" value="OUTPUT_TYPE=executable"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION.2023594871" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION" value="5.0.4" valueType="string"/>
+ <targetPlatform id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformDebug.1963522579" name="Platform" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformDebug"/>
+ <builder buildPath="${BuildDirectory}" id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderDebug.1011239533" name="GNU Make.Debug" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderDebug"/>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerDebug.1257626927" name="ARM Compiler" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerDebug">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.1759225696" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.7M4" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.1274052684" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.1407595714" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.eabi" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.1144725327" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.FPv4SPD16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL.1408803306" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL.SYMDEBUG__DWARF" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING.893069305" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING" valueType="stringList">
+ <listOptionValue builtIn="false" value="225"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER.48525283" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.1082627908" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH.174139015" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH" valueType="includePath">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN.995324226" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.681021279" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.on" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL.1056175377" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL.2" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC.1515751121" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL.1814875360" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE.551433336" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE" valueType="definedSymbols">
+ <listOptionValue builtIn="false" value="ccs="ccs""/>
+ <listOptionValue builtIn="false" value="PART_TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="TARGET_IS_TM4C123_RB1"/>
+ <listOptionValue builtIn="false" value="UART_BUFFERED"/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS.114209822" name="C Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS.64531713" name="C++ Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS.469032586" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS.337758364" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS"/>
+ </tool>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug.38627582" name="ARM Linker" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE.430392044" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE" value=""usb_dev_bulk_ccs.map"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE.1591467483" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE" value="1024" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE.984120717" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE" value="0" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE.1728550257" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE" value=""${ProjName}.out"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO.259438753" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO" value=""${ProjName}_linkInfo.xml"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER.2095135435" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.1411751134" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH.410958489" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH" valueType="libPaths">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/lib""/>
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY.1059632256" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY" valueType="libs">
+ <listOptionValue builtIn="false" value=""libc.a""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/driverlib/ccs/Debug/driverlib.lib""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/usblib/ccs/Debug/usblib.lib""/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS.2033304128" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS.992940365" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS.1298231240" name="Generated Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS"/>
+ </tool>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ <cconfiguration id="com.ti.ccstudio.buildDefinitions.TMS470.Release.141212735">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.ti.ccstudio.buildDefinitions.TMS470.Release.141212735" moduleId="org.eclipse.cdt.core.settings" name="Release">
+ <macros>
+ <stringMacro name="SW_ROOT" type="VALUE_PATH_DIR" value="${PROJECT_ROOT}/../../../../.."/>
+ </macros>
+ <externalSettings/>
+ <extensions>
+ <extension id="com.ti.ccstudio.binaryparser.CoffParser" point="org.eclipse.cdt.core.BinaryParser"/>
+ <extension id="com.ti.ccstudio.errorparser.CoffErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.LinkErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.AsmErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactExtension="out" artifactName="${ProjName}" buildProperties="" cleanCommand="${CG_CLEAN_CMD}" description="" id="com.ti.ccstudio.buildDefinitions.TMS470.Release.141212735" name="Release" parent="com.ti.ccstudio.buildDefinitions.TMS470.Release" postbuildStep=""${CCE_INSTALL_ROOT}/utils/tiobj2bin/tiobj2bin" "${BuildArtifactFileName}" "${BuildArtifactFileBaseName}.bin" "${CG_TOOL_ROOT}/bin/armofd" "${CG_TOOL_ROOT}/bin/armhex" "${CCE_INSTALL_ROOT}/utils/tiobj2bin/mkhex4bin"">
+ <folderInfo id="com.ti.ccstudio.buildDefinitions.TMS470.Release.141212735." name="/" resourcePath="">
+ <toolChain id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.ReleaseToolchain.512733884" name="TI Build Tools" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.ReleaseToolchain" targetTool="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease.1881060535">
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS.950215675" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS" valueType="stringList">
+ <listOptionValue builtIn="false" value="DEVICE_CONFIGURATION_ID=Cortex M.TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="DEVICE_ENDIANNESS=little"/>
+ <listOptionValue builtIn="false" value="OUTPUT_FORMAT=ELF"/>
+ <listOptionValue builtIn="false" value="CCS_MBS_VERSION=5.1.0.01"/>
+ <listOptionValue builtIn="false" value="RUNTIME_SUPPORT_LIBRARY=libc.a"/>
+ <listOptionValue builtIn="false" value="OUTPUT_TYPE=executable"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION.955549395" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION" value="5.0.4" valueType="string"/>
+ <targetPlatform id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformRelease.1079541612" name="Platform" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformRelease"/>
+ <builder buildPath="${BuildDirectory}" id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderRelease.1141669281" name="GNU Make.Release" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderRelease"/>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerRelease.1983084151" name="ARM Compiler" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerRelease">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.419117873" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.7M4" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.1779320429" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.1440673121" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.eabi" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.1052394621" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.FPv4SPD16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING.922584589" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING" valueType="stringList">
+ <listOptionValue builtIn="false" value="225"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER.735706468" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.740941280" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH.1966950692" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH" valueType="includePath">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN.1139167201" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.854230061" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.on" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC.537960848" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL.552184741" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE.1249784805" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE" valueType="definedSymbols">
+ <listOptionValue builtIn="false" value="ccs="ccs""/>
+ <listOptionValue builtIn="false" value="PART_TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="TARGET_IS_TM4C123_RB1"/>
+ <listOptionValue builtIn="false" value="UART_BUFFERED"/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS.1534654082" name="C Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS.754646367" name="C++ Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS.1138477503" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS.1636542796" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS"/>
+ </tool>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease.1881060535" name="ARM Linker" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE.1159806414" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE" value=""usb_dev_bulk_ccs.map"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE.342570073" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE" value="1024" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE.1591627215" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE" value="0" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE.1349207282" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE" value=""${ProjName}.out"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO.750663166" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO" value=""${ProjName}_linkInfo.xml"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER.968163055" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.1319554940" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH.2121294695" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH" valueType="libPaths">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/lib""/>
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY.120187750" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY" valueType="libs">
+ <listOptionValue builtIn="false" value=""libc.a""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/driverlib/ccs/Debug/driverlib.lib""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/usblib/ccs/Debug/usblib.lib""/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS.134607046" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS.1778588682" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS.1041767877" name="Generated Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS"/>
+ </tool>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <project id="usb_dev_bulk.com.ti.ccstudio.buildDefinitions.TMS470.ProjectType.1178633107" name="ARM" projectType="com.ti.ccstudio.buildDefinitions.TMS470.ProjectType"/>
+ </storageModule>
+ <storageModule moduleId="scannerConfiguration"/>
+ <storageModule moduleId="org.eclipse.cdt.core.language.mapping">
+ <project-mappings>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.asmSource" language="com.ti.ccstudio.core.TIASMLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cHeader" language="com.ti.ccstudio.core.TIGCCLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cSource" language="com.ti.ccstudio.core.TIGCCLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cxxHeader" language="com.ti.ccstudio.core.TIGPPLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cxxSource" language="com.ti.ccstudio.core.TIGPPLanguage"/>
+ </project-mappings>
+ </storageModule>
+</cproject>
diff --git a/boards/ek-tm4c123gxl/usb_dev_bulk/ccs/.project b/boards/ek-tm4c123gxl/usb_dev_bulk/ccs/.project new file mode 100644 index 0000000..cdb8cce --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_bulk/ccs/.project @@ -0,0 +1,65 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+ <name>usb_dev_bulk</name>
+ <comment></comment>
+ <projects>
+ </projects>
+ <buildSpec>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+ <triggers>full,incremental,</triggers>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ </buildSpec>
+ <natures>
+ <nature>com.ti.ccstudio.core.ccsNature</nature>
+ <nature>org.eclipse.cdt.core.cnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+ <nature>org.eclipse.cdt.core.ccnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+ </natures>
+ <linkedResources>
+ <link>
+ <name>startup_ccs.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/usb_dev_bulk/startup_ccs.c</locationURI>
+ </link>
+ <link>
+ <name>usb_bulk_structs.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/usb_dev_bulk/usb_bulk_structs.c</locationURI>
+ </link>
+ <link>
+ <name>usb_dev_bulk.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/usb_dev_bulk/usb_dev_bulk.c</locationURI>
+ </link>
+ <link>
+ <name>usb_dev_bulk_ccs.cmd</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/usb_dev_bulk/usb_dev_bulk_ccs.cmd</locationURI>
+ </link>
+ <link>
+ <name>utils/uartstdio.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/utils/uartstdio.c</locationURI>
+ </link>
+ <link>
+ <name>utils/ustdlib.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/utils/ustdlib.c</locationURI>
+ </link>
+ </linkedResources>
+ <variableList>
+ <variable>
+ <name>SW_ROOT</name>
+ <value>$%7BPARENT-5-PROJECT_LOC%7D</value>
+ </variable>
+ </variableList>
+</projectDescription>
diff --git a/boards/ek-tm4c123gxl/usb_dev_bulk/ccs/.settings/org.eclipse.cdt.codan.core.prefs b/boards/ek-tm4c123gxl/usb_dev_bulk/ccs/.settings/org.eclipse.cdt.codan.core.prefs new file mode 100644 index 0000000..98b6350 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_bulk/ccs/.settings/org.eclipse.cdt.codan.core.prefs @@ -0,0 +1,3 @@ +eclipse.preferences.version=1
+inEditor=false
+onBuild=false
diff --git a/boards/ek-tm4c123gxl/usb_dev_bulk/ccs/Debug/usb_dev_bulk.bin b/boards/ek-tm4c123gxl/usb_dev_bulk/ccs/Debug/usb_dev_bulk.bin Binary files differnew file mode 100644 index 0000000..9bb4536 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_bulk/ccs/Debug/usb_dev_bulk.bin diff --git a/boards/ek-tm4c123gxl/usb_dev_bulk/ccs/Debug/usb_dev_bulk.out b/boards/ek-tm4c123gxl/usb_dev_bulk/ccs/Debug/usb_dev_bulk.out Binary files differnew file mode 100644 index 0000000..0c7274b --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_bulk/ccs/Debug/usb_dev_bulk.out diff --git a/boards/ek-tm4c123gxl/usb_dev_bulk/ccs/macros.ini_initial b/boards/ek-tm4c123gxl/usb_dev_bulk/ccs/macros.ini_initial new file mode 100644 index 0000000..31214b5 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_bulk/ccs/macros.ini_initial @@ -0,0 +1 @@ +SW_ROOT = ../../../../..
diff --git a/boards/ek-tm4c123gxl/usb_dev_bulk/ccs/target_config.ccxml b/boards/ek-tm4c123gxl/usb_dev_bulk/ccs/target_config.ccxml new file mode 100644 index 0000000..be4342a --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_bulk/ccs/target_config.ccxml @@ -0,0 +1,13 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<configurations XML_version="1.2" id="configurations_0">
+ <configuration XML_version="1.2" id="Stellaris In-Circuit Debug Interface_0">
+ <instance XML_version="1.2" desc="Stellaris In-Circuit Debug Interface_0" href="connections/Stellaris_ICDI_Connection.xml" id="Stellaris In-Circuit Debug Interface_0" xml="Stellaris_ICDI_Connection.xml" xmlpath="connections"/>
+ <connection XML_version="1.2" id="Stellaris In-Circuit Debug Interface_0">
+ <instance XML_version="1.2" href="drivers/stellaris_cs_dap.xml" id="drivers" xml="stellaris_cs_dap.xml" xmlpath="drivers"/>
+ <instance XML_version="1.2" href="drivers/stellaris_cortex_m4.xml" id="drivers" xml="stellaris_cortex_m4.xml" xmlpath="drivers"/>
+ <platform XML_version="1.2" id="platform_0">
+ <instance XML_version="1.2" desc="Stellaris TM4C123GH6PM_0" href="devices/tm4c123gh6pm.xml" id="Stellaris TM4C123GH6PM_0" xml="tm4c123gh6pm.xml" xmlpath="devices"/>
+ </platform>
+ </connection>
+ </configuration>
+</configurations>
diff --git a/boards/ek-tm4c123gxl/usb_dev_bulk/ewarm/Exe/usb_dev_bulk.bin b/boards/ek-tm4c123gxl/usb_dev_bulk/ewarm/Exe/usb_dev_bulk.bin Binary files differnew file mode 100644 index 0000000..f3d4e3b --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_bulk/ewarm/Exe/usb_dev_bulk.bin diff --git a/boards/ek-tm4c123gxl/usb_dev_bulk/ewarm/Exe/usb_dev_bulk.out b/boards/ek-tm4c123gxl/usb_dev_bulk/ewarm/Exe/usb_dev_bulk.out Binary files differnew file mode 100644 index 0000000..75bdd35 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_bulk/ewarm/Exe/usb_dev_bulk.out diff --git a/boards/ek-tm4c123gxl/usb_dev_bulk/gcc/usb_dev_bulk.axf b/boards/ek-tm4c123gxl/usb_dev_bulk/gcc/usb_dev_bulk.axf Binary files differnew file mode 100644 index 0000000..cef67c2 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_bulk/gcc/usb_dev_bulk.axf diff --git a/boards/ek-tm4c123gxl/usb_dev_bulk/gcc/usb_dev_bulk.bin b/boards/ek-tm4c123gxl/usb_dev_bulk/gcc/usb_dev_bulk.bin Binary files differnew file mode 100644 index 0000000..f81c2bc --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_bulk/gcc/usb_dev_bulk.bin diff --git a/boards/ek-tm4c123gxl/usb_dev_bulk/readme.txt b/boards/ek-tm4c123gxl/usb_dev_bulk/readme.txt new file mode 100644 index 0000000..70eaf78 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_bulk/readme.txt @@ -0,0 +1,43 @@ +USB Generic Bulk Device
+
+This example provides a generic USB device offering simple bulk data
+transfer to and from the host. The device uses a vendor-specific class ID
+and supports a single bulk IN endpoint and a single bulk OUT endpoint.
+Data received from the host is assumed to be ASCII text and it is
+echoed back with the case of all alphabetic characters swapped.
+
+A Windows INF file for the device is provided on the installation CD and
+in the C:/ti/TivaWare-for-C-Series/windows_drivers directory of TivaWare C
+series releases. This INF contains information required to install the
+WinUSB subsystem on Windowi16XP and Vista PCs. WinUSB is a Windows
+subsystem allowing user mode applications to access the USB device without
+the need for a vendor-specific kernel mode driver.
+
+A sample Windows command-line application, usb_bulk_example, illustrating
+how to connect to and communicate with the bulk device is also provided.
+The application binary is installed as part of the ''Windows-side examples
+for USB kits'' package (SW-USB-win) on the installation CD or via download
+from http://www.ti.com/tivaware . Project files are included to allow
+the examples to be built using Microsoft VisualStudio 2008. Source code
+for this application can be found in directory
+TivaWare-for-C-Series/tools/usb_bulk_example.
+
+-------------------------------------------------------------------------------
+
+Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+Software License Agreement
+
+Texas Instruments (TI) is supplying this software for use solely and
+exclusively on TI's microcontroller products. The software is owned by
+TI and/or its suppliers, and is protected under applicable copyright
+laws. You may not combine this software with "viral" open-source
+software in order to form a larger program.
+
+THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+DAMAGES, FOR ANY REASON WHATSOEVER.
+
+This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
diff --git a/boards/ek-tm4c123gxl/usb_dev_bulk/rvmdk/usb_dev_bulk.axf b/boards/ek-tm4c123gxl/usb_dev_bulk/rvmdk/usb_dev_bulk.axf Binary files differnew file mode 100644 index 0000000..43a7993 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_bulk/rvmdk/usb_dev_bulk.axf diff --git a/boards/ek-tm4c123gxl/usb_dev_bulk/rvmdk/usb_dev_bulk.bin b/boards/ek-tm4c123gxl/usb_dev_bulk/rvmdk/usb_dev_bulk.bin Binary files differnew file mode 100644 index 0000000..01e0587 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_bulk/rvmdk/usb_dev_bulk.bin diff --git a/boards/ek-tm4c123gxl/usb_dev_bulk/startup_ccs.c b/boards/ek-tm4c123gxl/usb_dev_bulk/startup_ccs.c new file mode 100644 index 0000000..3f144d9 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_bulk/startup_ccs.c @@ -0,0 +1,304 @@ +//*****************************************************************************
+//
+// startup_ccs.c - Startup code for use with TI's Code Composer Studio.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// External declaration for the reset handler that is to be called when the
+// processor is started
+//
+//*****************************************************************************
+extern void _c_int00(void);
+
+//*****************************************************************************
+//
+// Linker variable that marks the top of the stack.
+//
+//*****************************************************************************
+extern uint32_t __STACK_TOP;
+
+//*****************************************************************************
+//
+// External declarations for the interrupt handlers used by the application.
+//
+//*****************************************************************************
+extern void SysTickIntHandler(void);
+extern void UARTStdioIntHandler(void);
+extern void USB0DeviceIntHandler(void);
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000 or at the start of
+// the program if located at a start address other than 0.
+//
+//*****************************************************************************
+#pragma DATA_SECTION(g_pfnVectors, ".intvecs")
+void (* const g_pfnVectors[])(void) =
+{
+ (void (*)(void))((uint32_t)&__STACK_TOP),
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ SysTickIntHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ UARTStdioIntHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ USB0DeviceIntHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ //
+ // Jump to the CCS C initialization routine. This will enable the
+ // floating-point unit as well, so that does not need to be done here.
+ //
+ __asm(" .global _c_int00\n"
+ " b.w _c_int00");
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/usb_dev_bulk/startup_ewarm.c b/boards/ek-tm4c123gxl/usb_dev_bulk/startup_ewarm.c new file mode 100644 index 0000000..ca74b82 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_bulk/startup_ewarm.c @@ -0,0 +1,335 @@ +//*****************************************************************************
+//
+// startup_ewarm.c - Startup code for use with IAR's Embedded Workbench,
+// version 5.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Enable the IAR extensions for this source file.
+//
+//*****************************************************************************
+#pragma language=extended
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// External declarations for the interrupt handlers used by the application.
+//
+//*****************************************************************************
+extern void SysTickIntHandler(void);
+extern void UARTStdioIntHandler(void);
+extern void USB0DeviceIntHandler(void);
+
+//*****************************************************************************
+//
+// The entry point for the application startup code.
+//
+//*****************************************************************************
+extern void __iar_program_start(void);
+
+//*****************************************************************************
+//
+// Reserve space for the system stack.
+//
+//*****************************************************************************
+static uint32_t pui32Stack[256] @ ".noinit";
+
+//*****************************************************************************
+//
+// A union that describes the entries of the vector table. The union is needed
+// since the first entry is the stack pointer and the remainder are function
+// pointers.
+//
+//*****************************************************************************
+typedef union
+{
+ void (*pfnHandler)(void);
+ uint32_t ui32Ptr;
+}
+uVectorEntry;
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000.
+//
+//*****************************************************************************
+__root const uVectorEntry __vector_table[] @ ".intvec" =
+{
+ { .ui32Ptr = (uint32_t)pui32Stack + sizeof(pui32Stack) },
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ SysTickIntHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ UARTStdioIntHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ USB0DeviceIntHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ //
+ // Enable the floating-point unit. This must be done here to handle the
+ // case where main() uses floating-point and the function prologue saves
+ // floating-point registers (which will fault if floating-point is not
+ // enabled). Any configuration of the floating-point unit using DriverLib
+ // APIs must be done here prior to the floating-point unit being enabled.
+ //
+ // Note that this does not use DriverLib since it might not be included in
+ // this project.
+ //
+ HWREG(NVIC_CPAC) = ((HWREG(NVIC_CPAC) &
+ ~(NVIC_CPAC_CP10_M | NVIC_CPAC_CP11_M)) |
+ NVIC_CPAC_CP10_FULL | NVIC_CPAC_CP11_FULL);
+
+ //
+ // Call the application's entry point.
+ //
+ __iar_program_start();
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/usb_dev_bulk/startup_gcc.c b/boards/ek-tm4c123gxl/usb_dev_bulk/startup_gcc.c new file mode 100644 index 0000000..76cbf3d --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_bulk/startup_gcc.c @@ -0,0 +1,351 @@ +//*****************************************************************************
+//
+// startup_gcc.c - Startup code for use with GNU tools.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// External declarations for the interrupt handlers used by the application.
+//
+//*****************************************************************************
+extern void SysTickIntHandler(void);
+extern void UARTStdioIntHandler(void);
+extern void USB0DeviceIntHandler(void);
+
+//*****************************************************************************
+//
+// The entry point for the application.
+//
+//*****************************************************************************
+extern int main(void);
+
+//*****************************************************************************
+//
+// Reserve space for the system stack.
+//
+//*****************************************************************************
+static uint32_t pui32Stack[256];
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000.
+//
+//*****************************************************************************
+__attribute__ ((section(".isr_vector")))
+void (* const g_pfnVectors[])(void) =
+{
+ (void (*)(void))((uint32_t)pui32Stack + sizeof(pui32Stack)),
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ SysTickIntHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ UARTStdioIntHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ USB0DeviceIntHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// The following are constructs created by the linker, indicating where the
+// the "data" and "bss" segments reside in memory. The initializers for the
+// for the "data" segment resides immediately following the "text" segment.
+//
+//*****************************************************************************
+extern uint32_t _etext;
+extern uint32_t _data;
+extern uint32_t _edata;
+extern uint32_t _bss;
+extern uint32_t _ebss;
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ uint32_t *pui32Src, *pui32Dest;
+
+ //
+ // Copy the data segment initializers from flash to SRAM.
+ //
+ pui32Src = &_etext;
+ for(pui32Dest = &_data; pui32Dest < &_edata; )
+ {
+ *pui32Dest++ = *pui32Src++;
+ }
+
+ //
+ // Zero fill the bss segment.
+ //
+ __asm(" ldr r0, =_bss\n"
+ " ldr r1, =_ebss\n"
+ " mov r2, #0\n"
+ " .thumb_func\n"
+ "zero_loop:\n"
+ " cmp r0, r1\n"
+ " it lt\n"
+ " strlt r2, [r0], #4\n"
+ " blt zero_loop");
+
+ //
+ // Enable the floating-point unit. This must be done here to handle the
+ // case where main() uses floating-point and the function prologue saves
+ // floating-point registers (which will fault if floating-point is not
+ // enabled). Any configuration of the floating-point unit using DriverLib
+ // APIs must be done here prior to the floating-point unit being enabled.
+ //
+ // Note that this does not use DriverLib since it might not be included in
+ // this project.
+ //
+ HWREG(NVIC_CPAC) = ((HWREG(NVIC_CPAC) &
+ ~(NVIC_CPAC_CP10_M | NVIC_CPAC_CP11_M)) |
+ NVIC_CPAC_CP10_FULL | NVIC_CPAC_CP11_FULL);
+
+ //
+ // Call the application's entry point.
+ //
+ main();
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/usb_dev_bulk/startup_rvmdk.S b/boards/ek-tm4c123gxl/usb_dev_bulk/startup_rvmdk.S new file mode 100644 index 0000000..64b5f90 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_bulk/startup_rvmdk.S @@ -0,0 +1,360 @@ +; <<< Use Configuration Wizard in Context Menu >>>
+;******************************************************************************
+;
+; startup_rvmdk.S - Startup code for use with Keil's uVision.
+;
+; Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+; Software License Agreement
+;
+; Texas Instruments (TI) is supplying this software for use solely and
+; exclusively on TI's microcontroller products. The software is owned by
+; TI and/or its suppliers, and is protected under applicable copyright
+; laws. You may not combine this software with "viral" open-source
+; software in order to form a larger program.
+;
+; THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+; NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+; NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+; A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+; CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+; DAMAGES, FOR ANY REASON WHATSOEVER.
+;
+; This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+;
+;******************************************************************************
+
+;******************************************************************************
+;
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+;******************************************************************************
+Stack EQU 0x00000400
+
+;******************************************************************************
+;
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+;******************************************************************************
+Heap EQU 0x00000000
+
+;******************************************************************************
+;
+; Allocate space for the stack.
+;
+;******************************************************************************
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+StackMem
+ SPACE Stack
+__initial_sp
+
+;******************************************************************************
+;
+; Allocate space for the heap.
+;
+;******************************************************************************
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+HeapMem
+ SPACE Heap
+__heap_limit
+
+;******************************************************************************
+;
+; Indicate that the code in this file preserves 8-byte alignment of the stack.
+;
+;******************************************************************************
+ PRESERVE8
+
+;******************************************************************************
+;
+; Place code into the reset code section.
+;
+;******************************************************************************
+ AREA RESET, CODE, READONLY
+ THUMB
+
+;******************************************************************************
+;
+; External declarations for the interrupt handlers used by the application.
+;
+;******************************************************************************
+ EXTERN SysTickIntHandler
+ EXTERN UARTStdioIntHandler
+ EXTERN USB0DeviceIntHandler
+
+;******************************************************************************
+;
+; The vector table.
+;
+;******************************************************************************
+ EXPORT __Vectors
+__Vectors
+ DCD StackMem + Stack ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NmiSR ; NMI Handler
+ DCD FaultISR ; Hard Fault Handler
+ DCD IntDefaultHandler ; The MPU fault handler
+ DCD IntDefaultHandler ; The bus fault handler
+ DCD IntDefaultHandler ; The usage fault handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; SVCall handler
+ DCD IntDefaultHandler ; Debug monitor handler
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; The PendSV handler
+ DCD SysTickIntHandler ; The SysTick handler
+ DCD IntDefaultHandler ; GPIO Port A
+ DCD IntDefaultHandler ; GPIO Port B
+ DCD IntDefaultHandler ; GPIO Port C
+ DCD IntDefaultHandler ; GPIO Port D
+ DCD IntDefaultHandler ; GPIO Port E
+ DCD UARTStdioIntHandler ; UART0 Rx and Tx
+ DCD IntDefaultHandler ; UART1 Rx and Tx
+ DCD IntDefaultHandler ; SSI0 Rx and Tx
+ DCD IntDefaultHandler ; I2C0 Master and Slave
+ DCD IntDefaultHandler ; PWM Fault
+ DCD IntDefaultHandler ; PWM Generator 0
+ DCD IntDefaultHandler ; PWM Generator 1
+ DCD IntDefaultHandler ; PWM Generator 2
+ DCD IntDefaultHandler ; Quadrature Encoder 0
+ DCD IntDefaultHandler ; ADC Sequence 0
+ DCD IntDefaultHandler ; ADC Sequence 1
+ DCD IntDefaultHandler ; ADC Sequence 2
+ DCD IntDefaultHandler ; ADC Sequence 3
+ DCD IntDefaultHandler ; Watchdog timer
+ DCD IntDefaultHandler ; Timer 0 subtimer A
+ DCD IntDefaultHandler ; Timer 0 subtimer B
+ DCD IntDefaultHandler ; Timer 1 subtimer A
+ DCD IntDefaultHandler ; Timer 1 subtimer B
+ DCD IntDefaultHandler ; Timer 2 subtimer A
+ DCD IntDefaultHandler ; Timer 2 subtimer B
+ DCD IntDefaultHandler ; Analog Comparator 0
+ DCD IntDefaultHandler ; Analog Comparator 1
+ DCD IntDefaultHandler ; Analog Comparator 2
+ DCD IntDefaultHandler ; System Control (PLL, OSC, BO)
+ DCD IntDefaultHandler ; FLASH Control
+ DCD IntDefaultHandler ; GPIO Port F
+ DCD IntDefaultHandler ; GPIO Port G
+ DCD IntDefaultHandler ; GPIO Port H
+ DCD IntDefaultHandler ; UART2 Rx and Tx
+ DCD IntDefaultHandler ; SSI1 Rx and Tx
+ DCD IntDefaultHandler ; Timer 3 subtimer A
+ DCD IntDefaultHandler ; Timer 3 subtimer B
+ DCD IntDefaultHandler ; I2C1 Master and Slave
+ DCD IntDefaultHandler ; Quadrature Encoder 1
+ DCD IntDefaultHandler ; CAN0
+ DCD IntDefaultHandler ; CAN1
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; Hibernate
+ DCD USB0DeviceIntHandler ; USB0
+ DCD IntDefaultHandler ; PWM Generator 3
+ DCD IntDefaultHandler ; uDMA Software Transfer
+ DCD IntDefaultHandler ; uDMA Error
+ DCD IntDefaultHandler ; ADC1 Sequence 0
+ DCD IntDefaultHandler ; ADC1 Sequence 1
+ DCD IntDefaultHandler ; ADC1 Sequence 2
+ DCD IntDefaultHandler ; ADC1 Sequence 3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; GPIO Port J
+ DCD IntDefaultHandler ; GPIO Port K
+ DCD IntDefaultHandler ; GPIO Port L
+ DCD IntDefaultHandler ; SSI2 Rx and Tx
+ DCD IntDefaultHandler ; SSI3 Rx and Tx
+ DCD IntDefaultHandler ; UART3 Rx and Tx
+ DCD IntDefaultHandler ; UART4 Rx and Tx
+ DCD IntDefaultHandler ; UART5 Rx and Tx
+ DCD IntDefaultHandler ; UART6 Rx and Tx
+ DCD IntDefaultHandler ; UART7 Rx and Tx
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; I2C2 Master and Slave
+ DCD IntDefaultHandler ; I2C3 Master and Slave
+ DCD IntDefaultHandler ; Timer 4 subtimer A
+ DCD IntDefaultHandler ; Timer 4 subtimer B
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; Timer 5 subtimer A
+ DCD IntDefaultHandler ; Timer 5 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 0 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 0 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 1 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 1 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 2 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 2 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 3 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 3 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 4 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 4 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 5 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 5 subtimer B
+ DCD IntDefaultHandler ; FPU
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; I2C4 Master and Slave
+ DCD IntDefaultHandler ; I2C5 Master and Slave
+ DCD IntDefaultHandler ; GPIO Port M
+ DCD IntDefaultHandler ; GPIO Port N
+ DCD IntDefaultHandler ; Quadrature Encoder 2
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; GPIO Port P (Summary or P0)
+ DCD IntDefaultHandler ; GPIO Port P1
+ DCD IntDefaultHandler ; GPIO Port P2
+ DCD IntDefaultHandler ; GPIO Port P3
+ DCD IntDefaultHandler ; GPIO Port P4
+ DCD IntDefaultHandler ; GPIO Port P5
+ DCD IntDefaultHandler ; GPIO Port P6
+ DCD IntDefaultHandler ; GPIO Port P7
+ DCD IntDefaultHandler ; GPIO Port Q (Summary or Q0)
+ DCD IntDefaultHandler ; GPIO Port Q1
+ DCD IntDefaultHandler ; GPIO Port Q2
+ DCD IntDefaultHandler ; GPIO Port Q3
+ DCD IntDefaultHandler ; GPIO Port Q4
+ DCD IntDefaultHandler ; GPIO Port Q5
+ DCD IntDefaultHandler ; GPIO Port Q6
+ DCD IntDefaultHandler ; GPIO Port Q7
+ DCD IntDefaultHandler ; GPIO Port R
+ DCD IntDefaultHandler ; GPIO Port S
+ DCD IntDefaultHandler ; PWM 1 Generator 0
+ DCD IntDefaultHandler ; PWM 1 Generator 1
+ DCD IntDefaultHandler ; PWM 1 Generator 2
+ DCD IntDefaultHandler ; PWM 1 Generator 3
+ DCD IntDefaultHandler ; PWM 1 Fault
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor first starts execution
+; following a reset event.
+;
+;******************************************************************************
+ EXPORT Reset_Handler
+Reset_Handler
+ ;
+ ; Enable the floating-point unit. This must be done here to handle the
+ ; case where main() uses floating-point and the function prologue saves
+ ; floating-point registers (which will fault if floating-point is not
+ ; enabled). Any configuration of the floating-point unit using
+ ; DriverLib APIs must be done here prior to the floating-point unit
+ ; being enabled.
+ ;
+ ; Note that this does not use DriverLib since it might not be included
+ ; in this project.
+ ;
+ MOVW R0, #0xED88
+ MOVT R0, #0xE000
+ LDR R1, [R0]
+ ORR R1, #0x00F00000
+ STR R1, [R0]
+
+ ;
+ ; Call the C library enty point that handles startup. This will copy
+ ; the .data section initializers from flash to SRAM and zero fill the
+ ; .bss section.
+ ;
+ IMPORT __main
+ B __main
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives a NMI. This
+; simply enters an infinite loop, preserving the system state for examination
+; by a debugger.
+;
+;******************************************************************************
+NmiSR
+ B NmiSR
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives a fault
+; interrupt. This simply enters an infinite loop, preserving the system state
+; for examination by a debugger.
+;
+;******************************************************************************
+FaultISR
+ B FaultISR
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives an unexpected
+; interrupt. This simply enters an infinite loop, preserving the system state
+; for examination by a debugger.
+;
+;******************************************************************************
+IntDefaultHandler
+ B IntDefaultHandler
+
+;******************************************************************************
+;
+; Make sure the end of this section is aligned.
+;
+;******************************************************************************
+ ALIGN
+
+;******************************************************************************
+;
+; Some code in the normal code section for initializing the heap and stack.
+;
+;******************************************************************************
+ AREA |.text|, CODE, READONLY
+
+;******************************************************************************
+;
+; The function expected of the C library startup code for defining the stack
+; and heap memory locations. For the C library version of the startup code,
+; provide this function so that the C library initialization code can find out
+; the location of the stack and heap.
+;
+;******************************************************************************
+ IF :DEF: __MICROLIB
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+ ELSE
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+__user_initial_stackheap
+ LDR R0, =HeapMem
+ LDR R1, =(StackMem + Stack)
+ LDR R2, =(HeapMem + Heap)
+ LDR R3, =StackMem
+ BX LR
+ ENDIF
+
+;******************************************************************************
+;
+; Make sure the end of this section is aligned.
+;
+;******************************************************************************
+ ALIGN
+
+;******************************************************************************
+;
+; Tell the assembler that we're done.
+;
+;******************************************************************************
+ END
diff --git a/boards/ek-tm4c123gxl/usb_dev_bulk/usb_bulk_structs.c b/boards/ek-tm4c123gxl/usb_dev_bulk/usb_bulk_structs.c new file mode 100644 index 0000000..2498297 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_bulk/usb_bulk_structs.c @@ -0,0 +1,200 @@ +//*****************************************************************************
+//
+// usb_bulk_structs.c - Data structures defining this bulk USB device.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "inc/hw_types.h"
+#include "driverlib/usb.h"
+#include "usblib/usblib.h"
+#include "usblib/usb-ids.h"
+#include "usblib/device/usbdevice.h"
+#include "usblib/device/usbdbulk.h"
+#include "usb_bulk_structs.h"
+
+//*****************************************************************************
+//
+// The languages supported by this device.
+//
+//*****************************************************************************
+const uint8_t g_pui8LangDescriptor[] =
+{
+ 4,
+ USB_DTYPE_STRING,
+ USBShort(USB_LANG_EN_US)
+};
+
+//*****************************************************************************
+//
+// The manufacturer string.
+//
+//*****************************************************************************
+const uint8_t g_pui8ManufacturerString[] =
+{
+ (17 + 1) * 2,
+ USB_DTYPE_STRING,
+ 'T', 0, 'e', 0, 'x', 0, 'a', 0, 's', 0, ' ', 0, 'I', 0, 'n', 0, 's', 0,
+ 't', 0, 'r', 0, 'u', 0, 'm', 0, 'e', 0, 'n', 0, 't', 0, 's', 0,
+};
+
+//*****************************************************************************
+//
+// The product string.
+//
+//*****************************************************************************
+const uint8_t g_pui8ProductString[] =
+{
+ (19 + 1) * 2,
+ USB_DTYPE_STRING,
+ 'G', 0, 'e', 0, 'n', 0, 'e', 0, 'r', 0, 'i', 0, 'c', 0, ' ', 0, 'B', 0,
+ 'u', 0, 'l', 0, 'k', 0, ' ', 0, 'D', 0, 'e', 0, 'v', 0, 'i', 0, 'c', 0,
+ 'e', 0
+};
+
+//*****************************************************************************
+//
+// The serial number string.
+//
+//*****************************************************************************
+const uint8_t g_pui8SerialNumberString[] =
+{
+ (8 + 1) * 2,
+ USB_DTYPE_STRING,
+ '1', 0, '2', 0, '3', 0, '4', 0, '5', 0, '6', 0, '7', 0, '8', 0
+};
+
+//*****************************************************************************
+//
+// The data interface description string.
+//
+//*****************************************************************************
+const uint8_t g_pui8DataInterfaceString[] =
+{
+ (19 + 1) * 2,
+ USB_DTYPE_STRING,
+ 'B', 0, 'u', 0, 'l', 0, 'k', 0, ' ', 0, 'D', 0, 'a', 0, 't', 0,
+ 'a', 0, ' ', 0, 'I', 0, 'n', 0, 't', 0, 'e', 0, 'r', 0, 'f', 0,
+ 'a', 0, 'c', 0, 'e', 0
+};
+
+//*****************************************************************************
+//
+// The configuration description string.
+//
+//*****************************************************************************
+const uint8_t g_pui8ConfigString[] =
+{
+ (23 + 1) * 2,
+ USB_DTYPE_STRING,
+ 'B', 0, 'u', 0, 'l', 0, 'k', 0, ' ', 0, 'D', 0, 'a', 0, 't', 0,
+ 'a', 0, ' ', 0, 'C', 0, 'o', 0, 'n', 0, 'f', 0, 'i', 0, 'g', 0,
+ 'u', 0, 'r', 0, 'a', 0, 't', 0, 'i', 0, 'o', 0, 'n', 0
+};
+
+//*****************************************************************************
+//
+// The descriptor string table.
+//
+//*****************************************************************************
+const uint8_t * const g_ppui8StringDescriptors[] =
+{
+ g_pui8LangDescriptor,
+ g_pui8ManufacturerString,
+ g_pui8ProductString,
+ g_pui8SerialNumberString,
+ g_pui8DataInterfaceString,
+ g_pui8ConfigString
+};
+
+#define NUM_STRING_DESCRIPTORS (sizeof(g_ppui8StringDescriptors) / \
+ sizeof(uint8_t *))
+
+//*****************************************************************************
+//
+// The bulk device initialization and customization structures. In this case,
+// we are using USBBuffers between the bulk device class driver and the
+// application code. The function pointers and callback data values are set
+// to insert a buffer in each of the data channels, transmit and receive.
+//
+// With the buffer in place, the bulk channel callback is set to the relevant
+// channel function and the callback data is set to point to the channel
+// instance data. The buffer, in turn, has its callback set to the application
+// function and the callback data set to our bulk instance structure.
+//
+//*****************************************************************************
+extern const tUSBBuffer g_sTxBuffer;
+extern const tUSBBuffer g_sRxBuffer;
+
+tUSBDBulkDevice g_sBulkDevice =
+{
+ USB_VID_TI_1CBE,
+ USB_PID_BULK,
+ 500,
+ USB_CONF_ATTR_SELF_PWR,
+ USBBufferEventCallback,
+ (void *)&g_sRxBuffer,
+ USBBufferEventCallback,
+ (void *)&g_sTxBuffer,
+ g_ppui8StringDescriptors,
+ NUM_STRING_DESCRIPTORS
+};
+
+//*****************************************************************************
+//
+// Receive buffer (from the USB perspective).
+//
+//*****************************************************************************
+uint8_t g_pui8USBRxBuffer[BULK_BUFFER_SIZE];
+uint8_t g_pui8RxBufferWorkspace[USB_BUFFER_WORKSPACE_SIZE];
+const tUSBBuffer g_sRxBuffer =
+{
+ false, // This is a receive buffer.
+ RxHandler, // pfnCallback
+ (void *)&g_sBulkDevice, // Callback data is our device pointer.
+ USBDBulkPacketRead, // pfnTransfer
+ USBDBulkRxPacketAvailable, // pfnAvailable
+ (void *)&g_sBulkDevice, // pvHandle
+ g_pui8USBRxBuffer, // pi8Buffer
+ BULK_BUFFER_SIZE, // ui32BufferSize
+ g_pui8RxBufferWorkspace // pvWorkspace
+};
+
+//*****************************************************************************
+//
+// Transmit buffer (from the USB perspective).
+//
+//*****************************************************************************
+uint8_t g_pui8USBTxBuffer[BULK_BUFFER_SIZE];
+uint8_t g_pui8TxBufferWorkspace[USB_BUFFER_WORKSPACE_SIZE];
+const tUSBBuffer g_sTxBuffer =
+{
+ true, // This is a transmit buffer.
+ TxHandler, // pfnCallback
+ (void *)&g_sBulkDevice, // Callback data is our device pointer.
+ USBDBulkPacketWrite, // pfnTransfer
+ USBDBulkTxPacketAvailable, // pfnAvailable
+ (void *)&g_sBulkDevice, // pvHandle
+ g_pui8USBTxBuffer, // pi8Buffer
+ BULK_BUFFER_SIZE, // ui32BufferSize
+ g_pui8TxBufferWorkspace // pvWorkspace
+};
diff --git a/boards/ek-tm4c123gxl/usb_dev_bulk/usb_bulk_structs.h b/boards/ek-tm4c123gxl/usb_dev_bulk/usb_bulk_structs.h new file mode 100644 index 0000000..db5b1f6 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_bulk/usb_bulk_structs.h @@ -0,0 +1,48 @@ +//*****************************************************************************
+//
+// usb_bulk_structs.h - Data structures defining this bulk USB device.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#ifndef _USB_BULK_STRUCTS_H_
+#define _USB_BULK_STRUCTS_H_
+
+//*****************************************************************************
+//
+// The size of the transmit and receive buffers used. 256 is chosen pretty
+// much at random though the buffer should be at least twice the size of
+// a maximum-sized USB packet.
+//
+//*****************************************************************************
+#define BULK_BUFFER_SIZE 256
+
+extern uint32_t RxHandler(void *pvCBData, uint32_t ui32Event,
+ uint32_t ui32MsgValue, void *pvMsgData);
+extern uint32_t TxHandler(void *pvi32CBData, uint32_t ui32Event,
+ uint32_t ui32MsgValue, void *pvMsgData);
+
+extern const tUSBBuffer g_sTxBuffer;
+extern const tUSBBuffer g_sRxBuffer;
+extern tUSBDBulkDevice g_sBulkDevice;
+extern uint8_t g_pui8USBTxBuffer[];
+extern uint8_t g_pui8USBRxBuffer[];
+
+#endif
diff --git a/boards/ek-tm4c123gxl/usb_dev_bulk/usb_dev_bulk.c b/boards/ek-tm4c123gxl/usb_dev_bulk/usb_dev_bulk.c new file mode 100644 index 0000000..e532888 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_bulk/usb_dev_bulk.c @@ -0,0 +1,644 @@ +//*****************************************************************************
+//
+// usb_dev_bulk.c - Main routines for the generic bulk device example.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdbool.h>
+#include <stdint.h>
+#include "inc/hw_ints.h"
+#include "inc/hw_memmap.h"
+#include "inc/hw_types.h"
+#include "driverlib/debug.h"
+#include "driverlib/fpu.h"
+#include "driverlib/gpio.h"
+#include "driverlib/interrupt.h"
+#include "driverlib/pin_map.h"
+#include "driverlib/sysctl.h"
+#include "driverlib/systick.h"
+#include "driverlib/timer.h"
+#include "driverlib/uart.h"
+#include "driverlib/rom.h"
+#include "usblib/usblib.h"
+#include "usblib/usb-ids.h"
+#include "usblib/device/usbdevice.h"
+#include "usblib/device/usbdbulk.h"
+#include "utils/uartstdio.h"
+#include "utils/ustdlib.h"
+#include "usb_bulk_structs.h"
+
+//*****************************************************************************
+//
+//! \addtogroup example_list
+//! <h1>USB Generic Bulk Device (usb_dev_bulk)</h1>
+//!
+//! This example provides a generic USB device offering simple bulk data
+//! transfer to and from the host. The device uses a vendor-specific class ID
+//! and supports a single bulk IN endpoint and a single bulk OUT endpoint.
+//! Data received from the host is assumed to be ASCII text and it is
+//! echoed back with the case of all alphabetic characters swapped.
+//!
+//! A Windows INF file for the device is provided on the installation CD and
+//! in the C:/ti/TivaWare-for-C-Series/windows_drivers directory of TivaWare C
+//! series releases. This INF contains information required to install the
+//! WinUSB subsystem on Windowi16XP and Vista PCs. WinUSB is a Windows
+//! subsystem allowing user mode applications to access the USB device without
+//! the need for a vendor-specific kernel mode driver.
+//!
+//! A sample Windows command-line application, usb_bulk_example, illustrating
+//! how to connect to and communicate with the bulk device is also provided.
+//! The application binary is installed as part of the ''Windows-side examples
+//! for USB kits'' package (SW-USB-win) on the installation CD or via download
+//! from http://www.ti.com/tivaware . Project files are included to allow
+//! the examples to be built using Microsoft VisualStudio 2008. Source code
+//! for this application can be found in directory
+//! TivaWare-for-C-Series/tools/usb_bulk_example.
+//
+//*****************************************************************************
+
+//*****************************************************************************
+//
+// The system tick rate expressed both as ticks per second and a millisecond
+// period.
+//
+//*****************************************************************************
+#define SYSTICKS_PER_SECOND 100
+#define SYSTICK_PERIOD_MS (1000 / SYSTICKS_PER_SECOND)
+
+//*****************************************************************************
+//
+// The global system tick counter.
+//
+//*****************************************************************************
+volatile uint32_t g_ui32SysTickCount = 0;
+
+//*****************************************************************************
+//
+// Variables tracking transmit and receive counts.
+//
+//*****************************************************************************
+volatile uint32_t g_ui32TxCount = 0;
+volatile uint32_t g_ui32RxCount = 0;
+#ifdef DEBUG
+uint32_t g_ui32UARTRxErrors = 0;
+#endif
+
+//*****************************************************************************
+//
+// Debug-related definitions and declarations.
+//
+// Debug output is available via UART0 if DEBUG is defined during build.
+//
+//*****************************************************************************
+#ifdef DEBUG
+//*****************************************************************************
+//
+// Map all debug print calls to UARTprintf in debug builds.
+//
+//*****************************************************************************
+#define DEBUG_PRINT UARTprintf
+
+#else
+
+//*****************************************************************************
+//
+// Compile out all debug print calls in release builds.
+//
+//*****************************************************************************
+#define DEBUG_PRINT while(0) ((int (*)(char *, ...))0)
+#endif
+
+//*****************************************************************************
+//
+// Flags used to pass commands from interrupt context to the main loop.
+//
+//*****************************************************************************
+#define COMMAND_PACKET_RECEIVED 0x00000001
+#define COMMAND_STATUS_UPDATE 0x00000002
+
+volatile uint32_t g_ui32Flags = 0;
+
+//*****************************************************************************
+//
+// Global flag indicating that a USB configuration has been set.
+//
+//*****************************************************************************
+static volatile bool g_bUSBConfigured = false;
+
+//*****************************************************************************
+//
+// The error routine that is called if the driver library encounters an error.
+//
+//*****************************************************************************
+#ifdef DEBUG
+void
+__error__(char *pcFilename, uint32_t ui32Line)
+{
+ UARTprintf("Error at line %d of %s\n", ui32Line, pcFilename);
+ while(1)
+ {
+ }
+}
+#endif
+
+//*****************************************************************************
+//
+// Interrupt handler for the system tick counter.
+//
+//*****************************************************************************
+void
+SysTickIntHandler(void)
+{
+ //
+ // Update our system tick counter.
+ //
+ g_ui32SysTickCount++;
+}
+
+//*****************************************************************************
+//
+// Receive new data and echo it back to the host.
+//
+// \param psDevice points to the instance data for the device whose data is to
+// be processed.
+// \param pui8Data points to the newly received data in the USB receive buffer.
+// \param ui32NumBytes is the number of bytes of data available to be processed.
+//
+// This function is called whenever we receive a notification that data is
+// available from the host. We read the data, byte-by-byte and swap the case
+// of any alphabetical characters found then write it back out to be
+// transmitted back to the host.
+//
+// \return Returns the number of bytes of data processed.
+//
+//*****************************************************************************
+static uint32_t
+EchoNewDataToHost(tUSBDBulkDevice *psDevice, uint8_t *pui8Data,
+ uint32_t ui32NumBytes)
+{
+ uint32_t ui32Loop, ui32Space, ui32Count;
+ uint32_t ui32ReadIndex;
+ uint32_t ui32WriteIndex;
+ tUSBRingBufObject sTxRing;
+
+ //
+ // Get the current buffer information to allow us to write directly to
+ // the transmit buffer (we already have enough information from the
+ // parameters to access the receive buffer directly).
+ //
+ USBBufferInfoGet(&g_sTxBuffer, &sTxRing);
+
+ //
+ // How much space is there in the transmit buffer?
+ //
+ ui32Space = USBBufferSpaceAvailable(&g_sTxBuffer);
+
+ //
+ // How many characters can we process this time round?
+ //
+ ui32Loop = (ui32Space < ui32NumBytes) ? ui32Space : ui32NumBytes;
+ ui32Count = ui32Loop;
+
+ //
+ // Update our receive counter.
+ //
+ g_ui32RxCount += ui32NumBytes;
+
+ //
+ // Dump a debug message.
+ //
+ DEBUG_PRINT("Received %d bytes\n", ui32NumBytes);
+
+ //
+ // Set up to process the characters by directly accessing the USB buffers.
+ //
+ ui32ReadIndex = (uint32_t)(pui8Data - g_pui8USBRxBuffer);
+ ui32WriteIndex = sTxRing.ui32WriteIndex;
+
+ while(ui32Loop)
+ {
+ //
+ // Copy from the receive buffer to the transmit buffer converting
+ // character case on the way.
+ //
+
+ //
+ // Is this a lower case character?
+ //
+ if((g_pui8USBRxBuffer[ui32ReadIndex] >= 'a') &&
+ (g_pui8USBRxBuffer[ui32ReadIndex] <= 'z'))
+ {
+ //
+ // Convert to upper case and write to the transmit buffer.
+ //
+ g_pui8USBTxBuffer[ui32WriteIndex] =
+ (g_pui8USBRxBuffer[ui32ReadIndex] - 'a') + 'A';
+ }
+ else
+ {
+ //
+ // Is this an upper case character?
+ //
+ if((g_pui8USBRxBuffer[ui32ReadIndex] >= 'A') &&
+ (g_pui8USBRxBuffer[ui32ReadIndex] <= 'Z'))
+ {
+ //
+ // Convert to lower case and write to the transmit buffer.
+ //
+ g_pui8USBTxBuffer[ui32WriteIndex] =
+ (g_pui8USBRxBuffer[ui32ReadIndex] - 'Z') + 'z';
+ }
+ else
+ {
+ //
+ // Copy the received character to the transmit buffer.
+ //
+ g_pui8USBTxBuffer[ui32WriteIndex] =
+ g_pui8USBRxBuffer[ui32ReadIndex];
+ }
+ }
+
+ //
+ // Move to the next character taking care to adjust the pointer for
+ // the buffer wrap if necessary.
+ //
+ ui32WriteIndex++;
+ ui32WriteIndex = (ui32WriteIndex == BULK_BUFFER_SIZE) ?
+ 0 : ui32WriteIndex;
+
+ ui32ReadIndex++;
+ ui32ReadIndex = (ui32ReadIndex == BULK_BUFFER_SIZE) ?
+ 0 : ui32ReadIndex;
+
+ ui32Loop--;
+ }
+
+ //
+ // We've processed the data in place so now send the processed data
+ // back to the host.
+ //
+ USBBufferDataWritten(&g_sTxBuffer, ui32Count);
+
+ DEBUG_PRINT("Wrote %d bytes\n", ui32Count);
+
+ //
+ // We processed as much data as we can directly from the receive buffer so
+ // we need to return the number of bytes to allow the lower layer to
+ // update its read pointer appropriately.
+ //
+ return(ui32Count);
+}
+
+//*****************************************************************************
+//
+// Handles bulk driver notifications related to the transmit channel (data to
+// the USB host).
+//
+// \param pvCBData is the client-supplied callback pointer for this channel.
+// \param ui32Event identifies the event we are being notified about.
+// \param ui32MsgValue is an event-specific value.
+// \param pvMsgData is an event-specific pointer.
+//
+// This function is called by the bulk driver to notify us of any events
+// related to operation of the transmit data channel (the IN channel carrying
+// data to the USB host).
+//
+// \return The return value is event-specific.
+//
+//*****************************************************************************
+uint32_t
+TxHandler(void *pvCBData, uint32_t ui32Event, uint32_t ui32MsgValue,
+ void *pvMsgData)
+{
+ //
+ // We are not required to do anything in response to any transmit event
+ // in this example. All we do is update our transmit counter.
+ //
+ if(ui32Event == USB_EVENT_TX_COMPLETE)
+ {
+ g_ui32TxCount += ui32MsgValue;
+ }
+
+ //
+ // Dump a debug message.
+ //
+ DEBUG_PRINT("TX complete %d\n", ui32MsgValue);
+
+ return(0);
+}
+
+//*****************************************************************************
+//
+// Handles bulk driver notifications related to the receive channel (data from
+// the USB host).
+//
+// \param pvCBData is the client-supplied callback pointer for this channel.
+// \param ui32Event identifies the event we are being notified about.
+// \param ui32MsgValue is an event-specific value.
+// \param pvMsgData is an event-specific pointer.
+//
+// This function is called by the bulk driver to notify us of any events
+// related to operation of the receive data channel (the OUT channel carrying
+// data from the USB host).
+//
+// \return The return value is event-specific.
+//
+//*****************************************************************************
+uint32_t
+RxHandler(void *pvCBData, uint32_t ui32Event,
+ uint32_t ui32MsgValue, void *pvMsgData)
+{
+ //
+ // Which event are we being sent?
+ //
+ switch(ui32Event)
+ {
+ //
+ // We are connected to a host and communication is now possible.
+ //
+ case USB_EVENT_CONNECTED:
+ {
+ g_bUSBConfigured = true;
+ UARTprintf("Host connected.\n");
+
+ //
+ // Flush our buffers.
+ //
+ USBBufferFlush(&g_sTxBuffer);
+ USBBufferFlush(&g_sRxBuffer);
+
+ break;
+ }
+
+ //
+ // The host has disconnected.
+ //
+ case USB_EVENT_DISCONNECTED:
+ {
+ g_bUSBConfigured = false;
+ UARTprintf("Host disconnected.\n");
+ break;
+ }
+
+ //
+ // A new packet has been received.
+ //
+ case USB_EVENT_RX_AVAILABLE:
+ {
+ tUSBDBulkDevice *psDevice;
+
+ //
+ // Get a pointer to our instance data from the callback data
+ // parameter.
+ //
+ psDevice = (tUSBDBulkDevice *)pvCBData;
+
+ //
+ // Read the new packet and echo it back to the host.
+ //
+ return(EchoNewDataToHost(psDevice, pvMsgData, ui32MsgValue));
+ }
+
+ //
+ // Ignore SUSPEND and RESUME for now.
+ //
+ case USB_EVENT_SUSPEND:
+ case USB_EVENT_RESUME:
+ {
+ break;
+ }
+
+ //
+ // Ignore all other events and return 0.
+ //
+ default:
+ {
+ break;
+ }
+ }
+
+ return(0);
+}
+
+//*****************************************************************************
+//
+// Configure the UART and its pins. This must be called before UARTprintf().
+//
+//*****************************************************************************
+void
+ConfigureUART(void)
+{
+ //
+ // Enable the GPIO Peripheral used by the UART.
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOA);
+
+ //
+ // Enable UART0
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_UART0);
+
+ //
+ // Configure GPIO Pins for UART mode.
+ //
+ ROM_GPIOPinConfigure(GPIO_PA0_U0RX);
+ ROM_GPIOPinConfigure(GPIO_PA1_U0TX);
+ ROM_GPIOPinTypeUART(GPIO_PORTA_BASE, GPIO_PIN_0 | GPIO_PIN_1);
+
+ //
+ // Use the internal 16MHz oscillator as the UART clock source.
+ //
+ UARTClockSourceSet(UART0_BASE, UART_CLOCK_PIOSC);
+
+ //
+ // Initialize the UART for console I/O.
+ //
+ UARTStdioConfig(0, 115200, 16000000);
+}
+
+//*****************************************************************************
+//
+// This is the main application entry function.
+//
+//*****************************************************************************
+int
+main(void)
+{
+ volatile uint32_t ui32Loop;
+ uint32_t ui32TxCount;
+ uint32_t ui32RxCount;
+
+ //
+ // Enable lazy stacking for interrupt handlers. This allows floating-point
+ // instructions to be used within interrupt handlers, but at the expense of
+ // extra stack usage.
+ //
+ ROM_FPULazyStackingEnable();
+
+ //
+ // Set the clocking to run from the PLL at 50MHz
+ //
+ ROM_SysCtlClockSet(SYSCTL_SYSDIV_4 | SYSCTL_USE_PLL | SYSCTL_OSC_MAIN |
+ SYSCTL_XTAL_16MHZ);
+
+ //
+ // Enable the GPIO port that is used for the on-board LED.
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOF);
+
+ //
+ // Enable the GPIO pins for the LED (PF2 & PF3).
+ //
+ ROM_GPIOPinTypeGPIOOutput(GPIO_PORTF_BASE, GPIO_PIN_3 | GPIO_PIN_2);
+
+ //
+ // Open UART0 and show the application name on the UART.
+ //
+ ConfigureUART();
+
+ UARTprintf("\033[2JTiva C Series USB bulk device example\n");
+ UARTprintf("---------------------------------\n\n");
+
+ //
+ // Not configured initially.
+ //
+ g_bUSBConfigured = false;
+
+ //
+ // Enable the GPIO peripheral used for USB, and configure the USB
+ // pins.
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOD);
+ ROM_GPIOPinTypeUSBAnalog(GPIO_PORTD_BASE, GPIO_PIN_4 | GPIO_PIN_5);
+
+ //
+ // Enable the system tick.
+ //
+ ROM_SysTickPeriodSet(ROM_SysCtlClockGet() / SYSTICKS_PER_SECOND);
+ ROM_SysTickIntEnable();
+ ROM_SysTickEnable();
+
+ //
+ // Tell the user what we are up to.
+ //
+ UARTprintf("Configuring USB\n");
+
+ //
+ // Initialize the transmit and receive buffers.
+ //
+ USBBufferInit(&g_sTxBuffer);
+ USBBufferInit(&g_sRxBuffer);
+
+ //
+ // Set the USB stack mode to Device mode with VBUS monitoring.
+ //
+ USBStackModeSet(0, eUSBModeForceDevice, 0);
+
+ //
+ // Pass our device information to the USB library and place the device
+ // on the bus.
+ //
+ USBDBulkInit(0, &g_sBulkDevice);
+
+ //
+ // Wait for initial configuration to complete.
+ //
+ UARTprintf("Waiting for host...\n");
+
+ //
+ // Clear our local byte counters.
+ //
+ ui32RxCount = 0;
+ ui32TxCount = 0;
+
+ //
+ // Main application loop.
+ //
+ while(1)
+ {
+ //
+ // See if any data has been transferred.
+ //
+ if((ui32TxCount != g_ui32TxCount) || (ui32RxCount != g_ui32RxCount))
+ {
+ //
+ // Has there been any transmit traffic since we last checked?
+ //
+ if(ui32TxCount != g_ui32TxCount)
+ {
+ //
+ // Turn on the Green LED.
+ //
+ GPIOPinWrite(GPIO_PORTF_BASE, GPIO_PIN_3, GPIO_PIN_3);
+
+ //
+ // Delay for a bit.
+ //
+ for(ui32Loop = 0; ui32Loop < 150000; ui32Loop++)
+ {
+ }
+
+ //
+ // Turn off the Green LED.
+ //
+ GPIOPinWrite(GPIO_PORTF_BASE, GPIO_PIN_3, 0);
+
+ //
+ // Take a snapshot of the latest transmit count.
+ //
+ ui32TxCount = g_ui32TxCount;
+ }
+
+ //
+ // Has there been any receive traffic since we last checked?
+ //
+ if(ui32RxCount != g_ui32RxCount)
+ {
+ //
+ // Turn on the Blue LED.
+ //
+ GPIOPinWrite(GPIO_PORTF_BASE, GPIO_PIN_2, GPIO_PIN_2);
+
+ //
+ // Delay for a bit.
+ //
+ for(ui32Loop = 0; ui32Loop < 150000; ui32Loop++)
+ {
+ }
+
+ //
+ // Turn off the Blue LED.
+ //
+ GPIOPinWrite(GPIO_PORTF_BASE, GPIO_PIN_2, 0);
+
+ //
+ // Take a snapshot of the latest receive count.
+ //
+ ui32RxCount = g_ui32RxCount;
+ }
+
+ //
+ // Update the display of bytes transferred.
+ //
+ UARTprintf("\rTx: %d Rx: %d", ui32TxCount, ui32RxCount);
+ }
+ }
+}
diff --git a/boards/ek-tm4c123gxl/usb_dev_bulk/usb_dev_bulk.ewd b/boards/ek-tm4c123gxl/usb_dev_bulk/usb_dev_bulk.ewd new file mode 100644 index 0000000..7a32408 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_bulk/usb_dev_bulk.ewd @@ -0,0 +1,614 @@ +<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+ <fileVersion>1</fileVersion>
+ <configuration>
+ <name>Debug</name>
+ <toolchain>
+ <name>ARM</name>
+ </toolchain>
+ <debug>1</debug>
+ <settings>
+ <name>C-SPY</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>15</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CInput</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CEndian</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCVariant</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>MemOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MemFile</name>
+ <state>$TOOLKIT_DIR$\CONFIG\debugger\TexasInstruments\tm4c123gh6pm</state>
+ </option>
+ <option>
+ <name>RunToEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>RunToName</name>
+ <state>main</state>
+ </option>
+ <option>
+ <name>CExtraOptionsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCDDFArgumentProducer</name>
+ <state></state>
+ </option>
+ <option>
+ <name>OCDownloadSuppressDownload</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDownloadVerifyAll</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OCDynDriverList</name>
+ <state>LMIFTDI_ID</state>
+ </option>
+ <option>
+ <name>OCLastSavedByProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OCDownloadAttachToProgram</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FlashLoaders</name>
+ <state>,,,,(default),</state>
+ </option>
+ <option>
+ <name>UseFlashLoader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CLowLevel</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCBE8Slave</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ARMSIM_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCSimDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCSimEnablePSP</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCSimPspOverrideConfig</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCSimPspConfigFile</name>
+ <state></state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ANGEL_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CCAngelHeartbeat</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CAngelCommunication</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CAngelCommBaud</name>
+ <version>0</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>CAngelCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ANGELTCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoAngelLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AngelLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>GDBSERVER_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>TCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>LogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCJTagBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>IARROM_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CRomLogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomLogFileEditB</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CRomCommunication</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomCommBaud</name>
+ <version>0</version>
+ <state>7</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>JLINK_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>9</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>JLinkSpeed</name>
+ <state>32</state>
+ </option>
+ <option>
+ <name>CCJLinkDoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCJLinkHWResetDelay</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>JLinkInitialSpeed</name>
+ <state>32</state>
+ </option>
+ <option>
+ <name>CCDoJlinkMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCScanChainNonARMDevices</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkIRLength</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkCommRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkTCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>CCJLinkSpeedRadioV2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCUSBDevice</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchUndef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchSWI</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchData</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchPrefetch</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchIRQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchFIQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ <option>
+ <name>CCJLinkInterfaceRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCJLinkAttachSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCJLinkResetList</name>
+ <version>0</version>
+ <state>5</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>LMIFTDI_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>LmiftdiSpeed</name>
+ <state>500</state>
+ </option>
+ <option>
+ <name>CCLmiftdiDoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCLmiftdiLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>MACRAIGOR_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>2</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>jtag</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>EmuSpeed</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>TCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>LogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>DoEmuMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>EmuMultiTarget</name>
+ <state>0@ARM7TDMI</state>
+ </option>
+ <option>
+ <name>EmuHWReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CEmuCommBaud</name>
+ <version>0</version>
+ <state>4</state>
+ </option>
+ <option>
+ <name>CEmuCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>jtago</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>UnusedAddr</name>
+ <state>0x00800000</state>
+ </option>
+ <option>
+ <name>CCMacraigorHWResetDelay</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCJTagBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>RDI_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CRDIDriverDll</name>
+ <state>Browse to your RDI driver</state>
+ </option>
+ <option>
+ <name>CRDILogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRDILogFileEdit</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCRDIHWReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchUndef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchSWI</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchData</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchPrefetch</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchIRQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchFIQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDIUseETM</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>THIRDPARTY_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CThirdPartyDriverDll</name>
+ <state>Browse to your third-party driver</state>
+ </option>
+ <option>
+ <name>CThirdPartyLogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CThirdPartyLogFileEditB</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <debuggerPlugins>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\OSE\OseEpsilonPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Profiling\Profiling.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ </debuggerPlugins>
+ </configuration>
+</project>
diff --git a/boards/ek-tm4c123gxl/usb_dev_bulk/usb_dev_bulk.ewp b/boards/ek-tm4c123gxl/usb_dev_bulk/usb_dev_bulk.ewp new file mode 100644 index 0000000..883eeaf --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_bulk/usb_dev_bulk.ewp @@ -0,0 +1,797 @@ +<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+ <fileVersion>1</fileVersion>
+ <configuration>
+ <name>Debug</name>
+ <toolchain>
+ <name>ARM</name>
+ </toolchain>
+ <debug>1</debug>
+ <settings>
+ <name>General</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <version>14</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>ExePath</name>
+ <state>ewarm\Exe</state>
+ </option>
+ <option>
+ <name>ObjPath</name>
+ <state>ewarm\Obj</state>
+ </option>
+ <option>
+ <name>ListPath</name>
+ <state>ewarm\List</state>
+ </option>
+ <option>
+ <name>Variant</name>
+ <version>19</version>
+ <state>39</state>
+ </option>
+ <option>
+ <name>GEndianMode</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>Input variant</name>
+ <version>1</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>Input description</name>
+ <state>No specifier n, no float nor long long, no scan set, no assignment suppressing.</state>
+ </option>
+ <option>
+ <name>Output variant</name>
+ <version>0</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>Output description</name>
+ <state>No specifier a, A, no specifier n, no float nor long long, no flags.</state>
+ </option>
+ <option>
+ <name>GOutputBinary</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FPU</name>
+ <version>2</version>
+ <state>5</state>
+ </option>
+ <option>
+ <name>OGCoreOrChip</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelect</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelectSlave</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>RTDescription</name>
+ <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+ </option>
+ <option>
+ <name>RTConfigPath</name>
+ <state>$TOOLKIT_DIR$\INC\DLib_Config_Normal.h</state>
+ </option>
+ <option>
+ <name>OGProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OGLastSavedByProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>GeneralMisraRules</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>GeneralEnableMisra</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GeneralMisraVerbose</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGChipSelectEditMenu</name>
+ <state>TM4C123GH6PM TexasInstruments TM4C123GH6PM</state>
+ </option>
+ <option>
+ <name>GenLowLevelInterface</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GEndianModeBE</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OGBufferedTerminalOutput</name>
+ <state>0</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ICCARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>19</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CCDefines</name>
+ <state>ewarm</state>
+ <state>PART_TM4C123GH6PM</state>
+ <state>TARGET_IS_TM4C123_RB1</state>
+ <state>UART_BUFFERED</state>
+ </option>
+ <option>
+ <name>CCPreprocFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocComments</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMnemonics</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMessages</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssSource</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagSuppress</name>
+ <state>Pa050</state>
+ </option>
+ <option>
+ <name>CCDiagRemark</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCDiagWarning</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCDiagError</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCAllowList</name>
+ <version>1</version>
+ <state>1111111</state>
+ </option>
+ <option>
+ <name>CCDebugInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IEndianMode</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IExtraOptionsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCLangConformance</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCSignedPlainChar</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCRequirePrototypes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagWarnAreErr</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCCompilerRuntimeInfo</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OutputFile</name>
+ <state>$FILE_BNAME$.o</state>
+ </option>
+ <option>
+ <name>CCLangSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCLibConfigHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>PreInclude</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CompilerMisraRules</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>CompilerMisraOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCIncludePath2</name>
+ <state>$PROJ_DIR$\..\..\..\..</state>
+ </option>
+ <option>
+ <name>CCStdIncCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCStdIncludePath</name>
+ <state>$TOOLKIT_DIR$\INC\</state>
+ </option>
+ <option>
+ <name>CCCodeSection</name>
+ <state>.text</state>
+ </option>
+ <option>
+ <name>IInterwork2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IProcessorMode2</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptLevel</name>
+ <state>3</state>
+ </option>
+ <option>
+ <name>CCOptStrategy</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptLevelSlave</name>
+ <state>3</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>AARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>7</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>AObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AEndian</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>ACaseSensitivity</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacroChars</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnEnable</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnWhat</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnOne</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AWarnRange1</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AWarnRange2</name>
+ <state></state>
+ </option>
+ <option>
+ <name>ADebug</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AltRegisterNames</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ADefines</name>
+ <state>ewarm</state>
+ </option>
+ <option>
+ <name>AList</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AListHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AListing</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>Includes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacDefs</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacExps</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacExec</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OnlyAssed</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MultiLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLengthCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLength</name>
+ <state>80</state>
+ </option>
+ <option>
+ <name>TabSpacing</name>
+ <state>8</state>
+ </option>
+ <option>
+ <name>AXRef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDefines</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefInternal</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDual</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AOutputFile</name>
+ <state>$FILE_BNAME$.o</state>
+ </option>
+ <option>
+ <name>AMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ALimitErrorsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ALimitErrorsEdit</name>
+ <state>100</state>
+ </option>
+ <option>
+ <name>AIgnoreStdInclude</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AStdIncludes</name>
+ <state>$TOOLKIT_DIR$\INC\</state>
+ </option>
+ <option>
+ <name>AUserIncludes</name>
+ <state>$PROJ_DIR$\..\..\..\..</state>
+ </option>
+ <option>
+ <name>AExtraOptionsCheckV2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AExtraOptionsV2</name>
+ <state></state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>OBJCOPY</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OOCOutputFormat</name>
+ <version>1</version>
+ <state>2</state>
+ </option>
+ <option>
+ <name>OCOutputOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OOCOutputFile</name>
+ <state>usb_dev_bulk.bin</state>
+ </option>
+ <option>
+ <name>OOCCommandLineProducer</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OOCObjCopyEnable</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>CUSTOM</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <extensions></extensions>
+ <cmdline></cmdline>
+ </data>
+ </settings>
+ <settings>
+ <name>BICOMP</name>
+ <archiveVersion>0</archiveVersion>
+ <data/>
+ </settings>
+ <settings>
+ <name>BUILDACTION</name>
+ <archiveVersion>1</archiveVersion>
+ <data>
+ <prebuild></prebuild>
+ <postbuild></postbuild>
+ </data>
+ </settings>
+ <settings>
+ <name>ILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>5</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>IlinkLibIOConfig</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>XLinkMisraHandler</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkInputFileSlave</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkOutputFile</name>
+ <state>usb_dev_bulk.out</state>
+ </option>
+ <option>
+ <name>IlinkDebugInfoEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkKeepSymbols</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinaryFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinarySymbol</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinarySegment</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinaryAlign</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkDefines</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkConfigDefines</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkMapFile</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkLogFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogInitialization</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogModule</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogSection</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogVeneer</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkIcfOverride</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkIcfFile</name>
+ <state>$PROJ_DIR$\usb_dev_bulk.icf</state>
+ </option>
+ <option>
+ <name>IlinkIcfFileSlave</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkSuppressDiags</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsRem</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsWarn</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsErr</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkWarningsAreErrors</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkUseExtraOptions</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkLowLevelInterfaceSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAutoLibEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAdditionalLibs</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkOverrideProgramEntryLabel</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabelSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabel</name>
+ <state>__iar_program_start</state>
+ </option>
+ <option>
+ <name>IlinkNXPLPCChecksum</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>DoFill</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FillerByte</name>
+ <state>0xFF</state>
+ </option>
+ <option>
+ <name>FillerStart</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>FillerEnd</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>CrcSize</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcAlign</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcAlgo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcPoly</name>
+ <state>0x11021</state>
+ </option>
+ <option>
+ <name>CrcCompl</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcBitOrder</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcInitialValue</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>DoCrc</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkBE8Slave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkBufferedTerminalOutput</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>IARCHIVE</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>IarchiveInputs</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IarchiveOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IarchiveOutput</name>
+ <state>###Unitialized###</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>BILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data/>
+ </settings>
+ </configuration>
+ <group>
+ <name>Libraries</name>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\driverlib\ewarm\Exe\driverlib.a</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\usblib\ewarm\Exe\usblib.a</name>
+ </file>
+ </group>
+ <group>
+ <name>Source</name>
+ <file>
+ <name>$PROJ_DIR$\startup_ewarm.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\utils\uartstdio.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\usb_bulk_structs.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\usb_dev_bulk.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\utils\ustdlib.c</name>
+ </file>
+ </group>
+</project>
diff --git a/boards/ek-tm4c123gxl/usb_dev_bulk/usb_dev_bulk.icf b/boards/ek-tm4c123gxl/usb_dev_bulk/usb_dev_bulk.icf new file mode 100644 index 0000000..0630e78 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_bulk/usb_dev_bulk.icf @@ -0,0 +1,78 @@ +//*****************************************************************************
+//
+// usb_dev_bulk.icf - Linker configuration file for usb_dev_bulk.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+//
+// Define a memory region that covers the entire 4 GB addressible space of the
+// processor.
+//
+define memory mem with size = 4G;
+
+//
+// Define a region for the on-chip flash.
+//
+define region FLASH = mem:[from 0x00000000 to 0x0003ffff];
+
+//
+// Define a region for the on-chip SRAM.
+//
+define region SRAM = mem:[from 0x20000000 to 0x20007fff];
+
+//
+// Define a block for the heap. The size should be set to something other
+// than zero if things in the C library that require the heap are used.
+//
+define block HEAP with alignment = 8, size = 0x00000000 { };
+
+//
+// Indicate that the read/write values should be initialized by copying from
+// flash.
+//
+initialize by copy { readwrite };
+
+//
+// Indicate that the noinit values should be left alone. This includes the
+// stack, which if initialized will destroy the return address from the
+// initialization code, causing the processor to branch to zero and fault.
+//
+do not initialize { section .noinit };
+
+//
+// Place the interrupt vectors at the start of flash.
+//
+place at start of FLASH { readonly section .intvec };
+
+//
+// Place the remainder of the read-only items into flash.
+//
+place in FLASH { readonly };
+
+//
+// Place the RAM vector table at the start of SRAM.
+//
+place at start of SRAM { section VTABLE };
+
+//
+// Place all read/write items into SRAM.
+//
+place in SRAM { readwrite, block HEAP };
diff --git a/boards/ek-tm4c123gxl/usb_dev_bulk/usb_dev_bulk.ld b/boards/ek-tm4c123gxl/usb_dev_bulk/usb_dev_bulk.ld new file mode 100644 index 0000000..28e8466 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_bulk/usb_dev_bulk.ld @@ -0,0 +1,57 @@ +/******************************************************************************
+ *
+ * usb_dev_bulk.ld - Linker configuration file for usb_dev_bulk.
+ *
+ * Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+ * Software License Agreement
+ *
+ * Texas Instruments (TI) is supplying this software for use solely and
+ * exclusively on TI's microcontroller products. The software is owned by
+ * TI and/or its suppliers, and is protected under applicable copyright
+ * laws. You may not combine this software with "viral" open-source
+ * software in order to form a larger program.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+ * NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+ * NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+ * CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+ * DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ * This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+ *
+ *****************************************************************************/
+
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x00040000
+ SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000
+}
+
+SECTIONS
+{
+ .text :
+ {
+ _text = .;
+ KEEP(*(.isr_vector))
+ *(.text*)
+ *(.rodata*)
+ _etext = .;
+ } > FLASH
+
+ .data : AT(ADDR(.text) + SIZEOF(.text))
+ {
+ _data = .;
+ *(vtable)
+ *(.data*)
+ _edata = .;
+ } > SRAM
+
+ .bss :
+ {
+ _bss = .;
+ *(.bss*)
+ *(COMMON)
+ _ebss = .;
+ } > SRAM
+}
diff --git a/boards/ek-tm4c123gxl/usb_dev_bulk/usb_dev_bulk.sct b/boards/ek-tm4c123gxl/usb_dev_bulk/usb_dev_bulk.sct new file mode 100644 index 0000000..1bc1896 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_bulk/usb_dev_bulk.sct @@ -0,0 +1,47 @@ +;******************************************************************************
+;
+; usb_dev_bulk.sct - Linker configuration file for usb_dev_bulk.
+;
+; Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+; Software License Agreement
+;
+; Texas Instruments (TI) is supplying this software for use solely and
+; exclusively on TI's microcontroller products. The software is owned by
+; TI and/or its suppliers, and is protected under applicable copyright
+; laws. You may not combine this software with "viral" open-source
+; software in order to form a larger program.
+;
+; THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+; NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+; NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+; A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+; CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+; DAMAGES, FOR ANY REASON WHATSOEVER.
+;
+; This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+;
+;******************************************************************************
+
+LR_IROM 0x00000000 0x00040000
+{
+ ;
+ ; Specify the Execution Address of the code and the size.
+ ;
+ ER_IROM 0x00000000 0x00040000
+ {
+ *.o (RESET, +First)
+ * (InRoot$$Sections, +RO)
+ }
+
+ ;
+ ; Specify the Execution Address of the data area.
+ ;
+ RW_IRAM 0x20000000 0x00008000
+ {
+ ;
+ ; Uncomment the following line in order to use IntRegister().
+ ;
+ ;* (vtable, +First)
+ * (+RW, +ZI)
+ }
+}
diff --git a/boards/ek-tm4c123gxl/usb_dev_bulk/usb_dev_bulk.uvopt b/boards/ek-tm4c123gxl/usb_dev_bulk/usb_dev_bulk.uvopt new file mode 100644 index 0000000..abc827b --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_bulk/usb_dev_bulk.uvopt @@ -0,0 +1,345 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+ <SchemaVersion>1.0</SchemaVersion>
+
+ <Header>### uVision Project, (C) Keil Software</Header>
+
+ <Extensions>
+ <cExt>*.c</cExt>
+ <aExt>*.s*; *.src; *.a*</aExt>
+ <oExt>*.obj</oExt>
+ <lExt>*.lib</lExt>
+ <tExt>*.txt; *.h; *.inc</tExt>
+ <pExt>*.plm</pExt>
+ <CppX>*.cpp</CppX>
+ </Extensions>
+
+ <DaveTm>
+ <dwLowDateTime>0</dwLowDateTime>
+ <dwHighDateTime>0</dwHighDateTime>
+ </DaveTm>
+
+ <Target>
+ <TargetName>usb_dev_bulk</TargetName>
+ <ToolsetNumber>0x4</ToolsetNumber>
+ <ToolsetName>ARM-ADS</ToolsetName>
+ <TargetOption>
+ <CLKADS>8000000</CLKADS>
+ <OPTTT>
+ <gFlags>1</gFlags>
+ <BeepAtEnd>1</BeepAtEnd>
+ <RunSim>1</RunSim>
+ <RunTarget>0</RunTarget>
+ </OPTTT>
+ <OPTHX>
+ <HexSelection>1</HexSelection>
+ <FlashByte>65535</FlashByte>
+ <HexRangeLowAddress>0</HexRangeLowAddress>
+ <HexRangeHighAddress>0</HexRangeHighAddress>
+ <HexOffset>0</HexOffset>
+ </OPTHX>
+ <OPTLEX>
+ <PageWidth>79</PageWidth>
+ <PageLength>66</PageLength>
+ <TabStop>8</TabStop>
+ <ListingPath>.\rvmdk\</ListingPath>
+ </OPTLEX>
+ <ListingPage>
+ <CreateCListing>1</CreateCListing>
+ <CreateAListing>1</CreateAListing>
+ <CreateLListing>1</CreateLListing>
+ <CreateIListing>0</CreateIListing>
+ <AsmCond>1</AsmCond>
+ <AsmSymb>1</AsmSymb>
+ <AsmXref>0</AsmXref>
+ <CCond>1</CCond>
+ <CCode>0</CCode>
+ <CListInc>0</CListInc>
+ <CSymb>0</CSymb>
+ <LinkerCodeListing>0</LinkerCodeListing>
+ </ListingPage>
+ <OPTXL>
+ <LMap>1</LMap>
+ <LComments>1</LComments>
+ <LGenerateSymbols>1</LGenerateSymbols>
+ <LLibSym>1</LLibSym>
+ <LLines>1</LLines>
+ <LLocSym>1</LLocSym>
+ <LPubSym>1</LPubSym>
+ <LXref>0</LXref>
+ <LExpSel>0</LExpSel>
+ </OPTXL>
+ <OPTFL>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <IsCurrentTarget>1</IsCurrentTarget>
+ </OPTFL>
+ <CpuCode>255</CpuCode>
+ <Books>
+ <Book>
+ <Number>0</Number>
+ <Title>Data Sheet</Title>
+ <Path>DATASHTS\Luminary\TM4C123GH6PM.PDF</Path>
+ </Book>
+ </Books>
+ <DllOpt>
+ <SimDllName>SARMCM3.DLL</SimDllName>
+ <SimDllArguments>-MPU</SimDllArguments>
+ <SimDlgDllName>DCM.DLL</SimDlgDllName>
+ <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+ <TargetDllName>SARMCM3.DLL</TargetDllName>
+ <TargetDllArguments>-MPU</TargetDllArguments>
+ <TargetDlgDllName>TCM.DLL</TargetDlgDllName>
+ <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+ </DllOpt>
+ <DebugOpt>
+ <uSim>0</uSim>
+ <uTrg>1</uTrg>
+ <sLdApp>1</sLdApp>
+ <sGomain>1</sGomain>
+ <sRbreak>1</sRbreak>
+ <sRwatch>1</sRwatch>
+ <sRmem>1</sRmem>
+ <sRfunc>1</sRfunc>
+ <sRbox>1</sRbox>
+ <tLdApp>1</tLdApp>
+ <tGomain>0</tGomain>
+ <tRbreak>1</tRbreak>
+ <tRwatch>1</tRwatch>
+ <tRmem>1</tRmem>
+ <tRfunc>0</tRfunc>
+ <tRbox>1</tRbox>
+ <sRunDeb>0</sRunDeb>
+ <sLrtime>0</sLrtime>
+ <nTsel>4</nTsel>
+ <sDll></sDll>
+ <sDllPa></sDllPa>
+ <sDlgDll></sDlgDll>
+ <sDlgPa></sDlgPa>
+ <sIfile></sIfile>
+ <tDll></tDll>
+ <tDllPa></tDllPa>
+ <tDlgDll></tDlgDll>
+ <tDlgPa></tDlgPa>
+ <tIfile></tIfile>
+ <pMon>BIN\lmidk-agdi.dll</pMon>
+ </DebugOpt>
+ <TargetDriverDllRegistry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>lmidk-agdi</Key>
+ <Name>-O4614 -S3 -FO29</Name>
+ </SetRegEntry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>DLGTARM</Key>
+ <Name></Name>
+ </SetRegEntry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>ARMDBGFLAGS</Key>
+ <Name></Name>
+ </SetRegEntry>
+ </TargetDriverDllRegistry>
+ <DebugFlag>
+ <trace>0</trace>
+ <periodic>1</periodic>
+ <aLwin>0</aLwin>
+ <aCover>0</aCover>
+ <aSer1>0</aSer1>
+ <aSer2>0</aSer2>
+ <aPa>0</aPa>
+ <viewmode>1</viewmode>
+ <vrSel>0</vrSel>
+ <aSym>0</aSym>
+ <aTbox>0</aTbox>
+ <AscS1>0</AscS1>
+ <AscS2>0</AscS2>
+ <AscS3>0</AscS3>
+ <aSer3>0</aSer3>
+ <eProf>0</eProf>
+ <aLa>0</aLa>
+ <aPa1>0</aPa1>
+ <AscS4>0</AscS4>
+ <aSer4>0</aSer4>
+ <StkLoc>0</StkLoc>
+ <TrcWin>0</TrcWin>
+ <newCpu>0</newCpu>
+ <uProt>0</uProt>
+ </DebugFlag>
+ <LintExecutable></LintExecutable>
+ <LintConfigFile></LintConfigFile>
+ </TargetOption>
+ </Target>
+
+ <Group>
+ <GroupName>Source</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>1</FileNumber>
+ <FileType>2</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\startup_rvmdk.S</PathWithFileName>
+ <FilenameWithoutPath>startup_rvmdk.S</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>2</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\utils\uartstdio.c</PathWithFileName>
+ <FilenameWithoutPath>uartstdio.c</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>3</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\usb_bulk_structs.c</PathWithFileName>
+ <FilenameWithoutPath>usb_bulk_structs.c</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>4</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\usb_dev_bulk.c</PathWithFileName>
+ <FilenameWithoutPath>usb_dev_bulk.c</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>5</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\utils\ustdlib.c</PathWithFileName>
+ <FilenameWithoutPath>ustdlib.c</FilenameWithoutPath>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>Libraries</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>6</FileNumber>
+ <FileType>4</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\driverlib\rvmdk\driverlib.lib</PathWithFileName>
+ <FilenameWithoutPath>driverlib.lib</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>7</FileNumber>
+ <FileType>4</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\usblib\rvmdk\usblib.lib</PathWithFileName>
+ <FilenameWithoutPath>usblib.lib</FilenameWithoutPath>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>Documentation</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>3</GroupNumber>
+ <FileNumber>8</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <Focus>1</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>1</TopLine>
+ <CurrentLine>1</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\readme.txt</PathWithFileName>
+ <FilenameWithoutPath>readme.txt</FilenameWithoutPath>
+ <WindowPosition>
+ <length>44</length>
+ <flags>0</flags>
+ <showCmd>1</showCmd>
+ <MinPosition>
+ <xPos>-1</xPos>
+ <yPos>-1</yPos>
+ </MinPosition>
+ <MaxPosition>
+ <xPos>-1</xPos>
+ <yPos>-1</yPos>
+ </MaxPosition>
+ <NormalPosition>
+ <Top>0</Top>
+ <Left>0</Left>
+ <Right>729</Right>
+ <Bottom>300</Bottom>
+ </NormalPosition>
+ </WindowPosition>
+ </File>
+ </Group>
+
+ <MDIGroups>
+ <Orientation>1</Orientation>
+ <ActiveMDIGroup>0</ActiveMDIGroup>
+ <MDIGroup>
+ <Size>100</Size>
+ <ActiveTab>0</ActiveTab>
+ <Documents>
+ <Doc>
+ <Name>.\readme.txt</Name>
+ <ColumnNumber>0</ColumnNumber>
+ <TopLine>1</TopLine>
+ <CurrentLine>1</CurrentLine>
+ </Doc>
+ </Documents>
+ </MDIGroup>
+ </MDIGroups>
+
+</ProjectOpt>
diff --git a/boards/ek-tm4c123gxl/usb_dev_bulk/usb_dev_bulk.uvproj b/boards/ek-tm4c123gxl/usb_dev_bulk/usb_dev_bulk.uvproj new file mode 100644 index 0000000..721e894 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_bulk/usb_dev_bulk.uvproj @@ -0,0 +1,444 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+ <SchemaVersion>1.1</SchemaVersion>
+
+ <Header>### uVision Project, (C) Keil Software</Header>
+
+ <Targets>
+ <Target>
+ <TargetName>usb_dev_bulk</TargetName>
+ <ToolsetNumber>0x4</ToolsetNumber>
+ <ToolsetName>ARM-ADS</ToolsetName>
+ <TargetOption>
+ <TargetCommonOption>
+ <Device>TM4C123GH6PM</Device>
+ <Vendor>Texas Instruments</Vendor>
+ <Cpu>IRAM(0x20000000-0x20007FFF) IROM(0-0x3FFFF) CLOCK(8000000) CPUTYPE("Cortex-M4") FPU2</Cpu>
+ <FlashUtilSpec></FlashUtilSpec>
+ <StartupFile>"STARTUP\Luminary\Startup.s" ("Luminary Startup Code")</StartupFile>
+ <FlashDriverDll>UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0LM4F_256 -FS00 -FL040000)</FlashDriverDll>
+ <DeviceId>5919</DeviceId>
+ <RegisterFile>LM4Fxxxx.H</RegisterFile>
+ <MemoryEnv></MemoryEnv>
+ <Cmp></Cmp>
+ <Asm></Asm>
+ <Linker></Linker>
+ <OHString></OHString>
+ <InfinionOptionDll></InfinionOptionDll>
+ <SLE66CMisc></SLE66CMisc>
+ <SLE66AMisc></SLE66AMisc>
+ <SLE66LinkerMisc></SLE66LinkerMisc>
+ <UseEnv>0</UseEnv>
+ <BinPath></BinPath>
+ <IncludePath></IncludePath>
+ <LibPath></LibPath>
+ <RegisterFilePath>Luminary\</RegisterFilePath>
+ <DBRegisterFilePath>Luminary\</DBRegisterFilePath>
+ <TargetStatus>
+ <Error>0</Error>
+ <ExitCodeStop>0</ExitCodeStop>
+ <ButtonStop>0</ButtonStop>
+ <NotGenerated>0</NotGenerated>
+ <InvalidFlash>1</InvalidFlash>
+ </TargetStatus>
+ <OutputDirectory>.\rvmdk\</OutputDirectory>
+ <OutputName>usb_dev_bulk</OutputName>
+ <CreateExecutable>1</CreateExecutable>
+ <CreateLib>0</CreateLib>
+ <CreateHexFile>0</CreateHexFile>
+ <DebugInformation>1</DebugInformation>
+ <BrowseInformation>1</BrowseInformation>
+ <ListingPath>.\rvmdk\</ListingPath>
+ <HexFormatSelection>1</HexFormatSelection>
+ <Merge32K>0</Merge32K>
+ <CreateBatchFile>0</CreateBatchFile>
+ <BeforeCompile>
+ <RunUserProg1>0</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name></UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </BeforeCompile>
+ <BeforeMake>
+ <RunUserProg1>0</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name></UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </BeforeMake>
+ <AfterMake>
+ <RunUserProg1>1</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name>fromelf --bin --output .\rvmdk\usb_dev_bulk.bin .\rvmdk\usb_dev_bulk.axf</UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </AfterMake>
+ <SelectedForBatchBuild>0</SelectedForBatchBuild>
+ <SVCSIdString></SVCSIdString>
+ </TargetCommonOption>
+ <CommonProperty>
+ <UseCPPCompiler>0</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <DllOption>
+ <SimDllName>SARMCM3.DLL</SimDllName>
+ <SimDllArguments>-MPU</SimDllArguments>
+ <SimDlgDll>DCM.DLL</SimDlgDll>
+ <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+ <TargetDllName>SARMCM3.DLL</TargetDllName>
+ <TargetDllArguments>-MPU</TargetDllArguments>
+ <TargetDlgDll>TCM.DLL</TargetDlgDll>
+ <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+ </DllOption>
+ <DebugOption>
+ <OPTHX>
+ <HexSelection>1</HexSelection>
+ <HexRangeLowAddress>0</HexRangeLowAddress>
+ <HexRangeHighAddress>0</HexRangeHighAddress>
+ <HexOffset>0</HexOffset>
+ <Oh166RecLen>16</Oh166RecLen>
+ </OPTHX>
+ <Simulator>
+ <UseSimulator>0</UseSimulator>
+ <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+ <RunToMain>1</RunToMain>
+ <RestoreBreakpoints>1</RestoreBreakpoints>
+ <RestoreWatchpoints>1</RestoreWatchpoints>
+ <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+ <RestoreFunctions>1</RestoreFunctions>
+ <RestoreToolbox>1</RestoreToolbox>
+ <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+ </Simulator>
+ <Target>
+ <UseTarget>1</UseTarget>
+ <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+ <RunToMain>0</RunToMain>
+ <RestoreBreakpoints>1</RestoreBreakpoints>
+ <RestoreWatchpoints>1</RestoreWatchpoints>
+ <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+ <RestoreFunctions>0</RestoreFunctions>
+ <RestoreToolbox>1</RestoreToolbox>
+ </Target>
+ <RunDebugAfterBuild>0</RunDebugAfterBuild>
+ <TargetSelection>4</TargetSelection>
+ <SimDlls>
+ <CpuDll></CpuDll>
+ <CpuDllArguments></CpuDllArguments>
+ <PeripheralDll></PeripheralDll>
+ <PeripheralDllArguments></PeripheralDllArguments>
+ <InitializationFile></InitializationFile>
+ </SimDlls>
+ <TargetDlls>
+ <CpuDll></CpuDll>
+ <CpuDllArguments></CpuDllArguments>
+ <PeripheralDll></PeripheralDll>
+ <PeripheralDllArguments></PeripheralDllArguments>
+ <InitializationFile></InitializationFile>
+ <Driver>BIN\lmidk-agdi.dll</Driver>
+ </TargetDlls>
+ </DebugOption>
+ <Utilities>
+ <Flash1>
+ <UseTargetDll>1</UseTargetDll>
+ <UseExternalTool>0</UseExternalTool>
+ <RunIndependent>0</RunIndependent>
+ <UpdateFlashBeforeDebugging>0</UpdateFlashBeforeDebugging>
+ <Capability>1</Capability>
+ <DriverSelection>4099</DriverSelection>
+ </Flash1>
+ <Flash2>BIN\lmidk-agdi.dll</Flash2>
+ <Flash3></Flash3>
+ <Flash4></Flash4>
+ </Utilities>
+ <TargetArmAds>
+ <ArmAdsMisc>
+ <GenerateListings>0</GenerateListings>
+ <asHll>1</asHll>
+ <asAsm>1</asAsm>
+ <asMacX>1</asMacX>
+ <asSyms>1</asSyms>
+ <asFals>1</asFals>
+ <asDbgD>1</asDbgD>
+ <asForm>1</asForm>
+ <ldLst>0</ldLst>
+ <ldmm>1</ldmm>
+ <ldXref>1</ldXref>
+ <BigEnd>0</BigEnd>
+ <AdsALst>0</AdsALst>
+ <AdsACrf>0</AdsACrf>
+ <AdsANop>0</AdsANop>
+ <AdsANot>0</AdsANot>
+ <AdsLLst>1</AdsLLst>
+ <AdsLmap>1</AdsLmap>
+ <AdsLcgr>1</AdsLcgr>
+ <AdsLsym>1</AdsLsym>
+ <AdsLszi>1</AdsLszi>
+ <AdsLtoi>1</AdsLtoi>
+ <AdsLsun>1</AdsLsun>
+ <AdsLven>1</AdsLven>
+ <AdsLsxf>1</AdsLsxf>
+ <RvctClst>0</RvctClst>
+ <GenPPlst>0</GenPPlst>
+ <AdsCpuType>"Cortex-M4"</AdsCpuType>
+ <RvctDeviceName></RvctDeviceName>
+ <mOS>0</mOS>
+ <uocRom>0</uocRom>
+ <uocRam>0</uocRam>
+ <hadIROM>1</hadIROM>
+ <hadIRAM>1</hadIRAM>
+ <hadXRAM>0</hadXRAM>
+ <uocXRam>0</uocXRam>
+ <RvdsVP>2</RvdsVP>
+ <hadIRAM2>0</hadIRAM2>
+ <hadIROM2>0</hadIROM2>
+ <StupSel>8</StupSel>
+ <useUlib>1</useUlib>
+ <EndSel>0</EndSel>
+ <uLtcg>0</uLtcg>
+ <RoSelD>3</RoSelD>
+ <RwSelD>3</RwSelD>
+ <CodeSel>0</CodeSel>
+ <OptFeed>0</OptFeed>
+ <NoZi1>0</NoZi1>
+ <NoZi2>0</NoZi2>
+ <NoZi3>0</NoZi3>
+ <NoZi4>0</NoZi4>
+ <NoZi5>0</NoZi5>
+ <Ro1Chk>0</Ro1Chk>
+ <Ro2Chk>0</Ro2Chk>
+ <Ro3Chk>0</Ro3Chk>
+ <Ir1Chk>1</Ir1Chk>
+ <Ir2Chk>0</Ir2Chk>
+ <Ra1Chk>0</Ra1Chk>
+ <Ra2Chk>0</Ra2Chk>
+ <Ra3Chk>0</Ra3Chk>
+ <Im1Chk>1</Im1Chk>
+ <Im2Chk>0</Im2Chk>
+ <OnChipMemories>
+ <Ocm1>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm1>
+ <Ocm2>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm2>
+ <Ocm3>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm3>
+ <Ocm4>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm4>
+ <Ocm5>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm5>
+ <Ocm6>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm6>
+ <IRAM>
+ <Type>0</Type>
+ <StartAddress>0x20000000</StartAddress>
+ <Size>0x8000</Size>
+ </IRAM>
+ <IROM>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x40000</Size>
+ </IROM>
+ <XRAM>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </XRAM>
+ <OCR_RVCT1>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT1>
+ <OCR_RVCT2>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT2>
+ <OCR_RVCT3>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT3>
+ <OCR_RVCT4>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x40000</Size>
+ </OCR_RVCT4>
+ <OCR_RVCT5>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT5>
+ <OCR_RVCT6>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT6>
+ <OCR_RVCT7>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT7>
+ <OCR_RVCT8>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT8>
+ <OCR_RVCT9>
+ <Type>0</Type>
+ <StartAddress>0x20000000</StartAddress>
+ <Size>0x8000</Size>
+ </OCR_RVCT9>
+ <OCR_RVCT10>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT10>
+ </OnChipMemories>
+ <RvctStartVector></RvctStartVector>
+ </ArmAdsMisc>
+ <Cads>
+ <interw>0</interw>
+ <Optim>3</Optim>
+ <oTime>0</oTime>
+ <SplitLS>0</SplitLS>
+ <OneElfS>1</OneElfS>
+ <Strict>0</Strict>
+ <EnumInt>0</EnumInt>
+ <PlainCh>0</PlainCh>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <wLevel>2</wLevel>
+ <uThumb>0</uThumb>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define>rvmdk PART_TM4C123GH6PM TARGET_IS_TM4C123_RB1 UART_BUFFERED</Define>
+ <Undefine></Undefine>
+ <IncludePath>..\..\..\..;</IncludePath>
+ </VariousControls>
+ </Cads>
+ <Aads>
+ <interw>1</interw>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <thumb>0</thumb>
+ <SplitLS>0</SplitLS>
+ <SwStkChk>0</SwStkChk>
+ <NoWarn>0</NoWarn>
+ <VariousControls>
+ <MiscControls></MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Aads>
+ <LDads>
+ <umfTarg>0</umfTarg>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <noStLib>0</noStLib>
+ <RepFail>1</RepFail>
+ <useFile>0</useFile>
+ <TextAddressRange>0x00000000</TextAddressRange>
+ <DataAddressRange>0x20000000</DataAddressRange>
+ <ScatterFile>usb_dev_bulk.sct</ScatterFile>
+ <IncludeLibs></IncludeLibs>
+ <IncludeLibsPath></IncludeLibsPath>
+ <Misc>--entry Reset_Handler</Misc>
+ <LinkerInputFile></LinkerInputFile>
+ <DisabledWarnings></DisabledWarnings>
+ </LDads>
+ </TargetArmAds>
+ </TargetOption>
+ <Groups>
+ <Group>
+ <GroupName>Source</GroupName>
+ <Files>
+ <File>
+ <FileName>startup_rvmdk.S</FileName>
+ <FileType>2</FileType>
+ <FilePath>.\startup_rvmdk.S</FilePath>
+ </File>
+ <File>
+ <FileName>uartstdio.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>..\..\..\..\utils\uartstdio.c</FilePath>
+ </File>
+ <File>
+ <FileName>usb_bulk_structs.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>.\usb_bulk_structs.c</FilePath>
+ </File>
+ <File>
+ <FileName>usb_dev_bulk.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>.\usb_dev_bulk.c</FilePath>
+ </File>
+ <File>
+ <FileName>ustdlib.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>..\..\..\..\utils\ustdlib.c</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>Libraries</GroupName>
+ <Files>
+ <File>
+ <FileName>driverlib.lib</FileName>
+ <FileType>4</FileType>
+ <FilePath>..\..\..\..\driverlib\rvmdk\driverlib.lib</FilePath>
+ </File>
+ <File>
+ <FileName>usblib.lib</FileName>
+ <FileType>4</FileType>
+ <FilePath>..\..\..\..\usblib\rvmdk\usblib.lib</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>Documentation</GroupName>
+ <Files>
+ <File>
+ <FileName>readme.txt</FileName>
+ <FileType>5</FileType>
+ <FilePath>.\readme.txt</FilePath>
+ </File>
+ </Files>
+ </Group>
+ </Groups>
+ </Target>
+ </Targets>
+
+</Project>
diff --git a/boards/ek-tm4c123gxl/usb_dev_bulk/usb_dev_bulk_ccs.cmd b/boards/ek-tm4c123gxl/usb_dev_bulk/usb_dev_bulk_ccs.cmd new file mode 100644 index 0000000..f0ba0c7 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_bulk/usb_dev_bulk_ccs.cmd @@ -0,0 +1,70 @@ +/******************************************************************************
+ *
+ * usb_dev_bulk_ccs.cmd - CCS linker configuration file for usb_dev_bulk.
+ *
+ * Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+ * Software License Agreement
+ *
+ * Texas Instruments (TI) is supplying this software for use solely and
+ * exclusively on TI's microcontroller products. The software is owned by
+ * TI and/or its suppliers, and is protected under applicable copyright
+ * laws. You may not combine this software with "viral" open-source
+ * software in order to form a larger program.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+ * NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+ * NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+ * CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+ * DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ * This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+ *
+ *****************************************************************************/
+
+--retain=g_pfnVectors
+
+/* The following command line options are set as part of the CCS project. */
+/* If you are building using the command line, or for some reason want to */
+/* define them here, you can uncomment and modify these lines as needed. */
+/* If you are using CCS for building, it is probably better to make any such */
+/* modifications in your CCS project and leave this file alone. */
+/* */
+/* --heap_size=0 */
+/* --stack_size=256 */
+/* --library=rtsv7M3_T_le_eabi.lib */
+
+/* The starting address of the application. Normally the interrupt vectors */
+/* must be located at the beginning of the application. */
+#define APP_BASE 0x00000000
+#define RAM_BASE 0x20000000
+
+/* System memory map */
+
+MEMORY
+{
+ /* Application stored in and executes from internal flash */
+ FLASH (RX) : origin = APP_BASE, length = 0x00040000
+ /* Application uses internal RAM for data */
+ SRAM (RWX) : origin = 0x20000000, length = 0x00008000
+}
+
+/* Section allocation in memory */
+
+SECTIONS
+{
+ .intvecs: > APP_BASE
+ .text : > FLASH
+ .const : > FLASH
+ .cinit : > FLASH
+ .pinit : > FLASH
+ .init_array : > FLASH
+
+ .vtable : > RAM_BASE
+ .data : > SRAM
+ .bss : > SRAM
+ .sysmem : > SRAM
+ .stack : > SRAM
+}
+
+__STACK_TOP = __stack + 1024;
diff --git a/boards/ek-tm4c123gxl/usb_dev_gamepad/Makefile b/boards/ek-tm4c123gxl/usb_dev_gamepad/Makefile new file mode 100644 index 0000000..000763b --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_gamepad/Makefile @@ -0,0 +1,90 @@ +#******************************************************************************
+#
+# Makefile - Rules for building the USB device gamepad example.
+#
+# Copyright (c) 2013-2014 Texas Instruments Incorporated. All rights reserved.
+# Software License Agreement
+#
+# Texas Instruments (TI) is supplying this software for use solely and
+# exclusively on TI's microcontroller products. The software is owned by
+# TI and/or its suppliers, and is protected under applicable copyright
+# laws. You may not combine this software with "viral" open-source
+# software in order to form a larger program.
+#
+# THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+# NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+# NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+# CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+# DAMAGES, FOR ANY REASON WHATSOEVER.
+#
+# This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+#
+#******************************************************************************
+
+#
+# Defines the part type that this project uses.
+#
+PART=TM4C123GH6PM
+
+#
+# The base directory for TivaWare.
+#
+ROOT=../../../..
+
+#
+# Include the common make definitions.
+#
+include ${ROOT}/makedefs
+
+#
+# Where to find source files that do not live in this directory.
+#
+VPATH=../drivers
+VPATH+=../../../../utils
+
+#
+# Where to find header files that do not live in the source directory.
+#
+IPATH=..
+IPATH+=../../../..
+
+#
+# The default rule, which causes the USB device gamepad example to be built.
+#
+all: ${COMPILER}
+all: ${COMPILER}/usb_dev_gamepad.axf
+
+#
+# The rule to clean out all the build products.
+#
+clean:
+ @rm -rf ${COMPILER} ${wildcard *~}
+
+#
+# The rule to create the target directory.
+#
+${COMPILER}:
+ @mkdir -p ${COMPILER}
+
+#
+# Rules for building the USB device gamepad example.
+#
+${COMPILER}/usb_dev_gamepad.axf: ${COMPILER}/buttons.o
+${COMPILER}/usb_dev_gamepad.axf: ${COMPILER}/startup_${COMPILER}.o
+${COMPILER}/usb_dev_gamepad.axf: ${COMPILER}/uartstdio.o
+${COMPILER}/usb_dev_gamepad.axf: ${COMPILER}/usb_dev_gamepad.o
+${COMPILER}/usb_dev_gamepad.axf: ${COMPILER}/usb_gamepad_structs.o
+${COMPILER}/usb_dev_gamepad.axf: ${ROOT}/usblib/${COMPILER}/libusb.a
+${COMPILER}/usb_dev_gamepad.axf: ${ROOT}/driverlib/${COMPILER}/libdriver.a
+${COMPILER}/usb_dev_gamepad.axf: usb_dev_gamepad.ld
+SCATTERgcc_usb_dev_gamepad=usb_dev_gamepad.ld
+ENTRY_usb_dev_gamepad=ResetISR
+CFLAGSgcc=-DTARGET_IS_TM4C123_RA1 -DUART_BUFFERED
+
+#
+# Include the automatically generated dependency files.
+#
+ifneq (${MAKECMDGOALS},clean)
+-include ${wildcard ${COMPILER}/*.d} __dummy__
+endif
diff --git a/boards/ek-tm4c123gxl/usb_dev_gamepad/ccs/.ccsimportspec b/boards/ek-tm4c123gxl/usb_dev_gamepad/ccs/.ccsimportspec new file mode 100644 index 0000000..0228898 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_gamepad/ccs/.ccsimportspec @@ -0,0 +1,10 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<importSpec>
+ <source root="..">
+ <file name="usb_dev_gamepad.c"/>
+ <file name="usb_gamepad_structs.c"/>
+ <file name="usb_gamepad_structs.h"/>
+ <file regex=".*_ccs\.cmd"/>
+ <file name="startup_ccs.c"/>
+ </source>
+</importSpec>
diff --git a/boards/ek-tm4c123gxl/usb_dev_gamepad/ccs/.ccsproject b/boards/ek-tm4c123gxl/usb_dev_gamepad/ccs/.ccsproject new file mode 100644 index 0000000..75fb50e --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_gamepad/ccs/.ccsproject @@ -0,0 +1,10 @@ +<?xml version="1.0" encoding="UTF-8" ?>
+<?ccsproject version="1.0"?>
+<projectOptions>
+ <deviceVariant value="Cortex M.TM4C123GH6PM"/>
+ <deviceFamily value="TMS470"/>
+ <deviceEndianness value="little"/>
+ <codegenToolVersion value="5.0.4"/>
+ <isElfFormat value="true"/>
+ <rts value="libc.a"/>
+</projectOptions>
diff --git a/boards/ek-tm4c123gxl/usb_dev_gamepad/ccs/.cproject b/boards/ek-tm4c123gxl/usb_dev_gamepad/ccs/.cproject new file mode 100644 index 0000000..d93aed1 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_gamepad/ccs/.cproject @@ -0,0 +1,193 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+ <storageModule configRelations="2" moduleId="org.eclipse.cdt.core.settings">
+ <cconfiguration id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1327121568">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1327121568" moduleId="org.eclipse.cdt.core.settings" name="Debug">
+ <macros>
+ <stringMacro name="SW_ROOT" type="VALUE_PATH_DIR" value="${PROJECT_ROOT}/../../../../.."/>
+ </macros>
+ <externalSettings/>
+ <extensions>
+ <extension id="com.ti.ccstudio.binaryparser.CoffParser" point="org.eclipse.cdt.core.BinaryParser"/>
+ <extension id="com.ti.ccstudio.errorparser.CoffErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.LinkErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.AsmErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactExtension="out" artifactName="${ProjName}" buildProperties="" cleanCommand="${CG_CLEAN_CMD}" description="" id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1327121568" name="Debug" parent="com.ti.ccstudio.buildDefinitions.TMS470.Debug" postbuildStep=""${CCE_INSTALL_ROOT}/utils/tiobj2bin/tiobj2bin" "${BuildArtifactFileName}" "${BuildArtifactFileBaseName}.bin" "${CG_TOOL_ROOT}/bin/armofd" "${CG_TOOL_ROOT}/bin/armhex" "${CCE_INSTALL_ROOT}/utils/tiobj2bin/mkhex4bin"">
+ <folderInfo id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1327121568." name="/" resourcePath="">
+ <toolChain id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.DebugToolchain.1736337877" name="TI Build Tools" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.DebugToolchain" targetTool="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug.1370964186">
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS.92645403" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS" valueType="stringList">
+ <listOptionValue builtIn="false" value="DEVICE_CONFIGURATION_ID=Cortex M.TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="DEVICE_ENDIANNESS=little"/>
+ <listOptionValue builtIn="false" value="OUTPUT_FORMAT=ELF"/>
+ <listOptionValue builtIn="false" value="CCS_MBS_VERSION=5.1.0.01"/>
+ <listOptionValue builtIn="false" value="RUNTIME_SUPPORT_LIBRARY=libc.a"/>
+ <listOptionValue builtIn="false" value="OUTPUT_TYPE=executable"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION.1595041638" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION" value="5.0.4" valueType="string"/>
+ <targetPlatform id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformDebug.324982727" name="Platform" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformDebug"/>
+ <builder buildPath="${BuildDirectory}" id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderDebug.1015209288" name="GNU Make.Debug" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderDebug"/>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerDebug.337432691" name="ARM Compiler" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerDebug">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.908617069" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.7M4" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.1939470847" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.2068409343" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.eabi" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.308922837" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.FPv4SPD16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL.1820887814" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL.SYMDEBUG__DWARF" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING.1611685227" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING" valueType="stringList">
+ <listOptionValue builtIn="false" value="225"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER.631808797" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.1855199972" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH.1821761680" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH" valueType="includePath">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/examples/boards/ek-tm4c123gxl""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN.1272687846" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.1024000423" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.on" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL.1468183327" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL.2" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC.358891435" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL.448518820" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE.1217722066" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE" valueType="definedSymbols">
+ <listOptionValue builtIn="false" value="ccs="ccs""/>
+ <listOptionValue builtIn="false" value="PART_TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="TARGET_IS_TM4C123_RA1"/>
+ <listOptionValue builtIn="false" value="UART_BUFFERED"/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS.611157688" name="C Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS.145670103" name="C++ Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS.1515897486" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS.1769171014" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS"/>
+ </tool>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug.1370964186" name="ARM Linker" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE.1890925409" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE" value=""usb_dev_gamepad_ccs.map"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE.1013357127" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE" value="1024" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE.2073369646" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE" value="0" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE.707148981" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE" value=""${ProjName}.out"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO.534709397" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO" value=""${ProjName}_linkInfo.xml"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER.1640888081" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.454134377" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH.1473256597" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH" valueType="libPaths">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/lib""/>
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY.1773680953" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY" valueType="libs">
+ <listOptionValue builtIn="false" value=""libc.a""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/driverlib/ccs/Debug/driverlib.lib""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/usblib/ccs/Debug/usblib.lib""/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS.1675668207" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS.2063019203" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS.1976618779" name="Generated Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS"/>
+ </tool>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ <cconfiguration id="com.ti.ccstudio.buildDefinitions.TMS470.Release.137078024">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.ti.ccstudio.buildDefinitions.TMS470.Release.137078024" moduleId="org.eclipse.cdt.core.settings" name="Release">
+ <macros>
+ <stringMacro name="SW_ROOT" type="VALUE_PATH_DIR" value="${PROJECT_ROOT}/../../../../.."/>
+ </macros>
+ <externalSettings/>
+ <extensions>
+ <extension id="com.ti.ccstudio.binaryparser.CoffParser" point="org.eclipse.cdt.core.BinaryParser"/>
+ <extension id="com.ti.ccstudio.errorparser.CoffErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.LinkErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.AsmErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactExtension="out" artifactName="${ProjName}" buildProperties="" cleanCommand="${CG_CLEAN_CMD}" description="" id="com.ti.ccstudio.buildDefinitions.TMS470.Release.137078024" name="Release" parent="com.ti.ccstudio.buildDefinitions.TMS470.Release" postbuildStep=""${CCE_INSTALL_ROOT}/utils/tiobj2bin/tiobj2bin" "${BuildArtifactFileName}" "${BuildArtifactFileBaseName}.bin" "${CG_TOOL_ROOT}/bin/armofd" "${CG_TOOL_ROOT}/bin/armhex" "${CCE_INSTALL_ROOT}/utils/tiobj2bin/mkhex4bin"">
+ <folderInfo id="com.ti.ccstudio.buildDefinitions.TMS470.Release.137078024." name="/" resourcePath="">
+ <toolChain id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.ReleaseToolchain.994807841" name="TI Build Tools" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.ReleaseToolchain" targetTool="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease.2055763421">
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS.1254837139" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS" valueType="stringList">
+ <listOptionValue builtIn="false" value="DEVICE_CONFIGURATION_ID=Cortex M.TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="DEVICE_ENDIANNESS=little"/>
+ <listOptionValue builtIn="false" value="OUTPUT_FORMAT=ELF"/>
+ <listOptionValue builtIn="false" value="CCS_MBS_VERSION=5.1.0.01"/>
+ <listOptionValue builtIn="false" value="RUNTIME_SUPPORT_LIBRARY=libc.a"/>
+ <listOptionValue builtIn="false" value="OUTPUT_TYPE=executable"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION.1979543397" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION" value="5.0.4" valueType="string"/>
+ <targetPlatform id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformRelease.1982932055" name="Platform" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformRelease"/>
+ <builder buildPath="${BuildDirectory}" id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderRelease.632464166" name="GNU Make.Release" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderRelease"/>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerRelease.159258722" name="ARM Compiler" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerRelease">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.1160477865" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.7M4" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.1063376058" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.974171727" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.eabi" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.500576266" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.FPv4SPD16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING.2049105045" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING" valueType="stringList">
+ <listOptionValue builtIn="false" value="225"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER.879292924" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.28362514" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH.1608357580" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH" valueType="includePath">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/examples/boards/ek-tm4c123gxl""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN.396889089" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.390149658" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.on" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC.1181965169" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL.1361003176" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE.142612373" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE" valueType="definedSymbols">
+ <listOptionValue builtIn="false" value="ccs="ccs""/>
+ <listOptionValue builtIn="false" value="PART_TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="TARGET_IS_TM4C123_RA1"/>
+ <listOptionValue builtIn="false" value="UART_BUFFERED"/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS.2039566756" name="C Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS.2113093138" name="C++ Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS.321796190" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS.674411719" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS"/>
+ </tool>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease.2055763421" name="ARM Linker" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE.902424516" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE" value=""usb_dev_gamepad_ccs.map"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE.333558227" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE" value="1024" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE.481440459" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE" value="0" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE.114647846" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE" value=""${ProjName}.out"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO.823524193" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO" value=""${ProjName}_linkInfo.xml"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER.1248378897" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.848180592" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH.1282081790" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH" valueType="libPaths">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/lib""/>
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY.2083779038" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY" valueType="libs">
+ <listOptionValue builtIn="false" value=""libc.a""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/driverlib/ccs/Debug/driverlib.lib""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/usblib/ccs/Debug/usblib.lib""/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS.514757858" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS.92630023" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS.1238494603" name="Generated Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS"/>
+ </tool>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <project id="usb_dev_gamepad.com.ti.ccstudio.buildDefinitions.TMS470.ProjectType.1428269346" name="ARM" projectType="com.ti.ccstudio.buildDefinitions.TMS470.ProjectType"/>
+ </storageModule>
+ <storageModule moduleId="scannerConfiguration"/>
+ <storageModule moduleId="org.eclipse.cdt.core.language.mapping">
+ <project-mappings>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.asmSource" language="com.ti.ccstudio.core.TIASMLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cHeader" language="com.ti.ccstudio.core.TIGCCLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cSource" language="com.ti.ccstudio.core.TIGCCLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cxxHeader" language="com.ti.ccstudio.core.TIGPPLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cxxSource" language="com.ti.ccstudio.core.TIGPPLanguage"/>
+ </project-mappings>
+ </storageModule>
+</cproject>
diff --git a/boards/ek-tm4c123gxl/usb_dev_gamepad/ccs/.project b/boards/ek-tm4c123gxl/usb_dev_gamepad/ccs/.project new file mode 100644 index 0000000..483ee7c --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_gamepad/ccs/.project @@ -0,0 +1,65 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+ <name>usb_dev_gamepad</name>
+ <comment></comment>
+ <projects>
+ </projects>
+ <buildSpec>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+ <triggers>full,incremental,</triggers>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ </buildSpec>
+ <natures>
+ <nature>com.ti.ccstudio.core.ccsNature</nature>
+ <nature>org.eclipse.cdt.core.cnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+ <nature>org.eclipse.cdt.core.ccnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+ </natures>
+ <linkedResources>
+ <link>
+ <name>startup_ccs.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/usb_dev_gamepad/startup_ccs.c</locationURI>
+ </link>
+ <link>
+ <name>usb_dev_gamepad.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/usb_dev_gamepad/usb_dev_gamepad.c</locationURI>
+ </link>
+ <link>
+ <name>usb_dev_gamepad_ccs.cmd</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/usb_dev_gamepad/usb_dev_gamepad_ccs.cmd</locationURI>
+ </link>
+ <link>
+ <name>usb_gamepad_structs.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/usb_dev_gamepad/usb_gamepad_structs.c</locationURI>
+ </link>
+ <link>
+ <name>drivers/buttons.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/drivers/buttons.c</locationURI>
+ </link>
+ <link>
+ <name>utils/uartstdio.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/utils/uartstdio.c</locationURI>
+ </link>
+ </linkedResources>
+ <variableList>
+ <variable>
+ <name>SW_ROOT</name>
+ <value>$%7BPARENT-5-PROJECT_LOC%7D</value>
+ </variable>
+ </variableList>
+</projectDescription>
diff --git a/boards/ek-tm4c123gxl/usb_dev_gamepad/ccs/.settings/org.eclipse.cdt.codan.core.prefs b/boards/ek-tm4c123gxl/usb_dev_gamepad/ccs/.settings/org.eclipse.cdt.codan.core.prefs new file mode 100644 index 0000000..98b6350 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_gamepad/ccs/.settings/org.eclipse.cdt.codan.core.prefs @@ -0,0 +1,3 @@ +eclipse.preferences.version=1
+inEditor=false
+onBuild=false
diff --git a/boards/ek-tm4c123gxl/usb_dev_gamepad/ccs/Debug/usb_dev_gamepad.bin b/boards/ek-tm4c123gxl/usb_dev_gamepad/ccs/Debug/usb_dev_gamepad.bin Binary files differnew file mode 100644 index 0000000..33658d5 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_gamepad/ccs/Debug/usb_dev_gamepad.bin diff --git a/boards/ek-tm4c123gxl/usb_dev_gamepad/ccs/Debug/usb_dev_gamepad.out b/boards/ek-tm4c123gxl/usb_dev_gamepad/ccs/Debug/usb_dev_gamepad.out Binary files differnew file mode 100644 index 0000000..86a83fc --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_gamepad/ccs/Debug/usb_dev_gamepad.out diff --git a/boards/ek-tm4c123gxl/usb_dev_gamepad/ccs/macros.ini_initial b/boards/ek-tm4c123gxl/usb_dev_gamepad/ccs/macros.ini_initial new file mode 100644 index 0000000..31214b5 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_gamepad/ccs/macros.ini_initial @@ -0,0 +1 @@ +SW_ROOT = ../../../../..
diff --git a/boards/ek-tm4c123gxl/usb_dev_gamepad/ccs/target_config.ccxml b/boards/ek-tm4c123gxl/usb_dev_gamepad/ccs/target_config.ccxml new file mode 100644 index 0000000..be4342a --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_gamepad/ccs/target_config.ccxml @@ -0,0 +1,13 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<configurations XML_version="1.2" id="configurations_0">
+ <configuration XML_version="1.2" id="Stellaris In-Circuit Debug Interface_0">
+ <instance XML_version="1.2" desc="Stellaris In-Circuit Debug Interface_0" href="connections/Stellaris_ICDI_Connection.xml" id="Stellaris In-Circuit Debug Interface_0" xml="Stellaris_ICDI_Connection.xml" xmlpath="connections"/>
+ <connection XML_version="1.2" id="Stellaris In-Circuit Debug Interface_0">
+ <instance XML_version="1.2" href="drivers/stellaris_cs_dap.xml" id="drivers" xml="stellaris_cs_dap.xml" xmlpath="drivers"/>
+ <instance XML_version="1.2" href="drivers/stellaris_cortex_m4.xml" id="drivers" xml="stellaris_cortex_m4.xml" xmlpath="drivers"/>
+ <platform XML_version="1.2" id="platform_0">
+ <instance XML_version="1.2" desc="Stellaris TM4C123GH6PM_0" href="devices/tm4c123gh6pm.xml" id="Stellaris TM4C123GH6PM_0" xml="tm4c123gh6pm.xml" xmlpath="devices"/>
+ </platform>
+ </connection>
+ </configuration>
+</configurations>
diff --git a/boards/ek-tm4c123gxl/usb_dev_gamepad/ewarm/Exe/usb_dev_gamepad.bin b/boards/ek-tm4c123gxl/usb_dev_gamepad/ewarm/Exe/usb_dev_gamepad.bin Binary files differnew file mode 100644 index 0000000..893ad9c --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_gamepad/ewarm/Exe/usb_dev_gamepad.bin diff --git a/boards/ek-tm4c123gxl/usb_dev_gamepad/ewarm/Exe/usb_dev_gamepad.out b/boards/ek-tm4c123gxl/usb_dev_gamepad/ewarm/Exe/usb_dev_gamepad.out Binary files differnew file mode 100644 index 0000000..3e97194 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_gamepad/ewarm/Exe/usb_dev_gamepad.out diff --git a/boards/ek-tm4c123gxl/usb_dev_gamepad/gcc/usb_dev_gamepad.axf b/boards/ek-tm4c123gxl/usb_dev_gamepad/gcc/usb_dev_gamepad.axf Binary files differnew file mode 100644 index 0000000..0b02e94 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_gamepad/gcc/usb_dev_gamepad.axf diff --git a/boards/ek-tm4c123gxl/usb_dev_gamepad/gcc/usb_dev_gamepad.bin b/boards/ek-tm4c123gxl/usb_dev_gamepad/gcc/usb_dev_gamepad.bin Binary files differnew file mode 100644 index 0000000..ae9ea06 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_gamepad/gcc/usb_dev_gamepad.bin diff --git a/boards/ek-tm4c123gxl/usb_dev_gamepad/readme.txt b/boards/ek-tm4c123gxl/usb_dev_gamepad/readme.txt new file mode 100644 index 0000000..dd35e88 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_gamepad/readme.txt @@ -0,0 +1,31 @@ +USB HID Gamepad Device
+
+This example application turns the evaluation board into USB game pad
+device using the Human Interface Device gamepad class. The buttons on the
+board are reported as buttons 1 and 2. The X, Y, and Z coordinates are
+reported using the ADC input on GPIO port E pins 1, 2, and 3. The X input
+is on PE3, the Y input is on PE2 and the Z input is on PE1. These are
+not connected to any real input so the values simply read whatever is on
+the pins. To get valid values the pins should have voltage that range
+from VDDA(3V) to 0V. The blue LED on PF5 is used to indicate gamepad
+activity to the host and blinks when there is USB bus activity.
+
+-------------------------------------------------------------------------------
+
+Copyright (c) 2013-2014 Texas Instruments Incorporated. All rights reserved.
+Software License Agreement
+
+Texas Instruments (TI) is supplying this software for use solely and
+exclusively on TI's microcontroller products. The software is owned by
+TI and/or its suppliers, and is protected under applicable copyright
+laws. You may not combine this software with "viral" open-source
+software in order to form a larger program.
+
+THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+DAMAGES, FOR ANY REASON WHATSOEVER.
+
+This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
diff --git a/boards/ek-tm4c123gxl/usb_dev_gamepad/rvmdk/usb_dev_gamepad.axf b/boards/ek-tm4c123gxl/usb_dev_gamepad/rvmdk/usb_dev_gamepad.axf Binary files differnew file mode 100644 index 0000000..ccb05d1 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_gamepad/rvmdk/usb_dev_gamepad.axf diff --git a/boards/ek-tm4c123gxl/usb_dev_gamepad/rvmdk/usb_dev_gamepad.bin b/boards/ek-tm4c123gxl/usb_dev_gamepad/rvmdk/usb_dev_gamepad.bin Binary files differnew file mode 100644 index 0000000..d082e40 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_gamepad/rvmdk/usb_dev_gamepad.bin diff --git a/boards/ek-tm4c123gxl/usb_dev_gamepad/startup_ccs.c b/boards/ek-tm4c123gxl/usb_dev_gamepad/startup_ccs.c new file mode 100644 index 0000000..68a8758 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_gamepad/startup_ccs.c @@ -0,0 +1,303 @@ +//*****************************************************************************
+//
+// startup_ccs.c - Startup code for use with TI's Code Composer Studio.
+//
+// Copyright (c) 2013-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// External declaration for the reset handler that is to be called when the
+// processor is started
+//
+//*****************************************************************************
+extern void _c_int00(void);
+
+//*****************************************************************************
+//
+// Linker variable that marks the top of the stack.
+//
+//*****************************************************************************
+extern uint32_t __STACK_TOP;
+
+//*****************************************************************************
+//
+// External declarations for the interrupt handlers used by the application.
+//
+//*****************************************************************************
+extern void UARTStdioIntHandler(void);
+extern void USB0DeviceIntHandler(void);
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000 or at the start of
+// the program if located at a start address other than 0.
+//
+//*****************************************************************************
+#pragma DATA_SECTION(g_pfnVectors, ".intvecs")
+void (* const g_pfnVectors[])(void) =
+{
+ (void (*)(void))((uint32_t)&__STACK_TOP),
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ IntDefaultHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ UARTStdioIntHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ USB0DeviceIntHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ //
+ // Jump to the CCS C initialization routine. This will enable the
+ // floating-point unit as well, so that does not need to be done here.
+ //
+ __asm(" .global _c_int00\n"
+ " b.w _c_int00");
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/usb_dev_gamepad/startup_ewarm.c b/boards/ek-tm4c123gxl/usb_dev_gamepad/startup_ewarm.c new file mode 100644 index 0000000..7bb738f --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_gamepad/startup_ewarm.c @@ -0,0 +1,334 @@ +//*****************************************************************************
+//
+// startup_ewarm.c - Startup code for use with IAR's Embedded Workbench,
+// version 5.
+//
+// Copyright (c) 2013-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Enable the IAR extensions for this source file.
+//
+//*****************************************************************************
+#pragma language=extended
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// External declarations for the interrupt handlers used by the application.
+//
+//*****************************************************************************
+extern void UARTStdioIntHandler(void);
+extern void USB0DeviceIntHandler(void);
+
+//*****************************************************************************
+//
+// The entry point for the application startup code.
+//
+//*****************************************************************************
+extern void __iar_program_start(void);
+
+//*****************************************************************************
+//
+// Reserve space for the system stack.
+//
+//*****************************************************************************
+static uint32_t pui32Stack[256] @ ".noinit";
+
+//*****************************************************************************
+//
+// A union that describes the entries of the vector table. The union is needed
+// since the first entry is the stack pointer and the remainder are function
+// pointers.
+//
+//*****************************************************************************
+typedef union
+{
+ void (*pfnHandler)(void);
+ uint32_t ui32Ptr;
+}
+uVectorEntry;
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000.
+//
+//*****************************************************************************
+__root const uVectorEntry __vector_table[] @ ".intvec" =
+{
+ { .ui32Ptr = (uint32_t)pui32Stack + sizeof(pui32Stack) },
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ IntDefaultHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ UARTStdioIntHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ USB0DeviceIntHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ //
+ // Enable the floating-point unit. This must be done here to handle the
+ // case where main() uses floating-point and the function prologue saves
+ // floating-point registers (which will fault if floating-point is not
+ // enabled). Any configuration of the floating-point unit using DriverLib
+ // APIs must be done here prior to the floating-point unit being enabled.
+ //
+ // Note that this does not use DriverLib since it might not be included in
+ // this project.
+ //
+ HWREG(NVIC_CPAC) = ((HWREG(NVIC_CPAC) &
+ ~(NVIC_CPAC_CP10_M | NVIC_CPAC_CP11_M)) |
+ NVIC_CPAC_CP10_FULL | NVIC_CPAC_CP11_FULL);
+
+ //
+ // Call the application's entry point.
+ //
+ __iar_program_start();
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/usb_dev_gamepad/startup_gcc.c b/boards/ek-tm4c123gxl/usb_dev_gamepad/startup_gcc.c new file mode 100644 index 0000000..a3e1d59 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_gamepad/startup_gcc.c @@ -0,0 +1,350 @@ +//*****************************************************************************
+//
+// startup_gcc.c - Startup code for use with GNU tools.
+//
+// Copyright (c) 2013-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// External declarations for the interrupt handlers used by the application.
+//
+//*****************************************************************************
+extern void UARTStdioIntHandler(void);
+extern void USB0DeviceIntHandler(void);
+
+//*****************************************************************************
+//
+// The entry point for the application.
+//
+//*****************************************************************************
+extern int main(void);
+
+//*****************************************************************************
+//
+// Reserve space for the system stack.
+//
+//*****************************************************************************
+static uint32_t pui32Stack[256];
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000.
+//
+//*****************************************************************************
+__attribute__ ((section(".isr_vector")))
+void (* const g_pfnVectors[])(void) =
+{
+ (void (*)(void))((uint32_t)pui32Stack + sizeof(pui32Stack)),
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ IntDefaultHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ UARTStdioIntHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ USB0DeviceIntHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// The following are constructs created by the linker, indicating where the
+// the "data" and "bss" segments reside in memory. The initializers for the
+// for the "data" segment resides immediately following the "text" segment.
+//
+//*****************************************************************************
+extern uint32_t _etext;
+extern uint32_t _data;
+extern uint32_t _edata;
+extern uint32_t _bss;
+extern uint32_t _ebss;
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ uint32_t *pui32Src, *pui32Dest;
+
+ //
+ // Copy the data segment initializers from flash to SRAM.
+ //
+ pui32Src = &_etext;
+ for(pui32Dest = &_data; pui32Dest < &_edata; )
+ {
+ *pui32Dest++ = *pui32Src++;
+ }
+
+ //
+ // Zero fill the bss segment.
+ //
+ __asm(" ldr r0, =_bss\n"
+ " ldr r1, =_ebss\n"
+ " mov r2, #0\n"
+ " .thumb_func\n"
+ "zero_loop:\n"
+ " cmp r0, r1\n"
+ " it lt\n"
+ " strlt r2, [r0], #4\n"
+ " blt zero_loop");
+
+ //
+ // Enable the floating-point unit. This must be done here to handle the
+ // case where main() uses floating-point and the function prologue saves
+ // floating-point registers (which will fault if floating-point is not
+ // enabled). Any configuration of the floating-point unit using DriverLib
+ // APIs must be done here prior to the floating-point unit being enabled.
+ //
+ // Note that this does not use DriverLib since it might not be included in
+ // this project.
+ //
+ HWREG(NVIC_CPAC) = ((HWREG(NVIC_CPAC) &
+ ~(NVIC_CPAC_CP10_M | NVIC_CPAC_CP11_M)) |
+ NVIC_CPAC_CP10_FULL | NVIC_CPAC_CP11_FULL);
+
+ //
+ // Call the application's entry point.
+ //
+ main();
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/usb_dev_gamepad/startup_rvmdk.S b/boards/ek-tm4c123gxl/usb_dev_gamepad/startup_rvmdk.S new file mode 100644 index 0000000..56c7f44 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_gamepad/startup_rvmdk.S @@ -0,0 +1,359 @@ +; <<< Use Configuration Wizard in Context Menu >>>
+;******************************************************************************
+;
+; startup_rvmdk.S - Startup code for use with Keil's uVision.
+;
+; Copyright (c) 2013-2014 Texas Instruments Incorporated. All rights reserved.
+; Software License Agreement
+;
+; Texas Instruments (TI) is supplying this software for use solely and
+; exclusively on TI's microcontroller products. The software is owned by
+; TI and/or its suppliers, and is protected under applicable copyright
+; laws. You may not combine this software with "viral" open-source
+; software in order to form a larger program.
+;
+; THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+; NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+; NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+; A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+; CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+; DAMAGES, FOR ANY REASON WHATSOEVER.
+;
+; This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+;
+;******************************************************************************
+
+;******************************************************************************
+;
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+;******************************************************************************
+Stack EQU 0x00000400
+
+;******************************************************************************
+;
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+;******************************************************************************
+Heap EQU 0x00000000
+
+;******************************************************************************
+;
+; Allocate space for the stack.
+;
+;******************************************************************************
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+StackMem
+ SPACE Stack
+__initial_sp
+
+;******************************************************************************
+;
+; Allocate space for the heap.
+;
+;******************************************************************************
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+HeapMem
+ SPACE Heap
+__heap_limit
+
+;******************************************************************************
+;
+; Indicate that the code in this file preserves 8-byte alignment of the stack.
+;
+;******************************************************************************
+ PRESERVE8
+
+;******************************************************************************
+;
+; Place code into the reset code section.
+;
+;******************************************************************************
+ AREA RESET, CODE, READONLY
+ THUMB
+
+;******************************************************************************
+;
+; External declarations for the interrupt handlers used by the application.
+;
+;******************************************************************************
+ EXTERN UARTStdioIntHandler
+ EXTERN USB0DeviceIntHandler
+
+;******************************************************************************
+;
+; The vector table.
+;
+;******************************************************************************
+ EXPORT __Vectors
+__Vectors
+ DCD StackMem + Stack ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NmiSR ; NMI Handler
+ DCD FaultISR ; Hard Fault Handler
+ DCD IntDefaultHandler ; The MPU fault handler
+ DCD IntDefaultHandler ; The bus fault handler
+ DCD IntDefaultHandler ; The usage fault handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; SVCall handler
+ DCD IntDefaultHandler ; Debug monitor handler
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; The PendSV handler
+ DCD IntDefaultHandler ; The SysTick handler
+ DCD IntDefaultHandler ; GPIO Port A
+ DCD IntDefaultHandler ; GPIO Port B
+ DCD IntDefaultHandler ; GPIO Port C
+ DCD IntDefaultHandler ; GPIO Port D
+ DCD IntDefaultHandler ; GPIO Port E
+ DCD UARTStdioIntHandler ; UART0 Rx and Tx
+ DCD IntDefaultHandler ; UART1 Rx and Tx
+ DCD IntDefaultHandler ; SSI0 Rx and Tx
+ DCD IntDefaultHandler ; I2C0 Master and Slave
+ DCD IntDefaultHandler ; PWM Fault
+ DCD IntDefaultHandler ; PWM Generator 0
+ DCD IntDefaultHandler ; PWM Generator 1
+ DCD IntDefaultHandler ; PWM Generator 2
+ DCD IntDefaultHandler ; Quadrature Encoder 0
+ DCD IntDefaultHandler ; ADC Sequence 0
+ DCD IntDefaultHandler ; ADC Sequence 1
+ DCD IntDefaultHandler ; ADC Sequence 2
+ DCD IntDefaultHandler ; ADC Sequence 3
+ DCD IntDefaultHandler ; Watchdog timer
+ DCD IntDefaultHandler ; Timer 0 subtimer A
+ DCD IntDefaultHandler ; Timer 0 subtimer B
+ DCD IntDefaultHandler ; Timer 1 subtimer A
+ DCD IntDefaultHandler ; Timer 1 subtimer B
+ DCD IntDefaultHandler ; Timer 2 subtimer A
+ DCD IntDefaultHandler ; Timer 2 subtimer B
+ DCD IntDefaultHandler ; Analog Comparator 0
+ DCD IntDefaultHandler ; Analog Comparator 1
+ DCD IntDefaultHandler ; Analog Comparator 2
+ DCD IntDefaultHandler ; System Control (PLL, OSC, BO)
+ DCD IntDefaultHandler ; FLASH Control
+ DCD IntDefaultHandler ; GPIO Port F
+ DCD IntDefaultHandler ; GPIO Port G
+ DCD IntDefaultHandler ; GPIO Port H
+ DCD IntDefaultHandler ; UART2 Rx and Tx
+ DCD IntDefaultHandler ; SSI1 Rx and Tx
+ DCD IntDefaultHandler ; Timer 3 subtimer A
+ DCD IntDefaultHandler ; Timer 3 subtimer B
+ DCD IntDefaultHandler ; I2C1 Master and Slave
+ DCD IntDefaultHandler ; Quadrature Encoder 1
+ DCD IntDefaultHandler ; CAN0
+ DCD IntDefaultHandler ; CAN1
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; Hibernate
+ DCD USB0DeviceIntHandler ; USB0
+ DCD IntDefaultHandler ; PWM Generator 3
+ DCD IntDefaultHandler ; uDMA Software Transfer
+ DCD IntDefaultHandler ; uDMA Error
+ DCD IntDefaultHandler ; ADC1 Sequence 0
+ DCD IntDefaultHandler ; ADC1 Sequence 1
+ DCD IntDefaultHandler ; ADC1 Sequence 2
+ DCD IntDefaultHandler ; ADC1 Sequence 3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; GPIO Port J
+ DCD IntDefaultHandler ; GPIO Port K
+ DCD IntDefaultHandler ; GPIO Port L
+ DCD IntDefaultHandler ; SSI2 Rx and Tx
+ DCD IntDefaultHandler ; SSI3 Rx and Tx
+ DCD IntDefaultHandler ; UART3 Rx and Tx
+ DCD IntDefaultHandler ; UART4 Rx and Tx
+ DCD IntDefaultHandler ; UART5 Rx and Tx
+ DCD IntDefaultHandler ; UART6 Rx and Tx
+ DCD IntDefaultHandler ; UART7 Rx and Tx
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; I2C2 Master and Slave
+ DCD IntDefaultHandler ; I2C3 Master and Slave
+ DCD IntDefaultHandler ; Timer 4 subtimer A
+ DCD IntDefaultHandler ; Timer 4 subtimer B
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; Timer 5 subtimer A
+ DCD IntDefaultHandler ; Timer 5 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 0 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 0 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 1 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 1 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 2 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 2 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 3 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 3 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 4 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 4 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 5 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 5 subtimer B
+ DCD IntDefaultHandler ; FPU
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; I2C4 Master and Slave
+ DCD IntDefaultHandler ; I2C5 Master and Slave
+ DCD IntDefaultHandler ; GPIO Port M
+ DCD IntDefaultHandler ; GPIO Port N
+ DCD IntDefaultHandler ; Quadrature Encoder 2
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; GPIO Port P (Summary or P0)
+ DCD IntDefaultHandler ; GPIO Port P1
+ DCD IntDefaultHandler ; GPIO Port P2
+ DCD IntDefaultHandler ; GPIO Port P3
+ DCD IntDefaultHandler ; GPIO Port P4
+ DCD IntDefaultHandler ; GPIO Port P5
+ DCD IntDefaultHandler ; GPIO Port P6
+ DCD IntDefaultHandler ; GPIO Port P7
+ DCD IntDefaultHandler ; GPIO Port Q (Summary or Q0)
+ DCD IntDefaultHandler ; GPIO Port Q1
+ DCD IntDefaultHandler ; GPIO Port Q2
+ DCD IntDefaultHandler ; GPIO Port Q3
+ DCD IntDefaultHandler ; GPIO Port Q4
+ DCD IntDefaultHandler ; GPIO Port Q5
+ DCD IntDefaultHandler ; GPIO Port Q6
+ DCD IntDefaultHandler ; GPIO Port Q7
+ DCD IntDefaultHandler ; GPIO Port R
+ DCD IntDefaultHandler ; GPIO Port S
+ DCD IntDefaultHandler ; PWM 1 Generator 0
+ DCD IntDefaultHandler ; PWM 1 Generator 1
+ DCD IntDefaultHandler ; PWM 1 Generator 2
+ DCD IntDefaultHandler ; PWM 1 Generator 3
+ DCD IntDefaultHandler ; PWM 1 Fault
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor first starts execution
+; following a reset event.
+;
+;******************************************************************************
+ EXPORT Reset_Handler
+Reset_Handler
+ ;
+ ; Enable the floating-point unit. This must be done here to handle the
+ ; case where main() uses floating-point and the function prologue saves
+ ; floating-point registers (which will fault if floating-point is not
+ ; enabled). Any configuration of the floating-point unit using
+ ; DriverLib APIs must be done here prior to the floating-point unit
+ ; being enabled.
+ ;
+ ; Note that this does not use DriverLib since it might not be included
+ ; in this project.
+ ;
+ MOVW R0, #0xED88
+ MOVT R0, #0xE000
+ LDR R1, [R0]
+ ORR R1, #0x00F00000
+ STR R1, [R0]
+
+ ;
+ ; Call the C library enty point that handles startup. This will copy
+ ; the .data section initializers from flash to SRAM and zero fill the
+ ; .bss section.
+ ;
+ IMPORT __main
+ B __main
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives a NMI. This
+; simply enters an infinite loop, preserving the system state for examination
+; by a debugger.
+;
+;******************************************************************************
+NmiSR
+ B NmiSR
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives a fault
+; interrupt. This simply enters an infinite loop, preserving the system state
+; for examination by a debugger.
+;
+;******************************************************************************
+FaultISR
+ B FaultISR
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives an unexpected
+; interrupt. This simply enters an infinite loop, preserving the system state
+; for examination by a debugger.
+;
+;******************************************************************************
+IntDefaultHandler
+ B IntDefaultHandler
+
+;******************************************************************************
+;
+; Make sure the end of this section is aligned.
+;
+;******************************************************************************
+ ALIGN
+
+;******************************************************************************
+;
+; Some code in the normal code section for initializing the heap and stack.
+;
+;******************************************************************************
+ AREA |.text|, CODE, READONLY
+
+;******************************************************************************
+;
+; The function expected of the C library startup code for defining the stack
+; and heap memory locations. For the C library version of the startup code,
+; provide this function so that the C library initialization code can find out
+; the location of the stack and heap.
+;
+;******************************************************************************
+ IF :DEF: __MICROLIB
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+ ELSE
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+__user_initial_stackheap
+ LDR R0, =HeapMem
+ LDR R1, =(StackMem + Stack)
+ LDR R2, =(HeapMem + Heap)
+ LDR R3, =StackMem
+ BX LR
+ ENDIF
+
+;******************************************************************************
+;
+; Make sure the end of this section is aligned.
+;
+;******************************************************************************
+ ALIGN
+
+;******************************************************************************
+;
+; Tell the assembler that we're done.
+;
+;******************************************************************************
+ END
diff --git a/boards/ek-tm4c123gxl/usb_dev_gamepad/usb_dev_gamepad.c b/boards/ek-tm4c123gxl/usb_dev_gamepad/usb_dev_gamepad.c new file mode 100644 index 0000000..ff90f51 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_gamepad/usb_dev_gamepad.c @@ -0,0 +1,552 @@ +//*****************************************************************************
+//
+// usb_dev_gamepad.c - Main routines for the gamepad example.
+//
+// Copyright (c) 2013-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdbool.h>
+#include <stdint.h>
+#include "inc/hw_memmap.h"
+#include "inc/hw_types.h"
+#include "inc/hw_gpio.h"
+#include "inc/hw_sysctl.h"
+#include "driverlib/adc.h"
+#include "driverlib/debug.h"
+#include "driverlib/gpio.h"
+#include "driverlib/interrupt.h"
+#include "driverlib/pin_map.h"
+#include "driverlib/rom.h"
+#include "driverlib/sysctl.h"
+#include "driverlib/uart.h"
+#include "usblib/usblib.h"
+#include "usblib/usbhid.h"
+#include "usblib/device/usbdevice.h"
+#include "usblib/device/usbdhid.h"
+#include "usblib/device/usbdhidgamepad.h"
+#include "usb_gamepad_structs.h"
+#include "drivers/buttons.h"
+#include "utils/uartstdio.h"
+
+//*****************************************************************************
+//
+//! \addtogroup example_list
+//! <h1>USB HID Gamepad Device (usb_dev_gamepad)</h1>
+//!
+//! This example application turns the evaluation board into USB game pad
+//! device using the Human Interface Device gamepad class. The buttons on the
+//! board are reported as buttons 1 and 2. The X, Y, and Z coordinates are
+//! reported using the ADC input on GPIO port E pins 1, 2, and 3. The X input
+//! is on PE3, the Y input is on PE2 and the Z input is on PE1. These are
+//! not connected to any real input so the values simply read whatever is on
+//! the pins. To get valid values the pins should have voltage that range
+//! from VDDA(3V) to 0V. The blue LED on PF5 is used to indicate gamepad
+//! activity to the host and blinks when there is USB bus activity.
+//
+//*****************************************************************************
+
+//*****************************************************************************
+//
+// The HID gamepad report that is returned to the host.
+//
+//*****************************************************************************
+static tGamepadReport sReport;
+
+//*****************************************************************************
+//
+// The HID gamepad polled ADC data for the X/Y/Z coordinates.
+//
+//*****************************************************************************
+static uint32_t g_pui32ADCData[3];
+
+//*****************************************************************************
+//
+// An activity counter to slow the LED blink down to a visible rate.
+//
+//*****************************************************************************
+static uint32_t g_ui32Updates;
+
+//*****************************************************************************
+//
+// This enumeration holds the various states that the gamepad can be in during
+// normal operation.
+//
+//*****************************************************************************
+volatile enum
+{
+ //
+ // Not yet configured.
+ //
+ eStateNotConfigured,
+
+ //
+ // Connected and not waiting on data to be sent.
+ //
+ eStateIdle,
+
+ //
+ // Suspended.
+ //
+ eStateSuspend,
+
+ //
+ // Connected and waiting on data to be sent out.
+ //
+ eStateSending
+}
+g_iGamepadState;
+
+//*****************************************************************************
+//
+// The error routine that is called if the driver library encounters an error.
+//
+//*****************************************************************************
+#ifdef DEBUG
+void
+__error__(char *pcFilename, uint32_t ui32Line)
+{
+}
+#endif
+
+//*****************************************************************************
+//
+// Macro used to convert the 12-bit unsigned values to an eight bit signed
+// value returned in the HID report. This maps the values from the ADC that
+// range from 0 to 2047 over to 127 to -128.
+//
+//*****************************************************************************
+#define Convert8Bit(ui32Value) ((int8_t)((0x7ff - ui32Value) >> 4))
+
+//*****************************************************************************
+//
+// Handles asynchronous events from the HID gamepad driver.
+//
+// \param pvCBData is the event callback pointer provided during
+// USBDHIDGamepadInit(). This is a pointer to our gamepad device structure
+// (&g_sGamepadDevice).
+// \param ui32Event identifies the event we are being called back for.
+// \param ui32MsgData is an event-specific value.
+// \param pvMsgData is an event-specific pointer.
+//
+// This function is called by the HID gamepad driver to inform the application
+// of particular asynchronous events related to operation of the gamepad HID
+// device.
+//
+// \return Returns 0 in all cases.
+//
+//*****************************************************************************
+uint32_t
+GamepadHandler(void *pvCBData, uint32_t ui32Event, uint32_t ui32MsgData,
+ void *pvMsgData)
+{
+ switch (ui32Event)
+ {
+ //
+ // The host has connected to us and configured the device.
+ //
+ case USB_EVENT_CONNECTED:
+ {
+ g_iGamepadState = eStateIdle;
+
+ //
+ // Update the status.
+ //
+ UARTprintf("\nHost Connected...\n");
+
+ break;
+ }
+
+ //
+ // The host has disconnected from us.
+ //
+ case USB_EVENT_DISCONNECTED:
+ {
+ g_iGamepadState = eStateNotConfigured;
+
+ //
+ // Update the status.
+ //
+ UARTprintf("\nHost Disconnected...\n");
+
+ break;
+ }
+
+ //
+ // This event occurs every time the host acknowledges transmission
+ // of a report. It is to return to the idle state so that a new report
+ // can be sent to the host.
+ //
+ case USB_EVENT_TX_COMPLETE:
+ {
+ //
+ // Enter the idle state since we finished sending something.
+ //
+ g_iGamepadState = eStateIdle;
+
+ ROM_GPIOPinWrite(GPIO_PORTF_BASE, GPIO_PIN_2, 0);
+
+ break;
+ }
+
+ //
+ // This event indicates that the host has suspended the USB bus.
+ //
+ case USB_EVENT_SUSPEND:
+ {
+ //
+ // Go to the suspended state.
+ //
+ g_iGamepadState = eStateSuspend;
+
+ //
+ // Suspended.
+ //
+ UARTprintf("\nBus Suspended\n");
+
+ ROM_GPIOPinWrite(GPIO_PORTF_BASE, GPIO_PIN_2, 0);
+
+ break;
+ }
+
+ //
+ // This event signals that the host has resumed signaling on the bus.
+ //
+ case USB_EVENT_RESUME:
+ {
+ //
+ // Go back to the idle state.
+ //
+ g_iGamepadState = eStateIdle;
+
+ //
+ // Resume signaled.
+ //
+ UARTprintf("\nBus Resume\n");
+
+ break;
+ }
+
+ //
+ // Return the pointer to the current report. This call is
+ // rarely if ever made, but is required by the USB HID
+ // specification.
+ //
+ case USBD_HID_EVENT_GET_REPORT:
+ {
+ *(void **)pvMsgData = (void *)&sReport;
+
+ break;
+ }
+
+ //
+ // We ignore all other events.
+ //
+ default:
+ {
+ break;
+ }
+ }
+
+ return(0);
+}
+
+//*****************************************************************************
+//
+// Configure the UART and its pins. This must be called before UARTprintf().
+//
+//*****************************************************************************
+void
+ConfigureUART(void)
+{
+ //
+ // Enable the GPIO Peripheral used by the UART.
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOA);
+
+ //
+ // Enable UART0
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_UART0);
+
+ //
+ // Configure GPIO Pins for UART mode.
+ //
+ ROM_GPIOPinConfigure(GPIO_PA0_U0RX);
+ ROM_GPIOPinConfigure(GPIO_PA1_U0TX);
+ ROM_GPIOPinTypeUART(GPIO_PORTA_BASE, GPIO_PIN_0 | GPIO_PIN_1);
+
+ //
+ // Use the internal 16MHz oscillator as the UART clock source.
+ //
+ UARTClockSourceSet(UART0_BASE, UART_CLOCK_PIOSC);
+
+ //
+ // Initialize the UART for console I/O.
+ //
+ UARTStdioConfig(0, 115200, 16000000);
+}
+
+//*****************************************************************************
+//
+// Initialize the ADC inputs used by the game pad device. This example uses
+// the ADC pins on Port E pins 1, 2, and 3(AIN0-2).
+//
+//*****************************************************************************
+void
+ADCInit(void)
+{
+ int32_t ui32Chan;
+
+ //
+ // Enable the GPIOs and the ADC used by this example.
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOE);
+ SysCtlGPIOAHBEnable(SYSCTL_PERIPH_GPIOE);
+
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_ADC0);
+ ROM_SysCtlPeripheralReset(SYSCTL_PERIPH_ADC0);
+
+ //
+ // Select the external reference for greatest accuracy.
+ //
+ ROM_ADCReferenceSet(ADC0_BASE, ADC_REF_EXT_3V);
+
+ //
+ // Configure the pins which are used as analog inputs.
+ //
+ ROM_GPIOPinTypeADC(GPIO_PORTE_AHB_BASE, GPIO_PIN_3 | GPIO_PIN_2 |
+ GPIO_PIN_1);
+
+ //
+ // Configure the sequencer for 3 steps.
+ //
+ for(ui32Chan = 0; ui32Chan < 2; ui32Chan++)
+ {
+ //
+ // Configure the sequence step
+ //
+ ROM_ADCSequenceStepConfigure(ADC0_BASE, 0, ui32Chan, ui32Chan);
+ }
+
+ ROM_ADCSequenceStepConfigure(ADC0_BASE, 0, 2, ADC_CTL_CH2 | ADC_CTL_IE |
+ ADC_CTL_END);
+ //
+ // Enable the sequence but do not start it yet.
+ //
+ ROM_ADCSequenceEnable(ADC0_BASE, 0);
+}
+
+//*****************************************************************************
+//
+// This is the main loop that runs the application.
+//
+//*****************************************************************************
+int
+main(void)
+{
+ uint8_t ui8ButtonsChanged, ui8Buttons;
+ bool bUpdate;
+
+ //
+ // Set the clocking to run from the PLL at 50MHz
+ //
+ ROM_SysCtlClockSet(SYSCTL_SYSDIV_4 | SYSCTL_USE_PLL | SYSCTL_OSC_MAIN |
+ SYSCTL_XTAL_16MHZ);
+
+ //
+ // Enable the GPIO port that is used for the on-board LED.
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOF);
+
+ //
+ // Enable the GPIO pin for the Blue LED (PF2).
+ //
+ ROM_GPIOPinTypeGPIOOutput(GPIO_PORTF_BASE, GPIO_PIN_2);
+
+ //
+ // Open UART0 and show the application name on the UART.
+ //
+ ConfigureUART();
+
+ UARTprintf("\033[2JTiva C Series USB gamepad device example\n");
+ UARTprintf("---------------------------------\n\n");
+
+ //
+ // Not configured initially.
+ //
+ g_iGamepadState = eStateNotConfigured;
+
+ //
+ // Enable the GPIO peripheral used for USB, and configure the USB
+ // pins.
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOD);
+ SysCtlGPIOAHBEnable(SYSCTL_PERIPH_GPIOD);
+ ROM_GPIOPinTypeUSBAnalog(GPIO_PORTD_AHB_BASE, GPIO_PIN_4 | GPIO_PIN_5);
+
+ //
+ // Configure the GPIOS for the buttons.
+ //
+ ButtonsInit();
+
+ //
+ // Initialize the ADC channels.
+ //
+ ADCInit();
+
+ //
+ // Tell the user what we are up to.
+ //
+ UARTprintf("Configuring USB\n");
+
+ //
+ // Set the USB stack mode to Device mode.
+ //
+ USBStackModeSet(0, eUSBModeForceDevice, 0);
+
+ //
+ // Pass the device information to the USB library and place the device
+ // on the bus.
+ //
+ USBDHIDGamepadInit(0, &g_sGamepadDevice);
+
+ //
+ // Zero out the initial report.
+ //
+ sReport.ui8Buttons = 0;
+ sReport.i8XPos = 0;
+ sReport.i8YPos = 0;
+ sReport.i8ZPos = 0;
+
+ //
+ // Tell the user what we are doing and provide some basic instructions.
+ //
+ UARTprintf("\nWaiting For Host...\n");
+
+ //
+ // Trigger an initial ADC sequence.
+ //
+ ADCProcessorTrigger(ADC0_BASE, 0);
+
+ //
+ // The main loop starts here. We begin by waiting for a host connection
+ // then drop into the main gamepad handling section. If the host
+ // disconnects, we return to the top and wait for a new connection.
+ //
+ while(1)
+ {
+ //
+ // Wait here until USB device is connected to a host.
+ //
+ if(g_iGamepadState == eStateIdle)
+ {
+ //
+ // No update by default.
+ //
+ bUpdate = false;
+
+ //
+ // See if the buttons updated.
+ //
+ ButtonsPoll(&ui8ButtonsChanged, &ui8Buttons);
+
+ sReport.ui8Buttons = 0;
+
+ //
+ // Set button 1 if left pressed.
+ //
+ if(ui8Buttons & LEFT_BUTTON)
+ {
+ sReport.ui8Buttons |= 0x01;
+ }
+
+ //
+ // Set button 2 if right pressed.
+ //
+ if(ui8Buttons & RIGHT_BUTTON)
+ {
+ sReport.ui8Buttons |= 0x02;
+ }
+
+ if(ui8ButtonsChanged)
+ {
+ bUpdate = true;
+ }
+
+ //
+ // See if the ADC updated.
+ //
+ if(ADCIntStatus(ADC0_BASE, 0, false) != 0)
+ {
+ //
+ // Clear the ADC interrupt.
+ //
+ ADCIntClear(ADC0_BASE, 0);
+
+ //
+ // Read the data and trigger a new sample request.
+ //
+ ADCSequenceDataGet(ADC0_BASE, 0, &g_pui32ADCData[0]);
+ ADCProcessorTrigger(ADC0_BASE, 0);
+
+ //
+ // Update the report.
+ //
+ sReport.i8XPos = Convert8Bit(g_pui32ADCData[0]);
+ sReport.i8YPos = Convert8Bit(g_pui32ADCData[1]);
+ sReport.i8ZPos = Convert8Bit(g_pui32ADCData[2]);
+ bUpdate = true;
+ }
+
+ //
+ // Send the report if there was an update.
+ //
+ if(bUpdate)
+ {
+ USBDHIDGamepadSendReport(&g_sGamepadDevice, &sReport,
+ sizeof(sReport));
+
+ //
+ // Now sending data but protect this from an interrupt since
+ // it can change in interrupt context as well.
+ //
+ IntMasterDisable();
+ g_iGamepadState = eStateSending;
+ IntMasterEnable();
+
+ //
+ // Limit the blink rate of the LED.
+ //
+ if(g_ui32Updates++ == 40)
+ {
+ //
+ // Turn on the blue LED.
+ //
+ ROM_GPIOPinWrite(GPIO_PORTF_BASE, GPIO_PIN_2, GPIO_PIN_2);
+
+ //
+ // Reset the update count.
+ //
+ g_ui32Updates = 0;
+ }
+ }
+ }
+ }
+}
diff --git a/boards/ek-tm4c123gxl/usb_dev_gamepad/usb_dev_gamepad.ewd b/boards/ek-tm4c123gxl/usb_dev_gamepad/usb_dev_gamepad.ewd new file mode 100644 index 0000000..7a32408 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_gamepad/usb_dev_gamepad.ewd @@ -0,0 +1,614 @@ +<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+ <fileVersion>1</fileVersion>
+ <configuration>
+ <name>Debug</name>
+ <toolchain>
+ <name>ARM</name>
+ </toolchain>
+ <debug>1</debug>
+ <settings>
+ <name>C-SPY</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>15</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CInput</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CEndian</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCVariant</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>MemOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MemFile</name>
+ <state>$TOOLKIT_DIR$\CONFIG\debugger\TexasInstruments\tm4c123gh6pm</state>
+ </option>
+ <option>
+ <name>RunToEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>RunToName</name>
+ <state>main</state>
+ </option>
+ <option>
+ <name>CExtraOptionsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCDDFArgumentProducer</name>
+ <state></state>
+ </option>
+ <option>
+ <name>OCDownloadSuppressDownload</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDownloadVerifyAll</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OCDynDriverList</name>
+ <state>LMIFTDI_ID</state>
+ </option>
+ <option>
+ <name>OCLastSavedByProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OCDownloadAttachToProgram</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FlashLoaders</name>
+ <state>,,,,(default),</state>
+ </option>
+ <option>
+ <name>UseFlashLoader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CLowLevel</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCBE8Slave</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ARMSIM_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCSimDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCSimEnablePSP</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCSimPspOverrideConfig</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCSimPspConfigFile</name>
+ <state></state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ANGEL_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CCAngelHeartbeat</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CAngelCommunication</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CAngelCommBaud</name>
+ <version>0</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>CAngelCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ANGELTCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoAngelLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AngelLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>GDBSERVER_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>TCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>LogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCJTagBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>IARROM_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CRomLogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomLogFileEditB</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CRomCommunication</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomCommBaud</name>
+ <version>0</version>
+ <state>7</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>JLINK_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>9</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>JLinkSpeed</name>
+ <state>32</state>
+ </option>
+ <option>
+ <name>CCJLinkDoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCJLinkHWResetDelay</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>JLinkInitialSpeed</name>
+ <state>32</state>
+ </option>
+ <option>
+ <name>CCDoJlinkMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCScanChainNonARMDevices</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkIRLength</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkCommRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkTCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>CCJLinkSpeedRadioV2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCUSBDevice</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchUndef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchSWI</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchData</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchPrefetch</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchIRQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchFIQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ <option>
+ <name>CCJLinkInterfaceRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCJLinkAttachSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCJLinkResetList</name>
+ <version>0</version>
+ <state>5</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>LMIFTDI_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>LmiftdiSpeed</name>
+ <state>500</state>
+ </option>
+ <option>
+ <name>CCLmiftdiDoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCLmiftdiLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>MACRAIGOR_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>2</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>jtag</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>EmuSpeed</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>TCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>LogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>DoEmuMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>EmuMultiTarget</name>
+ <state>0@ARM7TDMI</state>
+ </option>
+ <option>
+ <name>EmuHWReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CEmuCommBaud</name>
+ <version>0</version>
+ <state>4</state>
+ </option>
+ <option>
+ <name>CEmuCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>jtago</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>UnusedAddr</name>
+ <state>0x00800000</state>
+ </option>
+ <option>
+ <name>CCMacraigorHWResetDelay</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCJTagBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>RDI_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CRDIDriverDll</name>
+ <state>Browse to your RDI driver</state>
+ </option>
+ <option>
+ <name>CRDILogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRDILogFileEdit</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCRDIHWReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchUndef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchSWI</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchData</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchPrefetch</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchIRQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchFIQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDIUseETM</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>THIRDPARTY_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CThirdPartyDriverDll</name>
+ <state>Browse to your third-party driver</state>
+ </option>
+ <option>
+ <name>CThirdPartyLogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CThirdPartyLogFileEditB</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <debuggerPlugins>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\OSE\OseEpsilonPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Profiling\Profiling.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ </debuggerPlugins>
+ </configuration>
+</project>
diff --git a/boards/ek-tm4c123gxl/usb_dev_gamepad/usb_dev_gamepad.ewp b/boards/ek-tm4c123gxl/usb_dev_gamepad/usb_dev_gamepad.ewp new file mode 100644 index 0000000..b2b007c --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_gamepad/usb_dev_gamepad.ewp @@ -0,0 +1,799 @@ +<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+ <fileVersion>1</fileVersion>
+ <configuration>
+ <name>Debug</name>
+ <toolchain>
+ <name>ARM</name>
+ </toolchain>
+ <debug>1</debug>
+ <settings>
+ <name>General</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <version>14</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>ExePath</name>
+ <state>ewarm\Exe</state>
+ </option>
+ <option>
+ <name>ObjPath</name>
+ <state>ewarm\Obj</state>
+ </option>
+ <option>
+ <name>ListPath</name>
+ <state>ewarm\List</state>
+ </option>
+ <option>
+ <name>Variant</name>
+ <version>19</version>
+ <state>39</state>
+ </option>
+ <option>
+ <name>GEndianMode</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>Input variant</name>
+ <version>1</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>Input description</name>
+ <state>No specifier n, no float nor long long, no scan set, no assignment suppressing.</state>
+ </option>
+ <option>
+ <name>Output variant</name>
+ <version>0</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>Output description</name>
+ <state>No specifier a, A, no specifier n, no float nor long long, no flags.</state>
+ </option>
+ <option>
+ <name>GOutputBinary</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FPU</name>
+ <version>2</version>
+ <state>5</state>
+ </option>
+ <option>
+ <name>OGCoreOrChip</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelect</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelectSlave</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>RTDescription</name>
+ <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+ </option>
+ <option>
+ <name>RTConfigPath</name>
+ <state>$TOOLKIT_DIR$\INC\DLib_Config_Normal.h</state>
+ </option>
+ <option>
+ <name>OGProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OGLastSavedByProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>GeneralMisraRules</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>GeneralEnableMisra</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GeneralMisraVerbose</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGChipSelectEditMenu</name>
+ <state>TM4C123GH6PM TexasInstruments TM4C123GH6PM</state>
+ </option>
+ <option>
+ <name>GenLowLevelInterface</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GEndianModeBE</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OGBufferedTerminalOutput</name>
+ <state>0</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ICCARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>19</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CCDefines</name>
+ <state>ewarm</state>
+ <state>PART_TM4C123GH6PM</state>
+ <state>TARGET_IS_TM4C123_RA1</state>
+ <state>UART_BUFFERED</state>
+ </option>
+ <option>
+ <name>CCPreprocFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocComments</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMnemonics</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMessages</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssSource</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagSuppress</name>
+ <state>Pa050</state>
+ </option>
+ <option>
+ <name>CCDiagRemark</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCDiagWarning</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCDiagError</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCAllowList</name>
+ <version>1</version>
+ <state>1111111</state>
+ </option>
+ <option>
+ <name>CCDebugInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IEndianMode</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IExtraOptionsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCLangConformance</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCSignedPlainChar</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCRequirePrototypes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagWarnAreErr</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCCompilerRuntimeInfo</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OutputFile</name>
+ <state>$FILE_BNAME$.o</state>
+ </option>
+ <option>
+ <name>CCLangSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCLibConfigHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>PreInclude</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CompilerMisraRules</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>CompilerMisraOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCIncludePath2</name>
+ <state>$PROJ_DIR$\..</state>
+ <state>$PROJ_DIR$\..\..\..\..</state>
+ </option>
+ <option>
+ <name>CCStdIncCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCStdIncludePath</name>
+ <state>$TOOLKIT_DIR$\INC\</state>
+ </option>
+ <option>
+ <name>CCCodeSection</name>
+ <state>.text</state>
+ </option>
+ <option>
+ <name>IInterwork2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IProcessorMode2</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptLevel</name>
+ <state>3</state>
+ </option>
+ <option>
+ <name>CCOptStrategy</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptLevelSlave</name>
+ <state>3</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>AARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>7</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>AObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AEndian</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>ACaseSensitivity</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacroChars</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnEnable</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnWhat</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnOne</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AWarnRange1</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AWarnRange2</name>
+ <state></state>
+ </option>
+ <option>
+ <name>ADebug</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AltRegisterNames</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ADefines</name>
+ <state>ewarm</state>
+ </option>
+ <option>
+ <name>AList</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AListHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AListing</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>Includes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacDefs</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacExps</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacExec</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OnlyAssed</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MultiLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLengthCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLength</name>
+ <state>80</state>
+ </option>
+ <option>
+ <name>TabSpacing</name>
+ <state>8</state>
+ </option>
+ <option>
+ <name>AXRef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDefines</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefInternal</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDual</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AOutputFile</name>
+ <state>$FILE_BNAME$.o</state>
+ </option>
+ <option>
+ <name>AMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ALimitErrorsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ALimitErrorsEdit</name>
+ <state>100</state>
+ </option>
+ <option>
+ <name>AIgnoreStdInclude</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AStdIncludes</name>
+ <state>$TOOLKIT_DIR$\INC\</state>
+ </option>
+ <option>
+ <name>AUserIncludes</name>
+ <state>$PROJ_DIR$\..</state>
+ <state>$PROJ_DIR$\..\..\..\..</state>
+ </option>
+ <option>
+ <name>AExtraOptionsCheckV2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AExtraOptionsV2</name>
+ <state></state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>OBJCOPY</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OOCOutputFormat</name>
+ <version>1</version>
+ <state>2</state>
+ </option>
+ <option>
+ <name>OCOutputOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OOCOutputFile</name>
+ <state>usb_dev_gamepad.bin</state>
+ </option>
+ <option>
+ <name>OOCCommandLineProducer</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OOCObjCopyEnable</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>CUSTOM</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <extensions></extensions>
+ <cmdline></cmdline>
+ </data>
+ </settings>
+ <settings>
+ <name>BICOMP</name>
+ <archiveVersion>0</archiveVersion>
+ <data/>
+ </settings>
+ <settings>
+ <name>BUILDACTION</name>
+ <archiveVersion>1</archiveVersion>
+ <data>
+ <prebuild></prebuild>
+ <postbuild></postbuild>
+ </data>
+ </settings>
+ <settings>
+ <name>ILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>5</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>IlinkLibIOConfig</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>XLinkMisraHandler</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkInputFileSlave</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkOutputFile</name>
+ <state>usb_dev_gamepad.out</state>
+ </option>
+ <option>
+ <name>IlinkDebugInfoEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkKeepSymbols</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinaryFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinarySymbol</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinarySegment</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinaryAlign</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkDefines</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkConfigDefines</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkMapFile</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkLogFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogInitialization</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogModule</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogSection</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogVeneer</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkIcfOverride</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkIcfFile</name>
+ <state>$PROJ_DIR$\usb_dev_gamepad.icf</state>
+ </option>
+ <option>
+ <name>IlinkIcfFileSlave</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkSuppressDiags</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsRem</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsWarn</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsErr</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkWarningsAreErrors</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkUseExtraOptions</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkLowLevelInterfaceSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAutoLibEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAdditionalLibs</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkOverrideProgramEntryLabel</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabelSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabel</name>
+ <state>__iar_program_start</state>
+ </option>
+ <option>
+ <name>IlinkNXPLPCChecksum</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>DoFill</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FillerByte</name>
+ <state>0xFF</state>
+ </option>
+ <option>
+ <name>FillerStart</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>FillerEnd</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>CrcSize</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcAlign</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcAlgo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcPoly</name>
+ <state>0x11021</state>
+ </option>
+ <option>
+ <name>CrcCompl</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcBitOrder</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcInitialValue</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>DoCrc</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkBE8Slave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkBufferedTerminalOutput</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>IARCHIVE</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>IarchiveInputs</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IarchiveOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IarchiveOutput</name>
+ <state>###Unitialized###</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>BILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data/>
+ </settings>
+ </configuration>
+ <group>
+ <name>Libraries</name>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\driverlib\ewarm\Exe\driverlib.a</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\usblib\ewarm\Exe\usblib.a</name>
+ </file>
+ </group>
+ <group>
+ <name>Source</name>
+ <file>
+ <name>$PROJ_DIR$\..\drivers\buttons.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\startup_ewarm.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\utils\uartstdio.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\usb_dev_gamepad.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\usb_gamepad_structs.c</name>
+ </file>
+ </group>
+</project>
diff --git a/boards/ek-tm4c123gxl/usb_dev_gamepad/usb_dev_gamepad.icf b/boards/ek-tm4c123gxl/usb_dev_gamepad/usb_dev_gamepad.icf new file mode 100644 index 0000000..92355c7 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_gamepad/usb_dev_gamepad.icf @@ -0,0 +1,78 @@ +//*****************************************************************************
+//
+// usb_dev_gamepad.icf - Linker configuration file for usb_dev_gamepad.
+//
+// Copyright (c) 2013-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+//
+// Define a memory region that covers the entire 4 GB addressible space of the
+// processor.
+//
+define memory mem with size = 4G;
+
+//
+// Define a region for the on-chip flash.
+//
+define region FLASH = mem:[from 0x00000000 to 0x0003ffff];
+
+//
+// Define a region for the on-chip SRAM.
+//
+define region SRAM = mem:[from 0x20000000 to 0x20007fff];
+
+//
+// Define a block for the heap. The size should be set to something other
+// than zero if things in the C library that require the heap are used.
+//
+define block HEAP with alignment = 8, size = 0x00000000 { };
+
+//
+// Indicate that the read/write values should be initialized by copying from
+// flash.
+//
+initialize by copy { readwrite };
+
+//
+// Indicate that the noinit values should be left alone. This includes the
+// stack, which if initialized will destroy the return address from the
+// initialization code, causing the processor to branch to zero and fault.
+//
+do not initialize { section .noinit };
+
+//
+// Place the interrupt vectors at the start of flash.
+//
+place at start of FLASH { readonly section .intvec };
+
+//
+// Place the remainder of the read-only items into flash.
+//
+place in FLASH { readonly };
+
+//
+// Place the RAM vector table at the start of SRAM.
+//
+place at start of SRAM { section VTABLE };
+
+//
+// Place all read/write items into SRAM.
+//
+place in SRAM { readwrite, block HEAP };
diff --git a/boards/ek-tm4c123gxl/usb_dev_gamepad/usb_dev_gamepad.ld b/boards/ek-tm4c123gxl/usb_dev_gamepad/usb_dev_gamepad.ld new file mode 100644 index 0000000..e05806b --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_gamepad/usb_dev_gamepad.ld @@ -0,0 +1,57 @@ +/******************************************************************************
+ *
+ * usb_dev_gamepad.ld - Linker configuration file for usb_dev_gamepad.
+ *
+ * Copyright (c) 2013-2014 Texas Instruments Incorporated. All rights reserved.
+ * Software License Agreement
+ *
+ * Texas Instruments (TI) is supplying this software for use solely and
+ * exclusively on TI's microcontroller products. The software is owned by
+ * TI and/or its suppliers, and is protected under applicable copyright
+ * laws. You may not combine this software with "viral" open-source
+ * software in order to form a larger program.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+ * NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+ * NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+ * CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+ * DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ * This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+ *
+ *****************************************************************************/
+
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x00040000
+ SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000
+}
+
+SECTIONS
+{
+ .text :
+ {
+ _text = .;
+ KEEP(*(.isr_vector))
+ *(.text*)
+ *(.rodata*)
+ _etext = .;
+ } > FLASH
+
+ .data : AT(ADDR(.text) + SIZEOF(.text))
+ {
+ _data = .;
+ *(vtable)
+ *(.data*)
+ _edata = .;
+ } > SRAM
+
+ .bss :
+ {
+ _bss = .;
+ *(.bss*)
+ *(COMMON)
+ _ebss = .;
+ } > SRAM
+}
diff --git a/boards/ek-tm4c123gxl/usb_dev_gamepad/usb_dev_gamepad.sct b/boards/ek-tm4c123gxl/usb_dev_gamepad/usb_dev_gamepad.sct new file mode 100644 index 0000000..f296ccb --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_gamepad/usb_dev_gamepad.sct @@ -0,0 +1,47 @@ +;******************************************************************************
+;
+; usb_dev_gamepad.sct - Linker configuration file for usb_dev_gamepad.
+;
+; Copyright (c) 2013-2014 Texas Instruments Incorporated. All rights reserved.
+; Software License Agreement
+;
+; Texas Instruments (TI) is supplying this software for use solely and
+; exclusively on TI's microcontroller products. The software is owned by
+; TI and/or its suppliers, and is protected under applicable copyright
+; laws. You may not combine this software with "viral" open-source
+; software in order to form a larger program.
+;
+; THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+; NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+; NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+; A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+; CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+; DAMAGES, FOR ANY REASON WHATSOEVER.
+;
+; This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+;
+;******************************************************************************
+
+LR_IROM 0x00000000 0x00040000
+{
+ ;
+ ; Specify the Execution Address of the code and the size.
+ ;
+ ER_IROM 0x00000000 0x00040000
+ {
+ *.o (RESET, +First)
+ * (InRoot$$Sections, +RO)
+ }
+
+ ;
+ ; Specify the Execution Address of the data area.
+ ;
+ RW_IRAM 0x20000000 0x00008000
+ {
+ ;
+ ; Uncomment the following line in order to use IntRegister().
+ ;
+ ;* (vtable, +First)
+ * (+RW, +ZI)
+ }
+}
diff --git a/boards/ek-tm4c123gxl/usb_dev_gamepad/usb_dev_gamepad.uvopt b/boards/ek-tm4c123gxl/usb_dev_gamepad/usb_dev_gamepad.uvopt new file mode 100644 index 0000000..078db4e --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_gamepad/usb_dev_gamepad.uvopt @@ -0,0 +1,345 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+ <SchemaVersion>1.0</SchemaVersion>
+
+ <Header>### uVision Project, (C) Keil Software</Header>
+
+ <Extensions>
+ <cExt>*.c</cExt>
+ <aExt>*.s*; *.src; *.a*</aExt>
+ <oExt>*.obj</oExt>
+ <lExt>*.lib</lExt>
+ <tExt>*.txt; *.h; *.inc</tExt>
+ <pExt>*.plm</pExt>
+ <CppX>*.cpp</CppX>
+ </Extensions>
+
+ <DaveTm>
+ <dwLowDateTime>0</dwLowDateTime>
+ <dwHighDateTime>0</dwHighDateTime>
+ </DaveTm>
+
+ <Target>
+ <TargetName>usb_dev_gamepad</TargetName>
+ <ToolsetNumber>0x4</ToolsetNumber>
+ <ToolsetName>ARM-ADS</ToolsetName>
+ <TargetOption>
+ <CLKADS>8000000</CLKADS>
+ <OPTTT>
+ <gFlags>1</gFlags>
+ <BeepAtEnd>1</BeepAtEnd>
+ <RunSim>1</RunSim>
+ <RunTarget>0</RunTarget>
+ </OPTTT>
+ <OPTHX>
+ <HexSelection>1</HexSelection>
+ <FlashByte>65535</FlashByte>
+ <HexRangeLowAddress>0</HexRangeLowAddress>
+ <HexRangeHighAddress>0</HexRangeHighAddress>
+ <HexOffset>0</HexOffset>
+ </OPTHX>
+ <OPTLEX>
+ <PageWidth>79</PageWidth>
+ <PageLength>66</PageLength>
+ <TabStop>8</TabStop>
+ <ListingPath>.\rvmdk\</ListingPath>
+ </OPTLEX>
+ <ListingPage>
+ <CreateCListing>1</CreateCListing>
+ <CreateAListing>1</CreateAListing>
+ <CreateLListing>1</CreateLListing>
+ <CreateIListing>0</CreateIListing>
+ <AsmCond>1</AsmCond>
+ <AsmSymb>1</AsmSymb>
+ <AsmXref>0</AsmXref>
+ <CCond>1</CCond>
+ <CCode>0</CCode>
+ <CListInc>0</CListInc>
+ <CSymb>0</CSymb>
+ <LinkerCodeListing>0</LinkerCodeListing>
+ </ListingPage>
+ <OPTXL>
+ <LMap>1</LMap>
+ <LComments>1</LComments>
+ <LGenerateSymbols>1</LGenerateSymbols>
+ <LLibSym>1</LLibSym>
+ <LLines>1</LLines>
+ <LLocSym>1</LLocSym>
+ <LPubSym>1</LPubSym>
+ <LXref>0</LXref>
+ <LExpSel>0</LExpSel>
+ </OPTXL>
+ <OPTFL>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <IsCurrentTarget>1</IsCurrentTarget>
+ </OPTFL>
+ <CpuCode>255</CpuCode>
+ <Books>
+ <Book>
+ <Number>0</Number>
+ <Title>Data Sheet</Title>
+ <Path>DATASHTS\Luminary\TM4C123GH6PM.PDF</Path>
+ </Book>
+ </Books>
+ <DllOpt>
+ <SimDllName>SARMCM3.DLL</SimDllName>
+ <SimDllArguments>-MPU</SimDllArguments>
+ <SimDlgDllName>DCM.DLL</SimDlgDllName>
+ <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+ <TargetDllName>SARMCM3.DLL</TargetDllName>
+ <TargetDllArguments>-MPU</TargetDllArguments>
+ <TargetDlgDllName>TCM.DLL</TargetDlgDllName>
+ <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+ </DllOpt>
+ <DebugOpt>
+ <uSim>0</uSim>
+ <uTrg>1</uTrg>
+ <sLdApp>1</sLdApp>
+ <sGomain>1</sGomain>
+ <sRbreak>1</sRbreak>
+ <sRwatch>1</sRwatch>
+ <sRmem>1</sRmem>
+ <sRfunc>1</sRfunc>
+ <sRbox>1</sRbox>
+ <tLdApp>1</tLdApp>
+ <tGomain>0</tGomain>
+ <tRbreak>1</tRbreak>
+ <tRwatch>1</tRwatch>
+ <tRmem>1</tRmem>
+ <tRfunc>0</tRfunc>
+ <tRbox>1</tRbox>
+ <sRunDeb>0</sRunDeb>
+ <sLrtime>0</sLrtime>
+ <nTsel>4</nTsel>
+ <sDll></sDll>
+ <sDllPa></sDllPa>
+ <sDlgDll></sDlgDll>
+ <sDlgPa></sDlgPa>
+ <sIfile></sIfile>
+ <tDll></tDll>
+ <tDllPa></tDllPa>
+ <tDlgDll></tDlgDll>
+ <tDlgPa></tDlgPa>
+ <tIfile></tIfile>
+ <pMon>BIN\lmidk-agdi.dll</pMon>
+ </DebugOpt>
+ <TargetDriverDllRegistry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>lmidk-agdi</Key>
+ <Name>-O4614 -S3 -FO29</Name>
+ </SetRegEntry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>DLGTARM</Key>
+ <Name></Name>
+ </SetRegEntry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>ARMDBGFLAGS</Key>
+ <Name></Name>
+ </SetRegEntry>
+ </TargetDriverDllRegistry>
+ <DebugFlag>
+ <trace>0</trace>
+ <periodic>1</periodic>
+ <aLwin>0</aLwin>
+ <aCover>0</aCover>
+ <aSer1>0</aSer1>
+ <aSer2>0</aSer2>
+ <aPa>0</aPa>
+ <viewmode>1</viewmode>
+ <vrSel>0</vrSel>
+ <aSym>0</aSym>
+ <aTbox>0</aTbox>
+ <AscS1>0</AscS1>
+ <AscS2>0</AscS2>
+ <AscS3>0</AscS3>
+ <aSer3>0</aSer3>
+ <eProf>0</eProf>
+ <aLa>0</aLa>
+ <aPa1>0</aPa1>
+ <AscS4>0</AscS4>
+ <aSer4>0</aSer4>
+ <StkLoc>0</StkLoc>
+ <TrcWin>0</TrcWin>
+ <newCpu>0</newCpu>
+ <uProt>0</uProt>
+ </DebugFlag>
+ <LintExecutable></LintExecutable>
+ <LintConfigFile></LintConfigFile>
+ </TargetOption>
+ </Target>
+
+ <Group>
+ <GroupName>Source</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>1</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\drivers\buttons.c</PathWithFileName>
+ <FilenameWithoutPath>buttons.c</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>2</FileNumber>
+ <FileType>2</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\startup_rvmdk.S</PathWithFileName>
+ <FilenameWithoutPath>startup_rvmdk.S</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>3</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\utils\uartstdio.c</PathWithFileName>
+ <FilenameWithoutPath>uartstdio.c</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>4</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\usb_dev_gamepad.c</PathWithFileName>
+ <FilenameWithoutPath>usb_dev_gamepad.c</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>5</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\usb_gamepad_structs.c</PathWithFileName>
+ <FilenameWithoutPath>usb_gamepad_structs.c</FilenameWithoutPath>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>Libraries</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>6</FileNumber>
+ <FileType>4</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\driverlib\rvmdk\driverlib.lib</PathWithFileName>
+ <FilenameWithoutPath>driverlib.lib</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>7</FileNumber>
+ <FileType>4</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\usblib\rvmdk\usblib.lib</PathWithFileName>
+ <FilenameWithoutPath>usblib.lib</FilenameWithoutPath>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>Documentation</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>3</GroupNumber>
+ <FileNumber>8</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <Focus>1</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>1</TopLine>
+ <CurrentLine>1</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\readme.txt</PathWithFileName>
+ <FilenameWithoutPath>readme.txt</FilenameWithoutPath>
+ <WindowPosition>
+ <length>44</length>
+ <flags>0</flags>
+ <showCmd>1</showCmd>
+ <MinPosition>
+ <xPos>-1</xPos>
+ <yPos>-1</yPos>
+ </MinPosition>
+ <MaxPosition>
+ <xPos>-1</xPos>
+ <yPos>-1</yPos>
+ </MaxPosition>
+ <NormalPosition>
+ <Top>0</Top>
+ <Left>0</Left>
+ <Right>729</Right>
+ <Bottom>300</Bottom>
+ </NormalPosition>
+ </WindowPosition>
+ </File>
+ </Group>
+
+ <MDIGroups>
+ <Orientation>1</Orientation>
+ <ActiveMDIGroup>0</ActiveMDIGroup>
+ <MDIGroup>
+ <Size>100</Size>
+ <ActiveTab>0</ActiveTab>
+ <Documents>
+ <Doc>
+ <Name>.\readme.txt</Name>
+ <ColumnNumber>0</ColumnNumber>
+ <TopLine>1</TopLine>
+ <CurrentLine>1</CurrentLine>
+ </Doc>
+ </Documents>
+ </MDIGroup>
+ </MDIGroups>
+
+</ProjectOpt>
diff --git a/boards/ek-tm4c123gxl/usb_dev_gamepad/usb_dev_gamepad.uvproj b/boards/ek-tm4c123gxl/usb_dev_gamepad/usb_dev_gamepad.uvproj new file mode 100644 index 0000000..537d0bd --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_gamepad/usb_dev_gamepad.uvproj @@ -0,0 +1,444 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+ <SchemaVersion>1.1</SchemaVersion>
+
+ <Header>### uVision Project, (C) Keil Software</Header>
+
+ <Targets>
+ <Target>
+ <TargetName>usb_dev_gamepad</TargetName>
+ <ToolsetNumber>0x4</ToolsetNumber>
+ <ToolsetName>ARM-ADS</ToolsetName>
+ <TargetOption>
+ <TargetCommonOption>
+ <Device>TM4C123GH6PM</Device>
+ <Vendor>Texas Instruments</Vendor>
+ <Cpu>IRAM(0x20000000-0x20007FFF) IROM(0-0x3FFFF) CLOCK(8000000) CPUTYPE("Cortex-M4") FPU2</Cpu>
+ <FlashUtilSpec></FlashUtilSpec>
+ <StartupFile>"STARTUP\Luminary\Startup.s" ("Luminary Startup Code")</StartupFile>
+ <FlashDriverDll>UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0LM4F_256 -FS00 -FL040000)</FlashDriverDll>
+ <DeviceId>5919</DeviceId>
+ <RegisterFile>LM4Fxxxx.H</RegisterFile>
+ <MemoryEnv></MemoryEnv>
+ <Cmp></Cmp>
+ <Asm></Asm>
+ <Linker></Linker>
+ <OHString></OHString>
+ <InfinionOptionDll></InfinionOptionDll>
+ <SLE66CMisc></SLE66CMisc>
+ <SLE66AMisc></SLE66AMisc>
+ <SLE66LinkerMisc></SLE66LinkerMisc>
+ <UseEnv>0</UseEnv>
+ <BinPath></BinPath>
+ <IncludePath></IncludePath>
+ <LibPath></LibPath>
+ <RegisterFilePath>Luminary\</RegisterFilePath>
+ <DBRegisterFilePath>Luminary\</DBRegisterFilePath>
+ <TargetStatus>
+ <Error>0</Error>
+ <ExitCodeStop>0</ExitCodeStop>
+ <ButtonStop>0</ButtonStop>
+ <NotGenerated>0</NotGenerated>
+ <InvalidFlash>1</InvalidFlash>
+ </TargetStatus>
+ <OutputDirectory>.\rvmdk\</OutputDirectory>
+ <OutputName>usb_dev_gamepad</OutputName>
+ <CreateExecutable>1</CreateExecutable>
+ <CreateLib>0</CreateLib>
+ <CreateHexFile>0</CreateHexFile>
+ <DebugInformation>1</DebugInformation>
+ <BrowseInformation>1</BrowseInformation>
+ <ListingPath>.\rvmdk\</ListingPath>
+ <HexFormatSelection>1</HexFormatSelection>
+ <Merge32K>0</Merge32K>
+ <CreateBatchFile>0</CreateBatchFile>
+ <BeforeCompile>
+ <RunUserProg1>0</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name></UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </BeforeCompile>
+ <BeforeMake>
+ <RunUserProg1>0</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name></UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </BeforeMake>
+ <AfterMake>
+ <RunUserProg1>1</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name>fromelf --bin --output .\rvmdk\usb_dev_gamepad.bin .\rvmdk\usb_dev_gamepad.axf</UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </AfterMake>
+ <SelectedForBatchBuild>0</SelectedForBatchBuild>
+ <SVCSIdString></SVCSIdString>
+ </TargetCommonOption>
+ <CommonProperty>
+ <UseCPPCompiler>0</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <DllOption>
+ <SimDllName>SARMCM3.DLL</SimDllName>
+ <SimDllArguments>-MPU</SimDllArguments>
+ <SimDlgDll>DCM.DLL</SimDlgDll>
+ <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+ <TargetDllName>SARMCM3.DLL</TargetDllName>
+ <TargetDllArguments>-MPU</TargetDllArguments>
+ <TargetDlgDll>TCM.DLL</TargetDlgDll>
+ <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+ </DllOption>
+ <DebugOption>
+ <OPTHX>
+ <HexSelection>1</HexSelection>
+ <HexRangeLowAddress>0</HexRangeLowAddress>
+ <HexRangeHighAddress>0</HexRangeHighAddress>
+ <HexOffset>0</HexOffset>
+ <Oh166RecLen>16</Oh166RecLen>
+ </OPTHX>
+ <Simulator>
+ <UseSimulator>0</UseSimulator>
+ <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+ <RunToMain>1</RunToMain>
+ <RestoreBreakpoints>1</RestoreBreakpoints>
+ <RestoreWatchpoints>1</RestoreWatchpoints>
+ <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+ <RestoreFunctions>1</RestoreFunctions>
+ <RestoreToolbox>1</RestoreToolbox>
+ <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+ </Simulator>
+ <Target>
+ <UseTarget>1</UseTarget>
+ <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+ <RunToMain>0</RunToMain>
+ <RestoreBreakpoints>1</RestoreBreakpoints>
+ <RestoreWatchpoints>1</RestoreWatchpoints>
+ <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+ <RestoreFunctions>0</RestoreFunctions>
+ <RestoreToolbox>1</RestoreToolbox>
+ </Target>
+ <RunDebugAfterBuild>0</RunDebugAfterBuild>
+ <TargetSelection>4</TargetSelection>
+ <SimDlls>
+ <CpuDll></CpuDll>
+ <CpuDllArguments></CpuDllArguments>
+ <PeripheralDll></PeripheralDll>
+ <PeripheralDllArguments></PeripheralDllArguments>
+ <InitializationFile></InitializationFile>
+ </SimDlls>
+ <TargetDlls>
+ <CpuDll></CpuDll>
+ <CpuDllArguments></CpuDllArguments>
+ <PeripheralDll></PeripheralDll>
+ <PeripheralDllArguments></PeripheralDllArguments>
+ <InitializationFile></InitializationFile>
+ <Driver>BIN\lmidk-agdi.dll</Driver>
+ </TargetDlls>
+ </DebugOption>
+ <Utilities>
+ <Flash1>
+ <UseTargetDll>1</UseTargetDll>
+ <UseExternalTool>0</UseExternalTool>
+ <RunIndependent>0</RunIndependent>
+ <UpdateFlashBeforeDebugging>0</UpdateFlashBeforeDebugging>
+ <Capability>1</Capability>
+ <DriverSelection>4099</DriverSelection>
+ </Flash1>
+ <Flash2>BIN\lmidk-agdi.dll</Flash2>
+ <Flash3></Flash3>
+ <Flash4></Flash4>
+ </Utilities>
+ <TargetArmAds>
+ <ArmAdsMisc>
+ <GenerateListings>0</GenerateListings>
+ <asHll>1</asHll>
+ <asAsm>1</asAsm>
+ <asMacX>1</asMacX>
+ <asSyms>1</asSyms>
+ <asFals>1</asFals>
+ <asDbgD>1</asDbgD>
+ <asForm>1</asForm>
+ <ldLst>0</ldLst>
+ <ldmm>1</ldmm>
+ <ldXref>1</ldXref>
+ <BigEnd>0</BigEnd>
+ <AdsALst>0</AdsALst>
+ <AdsACrf>0</AdsACrf>
+ <AdsANop>0</AdsANop>
+ <AdsANot>0</AdsANot>
+ <AdsLLst>1</AdsLLst>
+ <AdsLmap>1</AdsLmap>
+ <AdsLcgr>1</AdsLcgr>
+ <AdsLsym>1</AdsLsym>
+ <AdsLszi>1</AdsLszi>
+ <AdsLtoi>1</AdsLtoi>
+ <AdsLsun>1</AdsLsun>
+ <AdsLven>1</AdsLven>
+ <AdsLsxf>1</AdsLsxf>
+ <RvctClst>0</RvctClst>
+ <GenPPlst>0</GenPPlst>
+ <AdsCpuType>"Cortex-M4"</AdsCpuType>
+ <RvctDeviceName></RvctDeviceName>
+ <mOS>0</mOS>
+ <uocRom>0</uocRom>
+ <uocRam>0</uocRam>
+ <hadIROM>1</hadIROM>
+ <hadIRAM>1</hadIRAM>
+ <hadXRAM>0</hadXRAM>
+ <uocXRam>0</uocXRam>
+ <RvdsVP>2</RvdsVP>
+ <hadIRAM2>0</hadIRAM2>
+ <hadIROM2>0</hadIROM2>
+ <StupSel>8</StupSel>
+ <useUlib>1</useUlib>
+ <EndSel>0</EndSel>
+ <uLtcg>0</uLtcg>
+ <RoSelD>3</RoSelD>
+ <RwSelD>3</RwSelD>
+ <CodeSel>0</CodeSel>
+ <OptFeed>0</OptFeed>
+ <NoZi1>0</NoZi1>
+ <NoZi2>0</NoZi2>
+ <NoZi3>0</NoZi3>
+ <NoZi4>0</NoZi4>
+ <NoZi5>0</NoZi5>
+ <Ro1Chk>0</Ro1Chk>
+ <Ro2Chk>0</Ro2Chk>
+ <Ro3Chk>0</Ro3Chk>
+ <Ir1Chk>1</Ir1Chk>
+ <Ir2Chk>0</Ir2Chk>
+ <Ra1Chk>0</Ra1Chk>
+ <Ra2Chk>0</Ra2Chk>
+ <Ra3Chk>0</Ra3Chk>
+ <Im1Chk>1</Im1Chk>
+ <Im2Chk>0</Im2Chk>
+ <OnChipMemories>
+ <Ocm1>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm1>
+ <Ocm2>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm2>
+ <Ocm3>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm3>
+ <Ocm4>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm4>
+ <Ocm5>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm5>
+ <Ocm6>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm6>
+ <IRAM>
+ <Type>0</Type>
+ <StartAddress>0x20000000</StartAddress>
+ <Size>0x8000</Size>
+ </IRAM>
+ <IROM>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x40000</Size>
+ </IROM>
+ <XRAM>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </XRAM>
+ <OCR_RVCT1>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT1>
+ <OCR_RVCT2>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT2>
+ <OCR_RVCT3>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT3>
+ <OCR_RVCT4>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x40000</Size>
+ </OCR_RVCT4>
+ <OCR_RVCT5>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT5>
+ <OCR_RVCT6>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT6>
+ <OCR_RVCT7>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT7>
+ <OCR_RVCT8>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT8>
+ <OCR_RVCT9>
+ <Type>0</Type>
+ <StartAddress>0x20000000</StartAddress>
+ <Size>0x8000</Size>
+ </OCR_RVCT9>
+ <OCR_RVCT10>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT10>
+ </OnChipMemories>
+ <RvctStartVector></RvctStartVector>
+ </ArmAdsMisc>
+ <Cads>
+ <interw>0</interw>
+ <Optim>3</Optim>
+ <oTime>0</oTime>
+ <SplitLS>0</SplitLS>
+ <OneElfS>1</OneElfS>
+ <Strict>0</Strict>
+ <EnumInt>0</EnumInt>
+ <PlainCh>0</PlainCh>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <wLevel>2</wLevel>
+ <uThumb>0</uThumb>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define>rvmdk PART_TM4C123GH6PM TARGET_IS_TM4C123_RA1 UART_BUFFERED</Define>
+ <Undefine></Undefine>
+ <IncludePath>..;..\..\..\..;</IncludePath>
+ </VariousControls>
+ </Cads>
+ <Aads>
+ <interw>1</interw>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <thumb>0</thumb>
+ <SplitLS>0</SplitLS>
+ <SwStkChk>0</SwStkChk>
+ <NoWarn>0</NoWarn>
+ <VariousControls>
+ <MiscControls></MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Aads>
+ <LDads>
+ <umfTarg>0</umfTarg>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <noStLib>0</noStLib>
+ <RepFail>1</RepFail>
+ <useFile>0</useFile>
+ <TextAddressRange>0x00000000</TextAddressRange>
+ <DataAddressRange>0x20000000</DataAddressRange>
+ <ScatterFile>usb_dev_gamepad.sct</ScatterFile>
+ <IncludeLibs></IncludeLibs>
+ <IncludeLibsPath></IncludeLibsPath>
+ <Misc>--entry Reset_Handler</Misc>
+ <LinkerInputFile></LinkerInputFile>
+ <DisabledWarnings></DisabledWarnings>
+ </LDads>
+ </TargetArmAds>
+ </TargetOption>
+ <Groups>
+ <Group>
+ <GroupName>Source</GroupName>
+ <Files>
+ <File>
+ <FileName>buttons.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>..\drivers\buttons.c</FilePath>
+ </File>
+ <File>
+ <FileName>startup_rvmdk.S</FileName>
+ <FileType>2</FileType>
+ <FilePath>.\startup_rvmdk.S</FilePath>
+ </File>
+ <File>
+ <FileName>uartstdio.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>..\..\..\..\utils\uartstdio.c</FilePath>
+ </File>
+ <File>
+ <FileName>usb_dev_gamepad.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>.\usb_dev_gamepad.c</FilePath>
+ </File>
+ <File>
+ <FileName>usb_gamepad_structs.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>.\usb_gamepad_structs.c</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>Libraries</GroupName>
+ <Files>
+ <File>
+ <FileName>driverlib.lib</FileName>
+ <FileType>4</FileType>
+ <FilePath>..\..\..\..\driverlib\rvmdk\driverlib.lib</FilePath>
+ </File>
+ <File>
+ <FileName>usblib.lib</FileName>
+ <FileType>4</FileType>
+ <FilePath>..\..\..\..\usblib\rvmdk\usblib.lib</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>Documentation</GroupName>
+ <Files>
+ <File>
+ <FileName>readme.txt</FileName>
+ <FileType>5</FileType>
+ <FilePath>.\readme.txt</FilePath>
+ </File>
+ </Files>
+ </Group>
+ </Groups>
+ </Target>
+ </Targets>
+
+</Project>
diff --git a/boards/ek-tm4c123gxl/usb_dev_gamepad/usb_dev_gamepad_ccs.cmd b/boards/ek-tm4c123gxl/usb_dev_gamepad/usb_dev_gamepad_ccs.cmd new file mode 100644 index 0000000..25d1a9d --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_gamepad/usb_dev_gamepad_ccs.cmd @@ -0,0 +1,70 @@ +/******************************************************************************
+ *
+ * usb_dev_gamepad_ccs.cmd - CCS linker configuration file for usb_dev_gamepad.
+ *
+ * Copyright (c) 2013-2014 Texas Instruments Incorporated. All rights reserved.
+ * Software License Agreement
+ *
+ * Texas Instruments (TI) is supplying this software for use solely and
+ * exclusively on TI's microcontroller products. The software is owned by
+ * TI and/or its suppliers, and is protected under applicable copyright
+ * laws. You may not combine this software with "viral" open-source
+ * software in order to form a larger program.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+ * NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+ * NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+ * CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+ * DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ * This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+ *
+ *****************************************************************************/
+
+--retain=g_pfnVectors
+
+/* The following command line options are set as part of the CCS project. */
+/* If you are building using the command line, or for some reason want to */
+/* define them here, you can uncomment and modify these lines as needed. */
+/* If you are using CCS for building, it is probably better to make any such */
+/* modifications in your CCS project and leave this file alone. */
+/* */
+/* --heap_size=0 */
+/* --stack_size=256 */
+/* --library=rtsv7M3_T_le_eabi.lib */
+
+/* The starting address of the application. Normally the interrupt vectors */
+/* must be located at the beginning of the application. */
+#define APP_BASE 0x00000000
+#define RAM_BASE 0x20000000
+
+/* System memory map */
+
+MEMORY
+{
+ /* Application stored in and executes from internal flash */
+ FLASH (RX) : origin = APP_BASE, length = 0x00040000
+ /* Application uses internal RAM for data */
+ SRAM (RWX) : origin = 0x20000000, length = 0x00008000
+}
+
+/* Section allocation in memory */
+
+SECTIONS
+{
+ .intvecs: > APP_BASE
+ .text : > FLASH
+ .const : > FLASH
+ .cinit : > FLASH
+ .pinit : > FLASH
+ .init_array : > FLASH
+
+ .vtable : > RAM_BASE
+ .data : > SRAM
+ .bss : > SRAM
+ .sysmem : > SRAM
+ .stack : > SRAM
+}
+
+__STACK_TOP = __stack + 1024;
diff --git a/boards/ek-tm4c123gxl/usb_dev_gamepad/usb_gamepad_structs.c b/boards/ek-tm4c123gxl/usb_dev_gamepad/usb_gamepad_structs.c new file mode 100644 index 0000000..69eaa95 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_gamepad/usb_gamepad_structs.c @@ -0,0 +1,151 @@ +//*****************************************************************************
+//
+// usb_gamepad_structs.c - Data structures defining the USB gamepad device.
+//
+// Copyright (c) 2013-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "inc/hw_types.h"
+#include "usblib/usblib.h"
+#include "usblib/usbhid.h"
+#include "usblib/usb-ids.h"
+#include "usblib/device/usbdevice.h"
+#include "usblib/device/usbdcomp.h"
+#include "usblib/device/usbdhid.h"
+#include "usblib/device/usbdhidgamepad.h"
+#include "usb_gamepad_structs.h"
+
+//****************************************************************************
+//
+// The languages supported by this device.
+//
+//****************************************************************************
+const uint8_t g_pui8LangDescriptor[] =
+{
+ 4,
+ USB_DTYPE_STRING,
+ USBShort(USB_LANG_EN_US)
+};
+
+//****************************************************************************
+//
+// The manufacturer string.
+//
+//****************************************************************************
+const uint8_t g_pui8ManufacturerString[] =
+{
+ (17 + 1) * 2,
+ USB_DTYPE_STRING,
+ 'T', 0, 'e', 0, 'x', 0, 'a', 0, 's', 0, ' ', 0, 'I', 0, 'n', 0, 's', 0,
+ 't', 0, 'r', 0, 'u', 0, 'm', 0, 'e', 0, 'n', 0, 't', 0, 's', 0,
+};
+
+//****************************************************************************
+//
+// The product string.
+//
+//****************************************************************************
+const uint8_t g_pui8ProductString[] =
+{
+ (17 + 1) * 2,
+ USB_DTYPE_STRING,
+ 'E', 0, 'x', 0, 'a', 0, 'm', 0, 'p', 0, 'l', 0, 'e', 0, ' ', 0,
+ 'G', 0, 'a', 0, 'm', 0, 'e', 0, ' ', 0, 'P', 0, 'a', 0, 'd', 0, ' ', 0,
+};
+
+//****************************************************************************
+//
+// The serial number string.
+//
+//****************************************************************************
+const uint8_t g_pui8SerialNumberString[] =
+{
+ (8 + 1) * 2,
+ USB_DTYPE_STRING,
+ '1', 0, '2', 0, '3', 0, '4', 0, '5', 0, '6', 0, '7', 0, '8', 0
+};
+
+//*****************************************************************************
+//
+// The interface description string.
+//
+//*****************************************************************************
+const uint8_t g_pui8HIDInterfaceString[] =
+{
+ (21 + 1) * 2,
+ USB_DTYPE_STRING,
+ 'H', 0, 'I', 0, 'D', 0, ' ', 0, 'G', 0, 'a', 0, 'm', 0, 'e', 0,
+ 'p', 0, 'a', 0, 'd', 0, ' ', 0, 'I', 0, 'n', 0, 't', 0, 'e', 0,
+ 'r', 0, 'f', 0, 'a', 0, 'c', 0, 'e', 0
+};
+
+//*****************************************************************************
+//
+// The configuration description string.
+//
+//*****************************************************************************
+const uint8_t g_pui8ConfigString[] =
+{
+ (25 + 1) * 2,
+ USB_DTYPE_STRING,
+ 'H', 0, 'I', 0, 'D', 0, ' ', 0, 'G', 0, 'a', 0, 'm', 0, 'e', 0,
+ 'p', 0, 'a', 0, 'd', 0, ' ', 0, 'C', 0, 'o', 0, 'n', 0, 'f', 0,
+ 'i', 0, 'g', 0, 'u', 0, 'r', 0, 'a', 0, 't', 0, 'i', 0, 'o', 0,
+ 'n', 0
+};
+
+//*****************************************************************************
+//
+// The descriptor string table.
+//
+//*****************************************************************************
+const uint8_t * const g_ppui8StringDescriptors[] =
+{
+ g_pui8LangDescriptor,
+ g_pui8ManufacturerString,
+ g_pui8ProductString,
+ g_pui8SerialNumberString,
+ g_pui8HIDInterfaceString,
+ g_pui8ConfigString
+};
+
+#define NUM_STRING_DESCRIPTORS (sizeof(g_ppui8StringDescriptors) / \
+ sizeof(uint8_t *))
+
+//*****************************************************************************
+//
+// The HID game pad device initialization and customization structures.
+//
+//*****************************************************************************
+tUSBDHIDGamepadDevice g_sGamepadDevice =
+{
+ USB_VID_TI_1CBE,
+ USB_PID_GAMEPAD,
+ 0,
+ USB_CONF_ATTR_SELF_PWR,
+ GamepadHandler,
+ (void *)&g_sGamepadDevice,
+ g_ppui8StringDescriptors,
+ NUM_STRING_DESCRIPTORS,
+ 0,
+ 0
+};
diff --git a/boards/ek-tm4c123gxl/usb_dev_gamepad/usb_gamepad_structs.h b/boards/ek-tm4c123gxl/usb_dev_gamepad/usb_gamepad_structs.h new file mode 100644 index 0000000..a45eb92 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_gamepad/usb_gamepad_structs.h @@ -0,0 +1,33 @@ +//*****************************************************************************
+//
+// usb_gamepad_structs.h - Data structures defining the gamepad USB device.
+//
+// Copyright (c) 2013-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#ifndef _USB_GAMEPAD_STRUCTS_H_
+#define _USB_GAMEPAD_STRUCTS_H_
+
+extern uint32_t GamepadHandler(void *pvCBData, uint32_t ui32Event,
+ uint32_t ui32MsgData, void *pvMsgData);
+
+extern tUSBDHIDGamepadDevice g_sGamepadDevice;
+
+#endif
diff --git a/boards/ek-tm4c123gxl/usb_dev_serial/Makefile b/boards/ek-tm4c123gxl/usb_dev_serial/Makefile new file mode 100644 index 0000000..dc53270 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_serial/Makefile @@ -0,0 +1,90 @@ +#******************************************************************************
+#
+# Makefile - Rules for building the USB device serial example.
+#
+# Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+# Software License Agreement
+#
+# Texas Instruments (TI) is supplying this software for use solely and
+# exclusively on TI's microcontroller products. The software is owned by
+# TI and/or its suppliers, and is protected under applicable copyright
+# laws. You may not combine this software with "viral" open-source
+# software in order to form a larger program.
+#
+# THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+# NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+# NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+# CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+# DAMAGES, FOR ANY REASON WHATSOEVER.
+#
+# This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+#
+#******************************************************************************
+
+#
+# Defines the part type that this project uses.
+#
+PART=TM4C123GH6PM
+
+#
+# The base directory for TivaWare.
+#
+ROOT=../../../..
+
+#
+# Include the common make definitions.
+#
+include ${ROOT}/makedefs
+
+#
+# Where to find source files that do not live in this directory.
+#
+VPATH=../drivers
+VPATH+=../../../../utils
+
+#
+# Where to find header files that do not live in the source directory.
+#
+IPATH=..
+IPATH+=../../../..
+
+#
+# The default rule, which causes the USB device serial example to be built.
+#
+all: ${COMPILER}
+all: ${COMPILER}/usb_dev_serial.axf
+
+#
+# The rule to clean out all the build products.
+#
+clean:
+ @rm -rf ${COMPILER} ${wildcard *~}
+
+#
+# The rule to create the target directory.
+#
+${COMPILER}:
+ @mkdir -p ${COMPILER}
+
+#
+# Rules for building the USB device serial example.
+#
+${COMPILER}/usb_dev_serial.axf: ${COMPILER}/startup_${COMPILER}.o
+${COMPILER}/usb_dev_serial.axf: ${COMPILER}/uartstdio.o
+${COMPILER}/usb_dev_serial.axf: ${COMPILER}/usb_dev_serial.o
+${COMPILER}/usb_dev_serial.axf: ${COMPILER}/usb_serial_structs.o
+${COMPILER}/usb_dev_serial.axf: ${COMPILER}/ustdlib.o
+${COMPILER}/usb_dev_serial.axf: ${ROOT}/usblib/${COMPILER}/libusb.a
+${COMPILER}/usb_dev_serial.axf: ${ROOT}/driverlib/${COMPILER}/libdriver.a
+${COMPILER}/usb_dev_serial.axf: usb_dev_serial.ld
+SCATTERgcc_usb_dev_serial=usb_dev_serial.ld
+ENTRY_usb_dev_serial=ResetISR
+CFLAGSgcc=-DTARGET_IS_TM4C123_RB1 -DUART_BUFFERED
+
+#
+# Include the automatically generated dependency files.
+#
+ifneq (${MAKECMDGOALS},clean)
+-include ${wildcard ${COMPILER}/*.d} __dummy__
+endif
diff --git a/boards/ek-tm4c123gxl/usb_dev_serial/ccs/.ccsimportspec b/boards/ek-tm4c123gxl/usb_dev_serial/ccs/.ccsimportspec new file mode 100644 index 0000000..c5ecbbf --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_serial/ccs/.ccsimportspec @@ -0,0 +1,10 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<importSpec>
+ <source root="..">
+ <file name="usb_dev_serial.c"/>
+ <file name="usb_serial_structs.c"/>
+ <file name="usb_serial_structs.h"/>
+ <file regex=".*_ccs\.cmd"/>
+ <file name="startup_ccs.c"/>
+ </source>
+</importSpec>
diff --git a/boards/ek-tm4c123gxl/usb_dev_serial/ccs/.ccsproject b/boards/ek-tm4c123gxl/usb_dev_serial/ccs/.ccsproject new file mode 100644 index 0000000..75fb50e --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_serial/ccs/.ccsproject @@ -0,0 +1,10 @@ +<?xml version="1.0" encoding="UTF-8" ?>
+<?ccsproject version="1.0"?>
+<projectOptions>
+ <deviceVariant value="Cortex M.TM4C123GH6PM"/>
+ <deviceFamily value="TMS470"/>
+ <deviceEndianness value="little"/>
+ <codegenToolVersion value="5.0.4"/>
+ <isElfFormat value="true"/>
+ <rts value="libc.a"/>
+</projectOptions>
diff --git a/boards/ek-tm4c123gxl/usb_dev_serial/ccs/.cproject b/boards/ek-tm4c123gxl/usb_dev_serial/ccs/.cproject new file mode 100644 index 0000000..bd5243c --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_serial/ccs/.cproject @@ -0,0 +1,193 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+ <storageModule configRelations="2" moduleId="org.eclipse.cdt.core.settings">
+ <cconfiguration id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.855281563">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.855281563" moduleId="org.eclipse.cdt.core.settings" name="Debug">
+ <macros>
+ <stringMacro name="SW_ROOT" type="VALUE_PATH_DIR" value="${PROJECT_ROOT}/../../../../.."/>
+ </macros>
+ <externalSettings/>
+ <extensions>
+ <extension id="com.ti.ccstudio.binaryparser.CoffParser" point="org.eclipse.cdt.core.BinaryParser"/>
+ <extension id="com.ti.ccstudio.errorparser.CoffErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.LinkErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.AsmErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactExtension="out" artifactName="${ProjName}" buildProperties="" cleanCommand="${CG_CLEAN_CMD}" description="" id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.855281563" name="Debug" parent="com.ti.ccstudio.buildDefinitions.TMS470.Debug" postbuildStep=""${CCE_INSTALL_ROOT}/utils/tiobj2bin/tiobj2bin" "${BuildArtifactFileName}" "${BuildArtifactFileBaseName}.bin" "${CG_TOOL_ROOT}/bin/armofd" "${CG_TOOL_ROOT}/bin/armhex" "${CCE_INSTALL_ROOT}/utils/tiobj2bin/mkhex4bin"">
+ <folderInfo id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.855281563." name="/" resourcePath="">
+ <toolChain id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.DebugToolchain.1750130302" name="TI Build Tools" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.DebugToolchain" targetTool="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug.510029367">
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS.1772705808" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS" valueType="stringList">
+ <listOptionValue builtIn="false" value="DEVICE_CONFIGURATION_ID=Cortex M.TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="DEVICE_ENDIANNESS=little"/>
+ <listOptionValue builtIn="false" value="OUTPUT_FORMAT=ELF"/>
+ <listOptionValue builtIn="false" value="CCS_MBS_VERSION=5.1.0.01"/>
+ <listOptionValue builtIn="false" value="RUNTIME_SUPPORT_LIBRARY=libc.a"/>
+ <listOptionValue builtIn="false" value="OUTPUT_TYPE=executable"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION.569667104" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION" value="5.0.4" valueType="string"/>
+ <targetPlatform id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformDebug.2021743753" name="Platform" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformDebug"/>
+ <builder buildPath="${BuildDirectory}" id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderDebug.1533590887" name="GNU Make.Debug" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderDebug"/>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerDebug.1150437648" name="ARM Compiler" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerDebug">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.1923611503" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.7M4" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.1020600920" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.1302899867" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.eabi" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.1895641397" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.FPv4SPD16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL.2102800385" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEBUGGING_MODEL.SYMDEBUG__DWARF" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING.779088658" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING" valueType="stringList">
+ <listOptionValue builtIn="false" value="225"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER.1091188145" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.359744624" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH.903122894" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH" valueType="includePath">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/examples/boards/ek-tm4c123gxl""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN.1097482195" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.511954914" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.on" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL.1633265647" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.OPT_LEVEL.2" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC.2075465641" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL.1755858656" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE.247243839" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE" valueType="definedSymbols">
+ <listOptionValue builtIn="false" value="ccs="ccs""/>
+ <listOptionValue builtIn="false" value="PART_TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="TARGET_IS_TM4C123_RB1"/>
+ <listOptionValue builtIn="false" value="UART_BUFFERED"/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS.1329877990" name="C Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS.1129434485" name="C++ Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS.535251445" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS.243146284" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS"/>
+ </tool>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug.510029367" name="ARM Linker" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerDebug">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE.202629043" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE" value=""usb_dev_serial_ccs.map"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE.1056450876" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE" value="1024" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE.47777829" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE" value="0" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE.1062241001" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE" value=""${ProjName}.out"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO.906299376" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO" value=""${ProjName}_linkInfo.xml"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER.1777081758" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.2082523863" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH.94199939" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH" valueType="libPaths">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/lib""/>
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY.1223161981" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY" valueType="libs">
+ <listOptionValue builtIn="false" value=""libc.a""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/driverlib/ccs/Debug/driverlib.lib""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/usblib/ccs/Debug/usblib.lib""/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS.509083550" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS.740197482" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS.1784754727" name="Generated Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS"/>
+ </tool>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ <cconfiguration id="com.ti.ccstudio.buildDefinitions.TMS470.Release.937053308">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.ti.ccstudio.buildDefinitions.TMS470.Release.937053308" moduleId="org.eclipse.cdt.core.settings" name="Release">
+ <macros>
+ <stringMacro name="SW_ROOT" type="VALUE_PATH_DIR" value="${PROJECT_ROOT}/../../../../.."/>
+ </macros>
+ <externalSettings/>
+ <extensions>
+ <extension id="com.ti.ccstudio.binaryparser.CoffParser" point="org.eclipse.cdt.core.BinaryParser"/>
+ <extension id="com.ti.ccstudio.errorparser.CoffErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.LinkErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="com.ti.ccstudio.errorparser.AsmErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactExtension="out" artifactName="${ProjName}" buildProperties="" cleanCommand="${CG_CLEAN_CMD}" description="" id="com.ti.ccstudio.buildDefinitions.TMS470.Release.937053308" name="Release" parent="com.ti.ccstudio.buildDefinitions.TMS470.Release" postbuildStep=""${CCE_INSTALL_ROOT}/utils/tiobj2bin/tiobj2bin" "${BuildArtifactFileName}" "${BuildArtifactFileBaseName}.bin" "${CG_TOOL_ROOT}/bin/armofd" "${CG_TOOL_ROOT}/bin/armhex" "${CCE_INSTALL_ROOT}/utils/tiobj2bin/mkhex4bin"">
+ <folderInfo id="com.ti.ccstudio.buildDefinitions.TMS470.Release.937053308." name="/" resourcePath="">
+ <toolChain id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.ReleaseToolchain.304103929" name="TI Build Tools" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.ReleaseToolchain" targetTool="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease.1736187784">
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS.179413164" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS" valueType="stringList">
+ <listOptionValue builtIn="false" value="DEVICE_CONFIGURATION_ID=Cortex M.TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="DEVICE_ENDIANNESS=little"/>
+ <listOptionValue builtIn="false" value="OUTPUT_FORMAT=ELF"/>
+ <listOptionValue builtIn="false" value="CCS_MBS_VERSION=5.1.0.01"/>
+ <listOptionValue builtIn="false" value="RUNTIME_SUPPORT_LIBRARY=libc.a"/>
+ <listOptionValue builtIn="false" value="OUTPUT_TYPE=executable"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION.973109148" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION" value="5.0.4" valueType="string"/>
+ <targetPlatform id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformRelease.854095715" name="Platform" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.targetPlatformRelease"/>
+ <builder buildPath="${BuildDirectory}" id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderRelease.354721469" name="GNU Make.Release" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.builderRelease"/>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerRelease.1797598631" name="ARM Compiler" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.compilerRelease">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.2093187692" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.SILICON_VERSION.7M4" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.1447245135" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.CODE_STATE.16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.198892110" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.ABI.eabi" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.2074952136" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.FLOAT_SUPPORT.FPv4SPD16" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING.700730053" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WARNING" valueType="stringList">
+ <listOptionValue builtIn="false" value="225"/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER.424504565" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.660167102" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH.230945475" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.INCLUDE_PATH" valueType="includePath">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/examples/boards/ek-tm4c123gxl""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN.1972140521" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.LITTLE_ENDIAN" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.842332931" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GEN_FUNC_SUBSECTIONS.on" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC.1695697918" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.GCC" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL.961974196" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.UAL" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE.728918821" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compilerID.DEFINE" valueType="definedSymbols">
+ <listOptionValue builtIn="false" value="ccs="ccs""/>
+ <listOptionValue builtIn="false" value="PART_TM4C123GH6PM"/>
+ <listOptionValue builtIn="false" value="TARGET_IS_TM4C123_RB1"/>
+ <listOptionValue builtIn="false" value="UART_BUFFERED"/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS.978278103" name="C Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__C_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS.1302556718" name="C++ Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__CPP_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS.13023727" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS.1494771811" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.compiler.inputType__ASM2_SRCS"/>
+ </tool>
+ <tool id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease.1736187784" name="ARM Linker" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exe.linkerRelease">
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE.1784675872" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.MAP_FILE" value=""usb_dev_serial_ccs.map"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE.741838345" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.STACK_SIZE" value="1024" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE.1620137358" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.HEAP_SIZE" value="0" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE.415178314" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.OUTPUT_FILE" value=""${ProjName}.out"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO.33335814" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.XML_LINK_INFO" value=""${ProjName}_linkInfo.xml"" valueType="string"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER.1360889821" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.240145034" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.DIAG_WRAP.off" valueType="enumerated"/>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH.1337806200" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.SEARCH_PATH" valueType="libPaths">
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/lib""/>
+ <listOptionValue builtIn="false" value=""${CG_TOOL_ROOT}/include""/>
+ </option>
+ <option id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY.246253557" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.linkerID.LIBRARY" valueType="libs">
+ <listOptionValue builtIn="false" value=""libc.a""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/driverlib/ccs/Debug/driverlib.lib""/>
+ <listOptionValue builtIn="false" value=""${SW_ROOT}/usblib/ccs/Debug/usblib.lib""/>
+ </option>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS.1699914507" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS.1824619225" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__CMD2_SRCS"/>
+ <inputType id="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS.2094559089" name="Generated Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_5.0.exeLinker.inputType__GEN_CMDS"/>
+ </tool>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <project id="usb_dev_serial.com.ti.ccstudio.buildDefinitions.TMS470.ProjectType.1859232960" name="ARM" projectType="com.ti.ccstudio.buildDefinitions.TMS470.ProjectType"/>
+ </storageModule>
+ <storageModule moduleId="scannerConfiguration"/>
+ <storageModule moduleId="org.eclipse.cdt.core.language.mapping">
+ <project-mappings>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.asmSource" language="com.ti.ccstudio.core.TIASMLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cHeader" language="com.ti.ccstudio.core.TIGCCLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cSource" language="com.ti.ccstudio.core.TIGCCLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cxxHeader" language="com.ti.ccstudio.core.TIGPPLanguage"/>
+ <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cxxSource" language="com.ti.ccstudio.core.TIGPPLanguage"/>
+ </project-mappings>
+ </storageModule>
+</cproject>
diff --git a/boards/ek-tm4c123gxl/usb_dev_serial/ccs/.project b/boards/ek-tm4c123gxl/usb_dev_serial/ccs/.project new file mode 100644 index 0000000..ee822e9 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_serial/ccs/.project @@ -0,0 +1,65 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+ <name>usb_dev_serial</name>
+ <comment></comment>
+ <projects>
+ </projects>
+ <buildSpec>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+ <triggers>full,incremental,</triggers>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ </buildSpec>
+ <natures>
+ <nature>com.ti.ccstudio.core.ccsNature</nature>
+ <nature>org.eclipse.cdt.core.cnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+ <nature>org.eclipse.cdt.core.ccnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+ </natures>
+ <linkedResources>
+ <link>
+ <name>startup_ccs.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/usb_dev_serial/startup_ccs.c</locationURI>
+ </link>
+ <link>
+ <name>usb_dev_serial.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/usb_dev_serial/usb_dev_serial.c</locationURI>
+ </link>
+ <link>
+ <name>usb_dev_serial_ccs.cmd</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/usb_dev_serial/usb_dev_serial_ccs.cmd</locationURI>
+ </link>
+ <link>
+ <name>usb_serial_structs.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/examples/boards/ek-tm4c123gxl/usb_dev_serial/usb_serial_structs.c</locationURI>
+ </link>
+ <link>
+ <name>utils/uartstdio.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/utils/uartstdio.c</locationURI>
+ </link>
+ <link>
+ <name>utils/ustdlib.c</name>
+ <type>1</type>
+ <locationURI>SW_ROOT/utils/ustdlib.c</locationURI>
+ </link>
+ </linkedResources>
+ <variableList>
+ <variable>
+ <name>SW_ROOT</name>
+ <value>$%7BPARENT-5-PROJECT_LOC%7D</value>
+ </variable>
+ </variableList>
+</projectDescription>
diff --git a/boards/ek-tm4c123gxl/usb_dev_serial/ccs/.settings/org.eclipse.cdt.codan.core.prefs b/boards/ek-tm4c123gxl/usb_dev_serial/ccs/.settings/org.eclipse.cdt.codan.core.prefs new file mode 100644 index 0000000..98b6350 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_serial/ccs/.settings/org.eclipse.cdt.codan.core.prefs @@ -0,0 +1,3 @@ +eclipse.preferences.version=1
+inEditor=false
+onBuild=false
diff --git a/boards/ek-tm4c123gxl/usb_dev_serial/ccs/Debug/usb_dev_serial.bin b/boards/ek-tm4c123gxl/usb_dev_serial/ccs/Debug/usb_dev_serial.bin Binary files differnew file mode 100644 index 0000000..d1351d8 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_serial/ccs/Debug/usb_dev_serial.bin diff --git a/boards/ek-tm4c123gxl/usb_dev_serial/ccs/Debug/usb_dev_serial.out b/boards/ek-tm4c123gxl/usb_dev_serial/ccs/Debug/usb_dev_serial.out Binary files differnew file mode 100644 index 0000000..8ecfac2 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_serial/ccs/Debug/usb_dev_serial.out diff --git a/boards/ek-tm4c123gxl/usb_dev_serial/ccs/macros.ini_initial b/boards/ek-tm4c123gxl/usb_dev_serial/ccs/macros.ini_initial new file mode 100644 index 0000000..31214b5 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_serial/ccs/macros.ini_initial @@ -0,0 +1 @@ +SW_ROOT = ../../../../..
diff --git a/boards/ek-tm4c123gxl/usb_dev_serial/ccs/target_config.ccxml b/boards/ek-tm4c123gxl/usb_dev_serial/ccs/target_config.ccxml new file mode 100644 index 0000000..be4342a --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_serial/ccs/target_config.ccxml @@ -0,0 +1,13 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<configurations XML_version="1.2" id="configurations_0">
+ <configuration XML_version="1.2" id="Stellaris In-Circuit Debug Interface_0">
+ <instance XML_version="1.2" desc="Stellaris In-Circuit Debug Interface_0" href="connections/Stellaris_ICDI_Connection.xml" id="Stellaris In-Circuit Debug Interface_0" xml="Stellaris_ICDI_Connection.xml" xmlpath="connections"/>
+ <connection XML_version="1.2" id="Stellaris In-Circuit Debug Interface_0">
+ <instance XML_version="1.2" href="drivers/stellaris_cs_dap.xml" id="drivers" xml="stellaris_cs_dap.xml" xmlpath="drivers"/>
+ <instance XML_version="1.2" href="drivers/stellaris_cortex_m4.xml" id="drivers" xml="stellaris_cortex_m4.xml" xmlpath="drivers"/>
+ <platform XML_version="1.2" id="platform_0">
+ <instance XML_version="1.2" desc="Stellaris TM4C123GH6PM_0" href="devices/tm4c123gh6pm.xml" id="Stellaris TM4C123GH6PM_0" xml="tm4c123gh6pm.xml" xmlpath="devices"/>
+ </platform>
+ </connection>
+ </configuration>
+</configurations>
diff --git a/boards/ek-tm4c123gxl/usb_dev_serial/ewarm/Exe/usb_dev_serial.bin b/boards/ek-tm4c123gxl/usb_dev_serial/ewarm/Exe/usb_dev_serial.bin Binary files differnew file mode 100644 index 0000000..5ba8fdb --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_serial/ewarm/Exe/usb_dev_serial.bin diff --git a/boards/ek-tm4c123gxl/usb_dev_serial/ewarm/Exe/usb_dev_serial.out b/boards/ek-tm4c123gxl/usb_dev_serial/ewarm/Exe/usb_dev_serial.out Binary files differnew file mode 100644 index 0000000..72c74e3 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_serial/ewarm/Exe/usb_dev_serial.out diff --git a/boards/ek-tm4c123gxl/usb_dev_serial/gcc/usb_dev_serial.axf b/boards/ek-tm4c123gxl/usb_dev_serial/gcc/usb_dev_serial.axf Binary files differnew file mode 100644 index 0000000..a9dac91 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_serial/gcc/usb_dev_serial.axf diff --git a/boards/ek-tm4c123gxl/usb_dev_serial/gcc/usb_dev_serial.bin b/boards/ek-tm4c123gxl/usb_dev_serial/gcc/usb_dev_serial.bin Binary files differnew file mode 100644 index 0000000..9f81a00 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_serial/gcc/usb_dev_serial.bin diff --git a/boards/ek-tm4c123gxl/usb_dev_serial/readme.txt b/boards/ek-tm4c123gxl/usb_dev_serial/readme.txt new file mode 100644 index 0000000..8d9f718 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_serial/readme.txt @@ -0,0 +1,32 @@ +USB Serial Device
+
+This example application turns the evaluation kit into a virtual serial
+port when connected to the USB host system. The application supports the
+USB Communication Device Class, Abstract Control Model to redirect UART0
+traffic to and from the USB host system.
+
+Assuming you installed TivaWare C Series in the default directory, a
+driver information (INF) file for use with Windows XP, Windows Vista and
+Windows7 can be found in C:/ti/TivaWare-for-C-Series/windows_drivers. For
+Windows 2000, the required INF file is in
+C:/ti/TivaWare-for-C-Series/windows_drivers/win2K.
+
+-------------------------------------------------------------------------------
+
+Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+Software License Agreement
+
+Texas Instruments (TI) is supplying this software for use solely and
+exclusively on TI's microcontroller products. The software is owned by
+TI and/or its suppliers, and is protected under applicable copyright
+laws. You may not combine this software with "viral" open-source
+software in order to form a larger program.
+
+THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+DAMAGES, FOR ANY REASON WHATSOEVER.
+
+This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
diff --git a/boards/ek-tm4c123gxl/usb_dev_serial/rvmdk/usb_dev_serial.axf b/boards/ek-tm4c123gxl/usb_dev_serial/rvmdk/usb_dev_serial.axf Binary files differnew file mode 100644 index 0000000..72643dc --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_serial/rvmdk/usb_dev_serial.axf diff --git a/boards/ek-tm4c123gxl/usb_dev_serial/rvmdk/usb_dev_serial.bin b/boards/ek-tm4c123gxl/usb_dev_serial/rvmdk/usb_dev_serial.bin Binary files differnew file mode 100644 index 0000000..e350998 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_serial/rvmdk/usb_dev_serial.bin diff --git a/boards/ek-tm4c123gxl/usb_dev_serial/startup_ccs.c b/boards/ek-tm4c123gxl/usb_dev_serial/startup_ccs.c new file mode 100644 index 0000000..2f33bf7 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_serial/startup_ccs.c @@ -0,0 +1,304 @@ +//*****************************************************************************
+//
+// startup_ccs.c - Startup code for use with TI's Code Composer Studio.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// External declaration for the reset handler that is to be called when the
+// processor is started
+//
+//*****************************************************************************
+extern void _c_int00(void);
+
+//*****************************************************************************
+//
+// Linker variable that marks the top of the stack.
+//
+//*****************************************************************************
+extern uint32_t __STACK_TOP;
+
+//*****************************************************************************
+//
+// External declarations for the interrupt handlers used by the application.
+//
+//*****************************************************************************
+extern void SysTickIntHandler(void);
+extern void USBUARTIntHandler(void);
+extern void USB0DeviceIntHandler(void);
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000 or at the start of
+// the program if located at a start address other than 0.
+//
+//*****************************************************************************
+#pragma DATA_SECTION(g_pfnVectors, ".intvecs")
+void (* const g_pfnVectors[])(void) =
+{
+ (void (*)(void))((uint32_t)&__STACK_TOP),
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ SysTickIntHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ USBUARTIntHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ USB0DeviceIntHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ //
+ // Jump to the CCS C initialization routine. This will enable the
+ // floating-point unit as well, so that does not need to be done here.
+ //
+ __asm(" .global _c_int00\n"
+ " b.w _c_int00");
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/usb_dev_serial/startup_ewarm.c b/boards/ek-tm4c123gxl/usb_dev_serial/startup_ewarm.c new file mode 100644 index 0000000..5ddce10 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_serial/startup_ewarm.c @@ -0,0 +1,335 @@ +//*****************************************************************************
+//
+// startup_ewarm.c - Startup code for use with IAR's Embedded Workbench,
+// version 5.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Enable the IAR extensions for this source file.
+//
+//*****************************************************************************
+#pragma language=extended
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// External declarations for the interrupt handlers used by the application.
+//
+//*****************************************************************************
+extern void SysTickIntHandler(void);
+extern void USBUARTIntHandler(void);
+extern void USB0DeviceIntHandler(void);
+
+//*****************************************************************************
+//
+// The entry point for the application startup code.
+//
+//*****************************************************************************
+extern void __iar_program_start(void);
+
+//*****************************************************************************
+//
+// Reserve space for the system stack.
+//
+//*****************************************************************************
+static uint32_t pui32Stack[256] @ ".noinit";
+
+//*****************************************************************************
+//
+// A union that describes the entries of the vector table. The union is needed
+// since the first entry is the stack pointer and the remainder are function
+// pointers.
+//
+//*****************************************************************************
+typedef union
+{
+ void (*pfnHandler)(void);
+ uint32_t ui32Ptr;
+}
+uVectorEntry;
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000.
+//
+//*****************************************************************************
+__root const uVectorEntry __vector_table[] @ ".intvec" =
+{
+ { .ui32Ptr = (uint32_t)pui32Stack + sizeof(pui32Stack) },
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ SysTickIntHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ USBUARTIntHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ USB0DeviceIntHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ //
+ // Enable the floating-point unit. This must be done here to handle the
+ // case where main() uses floating-point and the function prologue saves
+ // floating-point registers (which will fault if floating-point is not
+ // enabled). Any configuration of the floating-point unit using DriverLib
+ // APIs must be done here prior to the floating-point unit being enabled.
+ //
+ // Note that this does not use DriverLib since it might not be included in
+ // this project.
+ //
+ HWREG(NVIC_CPAC) = ((HWREG(NVIC_CPAC) &
+ ~(NVIC_CPAC_CP10_M | NVIC_CPAC_CP11_M)) |
+ NVIC_CPAC_CP10_FULL | NVIC_CPAC_CP11_FULL);
+
+ //
+ // Call the application's entry point.
+ //
+ __iar_program_start();
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/usb_dev_serial/startup_gcc.c b/boards/ek-tm4c123gxl/usb_dev_serial/startup_gcc.c new file mode 100644 index 0000000..01e4550 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_serial/startup_gcc.c @@ -0,0 +1,351 @@ +//*****************************************************************************
+//
+// startup_gcc.c - Startup code for use with GNU tools.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include "inc/hw_nvic.h"
+#include "inc/hw_types.h"
+
+//*****************************************************************************
+//
+// Forward declaration of the default fault handlers.
+//
+//*****************************************************************************
+void ResetISR(void);
+static void NmiSR(void);
+static void FaultISR(void);
+static void IntDefaultHandler(void);
+
+//*****************************************************************************
+//
+// External declarations for the interrupt handlers used by the application.
+//
+//*****************************************************************************
+extern void SysTickIntHandler(void);
+extern void USBUARTIntHandler(void);
+extern void USB0DeviceIntHandler(void);
+
+//*****************************************************************************
+//
+// The entry point for the application.
+//
+//*****************************************************************************
+extern int main(void);
+
+//*****************************************************************************
+//
+// Reserve space for the system stack.
+//
+//*****************************************************************************
+static uint32_t pui32Stack[256];
+
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000.
+//
+//*****************************************************************************
+__attribute__ ((section(".isr_vector")))
+void (* const g_pfnVectors[])(void) =
+{
+ (void (*)(void))((uint32_t)pui32Stack + sizeof(pui32Stack)),
+ // The initial stack pointer
+ ResetISR, // The reset handler
+ NmiSR, // The NMI handler
+ FaultISR, // The hard fault handler
+ IntDefaultHandler, // The MPU fault handler
+ IntDefaultHandler, // The bus fault handler
+ IntDefaultHandler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // SVCall handler
+ IntDefaultHandler, // Debug monitor handler
+ 0, // Reserved
+ IntDefaultHandler, // The PendSV handler
+ SysTickIntHandler, // The SysTick handler
+ IntDefaultHandler, // GPIO Port A
+ IntDefaultHandler, // GPIO Port B
+ IntDefaultHandler, // GPIO Port C
+ IntDefaultHandler, // GPIO Port D
+ IntDefaultHandler, // GPIO Port E
+ USBUARTIntHandler, // UART0 Rx and Tx
+ IntDefaultHandler, // UART1 Rx and Tx
+ IntDefaultHandler, // SSI0 Rx and Tx
+ IntDefaultHandler, // I2C0 Master and Slave
+ IntDefaultHandler, // PWM Fault
+ IntDefaultHandler, // PWM Generator 0
+ IntDefaultHandler, // PWM Generator 1
+ IntDefaultHandler, // PWM Generator 2
+ IntDefaultHandler, // Quadrature Encoder 0
+ IntDefaultHandler, // ADC Sequence 0
+ IntDefaultHandler, // ADC Sequence 1
+ IntDefaultHandler, // ADC Sequence 2
+ IntDefaultHandler, // ADC Sequence 3
+ IntDefaultHandler, // Watchdog timer
+ IntDefaultHandler, // Timer 0 subtimer A
+ IntDefaultHandler, // Timer 0 subtimer B
+ IntDefaultHandler, // Timer 1 subtimer A
+ IntDefaultHandler, // Timer 1 subtimer B
+ IntDefaultHandler, // Timer 2 subtimer A
+ IntDefaultHandler, // Timer 2 subtimer B
+ IntDefaultHandler, // Analog Comparator 0
+ IntDefaultHandler, // Analog Comparator 1
+ IntDefaultHandler, // Analog Comparator 2
+ IntDefaultHandler, // System Control (PLL, OSC, BO)
+ IntDefaultHandler, // FLASH Control
+ IntDefaultHandler, // GPIO Port F
+ IntDefaultHandler, // GPIO Port G
+ IntDefaultHandler, // GPIO Port H
+ IntDefaultHandler, // UART2 Rx and Tx
+ IntDefaultHandler, // SSI1 Rx and Tx
+ IntDefaultHandler, // Timer 3 subtimer A
+ IntDefaultHandler, // Timer 3 subtimer B
+ IntDefaultHandler, // I2C1 Master and Slave
+ IntDefaultHandler, // Quadrature Encoder 1
+ IntDefaultHandler, // CAN0
+ IntDefaultHandler, // CAN1
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Hibernate
+ USB0DeviceIntHandler, // USB0
+ IntDefaultHandler, // PWM Generator 3
+ IntDefaultHandler, // uDMA Software Transfer
+ IntDefaultHandler, // uDMA Error
+ IntDefaultHandler, // ADC1 Sequence 0
+ IntDefaultHandler, // ADC1 Sequence 1
+ IntDefaultHandler, // ADC1 Sequence 2
+ IntDefaultHandler, // ADC1 Sequence 3
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port J
+ IntDefaultHandler, // GPIO Port K
+ IntDefaultHandler, // GPIO Port L
+ IntDefaultHandler, // SSI2 Rx and Tx
+ IntDefaultHandler, // SSI3 Rx and Tx
+ IntDefaultHandler, // UART3 Rx and Tx
+ IntDefaultHandler, // UART4 Rx and Tx
+ IntDefaultHandler, // UART5 Rx and Tx
+ IntDefaultHandler, // UART6 Rx and Tx
+ IntDefaultHandler, // UART7 Rx and Tx
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C2 Master and Slave
+ IntDefaultHandler, // I2C3 Master and Slave
+ IntDefaultHandler, // Timer 4 subtimer A
+ IntDefaultHandler, // Timer 4 subtimer B
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // Timer 5 subtimer A
+ IntDefaultHandler, // Timer 5 subtimer B
+ IntDefaultHandler, // Wide Timer 0 subtimer A
+ IntDefaultHandler, // Wide Timer 0 subtimer B
+ IntDefaultHandler, // Wide Timer 1 subtimer A
+ IntDefaultHandler, // Wide Timer 1 subtimer B
+ IntDefaultHandler, // Wide Timer 2 subtimer A
+ IntDefaultHandler, // Wide Timer 2 subtimer B
+ IntDefaultHandler, // Wide Timer 3 subtimer A
+ IntDefaultHandler, // Wide Timer 3 subtimer B
+ IntDefaultHandler, // Wide Timer 4 subtimer A
+ IntDefaultHandler, // Wide Timer 4 subtimer B
+ IntDefaultHandler, // Wide Timer 5 subtimer A
+ IntDefaultHandler, // Wide Timer 5 subtimer B
+ IntDefaultHandler, // FPU
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // I2C4 Master and Slave
+ IntDefaultHandler, // I2C5 Master and Slave
+ IntDefaultHandler, // GPIO Port M
+ IntDefaultHandler, // GPIO Port N
+ IntDefaultHandler, // Quadrature Encoder 2
+ 0, // Reserved
+ 0, // Reserved
+ IntDefaultHandler, // GPIO Port P (Summary or P0)
+ IntDefaultHandler, // GPIO Port P1
+ IntDefaultHandler, // GPIO Port P2
+ IntDefaultHandler, // GPIO Port P3
+ IntDefaultHandler, // GPIO Port P4
+ IntDefaultHandler, // GPIO Port P5
+ IntDefaultHandler, // GPIO Port P6
+ IntDefaultHandler, // GPIO Port P7
+ IntDefaultHandler, // GPIO Port Q (Summary or Q0)
+ IntDefaultHandler, // GPIO Port Q1
+ IntDefaultHandler, // GPIO Port Q2
+ IntDefaultHandler, // GPIO Port Q3
+ IntDefaultHandler, // GPIO Port Q4
+ IntDefaultHandler, // GPIO Port Q5
+ IntDefaultHandler, // GPIO Port Q6
+ IntDefaultHandler, // GPIO Port Q7
+ IntDefaultHandler, // GPIO Port R
+ IntDefaultHandler, // GPIO Port S
+ IntDefaultHandler, // PWM 1 Generator 0
+ IntDefaultHandler, // PWM 1 Generator 1
+ IntDefaultHandler, // PWM 1 Generator 2
+ IntDefaultHandler, // PWM 1 Generator 3
+ IntDefaultHandler // PWM 1 Fault
+};
+
+//*****************************************************************************
+//
+// The following are constructs created by the linker, indicating where the
+// the "data" and "bss" segments reside in memory. The initializers for the
+// for the "data" segment resides immediately following the "text" segment.
+//
+//*****************************************************************************
+extern uint32_t _etext;
+extern uint32_t _data;
+extern uint32_t _edata;
+extern uint32_t _bss;
+extern uint32_t _ebss;
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void)
+{
+ uint32_t *pui32Src, *pui32Dest;
+
+ //
+ // Copy the data segment initializers from flash to SRAM.
+ //
+ pui32Src = &_etext;
+ for(pui32Dest = &_data; pui32Dest < &_edata; )
+ {
+ *pui32Dest++ = *pui32Src++;
+ }
+
+ //
+ // Zero fill the bss segment.
+ //
+ __asm(" ldr r0, =_bss\n"
+ " ldr r1, =_ebss\n"
+ " mov r2, #0\n"
+ " .thumb_func\n"
+ "zero_loop:\n"
+ " cmp r0, r1\n"
+ " it lt\n"
+ " strlt r2, [r0], #4\n"
+ " blt zero_loop");
+
+ //
+ // Enable the floating-point unit. This must be done here to handle the
+ // case where main() uses floating-point and the function prologue saves
+ // floating-point registers (which will fault if floating-point is not
+ // enabled). Any configuration of the floating-point unit using DriverLib
+ // APIs must be done here prior to the floating-point unit being enabled.
+ //
+ // Note that this does not use DriverLib since it might not be included in
+ // this project.
+ //
+ HWREG(NVIC_CPAC) = ((HWREG(NVIC_CPAC) &
+ ~(NVIC_CPAC_CP10_M | NVIC_CPAC_CP11_M)) |
+ NVIC_CPAC_CP10_FULL | NVIC_CPAC_CP11_FULL);
+
+ //
+ // Call the application's entry point.
+ //
+ main();
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+static void
+NmiSR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a fault
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+FaultISR(void)
+{
+ //
+ // Enter an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives an unexpected
+// interrupt. This simply enters an infinite loop, preserving the system state
+// for examination by a debugger.
+//
+//*****************************************************************************
+static void
+IntDefaultHandler(void)
+{
+ //
+ // Go into an infinite loop.
+ //
+ while(1)
+ {
+ }
+}
diff --git a/boards/ek-tm4c123gxl/usb_dev_serial/startup_rvmdk.S b/boards/ek-tm4c123gxl/usb_dev_serial/startup_rvmdk.S new file mode 100644 index 0000000..1a9624c --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_serial/startup_rvmdk.S @@ -0,0 +1,360 @@ +; <<< Use Configuration Wizard in Context Menu >>>
+;******************************************************************************
+;
+; startup_rvmdk.S - Startup code for use with Keil's uVision.
+;
+; Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+; Software License Agreement
+;
+; Texas Instruments (TI) is supplying this software for use solely and
+; exclusively on TI's microcontroller products. The software is owned by
+; TI and/or its suppliers, and is protected under applicable copyright
+; laws. You may not combine this software with "viral" open-source
+; software in order to form a larger program.
+;
+; THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+; NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+; NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+; A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+; CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+; DAMAGES, FOR ANY REASON WHATSOEVER.
+;
+; This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+;
+;******************************************************************************
+
+;******************************************************************************
+;
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+;******************************************************************************
+Stack EQU 0x00000400
+
+;******************************************************************************
+;
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+;******************************************************************************
+Heap EQU 0x00000000
+
+;******************************************************************************
+;
+; Allocate space for the stack.
+;
+;******************************************************************************
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+StackMem
+ SPACE Stack
+__initial_sp
+
+;******************************************************************************
+;
+; Allocate space for the heap.
+;
+;******************************************************************************
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+HeapMem
+ SPACE Heap
+__heap_limit
+
+;******************************************************************************
+;
+; Indicate that the code in this file preserves 8-byte alignment of the stack.
+;
+;******************************************************************************
+ PRESERVE8
+
+;******************************************************************************
+;
+; Place code into the reset code section.
+;
+;******************************************************************************
+ AREA RESET, CODE, READONLY
+ THUMB
+
+;******************************************************************************
+;
+; External declarations for the interrupt handlers used by the application.
+;
+;******************************************************************************
+ EXTERN SysTickIntHandler
+ EXTERN USBUARTIntHandler
+ EXTERN USB0DeviceIntHandler
+
+;******************************************************************************
+;
+; The vector table.
+;
+;******************************************************************************
+ EXPORT __Vectors
+__Vectors
+ DCD StackMem + Stack ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NmiSR ; NMI Handler
+ DCD FaultISR ; Hard Fault Handler
+ DCD IntDefaultHandler ; The MPU fault handler
+ DCD IntDefaultHandler ; The bus fault handler
+ DCD IntDefaultHandler ; The usage fault handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; SVCall handler
+ DCD IntDefaultHandler ; Debug monitor handler
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; The PendSV handler
+ DCD SysTickIntHandler ; The SysTick handler
+ DCD IntDefaultHandler ; GPIO Port A
+ DCD IntDefaultHandler ; GPIO Port B
+ DCD IntDefaultHandler ; GPIO Port C
+ DCD IntDefaultHandler ; GPIO Port D
+ DCD IntDefaultHandler ; GPIO Port E
+ DCD USBUARTIntHandler ; UART0 Rx and Tx
+ DCD IntDefaultHandler ; UART1 Rx and Tx
+ DCD IntDefaultHandler ; SSI0 Rx and Tx
+ DCD IntDefaultHandler ; I2C0 Master and Slave
+ DCD IntDefaultHandler ; PWM Fault
+ DCD IntDefaultHandler ; PWM Generator 0
+ DCD IntDefaultHandler ; PWM Generator 1
+ DCD IntDefaultHandler ; PWM Generator 2
+ DCD IntDefaultHandler ; Quadrature Encoder 0
+ DCD IntDefaultHandler ; ADC Sequence 0
+ DCD IntDefaultHandler ; ADC Sequence 1
+ DCD IntDefaultHandler ; ADC Sequence 2
+ DCD IntDefaultHandler ; ADC Sequence 3
+ DCD IntDefaultHandler ; Watchdog timer
+ DCD IntDefaultHandler ; Timer 0 subtimer A
+ DCD IntDefaultHandler ; Timer 0 subtimer B
+ DCD IntDefaultHandler ; Timer 1 subtimer A
+ DCD IntDefaultHandler ; Timer 1 subtimer B
+ DCD IntDefaultHandler ; Timer 2 subtimer A
+ DCD IntDefaultHandler ; Timer 2 subtimer B
+ DCD IntDefaultHandler ; Analog Comparator 0
+ DCD IntDefaultHandler ; Analog Comparator 1
+ DCD IntDefaultHandler ; Analog Comparator 2
+ DCD IntDefaultHandler ; System Control (PLL, OSC, BO)
+ DCD IntDefaultHandler ; FLASH Control
+ DCD IntDefaultHandler ; GPIO Port F
+ DCD IntDefaultHandler ; GPIO Port G
+ DCD IntDefaultHandler ; GPIO Port H
+ DCD IntDefaultHandler ; UART2 Rx and Tx
+ DCD IntDefaultHandler ; SSI1 Rx and Tx
+ DCD IntDefaultHandler ; Timer 3 subtimer A
+ DCD IntDefaultHandler ; Timer 3 subtimer B
+ DCD IntDefaultHandler ; I2C1 Master and Slave
+ DCD IntDefaultHandler ; Quadrature Encoder 1
+ DCD IntDefaultHandler ; CAN0
+ DCD IntDefaultHandler ; CAN1
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; Hibernate
+ DCD USB0DeviceIntHandler ; USB0
+ DCD IntDefaultHandler ; PWM Generator 3
+ DCD IntDefaultHandler ; uDMA Software Transfer
+ DCD IntDefaultHandler ; uDMA Error
+ DCD IntDefaultHandler ; ADC1 Sequence 0
+ DCD IntDefaultHandler ; ADC1 Sequence 1
+ DCD IntDefaultHandler ; ADC1 Sequence 2
+ DCD IntDefaultHandler ; ADC1 Sequence 3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; GPIO Port J
+ DCD IntDefaultHandler ; GPIO Port K
+ DCD IntDefaultHandler ; GPIO Port L
+ DCD IntDefaultHandler ; SSI2 Rx and Tx
+ DCD IntDefaultHandler ; SSI3 Rx and Tx
+ DCD IntDefaultHandler ; UART3 Rx and Tx
+ DCD IntDefaultHandler ; UART4 Rx and Tx
+ DCD IntDefaultHandler ; UART5 Rx and Tx
+ DCD IntDefaultHandler ; UART6 Rx and Tx
+ DCD IntDefaultHandler ; UART7 Rx and Tx
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; I2C2 Master and Slave
+ DCD IntDefaultHandler ; I2C3 Master and Slave
+ DCD IntDefaultHandler ; Timer 4 subtimer A
+ DCD IntDefaultHandler ; Timer 4 subtimer B
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; Timer 5 subtimer A
+ DCD IntDefaultHandler ; Timer 5 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 0 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 0 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 1 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 1 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 2 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 2 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 3 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 3 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 4 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 4 subtimer B
+ DCD IntDefaultHandler ; Wide Timer 5 subtimer A
+ DCD IntDefaultHandler ; Wide Timer 5 subtimer B
+ DCD IntDefaultHandler ; FPU
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; I2C4 Master and Slave
+ DCD IntDefaultHandler ; I2C5 Master and Slave
+ DCD IntDefaultHandler ; GPIO Port M
+ DCD IntDefaultHandler ; GPIO Port N
+ DCD IntDefaultHandler ; Quadrature Encoder 2
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD IntDefaultHandler ; GPIO Port P (Summary or P0)
+ DCD IntDefaultHandler ; GPIO Port P1
+ DCD IntDefaultHandler ; GPIO Port P2
+ DCD IntDefaultHandler ; GPIO Port P3
+ DCD IntDefaultHandler ; GPIO Port P4
+ DCD IntDefaultHandler ; GPIO Port P5
+ DCD IntDefaultHandler ; GPIO Port P6
+ DCD IntDefaultHandler ; GPIO Port P7
+ DCD IntDefaultHandler ; GPIO Port Q (Summary or Q0)
+ DCD IntDefaultHandler ; GPIO Port Q1
+ DCD IntDefaultHandler ; GPIO Port Q2
+ DCD IntDefaultHandler ; GPIO Port Q3
+ DCD IntDefaultHandler ; GPIO Port Q4
+ DCD IntDefaultHandler ; GPIO Port Q5
+ DCD IntDefaultHandler ; GPIO Port Q6
+ DCD IntDefaultHandler ; GPIO Port Q7
+ DCD IntDefaultHandler ; GPIO Port R
+ DCD IntDefaultHandler ; GPIO Port S
+ DCD IntDefaultHandler ; PWM 1 Generator 0
+ DCD IntDefaultHandler ; PWM 1 Generator 1
+ DCD IntDefaultHandler ; PWM 1 Generator 2
+ DCD IntDefaultHandler ; PWM 1 Generator 3
+ DCD IntDefaultHandler ; PWM 1 Fault
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor first starts execution
+; following a reset event.
+;
+;******************************************************************************
+ EXPORT Reset_Handler
+Reset_Handler
+ ;
+ ; Enable the floating-point unit. This must be done here to handle the
+ ; case where main() uses floating-point and the function prologue saves
+ ; floating-point registers (which will fault if floating-point is not
+ ; enabled). Any configuration of the floating-point unit using
+ ; DriverLib APIs must be done here prior to the floating-point unit
+ ; being enabled.
+ ;
+ ; Note that this does not use DriverLib since it might not be included
+ ; in this project.
+ ;
+ MOVW R0, #0xED88
+ MOVT R0, #0xE000
+ LDR R1, [R0]
+ ORR R1, #0x00F00000
+ STR R1, [R0]
+
+ ;
+ ; Call the C library enty point that handles startup. This will copy
+ ; the .data section initializers from flash to SRAM and zero fill the
+ ; .bss section.
+ ;
+ IMPORT __main
+ B __main
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives a NMI. This
+; simply enters an infinite loop, preserving the system state for examination
+; by a debugger.
+;
+;******************************************************************************
+NmiSR
+ B NmiSR
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives a fault
+; interrupt. This simply enters an infinite loop, preserving the system state
+; for examination by a debugger.
+;
+;******************************************************************************
+FaultISR
+ B FaultISR
+
+;******************************************************************************
+;
+; This is the code that gets called when the processor receives an unexpected
+; interrupt. This simply enters an infinite loop, preserving the system state
+; for examination by a debugger.
+;
+;******************************************************************************
+IntDefaultHandler
+ B IntDefaultHandler
+
+;******************************************************************************
+;
+; Make sure the end of this section is aligned.
+;
+;******************************************************************************
+ ALIGN
+
+;******************************************************************************
+;
+; Some code in the normal code section for initializing the heap and stack.
+;
+;******************************************************************************
+ AREA |.text|, CODE, READONLY
+
+;******************************************************************************
+;
+; The function expected of the C library startup code for defining the stack
+; and heap memory locations. For the C library version of the startup code,
+; provide this function so that the C library initialization code can find out
+; the location of the stack and heap.
+;
+;******************************************************************************
+ IF :DEF: __MICROLIB
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+ ELSE
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+__user_initial_stackheap
+ LDR R0, =HeapMem
+ LDR R1, =(StackMem + Stack)
+ LDR R2, =(HeapMem + Heap)
+ LDR R3, =StackMem
+ BX LR
+ ENDIF
+
+;******************************************************************************
+;
+; Make sure the end of this section is aligned.
+;
+;******************************************************************************
+ ALIGN
+
+;******************************************************************************
+;
+; Tell the assembler that we're done.
+;
+;******************************************************************************
+ END
diff --git a/boards/ek-tm4c123gxl/usb_dev_serial/usb_dev_serial.c b/boards/ek-tm4c123gxl/usb_dev_serial/usb_dev_serial.c new file mode 100644 index 0000000..75dffab --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_serial/usb_dev_serial.c @@ -0,0 +1,1222 @@ +//*****************************************************************************
+//
+// usb_dev_serial.c - Main routines for the USB CDC serial example.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdbool.h>
+#include <stdint.h>
+#include "inc/hw_ints.h"
+#include "inc/hw_memmap.h"
+#include "inc/hw_types.h"
+#include "inc/hw_gpio.h"
+#include "inc/hw_uart.h"
+#include "inc/hw_sysctl.h"
+#include "driverlib/debug.h"
+#include "driverlib/fpu.h"
+#include "driverlib/gpio.h"
+#include "driverlib/pin_map.h"
+#include "driverlib/interrupt.h"
+#include "driverlib/sysctl.h"
+#include "driverlib/systick.h"
+#include "driverlib/timer.h"
+#include "driverlib/uart.h"
+#include "driverlib/usb.h"
+#include "driverlib/rom.h"
+#include "usblib/usblib.h"
+#include "usblib/usbcdc.h"
+#include "usblib/usb-ids.h"
+#include "usblib/device/usbdevice.h"
+#include "usblib/device/usbdcdc.h"
+#include "utils/ustdlib.h"
+#include "usb_serial_structs.h"
+#include "utils/uartstdio.h"
+
+//*****************************************************************************
+//
+//! \addtogroup example_list
+//! <h1>USB Serial Device (usb_dev_serial)</h1>
+//!
+//! This example application turns the evaluation kit into a virtual serial
+//! port when connected to the USB host system. The application supports the
+//! USB Communication Device Class, Abstract Control Model to redirect UART0
+//! traffic to and from the USB host system.
+//!
+//! Assuming you installed TivaWare C Series in the default directory, a
+//! driver information (INF) file for use with Windows XP, Windows Vista and
+//! Windows7 can be found in C:/ti/TivaWare-for-C-Series/windows_drivers. For
+//! Windows 2000, the required INF file is in
+//! C:/ti/TivaWare-for-C-Series/windows_drivers/win2K.
+//
+//*****************************************************************************
+
+//*****************************************************************************
+//
+// Note:
+//
+// This example is intended to run on Tiva C Series evaluation kit hardware
+// where the UARTs are wired solely for TX and RX, and do not have GPIOs
+// connected to act as handshake signals. As a result, this example mimics
+// the case where communication is always possible. It reports DSR, DCD
+// and CTS as high to ensure that the USB host recognizes that data can be
+// sent and merely ignores the host's requested DTR and RTS states. "TODO"
+// comments in the code indicate where code would be required to add support
+// for real handshakes.
+//
+//*****************************************************************************
+
+//*****************************************************************************
+//
+// Configuration and tuning parameters.
+//
+//*****************************************************************************
+
+//*****************************************************************************
+//
+// The system tick rate expressed both as ticks per second and a millisecond
+// period.
+//
+//*****************************************************************************
+#define SYSTICKS_PER_SECOND 100
+#define SYSTICK_PERIOD_MS (1000 / SYSTICKS_PER_SECOND)
+
+//*****************************************************************************
+//
+// Variables tracking transmit and receive counts.
+//
+//*****************************************************************************
+volatile uint32_t g_ui32UARTTxCount = 0;
+volatile uint32_t g_ui32UARTRxCount = 0;
+#ifdef DEBUG
+uint32_t g_ui32UARTRxErrors = 0;
+#endif
+
+//*****************************************************************************
+//
+// The base address, peripheral ID and interrupt ID of the UART that is to
+// be redirected.
+//
+//*****************************************************************************
+
+//*****************************************************************************
+//
+// Defines required to redirect UART0 via USB.
+//
+//*****************************************************************************
+#define USB_UART_BASE UART0_BASE
+#define USB_UART_PERIPH SYSCTL_PERIPH_UART0
+#define USB_UART_INT INT_UART0
+
+//*****************************************************************************
+//
+// Default line coding settings for the redirected UART.
+//
+//*****************************************************************************
+#define DEFAULT_BIT_RATE 115200
+#define DEFAULT_UART_CONFIG (UART_CONFIG_WLEN_8 | UART_CONFIG_PAR_NONE | \
+ UART_CONFIG_STOP_ONE)
+
+//*****************************************************************************
+//
+// GPIO peripherals and pins muxed with the redirected UART. These will depend
+// upon the IC in use and the UART selected in USB_UART_BASE. Be careful that
+// these settings all agree with the hardware you are using.
+//
+//*****************************************************************************
+
+//*****************************************************************************
+//
+// Defines required to redirect UART0 via USB.
+//
+//*****************************************************************************
+#define TX_GPIO_BASE GPIO_PORTA_BASE
+#define TX_GPIO_PERIPH SYSCTL_PERIPH_GPIOA
+#define TX_GPIO_PIN GPIO_PIN_1
+
+#define RX_GPIO_BASE GPIO_PORTA_BASE
+#define RX_GPIO_PERIPH SYSCTL_PERIPH_GPIOA
+#define RX_GPIO_PIN GPIO_PIN_0
+
+//*****************************************************************************
+//
+// Flag indicating whether or not we are currently sending a Break condition.
+//
+//*****************************************************************************
+static bool g_bSendingBreak = false;
+
+//*****************************************************************************
+//
+// Global system tick counter
+//
+//*****************************************************************************
+volatile uint32_t g_ui32SysTickCount = 0;
+
+//*****************************************************************************
+//
+// Flags used to pass commands from interrupt context to the main loop.
+//
+//*****************************************************************************
+#define COMMAND_PACKET_RECEIVED 0x00000001
+#define COMMAND_STATUS_UPDATE 0x00000002
+
+volatile uint32_t g_ui32Flags = 0;
+char *g_pcStatus;
+
+//*****************************************************************************
+//
+// Global flag indicating that a USB configuration has been set.
+//
+//*****************************************************************************
+static volatile bool g_bUSBConfigured = false;
+
+//*****************************************************************************
+//
+// Internal function prototypes.
+//
+//*****************************************************************************
+static void USBUARTPrimeTransmit(uint32_t ui32Base);
+static void CheckForSerialStateChange(const tUSBDCDCDevice *psDevice,
+ int32_t i32Errors);
+static void SetControlLineState(uint16_t ui16State);
+static bool SetLineCoding(tLineCoding *psLineCoding);
+static void GetLineCoding(tLineCoding *psLineCoding);
+static void SendBreak(bool bSend);
+
+//*****************************************************************************
+//
+// The error routine that is called if the driver library encounters an error.
+//
+//*****************************************************************************
+#ifdef DEBUG
+void
+__error__(char *pcFilename, uint32_t ui32Line)
+{
+ while(1)
+ {
+ }
+}
+#endif
+
+//*****************************************************************************
+//
+// This function is called whenever serial data is received from the UART.
+// It is passed the accumulated error flags from each character received in
+// this interrupt and determines from them whether or not an interrupt
+// notification to the host is required.
+//
+// If a notification is required and the control interrupt endpoint is idle,
+// we send the notification immediately. If the endpoint is not idle, we
+// accumulate the errors in a global variable which will be checked on
+// completion of the previous notification and used to send a second one
+// if necessary.
+//
+//*****************************************************************************
+static void
+CheckForSerialStateChange(const tUSBDCDCDevice *psDevice, int32_t i32Errors)
+{
+ uint16_t ui16SerialState;
+
+ //
+ // Clear our USB serial state. Since we are faking the handshakes, always
+ // set the TXCARRIER (DSR) and RXCARRIER (DCD) bits.
+ //
+ ui16SerialState = USB_CDC_SERIAL_STATE_TXCARRIER |
+ USB_CDC_SERIAL_STATE_RXCARRIER;
+
+ //
+ // Are any error bits set?
+ //
+ if(i32Errors)
+ {
+ //
+ // At least one error is being notified so translate from our hardware
+ // error bits into the correct state markers for the USB notification.
+ //
+ if(i32Errors & UART_DR_OE)
+ {
+ ui16SerialState |= USB_CDC_SERIAL_STATE_OVERRUN;
+ }
+
+ if(i32Errors & UART_DR_PE)
+ {
+ ui16SerialState |= USB_CDC_SERIAL_STATE_PARITY;
+ }
+
+ if(i32Errors & UART_DR_FE)
+ {
+ ui16SerialState |= USB_CDC_SERIAL_STATE_FRAMING;
+ }
+
+ if(i32Errors & UART_DR_BE)
+ {
+ ui16SerialState |= USB_CDC_SERIAL_STATE_BREAK;
+ }
+
+ // Call the CDC driver to notify the state change.
+ USBDCDCSerialStateChange((void *)psDevice, ui16SerialState);
+ }
+}
+
+//*****************************************************************************
+//
+// Read as many characters from the UART FIFO as we can and move them into
+// the CDC transmit buffer.
+//
+// \return Returns UART error flags read during data reception.
+//
+//*****************************************************************************
+static int32_t
+ReadUARTData(void)
+{
+ int32_t i32Char, i32Errors;
+ uint8_t ui8Char;
+ uint32_t ui32Space;
+
+ //
+ // Clear our error indicator.
+ //
+ i32Errors = 0;
+
+ //
+ // How much space do we have in the buffer?
+ //
+ ui32Space = USBBufferSpaceAvailable((tUSBBuffer *)&g_sTxBuffer);
+
+ //
+ // Read data from the UART FIFO until there is none left or we run
+ // out of space in our receive buffer.
+ //
+ while(ui32Space && ROM_UARTCharsAvail(USB_UART_BASE))
+ {
+ //
+ // Read a character from the UART FIFO into the ring buffer if no
+ // errors are reported.
+ //
+ i32Char = ROM_UARTCharGetNonBlocking(USB_UART_BASE);
+
+ //
+ // If the character did not contain any error notifications,
+ // copy it to the output buffer.
+ //
+ if(!(i32Char & ~0xFF))
+ {
+ ui8Char = (uint8_t)(i32Char & 0xFF);
+ USBBufferWrite((tUSBBuffer *)&g_sTxBuffer,
+ (uint8_t *)&ui8Char, 1);
+
+ //
+ // Decrement the number of bytes we know the buffer can accept.
+ //
+ ui32Space--;
+ }
+ else
+ {
+#ifdef DEBUG
+ //
+ // Increment our receive error counter.
+ //
+ g_ui32UARTRxErrors++;
+#endif
+ //
+ // Update our error accumulator.
+ //
+ i32Errors |= i32Char;
+ }
+
+ //
+ // Update our count of bytes received via the UART.
+ //
+ g_ui32UARTRxCount++;
+ }
+
+ //
+ // Pass back the accumulated error indicators.
+ //
+ return(i32Errors);
+}
+
+//*****************************************************************************
+//
+// Take as many bytes from the transmit buffer as we have space for and move
+// them into the USB UART's transmit FIFO.
+//
+//*****************************************************************************
+static void
+USBUARTPrimeTransmit(uint32_t ui32Base)
+{
+ uint32_t ui32Read;
+ uint8_t ui8Char;
+
+ //
+ // If we are currently sending a break condition, don't receive any
+ // more data. We will resume transmission once the break is turned off.
+ //
+ if(g_bSendingBreak)
+ {
+ return;
+ }
+
+ //
+ // If there is space in the UART FIFO, try to read some characters
+ // from the receive buffer to fill it again.
+ //
+ while(ROM_UARTSpaceAvail(ui32Base))
+ {
+ //
+ // Get a character from the buffer.
+ //
+ ui32Read = USBBufferRead((tUSBBuffer *)&g_sRxBuffer, &ui8Char, 1);
+
+ //
+ // Did we get a character?
+ //
+ if(ui32Read)
+ {
+ //
+ // Place the character in the UART transmit FIFO.
+ //
+ ROM_UARTCharPutNonBlocking(ui32Base, ui8Char);
+
+ //
+ // Update our count of bytes transmitted via the UART.
+ //
+ g_ui32UARTTxCount++;
+ }
+ else
+ {
+ //
+ // We ran out of characters so exit the function.
+ //
+ return;
+ }
+ }
+}
+
+//*****************************************************************************
+//
+// Interrupt handler for the system tick counter.
+//
+//*****************************************************************************
+void
+SysTickIntHandler(void)
+{
+ //
+ // Update our system time.
+ //
+ g_ui32SysTickCount++;
+}
+
+//*****************************************************************************
+//
+// Interrupt handler for the UART which we are redirecting via USB.
+//
+//*****************************************************************************
+void
+USBUARTIntHandler(void)
+{
+ uint32_t ui32Ints;
+ int32_t i32Errors;
+
+ //
+ // Get and clear the current interrupt source(s)
+ //
+ ui32Ints = ROM_UARTIntStatus(USB_UART_BASE, true);
+ ROM_UARTIntClear(USB_UART_BASE, ui32Ints);
+
+ //
+ // Are we being interrupted because the TX FIFO has space available?
+ //
+ if(ui32Ints & UART_INT_TX)
+ {
+ //
+ // Move as many bytes as we can into the transmit FIFO.
+ //
+ USBUARTPrimeTransmit(USB_UART_BASE);
+
+ //
+ // If the output buffer is empty, turn off the transmit interrupt.
+ //
+ if(!USBBufferDataAvailable(&g_sRxBuffer))
+ {
+ ROM_UARTIntDisable(USB_UART_BASE, UART_INT_TX);
+ }
+ }
+
+ //
+ // Handle receive interrupts.
+ //
+ if(ui32Ints & (UART_INT_RX | UART_INT_RT))
+ {
+ //
+ // Read the UART's characters into the buffer.
+ //
+ i32Errors = ReadUARTData();
+
+ //
+ // Check to see if we need to notify the host of any errors we just
+ // detected.
+ //
+ CheckForSerialStateChange(&g_sCDCDevice, i32Errors);
+ }
+}
+
+//*****************************************************************************
+//
+// Set the state of the RS232 RTS and DTR signals.
+//
+//*****************************************************************************
+static void
+SetControlLineState(uint16_t ui16State)
+{
+ //
+ // TODO: If configured with GPIOs controlling the handshake lines,
+ // set them appropriately depending upon the flags passed in the wValue
+ // field of the request structure passed.
+ //
+}
+
+//*****************************************************************************
+//
+// Set the communication parameters to use on the UART.
+//
+//*****************************************************************************
+static bool
+SetLineCoding(tLineCoding *psLineCoding)
+{
+ uint32_t ui32Config;
+ bool bRetcode;
+
+ //
+ // Assume everything is OK until we detect any problem.
+ //
+ bRetcode = true;
+
+ //
+ // Word length. For invalid values, the default is to set 8 bits per
+ // character and return an error.
+ //
+ switch(psLineCoding->ui8Databits)
+ {
+ case 5:
+ {
+ ui32Config = UART_CONFIG_WLEN_5;
+ break;
+ }
+
+ case 6:
+ {
+ ui32Config = UART_CONFIG_WLEN_6;
+ break;
+ }
+
+ case 7:
+ {
+ ui32Config = UART_CONFIG_WLEN_7;
+ break;
+ }
+
+ case 8:
+ {
+ ui32Config = UART_CONFIG_WLEN_8;
+ break;
+ }
+
+ default:
+ {
+ ui32Config = UART_CONFIG_WLEN_8;
+ bRetcode = false;
+ break;
+ }
+ }
+
+ //
+ // Parity. For any invalid values, we set no parity and return an error.
+ //
+ switch(psLineCoding->ui8Parity)
+ {
+ case USB_CDC_PARITY_NONE:
+ {
+ ui32Config |= UART_CONFIG_PAR_NONE;
+ break;
+ }
+
+ case USB_CDC_PARITY_ODD:
+ {
+ ui32Config |= UART_CONFIG_PAR_ODD;
+ break;
+ }
+
+ case USB_CDC_PARITY_EVEN:
+ {
+ ui32Config |= UART_CONFIG_PAR_EVEN;
+ break;
+ }
+
+ case USB_CDC_PARITY_MARK:
+ {
+ ui32Config |= UART_CONFIG_PAR_ONE;
+ break;
+ }
+
+ case USB_CDC_PARITY_SPACE:
+ {
+ ui32Config |= UART_CONFIG_PAR_ZERO;
+ break;
+ }
+
+ default:
+ {
+ ui32Config |= UART_CONFIG_PAR_NONE;
+ bRetcode = false;
+ break;
+ }
+ }
+
+ //
+ // Stop bits. Our hardware only supports 1 or 2 stop bits whereas CDC
+ // allows the host to select 1.5 stop bits. If passed 1.5 (or any other
+ // invalid or unsupported value of ui8Stop, we set up for 1 stop bit but
+ // return an error in case the caller needs to Stall or otherwise report
+ // this back to the host.
+ //
+ switch(psLineCoding->ui8Stop)
+ {
+ //
+ // One stop bit requested.
+ //
+ case USB_CDC_STOP_BITS_1:
+ {
+ ui32Config |= UART_CONFIG_STOP_ONE;
+ break;
+ }
+
+ //
+ // Two stop bits requested.
+ //
+ case USB_CDC_STOP_BITS_2:
+ {
+ ui32Config |= UART_CONFIG_STOP_TWO;
+ break;
+ }
+
+ //
+ // Other cases are either invalid values of ui8Stop or values that we
+ // cannot support so set 1 stop bit but return an error.
+ //
+ default:
+ {
+ ui32Config |= UART_CONFIG_STOP_ONE;
+ bRetcode = false;
+ break;
+ }
+ }
+
+ //
+ // Set the UART mode appropriately.
+ //
+ ROM_UARTConfigSetExpClk(USB_UART_BASE, ROM_SysCtlClockGet(),
+ psLineCoding->ui32Rate, ui32Config);
+
+ //
+ // Let the caller know if we had a problem or not.
+ //
+ return(bRetcode);
+}
+
+//*****************************************************************************
+//
+// Get the communication parameters in use on the UART.
+//
+//*****************************************************************************
+static void
+GetLineCoding(tLineCoding *psLineCoding)
+{
+ uint32_t ui32Config;
+ uint32_t ui32Rate;
+
+ //
+ // Get the current line coding set in the UART.
+ //
+ ROM_UARTConfigGetExpClk(USB_UART_BASE, ROM_SysCtlClockGet(), &ui32Rate,
+ &ui32Config);
+ psLineCoding->ui32Rate = ui32Rate;
+
+ //
+ // Translate the configuration word length field into the format expected
+ // by the host.
+ //
+ switch(ui32Config & UART_CONFIG_WLEN_MASK)
+ {
+ case UART_CONFIG_WLEN_8:
+ {
+ psLineCoding->ui8Databits = 8;
+ break;
+ }
+
+ case UART_CONFIG_WLEN_7:
+ {
+ psLineCoding->ui8Databits = 7;
+ break;
+ }
+
+ case UART_CONFIG_WLEN_6:
+ {
+ psLineCoding->ui8Databits = 6;
+ break;
+ }
+
+ case UART_CONFIG_WLEN_5:
+ {
+ psLineCoding->ui8Databits = 5;
+ break;
+ }
+ }
+
+ //
+ // Translate the configuration parity field into the format expected
+ // by the host.
+ //
+ switch(ui32Config & UART_CONFIG_PAR_MASK)
+ {
+ case UART_CONFIG_PAR_NONE:
+ {
+ psLineCoding->ui8Parity = USB_CDC_PARITY_NONE;
+ break;
+ }
+
+ case UART_CONFIG_PAR_ODD:
+ {
+ psLineCoding->ui8Parity = USB_CDC_PARITY_ODD;
+ break;
+ }
+
+ case UART_CONFIG_PAR_EVEN:
+ {
+ psLineCoding->ui8Parity = USB_CDC_PARITY_EVEN;
+ break;
+ }
+
+ case UART_CONFIG_PAR_ONE:
+ {
+ psLineCoding->ui8Parity = USB_CDC_PARITY_MARK;
+ break;
+ }
+
+ case UART_CONFIG_PAR_ZERO:
+ {
+ psLineCoding->ui8Parity = USB_CDC_PARITY_SPACE;
+ break;
+ }
+ }
+
+ //
+ // Translate the configuration stop bits field into the format expected
+ // by the host.
+ //
+ switch(ui32Config & UART_CONFIG_STOP_MASK)
+ {
+ case UART_CONFIG_STOP_ONE:
+ {
+ psLineCoding->ui8Stop = USB_CDC_STOP_BITS_1;
+ break;
+ }
+
+ case UART_CONFIG_STOP_TWO:
+ {
+ psLineCoding->ui8Stop = USB_CDC_STOP_BITS_2;
+ break;
+ }
+ }
+}
+
+//*****************************************************************************
+//
+// This function sets or clears a break condition on the redirected UART RX
+// line. A break is started when the function is called with \e bSend set to
+// \b true and persists until the function is called again with \e bSend set
+// to \b false.
+//
+//*****************************************************************************
+static void
+SendBreak(bool bSend)
+{
+ //
+ // Are we being asked to start or stop the break condition?
+ //
+ if(!bSend)
+ {
+ //
+ // Remove the break condition on the line.
+ //
+ ROM_UARTBreakCtl(USB_UART_BASE, false);
+ g_bSendingBreak = false;
+ }
+ else
+ {
+ //
+ // Start sending a break condition on the line.
+ //
+ ROM_UARTBreakCtl(USB_UART_BASE, true);
+ g_bSendingBreak = true;
+ }
+}
+
+//*****************************************************************************
+//
+// Handles CDC driver notifications related to control and setup of the device.
+//
+// \param pvCBData is the client-supplied callback pointer for this channel.
+// \param ui32Event identifies the event we are being notified about.
+// \param ui32MsgValue is an event-specific value.
+// \param pvMsgData is an event-specific pointer.
+//
+// This function is called by the CDC driver to perform control-related
+// operations on behalf of the USB host. These functions include setting
+// and querying the serial communication parameters, setting handshake line
+// states and sending break conditions.
+//
+// \return The return value is event-specific.
+//
+//*****************************************************************************
+uint32_t
+ControlHandler(void *pvCBData, uint32_t ui32Event,
+ uint32_t ui32MsgValue, void *pvMsgData)
+{
+ uint32_t ui32IntsOff;
+
+ //
+ // Which event are we being asked to process?
+ //
+ switch(ui32Event)
+ {
+ //
+ // We are connected to a host and communication is now possible.
+ //
+ case USB_EVENT_CONNECTED:
+ g_bUSBConfigured = true;
+
+ //
+ // Flush our buffers.
+ //
+ USBBufferFlush(&g_sTxBuffer);
+ USBBufferFlush(&g_sRxBuffer);
+
+ //
+ // Tell the main loop to update the display.
+ //
+ ui32IntsOff = ROM_IntMasterDisable();
+ g_pcStatus = "Connected";
+ g_ui32Flags |= COMMAND_STATUS_UPDATE;
+ if(!ui32IntsOff)
+ {
+ ROM_IntMasterEnable();
+ }
+ break;
+
+ //
+ // The host has disconnected.
+ //
+ case USB_EVENT_DISCONNECTED:
+ g_bUSBConfigured = false;
+ ui32IntsOff = ROM_IntMasterDisable();
+ g_pcStatus = "Disconnected";
+ g_ui32Flags |= COMMAND_STATUS_UPDATE;
+ if(!ui32IntsOff)
+ {
+ ROM_IntMasterEnable();
+ }
+ break;
+
+ //
+ // Return the current serial communication parameters.
+ //
+ case USBD_CDC_EVENT_GET_LINE_CODING:
+ GetLineCoding(pvMsgData);
+ break;
+
+ //
+ // Set the current serial communication parameters.
+ //
+ case USBD_CDC_EVENT_SET_LINE_CODING:
+ SetLineCoding(pvMsgData);
+ break;
+
+ //
+ // Set the current serial communication parameters.
+ //
+ case USBD_CDC_EVENT_SET_CONTROL_LINE_STATE:
+ SetControlLineState((uint16_t)ui32MsgValue);
+ break;
+
+ //
+ // Send a break condition on the serial line.
+ //
+ case USBD_CDC_EVENT_SEND_BREAK:
+ SendBreak(true);
+ break;
+
+ //
+ // Clear the break condition on the serial line.
+ //
+ case USBD_CDC_EVENT_CLEAR_BREAK:
+ SendBreak(false);
+ break;
+
+ //
+ // Ignore SUSPEND and RESUME for now.
+ //
+ case USB_EVENT_SUSPEND:
+ case USB_EVENT_RESUME:
+ break;
+
+ //
+ // We don't expect to receive any other events. Ignore any that show
+ // up in a release build or hang in a debug build.
+ //
+ default:
+#ifdef DEBUG
+ while(1);
+#else
+ break;
+#endif
+
+ }
+
+ return(0);
+}
+
+//*****************************************************************************
+//
+// Handles CDC driver notifications related to the transmit channel (data to
+// the USB host).
+//
+// \param ui32CBData is the client-supplied callback pointer for this channel.
+// \param ui32Event identifies the event we are being notified about.
+// \param ui32MsgValue is an event-specific value.
+// \param pvMsgData is an event-specific pointer.
+//
+// This function is called by the CDC driver to notify us of any events
+// related to operation of the transmit data channel (the IN channel carrying
+// data to the USB host).
+//
+// \return The return value is event-specific.
+//
+//*****************************************************************************
+uint32_t
+TxHandler(void *pvCBData, uint32_t ui32Event, uint32_t ui32MsgValue,
+ void *pvMsgData)
+{
+ //
+ // Which event have we been sent?
+ //
+ switch(ui32Event)
+ {
+ case USB_EVENT_TX_COMPLETE:
+ //
+ // Since we are using the USBBuffer, we don't need to do anything
+ // here.
+ //
+ break;
+
+ //
+ // We don't expect to receive any other events. Ignore any that show
+ // up in a release build or hang in a debug build.
+ //
+ default:
+#ifdef DEBUG
+ while(1);
+#else
+ break;
+#endif
+
+ }
+ return(0);
+}
+
+//*****************************************************************************
+//
+// Handles CDC driver notifications related to the receive channel (data from
+// the USB host).
+//
+// \param ui32CBData is the client-supplied callback data value for this channel.
+// \param ui32Event identifies the event we are being notified about.
+// \param ui32MsgValue is an event-specific value.
+// \param pvMsgData is an event-specific pointer.
+//
+// This function is called by the CDC driver to notify us of any events
+// related to operation of the receive data channel (the OUT channel carrying
+// data from the USB host).
+//
+// \return The return value is event-specific.
+//
+//*****************************************************************************
+uint32_t
+RxHandler(void *pvCBData, uint32_t ui32Event, uint32_t ui32MsgValue,
+ void *pvMsgData)
+{
+ uint32_t ui32Count;
+
+ //
+ // Which event are we being sent?
+ //
+ switch(ui32Event)
+ {
+ //
+ // A new packet has been received.
+ //
+ case USB_EVENT_RX_AVAILABLE:
+ {
+ //
+ // Feed some characters into the UART TX FIFO and enable the
+ // interrupt so we are told when there is more space.
+ //
+ USBUARTPrimeTransmit(USB_UART_BASE);
+ ROM_UARTIntEnable(USB_UART_BASE, UART_INT_TX);
+ break;
+ }
+
+ //
+ // We are being asked how much unprocessed data we have still to
+ // process. We return 0 if the UART is currently idle or 1 if it is
+ // in the process of transmitting something. The actual number of
+ // bytes in the UART FIFO is not important here, merely whether or
+ // not everything previously sent to us has been transmitted.
+ //
+ case USB_EVENT_DATA_REMAINING:
+ {
+ //
+ // Get the number of bytes in the buffer and add 1 if some data
+ // still has to clear the transmitter.
+ //
+ ui32Count = ROM_UARTBusy(USB_UART_BASE) ? 1 : 0;
+ return(ui32Count);
+ }
+
+ //
+ // We are being asked to provide a buffer into which the next packet
+ // can be read. We do not support this mode of receiving data so let
+ // the driver know by returning 0. The CDC driver should not be sending
+ // this message but this is included just for illustration and
+ // completeness.
+ //
+ case USB_EVENT_REQUEST_BUFFER:
+ {
+ return(0);
+ }
+
+ //
+ // We don't expect to receive any other events. Ignore any that show
+ // up in a release build or hang in a debug build.
+ //
+ default:
+#ifdef DEBUG
+ while(1);
+#else
+ break;
+#endif
+ }
+
+ return(0);
+}
+
+//*****************************************************************************
+//
+// This is the main application entry function.
+//
+//*****************************************************************************
+int
+main(void)
+{
+ uint32_t ui32TxCount;
+ uint32_t ui32RxCount;
+
+ //
+ // Enable lazy stacking for interrupt handlers. This allows floating-point
+ // instructions to be used within interrupt handlers, but at the expense of
+ // extra stack usage.
+ //
+ ROM_FPULazyStackingEnable();
+
+ //
+ // Set the clocking to run from the PLL at 50MHz
+ //
+ ROM_SysCtlClockSet(SYSCTL_SYSDIV_4 | SYSCTL_USE_PLL | SYSCTL_OSC_MAIN |
+ SYSCTL_XTAL_16MHZ);
+
+ //
+ // Configure the required pins for USB operation.
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOD);
+ ROM_GPIOPinTypeUSBAnalog(GPIO_PORTD_BASE, GPIO_PIN_5 | GPIO_PIN_4);
+
+ //
+ // Enable the GPIO port that is used for the on-board LED.
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOF);
+
+ //
+ // Enable the GPIO pins for the LED (PF2 & PF3).
+ //
+ ROM_GPIOPinTypeGPIOOutput(GPIO_PORTF_BASE, GPIO_PIN_3|GPIO_PIN_2);
+
+ //
+ // Not configured initially.
+ //
+ g_bUSBConfigured = false;
+
+ //
+ // Enable the UART that we will be redirecting.
+ //
+ ROM_SysCtlPeripheralEnable(USB_UART_PERIPH);
+
+ //
+ // Enable and configure the UART RX and TX pins
+ //
+ ROM_SysCtlPeripheralEnable(TX_GPIO_PERIPH);
+ ROM_SysCtlPeripheralEnable(RX_GPIO_PERIPH);
+ ROM_GPIOPinTypeUART(TX_GPIO_BASE, TX_GPIO_PIN);
+ ROM_GPIOPinTypeUART(RX_GPIO_BASE, RX_GPIO_PIN);
+
+ //
+ // TODO: Add code to configure handshake GPIOs if required.
+ //
+
+ //
+ // Set the default UART configuration.
+ //
+ ROM_UARTConfigSetExpClk(USB_UART_BASE, ROM_SysCtlClockGet(),
+ DEFAULT_BIT_RATE, DEFAULT_UART_CONFIG);
+ ROM_UARTFIFOLevelSet(USB_UART_BASE, UART_FIFO_TX4_8, UART_FIFO_RX4_8);
+
+ //
+ // Configure and enable UART interrupts.
+ //
+ ROM_UARTIntClear(USB_UART_BASE, ROM_UARTIntStatus(USB_UART_BASE, false));
+ ROM_UARTIntEnable(USB_UART_BASE, (UART_INT_OE | UART_INT_BE | UART_INT_PE |
+ UART_INT_FE | UART_INT_RT | UART_INT_TX | UART_INT_RX));
+
+ //
+ // Enable the system tick.
+ //
+ ROM_SysTickPeriodSet(ROM_SysCtlClockGet() / SYSTICKS_PER_SECOND);
+ ROM_SysTickIntEnable();
+ ROM_SysTickEnable();
+
+ //
+ // Initialize the transmit and receive buffers.
+ //
+ USBBufferInit(&g_sTxBuffer);
+ USBBufferInit(&g_sRxBuffer);
+
+ //
+ // Set the USB stack mode to Device mode with VBUS monitoring.
+ //
+ USBStackModeSet(0, eUSBModeForceDevice, 0);
+
+ //
+ // Pass our device information to the USB library and place the device
+ // on the bus.
+ //
+ USBDCDCInit(0, &g_sCDCDevice);
+
+ //
+ // Clear our local byte counters.
+ //
+ ui32RxCount = 0;
+ ui32TxCount = 0;
+
+ //
+ // Enable interrupts now that the application is ready to start.
+ //
+ ROM_IntEnable(USB_UART_INT);
+
+ //
+ // Main application loop.
+ //
+ while(1)
+ {
+ //
+ // Have we been asked to update the status display?
+ //
+ if(g_ui32Flags & COMMAND_STATUS_UPDATE)
+ {
+ //
+ // Clear the command flag
+ //
+ ROM_IntMasterDisable();
+ g_ui32Flags &= ~COMMAND_STATUS_UPDATE;
+ ROM_IntMasterEnable();
+ }
+
+ //
+ // Has there been any transmit traffic since we last checked?
+ //
+ if(ui32TxCount != g_ui32UARTTxCount)
+ {
+ //
+ // Turn on the Green LED.
+ //
+ GPIOPinWrite(GPIO_PORTF_BASE, GPIO_PIN_3, GPIO_PIN_3);
+
+ //
+ // Delay for a bit.
+ //
+ SysCtlDelay(ROM_SysCtlClockGet() / 3 / 20);
+
+ //
+ // Turn off the Green LED.
+ //
+ GPIOPinWrite(GPIO_PORTF_BASE, GPIO_PIN_3, 0);
+
+ //
+ // Take a snapshot of the latest transmit count.
+ //
+ ui32TxCount = g_ui32UARTTxCount;
+ }
+
+ //
+ // Has there been any receive traffic since we last checked?
+ //
+ if(ui32RxCount != g_ui32UARTRxCount)
+ {
+ //
+ // Turn on the Blue LED.
+ //
+ GPIOPinWrite(GPIO_PORTF_BASE, GPIO_PIN_2, GPIO_PIN_2);
+
+ //
+ // Delay for a bit.
+ //
+ SysCtlDelay(ROM_SysCtlClockGet() / 3 / 20);
+
+ //
+ // Turn off the Blue LED.
+ //
+ GPIOPinWrite(GPIO_PORTF_BASE, GPIO_PIN_2, 0);
+
+ //
+ // Take a snapshot of the latest receive count.
+ //
+ ui32RxCount = g_ui32UARTRxCount;
+
+ }
+ }
+}
diff --git a/boards/ek-tm4c123gxl/usb_dev_serial/usb_dev_serial.ewd b/boards/ek-tm4c123gxl/usb_dev_serial/usb_dev_serial.ewd new file mode 100644 index 0000000..7a32408 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_serial/usb_dev_serial.ewd @@ -0,0 +1,614 @@ +<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+ <fileVersion>1</fileVersion>
+ <configuration>
+ <name>Debug</name>
+ <toolchain>
+ <name>ARM</name>
+ </toolchain>
+ <debug>1</debug>
+ <settings>
+ <name>C-SPY</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>15</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CInput</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CEndian</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCVariant</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>MemOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MemFile</name>
+ <state>$TOOLKIT_DIR$\CONFIG\debugger\TexasInstruments\tm4c123gh6pm</state>
+ </option>
+ <option>
+ <name>RunToEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>RunToName</name>
+ <state>main</state>
+ </option>
+ <option>
+ <name>CExtraOptionsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCDDFArgumentProducer</name>
+ <state></state>
+ </option>
+ <option>
+ <name>OCDownloadSuppressDownload</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDownloadVerifyAll</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OCDynDriverList</name>
+ <state>LMIFTDI_ID</state>
+ </option>
+ <option>
+ <name>OCLastSavedByProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OCDownloadAttachToProgram</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FlashLoaders</name>
+ <state>,,,,(default),</state>
+ </option>
+ <option>
+ <name>UseFlashLoader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CLowLevel</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCBE8Slave</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ARMSIM_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCSimDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OCSimEnablePSP</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCSimPspOverrideConfig</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCSimPspConfigFile</name>
+ <state></state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ANGEL_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CCAngelHeartbeat</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CAngelCommunication</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CAngelCommBaud</name>
+ <version>0</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>CAngelCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ANGELTCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoAngelLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AngelLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>GDBSERVER_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>TCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>LogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCJTagBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>IARROM_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CRomLogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomLogFileEditB</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CRomCommunication</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRomCommBaud</name>
+ <version>0</version>
+ <state>7</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>JLINK_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>9</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>JLinkSpeed</name>
+ <state>32</state>
+ </option>
+ <option>
+ <name>CCJLinkDoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCJLinkHWResetDelay</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>JLinkInitialSpeed</name>
+ <state>32</state>
+ </option>
+ <option>
+ <name>CCDoJlinkMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCScanChainNonARMDevices</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkIRLength</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkCommRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkTCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>CCJLinkSpeedRadioV2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCUSBDevice</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchUndef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchSWI</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchData</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchPrefetch</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchIRQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchFIQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJLinkUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ <option>
+ <name>CCJLinkInterfaceRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCJLinkAttachSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCJLinkResetList</name>
+ <version>0</version>
+ <state>5</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>LMIFTDI_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>LmiftdiSpeed</name>
+ <state>500</state>
+ </option>
+ <option>
+ <name>CCLmiftdiDoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCLmiftdiLogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>MACRAIGOR_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>2</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>jtag</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>EmuSpeed</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>TCPIP</name>
+ <state>aaa.bbb.ccc.ddd</state>
+ </option>
+ <option>
+ <name>DoLogfile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>LogFile</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>DoEmuMultiTarget</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>EmuMultiTarget</name>
+ <state>0@ARM7TDMI</state>
+ </option>
+ <option>
+ <name>EmuHWReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CEmuCommBaud</name>
+ <version>0</version>
+ <state>4</state>
+ </option>
+ <option>
+ <name>CEmuCommPort</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>jtago</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>UnusedAddr</name>
+ <state>0x00800000</state>
+ </option>
+ <option>
+ <name>CCMacraigorHWResetDelay</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCJTagBreakpointRadio</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagDoUpdateBreakpoints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCJTagUpdateBreakpoints</name>
+ <state>main</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>RDI_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CRDIDriverDll</name>
+ <state>Browse to your RDI driver</state>
+ </option>
+ <option>
+ <name>CRDILogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CRDILogFileEdit</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>CCRDIHWReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchReset</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchUndef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchSWI</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchData</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchPrefetch</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchIRQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDICatchFIQ</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCRDIUseETM</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>THIRDPARTY_ID</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CThirdPartyDriverDll</name>
+ <state>Browse to your third-party driver</state>
+ </option>
+ <option>
+ <name>CThirdPartyLogFileCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CThirdPartyLogFileEditB</name>
+ <state>$TOOLKIT_DIR$\cspycomm.log</state>
+ </option>
+ <option>
+ <name>OCDriverInfo</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <debuggerPlugins>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\OSE\OseEpsilonPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+ <loadFlag>0</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Profiling\Profiling.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ <plugin>
+ <file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file>
+ <loadFlag>1</loadFlag>
+ </plugin>
+ </debuggerPlugins>
+ </configuration>
+</project>
diff --git a/boards/ek-tm4c123gxl/usb_dev_serial/usb_dev_serial.ewp b/boards/ek-tm4c123gxl/usb_dev_serial/usb_dev_serial.ewp new file mode 100644 index 0000000..d86effb --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_serial/usb_dev_serial.ewp @@ -0,0 +1,799 @@ +<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+ <fileVersion>1</fileVersion>
+ <configuration>
+ <name>Debug</name>
+ <toolchain>
+ <name>ARM</name>
+ </toolchain>
+ <debug>1</debug>
+ <settings>
+ <name>General</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <version>14</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>ExePath</name>
+ <state>ewarm\Exe</state>
+ </option>
+ <option>
+ <name>ObjPath</name>
+ <state>ewarm\Obj</state>
+ </option>
+ <option>
+ <name>ListPath</name>
+ <state>ewarm\List</state>
+ </option>
+ <option>
+ <name>Variant</name>
+ <version>19</version>
+ <state>39</state>
+ </option>
+ <option>
+ <name>GEndianMode</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>Input variant</name>
+ <version>1</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>Input description</name>
+ <state>No specifier n, no float nor long long, no scan set, no assignment suppressing.</state>
+ </option>
+ <option>
+ <name>Output variant</name>
+ <version>0</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>Output description</name>
+ <state>No specifier a, A, no specifier n, no float nor long long, no flags.</state>
+ </option>
+ <option>
+ <name>GOutputBinary</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FPU</name>
+ <version>2</version>
+ <state>5</state>
+ </option>
+ <option>
+ <name>OGCoreOrChip</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelect</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelectSlave</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>RTDescription</name>
+ <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+ </option>
+ <option>
+ <name>RTConfigPath</name>
+ <state>$TOOLKIT_DIR$\INC\DLib_Config_Normal.h</state>
+ </option>
+ <option>
+ <name>OGProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>OGLastSavedByProductVersion</name>
+ <state>5.11.0.50579</state>
+ </option>
+ <option>
+ <name>GeneralMisraRules</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>GeneralEnableMisra</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GeneralMisraVerbose</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGChipSelectEditMenu</name>
+ <state>TM4C123GH6PM TexasInstruments TM4C123GH6PM</state>
+ </option>
+ <option>
+ <name>GenLowLevelInterface</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GEndianModeBE</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OGBufferedTerminalOutput</name>
+ <state>0</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ICCARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>19</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CCDefines</name>
+ <state>ewarm</state>
+ <state>PART_TM4C123GH6PM</state>
+ <state>TARGET_IS_TM4C123_RB1</state>
+ <state>UART_BUFFERED</state>
+ </option>
+ <option>
+ <name>CCPreprocFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocComments</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMnemonics</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMessages</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssSource</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagSuppress</name>
+ <state>Pa050</state>
+ </option>
+ <option>
+ <name>CCDiagRemark</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCDiagWarning</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCDiagError</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCAllowList</name>
+ <version>1</version>
+ <state>1111111</state>
+ </option>
+ <option>
+ <name>CCDebugInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IEndianMode</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IExtraOptionsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCLangConformance</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCSignedPlainChar</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCRequirePrototypes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagWarnAreErr</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCCompilerRuntimeInfo</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OutputFile</name>
+ <state>$FILE_BNAME$.o</state>
+ </option>
+ <option>
+ <name>CCLangSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCLibConfigHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>PreInclude</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CompilerMisraRules</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>CompilerMisraOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCIncludePath2</name>
+ <state>$PROJ_DIR$\..</state>
+ <state>$PROJ_DIR$\..\..\..\..</state>
+ </option>
+ <option>
+ <name>CCStdIncCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCStdIncludePath</name>
+ <state>$TOOLKIT_DIR$\INC\</state>
+ </option>
+ <option>
+ <name>CCCodeSection</name>
+ <state>.text</state>
+ </option>
+ <option>
+ <name>IInterwork2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IProcessorMode2</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptLevel</name>
+ <state>3</state>
+ </option>
+ <option>
+ <name>CCOptStrategy</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptLevelSlave</name>
+ <state>3</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>AARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>7</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>AObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AEndian</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>ACaseSensitivity</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacroChars</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnEnable</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnWhat</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnOne</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AWarnRange1</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AWarnRange2</name>
+ <state></state>
+ </option>
+ <option>
+ <name>ADebug</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AltRegisterNames</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ADefines</name>
+ <state>ewarm</state>
+ </option>
+ <option>
+ <name>AList</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AListHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AListing</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>Includes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacDefs</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacExps</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacExec</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OnlyAssed</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MultiLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLengthCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLength</name>
+ <state>80</state>
+ </option>
+ <option>
+ <name>TabSpacing</name>
+ <state>8</state>
+ </option>
+ <option>
+ <name>AXRef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDefines</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefInternal</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDual</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AOutputFile</name>
+ <state>$FILE_BNAME$.o</state>
+ </option>
+ <option>
+ <name>AMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ALimitErrorsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ALimitErrorsEdit</name>
+ <state>100</state>
+ </option>
+ <option>
+ <name>AIgnoreStdInclude</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AStdIncludes</name>
+ <state>$TOOLKIT_DIR$\INC\</state>
+ </option>
+ <option>
+ <name>AUserIncludes</name>
+ <state>$PROJ_DIR$\..</state>
+ <state>$PROJ_DIR$\..\..\..\..</state>
+ </option>
+ <option>
+ <name>AExtraOptionsCheckV2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AExtraOptionsV2</name>
+ <state></state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>OBJCOPY</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OOCOutputFormat</name>
+ <version>1</version>
+ <state>2</state>
+ </option>
+ <option>
+ <name>OCOutputOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OOCOutputFile</name>
+ <state>usb_dev_serial.bin</state>
+ </option>
+ <option>
+ <name>OOCCommandLineProducer</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OOCObjCopyEnable</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>CUSTOM</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <extensions></extensions>
+ <cmdline></cmdline>
+ </data>
+ </settings>
+ <settings>
+ <name>BICOMP</name>
+ <archiveVersion>0</archiveVersion>
+ <data/>
+ </settings>
+ <settings>
+ <name>BUILDACTION</name>
+ <archiveVersion>1</archiveVersion>
+ <data>
+ <prebuild></prebuild>
+ <postbuild></postbuild>
+ </data>
+ </settings>
+ <settings>
+ <name>ILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>5</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>IlinkLibIOConfig</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>XLinkMisraHandler</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkInputFileSlave</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkOutputFile</name>
+ <state>usb_dev_serial.out</state>
+ </option>
+ <option>
+ <name>IlinkDebugInfoEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkKeepSymbols</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinaryFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinarySymbol</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinarySegment</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinaryAlign</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkDefines</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkConfigDefines</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkMapFile</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkLogFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogInitialization</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogModule</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogSection</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogVeneer</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkIcfOverride</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkIcfFile</name>
+ <state>$PROJ_DIR$\usb_dev_serial.icf</state>
+ </option>
+ <option>
+ <name>IlinkIcfFileSlave</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkSuppressDiags</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsRem</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsWarn</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsErr</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkWarningsAreErrors</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkUseExtraOptions</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkLowLevelInterfaceSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAutoLibEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAdditionalLibs</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkOverrideProgramEntryLabel</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabelSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabel</name>
+ <state>__iar_program_start</state>
+ </option>
+ <option>
+ <name>IlinkNXPLPCChecksum</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>DoFill</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FillerByte</name>
+ <state>0xFF</state>
+ </option>
+ <option>
+ <name>FillerStart</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>FillerEnd</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>CrcSize</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcAlign</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcAlgo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcPoly</name>
+ <state>0x11021</state>
+ </option>
+ <option>
+ <name>CrcCompl</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcBitOrder</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcInitialValue</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>DoCrc</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkBE8Slave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkBufferedTerminalOutput</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>IARCHIVE</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>IarchiveInputs</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IarchiveOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IarchiveOutput</name>
+ <state>###Unitialized###</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>BILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data/>
+ </settings>
+ </configuration>
+ <group>
+ <name>Libraries</name>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\driverlib\ewarm\Exe\driverlib.a</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\usblib\ewarm\Exe\usblib.a</name>
+ </file>
+ </group>
+ <group>
+ <name>Source</name>
+ <file>
+ <name>$PROJ_DIR$\startup_ewarm.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\utils\uartstdio.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\usb_dev_serial.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\usb_serial_structs.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\..\utils\ustdlib.c</name>
+ </file>
+ </group>
+</project>
diff --git a/boards/ek-tm4c123gxl/usb_dev_serial/usb_dev_serial.icf b/boards/ek-tm4c123gxl/usb_dev_serial/usb_dev_serial.icf new file mode 100644 index 0000000..23f7f32 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_serial/usb_dev_serial.icf @@ -0,0 +1,78 @@ +//*****************************************************************************
+//
+// usb_dev_serial.icf - Linker configuration file for usb_dev_serial.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+//
+// Define a memory region that covers the entire 4 GB addressible space of the
+// processor.
+//
+define memory mem with size = 4G;
+
+//
+// Define a region for the on-chip flash.
+//
+define region FLASH = mem:[from 0x00000000 to 0x0003ffff];
+
+//
+// Define a region for the on-chip SRAM.
+//
+define region SRAM = mem:[from 0x20000000 to 0x20007fff];
+
+//
+// Define a block for the heap. The size should be set to something other
+// than zero if things in the C library that require the heap are used.
+//
+define block HEAP with alignment = 8, size = 0x00000000 { };
+
+//
+// Indicate that the read/write values should be initialized by copying from
+// flash.
+//
+initialize by copy { readwrite };
+
+//
+// Indicate that the noinit values should be left alone. This includes the
+// stack, which if initialized will destroy the return address from the
+// initialization code, causing the processor to branch to zero and fault.
+//
+do not initialize { section .noinit };
+
+//
+// Place the interrupt vectors at the start of flash.
+//
+place at start of FLASH { readonly section .intvec };
+
+//
+// Place the remainder of the read-only items into flash.
+//
+place in FLASH { readonly };
+
+//
+// Place the RAM vector table at the start of SRAM.
+//
+place at start of SRAM { section VTABLE };
+
+//
+// Place all read/write items into SRAM.
+//
+place in SRAM { readwrite, block HEAP };
diff --git a/boards/ek-tm4c123gxl/usb_dev_serial/usb_dev_serial.ld b/boards/ek-tm4c123gxl/usb_dev_serial/usb_dev_serial.ld new file mode 100644 index 0000000..fc9d874 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_serial/usb_dev_serial.ld @@ -0,0 +1,57 @@ +/******************************************************************************
+ *
+ * usb_dev_serial.ld - Linker configuration file for usb_dev_serial.
+ *
+ * Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+ * Software License Agreement
+ *
+ * Texas Instruments (TI) is supplying this software for use solely and
+ * exclusively on TI's microcontroller products. The software is owned by
+ * TI and/or its suppliers, and is protected under applicable copyright
+ * laws. You may not combine this software with "viral" open-source
+ * software in order to form a larger program.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+ * NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+ * NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+ * CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+ * DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ * This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+ *
+ *****************************************************************************/
+
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x00040000
+ SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000
+}
+
+SECTIONS
+{
+ .text :
+ {
+ _text = .;
+ KEEP(*(.isr_vector))
+ *(.text*)
+ *(.rodata*)
+ _etext = .;
+ } > FLASH
+
+ .data : AT(ADDR(.text) + SIZEOF(.text))
+ {
+ _data = .;
+ *(vtable)
+ *(.data*)
+ _edata = .;
+ } > SRAM
+
+ .bss :
+ {
+ _bss = .;
+ *(.bss*)
+ *(COMMON)
+ _ebss = .;
+ } > SRAM
+}
diff --git a/boards/ek-tm4c123gxl/usb_dev_serial/usb_dev_serial.sct b/boards/ek-tm4c123gxl/usb_dev_serial/usb_dev_serial.sct new file mode 100644 index 0000000..e495e63 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_serial/usb_dev_serial.sct @@ -0,0 +1,47 @@ +;******************************************************************************
+;
+; usb_dev_serial.sct - Linker configuration file for usb_dev_serial.
+;
+; Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+; Software License Agreement
+;
+; Texas Instruments (TI) is supplying this software for use solely and
+; exclusively on TI's microcontroller products. The software is owned by
+; TI and/or its suppliers, and is protected under applicable copyright
+; laws. You may not combine this software with "viral" open-source
+; software in order to form a larger program.
+;
+; THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+; NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+; NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+; A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+; CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+; DAMAGES, FOR ANY REASON WHATSOEVER.
+;
+; This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+;
+;******************************************************************************
+
+LR_IROM 0x00000000 0x00040000
+{
+ ;
+ ; Specify the Execution Address of the code and the size.
+ ;
+ ER_IROM 0x00000000 0x00040000
+ {
+ *.o (RESET, +First)
+ * (InRoot$$Sections, +RO)
+ }
+
+ ;
+ ; Specify the Execution Address of the data area.
+ ;
+ RW_IRAM 0x20000000 0x00008000
+ {
+ ;
+ ; Uncomment the following line in order to use IntRegister().
+ ;
+ ;* (vtable, +First)
+ * (+RW, +ZI)
+ }
+}
diff --git a/boards/ek-tm4c123gxl/usb_dev_serial/usb_dev_serial.uvopt b/boards/ek-tm4c123gxl/usb_dev_serial/usb_dev_serial.uvopt new file mode 100644 index 0000000..3a620da --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_serial/usb_dev_serial.uvopt @@ -0,0 +1,345 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+ <SchemaVersion>1.0</SchemaVersion>
+
+ <Header>### uVision Project, (C) Keil Software</Header>
+
+ <Extensions>
+ <cExt>*.c</cExt>
+ <aExt>*.s*; *.src; *.a*</aExt>
+ <oExt>*.obj</oExt>
+ <lExt>*.lib</lExt>
+ <tExt>*.txt; *.h; *.inc</tExt>
+ <pExt>*.plm</pExt>
+ <CppX>*.cpp</CppX>
+ </Extensions>
+
+ <DaveTm>
+ <dwLowDateTime>0</dwLowDateTime>
+ <dwHighDateTime>0</dwHighDateTime>
+ </DaveTm>
+
+ <Target>
+ <TargetName>usb_dev_serial</TargetName>
+ <ToolsetNumber>0x4</ToolsetNumber>
+ <ToolsetName>ARM-ADS</ToolsetName>
+ <TargetOption>
+ <CLKADS>8000000</CLKADS>
+ <OPTTT>
+ <gFlags>1</gFlags>
+ <BeepAtEnd>1</BeepAtEnd>
+ <RunSim>1</RunSim>
+ <RunTarget>0</RunTarget>
+ </OPTTT>
+ <OPTHX>
+ <HexSelection>1</HexSelection>
+ <FlashByte>65535</FlashByte>
+ <HexRangeLowAddress>0</HexRangeLowAddress>
+ <HexRangeHighAddress>0</HexRangeHighAddress>
+ <HexOffset>0</HexOffset>
+ </OPTHX>
+ <OPTLEX>
+ <PageWidth>79</PageWidth>
+ <PageLength>66</PageLength>
+ <TabStop>8</TabStop>
+ <ListingPath>.\rvmdk\</ListingPath>
+ </OPTLEX>
+ <ListingPage>
+ <CreateCListing>1</CreateCListing>
+ <CreateAListing>1</CreateAListing>
+ <CreateLListing>1</CreateLListing>
+ <CreateIListing>0</CreateIListing>
+ <AsmCond>1</AsmCond>
+ <AsmSymb>1</AsmSymb>
+ <AsmXref>0</AsmXref>
+ <CCond>1</CCond>
+ <CCode>0</CCode>
+ <CListInc>0</CListInc>
+ <CSymb>0</CSymb>
+ <LinkerCodeListing>0</LinkerCodeListing>
+ </ListingPage>
+ <OPTXL>
+ <LMap>1</LMap>
+ <LComments>1</LComments>
+ <LGenerateSymbols>1</LGenerateSymbols>
+ <LLibSym>1</LLibSym>
+ <LLines>1</LLines>
+ <LLocSym>1</LLocSym>
+ <LPubSym>1</LPubSym>
+ <LXref>0</LXref>
+ <LExpSel>0</LExpSel>
+ </OPTXL>
+ <OPTFL>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <IsCurrentTarget>1</IsCurrentTarget>
+ </OPTFL>
+ <CpuCode>255</CpuCode>
+ <Books>
+ <Book>
+ <Number>0</Number>
+ <Title>Data Sheet</Title>
+ <Path>DATASHTS\Luminary\TM4C123GH6PM.PDF</Path>
+ </Book>
+ </Books>
+ <DllOpt>
+ <SimDllName>SARMCM3.DLL</SimDllName>
+ <SimDllArguments>-MPU</SimDllArguments>
+ <SimDlgDllName>DCM.DLL</SimDlgDllName>
+ <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+ <TargetDllName>SARMCM3.DLL</TargetDllName>
+ <TargetDllArguments>-MPU</TargetDllArguments>
+ <TargetDlgDllName>TCM.DLL</TargetDlgDllName>
+ <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+ </DllOpt>
+ <DebugOpt>
+ <uSim>0</uSim>
+ <uTrg>1</uTrg>
+ <sLdApp>1</sLdApp>
+ <sGomain>1</sGomain>
+ <sRbreak>1</sRbreak>
+ <sRwatch>1</sRwatch>
+ <sRmem>1</sRmem>
+ <sRfunc>1</sRfunc>
+ <sRbox>1</sRbox>
+ <tLdApp>1</tLdApp>
+ <tGomain>0</tGomain>
+ <tRbreak>1</tRbreak>
+ <tRwatch>1</tRwatch>
+ <tRmem>1</tRmem>
+ <tRfunc>0</tRfunc>
+ <tRbox>1</tRbox>
+ <sRunDeb>0</sRunDeb>
+ <sLrtime>0</sLrtime>
+ <nTsel>4</nTsel>
+ <sDll></sDll>
+ <sDllPa></sDllPa>
+ <sDlgDll></sDlgDll>
+ <sDlgPa></sDlgPa>
+ <sIfile></sIfile>
+ <tDll></tDll>
+ <tDllPa></tDllPa>
+ <tDlgDll></tDlgDll>
+ <tDlgPa></tDlgPa>
+ <tIfile></tIfile>
+ <pMon>BIN\lmidk-agdi.dll</pMon>
+ </DebugOpt>
+ <TargetDriverDllRegistry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>lmidk-agdi</Key>
+ <Name>-O4614 -S3 -FO29</Name>
+ </SetRegEntry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>DLGTARM</Key>
+ <Name></Name>
+ </SetRegEntry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>ARMDBGFLAGS</Key>
+ <Name></Name>
+ </SetRegEntry>
+ </TargetDriverDllRegistry>
+ <DebugFlag>
+ <trace>0</trace>
+ <periodic>1</periodic>
+ <aLwin>0</aLwin>
+ <aCover>0</aCover>
+ <aSer1>0</aSer1>
+ <aSer2>0</aSer2>
+ <aPa>0</aPa>
+ <viewmode>1</viewmode>
+ <vrSel>0</vrSel>
+ <aSym>0</aSym>
+ <aTbox>0</aTbox>
+ <AscS1>0</AscS1>
+ <AscS2>0</AscS2>
+ <AscS3>0</AscS3>
+ <aSer3>0</aSer3>
+ <eProf>0</eProf>
+ <aLa>0</aLa>
+ <aPa1>0</aPa1>
+ <AscS4>0</AscS4>
+ <aSer4>0</aSer4>
+ <StkLoc>0</StkLoc>
+ <TrcWin>0</TrcWin>
+ <newCpu>0</newCpu>
+ <uProt>0</uProt>
+ </DebugFlag>
+ <LintExecutable></LintExecutable>
+ <LintConfigFile></LintConfigFile>
+ </TargetOption>
+ </Target>
+
+ <Group>
+ <GroupName>Source</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>1</FileNumber>
+ <FileType>2</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\startup_rvmdk.S</PathWithFileName>
+ <FilenameWithoutPath>startup_rvmdk.S</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>2</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\utils\uartstdio.c</PathWithFileName>
+ <FilenameWithoutPath>uartstdio.c</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>3</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\usb_dev_serial.c</PathWithFileName>
+ <FilenameWithoutPath>usb_dev_serial.c</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>4</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\usb_serial_structs.c</PathWithFileName>
+ <FilenameWithoutPath>usb_serial_structs.c</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>5</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\utils\ustdlib.c</PathWithFileName>
+ <FilenameWithoutPath>ustdlib.c</FilenameWithoutPath>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>Libraries</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>6</FileNumber>
+ <FileType>4</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\driverlib\rvmdk\driverlib.lib</PathWithFileName>
+ <FilenameWithoutPath>driverlib.lib</FilenameWithoutPath>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>7</FileNumber>
+ <FileType>4</FileType>
+ <tvExp>0</tvExp>
+ <Focus>0</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>0</TopLine>
+ <CurrentLine>0</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>..\..\..\..\usblib\rvmdk\usblib.lib</PathWithFileName>
+ <FilenameWithoutPath>usblib.lib</FilenameWithoutPath>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>Documentation</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <File>
+ <GroupNumber>3</GroupNumber>
+ <FileNumber>8</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <Focus>1</Focus>
+ <ColumnNumber>0</ColumnNumber>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <TopLine>1</TopLine>
+ <CurrentLine>1</CurrentLine>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\readme.txt</PathWithFileName>
+ <FilenameWithoutPath>readme.txt</FilenameWithoutPath>
+ <WindowPosition>
+ <length>44</length>
+ <flags>0</flags>
+ <showCmd>1</showCmd>
+ <MinPosition>
+ <xPos>-1</xPos>
+ <yPos>-1</yPos>
+ </MinPosition>
+ <MaxPosition>
+ <xPos>-1</xPos>
+ <yPos>-1</yPos>
+ </MaxPosition>
+ <NormalPosition>
+ <Top>0</Top>
+ <Left>0</Left>
+ <Right>729</Right>
+ <Bottom>300</Bottom>
+ </NormalPosition>
+ </WindowPosition>
+ </File>
+ </Group>
+
+ <MDIGroups>
+ <Orientation>1</Orientation>
+ <ActiveMDIGroup>0</ActiveMDIGroup>
+ <MDIGroup>
+ <Size>100</Size>
+ <ActiveTab>0</ActiveTab>
+ <Documents>
+ <Doc>
+ <Name>.\readme.txt</Name>
+ <ColumnNumber>0</ColumnNumber>
+ <TopLine>1</TopLine>
+ <CurrentLine>1</CurrentLine>
+ </Doc>
+ </Documents>
+ </MDIGroup>
+ </MDIGroups>
+
+</ProjectOpt>
diff --git a/boards/ek-tm4c123gxl/usb_dev_serial/usb_dev_serial.uvproj b/boards/ek-tm4c123gxl/usb_dev_serial/usb_dev_serial.uvproj new file mode 100644 index 0000000..1a8a322 --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_serial/usb_dev_serial.uvproj @@ -0,0 +1,444 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+ <SchemaVersion>1.1</SchemaVersion>
+
+ <Header>### uVision Project, (C) Keil Software</Header>
+
+ <Targets>
+ <Target>
+ <TargetName>usb_dev_serial</TargetName>
+ <ToolsetNumber>0x4</ToolsetNumber>
+ <ToolsetName>ARM-ADS</ToolsetName>
+ <TargetOption>
+ <TargetCommonOption>
+ <Device>TM4C123GH6PM</Device>
+ <Vendor>Texas Instruments</Vendor>
+ <Cpu>IRAM(0x20000000-0x20007FFF) IROM(0-0x3FFFF) CLOCK(8000000) CPUTYPE("Cortex-M4") FPU2</Cpu>
+ <FlashUtilSpec></FlashUtilSpec>
+ <StartupFile>"STARTUP\Luminary\Startup.s" ("Luminary Startup Code")</StartupFile>
+ <FlashDriverDll>UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0LM4F_256 -FS00 -FL040000)</FlashDriverDll>
+ <DeviceId>5919</DeviceId>
+ <RegisterFile>LM4Fxxxx.H</RegisterFile>
+ <MemoryEnv></MemoryEnv>
+ <Cmp></Cmp>
+ <Asm></Asm>
+ <Linker></Linker>
+ <OHString></OHString>
+ <InfinionOptionDll></InfinionOptionDll>
+ <SLE66CMisc></SLE66CMisc>
+ <SLE66AMisc></SLE66AMisc>
+ <SLE66LinkerMisc></SLE66LinkerMisc>
+ <UseEnv>0</UseEnv>
+ <BinPath></BinPath>
+ <IncludePath></IncludePath>
+ <LibPath></LibPath>
+ <RegisterFilePath>Luminary\</RegisterFilePath>
+ <DBRegisterFilePath>Luminary\</DBRegisterFilePath>
+ <TargetStatus>
+ <Error>0</Error>
+ <ExitCodeStop>0</ExitCodeStop>
+ <ButtonStop>0</ButtonStop>
+ <NotGenerated>0</NotGenerated>
+ <InvalidFlash>1</InvalidFlash>
+ </TargetStatus>
+ <OutputDirectory>.\rvmdk\</OutputDirectory>
+ <OutputName>usb_dev_serial</OutputName>
+ <CreateExecutable>1</CreateExecutable>
+ <CreateLib>0</CreateLib>
+ <CreateHexFile>0</CreateHexFile>
+ <DebugInformation>1</DebugInformation>
+ <BrowseInformation>1</BrowseInformation>
+ <ListingPath>.\rvmdk\</ListingPath>
+ <HexFormatSelection>1</HexFormatSelection>
+ <Merge32K>0</Merge32K>
+ <CreateBatchFile>0</CreateBatchFile>
+ <BeforeCompile>
+ <RunUserProg1>0</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name></UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </BeforeCompile>
+ <BeforeMake>
+ <RunUserProg1>0</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name></UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </BeforeMake>
+ <AfterMake>
+ <RunUserProg1>1</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name>fromelf --bin --output .\rvmdk\usb_dev_serial.bin .\rvmdk\usb_dev_serial.axf</UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ </AfterMake>
+ <SelectedForBatchBuild>0</SelectedForBatchBuild>
+ <SVCSIdString></SVCSIdString>
+ </TargetCommonOption>
+ <CommonProperty>
+ <UseCPPCompiler>0</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <DllOption>
+ <SimDllName>SARMCM3.DLL</SimDllName>
+ <SimDllArguments>-MPU</SimDllArguments>
+ <SimDlgDll>DCM.DLL</SimDlgDll>
+ <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+ <TargetDllName>SARMCM3.DLL</TargetDllName>
+ <TargetDllArguments>-MPU</TargetDllArguments>
+ <TargetDlgDll>TCM.DLL</TargetDlgDll>
+ <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+ </DllOption>
+ <DebugOption>
+ <OPTHX>
+ <HexSelection>1</HexSelection>
+ <HexRangeLowAddress>0</HexRangeLowAddress>
+ <HexRangeHighAddress>0</HexRangeHighAddress>
+ <HexOffset>0</HexOffset>
+ <Oh166RecLen>16</Oh166RecLen>
+ </OPTHX>
+ <Simulator>
+ <UseSimulator>0</UseSimulator>
+ <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+ <RunToMain>1</RunToMain>
+ <RestoreBreakpoints>1</RestoreBreakpoints>
+ <RestoreWatchpoints>1</RestoreWatchpoints>
+ <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+ <RestoreFunctions>1</RestoreFunctions>
+ <RestoreToolbox>1</RestoreToolbox>
+ <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+ </Simulator>
+ <Target>
+ <UseTarget>1</UseTarget>
+ <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+ <RunToMain>0</RunToMain>
+ <RestoreBreakpoints>1</RestoreBreakpoints>
+ <RestoreWatchpoints>1</RestoreWatchpoints>
+ <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+ <RestoreFunctions>0</RestoreFunctions>
+ <RestoreToolbox>1</RestoreToolbox>
+ </Target>
+ <RunDebugAfterBuild>0</RunDebugAfterBuild>
+ <TargetSelection>4</TargetSelection>
+ <SimDlls>
+ <CpuDll></CpuDll>
+ <CpuDllArguments></CpuDllArguments>
+ <PeripheralDll></PeripheralDll>
+ <PeripheralDllArguments></PeripheralDllArguments>
+ <InitializationFile></InitializationFile>
+ </SimDlls>
+ <TargetDlls>
+ <CpuDll></CpuDll>
+ <CpuDllArguments></CpuDllArguments>
+ <PeripheralDll></PeripheralDll>
+ <PeripheralDllArguments></PeripheralDllArguments>
+ <InitializationFile></InitializationFile>
+ <Driver>BIN\lmidk-agdi.dll</Driver>
+ </TargetDlls>
+ </DebugOption>
+ <Utilities>
+ <Flash1>
+ <UseTargetDll>1</UseTargetDll>
+ <UseExternalTool>0</UseExternalTool>
+ <RunIndependent>0</RunIndependent>
+ <UpdateFlashBeforeDebugging>0</UpdateFlashBeforeDebugging>
+ <Capability>1</Capability>
+ <DriverSelection>4099</DriverSelection>
+ </Flash1>
+ <Flash2>BIN\lmidk-agdi.dll</Flash2>
+ <Flash3></Flash3>
+ <Flash4></Flash4>
+ </Utilities>
+ <TargetArmAds>
+ <ArmAdsMisc>
+ <GenerateListings>0</GenerateListings>
+ <asHll>1</asHll>
+ <asAsm>1</asAsm>
+ <asMacX>1</asMacX>
+ <asSyms>1</asSyms>
+ <asFals>1</asFals>
+ <asDbgD>1</asDbgD>
+ <asForm>1</asForm>
+ <ldLst>0</ldLst>
+ <ldmm>1</ldmm>
+ <ldXref>1</ldXref>
+ <BigEnd>0</BigEnd>
+ <AdsALst>0</AdsALst>
+ <AdsACrf>0</AdsACrf>
+ <AdsANop>0</AdsANop>
+ <AdsANot>0</AdsANot>
+ <AdsLLst>1</AdsLLst>
+ <AdsLmap>1</AdsLmap>
+ <AdsLcgr>1</AdsLcgr>
+ <AdsLsym>1</AdsLsym>
+ <AdsLszi>1</AdsLszi>
+ <AdsLtoi>1</AdsLtoi>
+ <AdsLsun>1</AdsLsun>
+ <AdsLven>1</AdsLven>
+ <AdsLsxf>1</AdsLsxf>
+ <RvctClst>0</RvctClst>
+ <GenPPlst>0</GenPPlst>
+ <AdsCpuType>"Cortex-M4"</AdsCpuType>
+ <RvctDeviceName></RvctDeviceName>
+ <mOS>0</mOS>
+ <uocRom>0</uocRom>
+ <uocRam>0</uocRam>
+ <hadIROM>1</hadIROM>
+ <hadIRAM>1</hadIRAM>
+ <hadXRAM>0</hadXRAM>
+ <uocXRam>0</uocXRam>
+ <RvdsVP>2</RvdsVP>
+ <hadIRAM2>0</hadIRAM2>
+ <hadIROM2>0</hadIROM2>
+ <StupSel>8</StupSel>
+ <useUlib>1</useUlib>
+ <EndSel>0</EndSel>
+ <uLtcg>0</uLtcg>
+ <RoSelD>3</RoSelD>
+ <RwSelD>3</RwSelD>
+ <CodeSel>0</CodeSel>
+ <OptFeed>0</OptFeed>
+ <NoZi1>0</NoZi1>
+ <NoZi2>0</NoZi2>
+ <NoZi3>0</NoZi3>
+ <NoZi4>0</NoZi4>
+ <NoZi5>0</NoZi5>
+ <Ro1Chk>0</Ro1Chk>
+ <Ro2Chk>0</Ro2Chk>
+ <Ro3Chk>0</Ro3Chk>
+ <Ir1Chk>1</Ir1Chk>
+ <Ir2Chk>0</Ir2Chk>
+ <Ra1Chk>0</Ra1Chk>
+ <Ra2Chk>0</Ra2Chk>
+ <Ra3Chk>0</Ra3Chk>
+ <Im1Chk>1</Im1Chk>
+ <Im2Chk>0</Im2Chk>
+ <OnChipMemories>
+ <Ocm1>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm1>
+ <Ocm2>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm2>
+ <Ocm3>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm3>
+ <Ocm4>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm4>
+ <Ocm5>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm5>
+ <Ocm6>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm6>
+ <IRAM>
+ <Type>0</Type>
+ <StartAddress>0x20000000</StartAddress>
+ <Size>0x8000</Size>
+ </IRAM>
+ <IROM>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x40000</Size>
+ </IROM>
+ <XRAM>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </XRAM>
+ <OCR_RVCT1>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT1>
+ <OCR_RVCT2>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT2>
+ <OCR_RVCT3>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT3>
+ <OCR_RVCT4>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x40000</Size>
+ </OCR_RVCT4>
+ <OCR_RVCT5>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT5>
+ <OCR_RVCT6>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT6>
+ <OCR_RVCT7>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT7>
+ <OCR_RVCT8>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT8>
+ <OCR_RVCT9>
+ <Type>0</Type>
+ <StartAddress>0x20000000</StartAddress>
+ <Size>0x8000</Size>
+ </OCR_RVCT9>
+ <OCR_RVCT10>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT10>
+ </OnChipMemories>
+ <RvctStartVector></RvctStartVector>
+ </ArmAdsMisc>
+ <Cads>
+ <interw>0</interw>
+ <Optim>3</Optim>
+ <oTime>0</oTime>
+ <SplitLS>0</SplitLS>
+ <OneElfS>1</OneElfS>
+ <Strict>0</Strict>
+ <EnumInt>0</EnumInt>
+ <PlainCh>0</PlainCh>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <wLevel>2</wLevel>
+ <uThumb>0</uThumb>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define>rvmdk PART_TM4C123GH6PM TARGET_IS_TM4C123_RB1 UART_BUFFERED</Define>
+ <Undefine></Undefine>
+ <IncludePath>..;..\..\..\..;</IncludePath>
+ </VariousControls>
+ </Cads>
+ <Aads>
+ <interw>1</interw>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <thumb>0</thumb>
+ <SplitLS>0</SplitLS>
+ <SwStkChk>0</SwStkChk>
+ <NoWarn>0</NoWarn>
+ <VariousControls>
+ <MiscControls></MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Aads>
+ <LDads>
+ <umfTarg>0</umfTarg>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <noStLib>0</noStLib>
+ <RepFail>1</RepFail>
+ <useFile>0</useFile>
+ <TextAddressRange>0x00000000</TextAddressRange>
+ <DataAddressRange>0x20000000</DataAddressRange>
+ <ScatterFile>usb_dev_serial.sct</ScatterFile>
+ <IncludeLibs></IncludeLibs>
+ <IncludeLibsPath></IncludeLibsPath>
+ <Misc>--entry Reset_Handler</Misc>
+ <LinkerInputFile></LinkerInputFile>
+ <DisabledWarnings></DisabledWarnings>
+ </LDads>
+ </TargetArmAds>
+ </TargetOption>
+ <Groups>
+ <Group>
+ <GroupName>Source</GroupName>
+ <Files>
+ <File>
+ <FileName>startup_rvmdk.S</FileName>
+ <FileType>2</FileType>
+ <FilePath>.\startup_rvmdk.S</FilePath>
+ </File>
+ <File>
+ <FileName>uartstdio.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>..\..\..\..\utils\uartstdio.c</FilePath>
+ </File>
+ <File>
+ <FileName>usb_dev_serial.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>.\usb_dev_serial.c</FilePath>
+ </File>
+ <File>
+ <FileName>usb_serial_structs.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>.\usb_serial_structs.c</FilePath>
+ </File>
+ <File>
+ <FileName>ustdlib.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>..\..\..\..\utils\ustdlib.c</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>Libraries</GroupName>
+ <Files>
+ <File>
+ <FileName>driverlib.lib</FileName>
+ <FileType>4</FileType>
+ <FilePath>..\..\..\..\driverlib\rvmdk\driverlib.lib</FilePath>
+ </File>
+ <File>
+ <FileName>usblib.lib</FileName>
+ <FileType>4</FileType>
+ <FilePath>..\..\..\..\usblib\rvmdk\usblib.lib</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>Documentation</GroupName>
+ <Files>
+ <File>
+ <FileName>readme.txt</FileName>
+ <FileType>5</FileType>
+ <FilePath>.\readme.txt</FilePath>
+ </File>
+ </Files>
+ </Group>
+ </Groups>
+ </Target>
+ </Targets>
+
+</Project>
diff --git a/boards/ek-tm4c123gxl/usb_dev_serial/usb_dev_serial_ccs.cmd b/boards/ek-tm4c123gxl/usb_dev_serial/usb_dev_serial_ccs.cmd new file mode 100644 index 0000000..48ce7eb --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_serial/usb_dev_serial_ccs.cmd @@ -0,0 +1,70 @@ +/******************************************************************************
+ *
+ * usb_dev_serial_ccs.cmd - CCS linker configuration file for usb_dev_serial.
+ *
+ * Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+ * Software License Agreement
+ *
+ * Texas Instruments (TI) is supplying this software for use solely and
+ * exclusively on TI's microcontroller products. The software is owned by
+ * TI and/or its suppliers, and is protected under applicable copyright
+ * laws. You may not combine this software with "viral" open-source
+ * software in order to form a larger program.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+ * NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+ * NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+ * CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+ * DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ * This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+ *
+ *****************************************************************************/
+
+--retain=g_pfnVectors
+
+/* The following command line options are set as part of the CCS project. */
+/* If you are building using the command line, or for some reason want to */
+/* define them here, you can uncomment and modify these lines as needed. */
+/* If you are using CCS for building, it is probably better to make any such */
+/* modifications in your CCS project and leave this file alone. */
+/* */
+/* --heap_size=0 */
+/* --stack_size=256 */
+/* --library=rtsv7M3_T_le_eabi.lib */
+
+/* The starting address of the application. Normally the interrupt vectors */
+/* must be located at the beginning of the application. */
+#define APP_BASE 0x00000000
+#define RAM_BASE 0x20000000
+
+/* System memory map */
+
+MEMORY
+{
+ /* Application stored in and executes from internal flash */
+ FLASH (RX) : origin = APP_BASE, length = 0x00040000
+ /* Application uses internal RAM for data */
+ SRAM (RWX) : origin = 0x20000000, length = 0x00008000
+}
+
+/* Section allocation in memory */
+
+SECTIONS
+{
+ .intvecs: > APP_BASE
+ .text : > FLASH
+ .const : > FLASH
+ .cinit : > FLASH
+ .pinit : > FLASH
+ .init_array : > FLASH
+
+ .vtable : > RAM_BASE
+ .data : > SRAM
+ .bss : > SRAM
+ .sysmem : > SRAM
+ .stack : > SRAM
+}
+
+__STACK_TOP = __stack + 1024;
diff --git a/boards/ek-tm4c123gxl/usb_dev_serial/usb_serial_structs.c b/boards/ek-tm4c123gxl/usb_dev_serial/usb_serial_structs.c new file mode 100644 index 0000000..bf0256f --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_serial/usb_serial_structs.c @@ -0,0 +1,215 @@ +//*****************************************************************************
+//
+// usb_serial_structs.c - Data structures defining this CDC USB device.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "inc/hw_types.h"
+#include "driverlib/usb.h"
+#include "usblib/usblib.h"
+#include "usblib/usbcdc.h"
+#include "usblib/usb-ids.h"
+#include "usblib/device/usbdevice.h"
+#include "usblib/device/usbdcdc.h"
+#include "usb_serial_structs.h"
+
+//*****************************************************************************
+//
+// The languages supported by this device.
+//
+//*****************************************************************************
+const uint8_t g_pui8LangDescriptor[] =
+{
+ 4,
+ USB_DTYPE_STRING,
+ USBShort(USB_LANG_EN_US)
+};
+
+//*****************************************************************************
+//
+// The manufacturer string.
+//
+//*****************************************************************************
+const uint8_t g_pui8ManufacturerString[] =
+{
+ (17 + 1) * 2,
+ USB_DTYPE_STRING,
+ 'T', 0, 'e', 0, 'x', 0, 'a', 0, 's', 0, ' ', 0, 'I', 0, 'n', 0, 's', 0,
+ 't', 0, 'r', 0, 'u', 0, 'm', 0, 'e', 0, 'n', 0, 't', 0, 's', 0,
+};
+
+//*****************************************************************************
+//
+// The product string.
+//
+//*****************************************************************************
+const uint8_t g_pui8ProductString[] =
+{
+ 2 + (16 * 2),
+ USB_DTYPE_STRING,
+ 'V', 0, 'i', 0, 'r', 0, 't', 0, 'u', 0, 'a', 0, 'l', 0, ' ', 0,
+ 'C', 0, 'O', 0, 'M', 0, ' ', 0, 'P', 0, 'o', 0, 'r', 0, 't', 0
+};
+
+//*****************************************************************************
+//
+// The serial number string.
+//
+//*****************************************************************************
+const uint8_t g_pui8SerialNumberString[] =
+{
+ 2 + (8 * 2),
+ USB_DTYPE_STRING,
+ '1', 0, '2', 0, '3', 0, '4', 0, '5', 0, '6', 0, '7', 0, '8', 0
+};
+
+//*****************************************************************************
+//
+// The control interface description string.
+//
+//*****************************************************************************
+const uint8_t g_pui8ControlInterfaceString[] =
+{
+ 2 + (21 * 2),
+ USB_DTYPE_STRING,
+ 'A', 0, 'C', 0, 'M', 0, ' ', 0, 'C', 0, 'o', 0, 'n', 0, 't', 0,
+ 'r', 0, 'o', 0, 'l', 0, ' ', 0, 'I', 0, 'n', 0, 't', 0, 'e', 0,
+ 'r', 0, 'f', 0, 'a', 0, 'c', 0, 'e', 0
+};
+
+//*****************************************************************************
+//
+// The configuration description string.
+//
+//*****************************************************************************
+const uint8_t g_pui8ConfigString[] =
+{
+ 2 + (26 * 2),
+ USB_DTYPE_STRING,
+ 'S', 0, 'e', 0, 'l', 0, 'f', 0, ' ', 0, 'P', 0, 'o', 0, 'w', 0,
+ 'e', 0, 'r', 0, 'e', 0, 'd', 0, ' ', 0, 'C', 0, 'o', 0, 'n', 0,
+ 'f', 0, 'i', 0, 'g', 0, 'u', 0, 'r', 0, 'a', 0, 't', 0, 'i', 0,
+ 'o', 0, 'n', 0
+};
+
+//*****************************************************************************
+//
+// The descriptor string table.
+//
+//*****************************************************************************
+const uint8_t * const g_ppui8StringDescriptors[] =
+{
+ g_pui8LangDescriptor,
+ g_pui8ManufacturerString,
+ g_pui8ProductString,
+ g_pui8SerialNumberString,
+ g_pui8ControlInterfaceString,
+ g_pui8ConfigString
+};
+
+#define NUM_STRING_DESCRIPTORS (sizeof(g_ppui8StringDescriptors) / \
+ sizeof(uint8_t *))
+
+//*****************************************************************************
+//
+// CDC device callback function prototypes.
+//
+//*****************************************************************************
+uint32_t RxHandler(void *pvCBData, uint32_t ui32Event,
+ uint32_t ui32MsgValue, void *pvMsgData);
+uint32_t TxHandler(void *pvCBData, uint32_t ui32Event,
+ uint32_t ui32MsgValue, void *pvMsgData);
+uint32_t ControlHandler(void *pvCBData, uint32_t ui32Event,
+ uint32_t ui32MsgValue, void *pvMsgData);
+
+//*****************************************************************************
+//
+// The CDC device initialization and customization structures. In this case,
+// we are using USBBuffers between the CDC device class driver and the
+// application code. The function pointers and callback data values are set
+// to insert a buffer in each of the data channels, transmit and receive.
+//
+// With the buffer in place, the CDC channel callback is set to the relevant
+// channel function and the callback data is set to point to the channel
+// instance data. The buffer, in turn, has its callback set to the application
+// function and the callback data set to our CDC instance structure.
+//
+//*****************************************************************************
+extern const tUSBBuffer g_sTxBuffer;
+extern const tUSBBuffer g_sRxBuffer;
+
+tUSBDCDCDevice g_sCDCDevice =
+{
+ USB_VID_TI_1CBE,
+ USB_PID_SERIAL,
+ 0,
+ USB_CONF_ATTR_SELF_PWR,
+ ControlHandler,
+ (void *)&g_sCDCDevice,
+ USBBufferEventCallback,
+ (void *)&g_sRxBuffer,
+ USBBufferEventCallback,
+ (void *)&g_sTxBuffer,
+ g_ppui8StringDescriptors,
+ NUM_STRING_DESCRIPTORS
+};
+
+//*****************************************************************************
+//
+// Receive buffer (from the USB perspective).
+//
+//*****************************************************************************
+uint8_t g_pui8USBRxBuffer[UART_BUFFER_SIZE];
+uint8_t g_pui8RxBufferWorkspace[USB_BUFFER_WORKSPACE_SIZE];
+const tUSBBuffer g_sRxBuffer =
+{
+ false, // This is a receive buffer.
+ RxHandler, // pfnCallback
+ (void *)&g_sCDCDevice, // Callback data is our device pointer.
+ USBDCDCPacketRead, // pfnTransfer
+ USBDCDCRxPacketAvailable, // pfnAvailable
+ (void *)&g_sCDCDevice, // pvHandle
+ g_pui8USBRxBuffer, // pui8Buffer
+ UART_BUFFER_SIZE, // ui32BufferSize
+ g_pui8RxBufferWorkspace // pvWorkspace
+};
+
+//*****************************************************************************
+//
+// Transmit buffer (from the USB perspective).
+//
+//*****************************************************************************
+uint8_t g_pui8USBTxBuffer[UART_BUFFER_SIZE];
+uint8_t g_pui8TxBufferWorkspace[USB_BUFFER_WORKSPACE_SIZE];
+const tUSBBuffer g_sTxBuffer =
+{
+ true, // This is a transmit buffer.
+ TxHandler, // pfnCallback
+ (void *)&g_sCDCDevice, // Callback data is our device pointer.
+ USBDCDCPacketWrite, // pfnTransfer
+ USBDCDCTxPacketAvailable, // pfnAvailable
+ (void *)&g_sCDCDevice, // pvHandle
+ g_pui8USBTxBuffer, // pui8Buffer
+ UART_BUFFER_SIZE, // ui32BufferSize
+ g_pui8TxBufferWorkspace // pvWorkspace
+};
diff --git a/boards/ek-tm4c123gxl/usb_dev_serial/usb_serial_structs.h b/boards/ek-tm4c123gxl/usb_dev_serial/usb_serial_structs.h new file mode 100644 index 0000000..46cebcc --- /dev/null +++ b/boards/ek-tm4c123gxl/usb_dev_serial/usb_serial_structs.h @@ -0,0 +1,49 @@ +//*****************************************************************************
+//
+// usb_serial_structs.h - Data structures defining this USB CDC device.
+//
+// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the EK-TM4C123GXL Firmware Package.
+//
+//*****************************************************************************
+
+#ifndef _USB_SERIAL_STRUCTS_H_
+#define _USB_SERIAL_STRUCTS_H_
+
+//*****************************************************************************
+//
+// The size of the transmit and receive buffers used for the redirected UART.
+// This number should be a power of 2 for best performance. 256 is chosen
+// pretty much at random though the buffer should be at least twice the size of
+// a maxmum-sized USB packet.
+//
+//*****************************************************************************
+#define UART_BUFFER_SIZE 256
+
+extern uint32_t RxHandler(void *pvCBData, uint32_t ui32Event,
+ uint32_t ui32MsgValue, void *pvMsgData);
+extern uint32_t TxHandler(void *pvi32CBData, uint32_t ui32Event,
+ uint32_t ui32MsgValue, void *pvMsgData);
+
+extern const tUSBBuffer g_sTxBuffer;
+extern const tUSBBuffer g_sRxBuffer;
+extern tUSBDCDCDevice g_sCDCDevice;
+extern uint8_t g_pui8USBTxBuffer[];
+extern uint8_t g_pui8USBRxBuffer[];
+
+#endif
|