Add more board models

1 files changed, 105 insertions, 0 deletions

diff --git a/boards/dk-tm4c129x/usb_stick_update/simple_fs.h b/boards/dk-tm4c129x/usb_stick_update/simple_fs.h
new file mode 100644
index 0000000..86fff46
--- /dev/null
+++ b/boards/dk-tm4c129x/usb_stick_update/simple_fs.h
@@ -0,0 +1,105 @@
+//*****************************************************************************

+//

+// simple_fs.h - Header for simple FAT file system support

+//

+// Copyright (c) 2013-2014 Texas Instruments Incorporated.  All rights reserved.

+// Software License Agreement

+// 

+// Texas Instruments (TI) is supplying this software for use solely and

+// exclusively on TI's microcontroller products. The software is owned by

+// TI and/or its suppliers, and is protected under applicable copyright

+// laws. You may not combine this software with "viral" open-source

+// software in order to form a larger program.

+// 

+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.

+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT

+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY

+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL

+// DAMAGES, FOR ANY REASON WHATSOEVER.

+// 

+// This is part of revision 2.1.0.12573 of the DK-TM4C129X Firmware Package.

+//

+//*****************************************************************************

+

+#ifndef __SIMPLE_FS_H__

+#define __SIMPLE_FS_H__

+

+//*****************************************************************************

+//

+// \addtogroup simple_fs_api

+// @{

+//

+//*****************************************************************************

+

+//*****************************************************************************

+//

+// Macro to read a single sector from a file that was opened with

+// SimpleFsOpen()

+//

+// This convenience macro maps to the function SimpleFsGetNextFileSector()

+// called with a parameter of 0.  It should be used to read successive

+// sectors from a file after the file has been opened with SimpleFsOpen().

+//

+// When a sector is read, it is loaded into the sector buffer that was passed

+// when SimpleFsInit() was called.

+//

+// A non-zero value will be returned to the caller as int32_t as successive

+// sectors are successfully read into the sector buffer.  At the end of the

+// file, or if there is any error, then a value of 0 is returned.

+//

+// Note that the a whole sector is always loaded, even if the end of

+// a file does not fill the last sector.  It is the responsibility of the

+// caller to track the file size and to deal with a partially full last

+// sector.

+//

+// \return Non-zero if a sector was read into the sector buffer, or

+// 0 if there are no more sectors or if any error occurred.

+//

+//*****************************************************************************

+#define SimpleFsReadFileSector() SimpleFsGetNextFileSector(0)

+

+//*****************************************************************************

+//

+// Read a single sector from the application-specific storage device into

+// the sector buffer.

+//

+// \param ui32Sector is the absolute sector number to read from the storage

+// device

+// \param pui8SectorBuf is a pointer to a 512 byte buffer where the sector

+// data should be written

+//

+// This function is used by the simple file system functions to read a sector

+// of data from a storage device.  It must be implemented as part of the

+// application specific code.  For example, it could be used to read sectors

+// from a USB mass storage device, or from an SD card, or any device that can

+// be used to store a FAT file system.  Note that the sector size is always

+// assumed to be 512 bytes.

+//

+// \return Zero value if a sector of data was successfully read from the

+// device and stored in the sector buffer, non-zero if not successful.

+//

+//*****************************************************************************

+//

+// This function to be supplied by the client

+//

+extern uint32_t SimpleFsReadMediaSector(uint_fast32_t ui32Sector,

+                                        uint8_t *pui8SectorBuf);

+

+//*****************************************************************************

+//

+// Close the Doxygen group.

+// @}

+//

+//*****************************************************************************

+

+//*****************************************************************************

+//

+// Functions to help with accessing the FAT file system on a storage device

+//

+//****************************************************************************

+extern uint32_t SimpleFsInit(uint8_t *pui8SectorBuf);

+extern uint32_t SimpleFsOpen(char *pcName83);

+extern uint32_t SimpleFsGetNextFileSector(uint_fast32_t ui32StartCluster);

+

+#endif // __SIMPLE_FS_H__