Add more board models

1 files changed, 49 insertions, 0 deletions

diff --git a/boards/dk-tm4c129x/usb_stick_update/readme.txt b/boards/dk-tm4c129x/usb_stick_update/readme.txt
new file mode 100644
index 0000000..8f0167b
--- /dev/null
+++ b/boards/dk-tm4c129x/usb_stick_update/readme.txt
@@ -0,0 +1,49 @@
+USB Memory Stick Updater

+

+This example application behaves the same way as a boot loader.  It resides

+at the beginning of flash, and will read a binary file from a USB memory

+stick and program it into another location in flash.  Once the user

+application has been programmed into flash, this program will always start

+the user application until requested to load a new application.

+

+When this application starts, if there is a user application already in

+flash (at \b APP_START_ADDRESS), then it will just run the user application.

+It will attempt to load a new application from a USB memory stick under

+the following conditions:

+

+- no user application is present at \b APP_START_ADDRESS

+- the user application has requested an update by transferring control

+to the updater

+- the user holds down the eval board push button when the board is reset

+

+When this application is attempting to perform an update, it will wait

+forever for a USB memory stick to be plugged in.  Once a USB memory stick

+is found, it will search the root directory for a specific file name, which

+is \e FIRMWARE.BIN by default.  This file must be a binary image of the

+program you want to load (the .bin file), linked to run from the correct

+address, at \b APP_START_ADDRESS.

+

+The USB memory stick must be formatted as a FAT16 or FAT32 file system

+(the normal case), and the binary file must be located in the root

+directory.  Other files can exist on the memory stick but they will be

+ignored.

+

+-------------------------------------------------------------------------------

+

+Copyright (c) 2013-2014 Texas Instruments Incorporated.  All rights reserved.

+Software License Agreement

+

+Texas Instruments (TI) is supplying this software for use solely and

+exclusively on TI's microcontroller products. The software is owned by

+TI and/or its suppliers, and is protected under applicable copyright

+laws. You may not combine this software with "viral" open-source

+software in order to form a larger program.

+

+THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.

+NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT

+NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

+A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY

+CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL

+DAMAGES, FOR ANY REASON WHATSOEVER.

+

+This is part of revision 2.1.0.12573 of the DK-TM4C129X Firmware Package.