diff options
| author | Yuval Adam <yuv.adm@gmail.com> | 2014-06-29 12:34:32 +0300 |
|---|---|---|
| committer | Yuval Adam <yuv.adm@gmail.com> | 2014-06-29 12:34:32 +0300 |
| commit | c3e4c9a25c2910d2d66d52215b3406b13d5b23d5 (patch) | |
| tree | added370d1e356901f8579f076e3263fb0464db7 /boards/dk-tm4c129x/usb_host_audio_in/readme.txt | |
| parent | 990090a4cc9070837d31e66b58d40f0c3d038741 (diff) | |
Add more board models
Diffstat (limited to 'boards/dk-tm4c129x/usb_host_audio_in/readme.txt')
| -rw-r--r-- | boards/dk-tm4c129x/usb_host_audio_in/readme.txt | 35 |
1 files changed, 35 insertions, 0 deletions
diff --git a/boards/dk-tm4c129x/usb_host_audio_in/readme.txt b/boards/dk-tm4c129x/usb_host_audio_in/readme.txt new file mode 100644 index 0000000..76c5886 --- /dev/null +++ b/boards/dk-tm4c129x/usb_host_audio_in/readme.txt @@ -0,0 +1,35 @@ +USB host audio example application using a USB audio device for input
+and PWM audio to the on board speaker for output.
+
+This example application demonstrates streaming audio from a USB audio
+device that supports recording an audio source at 48000 16 bit stereo.
+The application starts recording audio from the USB audio device when
+the "Record" button is pressed and stream it to the speaker on the board.
+Because some audio devices require more power, you may need to use an
+external 5 volt supply to provide enough power to the USB audio device.
+
+The application can be recompiled to run using and external USB phy to
+implement a high speed host using an external USB phy. To use the external
+phy the application must be built with \b USE_ULPI defined. This disables
+the internal phy and the connector on the DK-TM4C129X board and enables the
+connections to the external ULPI phy pins on the DK-TM4C129X board.
+
+-------------------------------------------------------------------------------
+
+Copyright (c) 2010-2014 Texas Instruments Incorporated. All rights reserved.
+Software License Agreement
+
+Texas Instruments (TI) is supplying this software for use solely and
+exclusively on TI's microcontroller products. The software is owned by
+TI and/or its suppliers, and is protected under applicable copyright
+laws. You may not combine this software with "viral" open-source
+software in order to form a larger program.
+
+THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+DAMAGES, FOR ANY REASON WHATSOEVER.
+
+This is part of revision 2.1.0.12573 of the DK-TM4C129X Firmware Package.
|