Add more board models

1 files changed, 46 insertions, 0 deletions

diff --git a/boards/dk-tm4c129x/tamper/readme.txt b/boards/dk-tm4c129x/tamper/readme.txt
new file mode 100644
index 0000000..65726d6
--- /dev/null
+++ b/boards/dk-tm4c129x/tamper/readme.txt
@@ -0,0 +1,46 @@
+Tamper

+

+An example to demonstrate the use of tamper function in Hibernate module.

+The user can ground any of these four GPIO pins(PM4, PM5, PM6, PM7 on

+J28 and J30 headers on the development kit) to manually

+triggle tamper events(s). The red indicators on the top of display should

+reflect on which pin has triggered a tamper event.

+The event along with the time stamp will be printed on the display.

+The user can put the system in hibernation by pressing the HIB button.

+The system should wake when the user either press RESET button,

+or ground any of the four pins to trigger tamper event(s). When the

+system boots up, the display should show whether the system woke

+from hibernation or booted up from POR in which case a description of

+howto instruction is printed on the display.

+The RTC clock is displayed on the bottom of the display, the clock starts

+from August 1st, 2013 at midnight when the app starts. The date and time

+can be changed by pressing the CLOCK button. The clock is update every

+second using hibernate calendar match interrupt. When the system

+is in hibernation, the clock update on the display is paused, it resumes

+once the system wakes up from hibernation.

+

+WARNING: XOSC failure is implemented in this example code, care must be

+taken to ensure that the XOSCn pin(Y3) is properly grounded in order to

+safely generate the external oscillator failure without damaging the

+external oscillator. XOSCFAIL can be triggered as a tamper event,

+as well as wakeup event from hibernation.

+

+-------------------------------------------------------------------------------

+

+Copyright (c) 2013-2014 Texas Instruments Incorporated.  All rights reserved.

+Software License Agreement

+

+Texas Instruments (TI) is supplying this software for use solely and

+exclusively on TI's microcontroller products. The software is owned by

+TI and/or its suppliers, and is protected under applicable copyright

+laws. You may not combine this software with "viral" open-source

+software in order to form a larger program.

+

+THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.

+NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT

+NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

+A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY

+CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL

+DAMAGES, FOR ANY REASON WHATSOEVER.

+

+This is part of revision 2.1.0.12573 of the DK-TM4C129X Firmware Package.