Add more board models

1 files changed, 137 insertions, 0 deletions

diff --git a/boards/dk-tm4c129x/grlib_driver_test/driver_config.h b/boards/dk-tm4c129x/grlib_driver_test/driver_config.h
new file mode 100644
index 0000000..10c8ced
--- /dev/null
+++ b/boards/dk-tm4c129x/grlib_driver_test/driver_config.h
@@ -0,0 +1,137 @@
+//*****************************************************************************

+//

+// driver_config.h - Modify this header file to tailor grlib_driver_test for

+//                   operation with your board and graphics display driver.

+//

+// Copyright (c) 2013-2014 Texas Instruments Incorporated.  All rights reserved.

+// Software License Agreement

+// 

+// Texas Instruments (TI) is supplying this software for use solely and

+// exclusively on TI's microcontroller products. The software is owned by

+// TI and/or its suppliers, and is protected under applicable copyright

+// laws. You may not combine this software with "viral" open-source

+// software in order to form a larger program.

+// 

+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.

+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT

+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY

+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL

+// DAMAGES, FOR ANY REASON WHATSOEVER.

+// 

+// This is part of revision 2.1.0.12573 of the DK-TM4C129X Firmware Package.

+//

+//*****************************************************************************

+

+#ifndef __DRIVER_CONFIG_H__

+#define __DRIVER_CONFIG_H__

+

+//*****************************************************************************

+//

+// TODO: Include the header file for your display driver here.  The default

+//       driver is for the QVGA display on the DK-TM4C129X board.  If your

+//       driver is dependent upon any other headers, include them here too.

+//       This may be the case if, for example, you are using a raster mode

+//       display and you have a header containing the timing parameters for

+//       the screen.

+//

+//*****************************************************************************

+#include "drivers/kentec320x240x16_ssd2119.h"

+

+//*****************************************************************************

+//

+// These two headers are required by the default implementation and can likely

+// be removed or reworked when you update the application to run on a custom

+// board.

+//

+//*****************************************************************************

+#include "drivers/frame.h"

+#include "drivers/pinout.h"

+

+//*****************************************************************************

+//

+// TODO: Set DRIVER_NAME to the name of the tDisplay structure exported by

+//       your display driver.

+//

+//*****************************************************************************

+#define DRIVER_NAME g_sKentec320x240x16_SSD2119

+

+//*****************************************************************************

+//

+// TODO: Set DRIVER_SYS_CLOCK_CONFIG to the value you require for your system.

+//       This is the first parameter that is passed to the SysCtlClockFreqSet

+//       function.

+//

+//*****************************************************************************

+#define DRIVER_SYS_CLOCK_CONFIG    (SYSCTL_XTAL_25MHZ |                       \

+                                    SYSCTL_OSC_MAIN |                         \

+                                    SYSCTL_USE_PLL |                          \

+                                    SYSCTL_CFG_VCO_480)

+

+//*****************************************************************************

+//

+// TODO: Set DRIVER_SYS_CLOCK_FREQUENCY to the value you require for your

+//       system.  This is the second parameter that is passed to the

+//       SysCtlClockFreqSet function and represents the desired system clock

+//       frequency.

+//

+//*****************************************************************************

+#define DRIVER_SYS_CLOCK_FREQUENCY 120000000

+

+//*****************************************************************************

+//

+// TODO: Define the color depth of the display driver's frame buffer.  If this

+//       value is 16 or greater, any operations involving the driver color

+//       palette will be compiled out of the test.  If it is 8 or lower,  make

+//       sure you also define the macro DRIVER_PALETTE_SET to allow the

+//       application to set colors in the driver's color lookup table.

+//

+//*****************************************************************************

+#define DRIVER_BPP 16

+

+#if (DRIVER_BPP < 16)

+//*****************************************************************************

+//

+// TODO: This macro must be defined if your display driver uses a palettized

+//       pixel format and a global color lookup table. Parameter pui32Color

+//       points to an array of 32-bit values each containing and RGB888 color

+//       definition.  ui32Index is the starting palette index in the driver's

+//       color table that will be changed and ui32NumEntries indicates both the

+//       number of colors in the array pointed to by pui32Color and the number

+//       of driver color palette locations that are to be written.

+//

+//*****************************************************************************

+#define DRIVER_PALETTE_SET(pui32Color, ui32Index, ui32NumEntries)            \

+    YourDriverPaletteSet((pui32Color), (ui32Index), (ui32NumEntries));

+

+#endif

+

+//*****************************************************************************

+//

+// TODO: This macro must be defined to perform all necessary hardware and

+//       software initialization for your display driver.  This will typically

+//       involve configuring the LCD controller into the relevant mode for

+//       the driver, setting peripheral pin muxing, configuring the EPI and

+//       SDRAM if your driver uses raster mode and requires a frame buffer in

+//       EPI-connected memory and setting a default color palette if needed.

+//

+//       The ui32SysClock parameter provides the configured system clock rate

+//       in Hz.

+//

+//*****************************************************************************

+#define DRIVER_INIT(ui32SysClock)                                            \

+{                                                                            \

+    PinoutSet();                                                             \

+    Kentec320x240x16_SSD2119Init(ui32SysClock);                              \

+}

+

+//*****************************************************************************

+//

+// We allow the testcase to be built such that it issues no drawing orders

+// other than those requested via the command line.  This can be helpful

+// when bringing up a new display driver.

+//

+//*****************************************************************************

+//#define NO_GRLIB_CALLS_ON_STARTUP

+

+#endif