Add more board models

1 files changed, 282 insertions, 0 deletions

diff --git a/boards/dk-tm4c129x/drivers/pinout.c b/boards/dk-tm4c129x/drivers/pinout.c
new file mode 100644
index 0000000..12a4ddc
--- /dev/null
+++ b/boards/dk-tm4c129x/drivers/pinout.c
@@ -0,0 +1,282 @@
+//*****************************************************************************

+//

+// pinout.c - Function to configure the device pins on the DK-TM4C129X.

+//

+// Copyright (c) 2013-2014 Texas Instruments Incorporated.  All rights reserved.

+// Software License Agreement

+// 

+// Texas Instruments (TI) is supplying this software for use solely and

+// exclusively on TI's microcontroller products. The software is owned by

+// TI and/or its suppliers, and is protected under applicable copyright

+// laws. You may not combine this software with "viral" open-source

+// software in order to form a larger program.

+// 

+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.

+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT

+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY

+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL

+// DAMAGES, FOR ANY REASON WHATSOEVER.

+// 

+// This is part of revision 2.1.0.12573 of the DK-TM4C129X Firmware Package.

+//

+//*****************************************************************************

+

+#include <stdbool.h>

+#include <stdint.h>

+#include "inc/hw_gpio.h"

+#include "inc/hw_memmap.h"

+#include "inc/hw_types.h"

+#include "driverlib/gpio.h"

+#include "driverlib/pin_map.h"

+#include "driverlib/rom.h"

+#include "driverlib/sysctl.h"

+#include "drivers/pinout.h"

+

+//*****************************************************************************

+//

+//! \addtogroup pinout_api

+//! @{

+//

+//*****************************************************************************

+

+//*****************************************************************************

+//

+//! Configures the device pins for the standard usages on the DK-TM4C129X.

+//!

+//! This function enables the GPIO modules and configures the device pins for

+//! the default, standard usages on the DK-TM4C129X.  Applications that require

+//! alternate configurations of the device pins can either not call this

+//! function and take full responsibility for configuring all the device pins,

+//! or can reconfigure the required device pins after calling this function.

+//!

+//! \return None.

+//

+//*****************************************************************************

+void

+PinoutSet(void)

+{

+    //

+    // Enable all the GPIO peripherals.

+    //

+    ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOA);

+    ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOB);

+    ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOC);

+    ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOD);

+    ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOE);

+    ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOF);

+    ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOG);

+    ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOH);

+    ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOJ);

+    ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOK);

+    ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOL);

+    ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOM);

+    ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPION);

+    ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOP);

+    ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOQ);

+    ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOR);

+    ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOS);

+    ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOT);

+

+    //

+    // PA0-1 are used for UART0.

+    //

+    ROM_GPIOPinConfigure(GPIO_PA0_U0RX);

+    ROM_GPIOPinConfigure(GPIO_PA1_U0TX);

+    ROM_GPIOPinTypeUART(GPIO_PORTA_BASE, GPIO_PIN_0 | GPIO_PIN_1);

+

+    //

+    // PA2-5 are used for SSI0 to the second booster pack.

+    //

+    ROM_GPIOPinConfigure(GPIO_PA2_SSI0CLK);

+    ROM_GPIOPinConfigure(GPIO_PA3_SSI0FSS);

+    ROM_GPIOPinConfigure(GPIO_PA4_SSI0XDAT0);

+    ROM_GPIOPinConfigure(GPIO_PA5_SSI0XDAT1);

+

+    //

+    // PB0-1/PD6-7/PL6-7 are used for USB.

+    //

+    HWREG(GPIO_PORTD_BASE + GPIO_O_LOCK) = GPIO_LOCK_KEY;

+    HWREG(GPIO_PORTD_BASE + GPIO_O_CR) = 0xff;

+    ROM_GPIOPinConfigure(GPIO_PD6_USB0EPEN);

+    ROM_GPIOPinConfigure(GPIO_PD7_USB0PFLT);

+    ROM_GPIOPinTypeUSBAnalog(GPIO_PORTB_BASE, GPIO_PIN_0 | GPIO_PIN_1);

+    ROM_GPIOPinTypeUSBDigital(GPIO_PORTD_BASE, GPIO_PIN_6 | GPIO_PIN_7);

+    ROM_GPIOPinTypeUSBAnalog(GPIO_PORTL_BASE, GPIO_PIN_6 | GPIO_PIN_7);

+

+    //

+    // PB2/PD4 are used for the speaker output.

+    //

+    ROM_GPIOPinConfigure(GPIO_PB2_T5CCP0);

+    ROM_GPIOPinTypeTimer(GPIO_PORTB_BASE, GPIO_PIN_2);

+    ROM_GPIOPinTypeGPIOOutput(GPIO_PORTD_BASE, GPIO_PIN_4);

+    ROM_GPIOPinWrite(GPIO_PORTD_BASE, GPIO_PIN_4, 0);

+

+    //

+    // PB6-7 are used for I2C to the TMP100 and the EM connector.

+    //

+    ROM_GPIOPinConfigure(GPIO_PB6_I2C6SCL);

+    ROM_GPIOPinConfigure(GPIO_PB7_I2C6SDA);

+    ROM_GPIOPinTypeI2CSCL(GPIO_PORTB_BASE, GPIO_PIN_6);

+    ROM_GPIOPinTypeI2C(GPIO_PORTB_BASE, GPIO_PIN_7);

+

+    //

+    // PE5/PN3/PP1 are used for the push buttons.

+    //

+    ROM_GPIOPinTypeGPIOInput(GPIO_PORTE_BASE, GPIO_PIN_5);

+    ROM_GPIOPinTypeGPIOInput(GPIO_PORTN_BASE, GPIO_PIN_3);

+    ROM_GPIOPinTypeGPIOInput(GPIO_PORTP_BASE, GPIO_PIN_1);

+

+    //

+    // PE7/PP7/PT2-3 are used for the touch screen.

+    //

+    HWREG(GPIO_PORTE_BASE + GPIO_O_LOCK) = GPIO_LOCK_KEY;

+    HWREG(GPIO_PORTE_BASE + GPIO_O_CR) = 0xff;

+    ROM_GPIOPinTypeGPIOInput(GPIO_PORTE_BASE, GPIO_PIN_7);

+    ROM_GPIOPinTypeGPIOInput(GPIO_PORTP_BASE, GPIO_PIN_7);

+    ROM_GPIOPinTypeGPIOInput(GPIO_PORTT_BASE, GPIO_PIN_2 | GPIO_PIN_3);

+    ROM_GPIOPinTypeGPIOOutput(GPIO_PORTE_BASE, GPIO_PIN_7);

+    ROM_GPIOPinWrite(GPIO_PORTE_BASE, GPIO_PIN_7, 0);

+    ROM_GPIOPinTypeGPIOOutput(GPIO_PORTP_BASE, GPIO_PIN_7);

+    ROM_GPIOPinWrite(GPIO_PORTP_BASE, GPIO_PIN_7, 0);

+    ROM_GPIOPinTypeGPIOOutput(GPIO_PORTT_BASE, GPIO_PIN_2 | GPIO_PIN_3);

+    ROM_GPIOPinWrite(GPIO_PORTT_BASE, GPIO_PIN_2 | GPIO_PIN_3, 0);

+

+    //

+    // PF0/PF4-5/PH4/PQ0-2 are used for the SPI flash (on-board and SD card).

+    // PH4 selects the SD card and PQ1 selects the on-board SPI flash.

+    //

+    ROM_GPIOPinConfigure(GPIO_PF0_SSI3XDAT1);

+    ROM_GPIOPinConfigure(GPIO_PF4_SSI3XDAT2);

+    ROM_GPIOPinConfigure(GPIO_PF5_SSI3XDAT3);

+    ROM_GPIOPinConfigure(GPIO_PQ0_SSI3CLK);

+    ROM_GPIOPinConfigure(GPIO_PQ2_SSI3XDAT0);

+    ROM_GPIOPinTypeSSI(GPIO_PORTF_BASE, GPIO_PIN_0 | GPIO_PIN_4 | GPIO_PIN_5);

+    ROM_GPIOPinTypeGPIOOutput(GPIO_PORTH_BASE, GPIO_PIN_4);

+    ROM_GPIOPinWrite(GPIO_PORTH_BASE, GPIO_PIN_4, GPIO_PIN_4);

+    ROM_GPIOPinTypeSSI(GPIO_PORTQ_BASE, GPIO_PIN_0 | GPIO_PIN_2);

+    ROM_GPIOPinTypeGPIOOutput(GPIO_PORTQ_BASE, GPIO_PIN_1);

+    ROM_GPIOPinWrite(GPIO_PORTQ_BASE, GPIO_PIN_1, GPIO_PIN_1);

+

+    //

+    // PF1/PK4/PK6 are used for Ethernet LEDs.

+    //

+    ROM_GPIOPinConfigure(GPIO_PF1_EN0LED2);

+    ROM_GPIOPinConfigure(GPIO_PK4_EN0LED0);

+    ROM_GPIOPinConfigure(GPIO_PK6_EN0LED1);

+    GPIOPinTypeEthernetLED(GPIO_PORTF_BASE, GPIO_PIN_1);

+    GPIOPinTypeEthernetLED(GPIO_PORTK_BASE, GPIO_PIN_4);

+    GPIOPinTypeEthernetLED(GPIO_PORTK_BASE, GPIO_PIN_6);

+

+    //

+    // PF6-7/PJ6/PS4-5/PR0-7 are used for the LCD.

+    //

+    ROM_GPIOPinConfigure(GPIO_PF7_LCDDATA02);

+    ROM_GPIOPinConfigure(GPIO_PJ6_LCDAC);

+    ROM_GPIOPinConfigure(GPIO_PR0_LCDCP);

+    ROM_GPIOPinConfigure(GPIO_PR1_LCDFP);

+    ROM_GPIOPinConfigure(GPIO_PR2_LCDLP);

+    ROM_GPIOPinConfigure(GPIO_PR3_LCDDATA03);

+    ROM_GPIOPinConfigure(GPIO_PR4_LCDDATA00);

+    ROM_GPIOPinConfigure(GPIO_PR5_LCDDATA01);

+    ROM_GPIOPinConfigure(GPIO_PR6_LCDDATA04);

+    ROM_GPIOPinConfigure(GPIO_PR7_LCDDATA05);

+    ROM_GPIOPinConfigure(GPIO_PS4_LCDDATA06);

+    ROM_GPIOPinConfigure(GPIO_PS5_LCDDATA07);

+    ROM_GPIOPinTypeGPIOOutput(GPIO_PORTF_BASE, GPIO_PIN_6);

+    ROM_GPIOPinWrite(GPIO_PORTF_BASE, GPIO_PIN_6, GPIO_PIN_6);

+    GPIOPinTypeLCD(GPIO_PORTF_BASE, GPIO_PIN_7);

+    GPIOPinTypeLCD(GPIO_PORTJ_BASE, GPIO_PIN_6);

+    GPIOPinTypeLCD(GPIO_PORTR_BASE,

+                       (GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_3 |

+                        GPIO_PIN_4 | GPIO_PIN_5 | GPIO_PIN_6 | GPIO_PIN_7));

+    GPIOPinTypeLCD(GPIO_PORTS_BASE, GPIO_PIN_4 | GPIO_PIN_5);

+

+    //

+    // PQ7 is used for the user LED.

+    //

+    ROM_GPIOPinTypeGPIOOutput(GPIO_PORTQ_BASE, GPIO_PIN_7);

+    ROM_GPIOPinWrite(GPIO_PORTQ_BASE, GPIO_PIN_7, 0);

+}

+

+//*****************************************************************************

+//

+//! Configures the USB pins for ULPI connection to an external USB PHY.

+//!

+//! This function configures the USB ULPI pins to connect the DK-TM4C129X board

+//! to an external USB PHY in ULPI mode.  This allows the external PHY to act

+//! as an external high-speed phy for the DK-TM4C129X.  This function must be

+//! called after the call to PinoutSet() to properly configure the pins.

+//!

+//! \return None.

+//

+//*****************************************************************************

+#ifdef USE_ULPI

+void

+USBULPIPinoutSet(void)

+{

+    //

+    // Enable all the peripherals that are used by the ULPI interface.

+    //

+    ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOB);

+    ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOL);

+    ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOM);

+    ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOP);

+

+    //

+    // ULPI Port B pins.

+    //

+    ROM_GPIOPinConfigure(GPIO_PB2_USB0STP);

+    ROM_GPIOPinConfigure(GPIO_PB3_USB0CLK);

+    ROM_GPIOPinTypeUSBDigital(GPIO_PORTB_BASE, GPIO_PIN_2 | GPIO_PIN_3);

+    GPIOPadConfigSet(GPIO_PORTB_BASE, GPIO_PIN_2 | GPIO_PIN_3,

+                     GPIO_STRENGTH_12MA, GPIO_PIN_TYPE_STD);

+

+    //

+    // ULPI Port P pins.

+    //

+    ROM_GPIOPinConfigure(GPIO_PP2_USB0NXT);

+    ROM_GPIOPinConfigure(GPIO_PP3_USB0DIR);

+    ROM_GPIOPinConfigure(GPIO_PP4_USB0D7);

+    ROM_GPIOPinConfigure(GPIO_PP5_USB0D6);

+    ROM_GPIOPinTypeUSBDigital(GPIO_PORTP_BASE, GPIO_PIN_2 | GPIO_PIN_3 |

+                                               GPIO_PIN_4 | GPIO_PIN_5);

+    GPIOPadConfigSet(GPIO_PORTP_BASE,

+                     GPIO_PIN_2 | GPIO_PIN_3 | GPIO_PIN_4 | GPIO_PIN_5,

+                     GPIO_STRENGTH_12MA, GPIO_PIN_TYPE_STD);

+

+    //

+    // ULPI Port L pins.

+    //

+    ROM_GPIOPinConfigure(GPIO_PL5_USB0D5);

+    ROM_GPIOPinConfigure(GPIO_PL4_USB0D4);

+    ROM_GPIOPinConfigure(GPIO_PL3_USB0D3);

+    ROM_GPIOPinConfigure(GPIO_PL2_USB0D2);

+    ROM_GPIOPinConfigure(GPIO_PL1_USB0D1);

+    ROM_GPIOPinConfigure(GPIO_PL0_USB0D0);

+    ROM_GPIOPinTypeUSBDigital(GPIO_PORTL_BASE, GPIO_PIN_0 | GPIO_PIN_1 |

+                                               GPIO_PIN_2 | GPIO_PIN_3 |

+                                               GPIO_PIN_4 | GPIO_PIN_5);

+    GPIOPadConfigSet(GPIO_PORTL_BASE,

+                     GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_3 |

+                     GPIO_PIN_4 | GPIO_PIN_5,

+                     GPIO_STRENGTH_12MA, GPIO_PIN_TYPE_STD);

+    //

+    // ULPI Port M pins used to control the external USB oscillator and the

+    // external USB phy on the DK-TM4C129X-DPHY board.

+    //

+    // PM1 - Enables the USB oscillator on the DK-TM4C129X-DPHY board.

+    // PM3 - Enables the USB phy on the DK-TM4C129X-DPHY board.

+    //

+    ROM_GPIOPinTypeGPIOOutput(GPIO_PORTM_BASE, GPIO_PIN_1 | GPIO_PIN_3);

+    ROM_GPIOPinWrite(GPIO_PORTM_BASE, GPIO_PIN_1 | GPIO_PIN_3, GPIO_PIN_1 |

+                                                               GPIO_PIN_3);

+}

+#endif

+

+//*****************************************************************************

+//

+// Close the Doxygen group.

+//! @}

+//

+//*****************************************************************************