diff options
| author | Yuval Adam <yuv.adm@gmail.com> | 2014-06-29 12:34:32 +0300 |
|---|---|---|
| committer | Yuval Adam <yuv.adm@gmail.com> | 2014-06-29 12:34:32 +0300 |
| commit | c3e4c9a25c2910d2d66d52215b3406b13d5b23d5 (patch) | |
| tree | added370d1e356901f8579f076e3263fb0464db7 /boards/dk-tm4c129x/aes_ecb_decrypt/aes_ecb_decrypt.c | |
| parent | 990090a4cc9070837d31e66b58d40f0c3d038741 (diff) | |
Add more board models
Diffstat (limited to 'boards/dk-tm4c129x/aes_ecb_decrypt/aes_ecb_decrypt.c')
| -rw-r--r-- | boards/dk-tm4c129x/aes_ecb_decrypt/aes_ecb_decrypt.c | 698 |
1 files changed, 698 insertions, 0 deletions
diff --git a/boards/dk-tm4c129x/aes_ecb_decrypt/aes_ecb_decrypt.c b/boards/dk-tm4c129x/aes_ecb_decrypt/aes_ecb_decrypt.c new file mode 100644 index 0000000..af003f1 --- /dev/null +++ b/boards/dk-tm4c129x/aes_ecb_decrypt/aes_ecb_decrypt.c @@ -0,0 +1,698 @@ +//*****************************************************************************
+//
+// aes_ecb_decrypt.c - Simple AES128 and AES256 ECB decryption demo.
+//
+// Copyright (c) 2013-2014 Texas Instruments Incorporated. All rights reserved.
+// Software License Agreement
+//
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+//
+// This is part of revision 2.1.0.12573 of the DK-TM4C129X Firmware Package.
+//
+//*****************************************************************************
+
+#include <stdbool.h>
+#include <stdint.h>
+#include "inc/hw_aes.h"
+#include "inc/hw_ints.h"
+#include "inc/hw_memmap.h"
+#include "driverlib/aes.h"
+#include "driverlib/debug.h"
+#include "driverlib/fpu.h"
+#include "driverlib/gpio.h"
+#include "driverlib/interrupt.h"
+#include "driverlib/pin_map.h"
+#include "driverlib/rom.h"
+#include "driverlib/rom_map.h"
+#include "driverlib/sysctl.h"
+#include "driverlib/uart.h"
+#include "driverlib/udma.h"
+#include "grlib/grlib.h"
+#include "drivers/frame.h"
+#include "drivers/kentec320x240x16_ssd2119.h"
+#include "drivers/pinout.h"
+#include "utils/uartstdio.h"
+
+//*****************************************************************************
+//
+//! \addtogroup example_list
+//! <h1>AES128 and AES256 ECB Decryption Demo (aes_ecb_decrypt)</h1>
+//!
+//! Simple demo showing an decryption operation using the AES128 and AES256
+//! modules in ECB mode. A single block of data is decrypted.
+//!
+//! Please note that the use of interrupts and uDMA is not required for the
+//! operation of the module. It is only done for demonstration purposes.
+//
+//*****************************************************************************
+
+//*****************************************************************************
+//
+// Configuration defines.
+//
+//*****************************************************************************
+#define CCM_LOOP_TIMEOUT 500000
+
+//*****************************************************************************
+//
+// The DMA control structure table.
+//
+//*****************************************************************************
+#if defined(ewarm)
+#pragma data_alignment=1024
+tDMAControlTable g_psDMAControlTable[64];
+#elif defined(ccs)
+#pragma DATA_ALIGN(g_psDMAControlTable, 1024)
+tDMAControlTable g_psDMAControlTable[64];
+#else
+tDMAControlTable g_psDMAControlTable[64] __attribute__((aligned(1024)));
+#endif
+
+//*****************************************************************************
+//
+// Sample plaintext, ciphertext, and key from the NIST SP 800-38A document.
+//
+//*****************************************************************************
+uint32_t g_pui32AESPlainText[16] =
+{
+ 0xe2bec16b, 0x969f402e, 0x117e3de9, 0x2a179373,
+ 0x578a2dae, 0x9cac031e, 0xac6fb79e, 0x518eaf45,
+ 0x461cc830, 0x11e45ca3, 0x19c1fbe5, 0xef520a1a,
+ 0x45249ff6, 0x179b4fdf, 0x7b412bad, 0x10376ce6
+};
+
+uint32_t g_pui32AES128Key[4] =
+{
+ 0x16157e2b, 0xa6d2ae28, 0x8815f7ab, 0x3c4fcf09
+};
+
+uint32_t g_pui32AES256Key[8] =
+{
+ 0x10eb3d60, 0xbe71ca15, 0xf0ae732b, 0x81777d85,
+ 0x072c351f, 0xd708613b, 0xa310982d, 0xf4df1409
+};
+
+uint32_t g_pui32AES128CipherText[16] =
+{
+ 0xb47bd73a, 0x60367a0d, 0xf3ca9ea8, 0x97ef6624,
+ 0x85d5d3f5, 0x9d69b903, 0x5a8985e7, 0xafbafd96,
+ 0x7fcdb143, 0x23ce8e59, 0xe3001b88, 0x880603ed,
+ 0x5e780c7b, 0x3fade827, 0x71202382, 0xd45d7204
+};
+
+uint32_t g_pui32AES256CipherText[16] =
+{
+ 0xbdd1eef3, 0x3ca0d2b5, 0x7e5a4b06, 0xf881b13d,
+ 0x10cb1c59, 0x26ed10d4, 0x4aa75bdc, 0x70283631,
+ 0xb921edb6, 0xf9f4a69c, 0xb1e753f1, 0x1dedafbe,
+ 0x7a4b3023, 0xfff3f939, 0x8f8d7d06, 0xc7ec249e
+};
+
+//*****************************************************************************
+//
+// The error routine that is called if the driver library encounters an error.
+//
+//*****************************************************************************
+#ifdef DEBUG
+void
+__error__(char *pcFilename, uint32_t ui32Line)
+{
+}
+#endif
+
+//*****************************************************************************
+//
+// Round up length to nearest 16 byte boundary. This is needed because all
+// four data registers must be written at once. This is handled in the AES
+// driver, but if using uDMA, the length must rounded up.
+//
+//*****************************************************************************
+uint32_t
+LengthRoundUp(uint32_t ui32Length)
+{
+ uint32_t ui32Remainder;
+
+ ui32Remainder = ui32Length % 16;
+ if(ui32Remainder == 0)
+ {
+ return(ui32Length);
+ }
+ else
+ {
+ return(ui32Length + (16 - ui32Remainder));
+ }
+}
+
+//*****************************************************************************
+//
+// The AES interrupt handler and interrupt flags.
+//
+//*****************************************************************************
+static volatile bool g_bContextInIntFlag;
+static volatile bool g_bDataInIntFlag;
+static volatile bool g_bContextOutIntFlag;
+static volatile bool g_bDataOutIntFlag;
+static volatile bool g_bContextInDMADoneIntFlag;
+static volatile bool g_bDataInDMADoneIntFlag;
+static volatile bool g_bContextOutDMADoneIntFlag;
+static volatile bool g_bDataOutDMADoneIntFlag;
+
+void
+AESIntHandler(void)
+{
+ uint32_t ui32IntStatus;
+
+ //
+ // Read the AES masked interrupt status.
+ //
+ ui32IntStatus = ROM_AESIntStatus(AES_BASE, true);
+
+ //
+ // Print a different message depending on the interrupt source.
+ //
+ if(ui32IntStatus & AES_INT_CONTEXT_IN)
+ {
+ ROM_AESIntDisable(AES_BASE, AES_INT_CONTEXT_IN);
+ g_bContextInIntFlag = true;
+ UARTprintf(" Context input registers are ready.\n");
+ }
+ if(ui32IntStatus & AES_INT_DATA_IN)
+ {
+ ROM_AESIntDisable(AES_BASE, AES_INT_DATA_IN);
+ g_bDataInIntFlag = true;
+ UARTprintf(" Data FIFO is ready to receive data.\n");
+ }
+ if(ui32IntStatus & AES_INT_CONTEXT_OUT)
+ {
+ ROM_AESIntDisable(AES_BASE, AES_INT_CONTEXT_OUT);
+ g_bContextOutIntFlag = true;
+ UARTprintf(" Context output registers are ready.\n");
+ }
+ if(ui32IntStatus & AES_INT_DATA_OUT)
+ {
+ ROM_AESIntDisable(AES_BASE, AES_INT_DATA_OUT);
+ g_bDataOutIntFlag = true;
+ UARTprintf(" Data FIFO is ready to provide data.\n");
+ }
+ if(ui32IntStatus & AES_INT_DMA_CONTEXT_IN)
+ {
+ ROM_AESIntClear(AES_BASE, AES_INT_DMA_CONTEXT_IN);
+ g_bContextInDMADoneIntFlag = true;
+ UARTprintf(" DMA completed a context write to the internal\n");
+ UARTprintf(" registers.\n");
+ }
+ if(ui32IntStatus & AES_INT_DMA_DATA_IN)
+ {
+ ROM_AESIntClear(AES_BASE, AES_INT_DMA_DATA_IN);
+ g_bDataInDMADoneIntFlag = true;
+ UARTprintf(" DMA has written the last word of input data to\n");
+ UARTprintf(" the internal FIFO of the engine.\n");
+ }
+ if(ui32IntStatus & AES_INT_DMA_CONTEXT_OUT)
+ {
+ ROM_AESIntClear(AES_BASE, AES_INT_DMA_CONTEXT_OUT);
+ g_bContextOutDMADoneIntFlag = true;
+ UARTprintf(" DMA completed the output context movement from\n");
+ UARTprintf(" the internal registers.\n");
+ }
+ if(ui32IntStatus & AES_INT_DMA_DATA_OUT)
+ {
+ ROM_AESIntClear(AES_BASE, AES_INT_DMA_DATA_OUT);
+ g_bDataOutDMADoneIntFlag = true;
+ UARTprintf(" DMA has written the last word of process result.\n");
+ }
+}
+
+//*****************************************************************************
+//
+// Perform an decryption operation.
+//
+//*****************************************************************************
+bool
+AESECBDecrypt(uint32_t ui32Keysize, uint32_t *pui32Src, uint32_t *pui32Dst,
+ uint32_t *pui32Key, uint32_t ui32Length, bool bUseDMA)
+{
+ //
+ // Perform a soft reset.
+ //
+ ROM_AESReset(AES_BASE);
+
+ //
+ // Clear the interrupt flags.
+ //
+ g_bContextInIntFlag = false;
+ g_bDataInIntFlag = false;
+ g_bContextOutIntFlag = false;
+ g_bDataOutIntFlag = false;
+ g_bContextInDMADoneIntFlag = false;
+ g_bDataInDMADoneIntFlag = false;
+ g_bContextOutDMADoneIntFlag = false;
+ g_bDataOutDMADoneIntFlag = false;
+
+ //
+ // Enable all interrupts.
+ //
+ ROM_AESIntEnable(AES_BASE, (AES_INT_CONTEXT_IN | AES_INT_CONTEXT_OUT |
+ AES_INT_DATA_IN | AES_INT_DATA_OUT));
+
+ //
+ // Configure the AES module.
+ //
+ ROM_AESConfigSet(AES_BASE, (ui32Keysize | AES_CFG_DIR_DECRYPT |
+ AES_CFG_MODE_ECB));
+
+ //
+ // Write the key.
+ //
+ ROM_AESKey1Set(AES_BASE, pui32Key, ui32Keysize);
+
+ //
+ // Depending on the argument, perform the decryption
+ // with or without uDMA.
+ //
+ if(bUseDMA)
+ {
+ //
+ // Enable DMA interrupts.
+ //
+ ROM_AESIntEnable(AES_BASE, (AES_INT_DMA_CONTEXT_IN |
+ AES_INT_DMA_DATA_IN |
+ AES_INT_DMA_CONTEXT_OUT |
+ AES_INT_DMA_DATA_OUT));
+
+ //
+ // Setup the DMA module to copy data in.
+ //
+ ROM_uDMAChannelAssign(UDMA_CH14_AES0DIN);
+ ROM_uDMAChannelAttributeDisable(UDMA_CH14_AES0DIN,
+ UDMA_ATTR_ALTSELECT |
+ UDMA_ATTR_USEBURST |
+ UDMA_ATTR_HIGH_PRIORITY |
+ UDMA_ATTR_REQMASK);
+ ROM_uDMAChannelControlSet(UDMA_CH14_AES0DIN | UDMA_PRI_SELECT,
+ UDMA_SIZE_32 | UDMA_SRC_INC_32 |
+ UDMA_DST_INC_NONE | UDMA_ARB_4 |
+ UDMA_DST_PROT_PRIV);
+ ROM_uDMAChannelTransferSet(UDMA_CH14_AES0DIN | UDMA_PRI_SELECT,
+ UDMA_MODE_BASIC, (void *)pui32Dst,
+ (void *)(AES_BASE + AES_O_DATA_IN_0),
+ LengthRoundUp(ui32Length) / 4);
+ UARTprintf("Data in DMA request enabled.\n");
+
+ //
+ // Setup the DMA module to copy the data out.
+ //
+ ROM_uDMAChannelAssign(UDMA_CH15_AES0DOUT);
+ ROM_uDMAChannelAttributeDisable(UDMA_CH15_AES0DOUT,
+ UDMA_ATTR_ALTSELECT |
+ UDMA_ATTR_USEBURST |
+ UDMA_ATTR_HIGH_PRIORITY |
+ UDMA_ATTR_REQMASK);
+ ROM_uDMAChannelControlSet(UDMA_CH15_AES0DOUT | UDMA_PRI_SELECT,
+ UDMA_SIZE_32 | UDMA_SRC_INC_NONE |
+ UDMA_DST_INC_32 | UDMA_ARB_4 |
+ UDMA_SRC_PROT_PRIV);
+ ROM_uDMAChannelTransferSet(UDMA_CH15_AES0DOUT | UDMA_PRI_SELECT,
+ UDMA_MODE_BASIC,
+ (void *)(AES_BASE + AES_O_DATA_IN_0),
+ (void *)pui32Src,
+ LengthRoundUp(ui32Length) / 4);
+ UARTprintf("Data out DMA request enabled.\n");
+
+ //
+ // Write the length registers to start the process.
+ //
+ ROM_AESLengthSet(AES_BASE, (uint64_t)ui32Length);
+
+ //
+ // Enable the DMA channels to start the transfers. This must be done after
+ // writing the length to prevent data from copying before the context is
+ // truly ready.
+ //
+ ROM_uDMAChannelEnable(UDMA_CH14_AES0DIN);
+ ROM_uDMAChannelEnable(UDMA_CH15_AES0DOUT);
+
+ //
+ // Enable DMA requests
+ //
+ ROM_AESDMAEnable(AES_BASE, AES_DMA_DATA_IN | AES_DMA_DATA_OUT);
+
+ //
+ // Wait for the data in DMA done interrupt.
+ //
+ while(!g_bDataInDMADoneIntFlag)
+ {
+ }
+
+ //
+ // Wait for the data out DMA done interrupt.
+ //
+ while(!g_bDataOutDMADoneIntFlag)
+ {
+ }
+ }
+ else
+ {
+ //
+ // Perform the decryption.
+ //
+ ROM_AESDataProcess(AES_BASE, pui32Src, pui32Dst, ui32Length);
+ }
+
+ return(true);
+}
+
+//*****************************************************************************
+//
+// Initialize the AES and CCM modules.
+//
+//*****************************************************************************
+bool
+AESInit(void)
+{
+ uint32_t ui32Loop;
+
+ //
+ // Check that the CCM peripheral is present.
+ //
+ if(!ROM_SysCtlPeripheralPresent(SYSCTL_PERIPH_CCM0))
+ {
+ UARTprintf("No CCM peripheral found!\n");
+
+ //
+ // Return failure.
+ //
+ return(false);
+ }
+
+ //
+ // The hardware is available, enable it.
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_CCM0);
+
+ //
+ // Wait for the peripheral to be ready.
+ //
+ ui32Loop = 0;
+ while(!ROM_SysCtlPeripheralReady(SYSCTL_PERIPH_CCM0))
+ {
+ //
+ // Increment our poll counter.
+ //
+ ui32Loop++;
+
+ if(ui32Loop > CCM_LOOP_TIMEOUT)
+ {
+ //
+ // Timed out, notify and spin.
+ //
+ UARTprintf("Time out on CCM ready after enable.\n");
+
+ //
+ // Return failure.
+ //
+ return(false);
+ }
+ }
+
+ //
+ // Reset the peripheral to ensure we are starting from a known condition.
+ //
+ ROM_SysCtlPeripheralReset(SYSCTL_PERIPH_CCM0);
+
+ //
+ // Wait for the peripheral to be ready again.
+ //
+ ui32Loop = 0;
+ while(!ROM_SysCtlPeripheralReady(SYSCTL_PERIPH_CCM0))
+ {
+ //
+ // Increment our poll counter.
+ //
+ ui32Loop++;
+
+ if(ui32Loop > CCM_LOOP_TIMEOUT)
+ {
+ //
+ // Timed out, spin.
+ //
+ UARTprintf("Time out on CCM ready after reset.\n");
+
+ //
+ // Return failure.
+ //
+ return(false);
+ }
+ }
+
+ //
+ // Return initialization success.
+ //
+ return(true);
+}
+
+//*****************************************************************************
+//
+// Configure the UART and its pins. This must be called before UARTprintf().
+//
+//*****************************************************************************
+void
+ConfigureUART(void)
+{
+ //
+ // Enable the GPIO Peripheral used by the UART.
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOA);
+
+ //
+ // Enable UART0
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_UART0);
+
+ //
+ // Configure GPIO Pins for UART mode.
+ //
+ ROM_GPIOPinConfigure(GPIO_PA0_U0RX);
+ ROM_GPIOPinConfigure(GPIO_PA1_U0TX);
+ ROM_GPIOPinTypeUART(GPIO_PORTA_BASE, GPIO_PIN_0 | GPIO_PIN_1);
+
+ //
+ // Use the internal 16MHz oscillator as the UART clock source.
+ //
+ ROM_UARTClockSourceSet(UART0_BASE, UART_CLOCK_PIOSC);
+
+ //
+ // Initialize the UART for console I/O.
+ //
+ UARTStdioConfig(0, 115200, 16000000);
+}
+
+//*****************************************************************************
+//
+// This example decrypts blocks of plaintext using AES128 in ECB mode. It
+// does the decryption first without uDMA and then with uDMA. The results
+// are checked after each operation.
+//
+//*****************************************************************************
+int
+main(void)
+{
+ uint32_t pui32PlainText[16], ui32Errors, ui32Idx, ui32SysClock;
+ uint32_t ui32Keysize;
+ tContext sContext;
+ uint8_t ui8Loop;
+
+ //
+ // Run from the PLL at 120 MHz.
+ //
+ ui32SysClock = MAP_SysCtlClockFreqSet((SYSCTL_XTAL_25MHZ |
+ SYSCTL_OSC_MAIN | SYSCTL_USE_PLL |
+ SYSCTL_CFG_VCO_480), 120000000);
+
+ //
+ // Configure the device pins.
+ //
+ PinoutSet();
+
+ //
+ // Initialize the display driver.
+ //
+ Kentec320x240x16_SSD2119Init(ui32SysClock);
+
+ //
+ // Initialize the graphics context.
+ //
+ GrContextInit(&sContext, &g_sKentec320x240x16_SSD2119);
+
+ //
+ // Draw the application frame.
+ //
+ FrameDraw(&sContext, "aes-ecb-decrypt");
+
+ //
+ // Show some instructions on the display
+ //
+ GrContextFontSet(&sContext, g_psFontCm20);
+ GrContextForegroundSet(&sContext, ClrWhite);
+ GrStringDrawCentered(&sContext, "Connect a terminal to", -1,
+ GrContextDpyWidthGet(&sContext) / 2, 60, false);
+ GrStringDrawCentered(&sContext, "UART0 (115200,N,8,1)", -1,
+ GrContextDpyWidthGet(&sContext) / 2, 80, false);
+ GrStringDrawCentered(&sContext, "for more information.", -1,
+ GrContextDpyWidthGet(&sContext) / 2, 100, false);
+
+ //
+ // Initialize local variables.
+ //
+ ui32Errors = 0;
+
+ //
+ // Enable stacking for interrupt handlers. This allows floating-point
+ // instructions to be used within interrupt handlers, but at the expense of
+ // extra stack usage.
+ //
+ ROM_FPUStackingEnable();
+
+ //
+ // Configure the system clock to run off the internal 16MHz oscillator.
+ //
+ MAP_SysCtlClockFreqSet(SYSCTL_OSC_INT | SYSCTL_USE_OSC, 16000000);
+
+ //
+ // Enable AES interrupts.
+ //
+ ROM_IntEnable(INT_AES0);
+
+ //
+ // Enable debug output on UART0 and print a welcome message.
+ //
+ ConfigureUART();
+ UARTprintf("Starting AES ECB decryption demo.\n");
+ GrStringDrawCentered(&sContext, "Starting demo...", -1,
+ GrContextDpyWidthGet(&sContext) / 2, 140, false);
+
+ //
+ // Enable the uDMA module.
+ //
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_UDMA);
+
+ //
+ // Setup the control table.
+ //
+ ROM_uDMAEnable();
+ ROM_uDMAControlBaseSet(g_psDMAControlTable);
+
+ //
+ // Initialize the CCM and AES modules.
+ //
+ if(!AESInit())
+ {
+ UARTprintf("Initialization of the AES module failed.\n");
+ ui32Errors |= 0x00000001;
+ }
+
+ //
+ // Perform the same operation with 128bit key first, then 256bit key.
+ //
+ for(ui8Loop = 0; ui8Loop < 2; ui8Loop++)
+ {
+
+ ui32Keysize = (ui8Loop == 0)?AES_CFG_KEY_SIZE_128BIT:
+ AES_CFG_KEY_SIZE_256BIT;
+ UARTprintf("\nKey Size: %sbit\n", ((ui8Loop == 0)?"128":"256"));
+
+ //
+ // Clear the array containing the plaintext.
+ //
+ for(ui32Idx = 0; ui32Idx < 16; ui32Idx++)
+ {
+ pui32PlainText[ui32Idx] = 0;
+ }
+
+ //
+ // Perform the decryption without uDMA.
+ //
+ UARTprintf("Performing decryption without uDMA.\n");
+ AESECBDecrypt(ui32Keysize,
+ (ui8Loop == 0)?g_pui32AES128CipherText:g_pui32AES256CipherText,
+ pui32PlainText,
+ (ui8Loop == 0)?g_pui32AES128Key:g_pui32AES256Key,
+ 64, false);
+
+ //
+ // Check the result.
+ //
+ for(ui32Idx = 0; ui32Idx < 16; ui32Idx++)
+ {
+ if(pui32PlainText[ui32Idx] != g_pui32AESPlainText[ui32Idx])
+ {
+ UARTprintf("Plaintext mismatch on word %d. Exp: 0x%x, Act: 0x%x\n",
+ ui32Idx, g_pui32AESPlainText[ui32Idx],
+ pui32PlainText[ui32Idx]);
+ ui32Errors |= (ui32Idx << 16) | 0x00000002;
+ }
+ }
+
+ //
+ // Clear the array containing the plaintext.
+ //
+ for(ui32Idx = 0; ui32Idx < 16; ui32Idx++)
+ {
+ pui32PlainText[ui32Idx] = 0;
+ }
+
+ //
+ // Perform the decryption with uDMA.
+ //
+ UARTprintf("Performing decryption with uDMA.\n");
+ AESECBDecrypt(ui32Keysize, pui32PlainText,
+ (ui8Loop == 0)?g_pui32AES128CipherText:g_pui32AES256CipherText,
+ (ui8Loop == 0)?g_pui32AES128Key:g_pui32AES256Key,
+ 64, true);
+
+ //
+ // Check the result.
+ //
+ for(ui32Idx = 0; ui32Idx < 16; ui32Idx++)
+ {
+ if(pui32PlainText[ui32Idx] != g_pui32AESPlainText[ui32Idx])
+ {
+ UARTprintf("Plaintext mismatch on word %d. Exp: 0x%x, Act: 0x%x\n",
+ ui32Idx, g_pui32AESPlainText[ui32Idx],
+ pui32PlainText[ui32Idx]);
+ ui32Errors |= (ui32Idx << 16) | 0x00000004;
+ }
+ }
+ }
+
+ //
+ // Finished.
+ //
+ if(ui32Errors)
+ {
+ UARTprintf("Demo failed with error code 0x%x.\n", ui32Errors);
+ GrStringDrawCentered(&sContext, "Demo failed.", -1,
+ GrContextDpyWidthGet(&sContext) / 2, 180, false);
+ }
+ else
+ {
+ UARTprintf("Demo completed successfully.\n");
+ GrStringDrawCentered(&sContext, "Demo passed.", -1,
+ GrContextDpyWidthGet(&sContext) / 2, 180, false);
+ }
+
+ while(1)
+ {
+ }
+}
|