path: root/driverlib/sysexc.c

//*****************************************************************************
//
// sysexc.c - Routines for the System Exception Module.
//
// Copyright (c) 2011-2012 Texas Instruments Incorporated.  All rights reserved.
// Software License Agreement
// 
//   Redistribution and use in source and binary forms, with or without
//   modification, are permitted provided that the following conditions
//   are met:
// 
//   Redistributions of source code must retain the above copyright
//   notice, this list of conditions and the following disclaimer.
// 
//   Redistributions in binary form must reproduce the above copyright
//   notice, this list of conditions and the following disclaimer in the
//   documentation and/or other materials provided with the  
//   distribution.
// 
//   Neither the name of Texas Instruments Incorporated nor the names of
//   its contributors may be used to endorse or promote products derived
//   from this software without specific prior written permission.
// 
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// 
// This is part of revision 9453 of the Stellaris Peripheral Driver Library.
//
//*****************************************************************************

//*****************************************************************************
//
//! \addtogroup sysexc_api
//! @{
//
//*****************************************************************************

#include "inc/hw_ints.h"
#include "inc/hw_sysexc.h"
#include "inc/hw_types.h"
#include "driverlib/interrupt.h"

//*****************************************************************************
//
//! Registers an interrupt handler for the system exception interrupt.
//!
//! \param pfnHandler is a pointer to the function to be called when the system
//! exception interrupt occurs.
//!
//! This function places the address of the system exception interrupt handler
//! into the interrupt vector table in SRAM.  This function also enables the
//! global interrupt in the interrupt controller; specific system exception
//! interrupts must be enabled via SysExcIntEnable().  It is the interrupt
//! handler's responsibility to clear the interrupt source.
//!
//! \sa IntRegister() for important information about registering interrupt
//! handlers.
//!
//! \return None.
//
//*****************************************************************************
void
SysExcIntRegister(void (*pfnHandler)(void))
{
    //
    // Register the interrupt handler.
    //
    IntRegister(INT_SYSEXC, pfnHandler);

    //
    // Enable the system exception interrupt.
    //
    IntEnable(INT_SYSEXC);
}

//*****************************************************************************
//
//! Unregisters the system exception interrupt handler.
//!
//! This function removes the system exception interrupt handler from the
//! vector table in SRAM.  This function also masks off the system exception
//! interrupt in the interrupt controller so that the interrupt handler is no
//! longer called.
//!
//! \sa IntRegister() for important information about registering interrupt
//! handlers.
//!
//! \return None.
//
//*****************************************************************************
void
SysExcIntUnregister(void)
{
    //
    // Disable the system exception interrupt.
    //
    IntDisable(INT_SYSEXC);

    //
    // Unregister the system exception interrupt handler.
    //
    IntUnregister(INT_SYSEXC);
}

//*****************************************************************************
//
//! Enables individual system exception interrupt sources.
//!
//! \param ulIntFlags is the bit mask of the interrupt sources to be enabled.
//!
//! This function enables the indicated system exception interrupt sources.
//! Only the sources that are enabled can be reflected to the processor
//! interrupt; disabled sources have no effect on the processor.
//!
//! The \e ulIntFlags parameter is the logical OR of any of the following:
//!
//! - \b SYSEXC_INT_FP_IXC - Floating-point inexact exception interrupt
//! - \b SYSEXC_INT_FP_OFC - Floating-point overflow exception interrupt
//! - \b SYSEXC_INT_FP_UFC - Floating-point underflow exception interrupt
//! - \b SYSEXC_INT_FP_IOC - Floating-point invalid operation interrupt
//! - \b SYSEXC_INT_FP_DZC - Floating-point divide by zero exception interrupt
//! - \b SYSEXC_INT_FP_IDC - Floating-point input denormal exception interrupt
//!
//! \return None.
//
//*****************************************************************************
void
SysExcIntEnable(unsigned long ulIntFlags)
{
    //
    // Enable the specified interrupts.
    //
    HWREG(SYSEXC_IM) |= ulIntFlags;
}

//*****************************************************************************
//
//! Disables individual system exception interrupt sources.
//!
//! \param ulIntFlags is the bit mask of the interrupt sources to be disabled.
//!
//! This function disables the indicated system exception interrupt sources.
//! Only sources that are enabled can be reflected to the processor interrupt;
//! disabled sources have no effect on the processor.
//!
//! The \e ulIntFlags parameter is the logical OR of any of the following:
//!
//! - \b SYSEXC_INT_FP_IXC - Floating-point inexact exception interrupt
//! - \b SYSEXC_INT_FP_OFC - Floating-point overflow exception interrupt
//! - \b SYSEXC_INT_FP_UFC - Floating-point underflow exception interrupt
//! - \b SYSEXC_INT_FP_IOC - Floating-point invalid operation interrupt
//! - \b SYSEXC_INT_FP_DZC - Floating-point divide by zero exception interrupt
//! - \b SYSEXC_INT_FP_IDC - Floating-point input denormal exception interrupt
//!
//! \return None.
//
//*****************************************************************************
void
SysExcIntDisable(unsigned long ulIntFlags)
{
    //
    // Disable the specified interrupts.
    //
    HWREG(SYSEXC_IM) &= ~(ulIntFlags);
}

//*****************************************************************************
//
//! Gets the current system exception interrupt status.
//!
//! \param bMasked is \b false if the raw interrupt status is required and
//! \b true if the masked interrupt status is required.
//!
//! This function returns the system exception interrupt status.  Either the
//! raw interrupt status or the status of interrupts that are allowed to
//! reflect to the processor can be returned.
//!
//! \return Returns the current system exception interrupt status, enumerated
//! as the logical OR of \b SYSEXC_INT_FP_IXC, \b SYSEXC_INT_FP_OFC,
//! \b SYSEXC_INT_FP_UFC, \b SYSEXC_INT_FP_IOC, \b SYSEXC_INT_FP_DZC, and
//! \b SYSEXC_INT_FP_IDC.
//
//*****************************************************************************
unsigned long
SysExcIntStatus(tBoolean bMasked)
{
    //
    // Return either the interrupt status or the raw interrupt status as
    // requested.
    //
    if(bMasked)
    {
        return(HWREG(SYSEXC_MIS));
    }
    else
    {
        return(HWREG(SYSEXC_RIS));
    }
}

//*****************************************************************************
//
//! Clears system exception interrupt sources.
//!
//! \param ulIntFlags is a bit mask of the interrupt sources to be cleared.
//!
//! This function clears the specified system exception interrupt sources, so
//! that they no longer assert.  This function must be called in the interrupt
//! handler to keep the interrupt from being recognized again immediately upon
//! exit.
//!
//! The \e ulIntFlags parameter is the logical OR of any of the following:
//!
//! - \b SYSEXC_INT_FP_IXC - Floating-point inexact exception interrupt
//! - \b SYSEXC_INT_FP_OFC - Floating-point overflow exception interrupt
//! - \b SYSEXC_INT_FP_UFC - Floating-point underflow exception interrupt
//! - \b SYSEXC_INT_FP_IOC - Floating-point invalid operation interrupt
//! - \b SYSEXC_INT_FP_DZC - Floating-point divide by zero exception interrupt
//! - \b SYSEXC_INT_FP_IDC - Floating-point input denormal exception interrupt
//!
//! \note Because there is a write buffer in the Cortex-M processor, it may
//! take several clock cycles before the interrupt source is actually cleared.
//! Therefore, it is recommended that the interrupt source be cleared early in
//! the interrupt handler (as opposed to the very last action) to avoid
//! returning from the interrupt handler before the interrupt source is
//! actually cleared.  Failure to do so may result in the interrupt handler
//! being immediately reentered (because the interrupt controller still sees
//! the interrupt source asserted).
//!
//! \return None.
//
//*****************************************************************************
void
SysExcIntClear(unsigned long ulIntFlags)
{
    //
    // Clear the requested interrupt sources.
    //
    HWREG(SYSEXC_IC) = ulIntFlags;
}

//*****************************************************************************
//
// Close the Doxygen group.
//! @}
//
//*****************************************************************************