1 files changed, 82 insertions, 0 deletions
diff --git a/usblib/device/usbdhandler.c b/usblib/device/usbdhandler.c
new file mode 100644
index 0000000..5ba33e5
--- /dev/null
+++ b/usblib/device/usbdhandler.c
@@ -0,0 +1,82 @@
+//*****************************************************************************
+//
+// usbhandler.c - General USB handling routines.
+//
+// Copyright (c) 2007-2012 Texas Instruments Incorporated.  All rights reserved.
+// Software License Agreement
+// 
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+// 
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+// 
+// This is part of revision 9453 of the Stellaris USB Library.
+//
+//*****************************************************************************
+
+#include "inc/hw_memmap.h"
+#include "inc/hw_types.h"
+#include "driverlib/rom.h"
+#include "driverlib/rom_map.h"
+#include "driverlib/usb.h"
+#include "usblib/usblib.h"
+#include "usblib/device/usbdevice.h"
+#include "usblib/device/usbdevicepriv.h"
+#include "usblib/usblibpriv.h"
+
+//*****************************************************************************
+//
+//! \addtogroup device_api
+//! @{
+//
+//*****************************************************************************
+
+//*****************************************************************************
+//
+//! The USB device interrupt handler.
+//!
+//! This the main USB interrupt handler entry point for use in USB device
+//! applications.  This top-level handler will branch the interrupt off to the
+//! appropriate application or stack handlers depending on the current status
+//! of the USB controller.
+//!
+//! Applications which operate purely as USB devices (rather than dual mode
+//! applications which can operate in either device or host mode at different
+//! times) must ensure that a pointer to this function is installed in the
+//! interrupt vector table entry for the USB0 interrupt.  For dual mode
+//! operation, the vector should be set to point to \e USB0DualModeIntHandler()
+//! instead.
+//!
+//! \return None.
+//
+//*****************************************************************************
+void
+USB0DeviceIntHandler(void)
+{
+    unsigned long ulStatus;
+
+    //
+    // Get the controller interrupt status.
+    //
+    ulStatus = MAP_USBIntStatusControl(USB0_BASE);
+
+    //
+    // Call the internal handler.
+    //
+    USBDeviceIntHandlerInternal(0, ulStatus);
+}
+
+//*****************************************************************************
+//
+// Close the Doxygen group.
+//! @}
+//
+//*****************************************************************************