1 files changed, 78 insertions, 0 deletions
diff --git a/boards/ek-lm4f120xl/hello/hello.icf b/boards/ek-lm4f120xl/hello/hello.icf
new file mode 100644
index 0000000..9a79d10
--- /dev/null
+++ b/boards/ek-lm4f120xl/hello/hello.icf
@@ -0,0 +1,78 @@
+//*****************************************************************************
+//
+// hello.icf - Linker configuration file for hello.
+//
+// Copyright (c) 2012 Texas Instruments Incorporated.  All rights reserved.
+// Software License Agreement
+// 
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+// 
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+// 
+// This is part of revision 9453 of the EK-LM4F120XL Firmware Package.
+//
+//*****************************************************************************
+
+//
+// Define a memory region that covers the entire 4 GB addressible space of the
+// processor.
+//
+define memory mem with size = 4G;
+
+//
+// Define a region for the on-chip flash.
+//
+define region FLASH = mem:[from 0x00000000 to 0x0003ffff];
+
+//
+// Define a region for the on-chip SRAM.
+//
+define region SRAM = mem:[from 0x20000000 to 0x20007fff];
+
+//
+// Define a block for the heap.  The size should be set to something other
+// than zero if things in the C library that require the heap are used.
+//
+define block HEAP with alignment = 8, size = 0x00000000 { };
+
+//
+// Indicate that the read/write values should be initialized by copying from
+// flash.
+//
+initialize by copy { readwrite };
+
+//
+// Indicate that the noinit values should be left alone.  This includes the
+// stack, which if initialized will destroy the return address from the
+// initialization code, causing the processor to branch to zero and fault.
+//
+do not initialize { section .noinit };
+
+//
+// Place the interrupt vectors at the start of flash.
+//
+place at start of FLASH { readonly section .intvec };
+
+//
+// Place the remainder of the read-only items into flash.
+//
+place in FLASH { readonly };
+
+//
+// Place the RAM vector table at the start of SRAM.
+//
+place at start of SRAM { section VTABLE };
+
+//
+// Place all read/write items into SRAM.
+//
+place in SRAM { readwrite, block HEAP };