Revert "Move RGB and button drivers 2 dirs up"

This reverts commit 3a282de9331ea261eeadca0dd36c0527f173dd4c.

1 files changed, 0 insertions, 193 deletions

diff --git a/drivers/buttons.c b/drivers/buttons.c
deleted file mode 100644
index 4415168..0000000
--- a/drivers/buttons.c
+++ /dev/null
@@ -1,193 +0,0 @@
-//*****************************************************************************

-//

-// buttons.c - Evaluation board driver for push buttons.

-//

-// Copyright (c) 2012 Texas Instruments Incorporated.  All rights reserved.

-// Software License Agreement

-// 

-// Texas Instruments (TI) is supplying this software for use solely and

-// exclusively on TI's microcontroller products. The software is owned by

-// TI and/or its suppliers, and is protected under applicable copyright

-// laws. You may not combine this software with "viral" open-source

-// software in order to form a larger program.

-// 

-// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.

-// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT

-// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

-// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY

-// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL

-// DAMAGES, FOR ANY REASON WHATSOEVER.

-// 

-// This is part of revision 9453 of the EK-LM4F120XL Firmware Package.

-//

-//*****************************************************************************

-

-#include "inc/hw_types.h"

-#include "inc/hw_memmap.h"

-#include "inc/hw_gpio.h"

-#include "driverlib/sysctl.h"

-#include "driverlib/rom.h"

-#include "driverlib/pin_map.h"

-#include "driverlib/gpio.h"

-#include "drivers/buttons.h"

-

-//*****************************************************************************

-//

-//! \addtogroup buttons_api

-//! @{

-//

-//*****************************************************************************

-

-//*****************************************************************************

-//

-// Holds the current, debounced state of each button.  A 0 in a bit indicates

-// that that button is currently pressed, otherwise it is released.

-// We assume that we start with all the buttons released (though if one is

-// pressed when the application starts, this will be detected).

-//

-//*****************************************************************************

-static unsigned char g_ucButtonStates = ALL_BUTTONS;

-

-//*****************************************************************************

-//

-//! Polls the current state of the buttons and determines which have changed.

-//!

-//! \param pucDelta points to a character that will be written to indicate

-//! which button states changed since the last time this function was called.

-//! This value is derived from the debounced state of the buttons.

-//! \param pucRawState points to a location where the raw button state will

-//! be stored.

-//!

-//! This function should be called periodically by the application to poll the

-//! pushbuttons.  It determines both the current debounced state of the buttons

-//! and also which buttons have changed state since the last time the function

-//! was called.

-//!

-//! In order for button debouncing to work properly, this function should be

-//! caled at a regular interval, even if the state of the buttons is not needed

-//! that often.

-//!

-//! If button debouncing is not required, the the caller can pass a pointer

-//! for the \e pucRawState parameter in order to get the raw state of the

-//! buttons.  The value returned in \e pucRawState will be a bit mask where

-//! a 1 indicates the buttons is pressed.

-//!

-//! \return Returns the current debounced state of the buttons where a 1 in the

-//! button ID's position indicates that the button is pressed and a 0

-//! indicates that it is released.

-//

-//*****************************************************************************

-unsigned char

-ButtonsPoll(unsigned char *pucDelta, unsigned char *pucRawState)

-{

-    unsigned long ulDelta;

-    unsigned long ulData;

-    static unsigned char ucSwitchClockA = 0;

-    static unsigned char ucSwitchClockB = 0;

-

-    //

-    // Read the raw state of the push buttons.  Save the raw state

-    // (inverting the bit sense) if the caller supplied storage for the

-    // raw value.

-    //

-    ulData = (ROM_GPIOPinRead(BUTTONS_GPIO_BASE, ALL_BUTTONS));

-    if(pucRawState)

-    {

-        *pucRawState = (unsigned char)~ulData;

-    }

-

-    //

-    // Determine the switches that are at a different state than the debounced

-    // state.

-    //

-    ulDelta = ulData ^ g_ucButtonStates;

-

-    //

-    // Increment the clocks by one.

-    //

-    ucSwitchClockA ^= ucSwitchClockB;

-    ucSwitchClockB = ~ucSwitchClockB;

-

-    //

-    // Reset the clocks corresponding to switches that have not changed state.

-    //

-    ucSwitchClockA &= ulDelta;

-    ucSwitchClockB &= ulDelta;

-

-    //

-    // Get the new debounced switch state.

-    //

-    g_ucButtonStates &= ucSwitchClockA | ucSwitchClockB;

-    g_ucButtonStates |= (~(ucSwitchClockA | ucSwitchClockB)) & ulData;

-

-    //

-    // Determine the switches that just changed debounced state.

-    //

-    ulDelta ^= (ucSwitchClockA | ucSwitchClockB);

-

-    //

-    // Store the bit mask for the buttons that have changed for return to

-    // caller.

-    //

-    if(pucDelta)

-    {

-        *pucDelta = (unsigned char)ulDelta;

-    }

-

-    //

-    // Return the debounced buttons states to the caller.  Invert the bit

-    // sense so that a '1' indicates the button is pressed, which is a

-    // sensible way to interpret the return value.

-    //

-    return(~g_ucButtonStates);

-}

-

-//*****************************************************************************

-//

-//! Initializes the GPIO pins used by the board pushbuttons.

-//!

-//! This function must be called during application initialization to

-//! configure the GPIO pins to which the pushbuttons are attached.  It enables

-//! the port used by the buttons and configures each button GPIO as an input

-//! with a weak pull-up.

-//!

-//! \return None.

-//

-//*****************************************************************************

-void

-ButtonsInit(void)

-{

-    //

-    // Enable the GPIO port to which the pushbuttons are connected.

-    //

-    ROM_SysCtlPeripheralEnable(BUTTONS_GPIO_PERIPH);

-

-    //

-    // Unlock PF0 so we can change it to a GPIO input

-    // Once we have enabled (unlocked) the commit register then re-lock it

-    // to prevent further changes.  PF0 is muxed with NMI thus a special case.

-    //

-    HWREG(BUTTONS_GPIO_BASE + GPIO_O_LOCK) = GPIO_LOCK_KEY_DD;

-    HWREG(BUTTONS_GPIO_BASE + GPIO_O_CR) |= 0x01;

-    HWREG(BUTTONS_GPIO_BASE + GPIO_O_LOCK) = 0;

-

-    //

-    // Set each of the button GPIO pins as an input with a pull-up.

-    //

-    ROM_GPIODirModeSet(BUTTONS_GPIO_BASE, ALL_BUTTONS, GPIO_DIR_MODE_IN);

-    ROM_GPIOPadConfigSet(BUTTONS_GPIO_BASE, ALL_BUTTONS,

-                         GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_STD_WPU);

-

-    //

-    // Initialize the debounced button state with the current state read from

-    // the GPIO bank.

-    //

-    g_ucButtonStates = ROM_GPIOPinRead(BUTTONS_GPIO_BASE, ALL_BUTTONS);

-}

-

-//*****************************************************************************

-//

-// Close the Doxygen group.

-//! @}

-//

-//*****************************************************************************