1 files changed, 9 insertions, 9 deletions
diff --git a/README.md b/README.md
index 01d2c85..3f405cd 100644
--- a/README.md
+++ b/README.md
@@ -30,17 +30,17 @@ Then edit `config.h` with your WiFi and MQTT settings.
 ## Build & Upload
 
 ```bash
-# Find your port
-arduino-cli board list
-
-# Compile
-arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc,FlashSize=16M,PSRAM=opi" .
+make compile    # compile only
+make upload     # upload only
+make monitor    # serial monitor
+make flash      # compile + upload
+make all        # compile + upload + monitor
+```
 
-# Upload (replace /dev/ttyACM0 with your port)
-arduino-cli upload --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc,FlashSize=16M,PSRAM=opi" --port /dev/ttyACM0 .
+If your port differs from `/dev/ttyACM0`, override it:
 
-# Monitor
-arduino-cli monitor --port /dev/ttyACM0 --config baudrate=115200
+```bash
+make flash PORT=/dev/ttyUSB0
 ```
 
 ## Expected Output