#ifndef __LINUX_FT5X0X_TS_H__
#define __LINUX_FT5X0X_TS_H__


#define SCREEN_MAX_X    320
#define SCREEN_MAX_Y    480

#define FT5x0x_REG_FW_VER		0xA6
#define PRESS_MAX       255
#define FT5x0x_REG_POINT_RATE	0x88
#define TOUCH_VIRTUAL_KEYS

//#define FT5206_TS_DEVICE			"msg2133"
//#define FOCALTECH_TS_DEVICE   	       	"ft5x0x_ts"
#define FOCALTECH_TS_NAME	   	       	"focaltech_ts"
#define FOCALTECH_TS_ADDR				0x38

/*register address*/
#define FT_REG_CHIP_ID				0xA3    //chip ID 
#define FT_REG_FW_VER				0xA6   //FW  version 
#define FT_REG_VENDOR_ID			0xA8   // TP vendor ID 
#define TPD_MAX_POINTS_2                        2
#define TPD_MAX_POINTS_5                        5
#define TPD_MAXPOINTS_10                        10
#define AUTO_CLB_NEED                              1
#define AUTO_CLB_NONEED                          0

struct Upgrade_Info {
        u8 CHIP_ID;
        u8 FTS_NAME[20];
        u8 TPD_MAX_POINTS;
        u8 AUTO_CLB;
	u16 delay_aa;		/*delay of write FT_UPGRADE_AA */
	u16 delay_55;		/*delay of write FT_UPGRADE_55 */
	u8 upgrade_id_1;	/*upgrade id 1 */
	u8 upgrade_id_2;	/*upgrade id 2 */
	u16 delay_readid;	/*delay of read id */
	u16 delay_earse_flash; /*delay of earse flash*/
};

struct ft5x0x_ts_platform_data{
	int irq_gpio_number;
	int reset_gpio_number;
	const char *vdd_name;
	int virtualkeys[12];
	int TP_MAX_X;
	int TP_MAX_Y;
};



int ft5x0x_i2c_Read(struct i2c_client *client, char *writebuf, int writelen,char *readbuf, int readlen);
int ft5x0x_i2c_Write(struct i2c_client *client, char *writebuf, int writelen);


enum ft5x0x_ts_regs {
	FT5X0X_REG_THGROUP					= 0x80,
	FT5X0X_REG_THPEAK						= 0x81,
	FT5X0X_REG_THCAL						= 0x82,
	FT5X0X_REG_THWATER					= 0x83,
	FT5X0X_REG_THTEMP					= 0x84,
	FT5X0X_REG_THDIFF						= 0x85,				
	FT5X0X_REG_CTRL						= 0x86,
	FT5X0X_REG_TIMEENTERMONITOR			= 0x87,
	FT5X0X_REG_PERIODACTIVE				= 0x88,
	FT5X0X_REG_PERIODMONITOR			= 0x89,
	FT5X0X_REG_HEIGHT_B					= 0x8a,
	FT5X0X_REG_MAX_FRAME					= 0x8b,
	FT5X0X_REG_DIST_MOVE					= 0x8c,
	FT5X0X_REG_DIST_POINT				= 0x8d,
	FT5X0X_REG_FEG_FRAME					= 0x8e,
	FT5X0X_REG_SINGLE_CLICK_OFFSET		= 0x8f,
	FT5X0X_REG_DOUBLE_CLICK_TIME_MIN	= 0x90,
	FT5X0X_REG_SINGLE_CLICK_TIME			= 0x91,
	FT5X0X_REG_LEFT_RIGHT_OFFSET		= 0x92,
	FT5X0X_REG_UP_DOWN_OFFSET			= 0x93,
	FT5X0X_REG_DISTANCE_LEFT_RIGHT		= 0x94,
	FT5X0X_REG_DISTANCE_UP_DOWN		= 0x95,
	FT5X0X_REG_ZOOM_DIS_SQR				= 0x96,
	FT5X0X_REG_RADIAN_VALUE				=0x97,
	FT5X0X_REG_MAX_X_HIGH                       	= 0x98,
	FT5X0X_REG_MAX_X_LOW             			= 0x99,
	FT5X0X_REG_MAX_Y_HIGH            			= 0x9a,
	FT5X0X_REG_MAX_Y_LOW             			= 0x9b,
	FT5X0X_REG_K_X_HIGH            			= 0x9c,
	FT5X0X_REG_K_X_LOW             			= 0x9d,
	FT5X0X_REG_K_Y_HIGH            			= 0x9e,
	FT5X0X_REG_K_Y_LOW             			= 0x9f,
	FT5X0X_REG_AUTO_CLB_MODE			= 0xa0,
	FT5X0X_REG_LIB_VERSION_H 				= 0xa1,
	FT5X0X_REG_LIB_VERSION_L 				= 0xa2,		
	FT5X0X_REG_CIPHER						= 0xa3,
	FT5X0X_REG_MODE						= 0xa4,
	FT5X0X_REG_PMODE						= 0xa5,	/* Power Consume Mode		*/	
	FT5X0X_REG_FIRMID						= 0xa6,
	FT5X0X_REG_STATE						= 0xa7,
	FT5X0X_REG_FT5201ID					= 0xa8,
	FT5X0X_REG_ERR						= 0xa9,
	FT5X0X_REG_CLB						= 0xaa,
};

//FT5X0X_REG_PMODE
#define PMODE_ACTIVE        0x00
#define PMODE_MONITOR       0x01
#define PMODE_STANDBY       0x02
#define PMODE_HIBERNATE     0x03


	#ifndef ABS_MT_TOUCH_MAJOR
	#define ABS_MT_TOUCH_MAJOR	0x30	/* touching ellipse */
	#define ABS_MT_TOUCH_MINOR	0x31	/* (omit if circular) */
	#define ABS_MT_WIDTH_MAJOR	0x32	/* approaching ellipse */
	#define ABS_MT_WIDTH_MINOR	0x33	/* (omit if circular) */
	#define ABS_MT_ORIENTATION	0x34	/* Ellipse orientation */
	#define ABS_MT_POSITION_X	0x35	/* Center X ellipse position */
	#define ABS_MT_POSITION_Y	0x36	/* Center Y ellipse position */
	#define ABS_MT_TOOL_TYPE	0x37	/* Type of touching device */
	#define ABS_MT_BLOB_ID		0x38	/* Group set of pkts as blob */
	#define ABS_MT_PRESSURE		0x3a	/* Pressure on contact area */
	#define ABS_MT_TRACKING_ID      0x39	/* Unique ID of initiated contact */
	#endif /* ABS_MT_TOUCH_MAJOR */


#endif