/* ========================================================================== * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_core_if.h $ * $Revision: #13 $ * $Date: 2012/08/10 $ * $Change: 2047372 $ * * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless * otherwise expressly agreed to in writing between Synopsys and you. * * The Software IS NOT an item of Licensed Software or Licensed Product under * any End User Software License Agreement or Agreement for Licensed Product * with Synopsys or any supplement thereto. You are permitted to use and * redistribute this Software in source and binary forms, with or without * modification, provided that redistributions of source code must retain this * notice. You may not view, use, disclose, copy or distribute this file or * any information contained herein except pursuant to this license grant from * Synopsys. If you do not agree with this notice, including the disclaimer * below, then you are not authorized to use the Software. * * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * DAMAGE. * ========================================================================== */ #if !defined(__DWC_CORE_IF_H__) #define __DWC_CORE_IF_H__ #include "dwc_os.h" /** @file * This file defines DWC_OTG Core API */ struct dwc_otg_core_if; typedef struct dwc_otg_core_if dwc_otg_core_if_t; /** Maximum number of Periodic FIFOs */ #define MAX_PERIO_FIFOS 15 /** Maximum number of Periodic FIFOs */ #define MAX_TX_FIFOS 15 /** Maximum number of Endpoints/HostChannels */ #define MAX_EPS_CHANNELS 16 /** SPRAM address configuration */ #define SPRAM_START_ADDR 0x00028000 #define SPRAM_END_ADDR 0x000280e0 extern dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t * _reg_base_addr); extern void dwc_otg_core_init(dwc_otg_core_if_t * _core_if); extern void dwc_otg_cil_remove(dwc_otg_core_if_t * _core_if); extern void dwc_otg_enable_global_interrupts(dwc_otg_core_if_t * _core_if); extern void dwc_otg_disable_global_interrupts(dwc_otg_core_if_t * _core_if); extern uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t * _core_if); extern uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t * _core_if); extern uint8_t dwc_otg_is_dma_enable(dwc_otg_core_if_t * core_if); /** This function should be called on every hardware interrupt. */ extern int32_t dwc_otg_handle_common_intr(dwc_otg_core_if_t *core_if); #ifndef DWC_DEVICE_ONLY extern void dwc_otg_core_fore_host(dwc_otg_core_if_t * core_if); extern int32_t otg_cable_disconnect(dwc_otg_core_if_t * core_if); #endif /** @name OTG Core Parameters */ /** @{ */ /** * Specifies the OTG capabilities. The driver will automatically * detect the value for this parameter if none is specified. * 0 - HNP and SRP capable (default) * 1 - SRP Only capable * 2 - No HNP/SRP capable */ extern int dwc_otg_set_param_otg_cap(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_otg_cap(dwc_otg_core_if_t * core_if); #define DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE 0 #define DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE 1 #define DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE 2 #define dwc_param_otg_cap_default DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE extern int dwc_otg_set_param_opt(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_opt(dwc_otg_core_if_t * core_if); #define dwc_param_opt_default 1 /** * Specifies whether to use slave or DMA mode for accessing the data * FIFOs. The driver will automatically detect the value for this * parameter if none is specified. * 0 - Slave * 1 - DMA (default, if available) */ extern int dwc_otg_set_param_dma_enable(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_dma_enable(dwc_otg_core_if_t * core_if); #define dwc_param_dma_enable_default 1 /** * When DMA mode is enabled specifies whether to use * address DMA or DMA Descritor mode for accessing the data * FIFOs in device mode. The driver will automatically detect * the value for this parameter if none is specified. * 0 - address DMA * 1 - DMA Descriptor(default, if available) */ extern int dwc_otg_set_param_dma_desc_enable(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_dma_desc_enable(dwc_otg_core_if_t * core_if); #define dwc_param_dma_desc_enable_default 1 /** The DMA Burst size (applicable only for External DMA * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32) */ extern int dwc_otg_set_param_dma_burst_size(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_dma_burst_size(dwc_otg_core_if_t * core_if); #define dwc_param_dma_burst_size_default 32 /** * Specifies the maximum speed of operation in host and device mode. * The actual speed depends on the speed of the attached device and * the value of phy_type. The actual speed depends on the speed of the * attached device. * 0 - High Speed (default) * 1 - Full Speed */ extern int dwc_otg_set_param_speed(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_speed(dwc_otg_core_if_t * core_if); #define dwc_param_speed_default 0 #define DWC_SPEED_PARAM_HIGH 0 #define DWC_SPEED_PARAM_FULL 1 /** Specifies whether low power mode is supported when attached * to a Full Speed or Low Speed device in host mode. * 0 - Don't support low power mode (default) * 1 - Support low power mode */ extern int dwc_otg_set_param_host_support_fs_ls_low_power(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_host_support_fs_ls_low_power(dwc_otg_core_if_t * core_if); #define dwc_param_host_support_fs_ls_low_power_default 0 /** Specifies the PHY clock rate in low power mode when connected to a * Low Speed device in host mode. This parameter is applicable only if * HOST_SUPPORT_FS_LS_LOW_POWER is enabled. If PHY_TYPE is set to FS * then defaults to 6 MHZ otherwise 48 MHZ. * * 0 - 48 MHz * 1 - 6 MHz */ extern int dwc_otg_set_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t * core_if); #define dwc_param_host_ls_low_power_phy_clk_default 0 #define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0 #define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1 /** * 0 - Use cC FIFO size parameters * 1 - Allow dynamic FIFO sizing (default) */ extern int dwc_otg_set_param_enable_dynamic_fifo(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_enable_dynamic_fifo(dwc_otg_core_if_t * core_if); #define dwc_param_enable_dynamic_fifo_default 1 /** Total number of 4-byte words in the data FIFO memory. This * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic * Tx FIFOs. * 32 to 32768 (default 8192) * Note: The total FIFO memory depth in the FPGA configuration is 8192. */ extern int dwc_otg_set_param_data_fifo_size(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_data_fifo_size(dwc_otg_core_if_t * core_if); #define dwc_param_data_fifo_size_default 8192 /** Number of 4-byte words in the Rx FIFO in device mode when dynamic * FIFO sizing is enabled. * 16 to 32768 (default 1064) */ extern int dwc_otg_set_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if); #define dwc_param_dev_rx_fifo_size_default 1064 /** Number of 4-byte words in the non-periodic Tx FIFO in device mode * when dynamic FIFO sizing is enabled. * 16 to 32768 (default 1024) */ extern int dwc_otg_set_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if); #define dwc_param_dev_nperio_tx_fifo_size_default 1024 /** Number of 4-byte words in each of the periodic Tx FIFOs in device * mode when dynamic FIFO sizing is enabled. * 4 to 768 (default 256) */ extern int dwc_otg_set_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * core_if, int32_t val, int fifo_num); extern int32_t dwc_otg_get_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * core_if, int fifo_num); #define dwc_param_dev_perio_tx_fifo_size_default 256 /** Number of 4-byte words in the Rx FIFO in host mode when dynamic * FIFO sizing is enabled. * 16 to 32768 (default 1024) */ extern int dwc_otg_set_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if); #define dwc_param_host_rx_fifo_size_default 1024 /** Number of 4-byte words in the non-periodic Tx FIFO in host mode * when Dynamic FIFO sizing is enabled in the core. * 16 to 32768 (default 1024) */ extern int dwc_otg_set_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if); #define dwc_param_host_nperio_tx_fifo_size_default 1024 /** Number of 4-byte words in the host periodic Tx FIFO when dynamic * FIFO sizing is enabled. * 16 to 32768 (default 1024) */ extern int dwc_otg_set_param_host_perio_tx_fifo_size(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_host_perio_tx_fifo_size(dwc_otg_core_if_t * core_if); #define dwc_param_host_perio_tx_fifo_size_default 1024 /** The maximum transfer size supported in bytes. * 2047 to 65,535 (default 65,535) */ extern int dwc_otg_set_param_max_transfer_size(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_max_transfer_size(dwc_otg_core_if_t * core_if); #define dwc_param_max_transfer_size_default 65535 /** The maximum number of packets in a transfer. * 15 to 511 (default 511) */ extern int dwc_otg_set_param_max_packet_count(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_max_packet_count(dwc_otg_core_if_t * core_if); #define dwc_param_max_packet_count_default 511 /** The number of host channel registers to use. * 1 to 16 (default 12) * Note: The FPGA configuration supports a maximum of 12 host channels. */ extern int dwc_otg_set_param_host_channels(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_host_channels(dwc_otg_core_if_t * core_if); #define dwc_param_host_channels_default 12 /** The number of endpoints in addition to EP0 available for device * mode operations. * 1 to 15 (default 6 IN and OUT) * Note: The FPGA configuration supports a maximum of 6 IN and OUT * endpoints in addition to EP0. */ extern int dwc_otg_set_param_dev_endpoints(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_dev_endpoints(dwc_otg_core_if_t * core_if); #define dwc_param_dev_endpoints_default 6 /** * Specifies the type of PHY interface to use. By default, the driver * will automatically detect the phy_type. * * 0 - Full Speed PHY * 1 - UTMI+ (default) * 2 - ULPI */ extern int dwc_otg_set_param_phy_type(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_phy_type(dwc_otg_core_if_t * core_if); #define DWC_PHY_TYPE_PARAM_FS 0 #define DWC_PHY_TYPE_PARAM_UTMI 1 #define DWC_PHY_TYPE_PARAM_ULPI 2 #define dwc_param_phy_type_default DWC_PHY_TYPE_PARAM_UTMI /** * Specifies the UTMI+ Data Width. This parameter is * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI * PHY_TYPE, this parameter indicates the data width between * the MAC and the ULPI Wrapper.) Also, this parameter is * applicable only if the OTG_HSPHY_WIDTH cC parameter was set * to "8 and 16 bits", meaning that the core has been * configured to work at either data path width. * * 8 or 16 bits (default 16) */ extern int dwc_otg_set_param_phy_utmi_width(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_phy_utmi_width(dwc_otg_core_if_t * core_if); #define dwc_param_phy_utmi_width_default 16 /** * Specifies whether the ULPI operates at double or single * data rate. This parameter is only applicable if PHY_TYPE is * ULPI. * * 0 - single data rate ULPI interface with 8 bit wide data * bus (default) * 1 - double data rate ULPI interface with 4 bit wide data * bus */ extern int dwc_otg_set_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if); #define dwc_param_phy_ulpi_ddr_default 0 /** * Specifies whether to use the internal or external supply to * drive the vbus with a ULPI phy. */ extern int dwc_otg_set_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if); #define DWC_PHY_ULPI_INTERNAL_VBUS 0 #define DWC_PHY_ULPI_EXTERNAL_VBUS 1 #define dwc_param_phy_ulpi_ext_vbus_default DWC_PHY_ULPI_INTERNAL_VBUS /** * Specifies whether to use the I2Cinterface for full speed PHY. This * parameter is only applicable if PHY_TYPE is FS. * 0 - No (default) * 1 - Yes */ extern int dwc_otg_set_param_i2c_enable(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_i2c_enable(dwc_otg_core_if_t * core_if); #define dwc_param_i2c_enable_default 0 extern int dwc_otg_set_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if); #define dwc_param_ulpi_fs_ls_default 0 extern int dwc_otg_set_param_ts_dline(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_ts_dline(dwc_otg_core_if_t * core_if); #define dwc_param_ts_dline_default 0 /** * Specifies whether dedicated transmit FIFOs are * enabled for non periodic IN endpoints in device mode * 0 - No * 1 - Yes */ extern int dwc_otg_set_param_en_multiple_tx_fifo(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_en_multiple_tx_fifo(dwc_otg_core_if_t * core_if); #define dwc_param_en_multiple_tx_fifo_default 1 /** Number of 4-byte words in each of the Tx FIFOs in device * mode when dynamic FIFO sizing is enabled. * 4 to 768 (default 256) */ extern int dwc_otg_set_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if, int fifo_num, int32_t val); extern int32_t dwc_otg_get_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if, int fifo_num); #define dwc_param_dev_tx_fifo_size_default 768 /** Thresholding enable flag- * bit 0 - enable non-ISO Tx thresholding * bit 1 - enable ISO Tx thresholding * bit 2 - enable Rx thresholding */ extern int dwc_otg_set_param_thr_ctl(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_thr_ctl(dwc_otg_core_if_t * core_if, int fifo_num); #define dwc_param_thr_ctl_default 0 /** Thresholding length for Tx * FIFOs in 32 bit DWORDs */ extern int dwc_otg_set_param_tx_thr_length(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_tx_thr_length(dwc_otg_core_if_t * core_if); #define dwc_param_tx_thr_length_default 64 /** Thresholding length for Rx * FIFOs in 32 bit DWORDs */ extern int dwc_otg_set_param_rx_thr_length(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_rx_thr_length(dwc_otg_core_if_t * core_if); #define dwc_param_rx_thr_length_default 64 /** * Specifies whether LPM (Link Power Management) support is enabled */ extern int dwc_otg_set_param_lpm_enable(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_lpm_enable(dwc_otg_core_if_t * core_if); #define dwc_param_lpm_enable_default 1 /** * Specifies whether PTI enhancement is enabled */ extern int dwc_otg_set_param_pti_enable(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_pti_enable(dwc_otg_core_if_t * core_if); #define dwc_param_pti_enable_default 0 /** * Specifies whether MPI enhancement is enabled */ extern int dwc_otg_set_param_mpi_enable(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_mpi_enable(dwc_otg_core_if_t * core_if); #define dwc_param_mpi_enable_default 0 /** * Specifies whether ADP capability is enabled */ extern int dwc_otg_set_param_adp_enable(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_adp_enable(dwc_otg_core_if_t * core_if); #define dwc_param_adp_enable_default 0 /** * Specifies whether IC_USB capability is enabled */ extern int dwc_otg_set_param_ic_usb_cap(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_ic_usb_cap(dwc_otg_core_if_t * core_if); #define dwc_param_ic_usb_cap_default 0 extern int dwc_otg_set_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if); #define dwc_param_ahb_thr_ratio_default 0 extern int dwc_otg_set_param_power_down(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_power_down(dwc_otg_core_if_t * core_if); #define dwc_param_power_down_default 0 extern int dwc_otg_set_param_reload_ctl(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_reload_ctl(dwc_otg_core_if_t * core_if); #define dwc_param_reload_ctl_default 0 extern int dwc_otg_set_param_dev_out_nak(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_dev_out_nak(dwc_otg_core_if_t * core_if); #define dwc_param_dev_out_nak_default 1 extern int dwc_otg_set_param_cont_on_bna(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_cont_on_bna(dwc_otg_core_if_t * core_if); #define dwc_param_cont_on_bna_default 0 extern int dwc_otg_set_param_ahb_single(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_ahb_single(dwc_otg_core_if_t * core_if); #define dwc_param_ahb_single_default 0 extern int dwc_otg_set_param_otg_ver(dwc_otg_core_if_t * core_if, int32_t val); extern int32_t dwc_otg_get_param_otg_ver(dwc_otg_core_if_t * core_if); #define dwc_param_otg_ver_default 0 /** @} */ /** @name Access to registers and bit-fields */ /** * Dump core registers and SPRAM */ extern void dwc_otg_dump_dev_registers(dwc_otg_core_if_t * _core_if); extern void dwc_otg_dump_spram(dwc_otg_core_if_t * _core_if); extern void dwc_otg_dump_host_registers(dwc_otg_core_if_t * _core_if); extern void dwc_otg_dump_global_registers(dwc_otg_core_if_t * _core_if); /** * Get host negotiation status. */ extern uint32_t dwc_otg_get_hnpstatus(dwc_otg_core_if_t * core_if); /** * Get srp status */ extern uint32_t dwc_otg_get_srpstatus(dwc_otg_core_if_t * core_if); /** * Set hnpreq bit in the GOTGCTL register. */ extern void dwc_otg_set_hnpreq(dwc_otg_core_if_t * core_if, uint32_t val); /** * Get Content of SNPSID register. */ extern uint32_t dwc_otg_get_gsnpsid(dwc_otg_core_if_t * core_if); /** * Get current mode. * Returns 0 if in device mode, and 1 if in host mode. */ extern uint32_t dwc_otg_get_mode(dwc_otg_core_if_t * core_if); /** * Get value of hnpcapable field in the GUSBCFG register */ extern uint32_t dwc_otg_get_hnpcapable(dwc_otg_core_if_t * core_if); /** * Set value of hnpcapable field in the GUSBCFG register */ extern void dwc_otg_set_hnpcapable(dwc_otg_core_if_t * core_if, uint32_t val); /** * Get value of srpcapable field in the GUSBCFG register */ extern uint32_t dwc_otg_get_srpcapable(dwc_otg_core_if_t * core_if); /** * Set value of srpcapable field in the GUSBCFG register */ extern void dwc_otg_set_srpcapable(dwc_otg_core_if_t * core_if, uint32_t val); /** * Get value of devspeed field in the DCFG register */ extern uint32_t dwc_otg_get_devspeed(dwc_otg_core_if_t * core_if); /** * Set value of devspeed field in the DCFG register */ extern void dwc_otg_set_devspeed(dwc_otg_core_if_t * core_if, uint32_t val); /** * Get the value of busconnected field from the HPRT0 register */ extern uint32_t dwc_otg_get_busconnected(dwc_otg_core_if_t * core_if); /** * Gets the device enumeration Speed. */ extern uint32_t dwc_otg_get_enumspeed(dwc_otg_core_if_t * core_if); /** * Get value of prtpwr field from the HPRT0 register */ extern uint32_t dwc_otg_get_prtpower(dwc_otg_core_if_t * core_if); /** * Get value of flag indicating core state - hibernated or not */ extern uint32_t dwc_otg_get_core_state(dwc_otg_core_if_t * core_if); /** * Set value of prtpwr field from the HPRT0 register */ extern void dwc_otg_set_prtpower(dwc_otg_core_if_t * core_if, uint32_t val); /** * Get value of prtsusp field from the HPRT0 regsiter */ extern uint32_t dwc_otg_get_prtsuspend(dwc_otg_core_if_t * core_if); /** * Set value of prtpwr field from the HPRT0 register */ extern void dwc_otg_set_prtsuspend(dwc_otg_core_if_t * core_if, uint32_t val); /** * Get value of ModeChTimEn field from the HCFG regsiter */ extern uint32_t dwc_otg_get_mode_ch_tim(dwc_otg_core_if_t * core_if); /** * Set value of ModeChTimEn field from the HCFG regsiter */ extern void dwc_otg_set_mode_ch_tim(dwc_otg_core_if_t * core_if, uint32_t val); /** * Get value of Fram Interval field from the HFIR regsiter */ extern uint32_t dwc_otg_get_fr_interval(dwc_otg_core_if_t * core_if); /** * Set value of Frame Interval field from the HFIR regsiter */ extern void dwc_otg_set_fr_interval(dwc_otg_core_if_t * core_if, uint32_t val); /** * Set value of prtres field from the HPRT0 register *FIXME Remove? */ extern void dwc_otg_set_prtresume(dwc_otg_core_if_t * core_if, uint32_t val); /** * Get value of rmtwkupsig bit in DCTL register */ extern uint32_t dwc_otg_get_remotewakesig(dwc_otg_core_if_t * core_if); /** * Get value of prt_sleep_sts field from the GLPMCFG register */ extern uint32_t dwc_otg_get_lpm_portsleepstatus(dwc_otg_core_if_t * core_if); /** * Get value of rem_wkup_en field from the GLPMCFG register */ extern uint32_t dwc_otg_get_lpm_remotewakeenabled(dwc_otg_core_if_t * core_if); /** * Get value of appl_resp field from the GLPMCFG register */ extern uint32_t dwc_otg_get_lpmresponse(dwc_otg_core_if_t * core_if); /** * Set value of appl_resp field from the GLPMCFG register */ extern void dwc_otg_set_lpmresponse(dwc_otg_core_if_t * core_if, uint32_t val); /** * Get value of hsic_connect field from the GLPMCFG register */ extern uint32_t dwc_otg_get_hsic_connect(dwc_otg_core_if_t * core_if); /** * Set value of hsic_connect field from the GLPMCFG register */ extern void dwc_otg_set_hsic_connect(dwc_otg_core_if_t * core_if, uint32_t val); /** * Get value of inv_sel_hsic field from the GLPMCFG register. */ extern uint32_t dwc_otg_get_inv_sel_hsic(dwc_otg_core_if_t * core_if); /** * Set value of inv_sel_hsic field from the GLPMFG register. */ extern void dwc_otg_set_inv_sel_hsic(dwc_otg_core_if_t * core_if, uint32_t val); /* * Some functions for accessing registers */ /** * GOTGCTL register */ extern uint32_t dwc_otg_get_gotgctl(dwc_otg_core_if_t * core_if); extern void dwc_otg_set_gotgctl(dwc_otg_core_if_t * core_if, uint32_t val); /** * GUSBCFG register */ extern uint32_t dwc_otg_get_gusbcfg(dwc_otg_core_if_t * core_if); extern void dwc_otg_set_gusbcfg(dwc_otg_core_if_t * core_if, uint32_t val); /** * GRXFSIZ register */ extern uint32_t dwc_otg_get_grxfsiz(dwc_otg_core_if_t * core_if); extern void dwc_otg_set_grxfsiz(dwc_otg_core_if_t * core_if, uint32_t val); /** * GNPTXFSIZ register */ extern uint32_t dwc_otg_get_gnptxfsiz(dwc_otg_core_if_t * core_if); extern void dwc_otg_set_gnptxfsiz(dwc_otg_core_if_t * core_if, uint32_t val); extern uint32_t dwc_otg_get_gpvndctl(dwc_otg_core_if_t * core_if); extern void dwc_otg_set_gpvndctl(dwc_otg_core_if_t * core_if, uint32_t val); /** * GGPIO register */ extern uint32_t dwc_otg_get_ggpio(dwc_otg_core_if_t * core_if); extern void dwc_otg_set_ggpio(dwc_otg_core_if_t * core_if, uint32_t val); /** * GUID register */ extern uint32_t dwc_otg_get_guid(dwc_otg_core_if_t * core_if); extern void dwc_otg_set_guid(dwc_otg_core_if_t * core_if, uint32_t val); /** * HPRT0 register */ extern uint32_t dwc_otg_get_hprt0(dwc_otg_core_if_t * core_if); extern void dwc_otg_set_hprt0(dwc_otg_core_if_t * core_if, uint32_t val); /** * GHPTXFSIZE */ extern uint32_t dwc_otg_get_hptxfsiz(dwc_otg_core_if_t * core_if); /** @} */ #endif /* __DWC_CORE_IF_H__ */