From 8e4bff4cab0ddac6060645b0715210484d02ff40 Mon Sep 17 00:00:00 2001
From: Yuval Adam <_@yuv.al>
Date: Wed, 30 Aug 2017 08:25:59 +0000
Subject: Initial file dump from open source release

---
 drivers/video/sprdfb/Makefile | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)
 create mode 100644 drivers/video/sprdfb/Makefile

(limited to 'drivers/video/sprdfb/Makefile')

diff --git a/drivers/video/sprdfb/Makefile b/drivers/video/sprdfb/Makefile
new file mode 100644
index 00000000..f54afdcc
--- /dev/null
+++ b/drivers/video/sprdfb/Makefile
@@ -0,0 +1,35 @@
+obj-$(CONFIG_FB_SCX35) := sprdfb_main.o sprdfb_panel.o sprdfb_dispc.o sprdfb_mcu.o sprdfb_rgb.o sprdfb_mipi.o sprdfb_i2c.o sprdfb_spi.o sprdfb_dsi.o  sprdfb_chip_common.o sprdfb_chip_8830.o
+obj-$(CONFIG_FB_SCX35) += dsi_1_10a/
+obj-$(CONFIG_FB_SCX35) += spi/
+obj-$(CONFIG_FB_SCX35) += lcd/
+
+obj-$(CONFIG_FB_SCX30G) := sprdfb_main.o sprdfb_panel.o sprdfb_dispc.o sprdfb_mcu.o sprdfb_rgb.o sprdfb_mipi.o sprdfb_i2c.o sprdfb_spi.o sprdfb_dsi.o  sprdfb_chip_common.o sprdfb_chip_8830.o
+obj-$(CONFIG_FB_SCX30G) += dsi_1_21a/
+obj-$(CONFIG_FB_SCX30G) += spi/
+obj-$(CONFIG_FB_SCX30G) += lcd/
+obj-$(CONFIG_FB_SCX15) := sprdfb_main.o sprdfb_panel.o sprdfb_dispc.o sprdfb_mcu.o sprdfb_rgb.o sprdfb_i2c.o sprdfb_spi.o sprdfb_chip_common.o sprdfb_chip_7715.o
+obj-$(CONFIG_FB_SCX15) += spi/
+obj-$(CONFIG_FB_SCX15) += lcd/
+obj-$(CONFIG_FB_DYNAMIC_FPS_SUPPORT) += sprdfb_notifier.o
+
+# ========== SharkL/TSharkL configuration begin ===========
+ifeq ($(CONFIG_FB_SCX35L), y)
+obj-y := sprdfb_main.o sprdfb_panel.o sprdfb_dispc.o
+obj-y += sprdfb_dsi.o sprdfb_mipi.o sprdfb_rgb.o sprdfb_mcu.o
+obj-y += sprdfb_chip_common.o sprdfb_chip_9630.o
+obj-$(CONFIG_I2C) += sprdfb_i2c.o
+obj-$(CONFIG_SPI) += sprdfb_spi.o
+endif
+
+ifeq ($(CONFIG_SC_FPGA), y)
+obj-$(CONFIG_FB_SCX35L) += sprdfb_gpio2spi.o
+endif
+
+obj-$(CONFIG_FB_SCX35L) += dsi_1_21a/
+obj-$(CONFIG_FB_SCX35L) += spi/
+obj-$(CONFIG_FB_SCX35L) += lcd/
+# ========== SharkL/TSharkL configuration end ============
+
+# This file is used for creating file node
+obj-y += sprdfb_attr.o
+
-- 
cgit v1.3.1