From 8e4bff4cab0ddac6060645b0715210484d02ff40 Mon Sep 17 00:00:00 2001
From: Yuval Adam <_@yuv.al>
Date: Wed, 30 Aug 2017 08:25:59 +0000
Subject: Initial file dump from open source release

---
 drivers/video/s3c-fb.c | 2049 ++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 2049 insertions(+)
 create mode 100644 drivers/video/s3c-fb.c

(limited to 'drivers/video/s3c-fb.c')

diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
new file mode 100644
index 00000000..2e7991c7
--- /dev/null
+++ b/drivers/video/s3c-fb.c
@@ -0,0 +1,2049 @@
+/* linux/drivers/video/s3c-fb.c
+ *
+ * Copyright 2008 Openmoko Inc.
+ * Copyright 2008-2010 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * Samsung SoC Framebuffer driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software FoundatIon.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/fb.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/interrupt.h>
+#include <linux/pm_runtime.h>
+#include <linux/platform_data/video_s3c.h>
+
+#include <video/samsung_fimd.h>
+
+/* This driver will export a number of framebuffer interfaces depending
+ * on the configuration passed in via the platform data. Each fb instance
+ * maps to a hardware window. Currently there is no support for runtime
+ * setting of the alpha-blending functions that each window has, so only
+ * window 0 is actually useful.
+ *
+ * Window 0 is treated specially, it is used for the basis of the LCD
+ * output timings and as the control for the output power-down state.
+*/
+
+/* note, the previous use of <mach/regs-fb.h> to get platform specific data
+ * has been replaced by using the platform device name to pick the correct
+ * configuration data for the system.
+*/
+
+#ifdef CONFIG_FB_S3C_DEBUG_REGWRITE
+#undef writel
+#define writel(v, r) do { \
+	pr_debug("%s: %08x => %p\n", __func__, (unsigned int)v, r); \
+	__raw_writel(v, r); \
+} while (0)
+#endif /* FB_S3C_DEBUG_REGWRITE */
+
+/* irq_flags bits */
+#define S3C_FB_VSYNC_IRQ_EN	0
+
+#define VSYNC_TIMEOUT_MSEC 50
+
+struct s3c_fb;
+
+#define VALID_BPP(x) (1 << ((x) - 1))
+
+#define OSD_BASE(win, variant) ((variant).osd + ((win) * (variant).osd_stride))
+#define VIDOSD_A(win, variant) (OSD_BASE(win, variant) + 0x00)
+#define VIDOSD_B(win, variant) (OSD_BASE(win, variant) + 0x04)
+#define VIDOSD_C(win, variant) (OSD_BASE(win, variant) + 0x08)
+#define VIDOSD_D(win, variant) (OSD_BASE(win, variant) + 0x0C)
+
+/**
+ * struct s3c_fb_variant - fb variant information
+ * @is_2443: Set if S3C2443/S3C2416 style hardware.
+ * @nr_windows: The number of windows.
+ * @vidtcon: The base for the VIDTCONx registers
+ * @wincon: The base for the WINxCON registers.
+ * @winmap: The base for the WINxMAP registers.
+ * @keycon: The abse for the WxKEYCON registers.
+ * @buf_start: Offset of buffer start registers.
+ * @buf_size: Offset of buffer size registers.
+ * @buf_end: Offset of buffer end registers.
+ * @osd: The base for the OSD registers.
+ * @palette: Address of palette memory, or 0 if none.
+ * @has_prtcon: Set if has PRTCON register.
+ * @has_shadowcon: Set if has SHADOWCON register.
+ * @has_blendcon: Set if has BLENDCON register.
+ * @has_clksel: Set if VIDCON0 register has CLKSEL bit.
+ * @has_fixvclk: Set if VIDCON1 register has FIXVCLK bits.
+ */
+struct s3c_fb_variant {
+	unsigned int	is_2443:1;
+	unsigned short	nr_windows;
+	unsigned int	vidtcon;
+	unsigned short	wincon;
+	unsigned short	winmap;
+	unsigned short	keycon;
+	unsigned short	buf_start;
+	unsigned short	buf_end;
+	unsigned short	buf_size;
+	unsigned short	osd;
+	unsigned short	osd_stride;
+	unsigned short	palette[S3C_FB_MAX_WIN];
+
+	unsigned int	has_prtcon:1;
+	unsigned int	has_shadowcon:1;
+	unsigned int	has_blendcon:1;
+	unsigned int	has_clksel:1;
+	unsigned int	has_fixvclk:1;
+};
+
+/**
+ * struct s3c_fb_win_variant
+ * @has_osd_c: Set if has OSD C register.
+ * @has_osd_d: Set if has OSD D register.
+ * @has_osd_alpha: Set if can change alpha transparency for a window.
+ * @palette_sz: Size of palette in entries.
+ * @palette_16bpp: Set if palette is 16bits wide.
+ * @osd_size_off: If != 0, supports setting up OSD for a window; the appropriate
+ *                register is located at the given offset from OSD_BASE.
+ * @valid_bpp: 1 bit per BPP setting to show valid bits-per-pixel.
+ *
+ * valid_bpp bit x is set if (x+1)BPP is supported.
+ */
+struct s3c_fb_win_variant {
+	unsigned int	has_osd_c:1;
+	unsigned int	has_osd_d:1;
+	unsigned int	has_osd_alpha:1;
+	unsigned int	palette_16bpp:1;
+	unsigned short	osd_size_off;
+	unsigned short	palette_sz;
+	u32		valid_bpp;
+};
+
+/**
+ * struct s3c_fb_driverdata - per-device type driver data for init time.
+ * @variant: The variant information for this driver.
+ * @win: The window information for each window.
+ */
+struct s3c_fb_driverdata {
+	struct s3c_fb_variant	variant;
+	struct s3c_fb_win_variant *win[S3C_FB_MAX_WIN];
+};
+
+/**
+ * struct s3c_fb_palette - palette information
+ * @r: Red bitfield.
+ * @g: Green bitfield.
+ * @b: Blue bitfield.
+ * @a: Alpha bitfield.
+ */
+struct s3c_fb_palette {
+	struct fb_bitfield	r;
+	struct fb_bitfield	g;
+	struct fb_bitfield	b;
+	struct fb_bitfield	a;
+};
+
+/**
+ * struct s3c_fb_win - per window private data for each framebuffer.
+ * @windata: The platform data supplied for the window configuration.
+ * @parent: The hardware that this window is part of.
+ * @fbinfo: Pointer pack to the framebuffer info for this window.
+ * @varint: The variant information for this window.
+ * @palette_buffer: Buffer/cache to hold palette entries.
+ * @pseudo_palette: For use in TRUECOLOUR modes for entries 0..15/
+ * @index: The window number of this window.
+ * @palette: The bitfields for changing r/g/b into a hardware palette entry.
+ */
+struct s3c_fb_win {
+	struct s3c_fb_pd_win	*windata;
+	struct s3c_fb		*parent;
+	struct fb_info		*fbinfo;
+	struct s3c_fb_palette	 palette;
+	struct s3c_fb_win_variant variant;
+
+	u32			*palette_buffer;
+	u32			 pseudo_palette[16];
+	unsigned int		 index;
+};
+
+/**
+ * struct s3c_fb_vsync - vsync information
+ * @wait:	a queue for processes waiting for vsync
+ * @count:	vsync interrupt count
+ */
+struct s3c_fb_vsync {
+	wait_queue_head_t	wait;
+	unsigned int		count;
+};
+
+/**
+ * struct s3c_fb - overall hardware state of the hardware
+ * @slock: The spinlock protection for this data structure.
+ * @dev: The device that we bound to, for printing, etc.
+ * @bus_clk: The clk (hclk) feeding our interface and possibly pixclk.
+ * @lcd_clk: The clk (sclk) feeding pixclk.
+ * @regs: The mapped hardware registers.
+ * @variant: Variant information for this hardware.
+ * @enabled: A bitmask of enabled hardware windows.
+ * @output_on: Flag if the physical output is enabled.
+ * @pdata: The platform configuration data passed with the device.
+ * @windows: The hardware windows that have been claimed.
+ * @irq_no: IRQ line number
+ * @irq_flags: irq flags
+ * @vsync_info: VSYNC-related information (count, queues...)
+ */
+struct s3c_fb {
+	spinlock_t		slock;
+	struct device		*dev;
+	struct clk		*bus_clk;
+	struct clk		*lcd_clk;
+	void __iomem		*regs;
+	struct s3c_fb_variant	 variant;
+
+	unsigned char		 enabled;
+	bool			 output_on;
+
+	struct s3c_fb_platdata	*pdata;
+	struct s3c_fb_win	*windows[S3C_FB_MAX_WIN];
+
+	int			 irq_no;
+	unsigned long		 irq_flags;
+	struct s3c_fb_vsync	 vsync_info;
+};
+
+/**
+ * s3c_fb_validate_win_bpp - validate the bits-per-pixel for this mode.
+ * @win: The device window.
+ * @bpp: The bit depth.
+ */
+static bool s3c_fb_validate_win_bpp(struct s3c_fb_win *win, unsigned int bpp)
+{
+	return win->variant.valid_bpp & VALID_BPP(bpp);
+}
+
+/**
+ * s3c_fb_check_var() - framebuffer layer request to verify a given mode.
+ * @var: The screen information to verify.
+ * @info: The framebuffer device.
+ *
+ * Framebuffer layer call to verify the given information and allow us to
+ * update various information depending on the hardware capabilities.
+ */
+static int s3c_fb_check_var(struct fb_var_screeninfo *var,
+			    struct fb_info *info)
+{
+	struct s3c_fb_win *win = info->par;
+	struct s3c_fb *sfb = win->parent;
+
+	dev_dbg(sfb->dev, "checking parameters\n");
+
+	var->xres_virtual = max(var->xres_virtual, var->xres);
+	var->yres_virtual = max(var->yres_virtual, var->yres);
+
+	if (!s3c_fb_validate_win_bpp(win, var->bits_per_pixel)) {
+		dev_dbg(sfb->dev, "win %d: unsupported bpp %d\n",
+			win->index, var->bits_per_pixel);
+		return -EINVAL;
+	}
+
+	/* always ensure these are zero, for drop through cases below */
+	var->transp.offset = 0;
+	var->transp.length = 0;
+
+	switch (var->bits_per_pixel) {
+	case 1:
+	case 2:
+	case 4:
+	case 8:
+		if (sfb->variant.palette[win->index] != 0) {
+			/* non palletised, A:1,R:2,G:3,B:2 mode */
+			var->red.offset		= 5;
+			var->green.offset	= 2;
+			var->blue.offset	= 0;
+			var->red.length		= 2;
+			var->green.length	= 3;
+			var->blue.length	= 2;
+			var->transp.offset	= 7;
+			var->transp.length	= 1;
+		} else {
+			var->red.offset	= 0;
+			var->red.length	= var->bits_per_pixel;
+			var->green	= var->red;
+			var->blue	= var->red;
+		}
+		break;
+
+	case 19:
+		/* 666 with one bit alpha/transparency */
+		var->transp.offset	= 18;
+		var->transp.length	= 1;
+		/* drop through */
+	case 18:
+		var->bits_per_pixel	= 32;
+
+		/* 666 format */
+		var->red.offset		= 12;
+		var->green.offset	= 6;
+		var->blue.offset	= 0;
+		var->red.length		= 6;
+		var->green.length	= 6;
+		var->blue.length	= 6;
+		break;
+
+	case 16:
+		/* 16 bpp, 565 format */
+		var->red.offset		= 11;
+		var->green.offset	= 5;
+		var->blue.offset	= 0;
+		var->red.length		= 5;
+		var->green.length	= 6;
+		var->blue.length	= 5;
+		break;
+
+	case 32:
+	case 28:
+	case 25:
+		var->transp.length	= var->bits_per_pixel - 24;
+		var->transp.offset	= 24;
+		/* drop through */
+	case 24:
+		/* our 24bpp is unpacked, so 32bpp */
+		var->bits_per_pixel	= 32;
+		var->red.offset		= 16;
+		var->red.length		= 8;
+		var->green.offset	= 8;
+		var->green.length	= 8;
+		var->blue.offset	= 0;
+		var->blue.length	= 8;
+		break;
+
+	default:
+		dev_err(sfb->dev, "invalid bpp\n");
+		return -EINVAL;
+	}
+
+	dev_dbg(sfb->dev, "%s: verified parameters\n", __func__);
+	return 0;
+}
+
+/**
+ * s3c_fb_calc_pixclk() - calculate the divider to create the pixel clock.
+ * @sfb: The hardware state.
+ * @pixclock: The pixel clock wanted, in picoseconds.
+ *
+ * Given the specified pixel clock, work out the necessary divider to get
+ * close to the output frequency.
+ */
+static int s3c_fb_calc_pixclk(struct s3c_fb *sfb, unsigned int pixclk)
+{
+	unsigned long clk;
+	unsigned long long tmp;
+	unsigned int result;
+
+	if (sfb->variant.has_clksel)
+		clk = clk_get_rate(sfb->bus_clk);
+	else
+		clk = clk_get_rate(sfb->lcd_clk);
+
+	tmp = (unsigned long long)clk;
+	tmp *= pixclk;
+
+	do_div(tmp, 1000000000UL);
+	result = (unsigned int)tmp / 1000;
+
+	dev_dbg(sfb->dev, "pixclk=%u, clk=%lu, div=%d (%lu)\n",
+		pixclk, clk, result, result ? clk / result : clk);
+
+	return result;
+}
+
+/**
+ * s3c_fb_align_word() - align pixel count to word boundary
+ * @bpp: The number of bits per pixel
+ * @pix: The value to be aligned.
+ *
+ * Align the given pixel count so that it will start on an 32bit word
+ * boundary.
+ */
+static int s3c_fb_align_word(unsigned int bpp, unsigned int pix)
+{
+	int pix_per_word;
+
+	if (bpp > 16)
+		return pix;
+
+	pix_per_word = (8 * 32) / bpp;
+	return ALIGN(pix, pix_per_word);
+}
+
+/**
+ * vidosd_set_size() - set OSD size for a window
+ *
+ * @win: the window to set OSD size for
+ * @size: OSD size register value
+ */
+static void vidosd_set_size(struct s3c_fb_win *win, u32 size)
+{
+	struct s3c_fb *sfb = win->parent;
+
+	/* OSD can be set up if osd_size_off != 0 for this window */
+	if (win->variant.osd_size_off)
+		writel(size, sfb->regs + OSD_BASE(win->index, sfb->variant)
+				+ win->variant.osd_size_off);
+}
+
+/**
+ * vidosd_set_alpha() - set alpha transparency for a window
+ *
+ * @win: the window to set OSD size for
+ * @alpha: alpha register value
+ */
+static void vidosd_set_alpha(struct s3c_fb_win *win, u32 alpha)
+{
+	struct s3c_fb *sfb = win->parent;
+
+	if (win->variant.has_osd_alpha)
+		writel(alpha, sfb->regs + VIDOSD_C(win->index, sfb->variant));
+}
+
+/**
+ * shadow_protect_win() - disable updating values from shadow registers at vsync
+ *
+ * @win: window to protect registers for
+ * @protect: 1 to protect (disable updates)
+ */
+static void shadow_protect_win(struct s3c_fb_win *win, bool protect)
+{
+	struct s3c_fb *sfb = win->parent;
+	u32 reg;
+
+	if (protect) {
+		if (sfb->variant.has_prtcon) {
+			writel(PRTCON_PROTECT, sfb->regs + PRTCON);
+		} else if (sfb->variant.has_shadowcon) {
+			reg = readl(sfb->regs + SHADOWCON);
+			writel(reg | SHADOWCON_WINx_PROTECT(win->index),
+				sfb->regs + SHADOWCON);
+		}
+	} else {
+		if (sfb->variant.has_prtcon) {
+			writel(0, sfb->regs + PRTCON);
+		} else if (sfb->variant.has_shadowcon) {
+			reg = readl(sfb->regs + SHADOWCON);
+			writel(reg & ~SHADOWCON_WINx_PROTECT(win->index),
+				sfb->regs + SHADOWCON);
+		}
+	}
+}
+
+/**
+ * s3c_fb_enable() - Set the state of the main LCD output
+ * @sfb: The main framebuffer state.
+ * @enable: The state to set.
+ */
+static void s3c_fb_enable(struct s3c_fb *sfb, int enable)
+{
+	u32 vidcon0 = readl(sfb->regs + VIDCON0);
+
+	if (enable && !sfb->output_on)
+		pm_runtime_get_sync(sfb->dev);
+
+	if (enable) {
+		vidcon0 |= VIDCON0_ENVID | VIDCON0_ENVID_F;
+	} else {
+		/* see the note in the framebuffer datasheet about
+		 * why you cannot take both of these bits down at the
+		 * same time. */
+
+		if (vidcon0 & VIDCON0_ENVID) {
+			vidcon0 |= VIDCON0_ENVID;
+			vidcon0 &= ~VIDCON0_ENVID_F;
+		}
+	}
+
+	writel(vidcon0, sfb->regs + VIDCON0);
+
+	if (!enable && sfb->output_on)
+		pm_runtime_put_sync(sfb->dev);
+
+	sfb->output_on = enable;
+}
+
+/**
+ * s3c_fb_set_par() - framebuffer request to set new framebuffer state.
+ * @info: The framebuffer to change.
+ *
+ * Framebuffer layer request to set a new mode for the specified framebuffer
+ */
+static int s3c_fb_set_par(struct fb_info *info)
+{
+	struct fb_var_screeninfo *var = &info->var;
+	struct s3c_fb_win *win = info->par;
+	struct s3c_fb *sfb = win->parent;
+	void __iomem *regs = sfb->regs;
+	void __iomem *buf = regs;
+	int win_no = win->index;
+	u32 alpha = 0;
+	u32 data;
+	u32 pagewidth;
+
+	dev_dbg(sfb->dev, "setting framebuffer parameters\n");
+
+	pm_runtime_get_sync(sfb->dev);
+
+	shadow_protect_win(win, 1);
+
+	switch (var->bits_per_pixel) {
+	case 32:
+	case 24:
+	case 16:
+	case 12:
+		info->fix.visual = FB_VISUAL_TRUECOLOR;
+		break;
+	case 8:
+		if (win->variant.palette_sz >= 256)
+			info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+		else
+			info->fix.visual = FB_VISUAL_TRUECOLOR;
+		break;
+	case 1:
+		info->fix.visual = FB_VISUAL_MONO01;
+		break;
+	default:
+		info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+		break;
+	}
+
+	info->fix.line_length = (var->xres_virtual * var->bits_per_pixel) / 8;
+
+	info->fix.xpanstep = info->var.xres_virtual > info->var.xres ? 1 : 0;
+	info->fix.ypanstep = info->var.yres_virtual > info->var.yres ? 1 : 0;
+
+	/* disable the window whilst we update it */
+	writel(0, regs + WINCON(win_no));
+
+	if (!sfb->output_on)
+		s3c_fb_enable(sfb, 1);
+
+	/* write the buffer address */
+
+	/* start and end registers stride is 8 */
+	buf = regs + win_no * 8;
+
+	writel(info->fix.smem_start, buf + sfb->variant.buf_start);
+
+	data = info->fix.smem_start + info->fix.line_length * var->yres;
+	writel(data, buf + sfb->variant.buf_end);
+
+	pagewidth = (var->xres * var->bits_per_pixel) >> 3;
+	data = VIDW_BUF_SIZE_OFFSET(info->fix.line_length - pagewidth) |
+	       VIDW_BUF_SIZE_PAGEWIDTH(pagewidth) |
+	       VIDW_BUF_SIZE_OFFSET_E(info->fix.line_length - pagewidth) |
+	       VIDW_BUF_SIZE_PAGEWIDTH_E(pagewidth);
+	writel(data, regs + sfb->variant.buf_size + (win_no * 4));
+
+	/* write 'OSD' registers to control position of framebuffer */
+
+	data = VIDOSDxA_TOPLEFT_X(0) | VIDOSDxA_TOPLEFT_Y(0) |
+	       VIDOSDxA_TOPLEFT_X_E(0) | VIDOSDxA_TOPLEFT_Y_E(0);
+	writel(data, regs + VIDOSD_A(win_no, sfb->variant));
+
+	data = VIDOSDxB_BOTRIGHT_X(s3c_fb_align_word(var->bits_per_pixel,
+						     var->xres - 1)) |
+	       VIDOSDxB_BOTRIGHT_Y(var->yres - 1) |
+	       VIDOSDxB_BOTRIGHT_X_E(s3c_fb_align_word(var->bits_per_pixel,
+						     var->xres - 1)) |
+	       VIDOSDxB_BOTRIGHT_Y_E(var->yres - 1);
+
+	writel(data, regs + VIDOSD_B(win_no, sfb->variant));
+
+	data = var->xres * var->yres;
+
+	alpha = VIDISD14C_ALPHA1_R(0xf) |
+		VIDISD14C_ALPHA1_G(0xf) |
+		VIDISD14C_ALPHA1_B(0xf);
+
+	vidosd_set_alpha(win, alpha);
+	vidosd_set_size(win, data);
+
+	/* Enable DMA channel for this window */
+	if (sfb->variant.has_shadowcon) {
+		data = readl(sfb->regs + SHADOWCON);
+		data |= SHADOWCON_CHx_ENABLE(win_no);
+		writel(data, sfb->regs + SHADOWCON);
+	}
+
+	data = WINCONx_ENWIN;
+	sfb->enabled |= (1 << win->index);
+
+	/* note, since we have to round up the bits-per-pixel, we end up
+	 * relying on the bitfield information for r/g/b/a to work out
+	 * exactly which mode of operation is intended. */
+
+	switch (var->bits_per_pixel) {
+	case 1:
+		data |= WINCON0_BPPMODE_1BPP;
+		data |= WINCONx_BITSWP;
+		data |= WINCONx_BURSTLEN_4WORD;
+		break;
+	case 2:
+		data |= WINCON0_BPPMODE_2BPP;
+		data |= WINCONx_BITSWP;
+		data |= WINCONx_BURSTLEN_8WORD;
+		break;
+	case 4:
+		data |= WINCON0_BPPMODE_4BPP;
+		data |= WINCONx_BITSWP;
+		data |= WINCONx_BURSTLEN_8WORD;
+		break;
+	case 8:
+		if (var->transp.length != 0)
+			data |= WINCON1_BPPMODE_8BPP_1232;
+		else
+			data |= WINCON0_BPPMODE_8BPP_PALETTE;
+		data |= WINCONx_BURSTLEN_8WORD;
+		data |= WINCONx_BYTSWP;
+		break;
+	case 16:
+		if (var->transp.length != 0)
+			data |= WINCON1_BPPMODE_16BPP_A1555;
+		else
+			data |= WINCON0_BPPMODE_16BPP_565;
+		data |= WINCONx_HAWSWP;
+		data |= WINCONx_BURSTLEN_16WORD;
+		break;
+	case 24:
+	case 32:
+		if (var->red.length == 6) {
+			if (var->transp.length != 0)
+				data |= WINCON1_BPPMODE_19BPP_A1666;
+			else
+				data |= WINCON1_BPPMODE_18BPP_666;
+		} else if (var->transp.length == 1)
+			data |= WINCON1_BPPMODE_25BPP_A1888
+				| WINCON1_BLD_PIX;
+		else if ((var->transp.length == 4) ||
+			(var->transp.length == 8))
+			data |= WINCON1_BPPMODE_28BPP_A4888
+				| WINCON1_BLD_PIX | WINCON1_ALPHA_SEL;
+		else
+			data |= WINCON0_BPPMODE_24BPP_888;
+
+		data |= WINCONx_WSWP;
+		data |= WINCONx_BURSTLEN_16WORD;
+		break;
+	}
+
+	/* Enable the colour keying for the window below this one */
+	if (win_no > 0) {
+		u32 keycon0_data = 0, keycon1_data = 0;
+		void __iomem *keycon = regs + sfb->variant.keycon;
+
+		keycon0_data = ~(WxKEYCON0_KEYBL_EN |
+				WxKEYCON0_KEYEN_F |
+				WxKEYCON0_DIRCON) | WxKEYCON0_COMPKEY(0);
+
+		keycon1_data = WxKEYCON1_COLVAL(0xffffff);
+
+		keycon += (win_no - 1) * 8;
+
+		writel(keycon0_data, keycon + WKEYCON0);
+		writel(keycon1_data, keycon + WKEYCON1);
+	}
+
+	writel(data, regs + sfb->variant.wincon + (win_no * 4));
+	writel(0x0, regs + sfb->variant.winmap + (win_no * 4));
+
+	/* Set alpha value width */
+	if (sfb->variant.has_blendcon) {
+		data = readl(sfb->regs + BLENDCON);
+		data &= ~BLENDCON_NEW_MASK;
+		if (var->transp.length > 4)
+			data |= BLENDCON_NEW_8BIT_ALPHA_VALUE;
+		else
+			data |= BLENDCON_NEW_4BIT_ALPHA_VALUE;
+		writel(data, sfb->regs + BLENDCON);
+	}
+
+	shadow_protect_win(win, 0);
+
+	pm_runtime_put_sync(sfb->dev);
+
+	return 0;
+}
+
+/**
+ * s3c_fb_update_palette() - set or schedule a palette update.
+ * @sfb: The hardware information.
+ * @win: The window being updated.
+ * @reg: The palette index being changed.
+ * @value: The computed palette value.
+ *
+ * Change the value of a palette register, either by directly writing to
+ * the palette (this requires the palette RAM to be disconnected from the
+ * hardware whilst this is in progress) or schedule the update for later.
+ *
+ * At the moment, since we have no VSYNC interrupt support, we simply set
+ * the palette entry directly.
+ */
+static void s3c_fb_update_palette(struct s3c_fb *sfb,
+				  struct s3c_fb_win *win,
+				  unsigned int reg,
+				  u32 value)
+{
+	void __iomem *palreg;
+	u32 palcon;
+
+	palreg = sfb->regs + sfb->variant.palette[win->index];
+
+	dev_dbg(sfb->dev, "%s: win %d, reg %d (%p): %08x\n",
+		__func__, win->index, reg, palreg, value);
+
+	win->palette_buffer[reg] = value;
+
+	palcon = readl(sfb->regs + WPALCON);
+	writel(palcon | WPALCON_PAL_UPDATE, sfb->regs + WPALCON);
+
+	if (win->variant.palette_16bpp)
+		writew(value, palreg + (reg * 2));
+	else
+		writel(value, palreg + (reg * 4));
+
+	writel(palcon, sfb->regs + WPALCON);
+}
+
+static inline unsigned int chan_to_field(unsigned int chan,
+					 struct fb_bitfield *bf)
+{
+	chan &= 0xffff;
+	chan >>= 16 - bf->length;
+	return chan << bf->offset;
+}
+
+/**
+ * s3c_fb_setcolreg() - framebuffer layer request to change palette.
+ * @regno: The palette index to change.
+ * @red: The red field for the palette data.
+ * @green: The green field for the palette data.
+ * @blue: The blue field for the palette data.
+ * @trans: The transparency (alpha) field for the palette data.
+ * @info: The framebuffer being changed.
+ */
+static int s3c_fb_setcolreg(unsigned regno,
+			    unsigned red, unsigned green, unsigned blue,
+			    unsigned transp, struct fb_info *info)
+{
+	struct s3c_fb_win *win = info->par;
+	struct s3c_fb *sfb = win->parent;
+	unsigned int val;
+
+	dev_dbg(sfb->dev, "%s: win %d: %d => rgb=%d/%d/%d\n",
+		__func__, win->index, regno, red, green, blue);
+
+	pm_runtime_get_sync(sfb->dev);
+
+	switch (info->fix.visual) {
+	case FB_VISUAL_TRUECOLOR:
+		/* true-colour, use pseudo-palette */
+
+		if (regno < 16) {
+			u32 *pal = info->pseudo_palette;
+
+			val  = chan_to_field(red,   &info->var.red);
+			val |= chan_to_field(green, &info->var.green);
+			val |= chan_to_field(blue,  &info->var.blue);
+
+			pal[regno] = val;
+		}
+		break;
+
+	case FB_VISUAL_PSEUDOCOLOR:
+		if (regno < win->variant.palette_sz) {
+			val  = chan_to_field(red, &win->palette.r);
+			val |= chan_to_field(green, &win->palette.g);
+			val |= chan_to_field(blue, &win->palette.b);
+
+			s3c_fb_update_palette(sfb, win, regno, val);
+		}
+
+		break;
+
+	default:
+		pm_runtime_put_sync(sfb->dev);
+		return 1;	/* unknown type */
+	}
+
+	pm_runtime_put_sync(sfb->dev);
+	return 0;
+}
+
+/**
+ * s3c_fb_blank() - blank or unblank the given window
+ * @blank_mode: The blank state from FB_BLANK_*
+ * @info: The framebuffer to blank.
+ *
+ * Framebuffer layer request to change the power state.
+ */
+static int s3c_fb_blank(int blank_mode, struct fb_info *info)
+{
+	struct s3c_fb_win *win = info->par;
+	struct s3c_fb *sfb = win->parent;
+	unsigned int index = win->index;
+	u32 wincon;
+	u32 output_on = sfb->output_on;
+
+	dev_dbg(sfb->dev, "blank mode %d\n", blank_mode);
+
+	pm_runtime_get_sync(sfb->dev);
+
+	wincon = readl(sfb->regs + sfb->variant.wincon + (index * 4));
+
+	switch (blank_mode) {
+	case FB_BLANK_POWERDOWN:
+		wincon &= ~WINCONx_ENWIN;
+		sfb->enabled &= ~(1 << index);
+		/* fall through to FB_BLANK_NORMAL */
+
+	case FB_BLANK_NORMAL:
+		/* disable the DMA and display 0x0 (black) */
+		shadow_protect_win(win, 1);
+		writel(WINxMAP_MAP | WINxMAP_MAP_COLOUR(0x0),
+		       sfb->regs + sfb->variant.winmap + (index * 4));
+		shadow_protect_win(win, 0);
+		break;
+
+	case FB_BLANK_UNBLANK:
+		shadow_protect_win(win, 1);
+		writel(0x0, sfb->regs + sfb->variant.winmap + (index * 4));
+		shadow_protect_win(win, 0);
+		wincon |= WINCONx_ENWIN;
+		sfb->enabled |= (1 << index);
+		break;
+
+	case FB_BLANK_VSYNC_SUSPEND:
+	case FB_BLANK_HSYNC_SUSPEND:
+	default:
+		pm_runtime_put_sync(sfb->dev);
+		return 1;
+	}
+
+	shadow_protect_win(win, 1);
+	writel(wincon, sfb->regs + sfb->variant.wincon + (index * 4));
+
+	/* Check the enabled state to see if we need to be running the
+	 * main LCD interface, as if there are no active windows then
+	 * it is highly likely that we also do not need to output
+	 * anything.
+	 */
+	s3c_fb_enable(sfb, sfb->enabled ? 1 : 0);
+	shadow_protect_win(win, 0);
+
+	pm_runtime_put_sync(sfb->dev);
+
+	return output_on == sfb->output_on;
+}
+
+/**
+ * s3c_fb_pan_display() - Pan the display.
+ *
+ * Note that the offsets can be written to the device at any time, as their
+ * values are latched at each vsync automatically. This also means that only
+ * the last call to this function will have any effect on next vsync, but
+ * there is no need to sleep waiting for it to prevent tearing.
+ *
+ * @var: The screen information to verify.
+ * @info: The framebuffer device.
+ */
+static int s3c_fb_pan_display(struct fb_var_screeninfo *var,
+			      struct fb_info *info)
+{
+	struct s3c_fb_win *win	= info->par;
+	struct s3c_fb *sfb	= win->parent;
+	void __iomem *buf	= sfb->regs + win->index * 8;
+	unsigned int start_boff, end_boff;
+
+	pm_runtime_get_sync(sfb->dev);
+
+	/* Offset in bytes to the start of the displayed area */
+	start_boff = var->yoffset * info->fix.line_length;
+	/* X offset depends on the current bpp */
+	if (info->var.bits_per_pixel >= 8) {
+		start_boff += var->xoffset * (info->var.bits_per_pixel >> 3);
+	} else {
+		switch (info->var.bits_per_pixel) {
+		case 4:
+			start_boff += var->xoffset >> 1;
+			break;
+		case 2:
+			start_boff += var->xoffset >> 2;
+			break;
+		case 1:
+			start_boff += var->xoffset >> 3;
+			break;
+		default:
+			dev_err(sfb->dev, "invalid bpp\n");
+			pm_runtime_put_sync(sfb->dev);
+			return -EINVAL;
+		}
+	}
+	/* Offset in bytes to the end of the displayed area */
+	end_boff = start_boff + info->var.yres * info->fix.line_length;
+
+	/* Temporarily turn off per-vsync update from shadow registers until
+	 * both start and end addresses are updated to prevent corruption */
+	shadow_protect_win(win, 1);
+
+	writel(info->fix.smem_start + start_boff, buf + sfb->variant.buf_start);
+	writel(info->fix.smem_start + end_boff, buf + sfb->variant.buf_end);
+
+	shadow_protect_win(win, 0);
+
+	pm_runtime_put_sync(sfb->dev);
+	return 0;
+}
+
+/**
+ * s3c_fb_enable_irq() - enable framebuffer interrupts
+ * @sfb: main hardware state
+ */
+static void s3c_fb_enable_irq(struct s3c_fb *sfb)
+{
+	void __iomem *regs = sfb->regs;
+	u32 irq_ctrl_reg;
+
+	if (!test_and_set_bit(S3C_FB_VSYNC_IRQ_EN, &sfb->irq_flags)) {
+		/* IRQ disabled, enable it */
+		irq_ctrl_reg = readl(regs + VIDINTCON0);
+
+		irq_ctrl_reg |= VIDINTCON0_INT_ENABLE;
+		irq_ctrl_reg |= VIDINTCON0_INT_FRAME;
+
+		irq_ctrl_reg &= ~VIDINTCON0_FRAMESEL0_MASK;
+		irq_ctrl_reg |= VIDINTCON0_FRAMESEL0_VSYNC;
+		irq_ctrl_reg &= ~VIDINTCON0_FRAMESEL1_MASK;
+		irq_ctrl_reg |= VIDINTCON0_FRAMESEL1_NONE;
+
+		writel(irq_ctrl_reg, regs + VIDINTCON0);
+	}
+}
+
+/**
+ * s3c_fb_disable_irq() - disable framebuffer interrupts
+ * @sfb: main hardware state
+ */
+static void s3c_fb_disable_irq(struct s3c_fb *sfb)
+{
+	void __iomem *regs = sfb->regs;
+	u32 irq_ctrl_reg;
+
+	if (test_and_clear_bit(S3C_FB_VSYNC_IRQ_EN, &sfb->irq_flags)) {
+		/* IRQ enabled, disable it */
+		irq_ctrl_reg = readl(regs + VIDINTCON0);
+
+		irq_ctrl_reg &= ~VIDINTCON0_INT_FRAME;
+		irq_ctrl_reg &= ~VIDINTCON0_INT_ENABLE;
+
+		writel(irq_ctrl_reg, regs + VIDINTCON0);
+	}
+}
+
+static irqreturn_t s3c_fb_irq(int irq, void *dev_id)
+{
+	struct s3c_fb *sfb = dev_id;
+	void __iomem  *regs = sfb->regs;
+	u32 irq_sts_reg;
+
+	spin_lock(&sfb->slock);
+
+	irq_sts_reg = readl(regs + VIDINTCON1);
+
+	if (irq_sts_reg & VIDINTCON1_INT_FRAME) {
+
+		/* VSYNC interrupt, accept it */
+		writel(VIDINTCON1_INT_FRAME, regs + VIDINTCON1);
+
+		sfb->vsync_info.count++;
+		wake_up_interruptible(&sfb->vsync_info.wait);
+	}
+
+	/* We only support waiting for VSYNC for now, so it's safe
+	 * to always disable irqs here.
+	 */
+	s3c_fb_disable_irq(sfb);
+
+	spin_unlock(&sfb->slock);
+	return IRQ_HANDLED;
+}
+
+/**
+ * s3c_fb_wait_for_vsync() - sleep until next VSYNC interrupt or timeout
+ * @sfb: main hardware state
+ * @crtc: head index.
+ */
+static int s3c_fb_wait_for_vsync(struct s3c_fb *sfb, u32 crtc)
+{
+	unsigned long count;
+	int ret;
+
+	if (crtc != 0)
+		return -ENODEV;
+
+	pm_runtime_get_sync(sfb->dev);
+
+	count = sfb->vsync_info.count;
+	s3c_fb_enable_irq(sfb);
+	ret = wait_event_interruptible_timeout(sfb->vsync_info.wait,
+				       count != sfb->vsync_info.count,
+				       msecs_to_jiffies(VSYNC_TIMEOUT_MSEC));
+
+	pm_runtime_put_sync(sfb->dev);
+
+	if (ret == 0)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static int s3c_fb_ioctl(struct fb_info *info, unsigned int cmd,
+			unsigned long arg)
+{
+	struct s3c_fb_win *win = info->par;
+	struct s3c_fb *sfb = win->parent;
+	int ret;
+	u32 crtc;
+
+	switch (cmd) {
+	case FBIO_WAITFORVSYNC:
+		if (get_user(crtc, (u32 __user *)arg)) {
+			ret = -EFAULT;
+			break;
+		}
+
+		ret = s3c_fb_wait_for_vsync(sfb, crtc);
+		break;
+	default:
+		ret = -ENOTTY;
+	}
+
+	return ret;
+}
+
+static struct fb_ops s3c_fb_ops = {
+	.owner		= THIS_MODULE,
+	.fb_check_var	= s3c_fb_check_var,
+	.fb_set_par	= s3c_fb_set_par,
+	.fb_blank	= s3c_fb_blank,
+	.fb_setcolreg	= s3c_fb_setcolreg,
+	.fb_fillrect	= cfb_fillrect,
+	.fb_copyarea	= cfb_copyarea,
+	.fb_imageblit	= cfb_imageblit,
+	.fb_pan_display	= s3c_fb_pan_display,
+	.fb_ioctl	= s3c_fb_ioctl,
+};
+
+/**
+ * s3c_fb_missing_pixclock() - calculates pixel clock
+ * @mode: The video mode to change.
+ *
+ * Calculate the pixel clock when none has been given through platform data.
+ */
+static void s3c_fb_missing_pixclock(struct fb_videomode *mode)
+{
+	u64 pixclk = 1000000000000ULL;
+	u32 div;
+
+	div  = mode->left_margin + mode->hsync_len + mode->right_margin +
+	       mode->xres;
+	div *= mode->upper_margin + mode->vsync_len + mode->lower_margin +
+	       mode->yres;
+	div *= mode->refresh ? : 60;
+
+	do_div(pixclk, div);
+
+	mode->pixclock = pixclk;
+}
+
+/**
+ * s3c_fb_alloc_memory() - allocate display memory for framebuffer window
+ * @sfb: The base resources for the hardware.
+ * @win: The window to initialise memory for.
+ *
+ * Allocate memory for the given framebuffer.
+ */
+static int s3c_fb_alloc_memory(struct s3c_fb *sfb, struct s3c_fb_win *win)
+{
+	struct s3c_fb_pd_win *windata = win->windata;
+	unsigned int real_size, virt_size, size;
+	struct fb_info *fbi = win->fbinfo;
+	dma_addr_t map_dma;
+
+	dev_dbg(sfb->dev, "allocating memory for display\n");
+
+	real_size = windata->xres * windata->yres;
+	virt_size = windata->virtual_x * windata->virtual_y;
+
+	dev_dbg(sfb->dev, "real_size=%u (%u.%u), virt_size=%u (%u.%u)\n",
+		real_size, windata->xres, windata->yres,
+		virt_size, windata->virtual_x, windata->virtual_y);
+
+	size = (real_size > virt_size) ? real_size : virt_size;
+	size *= (windata->max_bpp > 16) ? 32 : windata->max_bpp;
+	size /= 8;
+
+	fbi->fix.smem_len = size;
+	size = PAGE_ALIGN(size);
+
+	dev_dbg(sfb->dev, "want %u bytes for window\n", size);
+
+	fbi->screen_base = dma_alloc_writecombine(sfb->dev, size,
+						  &map_dma, GFP_KERNEL);
+	if (!fbi->screen_base)
+		return -ENOMEM;
+
+	dev_dbg(sfb->dev, "mapped %x to %p\n",
+		(unsigned int)map_dma, fbi->screen_base);
+
+	memset(fbi->screen_base, 0x0, size);
+	fbi->fix.smem_start = map_dma;
+
+	return 0;
+}
+
+/**
+ * s3c_fb_free_memory() - free the display memory for the given window
+ * @sfb: The base resources for the hardware.
+ * @win: The window to free the display memory for.
+ *
+ * Free the display memory allocated by s3c_fb_alloc_memory().
+ */
+static void s3c_fb_free_memory(struct s3c_fb *sfb, struct s3c_fb_win *win)
+{
+	struct fb_info *fbi = win->fbinfo;
+
+	if (fbi->screen_base)
+		dma_free_writecombine(sfb->dev, PAGE_ALIGN(fbi->fix.smem_len),
+			      fbi->screen_base, fbi->fix.smem_start);
+}
+
+/**
+ * s3c_fb_release_win() - release resources for a framebuffer window.
+ * @win: The window to cleanup the resources for.
+ *
+ * Release the resources that where claimed for the hardware window,
+ * such as the framebuffer instance and any memory claimed for it.
+ */
+static void s3c_fb_release_win(struct s3c_fb *sfb, struct s3c_fb_win *win)
+{
+	u32 data;
+
+	if (win->fbinfo) {
+		if (sfb->variant.has_shadowcon) {
+			data = readl(sfb->regs + SHADOWCON);
+			data &= ~SHADOWCON_CHx_ENABLE(win->index);
+			data &= ~SHADOWCON_CHx_LOCAL_ENABLE(win->index);
+			writel(data, sfb->regs + SHADOWCON);
+		}
+		unregister_framebuffer(win->fbinfo);
+		if (win->fbinfo->cmap.len)
+			fb_dealloc_cmap(&win->fbinfo->cmap);
+		s3c_fb_free_memory(sfb, win);
+		framebuffer_release(win->fbinfo);
+	}
+}
+
+/**
+ * s3c_fb_probe_win() - register an hardware window
+ * @sfb: The base resources for the hardware
+ * @variant: The variant information for this window.
+ * @res: Pointer to where to place the resultant window.
+ *
+ * Allocate and do the basic initialisation for one of the hardware's graphics
+ * windows.
+ */
+static int s3c_fb_probe_win(struct s3c_fb *sfb, unsigned int win_no,
+			    struct s3c_fb_win_variant *variant,
+			    struct s3c_fb_win **res)
+{
+	struct fb_var_screeninfo *var;
+	struct fb_videomode initmode;
+	struct s3c_fb_pd_win *windata;
+	struct s3c_fb_win *win;
+	struct fb_info *fbinfo;
+	int palette_size;
+	int ret;
+
+	dev_dbg(sfb->dev, "probing window %d, variant %p\n", win_no, variant);
+
+	init_waitqueue_head(&sfb->vsync_info.wait);
+
+	palette_size = variant->palette_sz * 4;
+
+	fbinfo = framebuffer_alloc(sizeof(struct s3c_fb_win) +
+				   palette_size * sizeof(u32), sfb->dev);
+	if (!fbinfo) {
+		dev_err(sfb->dev, "failed to allocate framebuffer\n");
+		return -ENOENT;
+	}
+
+	windata = sfb->pdata->win[win_no];
+	initmode = *sfb->pdata->vtiming;
+
+	WARN_ON(windata->max_bpp == 0);
+	WARN_ON(windata->xres == 0);
+	WARN_ON(windata->yres == 0);
+
+	win = fbinfo->par;
+	*res = win;
+	var = &fbinfo->var;
+	win->variant = *variant;
+	win->fbinfo = fbinfo;
+	win->parent = sfb;
+	win->windata = windata;
+	win->index = win_no;
+	win->palette_buffer = (u32 *)(win + 1);
+
+	ret = s3c_fb_alloc_memory(sfb, win);
+	if (ret) {
+		dev_err(sfb->dev, "failed to allocate display memory\n");
+		return ret;
+	}
+
+	/* setup the r/b/g positions for the window's palette */
+	if (win->variant.palette_16bpp) {
+		/* Set RGB 5:6:5 as default */
+		win->palette.r.offset = 11;
+		win->palette.r.length = 5;
+		win->palette.g.offset = 5;
+		win->palette.g.length = 6;
+		win->palette.b.offset = 0;
+		win->palette.b.length = 5;
+
+	} else {
+		/* Set 8bpp or 8bpp and 1bit alpha */
+		win->palette.r.offset = 16;
+		win->palette.r.length = 8;
+		win->palette.g.offset = 8;
+		win->palette.g.length = 8;
+		win->palette.b.offset = 0;
+		win->palette.b.length = 8;
+	}
+
+	/* setup the initial video mode from the window */
+	initmode.xres = windata->xres;
+	initmode.yres = windata->yres;
+	fb_videomode_to_var(&fbinfo->var, &initmode);
+
+	fbinfo->fix.type	= FB_TYPE_PACKED_PIXELS;
+	fbinfo->fix.accel	= FB_ACCEL_NONE;
+	fbinfo->var.activate	= FB_ACTIVATE_NOW;
+	fbinfo->var.vmode	= FB_VMODE_NONINTERLACED;
+	fbinfo->var.bits_per_pixel = windata->default_bpp;
+	fbinfo->fbops		= &s3c_fb_ops;
+	fbinfo->flags		= FBINFO_FLAG_DEFAULT;
+	fbinfo->pseudo_palette  = &win->pseudo_palette;
+
+	/* prepare to actually start the framebuffer */
+
+	ret = s3c_fb_check_var(&fbinfo->var, fbinfo);
+	if (ret < 0) {
+		dev_err(sfb->dev, "check_var failed on initial video params\n");
+		return ret;
+	}
+
+	/* create initial colour map */
+
+	ret = fb_alloc_cmap(&fbinfo->cmap, win->variant.palette_sz, 1);
+	if (ret == 0)
+		fb_set_cmap(&fbinfo->cmap, fbinfo);
+	else
+		dev_err(sfb->dev, "failed to allocate fb cmap\n");
+
+	s3c_fb_set_par(fbinfo);
+
+	dev_dbg(sfb->dev, "about to register framebuffer\n");
+
+	/* run the check_var and set_par on our configuration. */
+
+	ret = register_framebuffer(fbinfo);
+	if (ret < 0) {
+		dev_err(sfb->dev, "failed to register framebuffer\n");
+		return ret;
+	}
+
+	dev_info(sfb->dev, "window %d: fb %s\n", win_no, fbinfo->fix.id);
+
+	return 0;
+}
+
+/**
+ * s3c_fb_set_rgb_timing() - set video timing for rgb interface.
+ * @sfb: The base resources for the hardware.
+ *
+ * Set horizontal and vertical lcd rgb interface timing.
+ */
+static void s3c_fb_set_rgb_timing(struct s3c_fb *sfb)
+{
+	struct fb_videomode *vmode = sfb->pdata->vtiming;
+	void __iomem *regs = sfb->regs;
+	int clkdiv;
+	u32 data;
+
+	if (!vmode->pixclock)
+		s3c_fb_missing_pixclock(vmode);
+
+	clkdiv = s3c_fb_calc_pixclk(sfb, vmode->pixclock);
+
+	data = sfb->pdata->vidcon0;
+	data &= ~(VIDCON0_CLKVAL_F_MASK | VIDCON0_CLKDIR);
+
+	if (clkdiv > 1)
+		data |= VIDCON0_CLKVAL_F(clkdiv-1) | VIDCON0_CLKDIR;
+	else
+		data &= ~VIDCON0_CLKDIR;	/* 1:1 clock */
+
+	if (sfb->variant.is_2443)
+		data |= (1 << 5);
+	writel(data, regs + VIDCON0);
+
+	data = VIDTCON0_VBPD(vmode->upper_margin - 1) |
+	       VIDTCON0_VFPD(vmode->lower_margin - 1) |
+	       VIDTCON0_VSPW(vmode->vsync_len - 1);
+	writel(data, regs + sfb->variant.vidtcon);
+
+	data = VIDTCON1_HBPD(vmode->left_margin - 1) |
+	       VIDTCON1_HFPD(vmode->right_margin - 1) |
+	       VIDTCON1_HSPW(vmode->hsync_len - 1);
+	writel(data, regs + sfb->variant.vidtcon + 4);
+
+	data = VIDTCON2_LINEVAL(vmode->yres - 1) |
+	       VIDTCON2_HOZVAL(vmode->xres - 1) |
+	       VIDTCON2_LINEVAL_E(vmode->yres - 1) |
+	       VIDTCON2_HOZVAL_E(vmode->xres - 1);
+	writel(data, regs + sfb->variant.vidtcon + 8);
+}
+
+/**
+ * s3c_fb_clear_win() - clear hardware window registers.
+ * @sfb: The base resources for the hardware.
+ * @win: The window to process.
+ *
+ * Reset the specific window registers to a known state.
+ */
+static void s3c_fb_clear_win(struct s3c_fb *sfb, int win)
+{
+	void __iomem *regs = sfb->regs;
+	u32 reg;
+
+	writel(0, regs + sfb->variant.wincon + (win * 4));
+	writel(0, regs + VIDOSD_A(win, sfb->variant));
+	writel(0, regs + VIDOSD_B(win, sfb->variant));
+	writel(0, regs + VIDOSD_C(win, sfb->variant));
+
+	if (sfb->variant.has_shadowcon) {
+		reg = readl(sfb->regs + SHADOWCON);
+		reg &= ~(SHADOWCON_WINx_PROTECT(win) |
+			SHADOWCON_CHx_ENABLE(win) |
+			SHADOWCON_CHx_LOCAL_ENABLE(win));
+		writel(reg, sfb->regs + SHADOWCON);
+	}
+}
+
+static int s3c_fb_probe(struct platform_device *pdev)
+{
+	const struct platform_device_id *platid;
+	struct s3c_fb_driverdata *fbdrv;
+	struct device *dev = &pdev->dev;
+	struct s3c_fb_platdata *pd;
+	struct s3c_fb *sfb;
+	struct resource *res;
+	int win;
+	int ret = 0;
+	u32 reg;
+
+	platid = platform_get_device_id(pdev);
+	fbdrv = (struct s3c_fb_driverdata *)platid->driver_data;
+
+	if (fbdrv->variant.nr_windows > S3C_FB_MAX_WIN) {
+		dev_err(dev, "too many windows, cannot attach\n");
+		return -EINVAL;
+	}
+
+	pd = pdev->dev.platform_data;
+	if (!pd) {
+		dev_err(dev, "no platform data specified\n");
+		return -EINVAL;
+	}
+
+	sfb = devm_kzalloc(dev, sizeof(struct s3c_fb), GFP_KERNEL);
+	if (!sfb) {
+		dev_err(dev, "no memory for framebuffers\n");
+		return -ENOMEM;
+	}
+
+	dev_dbg(dev, "allocate new framebuffer %p\n", sfb);
+
+	sfb->dev = dev;
+	sfb->pdata = pd;
+	sfb->variant = fbdrv->variant;
+
+	spin_lock_init(&sfb->slock);
+
+	sfb->bus_clk = devm_clk_get(dev, "lcd");
+	if (IS_ERR(sfb->bus_clk)) {
+		dev_err(dev, "failed to get bus clock\n");
+		return PTR_ERR(sfb->bus_clk);
+	}
+
+	clk_prepare_enable(sfb->bus_clk);
+
+	if (!sfb->variant.has_clksel) {
+		sfb->lcd_clk = devm_clk_get(dev, "sclk_fimd");
+		if (IS_ERR(sfb->lcd_clk)) {
+			dev_err(dev, "failed to get lcd clock\n");
+			ret = PTR_ERR(sfb->lcd_clk);
+			goto err_bus_clk;
+		}
+
+		clk_prepare_enable(sfb->lcd_clk);
+	}
+
+	pm_runtime_enable(sfb->dev);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	sfb->regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(sfb->regs)) {
+		ret = PTR_ERR(sfb->regs);
+		goto err_lcd_clk;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res) {
+		dev_err(dev, "failed to acquire irq resource\n");
+		ret = -ENOENT;
+		goto err_lcd_clk;
+	}
+	sfb->irq_no = res->start;
+	ret = devm_request_irq(dev, sfb->irq_no, s3c_fb_irq,
+			  0, "s3c_fb", sfb);
+	if (ret) {
+		dev_err(dev, "irq request failed\n");
+		goto err_lcd_clk;
+	}
+
+	dev_dbg(dev, "got resources (regs %p), probing windows\n", sfb->regs);
+
+	platform_set_drvdata(pdev, sfb);
+	pm_runtime_get_sync(sfb->dev);
+
+	/* setup gpio and output polarity controls */
+
+	pd->setup_gpio();
+
+	writel(pd->vidcon1, sfb->regs + VIDCON1);
+
+	/* set video clock running at under-run */
+	if (sfb->variant.has_fixvclk) {
+		reg = readl(sfb->regs + VIDCON1);
+		reg &= ~VIDCON1_VCLK_MASK;
+		reg |= VIDCON1_VCLK_RUN;
+		writel(reg, sfb->regs + VIDCON1);
+	}
+
+	/* zero all windows before we do anything */
+
+	for (win = 0; win < fbdrv->variant.nr_windows; win++)
+		s3c_fb_clear_win(sfb, win);
+
+	/* initialise colour key controls */
+	for (win = 0; win < (fbdrv->variant.nr_windows - 1); win++) {
+		void __iomem *regs = sfb->regs + sfb->variant.keycon;
+
+		regs += (win * 8);
+		writel(0xffffff, regs + WKEYCON0);
+		writel(0xffffff, regs + WKEYCON1);
+	}
+
+	s3c_fb_set_rgb_timing(sfb);
+
+	/* we have the register setup, start allocating framebuffers */
+
+	for (win = 0; win < fbdrv->variant.nr_windows; win++) {
+		if (!pd->win[win])
+			continue;
+
+		ret = s3c_fb_probe_win(sfb, win, fbdrv->win[win],
+				       &sfb->windows[win]);
+		if (ret < 0) {
+			dev_err(dev, "failed to create window %d\n", win);
+			for (; win >= 0; win--)
+				s3c_fb_release_win(sfb, sfb->windows[win]);
+			goto err_pm_runtime;
+		}
+	}
+
+	platform_set_drvdata(pdev, sfb);
+	pm_runtime_put_sync(sfb->dev);
+
+	return 0;
+
+err_pm_runtime:
+	pm_runtime_put_sync(sfb->dev);
+
+err_lcd_clk:
+	pm_runtime_disable(sfb->dev);
+
+	if (!sfb->variant.has_clksel)
+		clk_disable_unprepare(sfb->lcd_clk);
+
+err_bus_clk:
+	clk_disable_unprepare(sfb->bus_clk);
+
+	return ret;
+}
+
+/**
+ * s3c_fb_remove() - Cleanup on module finalisation
+ * @pdev: The platform device we are bound to.
+ *
+ * Shutdown and then release all the resources that the driver allocated
+ * on initialisation.
+ */
+static int s3c_fb_remove(struct platform_device *pdev)
+{
+	struct s3c_fb *sfb = platform_get_drvdata(pdev);
+	int win;
+
+	pm_runtime_get_sync(sfb->dev);
+
+	for (win = 0; win < S3C_FB_MAX_WIN; win++)
+		if (sfb->windows[win])
+			s3c_fb_release_win(sfb, sfb->windows[win]);
+
+	if (!sfb->variant.has_clksel)
+		clk_disable_unprepare(sfb->lcd_clk);
+
+	clk_disable_unprepare(sfb->bus_clk);
+
+	pm_runtime_put_sync(sfb->dev);
+	pm_runtime_disable(sfb->dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int s3c_fb_suspend(struct device *dev)
+{
+	struct s3c_fb *sfb = dev_get_drvdata(dev);
+	struct s3c_fb_win *win;
+	int win_no;
+
+	pm_runtime_get_sync(sfb->dev);
+
+	for (win_no = S3C_FB_MAX_WIN - 1; win_no >= 0; win_no--) {
+		win = sfb->windows[win_no];
+		if (!win)
+			continue;
+
+		/* use the blank function to push into power-down */
+		s3c_fb_blank(FB_BLANK_POWERDOWN, win->fbinfo);
+	}
+
+	if (!sfb->variant.has_clksel)
+		clk_disable_unprepare(sfb->lcd_clk);
+
+	clk_disable_unprepare(sfb->bus_clk);
+
+	pm_runtime_put_sync(sfb->dev);
+
+	return 0;
+}
+
+static int s3c_fb_resume(struct device *dev)
+{
+	struct s3c_fb *sfb = dev_get_drvdata(dev);
+	struct s3c_fb_platdata *pd = sfb->pdata;
+	struct s3c_fb_win *win;
+	int win_no;
+	u32 reg;
+
+	pm_runtime_get_sync(sfb->dev);
+
+	clk_prepare_enable(sfb->bus_clk);
+
+	if (!sfb->variant.has_clksel)
+		clk_prepare_enable(sfb->lcd_clk);
+
+	/* setup gpio and output polarity controls */
+	pd->setup_gpio();
+	writel(pd->vidcon1, sfb->regs + VIDCON1);
+
+	/* set video clock running at under-run */
+	if (sfb->variant.has_fixvclk) {
+		reg = readl(sfb->regs + VIDCON1);
+		reg &= ~VIDCON1_VCLK_MASK;
+		reg |= VIDCON1_VCLK_RUN;
+		writel(reg, sfb->regs + VIDCON1);
+	}
+
+	/* zero all windows before we do anything */
+	for (win_no = 0; win_no < sfb->variant.nr_windows; win_no++)
+		s3c_fb_clear_win(sfb, win_no);
+
+	for (win_no = 0; win_no < sfb->variant.nr_windows - 1; win_no++) {
+		void __iomem *regs = sfb->regs + sfb->variant.keycon;
+		win = sfb->windows[win_no];
+		if (!win)
+			continue;
+
+		shadow_protect_win(win, 1);
+		regs += (win_no * 8);
+		writel(0xffffff, regs + WKEYCON0);
+		writel(0xffffff, regs + WKEYCON1);
+		shadow_protect_win(win, 0);
+	}
+
+	s3c_fb_set_rgb_timing(sfb);
+
+	/* restore framebuffers */
+	for (win_no = 0; win_no < S3C_FB_MAX_WIN; win_no++) {
+		win = sfb->windows[win_no];
+		if (!win)
+			continue;
+
+		dev_dbg(dev, "resuming window %d\n", win_no);
+		s3c_fb_set_par(win->fbinfo);
+	}
+
+	pm_runtime_put_sync(sfb->dev);
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_PM_RUNTIME
+static int s3c_fb_runtime_suspend(struct device *dev)
+{
+	struct s3c_fb *sfb = dev_get_drvdata(dev);
+
+	if (!sfb->variant.has_clksel)
+		clk_disable_unprepare(sfb->lcd_clk);
+
+	clk_disable_unprepare(sfb->bus_clk);
+
+	return 0;
+}
+
+static int s3c_fb_runtime_resume(struct device *dev)
+{
+	struct s3c_fb *sfb = dev_get_drvdata(dev);
+	struct s3c_fb_platdata *pd = sfb->pdata;
+
+	clk_prepare_enable(sfb->bus_clk);
+
+	if (!sfb->variant.has_clksel)
+		clk_prepare_enable(sfb->lcd_clk);
+
+	/* setup gpio and output polarity controls */
+	pd->setup_gpio();
+	writel(pd->vidcon1, sfb->regs + VIDCON1);
+
+	return 0;
+}
+#endif
+
+#define VALID_BPP124 (VALID_BPP(1) | VALID_BPP(2) | VALID_BPP(4))
+#define VALID_BPP1248 (VALID_BPP124 | VALID_BPP(8))
+
+static struct s3c_fb_win_variant s3c_fb_data_64xx_wins[] = {
+	[0] = {
+		.has_osd_c	= 1,
+		.osd_size_off	= 0x8,
+		.palette_sz	= 256,
+		.valid_bpp	= (VALID_BPP1248 | VALID_BPP(16) |
+				   VALID_BPP(18) | VALID_BPP(24)),
+	},
+	[1] = {
+		.has_osd_c	= 1,
+		.has_osd_d	= 1,
+		.osd_size_off	= 0xc,
+		.has_osd_alpha	= 1,
+		.palette_sz	= 256,
+		.valid_bpp	= (VALID_BPP1248 | VALID_BPP(16) |
+				   VALID_BPP(18) | VALID_BPP(19) |
+				   VALID_BPP(24) | VALID_BPP(25) |
+				   VALID_BPP(28)),
+	},
+	[2] = {
+		.has_osd_c	= 1,
+		.has_osd_d	= 1,
+		.osd_size_off	= 0xc,
+		.has_osd_alpha	= 1,
+		.palette_sz	= 16,
+		.palette_16bpp	= 1,
+		.valid_bpp	= (VALID_BPP1248 | VALID_BPP(16) |
+				   VALID_BPP(18) | VALID_BPP(19) |
+				   VALID_BPP(24) | VALID_BPP(25) |
+				   VALID_BPP(28)),
+	},
+	[3] = {
+		.has_osd_c	= 1,
+		.has_osd_alpha	= 1,
+		.palette_sz	= 16,
+		.palette_16bpp	= 1,
+		.valid_bpp	= (VALID_BPP124  | VALID_BPP(16) |
+				   VALID_BPP(18) | VALID_BPP(19) |
+				   VALID_BPP(24) | VALID_BPP(25) |
+				   VALID_BPP(28)),
+	},
+	[4] = {
+		.has_osd_c	= 1,
+		.has_osd_alpha	= 1,
+		.palette_sz	= 4,
+		.palette_16bpp	= 1,
+		.valid_bpp	= (VALID_BPP(1) | VALID_BPP(2) |
+				   VALID_BPP(16) | VALID_BPP(18) |
+				   VALID_BPP(19) | VALID_BPP(24) |
+				   VALID_BPP(25) | VALID_BPP(28)),
+	},
+};
+
+static struct s3c_fb_win_variant s3c_fb_data_s5p_wins[] = {
+	[0] = {
+		.has_osd_c	= 1,
+		.osd_size_off	= 0x8,
+		.palette_sz	= 256,
+		.valid_bpp	= (VALID_BPP1248 | VALID_BPP(13) |
+				   VALID_BPP(15) | VALID_BPP(16) |
+				   VALID_BPP(18) | VALID_BPP(19) |
+				   VALID_BPP(24) | VALID_BPP(25) |
+				   VALID_BPP(32)),
+	},
+	[1] = {
+		.has_osd_c	= 1,
+		.has_osd_d	= 1,
+		.osd_size_off	= 0xc,
+		.has_osd_alpha	= 1,
+		.palette_sz	= 256,
+		.valid_bpp	= (VALID_BPP1248 | VALID_BPP(13) |
+				   VALID_BPP(15) | VALID_BPP(16) |
+				   VALID_BPP(18) | VALID_BPP(19) |
+				   VALID_BPP(24) | VALID_BPP(25) |
+				   VALID_BPP(32)),
+	},
+	[2] = {
+		.has_osd_c	= 1,
+		.has_osd_d	= 1,
+		.osd_size_off	= 0xc,
+		.has_osd_alpha	= 1,
+		.palette_sz	= 256,
+		.valid_bpp	= (VALID_BPP1248 | VALID_BPP(13) |
+				   VALID_BPP(15) | VALID_BPP(16) |
+				   VALID_BPP(18) | VALID_BPP(19) |
+				   VALID_BPP(24) | VALID_BPP(25) |
+				   VALID_BPP(32)),
+	},
+	[3] = {
+		.has_osd_c	= 1,
+		.has_osd_alpha	= 1,
+		.palette_sz	= 256,
+		.valid_bpp	= (VALID_BPP1248 | VALID_BPP(13) |
+				   VALID_BPP(15) | VALID_BPP(16) |
+				   VALID_BPP(18) | VALID_BPP(19) |
+				   VALID_BPP(24) | VALID_BPP(25) |
+				   VALID_BPP(32)),
+	},
+	[4] = {
+		.has_osd_c	= 1,
+		.has_osd_alpha	= 1,
+		.palette_sz	= 256,
+		.valid_bpp	= (VALID_BPP1248 | VALID_BPP(13) |
+				   VALID_BPP(15) | VALID_BPP(16) |
+				   VALID_BPP(18) | VALID_BPP(19) |
+				   VALID_BPP(24) | VALID_BPP(25) |
+				   VALID_BPP(32)),
+	},
+};
+
+static struct s3c_fb_driverdata s3c_fb_data_64xx = {
+	.variant = {
+		.nr_windows	= 5,
+		.vidtcon	= VIDTCON0,
+		.wincon		= WINCON(0),
+		.winmap		= WINxMAP(0),
+		.keycon		= WKEYCON,
+		.osd		= VIDOSD_BASE,
+		.osd_stride	= 16,
+		.buf_start	= VIDW_BUF_START(0),
+		.buf_size	= VIDW_BUF_SIZE(0),
+		.buf_end	= VIDW_BUF_END(0),
+
+		.palette = {
+			[0] = 0x400,
+			[1] = 0x800,
+			[2] = 0x300,
+			[3] = 0x320,
+			[4] = 0x340,
+		},
+
+		.has_prtcon	= 1,
+		.has_clksel	= 1,
+	},
+	.win[0]	= &s3c_fb_data_64xx_wins[0],
+	.win[1]	= &s3c_fb_data_64xx_wins[1],
+	.win[2]	= &s3c_fb_data_64xx_wins[2],
+	.win[3]	= &s3c_fb_data_64xx_wins[3],
+	.win[4]	= &s3c_fb_data_64xx_wins[4],
+};
+
+static struct s3c_fb_driverdata s3c_fb_data_s5pc100 = {
+	.variant = {
+		.nr_windows	= 5,
+		.vidtcon	= VIDTCON0,
+		.wincon		= WINCON(0),
+		.winmap		= WINxMAP(0),
+		.keycon		= WKEYCON,
+		.osd		= VIDOSD_BASE,
+		.osd_stride	= 16,
+		.buf_start	= VIDW_BUF_START(0),
+		.buf_size	= VIDW_BUF_SIZE(0),
+		.buf_end	= VIDW_BUF_END(0),
+
+		.palette = {
+			[0] = 0x2400,
+			[1] = 0x2800,
+			[2] = 0x2c00,
+			[3] = 0x3000,
+			[4] = 0x3400,
+		},
+
+		.has_prtcon	= 1,
+		.has_blendcon	= 1,
+		.has_clksel	= 1,
+	},
+	.win[0]	= &s3c_fb_data_s5p_wins[0],
+	.win[1]	= &s3c_fb_data_s5p_wins[1],
+	.win[2]	= &s3c_fb_data_s5p_wins[2],
+	.win[3]	= &s3c_fb_data_s5p_wins[3],
+	.win[4]	= &s3c_fb_data_s5p_wins[4],
+};
+
+static struct s3c_fb_driverdata s3c_fb_data_s5pv210 = {
+	.variant = {
+		.nr_windows	= 5,
+		.vidtcon	= VIDTCON0,
+		.wincon		= WINCON(0),
+		.winmap		= WINxMAP(0),
+		.keycon		= WKEYCON,
+		.osd		= VIDOSD_BASE,
+		.osd_stride	= 16,
+		.buf_start	= VIDW_BUF_START(0),
+		.buf_size	= VIDW_BUF_SIZE(0),
+		.buf_end	= VIDW_BUF_END(0),
+
+		.palette = {
+			[0] = 0x2400,
+			[1] = 0x2800,
+			[2] = 0x2c00,
+			[3] = 0x3000,
+			[4] = 0x3400,
+		},
+
+		.has_shadowcon	= 1,
+		.has_blendcon	= 1,
+		.has_clksel	= 1,
+		.has_fixvclk	= 1,
+	},
+	.win[0]	= &s3c_fb_data_s5p_wins[0],
+	.win[1]	= &s3c_fb_data_s5p_wins[1],
+	.win[2]	= &s3c_fb_data_s5p_wins[2],
+	.win[3]	= &s3c_fb_data_s5p_wins[3],
+	.win[4]	= &s3c_fb_data_s5p_wins[4],
+};
+
+static struct s3c_fb_driverdata s3c_fb_data_exynos4 = {
+	.variant = {
+		.nr_windows	= 5,
+		.vidtcon	= VIDTCON0,
+		.wincon		= WINCON(0),
+		.winmap		= WINxMAP(0),
+		.keycon		= WKEYCON,
+		.osd		= VIDOSD_BASE,
+		.osd_stride	= 16,
+		.buf_start	= VIDW_BUF_START(0),
+		.buf_size	= VIDW_BUF_SIZE(0),
+		.buf_end	= VIDW_BUF_END(0),
+
+		.palette = {
+			[0] = 0x2400,
+			[1] = 0x2800,
+			[2] = 0x2c00,
+			[3] = 0x3000,
+			[4] = 0x3400,
+		},
+
+		.has_shadowcon	= 1,
+		.has_blendcon	= 1,
+		.has_fixvclk	= 1,
+	},
+	.win[0]	= &s3c_fb_data_s5p_wins[0],
+	.win[1]	= &s3c_fb_data_s5p_wins[1],
+	.win[2]	= &s3c_fb_data_s5p_wins[2],
+	.win[3]	= &s3c_fb_data_s5p_wins[3],
+	.win[4]	= &s3c_fb_data_s5p_wins[4],
+};
+
+static struct s3c_fb_driverdata s3c_fb_data_exynos5 = {
+	.variant = {
+		.nr_windows	= 5,
+		.vidtcon	= FIMD_V8_VIDTCON0,
+		.wincon		= WINCON(0),
+		.winmap		= WINxMAP(0),
+		.keycon		= WKEYCON,
+		.osd		= VIDOSD_BASE,
+		.osd_stride	= 16,
+		.buf_start	= VIDW_BUF_START(0),
+		.buf_size	= VIDW_BUF_SIZE(0),
+		.buf_end	= VIDW_BUF_END(0),
+
+		.palette = {
+			[0] = 0x2400,
+			[1] = 0x2800,
+			[2] = 0x2c00,
+			[3] = 0x3000,
+			[4] = 0x3400,
+		},
+		.has_shadowcon	= 1,
+		.has_blendcon	= 1,
+		.has_fixvclk	= 1,
+	},
+	.win[0]	= &s3c_fb_data_s5p_wins[0],
+	.win[1]	= &s3c_fb_data_s5p_wins[1],
+	.win[2]	= &s3c_fb_data_s5p_wins[2],
+	.win[3]	= &s3c_fb_data_s5p_wins[3],
+	.win[4]	= &s3c_fb_data_s5p_wins[4],
+};
+
+/* S3C2443/S3C2416 style hardware */
+static struct s3c_fb_driverdata s3c_fb_data_s3c2443 = {
+	.variant = {
+		.nr_windows	= 2,
+		.is_2443	= 1,
+
+		.vidtcon	= 0x08,
+		.wincon		= 0x14,
+		.winmap		= 0xd0,
+		.keycon		= 0xb0,
+		.osd		= 0x28,
+		.osd_stride	= 12,
+		.buf_start	= 0x64,
+		.buf_size	= 0x94,
+		.buf_end	= 0x7c,
+
+		.palette = {
+			[0] = 0x400,
+			[1] = 0x800,
+		},
+		.has_clksel	= 1,
+	},
+	.win[0] = &(struct s3c_fb_win_variant) {
+		.palette_sz	= 256,
+		.valid_bpp	= VALID_BPP1248 | VALID_BPP(16) | VALID_BPP(24),
+	},
+	.win[1] = &(struct s3c_fb_win_variant) {
+		.has_osd_c	= 1,
+		.has_osd_alpha	= 1,
+		.palette_sz	= 256,
+		.valid_bpp	= (VALID_BPP1248 | VALID_BPP(16) |
+				   VALID_BPP(18) | VALID_BPP(19) |
+				   VALID_BPP(24) | VALID_BPP(25) |
+				   VALID_BPP(28)),
+	},
+};
+
+static struct s3c_fb_driverdata s3c_fb_data_s5p64x0 = {
+	.variant = {
+		.nr_windows	= 3,
+		.vidtcon	= VIDTCON0,
+		.wincon		= WINCON(0),
+		.winmap		= WINxMAP(0),
+		.keycon		= WKEYCON,
+		.osd		= VIDOSD_BASE,
+		.osd_stride	= 16,
+		.buf_start	= VIDW_BUF_START(0),
+		.buf_size	= VIDW_BUF_SIZE(0),
+		.buf_end	= VIDW_BUF_END(0),
+
+		.palette = {
+			[0] = 0x2400,
+			[1] = 0x2800,
+			[2] = 0x2c00,
+		},
+
+		.has_blendcon	= 1,
+		.has_fixvclk	= 1,
+	},
+	.win[0] = &s3c_fb_data_s5p_wins[0],
+	.win[1] = &s3c_fb_data_s5p_wins[1],
+	.win[2] = &s3c_fb_data_s5p_wins[2],
+};
+
+static struct platform_device_id s3c_fb_driver_ids[] = {
+	{
+		.name		= "s3c-fb",
+		.driver_data	= (unsigned long)&s3c_fb_data_64xx,
+	}, {
+		.name		= "s5pc100-fb",
+		.driver_data	= (unsigned long)&s3c_fb_data_s5pc100,
+	}, {
+		.name		= "s5pv210-fb",
+		.driver_data	= (unsigned long)&s3c_fb_data_s5pv210,
+	}, {
+		.name		= "exynos4-fb",
+		.driver_data	= (unsigned long)&s3c_fb_data_exynos4,
+	}, {
+		.name		= "exynos5-fb",
+		.driver_data	= (unsigned long)&s3c_fb_data_exynos5,
+	}, {
+		.name		= "s3c2443-fb",
+		.driver_data	= (unsigned long)&s3c_fb_data_s3c2443,
+	}, {
+		.name		= "s5p64x0-fb",
+		.driver_data	= (unsigned long)&s3c_fb_data_s5p64x0,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(platform, s3c_fb_driver_ids);
+
+static const struct dev_pm_ops s3cfb_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(s3c_fb_suspend, s3c_fb_resume)
+	SET_RUNTIME_PM_OPS(s3c_fb_runtime_suspend, s3c_fb_runtime_resume,
+			   NULL)
+};
+
+static struct platform_driver s3c_fb_driver = {
+	.probe		= s3c_fb_probe,
+	.remove		= s3c_fb_remove,
+	.id_table	= s3c_fb_driver_ids,
+	.driver		= {
+		.name	= "s3c-fb",
+		.owner	= THIS_MODULE,
+		.pm	= &s3cfb_pm_ops,
+	},
+};
+
+module_platform_driver(s3c_fb_driver);
+
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("Samsung S3C SoC Framebuffer driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:s3c-fb");
-- 
cgit v1.3.1