From 8e4bff4cab0ddac6060645b0715210484d02ff40 Mon Sep 17 00:00:00 2001
From: Yuval Adam <_@yuv.al>
Date: Wed, 30 Aug 2017 08:25:59 +0000
Subject: Initial file dump from open source release

---
 drivers/video/omap2/displays/panel-taal.c | 1551 +++++++++++++++++++++++++++++
 1 file changed, 1551 insertions(+)
 create mode 100644 drivers/video/omap2/displays/panel-taal.c

(limited to 'drivers/video/omap2/displays/panel-taal.c')

diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
new file mode 100644
index 00000000..c4f78bda
--- /dev/null
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -0,0 +1,1551 @@
+/*
+ * Taal DSI command mode panel
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*#define DEBUG*/
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/jiffies.h>
+#include <linux/sched.h>
+#include <linux/backlight.h>
+#include <linux/fb.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/workqueue.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+#include <video/mipi_display.h>
+
+/* DSI Virtual channel. Hardcoded for now. */
+#define TCH 0
+
+#define DCS_READ_NUM_ERRORS	0x05
+#define DCS_BRIGHTNESS		0x51
+#define DCS_CTRL_DISPLAY	0x53
+#define DCS_WRITE_CABC		0x55
+#define DCS_READ_CABC		0x56
+#define DCS_GET_ID1		0xda
+#define DCS_GET_ID2		0xdb
+#define DCS_GET_ID3		0xdc
+
+static irqreturn_t taal_te_isr(int irq, void *data);
+static void taal_te_timeout_work_callback(struct work_struct *work);
+static int _taal_enable_te(struct omap_dss_device *dssdev, bool enable);
+
+static int taal_panel_reset(struct omap_dss_device *dssdev);
+
+struct taal_data {
+	struct mutex lock;
+
+	struct backlight_device *bldev;
+
+	unsigned long	hw_guard_end;	/* next value of jiffies when we can
+					 * issue the next sleep in/out command
+					 */
+	unsigned long	hw_guard_wait;	/* max guard time in jiffies */
+
+	struct omap_dss_device *dssdev;
+
+	/* panel HW configuration from DT or platform data */
+	int reset_gpio;
+	int ext_te_gpio;
+
+	bool use_dsi_backlight;
+
+	struct omap_dsi_pin_config pin_config;
+
+	/* runtime variables */
+	bool enabled;
+
+	bool te_enabled;
+
+	atomic_t do_update;
+	int channel;
+
+	struct delayed_work te_timeout_work;
+
+	bool cabc_broken;
+	unsigned cabc_mode;
+
+	bool intro_printed;
+
+	struct workqueue_struct *workqueue;
+
+	struct delayed_work esd_work;
+	unsigned esd_interval;
+
+	bool ulps_enabled;
+	unsigned ulps_timeout;
+	struct delayed_work ulps_work;
+};
+
+static void taal_esd_work(struct work_struct *work);
+static void taal_ulps_work(struct work_struct *work);
+
+static void hw_guard_start(struct taal_data *td, int guard_msec)
+{
+	td->hw_guard_wait = msecs_to_jiffies(guard_msec);
+	td->hw_guard_end = jiffies + td->hw_guard_wait;
+}
+
+static void hw_guard_wait(struct taal_data *td)
+{
+	unsigned long wait = td->hw_guard_end - jiffies;
+
+	if ((long)wait > 0 && wait <= td->hw_guard_wait) {
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		schedule_timeout(wait);
+	}
+}
+
+static int taal_dcs_read_1(struct taal_data *td, u8 dcs_cmd, u8 *data)
+{
+	int r;
+	u8 buf[1];
+
+	r = dsi_vc_dcs_read(td->dssdev, td->channel, dcs_cmd, buf, 1);
+
+	if (r < 0)
+		return r;
+
+	*data = buf[0];
+
+	return 0;
+}
+
+static int taal_dcs_write_0(struct taal_data *td, u8 dcs_cmd)
+{
+	return dsi_vc_dcs_write(td->dssdev, td->channel, &dcs_cmd, 1);
+}
+
+static int taal_dcs_write_1(struct taal_data *td, u8 dcs_cmd, u8 param)
+{
+	u8 buf[2];
+	buf[0] = dcs_cmd;
+	buf[1] = param;
+	return dsi_vc_dcs_write(td->dssdev, td->channel, buf, 2);
+}
+
+static int taal_sleep_in(struct taal_data *td)
+
+{
+	u8 cmd;
+	int r;
+
+	hw_guard_wait(td);
+
+	cmd = MIPI_DCS_ENTER_SLEEP_MODE;
+	r = dsi_vc_dcs_write_nosync(td->dssdev, td->channel, &cmd, 1);
+	if (r)
+		return r;
+
+	hw_guard_start(td, 120);
+
+	msleep(5);
+
+	return 0;
+}
+
+static int taal_sleep_out(struct taal_data *td)
+{
+	int r;
+
+	hw_guard_wait(td);
+
+	r = taal_dcs_write_0(td, MIPI_DCS_EXIT_SLEEP_MODE);
+	if (r)
+		return r;
+
+	hw_guard_start(td, 120);
+
+	msleep(5);
+
+	return 0;
+}
+
+static int taal_get_id(struct taal_data *td, u8 *id1, u8 *id2, u8 *id3)
+{
+	int r;
+
+	r = taal_dcs_read_1(td, DCS_GET_ID1, id1);
+	if (r)
+		return r;
+	r = taal_dcs_read_1(td, DCS_GET_ID2, id2);
+	if (r)
+		return r;
+	r = taal_dcs_read_1(td, DCS_GET_ID3, id3);
+	if (r)
+		return r;
+
+	return 0;
+}
+
+static int taal_set_update_window(struct taal_data *td,
+		u16 x, u16 y, u16 w, u16 h)
+{
+	int r;
+	u16 x1 = x;
+	u16 x2 = x + w - 1;
+	u16 y1 = y;
+	u16 y2 = y + h - 1;
+
+	u8 buf[5];
+	buf[0] = MIPI_DCS_SET_COLUMN_ADDRESS;
+	buf[1] = (x1 >> 8) & 0xff;
+	buf[2] = (x1 >> 0) & 0xff;
+	buf[3] = (x2 >> 8) & 0xff;
+	buf[4] = (x2 >> 0) & 0xff;
+
+	r = dsi_vc_dcs_write_nosync(td->dssdev, td->channel, buf, sizeof(buf));
+	if (r)
+		return r;
+
+	buf[0] = MIPI_DCS_SET_PAGE_ADDRESS;
+	buf[1] = (y1 >> 8) & 0xff;
+	buf[2] = (y1 >> 0) & 0xff;
+	buf[3] = (y2 >> 8) & 0xff;
+	buf[4] = (y2 >> 0) & 0xff;
+
+	r = dsi_vc_dcs_write_nosync(td->dssdev, td->channel, buf, sizeof(buf));
+	if (r)
+		return r;
+
+	dsi_vc_send_bta_sync(td->dssdev, td->channel);
+
+	return r;
+}
+
+static void taal_queue_esd_work(struct omap_dss_device *dssdev)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+
+	if (td->esd_interval > 0)
+		queue_delayed_work(td->workqueue, &td->esd_work,
+				msecs_to_jiffies(td->esd_interval));
+}
+
+static void taal_cancel_esd_work(struct omap_dss_device *dssdev)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+
+	cancel_delayed_work(&td->esd_work);
+}
+
+static void taal_queue_ulps_work(struct omap_dss_device *dssdev)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+
+	if (td->ulps_timeout > 0)
+		queue_delayed_work(td->workqueue, &td->ulps_work,
+				msecs_to_jiffies(td->ulps_timeout));
+}
+
+static void taal_cancel_ulps_work(struct omap_dss_device *dssdev)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+
+	cancel_delayed_work(&td->ulps_work);
+}
+
+static int taal_enter_ulps(struct omap_dss_device *dssdev)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	int r;
+
+	if (td->ulps_enabled)
+		return 0;
+
+	taal_cancel_ulps_work(dssdev);
+
+	r = _taal_enable_te(dssdev, false);
+	if (r)
+		goto err;
+
+	if (gpio_is_valid(td->ext_te_gpio))
+		disable_irq(gpio_to_irq(td->ext_te_gpio));
+
+	omapdss_dsi_display_disable(dssdev, false, true);
+
+	td->ulps_enabled = true;
+
+	return 0;
+
+err:
+	dev_err(&dssdev->dev, "enter ULPS failed");
+	taal_panel_reset(dssdev);
+
+	td->ulps_enabled = false;
+
+	taal_queue_ulps_work(dssdev);
+
+	return r;
+}
+
+static int taal_exit_ulps(struct omap_dss_device *dssdev)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	int r;
+
+	if (!td->ulps_enabled)
+		return 0;
+
+	r = omapdss_dsi_display_enable(dssdev);
+	if (r) {
+		dev_err(&dssdev->dev, "failed to enable DSI\n");
+		goto err1;
+	}
+
+	omapdss_dsi_vc_enable_hs(dssdev, td->channel, true);
+
+	r = _taal_enable_te(dssdev, true);
+	if (r) {
+		dev_err(&dssdev->dev, "failed to re-enable TE");
+		goto err2;
+	}
+
+	if (gpio_is_valid(td->ext_te_gpio))
+		enable_irq(gpio_to_irq(td->ext_te_gpio));
+
+	taal_queue_ulps_work(dssdev);
+
+	td->ulps_enabled = false;
+
+	return 0;
+
+err2:
+	dev_err(&dssdev->dev, "failed to exit ULPS");
+
+	r = taal_panel_reset(dssdev);
+	if (!r) {
+		if (gpio_is_valid(td->ext_te_gpio))
+			enable_irq(gpio_to_irq(td->ext_te_gpio));
+		td->ulps_enabled = false;
+	}
+err1:
+	taal_queue_ulps_work(dssdev);
+
+	return r;
+}
+
+static int taal_wake_up(struct omap_dss_device *dssdev)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+
+	if (td->ulps_enabled)
+		return taal_exit_ulps(dssdev);
+
+	taal_cancel_ulps_work(dssdev);
+	taal_queue_ulps_work(dssdev);
+	return 0;
+}
+
+static int taal_bl_update_status(struct backlight_device *dev)
+{
+	struct omap_dss_device *dssdev = dev_get_drvdata(&dev->dev);
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	int r;
+	int level;
+
+	if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
+			dev->props.power == FB_BLANK_UNBLANK)
+		level = dev->props.brightness;
+	else
+		level = 0;
+
+	dev_dbg(&dssdev->dev, "update brightness to %d\n", level);
+
+	mutex_lock(&td->lock);
+
+	if (td->enabled) {
+		dsi_bus_lock(dssdev);
+
+		r = taal_wake_up(dssdev);
+		if (!r)
+			r = taal_dcs_write_1(td, DCS_BRIGHTNESS, level);
+
+		dsi_bus_unlock(dssdev);
+	} else {
+		r = 0;
+	}
+
+	mutex_unlock(&td->lock);
+
+	return r;
+}
+
+static int taal_bl_get_intensity(struct backlight_device *dev)
+{
+	if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
+			dev->props.power == FB_BLANK_UNBLANK)
+		return dev->props.brightness;
+
+	return 0;
+}
+
+static const struct backlight_ops taal_bl_ops = {
+	.get_brightness = taal_bl_get_intensity,
+	.update_status  = taal_bl_update_status,
+};
+
+static void taal_get_resolution(struct omap_dss_device *dssdev,
+		u16 *xres, u16 *yres)
+{
+	*xres = dssdev->panel.timings.x_res;
+	*yres = dssdev->panel.timings.y_res;
+}
+
+static ssize_t taal_num_errors_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	u8 errors = 0;
+	int r;
+
+	mutex_lock(&td->lock);
+
+	if (td->enabled) {
+		dsi_bus_lock(dssdev);
+
+		r = taal_wake_up(dssdev);
+		if (!r)
+			r = taal_dcs_read_1(td, DCS_READ_NUM_ERRORS, &errors);
+
+		dsi_bus_unlock(dssdev);
+	} else {
+		r = -ENODEV;
+	}
+
+	mutex_unlock(&td->lock);
+
+	if (r)
+		return r;
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", errors);
+}
+
+static ssize_t taal_hw_revision_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	u8 id1, id2, id3;
+	int r;
+
+	mutex_lock(&td->lock);
+
+	if (td->enabled) {
+		dsi_bus_lock(dssdev);
+
+		r = taal_wake_up(dssdev);
+		if (!r)
+			r = taal_get_id(td, &id1, &id2, &id3);
+
+		dsi_bus_unlock(dssdev);
+	} else {
+		r = -ENODEV;
+	}
+
+	mutex_unlock(&td->lock);
+
+	if (r)
+		return r;
+
+	return snprintf(buf, PAGE_SIZE, "%02x.%02x.%02x\n", id1, id2, id3);
+}
+
+static const char *cabc_modes[] = {
+	"off",		/* used also always when CABC is not supported */
+	"ui",
+	"still-image",
+	"moving-image",
+};
+
+static ssize_t show_cabc_mode(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	const char *mode_str;
+	int mode;
+	int len;
+
+	mode = td->cabc_mode;
+
+	mode_str = "unknown";
+	if (mode >= 0 && mode < ARRAY_SIZE(cabc_modes))
+		mode_str = cabc_modes[mode];
+	len = snprintf(buf, PAGE_SIZE, "%s\n", mode_str);
+
+	return len < PAGE_SIZE - 1 ? len : PAGE_SIZE - 1;
+}
+
+static ssize_t store_cabc_mode(struct device *dev,
+		struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	int i;
+	int r;
+
+	for (i = 0; i < ARRAY_SIZE(cabc_modes); i++) {
+		if (sysfs_streq(cabc_modes[i], buf))
+			break;
+	}
+
+	if (i == ARRAY_SIZE(cabc_modes))
+		return -EINVAL;
+
+	mutex_lock(&td->lock);
+
+	if (td->enabled) {
+		dsi_bus_lock(dssdev);
+
+		if (!td->cabc_broken) {
+			r = taal_wake_up(dssdev);
+			if (r)
+				goto err;
+
+			r = taal_dcs_write_1(td, DCS_WRITE_CABC, i);
+			if (r)
+				goto err;
+		}
+
+		dsi_bus_unlock(dssdev);
+	}
+
+	td->cabc_mode = i;
+
+	mutex_unlock(&td->lock);
+
+	return count;
+err:
+	dsi_bus_unlock(dssdev);
+	mutex_unlock(&td->lock);
+	return r;
+}
+
+static ssize_t show_cabc_available_modes(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	int len;
+	int i;
+
+	for (i = 0, len = 0;
+	     len < PAGE_SIZE && i < ARRAY_SIZE(cabc_modes); i++)
+		len += snprintf(&buf[len], PAGE_SIZE - len, "%s%s%s",
+			i ? " " : "", cabc_modes[i],
+			i == ARRAY_SIZE(cabc_modes) - 1 ? "\n" : "");
+
+	return len < PAGE_SIZE ? len : PAGE_SIZE - 1;
+}
+
+static ssize_t taal_store_esd_interval(struct device *dev,
+		struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+
+	unsigned long t;
+	int r;
+
+	r = strict_strtoul(buf, 10, &t);
+	if (r)
+		return r;
+
+	mutex_lock(&td->lock);
+	taal_cancel_esd_work(dssdev);
+	td->esd_interval = t;
+	if (td->enabled)
+		taal_queue_esd_work(dssdev);
+	mutex_unlock(&td->lock);
+
+	return count;
+}
+
+static ssize_t taal_show_esd_interval(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	unsigned t;
+
+	mutex_lock(&td->lock);
+	t = td->esd_interval;
+	mutex_unlock(&td->lock);
+
+	return snprintf(buf, PAGE_SIZE, "%u\n", t);
+}
+
+static ssize_t taal_store_ulps(struct device *dev,
+		struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	unsigned long t;
+	int r;
+
+	r = strict_strtoul(buf, 10, &t);
+	if (r)
+		return r;
+
+	mutex_lock(&td->lock);
+
+	if (td->enabled) {
+		dsi_bus_lock(dssdev);
+
+		if (t)
+			r = taal_enter_ulps(dssdev);
+		else
+			r = taal_wake_up(dssdev);
+
+		dsi_bus_unlock(dssdev);
+	}
+
+	mutex_unlock(&td->lock);
+
+	if (r)
+		return r;
+
+	return count;
+}
+
+static ssize_t taal_show_ulps(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	unsigned t;
+
+	mutex_lock(&td->lock);
+	t = td->ulps_enabled;
+	mutex_unlock(&td->lock);
+
+	return snprintf(buf, PAGE_SIZE, "%u\n", t);
+}
+
+static ssize_t taal_store_ulps_timeout(struct device *dev,
+		struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	unsigned long t;
+	int r;
+
+	r = strict_strtoul(buf, 10, &t);
+	if (r)
+		return r;
+
+	mutex_lock(&td->lock);
+	td->ulps_timeout = t;
+
+	if (td->enabled) {
+		/* taal_wake_up will restart the timer */
+		dsi_bus_lock(dssdev);
+		r = taal_wake_up(dssdev);
+		dsi_bus_unlock(dssdev);
+	}
+
+	mutex_unlock(&td->lock);
+
+	if (r)
+		return r;
+
+	return count;
+}
+
+static ssize_t taal_show_ulps_timeout(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	unsigned t;
+
+	mutex_lock(&td->lock);
+	t = td->ulps_timeout;
+	mutex_unlock(&td->lock);
+
+	return snprintf(buf, PAGE_SIZE, "%u\n", t);
+}
+
+static DEVICE_ATTR(num_dsi_errors, S_IRUGO, taal_num_errors_show, NULL);
+static DEVICE_ATTR(hw_revision, S_IRUGO, taal_hw_revision_show, NULL);
+static DEVICE_ATTR(cabc_mode, S_IRUGO | S_IWUSR,
+		show_cabc_mode, store_cabc_mode);
+static DEVICE_ATTR(cabc_available_modes, S_IRUGO,
+		show_cabc_available_modes, NULL);
+static DEVICE_ATTR(esd_interval, S_IRUGO | S_IWUSR,
+		taal_show_esd_interval, taal_store_esd_interval);
+static DEVICE_ATTR(ulps, S_IRUGO | S_IWUSR,
+		taal_show_ulps, taal_store_ulps);
+static DEVICE_ATTR(ulps_timeout, S_IRUGO | S_IWUSR,
+		taal_show_ulps_timeout, taal_store_ulps_timeout);
+
+static struct attribute *taal_attrs[] = {
+	&dev_attr_num_dsi_errors.attr,
+	&dev_attr_hw_revision.attr,
+	&dev_attr_cabc_mode.attr,
+	&dev_attr_cabc_available_modes.attr,
+	&dev_attr_esd_interval.attr,
+	&dev_attr_ulps.attr,
+	&dev_attr_ulps_timeout.attr,
+	NULL,
+};
+
+static struct attribute_group taal_attr_group = {
+	.attrs = taal_attrs,
+};
+
+static void taal_hw_reset(struct omap_dss_device *dssdev)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+
+	if (!gpio_is_valid(td->reset_gpio))
+		return;
+
+	gpio_set_value(td->reset_gpio, 1);
+	udelay(10);
+	/* reset the panel */
+	gpio_set_value(td->reset_gpio, 0);
+	/* assert reset */
+	udelay(10);
+	gpio_set_value(td->reset_gpio, 1);
+	/* wait after releasing reset */
+	msleep(5);
+}
+
+static void taal_probe_pdata(struct taal_data *td,
+		const struct nokia_dsi_panel_data *pdata)
+{
+	td->reset_gpio = pdata->reset_gpio;
+
+	if (pdata->use_ext_te)
+		td->ext_te_gpio = pdata->ext_te_gpio;
+	else
+		td->ext_te_gpio = -1;
+
+	td->esd_interval = pdata->esd_interval;
+	td->ulps_timeout = pdata->ulps_timeout;
+
+	td->use_dsi_backlight = pdata->use_dsi_backlight;
+
+	td->pin_config = pdata->pin_config;
+}
+
+static int taal_probe(struct omap_dss_device *dssdev)
+{
+	struct backlight_properties props;
+	struct taal_data *td;
+	struct backlight_device *bldev = NULL;
+	int r;
+
+	dev_dbg(&dssdev->dev, "probe\n");
+
+	td = devm_kzalloc(&dssdev->dev, sizeof(*td), GFP_KERNEL);
+	if (!td)
+		return -ENOMEM;
+
+	dev_set_drvdata(&dssdev->dev, td);
+	td->dssdev = dssdev;
+
+	if (dssdev->data) {
+		const struct nokia_dsi_panel_data *pdata = dssdev->data;
+
+		taal_probe_pdata(td, pdata);
+	} else {
+		return -ENODEV;
+	}
+
+	dssdev->panel.timings.x_res = 864;
+	dssdev->panel.timings.y_res = 480;
+	dssdev->panel.timings.pixel_clock = DIV_ROUND_UP(864 * 480 * 60, 1000);
+	dssdev->panel.dsi_pix_fmt = OMAP_DSS_DSI_FMT_RGB888;
+	dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE |
+		OMAP_DSS_DISPLAY_CAP_TEAR_ELIM;
+
+	mutex_init(&td->lock);
+
+	atomic_set(&td->do_update, 0);
+
+	if (gpio_is_valid(td->reset_gpio)) {
+		r = devm_gpio_request_one(&dssdev->dev, td->reset_gpio,
+				GPIOF_OUT_INIT_LOW, "taal rst");
+		if (r) {
+			dev_err(&dssdev->dev, "failed to request reset gpio\n");
+			return r;
+		}
+	}
+
+	if (gpio_is_valid(td->ext_te_gpio)) {
+		r = devm_gpio_request_one(&dssdev->dev, td->ext_te_gpio,
+				GPIOF_IN, "taal irq");
+		if (r) {
+			dev_err(&dssdev->dev, "GPIO request failed\n");
+			return r;
+		}
+
+		r = devm_request_irq(&dssdev->dev, gpio_to_irq(td->ext_te_gpio),
+				taal_te_isr,
+				IRQF_TRIGGER_RISING,
+				"taal vsync", dssdev);
+
+		if (r) {
+			dev_err(&dssdev->dev, "IRQ request failed\n");
+			return r;
+		}
+
+		INIT_DEFERRABLE_WORK(&td->te_timeout_work,
+					taal_te_timeout_work_callback);
+
+		dev_dbg(&dssdev->dev, "Using GPIO TE\n");
+	}
+
+	td->workqueue = create_singlethread_workqueue("taal_esd");
+	if (td->workqueue == NULL) {
+		dev_err(&dssdev->dev, "can't create ESD workqueue\n");
+		return -ENOMEM;
+	}
+	INIT_DEFERRABLE_WORK(&td->esd_work, taal_esd_work);
+	INIT_DELAYED_WORK(&td->ulps_work, taal_ulps_work);
+
+	taal_hw_reset(dssdev);
+
+	if (td->use_dsi_backlight) {
+		memset(&props, 0, sizeof(struct backlight_properties));
+		props.max_brightness = 255;
+
+		props.type = BACKLIGHT_RAW;
+		bldev = backlight_device_register(dev_name(&dssdev->dev),
+				&dssdev->dev, dssdev, &taal_bl_ops, &props);
+		if (IS_ERR(bldev)) {
+			r = PTR_ERR(bldev);
+			goto err_bl;
+		}
+
+		td->bldev = bldev;
+
+		bldev->props.fb_blank = FB_BLANK_UNBLANK;
+		bldev->props.power = FB_BLANK_UNBLANK;
+		bldev->props.brightness = 255;
+
+		taal_bl_update_status(bldev);
+	}
+
+	r = omap_dsi_request_vc(dssdev, &td->channel);
+	if (r) {
+		dev_err(&dssdev->dev, "failed to get virtual channel\n");
+		goto err_req_vc;
+	}
+
+	r = omap_dsi_set_vc_id(dssdev, td->channel, TCH);
+	if (r) {
+		dev_err(&dssdev->dev, "failed to set VC_ID\n");
+		goto err_vc_id;
+	}
+
+	r = sysfs_create_group(&dssdev->dev.kobj, &taal_attr_group);
+	if (r) {
+		dev_err(&dssdev->dev, "failed to create sysfs files\n");
+		goto err_vc_id;
+	}
+
+	return 0;
+
+err_vc_id:
+	omap_dsi_release_vc(dssdev, td->channel);
+err_req_vc:
+	if (bldev != NULL)
+		backlight_device_unregister(bldev);
+err_bl:
+	destroy_workqueue(td->workqueue);
+	return r;
+}
+
+static void __exit taal_remove(struct omap_dss_device *dssdev)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	struct backlight_device *bldev;
+
+	dev_dbg(&dssdev->dev, "remove\n");
+
+	sysfs_remove_group(&dssdev->dev.kobj, &taal_attr_group);
+	omap_dsi_release_vc(dssdev, td->channel);
+
+	bldev = td->bldev;
+	if (bldev != NULL) {
+		bldev->props.power = FB_BLANK_POWERDOWN;
+		taal_bl_update_status(bldev);
+		backlight_device_unregister(bldev);
+	}
+
+	taal_cancel_ulps_work(dssdev);
+	taal_cancel_esd_work(dssdev);
+	destroy_workqueue(td->workqueue);
+
+	/* reset, to be sure that the panel is in a valid state */
+	taal_hw_reset(dssdev);
+}
+
+static int taal_power_on(struct omap_dss_device *dssdev)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	u8 id1, id2, id3;
+	int r;
+	struct omap_dss_dsi_config dsi_config = {
+		.mode = OMAP_DSS_DSI_CMD_MODE,
+		.pixel_format = OMAP_DSS_DSI_FMT_RGB888,
+		.timings = &dssdev->panel.timings,
+		.hs_clk_min = 150000000,
+		.hs_clk_max = 300000000,
+		.lp_clk_min = 7000000,
+		.lp_clk_max = 10000000,
+	};
+
+	r = omapdss_dsi_configure_pins(dssdev, &td->pin_config);
+	if (r) {
+		dev_err(&dssdev->dev, "failed to configure DSI pins\n");
+		goto err0;
+	};
+
+	r = omapdss_dsi_set_config(dssdev, &dsi_config);
+	if (r) {
+		dev_err(&dssdev->dev, "failed to configure DSI\n");
+		goto err0;
+	}
+
+	r = omapdss_dsi_display_enable(dssdev);
+	if (r) {
+		dev_err(&dssdev->dev, "failed to enable DSI\n");
+		goto err0;
+	}
+
+	taal_hw_reset(dssdev);
+
+	omapdss_dsi_vc_enable_hs(dssdev, td->channel, false);
+
+	r = taal_sleep_out(td);
+	if (r)
+		goto err;
+
+	r = taal_get_id(td, &id1, &id2, &id3);
+	if (r)
+		goto err;
+
+	/* on early Taal revisions CABC is broken */
+	if (id2 == 0x00 || id2 == 0xff || id2 == 0x81)
+		td->cabc_broken = true;
+
+	r = taal_dcs_write_1(td, DCS_BRIGHTNESS, 0xff);
+	if (r)
+		goto err;
+
+	r = taal_dcs_write_1(td, DCS_CTRL_DISPLAY,
+			(1<<2) | (1<<5));	/* BL | BCTRL */
+	if (r)
+		goto err;
+
+	r = taal_dcs_write_1(td, MIPI_DCS_SET_PIXEL_FORMAT,
+		MIPI_DCS_PIXEL_FMT_24BIT);
+	if (r)
+		goto err;
+
+	if (!td->cabc_broken) {
+		r = taal_dcs_write_1(td, DCS_WRITE_CABC, td->cabc_mode);
+		if (r)
+			goto err;
+	}
+
+	r = taal_dcs_write_0(td, MIPI_DCS_SET_DISPLAY_ON);
+	if (r)
+		goto err;
+
+	r = _taal_enable_te(dssdev, td->te_enabled);
+	if (r)
+		goto err;
+
+	r = dsi_enable_video_output(dssdev, td->channel);
+	if (r)
+		goto err;
+
+	td->enabled = 1;
+
+	if (!td->intro_printed) {
+		dev_info(&dssdev->dev, "panel revision %02x.%02x.%02x\n",
+			id1, id2, id3);
+		if (td->cabc_broken)
+			dev_info(&dssdev->dev,
+					"old Taal version, CABC disabled\n");
+		td->intro_printed = true;
+	}
+
+	omapdss_dsi_vc_enable_hs(dssdev, td->channel, true);
+
+	return 0;
+err:
+	dev_err(&dssdev->dev, "error while enabling panel, issuing HW reset\n");
+
+	taal_hw_reset(dssdev);
+
+	omapdss_dsi_display_disable(dssdev, true, false);
+err0:
+	return r;
+}
+
+static void taal_power_off(struct omap_dss_device *dssdev)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	int r;
+
+	dsi_disable_video_output(dssdev, td->channel);
+
+	r = taal_dcs_write_0(td, MIPI_DCS_SET_DISPLAY_OFF);
+	if (!r)
+		r = taal_sleep_in(td);
+
+	if (r) {
+		dev_err(&dssdev->dev,
+				"error disabling panel, issuing HW reset\n");
+		taal_hw_reset(dssdev);
+	}
+
+	omapdss_dsi_display_disable(dssdev, true, false);
+
+	td->enabled = 0;
+}
+
+static int taal_panel_reset(struct omap_dss_device *dssdev)
+{
+	dev_err(&dssdev->dev, "performing LCD reset\n");
+
+	taal_power_off(dssdev);
+	taal_hw_reset(dssdev);
+	return taal_power_on(dssdev);
+}
+
+static int taal_enable(struct omap_dss_device *dssdev)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	int r;
+
+	dev_dbg(&dssdev->dev, "enable\n");
+
+	mutex_lock(&td->lock);
+
+	if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) {
+		r = -EINVAL;
+		goto err;
+	}
+
+	dsi_bus_lock(dssdev);
+
+	r = taal_power_on(dssdev);
+
+	dsi_bus_unlock(dssdev);
+
+	if (r)
+		goto err;
+
+	taal_queue_esd_work(dssdev);
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	mutex_unlock(&td->lock);
+
+	return 0;
+err:
+	dev_dbg(&dssdev->dev, "enable failed\n");
+	mutex_unlock(&td->lock);
+	return r;
+}
+
+static void taal_disable(struct omap_dss_device *dssdev)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+
+	dev_dbg(&dssdev->dev, "disable\n");
+
+	mutex_lock(&td->lock);
+
+	taal_cancel_ulps_work(dssdev);
+	taal_cancel_esd_work(dssdev);
+
+	dsi_bus_lock(dssdev);
+
+	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
+		int r;
+
+		r = taal_wake_up(dssdev);
+		if (!r)
+			taal_power_off(dssdev);
+	}
+
+	dsi_bus_unlock(dssdev);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+
+	mutex_unlock(&td->lock);
+}
+
+static void taal_framedone_cb(int err, void *data)
+{
+	struct omap_dss_device *dssdev = data;
+	dev_dbg(&dssdev->dev, "framedone, err %d\n", err);
+	dsi_bus_unlock(dssdev);
+}
+
+static irqreturn_t taal_te_isr(int irq, void *data)
+{
+	struct omap_dss_device *dssdev = data;
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	int old;
+	int r;
+
+	old = atomic_cmpxchg(&td->do_update, 1, 0);
+
+	if (old) {
+		cancel_delayed_work(&td->te_timeout_work);
+
+		r = omap_dsi_update(dssdev, td->channel, taal_framedone_cb,
+				dssdev);
+		if (r)
+			goto err;
+	}
+
+	return IRQ_HANDLED;
+err:
+	dev_err(&dssdev->dev, "start update failed\n");
+	dsi_bus_unlock(dssdev);
+	return IRQ_HANDLED;
+}
+
+static void taal_te_timeout_work_callback(struct work_struct *work)
+{
+	struct taal_data *td = container_of(work, struct taal_data,
+					te_timeout_work.work);
+	struct omap_dss_device *dssdev = td->dssdev;
+
+	dev_err(&dssdev->dev, "TE not received for 250ms!\n");
+
+	atomic_set(&td->do_update, 0);
+	dsi_bus_unlock(dssdev);
+}
+
+static int taal_update(struct omap_dss_device *dssdev,
+				    u16 x, u16 y, u16 w, u16 h)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	int r;
+
+	dev_dbg(&dssdev->dev, "update %d, %d, %d x %d\n", x, y, w, h);
+
+	mutex_lock(&td->lock);
+	dsi_bus_lock(dssdev);
+
+	r = taal_wake_up(dssdev);
+	if (r)
+		goto err;
+
+	if (!td->enabled) {
+		r = 0;
+		goto err;
+	}
+
+	/* XXX no need to send this every frame, but dsi break if not done */
+	r = taal_set_update_window(td, 0, 0,
+			dssdev->panel.timings.x_res,
+			dssdev->panel.timings.y_res);
+	if (r)
+		goto err;
+
+	if (td->te_enabled && gpio_is_valid(td->ext_te_gpio)) {
+		schedule_delayed_work(&td->te_timeout_work,
+				msecs_to_jiffies(250));
+		atomic_set(&td->do_update, 1);
+	} else {
+		r = omap_dsi_update(dssdev, td->channel, taal_framedone_cb,
+				dssdev);
+		if (r)
+			goto err;
+	}
+
+	/* note: no bus_unlock here. unlock is in framedone_cb */
+	mutex_unlock(&td->lock);
+	return 0;
+err:
+	dsi_bus_unlock(dssdev);
+	mutex_unlock(&td->lock);
+	return r;
+}
+
+static int taal_sync(struct omap_dss_device *dssdev)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+
+	dev_dbg(&dssdev->dev, "sync\n");
+
+	mutex_lock(&td->lock);
+	dsi_bus_lock(dssdev);
+	dsi_bus_unlock(dssdev);
+	mutex_unlock(&td->lock);
+
+	dev_dbg(&dssdev->dev, "sync done\n");
+
+	return 0;
+}
+
+static int _taal_enable_te(struct omap_dss_device *dssdev, bool enable)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	int r;
+
+	if (enable)
+		r = taal_dcs_write_1(td, MIPI_DCS_SET_TEAR_ON, 0);
+	else
+		r = taal_dcs_write_0(td, MIPI_DCS_SET_TEAR_OFF);
+
+	if (!gpio_is_valid(td->ext_te_gpio))
+		omapdss_dsi_enable_te(dssdev, enable);
+
+	/* possible panel bug */
+	msleep(100);
+
+	return r;
+}
+
+static int taal_enable_te(struct omap_dss_device *dssdev, bool enable)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	int r;
+
+	mutex_lock(&td->lock);
+
+	if (td->te_enabled == enable)
+		goto end;
+
+	dsi_bus_lock(dssdev);
+
+	if (td->enabled) {
+		r = taal_wake_up(dssdev);
+		if (r)
+			goto err;
+
+		r = _taal_enable_te(dssdev, enable);
+		if (r)
+			goto err;
+	}
+
+	td->te_enabled = enable;
+
+	dsi_bus_unlock(dssdev);
+end:
+	mutex_unlock(&td->lock);
+
+	return 0;
+err:
+	dsi_bus_unlock(dssdev);
+	mutex_unlock(&td->lock);
+
+	return r;
+}
+
+static int taal_get_te(struct omap_dss_device *dssdev)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	int r;
+
+	mutex_lock(&td->lock);
+	r = td->te_enabled;
+	mutex_unlock(&td->lock);
+
+	return r;
+}
+
+static int taal_run_test(struct omap_dss_device *dssdev, int test_num)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	u8 id1, id2, id3;
+	int r;
+
+	mutex_lock(&td->lock);
+
+	if (!td->enabled) {
+		r = -ENODEV;
+		goto err1;
+	}
+
+	dsi_bus_lock(dssdev);
+
+	r = taal_wake_up(dssdev);
+	if (r)
+		goto err2;
+
+	r = taal_dcs_read_1(td, DCS_GET_ID1, &id1);
+	if (r)
+		goto err2;
+	r = taal_dcs_read_1(td, DCS_GET_ID2, &id2);
+	if (r)
+		goto err2;
+	r = taal_dcs_read_1(td, DCS_GET_ID3, &id3);
+	if (r)
+		goto err2;
+
+	dsi_bus_unlock(dssdev);
+	mutex_unlock(&td->lock);
+	return 0;
+err2:
+	dsi_bus_unlock(dssdev);
+err1:
+	mutex_unlock(&td->lock);
+	return r;
+}
+
+static int taal_memory_read(struct omap_dss_device *dssdev,
+		void *buf, size_t size,
+		u16 x, u16 y, u16 w, u16 h)
+{
+	int r;
+	int first = 1;
+	int plen;
+	unsigned buf_used = 0;
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+
+	if (size < w * h * 3)
+		return -ENOMEM;
+
+	mutex_lock(&td->lock);
+
+	if (!td->enabled) {
+		r = -ENODEV;
+		goto err1;
+	}
+
+	size = min(w * h * 3,
+			dssdev->panel.timings.x_res *
+			dssdev->panel.timings.y_res * 3);
+
+	dsi_bus_lock(dssdev);
+
+	r = taal_wake_up(dssdev);
+	if (r)
+		goto err2;
+
+	/* plen 1 or 2 goes into short packet. until checksum error is fixed,
+	 * use short packets. plen 32 works, but bigger packets seem to cause
+	 * an error. */
+	if (size % 2)
+		plen = 1;
+	else
+		plen = 2;
+
+	taal_set_update_window(td, x, y, w, h);
+
+	r = dsi_vc_set_max_rx_packet_size(dssdev, td->channel, plen);
+	if (r)
+		goto err2;
+
+	while (buf_used < size) {
+		u8 dcs_cmd = first ? 0x2e : 0x3e;
+		first = 0;
+
+		r = dsi_vc_dcs_read(dssdev, td->channel, dcs_cmd,
+				buf + buf_used, size - buf_used);
+
+		if (r < 0) {
+			dev_err(&dssdev->dev, "read error\n");
+			goto err3;
+		}
+
+		buf_used += r;
+
+		if (r < plen) {
+			dev_err(&dssdev->dev, "short read\n");
+			break;
+		}
+
+		if (signal_pending(current)) {
+			dev_err(&dssdev->dev, "signal pending, "
+					"aborting memory read\n");
+			r = -ERESTARTSYS;
+			goto err3;
+		}
+	}
+
+	r = buf_used;
+
+err3:
+	dsi_vc_set_max_rx_packet_size(dssdev, td->channel, 1);
+err2:
+	dsi_bus_unlock(dssdev);
+err1:
+	mutex_unlock(&td->lock);
+	return r;
+}
+
+static void taal_ulps_work(struct work_struct *work)
+{
+	struct taal_data *td = container_of(work, struct taal_data,
+			ulps_work.work);
+	struct omap_dss_device *dssdev = td->dssdev;
+
+	mutex_lock(&td->lock);
+
+	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE || !td->enabled) {
+		mutex_unlock(&td->lock);
+		return;
+	}
+
+	dsi_bus_lock(dssdev);
+
+	taal_enter_ulps(dssdev);
+
+	dsi_bus_unlock(dssdev);
+	mutex_unlock(&td->lock);
+}
+
+static void taal_esd_work(struct work_struct *work)
+{
+	struct taal_data *td = container_of(work, struct taal_data,
+			esd_work.work);
+	struct omap_dss_device *dssdev = td->dssdev;
+	u8 state1, state2;
+	int r;
+
+	mutex_lock(&td->lock);
+
+	if (!td->enabled) {
+		mutex_unlock(&td->lock);
+		return;
+	}
+
+	dsi_bus_lock(dssdev);
+
+	r = taal_wake_up(dssdev);
+	if (r) {
+		dev_err(&dssdev->dev, "failed to exit ULPS\n");
+		goto err;
+	}
+
+	r = taal_dcs_read_1(td, MIPI_DCS_GET_DIAGNOSTIC_RESULT, &state1);
+	if (r) {
+		dev_err(&dssdev->dev, "failed to read Taal status\n");
+		goto err;
+	}
+
+	/* Run self diagnostics */
+	r = taal_sleep_out(td);
+	if (r) {
+		dev_err(&dssdev->dev, "failed to run Taal self-diagnostics\n");
+		goto err;
+	}
+
+	r = taal_dcs_read_1(td, MIPI_DCS_GET_DIAGNOSTIC_RESULT, &state2);
+	if (r) {
+		dev_err(&dssdev->dev, "failed to read Taal status\n");
+		goto err;
+	}
+
+	/* Each sleep out command will trigger a self diagnostic and flip
+	 * Bit6 if the test passes.
+	 */
+	if (!((state1 ^ state2) & (1 << 6))) {
+		dev_err(&dssdev->dev, "LCD self diagnostics failed\n");
+		goto err;
+	}
+	/* Self-diagnostics result is also shown on TE GPIO line. We need
+	 * to re-enable TE after self diagnostics */
+	if (td->te_enabled && gpio_is_valid(td->ext_te_gpio)) {
+		r = taal_dcs_write_1(td, MIPI_DCS_SET_TEAR_ON, 0);
+		if (r)
+			goto err;
+	}
+
+	dsi_bus_unlock(dssdev);
+
+	taal_queue_esd_work(dssdev);
+
+	mutex_unlock(&td->lock);
+	return;
+err:
+	dev_err(&dssdev->dev, "performing LCD reset\n");
+
+	taal_panel_reset(dssdev);
+
+	dsi_bus_unlock(dssdev);
+
+	taal_queue_esd_work(dssdev);
+
+	mutex_unlock(&td->lock);
+}
+
+static struct omap_dss_driver taal_driver = {
+	.probe		= taal_probe,
+	.remove		= __exit_p(taal_remove),
+
+	.enable		= taal_enable,
+	.disable	= taal_disable,
+
+	.update		= taal_update,
+	.sync		= taal_sync,
+
+	.get_resolution	= taal_get_resolution,
+	.get_recommended_bpp = omapdss_default_get_recommended_bpp,
+
+	.enable_te	= taal_enable_te,
+	.get_te		= taal_get_te,
+
+	.run_test	= taal_run_test,
+	.memory_read	= taal_memory_read,
+
+	.driver         = {
+		.name   = "taal",
+		.owner  = THIS_MODULE,
+	},
+};
+
+static int __init taal_init(void)
+{
+	omap_dss_register_driver(&taal_driver);
+
+	return 0;
+}
+
+static void __exit taal_exit(void)
+{
+	omap_dss_unregister_driver(&taal_driver);
+}
+
+module_init(taal_init);
+module_exit(taal_exit);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@nokia.com>");
+MODULE_DESCRIPTION("Taal Driver");
+MODULE_LICENSE("GPL");
-- 
cgit v1.3.1